diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sm8250.dtsi | 132 |
1 files changed, 70 insertions, 62 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index cf0c97bd5ad3..bc773e210023 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -336,7 +338,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -426,7 +428,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -521,7 +523,7 @@ }; }; - cpu7_opp_table: cpu7_opp_table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -628,7 +630,7 @@ firmware { scm: scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-sm8250", "qcom,scm"; #reset-cells = <1>; }; }; @@ -702,6 +704,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -914,25 +935,6 @@ clock-names = "core"; }; - qup_opp_table: qup-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8250-gpi-dma"; reg = <0 0x00800000 0 0x70000>; @@ -1884,6 +1886,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_0_pipe_clk"; }; }; @@ -1990,6 +1994,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; }; @@ -2096,6 +2102,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_2_pipe_clk"; }; }; @@ -2188,11 +2196,11 @@ wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; - clocks = <&audiocc 1>, - <&audiocc 0>, + clocks = <&audiocc LPASS_CDC_WSA_MCLK>, + <&audiocc LPASS_CDC_WSA_NPL>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&aoncc 0>, + <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; @@ -2239,7 +2247,7 @@ vamacro: codec@3370000 { compatible = "qcom,sm8250-lpass-va-macro"; reg = <0 0x03370000 0 0x1000>; - clocks = <&aoncc 0>, + clocks = <&aoncc LPASS_CDC_VA_MCLK>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; @@ -2569,7 +2577,7 @@ }; gmu: gmu@3d6a000 { - compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x30000>, <0 0x3de0000 0 0x10000>, @@ -2623,7 +2631,7 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2917,7 +2925,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2937,7 +2945,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -3010,11 +3018,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -3065,11 +3075,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -3123,7 +3135,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-720000000 { @@ -3407,6 +3419,7 @@ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3429,9 +3442,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "bus", "nrt_bus", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <460000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3444,7 +3454,7 @@ #size-cells = <2>; ranges; - mdss_mdp: mdp@ae01000 { + mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -3456,10 +3466,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; @@ -3486,7 +3494,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { @@ -3656,7 +3664,7 @@ status = "disabled"; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { @@ -3734,7 +3742,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8250-aoss-qmp"; + compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -4867,9 +4875,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -4878,49 +4886,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; |