summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig56
-rw-r--r--arch/arm/Makefile10
-rw-r--r--arch/arm/boot/Makefile6
-rw-r--r--arch/arm/boot/compressed/mmcif-sh7372.c2
-rw-r--r--arch/arm/boot/compressed/sdhi-sh7372.c2
-rw-r--r--arch/arm/boot/dts/prima2-cb.dts416
-rw-r--r--arch/arm/boot/dts/skeleton.dtsi13
-rw-r--r--arch/arm/boot/dts/tegra-harmony.dts70
-rw-r--r--arch/arm/boot/dts/tegra-seaboard.dts28
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi139
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts192
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts48
-rw-r--r--arch/arm/boot/dts/zynq-ep107.dts52
-rw-r--r--arch/arm/common/gic.c6
-rw-r--r--arch/arm/common/it8152.c2
-rw-r--r--arch/arm/configs/mxs_defconfig2
-rw-r--r--arch/arm/configs/u8500_defconfig32
-rw-r--r--arch/arm/include/asm/atomic.h10
-rw-r--r--arch/arm/include/asm/bitops.h5
-rw-r--r--arch/arm/include/asm/clkdev.h5
-rw-r--r--arch/arm/include/asm/hardware/cache-l2x0.h11
-rw-r--r--arch/arm/include/asm/hardware/gic.h6
-rw-r--r--arch/arm/include/asm/hardware/it8152.h2
-rw-r--r--arch/arm/include/asm/irq.h1
-rw-r--r--arch/arm/include/asm/mach/arch.h7
-rw-r--r--arch/arm/include/asm/mach/pci.h4
-rw-r--r--arch/arm/include/asm/pci.h12
-rw-r--r--arch/arm/include/asm/pmu.h10
-rw-r--r--arch/arm/include/asm/prom.h5
-rw-r--r--arch/arm/include/asm/vga.h5
-rw-r--r--arch/arm/kernel/armksyms.c3
-rw-r--r--arch/arm/kernel/bios32.c2
-rw-r--r--arch/arm/kernel/calls.S2
-rw-r--r--arch/arm/kernel/devtree.c14
-rw-r--r--arch/arm/kernel/irq.c19
-rw-r--r--arch/arm/kernel/iwmmxt.S6
-rw-r--r--arch/arm/kernel/module.c4
-rw-r--r--arch/arm/kernel/pmu.c26
-rw-r--r--arch/arm/kernel/process.c4
-rw-r--r--arch/arm/kernel/relocate_kernel.S3
-rw-r--r--arch/arm/kernel/setup.c15
-rw-r--r--arch/arm/kernel/smp.c2
-rw-r--r--arch/arm/kernel/smp_twd.c4
-rw-r--r--arch/arm/kernel/traps.c2
-rw-r--r--arch/arm/lib/Makefile2
-rw-r--r--arch/arm/lib/ecard.S1
-rw-r--r--arch/arm/lib/io-readsw-armv3.S1
-rw-r--r--arch/arm/lib/io-writesw-armv3.S1
-rw-r--r--arch/arm/lib/sha1.S211
-rw-r--r--arch/arm/mach-at91/Makefile2
-rw-r--r--arch/arm/mach-at91/at91cap9.c45
-rw-r--r--arch/arm/mach-at91/at91rm9200.c47
-rw-r--r--arch/arm/mach-at91/at91sam9260.c100
-rw-r--r--arch/arm/mach-at91/at91sam9261.c64
-rw-r--r--arch/arm/mach-at91/at91sam9263.c51
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c45
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c59
-rw-r--r--arch/arm/mach-at91/board-1arm.c11
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c12
-rw-r--r--arch/arm/mach-at91/board-cam60.c12
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c12
-rw-r--r--arch/arm/mach-at91/board-carmeva.c11
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c11
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c11
-rw-r--r--arch/arm/mach-at91/board-csb337.c11
-rw-r--r--arch/arm/mach-at91/board-csb637.c11
-rw-r--r--arch/arm/mach-at91/board-eb9200.c11
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c11
-rw-r--r--arch/arm/mach-at91/board-eco920.c11
-rw-r--r--arch/arm/mach-at91/board-flexibity.c11
-rw-r--r--arch/arm/mach-at91/board-foxg20.c12
-rw-r--r--arch/arm/mach-at91/board-gsia18s.c9
-rw-r--r--arch/arm/mach-at91/board-kafa.c11
-rw-r--r--arch/arm/mach-at91/board-kb9202.c11
-rw-r--r--arch/arm/mach-at91/board-neocore926.c12
-rw-r--r--arch/arm/mach-at91/board-pcontrol-g20.c11
-rw-r--r--arch/arm/mach-at91/board-picotux200.c11
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c12
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c11
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c11
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c12
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c12
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c12
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c12
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c12
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c12
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c11
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c16
-rw-r--r--arch/arm/mach-at91/board-usb-a9260.c12
-rw-r--r--arch/arm/mach-at91/board-usb-a9263.c12
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c12
-rw-r--r--arch/arm/mach-at91/generic.h34
-rw-r--r--arch/arm/mach-at91/include/mach/at91_dbgu.h27
-rw-r--r--arch/arm/mach-at91/include/mach/at91_wdt.h37
-rw-r--r--arch/arm/mach-at91/include/mach/at91cap9.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91rm9200.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9263.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h1
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl.h1
-rw-r--r--arch/arm/mach-at91/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h159
-rw-r--r--arch/arm/mach-at91/include/mach/debug-macro.S14
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-at91/include/mach/io.h11
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-at91/setup.c297
-rw-r--r--arch/arm/mach-at91/soc.h59
-rw-r--r--arch/arm/mach-bcmring/dma.c2
-rw-r--r--arch/arm/mach-bcmring/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-bcmring/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-cns3xxx/cns3420vb.c3
-rw-r--r--arch/arm/mach-cns3xxx/core.c43
-rw-r--r--arch/arm/mach-cns3xxx/core.h6
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/entry-macro.S1
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/hardware.h22
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/pm.h2
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/system.h1
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/uncompress.h1
-rw-r--r--arch/arm/mach-cns3xxx/pcie.c7
-rw-r--r--arch/arm/mach-cns3xxx/pm.c2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c35
-rw-r--r--arch/arm/mach-davinci/clock.c8
-rw-r--r--arch/arm/mach-davinci/clock.h1
-rw-r--r--arch/arm/mach-davinci/da850.c10
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c126
-rw-r--r--arch/arm/mach-davinci/include/mach/clkdev.h15
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h2
-rw-r--r--arch/arm/mach-davinci/include/mach/psc.h5
-rw-r--r--arch/arm/mach-davinci/psc.c14
-rw-r--r--arch/arm/mach-davinci/sleep.S6
-rw-r--r--arch/arm/mach-dove/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-dove/pcie.c5
-rw-r--r--arch/arm/mach-ep93xx/include/mach/clkdev.h11
-rw-r--r--arch/arm/mach-ep93xx/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ts72xx.h26
-rw-r--r--arch/arm/mach-exynos4/Kconfig30
-rw-r--r--arch/arm/mach-exynos4/Makefile11
-rw-r--r--arch/arm/mach-exynos4/clock.c63
-rw-r--r--arch/arm/mach-exynos4/cpu.c50
-rw-r--r--arch/arm/mach-exynos4/dev-audio.c2
-rw-r--r--arch/arm/mach-exynos4/dev-dwmci.c82
-rw-r--r--arch/arm/mach-exynos4/hotplug.c13
-rw-r--r--arch/arm/mach-exynos4/include/mach/dwmci.h20
-rw-r--r--arch/arm/mach-exynos4/include/mach/entry-macro.S11
-rw-r--r--arch/arm/mach-exynos4/include/mach/irqs.h195
-rw-r--r--arch/arm/mach-exynos4/include/mach/map.h19
-rw-r--r--arch/arm/mach-exynos4/include/mach/pm-core.h10
-rw-r--r--arch/arm/mach-exynos4/include/mach/pmu.h25
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-audss.h18
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-clock.h12
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-pmu.h3
-rw-r--r--arch/arm/mach-exynos4/irq-eint.c7
-rw-r--r--arch/arm/mach-exynos4/localtimer.c26
-rw-r--r--arch/arm/mach-exynos4/mach-nuri.c753
-rw-r--r--arch/arm/mach-exynos4/mach-smdkc210.c70
-rw-r--r--arch/arm/mach-exynos4/mach-smdkv310.c3
-rw-r--r--arch/arm/mach-exynos4/mach-universal_c210.c125
-rw-r--r--arch/arm/mach-exynos4/mct.c2
-rw-r--r--arch/arm/mach-exynos4/platsmp.c57
-rw-r--r--arch/arm/mach-exynos4/pm.c273
-rw-r--r--arch/arm/mach-exynos4/pmu.c175
-rw-r--r--arch/arm/mach-exynos4/setup-fimd0.c43
-rw-r--r--arch/arm/mach-exynos4/setup-usb-phy.c2
-rw-r--r--arch/arm/mach-exynos4/time.c301
-rw-r--r--arch/arm/mach-footbridge/Kconfig1
-rw-r--r--arch/arm/mach-footbridge/cats-pci.c2
-rw-r--r--arch/arm/mach-footbridge/dc21285.c4
-rw-r--r--arch/arm/mach-footbridge/ebsa285-pci.c2
-rw-r--r--arch/arm/mach-footbridge/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-footbridge/netwinder-pci.c2
-rw-r--r--arch/arm/mach-footbridge/personal-pci.c3
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/clock-imx1.c6
-rw-r--r--arch/arm/mach-imx/clock-imx21.c8
-rw-r--r--arch/arm/mach-imx/clock-imx25.c23
-rw-r--r--arch/arm/mach-imx/clock-imx27.c15
-rw-r--r--arch/arm/mach-imx/clock-imx31.c13
-rw-r--r--arch/arm/mach-imx/clock-imx35.c18
-rw-r--r--arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c3
-rw-r--r--arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c3
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c2
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c2
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c2
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c13
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c93
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c4
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c2
-rw-r--r--arch/arm/mach-imx/mm-imx21.c3
-rw-r--r--arch/arm/mach-imx/mm-imx25.c25
-rw-r--r--arch/arm/mach-imx/mm-imx27.c3
-rw-r--r--arch/arm/mach-imx/mm-imx31.c26
-rw-r--r--arch/arm/mach-imx/mm-imx35.c46
-rw-r--r--arch/arm/mach-integrator/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c6
-rw-r--r--arch/arm/mach-integrator/pci.c2
-rw-r--r--arch/arm/mach-integrator/pci_v3.c5
-rw-r--r--arch/arm/mach-iop13xx/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-iop13xx/iq81340mc.c2
-rw-r--r--arch/arm/mach-iop13xx/pci.c7
-rw-r--r--arch/arm/mach-iop32x/em7210.c2
-rw-r--r--arch/arm/mach-iop32x/glantank.c2
-rw-r--r--arch/arm/mach-iop32x/include/mach/hardware.h3
-rw-r--r--arch/arm/mach-iop32x/iq31244.c4
-rw-r--r--arch/arm/mach-iop32x/iq80321.c2
-rw-r--r--arch/arm/mach-iop32x/n2100.c2
-rw-r--r--arch/arm/mach-iop33x/include/mach/hardware.h3
-rw-r--r--arch/arm/mach-iop33x/iq80331.c2
-rw-r--r--arch/arm/mach-iop33x/iq80332.c2
-rw-r--r--arch/arm/mach-ixp2000/enp2611.c3
-rw-r--r--arch/arm/mach-ixp2000/include/mach/hardware.h8
-rw-r--r--arch/arm/mach-ixp2000/ixdp2400.c3
-rw-r--r--arch/arm/mach-ixp2000/ixdp2800.c3
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x01.c3
-rw-r--r--arch/arm/mach-ixp2000/pci.c5
-rw-r--r--arch/arm/mach-ixp23xx/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c2
-rw-r--r--arch/arm/mach-ixp23xx/pci.c5
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c3
-rw-r--r--arch/arm/mach-ixp4xx/avila-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c5
-rw-r--r--arch/arm/mach-ixp4xx/coyote-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/fsg-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-pci.c3
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c2
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/ixdpg425-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-pci.c2
-rw-r--r--arch/arm/mach-kirkwood/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-kirkwood/pcie.c6
-rw-r--r--arch/arm/mach-ks8695/board-dsm320.c2
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c2
-rw-r--r--arch/arm/mach-ks8695/include/mach/devices.h2
-rw-r--r--arch/arm/mach-ks8695/include/mach/hardware.h9
-rw-r--r--arch/arm/mach-ks8695/pci.c3
-rw-r--r--arch/arm/mach-lpc32xx/clock.c2
-rw-r--r--arch/arm/mach-lpc32xx/common.c42
-rw-r--r--arch/arm/mach-lpc32xx/common.h2
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/clkdev.h25
-rw-r--r--arch/arm/mach-mmp/Kconfig7
-rw-r--r--arch/arm/mach-mmp/Makefile1
-rw-r--r--arch/arm/mach-mmp/clock.c15
-rw-r--r--arch/arm/mach-mmp/clock.h1
-rw-r--r--arch/arm/mach-mmp/gplugd.c197
-rw-r--r--arch/arm/mach-mmp/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa168.h56
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa168.h8
-rw-r--r--arch/arm/mach-mmp/include/mach/regs-apmu.h1
-rw-r--r--arch/arm/mach-mmp/pxa168.c6
-rw-r--r--arch/arm/mach-mmp/time.c62
-rw-r--r--arch/arm/mach-mmp/ttc_dkb.c31
-rw-r--r--arch/arm/mach-msm/Kconfig4
-rw-r--r--arch/arm/mach-msm/Makefile8
-rw-r--r--arch/arm/mach-msm/gpio-v2.c433
-rw-r--r--arch/arm/mach-msm/gpio.c376
-rw-r--r--arch/arm/mach-msm/gpio_hw.h278
-rw-r--r--arch/arm/mach-msm/gpiomux.h17
-rw-r--r--arch/arm/mach-msm/include/mach/msm_gpiomux.h (renamed from arch/arm/mach-msm/include/mach/clkdev.h)29
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x00.h10
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x30.h10
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-8x50.h10
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap.h2
-rw-r--r--arch/arm/mach-msm/io.c12
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c6
-rw-r--r--arch/arm/mach-mx5/Kconfig14
-rw-r--r--arch/arm/mach-mx5/Makefile2
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c26
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c6
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikasb.c15
-rw-r--r--arch/arm/mach-mx5/board-mx53_ard.c254
-rw-r--r--arch/arm/mach-mx5/board-mx53_evk.c17
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c39
-rw-r--r--arch/arm/mach-mx5/clock-mx51-mx53.c64
-rw-r--r--arch/arm/mach-mx5/crm_regs.h2
-rw-r--r--arch/arm/mach-mx5/devices-imx53.h8
-rw-r--r--arch/arm/mach-mx5/mm.c44
-rw-r--r--arch/arm/mach-mx5/mx51_efika.c6
-rw-r--r--arch/arm/mach-mx5/pm-imx5.c73
-rw-r--r--arch/arm/mach-mxs/Kconfig2
-rw-r--r--arch/arm/mach-mxs/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c21
-rw-r--r--arch/arm/mach-mxs/mach-tx28.c6
-rw-r--r--arch/arm/mach-nomadik/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-nuc93x/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-omap1/include/mach/clkdev.h5
-rw-r--r--arch/arm/mach-omap1/pm.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig7
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c203
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c95
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c101
-rw-r--r--arch/arm/mach-omap2/board-overo.c1
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c147
-rw-r--r--arch/arm/mach-omap2/board-zoom-debugboard.c9
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c10
-rw-r--r--arch/arm/mach-omap2/clock.c28
-rw-r--r--arch/arm/mach-omap2/clock.h3
-rw-r--r--arch/arm/mach-omap2/clock2420_data.c22
-rw-r--r--arch/arm/mach-omap2/clock2430_data.c32
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c46
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c271
-rw-r--r--arch/arm/mach-omap2/clockdomain.c212
-rw-r--r--arch/arm/mach-omap2/clockdomain.h11
-rw-r--r--arch/arm/mach-omap2/clockdomain2xxx_3xxx.c6
-rw-r--r--arch/arm/mach-omap2/clockdomain44xx.c13
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/cm-regbits-44xx.h36
-rw-r--r--arch/arm/mach-omap2/cm44xx.h8
-rw-r--r--arch/arm/mach-omap2/cminst44xx.c150
-rw-r--r--arch/arm/mach-omap2/cminst44xx.h33
-rw-r--r--arch/arm/mach-omap2/devices.c3
-rw-r--r--arch/arm/mach-omap2/display.c26
-rw-r--r--arch/arm/mach-omap2/hsmmc.c7
-rw-r--r--arch/arm/mach-omap2/i2c.c68
-rw-r--r--arch/arm/mach-omap2/id.c53
-rw-r--r--arch/arm/mach-omap2/include/mach/clkdev.h5
-rw-r--r--arch/arm/mach-omap2/iommu2.c4
-rw-r--r--arch/arm/mach-omap2/mux.c14
-rw-r--r--arch/arm/mach-omap2/omap-iommu.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c261
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c9
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c18
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c491
-rw-r--r--arch/arm/mach-omap2/pm.c8
-rw-r--r--arch/arm/mach-omap2/powerdomain.c25
-rw-r--r--arch/arm/mach-omap2/powerdomains44xx_data.c9
-rw-r--r--arch/arm/mach-omap2/prcm.c2
-rw-r--r--arch/arm/mach-omap2/prm-regbits-44xx.h8
-rw-r--r--arch/arm/mach-omap2/prm44xx.c145
-rw-r--r--arch/arm/mach-omap2/prm44xx.h10
-rw-r--r--arch/arm/mach-omap2/prminst44xx.c112
-rw-r--r--arch/arm/mach-omap2/prminst44xx.h12
-rw-r--r--arch/arm/mach-omap2/smartreflex.c3
-rw-r--r--arch/arm/mach-omap2/timer.c3
-rw-r--r--arch/arm/mach-omap2/twl-common.c84
-rw-r--r--arch/arm/mach-orion5x/common.h2
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c3
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c2
-rw-r--r--arch/arm/mach-orion5x/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c3
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c2
-rw-r--r--arch/arm/mach-orion5x/pci.c5
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c2
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c2
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c3
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c3
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c3
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c3
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c3
-rw-r--r--arch/arm/mach-pnx4008/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-prima2/Makefile7
-rw-r--r--arch/arm/mach-prima2/Makefile.boot3
-rw-r--r--arch/arm/mach-prima2/clock.c510
-rw-r--r--arch/arm/mach-prima2/common.h26
-rw-r--r--arch/arm/mach-prima2/include/mach/clkdev.h15
-rw-r--r--arch/arm/mach-prima2/include/mach/debug-macro.S29
-rw-r--r--arch/arm/mach-prima2/include/mach/entry-macro.S29
-rw-r--r--arch/arm/mach-prima2/include/mach/hardware.h15
-rw-r--r--arch/arm/mach-prima2/include/mach/io.h16
-rw-r--r--arch/arm/mach-prima2/include/mach/irqs.h17
-rw-r--r--arch/arm/mach-prima2/include/mach/map.h16
-rw-r--r--arch/arm/mach-prima2/include/mach/memory.h21
-rw-r--r--arch/arm/mach-prima2/include/mach/system.h29
-rw-r--r--arch/arm/mach-prima2/include/mach/timex.h14
-rw-r--r--arch/arm/mach-prima2/include/mach/uart.h23
-rw-r--r--arch/arm/mach-prima2/include/mach/uncompress.h40
-rw-r--r--arch/arm/mach-prima2/include/mach/vmalloc.h16
-rw-r--r--arch/arm/mach-prima2/irq.c72
-rw-r--r--arch/arm/mach-prima2/l2x0.c59
-rw-r--r--arch/arm/mach-prima2/lluart.c25
-rw-r--r--arch/arm/mach-prima2/prima2.c41
-rw-r--r--arch/arm/mach-prima2/rstc.c70
-rw-r--r--arch/arm/mach-prima2/timer.c218
-rw-r--r--arch/arm/mach-pxa/balloon3.c1
-rw-r--r--arch/arm/mach-pxa/capc7117.c1
-rw-r--r--arch/arm/mach-pxa/clock.c15
-rw-r--r--arch/arm/mach-pxa/clock.h1
-rw-r--r--arch/arm/mach-pxa/cm-x2xx-pci.c5
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c5
-rw-r--r--arch/arm/mach-pxa/cm-x300.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa320.c4
-rw-r--r--arch/arm/mach-pxa/corgi.c3
-rw-r--r--arch/arm/mach-pxa/csb726.c4
-rw-r--r--arch/arm/mach-pxa/em-x270.c2
-rw-r--r--arch/arm/mach-pxa/eseries.c6
-rw-r--r--arch/arm/mach-pxa/ezx.c6
-rw-r--r--arch/arm/mach-pxa/generic.h13
-rw-r--r--arch/arm/mach-pxa/gumstix.c1
-rw-r--r--arch/arm/mach-pxa/h5000.c2
-rw-r--r--arch/arm/mach-pxa/himalaya.c4
-rw-r--r--arch/arm/mach-pxa/hx4700.c1
-rw-r--r--arch/arm/mach-pxa/icontrol.c1
-rw-r--r--arch/arm/mach-pxa/idp.c1
-rw-r--r--arch/arm/mach-pxa/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h12
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa25x.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa27x.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa300.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa320.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx.h14
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa930.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-intc.h30
-rw-r--r--arch/arm/mach-pxa/irq.c36
-rw-r--r--arch/arm/mach-pxa/littleton.c1
-rw-r--r--arch/arm/mach-pxa/lpd270.c1
-rw-r--r--arch/arm/mach-pxa/lubbock.c1
-rw-r--r--arch/arm/mach-pxa/magician.c1
-rw-r--r--arch/arm/mach-pxa/mainstone.c1
-rw-r--r--arch/arm/mach-pxa/mioa701.c1
-rw-r--r--arch/arm/mach-pxa/mp900.c1
-rw-r--r--arch/arm/mach-pxa/palmld.c1
-rw-r--r--arch/arm/mach-pxa/palmt5.c1
-rw-r--r--arch/arm/mach-pxa/palmtc.c4
-rw-r--r--arch/arm/mach-pxa/palmte2.c3
-rw-r--r--arch/arm/mach-pxa/palmtreo.c2
-rw-r--r--arch/arm/mach-pxa/palmtx.c1
-rw-r--r--arch/arm/mach-pxa/palmz72.c1
-rw-r--r--arch/arm/mach-pxa/pcm027.c1
-rw-r--r--arch/arm/mach-pxa/poodle.c1
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c5
-rw-r--r--arch/arm/mach-pxa/pxa95x.c1
-rw-r--r--arch/arm/mach-pxa/raumfeld.c8
-rw-r--r--arch/arm/mach-pxa/saar.c1
-rw-r--r--arch/arm/mach-pxa/saarb.c1
-rw-r--r--arch/arm/mach-pxa/spitz.c3
-rw-r--r--arch/arm/mach-pxa/stargate2.c2
-rw-r--r--arch/arm/mach-pxa/tavorevb.c1
-rw-r--r--arch/arm/mach-pxa/tavorevb3.c1
-rw-r--r--arch/arm/mach-pxa/tosa.c1
-rw-r--r--arch/arm/mach-pxa/trizeps4.c2
-rw-r--r--arch/arm/mach-pxa/viper.c1
-rw-r--r--arch/arm/mach-pxa/vpac270.c1
-rw-r--r--arch/arm/mach-pxa/xcep.c4
-rw-r--r--arch/arm/mach-pxa/z2.c18
-rw-r--r--arch/arm/mach-pxa/zeus.c4
-rw-r--r--arch/arm/mach-pxa/zylonite.c3
-rw-r--r--arch/arm/mach-realview/include/mach/system.h1
-rw-r--r--arch/arm/mach-s3c2410/include/mach/pm-core.h3
-rw-r--r--arch/arm/mach-s3c2440/clock.c2
-rw-r--r--arch/arm/mach-s3c2440/s3c2442.c2
-rw-r--r--arch/arm/mach-s3c2440/s3c244x-clock.c2
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig23
-rw-r--r--arch/arm/mach-s3c64xx/Makefile1
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/irqs.h5
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/pm-core.h19
-rw-r--r--arch/arm/mach-s3c64xx/irq.c12
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c774
-rw-r--r--arch/arm/mach-s3c64xx/pm.c1
-rw-r--r--arch/arm/mach-s5p64x0/Makefile2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-gpio.h10
-rw-r--r--arch/arm/mach-s5p64x0/irq-eint.c152
-rw-r--r--arch/arm/mach-s5pv210/Kconfig1
-rw-r--r--arch/arm/mach-s5pv210/clock.c7
-rw-r--r--arch/arm/mach-s5pv210/cpu.c2
-rw-r--r--arch/arm/mach-s5pv210/dev-audio.c2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h3
-rw-r--r--arch/arm/mach-s5pv210/include/mach/pm-core.h3
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-audss.h18
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c10
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c1
-rw-r--r--arch/arm/mach-s5pv210/pm.c2
-rw-r--r--arch/arm/mach-sa1100/include/mach/hardware.h8
-rw-r--r--arch/arm/mach-sa1100/pci-nanoengine.c7
-rw-r--r--arch/arm/mach-shark/include/mach/hardware.h6
-rw-r--r--arch/arm/mach-shark/pci.c14
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c3
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c13
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c18
-rw-r--r--arch/arm/mach-shmobile/clock-sh7367.c3
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c35
-rw-r--r--arch/arm/mach-shmobile/clock-sh7377.c3
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c6
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh7372.h4
-rw-r--r--arch/arm/mach-shmobile/intc-sh7372.c7
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c176
-rw-r--r--arch/arm/mach-spear3xx/include/mach/clkdev.h19
-rw-r--r--arch/arm/mach-spear6xx/include/mach/clkdev.h19
-rw-r--r--arch/arm/mach-tegra/Kconfig12
-rw-r--r--arch/arm/mach-tegra/Makefile3
-rw-r--r--arch/arm/mach-tegra/Makefile.boot3
-rw-r--r--arch/arm/mach-tegra/board-dt.c119
-rw-r--r--arch/arm/mach-tegra/board-harmony.c22
-rw-r--r--arch/arm/mach-tegra/board-paz00-pinmux.c10
-rw-r--r--arch/arm/mach-tegra/board-paz00.c31
-rw-r--r--arch/arm/mach-tegra/board-paz00.h10
-rw-r--r--arch/arm/mach-tegra/board-seaboard.c26
-rw-r--r--arch/arm/mach-tegra/board-trimslice-pinmux.c7
-rw-r--r--arch/arm/mach-tegra/board-trimslice.c56
-rw-r--r--arch/arm/mach-tegra/board-trimslice.h3
-rw-r--r--arch/arm/mach-tegra/devices.c53
-rw-r--r--arch/arm/mach-tegra/include/mach/barriers.h30
-rw-r--r--arch/arm/mach-tegra/include/mach/system.h1
-rw-r--r--arch/arm/mach-tegra/io.c1
-rw-r--r--arch/arm/mach-tegra/pcie.c4
-rw-r--r--arch/arm/mach-tegra/platsmp.c3
-rw-r--r--arch/arm/mach-tegra/tegra2_clocks.c4
-rw-r--r--arch/arm/mach-u300/spi.c4
-rw-r--r--arch/arm/mach-u300/timer.c33
-rw-r--r--arch/arm/mach-ux500/Kconfig15
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c43
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c9
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c61
-rw-r--r--arch/arm/mach-ux500/board-mop500-uib.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c154
-rw-r--r--arch/arm/mach-ux500/board-mop500.h5
-rw-r--r--arch/arm/mach-ux500/clock.c48
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c1
-rw-r--r--arch/arm/mach-ux500/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-ux500/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-ux500/usb.c1
-rw-r--r--arch/arm/mach-versatile/Kconfig8
-rw-r--r--arch/arm/mach-versatile/Makefile1
-rw-r--r--arch/arm/mach-versatile/core.c62
-rw-r--r--arch/arm/mach-versatile/core.h4
-rw-r--r--arch/arm/mach-versatile/include/mach/hardware.h6
-rw-r--r--arch/arm/mach-versatile/pci.c5
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c51
-rw-r--r--arch/arm/mach-vexpress/v2m.c7
-rw-r--r--arch/arm/mach-w90x900/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-zynq/Makefile6
-rw-r--r--arch/arm/mach-zynq/Makefile.boot3
-rw-r--r--arch/arm/mach-zynq/common.c118
-rw-r--r--arch/arm/mach-zynq/common.h (renamed from arch/arm/mach-tegra/include/mach/hardware.h)20
-rw-r--r--arch/arm/mach-zynq/include/mach/clkdev.h32
-rw-r--r--arch/arm/mach-zynq/include/mach/debug-macro.S36
-rw-r--r--arch/arm/mach-zynq/include/mach/entry-macro.S30
-rw-r--r--arch/arm/mach-zynq/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-zynq/include/mach/io.h33
-rw-r--r--arch/arm/mach-zynq/include/mach/irqs.h21
-rw-r--r--arch/arm/mach-zynq/include/mach/memory.h22
-rw-r--r--arch/arm/mach-zynq/include/mach/system.h (renamed from arch/arm/mach-tegra/include/mach/clkdev.h)22
-rw-r--r--arch/arm/mach-zynq/include/mach/timex.h23
-rw-r--r--arch/arm/mach-zynq/include/mach/uart.h25
-rw-r--r--arch/arm/mach-zynq/include/mach/uncompress.h51
-rw-r--r--arch/arm/mach-zynq/include/mach/vmalloc.h20
-rw-r--r--arch/arm/mach-zynq/include/mach/zynq_soc.h48
-rw-r--r--arch/arm/mach-zynq/timer.c298
-rw-r--r--arch/arm/mm/Kconfig3
-rw-r--r--arch/arm/mm/abort-macro.S2
-rw-r--r--arch/arm/mm/alignment.c56
-rw-r--r--arch/arm/mm/cache-l2x0.c21
-rw-r--r--arch/arm/mm/init.c4
-rw-r--r--arch/arm/mm/iomap.c12
-rw-r--r--arch/arm/mm/proc-arm920.S2
-rw-r--r--arch/arm/mm/proc-arm926.S2
-rw-r--r--arch/arm/mm/proc-arm946.S3
-rw-r--r--arch/arm/mm/proc-sa1100.S10
-rw-r--r--arch/arm/mm/proc-v6.S16
-rw-r--r--arch/arm/mm/proc-v7.S6
-rw-r--r--arch/arm/mm/proc-xsc3.S7
-rw-r--r--arch/arm/plat-iop/pci.c3
-rw-r--r--arch/arm/plat-mxc/devices.c16
-rw-r--r--arch/arm/plat-mxc/devices/platform-fec.c21
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-dma.c204
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-i2c.c3
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-keypad.c5
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-ssi.c10
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-uart.c9
-rw-r--r--arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c29
-rw-r--r--arch/arm/plat-mxc/include/mach/clkdev.h7
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S8
-rw-r--r--arch/arm/plat-mxc/include/mach/devices-common.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/dma.h3
-rw-r--r--arch/arm/plat-mxc/include/mach/esdhc.h25
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx53.h31
-rw-r--r--arch/arm/plat-mxc/include/mach/mx53.h28
-rw-r--r--arch/arm/plat-mxc/include/mach/sdma.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/uncompress.h1
-rw-r--r--arch/arm/plat-mxc/irq-common.c13
-rw-r--r--arch/arm/plat-mxc/tzic.c97
-rw-r--r--arch/arm/plat-omap/Kconfig1
-rw-r--r--arch/arm/plat-omap/clock.c39
-rw-r--r--arch/arm/plat-omap/dmtimer.c4
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev.h13
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev_omap.h1
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h2
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h35
-rw-r--r--arch/arm/plat-omap/include/plat/dma.h5
-rw-r--r--arch/arm/plat-omap/include/plat/i2c.h6
-rw-r--r--arch/arm/plat-omap/include/plat/irqs.h13
-rw-r--r--arch/arm/plat-omap/include/plat/omap4-keypad.h3
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h15
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h3
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h1
-rw-r--r--arch/arm/plat-omap/iovmm.c9
-rw-r--r--arch/arm/plat-omap/mcbsp.c27
-rw-r--r--arch/arm/plat-omap/omap_device.c91
-rw-r--r--arch/arm/plat-s5p/Kconfig11
-rw-r--r--arch/arm/plat-s5p/Makefile3
-rw-r--r--arch/arm/plat-s5p/clock.c2
-rw-r--r--arch/arm/plat-s5p/dev-fimd0.c67
-rw-r--r--arch/arm/plat-s5p/dev-mfc.c123
-rw-r--r--arch/arm/plat-s5p/include/plat/map-s5p.h5
-rw-r--r--arch/arm/plat-s5p/include/plat/mfc.h27
-rw-r--r--arch/arm/plat-s5p/irq-gpioint.c6
-rw-r--r--arch/arm/plat-samsung/adc.c84
-rw-r--r--arch/arm/plat-samsung/dev-asocdma.c10
-rw-r--r--arch/arm/plat-samsung/include/plat/audio.h1
-rw-r--r--arch/arm/plat-samsung/include/plat/backlight.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/fb-core.h15
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h15
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-adc.h1
-rw-r--r--arch/arm/plat-samsung/irq-uart.c7
-rw-r--r--arch/arm/plat-samsung/irq-vic-timer.c5
-rw-r--r--arch/arm/plat-samsung/pm.c2
-rw-r--r--arch/arm/plat-spear/include/plat/clkdev.h20
-rw-r--r--arch/arm/plat-tcc/include/mach/clkdev.h7
-rw-r--r--arch/arm/tools/mach-types8
627 files changed, 12764 insertions, 4787 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9cb1f4bd7618..3269576dbfa8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -195,8 +195,7 @@ config VECTORS_BASE
The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT
- bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Patch physical to virtual translations at runtime"
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
@@ -242,6 +241,7 @@ config ARCH_INTEGRATOR
select ARM_AMBA
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
@@ -253,6 +253,7 @@ config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -268,6 +269,7 @@ config ARCH_VERSATILE
select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -284,6 +286,7 @@ config ARCH_VEXPRESS
select ARM_AMBA
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_PATA_PLATFORM
@@ -324,7 +327,7 @@ config ARCH_CLPS711X
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
- select CPU_V6
+ select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
select MIGHT_HAVE_PCI
@@ -340,6 +343,19 @@ config ARCH_GEMINI
help
Support for the Cortina Systems Gemini family SoCs
+config ARCH_PRIMA2
+ bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
+ select CPU_V7
+ select GENERIC_TIME
+ select NO_IOPORT
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select GENERIC_IRQ_CHIP
+ select USE_OF
+ select ZONE_DMA
+ help
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
+
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
@@ -379,6 +395,7 @@ config ARCH_MXC
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
@@ -586,7 +603,6 @@ config ARCH_TEGRA
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
- select ARCH_HAS_BARRIERS if CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -613,6 +629,8 @@ config ARCH_PXA
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select AUTO_ZRELADDR
+ select MULTI_IRQ_HANDLER
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -633,6 +651,7 @@ config ARCH_SHMOBILE
bool "Renesas SH-Mobile / R-Mobile"
select HAVE_CLK
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select GENERIC_CLOCKEVENTS
select NO_IOPORT
select SPARSE_IRQ
@@ -750,6 +769,7 @@ config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_HOLES_MEMORYMODEL
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
@@ -768,6 +788,7 @@ config ARCH_EXYNOS4
bool "Samsung EXYNOS4"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_HOLES_MEMORYMODEL
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
@@ -812,6 +833,7 @@ config ARCH_U300
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
+ select HAVE_MACH_CLKDEV
select GENERIC_GPIO
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -884,6 +906,19 @@ config ARCH_VT8500
select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
+
+config ARCH_ZYNQ
+ bool "Xilinx Zynq ARM Cortex A9 Platform"
+ select CPU_V7
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select ARM_GIC
+ select ARM_AMBA
+ select ICST
+ select USE_OF
+ help
+ Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
#
@@ -1236,6 +1271,18 @@ config ARM_ERRATA_754327
This workaround defines cpu_relax() as smp_mb(), preventing correctly
written polling loops from denying visibility of updates to memory.
