diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8550-mtp.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 61 |
1 files changed, 59 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index ec86c5f38045..f29cce5186ac 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -18,6 +18,7 @@ / { model = "Qualcomm Technologies, Inc. SM8550 MTP"; compatible = "qcom,sm8550-mtp", "qcom,sm8550"; + chassis-type = "handset"; aliases { serial0 = &uart7; @@ -80,7 +81,15 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; @@ -186,6 +195,7 @@ vdd-bob1-supply = <&vph_pwr>; vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>; vdd-l2-l13-l14-supply = <&vreg_bob1>; vdd-l3-supply = <&vreg_s4g_1p3>; vdd-l5-l16-supply = <&vreg_bob1>; @@ -500,6 +510,30 @@ }; }; +&i2c_master_hub_0 { + status = "okay"; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio17"; @@ -558,6 +592,15 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; @@ -781,7 +824,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -797,9 +840,23 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p91>; + orientation-switch; + status = "okay"; }; +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + &xo_board { clock-frequency = <76800000>; }; |