diff options
Diffstat (limited to 'arch/arm64/boot')
23 files changed, 167 insertions, 79 deletions
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 2f27619d8abd..8b4d280b1e7e 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -751,12 +751,26 @@ polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 0>; + trips { + pmic_crit0: trip0 { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; soc { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 3>; + trips { + soc_crit0: trip0 { + temperature = <80000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; big_cluster_thermal_zone: big-cluster { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 421d879013d7..260d045dbd9a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -779,6 +779,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -788,6 +791,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index f1b9cc8714dc..348d9e3a9125 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -532,6 +532,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -541,6 +544,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 6680fb2a6dc9..8c76d86cb756 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1385,6 +1385,9 @@ #address-cells = <1>; #size-cells = <0>; little-endian; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -1395,6 +1398,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 82a1c4488378..10370d1a6c6d 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "per", "ahb"; + <&sdhc0_lpcg IMX_LPCG_CLK_0>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>; + clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; }; @@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, - <&sdhc1_lpcg IMX_LPCG_CLK_5>, - <&sdhc1_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "per", "ahb"; + <&sdhc1_lpcg IMX_LPCG_CLK_0>, + <&sdhc1_lpcg IMX_LPCG_CLK_5>; + clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, - <&sdhc2_lpcg IMX_LPCG_CLK_5>, - <&sdhc2_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "per", "ahb"; + <&sdhc2_lpcg IMX_LPCG_CLK_0>, + <&sdhc2_lpcg IMX_LPCG_CLK_5>; + clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index 32f6f2f50c10..43e89859c044 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -250,21 +250,21 @@ /* SODIMM 96 */ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 /* CPLD_D[7] */ - MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x184 /* CPLD_D[6] */ - MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x184 /* CPLD_D[5] */ - MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x184 /* CPLD_D[4] */ - MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x184 /* CPLD_D[3] */ - MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x184 /* CPLD_D[2] */ - MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x184 /* CPLD_D[1] */ - MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x184 /* CPLD_D[0] */ - MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x184 /* KBD_intK */ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4 /* DISP_reset */ diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 7e0aeb2db305..a0aeac619929 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -34,11 +34,25 @@ off-on-delay-us = <12000>; }; - extcon_usbotg1: extcon-usbotg1 { - compatible = "linux,extcon-usb-gpio"; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X19"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_extcon>; - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_usb1_connector>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; }; }; @@ -105,13 +119,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; - extcon = <&extcon_usbotg1>; srp-disable; hnp-disable; adp-disable; power-active-high; over-current-active-low; + usb-role-switch; status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; &usbotg2 { @@ -231,7 +251,7 @@ <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>; }; - pinctrl_usb1_extcon: usb1-extcongrp { + pinctrl_usb1_connector: usb1-connectorgrp { fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index afb90f59c83c..50ef92915c67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -276,6 +276,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg1>; }; usbphynop2: usbphynop2 { @@ -285,6 +286,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg2>; }; soc: soc@0 { @@ -674,13 +676,11 @@ pgc_otg1: power-domain@2 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_OTG1>; - power-domains = <&pgc_hsiomix>; }; pgc_otg2: power-domain@3 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_OTG2>; - power-domains = <&pgc_hsiomix>; }; pgc_gpumix: power-domain@4 { @@ -1186,7 +1186,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; - power-domains = <&pgc_otg1>; + power-domains = <&pgc_hsiomix>; status = "disabled"; }; @@ -1206,7 +1206,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; - power-domains = <&pgc_otg2>; + power-domains = <&pgc_hsiomix>; status = "disabled"; }; @@ -1244,10 +1244,10 @@ clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index cb2836bfbd95..67b554ba690c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -662,7 +662,6 @@ pgc_otg1: power-domain@1 { #power-domain-cells = <0>; reg = <IMX8MN_POWER_DOMAIN_OTG1>; - power-domains = <&pgc_hsiomix>; }; pgc_gpumix: power-domain@2 { @@ -1076,7 +1075,7 @@ assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; - power-domains = <&pgc_otg1>; + power-domains = <&pgc_hsiomix>; status = "disabled"; }; @@ -1103,7 +1102,7 @@ gpmi: nand-controller@33002000 { compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -1175,5 +1174,6 @@ assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 7b712d1888ea..5dcd1de586b5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -354,16 +354,6 @@ "SODIMM_82", "SODIMM_70", "SODIMM_72"; - - ctrl-sleep-moci-hog { - gpio-hog; - /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ - gpios = <29 GPIO_ACTIVE_HIGH>; - line-name = "CTRL_SLEEP_MOCI#"; - output-high; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; - }; }; &gpio3 { @@ -432,6 +422,16 @@ "SODIMM_256", "SODIMM_48", "SODIMM_44"; + + ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <29 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; + }; }; /* On-module I2C */ diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h