+config ARM_ERRATA_364296
+ bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+ depends on CPU_V6 && !SMP
+ help
+ This options enables the workaround for the 364296 ARM1136
+ r0p2 erratum (possible cache data corruption with
+ hit-under-miss enabled). It sets the undocumented bit 31 in
+ the auxiliary control register and the FI bit in the control
+ register, thus disabling hit-under-miss without putting the
+ processor into full low interrupt latency mode. ARM11MPCore
+ is not affected.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -1680,6 +1727,7 @@ config USE_OF
bool "Flattened Device Tree support"
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
help
Include support for flattened device tree machine descriptions.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 206c34ecb9e3..70c424eaf7b0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,6 +168,7 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
@@ -194,6 +195,7 @@ machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
machine-$(CONFIG_MACH_SPEAR600) := spear6xx
+machine-$(CONFIG_ARCH_ZYNQ) := zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -201,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_TCC_926) := tcc
+plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
@@ -279,6 +282,12 @@ zImage Image xipImage bootpImage uImage: vmlinux
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+%.dtb:
+ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
+dtbs:
+ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
@@ -295,6 +304,7 @@ define archhelp
echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
+ echo ' dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' uinstall - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9128fddf1109..a1edfd5a129a 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -59,6 +59,12 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
endif
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(src)/dts/%.dts
+ $(call cmd,dtc)
+
+$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
+
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
index b6f61d9a5a1b..672ae95db5c3 100644
--- a/arch/arm/boot/compressed/mmcif-sh7372.c
+++ b/arch/arm/boot/compressed/mmcif-sh7372.c
@@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
/* Disable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+ __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
}
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
index d403a8b24d7f..d279294f2381 100644
--- a/arch/arm/boot/compressed/sdhi-sh7372.c
+++ b/arch/arm/boot/compressed/sdhi-sh7372.c
@@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
goto err;
/* Disable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+ __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
new file mode 100644
index 000000000000..6fecc88065b2
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-cb.dts
@@ -0,0 +1,416 @@
+/dts-v1/;
+/ {
+ model = "SiRF Prima2 eVB";
+ compatible = "sirf,prima2-cb", "sirf,prima2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
+ linux,stdout-path = &uart1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ /* from bootloader */
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x40000000 0x40000000 0x80000000>;
+
+ l2-cache-controller@80040000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x80040000 0x1000>;
+ interrupts = <59>;
+ };
+
+ intc: interrupt-controller@80020000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "sirf,prima2-intc";
+ reg = <0x80020000 0x1000>;
+ };
+
+ sys-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x88000000 0x88000000 0x40000>;
+
+ clock-controller@88000000 {
+ compatible = "sirf,prima2-clkc";
+ reg = <0x88000000 0x1000>;
+ interrupts = <3>;
+ };
+
+ reset-controller@88010000 {
+ compatible = "sirf,prima2-rstc";
+ reg = <0x88010000 0x1000>;
+ };
+ };
+
+ mem-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90000000 0x90000000 0x10000>;
+
+ memory-controller@90000000 {
+ compatible = "sirf,prima2-memc";
+ reg = <0x90000000 0x10000>;
+ interrupts = <27>;
+ };
+ };
+
+ disp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90010000 0x90010000 0x30000>;
+
+ display@90010000 {
+ compatible = "sirf,prima2-lcd";
+ reg = <0x90010000 0x20000>;
+ interrupts = <30>;
+ };
+
+ vpp@90020000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x90020000 0x10000>;
+ interrupts = <31>;
+ };
+ };
+
+ graphics-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x98000000 0x98000000 0x8000000>;
+
+ graphics@98000000 {
+ compatible = "powervr,sgx531";
+ reg = <0x98000000 0x8000000>;
+ interrupts = <6>;
+ };
+ };
+
+ multimedia-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+ multimedia@a0000000 {
+ compatible = "sirf,prima2-video-codec";
+ reg = <0xa0000000 0x8000000>;
+ interrupts = <5>;
+ };
+ };
+
+ dsp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+ dspif@a8000000 {
+ compatible = "sirf,prima2-dspif";
+ reg = <0xa8000000 0x10000>;
+ interrupts = <9>;
+ };
+
+ gps@a8010000 {
+ compatible = "sirf,prima2-gps";
+ reg = <0xa8010000 0x10000>;
+ interrupts = <7>;
+ };
+
+ dsp@a9000000 {
+ compatible = "sirf,prima2-dsp";
+ reg = <0xa9000000 0x1000000>;
+ interrupts = <8>;
+ };
+ };
+
+ peri-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0xb0000000 0x180000>;
+
+ timer@b0020000 {
+ compatible = "sirf,prima2-tick";
+ reg = <0xb0020000 0x1000>;
+ interrupts = <0>;
+ };
+
+ nand@b0030000 {
+ compatible = "sirf,prima2-nand";
+ reg = <0xb0030000 0x10000>;
+ interrupts = <41>;
+ };
+
+ audio@b0040000 {
+ compatible = "sirf,prima2-audio";
+ reg = <0xb0040000 0x10000>;
+ interrupts = <35>;
+ };
+
+ uart0: uart@b0050000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0050000 0x10000>;
+ interrupts = <17>;
+ };
+
+ uart1: uart@b0060000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0060000 0x10000>;
+ interrupts = <18>;
+ };
+
+ uart2: uart@b0070000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0070000 0x10000>;
+ interrupts = <19>;
+ };
+
+ usp0: usp@b0080000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0080000 0x10000>;
+ interrupts = <20>;
+ };
+
+ usp1: usp@b0090000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0090000 0x10000>;
+ interrupts = <21>;
+ };
+
+ usp2: usp@b00a0000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb00a0000 0x10000>;
+ interrupts = <22>;
+ };
+
+ dmac0: dma-controller@b00b0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb00b0000 0x10000>;
+ interrupts = <12>;
+ };
+
+ dmac1: dma-controller@b0160000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb0160000 0x10000>;
+ interrupts = <13>;
+ };
+
+ vip@b00C0000 {
+ compatible = "sirf,prima2-vip";
+ reg = <0xb00C0000 0x10000>;
+ };
+
+ spi0: spi@b00d0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb00d0000 0x10000>;
+ interrupts = <15>;
+ };
+
+ spi1: spi@b0170000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb0170000 0x10000>;
+ interrupts = <16>;
+ };
+
+ i2c0: i2c@b00e0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+ };
+
+ i2c1: i2c@b00f0000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00f0000 0x10000>;
+ interrupts = <25>;
+ };
+
+ tsc@b0110000 {
+ compatible = "sirf,prima2-tsc";
+ reg = <0xb0110000 0x10000>;
+ interrupts = <33>;
+ };
+
+ gpio: gpio-controller@b0120000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,prima2-gpio";
+ reg = <0xb0120000 0x10000>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pwm@b0130000 {
+ compatible = "sirf,prima2-pwm";
+ reg = <0xb0130000 0x10000>;
+ };
+
+ efusesys@b0140000 {
+ compatible = "sirf,prima2-efuse";
+ reg = <0xb0140000 0x10000>;
+ };
+
+ pulsec@b0150000 {
+ compatible = "sirf,prima2-pulsec";
+ reg = <0xb0150000 0x10000>;
+ interrupts = <48>;
+ };
+
+ pci-iobg {
+ compatible = "sirf,prima2-pciiobg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x56000000 0x56000000 0x1b00000>;
+
+ sd0: sdhci@56000000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56000000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd1: sdhci@56100000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56100000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd2: sdhci@56200000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56200000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd3: sdhci@56300000 {
+ cell-index = <3>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56300000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd4: sdhci@56400000 {
+ cell-index = <4>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56400000 0x100000>;
+ interrupts = <39>;
+ };
+
+ sd5: sdhci@56500000 {
+ cell-index = <5>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56500000 0x100000>;
+ interrupts = <39>;
+ };
+
+ pci-copy@57900000 {
+ compatible = "sirf,prima2-pcicp";
+ reg = <0x57900000 0x100000>;
+ interrupts = <40>;
+ };
+
+ rom-interface@57a00000 {
+ compatible = "sirf,prima2-romif";
+ reg = <0x57a00000 0x100000>;
+ };
+ };
+ };
+
+ rtc-iobg {
+ compatible = "sirf,prima2-rtciobg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80030000 0x10000>;
+
+ gpsrtc@1000 {
+ compatible = "sirf,prima2-gpsrtc";
+ reg = <0x1000 0x1000>;
+ interrupts = <55 56 57>;
+ };
+
+ sysrtc@2000 {
+ compatible = "sirf,prima2-sysrtc";
+ reg = <0x2000 0x1000>;
+ interrupts = <52 53 54>;
+ };
+
+ pwrc@3000 {
+ compatible = "sirf,prima2-pwrc";
+ reg = <0x3000 0x1000>;
+ interrupts = <32>;
+ };
+ };
+
+ uus-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb8000000 0xb8000000 0x40000>;
+
+ usb0: usb@b00e0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8000000 0x10000>;
+ interrupts = <10>;
+ };
+
+ usb1: usb@b00f0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8010000 0x10000>;
+ interrupts = <11>;
+ };
+
+ sata@b00f0000 {
+ compatible = "synopsys,dwc-ahsata";
+ reg = <0xb8020000 0x10000>;
+ interrupts = <37>;
+ };
+
+ security@b00f0000 {
+ compatible = "sirf,prima2-security";
+ reg = <0xb8030000 0x10000>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi
new file mode 100644
index 000000000000..b41d241de2cd
--- /dev/null
+++ b/arch/arm/boot/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+ memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
new file mode 100644
index 000000000000..4c053340ce33
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Harmony evaluation board";
+ compatible = "nvidia,harmony", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
+ };
+
+ memory@0 {
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+
+ codec: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupts = < 347 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ /* 0x8000 = Not configured */
+ gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+ };
+ };
+
+ i2c@7000c400 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000c500 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ };
+
+ sound {
+ compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+
+ spkr-en-gpios = <&codec 2 0>;
+ hp-det-gpios = <&gpio 178 0>;
+ int-mic-en-gpios = <&gpio 184 0>;
+ ext-mic-en-gpios = <&gpio 185 0>;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000200 {
+ gpios = <&gpio 69 0>, /* cd, gpio PI5 */
+ <&gpio 57 0>, /* wp, gpio PH1 */
+ <&gpio 155 0>; /* power, gpio PT3 */
+ };
+
+ sdhci@c8000600 {
+ gpios = <&gpio 58 0>, /* cd, gpio PH2 */
+ <&gpio 59 0>, /* wp, gpio PH3 */
+ <&gpio 70 0>; /* power, gpio PI6 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
new file mode 100644
index 000000000000..1940cae00748
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -0,0 +1,28 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Seaboard";
+ compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000400 {
+ gpios = <&gpio 69 0>, /* cd, gpio PI5 */
+ <&gpio 57 0>, /* wp, gpio PH1 */
+ <&gpio 70 0>; /* power, gpio PI6 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
new file mode 100644
index 000000000000..5727595cde61
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -0,0 +1,139 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "nvidia,tegra20";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@50041000 {
+ compatible = "nvidia,tegra20-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = < 0x50041000 0x1000 >,
+ < 0x50040100 0x0100 >;
+ };
+
+ i2c@7000c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000C000 0x100>;
+ interrupts = < 70 >;
+ };
+
+ i2c@7000c400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000C400 0x100>;
+ interrupts = < 116 >;
+ };
+
+ i2c@7000c500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000C500 0x100>;
+ interrupts = < 124 >;
+ };
+
+ i2c@7000d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000D000 0x200>;
+ interrupts = < 85 >;
+ };
+
+ i2s@70002800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002800 0x200>;
+ interrupts = < 45 >;
+ dma-channel = < 2 >;
+ };
+
+ i2s@70002a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002a00 0x200>;
+ interrupts = < 35 >;
+ dma-channel = < 1 >;
+ };
+
+ das@70000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-das";
+ reg = <0x70000c00 0x80>;
+ };
+
+ gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 64 65 66 67 87 119 121 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ serial@70006000 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006000 0x40>;
+ reg-shift = <2>;
+ interrupts = < 68 >;
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006040 0x40>;
+ reg-shift = <2>;
+ interrupts = < 69 >;
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006200 0x100>;
+ reg-shift = <2>;
+ interrupts = < 78 >;
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006300 0x100>;
+ reg-shift = <2>;
+ interrupts = < 122 >;
+ };
+
+ serial@70006400 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006400 0x100>;
+ reg-shift = <2>;
+ interrupts = < 123 >;
+ };
+
+ sdhci@c8000000 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000000 0x200>;
+ interrupts = < 46 >;
+ };
+
+ sdhci@c8000200 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000200 0x200>;
+ interrupts = < 47 >;
+ };
+
+ sdhci@c8000400 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000400 0x200>;
+ interrupts = < 51 >;
+ };
+
+ sdhci@c8000600 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000600 0x200>;
+ interrupts = < 63 >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
new file mode 100644
index 000000000000..0b32925f2147
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -0,0 +1,192 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "ARM Versatile AB";
+ compatible = "arm,versatile-ab";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&vic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ i2c0 = &i2c0;
+ };
+
+ memory {
+ reg = <0x0 0x08000000>;
+ };
+
+ flash@34000000 {
+ compatible = "arm,versatile-flash";
+ reg = <0x34000000 0x4000000>;
+ bank-width = <4>;
+ };
+
+ i2c0: i2c@10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ net@10010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x10010000 0x10000>;
+ interrupts = <25>;
+ };
+
+ lcd@10008000 {
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vic: intc@10140000 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140000 0x1000>;
+ };
+
+ sic: intc@10003000 {
+ compatible = "arm,versatile-sic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10003000 0x1000>;
+ interrupt-parent = <&vic>;
+ interrupts = <31>; /* Cascaded to vic */
+ };
+
+ dma@10130000 {
+ compatible = "arm,pl081", "arm,primecell";
+ reg = <0x10130000 0x1000>;
+ interrupts = <17>;
+ };
+
+ uart0: uart@101f1000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101f1000 0x1000>;
+ interrupts = <12>;
+ };
+
+ uart1: uart@101f2000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101f2000 0x1000>;
+ interrupts = <13>;
+ };
+
+ uart2: uart@101f3000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101f3000 0x1000>;
+ interrupts = <14>;
+ };
+
+ smc@10100000 {
+ compatible = "arm,primecell";
+ reg = <0x10100000 0x1000>;
+ };
+
+ mpmc@10110000 {
+ compatible = "arm,primecell";
+ reg = <0x10110000 0x1000>;
+ };
+
+ display@10120000 {
+ compatible = "arm,pl110", "arm,primecell";
+ reg = <0x10120000 0x1000>;
+ interrupts = <16>;
+ };
+
+ sctl@101e0000 {
+ compatible = "arm,primecell";
+ reg = <0x101e0000 0x1000>;
+ };
+
+ watchdog@101e1000 {
+ compatible = "arm,primecell";
+ reg = <0x101e1000 0x1000>;
+ interrupts = <0>;
+ };
+
+ gpio0: gpio@101e4000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x101e4000 0x1000>;
+ gpio-controller;
+ interrupts = <6>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@101e5000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x101e5000 0x1000>;
+ interrupts = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ rtc@101e8000 {
+ compatible = "arm,pl030", "arm,primecell";
+ reg = <0x101e8000 0x1000>;
+ interrupts = <10>;
+ };
+
+ sci@101f0000 {
+ compatible = "arm,primecell";
+ reg = <0x101f0000 0x1000>;
+ interrupts = <15>;
+ };
+
+ ssp@101f4000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x101f4000 0x1000>;
+ interrupts = <11>;
+ };
+
+ fpga {
+ compatible = "arm,versatile-fpga", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10000000 0x10000>;
+
+ aaci@4000 {
+ compatible = "arm,primecell";
+ reg = <0x4000 0x1000>;
+ interrupts = <24>;
+ };
+ mmc@5000 {
+ compatible = "arm,primecell";
+ reg = < 0x5000 0x1000>;
+ interrupts = <22>;
+ };
+ kmi@6000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&sic>;
+ interrupts = <3>;
+ };
+ kmi@7000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x7000 0x1000>;
+ interrupt-parent = <&sic>;
+ interrupts = <4>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
new file mode 100644
index 000000000000..8a614e398004
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -0,0 +1,48 @@
+/include/ "versatile-ab.dts"
+
+/ {
+ model = "ARM Versatile PB";
+ compatible = "arm,versatile-pb";
+
+ amba {
+ gpio2: gpio@101e6000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x101e6000 0x1000>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@101e7000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x101e7000 0x1000>;
+ interrupts = <9>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ fpga {
+ uart@9000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x9000 0x1000>;
+ interrupt-parent = <&sic>;
+ interrupts = <6>;
+ };
+ sci@a000 {
+ compatible = "arm,primecell";
+ reg = <0xa000 0x1000>;
+ interrupt-parent = <&sic>;
+ interrupts = <5>;
+ };
+ mmc@b000 {
+ compatible = "arm,primecell";
+ reg = <0xb000 0x1000>;
+ interrupts = <23>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
new file mode 100644
index 000000000000..37ca192fb193
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-ep107.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/ {
+ model = "Xilinx Zynq EP107";
+ compatible = "xlnx,zynq-ep107";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ intc: interrupt-controller@f8f01000 {
+ interrupt-controller;
+ compatible = "arm,gic";
+ reg = <0xF8F01000 0x1000>;
+ #interrupt-cells = <2>;
+ };
+
+ uart0: uart@e0000000 {
+ compatible = "xlnx,xuartps";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <59 0>;
+ clock = <50000000>;
+ };
+ };
+};
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 7bdd91766d65..3227ca952a12 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock);
/* Address of GIC 0 CPU interface */
void __iomem *gic_cpu_base_addr __read_mostly;
-struct gic_chip_data {
- unsigned int irq_offset;
- void __iomem *dist_base;
- void __iomem *cpu_base;
-};
-
/*
* Supported arch specific GIC irq extension.
* Default make them NULL.
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 14ad62e16dd1..a7934ba9e1df 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -144,7 +144,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
}
/* mapping for on-chip devices */
-int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
(dev->device == PCI_DEVICE_ID_ITE_8152)) {
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 5a6ff7c605df..db2cb7d180dc 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
+CONFIG_MACH_MX23EVK=y
+CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
# CONFIG_ARM_THUMB is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index a5cce242a775..97d31a4663da 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
+CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
@@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
CONFIG_PHONET=y
-CONFIG_PHONET_PIPECTRLR=y
# CONFIG_WIRELESS is not set
CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
@@ -64,14 +76,19 @@ CONFIG_GPIO_TC3589X=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_GADGET=y
+CONFIG_AB8500_USB=y
CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
@@ -79,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
@@ -91,6 +107,8 @@ CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
@@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 7e79503ab89b..86976d034382 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -208,16 +208,15 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
c = old;
- return c != u;
+ return c;
}
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_inc(v) atomic_add(1, v)
#define atomic_dec(v) atomic_sub(1, v)
@@ -460,9 +459,6 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL)
-#else /* !CONFIG_GENERIC_ATOMIC64 */
-#include <asm-generic/atomic64.h>
-#endif
-#include <asm-generic/atomic-long.h>
+#endif /* !CONFIG_GENERIC_ATOMIC64 */
#endif
#endif
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index f4280593dfa3..f7419ef9c8f9 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -310,10 +310,7 @@ static inline int find_next_bit_le(const void *p, int size, int offset)
/*
* Ext2 is defined to use little-endian byte ordering.
*/
-#define ext2_set_bit_atomic(lock, nr, p) \
- test_and_set_bit_le(nr, p)
-#define ext2_clear_bit_atomic(lock, nr, p) \
- test_and_clear_bit_le(nr, p)
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
#endif /* __KERNEL__ */
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index 765d33222369..80751c15c300 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -14,7 +14,12 @@
#include <linux/slab.h>
+#ifdef CONFIG_HAVE_MACH_CLKDEV
#include <mach/clkdev.h>
+#else
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
{
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 16bd48031583..99a6ed7e1bfd 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -45,8 +45,13 @@
#define L2X0_CLEAN_INV_LINE_PA 0x7F0
#define L2X0_CLEAN_INV_LINE_IDX 0x7F8
#define L2X0_CLEAN_INV_WAY 0x7FC
-#define L2X0_LOCKDOWN_WAY_D 0x900
-#define L2X0_LOCKDOWN_WAY_I 0x904
+/*
+ * The lockdown registers repeat 8 times for L310, the L210 has only one
+ * D and one I lockdown register at 0x0900 and 0x0904.
+ */
+#define L2X0_LOCKDOWN_WAY_D_BASE 0x900
+#define L2X0_LOCKDOWN_WAY_I_BASE 0x904
+#define L2X0_LOCKDOWN_STRIDE 0x08
#define L2X0_TEST_OPERATION 0xF00
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
@@ -64,7 +69,7 @@
#define L2X0_AUX_CTRL_MASK 0xc0000fff
#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17)
#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22
#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26
#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 0691f9dcc500..435d3f86c708 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
void gic_enable_ppi(unsigned int);
+
+struct gic_chip_data {
+ unsigned int irq_offset;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+};
#endif
#endif
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index b2f95c72287c..b3fea38d55c6 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -105,7 +105,7 @@ struct pci_sys_data;
extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
extern void it8152_init_irq(void);
-extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 2721a5814cb9..5a526afb5f18 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -23,6 +23,7 @@ struct pt_regs;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void handle_IRQ(unsigned int, struct pt_regs *);
void init_IRQ(void);
#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 3281fb4b12e3..217aa1911dd7 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -74,4 +74,11 @@ static const struct machine_desc __mach_desc_##_type \
#define MACHINE_END \
};
+#define DT_MACHINE_START(_name, _namestr) \
+static const struct machine_desc __mach_desc_##_name \
+ __used \
+ __attribute__((__section__(".arch.info.init"))) = { \
+ .nr = ~0, \
+ .name = _namestr,
+
#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 16330bd0657c..186efd4e05c9 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -25,7 +25,7 @@ struct hw_pci {
void (*preinit)(void);
void (*postinit)(void);
u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
- int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+ int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
};
/*
@@ -44,7 +44,7 @@ struct pci_sys_data {
/* Bridge swizzling */
u8 (*swizzle)(struct pci_dev *, u8 *);
/* IRQ mapping */
- int (*map_irq)(struct pci_dev *, u8, u8);
+ int (*map_irq)(const struct pci_dev *, u8, u8);
struct hw_pci *hw;
void *private_data; /* platform controller private data */
};
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 92e2a833693d..2b1f245db0c6 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -3,9 +3,19 @@
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
#include <asm/mach/pci.h> /* for pci_sys_data */
-#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+extern unsigned long pcibios_min_io;
+#define PCIBIOS_MIN_IO pcibios_min_io
+extern unsigned long pcibios_min_mem;
+#define PCIBIOS_MIN_MEM pcibios_min_mem
+
+static inline int pcibios_assign_all_busses(void)
+{
+ return pci_has_flag(PCI_REASSIGN_ALL_RSRC);
+}
#ifdef CONFIG_PCI_DOMAINS
static inline int pci_domain_nr(struct pci_bus *bus)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 67c70a31a1be..b7e82c4aced6 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -41,7 +41,7 @@ struct arm_pmu_platdata {
* encoded error on failure.
*/
extern struct platform_device *
-reserve_pmu(enum arm_pmu_type device);
+reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
@@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type);
* the actual hardware initialisation.
*/
extern int
-init_pmu(enum arm_pmu_type device);
+init_pmu(enum arm_pmu_type type);
#else /* CONFIG_CPU_HAS_PMU */
#include <linux/err.h>
static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
{
return ERR_PTR(-ENODEV);
}
static inline int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type type)
{
return -ENODEV;
}
static inline int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
{
return -ENODEV;
}
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index 11b8708fc4db..6f65ca86a5ec 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -16,11 +16,6 @@
#include <asm/setup.h>
#include <asm/irq.h>
-static inline void irq_dispose_mapping(unsigned int virq)
-{
- return;
-}
-
extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
extern void arm_dt_memblock_reserve(void);
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 250a4dd00630..91f40217bfa5 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -2,9 +2,10 @@
#define ASMARM_VGA_H
#include <linux/io.h>
-#include <mach/hardware.h>
-#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x))
+extern unsigned long vga_base;
+
+#define VGA_MAP_MEM(x,s) (vga_base + (x))
#define vga_readb(x) (*((volatile unsigned char *)x))
#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x))
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index acca35aebe28..aeef960ff795 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -112,9 +112,6 @@ EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
#endif
- /* crypto hash */
-EXPORT_SYMBOL(sha_transform);
-
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e4ee050aad7d..d6df359408f0 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -476,7 +476,7 @@ static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
/*
* Map a slot/pin to an IRQ.
*/
-static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_sys_data *sys = dev->sysdata;
int irq = -1;
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 80f7896cc016..9943e9e74a1b 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -178,7 +178,7 @@
CALL(sys_ni_syscall) /* vm86 */
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
- CALL(sys_nfsservctl)
+ CALL(sys_ni_syscall) /* was nfsservctl */
/* 170 */ CALL(sys_setresgid16)
CALL(sys_getresgid16)
CALL(sys_prctl)
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 0cdd7b456cb2..1a33e9d6bb1f 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -132,17 +132,3 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
return mdesc_best;
}
-
-/**
- * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
- *
- * Currently the mapping mechanism is trivial; simple flat hwirq numbers are
- * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not
- * supported.
- */
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- return intspec[0];
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 0f928a131af8..de3dcab8610b 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec)
}
/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
- * come via this function. Instead, they should provide their
- * own 'handler'
+ * handle_IRQ handles all hardware IRQ's. Decoded IRQs should
+ * not come via this function. Instead, they should provide their
+ * own 'handler'. Used by platform code implementing C-based 1st
+ * level decoding.
*/
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+void handle_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
@@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
set_irq_regs(old_regs);
}
+/*
+ * asm_do_IRQ is the interface to be used from assembly code.
+ */
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ handle_IRQ(irq, regs);
+}
+
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 7fa3bb0d2397..a08783823b32 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable)
@ enable access to CP0 and CP1
XSC(mrc p15, 0, r4, c15, c1, 0)
- XSC(orr r4, r4, #0xf)
+ XSC(orr r4, r4, #0x3)
XSC(mcr p15, 0, r4, c15, c1, 0)
PJ4(mrc p15, 0, r4, c1, c0, 2)
- PJ4(orr r4, r4, #0x3)
+ PJ4(orr r4, r4, #0xf)
PJ4(mcr p15, 0, r4, c1, c0, 2)
mov r0, #0 @ nothing to load
@@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch)
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: @ flip Conan access
+1: @ flip Concan access
XSC(eor r1, r1, #0x3)
XSC(mcr p15, 0, r1, c15, c1, 0)
PJ4(eor r1, r1, #0xf)
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 05b377616fd5..cc2020c2c709 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
#endif
s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
if (s && !is_smp())
+#ifdef CONFIG_SMP_ON_UP
fixup_smp((void *)s->sh_addr, s->sh_size);
+#else
+ return -EINVAL;
+#endif
return 0;
}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2b70709376c3..c53474fe84df 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev,
{
if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
pr_warning("received registration request for unknown "
- "device %d\n", type);
+ "PMU device type %d\n", type);
return -EINVAL;
}
@@ -112,17 +112,17 @@ static int __init register_pmu_driver(void)
device_initcall(register_pmu_driver);
struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
{
struct platform_device *pdev;
- if (test_and_set_bit_lock(device, &pmu_lock)) {
+ if (test_and_set_bit_lock(type, &pmu_lock)) {
pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[device] == NULL) {
- clear_bit_unlock(device, &pmu_lock);
+ } else if (pmu_devices[type] == NULL) {
+ clear_bit_unlock(type, &pmu_lock);
pdev = ERR_PTR(-ENODEV);
} else {
- pdev = pmu_devices[device];
+ pdev = pmu_devices[type];
}
return pdev;
@@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device)
EXPORT_SYMBOL_GPL(reserve_pmu);
int
-release_pmu(enum arm_pmu_type device)
+release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[device]))
+ if (WARN_ON(!pmu_devices[type]))
return -EINVAL;
- clear_bit_unlock(device, &pmu_lock);
+ clear_bit_unlock(type, &pmu_lock);
return 0;
}
EXPORT_SYMBOL_GPL(release_pmu);
@@ -182,17 +182,17 @@ init_cpu_pmu(void)
}
int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
{
int err = 0;
- switch (device) {
+ switch (type) {
case ARM_PMU_DEVICE_CPU:
err = init_cpu_pmu();
break;
default:
- pr_warning("attempt to initialise unknown device %d\n",
- device);
+ pr_warning("attempt to initialise PMU of unknown "
+ "type %d\n", type);
err = -EINVAL;
}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 5e1e54197227..1a347f481e5e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -30,6 +30,7 @@
#include <linux/uaccess.h>
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
+#include <linux/cpuidle.h>
#include <asm/cacheflush.h>
#include <asm/leds.h>
@@ -196,7 +197,8 @@ void cpu_idle(void)
cpu_relax();
} else {
stop_critical_timings();
- pm_idle();
+ if (cpuidle_idle_call())
+ pm_idle();
start_critical_timings();
/*
* This will eventually be removed - pm_idle
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 9cf4cbf8f95b..d0cdedf4864d 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -57,7 +57,8 @@ relocate_new_kernel:
mov r0,#0
ldr r1,kexec_mach_type
ldr r2,kexec_boot_atags
- mov pc,lr
+ ARM( mov pc, lr )
+ THUMB( bx lr )
.align
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 70bca649e925..e514c76043b4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -280,18 +280,19 @@ static void __init cacheid_init(void)
if (arch >= CPU_ARCH_ARMv6) {
if ((cachetype & (7 << 29)) == 4 << 29) {
/* ARMv7 register format */
+ arch = CPU_ARCH_ARMv7;
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
- else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
- cacheid |= CACHEID_VIPT_I_ALIASING;
- } else if (cachetype & (1 << 23)) {
- cacheid = CACHEID_VIPT_ALIASING;
} else {
- cacheid = CACHEID_VIPT_NONALIASING;
- if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
- cacheid |= CACHEID_VIPT_I_ALIASING;
+ arch = CPU_ARCH_ARMv6;
+ if (cachetype & (1 << 23))
+ cacheid = CACHEID_VIPT_ALIASING;
+ else
+ cacheid = CACHEID_VIPT_NONALIASING;
}
+ if (cpu_has_aliasing_icache(arch))
+ cacheid |= CACHEID_VIPT_I_ALIASING;
} else {
cacheid = CACHEID_VIVT;
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 167e3cbe1f2f..d88ff0230e82 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -27,7 +27,7 @@
#include <linux/clockchips.h>
#include <linux/completion.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 2c277d40cee6..01c186222f3b 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ clockevents_register_device(clk);
+
/* Make sure our local interrupt controller has this enabled */
gic_enable_ppi(clk->irq);
-
- clockevents_register_device(clk);
}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 2d3436e9f71f..bc9f9da782cb 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -25,7 +25,7 @@
#include <linux/init.h>
#include <linux/sched.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/cacheflush.h>
#include <asm/system.h>
#include <asm/unistd.h>
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 59ff42ddf0ae..cf73a7f742dd 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -12,7 +12,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
- ucmpdi2.o lib1funcs.o div64.o sha1.o \
+ ucmpdi2.o lib1funcs.o div64.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index 8678eb2b7a60..e6057fa851bb 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
#define CPSR2SPSR(rt) \
mrs rt, cpsr; \
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 9aaf7c72065d..88487c8c4f23 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index cd34503e424d..49b800419e32 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
deleted file mode 100644
index eb0edb80d7b8..000000000000
--- a/arch/arm/lib/sha1.S
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * linux/arch/arm/lib/sha1.S
- *
- * SHA transform optimized for ARM
- *
- * Copyright: (C) 2005 by Nicolas Pitre <nico@fluxnic.net>
- * Created: September 17, 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The reference implementation for this code is linux/lib/sha1.c
- */
-
-#include <linux/linkage.h>
-
- .text
-
-
-/*
- * void sha_transform(__u32 *digest, const char *in, __u32 *W)
- *
- * Note: the "in" ptr may be unaligned.
- */
-
-ENTRY(sha_transform)
-
- stmfd sp!, {r4 - r8, lr}
-
- @ for (i = 0; i < 16; i++)
- @ W[i] = be32_to_cpu(in[i]);
-
-#ifdef __ARMEB__
- mov r4, r0
- mov r0, r2
- mov r2, #64
- bl memcpy
- mov r2, r0
- mov r0, r4
-#else
- mov r3, r2
- mov lr, #16
-1: ldrb r4, [r1], #1
- ldrb r5, [r1], #1
- ldrb r6, [r1], #1
- ldrb r7, [r1], #1
- subs lr, lr, #1
- orr r5, r5, r4, lsl #8
- orr r6, r6, r5, lsl #8
- orr r7, r7, r6, lsl #8
- str r7, [r3], #4
- bne 1b
-#endif
-
- @ for (i = 0; i < 64; i++)
- @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
-
- sub r3, r2, #4
- mov lr, #64
-2: ldr r4, [r3, #4]!
- subs lr, lr, #1
- ldr r5, [r3, #8]
- ldr r6, [r3, #32]
- ldr r7, [r3, #52]
- eor r4, r4, r5
- eor r4, r4, r6
- eor r4, r4, r7
- mov r4, r4, ror #31
- str r4, [r3, #64]
- bne 2b
-
- /*
- * The SHA functions are:
- *
- * f1(B,C,D) = (D ^ (B & (C ^ D)))
- * f2(B,C,D) = (B ^ C ^ D)
- * f3(B,C,D) = ((B & C) | (D & (B | C)))
- *
- * Then the sub-blocks are processed as follows:
- *
- * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
- * B' = A
- * C' = ror(B, 2)
- * D' = C
- * E' = D
- *
- * We therefore unroll each loop 5 times to avoid register shuffling.
- * Also the ror for C (and also D and E which are successivelyderived
- * from it) is applied in place to cut on an additional mov insn for
- * each round.
- */
-
- .macro sha_f1, A, B, C, D, E
- ldr r3, [r2], #4
- eor ip, \C, \D
- add \E, r1, \E, ror #2
- and ip, \B, ip, ror #2
- add \E, \E, \A, ror #27
- eor ip, ip, \D, ror #2
- add \E, \E, r3
- add \E, \E, ip
- .endm
-
- .macro sha_f2, A, B, C, D, E
- ldr r3, [r2], #4
- add \E, r1, \E, ror #2
- eor ip, \B, \C, ror #2
- add \E, \E, \A, ror #27
- eor ip, ip, \D, ror #2
- add \E, \E, r3
- add \E, \E, ip
- .endm
-
- .macro sha_f3, A, B, C, D, E
- ldr r3, [r2], #4
- add \E, r1, \E, ror #2
- orr ip, \B, \C, ror #2
- add \E, \E, \A, ror #27
- and ip, ip, \D, ror #2
- add \E, \E, r3
- and r3, \B, \C, ror #2
- orr ip, ip, r3
- add \E, \E, ip
- .endm
-
- ldmia r0, {r4 - r8}
-
- mov lr, #4
- ldr r1, .L_sha_K + 0
-
- /* adjust initial values */
- mov r6, r6, ror #30
- mov r7, r7, ror #30
- mov r8, r8, ror #30
-
-3: subs lr, lr, #1
- sha_f1 r4, r5, r6, r7, r8
- sha_f1 r8, r4, r5, r6, r7
- sha_f1 r7, r8, r4, r5, r6
- sha_f1 r6, r7, r8, r4, r5
- sha_f1 r5, r6, r7, r8, r4
- bne 3b
-
- ldr r1, .L_sha_K + 4
- mov lr, #4
-
-4: subs lr, lr, #1
- sha_f2 r4, r5, r6, r7, r8
- sha_f2 r8, r4, r5, r6, r7
- sha_f2 r7, r8, r4, r5, r6
- sha_f2 r6, r7, r8, r4, r5
- sha_f2 r5, r6, r7, r8, r4
- bne 4b
-
- ldr r1, .L_sha_K + 8
- mov lr, #4
-
-5: subs lr, lr, #1
- sha_f3 r4, r5, r6, r7, r8
- sha_f3 r8, r4, r5, r6, r7
- sha_f3 r7, r8, r4, r5, r6
- sha_f3 r6, r7, r8, r4, r5
- sha_f3 r5, r6, r7, r8, r4
- bne 5b
-
- ldr r1, .L_sha_K + 12
- mov lr, #4
-
-6: subs lr, lr, #1
- sha_f2 r4, r5, r6, r7, r8
- sha_f2 r8, r4, r5, r6, r7
- sha_f2 r7, r8, r4, r5, r6
- sha_f2 r6, r7, r8, r4, r5
- sha_f2 r5, r6, r7, r8, r4
- bne 6b
-
- ldmia r0, {r1, r2, r3, ip, lr}
- add r4, r1, r4
- add r5, r2, r5
- add r6, r3, r6, ror #2
- add r7, ip, r7, ror #2
- add r8, lr, r8, ror #2
- stmia r0, {r4 - r8}
-
- ldmfd sp!, {r4 - r8, pc}
-
-ENDPROC(sha_transform)
-
- .align 2
-.L_sha_K:
- .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
-
-
-/*
- * void sha_init(__u32 *buf)
- */
-
- .align 2
-.L_sha_initial_digest:
- .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
-
-ENTRY(sha_init)
-
- str lr, [sp, #-4]!
- adr r1, .L_sha_initial_digest
- ldmia r1, {r1, r2, r3, ip, lr}
- stmia r0, {r1, r2, r3, ip, lr}
- ldr pc, [sp], #4
-
-ENDPROC(sha_init)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 96966231920c..bf57e8b1c9d0 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := irq.o gpio.o
+obj-y := irq.o gpio.o setup.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index f1013d08bb57..bfc684441ef8 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -25,23 +25,10 @@
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91cap9_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
- .length = AT91CAP9_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -339,24 +326,17 @@ static void at91cap9_poweroff(void)
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
-void __init at91cap9_map_io(void)
+static void __init at91cap9_map_io(void)
{
- /* Map peripherals */
- iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+ at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
}
-void __init at91cap9_initialize(unsigned long main_clock)
+static void __init at91cap9_initialize(void)
{
at91_arch_reset = at91cap9_reset;
pm_power_off = at91cap9_poweroff;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91cap9_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91cap9_gpio, 4);
@@ -409,14 +389,9 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
-void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91cap9_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91cap9_soc = {
+ .map_io = at91cap9_map_io,
+ .default_irq_priority = at91cap9_default_irq_priority,
+ .register_clocks = at91cap9_register_clocks,
+ .init = at91cap9_initialize,
+};
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 83a1a3fee554..f73302dbc6a5 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -20,25 +20,16 @@
#include <mach/at91_st.h>
#include <mach/cpu.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
static struct map_desc at91rm9200_io_desc[] __initdata = {
{
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = AT91_VA_BASE_EMAC,
.pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
- .length = AT91RM9200_SRAM_SIZE,
- .type = MT_DEVICE,
},
};
@@ -304,24 +295,17 @@ static void at91rm9200_reset(void)
at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
}
-int rm9200_type;
-EXPORT_SYMBOL(rm9200_type);
-
-void __init at91rm9200_set_type(int type)
-{
- rm9200_type = type;
-}
-
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
-void __init at91rm9200_map_io(void)
+static void __init at91rm9200_map_io(void)
{
/* Map peripherals */
+ at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
}
-void __init at91rm9200_initialize(unsigned long main_clock)
+static void __init at91rm9200_initialize(void)
{
at91_arch_reset = at91rm9200_reset;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
@@ -329,12 +313,6 @@ void __init at91rm9200_initialize(unsigned long main_clock)
| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
| (1 << AT91RM9200_ID_IRQ6);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91rm9200_register_clocks();
-
/* Initialize GPIO subsystem */
at91_gpio_init(at91rm9200_gpio,
cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
@@ -383,14 +361,9 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */
};
-void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91rm9200_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91rm9200_soc = {
+ .map_io = at91rm9200_map_io,
+ .default_irq_priority = at91rm9200_default_irq_priority,
+ .register_clocks = at91rm9200_register_clocks,
+ .init = at91rm9200_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 7d606b04d313..cb397be14448 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -17,58 +17,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/cpu.h>
+#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91sam9260_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }
-};
-
-static struct map_desc at91sam9260_sram_desc[] __initdata = {
- {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
- .length = AT91SAM9260_SRAM0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
- .length = AT91SAM9260_SRAM1_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-static struct map_desc at91sam9g20_sram_desc[] __initdata = {
- {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE),
- .length = AT91SAM9G20_SRAM0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE),
- .length = AT91SAM9G20_SRAM1_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-static struct map_desc at91sam9xe_sram_desc[] __initdata = {
- {
- .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
- .type = MT_DEVICE,
- }
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -330,11 +288,9 @@ static void at91sam9260_poweroff(void)
static void __init at91sam9xe_map_io(void)
{
- unsigned long cidr, sram_size;
-
- cidr = at91_sys_read(AT91_DBGU_CIDR);
+ unsigned long sram_size;
- switch (cidr & AT91_CIDR_SRAMSIZ) {
+ switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) {
case AT91_CIDR_SRAMSIZ_32K:
sram_size = 2 * SZ_16K;
break;
@@ -343,38 +299,29 @@ static void __init at91sam9xe_map_io(void)
sram_size = SZ_16K;
}
- at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
- at91sam9xe_sram_desc->length = sram_size;
-
- iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+ at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size);
}
-void __init at91sam9260_map_io(void)
+static void __init at91sam9260_map_io(void)
{
- /* Map peripherals */
- iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
-
- if (cpu_is_at91sam9xe())
+ if (cpu_is_at91sam9xe()) {
at91sam9xe_map_io();
- else if (cpu_is_at91sam9g20())
- iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
- else
- iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+ } else if (cpu_is_at91sam9g20()) {
+ at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE);
+ at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE);
+ } else {
+ at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE);
+ at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE);
+ }
}
-void __init at91sam9260_initialize(unsigned long main_clock)
+static void __init at91sam9260_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9260_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
}
@@ -421,14 +368,9 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9260_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91sam9260_soc = {
+ .map_io = at91sam9260_map_io,
+ .default_irq_priority = at91sam9260_default_irq_priority,
+ .register_clocks = at91sam9260_register_clocks,
+ .init = at91sam9260_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index c1483168c97a..6c8e3b5f669f 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -22,36 +22,10 @@
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91sam9261_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc at91sam9261_sram_desc[] __initdata = {
- {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
- .length = AT91SAM9261_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc at91sam9g10_sram_desc[] __initdata = {
- {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
- .length = AT91SAM9G10_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -183,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
@@ -302,30 +276,21 @@ static void at91sam9261_poweroff(void)
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9261_map_io(void)
+static void __init at91sam9261_map_io(void)
{
- /* Map peripherals */
- iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
if (cpu_is_at91sam9g10())
- iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+ at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE);
else
- iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+ at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
}
-void __init at91sam9261_initialize(unsigned long main_clock)
+static void __init at91sam9261_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9261_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
}
@@ -372,14 +337,9 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9261_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91sam9261_soc = {
+ .map_io = at91sam9261_map_io,
+ .default_irq_priority = at91sam9261_default_irq_priority,
+ .register_clocks = at91sam9261_register_clocks,
+ .init = at91sam9261_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index dc28477d14ff..044f3c927e64 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -21,28 +21,10 @@
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91sam9263_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
- .length = AT91SAM9263_SRAM0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
- .length = AT91SAM9263_SRAM1_SIZE,
- .type = MT_DEVICE,
- },
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -313,24 +295,18 @@ static void at91sam9263_poweroff(void)
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9263_map_io(void)
+static void __init at91sam9263_map_io(void)
{
- /* Map peripherals */
- iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+ at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE);
+ at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
}
-void __init at91sam9263_initialize(unsigned long main_clock)
+static void __init at91sam9263_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9263_poweroff;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9263_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
}
@@ -377,14 +353,9 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
-void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9263_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91sam9263_soc = {
+ .map_io = at91sam9263_map_io,
+ .default_irq_priority = at91sam9263_default_irq_priority,
+ .register_clocks = at91sam9263_register_clocks,
+ .init = at91sam9263_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 11e214121b23..e04c5fb6f1ee 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -22,23 +22,10 @@
#include <mach/at91_shdwc.h>
#include <mach/cpu.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91sam9g45_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
- .length = AT91SAM9G45_SRAM_SIZE,
- .type = MT_DEVICE,
- }
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -329,24 +316,17 @@ static void at91sam9g45_poweroff(void)
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9g45_map_io(void)
+static void __init at91sam9g45_map_io(void)
{
- /* Map peripherals */
- iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+ at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
}
-void __init at91sam9g45_initialize(unsigned long main_clock)
+static void __init at91sam9g45_initialize(void)
{
at91_arch_reset = at91sam9g45_reset;
pm_power_off = at91sam9g45_poweroff;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9g45_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
}
@@ -393,14 +373,9 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ0) */
};
-void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9g45_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91sam9g45_soc = {
+ .map_io = at91sam9g45_map_io,
+ .default_irq_priority = at91sam9g45_default_irq_priority,
+ .register_clocks = at91sam9g45_register_clocks,
+ .init = at91sam9g45_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 29dff18ed130..a238105d2c11 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -16,30 +16,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/cpu.h>
+#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include "soc.h"
#include "generic.h"
#include "clock.h"
-static struct map_desc at91sam9rl_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc at91sam9rl_sram_desc[] __initdata = {
- {
- .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
- .type = MT_DEVICE,
- }
-};
-
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -287,16 +273,11 @@ static void at91sam9rl_poweroff(void)
* AT91SAM9RL processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9rl_map_io(void)
+static void __init at91sam9rl_map_io(void)
{
- unsigned long cidr, sram_size;
-
- /* Map peripherals */
- iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
-
- cidr = at91_sys_read(AT91_DBGU_CIDR);
+ unsigned long sram_size;
- switch (cidr & AT91_CIDR_SRAMSIZ) {
+ switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) {
case AT91_CIDR_SRAMSIZ_32K:
sram_size = 2 * SZ_16K;
break;
@@ -305,25 +286,16 @@ void __init at91sam9rl_map_io(void)
sram_size = SZ_16K;
}
- at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
- at91sam9rl_sram_desc->length = sram_size;
-
/* Map SRAM */
- iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+ at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
-void __init at91sam9rl_initialize(unsigned long main_clock)
+static void __init at91sam9rl_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9rl_poweroff;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9rl_register_clocks();
-
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
}
@@ -370,14 +342,9 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9rl_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+struct at91_init_soc __initdata at91sam9rl_soc = {
+ .map_io = at91sam9rl_map_io,
+ .default_irq_priority = at91sam9rl_default_irq_priority,
+ .register_clocks = at91sam9rl_register_clocks,
+ .init = at91sam9rl_initialize,
+};
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index ab1d463aa47d..5aa58851eb39 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -46,7 +46,7 @@ static void __init onearm_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -63,11 +63,6 @@ static void __init onearm_init_early(void)
at91_set_serial_console(0);
}
-static void __init onearm_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -97,8 +92,8 @@ static void __init onearm_board_init(void)
MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = onearm_init_early,
- .init_irq = onearm_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = onearm_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index a4924de48c36..b0c796d42e49 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -51,7 +51,7 @@
static void __init afeb9260_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void)
at91_set_serial_console(0);
}
-static void __init afeb9260_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -219,9 +213,9 @@ static void __init afeb9260_board_init(void)
MACHINE_START(AFEB9260, "Custom afeb9260 board")
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = afeb9260_init_early,
- .init_irq = afeb9260_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = afeb9260_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 148fccb9a25a..d1abd5898e85 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -48,7 +48,7 @@
static void __init cam60_init_early(void)
{
/* Initialize processor: 10 MHz crystal */
- at91sam9260_initialize(10000000);
+ at91_initialize(10000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -57,12 +57,6 @@ static void __init cam60_init_early(void)
at91_set_serial_console(0);
}
-static void __init cam60_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host
*/
@@ -199,8 +193,8 @@ static void __init cam60_board_init(void)
MACHINE_START(CAM60, "KwikByte CAM60")
/* Maintainer: KwikByte */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = cam60_init_early,
- .init_irq = cam60_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = cam60_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index cdb65d483250..679b0b743e92 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -53,7 +53,7 @@
static void __init cap9adk_init_early(void)
{
/* Initialize processor: 12 MHz crystal */
- at91cap9_initialize(12000000);
+ at91_initialize(12000000);
/* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
@@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void)
at91_set_serial_console(0);
}
-static void __init cap9adk_init_irq(void)
-{
- at91cap9_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -397,8 +391,8 @@ static void __init cap9adk_board_init(void)
MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
.timer = &at91sam926x_timer,
- .map_io = at91cap9_map_io,
+ .map_io = at91_map_io,
.init_early = cap9adk_init_early,
- .init_irq = cap9adk_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = cap9adk_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index f36b18687494..c578c5d90728 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -43,7 +43,7 @@
static void __init carmeva_init_early(void)
{
/* Initialize processor: 20.000 MHz crystal */
- at91rm9200_initialize(20000000);
+ at91_initialize(20000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -57,11 +57,6 @@ static void __init carmeva_init_early(void)
at91_set_serial_console(0);
}
-static void __init carmeva_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -163,8 +158,8 @@ static void __init carmeva_board_init(void)
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = carmeva_init_early,
- .init_irq = carmeva_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = carmeva_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 980511084fe4..f4da8a16d5dc 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -50,7 +50,7 @@
static void __init cpu9krea_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void)
at91_set_serial_console(0);
}
-static void __init cpu9krea_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
/*
* USB Host port
*/
@@ -376,8 +371,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
#endif
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = cpu9krea_init_early,
- .init_irq = cpu9krea_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = cpu9krea_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 6daabe3907a1..2d919f5a4f57 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -57,7 +57,7 @@ static void __init cpuat91_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void)
at91_set_serial_console(0);
}
-static void __init cpuat91_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata cpuat91_eth_data = {
.is_rmii = 1,
};
@@ -180,8 +175,8 @@ static void __init cpuat91_board_init(void)
MACHINE_START(CPUAT91, "Eukrea")
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = cpuat91_init_early,
- .init_irq = cpuat91_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = cpuat91_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index d98bcec1dfe0..17654d5e94e6 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -46,7 +46,7 @@
static void __init csb337_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400);
+ at91_initialize(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -58,11 +58,6 @@ static void __init csb337_init_early(void)
