summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts730
1 files changed, 615 insertions, 115 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 568c6be1ceaa..98e71b933437 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -21,7 +21,38 @@
model = "Lenovo ThinkPad X13s";
compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
- backlight {
+ aliases {
+ i2c4 = &i2c4;
+ i2c21 = &i2c21;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9380-codec";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcd_default>;
+
+ reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_s10b>;
+ vdd-rxtx-supply = <&vreg_s10b>;
+ vdd-io-supply = <&vreg_s10b>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pmc8280c_lpg 3 1000000>;
enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
@@ -31,65 +62,113 @@
pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
};
- thermal-zones {
- skin-temp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <0>;
- thermal-sensors = <&pmk8280_adc_tm 5>;
+ gpio-keys {
+ compatible = "gpio-keys";
- trips {
- skin_temp_alert0: trip-point0 {
- temperature = <55000>;
- hysteresis = <1000>;
- type = "passive";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hall_int_n_default>;
+
+ switch-lid {
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con0_hs: endpoint {
+ remote-endpoint = <&usb_0_role_switch>;
+ };
};
- skin_temp_alert1: trip-point1 {
- temperature = <58000>;
- hysteresis = <1000>;
- type = "passive";
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con0_ss: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
};
- skin-temp-crit {
- temperature = <73000>;
- hysteresis = <1000>;
- type = "critical";
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con0_sbu: endpoint {
+ remote-endpoint = <&usb0_sbu_mux>;
+ };
};
};
+ };
- cooling-maps {
- map0 {
- trip = <&skin_temp_alert0>;
- cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con1_hs: endpoint {
+ remote-endpoint = <&usb_1_role_switch>;
+ };
};
- map1 {
- trip = <&skin_temp_alert1>;
- cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con1_ss: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con1_sbu: endpoint {
+ remote-endpoint = <&usb1_sbu_mux>;
+ };
};
};
};
};
- gpio-keys {
- compatible = "gpio-keys";
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
pinctrl-names = "default";
- pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-0 = <&edp_reg_en>;
- switch-lid {
- gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- wakeup-source;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- };
+ regulator-boot-on;
};
vreg_edp_bl: regulator-edp-bl {
@@ -141,6 +220,16 @@
regulator-boot-on;
};
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VPH_VCC3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: regulator-wlan {
compatible = "regulator-fixed";
@@ -172,15 +261,117 @@
regulator-boot-on;
};
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ thermal-zones {
+ skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8280_adc_tm 5>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <55000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <58000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <73000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ usb0-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+ svid = /bits/ 16 <0xff01>;
+
+ port {
+ usb0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con0_sbu>;
+ };
+ };
+ };
+
+ usb1-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+ svid = /bits/ 16 <0xff01>;
+
+ port {
+ usb1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con1_sbu>;
+ };
+ };
+ };
};
&apps_rsc {
- pmc8280-1-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "b";
vdd-l3-l5-supply = <&vreg_s11b>;
+ vreg_s10b: smps10 {
+ regulator-name = "vreg_s10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_s11b: smps11 {
regulator-name = "vreg_s11b";
regulator-min-microvolt = <1272000>;
@@ -188,6 +379,13 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_s12b: smps12 {
+ regulator-name = "vreg_s12b";
+ regulator-min-microvolt = <984000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l3b: ldo3 {
regulator-name = "vreg_l3b";
regulator-min-microvolt = <1200000>;
@@ -209,13 +407,13 @@
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-boot-on;
- regulator-always-on; /* FIXME: VDD_A_EDP_0_0P9 */
};
};
- pmc8280c-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
+ vdd-bob-supply = <&vreg_vph_pwr>;
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
@@ -237,9 +435,16 @@
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
};
- pmc8280-2-rpmh-regulators {
+ regulators-2 {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "d";
@@ -282,6 +487,148 @@
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&mdss0_dp3 {
+ compatible = "qcom,sc8280xp-edp";
+
+ data-lanes = <0 1 2 3>;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ backlight = <&backlight>;
+ power-supply = <&vreg_edp_3p3>;
+
+ ports {
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_out>;
+ };
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_out: endpoint {
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ vdda-phy-supply = <&vreg_l6b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_default>;
+
+ status = "okay";
+
+ /* FIXME: verify */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
+&i2c21 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c21_default>;
+
+ status = "okay";
+
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpad_default>;
+
+ wakeup-source;
+
+ status = "disabled";
+ };
+
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpad_default>;