index 4298a145f8a9..4298a145f8a9 100755..100644 --- a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 3a5713bb4880..0247866fc86b 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -451,7 +451,7 @@ clocks = <&clk IMX93_CLK_GPIO2_GATE>, <&clk IMX93_CLK_GPIO2_GATE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 32 32>; + gpio-ranges = <&iomuxc 0 4 30>; }; gpio3: gpio@43820080 { @@ -465,7 +465,8 @@ clocks = <&clk IMX93_CLK_GPIO3_GATE>, <&clk IMX93_CLK_GPIO3_GATE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 64 32>; + gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, + <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; }; gpio4: gpio@43830080 { @@ -479,7 +480,7 @@ clocks = <&clk IMX93_CLK_GPIO4_GATE>, <&clk IMX93_CLK_GPIO4_GATE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 96 32>; + gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; }; gpio1: gpio@47400080 { @@ -493,7 +494,7 @@ clocks = <&clk IMX93_CLK_GPIO1_GATE>, <&clk IMX93_CLK_GPIO1_GATE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 0 32>; + gpio-ranges = <&iomuxc 0 92 16>; }; s4muap: mailbox@47520000 { @@ -501,7 +502,7 @@ reg = <0x47520000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "txirq", "rxirq"; + interrupt-names = "tx", "rx"; #mbox-cells = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a47acf9bdf24..a721cdd80489 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -668,7 +668,7 @@ apcs_glb: mailbox@b111000 { compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0x6000>; + reg = <0x0b111000 0x1000>; #clock-cells = <1>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c0a2baffa49d..aba717644391 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3504,7 +3504,7 @@ }; saw3: syscon@9a10000 { - compatible = "qcom,tcsr-msm8996", "syscon"; + compatible = "syscon"; reg = <0x09a10000 0x1000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 87ab0e1ecd16..4dee790f1049 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -43,7 +43,6 @@ regulator-always-on; regulator-boot-on; - regulator-allow-set-load; vin-supply = <&vreg_3p3>; }; @@ -137,6 +136,9 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a_1p8: ldo7 { @@ -152,6 +154,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a_0p8: ldo11 { @@ -258,6 +263,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_1p8: ldo7 { @@ -273,6 +281,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index b608b82dff03..2c62ba6a49c5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -83,6 +83,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { @@ -98,6 +101,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { @@ -113,6 +119,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l17c: ldo17 { @@ -121,6 +130,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 212580316d3e..4cdc88d33944 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2296,7 +2296,8 @@ lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; - reg = <0 0x03300000 0 0x30000>; + reg = <0 0x03300000 0 0x30000>, + <0 0x032a9000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..5e30349efd20 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -124,6 +124,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { @@ -146,6 +149,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4d: ldo4 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c32bcded2aef..212d63d5cbf2 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -885,13 +885,13 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges; clock-names = "ref", "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, + clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; resets = <&ufs_mem_hc 0>; @@ -953,13 +953,13 @@ ufs_card_phy: phy@1da7000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01da7000 0 0xe10>; + reg = <0 0x01da7000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges; clock-names = "ref", "ref_aux"; - clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; resets = <&ufs_card_hc 0>; @@ -1181,26 +1181,16 @@ usb_0_ssphy: usb3-phy@88eb400 { reg = <0 0x088eb400 0 0x100>, <0 0x088eb600 0 0x3ec>, - <0 0x088ec400 0 0x1f0>, + <0 0x088ec400 0 0x364>, <0 0x088eba00 0 0x100>, <0 0x088ebc00 0 0x3ec>, - <0 0x088ec700 0 0x64>; + <0 0x088ec200 0 0x18>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb0_phy_pipe_clk_src"; }; - - usb_0_dpphy: dp-phy@88ed200 { - reg = <0 0x088ed200 0 0x200>, - <0 0x088ed400 0 0x200>, - <0 0x088eda00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; usb_1_hsphy: phy@8902000 { @@ -1242,8 +1232,8 @@ usb_1_ssphy: usb3-phy@8903400 { reg = <0 0x08903400 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904400 0 0x1f0>, + <0 0x08903600 0 0x3ec>, + <0 0x08904400 0 0x364>, <0 0x08903a00 0 0x100>, <0 0x08903c00 0 0x3ec>, <0 0x08904200 0 0x18>; @@ -1253,16 +1243,6 @@ clock-names = "pipe0"; clock-output-names = "usb1_phy_pipe_clk_src"; }; - - usb_1_dpphy: dp-phy@8904200 { - reg = <0 0x08904200 0 0x200>, - <0 0x08904400 0 0x200>, - <0 0x08904a00 0 0x200>, - <0 0x08904600 0 0x200>, - <0 0x08904800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; system-cache-controller@9200000 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 014fe3a31548..fb6e5a140c9f 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -348,6 +348,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { @@ -367,6 +370,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 549e0a2aa9fe..5428aab3058d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -317,6 +317,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_2p85: ldo7 { @@ -339,6 +342,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index a5b62cadb129..e276eed1f8e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -334,6 +334,7 @@ exit-latency-us = <6562>; min-residency-us = <9987>; local-timer-stop; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 0fcf5bd88fc7..69ae6503c2f6 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -107,6 +107,9 @@ regulator-max-microvolt = <888000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { @@ -115,6 +118,9 @@ regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p96: ldo7 { @@ -123,6 +129,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { @@ -131,6 +140,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; |