at91_set_serial_console(0);
}
-static void __init csb337_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
@@ -258,8 +253,8 @@ static void __init csb337_board_init(void)
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = csb337_init_early,
- .init_irq = csb337_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = csb337_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 019aab4e20b0..72b55674616c 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -43,7 +43,7 @@
static void __init csb637_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400);
+ at91_initialize(3686400);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -52,11 +52,6 @@ static void __init csb637_init_early(void)
at91_set_serial_console(0);
}
-static void __init csb637_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
@@ -139,8 +134,8 @@ static void __init csb637_board_init(void)
MACHINE_START(CSB637, "Cogent CSB637")
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = csb637_init_early,
- .init_irq = csb637_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = csb637_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index e9484535cbc8..01170a2766a8 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -43,7 +43,7 @@
static void __init eb9200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -60,11 +60,6 @@ static void __init eb9200_init_early(void)
at91_set_serial_console(0);
}
-static void __init eb9200_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -121,8 +116,8 @@ static void __init eb9200_board_init(void)
MACHINE_START(ATEB9200, "Embest ATEB9200")
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = eb9200_init_early,
- .init_irq = eb9200_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = eb9200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index a6f57faa10a7..7c0313c51f26 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -49,7 +49,7 @@ static void __init ecb_at91init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
@@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void)
at91_set_serial_console(0);
}
-static void __init ecb_at91init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata ecb_at91eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
@@ -173,8 +168,8 @@ static void __init ecb_at91board_init(void)
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
/* Maintainer: emQbit.com */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = ecb_at91init_early,
- .init_irq = ecb_at91init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ecb_at91board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index bfc0062d1483..8252c722607b 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -35,7 +35,7 @@ static void __init eco920_init_early(void)
/* Set cpu type: PQFP */
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -47,11 +47,6 @@ static void __init eco920_init_early(void)
at91_set_serial_console(0);
}
-static void __init eco920_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata eco920_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 1,
@@ -135,8 +130,8 @@ static void __init eco920_board_init(void)
MACHINE_START(ECO920, "eco920")
/* Maintainer: Sascha Hauer */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = eco920_init_early,
- .init_irq = eco920_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = eco920_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 466c063b8d21..4c3f65d9c59b 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -40,7 +40,7 @@
static void __init flexibity_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -49,11 +49,6 @@ static void __init flexibity_init_early(void)
at91_set_serial_console(0);
}
-static void __init flexibity_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
/* USB Host port */
static struct at91_usbh_data __initdata flexibity_usbh_data = {
.ports = 2,
@@ -155,8 +150,8 @@ static void __init flexibity_board_init(void)
MACHINE_START(FLEXIBITY, "Flexibity Connect")
/* Maintainer: Maxim Osipov */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = flexibity_init_early,
- .init_irq = flexibity_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = flexibity_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index e2d1dc9eff45..f27d1a780cfa 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -60,7 +60,7 @@
static void __init foxg20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -101,12 +101,6 @@ static void __init foxg20_init_early(void)
}
-static void __init foxg20_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -267,8 +261,8 @@ static void __init foxg20_board_init(void)
MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
/* Maintainer: Sergio Tanzilli */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = foxg20_init_early,
- .init_irq = foxg20_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = foxg20_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 1d4f36b3cb27..2e95949737e6 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void)
at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
}
-static void __init init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
/*
* Two USB Host ports
*/
@@ -577,8 +572,8 @@ static void __init gsia18s_board_init(void)
MACHINE_START(GSIA18S, "GS_IA18_S")
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = gsia18s_init_early,
- .init_irq = init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = gsia18s_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9b003ff744ba..4a170890b3b1 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -46,7 +46,7 @@ static void __init kafa_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
@@ -61,11 +61,6 @@ static void __init kafa_init_early(void)
at91_set_serial_console(0);
}
-static void __init kafa_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
@@ -99,8 +94,8 @@ static void __init kafa_board_init(void)
MACHINE_START(KAFA, "Sperry-Sun KAFA")
/* Maintainer: Sergei Sharonov */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = kafa_init_early,
- .init_irq = kafa_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = kafa_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index a813a74b65f9..9dc8d496ead1 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -48,7 +48,7 @@ static void __init kb9202_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 10 MHz crystal */
- at91rm9200_initialize(10000000);
+ at91_initialize(10000000);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
@@ -69,11 +69,6 @@ static void __init kb9202_init_early(void)
at91_set_serial_console(0);
}
-static void __init kb9202_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
@@ -140,8 +135,8 @@ static void __init kb9202_board_init(void)
MACHINE_START(KB9200, "KB920x")
/* Maintainer: KwikByte, Inc. */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = kb9202_init_early,
- .init_irq = kb9202_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = kb9202_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 961e805db68c..9bc6ab32e0ac 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -54,7 +54,7 @@
static void __init neocore926_init_early(void)
{
/* Initialize processor: 20 MHz crystal */
- at91sam9263_initialize(20000000);
+ at91_initialize(20000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -66,12 +66,6 @@ static void __init neocore926_init_early(void)
at91_set_serial_console(0);
}
-static void __init neocore926_init_irq(void)
-{
- at91sam9263_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -388,8 +382,8 @@ static void __init neocore926_board_init(void)
MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
/* Maintainer: ADENEO */
.timer = &at91sam926x_timer,
- .map_io = at91sam9263_map_io,
+ .map_io = at91_map_io,
.init_early = neocore926_init_early,
- .init_irq = neocore926_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = neocore926_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 21a21af25878..49e3f699b48e 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void)
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
}
-
-static void __init init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
@@ -223,8 +216,8 @@ static void __init pcontrol_g20_board_init(void)
MACHINE_START(PCONTROL_G20, "PControl G20")
/* Maintainer: pgsellmann@portner-elektronik.at */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = pcontrol_g20_init_early,
- .init_irq = init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = pcontrol_g20_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 756cc2a745dd..b7b8390e8a00 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -46,7 +46,7 @@
static void __init picotux200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -60,11 +60,6 @@ static void __init picotux200_init_early(void)
at91_set_serial_console(0);
}
-static void __init picotux200_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata picotux200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -124,8 +119,8 @@ static void __init picotux200_board_init(void)
MACHINE_START(PICOTUX2XX, "picotux 200")
/* Maintainer: Kleinhenz Elektronik GmbH */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = picotux200_init_early,
- .init_irq = picotux200_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = picotux200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index d1a6001b0bd8..81f911033681 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -51,7 +51,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
- at91sam9260_initialize(12000000);
+ at91_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -72,12 +72,6 @@ static void __init ek_init_early(void)
}
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -269,8 +263,8 @@ static void __init ek_board_init(void)
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index aef9627710b0..6f08faadb474 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -48,7 +48,7 @@
static void __init dk_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -65,11 +65,6 @@ static void __init dk_init_early(void)
at91_set_serial_console(0);
}
-static void __init dk_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -228,8 +223,8 @@ static void __init dk_board_init(void)
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = dk_init_early,
- .init_irq = dk_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = dk_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 015a02183080..85bcccd7b9e4 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -48,7 +48,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
@@ -65,11 +65,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -194,8 +189,8 @@ static void __init ek_board_init(void)
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index aaf1bf0989b3..4d3a02f1289e 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -47,7 +47,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
@@ -67,12 +67,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -213,8 +207,8 @@ static void __init ek_board_init(void)
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 5c240743c5b7..8a50c3e67186 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -53,7 +53,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -70,12 +70,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -354,8 +348,8 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b60c22b6e241..5096a0ec50c1 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -57,7 +57,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9261_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
@@ -69,12 +69,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9261_init_interrupts(NULL);
-}
-
-
/*
* DM9000 ethernet device
*/
@@ -621,8 +615,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
#endif
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9261_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 9bbdc92ea194..ea8f185d3b9d 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -56,7 +56,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 16.367 MHz crystal */
- at91sam9263_initialize(16367660);
+ at91_initialize(16367660);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -68,12 +68,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9263_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -452,8 +446,8 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9263_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 1325a50101a8..817f59d7251b 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -64,7 +64,7 @@ static int inline ek_have_2mmc(void)
static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -81,12 +81,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -404,17 +398,17 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 33eaa135f248..ad234ccbf57e 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -50,7 +50,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
- at91sam9g45_initialize(12000000);
+ at91_initialize(12000000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -63,12 +63,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9g45_init_interrupts(NULL);
-}
-
-
/*
* USB HS Host port (common to OHCI & EHCI)
*/
@@ -422,8 +416,8 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9g45_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index effb399a80a6..4f14b54b93a8 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -41,7 +41,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
- at91sam9rl_initialize(12000000);
+ at91_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -53,12 +53,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9rl_init_interrupts(NULL);
-}
-
-
/*
* USB HS Device port
*/
@@ -330,8 +324,8 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
- .map_io = at91sam9rl_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 6010ce16b3cf..c73d25e5faea 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -42,7 +42,7 @@
static void __init snapper9260_init_early(void)
{
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* Debug on ttyS0 */
at91_register_uart(0, 0, 0);
@@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void)
at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
}
-static void __init snapper9260_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
.ports = 2,
};
@@ -179,9 +174,9 @@ static void __init snapper9260_board_init(void)
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = snapper9260_init_early,
- .init_irq = snapper9260_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = snapper9260_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5e5c85688f5f..936e5fd7f406 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -35,7 +35,7 @@
void __init stamp9g20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ at91_initialize(18432000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void)
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
}
-static void __init init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* NAND flash
*/
@@ -299,17 +293,17 @@ static void __init stamp9g20evb_board_init(void)
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = portuxg20_init_early,
- .init_irq = init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
MACHINE_END
MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = stamp9g20evb_init_early,
- .init_irq = init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 0e784e6fedec..8c4c1a02c4be 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -51,7 +51,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
- at91sam9260_initialize(12000000);
+ at91_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -60,12 +60,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -229,8 +223,8 @@ static void __init ek_board_init(void)
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
- .map_io = at91sam9260_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index cf626dd14b2c..25e793782a4e 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -50,7 +50,7 @@
static void __init ek_init_early(void)
{
/* Initialize processor: 12.00 MHz crystal */
- at91sam9263_initialize(12000000);
+ at91_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -59,12 +59,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static void __init ek_init_irq(void)
-{
- at91sam9263_init_interrupts(NULL);
-}
-
-
/*
* USB Host port
*/
@@ -245,8 +239,8 @@ static void __init ek_board_init(void)
MACHINE_START(USB_A9263, "CALAO USB_A9263")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
- .map_io = at91sam9263_map_io,
+ .map_io = at91_map_io,
.init_early = ek_init_early,
- .init_irq = ek_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index c208cc334d7d..95edcbd2aec6 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -56,7 +56,7 @@ static void __init yl9200_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000);
+ at91_initialize(18432000);
/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
@@ -79,12 +79,6 @@ static void __init yl9200_init_early(void)
at91_set_serial_console(0);
}
-static void __init yl9200_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-
/*
* LEDs
*/
@@ -599,8 +593,8 @@ static void __init yl9200_board_init(void)
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
.timer = &at91rm9200_timer,
- .map_io = at91rm9200_map_io,
+ .map_io = at91_map_io,
.init_early = yl9200_init_early,
- .init_irq = yl9200_init_irq,
+ .init_irq = at91_init_irq_default,
.init_machine = yl9200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 8ff3418f3430..938b34f57741 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -11,35 +11,19 @@
#include <linux/clkdev.h>
/* Map io */
-extern void __init at91rm9200_map_io(void);
-extern void __init at91sam9260_map_io(void);
-extern void __init at91sam9261_map_io(void);
-extern void __init at91sam9263_map_io(void);
-extern void __init at91sam9rl_map_io(void);
-extern void __init at91sam9g45_map_io(void);
-extern void __init at91x40_map_io(void);
-extern void __init at91cap9_map_io(void);
+extern void __init at91_map_io(void);
+extern void __init at91_init_sram(int bank, unsigned long base,
+ unsigned int length);
/* Processors */
extern void __init at91rm9200_set_type(int type);
-extern void __init at91rm9200_initialize(unsigned long main_clock);
-extern void __init at91sam9260_initialize(unsigned long main_clock);
-extern void __init at91sam9261_initialize(unsigned long main_clock);
-extern void __init at91sam9263_initialize(unsigned long main_clock);
-extern void __init at91sam9rl_initialize(unsigned long main_clock);
-extern void __init at91sam9g45_initialize(unsigned long main_clock);
+extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
-extern void __init at91cap9_initialize(unsigned long main_clock);
/* Interrupts */
-extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
+extern void __init at91_init_irq_default(void);
+extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
@@ -49,7 +33,6 @@ extern struct sys_timer at91sam926x_timer;
extern struct sys_timer at91x40_timer;
/* Clocks */
-extern int __init at91_clock_init(unsigned long main_clock);
/*
* function to specify the clock of the default console. As we do not
* use the device/driver bus, the dev_name is not intialize. So we need
@@ -62,6 +45,11 @@ extern void __init at91sam9263_set_console_clock(int id);
extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
extern void __init at91cap9_set_console_clock(int id);
+#ifdef CONFIG_AT91_PMC_UNIT
+extern int __init at91_clock_init(unsigned long main_clock);
+#else
+static int inline at91_clock_init(unsigned long main_clock) { return 0; }
+#endif
struct device;
/* Power Management */
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index 6dcaa7716871..dbfe455a4c41 100644
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -16,22 +16,25 @@
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
+#define dbgu_readl(dbgu, field) \
+ __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
+
#ifdef AT91_DBGU
-#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
-#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
-#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
+#define AT91_DBGU_CR (0x00) /* Control Register */
+#define AT91_DBGU_MR (0x04) /* Mode Register */
+#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
-#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
+#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */
+#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */
+#define AT91_DBGU_SR (0x14) /* Status Register */
+#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */
+#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
+#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */
-#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
-#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */
+#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */
+#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
#endif /* AT91_DBGU */
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
deleted file mode 100644
index fecc2e9f0ca8..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_wdt.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_wdt.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
-#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
-#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
-#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
-#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
-#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
-#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
-#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
-#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
-#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
-#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-
-#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
-#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
-#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 665993849a7b..c5df1e8f1955 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -75,7 +75,6 @@
#define AT91CAP9_BASE_EMAC 0xfffbc000
#define AT91CAP9_BASE_ADC 0xfffc0000
#define AT91CAP9_BASE_ISI 0xfffc4000
-#define AT91_BASE_SYS 0xffffe200
/*
* System Peripherals (offset from AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 99e0f8d02d7b..e4037b500302 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -74,7 +74,6 @@
#define AT91RM9200_BASE_SSC1 0xfffd4000
#define AT91RM9200_BASE_SSC2 0xfffd8000
#define AT91RM9200_BASE_SPI 0xfffe0000
-#define AT91_BASE_SYS 0xfffff000
/*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 8b6bf835cd73..9a791165913f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -76,7 +76,6 @@
#define AT91SAM9260_BASE_TC4 0xfffdc040
#define AT91SAM9260_BASE_TC5 0xfffdc080
#define AT91SAM9260_BASE_ADC 0xfffe0000
-#define AT91_BASE_SYS 0xffffe800
/*
* System Peripherals (offset from AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index eafbddaf523c..ce596204cefa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -60,7 +60,6 @@
#define AT91SAM9261_BASE_SSC2 0xfffc4000
#define AT91SAM9261_BASE_SPI0 0xfffc8000
#define AT91SAM9261_BASE_SPI1 0xfffcc000
-#define AT91_BASE_SYS 0xffffea00
/*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index e2d348213a7b..f1b92961a2b1 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -70,7 +70,6 @@
#define AT91SAM9263_BASE_EMAC 0xfffbc000
#define AT91SAM9263_BASE_ISI 0xfffc4000
#define AT91SAM9263_BASE_2DGE 0xfffc8000
-#define AT91_BASE_SYS 0xffffe000
/*
* System Peripherals (offset from AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 659304aa73d9..2c611b9a0138 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -82,7 +82,6 @@
#define AT91SAM9G45_BASE_TC3 0xfffd4000
#define AT91SAM9G45_BASE_TC4 0xfffd4040
#define AT91SAM9G45_BASE_TC5 0xfffd4080
-#define AT91_BASE_SYS 0xffffe200
/*
* System Peripherals (offset from AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 41dbbe61055c..1aabacd315d4 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -64,7 +64,6 @@
#define AT91SAM9RL_BASE_TSC 0xfffd0000
#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-#define AT91_BASE_SYS 0xffffc000
/*
diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-at91/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index df966c2bc2d4..f6ce936dba2b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -1,7 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/cpu.h
*
- * Copyright (C) 2006 SAN People
+ * Copyright (C) 2006 SAN People
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -10,12 +11,8 @@
*
*/
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <mach/hardware.h>
-#include <mach/at91_dbgu.h>
-
+#ifndef __MACH_CPU_H__
+#define __MACH_CPU_H__
#define ARCH_ID_AT91RM9200 0x09290780
#define ARCH_ID_AT91SAM9260 0x019803a0
@@ -39,16 +36,6 @@
#define ARCH_ID_AT91M40807 0x14080745
#define ARCH_ID_AT91R40008 0x44000840
-static inline unsigned long at91_cpu_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-static inline unsigned long at91_cpu_fully_identify(void)
-{
- return at91_sys_read(AT91_DBGU_CIDR);
-}
-
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
#define ARCH_EXID_AT91SAM9G46 0x00000003
@@ -60,40 +47,80 @@ static inline unsigned long at91_cpu_fully_identify(void)
#define ARCH_EXID_AT91SAM9G25 0x00000003
#define ARCH_EXID_AT91SAM9X25 0x00000004
-static inline unsigned long at91_exid_identify(void)
-{
- return at91_sys_read(AT91_DBGU_EXID);
-}
-
-
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-static inline unsigned long at91_arch_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-}
-
-#ifdef CONFIG_ARCH_AT91CAP9
-#include <mach/at91_pmc.h>
-
+/* PMC revision */
#define ARCH_REVISION_CAP9_B 0x399
#define ARCH_REVISION_CAP9_C 0x601
-static inline unsigned long at91cap9_rev_identify(void)
+/* RM9200 type */
+#define ARCH_REVISON_9200_BGA (0 << 0)
+#define ARCH_REVISON_9200_PQFP (1 << 0)
+
+enum at91_soc_type {
+ /* 920T */
+ AT91_SOC_RM9200,
+
+ /* CAP */
+ AT91_SOC_CAP9,
+
+ /* SAM92xx */
+ AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
+
+ /* SAM9Gxx */
+ AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45,
+
+ /* SAM9RL */
+ AT91_SOC_SAM9RL,
+
+ /* SAM9X5 */
+ AT91_SOC_SAM9X5,
+
+ /* Unknown type */
+ AT91_SOC_NONE
+};
+
+enum at91_soc_subtype {
+ /* RM9200 */
+ AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
+
+ /* CAP9 */
+ AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
+
+ /* SAM9260 */
+ AT91_SOC_SAM9XE,
+
+ /* SAM9G45 */
+ AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11,
+
+ /* SAM9X5 */
+ AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
+ AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
+
+ /* Unknown subtype */
+ AT91_SOC_SUBTYPE_NONE
+};
+
+struct at91_socinfo {
+ unsigned int type, subtype;
+ unsigned int cidr, exid;
+};
+
+extern struct at91_socinfo at91_soc_initdata;
+const char *at91_get_soc_type(struct at91_socinfo *c);
+const char *at91_get_soc_subtype(struct at91_socinfo *c);
+
+static inline int at91_soc_is_detected(void)
{
- return (at91_sys_read(AT91_PMC_VER));
+ return at91_soc_initdata.type != AT91_SOC_NONE;
}
-#endif
#ifdef CONFIG_ARCH_AT91RM9200
-extern int rm9200_type;
-#define ARCH_REVISON_9200_BGA (0 << 0)
-#define ARCH_REVISON_9200_PQFP (1 << 0)
-#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp())
-#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP)
+#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
+#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
+#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
#else
#define cpu_is_at91rm9200() (0)
#define cpu_is_at91rm9200_bga() (0)
@@ -101,52 +128,49 @@ extern int rm9200_type;
#endif
#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
+#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
#else
#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
#else
#define cpu_is_at91sam9g20() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
#else
#define cpu_is_at91sam9261() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9G10
-#define cpu_is_at91sam9g10() ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10)
+#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
#else
#define cpu_is_at91sam9g10() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
#else
#define cpu_is_at91sam9263() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
#else
#define cpu_is_at91sam9rl() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9G45
-#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
-#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
-#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
-#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
-#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
+#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
+#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
+#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
+#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46)
+#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11)
#else
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
@@ -156,17 +180,12 @@ extern int rm9200_type;
#endif
#ifdef CONFIG_ARCH_AT91SAM9X5
-#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
-#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
-#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
-#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
-#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
-#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
- (at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
+#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
+#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
+#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35)
+#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25)
+#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25)
#else
#define cpu_is_at91sam9x5() (0)
#define cpu_is_at91sam9g15() (0)
@@ -177,9 +196,9 @@ extern int rm9200_type;
#endif
#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
-#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
-#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
+#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9)
+#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
+#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
#else
#define cpu_is_at91cap9() (0)
#define cpu_is_at91cap9_revB() (0)
@@ -192,4 +211,4 @@ extern int rm9200_type;
*/
#define cpu_is_at32ap7000() (0)
-#endif
+#endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 0f959faf74a9..bc1e0b2e2f4f 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -15,23 +15,23 @@
#include <mach/at91_dbgu.h>
.macro addruart, rp, rv
- ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
- ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
+ ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
- strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
+ strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register
.endm
.macro waituart,rd,rx
-1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
beq 1001b
.endm
.macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
beq 1001b
.endm
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 1008b9fb5074..483478d8be6b 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -36,6 +36,20 @@
#error "Unsupported AT91 processor"
#endif
+#if !defined(CONFIG_ARCH_AT91X40)
+/*
+ * On all at91 except rm9200 and x40 have the System Controller starts
+ * at address 0xffffc000 and has a size of 16KiB.
+ *
+ * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
+ * at 0xfffff000
+ *
+ * Removes the individual definitions of AT91_BASE_SYS and
+ * replaces them with a common version at base 0xfffffc000 and size 16KiB
+ * and map the same memory space
+ */
+#define AT91_BASE_SYS 0xffffc000
+#endif
/*
* Peripheral identifiers/interrupts.
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 0b0cccc46e68..4298e7806c76 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -21,14 +21,23 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
+#include <mach/hardware.h>
+
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
-
#ifndef __ASSEMBLY__
+#ifndef CONFIG_ARCH_AT91X40
+#define __arch_ioremap at91_ioremap
+#define __arch_iounmap at91_iounmap
+#endif
+
+void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
+void at91_iounmap(volatile void __iomem *addr);
+
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index ea53f4d9b283..4159eca78945 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
new file mode 100644
index 000000000000..aa64294c7db3
--- /dev/null
+++ b/arch/arm/mach-at91/setup.c
@@ -0,0 +1,297 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/cpu.h>
+#include <mach/at91_dbgu.h>
+#include <mach/at91_pmc.h>
+
+#include "soc.h"
+#include "generic.h"
+
+struct at91_init_soc __initdata at91_boot_soc;
+
+struct at91_socinfo at91_soc_initdata;
+EXPORT_SYMBOL(at91_soc_initdata);
+
+void __init at91rm9200_set_type(int type)
+{
+ if (type == ARCH_REVISON_9200_PQFP)
+ at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
+ else
+ at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
+}
+
+void __init at91_init_irq_default(void)
+{
+ at91_init_interrupts(at91_boot_soc.default_irq_priority);
+}
+
+void __init at91_init_interrupts(unsigned int *priority)
+{
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
+
+static struct map_desc sram_desc[2] __initdata;
+
+void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
+{
+ struct map_desc *desc = &sram_desc[bank];
+
+ desc->virtual = AT91_IO_VIRT_BASE - length;
+ if (bank > 0)
+ desc->virtual -= sram_desc[bank - 1].length;
+
+ desc->pfn = __phys_to_pfn(base);
+ desc->length = length;
+ desc->type = MT_DEVICE;
+
+ pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
+ base, length, desc->virtual);
+
+ iotable_init(desc, 1);
+}
+
+static struct map_desc at91_io_desc __initdata = {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+};
+
+void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
+ return (void __iomem *)AT91_IO_P2V(p);
+
+ return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(at91_ioremap);
+
+void at91_iounmap(volatile void __iomem *addr)
+{
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
+}
+EXPORT_SYMBOL(at91_iounmap);
+
+#define AT91_DBGU0 0xfffff200
+#define AT91_DBGU1 0xffffee00
+
+static void __init soc_detect(u32 dbgu_base)
+{
+ u32 cidr, socid;
+
+ cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
+ socid = cidr & ~AT91_CIDR_VERSION;
+
+ switch (socid) {
+ case ARCH_ID_AT91CAP9: {
+#ifdef CONFIG_AT91_PMC_UNIT
+ u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
+
+ if (pmc_ver == ARCH_REVISION_CAP9_B)
+ at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
+ else if (pmc_ver == ARCH_REVISION_CAP9_C)
+ at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
+#endif
+ at91_soc_initdata.type = AT91_SOC_CAP9;
+ at91_boot_soc = at91cap9_soc;
+ break;
+ }
+
+ case ARCH_ID_AT91RM9200:
+ at91_soc_initdata.type = AT91_SOC_RM9200;
+ at91_boot_soc = at91rm9200_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9260:
+ at91_soc_initdata.type = AT91_SOC_SAM9260;
+ at91_boot_soc = at91sam9260_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9261:
+ at91_soc_initdata.type = AT91_SOC_SAM9261;
+ at91_boot_soc = at91sam9261_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9263:
+ at91_soc_initdata.type = AT91_SOC_SAM9263;
+ at91_boot_soc = at91sam9263_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9G20:
+ at91_soc_initdata.type = AT91_SOC_SAM9G20;
+ at91_boot_soc = at91sam9260_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9G45:
+ at91_soc_initdata.type = AT91_SOC_SAM9G45;
+ if (cidr == ARCH_ID_AT91SAM9G45ES)
+ at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
+ at91_boot_soc = at91sam9g45_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9RL64:
+ at91_soc_initdata.type = AT91_SOC_SAM9RL;
+ at91_boot_soc = at91sam9rl_soc;
+ break;
+
+ case ARCH_ID_AT91SAM9X5:
+ at91_soc_initdata.type = AT91_SOC_SAM9X5;
+ at91_boot_soc = at91sam9x5_soc;
+ break;
+ }
+
+ /* at91sam9g10 */
+ if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ at91_soc_initdata.type = AT91_SOC_SAM9G10;
+ at91_boot_soc = at91sam9261_soc;
+ }
+ /* at91sam9xe */
+ else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+ at91_soc_initdata.type = AT91_SOC_SAM9260;
+ at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
+ at91_boot_soc = at91sam9260_soc;
+ }
+
+ if (!at91_soc_is_detected())
+ return;
+
+ at91_soc_initdata.cidr = cidr;
+
+ /* sub version of soc */
+ at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+
+ if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
+ switch (at91_soc_initdata.exid) {
+ case ARCH_EXID_AT91SAM9M10:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
+ break;
+ case ARCH_EXID_AT91SAM9G46:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
+ break;
+ case ARCH_EXID_AT91SAM9M11:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
+ break;
+ }
+ }
+
+ if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
+ switch (at91_soc_initdata.exid) {
+ case ARCH_EXID_AT91SAM9G15:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
+ break;
+ case ARCH_EXID_AT91SAM9G35:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
+ break;
+ case ARCH_EXID_AT91SAM9X35:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
+ break;
+ case ARCH_EXID_AT91SAM9G25:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
+ break;
+ case ARCH_EXID_AT91SAM9X25:
+ at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
+ break;
+ }
+ }
+}
+
+static const char *soc_name[] = {
+ [AT91_SOC_RM9200] = "at91rm9200",
+ [AT91_SOC_CAP9] = "at91cap9",
+ [AT91_SOC_SAM9260] = "at91sam9260",
+ [AT91_SOC_SAM9261] = "at91sam9261",
+ [AT91_SOC_SAM9263] = "at91sam9263",
+ [AT91_SOC_SAM9G10] = "at91sam9g10",
+ [AT91_SOC_SAM9G20] = "at91sam9g20",
+ [AT91_SOC_SAM9G45] = "at91sam9g45",
+ [AT91_SOC_SAM9RL] = "at91sam9rl",
+ [AT91_SOC_SAM9X5] = "at91sam9x5",
+ [AT91_SOC_NONE] = "Unknown"
+};
+
+const char *at91_get_soc_type(struct at91_socinfo *c)
+{
+ return soc_name[c->type];
+}
+EXPORT_SYMBOL(at91_get_soc_type);
+
+static const char *soc_subtype_name[] = {
+ [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
+ [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
+ [AT91_SOC_CAP9_REV_B] = "at91cap9 revB",
+ [AT91_SOC_CAP9_REV_C] = "at91cap9 revC",
+ [AT91_SOC_SAM9XE] = "at91sam9xe",
+ [AT91_SOC_SAM9G45ES] = "at91sam9g45es",
+ [AT91_SOC_SAM9M10] = "at91sam9m10",
+ [AT91_SOC_SAM9G46] = "at91sam9g46",
+ [AT91_SOC_SAM9M11] = "at91sam9m11",
+ [AT91_SOC_SAM9G15] = "at91sam9g15",
+ [AT91_SOC_SAM9G35] = "at91sam9g35",
+ [AT91_SOC_SAM9X35] = "at91sam9x35",
+ [AT91_SOC_SAM9G25] = "at91sam9g25",
+ [AT91_SOC_SAM9X25] = "at91sam9x25",
+ [AT91_SOC_SUBTYPE_NONE] = "Unknown"
+};
+
+const char *at91_get_soc_subtype(struct at91_socinfo *c)
+{
+ return soc_subtype_name[c->subtype];
+}
+EXPORT_SYMBOL(at91_get_soc_subtype);
+
+void __init at91_map_io(void)
+{
+ /* Map peripherals */
+ iotable_init(&at91_io_desc, 1);
+
+ at91_soc_initdata.type = AT91_SOC_NONE;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
+
+ soc_detect(AT91_DBGU0);
+ if (!at91_soc_is_detected())
+ soc_detect(AT91_DBGU1);
+
+ if (!at91_soc_is_detected())
+ panic("AT91: Impossible to detect the SOC type");
+
+ pr_info("AT91: Detected soc type: %s\n",
+ at91_get_soc_type(&at91_soc_initdata));
+ pr_info("AT91: Detected soc subtype: %s\n",
+ at91_get_soc_subtype(&at91_soc_initdata));
+
+ if (!at91_soc_is_enabled())
+ panic("AT91: Soc not enabled");
+
+ if (at91_boot_soc.map_io)
+ at91_boot_soc.map_io();
+}
+
+void __init at91_initialize(unsigned long main_clock)
+{
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91_boot_soc.register_clocks();
+
+ at91_boot_soc.init();
+}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
new file mode 100644
index 000000000000..21ed8816e6f7
--- /dev/null
+++ b/arch/arm/mach-at91/soc.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+struct at91_init_soc {
+ unsigned int *default_irq_priority;
+ void (*map_io)(void);
+ void (*register_clocks)(void);
+ void (*init)(void);
+};
+
+extern struct at91_init_soc at91_boot_soc;
+extern struct at91_init_soc at91cap9_soc;
+extern struct at91_init_soc at91rm9200_soc;
+extern struct at91_init_soc at91sam9260_soc;
+extern struct at91_init_soc at91sam9261_soc;
+extern struct at91_init_soc at91sam9263_soc;
+extern struct at91_init_soc at91sam9g45_soc;
+extern struct at91_init_soc at91sam9rl_soc;
+extern struct at91_init_soc at91sam9x5_soc;
+
+static inline int at91_soc_is_enabled(void)
+{
+ return at91_boot_soc.init != NULL;
+}
+
+#if !defined(CONFIG_ARCH_AT91CAP9)
+#define at91cap9_soc at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91RM9200)
+#define at91rm9200_soc at91_boot_soc
+#endif
+
+#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#define at91sam9260_soc at91_boot_soc
+#endif
+
+#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#define at91sam9261_soc at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9263)
+#define at91sam9263_soc at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#define at91sam9g45_soc at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#define at91sam9rl_soc at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#define at91sam9x5_soc at91_boot_soc
+#endif
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 9f2a948e0e72..0ca00050666a 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -34,7 +34,7 @@
#include <linux/mm.h>
#include <linux/pfn.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-bcmring/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index 8bf3564fba50..ed78aabb8e9f 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -36,8 +36,6 @@
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
-#define pcibios_assign_all_busses() 1
-
/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
#if defined(__KERNEL__)
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 08e5c8759502..3e7d1496cb47 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -29,7 +29,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
#include "core.h"
@@ -170,6 +169,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = {
static void __init cns3420_init(void)
{
+ cns3xxx_l2x0_init();
+
platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
cns3xxx_ahci_init();
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index da30078a80c1..941a308e1253 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -16,6 +16,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
#include <mach/cns3xxx.h>
#include "core.h"
@@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void)
struct sys_timer cns3xxx_timer = {
.init = cns3xxx_timer_init,
};
+
+#ifdef CONFIG_CACHE_L2X0
+
+void __init cns3xxx_l2x0_init(void)
+{
+ void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+ u32 val;
+
+ if (WARN_ON(!base))
+ return;
+
+ /*
+ * Tag RAM Control register
+ *
+ * bit[10:8] - 1 cycle of write accesses latency
+ * bit[6:4] - 1 cycle of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of latency for setup, read and write accesses
+ */
+ val = readl(base + L2X0_TAG_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_TAG_LATENCY_CTRL);
+
+ /*
+ * Data RAM Control register
+ *
+ * bit[10:8] - 1 cycles of write accesses latency
+ * bit[6:4] - 1 cycles of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of latency for setup, read and write accesses
+ */
+ val = readl(base + L2X0_DATA_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_DATA_LATENCY_CTRL);
+
+ /* 32 KiB, 8-way, parity disable */
+ l2x0_init(base, 0x00540000, 0xfe000fff);
+}
+
+#endif /* CONFIG_CACHE_L2X0 */
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index ffeb3a8b73ba..fcd225343c61 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -13,6 +13,12 @@
extern struct sys_timer cns3xxx_timer;
+#ifdef CONFIG_CACHE_L2X0
+void __init cns3xxx_l2x0_init(void);
+#else
+static inline void cns3xxx_l2x0_init(void) {}
+#endif /* CONFIG_CACHE_L2X0 */
+
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index 6bd83ed90afe..d87bfc397d39 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -8,7 +8,6 @@
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h
deleted file mode 100644
index 57e09836f9d7..000000000000
--- a/arch/arm/mach-cns3xxx/include/mach/hardware.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file contains the hardware definitions of the Cavium Networks boards.
- *
- * Copyright 2003 ARM Limited.
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
-#define pcibios_assign_all_busses() 1
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
index 6eae7f764d1d..c2588cc991d1 100644
--- a/arch/arm/mach-cns3xxx/include/mach/pm.h
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -11,7 +11,7 @@
#ifndef __CNS3XXX_PM_H
#define __CNS3XXX_PM_H
-#include <asm/atomic.h>
+#include <linux/atomic.h>
void cns3xxx_pwr_clk_en(unsigned int block);
void cns3xxx_pwr_clk_dis(unsigned int block);
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
index 58bb03ae3cf4..4f16c9b79f78 100644
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
@@ -13,7 +13,6 @@
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/hardware.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
index de8ead9b91f7..a91b6058ab4f 100644
--- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
@@ -8,7 +8,6 @@
*/
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 78defd71a829..0f8fca48a5ed 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
return &cns3xxx_pcie[root->domain];
}
-static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
{
return sysdata_to_cnspci(dev->sysdata);
}
@@ -172,7 +172,7 @@ static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
}
-static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
int irq = cnspci->irqs[slot];
@@ -369,6 +369,9 @@ static int __init cns3xxx_pcie_init(void)
{
int i;
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 5e579552aa54..0c04678615ce 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -10,7 +10,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <mach/system.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 29671ef07152..008d51407cd7 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = {
},
};
+#ifdef CONFIG_MTD
+static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ size_t retlen;
+
+ if (!strcmp(mtd->name, "MAC-Address")) {
+ mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
+ if (retlen == ETH_ALEN)
+ pr_info("Read MAC addr from SPI Flash: %pM\n",
+ mac_addr);
+ }
+}
+
+static struct mtd_notifier da850evm_spi_notifier = {
+ .add = da850_evm_m25p80_notify_add,
+};
+
+static void da850_evm_setup_mac_addr(void)
+{
+ register_mtd_user(&da850evm_spi_notifier);
+}
+#else
+static void da850_evm_setup_mac_addr(void) { }
+#endif
+
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "bootloaders + env",
@@ -1117,6 +1143,8 @@ static __init int da850_evm_init_cpufreq(void)
static __init int da850_evm_init_cpufreq(void) { return 0; }
#endif
+#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
+
static __init void da850_evm_init(void)
{
int ret;
@@ -1237,6 +1265,13 @@ static __init void da850_evm_init(void)
if (ret)
pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
ret);
+
+ ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+ if (ret)
+ pr_warning("da850_evm_init: sata registration failed: %d\n",
+ ret);
+
+ da850_evm_setup_mac_addr();
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index ae653194b645..00861139101d 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
- PSC_STATE_ENABLE);
+ true, clk->flags);
}
static void __clk_disable(struct clk *clk)
@@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk)
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
(clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
- (clk->flags & PSC_SWRSTDISABLE) ?
- PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+ false, clk->flags);
if (clk->parent)
__clk_disable(clk->parent);
}
@@ -239,8 +238,7 @@ static int __init clk_disable_unused(void)
pr_debug("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
- (ck->flags & PSC_SWRSTDISABLE) ?
- PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+ false, ck->flags);
}
spin_unlock_irq(&clockfw_lock);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 50b2482e0ba2..a705f367a84d 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -111,6 +111,7 @@ struct clk {
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */
+#define PSC_FORCE BIT(7) /* Force module state transtition */
#define CLK(dev, con, ck) \
{ \
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 133aac405853..935dbed5c541 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -58,6 +58,7 @@ static struct pll_data pll0_data = {
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DA850_REF_FREQ,
+ .set_rate = davinci_simple_set_rate,
};
static struct clk pll0_clk = {
@@ -373,6 +374,14 @@ static struct clk spi1_clk = {
.flags = DA850_CLK_ASYNC3,
};
+static struct clk sata_clk = {
+ .name = "sata",
+ .parent = &pll0_sysclk2,
+ .lpsc = DA850_LPSC1_SATA,
+ .gpsc = 1,
+ .flags = PSC_FORCE,
+};
+
static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
@@ -419,6 +428,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
+ CLK("ahci", NULL, &sata_clk),
CLK(NULL, NULL, NULL),
};
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fc4e98ea7543..2f7e719636f1 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -14,6 +14,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
#include <mach/cputype.h>
#include <mach/common.h>
@@ -33,6 +35,7 @@
#define DA8XX_SPI0_BASE 0x01c41000
#define DA830_SPI1_BASE 0x01e12000
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA850_SATA_BASE 0x01e18000
#define DA850_MMCSD1_BASE 0x01e1b000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
@@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
return platform_device_register(&da8xx_spi_device[instance]);
}
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static struct resource da850_sata_resources[] = {
+ {
+ .start = DA850_SATA_BASE,
+ .end = DA850_SATA_BASE + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA850_SATAINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG 0x178
+
+#define SATA_PHY_MPY(x) ((x) << 0)
+#define SATA_PHY_LOS(x) ((x) << 6)
+#define SATA_PHY_RXCDR(x) ((x) << 10)
+#define SATA_PHY_RXEQ(x) ((x) << 13)
+#define SATA_PHY_TXSWING(x) ((x) << 19)
+#define SATA_PHY_ENPLL(x) ((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+ KHZ_TO_HZ(300000),
+ KHZ_TO_HZ(250000),
+ 0, /* Reserved */
+ KHZ_TO_HZ(187500),
+ KHZ_TO_HZ(150000),
+ KHZ_TO_HZ(125000),
+ KHZ_TO_HZ(120000),
+ KHZ_TO_HZ(100000),
+ KHZ_TO_HZ(75000),
+ KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+ int i, ret;
+ unsigned int val;
+
+ da850_sata_clk = clk_get(dev, NULL);
+ if (IS_ERR(da850_sata_clk))
+ return PTR_ERR(da850_sata_clk);
+
+ ret = clk_enable(da850_sata_clk);
+ if (ret)
+ goto err0;
+
+ /* Enable SATA clock receiver */
+ val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+ val &= ~BIT(0);
+ __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+ /* Get the multiplier needed for 1.5GHz PLL output */
+ for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+ if (da850_sata_xtal[i] == da850_sata_refclkpn)
+ break;
+
+ if (i == ARRAY_SIZE(da850_sata_xtal)) {
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ val = SATA_PHY_MPY(i + 1) |
+ SATA_PHY_LOS(1) |
+ SATA_PHY_RXCDR(4) |
+ SATA_PHY_RXEQ(1) |
+ SATA_PHY_TXSWING(3) |
+ SATA_PHY_ENPLL(1);
+
+ __raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+ return 0;
+
+err1:
+ clk_disable(da850_sata_clk);
+err0:
+ clk_put(da850_sata_clk);
+ return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+ clk_disable(da850_sata_clk);
+ clk_put(da850_sata_clk);
+}
+
+static struct ahci_platform_data da850_sata_pdata = {
+ .init = da850_sata_init,
+ .exit = da850_sata_exit,
+};
+
+static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device da850_sata_device = {
+ .name = "ahci",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_sata_pdata,
+ .dma_mask = &da850_sata_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(da850_sata_resources),
+ .resource = da850_sata_resources,
+};
+
+int __init da850_register_sata(unsigned long refclkpn)
+{
+ da850_sata_refclkpn = refclkpn;
+ if (!da850_sata_refclkpn)
+ return -EINVAL;
+
+ return platform_device_register(&da850_sata_device);
+}
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
deleted file mode 100644
index 14a504887189..000000000000
--- a/arch/arm/mach-davinci/include/mach/clkdev.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-struct clk;
-
-static inline int __clk_get(struct clk *clk)
-{
- return 1;
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index ad64da713fc8..eaca7d8b9d68 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -57,6 +57,7 @@ extern unsigned int da850_max_speed;
#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
#define DA8XX_DEEPSLEEP_REG 0x8
+#define DA8XX_PWRDN_REG 0x18
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
@@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk);
int da8xx_register_cpuidle(void);
void __iomem * __init da8xx_get_mem_ctlr(void);
int da850_register_pm(struct platform_device *pdev);
+int __init da850_register_sata(unsigned long refclkpn);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 1110fdd77ba4..fa59c097223d 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -243,13 +243,14 @@
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
-#define MDSTAT_STATE_MASK 0x1f
+#define MDSTAT_STATE_MASK 0x3f
+#define MDCTL_FORCE BIT(31)
#ifndef __ASSEMBLER__
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, u32 next_state);
+ unsigned int id, bool enable, u32 flags);
#endif
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index a41580400701..1fb6bdff38c1 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,6 +25,8 @@
#include <mach/cputype.h>
#include <mach/psc.h>
+#include "clock.h"
+
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
@@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, u32 next_state)
+ unsigned int id, bool enable, u32 flags)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ u32 next_state = PSC_STATE_ENABLE;
if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
@@ -62,9 +65,18 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
+ if (!enable) {
+ if (flags & PSC_SWRSTDISABLE)
+ next_state = PSC_STATE_SWRSTDISABLE;
+ else
+ next_state = PSC_STATE_DISABLE;
+ }
+
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
+ if (flags & PSC_FORCE)
+ mdctl |= MDCTL_FORCE;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
pdstat = __raw_readl(psc_base + PDSTAT);
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index fb5e72b532b0..5f1e045a3ad1 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -217,7 +217,11 @@ ddr2clk_stop_done:
ENDPROC(davinci_ddr_psc_config)
CACHE_FLUSH:
- .word arm926_flush_kern_cache_all
+#ifdef CONFIG_CPU_V6
+ .word v6_flush_kern_cache_all
+#else
+ .word arm926_flush_kern_cache_all
+#endif
ENTRY(davinci_cpu_suspend_sz)
.word . - davinci_cpu_suspend
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
index 32b0826e7873..f1368b9a8ece 100644
--- a/arch/arm/mach-dove/include/mach/hardware.h
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -11,13 +11,6 @@
#include "dove.h"
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
-
-
/* Macros below are required for compatibility with PXA AC'97 driver. */
#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
DOVE_SB_REGS_VIRT_BASE)))
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 502d1ca2f4b7..aa2b3a09a51d 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
+#include <video/vga.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
@@ -192,7 +193,7 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
return bus;
}
-static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus->number);
@@ -228,6 +229,8 @@ static void __init add_pcie_port(int index, unsigned long base)
void __init dove_pcie_init(int init_port0, int init_port1)
{
+ vga_base = DOVE_PCIE0_MEM_PHYS_BASE;
+
if (init_port0)
add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
deleted file mode 100644
index 50cb991eadeb..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/clkdev.h
- */
-
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 5a3ce024b593..4df842897eae 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -8,8 +8,6 @@
#include <mach/ep93xx-regs.h>
#include <mach/platform.h>
-#define pcibios_assign_all_busses() 0
-
/*
* The EP93xx has two external crystal oscillators. To generate the
* required high-frequency clocks, the processor uses two phase-locked-
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 0eabec62cd9d..f1397a13e76b 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -6,7 +6,7 @@
* TS72xx memory map:
*
* virt phys size
- * febff000 22000000 4K model number register
+ * febff000 22000000 4K model number register (bits 0-2)
* febfe000 22400000 4K options register
* febfd000 22800000 4K options register #2
* febf9000 10800000 4K TS-5620 RTC index register
@@ -20,6 +20,9 @@
#define TS72XX_MODEL_TS7200 0x00
#define TS72XX_MODEL_TS7250 0x01
#define TS72XX_MODEL_TS7260 0x02
+#define TS72XX_MODEL_TS7300 0x03
+#define TS72XX_MODEL_TS7400 0x04
+#define TS72XX_MODEL_MASK 0x07
#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
@@ -51,19 +54,34 @@
#ifndef __ASSEMBLY__
+static inline int ts72xx_model(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
static inline int board_is_ts7200(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+ return ts72xx_model() == TS72XX_MODEL_TS7200;
}
static inline int board_is_ts7250(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+ return ts72xx_model() == TS72XX_MODEL_TS7250;
}
static inline int board_is_ts7260(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+ return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7400;
}
static inline int is_max197_installed(void)
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index ae433a052df6..0c77ab99fa16 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -16,7 +16,8 @@ config CPU_EXYNOS4210
Enable EXYNOS4210 CPU support
config EXYNOS4_MCT
- bool "Kernel timer support by MCT"
+ bool
+ default y
help
Use MCT (Multi Core Timer) as kernel timers
@@ -25,6 +26,11 @@ config EXYNOS4_DEV_AHCI
help
Compile in platform device definitions for AHCI
+config EXYNOS4_SETUP_FIMD0
+ bool
+ help
+ Common setup code for FIMD0.