+
+ wakeup-source;
+ };
+
+ keyboard@68 {
+ compatible = "hid-over-i2c";
+ reg = <0x68>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&kybd_default>;
+
+ wakeup-source;
+ };
+};
+
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
@@ -501,98 +848,157 @@
status = "okay";
};
-&qup0_i2c4 {
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>;
-
+&qup1 {
status = "okay";
+};
- /* FIXME: verify */
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
+&qup2 {
+ status = "okay";
+};
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
- pinctrl-names = "default";
- pinctrl-0 = <&ts0_default>;
- };
+ status = "okay";
};
-&qup1 {
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
+
status = "okay";
};
-&qup2 {
+&rxmacro {
status = "okay";
};
-&qup2_i2c5 {
- clock-frequency = <400000>;
+&sound {
+ compatible = "qcom,sc8280xp-sndcard";
+ model = "SC8280XP-LENOVO-X13S";
+ audio-routing =
+ "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "TX DMIC0", "MIC BIAS1",
+ "TX DMIC1", "MIC BIAS2",
+ "TX DMIC2", "MIC BIAS3",
+ "TX SWR_ADC1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&qup2_i2c5_default>;
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+ };
- status = "okay";
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
- touchpad@15 {
- compatible = "hid-over-i2c";
- reg = <0x15>;
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&tpad_default>;
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
- wakeup-source;
+ wsa-dai-link {
+ link-name = "WSA Playback";
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
- status = "disabled";
- };
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+ };
- touchpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
- hid-descr-addr = <0x20>;
- interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
+ va-dai-link {
+ link-name = "VA Capture";
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&tpad_default>;
+ platform {
+ sound-dai = <&q6apm>;
+ };
- wakeup-source;
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
};
+};
- keyboard@68 {
- compatible = "hid-over-i2c";
- reg = <0x68>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
+&swr0 {
+ status = "okay";
+ left_spkr: wsa8830-left@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
pinctrl-names = "default";
- pinctrl-0 = <&kybd_default>;
+ pinctrl-0 = <&spkr_1_sd_n_default>;
+ powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ vdd-supply = <&vreg_s10b>;
+ };
- wakeup-source;
+ right_spkr: wsa8830-right@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spkr_2_sd_n_default>;
+ powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ vdd-supply = <&vreg_s10b>;
};
};
-&remoteproc_adsp {
- firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
-
+&swr1 {
status = "okay";
+
+ wcd_rx: wcd9380-rx@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
};
-&remoteproc_nsp0 {
- firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
+&swr2 {
+ status = "okay";
+
+ wcd_tx: wcd9380-tx@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <1 1 2 3>;
+ };
+};
+&txmacro {
status = "okay";
};
@@ -601,7 +1007,6 @@
};
&usb_0_dwc3 {
- /* TODO: Define USB-C connector properly */
dr_mode = "host";
};
@@ -620,12 +1025,15 @@
status = "okay";
};
+&usb_0_role_switch {
+ remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
- /* TODO: Define USB-C connector properly */
dr_mode = "host";
};
@@ -644,12 +1052,35 @@
status = "okay";
};
+&usb_1_role_switch {
+ remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_s10b>;
+
+ qcom,dmic-sample-rate = <600000>;
+
+ status = "okay";
+};
+
+&wsamacro {
+ status = "okay";
+};
+
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
+&lpass_tlmm {
+ status = "okay";
+};
+
&pmc8280_1_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio8";
@@ -691,6 +1122,13 @@
&tlmm {
gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
hall_int_n_default: hall-int-n-state {
pins = "gpio107";
function = "gpio";
@@ -698,6 +1136,20 @@
bias-disable;
};
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ i2c21_default: i2c21-default-state {
+ pins = "gpio81", "gpio82";
+ function = "qup21";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
kybd_default: kybd-default-state {
disable-pins {
pins = "gpio102";
@@ -794,18 +1246,24 @@
};
};
- qup0_i2c4_default: qup0-i2c4-default-state {
- pins = "gpio171", "gpio172";
- function = "qup4";
- bias-disable;
- drive-strength = <16>;
+ spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+ perst-n-pins {
+ pins = "gpio178";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
};
- qup2_i2c5_default: qup2-i2c5-default-state {
- pins = "gpio81", "gpio82";
- function = "qup21";
- bias-disable;
- drive-strength = <16>;
+ spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+ perst-n-pins {
+ pins = "gpio179";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
};
tpad_default: tpad-default-state {
@@ -830,4 +1288,46 @@
drive-strength = <16>;
};
};
+
+ usb0_sbu_default: usb0-sbu-state {
+ oe-n-pins {
+ pins = "gpio101";
+ function = "gpio";
+ bias-disable;
+ drive-strengh = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio164";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ usb1_sbu_default: usb1-sbu-state {
+ oe-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ bias-disable;
+ drive-strengh = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio47";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ wcd_default: wcd-default-state {
+ reset-pins {
+ pins = "gpio106";
+ function = "gpio";
+ bias-disable;
+ };
+ };
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 16:56:38 +0300