diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 417 |
1 files changed, 411 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index bc67e8c1fe4d..2ee2561b57b1 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -19,6 +19,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" @@ -92,10 +93,22 @@ }; }; + msm_therm_sensor: thermal-sensor-msm { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + + rear_cam_sensor: thermal-sensor-rear-cam { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + thermal-zones { chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -108,8 +121,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -120,6 +131,119 @@ }; }; }; + + pa0-thermal { + thermal-sensors = <&pm6150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa1-thermal { + thermal-sensors = <&pm6150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pm6150l_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&rear_cam_sensor>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rfc-flash-thermal { + thermal-sensors = <&pm6150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&msm_therm_sensor>; + + trips { + trip0 { + temperature = <45000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <55000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; }; }; @@ -134,124 +258,145 @@ qcom,pmic-id = "a"; vreg_s1a: smps1 { + regulator-name = "vreg_s1a"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; vreg_s2a: smps2 { + regulator-name = "vreg_s2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <2048000>; }; vreg_l2a: ldo2 { + regulator-name = "vreg_l2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; regulator-min-microvolt = <352000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12a: ldo12 { + regulator-name = "vreg_l12a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; regulator-min-microvolt = <570000>; regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14a: ldo14 { + regulator-name = "vreg_l14a"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15a: ldo15 { + regulator-name = "vreg_l15a"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16a: ldo16 { + regulator-name = "vreg_l16a"; regulator-min-microvolt = <830000>; regulator-max-microvolt = <921000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a: ldo18 { + regulator-name = "vreg_l18a"; regulator-min-microvolt = <788000>; regulator-max-microvolt = <1049000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19a: ldo19 { + regulator-name = "vreg_l19a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l20a: ldo20 { + regulator-name = "vreg_l20a"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l21a: ldo21 { + regulator-name = "vreg_l21a"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <825000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l22a: ldo22 { + regulator-name = "vreg_l22a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -263,41 +408,48 @@ qcom,pmic-id = "e"; vreg_s8e: smps8 { + regulator-name = "vreg_s8e"; regulator-min-microvolt = <313000>; regulator-max-microvolt = <1395000>; }; vreg_l1e: ldo1 { + regulator-name = "vreg_l1e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2e: ldo2 { + regulator-name = "vreg_l2e"; regulator-min-microvolt = <1170000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3e: ldo3 { + regulator-name = "vreg_l3e"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1299000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4e: ldo4 { + regulator-name = "vreg_l4e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5e: ldo5 { + regulator-name = "vreg_l5e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -307,18 +459,21 @@ }; vreg_l7e: ldo7 { + regulator-name = "vreg_l7e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9e: ldo9 { + regulator-name = "vreg_l9e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -328,18 +483,21 @@ }; vreg_l10e: ldo10 { + regulator-name = "vreg_l10e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11e: ldo11 { + regulator-name = "vreg_l11e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <5492000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -407,7 +565,79 @@ }; &i2c10 { - /* PM8008 PMIC @ 8 and 9 */ + clock-frequency = <400000>; + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8e>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s2a>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2904000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3140000>; + }; + }; + }; + /* PX8618 @ 26 */ /* SMB1395 PMIC @ 34 */ /* awinic,aw8695 @ 5a */ @@ -462,6 +692,91 @@ status = "okay"; }; +&pm6150l_adc { + pinctrl-0 = <&pm6150l_adc_default>; + pinctrl-names = "default"; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "pa_therm1"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "msm_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "pa_therm0"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@53 { + reg = <ADC5_GPIO2_100K_PU>; + label = "rear_cam_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@54 { + reg = <ADC5_GPIO3_100K_PU>; + label = "rear_cam_flash_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@55 { + reg = <ADC5_GPIO4_100K_PU>; + label = "quiet_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; +}; + +&pm6150l_adc_tm { + status = "okay"; + + pa-therm1@0 { + reg = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + pa-therm0@1 { + reg = <1>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + rear-cam-flash-therm@2 { + reg = <2>; + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + quiet-therm@3 { + reg = <3>; + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pm6150l_flash { status = "okay"; @@ -484,6 +799,14 @@ }; }; +&pm6150l_gpios { + pm6150l_adc_default: adc-default-state { + pins = "gpio6", "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + &pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; @@ -543,6 +866,64 @@ }; }; +&pm7250b_typec { + vdd-pdphy-supply = <&vreg_l3a>; + + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + /* + * Disable USB Power Delivery for now, seems to need extra work + * to support role switching while also letting the battery + * charge still - without charger driver + */ + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm7250b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; + }; + }; + + port@1 { + reg = <1>; + pm7250b_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm7250b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1500000>; + status = "okay"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -673,6 +1054,22 @@ */ bias-pull-up; }; + + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio58"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; &uart1 { @@ -726,7 +1123,11 @@ &usb_1_dwc3 { maximum-speed = "super-speed"; - dr_mode = "peripheral"; + dr_mode = "otg"; +}; + +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm7250b_hs_in>; }; &usb_1_hsphy { @@ -744,6 +1145,10 @@ status = "okay"; }; +&usb_1_qmpphy_out { + remote-endpoint = <&pm7250b_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; |