+
config EXYNOS4_DEV_PD
bool
help
@@ -35,6 +41,11 @@ config EXYNOS4_DEV_SYSMMU
help
Common setup code for SYSTEM MMU in EXYNOS4
+config EXYNOS4_DEV_DWMCI
+ bool
+ help
+ Compile in platform device definitions for DWMCI
+
config EXYNOS4_SETUP_I2C1
bool
help
@@ -103,6 +114,7 @@ menu "EXYNOS4 Machines"
config MACH_SMDKC210
bool "SMDKC210"
select CPU_EXYNOS4210
+ select S5P_DEV_FIMD0
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
@@ -114,6 +126,7 @@ config MACH_SMDKC210
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_SDHCI
help
@@ -122,6 +135,7 @@ config MACH_SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
+ select S5P_DEV_FIMD0
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
@@ -130,10 +144,12 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
+ select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
@@ -157,13 +173,22 @@ config MACH_ARMLEX4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
+ select S5P_GPIO_INT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_MFC
select S5P_DEV_ONENAND
+ select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
help
@@ -180,13 +205,16 @@ config MACH_NURI
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
+ select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_ADC
help
Machine support for Samsung Mobile NURI Board.
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 1366995d8c2c..b7fe1d7b0b1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,18 +13,13 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-ifeq ($(CONFIG_EXYNOS4_MCT),y)
-obj-y += mct.o
-else
-obj-y += time.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-endif
+obj-$(CONFIG_EXYNOS4_MCT) += mct.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
@@ -42,8 +37,10 @@ obj-y += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
+obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 66494f28bbef..1561b036a9bf 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 21),
}, {
.name = "ac97",
- .id = -1,
+ .devname = "samsung-ac97",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 27),
}, {
@@ -528,6 +528,11 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 0),
}, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
.name = "i2c",
.devname = "s3c2440-i2c.0",
.parent = &clk_aclk_100.clk,
@@ -731,6 +736,52 @@ static struct clksrc_sources clkset_mout_g2d = {
.nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
};
+static struct clk *clkset_mout_mfc0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc0 = {
+ .sources = clkset_mout_mfc0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk clk_mout_mfc0 = {
+ .clk = {
+ .name = "mout_mfc0",
+ },
+ .sources = &clkset_mout_mfc0,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc1 = {
+ .sources = clkset_mout_mfc1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk clk_mout_mfc1 = {
+ .clk = {
+ .name = "mout_mfc1",
+ },
+ .sources = &clkset_mout_mfc1,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc_list[] = {
+ [0] = &clk_mout_mfc0.clk,
+ [1] = &clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc = {
+ .sources = clkset_mout_mfc_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
+};
+
static struct clksrc_clk clk_dout_mmc0 = {
.clk = {
.name = "dout_mmc0",
@@ -974,6 +1025,14 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
}, {
.clk = {
+ .name = "sclk_mfc",
+ .devname = "s5p-mfc",
+ },
+ .sources = &clkset_mout_mfc,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.0",
.parent = &clk_dout_mmc0.clk,
@@ -1049,6 +1108,8 @@ static struct clksrc_clk *sysclks[] = {
&clk_dout_mmc2,
&clk_dout_mmc3,
&clk_dout_mmc4,
+ &clk_mout_mfc0,
+ &clk_mout_mfc1,
};
static int xtal_rate;
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index bfd621460abf..746d6fc6d397 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -16,16 +16,21 @@
#include <asm/proc-fns.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
#include <plat/cpu.h>
#include <plat/clock.h>
+#include <plat/devs.h>
#include <plat/exynos4.h>
+#include <plat/adc-core.h>
#include <plat/sdhci.h>
-#include <plat/devs.h>
+#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
+#include <plat/reset.h>
#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
@@ -103,7 +108,17 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
- }
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
};
static void exynos4_idle(void)
@@ -114,6 +129,11 @@ static void exynos4_idle(void)
local_irq_enable();
}
+static void exynos4_sw_reset(void)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
/*
* exynos4_map_io
*
@@ -129,6 +149,8 @@ void __init exynos4_map_io(void)
exynos4_default_sdhci2();
exynos4_default_sdhci3();
+ s3c_adc_setname("samsung-adc-v3");
+
s3c_fimc_setname(0, "exynos4-fimc");
s3c_fimc_setname(1, "exynos4-fimc");
s3c_fimc_setname(2, "exynos4-fimc");
@@ -138,6 +160,8 @@ void __init exynos4_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
}
void __init exynos4_init_clocks(int xtal)
@@ -150,22 +174,23 @@ void __init exynos4_init_clocks(int xtal)
exynos4_setup_clocks();
}
+static void exynos4_gic_irq_eoi(struct irq_data *d)
+{
+ struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+ gic_data->cpu_base = S5P_VA_GIC_CPU +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+}
+
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
- /*
- * From SPI(0) to SPI(39) and SPI(51), SPI(53) are
- * connected to the interrupt combiner. These irqs
- * should be initialized to support cascade interrupt.
- */
- if ((irq >= 40) && !(irq == 51) && !(irq == 53))
- continue;
-
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -222,5 +247,8 @@ int __init exynos4_init(void)
/* set idle function */
pm_idle = exynos4_idle;
+ /* set sw_reset function */
+ s5p_reset_hook = exynos4_sw_reset;
+
return sysdev_register(&exynos4_sysdev);
}
diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c
index 983069a53239..5a9f9c2e53bf 100644
--- a/arch/arm/mach-exynos4/dev-audio.c
+++ b/arch/arm/mach-exynos4/dev-audio.c
@@ -21,6 +21,7 @@
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
+#include <mach/regs-audss.h>
static const char *rclksrc[] = {
[0] = "busclk",
@@ -55,6 +56,7 @@ static struct s3c_audio_pdata i2sv5_pdata = {
.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
| QUIRK_NEED_RSTCLR,
.src_clk = rclksrc,
+ .idma_addr = EXYNOS4_AUDSS_INT_MEM,
},
},
};
diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos4/dev-dwmci.c
new file mode 100644
index 000000000000..b025db4bf602
--- /dev/null
+++ b/arch/arm/mach-exynos4/dev-dwmci.c
@@ -0,0 +1,82 @@
+/*
+ * linux/arch/arm/mach-exynos4/dev-dwmci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Platform device for Synopsys DesignWare Mobile Storage IP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/dw_mmc.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+
+static int exynos4_dwmci_get_bus_wd(u32 slot_id)
+{
+ return 4;
+}
+
+static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
+{
+ return 0;
+}
+
+static struct resource exynos4_dwmci_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_DWMCI,
+ .end = EXYNOS4_PA_DWMCI + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DWMCI,
+ .end = IRQ_DWMCI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct dw_mci_board exynos4_dwci_pdata = {
+ .num_slots = 1,
+ .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+ .bus_hz = 80 * 1000 * 1000,
+ .detect_delay_ms = 200,
+ .init = exynos4_dwmci_init,
+ .get_bus_wd = exynos4_dwmci_get_bus_wd,
+};
+
+static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_dwmci = {
+ .name = "dw_mmc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_dwmci_resource),
+ .resource = exynos4_dwmci_resource,
+ .dev = {
+ .dma_mask = &exynos4_dwmci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_dwci_pdata,
+ },
+};
+
+void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
+{
+ struct dw_mci_board *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
+ &exynos4_device_dwmci);
+
+ if (!npd->init)
+ npd->init = exynos4_dwmci_init;
+ if (!npd->get_bus_wd)
+ npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
+}
diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c
index 2b5909e2ccd3..7490789784c9 100644
--- a/arch/arm/mach-exynos4/hotplug.c
+++ b/arch/arm/mach-exynos4/hotplug.c
@@ -13,9 +13,12 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <mach/regs-pmu.h>
+
extern volatile int pen_release;
static inline void cpu_enter_lowpower(void)
@@ -58,12 +61,12 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
- /*
- * there is no power-control hardware on this platform, so all
- * we can do is put the core into WFI; this is safe as the calling
- * code will have already disabled interrupts
- */
for (;;) {
+
+ /* make cpu1 to be turned off at next WFI command */
+ if (cpu == 1)
+ __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+
/*
* here's the WFI
*/
diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos4/include/mach/dwmci.h
new file mode 100644
index 000000000000..7ce657459cc0
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/dwmci.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Synopsys DesignWare Mobile Storage for EXYNOS4210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_DWMCI_H
+#define __ASM_ARM_ARCH_DWMCI_H __FILE__
+
+#include <linux/mmc/dw_mmc.h>
+
+extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
+
+#endif /* __ASM_ARM_ARCH_DWMCI_H */
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d8f38c2e5654..d7a1e281ce7a 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -10,6 +10,7 @@
*/
#include <mach/hardware.h>
+#include <mach/map.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
@@ -18,6 +19,10 @@
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
+ mrc p15, 0, \tmp, c0, c0, 5
+ and \tmp, \tmp, #3
+ cmp \tmp, #1
+ addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -75,10 +80,4 @@
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
.endm
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index 5d037301d21a..f8952f8f3757 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,40 +19,104 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
-#define IRQ_LOCALTIMER IRQ_PPI(13)
-
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
-#define IRQ_MCT1 IRQ_SPI(35)
-
-#define IRQ_EINT0 IRQ_SPI(40)
-#define IRQ_EINT1 IRQ_SPI(41)
-#define IRQ_EINT2 IRQ_SPI(42)
-#define IRQ_EINT3 IRQ_SPI(43)
-#define IRQ_USB_HSOTG IRQ_SPI(44)
-#define IRQ_USB_HOST IRQ_SPI(45)
-#define IRQ_MODEM_IF IRQ_SPI(46)
-#define IRQ_ROTATOR IRQ_SPI(47)
-#define IRQ_JPEG IRQ_SPI(48)
-#define IRQ_2D IRQ_SPI(49)
-#define IRQ_PCIE IRQ_SPI(50)
-#define IRQ_MCT0 IRQ_SPI(51)
-#define IRQ_MFC IRQ_SPI(52)
-#define IRQ_AUDIO_SS IRQ_SPI(54)
-#define IRQ_AC97 IRQ_SPI(55)
-#define IRQ_SPDIF IRQ_SPI(56)
-#define IRQ_KEYPAD IRQ_SPI(57)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58)
-#define IRQ_SLIMBUS IRQ_SPI(59)
-#define IRQ_PMU IRQ_SPI(60)
-#define IRQ_TSI IRQ_SPI(61)
-#define IRQ_SATA IRQ_SPI(62)
-#define IRQ_GPS IRQ_SPI(63)
+#define IRQ_EINT0 IRQ_SPI(16)
+#define IRQ_EINT1 IRQ_SPI(17)
+#define IRQ_EINT2 IRQ_SPI(18)
+#define IRQ_EINT3 IRQ_SPI(19)
+#define IRQ_EINT4 IRQ_SPI(20)
+#define IRQ_EINT5 IRQ_SPI(21)
+#define IRQ_EINT6 IRQ_SPI(22)
+#define IRQ_EINT7 IRQ_SPI(23)
+#define IRQ_EINT8 IRQ_SPI(24)
+#define IRQ_EINT9 IRQ_SPI(25)
+#define IRQ_EINT10 IRQ_SPI(26)
+#define IRQ_EINT11 IRQ_SPI(27)
+#define IRQ_EINT12 IRQ_SPI(28)
+#define IRQ_EINT13 IRQ_SPI(29)
+#define IRQ_EINT14 IRQ_SPI(30)
+#define IRQ_EINT15 IRQ_SPI(31)
+#define IRQ_EINT16_31 IRQ_SPI(32)
+
+#define IRQ_PDMA0 IRQ_SPI(35)
+#define IRQ_PDMA1 IRQ_SPI(36)
+#define IRQ_TIMER0_VIC IRQ_SPI(37)
+#define IRQ_TIMER1_VIC IRQ_SPI(38)
+#define IRQ_TIMER2_VIC IRQ_SPI(39)
+#define IRQ_TIMER3_VIC IRQ_SPI(40)
+#define IRQ_TIMER4_VIC IRQ_SPI(41)
+#define IRQ_MCT_L0 IRQ_SPI(42)
+#define IRQ_WDT IRQ_SPI(43)
+#define IRQ_RTC_ALARM IRQ_SPI(44)
+#define IRQ_RTC_TIC IRQ_SPI(45)
+#define IRQ_GPIO_XB IRQ_SPI(46)
+#define IRQ_GPIO_XA IRQ_SPI(47)
+#define IRQ_MCT_L1 IRQ_SPI(48)
+
+#define IRQ_UART0 IRQ_SPI(52)
+#define IRQ_UART1 IRQ_SPI(53)
+#define IRQ_UART2 IRQ_SPI(54)
+#define IRQ_UART3 IRQ_SPI(55)
+#define IRQ_UART4 IRQ_SPI(56)
+#define IRQ_MCT_G0 IRQ_SPI(57)
+#define IRQ_IIC IRQ_SPI(58)
+#define IRQ_IIC1 IRQ_SPI(59)
+#define IRQ_IIC2 IRQ_SPI(60)
+#define IRQ_IIC3 IRQ_SPI(61)
+#define IRQ_IIC4 IRQ_SPI(62)
+#define IRQ_IIC5 IRQ_SPI(63)
+#define IRQ_IIC6 IRQ_SPI(64)
+#define IRQ_IIC7 IRQ_SPI(65)
+
+#define IRQ_USB_HOST IRQ_SPI(70)
+#define IRQ_USB_HSOTG IRQ_SPI(71)
+#define IRQ_MODEM_IF IRQ_SPI(72)
+#define IRQ_HSMMC0 IRQ_SPI(73)
+#define IRQ_HSMMC1 IRQ_SPI(74)
+#define IRQ_HSMMC2 IRQ_SPI(75)
+#define IRQ_HSMMC3 IRQ_SPI(76)
+#define IRQ_DWMCI IRQ_SPI(77)
+
+#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
+
+#define IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define IRQ_ROTATOR IRQ_SPI(83)
+#define IRQ_FIMC0 IRQ_SPI(84)
+#define IRQ_FIMC1 IRQ_SPI(85)
+#define IRQ_FIMC2 IRQ_SPI(86)
+#define IRQ_FIMC3 IRQ_SPI(87)
+#define IRQ_JPEG IRQ_SPI(88)
+#define IRQ_2D IRQ_SPI(89)
+#define IRQ_PCIE IRQ_SPI(90)
+
+#define IRQ_MFC IRQ_SPI(94)
+
+#define IRQ_AUDIO_SS IRQ_SPI(96)
+#define IRQ_I2S0 IRQ_SPI(97)
+#define IRQ_I2S1 IRQ_SPI(98)
+#define IRQ_I2S2 IRQ_SPI(99)
+#define IRQ_AC97 IRQ_SPI(100)
+
+#define IRQ_SPDIF IRQ_SPI(104)
+#define IRQ_ADC0 IRQ_SPI(105)
+#define IRQ_PEN0 IRQ_SPI(106)
+#define IRQ_ADC1 IRQ_SPI(107)
+#define IRQ_PEN1 IRQ_SPI(108)
+#define IRQ_KEYPAD IRQ_SPI(109)
+#define IRQ_PMU IRQ_SPI(110)
+#define IRQ_GPS IRQ_SPI(111)
+#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define IRQ_SLIMBUS IRQ_SPI(113)
+
+#define IRQ_TSI IRQ_SPI(115)
+#define IRQ_SATA IRQ_SPI(116)
#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
@@ -73,75 +137,14 @@
#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-#define IRQ_PDMA0 COMBINER_IRQ(21, 0)
-#define IRQ_PDMA1 COMBINER_IRQ(21, 1)
-
-#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0)
-#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1)
-#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2)
-#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
-#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
-
-#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0)
-#define IRQ_RTC_TIC COMBINER_IRQ(23, 1)
-
-#define IRQ_GPIO_XB COMBINER_IRQ(24, 0)
-#define IRQ_GPIO_XA COMBINER_IRQ(24, 1)
-
-#define IRQ_UART0 COMBINER_IRQ(26, 0)
-#define IRQ_UART1 COMBINER_IRQ(26, 1)
-#define IRQ_UART2 COMBINER_IRQ(26, 2)
-#define IRQ_UART3 COMBINER_IRQ(26, 3)
-#define IRQ_UART4 COMBINER_IRQ(26, 4)
-
-#define IRQ_IIC COMBINER_IRQ(27, 0)
-#define IRQ_IIC1 COMBINER_IRQ(27, 1)
-#define IRQ_IIC2 COMBINER_IRQ(27, 2)
-#define IRQ_IIC3 COMBINER_IRQ(27, 3)
-#define IRQ_IIC4 COMBINER_IRQ(27, 4)
-#define IRQ_IIC5 COMBINER_IRQ(27, 5)
-#define IRQ_IIC6 COMBINER_IRQ(27, 6)
-#define IRQ_IIC7 COMBINER_IRQ(27, 7)
-
-#define IRQ_HSMMC0 COMBINER_IRQ(29, 0)
-#define IRQ_HSMMC1 COMBINER_IRQ(29, 1)
-#define IRQ_HSMMC2 COMBINER_IRQ(29, 2)
-#define IRQ_HSMMC3 COMBINER_IRQ(29, 3)
-
-#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0)
-#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1)
-
-#define IRQ_FIMC0 COMBINER_IRQ(32, 0)
-#define IRQ_FIMC1 COMBINER_IRQ(32, 1)
-#define IRQ_FIMC2 COMBINER_IRQ(33, 0)
-#define IRQ_FIMC3 COMBINER_IRQ(33, 1)
-
-#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0)
-
-#define IRQ_MCT_L1 COMBINER_IRQ(35, 3)
-
-#define IRQ_EINT4 COMBINER_IRQ(37, 0)
-#define IRQ_EINT5 COMBINER_IRQ(37, 1)
-#define IRQ_EINT6 COMBINER_IRQ(37, 2)
-#define IRQ_EINT7 COMBINER_IRQ(37, 3)
-#define IRQ_EINT8 COMBINER_IRQ(38, 0)
-
-#define IRQ_EINT9 COMBINER_IRQ(38, 1)
-#define IRQ_EINT10 COMBINER_IRQ(38, 2)
-#define IRQ_EINT11 COMBINER_IRQ(38, 3)
-#define IRQ_EINT12 COMBINER_IRQ(38, 4)
-#define IRQ_EINT13 COMBINER_IRQ(38, 5)
-#define IRQ_EINT14 COMBINER_IRQ(38, 6)
-#define IRQ_EINT15 COMBINER_IRQ(38, 7)
-
-#define IRQ_EINT16_31 COMBINER_IRQ(39, 0)
-
-#define IRQ_MCT_L0 COMBINER_IRQ(51, 0)
+#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-#define IRQ_WDT COMBINER_IRQ(53, 0)
-#define IRQ_MCT_G0 COMBINER_IRQ(53, 4)
+#define MAX_COMBINER_NR 16
-#define MAX_COMBINER_NR 54
+#define IRQ_ADC IRQ_ADC0
+#define IRQ_TC IRQ_PEN0
#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
@@ -155,6 +158,6 @@
#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_GPIO_END)
+#define NR_IRQS (IRQ_GPIO_END + 64)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 0009e77a05fc..d32296dc65e2 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -57,12 +57,14 @@
#define EXYNOS4_PA_DMC0 0x10400000
-#define EXYNOS4_PA_COMBINER 0x10448000
+#define EXYNOS4_PA_COMBINER 0x10440000
+
+#define EXYNOS4_PA_GIC_CPU 0x10480000
+#define EXYNOS4_PA_GIC_DIST 0x10490000
+#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
-#define EXYNOS4_PA_GIC_CPU 0x10500100
#define EXYNOS4_PA_TWD 0x10500600
-#define EXYNOS4_PA_GIC_DIST 0x10501000
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_MDMA 0x10810000
@@ -93,7 +95,10 @@
#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
+#define EXYNOS4_PA_FIMD0 0x11C00000
+
#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define EXYNOS4_PA_DWMCI 0x12550000
#define EXYNOS4_PA_SATA 0x12560000
#define EXYNOS4_PA_SATAPHY 0x125D0000
@@ -103,11 +108,15 @@
#define EXYNOS4_PA_EHCI 0x12580000
#define EXYNOS4_PA_HSPHY 0x125B0000
+#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+#define EXYNOS4_PA_ADC 0x13910000
+#define EXYNOS4_PA_ADC1 0x13911000
+
#define EXYNOS4_PA_AC97 0x139A0000
#define EXYNOS4_PA_SPDIF 0x139B0000
@@ -130,6 +139,8 @@
#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
+#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
@@ -140,10 +151,12 @@
#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
+#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
#define S5P_PA_SROMC EXYNOS4_PA_SROMC
+#define S5P_PA_MFC EXYNOS4_PA_MFC
#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h
index f26e46bc06ca..1df3b81f96e8 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos4/include/mach/pm-core.h
@@ -47,3 +47,13 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
{
/* nothing here yet */
}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_saved_gpios(void)
+{
+ /* nothing here yet */
+}
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h
new file mode 100644
index 000000000000..a952904b010e
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/pmu.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H __FILE__
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos4/include/mach/regs-audss.h
new file mode 100644
index 000000000000..ca5a8b64218a
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/regs-audss.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-exynos4/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com
+ *
+ * Exynos4 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index 6e311c1157f5..d493fdb422ff 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -25,6 +25,9 @@
#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
+
#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
@@ -33,7 +36,9 @@
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
+#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
@@ -61,6 +66,7 @@
#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
+#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
@@ -120,6 +126,12 @@
#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
+#define S5P_EPLLCON0_ENABLE_SHIFT (31)
+#define S5P_EPLLCON0_LOCKED_SHIFT (29)
+
+#define S5P_VPLLCON0_ENABLE_SHIFT (31)
+#define S5P_VPLLCON0_LOCKED_SHIFT (29)
+
#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index a9643371f8e7..cdf9b47c303c 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -29,6 +29,8 @@
#define S5P_USE_STANDBY_WFE1 (1 << 25)
#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
+#define S5P_SWRESET S5P_PMUREG(0x0400)
+
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
@@ -158,6 +160,7 @@
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
+#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_INT_LOCAL_PWR_EN 0x7
#define S5P_CHECK_SLEEP 0x00000BAD
diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c
index 9d87d2ac7f68..badb8c66fc9b 100644
--- a/arch/arm/mach-exynos4/irq-eint.c
+++ b/arch/arm/mach-exynos4/irq-eint.c
@@ -23,6 +23,8 @@
#include <mach/regs-gpio.h>
+#include <asm/mach/irq.h>
+
static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
@@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start)
static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
exynos4_irq_demux_eint(IRQ_EINT(16));
exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
}
static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
@@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
u32 *irq_data = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
@@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
generic_handle_irq(*irq_data);
chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
}
int __init exynos4_init_irq_eint(void)
diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c
deleted file mode 100644
index 6bf3d0ab9627..000000000000
--- a/arch/arm/mach-exynos4/localtimer.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-exynos4/localtimer.c
- *
- * Cloned from linux/arch/arm/mach-realview/localtimer.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- evt->irq = IRQ_LOCALTIMER;
- twd_timer_setup(evt);
- return 0;
-}
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 642702bb5b12..43be71b799cb 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -13,10 +13,15 @@
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/i2c-gpio.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/power/max8903_charger.h>
+#include <linux/power/max17042_battery.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
@@ -26,6 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <plat/adc.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
@@ -35,6 +41,8 @@
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
+#include <plat/mfc.h>
+#include <plat/pd.h>
#include <mach/map.h>
@@ -54,6 +62,7 @@
enum fixed_regulator_id {
FIXED_REG_ID_MMC = 0,
+ FIXED_REG_ID_MAX8903,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -344,10 +353,730 @@ static void __init nuri_tsp_init(void)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
}
+static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
+ REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
+ REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
+ REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+ REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
+ REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
+ REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
+};
+static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
+ REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
+ REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
+ REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
+ REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
+ REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
+ REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
+ REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
+ REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
+};
+
+static struct regulator_consumer_supply __initdata max8997_charger_[] = {
+ REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
+};
+static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
+ REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
+};
+
+static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
+ REGULATOR_SUPPLY("gps_clk", "bcm4751"),
+ REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
+ REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VADC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
+ .consumer_supplies = max8997_ldo1_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VUSB_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
+ .consumer_supplies = max8997_ldo3_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
+ .consumer_supplies = max8997_ldo4_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo5_data = {
+ .constraints = {
+ .name = "VHSIC_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
+ .consumer_supplies = max8997_ldo5_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VCC_1.8V_PDA",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
+ .consumer_supplies = max8997_ldo7_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VDAC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
+ .consumer_supplies = max8997_ldo8_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "VCC_2.8V_PDA",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "LVDS_VDD3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
+ .consumer_supplies = max8997_ldo11_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo12_data = {
+ .constraints = {
+ .name = "VT_CAM_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
+ .consumer_supplies = max8997_ldo12_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo13_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
+ .consumer_supplies = max8997_ldo13_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "VCC_3.0V_MOTOR",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
+ .consumer_supplies = max8997_ldo14_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo15_data = {
+ .constraints = {
+ .name = "VTOUCH_ADVV2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
+ .consumer_supplies = max8997_ldo15_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo16_data = {
+ .constraints = {
+ .name = "CAM_SENSOR_IO_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
+ .consumer_supplies = max8997_ldo16_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo18_data = {
+ .constraints = {
+ .name = "VTOUCH_VDD2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
+ .consumer_supplies = max8997_ldo18_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V_C210",
+ .min_uV = 900000,
+ .max_uV = 1350000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
+ .consumer_supplies = max8997_buck1_,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
+ .consumer_supplies = max8997_buck2_,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VG3D_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
+ .consumer_supplies = max8997_buck3_,
+};
+
+static struct regulator_init_data __initdata max8997_buck4_data = {
+ .constraints = {
+ .name = "CAM_ISP_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
+ .consumer_supplies = max8997_buck4_,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VMEM_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck6_data = {
+ .constraints = {
+ .name = "CAM_AF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
+ .consumer_supplies = max8997_buck6_,
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VCC_SUB_2.0V",
+ .min_uV = 2000000,
+ .max_uV = 2000000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_32khz_ap_data = {
+ .constraints = {
+ .name = "32KHz AP",
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
+ .consumer_supplies = max8997_32khz_ap_,
+};
+
+static struct regulator_init_data __initdata max8997_32khz_cp_data = {
+ .constraints = {
+ .name = "32KHz CP",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_vichg_data = {
+ .constraints = {
+ .name = "VICHG",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_esafeout1_data = {
+ .constraints = {
+ .name = "SAFEOUT1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
+ .consumer_supplies = max8997_esafeout1_,
+};
+
+static struct regulator_init_data __initdata max8997_esafeout2_data = {
+ .constraints = {
+ .name = "SAFEOUT2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
+ .consumer_supplies = max8997_esafeout2_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_cv_data = {
+ .constraints = {
+ .name = "CHARGER_CV",
+ .min_uV = 4200000,
+ .max_uV = 4200000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data __initdata max8997_charger_data = {
+ .constraints = {
+ .name = "CHARGER",
+ .min_uA = 200000,
+ .max_uA = 950000,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
+ .consumer_supplies = max8997_charger_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_topoff_data = {
+ .constraints = {
+ .name = "CHARGER TOPOFF",
+ .min_uA = 50000,
+ .max_uA = 200000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
+ .consumer_supplies = max8997_chg_toff_,
+};
+
+static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO5, &max8997_ldo5_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO12, &max8997_ldo12_data },
+ { MAX8997_LDO13, &max8997_ldo13_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO15, &max8997_ldo15_data },
+ { MAX8997_LDO16, &max8997_ldo16_data },
+
+ { MAX8997_LDO18, &max8997_ldo18_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK4, &max8997_buck4_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK6, &max8997_buck6_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+
+ { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
+ { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
+
+ { MAX8997_ENVICHG, &max8997_vichg_data },
+ { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
+ { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
+ { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
+ { MAX8997_CHARGER, &max8997_charger_data },
+ { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
+};
+
+static struct max8997_platform_data __initdata nuri_max8997_pdata = {
+ .wakeup = 1,
+
+ .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
+ .regulators = nuri_max8997_regulators,
+
+ .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
+ .buck2_gpiodvs = true,
+
+ .buck1_voltage[0] = 1350000, /* 1.35V */
+ .buck1_voltage[1] = 1300000, /* 1.3V */
+ .buck1_voltage[2] = 1250000, /* 1.25V */
+ .buck1_voltage[3] = 1200000, /* 1.2V */
+ .buck1_voltage[4] = 1150000, /* 1.15V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1200000, /* 1.2V */
+ .buck5_voltage[1] = 1200000, /* 1.2V */
+ .buck5_voltage[2] = 1200000, /* 1.2V */
+ .buck5_voltage[3] = 1200000, /* 1.2V */
+ .buck5_voltage[4] = 1200000, /* 1.2V */
+ .buck5_voltage[5] = 1200000, /* 1.2V */
+ .buck5_voltage[6] = 1200000, /* 1.2V */
+ .buck5_voltage[7] = 1200000, /* 1.2V */
+};
+
/* GPIO I2C 5 (PMIC) */
+enum { I2C5_MAX8997 };
static struct i2c_board_info i2c5_devs[] __initdata = {
- /* max8997, To be updated */
+ [I2C5_MAX8997] = {
+ I2C_BOARD_INFO("max8997", 0xCC >> 1),
+ .platform_data = &nuri_max8997_pdata,
+ },
+};
+
+static struct max17042_platform_data nuri_battery_platform_data = {
+};
+
+/* GPIO I2C 9 (Fuel Gauge) */
+static struct i2c_gpio_platform_data i2c9_gpio_data = {
+ .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
+ .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
+};
+static struct platform_device i2c9_gpio = {
+ .name = "i2c-gpio",
+ .id = 9,
+ .dev = {
+ .platform_data = &i2c9_gpio_data,
+ },
};
+enum { I2C9_MAX17042};
+static struct i2c_board_info i2c9_devs[] __initdata = {
+ [I2C9_MAX17042] = {
+ I2C_BOARD_INFO("max17042", 0x36),
+ .platform_data = &nuri_battery_platform_data,
+ },
+};
+
+/* MAX8903 Secondary Charger */
+static struct regulator_consumer_supply supplies_max8903[] = {
+ REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
+};
+
+static struct regulator_init_data max8903_charger_en_data = {
+ .constraints = {
+ .name = "VOUT_CHARGER",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
+ .consumer_supplies = supplies_max8903,
+};
+
+static struct fixed_voltage_config max8903_charger_en = {
+ .supply_name = "VOUT_CHARGER",
+ .microvolts = 5000000, /* Assume 5VDC */
+ .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
+ .enable_high = 0, /* Enable = Low */
+ .enabled_at_boot = 1,
+ .init_data = &max8903_charger_en_data,
+};
+
+static struct platform_device max8903_fixed_reg_dev = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MAX8903,
+ .dev = { .platform_data = &max8903_charger_en },
+};
+
+static struct max8903_pdata nuri_max8903 = {
+ /*
+ * cen: don't control with the driver, let it be
+ * controlled by regulator above
+ */
+ .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
+ /* uok, usus: not connected */
+ .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
+ /* flt: vcc_1.8V_pda */
+ .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
+
+ .dc_valid = true,
+ .usb_valid = false, /* USB is not wired to MAX8903 */
+};
+
+static struct platform_device nuri_max8903_device = {
+ .name = "max8903-charger",
+ .dev = {
+ .platform_data = &nuri_max8903,
+ },
+};
+
+static struct device *nuri_cm_devices[] = {
+ &s3c_device_i2c5.dev,
+ &s3c_device_adc.dev,
+ NULL, /* Reserved for UART */
+ NULL,
+};
+
+static void __init nuri_power_init(void)
+{
+ int gpio;
+ int irq_base = IRQ_GPIO_END + 1;
+ int ta_en = 0;
+
+ nuri_max8997_pdata.irq_base = irq_base;
+ irq_base += MAX8997_IRQ_NR;
+
+ gpio = EXYNOS4_GPX0(7);
+ gpio_request(gpio, "AP_PMIC_IRQ");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = EXYNOS4_GPX2(3);
+ gpio_request(gpio, "FUEL_ALERT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = nuri_max8903.dok;
+ gpio_request(gpio, "TA_nCONNECTED");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ ta_en = gpio_get_value(gpio) ? 0 : 1;
+
+ gpio = nuri_max8903.chg;
+ gpio_request(gpio, "TA_nCHG");
+ gpio_direction_input(gpio);
+
+ gpio = nuri_max8903.dcm;
+ gpio_request(gpio, "CURR_ADJ");
+ gpio_direction_output(gpio, ta_en);
+}
/* USB EHCI */
static struct s5p_ehci_platdata nuri_ehci_pdata;
@@ -361,6 +1090,7 @@ static void __init nuri_ehci_init(void)
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s3c_device_i2c5, /* PMIC should initialize first */
&emmc_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
@@ -369,11 +1099,20 @@ static struct platform_device *nuri_devices[] __initdata = {
&s3c_device_timer[0],
&s5p_device_ehci,
&s3c_device_i2c3,
+ &i2c9_gpio,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
/* NURI Devices */
&nuri_gpio_keys,
&nuri_lcd_device,
&nuri_backlight_device,
+ &max8903_fixed_reg_dev,
+ &nuri_max8903_device,
};
static void __init nuri_map_io(void)
@@ -383,21 +1122,32 @@ static void __init nuri_map_io(void)
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
+static void __init nuri_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
+ nuri_power_init();
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+ s3c_i2c5_set_platdata(NULL);
+ i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
+ i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(NURI, "NURI")
@@ -407,4 +1157,5 @@ MACHINE_START(NURI, "NURI")
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
+ .reserve = &nuri_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
index f606ea75bf43..a7c65e05c1eb 100644
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ b/arch/arm/mach-exynos4/mach-smdkc210.c
@@ -9,7 +9,9 @@
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
@@ -20,11 +22,15 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
+
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/pd.h>
@@ -114,6 +120,67 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkc210_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkc210_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkc210_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
+ .win[0] = &smdkc210_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkc210_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
@@ -168,6 +235,8 @@ static struct platform_device *smdkc210_devices[] __initdata = {
&exynos4_device_pd[PD_GPS],
&exynos4_device_sysmmu,
&samsung_asoc_dma,
+ &s5p_device_fimd0,
+ &smdkc210_lcd_lte480wv,
&smdkc210_smsc911x,
};
@@ -225,6 +294,7 @@ static void __init smdkc210_machine_init(void)
s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
+ s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index df1107828abd..ea4149556860 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -184,9 +184,12 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&exynos4_device_pd[PD_CAM],
&exynos4_device_pd[PD_TV],
&exynos4_device_pd[PD_GPS],
+ &exynos4_device_spdif,
&exynos4_device_sysmmu,
&samsung_asoc_dma,
+ &samsung_asoc_idma,
&smdkv310_smsc911x,
+ &exynos4_device_ahci,
};
static void __init smdkv310_smsc911x_init(void)
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index 97d329fff2cf..b3b5d8911004 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -18,6 +18,9 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/max8952.h>
#include <linux/mmc/host.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/mcs.h>
+#include <linux/i2c/atmel_mxt_ts.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -27,7 +30,10 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/mfc.h>
#include <plat/sdhci.h>
+#include <plat/pd.h>
#include <mach/map.h>
@@ -73,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
};
static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vddarm", NULL);
+ REGULATOR_SUPPLY("vdd_arm", NULL);
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
@@ -99,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = {
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vddint", NULL);
+ REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
@@ -477,6 +483,96 @@ static struct i2c_board_info i2c5_devs[] __initdata = {
},
};
+/* I2C3 (TSP) */
+static struct mxt_platform_data qt602240_platform_data = {
+ .x_line = 19,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x11,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init universal_tsp_init(void)
+{
+ int gpio;
+
+ /* TSP_LDO_ON: XMDMADDR_11 */
+ gpio = EXYNOS4_GPE2(3);
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ /* TSP_INT: XMDMADDR_7 */
+ gpio = EXYNOS4_GPE1(7);
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c3_devs[0].irq = gpio_to_irq(gpio);
+}
+
+
+/* GPIO I2C 12 (3 Touchkey) */
+static uint32_t touchkey_keymap[] = {
+ /* MCS_KEY_MAP(value, keycode) */
+ MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
+ MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
+};
+
+static struct mcs_platform_data touchkey_data = {
+ .keymap = touchkey_keymap,
+ .keymap_size = ARRAY_SIZE(touchkey_keymap),
+ .key_maxval = 2,
+};
+
+/* GPIO I2C 3_TOUCH 2.8V */
+#define I2C_GPIO_BUS_12 12
+static struct i2c_gpio_platform_data i2c_gpio12_data = {
+ .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
+ .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
+};
+
+static struct platform_device i2c_gpio12 = {
+ .name = "i2c-gpio",
+ .id = I2C_GPIO_BUS_12,
+ .dev = {
+ .platform_data = &i2c_gpio12_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
+ .platform_data = &touchkey_data,
+ },
+};
+
+static void __init universal_touchkey_init(void)
+{
+ int gpio;
+
+ gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
+ gpio_request(gpio, "3_TOUCH_INT");
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
+ gpio_request(gpio, "3_TOUCH_EN");
+ gpio_direction_output(gpio, 1);
+}
+
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
@@ -608,15 +704,25 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
+ &s3c_device_i2c3,
&s3c_device_i2c5,
/* Universal Devices */
+ &i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
};
static void __init universal_map_io(void)
@@ -626,6 +732,11 @@ static void __init universal_map_io(void)
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
+static void __init universal_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init universal_machine_init(void)
{
universal_sdhci_init();
@@ -633,11 +744,20 @@ static void __init universal_machine_init(void)
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ universal_tsp_init();
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+
s3c_i2c5_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ universal_touchkey_init();
+ i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
+ ARRAY_SIZE(i2c_gpio12_devs));
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
@@ -647,4 +767,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
+ .reserve = &universal_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 14ac10b7ec02..1ae059b7ad7b 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -383,8 +383,8 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- irq_set_affinity(IRQ_MCT1, cpumask_of(1));
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
}
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index b68d5bdf04cf..7c2282c6ba81 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -28,9 +28,12 @@
#include <mach/hardware.h>
#include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
extern void exynos4_secondary_startup(void);
+#define CPU1_BOOT_REG S5P_VA_SYSRAM
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
@@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+ void __iomem *dist_base = S5P_VA_GIC_DIST +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ void __iomem *cpu_base = S5P_VA_GIC_CPU +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ int i;
+
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+ __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ __raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
@@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_secondary_init(0);
+ exynos4_gic_secondary_init();
/*
* let the primary processor know we're out of the
@@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu);
+ if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ S5P_ARM_CORE1_CONFIGURATION);
+
+ timeout = 10;
+
+ /* wait max 10 ms until cpu1 is on */
+ while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ if (timeout-- == 0)
+ break;
+
+ mdelay(1);
+ }
+
+ if (timeout == 0) {
+ printk(KERN_ERR "cpu1 power enable failed");
+ spin_unlock(&boot_lock);
+ return -ETIMEDOUT;
+ }
+ }
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
+
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
+ gic_raise_softirq(cpumask_of(cpu), 1);
+
if (pen_release == -1)
break;
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 533c28f758ca..bc6ca9482de1 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -18,92 +18,23 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/regs-srom.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/pm-core.h>
-
-static struct sleep_save exynos4_sleep[] = {
- { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, },
- { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, },
- { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, },
- { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, },
- { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, },
- { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, },
- { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, },
- { .reg = S5P_L2_0_LOWPWR , .val = 0x3, },
- { .reg = S5P_L2_1_LOWPWR , .val = 0x3, },
- { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, },
- { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, },
- { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, },
- { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, },
- { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, },
- { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, },
- { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, },
- { .reg = S5P_XXTI_LOWPWR , .val = 0x0, },
- { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, },
-};
+#include <mach/pmu.h>
static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
@@ -118,20 +49,28 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4_epll_save[] = {
+ SAVE_ITEM(S5P_EPLL_CON0),
+ SAVE_ITEM(S5P_EPLL_CON1),
+};
+
+static struct sleep_save exynos4_vpll_save[] = {
+ SAVE_ITEM(S5P_VPLL_CON0),
+ SAVE_ITEM(S5P_VPLL_CON1),
+};
+
static struct sleep_save exynos4_core_save[] = {
/* CMU side */
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_EPLL_CON0),
- SAVE_ITEM(S5P_EPLL_CON1),
- SAVE_ITEM(S5P_VPLL_CON0),
- SAVE_ITEM(S5P_VPLL_CON1),
SAVE_ITEM(S5P_CLKSRC_TOP0),
SAVE_ITEM(S5P_CLKSRC_TOP1),
SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD0),
SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -158,6 +97,7 @@ static struct sleep_save exynos4_core_save[] = {
SAVE_ITEM(S5P_CLKDIV_PERIL4),
SAVE_ITEM(S5P_CLKDIV_PERIL5),
SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
SAVE_ITEM(S5P_CLKSRC_MASK_TV),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
@@ -166,6 +106,7 @@ static struct sleep_save exynos4_core_save[] = {
SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
SAVE_ITEM(S5P_CLKGATE_IP_CAM),
SAVE_ITEM(S5P_CLKGATE_IP_TV),
@@ -186,8 +127,10 @@ static struct sleep_save exynos4_core_save[] = {
SAVE_ITEM(S5P_CLKGATE_IP_DMC),
SAVE_ITEM(S5P_CLKSRC_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -270,6 +213,13 @@ static struct sleep_save exynos4_core_save[] = {
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
+
+ /* SROM side */
+ SAVE_ITEM(S5P_SROM_BW),
+ SAVE_ITEM(S5P_SROM_BC0),
+ SAVE_ITEM(S5P_SROM_BC1),
+ SAVE_ITEM(S5P_SROM_BC2),
+ SAVE_ITEM(S5P_SROM_BC3),
};
static struct sleep_save exynos4_l2cc_save[] = {
@@ -280,37 +230,11 @@ static struct sleep_save exynos4_l2cc_save[] = {
SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
};
+/* For Cortex-A9 Diagnostic and Power control register */
+static unsigned int save_arm_register[2];
+
static int exynos4_cpu_suspend(unsigned long arg)
{
- unsigned long tmp;
- unsigned long mask = 0xFFFFFFFF;
-
- /* Setting Central Sequence Register for power down mode */
-
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- tmp &= ~(S5P_CENTRAL_LOWPWR_CFG);
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
- /* Setting Central Sequence option Register */
-
- tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
- tmp &= ~(S5P_USE_MASK);
- tmp |= S5P_USE_STANDBY_WFI0;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-
- /* Clear all interrupt pending to avoid early wakeup */
-
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288));
-
- /* Disable all interrupt */
-
- __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000));
- __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188));
-
outer_flush_all();
/* issue the standby signal into the pm unit. */
@@ -326,12 +250,14 @@ static void exynos4_pm_prepare(void)
s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
+ s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
+ s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
tmp = __raw_readl(S5P_INFORM1);
/* Set value of power down register for sleep mode */
- s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep));
+ exynos4_sys_powerdown_conf(SYS_SLEEP);
__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
/* ensure at least INFORM0 has the resume address */
@@ -373,12 +299,80 @@ void exynos4_scu_enable(void __iomem *scu_base)
flush_cache_all();
}
+static unsigned long pll_base_rate;
+
+static void exynos4_restore_pll(void)
+{
+ unsigned long pll_con, locktime, lockcnt;
+ unsigned long pll_in_rate;
+ unsigned int p_div, epll_wait = 0, vpll_wait = 0;
+
+ if (pll_base_rate == 0)
+ return;
+
+ pll_in_rate = pll_base_rate;
+
+ /* EPLL */
+ pll_con = exynos4_epll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
+ p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
+
+ pll_in_rate /= 1000000;
+
+ locktime = (3000 / pll_in_rate) * p_div;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_EPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_epll_save,
+ ARRAY_SIZE(exynos4_epll_save));
+ epll_wait = 1;
+ }
+
+ pll_in_rate = pll_base_rate;
+
+ /* VPLL */
+ pll_con = exynos4_vpll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_in_rate /= 1000000;
+ /* 750us */
+ locktime = 750;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_VPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_vpll_save,
+ ARRAY_SIZE(exynos4_vpll_save));
+ vpll_wait = 1;
+ }
+
+ /* Wait PLL locking */
+
+ do {
+ if (epll_wait) {
+ pll_con = __raw_readl(S5P_EPLL_CON0);
+ if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
+ epll_wait = 0;
+ }
+
+ if (vpll_wait) {
+ pll_con = __raw_readl(S5P_VPLL_CON0);
+ if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
+ vpll_wait = 0;
+ }
+ } while (epll_wait || vpll_wait);
+}
+
static struct sysdev_driver exynos4_pm_driver = {
.add = exynos4_pm_add,
};
static __init int exynos4_pm_drvinit(void)
{
+ struct clk *pll_base;
unsigned int tmp;
s3c_pm_init();
@@ -389,12 +383,69 @@ static __init int exynos4_pm_drvinit(void)
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
+ pll_base = clk_get(NULL, "xtal");
+
+ if (!IS_ERR(pll_base)) {
+ pll_base_rate = clk_get_rate(pll_base);
+ clk_put(pll_base);
+ }
+
return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
}
arch_initcall(exynos4_pm_drvinit);
+static int exynos4_pm_suspend(void)
+{
+ unsigned long tmp;
+
+ /* Setting Central Sequence Register for power down mode */
+
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ /* Save Power control register */
+ asm ("mrc p15, 0, %0, c15, c0, 0"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[0] = tmp;
+
+ /* Save Diagnostic register */
+ asm ("mrc p15, 0, %0, c15, c0, 1"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[1] = tmp;
+
+ return 0;
+}
+
static void exynos4_pm_resume(void)
{
+ unsigned long tmp;
+
+ /*
+ * If PMU failed while entering sleep mode, WFI will be
+ * ignored by PMU and then exiting cpu_do_idle().
+ * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+ * in this situation.
+ */
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+ tmp |= S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ /* No need to perform below restore code */
+ goto early_wakeup;
+ }
+ /* Restore Power control register */
+ tmp = save_arm_register[0];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+ : : "r" (tmp)
+ : "cc");
+
+ /* Restore Diagnostic register */
+ tmp = save_arm_register[1];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+ : : "r" (tmp)
+ : "cc");
+
/* For release retention */
__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
@@ -407,6 +458,8 @@ static void exynos4_pm_resume(void)
s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
+ exynos4_restore_pll();
+
exynos4_scu_enable(S5P_VA_SCU);
#ifdef CONFIG_CACHE_L2X0
@@ -415,9 +468,13 @@ static void exynos4_pm_resume(void)
/* enable L2X0*/
writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
#endif
+
+early_wakeup:
+ return;
}
static struct syscore_ops exynos4_pm_syscore_ops = {
+ .suspend = exynos4_pm_suspend,
.resume = exynos4_pm_resume,
};
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
new file mode 100644
index 000000000000..7ea9eb2a20d2
--- /dev/null
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static void __iomem *sys_powerdown_reg[] = {
+ S5P_ARM_CORE0_LOWPWR,
+ S5P_DIS_IRQ_CORE0,
+ S5P_DIS_IRQ_CENTRAL0,
+ S5P_ARM_CORE1_LOWPWR,
+ S5P_DIS_IRQ_CORE1,
+ S5P_DIS_IRQ_CENTRAL1,
+ S5P_ARM_COMMON_LOWPWR,
+ S5P_L2_0_LOWPWR,
+ S5P_L2_1_LOWPWR,
+ S5P_CMU_ACLKSTOP_LOWPWR,
+ S5P_CMU_SCLKSTOP_LOWPWR,
+ S5P_CMU_RESET_LOWPWR,
+ S5P_APLL_SYSCLK_LOWPWR,
+ S5P_MPLL_SYSCLK_LOWPWR,
+ S5P_VPLL_SYSCLK_LOWPWR,
+ S5P_EPLL_SYSCLK_LOWPWR,
+ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
+ S5P_CMU_RESET_GPSALIVE_LOWPWR,
+ S5P_CMU_CLKSTOP_CAM_LOWPWR,
+ S5P_CMU_CLKSTOP_TV_LOWPWR,
+ S5P_CMU_CLKSTOP_MFC_LOWPWR,
+ S5P_CMU_CLKSTOP_G3D_LOWPWR,
+ S5P_CMU_CLKSTOP_LCD0_LOWPWR,
+ S5P_CMU_CLKSTOP_LCD1_LOWPWR,
+ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
+ S5P_CMU_CLKSTOP_GPS_LOWPWR,
+ S5P_CMU_RESET_CAM_LOWPWR,
+ S5P_CMU_RESET_TV_LOWPWR,
+ S5P_CMU_RESET_MFC_LOWPWR,
+ S5P_CMU_RESET_G3D_LOWPWR,
+ S5P_CMU_RESET_LCD0_LOWPWR,
+ S5P_CMU_RESET_LCD1_LOWPWR,
+ S5P_CMU_RESET_MAUDIO_LOWPWR,
+ S5P_CMU_RESET_GPS_LOWPWR,
+ S5P_TOP_BUS_LOWPWR,
+ S5P_TOP_RETENTION_LOWPWR,
+ S5P_TOP_PWR_LOWPWR,
+ S5P_LOGIC_RESET_LOWPWR,
+ S5P_ONENAND_MEM_LOWPWR,
+ S5P_MODIMIF_MEM_LOWPWR,
+ S5P_G2D_ACP_MEM_LOWPWR,
+ S5P_USBOTG_MEM_LOWPWR,
+ S5P_HSMMC_MEM_LOWPWR,
+ S5P_CSSYS_MEM_LOWPWR,
+ S5P_SECSS_MEM_LOWPWR,
+ S5P_PCIE_MEM_LOWPWR,
+ S5P_SATA_MEM_LOWPWR,
+ S5P_PAD_RETENTION_DRAM_LOWPWR,
+ S5P_PAD_RETENTION_MAUDIO_LOWPWR,
+ S5P_PAD_RETENTION_GPIO_LOWPWR,
+ S5P_PAD_RETENTION_UART_LOWPWR,
+ S5P_PAD_RETENTION_MMCA_LOWPWR,
+ S5P_PAD_RETENTION_MMCB_LOWPWR,
+ S5P_PAD_RETENTION_EBIA_LOWPWR,
+ S5P_PAD_RETENTION_EBIB_LOWPWR,
+ S5P_PAD_RETENTION_ISOLATION_LOWPWR,
+ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
+ S5P_XUSBXTI_LOWPWR,
+ S5P_XXTI_LOWPWR,
+ S5P_EXT_REGULATOR_LOWPWR,
+ S5P_GPIO_MODE_LOWPWR,
+ S5P_GPIO_MODE_MAUDIO_LOWPWR,
+ S5P_CAM_LOWPWR,
+ S5P_TV_LOWPWR,
+ S5P_MFC_LOWPWR,
+ S5P_G3D_LOWPWR,
+ S5P_LCD0_LOWPWR,
+ S5P_LCD1_LOWPWR,
+ S5P_MAUDIO_LOWPWR,
+ S5P_GPS_LOWPWR,
+ S5P_GPS_ALIVE_LOWPWR,
+};
+
+static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
+ /* { AFTR, LPA, SLEEP }*/
+ { 0, 0, 2 }, /* ARM_CORE0 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */
+ { 0, 0, 2 }, /* ARM_CORE1 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */
+ { 0, 0, 2 }, /* ARM_COMMON */
+ { 2, 2, 3 }, /* ARM_CPU_L2_0 */
+ { 2, 2, 3 }, /* ARM_CPU_L2_1 */
+ { 1, 0, 0 }, /* CMU_ACLKSTOP */
+ { 1, 0, 0 }, /* CMU_SCLKSTOP */
+ { 1, 1, 0 }, /* CMU_RESET */
+ { 1, 0, 0 }, /* APLL_SYSCLK */
+ { 1, 0, 0 }, /* MPLL_SYSCLK */
+ { 1, 0, 0 }, /* VPLL_SYSCLK */
+ { 1, 1, 0 }, /* EPLL_SYSCLK */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */
+ { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_TV */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */
+ { 1, 1, 0 }, /* CMU_RESET_CAM */
+ { 1, 1, 0 }, /* CMU_RESET_TV */
+ { 1, 1, 0 }, /* CMU_RESET_MFC */
+ { 1, 1, 0 }, /* CMU_RESET_G3D */
+ { 1, 1, 0 }, /* CMU_RESET_LCD0 */
+ { 1, 1, 0 }, /* CMU_RESET_LCD1 */
+ { 1, 1, 0 }, /* CMU_RESET_MAUDIO */
+ { 1, 1, 0 }, /* CMU_RESET_GPS */
+ { 3, 0, 0 }, /* TOP_BUS */
+ { 1, 0, 1 }, /* TOP_RETENTION */
+ { 3, 0, 3 }, /* TOP_PWR */
+ { 1, 1, 0 }, /* LOGIC_RESET */
+ { 3, 0, 0 }, /* ONENAND_MEM */
+ { 3, 0, 0 }, /* MODIMIF_MEM */
+ { 3, 0, 0 }, /* G2D_ACP_MEM */
+ { 3, 0, 0 }, /* USBOTG_MEM */
+ { 3, 0, 0 }, /* HSMMC_MEM */
+ { 3, 0, 0 }, /* CSSYS_MEM */
+ { 3, 0, 0 }, /* SECSS_MEM */
+ { 3, 0, 0 }, /* PCIE_MEM */
+ { 3, 0, 0 }, /* SATA_MEM */
+ { 1, 0, 0 }, /* PAD_RETENTION_DRAM */
+ { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */
+ { 1, 0, 0 }, /* PAD_RETENTION_GPIO */
+ { 1, 0, 0 }, /* PAD_RETENTION_UART */
+ { 1, 0, 0 }, /* PAD_RETENTION_MMCA */
+ { 1, 0, 0 }, /* PAD_RETENTION_MMCB */
+ { 1, 0, 0 }, /* PAD_RETENTION_EBIA */
+ { 1, 0, 0 }, /* PAD_RETENTION_EBIB */
+ { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */
+ { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */
+ { 1, 1, 0 }, /* XUSBXTI */
+ { 1, 1, 0 }, /* XXTI */
+ { 1, 1, 0 }, /* EXT_REGULATOR */
+ { 1, 0, 0 }, /* GPIO_MODE */
+ { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */
+ { 7, 0, 0 }, /* CAM */
+ { 7, 0, 0 }, /* TV */
+ { 7, 0, 0 }, /* MFC */
+ { 7, 0, 0 }, /* G3D */
+ { 7, 0, 0 }, /* LCD0 */
+ { 7, 0, 0 }, /* LCD1 */
+ { 7, 7, 0 }, /* MAUDIO */
+ { 7, 0, 0 }, /* GPS */
+ { 7, 0, 0 }, /* GPS_ALIVE */
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+
+ for (; count > 0; count--)
+ __raw_writel(sys_powerdown_val[count - 1][mode],
+ sys_powerdown_reg[count - 1]);
+}
diff --git a/arch/arm/mach-exynos4/setup-fimd0.c b/arch/arm/mach-exynos4/setup-fimd0.c
new file mode 100644
index 000000000000..07a6dbeecdd0
--- /dev/null
+++ b/arch/arm/mach-exynos4/setup-fimd0.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/mach-exynos4/setup-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base Exynos4 FIMD 0 configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-fb-v4.h>
+
+#include <mach/map.h>
+
+void exynos4_fimd0_gpio_setup_24bpp(void)
+{
+ unsigned int reg;
+
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
+
+ /*
+ * Set DISPLAY_CONTROL register for Display path selection.
+ *
+ * DISPLAY_CONTROL[1:0]
+ * ---------------------
+ * 00 | MIE
+ * 01 | MDINE
+ * 10 | FIMD : selected
+ * 11 | FIMD
+ */
+ reg = __raw_readl(S3C_VA_SYS + 0x0210);
+ reg |= (1 << 1);
+ __raw_writel(reg, S3C_VA_SYS + 0x0210);
+}
diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c
index 0883c1b824b9..39aca045f660 100644
--- a/arch/arm/mach-exynos4/setup-usb-phy.c
+++ b/arch/arm/mach-exynos4/setup-usb-phy.c
@@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
writel(rstcon, EXYNOS4_RSTCON);
- udelay(50);
+ udelay(80);
clk_disable(otg_clk);
clk_put(otg_clk);
diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c
deleted file mode 100644
index ebb8f38d5405..000000000000
--- a/arch/arm/mach-exynos4/time.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/* linux/arch/arm/mach-exynos4/time.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 (and compatible) HRT support
- * PWM 2/4 is used for this feature
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <asm/mach/time.h>
-
-static unsigned long clock_count_per_tick;
-
-static struct clk *tin2;
-static struct clk *tin4;
-static struct clk *tdiv2;
-static struct clk *tdiv4;
-static struct clk *timerclk;
-
-static void exynos4_pwm_stop(unsigned int pwm_id)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (pwm_id) {
- case 2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
- case 4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
- default:
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- /* timers reload after counting zero, so reduce the count by 1 */
- tcnt--;
-
- /* ensure timer is stopped... */
- switch (pwm_id) {
- case 2:
- tcon &= ~(0xf<<12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
-
- __raw_writel(tcnt, S3C2410_TCNTB(2));
- __raw_writel(tcnt, S3C2410_TCMPB(2));
- __raw_writel(tcon, S3C2410_TCON);
-
- break;
- case 4:
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
- __raw_writel(tcon, S3C2410_TCON);
-
- break;
- default:
- break;
- }
-}
-
-static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (pwm_id) {
- case 2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
- case 4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
- default:
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int exynos4_pwm_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- exynos4_pwm_init(2, cycles);
- exynos4_pwm_start(2, 0);
- return 0;
-}
-
-static void exynos4_pwm_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- exynos4_pwm_stop(2);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- exynos4_pwm_init(2, clock_count_per_tick);
- exynos4_pwm_start(2, 1);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device pwm_event_device = {
- .name = "pwm_timer2",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .shift = 32,
- .set_next_event = exynos4_pwm_set_next_event,
- .set_mode = exynos4_pwm_set_mode,
-};
-
-irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &pwm_event_device;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction exynos4_clock_event_irq = {
- .name = "pwm_timer2_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = exynos4_clock_event_isr,
-};
-
-static void __init exynos4_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- tscaler = clk_get_parent(tdiv2);
-
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv2, pclk / 2);
- clk_set_parent(tin2, tdiv2);
-
- clock_rate = clk_get_rate(tin2);
-
- clock_count_per_tick = clock_rate / HZ;
-
- pwm_event_device.mult =
- div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
- pwm_event_device.max_delta_ns =
- clockevent_delta2ns(-1, &pwm_event_device);
- pwm_event_device.min_delta_ns =
- clockevent_delta2ns(1, &pwm_event_device);
-
- pwm_event_device.cpumask = cpumask_of(0);
- clockevents_register_device(&pwm_event_device);
-
- setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq);
-}
-
-static cycle_t exynos4_pwm4_read(struct clocksource *cs)
-{
- return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
-}
-
-#ifdef CONFIG_PM
-static void exynos4_pwm4_resume(struct clocksource *cs)
-{
- unsigned long pclk;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv4, pclk / 2);
- clk_set_parent(tin4, tdiv4);
-
- exynos4_pwm_init(4, ~0);
- exynos4_pwm_start(4, 1);
-}
-#endif
-
-struct clocksource pwm_clocksource = {
- .name = "pwm_timer4",
- .rating = 250,
- .read = exynos4_pwm4_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS ,
-#ifdef CONFIG_PM
- .resume = exynos4_pwm4_resume,
-#endif
-};
-
-static void __init exynos4_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv4, pclk / 2);
- clk_set_parent(tin4, tdiv4);
-
- clock_rate = clk_get_rate(tin4);
-
- exynos4_pwm_init(4, ~0);
- exynos4_pwm_start(4, 1);
-
- if (clocksource_register_hz(&pwm_clocksource, clock_rate))
- panic("%s: can't register clocksource\n", pwm_clocksource.name);
-}
-
-static void __init exynos4_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for system timer");
-
- clk_enable(timerclk);
-
- tmpdev.id = 2;
- tin2 = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin2))
- panic("failed to get pwm-tin2 clock for system timer");
-
- tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv2))
- panic("failed to get pwm-tdiv2 clock for system timer");
- clk_enable(tin2);
-
- tmpdev.id = 4;
- tin4 = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin4))
- panic("failed to get pwm-tin4 clock for system timer");
-
- tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv4))
- panic("failed to get pwm-tdiv4 clock for system timer");
-
- clk_enable(tin4);
-}
-
-static void __init exynos4_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- twd_base = S5P_VA_TWD;
-#endif
-
- exynos4_timer_resources();
- exynos4_clockevent_init();
- exynos4_clocksource_init();
-}
-
-struct sys_timer exynos4_timer = {
- .init = exynos4_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index dc26fff22cf0..c8e7afcf14ec 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST
config ARCH_NETWINDER
bool "NetWinder"
select CLKSRC_I8253
+ select CLKEVT_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index ae3e1c8c7583..32321f66dec4 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -16,7 +16,7 @@
/* cats host-specific stuff */
static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
-static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->irq >= 255)
return -1; /* not a valid interrupt. */
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 3ffa54841ec5..18c32a5541d9 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -18,6 +18,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -295,6 +296,9 @@ void __init dc21285_preinit(void)
unsigned int mem_size, mem_mask;
int cfn_mode;
+ pcibios_min_mem = 0x81000000;
+ vga_base = PCIMEM_BASE;
+
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
if (mem_mask >= mem_size)
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index e5ab5bddbc8c..511c673ffa9d 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -15,7 +15,7 @@
static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
-static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index b6fdf23ecf6c..15d54981674c 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -100,9 +100,4 @@ extern unsigned int nw_gpio_read(void);
extern void nw_cpld_modify(unsigned int mask, unsigned int set);
#endif
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0x81000000
-
#endif
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index e263d6d54a0f..62187610e17e 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -17,7 +17,7 @@
* We now use the slot ID instead of the device identifiers to select
* which interrupt is routed where.
*/
-static int __init netwinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (slot) {
case 0: /* host bridge */
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
index d5fca95afdad..aeb651d914a6 100644
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ b/arch/arm/mach-footbridge/personal-pci.c
@@ -18,7 +18,8 @@ static int irqmap_personal_server[] __initdata = {
IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
};
-static int __init personal_server_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
unsigned char line;
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e8dd22fa7d61..0519dd7f034b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -278,6 +278,7 @@ config MACH_MX27_3DS
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
index dcc41728fe72..4aabeb241563 100644
--- a/arch/arm/mach-imx/clock-imx1.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = {
_REGISTER_CLOCK(NULL, "mma", mma_clk)
_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+ _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
+ _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
+ _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
_REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
index bf30a8c7ce6f..ee15d8c9db08 100644
--- a/arch/arm/mach-imx/clock-imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -1162,10 +1162,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
_REGISTER_CLOCK(NULL, "clko", clko_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
- _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
- _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
- _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0])
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1])
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2])
+ _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3])
_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index af1c580b06bc..e63e23504fe5 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -272,11 +272,12 @@ DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
},
static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ /* i.mx25 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
@@ -295,19 +296,20 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk)
_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ /* i.mx25 has the i.mx35 type sdma */
+ _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
};
int __init mx25_clocks_init(void)
@@ -329,6 +331,9 @@ int __init mx25_clocks_init(void)
__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
CRM_BASE + 0x64);
+ /* Clock source for gpt is ahb_div */
+ __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 583f2515c1d5..6912b821b37b 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -624,12 +624,13 @@ DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
},
static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+ /* i.mx27 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
@@ -662,7 +663,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk)
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
index 25f343fca2b9..d973770b1f96 100644
--- a/arch/arm/mach-imx/clock-imx31.c
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -547,11 +547,12 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ /* i.mx31 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
@@ -564,7 +565,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
+ _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 5a4cc1ea405b..88b62a071aea 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -458,10 +458,11 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
_REGISTER_CLOCK(NULL, "esai", esai_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk)
+ /* i.mx35 has the i.mx27 type fec */
+ _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
@@ -481,14 +482,15 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
_REGISTER_CLOCK(NULL, "spba", spba_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ /* i.mx35 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 01ebcb31e482..66e8726253fa 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -225,7 +225,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
- .wp_gpio = -EINVAL,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_NONE,
};
/*
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 558eb526ba56..0f0af02b3182 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -236,7 +236,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
- .wp_gpio = -EINVAL,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_NONE,
};
/*
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 87887ac5806b..f851fe903687 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
.init = eukrea_cpuimx27_timer_init,
};
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index f39a478ba1a6..4bd083ba9af2 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = {
.init = eukrea_cpuimx35_timer_init,
};
-MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index da36da52969d..2442d5da883d 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = {
.init = eukrea_cpuimx25_timer_init,
};
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
.boot_params = MX25_PHYS_OFFSET + 0x100,
.map_io = mx25_map_io,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6707de0ab716..6778f8193bc6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
.invert = 0,
};
+static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
+ .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
+ AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
+ AIC32X4_PWR_AIC32X4_LDO_ENABLE |
+ AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
+ AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
+ .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
+ AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
+ .swapdacs = false,
+};
+
static struct i2c_board_info visstrim_m10_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9555", 0x20),
@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
},
{
I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+ .platform_data = &visstrim_m10_aic32x4_pdata,
}
};
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 01534bb61305..7f66a91df361 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -215,6 +215,8 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
.wp_gpio = SD1_GPIO_WP,
.cd_gpio = SD1_GPIO_CD,
+ .wp_type = ESDHC_WP_GPIO,
+ .cd_type = ESDHC_CD_GPIO,
};
static void __init mx25pdk_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index b31d4129e10e..6fa6934ab150 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -29,6 +29,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
+#include <linux/spi/l4f00242t03.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,7 +48,10 @@
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
+#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
+#define LCD_RESET IMX_GPIO_NR(1, 3)
+#define LCD_ENABLE IMX_GPIO_NR(1, 31)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
@@ -96,6 +100,12 @@ static const int mx27pdk_pins[] __initconst = {
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
+ /* CSPI1 */
+ PD31_PF_CSPI1_MOSI,
+ PD30_PF_CSPI1_MISO,
+ PD29_PF_CSPI1_SCLK,
+ PD25_PF_CSPI1_RDY,
+ SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
/* CSPI2 */
PD22_PF_CSPI2_SCLK,
PD23_PF_CSPI2_MISO,
@@ -106,6 +116,31 @@ static const int mx27pdk_pins[] __initconst = {
PD18_PF_I2C_CLK,
/* PMIC INT */
PMIC_INT | GPIO_GPIO | GPIO_IN,
+ /* LCD */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
+ LCD_RESET | GPIO_GPIO | GPIO_OUT,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -258,10 +293,18 @@ static struct mc13xxx_platform_data mc13783_pdata = {
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR,
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
+ MC13783_USE_RTC,
};
/* SPI */
+static int spi1_chipselect[] = {SPI1_SS0};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+ .chipselect = spi1_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_chipselect),
+};
+
static int spi2_chipselect[] = {SPI2_SS0};
static const struct spi_imx_master spi2_pdata __initconst = {
@@ -269,6 +312,46 @@ static const struct spi_imx_master spi2_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
+static struct imx_fb_videomode mx27_3ds_modes[] = {
+ { /* 480x640 @ 60 Hz */
+ .mode = {
+ .name = "Epson-VGA",
+ .refresh = 60,
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 41701,
+ .left_margin = 20,
+ .right_margin = 41,
+ .upper_margin = 10,
+ .lower_margin = 5,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_OE_ACT_HIGH |
+ FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+ .bpp = 16,
+ .pcr = 0xFAC08B82,
+ },
+};
+
+static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
+ .mode = mx27_3ds_modes,
+ .num_modes = ARRAY_SIZE(mx27_3ds_modes),
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
+ .reset_gpio = LCD_RESET,
+ .data_enable_gpio = LCD_ENABLE,
+ .core_supply = "lcd_2v8",
+ .io_supply = "vdd_lcdio",
+};
+
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
@@ -278,6 +361,12 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
.platform_data = &mc13783_pdata,
.irq = gpio_to_irq(PMIC_INT),
.mode = SPI_CS_HIGH,
+ }, {
+ .modalias = "l4f00242t03",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 0, /* SS0 */
+ .platform_data = &mx27_3ds_lcd_pdata,
},
};
@@ -311,12 +400,14 @@ static void __init mx27pdk_init(void)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
+ imx27_add_spi_imx0(&spi1_pdata);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+ imx27_add_imx_fb(&mx27_3ds_fb_data);
}
static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 0ce49478a479..29ca8907a780 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
#endif
};
-static void mxc_init_i2c(void)
+static void __init mxc_init_i2c(void)
{
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
MX31_PIN_STXD5__STXD5,
};
-static void mxc_init_audio(void)
+static void __init mxc_init_audio(void)
{
imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 750368ddf0f9..126913ad106a 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
-static void lilly1131_usb_init(void)
+static void __init lilly1131_usb_init(void)
{
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 163cc318cafb..660ec3e80cf8 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -349,6 +349,8 @@ __setup("otg_mode=", pcm043_otg_mode);
static struct esdhc_platform_data sd1_pdata = {
.wp_gpio = SD1_GPIO_WP,
.cd_gpio = SD1_GPIO_CD,
+ .wp_type = ESDHC_WP_GPIO,
+ .cd_type = ESDHC_CD_GPIO,
};
/*
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 6d7d518686a5..3f05dfebacc9 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
@@ -82,4 +83,6 @@ void __init imx21_soc_init(void)
mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+
+ imx_add_imx_dma();
}
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 9a1591c2508d..cc4d152bd9bd 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -24,6 +24,7 @@
#include <asm/mach/map.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
@@ -61,6 +62,27 @@ void __init mx25_init_irq(void)
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1255,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1120,
+ .per_2_shp_addr = 1329,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1560,
+ .mcu_2_ata_addr = 1479,
+ .app_2_per_addr = 1189,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1407,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx25_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx25.bin",
+ .script_addrs = &imx25_sdma_script,
+};
+
void __init imx25_soc_init(void)
{
/* i.mx25 has the i.mx31 type gpio */
@@ -68,4 +90,7 @@ void __init imx25_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+
+ /* i.mx25 has the i.mx35 type sdma */
+ imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 133b30003ddb..96dd1f5ea7bd 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
@@ -83,4 +84,6 @@ void __init imx27_soc_init(void)
mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+
+ imx_add_imx_dma();
}
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
index 6d103c01b8b9..b7c55e7db000 100644
--- a/arch/arm/mach-imx/mm-imx31.c
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -24,6 +24,7 @@
#include <asm/mach/map.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
@@ -57,9 +58,34 @@ void __init mx31_init_irq(void)
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+ .per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 423,
+ .ap_2_bp_addr = 829,
+ .bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx31-to2.bin",
+ .script_addrs = &imx31_to2_sdma_script,
+};
+
void __init imx31_soc_init(void)
{
+ int to_version = mx31_revision() >> 4;
+
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+ strlen(imx31_sdma_pdata.fw_name));
+ imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
index bb068bc8dab7..f49bac7a1ede 100644
--- a/arch/arm/mach-imx/mm-imx35.c
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -25,6 +25,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
@@ -54,10 +55,55 @@ void __init mx35_init_irq(void)
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx35-to2.bin",
+ .script_addrs = &imx35_to2_sdma_script,
+};
+
void __init imx35_soc_init(void)
{
+ int to_version = mx35_revision() >> 4;
+
/* i.mx35 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+ strlen(imx35_sdma_pdata.fw_name));
+ imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 57f51ba11251..65fed7c0eb84 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -32,13 +32,6 @@
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
-#define PCIMEM_BASE PCI_MEMORY_VADDR
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x6000
-#define PCIBIOS_MIN_MEM 0x00100000
-
/* macro to get at IO space when running virtually */
#ifdef CONFIG_MMU
#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 2fbbdd5eac35..fcf0ae95651f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -337,15 +337,15 @@ static unsigned long timer_reload;
static void integrator_clocksource_init(u32 khz)
{
void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
- u32 ctrl = TIMER_CTRL_ENABLE;
+ u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
if (khz >= 1500) {
khz /= 16;
- ctrl = TIMER_CTRL_DIV16;
+ ctrl |= TIMER_CTRL_DIV16;
}
- writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
+ writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
khz * 1000, 200, 16, clocksource_mmio_readl_down);
diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c
index 2fdb95433f0a..520b6bf81bb1 100644
--- a/arch/arm/mach-integrator/pci.c
+++ b/arch/arm/mach-integrator/pci.c
@@ -95,7 +95,7 @@ static int irq_tab[4] __initdata = {
* map the specified device/slot/pin to an IRQ. This works out such
* that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
*/
-static int __init integrator_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int intnr = ((slot - 9) + (pin - 1)) & 3;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 6467d99fa2ee..dd56bfb351e3 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,6 +27,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -502,6 +503,10 @@ void __init pci_v3_preinit(void)
unsigned int temp;
int ret;
+ pcibios_min_io = 0x6000;
+ pcibios_min_mem = 0x00100000;
+ vga_base = PCI_MEMORY_VADDR;
+
/*
* Hook in our fault handler for PCI errors
*/
diff --git a/arch/arm/mach-iop13xx/include/mach/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
index 8e1d56289846..786fa266fab3 100644
--- a/arch/arm/mach-iop13xx/include/mach/hardware.h
+++ b/arch/arm/mach-iop13xx/include/mach/hardware.h
@@ -2,18 +2,11 @@
#define __ASM_ARCH_HARDWARE_H
#include <asm/types.h>
-#define pcibios_assign_all_busses() 1
-
#ifndef __ASSEMBLY__
-extern unsigned long iop13xx_pcibios_min_io;
-extern unsigned long iop13xx_pcibios_min_mem;
extern u16 iop13xx_dev_id(void);
extern void iop13xx_set_atu_mmr_bases(void);
#endif
-#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io)
-#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem)
-
/*
* Generic chipset bits
*
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9b5a63f5d07d..23dfaffc586c 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -30,7 +30,7 @@
extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
static int __init
-iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
{
switch (idsel) {
case 1:
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index ba3dae352a2d..251c40897dad 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -39,8 +39,6 @@ u32 iop13xx_atue_mem_base;
u32 iop13xx_atux_mem_base;
size_t iop13xx_atue_mem_size;
size_t iop13xx_atux_mem_size;
-unsigned long iop13xx_pcibios_min_io = 0;
-unsigned long iop13xx_pcibios_min_mem = 0;
EXPORT_SYMBOL(iop13xx_atue_mem_base);
EXPORT_SYMBOL(iop13xx_atux_mem_base);
@@ -390,7 +388,7 @@ static int iop13xx_atue_pci_status(int clear)
}
static int
-iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
{
WARN_ON(idsel != 0);
@@ -971,7 +969,8 @@ void __init iop13xx_pci_init(void)
__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
/* Setup the Min Address for PCI memory... */
- iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
+ pcibios_min_io = 0;
+ pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
/* if Linux is given control of an ATU
* clear out its prior configuration,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 779f924af302..6cbffbfc2bba 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -81,7 +81,7 @@ void __init em7210_map_io(void)
#define INTD IRQ_IOP32X_XINT3
static int __init
-em7210_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[][4] = {
/*
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index c6b6f9c5650d..ceef5d4dce1a 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -77,7 +77,7 @@ void __init glantank_map_io(void)
#define INTD IRQ_IOP32X_XINT3
static int __init
-glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[][4] = {
/*
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
index d559c4e6095a..48cb1b20ba91 100644
--- a/arch/arm/mach-iop32x/include/mach/hardware.h
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -18,9 +18,6 @@
* but when we read them, we convert them to virtual addresses. See
* arch/arm/plat-iop/pci.c.
*/
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
#ifndef __ASSEMBLY__
void iop32x_init_irq(void);
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index fde962c057f0..3a62514dae7c 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -103,7 +103,7 @@ void __init iq31244_map_io(void)
* EP80219/IQ31244 PCI.
*/
static int __init
-ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -139,7 +139,7 @@ static struct hw_pci ep80219_pci __initdata = {
};
static int __init
-iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 3a95950e8737..35b7e6914d3b 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -71,7 +71,7 @@ void __init iq80321_map_io(void)
* IQ80321 PCI.
*/
static int __init
-iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 626aa375915d..1a374eab6007 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -78,7 +78,7 @@ void __init n2100_map_io(void)
* N2100 PCI.
*/
static int __init
-n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
index 8c10e430655e..839285315e4e 100644
--- a/arch/arm/mach-iop33x/include/mach/hardware.h
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -18,9 +18,6 @@
* but when we read them, we convert them to virtual addresses. See
* arch/arm/mach-iop3xx/iop3xx-pci.c
*/
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
#ifndef __ASSEMBLY__
void iop33x_init_irq(void);
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c565f8d1e3a4..637c0272d5e0 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -54,7 +54,7 @@ static struct sys_timer iq80331_timer = {
* IQ80331 PCI.
*/
static int __init
-iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 36a9efb254c2..90a0436d7255 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -54,7 +54,7 @@ static struct sys_timer iq80332_timer = {
* IQ80332 PCI.
*/
static int __init
-iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 88663ab1d2ad..62c60ade5274 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -148,7 +148,8 @@ static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys);
}
-static int __init enp2611_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
index f033de4e7493..cdaf1db84003 100644
--- a/arch/arm/mach-ixp2000/include/mach/hardware.h
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -19,16 +19,8 @@
#ifndef __ASM_ARCH_HARDWARE_H__
#define __ASM_ARCH_HARDWARE_H__
-/*
- * This needs to be platform-specific?
- */
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
-
#include "ixp2000-regs.h" /* Chipset Registers */
-#define pcibios_assign_all_busses() 0
-
/*
* Platform helper functions
*/
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index dfffc1e817fa..5bad1a8419b7 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -78,7 +78,8 @@ int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
if (ixdp2x00_master_npu()) {
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index cd4c9bcff2b5..3d3cef876467 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -161,7 +161,8 @@ static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
if (ixdp2x00_master_npu()) {
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 84835b209557..be2a254f1374 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -252,7 +252,8 @@ void __init ixdp2x01_pci_preinit(void)
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
u8 bus = dev->bus->number;
u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index f797c5f538b0..f5098b306fd3 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -196,6 +196,11 @@ clear_master_aborts(void)
void __init
ixp2000_pci_preinit(void)
{
+ pci_set_flags(0);
+
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
/*
* Configure the PCI unit to properly byteswap I/O transactions,
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
index 57b508bfe280..60e55fa10238 100644
--- a/arch/arm/mach-ixp23xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -15,13 +15,9 @@
#define __ASM_ARCH_HARDWARE_H
/* PCI IO info */
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0xe0000000
#include "ixp23xx.h"
-#define pcibios_assign_all_busses() 0
-
/*
* Platform helper functions
*/
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 8dcba17c81e7..ec028e35f401 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -168,7 +168,7 @@ void __init ixdp2351_init_irq(void)
*/
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u8 bus = dev->bus->number;
u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 563819a83292..e6be5711c700 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -227,6 +227,11 @@ static void __init ixp23xx_pci_common_init(void)
void __init ixp23xx_pci_preinit(void)
{
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0xe0000000;
+
+ pci_set_flags(0);
+
ixp23xx_pci_common_init();
hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 8fe0c6273262..844551d2368b 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -56,7 +56,8 @@
#define INTC_PIN IXP23XX_GPIO_PIN_11
#define INTD_PIN IXP23XX_GPIO_PIN_12
-static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel,
+ u8 pin)
{
static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 162043ff29ff..8fea0a3c5246 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -46,7 +46,7 @@ void __init avila_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[IRQ_LINES] = {
IXP4XX_GPIO_IRQ(INTA),
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index e2e98bbb6413..2131832ee6ba 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -346,6 +346,11 @@ void __init ixp4xx_pci_preinit(void)
{
unsigned long cpuid = read_cpuid_id();
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
+ pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
+#else
+ pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
+#endif
/*
* Determine which PCI read method to use.
* Rev 0 IXP425 requires workaround.
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 37fda7d6e83d..71f5c9c60fc3 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -37,7 +37,7 @@ void __init coyote_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == SLOT0_DEVID)
return IXP4XX_GPIO_IRQ(SLOT0_INTA);
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index c7612010b3fc..0532510b5e8c 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -44,7 +44,7 @@ void __init dsmg600_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index 44ccde9d4879..d2ac803328f7 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -38,7 +38,7 @@ void __init fsg_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[IRQ_LINES] = {
IXP4XX_GPIO_IRQ(INTC),
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index fc1124168874..76581fb467c4 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -35,7 +35,8 @@ void __init gateway7001_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
if (slot == 1)
return IRQ_IXP4XX_GPIO11;
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 5f00ad224fe0..7548d9a2efe2 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -462,7 +462,7 @@ static void __init gmlr_pci_postinit(void)
}
}
-static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch(slot) {
case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 38cc0725dbd8..d68fc068c38d 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -49,7 +49,7 @@ void __init gtwx5715_pci_preinit(void)
}
-static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int rc = -1;
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index 8138371c406e..c30e7e923a73 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -17,19 +17,14 @@
#ifndef __ASM_ARCH_HARDWARE_H__
#define __ASM_ARCH_HARDWARE_H__
-#define PCIBIOS_MIN_IO 0x00001000
#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MIN_MEM 0x10000000 /* 1 GB of indirect PCI MMIO space */
#define PCIBIOS_MAX_MEM 0x4FFFFFFF
#else
-#define PCIBIOS_MIN_MEM 0x48000000 /* 64 MB of PCI MMIO space */
#define PCIBIOS_MAX_MEM 0x4BFFFFFF
#endif
#define ARCH_HAS_DMA_SET_COHERENT_MASK
-#define pcibios_assign_all_busses() 1
-
/* Register locations and bits */
#include "ixp4xx-regs.h"
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 58f400417eaf..fffd8c5e40bf 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -43,7 +43,7 @@ void __init ixdp425_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[IRQ_LINES] = {
IXP4XX_GPIO_IRQ(INTA),
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index e64f6d041488..34efe75015ec 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -31,7 +31,7 @@ void __init ixdpg425_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init ixdpg425_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 12 || slot == 13)
return IRQ_IXP4XX_GPIO7;
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index 428d1202b799..5434ccf553eb 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -41,7 +41,7 @@ void __init nas100d_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 2e85f76b950d..b57160535e47 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -38,7 +38,7 @@ void __init nslu2_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[IRQ_LINES] = {
IXP4XX_GPIO_IRQ(INTA),
diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c
index 03bdec5140a7..0bc3f34c282f 100644
--- a/arch/arm/mach-ixp4xx/vulcan-pci.c
+++ b/arch/arm/mach-ixp4xx/vulcan-pci.c
@@ -43,7 +43,7 @@ void __init vulcan_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 1)
return IXP4XX_GPIO_IRQ(INTA);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 17f3cf59a31b..f27dfcfe811b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -35,7 +35,7 @@ void __init wg302v2_pci_preinit(void)
ixp4xx_pci_preinit();
}
-static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 1)
return IRQ_IXP4XX_GPIO8;
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
index cde85283f7d3..742b74f43e41 100644
--- a/arch/arm/mach-kirkwood/include/mach/hardware.h
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -11,11 +11,4 @@
#include "kirkwood.h"
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ca294ff6d5be..74b992d810ea 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -12,6 +12,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
@@ -244,7 +245,8 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
return bus;
}
-static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus);
@@ -271,6 +273,8 @@ static void __init add_pcie_port(int index, unsigned long base)
void __init kirkwood_pcie_init(unsigned int portmask)
{
+ vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+
if (portmask & KW_PCIE0)
add_pcie_port(0, PCIE_VIRT_BASE);
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index ada92b6bed24..1338cb3e9827 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -34,7 +34,7 @@
#include "generic.h"
#ifdef CONFIG_PCI
-static int dsm320_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (slot) {
case 0:
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index c7ad09bd6ea2..e2e3cba8dcdb 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -24,7 +24,7 @@
#include "generic.h"
#ifdef CONFIG_PCI
-static int micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return KS8695_IRQ_EXTERN0;
}
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 2744fecb429c..85a3c9aa7d13 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -30,7 +30,7 @@ extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
struct ks8695_pci_cfg {
short mode;
- int (*map_irq)(struct pci_dev *, u8, u8);
+ int (*map_irq)(const struct pci_dev *, u8, u8);
};
extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index e0f911d9e021..5e0c388143da 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -42,13 +42,4 @@
#define KS8695_PCIIO_PA 0x80000000
#define KS8695_PCIIO_SIZE SZ_64K
-
-/*
- * PCI support
- */
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0
-#define PCIBIOS_MIN_MEM 0
-
#endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 5fcd082a17f9..c7c9a188d105 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -317,6 +317,9 @@ void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
return;
}
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
printk(KERN_INFO "PCI: Initialising\n");
ks8695_show_pciregs();
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index da0e6498110a..1e027514096d 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -1077,7 +1077,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
- _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+ _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index ee24dc28e93e..205b2dbb565b 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -95,6 +95,48 @@ struct platform_device lpc32xx_i2c2_device = {
},
};
+/* TSC (Touch Screen Controller) */
+
+static struct resource lpc32xx_tsc_resources[] = {
+ {
+ .start = LPC32XX_ADC_BASE,
+ .end = LPC32XX_ADC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_TS_IRQ,
+ .end = IRQ_LPC32XX_TS_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_tsc_device = {
+ .name = "ts-lpc32xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
+ .resource = lpc32xx_tsc_resources,
+};
+
+/* RTC */
+
+static struct resource lpc32xx_rtc_resources[] = {
+ {
+ .start = LPC32XX_RTC_BASE,
+ .end = LPC32XX_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_LPC32XX_RTC,
+ .end = IRQ_LPC32XX_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_rtc_device = {
+ .name = "rtc-lpc32xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
+ .resource = lpc32xx_rtc_resources,
+};
+
/*
* Returns the unique ID for the device
*/
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index f82211fd80c1..5583f52662bd 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -28,6 +28,8 @@ extern struct platform_device lpc32xx_watchdog_device;
extern struct platform_device lpc32xx_i2c0_device;
extern struct platform_device lpc32xx_i2c1_device;
extern struct platform_device lpc32xx_i2c2_device;
+extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_rtc_device;
/*
* Other arch specific structures and functions
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
deleted file mode 100644
index 9bf0637e29ce..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/clkdev.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_CLKDEV_H
-#define __ASM_ARCH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 67793a690272..56ef5f6c8116 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -77,6 +77,13 @@ config MACH_TETON_BGA
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
+config MACH_SHEEVAD
+ bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ GuruPlug Display (gplugD) Board
+
endmenu
config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 5c68382141af..b0ac942327aa 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
+obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 886e05648f08..7c6f95f29142 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -88,3 +88,18 @@ unsigned long clk_get_rate(struct clk *clk)
return rate;
}
EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk->ops->setrate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->ops->setrate(clk, rate);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 9b027d7491f5..3143e994e672 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -12,6 +12,7 @@ struct clkops {
void (*enable)(struct clk *);
void (*disable)(struct clk *);
unsigned long (*getrate)(struct clk *);
+ int (*setrate)(struct clk *, unsigned long);
};
struct clk {
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
new file mode 100644
index 000000000000..98e25d9aaab6
--- /dev/null
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-mmp/gplugd.c
+ *
+ * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/gpio.h>
+#include <mach/pxa168.h>
+#include <mach/mfp-pxa168.h>
+
+#include "common.h"
+
+static unsigned long gplugd_pin_config[] __initdata = {
+ /* UART3 */
+ GPIO8_UART3_TXD,
+ GPIO9_UART3_RXD,
+ GPIO1O_UART3_CTS,
+ GPIO11_UART3_RTS,
+
+ /* USB OTG PEN */
+ GPIO18_GPIO,
+
+ /* MMC2 */
+ GPIO28_MMC2_CMD,
+ GPIO29_MMC2_CLK,
+ GPIO30_MMC2_DAT0,
+ GPIO31_MMC2_DAT1,
+ GPIO32_MMC2_DAT2,
+ GPIO33_MMC2_DAT3,
+
+ /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
+ GPIO35_GPIO,
+ GPIO36_GPIO, /* CEC Interrupt */
+
+ /* MMC1 */
+ GPIO43_MMC1_CLK,
+ GPIO49_MMC1_CMD,
+ GPIO41_MMC1_DAT0,
+ GPIO40_MMC1_DAT1,
+ GPIO52_MMC1_DAT2,
+ GPIO51_MMC1_DAT3,
+ GPIO53_MMC1_CD,
+
+ /* LCD */
+ GPIO56_LCD_FCLK_RD,
+ GPIO57_LCD_LCLK_A0,
+ GPIO58_LCD_PCLK_WR,
+ GPIO59_LCD_DENA_BIAS,
+ GPIO60_LCD_DD0,
+ GPIO61_LCD_DD1,
+ GPIO62_LCD_DD2,
+ GPIO63_LCD_DD3,
+ GPIO64_LCD_DD4,
+ GPIO65_LCD_DD5,
+ GPIO66_LCD_DD6,
+ GPIO67_LCD_DD7,
+ GPIO68_LCD_DD8,
+ GPIO69_LCD_DD9,
+ GPIO70_LCD_DD10,
+ GPIO71_LCD_DD11,
+ GPIO72_LCD_DD12,
+ GPIO73_LCD_DD13,
+ GPIO74_LCD_DD14,
+ GPIO75_LCD_DD15,
+ GPIO76_LCD_DD16,
+ GPIO77_LCD_DD17,
+ GPIO78_LCD_DD18,
+ GPIO79_LCD_DD19,
+ GPIO80_LCD_DD20,
+ GPIO81_LCD_DD21,
+ GPIO82_LCD_DD22,
+ GPIO83_LCD_DD23,
+
+ /* GPIO */
+ GPIO84_GPIO,
+ GPIO85_GPIO,
+
+ /* Fast-Ethernet*/
+ GPIO86_TX_CLK,
+ GPIO87_TX_EN,
+ GPIO88_TX_DQ3,
+ GPIO89_TX_DQ2,
+ GPIO90_TX_DQ1,
+ GPIO91_TX_DQ0,
+ GPIO92_MII_CRS,
+ GPIO93_MII_COL,
+ GPIO94_RX_CLK,
+ GPIO95_RX_ER,
+ GPIO96_RX_DQ3,
+ GPIO97_RX_DQ2,
+ GPIO98_RX_DQ1,
+ GPIO99_RX_DQ0,
+ GPIO100_MII_MDC,
+ GPIO101_MII_MDIO,
+ GPIO103_RX_DV,
+ GPIO104_GPIO, /* Reset PHY */
+
+ /* RTC interrupt */
+ GPIO102_GPIO,
+
+ /* I2C */
+ GPIO105_CI2C_SDA,
+ GPIO106_CI2C_SCL,
+
+ /* SPI NOR Flash on SSP2 */
+ GPIO107_SSP2_RXD,
+ GPIO108_SSP2_TXD,
+ GPIO110_GPIO, /* SPI_CSn */
+ GPIO111_SSP2_CLK,
+
+ /* Select JTAG */
+ GPIO109_GPIO,
+
+ /* I2S */
+ GPIO114_I2S_FRM,
+ GPIO115_I2S_BCLK,
+ GPIO116_I2S_TXD
+};
+
+static struct i2c_board_info gplugd_i2c_board_info[] = {
+ {
+ .type = "isl1208",
+ .addr = 0x6F,
+ }
+};
+
+/* Bring PHY out of reset by setting GPIO 104 */
+static int gplugd_eth_init(void)
+{
+ if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
+ "PHY out of reset\n");
+ return -EIO;
+ }
+
+ gpio_direction_output(104, 1);
+ gpio_free(104);
+ return 0;
+}
+
+struct pxa168_eth_platform_data gplugd_eth_platform_data = {
+ .port_number = 0,
+ .phy_addr = 0,
+ .speed = 0, /* Autonagotiation */
+ .init = gplugd_eth_init,
+};
+
+static void __init select_disp_freq(void)
+{
+ /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
+ if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
+ "frequency\n");
+ } else {
+ gpio_direction_output(35, 1);
+ gpio_free(35);
+ }
+
+ if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
+ "frequency\n");
+ } else {
+ gpio_direction_output(85, 0);
+ gpio_free(85);
+ }
+}
+
+static void __init gplugd_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
+
+ select_disp_freq();
+
+ /* on-chip devices */
+ pxa168_add_uart(3);
+ pxa168_add_ssp(0);
+ pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+
+ pxa168_add_eth(&gplugd_eth_platform_data);
+}
+
+MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+ .map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = gplugd_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
deleted file mode 100644
index 2fb354e54e0d..000000000000
--- a/arch/arm/mach-mmp/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 713be155a44d..92aaa3c19d61 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -203,6 +203,10 @@
#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
/* UART */
+#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2)
+#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2)
+#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2)
#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2)
#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2)
#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
@@ -232,6 +236,22 @@
#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
+/* MMC2 */
+#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
/* LCD */
#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
@@ -269,11 +289,12 @@
#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
/* I2S */
-#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
-#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
-#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1)
-#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
-#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6)
+#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1)
+#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1)
+#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2)
+#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1)
+#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2)
/* PWM */
#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
@@ -305,4 +326,29 @@
#define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7)
#define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7)
+/* Fast Ethernet */
+#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5)
+#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5)
+#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5)
+#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5)
+#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5)
+#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5)
+#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5)
+#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5)
+#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5)
+#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5)
+#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5)
+#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5)
+#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5)
+#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5)
+#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5)
+#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
+#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
+
+/* SSP2 */
+#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4)
+#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4)
+#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4)
+#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index a52b3d2f325c..7f005843a707 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -14,9 +14,11 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <video/pxa168fb.h>
#include <plat/pxa27x_keypad.h>
#include <mach/cputype.h>
+#include <linux/pxa168_eth.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_uart3;
extern struct pxa_device_desc pxa168_device_twsi0;
extern struct pxa_device_desc pxa168_device_twsi1;
extern struct pxa_device_desc pxa168_device_pwm1;
@@ -31,6 +33,7 @@ extern struct pxa_device_desc pxa168_device_ssp5;
extern struct pxa_device_desc pxa168_device_nand;
extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
+extern struct pxa_device_desc pxa168_device_eth;
static inline int pxa168_add_uart(int id)
{
@@ -39,6 +42,7 @@ static inline int pxa168_add_uart(int id)
switch (id) {
case 1: d = &pxa168_device_uart1; break;
case 2: d = &pxa168_device_uart2; break;
+ case 3: d = &pxa168_device_uart3; break;
}
if (d == NULL)
@@ -117,4 +121,8 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
}
+static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
+{
+ return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
+}
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index f7011ef70bf5..8447ac63e28f 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -29,6 +29,7 @@
#define APMU_BUS APMU_REG(0x06c)
#define APMU_SDH2 APMU_REG(0x0e8)
#define APMU_SDH3 APMU_REG(0x0ec)
+#define APMU_ETH APMU_REG(0x0fc)
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ab9f999106c7..0156f535dae7 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -66,6 +66,7 @@ void __init pxa168_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
@@ -81,11 +82,13 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
@@ -100,6 +103,7 @@ static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
};
static int __init pxa168_init(void)
@@ -149,6 +153,7 @@ void pxa168_clear_keypad_wakeup(void)
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
@@ -163,3 +168,4 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
+PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 99833b9485cf..4e91ee6e27c8 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -51,12 +51,12 @@ static inline uint32_t timer_read(void)
{
int delay = 100;
- __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+ __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
while (delay--)
cpu_relax();
- return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+ return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
}
unsigned long long notrace sched_clock(void)
@@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
- /* disable and clear pending interrupt status */
- __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
- __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+ /*
+ * Clear pending interrupt status.
+ */
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+
+ /*
+ * Disable timer 0.
+ */
+ __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
c->event_handler(c);
+
return IRQ_HANDLED;
}
static int timer_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
- unsigned long flags, next;
+ unsigned long flags;
local_irq_save(flags);
- /* clear pending interrupt status and enable */
+ /*
+ * Disable timer 0.
+ */
+ __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
+ /*
+ * Clear and enable timer match 0 interrupt.
+ */
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
- next = timer_read() + delta;
- __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+ /*
+ * Setup new clockevent timer value.
+ */
+ __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+ /*
+ * Enable timer 0.
+ */
+ __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
local_irq_restore(flags);
+
return 0;
}
@@ -145,23 +168,26 @@ static struct clocksource cksrc = {
static void __init timer_config(void)
{
uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
- uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
- uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
- __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
- ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
+ ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+ (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
- /* free-running mode */
- __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+ /* set timer 0 to periodic mode, and timer 1 to free-running mode */
+ __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
- __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+ __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
- /* enable timer counter */
- __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
+ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+
+ /* enable timer 1 counter */
+ __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
}
static struct irqaction timer_irq = {
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index e411039ea59e..6bd37a27e5fc 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -15,6 +15,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,7 +27,17 @@
#include "common.h"
-#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24)
+#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
+ ((x < 16) ? x : 15)))
+#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
+ ((x < 16) ? x : 15)))
+
+/*
+ * 16 board interrupts -- MAX7312 GPIO expander
+ * 16 board interrupts -- PCA9575 GPIO expander
+ * 24 board interrupts -- 88PM860x PMIC
+ */
+#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 16 + 16 + 24)
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
@@ -113,6 +125,22 @@ static struct platform_device *ttc_dkb_devices[] = {
&ttc_dkb_device_onenand,
};
+static struct pca953x_platform_data max7312_data[] = {
+ {
+ .gpio_base = TTCDKB_GPIO_EXT0(0),
+ .irq_base = IRQ_BOARD_START,
+ },
+};
+
+static struct i2c_board_info ttc_dkb_i2c_info[] = {
+ {
+ .type = "max7312",
+ .addr = 0x23,
+ .irq = IRQ_GPIO(80),
+ .platform_data = &max7312_data,
+ },
+};
+
static void __init ttc_dkb_init(void)
{
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -121,6 +149,7 @@ static void __init ttc_dkb_init(void)
pxa910_add_uart(1);
/* off-chip devices */
+ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 888e92502e15..ebde97f5d5f0 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -11,6 +11,7 @@ config ARCH_MSM7X00A
select MSM_SMD
select MSM_SMD_PKG3
select CPU_V6
+ select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
@@ -22,6 +23,7 @@ config ARCH_MSM7X30
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
+ select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
@@ -33,6 +35,7 @@ config ARCH_QSD8X50
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
+ select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
@@ -44,6 +47,7 @@ config ARCH_MSM8X60
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
+ select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index b70658c5ae00..4285dfd80b6f 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -29,11 +29,3 @@ obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
-ifdef CONFIG_MSM_V2_TLMM
-ifndef CONFIG_ARCH_MSM8960
-# TODO: TLMM Mapping issues need to be resolved
-obj-y += gpio-v2.o
-endif
-else
-obj-y += gpio.o
-endif
diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c
deleted file mode 100644
index cc9c4fd7cccc..000000000000
--- a/arch/arm/mach-msm/gpio-v2.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/bitmap.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/msm_iomap.h>
-#include "gpiomux.h"
-
-/* Bits of interest in the GPIO_IN_OUT register.
- */
-enum {
- GPIO_IN = 0,
- GPIO_OUT = 1
-};
-
-/* Bits of interest in the GPIO_INTR_STATUS register.
- */
-enum {
- INTR_STATUS = 0,
-};
-
-/* Bits of interest in the GPIO_CFG register.
- */
-enum {
- GPIO_OE = 9,
-};
-
-/* Bits of interest in the GPIO_INTR_CFG register.
- * When a GPIO triggers, two separate decisions are made, controlled
- * by two separate flags.
- *
- * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS
- * register for that GPIO will be updated to reflect the triggering of that
- * gpio. If this bit is 0, this register will not be updated.
- * - Second, INTR_ENABLE controls whether an interrupt is triggered.
- *
- * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt
- * can be triggered but the status register will not reflect it.
- */
-enum {
- INTR_ENABLE = 0,
- INTR_POL_CTL = 1,
- INTR_DECT_CTL = 2,
- INTR_RAW_STATUS_EN = 3,
-};
-
-/* Codes of interest in GPIO_INTR_CFG_SU.
- */
-enum {
- TARGET_PROC_SCORPION = 4,
- TARGET_PROC_NONE = 7,
-};
-
-
-#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio)))
-#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio)))
-#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio)))
-#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio)))
-#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio)))
-
-/**
- * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
- *
- * @enabled_irqs: a bitmap used to optimize the summary-irq handler. By
- * keeping track of which gpios are unmasked as irq sources, we avoid
- * having to do readl calls on hundreds of iomapped registers each time
- * the summary interrupt fires in order to locate the active interrupts.
- *
- * @wake_irqs: a bitmap for tracking which interrupt lines are enabled
- * as wakeup sources. When the device is suspended, interrupts which are
- * not wakeup sources are disabled.
- *
- * @dual_edge_irqs: a bitmap used to track which irqs are configured
- * as dual-edge, as this is not supported by the hardware and requires
- * some special handling in the driver.
- */
-struct msm_gpio_dev {
- struct gpio_chip gpio_chip;
- DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS);
- DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS);
- DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS);
-};
-
-static DEFINE_SPINLOCK(tlmm_lock);
-
-static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
-{
- return container_of(chip, struct msm_gpio_dev, gpio_chip);
-}
-
-static inline void set_gpio_bits(unsigned n, void __iomem *reg)
-{
- writel(readl(reg) | n, reg);
-}
-
-static inline void clear_gpio_bits(unsigned n, void __iomem *reg)
-{
- writel(readl(reg) & ~n, reg);
-}
-
-static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN);
-}
-
-static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset));
-}
-
-static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- unsigned long irq_flags;
-
- spin_lock_irqsave(&tlmm_lock, irq_flags);
- clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
- spin_unlock_irqrestore(&tlmm_lock, irq_flags);
- return 0;
-}
-
-static int msm_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset,
- int val)
-{
- unsigned long irq_flags;
-
- spin_lock_irqsave(&tlmm_lock, irq_flags);
- msm_gpio_set(chip, offset, val);
- set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
- spin_unlock_irqrestore(&tlmm_lock, irq_flags);
- return 0;
-}
-
-static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return msm_gpiomux_get(chip->base + offset);
-}
-
-static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- msm_gpiomux_put(chip->base + offset);
-}
-
-static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- return MSM_GPIO_TO_INT(chip->base + offset);
-}
-
-static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq)
-{
- return irq - MSM_GPIO_TO_INT(chip->base);
-}
-
-static struct msm_gpio_dev msm_gpio = {
- .gpio_chip = {
- .base = 0,
- .ngpio = NR_GPIO_IRQS,
- .direction_input = msm_gpio_direction_input,
- .direction_output = msm_gpio_direction_output,
- .get = msm_gpio_get,
- .set = msm_gpio_set,
- .to_irq = msm_gpio_to_irq,
- .request = msm_gpio_request,
- .free = msm_gpio_free,
- },
-};
-
-/* For dual-edge interrupts in software, since the hardware has no
- * such support:
- *
- * At appropriate moments, this function may be called to flip the polarity
- * settings of both-edge irq lines to try and catch the next edge.
- *
- * The attempt is considered successful if:
- * - the status bit goes high, indicating that an edge was caught, or
- * - the input value of the gpio doesn't change during the attempt.
- * If the value changes twice during the process, that would cause the first
- * test to fail but would force the second, as two opposite
- * transitions would cause a detection no matter the polarity setting.
- *
- * The do-loop tries to sledge-hammer closed the timing hole between
- * the initial value-read and the polarity-write - if the line value changes
- * during that window, an interrupt is lost, the new polarity setting is
- * incorrect, and the first success test will fail, causing a retry.
- *
- * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c.
- */
-static void msm_gpio_update_dual_edge_pos(unsigned gpio)
-{
- int loop_limit = 100;
- unsigned val, val2, intstat;
-
- do {
- val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
- if (val)
- clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
- else
- set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
- val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
- intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS);
- if (intstat || val == val2)
- return;
- } while (loop_limit-- > 0);
- pr_err("dual-edge irq failed to stabilize, "
- "interrupts dropped. %#08x != %#08x\n",
- val, val2);
-}
-
-static void msm_gpio_irq_ack(struct irq_data *d)
-{
- int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
-
- writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio));
- if (test_bit(gpio, msm_gpio.dual_edge_irqs))
- msm_gpio_update_dual_edge_pos(gpio);
-}
-
-static void msm_gpio_irq_mask(struct irq_data *d)
-{
- int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
- unsigned long irq_flags;
-
- spin_lock_irqsave(&tlmm_lock, irq_flags);
- writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio));
- clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
- __clear_bit(gpio, msm_gpio.enabled_irqs);
- spin_unlock_irqrestore(&tlmm_lock, irq_flags);
-}
-
-static void msm_gpio_irq_unmask(struct irq_data *d)
-{
- int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
- unsigned long irq_flags;
-
- spin_lock_irqsave(&tlmm_lock, irq_flags);
- __set_bit(gpio, msm_gpio.enabled_irqs);
- set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
- writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio));
- spin_unlock_irqrestore(&tlmm_lock, irq_flags);
-}
-
-static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
- unsigned long irq_flags;
- uint32_t bits;
-
- spin_lock_irqsave(&tlmm_lock, irq_flags);
-
- bits = readl(GPIO_INTR_CFG(gpio));
-
- if (flow_type & IRQ_TYPE_EDGE_BOTH) {
- bits |= BIT(INTR_DECT_CTL);
- __irq_set_handler_locked(d->irq, handle_edge_irq);
- if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
- __set_bit(gpio, msm_gpio.dual_edge_irqs);
- else
- __clear_bit(gpio, msm_gpio.dual_edge_irqs);
- } else {
- bits &= ~BIT(INTR_DECT_CTL);
- __irq_set_handler_locked(d->irq, handle_level_irq);
- __clear_bit(gpio, msm_gpio.dual_edge_irqs);
- }
-
- if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
- bits |= BIT(INTR_POL_CTL);
- else
- bits &= ~BIT(INTR_POL_CTL);
-
- writel(bits, GPIO_INTR_CFG(gpio));
-
- if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
- msm_gpio_update_dual_edge_pos(gpio);
-
- spin_unlock_irqrestore(&tlmm_lock, irq_flags);
-
- return 0;
-}
-
-/*
- * When the summary IRQ is raised, any number of GPIO lines may be high.
- * It is the job of the summary handler to find all those GPIO lines
- * which have been set as summary IRQ lines and which are triggered,
- * and to call their interrupt handlers.
- */
-static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long i;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
- i < NR_GPIO_IRQS;
- i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) {
- if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS))
- generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip,
- i));
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
-
- if (on) {
- if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
- irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1);
- set_bit(gpio, msm_gpio.wake_irqs);
- } else {
- clear_bit(gpio, msm_gpio.wake_irqs);
- if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
- irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0);
- }
-
- return 0;
-}
-
-static struct irq_chip msm_gpio_irq_chip = {
- .name = "msmgpio",
- .irq_mask = msm_gpio_irq_mask,
- .irq_unmask = msm_gpio_irq_unmask,
- .irq_ack = msm_gpio_irq_ack,
- .irq_set_type = msm_gpio_irq_set_type,
- .irq_set_wake = msm_gpio_irq_set_wake,
-};
-
-static int __devinit msm_gpio_probe(struct platform_device *dev)
-{
- int i, irq, ret;
-
- bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
- bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS);
- bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS);
- msm_gpio.gpio_chip.label = dev->name;
- ret = gpiochip_add(&msm_gpio.gpio_chip);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) {
- irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i);
- irq_set_chip_and_handler(irq, &msm_gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(TLMM_SCSS_SUMMARY_IRQ,
- msm_summary_irq_handler);
- return 0;
-}
-
-static int __devexit msm_gpio_remove(struct platform_device *dev)
-{
- int ret = gpiochip_remove(&msm_gpio.gpio_chip);
-
- if (ret < 0)
- return ret;
-
- irq_set_handler(TLMM_SCSS_SUMMARY_IRQ, NULL);
-
- return 0;
-}
-
-static struct platform_driver msm_gpio_driver = {
- .probe = msm_gpio_probe,
- .remove = __devexit_p(msm_gpio_remove),
- .driver = {
- .name = "msmgpio",
- .owner = THIS_MODULE,
- },
-};
-
-static struct platform_device msm_device_gpio = {
- .name = "msmgpio",
- .id = -1,
-};
-
-static int __init msm_gpio_init(void)
-{
- int rc;
-
- rc = platform_driver_register(&msm_gpio_driver);
- if (!rc) {
- rc = platform_device_register(&msm_device_gpio);
- if (rc)
- platform_driver_unregister(&msm_gpio_driver);
- }
-
- return rc;
-}
-
-static void __exit msm_gpio_exit(void)
-{
- platform_device_unregister(&msm_device_gpio);
- platform_driver_unregister(&msm_gpio_driver);
-}
-
-postcore_initcall(msm_gpio_init);
-module_exit(msm_gpio_exit);
-
-MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
-MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:msmgpio");
diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
deleted file mode 100644
index 5ea273b00da8..000000000000
--- a/arch/arm/mach-msm/gpio.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/* linux/arch/arm/mach-msm/gpio.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include "gpio_hw.h"
-#include "gpiomux.h"
-
-#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
-
-#define MSM_GPIO_BANK(bank, first, last) \
- { \
- .regs = { \
- .out = MSM_GPIO_OUT_##bank, \
- .in = MSM_GPIO_IN_##bank, \
- .int_status = MSM_GPIO_INT_STATUS_##bank, \
- .int_clear = MSM_GPIO_INT_CLEAR_##bank, \
- .int_en = MSM_GPIO_INT_EN_##bank, \
- .int_edge = MSM_GPIO_INT_EDGE_##bank, \
- .int_pos = MSM_GPIO_INT_POS_##bank, \
- .oe = MSM_GPIO_OE_##bank, \
- }, \
- .chip = { \
- .base = (first), \
- .ngpio = (last) - (first) + 1, \
- .get = msm_gpio_get, \
- .set = msm_gpio_set, \
- .direction_input = msm_gpio_direction_input, \
- .direction_output = msm_gpio_direction_output, \
- .to_irq = msm_gpio_to_irq, \
- .request = msm_gpio_request, \
- .free = msm_gpio_free, \
- } \
- }
-
-#define MSM_GPIO_BROKEN_INT_CLEAR 1
-
-struct msm_gpio_regs {
- void __iomem *out;
- void __iomem *in;
- void __iomem *int_status;
- void __iomem *int_clear;
- void __iomem *int_en;
- void __iomem *int_edge;
- void __iomem *int_pos;
- void __iomem *oe;
-};
-
-struct msm_gpio_chip {
- spinlock_t lock;
- struct gpio_chip chip;
- struct msm_gpio_regs regs;
-#if MSM_GPIO_BROKEN_INT_CLEAR
- unsigned int_status_copy;
-#endif
- unsigned int both_edge_detect;
- unsigned int int_enable[2]; /* 0: awake, 1: sleep */
-};
-
-static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
- unsigned offset, unsigned on)
-{
- unsigned mask = BIT(offset);
- unsigned val;
-
- val = readl(msm_chip->regs.out);
- if (on)
- writel(val | mask, msm_chip->regs.out);
- else
- writel(val & ~mask, msm_chip->regs.out);
- return 0;
-}
-
-static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip)
-{
- int loop_limit = 100;
- unsigned pol, val, val2, intstat;
- do {
- val = readl(msm_chip->regs.in);
- pol = readl(msm_chip->regs.int_pos);
- pol = (pol & ~msm_chip->both_edge_detect) |
- (~val & msm_chip->both_edge_detect);
- writel(pol, msm_chip->regs.int_pos);
- intstat = readl(msm_chip->regs.int_status);
- val2 = readl(msm_chip->regs.in);
- if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
- return;
- } while (loop_limit-- > 0);
- printk(KERN_ERR "msm_gpio_update_both_edge_detect, "
- "failed to reach stable state %x != %x\n", val, val2);
-}
-
-static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip,
- unsigned offset)
-{
- unsigned bit = BIT(offset);
-
-#if MSM_GPIO_BROKEN_INT_CLEAR
- /* Save interrupts that already triggered before we loose them. */
- /* Any interrupt that triggers between the read of int_status */
- /* and the write to int_clear will still be lost though. */
- msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
- msm_chip->int_status_copy &= ~bit;
-#endif
- writel(bit, msm_chip->regs.int_clear);
- msm_gpio_update_both_edge_detect(msm_chip);
- return 0;
-}
-
-static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct msm_gpio_chip *msm_chip;
- unsigned long irq_flags;
-
- msm_chip = container_of(chip, struct msm_gpio_chip, chip);
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
- return 0;
-}
-
-static int
-msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct msm_gpio_chip *msm_chip;
- unsigned long irq_flags;
-
- msm_chip = container_of(chip, struct msm_gpio_chip, chip);
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- msm_gpio_write(msm_chip, offset, value);
- writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
- return 0;
-}
-
-static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct msm_gpio_chip *msm_chip;
-
- msm_chip = container_of(chip, struct msm_gpio_chip, chip);
- return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
-}
-
-static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct msm_gpio_chip *msm_chip;
- unsigned long irq_flags;
-
- msm_chip = container_of(chip, struct msm_gpio_chip, chip);
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- msm_gpio_write(msm_chip, offset, value);
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- return MSM_GPIO_TO_INT(chip->base + offset);
-}
-
-#ifdef CONFIG_MSM_GPIOMUX
-static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return msm_gpiomux_get(chip->base + offset);
-}
-
-static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- msm_gpiomux_put(chip->base + offset);
-}
-#else
-#define msm_gpio_request NULL
-#define msm_gpio_free NULL
-#endif
-
-struct msm_gpio_chip msm_gpio_chips[] = {
-#if defined(CONFIG_ARCH_MSM7X00A)
- MSM_GPIO_BANK(0, 0, 15),
- MSM_GPIO_BANK(1, 16, 42),
- MSM_GPIO_BANK(2, 43, 67),
- MSM_GPIO_BANK(3, 68, 94),
- MSM_GPIO_BANK(4, 95, 106),
- MSM_GPIO_BANK(5, 107, 121),
-#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27)
- MSM_GPIO_BANK(0, 0, 15),
- MSM_GPIO_BANK(1, 16, 42),
- MSM_GPIO_BANK(2, 43, 67),
- MSM_GPIO_BANK(3, 68, 94),
- MSM_GPIO_BANK(4, 95, 106),
- MSM_GPIO_BANK(5, 107, 132),
-#elif defined(CONFIG_ARCH_MSM7X30)
- MSM_GPIO_BANK(0, 0, 15),
- MSM_GPIO_BANK(1, 16, 43),
- MSM_GPIO_BANK(2, 44, 67),
- MSM_GPIO_BANK(3, 68, 94),
- MSM_GPIO_BANK(4, 95, 106),
- MSM_GPIO_BANK(5, 107, 133),
- MSM_GPIO_BANK(6, 134, 150),
- MSM_GPIO_BANK(7, 151, 181),
-#elif defined(CONFIG_ARCH_QSD8X50)
- MSM_GPIO_BANK(0, 0, 15),
- MSM_GPIO_BANK(1, 16, 42),
- MSM_GPIO_BANK(2, 43, 67),
- MSM_GPIO_BANK(3, 68, 94),
- MSM_GPIO_BANK(4, 95, 103),
- MSM_GPIO_BANK(5, 104, 121),
- MSM_GPIO_BANK(6, 122, 152),
- MSM_GPIO_BANK(7, 153, 164),
-#endif
-};
-
-static void msm_gpio_irq_ack(struct irq_data *d)
-{
- unsigned long irq_flags;
- struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- msm_gpio_clear_detect_status(msm_chip,
- d->irq - gpio_to_irq(msm_chip->chip.base));
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static void msm_gpio_irq_mask(struct irq_data *d)
-{
- unsigned long irq_flags;
- struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
- unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- /* level triggered interrupts are also latched */
- if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
- msm_gpio_clear_detect_status(msm_chip, offset);
- msm_chip->int_enable[0] &= ~BIT(offset);
- writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static void msm_gpio_irq_unmask(struct irq_data *d)
-{
- unsigned long irq_flags;
- struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
- unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- /* level triggered interrupts are also latched */
- if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
- msm_gpio_clear_detect_status(msm_chip, offset);
- msm_chip->int_enable[0] |= BIT(offset);
- writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- unsigned long irq_flags;
- struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
- unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
-
- if (on)
- msm_chip->int_enable[1] |= BIT(offset);
- else
- msm_chip->int_enable[1] &= ~BIT(offset);
-
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
- return 0;
-}
-
-static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- unsigned long irq_flags;
- struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
- unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
- unsigned val, mask = BIT(offset);
-
- spin_lock_irqsave(&msm_chip->lock, irq_flags);
- val = readl(msm_chip->regs.int_edge);
- if (flow_type & IRQ_TYPE_EDGE_BOTH) {
- writel(val | mask, msm_chip->regs.int_edge);
- __irq_set_handler_locked(d->irq, handle_edge_irq);
- } else {
- writel(val & ~mask, msm_chip->regs.int_edge);
- __irq_set_handler_locked(d->irq, handle_level_irq);
- }
- if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
- msm_chip->both_edge_detect |= mask;
- msm_gpio_update_both_edge_detect(msm_chip);
- } else {
- msm_chip->both_edge_detect &= ~mask;
- val = readl(msm_chip->regs.int_pos);
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
- writel(val | mask, msm_chip->regs.int_pos);
- else
- writel(val & ~mask, msm_chip->regs.int_pos);
- }
- spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
- return 0;
-}
-
-static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- int i, j, mask;
- unsigned val;
-
- for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
- struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
- val = readl(msm_chip->regs.int_status);
- val &= msm_chip->int_enable[0];
- while (val) {
- mask = val & -val;
- j = fls(mask) - 1;
- /* printk("%s %08x %08x bit %d gpio %d irq %d\n",
- __func__, v, m, j, msm_chip->chip.start + j,
- FIRST_GPIO_IRQ + msm_chip->chip.start + j); */
- val &= ~mask;
- generic_handle_irq(FIRST_GPIO_IRQ +
- msm_chip->chip.base + j);
- }
- }
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip msm_gpio_irq_chip = {
- .name = "msmgpio",
- .irq_ack = msm_gpio_irq_ack,
- .irq_mask = msm_gpio_irq_mask,
- .irq_unmask = msm_gpio_irq_unmask,
- .irq_set_wake = msm_gpio_irq_set_wake,
- .irq_set_type = msm_gpio_irq_set_type,
-};
-
-static int __init msm_init_gpio(void)
-{
- int i, j = 0;
-
- for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
- if (i - FIRST_GPIO_IRQ >=
- msm_gpio_chips[j].chip.base +
- msm_gpio_chips[j].chip.ngpio)
- j++;
- irq_set_chip_data(i, &msm_gpio_chips[j]);
- irq_set_chip_and_handler(i, &msm_gpio_irq_chip,
- handle_edge_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
- spin_lock_init(&msm_gpio_chips[i].lock);
- writel(0, msm_gpio_chips[i].regs.int_en);
- gpiochip_add(&msm_gpio_chips[i].chip);
- }
-
- irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
- irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
- irq_set_irq_wake(INT_GPIO_GROUP1, 1);
- irq_set_irq_wake(INT_GPIO_GROUP2, 2);
- return 0;
-}
-
-postcore_initcall(msm_init_gpio);
diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
deleted file mode 100644
index 6b5066038baa..000000000000
--- a/arch/arm/mach-msm/gpio_hw.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/* arch/arm/mach-msm/gpio_hw.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
-#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
-
-#include <mach/msm_iomap.h>
-
-/* see 80-VA736-2 Rev C pp 695-751
-**
-** These are actually the *shadow* gpio registers, since the
-** real ones (which allow full access) are only available to the
-** ARM9 side of the world.
-**
-** Since the _BASE need to be page-aligned when we're mapping them
-** to virtual addresses, adjust for the additional offset in these
-** macros.
-*/
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
-#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
-#else
-#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
-#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
-#endif
-
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
- defined(CONFIG_ARCH_MSM7X27)
-
-/* output value */
-#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
-#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */
-#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */
-#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
-#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */
-#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10)
-#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14)
-#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18)
-#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C)
-#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38)
-#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C)
-#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40)
-#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68)
-#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C)
-#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88)
-#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C)
-#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8)
-#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC)
-#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0)
-
-#endif
-
-#if defined(CONFIG_ARCH_QSD8X50)
-/* output value */
-#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
-#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */
-#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */
-#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
-#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */
-#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */
-#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */
-#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20)
-#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24)
-#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28)
-#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C)
-#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30)
-#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50)
-#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54)
-#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58)
-#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C)
-#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0)
-#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4)
-#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8)
-#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC)
-#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0)
-#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4)
-#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0)
-#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4)
-#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8)
-#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC)
-#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0)
-#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4)
-#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0)
-#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4)
-#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8)
-#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC)
-#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100)
-#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104)
-#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108)
-
-#endif
-
-#if defined(CONFIG_ARCH_MSM7X30)
-
-/* output value */
-#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
-#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */
-#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */
-#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
-#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */
-#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */
-#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */
-#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10)
-#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14)
-#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18)
-#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C)
-#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54)
-#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8)
-#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38)
-#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C)
-#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40)
-#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44)
-#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC)
-#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68)
-#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C)
-#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0)
-#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0)
-#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC)
-#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4)
-#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88)
-#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C)
-#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8)
-#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8)
-#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4)
-#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC)
-#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8)
-#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC)
-#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0)
-#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0)
-#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234)
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
index b178d9cb742f..00459f6ee13c 100644
--- a/arch/arm/mach-msm/gpiomux.h
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -19,6 +19,7 @@
#include <linux/bitops.h>
#include <linux/errno.h>
+#include <mach/msm_gpiomux.h>
#if defined(CONFIG_MSM_V2_TLMM)
#include "gpiomux-v2.h"
@@ -71,12 +72,6 @@ enum {
*/
extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
-/* Increment a gpio's reference count, possibly activating the line. */
-int __must_check msm_gpiomux_get(unsigned gpio);
-
-/* Decrement a gpio's reference count, possibly suspending the line. */
-int msm_gpiomux_put(unsigned gpio);
-
/* Install a new configuration to the gpio line. To avoid overwriting
* a configuration, leave the VALID bit out.
*/
@@ -94,16 +89,6 @@ int msm_gpiomux_write(unsigned gpio,
*/
void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
#else
-static inline int __must_check msm_gpiomux_get(unsigned gpio)
-{
- return -ENOSYS;
-}
-
-static inline int msm_gpiomux_put(unsigned gpio)
-{
- return -ENOSYS;
-}
-
static inline int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
gpiomux_config_t suspended)
diff --git a/arch/arm/mach-msm/include/mach/clkdev.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h
index f87a57b59534..0c7d3936e02f 100644
--- a/arch/arm/mach-msm/include/mach/clkdev.h
+++ b/arch/arm/mach-msm/include/mach/msm_gpiomux.h
@@ -9,11 +9,30 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_MSM_CLKDEV_H
-#define __ASM_ARCH_MSM_CLKDEV_H
-struct clk;
+#ifndef _LINUX_MSM_GPIOMUX_H
+#define _LINUX_MSM_GPIOMUX_H
+
+#ifdef CONFIG_MSM_GPIOMUX
+
+/* Increment a gpio's reference count, possibly activating the line. */
+int __must_check msm_gpiomux_get(unsigned gpio);
+
+/* Decrement a gpio's reference count, possibly suspending the line. */
+int msm_gpiomux_put(unsigned gpio);
+
+#else
+
+static inline int __must_check msm_gpiomux_get(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int msm_gpiomux_put(unsigned gpio)
+{
+ return -ENOSYS;
+}
-static inline int __clk_get(struct clk *clk) { return 1; }
-static inline void __clk_put(struct clk *clk) { }
#endif
+
+#endif /* _LINUX_MSM_GPIOMUX_H */
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 8f99d97615a0..94fe9fe6feb3 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -55,13 +55,11 @@
#define MSM_DMOV_PHYS 0xA9700000
#define MSM_DMOV_SIZE SZ_4K
-#define MSM_GPIO1_BASE IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS 0xA9200000
-#define MSM_GPIO1_SIZE SZ_4K
+#define MSM7X00_GPIO1_PHYS 0xA9200000
+#define MSM7X00_GPIO1_SIZE SZ_4K
-#define MSM_GPIO2_BASE IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS 0xA9300000
-#define MSM_GPIO2_SIZE SZ_4K
+#define MSM7X00_GPIO2_PHYS 0xA9300000
+#define MSM7X00_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xA8600000
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index 4d84be15955e..37694442d1bd 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -46,13 +46,11 @@
#define MSM_DMOV_PHYS 0xAC400000
#define MSM_DMOV_SIZE SZ_4K
-#define MSM_GPIO1_BASE IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS 0xAC001000
-#define MSM_GPIO1_SIZE SZ_4K
+#define MSM7X30_GPIO1_PHYS 0xAC001000
+#define MSM7X30_GPIO1_SIZE SZ_4K
-#define MSM_GPIO2_BASE IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS 0xAC101000
-#define MSM_GPIO2_SIZE SZ_4K
+#define MSM7X30_GPIO2_PHYS 0xAC101000
+#define MSM7X30_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xAB800000
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index d4143201999f..d67cd73316f4 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -46,13 +46,11 @@
#define MSM_DMOV_PHYS 0xA9700000
#define MSM_DMOV_SIZE SZ_4K
-#define MSM_GPIO1_BASE IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS 0xA9000000
-#define MSM_GPIO1_SIZE SZ_4K
+#define QSD8X50_GPIO1_PHYS 0xA9000000
+#define QSD8X50_GPIO1_SIZE SZ_4K
-#define MSM_GPIO2_BASE IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS 0xA9100000
-#define MSM_GPIO2_SIZE SZ_4K
+#define QSD8X50_GPIO2_PHYS 0xA9100000
+#define QSD8X50_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xA8600000
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 2f494b6a9d0a..4ded15238b60 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -61,5 +61,7 @@
#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000)
#define MSM_TMR_BASE IOMEM(0xF0200000)
#define MSM_TMR0_BASE IOMEM(0xF0201000)
+#define MSM_GPIO1_BASE IOMEM(0xE0003000)
+#define MSM_GPIO2_BASE IOMEM(0xE0004000)
#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index cec6ed1c91d3..140ddbbc3a8a 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -43,8 +43,8 @@ static struct map_desc msm_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, MSM7X00),
MSM_DEVICE(DMOV),
- MSM_DEVICE(GPIO1),
- MSM_DEVICE(GPIO2),
+ MSM_CHIP_DEVICE(GPIO1, MSM7X00),
+ MSM_CHIP_DEVICE(GPIO2, MSM7X00),
MSM_DEVICE(CLK_CTL),
#ifdef CONFIG_MSM_DEBUG_UART
MSM_DEVICE(DEBUG_UART),
@@ -76,8 +76,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, QSD8X50),
MSM_DEVICE(DMOV),
- MSM_DEVICE(GPIO1),
- MSM_DEVICE(GPIO2),
+ MSM_CHIP_DEVICE(GPIO1, QSD8X50),
+ MSM_CHIP_DEVICE(GPIO2, QSD8X50),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE(SIRC),
MSM_DEVICE(SCPLL),
@@ -135,8 +135,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, MSM7X30),
MSM_DEVICE(DMOV),
- MSM_DEVICE(GPIO1),
- MSM_DEVICE(GPIO2),
+ MSM_CHIP_DEVICE(GPIO1, MSM7X30),
+ MSM_CHIP_DEVICE(GPIO2, MSM7X30),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE(CLK_CTL_SH2),
MSM_DEVICE(AD5),
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
index 5d887557e123..67cab0a08e07 100644
--- a/arch/arm/mach-mv78xx0/include/mach/hardware.h
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -11,11 +11,4 @@
#include "mv78xx0.h"
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
#endif
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index f27c7d2fa9f7..c51af1cac300 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
@@ -259,7 +260,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
return bus;
}
-static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus->number);
@@ -297,6 +299,8 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
void __init mv78xx0_pcie_init(int init_port0, int init_port1)
{
+ vga_base = MV78XX0_PCIE_MEM_PHYS_BASE;
+
if (init_port0) {
add_pcie_port(0, 0, PCIE00_VIRT_BASE);
if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index f25e9d7bf0f5..b4e7c58bbb38 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -180,6 +180,7 @@ config MACH_MX53_EVK
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -203,10 +204,23 @@ config MACH_MX53_LOCO
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select LEDS_GPIO_REGISTER
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX53_ARD
+ bool "Support MX53 ARD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ help
+ Include support for MX53 ARD platform. This includes specific
+ configurations for the board and its peripherals.
+
endif # ARCH_MX53_SUPPORTED
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0b9338cec516..383e7cd3fbcb 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,12 +6,14 @@
obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa70266..68934ea8725a 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+ .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e54e4bf61cfd..11b0ff67f89d 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -41,6 +41,8 @@
#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
+#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6)
+#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5)
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -142,6 +144,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
+ /* CD/WP from controller */
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_GPIO1_1__SD1_WP,
/* SD 2 */
MX51_PAD_SD2_CMD__SD2_CMD,
@@ -150,6 +155,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
+ /* CD/WP gpio */
+ MX51_PAD_GPIO1_6__GPIO1_6,
+ MX51_PAD_GPIO1_5__GPIO1_5,
/* eCSPI1 */
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -331,6 +339,18 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
};
+static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
+ .cd_type = ESDHC_CD_CONTROLLER,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
+ .cd_gpio = BABBAGE_SD2_CD,
+ .wp_gpio = BABBAGE_SD2_WP,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_GPIO,
+};
+
/*
* Board specific initialization.
*/
@@ -349,7 +369,7 @@ static void __init mx51_babbage_init(void)
ARRAY_SIZE(mx51babbage_pads));
imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
babbage_fec_reset();
@@ -376,8 +396,8 @@ static void __init mx51_babbage_init(void)
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
+ imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index f70700dc0ec1..551daf85ff8c 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
gpio_request(EFIKAMX_PCBID2, "pcbid2");
gpio_direction_input(EFIKAMX_PCBID2);
- id = gpio_get_value(EFIKAMX_PCBID0);
- id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
- id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+ id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+ id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+ id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
switch (id) {
case 7:
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d32a87c..8a9bca22beb5 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
{
.code = KEY_POWER,
.gpio = EFIKASB_PWRKEY,
- .type = EV_PWR,
+ .type = EV_KEY,
.desc = "Power Button",
.wakeup = 1,
- .debounce_interval = 10, /* ms */
+ .active_low = 1,
},
{
.code = SW_LID,
.gpio = EFIKASB_LID,
.type = EV_SW,
.desc = "Lid Switch",
+ .active_low = 1,
},
{
- /* SW_RFKILLALL vs KEY_RFKILL ? */
- .code = SW_RFKILL_ALL,
+ .code = KEY_RFKILL,
.gpio = EFIKASB_RFKILL,
- .type = EV_SW,
+ .type = EV_KEY,
.desc = "rfkill",
+ .active_low = 1,
},
};
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
gpio_request(EFIKASB_PCBID1, "pcb id1");
gpio_direction_input(EFIKASB_PCBID1);
- id = gpio_get_value(EFIKASB_PCBID0);
- id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+ id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+ id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
switch (id) {
default:
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
new file mode 100644
index 000000000000..76a67c4a2a0b
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
+#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
+#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
+#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
+#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
+#define ARD_HOME IMX_GPIO_NR(5, 10)
+#define ARD_BACK IMX_GPIO_NR(5, 11)
+#define ARD_PROG IMX_GPIO_NR(5, 12)
+#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
+
+static iomux_v3_cfg_t mx53_ard_pads[] = {
+ /* UART1 */
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+ /* WEIM for CS1 */
+ MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
+ MX53_PAD_EIM_D16__EMI_WEIM_D_16,
+ MX53_PAD_EIM_D17__EMI_WEIM_D_17,
+ MX53_PAD_EIM_D18__EMI_WEIM_D_18,
+ MX53_PAD_EIM_D19__EMI_WEIM_D_19,
+ MX53_PAD_EIM_D20__EMI_WEIM_D_20,
+ MX53_PAD_EIM_D21__EMI_WEIM_D_21,
+ MX53_PAD_EIM_D22__EMI_WEIM_D_22,
+ MX53_PAD_EIM_D23__EMI_WEIM_D_23,
+ MX53_PAD_EIM_D24__EMI_WEIM_D_24,
+ MX53_PAD_EIM_D25__EMI_WEIM_D_25,
+ MX53_PAD_EIM_D26__EMI_WEIM_D_26,
+ MX53_PAD_EIM_D27__EMI_WEIM_D_27,
+ MX53_PAD_EIM_D28__EMI_WEIM_D_28,
+ MX53_PAD_EIM_D29__EMI_WEIM_D_29,
+ MX53_PAD_EIM_D30__EMI_WEIM_D_30,
+ MX53_PAD_EIM_D31__EMI_WEIM_D_31,
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
+ MX53_PAD_EIM_OE__EMI_WEIM_OE,
+ MX53_PAD_EIM_RW__EMI_WEIM_RW,
+ MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
+ /* SDHC1 */
+ MX53_PAD_SD1_CMD__ESDHC1_CMD,
+ MX53_PAD_SD1_CLK__ESDHC1_CLK,
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
+ MX53_PAD_GPIO_1__GPIO1_1,
+ MX53_PAD_GPIO_9__GPIO1_9,
+ /* I2C2 */
+ MX53_PAD_EIM_EB2__I2C2_SCL,
+ MX53_PAD_KEY_ROW3__I2C2_SDA,
+ /* I2C3 */
+ MX53_PAD_GPIO_3__I2C3_SCL,
+ MX53_PAD_GPIO_16__I2C3_SDA,
+ /* GPIO */
+ MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
+ MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
+ MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
+ MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
+ MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
+};
+
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
+{ \
+ .gpio = gpio_num, \
+ .type = EV_KEY, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+ .wakeup = wake, \
+}
+
+static struct gpio_keys_button ard_buttons[] = {
+ GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
+ GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
+ GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
+ GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
+ GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data ard_button_data __initconst = {
+ .buttons = ard_buttons,
+ .nbuttons = ARRAY_SIZE(ard_buttons),
+};
+
+static struct resource ard_smsc911x_resources[] = {
+ {
+ .start = MX53_CS1_64MB_BASE_ADDR,
+ .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .end = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct smsc911x_platform_config ard_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+};
+
+static struct platform_device ard_smsc_lan9220_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
+ .resource = ard_smsc911x_resources,
+ .dev = {
+ .platform_data = &ard_smsc911x_config,
+ },
+};
+
+static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
+ .cd_gpio = ARD_SD1_CD,
+ .wp_gpio = ARD_SD1_WP,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c2_data = {
+ .bitrate = 50000,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c3_data = {
+ .bitrate = 400000,
+};
+
+static void __init mx53_ard_io_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+
+ gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
+ gpio_direction_input(ARD_ETHERNET_INT_B);
+
+ gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
+ gpio_direction_output(ARD_I2CPORTEXP_B, 1);
+}
+
+/* Config CS1 settings for ethernet controller */
+static int weim_cs_config(void)
+{
+ u32 reg;
+ void __iomem *weim_base, *iomuxc_base;
+
+ weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
+ if (!weim_base)
+ return -ENOMEM;
+
+ iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
+ if (!iomuxc_base)
+ return -ENOMEM;
+
+ /* CS1 timings for LAN9220 */
+ writel(0x20001, (weim_base + 0x18));
+ writel(0x0, (weim_base + 0x1C));
+ writel(0x16000202, (weim_base + 0x20));
+ writel(0x00000002, (weim_base + 0x24));
+ writel(0x16002082, (weim_base + 0x28));
+ writel(0x00000000, (weim_base + 0x2C));
+ writel(0x00000000, (weim_base + 0x90));
+
+ /* specify 64 MB on CS1 and CS0 on GPR1 */
+ reg = readl(iomuxc_base + 0x4);
+ reg &= ~0x3F;
+ reg |= 0x1B;
+ writel(reg, (iomuxc_base + 0x4));
+
+ iounmap(iomuxc_base);
+ iounmap(weim_base);
+
+ return 0;
+}
+
+static struct platform_device *devices[] __initdata = {
+ &ard_smsc_lan9220_device,
+};
+
+static void __init mx53_ard_board_init(void)
+{
+ imx53_soc_init();
+ imx53_add_imx_uart(0, NULL);
+
+ mx53_ard_io_init();
+ weim_cs_config();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
+ imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
+ imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
+ imx_add_gpio_keys(&ard_button_data);
+}
+
+static void __init mx53_ard_timer_init(void)
+{
+ mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_ard_timer = {
+ .init = mx53_ard_timer_init,
+};
+
+MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .timer = &mx53_ard_timer,
+ .init_machine = mx53_ard_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 0d9218a6e2d2..1b417b06b736 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -35,6 +35,7 @@
#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
+#define MX53EVK_LED IMX_GPIO_NR(7, 7)
#include "crm_regs.h"
#include "devices-imx53.h"
@@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
/* ecspi chip select lines */
MX53_PAD_EIM_EB2__GPIO2_30,
MX53_PAD_EIM_D19__GPIO3_19,
+ /* LED */
+ MX53_PAD_PATA_DA_1__GPIO7_7,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
+static const struct gpio_led mx53evk_leds[] __initconst = {
+ {
+ .name = "green",
+ .default_trigger = "heartbeat",
+ .gpio = MX53EVK_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
+ .leds = mx53evk_leds,
+ .num_leds = ARRAY_SIZE(mx53evk_leds),
+};
+
static inline void mx53_evk_init_uart(void)
{
imx53_add_imx_uart(0, NULL);
@@ -135,6 +151,7 @@ static void __init mx53_evk_board_init(void)
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
imx53_add_imx2_wdt(0, NULL);
+ gpio_led_register_device(-1, &mx53evk_leds_data);
}
static void __init mx53_evk_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 359c3e248add..4e1d51d252dc 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -38,6 +38,10 @@
#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define LOCO_LED IMX_GPIO_NR(7, 7)
+#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
+#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
+#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
static iomux_v3_cfg_t mx53_loco_pads[] = {
/* FEC */
@@ -70,6 +74,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* SD1_CD */
+ MX53_PAD_EIM_DA13__GPIO3_13,
/* SD3 */
MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
@@ -163,7 +169,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_GPIO_7__SPDIF_PLOCK,
MX53_PAD_GPIO_17__SPDIF_OUT1,
/* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7,
+ MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
MX53_PAD_PATA_DA_2__GPIO7_8,
MX53_PAD_PATA_DATA5__GPIO2_5,
MX53_PAD_PATA_DATA6__GPIO2_6,
@@ -202,6 +208,19 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = {
.nbuttons = ARRAY_SIZE(loco_buttons),
};
+static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
+ .cd_gpio = LOCO_SD1_CD,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_NONE,
+};
+
+static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
+ .cd_gpio = LOCO_SD3_CD,
+ .wp_gpio = LOCO_SD3_WP,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_GPIO,
+};
+
static inline void mx53_loco_fec_reset(void)
{
int ret;
@@ -225,6 +244,19 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
.bitrate = 100000,
};
+static const struct gpio_led mx53loco_leds[] __initconst = {
+ {
+ .name = "green",
+ .default_trigger = "heartbeat",
+ .gpio = LOCO_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
+ .leds = mx53loco_leds,
+ .num_leds = ARRAY_SIZE(mx53loco_leds),
+};
+
static void __init mx53_loco_board_init(void)
{
imx53_soc_init();
@@ -237,9 +269,10 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
+ imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
imx_add_gpio_keys(&loco_button_data);
+ gpio_led_register_device(-1, &mx53loco_leds_data);
}
static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 0adeea17d123..f7bf996f463b 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
int i = 0;
pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_UPEN)
+ return 0;
+
+ reg |= MXC_PLL_DP_CTL_UPEN;
__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
/* Wait for lock */
@@ -1254,12 +1258,20 @@ DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart4_ipg_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart5_ipg_clk);
/* GPT */
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
@@ -1279,6 +1291,8 @@ DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, &ipg_perclk, NULL);
/* FEC */
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
@@ -1412,11 +1426,13 @@ DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
},
static struct clk_lookup mx51_lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ /* i.mx51 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ /* i.mx51 has the i.mx27 type fec */
+ _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
@@ -1436,7 +1452,8 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ /* i.mx51 has the i.mx35 type sdma */
+ _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
@@ -1444,10 +1461,10 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
/* i.mx51 has the i.mx35 type cspi */
_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
@@ -1460,25 +1477,36 @@ static struct clk_lookup mx51_lookups[] = {
};
static struct clk_lookup mx53_lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ /* i.mx53 has the i.mx21 type uart */
+ _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ /* i.mx53 has the i.mx25 type fec */
+ _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
/* i.mx53 has the i.mx51 type ecspi */
_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
/* i.mx53 has the i.mx25 type cspi */
_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ /* i.mx53 has the i.mx35 type sdma */
+ _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
+ _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
index 87c0c58f27a7..5e11ba7daee2 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -114,6 +114,8 @@
#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
+
#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
/* Define the bits in register CCR */
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 48f4c8cc42f5..c27fe8bb4762 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -32,3 +32,11 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[];
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
#define imx53_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
+
+extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
+#define imx53_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
+#define imx53_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 665843d6c2b2..baea6e5cddd9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -18,6 +18,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
/*
@@ -100,6 +101,43 @@ void __init mx53_init_irq(void)
tzic_init_irq(tzic_virt);
}
+static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1473,
+ .mcu_2_ata_addr = 1392,
+ .app_2_per_addr = 1033,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1251,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_platform_data imx51_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx51.bin",
+ .script_addrs = &imx51_sdma_script,
+};
+
+static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .app_2_mcu_addr = 683,
+ .mcu_2_app_addr = 747,
+ .uart_2_mcu_addr = 817,
+ .shp_2_mcu_addr = 891,
+ .mcu_2_shp_addr = 960,
+ .uartsh_2_mcu_addr = 1032,
+ .spdif_2_mcu_addr = 1100,
+ .mcu_2_spdif_addr = 1134,
+ .firi_2_mcu_addr = 1193,
+ .mcu_2_firi_addr = 1290,
+};
+
+static struct sdma_platform_data imx53_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx53.bin",
+ .script_addrs = &imx53_sdma_script,
+};
+
void __init imx51_soc_init(void)
{
/* i.mx51 has the i.mx31 type gpio */
@@ -107,6 +145,9 @@ void __init imx51_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+
+ /* i.mx51 has the i.mx35 type sdma */
+ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
}
void __init imx53_soc_init(void)
@@ -119,4 +160,7 @@ void __init imx53_soc_init(void)
mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
+
+ /* i.mx53 has the i.mx35 type sdma */
+ imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
}
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 56739c23aca7..c9209454807a 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
mdelay(10);
- return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+ return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data usbh1_config = {
@@ -260,8 +260,8 @@ static struct regulator_consumer_supply vvideo_consumers[] = {
};
static struct regulator_consumer_supply vsd_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"),
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"),
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
};
static struct regulator_consumer_supply pwgt1_consumer[] = {
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
new file mode 100644
index 000000000000..e4529af0da72
--- /dev/null
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <mach/system.h>
+#include "crm_regs.h"
+
+static struct clk *gpc_dvfs_clk;
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ clk_enable(gpc_dvfs_clk);
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
+
+ return 0;
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .enter = mx5_suspend_enter,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (!IS_ERR(gpc_dvfs_clk)) {
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+ } else
+ return -EPERM;
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 162b0b0bc356..4cd0231ee539 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -41,6 +41,7 @@ config MACH_MX23EVK
config MACH_MX28EVK
bool "Support MX28EVK Platform"
select SOC_IMX28
+ select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
@@ -60,6 +61,7 @@ config MODULE_TX28
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
config MACH_TX28
diff --git a/arch/arm/mach-mxs/include/mach/clkdev.h b/arch/arm/mach-mxs/include/mach/clkdev.h
deleted file mode 100644
index 3a8f2e3a6309..000000000000
--- a/arch/arm/mach-mxs/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_MXS_CLKDEV_H__
-#define __MACH_MXS_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 56767a5cce0e..eaaf6ff28990 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/irq.h>
#include <linux/clk.h>
@@ -29,6 +30,7 @@
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
+#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5)
#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
@@ -178,6 +180,23 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
/* slot power enable */
MX28_PAD_PWM4__GPIO_3_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led mx28evk_leds[] __initconst = {
+ {
+ .name = "GPIO-LED",
+ .default_trigger = "heartbeat",
+ .gpio = MX28EVK_GPIO_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
+ .leds = mx28evk_leds,
+ .num_leds = ARRAY_SIZE(mx28evk_leds),
};
/* fec */
@@ -385,6 +404,8 @@ static void __init mx28evk_init(void)
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &mx28evk_led_data);
}
static void __init mx28evk_timer_init(void)
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 6766a12cca7f..515a423f82cd 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -139,6 +139,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
},
};
+static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
+ .wp_gpio = -EINVAL,
+ .flags = SLOTF_4_BIT_CAPABLE,
+};
+
static void __init tx28_stk5v3_init(void)
{
mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
@@ -155,6 +160,7 @@ static void __init tx28_stk5v3_init(void)
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
+ mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
}
static void __init tx28_timer_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-nomadik/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-nuc93x/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h
deleted file mode 100644
index ea8640e4603e..000000000000
--- a/arch/arm/mach-omap1/include/mach/clkdev.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/clkdev.h
- */
-
-#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 98ba9784aa15..495b3987d461 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -44,7 +44,7 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 19d5891c48e3..57b66d590c52 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL
default y
select AEABI
select REGULATOR
- select PM
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4
@@ -266,9 +265,10 @@ config MACH_OMAP_ZOOM3
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
- bool "CompuLab CM-T35 module"
+ bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP3
default y
+ select MACH_CM_T3730
select OMAP_PACKAGE_CUS
config MACH_CM_T3517
@@ -277,6 +277,9 @@ config MACH_CM_T3517
default y
select OMAP_PACKAGE_CBB
+config MACH_CM_T3730
+ bool
+
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 933b25bb10de..c7cef44c75d4 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -22,6 +22,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
@@ -37,6 +38,7 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
@@ -51,6 +53,9 @@
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define GPIO_WIFI_PMENA 54
+#define GPIO_WIFI_IRQ 53
+
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
@@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = {
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
+static struct omap_device_pad keypad_pads[] __initdata = {
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col2.kpd_col2",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col3.kpd_col3",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col4.kpd_col4",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col5.kpd_col5",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a23.kpd_col7",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a22.kpd_col6",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_row0.kpd_row0",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row1.kpd_row1",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row2.kpd_row2",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row3.kpd_row3",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row4.kpd_row4",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row5.kpd_row5",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a18.kpd_row6",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a19.kpd_row7",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
@@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = {
.rows = 8,
.cols = 8,
};
+
+static struct omap_board_data keypad_data = {
+ .id = 1,
+ .pads = keypad_pads,
+ .pads_cnt = ARRAY_SIZE(keypad_pads),
+};
+
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
@@ -275,11 +345,40 @@ static struct platform_device sdp4430_lcd_device = {
.id = -1,
};
+static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
+ REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
+ REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
+};
+
+static struct regulator_init_data sdp4430_vbat_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply),
+ .consumer_supplies = sdp4430_vbat_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vbat_pdata = {
+ .supply_name = "VBAT",
+ .microvolts = 3750000,
+ .init_data = &sdp4430_vbat_data,
+ .gpio = -EINVAL,
+};
+
+static struct platform_device sdp4430_vbat = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp4430_vbat_pdata,
+ },
+};
+
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
+ &sdp4430_vbat,
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -315,7 +414,16 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 5,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .ocr_mask = MMC_VDD_165_195,
+ .nonremovable = true,
},
{} /* Terminator */
};
@@ -324,6 +432,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
+ },
+};
+
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
@@ -395,7 +534,33 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
+static struct twl4030_codec_data twl6040_codec = {
+ /* single-step ramp for headset and handsfree */
+ .hs_left_step = 0x0f,
+ .hs_right_step = 0x0f,
+ .hf_left_step = 0x1d,
+ .hf_right_step = 0x1d,
+};
+
+static struct twl4030_vibra_data twl6040_vibra = {
+ .vibldrv_res = 8,
+ .vibrdrv_res = 3,
+ .viblmotor_res = 10,
+ .vibrmotor_res = 10,
+ .vddvibl_uV = 0, /* fixed volt supply - VBAT */
+ .vddvibr_uV = 0, /* fixed volt supply - VBAT */
+};
+
+static struct twl4030_audio_data twl6040_audio = {
+ .codec = &twl6040_codec,
+ .vibra = &twl6040_vibra,
+ .audpwron_gpio = 127,
+ .naudint_irq = OMAP44XX_IRQ_SYS_2N,
+ .irq_base = TWL6040_CODEC_IRQ_BASE,
+};
+
static struct twl4030_platform_data sdp4430_twldata = {
+ .audio = &twl6040_audio,
/* Regulators */
.vusim = &sdp4430_vusim,
.vaux1 = &sdp4430_vaux1,
@@ -593,6 +758,41 @@ static inline void board_serial_init(void)
}
#endif
+static void omap4_sdp4430_wifi_mux_init(void)
+{
+ omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
+ OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
+
+ omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+
+}
+
+static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+ .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+ .board_ref_clock = WL12XX_REFCLOCK_26,
+ .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+};
+
+static void omap4_sdp4430_wifi_init(void)
+{
+ omap4_sdp4430_wifi_mux_init();
+ if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
+ pr_err("Error setting wl12xx data\n");
+ platform_device_register(&omap_vwlan_device);
+}
+
static void __init omap_4430sdp_init(void)
{
int status;
@@ -609,6 +809,7 @@ static void __init omap_4430sdp_init(void)
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
@@ -622,7 +823,7 @@ static void __init omap_4430sdp_init(void)
ARRAY_SIZE(sdp4430_spi_board_info));
}
- status = omap4_keyboard_init(&sdp4430_keypad_data);
+ status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 5f2b55ff04ff..933e9353cb37 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-#else
-#define board_mux NULL
#endif
static void __init am3517_crane_init_early(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 35891d49c631..3af8aab435b5 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -1,8 +1,9 @@
/*
- * board-cm-t35.c (CompuLab CM-T35 module)
+ * CompuLab CM-T35/CM-T3730 modules support
*
- * Copyright (C) 2009 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
+ * Copyright (C) 2009-2011 CompuLab, Ltd.
+ * Authors: Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -13,11 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
*/
#include <linux/kernel.h>
@@ -149,12 +145,12 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
},
{
.name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
.size = 32 * NAND_BLOCK_SIZE,
},
{
.name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
.size = MTDPART_SIZ_FULL,
},
};
@@ -433,9 +429,9 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
gpio_export(wlan_rst, 0);
udelay(10);
- gpio_set_value(wlan_rst, 0);
+ gpio_set_value_cansleep(wlan_rst, 0);
udelay(10);
- gpio_set_value(wlan_rst, 1);
+ gpio_set_value_cansleep(wlan_rst, 1);
} else {
pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
}
@@ -539,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- /* DSS */
+ /* common DSS */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
@@ -562,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -580,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+
+static void __init cm_t3x_common_dss_mux_init(int mux_mode)
+{
+ omap_mux_init_signal("dss_data18", mux_mode);
+ omap_mux_init_signal("dss_data19", mux_mode);
+ omap_mux_init_signal("dss_data20", mux_mode);
+ omap_mux_init_signal("dss_data21", mux_mode);
+ omap_mux_init_signal("dss_data22", mux_mode);
+ omap_mux_init_signal("dss_data23", mux_mode);
+}
+
+static void __init cm_t35_init_mux(void)
+{
+ omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+}
+
+static void __init cm_t3730_init_mux(void)
+{
+ omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+}
+#else
+static inline void cm_t35_init_mux(void) {}
+static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
-static void __init cm_t35_init(void)
+static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
- cm_t35_init_nand();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
@@ -602,6 +620,19 @@ static void __init cm_t35_init(void)
usbhs_init(&usbhs_bdata);
}
+static void __init cm_t35_init(void)
+{
+ cm_t3x_common_init();
+ cm_t35_init_mux();
+ cm_t35_init_nand();
+}
+
+static void __init cm_t3730_init(void)
+{
+ cm_t3x_common_init();
+ cm_t3730_init_mux();
+}
+
MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
@@ -611,3 +642,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
+
+MACHINE_START(CM_T3730, "Compulab CM-T3730")
+ .boot_params = 0x80000100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = cm_t35_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = cm_t3730_init,
+ .timer = &omap3_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 34f841112768..3ae16b4e3f52 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -60,7 +60,8 @@
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -68,14 +69,26 @@ enum {
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
+ OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
-static u8 omap3_beagle_get_rev(void)
-{
- return omap3_beagle_version;
-}
+/*
+ * Board-specific configuration
+ * Defaults to BeagleBoard-xMC
+ */
+static struct {
+ int mmc1_gpio_wp;
+ int usb_pwr_level;
+ int reset_gpio;
+ int usr_button_gpio;
+} beagle_config = {
+ .mmc1_gpio_wp = -EINVAL,
+ .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+ .reset_gpio = 129,
+ .usr_button_gpio = 4,
+};
static struct gpio omap3_beagle_rev_gpios[] __initdata = {
{ 171, GPIOF_IN, "rev_id_0" },
@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+ beagle_config.mmc1_gpio_wp = 29;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 0:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ break;
+ case 2:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
break;
default:
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
+ .gpio_wp = -EINVAL,
},
{} /* Terminator */
};
@@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int r, usb_pwr_level;
-
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- mmc[0].gpio_wp = -EINVAL;
- } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
- (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
+ int r;
+
+ if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
@@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- usb_pwr_level = GPIOF_OUT_INIT_HIGH;
- beagle_dvi_device.reset_gpio = 129;
+ /* Valid for all -xM revisions */
+ if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
@@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
} else {
- usb_pwr_level = GPIOF_OUT_INIT_LOW;
- beagle_dvi_device.reset_gpio = 170;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
+ beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
+ "nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -404,7 +424,8 @@ static struct platform_device leds_gpio = {
static struct gpio_keys_button gpio_buttons[] = {
{
.code = BTN_EXTRA,
- .gpio = 7,
+ /* Dynamically assigned depending on board */
+ .gpio = -EINVAL,
.desc = "user",
.wakeup = 1,
},
@@ -468,25 +489,24 @@ static void __init beagle_opp_init(void)
return;
}
- /* Custom OPP enabled for XM */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
- struct omap_hwmod *dh = omap_hwmod_lookup("iva");
- struct device *dev;
+ /* Custom OPP enabled for all xM versions */
+ if (cpu_is_omap3630()) {
+ struct device *mpu_dev, *iva_dev;
- if (!mh || !dh) {
+ mpu_dev = omap2_get_mpuss_device();
+ iva_dev = omap2_get_iva_device();
+
+ if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
- __func__, mh, dh);
+ __func__, mpu_dev, iva_dev);
return;
}
/* Enable MPU 1GHz and lower opps */
- dev = &mh->od->pdev.dev;
- r = opp_enable(dev, 800000000);
+ r = opp_enable(mpu_dev, 800000000);
/* TODO: MPU 1GHz needs SR and ABB */
/* Enable IVA 800MHz and lower opps */
- dev = &dh->od->pdev.dev;
- r |= opp_enable(dev, 660000000);
+ r |= opp_enable(iva_dev, 660000000);
/* TODO: DSP 800MHz needs SR and ABB */
if (r) {
pr_err("%s: failed to enable higher opp %d\n",
@@ -495,10 +515,8 @@ static void __init beagle_opp_init(void)
* Cleanup - disable the higher freqs - we dont care
* about the results
*/
- dev = &mh->od->pdev.dev;
- opp_disable(dev, 800000000);
- dev = &dh->od->pdev.dev;
- opp_disable(dev, 660000000);
+ opp_disable(mpu_dev, 800000000);
+ opp_disable(iva_dev, 660000000);
}
}
return;
@@ -509,6 +527,9 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
+
+ gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
+
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f1f18d03d24c..f949a9954d76 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -519,7 +519,6 @@ static void __init overo_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
- overo_ads7846_init();
overo_init_smsc911x();
overo_display_init();
overo_init_led();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index bdb24db36004..5a886cd2c598 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -39,6 +39,7 @@
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
+#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
@@ -53,6 +54,7 @@
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
+#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
@@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
};
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ }, {
+ .chan_nr = 1,
+ .led_current = 50,
+ }, {
+ .chan_nr = 2,
+ .led_current = 50,
+ }, {
+ .chan_nr = 3,
+ .led_current = 50,
+ }, {
+ .chan_nr = 4,
+ .led_current = 50,
+ }, {
+ .chan_nr = 5,
+ .led_current = 50,
+ }, {
+ .chan_nr = 6,
+ .led_current = 50,
+ }, {
+ .chan_nr = 7,
+ .led_current = 50,
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ }
+};
+
+static int rx51_lp5523_setup(void)
+{
+ return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+ "lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+ gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+ gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+ .led_config = rx51_lp5523_led_config,
+ .num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_AUTO,
+ .setup_resources = rx51_lp5523_setup,
+ .release_resources = rx51_lp5523_release,
+ .enable = rx51_lp5523_enable,
+};
+#endif
+
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
@@ -358,6 +418,10 @@ static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
+static struct regulator_consumer_supply rx51_vaux2_supply[] = {
+ REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
+};
+
static struct regulator_consumer_supply rx51_vaux3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
@@ -419,6 +483,8 @@ static struct regulator_init_data rx51_vaux2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply),
+ .consumer_supplies = rx51_vaux2_supply,
};
/* VAUX3 - adds more power to VIO_18 rail */
@@ -495,6 +561,32 @@ static struct regulator_init_data rx51_vmmc2 = {
.consumer_supplies = rx51_vmmc2_supplies,
};
+static struct regulator_init_data rx51_vpll1 = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vpll2 = {
+ .constraints = {
+ .name = "VSDI_CSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct regulator_init_data rx51_vsim = {
.constraints = {
.name = "VMMC2_IO_18",
@@ -524,6 +616,43 @@ static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies,
};
+static struct regulator_init_data rx51_vintana1 = {
+ .constraints = {
+ .name = "VINTANA1",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintana2 = {
+ .constraints = {
+ .name = "VINTANA2",
+ .min_uV = 2750000,
+ .max_uV = 2750000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintdig = {
+ .constraints = {
+ .name = "VINTDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
@@ -741,11 +870,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
.resource_config = twl4030_rconfig,
};
-struct twl4030_codec_vibra_data rx51_vibra_data __initdata = {
+struct twl4030_vibra_data rx51_vibra_data __initdata = {
.coexist = 0,
};
-struct twl4030_codec_data rx51_codec_data __initdata = {
+struct twl4030_audio_data rx51_audio_data __initdata = {
.audio_mclk = 26000000,
.vibra = &rx51_vibra_data,
};
@@ -755,13 +884,18 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.power = &rx51_t2scripts_data,
- .codec = &rx51_codec_data,
+ .audio = &rx51_audio_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
@@ -800,6 +934,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+ {
+ I2C_BOARD_INFO("lp5523", 0x32),
+ .platform_data = &rx51_lp5523_platform_data,
+ },
+#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
.platform_data = &rx51_tpa6130a2_data,
@@ -950,6 +1090,7 @@ error:
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
+ regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 6402e781c458..369c2eb7715b 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -23,6 +23,7 @@
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
#define ZOOM_QUADUART_GPIO 102
+#define ZOOM_QUADUART_RST_GPIO 152
#define QUART_CLK 1843200
#define DEBUG_BASE 0x08000000
#define ZOOM_ETHR_START DEBUG_BASE
@@ -67,6 +68,14 @@ static inline void __init zoom_init_quaduart(void)
unsigned long cs_mem_base;
int quart_gpio = 0;
+ if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
+ GPIOF_OUT_INIT_LOW,
+ "TL16CP754C GPIO") < 0) {
+ pr_err("Failed to request GPIO%d for TL16CP754C\n",
+ ZOOM_QUADUART_RST_GPIO);
+ return;
+ }
+
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 13a644233667..6d0aa4fcb7c3 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -274,12 +274,12 @@ static int __init omap_i2c_init(void)
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
if (machine_is_omap_zoom2()) {
- struct twl4030_codec_audio_data *audio_data;
- audio_data = zoom_twldata.codec->audio;
+ struct twl4030_codec_data *codec_data;
+ codec_data = zoom_twldata.audio->codec;
- audio_data->ramp_delay_value = 3; /* 161 ms */
- audio_data->hs_extmute = 1;
- audio_data->set_hs_extmute = zoom2_set_hs_extmute;
+ codec_data->ramp_delay_value = 3; /* 161 ms */
+ codec_data->hs_extmute = 1;
+ codec_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 180299e4a838..1f3481f8d695 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -38,6 +38,14 @@
u8 cpu_mask;
/*
+ * clkdm_control: if true, then when a clock is enabled in the
+ * hardware, its clockdomain will first be enabled; and when a clock
+ * is disabled in the hardware, its clockdomain will be disabled
+ * afterwards.
+ */
+static bool clkdm_control = true;
+
+/*
* OMAP2+ specific clock functions
*/
@@ -100,6 +108,19 @@ void omap2_init_clk_clkdm(struct clk *clk)
}
/**
+ * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
+ *
+ * Prevent the OMAP clock code from calling into the clockdomain code
+ * when a hardware clock in that clockdomain is enabled or disabled.
+ * Intended to be called at init time from omap*_clk_init(). No
+ * return value.
+ */
+void __init omap2_clk_disable_clkdm_control(void)
+{
+ clkdm_control = false;
+}
+
+/**
* omap2_clk_dflt_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -268,7 +289,7 @@ void omap2_clk_disable(struct clk *clk)
clk->ops->disable(clk);
}
- if (clk->clkdm)
+ if (clkdm_control && clk->clkdm)
clkdm_clk_disable(clk->clkdm, clk);
if (clk->parent)
@@ -308,7 +329,7 @@ int omap2_clk_enable(struct clk *clk)
}
}
- if (clk->clkdm) {
+ if (clkdm_control && clk->clkdm) {
ret = clkdm_clk_enable(clk->clkdm, clk);
if (ret) {
WARN(1, "clock: %s: could not enable clockdomain %s: "
@@ -330,7 +351,7 @@ int omap2_clk_enable(struct clk *clk)
return 0;
oce_err3:
- if (clk->clkdm)
+ if (clkdm_control && clk->clkdm)
clkdm_clk_disable(clk->clkdm, clk);
oce_err2:
if (clk->parent)
@@ -453,6 +474,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
if (IS_ERR_VALUE(r)) {
WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
mpurate_ck->name, mpurate, r);
+ clk_put(mpurate_ck);
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index e10ff2b54844..48ac568881bd 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,6 +16,8 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
+#include <linux/kernel.h>
+
#include <plat/clock.h>
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
@@ -72,6 +74,7 @@ void omap2_clk_disable_unused(struct clk *clk);
#endif
void omap2_init_clk_clkdm(struct clk *clk);
+void __init omap2_clk_disable_clkdm_control(void);
/* clkt_clksel.c public functions */
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 2926d028b6e9..debc040872f1 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1805,9 +1805,9 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gfx_ick", &gfx_ick, CK_242X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_242X),
- CLK("omapdss_dss", "fck", &dss1_fck, CK_242X),
- CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_242X),
- CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_242X),
+ CLK(NULL, "dss1_fck", &dss1_fck, CK_242X),
+ CLK(NULL, "dss2_fck", &dss2_fck, CK_242X),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X),
@@ -1844,13 +1844,13 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_242X),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_242X),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_242X),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_242X),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_242X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_242X),
CLK(NULL, "uart2_ick", &uart2_ick, CK_242X),
@@ -1860,7 +1860,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_242X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
- CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_242X),
+ CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
@@ -1880,11 +1880,11 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
- CLK("omap_hdq.1", "fck", &hdq_fck, CK_242X),
+ CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X),
- CLK("omap_i2c.1", "fck", &i2c1_fck, CK_242X),
+ CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X),
- CLK("omap_i2c.2", "fck", &i2c2_fck, CK_242X),
+ CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_242X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 0c79d39e3021..96a942e42db1 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1895,9 +1895,9 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_243X),
- CLK("omapdss_dss", "fck", &dss1_fck, CK_243X),
- CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_243X),
- CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_243X),
+ CLK(NULL, "dss1_fck", &dss1_fck, CK_243X),
+ CLK(NULL, "dss2_fck", &dss2_fck, CK_243X),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X),
@@ -1934,21 +1934,21 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
+ CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
+ CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
- CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
+ CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
+ CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_243X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_243X),
CLK(NULL, "uart2_ick", &uart2_ick, CK_243X),
@@ -1958,7 +1958,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_243X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
- CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X),
+ CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
@@ -1975,9 +1975,9 @@ static struct omap_clk omap2430_clks[] = {
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X),
- CLK("omap_i2c.1", "fck", &i2chs1_fck, CK_243X),
+ CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X),
- CLK("omap_i2c.2", "fck", &i2chs2_fck, CK_243X),
+ CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_243X),
@@ -1990,9 +1990,9 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X),
- CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_243X),
+ CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X),
CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X),
- CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_243X),
+ CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 75b119bd9cda..b9b844683147 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = {
.name = "wdt1_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -3289,25 +3291,25 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
- CLK("omap_hsmmc.2", "fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_3XXX),
+ CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX),
CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX),
- CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_3XXX),
- CLK("omap_i2c.3", "fck", &i2c3_fck, CK_3XXX),
- CLK("omap_i2c.2", "fck", &i2c2_fck, CK_3XXX),
- CLK("omap_i2c.1", "fck", &i2c1_fck, CK_3XXX),
- CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_3XXX),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_3XXX),
+ CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX),
+ CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX),
+ CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX),
+ CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX),
+ CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX),
CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX),
- CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_3XXX),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_3XXX),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_3XXX),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_3XXX),
+ CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX),
+ CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX),
CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX),
CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX),
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX),
- CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
+ CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
@@ -3356,11 +3358,11 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX),
CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX),
CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX),
- CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
- CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("omapdss_dss", "tv_clk", &dss_tv_fck, CK_3XXX),
- CLK("omapdss_dss", "video_clk", &dss_96m_fck, CK_3XXX),
- CLK("omapdss_dss", "sys_clk", &dss2_alwon_fck, CK_3XXX),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX),
+ CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX),
+ CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX),
CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1),
CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX),
@@ -3385,7 +3387,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX),
CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX),
- CLK("omap_wdt", "fck", &wdt2_fck, CK_3XXX),
+ CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX),
CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX),
CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX),
CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
@@ -3436,9 +3438,9 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_3XXX),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_3XXX),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_3XXX),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX),
+ CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX),
+ CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX),
CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX),
CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX),
CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 044df38f65ce..c0b6fbda3408 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1397,6 +1397,40 @@ static struct clk dss_dss_clk = {
.recalc = &followparent_recalc,
};
+static const struct clksel_rate div3_8to32_rates[] = {
+ { .div = 8, .val = 0, .flags = RATE_IN_44XX },
+ { .div = 16, .val = 1, .flags = RATE_IN_44XX },
+ { .div = 32, .val = 2, .flags = RATE_IN_44XX },
+ { .div = 0 },
+};
+
+static const struct clksel div_ts_div[] = {
+ { .parent = &l4_wkup_clk_mux_ck, .rates = div3_8to32_rates },
+ { .parent = NULL },
+};
+
+static struct clk div_ts_ck = {
+ .name = "div_ts_ck",
+ .parent = &l4_wkup_clk_mux_ck,
+ .clksel = div_ts_div,
+ .clksel_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
+ .clksel_mask = OMAP4430_CLKSEL_24_25_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk bandgap_ts_fclk = {
+ .name = "bandgap_ts_fclk",
+ .ops = &clkops_omap2_dflt,
+ .enable_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
+ .enable_bit = OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &div_ts_ck,
+ .recalc = &followparent_recalc,
+};
+
static struct clk dss_48mhz_clk = {
.name = "dss_48mhz_clk",
.ops = &clkops_omap2_dflt,
@@ -1605,6 +1639,7 @@ static struct clk gpmc_ick = {
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_2_clkdm",
.parent = &l3_div_ck,
.recalc = &followparent_recalc,
@@ -2773,19 +2808,39 @@ static struct clk trace_clk_div_ck = {
/* SCRM aux clk nodes */
-static const struct clksel auxclk_sel[] = {
+static const struct clksel auxclk_src_sel[] = {
{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
{ .parent = NULL },
};
-static struct clk auxclk0_ck = {
- .name = "auxclk0_ck",
+static const struct clksel_rate div16_1to16_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_4430 },
+ { .div = 2, .val = 1, .flags = RATE_IN_4430 },
+ { .div = 3, .val = 2, .flags = RATE_IN_4430 },
+ { .div = 4, .val = 3, .flags = RATE_IN_4430 },
+ { .div = 5, .val = 4, .flags = RATE_IN_4430 },
+ { .div = 6, .val = 5, .flags = RATE_IN_4430 },
+ { .div = 7, .val = 6, .flags = RATE_IN_4430 },
+ { .div = 8, .val = 7, .flags = RATE_IN_4430 },
+ { .div = 9, .val = 8, .flags = RATE_IN_4430 },
+ { .div = 10, .val = 9, .flags = RATE_IN_4430 },
+ { .div = 11, .val = 10, .flags = RATE_IN_4430 },
+ { .div = 12, .val = 11, .flags = RATE_IN_4430 },
+ { .div = 13, .val = 12, .flags = RATE_IN_4430 },
+ { .div = 14, .val = 13, .flags = RATE_IN_4430 },
+ { .div = 15, .val = 14, .flags = RATE_IN_4430 },
+ { .div = 16, .val = 15, .flags = RATE_IN_4430 },
+ { .div = 0 },
+};
+
+static struct clk auxclk0_src_ck = {
+ .name = "auxclk0_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK0,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2793,12 +2848,29 @@ static struct clk auxclk0_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
-static struct clk auxclk1_ck = {
- .name = "auxclk1_ck",
+static const struct clksel auxclk0_sel[] = {
+ { .parent = &auxclk0_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk0_ck = {
+ .name = "auxclk0_ck",
+ .parent = &auxclk0_src_ck,
+ .clksel = auxclk0_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK0,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk auxclk1_src_ck = {
+ .name = "auxclk1_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK1,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2806,12 +2878,29 @@ static struct clk auxclk1_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
-static struct clk auxclk2_ck = {
- .name = "auxclk2_ck",
+static const struct clksel auxclk1_sel[] = {
+ { .parent = &auxclk1_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk1_ck = {
+ .name = "auxclk1_ck",
+ .parent = &auxclk1_src_ck,
+ .clksel = auxclk1_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK1,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk auxclk2_src_ck = {
+ .name = "auxclk2_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK2,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2819,12 +2908,29 @@ static struct clk auxclk2_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
-static struct clk auxclk3_ck = {
- .name = "auxclk3_ck",
+static const struct clksel auxclk2_sel[] = {
+ { .parent = &auxclk2_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk2_ck = {
+ .name = "auxclk2_ck",
+ .parent = &auxclk2_src_ck,
+ .clksel = auxclk2_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK2,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk auxclk3_src_ck = {
+ .name = "auxclk3_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK3,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2832,12 +2938,29 @@ static struct clk auxclk3_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
-static struct clk auxclk4_ck = {
- .name = "auxclk4_ck",
+static const struct clksel auxclk3_sel[] = {
+ { .parent = &auxclk3_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk3_ck = {
+ .name = "auxclk3_ck",
+ .parent = &auxclk3_src_ck,
+ .clksel = auxclk3_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK3,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk auxclk4_src_ck = {
+ .name = "auxclk4_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK4,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2845,12 +2968,29 @@ static struct clk auxclk4_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
-static struct clk auxclk5_ck = {
- .name = "auxclk5_ck",
+static const struct clksel auxclk4_sel[] = {
+ { .parent = &auxclk4_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk4_ck = {
+ .name = "auxclk4_ck",
+ .parent = &auxclk4_src_ck,
+ .clksel = auxclk4_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK4,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk auxclk5_src_ck = {
+ .name = "auxclk5_src_ck",
.parent = &sys_clkin_ck,
.init = &omap2_init_clksel_parent,
.ops = &clkops_omap2_dflt,
- .clksel = auxclk_sel,
+ .clksel = auxclk_src_sel,
.clksel_reg = OMAP4_SCRM_AUXCLK5,
.clksel_mask = OMAP4_SRCSELECT_MASK,
.recalc = &omap2_clksel_recalc,
@@ -2858,6 +2998,23 @@ static struct clk auxclk5_ck = {
.enable_bit = OMAP4_ENABLE_SHIFT,
};
+static const struct clksel auxclk5_sel[] = {
+ { .parent = &auxclk5_src_ck, .rates = div16_1to16_rates },
+ { .parent = NULL },
+};
+
+static struct clk auxclk5_ck = {
+ .name = "auxclk5_ck",
+ .parent = &auxclk5_src_ck,
+ .clksel = auxclk5_sel,
+ .clksel_reg = OMAP4_SCRM_AUXCLK5,
+ .clksel_mask = OMAP4_CLKDIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
static const struct clksel auxclkreq_sel[] = {
{ .parent = &auxclk0_ck, .rates = div_1_0_rates },
{ .parent = &auxclk1_ck, .rates = div_1_1_rates },
@@ -3028,14 +3185,16 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "aes2_fck", &aes2_fck, CK_443X),
CLK(NULL, "aess_fck", &aess_fck, CK_443X),
CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X),
+ CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X),
CLK(NULL, "des3des_fck", &des3des_fck, CK_443X),
+ CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X),
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
- CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
- CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
- CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
- CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
+ CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X),
+ CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
+ CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
+ CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
@@ -3056,12 +3215,12 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X),
CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X),
CLK(NULL, "gpu_fck", &gpu_fck, CK_443X),
- CLK("omap2_hdq.0", "fck", &hdq1w_fck, CK_443X),
+ CLK(NULL, "hdq1w_fck", &hdq1w_fck, CK_443X),
CLK(NULL, "hsi_fck", &hsi_fck, CK_443X),
- CLK("omap_i2c.1", "fck", &i2c1_fck, CK_443X),
- CLK("omap_i2c.2", "fck", &i2c2_fck, CK_443X),
- CLK("omap_i2c.3", "fck", &i2c3_fck, CK_443X),
- CLK("omap_i2c.4", "fck", &i2c4_fck, CK_443X),
+ CLK(NULL, "i2c1_fck", &i2c1_fck, CK_443X),
+ CLK(NULL, "i2c2_fck", &i2c2_fck, CK_443X),
+ CLK(NULL, "i2c3_fck", &i2c3_fck, CK_443X),
+ CLK(NULL, "i2c4_fck", &i2c4_fck, CK_443X),
CLK(NULL, "ipu_fck", &ipu_fck, CK_443X),
CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X),
CLK(NULL, "iss_fck", &iss_fck, CK_443X),
@@ -3072,23 +3231,23 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X),
CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X),
CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_443X),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_443X),
CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_443X),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_443X),
CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_443X),
+ CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_443X),
CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_443X),
+ CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_443X),
CLK(NULL, "mcpdm_fck", &mcpdm_fck, CK_443X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_443X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_443X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_443X),
- CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_443X),
- CLK("omap_hsmmc.0", "fck", &mmc1_fck, CK_443X),
- CLK("omap_hsmmc.1", "fck", &mmc2_fck, CK_443X),
- CLK("omap_hsmmc.2", "fck", &mmc3_fck, CK_443X),
- CLK("omap_hsmmc.3", "fck", &mmc4_fck, CK_443X),
- CLK("omap_hsmmc.4", "fck", &mmc5_fck, CK_443X),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_443X),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_443X),
+ CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_443X),
+ CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_443X),
+ CLK(NULL, "mmc1_fck", &mmc1_fck, CK_443X),
+ CLK(NULL, "mmc2_fck", &mmc2_fck, CK_443X),
+ CLK(NULL, "mmc3_fck", &mmc3_fck, CK_443X),
+ CLK(NULL, "mmc4_fck", &mmc4_fck, CK_443X),
+ CLK(NULL, "mmc5_fck", &mmc5_fck, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X),
CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X),
@@ -3145,21 +3304,27 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "usim_ck", &usim_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "usim_fck", &usim_fck, CK_443X),
- CLK("omap_wdt", "fck", &wd_timer2_fck, CK_443X),
+ CLK(NULL, "wd_timer2_fck", &wd_timer2_fck, CK_443X),
CLK(NULL, "wd_timer3_fck", &wd_timer3_fck, CK_443X),
CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X),
CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X),
+ CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X),
CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X),
- CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X),
- CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X),
- CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X),
- CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X),
- CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X),
+ CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X),
+ CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X),
CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X),
+ CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X),
+ CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X),
CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X),
+ CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X),
+ CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X),
CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X),
+ CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X),
+ CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X),
CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X),
+ CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X),
+ CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X),
CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X),
CLK(NULL, "gpt1_ick", &dummy_ck, CK_443X),
@@ -3208,10 +3373,22 @@ int __init omap4xxx_clk_init(void)
if (cpu_is_omap44xx()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
+ } else if (cpu_is_omap446x()) {
+ cpu_mask = RATE_IN_4460;
+ cpu_clkflg = CK_446X;
+ } else {
+ return 0;
}
clk_init(&omap2_clk_functions);
+ /*
+ * Must stay commented until all OMAP SoC drivers are
+ * converted to runtime PM, or drivers may start crashing
+ *
+ * omap2_clk_disable_clkdm_control();
+ */
+
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 6cb6c03293df..8f0890685d7b 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1,8 +1,8 @@
/*
* OMAP2/3/4 clockdomain framework functions
*
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Nokia Corporation
*
* Written by Paul Walmsley and Jouni Högander
* Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
@@ -92,6 +92,8 @@ static int _clkdm_register(struct clockdomain *clkdm)
pwrdm_add_clkdm(pwrdm, clkdm);
+ spin_lock_init(&clkdm->lock);
+
pr_debug("clockdomain: registered %s\n", clkdm->name);
return 0;
@@ -690,6 +692,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
*/
int clkdm_sleep(struct clockdomain *clkdm)
{
+ int ret;
+ unsigned long flags;
+
if (!clkdm)
return -EINVAL;
@@ -704,7 +709,11 @@ int clkdm_sleep(struct clockdomain *clkdm)
pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
- return arch_clkdm->clkdm_sleep(clkdm);
+ spin_lock_irqsave(&clkdm->lock, flags);
+ clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
+ ret = arch_clkdm->clkdm_sleep(clkdm);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
+ return ret;
}
/**
@@ -718,6 +727,9 @@ int clkdm_sleep(struct clockdomain *clkdm)
*/
int clkdm_wakeup(struct clockdomain *clkdm)
{
+ int ret;
+ unsigned long flags;
+
if (!clkdm)
return -EINVAL;
@@ -732,7 +744,12 @@ int clkdm_wakeup(struct clockdomain *clkdm)
pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
- return arch_clkdm->clkdm_wakeup(clkdm);
+ spin_lock_irqsave(&clkdm->lock, flags);
+ clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
+ ret = arch_clkdm->clkdm_wakeup(clkdm);
+ ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
+ return ret;
}
/**
@@ -747,6 +764,8 @@ int clkdm_wakeup(struct clockdomain *clkdm)
*/
void clkdm_allow_idle(struct clockdomain *clkdm)
{
+ unsigned long flags;
+
if (!clkdm)
return;
@@ -762,8 +781,11 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
clkdm->name);
+ spin_lock_irqsave(&clkdm->lock, flags);
+ clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_allow_idle(clkdm);
pwrdm_clkdm_state_switch(clkdm);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
}
/**
@@ -777,6 +799,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
*/
void clkdm_deny_idle(struct clockdomain *clkdm)
{
+ unsigned long flags;
+
if (!clkdm)
return;
@@ -792,11 +816,91 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
clkdm->name);
+ spin_lock_irqsave(&clkdm->lock, flags);
+ clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_deny_idle(clkdm);
+ pwrdm_state_switch(clkdm->pwrdm.ptr);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
+}
+
+/**
+ * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm currently has
+ * hardware-supervised idle enabled, or false if it does not or if
+ * @clkdm is NULL. It is only valid to call this function after
+ * clkdm_init() has been called. This function does not actually read
+ * bits from the hardware; it instead tests an in-memory flag that is
+ * changed whenever the clockdomain code changes the auto-idle mode.
+ */
+bool clkdm_in_hwsup(struct clockdomain *clkdm)
+{
+ bool ret;
+ unsigned long flags;
+
+ if (!clkdm)
+ return false;
+
+ spin_lock_irqsave(&clkdm->lock, flags);
+ ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
+ spin_unlock_irqrestore(&clkdm->lock, flags);
+
+ return ret;
+}
+
+/* Clockdomain-to-clock/hwmod framework interface code */
+
+static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
+{
+ unsigned long flags;
+
+ if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
+ return -EINVAL;
+
+ /*
+ * For arch's with no autodeps, clkcm_clk_enable
+ * should be called for every clock instance or hwmod that is
+ * enabled, so the clkdm can be force woken up.
+ */
+ if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+ return 0;
+
+ spin_lock_irqsave(&clkdm->lock, flags);
+ arch_clkdm->clkdm_clk_enable(clkdm);
+ pwrdm_wait_transition(clkdm->pwrdm.ptr);
+ pwrdm_clkdm_state_switch(clkdm);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
+
+ pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+
+ return 0;
}
+static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
+{
+ unsigned long flags;
+
+ if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+ return -EINVAL;
+
+ if (atomic_read(&clkdm->usecount) == 0) {
+ WARN_ON(1); /* underflow */
+ return -ERANGE;
+ }
+
+ if (atomic_dec_return(&clkdm->usecount) > 0)
+ return 0;
+
+ spin_lock_irqsave(&clkdm->lock, flags);
+ arch_clkdm->clkdm_clk_disable(clkdm);
+ pwrdm_clkdm_state_switch(clkdm);
+ spin_unlock_irqrestore(&clkdm->lock, flags);
-/* Clockdomain-to-clock framework interface code */
+ pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+
+ return 0;
+}
/**
* clkdm_clk_enable - add an enabled downstream clock to this clkdm
@@ -819,25 +923,10 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clk)
return -EINVAL;
- if (!arch_clkdm || !arch_clkdm->clkdm_clk_enable)
- return -EINVAL;
-
- if (atomic_inc_return(&clkdm->usecount) > 1)
- return 0;
-
- /* Clockdomain now has one enabled downstream clock */
-
- pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
- clk->name);
-
- arch_clkdm->clkdm_clk_enable(clkdm);
- pwrdm_wait_transition(clkdm->pwrdm.ptr);
- pwrdm_clkdm_state_switch(clkdm);
-
- return 0;
+ return _clkdm_clk_hwmod_enable(clkdm);
}
/**
@@ -850,9 +939,8 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
* clockdomain usecount goes to 0, put the clockdomain to sleep
* (software-supervised mode) or remove the clkdm autodependencies
* (hardware-supervised mode). Returns -EINVAL if passed null
- * pointers; -ERANGE if the @clkdm usecount underflows and debugging
- * is enabled; or returns 0 upon success or if the clockdomain is in
- * hwsup idle mode.
+ * pointers; -ERANGE if the @clkdm usecount underflows; or returns 0
+ * upon success or if the clockdomain is in hwsup idle mode.
*/
int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
{
@@ -861,30 +949,72 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clk)
return -EINVAL;
- if (!arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+ return _clkdm_clk_hwmod_disable(clkdm);
+}
+
+/**
+ * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm
+ * @clkdm: struct clockdomain *
+ * @oh: struct omap_hwmod * of the enabled downstream hwmod
+ *
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @oh is enabled. Intended to be called by
+ * module_enable() code.
+ * If the clockdomain is in software-supervised idle mode, force the
+ * clockdomain to wake. If the clockdomain is in hardware-supervised idle
+ * mode, add clkdm-pwrdm autodependencies, to ensure that devices in the
+ * clockdomain can be read from/written to by on-chip processors.
+ * Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
+ */
+int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
+{
+ /* The clkdm attribute does not exist yet prior OMAP4 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return 0;
+
+ /*
+ * XXX Rewrite this code to maintain a list of enabled
+ * downstream hwmods for debugging purposes?
+ */
+
+ if (!oh)
return -EINVAL;
-#ifdef DEBUG
- if (atomic_read(&clkdm->usecount) == 0) {
- WARN_ON(1); /* underflow */
- return -ERANGE;
- }
-#endif
+ return _clkdm_clk_hwmod_enable(clkdm);
+}
- if (atomic_dec_return(&clkdm->usecount) > 0)
+/**
+ * clkdm_hwmod_disable - remove an enabled downstream hwmod from this clkdm
+ * @clkdm: struct clockdomain *
+ * @oh: struct omap_hwmod * of the disabled downstream hwmod
+ *
+ * Decrement the usecount of this clockdomain @clkdm when @oh is
+ * disabled. Intended to be called by module_disable() code.
+ * If the clockdomain usecount goes to 0, put the clockdomain to sleep
+ * (software-supervised mode) or remove the clkdm autodependencies
+ * (hardware-supervised mode).
+ * Returns -EINVAL if passed null pointers; -ERANGE if the @clkdm usecount
+ * underflows; or returns 0 upon success or if the clockdomain is in hwsup
+ * idle mode.
+ */
+int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
+{
+ /* The clkdm attribute does not exist yet prior OMAP4 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
return 0;
- /* All downstream clocks of this clockdomain are now disabled */
-
- pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
- clk->name);
+ /*
+ * XXX Rewrite this code to maintain a list of enabled
+ * downstream hwmods for debugging purposes?
+ */
- arch_clkdm->clkdm_clk_disable(clkdm);
- pwrdm_clkdm_state_switch(clkdm);
+ if (!oh)
+ return -EINVAL;
- return 0;
+ return _clkdm_clk_hwmod_disable(clkdm);
}
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 5823584d9cd7..1e50c88b8a07 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -17,9 +17,11 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
#include <linux/init.h>
+#include <linux/spinlock.h>
#include "powerdomain.h"
#include <plat/clock.h>
+#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
/*
@@ -82,6 +84,9 @@ struct clkdm_dep {
const struct omap_chip_id omap_chip;
};
+/* Possible flags for struct clockdomain._flags */
+#define _CLKDM_FLAG_HWSUP_ENABLED BIT(0)
+
/**
* struct clockdomain - OMAP clockdomain
* @name: clockdomain name
@@ -89,6 +94,7 @@ struct clkdm_dep {
* @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
* @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
* @flags: Clockdomain capability flags
+ * @_flags: Flags for use only by internal clockdomain code
* @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
* @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers
* @cm_inst: (OMAP4 only) CM instance register offset
@@ -113,6 +119,7 @@ struct clockdomain {
} pwrdm;
const u16 clktrctrl_mask;
const u8 flags;
+ u8 _flags;
const u8 dep_bit;
const u8 prcm_partition;
const s16 cm_inst;
@@ -122,6 +129,7 @@ struct clockdomain {
const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
+ spinlock_t lock;
};
/**
@@ -177,12 +185,15 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
void clkdm_allow_idle(struct clockdomain *clkdm);
void clkdm_deny_idle(struct clockdomain *clkdm);
+bool clkdm_in_hwsup(struct clockdomain *clkdm);
int clkdm_wakeup(struct clockdomain *clkdm);
int clkdm_sleep(struct clockdomain *clkdm);
int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
+int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
+int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
extern void __init omap2xxx_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index 48d0db7e6069..f740edb111f4 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -183,7 +183,8 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
_clkdm_add_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
- clkdm_wakeup(clkdm);
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap2_clkdm_wakeup(clkdm);
}
return 0;
@@ -205,7 +206,8 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
_clkdm_del_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
- clkdm_sleep(clkdm);
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap2_clkdm_sleep(clkdm);
}
return 0;
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index a1a4ecd26544..b43706aa08bd 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -95,13 +95,8 @@ static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
{
- bool hwsup = false;
-
- hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup)
- clkdm_wakeup(clkdm);
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return omap4_clkdm_wakeup(clkdm);
return 0;
}
@@ -113,8 +108,8 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
- if (!hwsup)
- clkdm_sleep(clkdm);
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ omap4_clkdm_sleep(clkdm);
return 0;
}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 66090f2676ce..dccc651fa0d0 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -565,7 +565,7 @@ static struct clockdomain ducati_44xx_clkdm = {
};
static struct clockdomain mpu_44xx_clkdm = {
- .name = "mpu_clkdm",
+ .name = "mpuss_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.prcm_partition = OMAP4430_CM1_PARTITION,
.cm_inst = OMAP4430_CM1_MPU_INST,
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 0e77945d26ec..65597a745638 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -101,6 +101,10 @@
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9)
+/* Used by CM_L4CFG_CLKSTCTRL */
+#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT 9
+#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK (1 << 9)
+
/* Used by CM_CEFUSE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
@@ -413,6 +417,10 @@
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11)
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT 13
+#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK (1 << 13)
+
/*
* Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
* CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
@@ -444,6 +452,10 @@
#define OMAP4430_CLKSEL_60M_SHIFT 24
#define OMAP4430_CLKSEL_60M_MASK (1 << 24)
+/* Used by CM_MPU_MPU_CLKCTRL */
+#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT 25
+#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+
/* Used by CM1_ABE_AESS_CLKCTRL */
#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24)
@@ -460,6 +472,10 @@
#define OMAP4430_CLKSEL_DIV_SHIFT 24
#define OMAP4430_CLKSEL_DIV_MASK (1 << 24)
+/* Used by CM_MPU_MPU_CLKCTRL */
+#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
+
/* Used by CM_CAM_FDIF_CLKCTRL */
#define OMAP4430_CLKSEL_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24)
@@ -555,6 +571,14 @@
#define OMAP4430_D2D_STATDEP_SHIFT 18
#define OMAP4430_D2D_STATDEP_MASK (1 << 18)
+/* Used by CM_CLKSEL_DPLL_MPU */
+#define OMAP4460_DCC_COUNT_MAX_SHIFT 24
+#define OMAP4460_DCC_COUNT_MAX_MASK (0xff << 24)
+
+/* Used by CM_CLKSEL_DPLL_MPU */
+#define OMAP4460_DCC_EN_SHIFT 22
+#define OMAP4460_DCC_EN_MASK (1 << 22)
+
/*
* Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
* CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
@@ -564,6 +588,10 @@
#define OMAP4430_DELTAMSTEP_SHIFT 0
#define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0)
+/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
+#define OMAP4460_DELTAMSTEP_0_20_SHIFT 0
+#define OMAP4460_DELTAMSTEP_0_20_MASK (0x1fffff << 0)
+
/* Used by CM_DLL_CTRL */
#define OMAP4430_DLL_OVERRIDE_SHIFT 0
#define OMAP4430_DLL_OVERRIDE_MASK (1 << 0)
@@ -1106,6 +1134,10 @@
#define OMAP4430_MODULEMODE_SHIFT 0
#define OMAP4430_MODULEMODE_MASK (0x3 << 0)
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4460_MPU_DYNDEP_SHIFT 19
+#define OMAP4460_MPU_DYNDEP_MASK (1 << 19)
+
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9)
@@ -1198,6 +1230,10 @@
#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10)
+/* Used by CM_WKUP_BANDGAP_CLKCTRL */
+#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT 8
+#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK (1 << 8)
+
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11
#define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11)
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 0b87ec82b41c..3380beeace6e 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -1,7 +1,7 @@
/*
* OMAP4 Clock Management (CM) definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
@@ -23,10 +23,4 @@
#define OMAP4_CM_CLKSTCTRL 0x0000
#define OMAP4_CM_STATICDEP 0x0004
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
-# endif
#endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index a482bfa0a954..eb2a472bbf46 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -2,6 +2,7 @@
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -32,6 +33,22 @@
#include "prm44xx.h"
#include "prcm_mpu44xx.h"
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
+#define CLKCTRL_IDLEST_INTRANSITION 0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
+#define CLKCTRL_IDLEST_DISABLED 0x3
+
static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
[OMAP4430_INVALID_PRCM_PARTITION] = 0,
[OMAP4430_PRM_PARTITION] = OMAP4430_PRM_BASE,
@@ -41,6 +58,48 @@ static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
[OMAP4430_PRCM_MPU_PARTITION] = OMAP4430_PRCM_MPU_BASE,
};
+/* Private functions */
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
+ v &= OMAP4430_IDLEST_MASK;
+ v >>= OMAP4430_IDLEST_SHIFT;
+ return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
+
+ return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+ v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/* Public functions */
+
/* Read a register in a CM instance */
u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
@@ -200,36 +259,93 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
*/
/**
- * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
- * @clkctrl_reg: CLKCTRL module address
+ * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be functional. If the idle state is in any
* the non functional state (trans, idle or disabled), module and thus the
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
+ */
+int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * omap4_cminst_wait_module_idle - wait for a module to be in 'disabled'
+ * state
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
- * Module idle state:
- * 0x0 func: Module is fully functional, including OCP
- * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
- * abortion
- * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
- * using separate functional clock
- * 0x3 disabled: Module is disabled and cannot be accessed
- *
+ * Wait for the module IDLEST to be disabled. Some PRCM transition,
+ * like reset assertion or parent clock de-activation must wait the
+ * module to be fully disabled.
*/
-int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
+int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
int i = 0;
- if (!clkctrl_reg)
+ if (!clkctrl_offs)
return 0;
- omap_test_timeout((
- ((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) ||
- (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >>
- OMAP4430_IDLEST_SHIFT) == 0x2)),
- MAX_MODULE_READY_TIME, i);
+ omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
+ CLKCTRL_IDLEST_DISABLED),
+ MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
+/**
+ * omap4_cminst_module_enable - Enable the modulemode inside CLKCTRL
+ * @mode: Module mode (SW or HW)
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
+ v &= ~OMAP4430_MODULEMODE_MASK;
+ v |= mode << OMAP4430_MODULEMODE_SHIFT;
+ omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
+}
+
+/**
+ * omap4_cminst_module_disable - Disable the module inside CLKCTRL
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
+ v &= ~OMAP4430_MODULEMODE_MASK;
+ omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
+}
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index 2b32c181a2ee..a018a7327879 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -17,6 +17,37 @@ extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
+
+# ifdef CONFIG_ARCH_OMAP4
+extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+
+extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+
+# else
+
+static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+
+static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+ s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+
+# endif
+
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
@@ -32,6 +63,4 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
u32 mask);
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5b8ca680ed93..1077ad663f93 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = {
};
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
- *sdp4430_keypad_data)
+ *sdp4430_keypad_data, struct omap_board_data *bdata)
{
struct omap_device *od;
struct omap_hwmod *oh;
@@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
name, oh->name);
return PTR_ERR(od);
}
+ oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 543fcb8b518c..a5b7a236aa5b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,6 +25,7 @@
#include <video/omapdss.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
static struct platform_device omap_display_device = {
.name = "omapdss",
@@ -42,20 +43,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = {
},
};
-/* oh_core is used for getting opt-clocks */
-static struct omap_hwmod *oh_core;
-
-static bool opt_clock_available(const char *clk_role)
-{
- int i;
-
- for (i = 0; i < oh_core->opt_clks_cnt; i++) {
- if (!strcmp(oh_core->opt_clks[i].role, clk_role))
- return true;
- }
- return false;
-}
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -109,16 +96,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
}
- /* opt_clks are always associated with dss hwmod */
- oh_core = omap_hwmod_lookup("dss_core");
- if (!oh_core) {
- pr_err("Could not look up dss_core.\n");
- return -ENODEV;
- }
-
pdata.board_data = board_data;
- pdata.board_data->get_last_off_on_transaction_id = NULL;
- pdata.opt_clock_available = opt_clock_available;
+ pdata.board_data->get_context_loss_count =
+ omap_pm_get_dev_context_loss_count;
for (i = 0; i < oh_count; i++) {
oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 66868c5d5a29..a9b45c76e1d3 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
@@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 79c478c4cb1c..ace99944e96f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,9 +21,19 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
+#include <plat/common.h>
+#include <plat/omap_hwmod.h>
#include "mux.h"
+/* In register I2C_CON, Bit 15 is the I2C enable bit */
+#define I2C_EN BIT(15)
+#define OMAP2_I2C_CON_OFFSET 0x24
+#define OMAP4_I2C_CON_OFFSET 0xA4
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -37,3 +47,61 @@ void __init omap2_i2c_mux_pins(int bus_id)
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
+
+/**
+ * omap_i2c_reset - reset the omap i2c module.
+ * @oh: struct omap_hwmod *
+ *
+ * The i2c moudle in omap2, omap3 had a special sequence to reset. The
+ * sequence is:
+ * - Disable the I2C.
+ * - Write to SOFTRESET bit.
+ * - Enable the I2C.
+ * - Poll on the RESETDONE bit.
+ * The sequence is implemented in below function. This is called for 2420,
+ * 2430 and omap3.
+ */
+int omap_i2c_reset(struct omap_hwmod *oh)
+{
+ u32 v;
+ u16 i2c_con;
+ int c = 0;
+
+ if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
+ i2c_con = OMAP4_I2C_CON_OFFSET;
+ } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
+ i2c_con = OMAP2_I2C_CON_OFFSET;
+ } else {
+ WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
+ oh->name);
+ return -EINVAL;
+ }
+
+ /* Disable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v &= ~I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Write to the SOFTRESET bit */
+ omap_hwmod_softreset(oh);
+
+ /* Enable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v |= I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Poll on RESETDONE bit */
+ omap_test_timeout((omap_hwmod_read(oh,
+ oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ else
+ pr_debug("%s: %s: softreset in %d usec\n", __func__,
+ oh->name, c);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2537090aa33a..37efb8696927 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -31,7 +31,7 @@
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
-u32 omap3_features;
+u32 omap_features;
unsigned int omap_rev(void)
{
@@ -183,14 +183,14 @@ static void __init omap24xx_check_revision(void)
#define OMAP3_CHECK_FEATURE(status,feat) \
if (((status & OMAP3_ ##feat## _MASK) \
>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
- omap3_features |= OMAP3_HAS_ ##feat; \
+ omap_features |= OMAP3_HAS_ ##feat; \
}
static void __init omap3_check_features(void)
{
u32 status;
- omap3_features = 0;
+ omap_features = 0;
status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
@@ -200,11 +200,11 @@ static void __init omap3_check_features(void)
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
if (cpu_is_omap3630())
- omap3_features |= OMAP3_HAS_192MHZ_CLK;
+ omap_features |= OMAP3_HAS_192MHZ_CLK;
if (!cpu_is_omap3505() && !cpu_is_omap3517())
- omap3_features |= OMAP3_HAS_IO_WAKEUP;
+ omap_features |= OMAP3_HAS_IO_WAKEUP;
- omap3_features |= OMAP3_HAS_SDRC;
+ omap_features |= OMAP3_HAS_SDRC;
/*
* TODO: Get additional info (where applicable)
@@ -212,9 +212,34 @@ static void __init omap3_check_features(void)
*/
}
+static void __init omap4_check_features(void)
+{
+ u32 si_type;
+
+ if (cpu_is_omap443x())
+ omap_features |= OMAP4_HAS_MPU_1GHZ;
+
+
+ if (cpu_is_omap446x()) {
+ si_type =
+ read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1);
+ switch ((si_type & (3 << 16)) >> 16) {
+ case 2:
+ /* High performance device */
+ omap_features |= OMAP4_HAS_MPU_1_5GHZ;
+ break;
+ case 1:
+ default:
+ /* Standard device */
+ omap_features |= OMAP4_HAS_MPU_1_2GHZ;
+ break;
+ }
+ }
+}
+
static void __init ti816x_check_features(void)
{
- omap3_features = OMAP3_HAS_NEON;
+ omap_features = OMAP3_HAS_NEON;
}
static void __init omap3_check_revision(void)
@@ -344,10 +369,10 @@ static void __init omap4_check_revision(void)
rev = (idcode >> 28) & 0xf;
/*
- * Few initial ES2.0 samples IDCODE is same as ES1.0
+ * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
* Use ARM register to detect the correct ES version
*/
- if (!rev) {
+ if (!rev && (hawkeye != 0xb94e)) {
idcode = read_cpuid(CPUID_ID);
rev = (idcode & 0xf) - 1;
}
@@ -377,6 +402,15 @@ static void __init omap4_check_revision(void)
omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
+ case 0xb94e:
+ switch (rev) {
+ case 0:
+ default:
+ omap_revision = OMAP4460_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
+ break;
+ }
+ break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
@@ -518,6 +552,7 @@ void __init omap2_check_revision(void)
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
+ omap4_check_features();
return;
} else {
pr_err("OMAP revision unknown, please fix!\n");
diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h
deleted file mode 100644
index 53b027441c56..000000000000
--- a/arch/arm/mach-omap2/include/mach/clkdev.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/clkdev.h
- */
-
-#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index adb083e41acd..f286012783c6 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -225,8 +225,8 @@ static u32 omap2_get_pte_attr(struct iotlb_entry *e)
attr = e->mixed << 5;
attr |= e->endian;
attr |= e->elsz >> 3;
- attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
-
+ attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) ||
+ (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6);
return attr;
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index c7fb22abc219..655e9480eb98 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void)
if (!omap_mux_options)
return;
- options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+ options = kstrdup(omap_mux_options, GFP_KERNEL);
if (!options)
return;
- strcpy(options, omap_mux_options);
next_opt = options;
while ((token = strsep(&next_opt, ",")) != NULL) {
@@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src,
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
if (src->muxnames[i]) {
- dst->muxnames[i] =
- kmalloc(strlen(src->muxnames[i]) + 1,
- GFP_KERNEL);
+ dst->muxnames[i] = kstrdup(src->muxnames[i],
+ GFP_KERNEL);
if (!dst->muxnames[i])
goto free;
- strcpy(dst->muxnames[i], src->muxnames[i]);
}
}
#ifdef CONFIG_DEBUG_FS
for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
if (src->balls[i]) {
- dst->balls[i] =
- kmalloc(strlen(src->balls[i]) + 1,
- GFP_KERNEL);
+ dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL);
if (!dst->balls[i])
goto free;
- strcpy(dst->balls[i], src->balls[i]);
}
}
#endif
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 3fc5dc7233da..e61feadcda4e 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -67,7 +67,7 @@ static struct iommu_device omap4_devices[] = {
.pdata = {
.name = "ducati",
.nr_tlb_entries = 32,
- .clk_name = "ducati_ick",
+ .clk_name = "ipu_fck",
.da_start = 0x0,
.da_end = 0xFFFFF000,
},
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7d242c9e2a2c..84cc0bdda3ae 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -146,9 +146,10 @@
#include <plat/prcm.h>
#include "cm2xxx_3xxx.h"
-#include "cm44xx.h"
+#include "cminst44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
+#include "prminst44xx.h"
#include "mux.h"
/* Maximum microseconds to wait for OMAP module to softreset */
@@ -679,6 +680,56 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
}
/**
+ * _enable_module - enable CLKCTRL modulemode on OMAP4
+ * @oh: struct omap_hwmod *
+ *
+ * Enables the PRCM module mode related to the hwmod @oh.
+ * No return value.
+ */
+static void _enable_module(struct omap_hwmod *oh)
+{
+ /* The module mode does not exist prior OMAP4 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return;
+
+ if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+ return;
+
+ pr_debug("omap_hwmod: %s: _enable_module: %d\n",
+ oh->name, oh->prcm.omap4.modulemode);
+
+ omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
+ oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
+ * _disable_module - enable CLKCTRL modulemode on OMAP4
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * No return value.
+ */
+static void _disable_module(struct omap_hwmod *oh)
+{
+ /* The module mode does not exist prior OMAP4 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return;
+
+ if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+ return;
+
+ pr_debug("omap_hwmod: %s: _disable_module\n", oh->name);
+
+ omap4_cminst_module_disable(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
*
@@ -990,9 +1041,40 @@ static struct omap_hwmod *_lookup(const char *name)
return oh;
}
+/**
+ * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Convert a clockdomain name stored in a struct omap_hwmod into a
+ * clockdomain pointer, and save it into the struct omap_hwmod.
+ * return -EINVAL if clkdm_name does not exist or if the lookup failed.
+ */
+static int _init_clkdm(struct omap_hwmod *oh)
+{
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return 0;
+
+ if (!oh->clkdm_name) {
+ pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name);
+ return -EINVAL;
+ }
+
+ oh->clkdm = clkdm_lookup(oh->clkdm_name);
+ if (!oh->clkdm) {
+ pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
+ oh->name, oh->clkdm_name);
+ return -EINVAL;
+ }
+
+ pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
+ oh->name, oh->clkdm_name);
+
+ return 0;
+}
/**
- * _init_clocks - clk_get() all clocks associated with this hwmod
+ * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as
+ * well the clockdomain.
* @oh: struct omap_hwmod *
* @data: not used; pass NULL
*
@@ -1012,6 +1094,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
ret |= _init_main_clk(oh);
ret |= _init_interface_clks(oh);
ret |= _init_opt_clks(oh);
+ ret |= _init_clkdm(oh);
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
@@ -1028,7 +1111,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
- * appropriate *_cm_wait_module_ready() function.
+ * appropriate *_cm*_wait_module_ready() function.
*/
static int _wait_target_ready(struct omap_hwmod *oh)
{
@@ -1055,7 +1138,13 @@ static int _wait_target_ready(struct omap_hwmod *oh)
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
} else if (cpu_is_omap44xx()) {
- ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg);
+ if (!oh->clkdm)
+ return -EINVAL;
+
+ ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
} else {
BUG();
};
@@ -1064,6 +1153,36 @@ static int _wait_target_ready(struct omap_hwmod *oh)
}
/**
+ * _wait_target_disable - wait for a module to be disabled
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to enter slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully enters
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_idle() function.
+ */
+static int _wait_target_disable(struct omap_hwmod *oh)
+{
+ /* TODO: For now just handle OMAP4+ */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return 0;
+
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ return 0;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
* _lookup_hardreset - fill register bit info for this hwmod/reset line
* @oh: struct omap_hwmod *
* @name: name of the reset line in the context of this hwmod
@@ -1119,8 +1238,10 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
ohri.rst_shift);
else if (cpu_is_omap44xx())
- return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
- ohri.rst_shift);
+ return omap4_prminst_assert_hardreset(ohri.rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
else
return -EINVAL;
}
@@ -1155,8 +1276,10 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (ohri.st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, name);
- ret = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
- ohri.rst_shift);
+ ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
} else {
return -EINVAL;
}
@@ -1191,8 +1314,10 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
ohri.st_shift);
} else if (cpu_is_omap44xx()) {
- return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
- ohri.rst_shift);
+ return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
} else {
return -EINVAL;
}
@@ -1312,6 +1437,7 @@ static int _reset(struct omap_hwmod *oh)
static int _enable(struct omap_hwmod *oh)
{
int r;
+ int hwsup = 0;
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
@@ -1323,14 +1449,6 @@ static int _enable(struct omap_hwmod *oh)
return -EINVAL;
}
- /* Mux pins for device runtime if populated */
- if (oh->mux && (!oh->mux->enabled ||
- ((oh->_state == _HWMOD_STATE_IDLE) &&
- oh->mux->pads_dynamic)))
- omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-
- _add_initiator_dep(oh, mpu_oh);
- _enable_clocks(oh);
/*
* If an IP contains only one HW reset line, then de-assert it in order
@@ -1341,22 +1459,56 @@ static int _enable(struct omap_hwmod *oh)
oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
_deassert_hardreset(oh, oh->rst_lines[0].name);
- r = _wait_target_ready(oh);
- if (r) {
- pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
- oh->name, r);
- _disable_clocks(oh);
+ /* Mux pins for device runtime if populated */
+ if (oh->mux && (!oh->mux->enabled ||
+ ((oh->_state == _HWMOD_STATE_IDLE) &&
+ oh->mux->pads_dynamic)))
+ omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+
+ _add_initiator_dep(oh, mpu_oh);
- return r;
+ if (oh->clkdm) {
+ /*
+ * A clockdomain must be in SW_SUP before enabling
+ * completely the module. The clockdomain can be set
+ * in HW_AUTO only when the module become ready.
+ */
+ hwsup = clkdm_in_hwsup(oh->clkdm);
+ r = clkdm_hwmod_enable(oh->clkdm, oh);
+ if (r) {
+ WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+ oh->name, oh->clkdm->name, r);
+ return r;
+ }
}
- oh->_state = _HWMOD_STATE_ENABLED;
+ _enable_clocks(oh);
+ _enable_module(oh);
+
+ r = _wait_target_ready(oh);
+ if (!r) {
+ /*
+ * Set the clockdomain to HW_AUTO only if the target is ready,
+ * assuming that the previous state was HW_AUTO
+ */
+ if (oh->clkdm && hwsup)
+ clkdm_allow_idle(oh->clkdm);
+
+ oh->_state = _HWMOD_STATE_ENABLED;
- /* Access the sysconfig only if the target is ready */
- if (oh->class->sysc) {
- if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
- _update_sysc_cache(oh);
- _enable_sysc(oh);
+ /* Access the sysconfig only if the target is ready */
+ if (oh->class->sysc) {
+ if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+ _update_sysc_cache(oh);
+ _enable_sysc(oh);
+ }
+ } else {
+ _disable_clocks(oh);
+ pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
+ oh->name, r);
+
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
}
return r;
@@ -1372,6 +1524,8 @@ static int _enable(struct omap_hwmod *oh)
*/
static int _idle(struct omap_hwmod *oh)
{
+ int ret;
+
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -1383,7 +1537,20 @@ static int _idle(struct omap_hwmod *oh)
if (oh->class->sysc)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
+ _disable_module(oh);
+ ret = _wait_target_disable(oh);
+ if (ret)
+ pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+ oh->name);
+ /*
+ * The module must be in idle mode before disabling any parents
+ * clocks. Otherwise, the parent clock might be disabled before
+ * the module transition is done, and thus will prevent the
+ * transition to complete properly.
+ */
_disable_clocks(oh);
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
/* Mux pins for device idle if populated */
if (oh->mux && oh->mux->pads_dynamic)
@@ -1475,7 +1642,14 @@ static int _shutdown(struct omap_hwmod *oh)
if (oh->_state == _HWMOD_STATE_ENABLED) {
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */
+ _disable_module(oh);
+ ret = _wait_target_disable(oh);
+ if (ret)
+ pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+ oh->name);
_disable_clocks(oh);
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
}
/* XXX Should this code also force-disable the optional clocks? */
@@ -1656,6 +1830,33 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
}
/**
+ * omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
+ * @oh: struct omap_hwmod *
+ *
+ * This is a public function exposed to drivers. Some drivers may need to do
+ * some settings before and after resetting the device. Those drivers after
+ * doing the necessary settings could use this function to start a reset by
+ * setting the SYSCONFIG.SOFTRESET bit.
+ */
+int omap_hwmod_softreset(struct omap_hwmod *oh)
+{
+ u32 v;
+ int ret;
+
+ if (!oh || !(oh->_sysc_cache))
+ return -EINVAL;
+
+ v = oh->_sysc_cache;
+ ret = _set_softreset(oh, &v);
+ if (ret)
+ goto error;
+ _write_sysconfig(v, oh);
+
+error:
+ return ret;
+}
+
+/**
* omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
* @oh: struct omap_hwmod *
* @idlemode: SIDLEMODE field bits (shifted to bit 0)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index f3901abf2c28..a015c69068f6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1029,9 +1029,16 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr;
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+ .flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
/* I2C1 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 2a52f025bd06..408193d8e044 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
.pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
+ { }
};
/* l4_core ->usbhsotg interface */
@@ -1078,10 +1079,15 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
.fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
/* I2C1 */
@@ -1092,6 +1098,7 @@ static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2chs1_fck",
@@ -1127,6 +1134,7 @@ static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
static struct omap_hwmod omap2430_i2c2_hwmod = {
.name = "i2c2",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2chs2_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1a52716e48bf..25bf43b5a4ec 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1306,8 +1306,10 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
};
static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
+ .name = "i2c",
+ .sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
@@ -1607,6 +1609,9 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
@@ -1615,6 +1620,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@@ -1638,6 +1644,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
@@ -1646,6 +1655,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@@ -1669,6 +1679,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
@@ -1688,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = i2c3_mpu_irqs,
.sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index e01143725b08..6201422c0606 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,11 +22,13 @@
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
+#include <plat/i2c.h>
#include <plat/gpio.h>
#include <plat/dma.h>
#include <plat/mcspi.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>
+#include <plat/i2c.h>
#include "omap_hwmod_common_data.h"
@@ -121,9 +123,16 @@ static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
static struct omap_hwmod omap44xx_dmm_hwmod = {
.name = "dmm",
.class = &omap44xx_dmm_hwmod_class,
- .mpu_irqs = omap44xx_dmm_irqs,
+ .clkdm_name = "l3_emif_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
+ .mpu_irqs = omap44xx_dmm_irqs,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
@@ -171,6 +180,13 @@ static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
static struct omap_hwmod omap44xx_emif_fw_hwmod = {
.name = "emif_fw",
.class = &omap44xx_emif_fw_hwmod_class,
+ .clkdm_name = "l3_emif_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -210,6 +226,14 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
static struct omap_hwmod omap44xx_l3_instr_hwmod = {
.name = "l3_instr",
.class = &omap44xx_l3_hwmod_class,
+ .clkdm_name = "l3_instr_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -302,7 +326,14 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
.name = "l3_main_1",
.class = &omap44xx_l3_hwmod_class,
+ .clkdm_name = "l3_1_clkdm",
.mpu_irqs = omap44xx_l3_main_1_irqs,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -398,6 +429,13 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
.name = "l3_main_2",
.class = &omap44xx_l3_hwmod_class,
+ .clkdm_name = "l3_2_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -448,6 +486,14 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
.name = "l3_main_3",
.class = &omap44xx_l3_hwmod_class,
+ .clkdm_name = "l3_instr_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -505,6 +551,12 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
static struct omap_hwmod omap44xx_l4_abe_hwmod = {
.name = "l4_abe",
.class = &omap44xx_l4_hwmod_class,
+ .clkdm_name = "abe_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -527,6 +579,13 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
.name = "l4_cfg",
.class = &omap44xx_l4_hwmod_class,
+ .clkdm_name = "l4_cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -549,6 +608,13 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
static struct omap_hwmod omap44xx_l4_per_hwmod = {
.name = "l4_per",
.class = &omap44xx_l4_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -571,6 +637,13 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
.name = "l4_wkup",
.class = &omap44xx_l4_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -601,6 +674,7 @@ static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
static struct omap_hwmod omap44xx_mpu_private_hwmod = {
.name = "mpu_private",
.class = &omap44xx_mpu_bus_hwmod_class,
+ .clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -739,12 +813,15 @@ static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = {
static struct omap_hwmod omap44xx_aess_hwmod = {
.name = "aess",
.class = &omap44xx_aess_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_aess_irqs,
.sdma_reqs = omap44xx_aess_sdma_reqs,
.main_clk = "aess_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_aess_slaves,
@@ -771,9 +848,10 @@ static struct omap_hwmod_opt_clk bandgap_opt_clks[] = {
static struct omap_hwmod omap44xx_bandgap_hwmod = {
.name = "bandgap",
.class = &omap44xx_bandgap_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET,
},
},
.opt_clks = bandgap_opt_clks,
@@ -828,11 +906,13 @@ static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = {
static struct omap_hwmod omap44xx_counter_32k_hwmod = {
.name = "counter_32k",
.class = &omap44xx_counter_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.flags = HWMOD_SWSUP_SIDLE,
.main_clk = "sys_32k_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET,
},
},
.slaves = omap44xx_counter_32k_slaves,
@@ -911,11 +991,13 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
static struct omap_hwmod omap44xx_dma_system_hwmod = {
.name = "dma_system",
.class = &omap44xx_dma_hwmod_class,
+ .clkdm_name = "l3_dma_clkdm",
.mpu_irqs = omap44xx_dma_system_irqs,
.main_clk = "l3_div_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET,
},
},
.dev_attr = &dma_dev_attr,
@@ -1003,12 +1085,15 @@ static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = {
static struct omap_hwmod omap44xx_dmic_hwmod = {
.name = "dmic",
.class = &omap44xx_dmic_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_dmic_irqs,
.sdma_reqs = omap44xx_dmic_sdma_reqs,
.main_clk = "dmic_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_dmic_slaves,
@@ -1070,12 +1155,13 @@ static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = {
static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
.name = "dsp_c0",
.class = &omap44xx_dsp_hwmod_class,
+ .clkdm_name = "tesla_clkdm",
.flags = HWMOD_INIT_NO_RESET,
.rst_lines = omap44xx_dsp_c0_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets),
.prcm = {
.omap4 = {
- .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
+ .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1084,14 +1170,17 @@ static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
static struct omap_hwmod omap44xx_dsp_hwmod = {
.name = "dsp",
.class = &omap44xx_dsp_hwmod_class,
+ .clkdm_name = "tesla_clkdm",
.mpu_irqs = omap44xx_dsp_irqs,
.rst_lines = omap44xx_dsp_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_resets),
.main_clk = "dsp_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL,
- .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
+ .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
+ .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
+ .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.slaves = omap44xx_dsp_slaves,
@@ -1136,7 +1225,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1175,10 +1264,12 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = {
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
.class = &omap44xx_dss_hwmod_class,
- .main_clk = "dss_fck",
+ .clkdm_name = "l3_dss_clkdm",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
.opt_clks = dss_opt_clks,
@@ -1238,7 +1329,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dispc_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dispc_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1267,17 +1358,27 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
&omap44xx_l4_per__dss_dispc,
};
+static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "tv_clk", .clk = "dss_tv_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
+ .clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dispc_irqs,
.sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .opt_clks = dss_dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1329,7 +1430,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi1_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dsi1_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1358,17 +1459,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
&omap44xx_l4_per__dss_dsi1,
};
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap44xx_dsi_hwmod_class,
+ .clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dsi1_irqs,
.sdma_reqs = omap44xx_dss_dsi1_sdma_reqs,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .opt_clks = dss_dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1399,7 +1508,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi2_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dsi2_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1428,17 +1537,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = {
&omap44xx_l4_per__dss_dsi2,
};
+static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
.name = "dss_dsi2",
.class = &omap44xx_dsi_hwmod_class,
+ .clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dsi2_irqs,
.sdma_reqs = omap44xx_dss_dsi2_sdma_reqs,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .opt_clks = dss_dsi2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1489,7 +1606,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hdmi_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_hdmi_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1518,17 +1635,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
&omap44xx_l4_per__dss_hdmi,
};
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
+ .clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .opt_clks = dss_hdmi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1574,7 +1699,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_rfbi_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_rfbi_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1603,16 +1728,24 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
&omap44xx_l4_per__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_fck" },
+};
+
static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap44xx_rfbi_hwmod_class,
+ .clkdm_name = "l3_dss_clkdm",
.sdma_reqs = omap44xx_dss_rfbi_sdma_reqs,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1642,7 +1775,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_venc_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_venc_dma_addrs,
.user = OCP_USER_SDMA,
};
@@ -1674,10 +1807,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
- .main_clk = "dss_fck",
+ .clkdm_name = "l3_dss_clkdm",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
.slaves = omap44xx_dss_venc_slaves,
@@ -1751,11 +1886,14 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio1_hwmod = {
.name = "gpio1",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.mpu_irqs = omap44xx_gpio1_irqs,
.main_clk = "gpio1_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio1_opt_clks,
@@ -1803,12 +1941,15 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio2_hwmod = {
.name = "gpio2",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_gpio2_irqs,
.main_clk = "gpio2_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio2_opt_clks,
@@ -1856,12 +1997,15 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio3_hwmod = {
.name = "gpio3",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_gpio3_irqs,
.main_clk = "gpio3_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio3_opt_clks,
@@ -1909,12 +2053,15 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio4_hwmod = {
.name = "gpio4",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_gpio4_irqs,
.main_clk = "gpio4_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio4_opt_clks,
@@ -1962,12 +2109,15 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio5_hwmod = {
.name = "gpio5",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_gpio5_irqs,
.main_clk = "gpio5_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio5_opt_clks,
@@ -2015,12 +2165,15 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
static struct omap_hwmod omap44xx_gpio6_hwmod = {
.name = "gpio6",
.class = &omap44xx_gpio_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_gpio6_irqs,
.main_clk = "gpio6_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = gpio6_opt_clks,
@@ -2094,11 +2247,14 @@ static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = {
static struct omap_hwmod omap44xx_hsi_hwmod = {
.name = "hsi",
.class = &omap44xx_hsi_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
.mpu_irqs = omap44xx_hsi_irqs,
.main_clk = "hsi_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.slaves = omap44xx_hsi_slaves,
@@ -2127,6 +2283,12 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
.name = "i2c",
.sysc = &omap44xx_i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_2,
+ .reset = &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */
@@ -2168,17 +2330,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
- .flags = HWMOD_INIT_NO_RESET,
+ .clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c1_irqs,
.sdma_reqs = omap44xx_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
+ .dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
@@ -2221,17 +2387,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
static struct omap_hwmod omap44xx_i2c2_hwmod = {
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
- .flags = HWMOD_INIT_NO_RESET,
+ .clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c2_irqs,
.sdma_reqs = omap44xx_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
+ .dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
@@ -2274,17 +2444,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
static struct omap_hwmod omap44xx_i2c3_hwmod = {
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
- .flags = HWMOD_INIT_NO_RESET,
+ .clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c3_irqs,
.sdma_reqs = omap44xx_i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
+ .dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
@@ -2327,17 +2501,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
static struct omap_hwmod omap44xx_i2c4_hwmod = {
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
- .flags = HWMOD_INIT_NO_RESET,
+ .clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c4_irqs,
.sdma_reqs = omap44xx_i2c4_sdma_reqs,
.main_clk = "i2c4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
+ .dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
@@ -2390,12 +2568,13 @@ static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = {
static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
.name = "ipu_c0",
.class = &omap44xx_ipu_hwmod_class,
+ .clkdm_name = "ducati_clkdm",
.flags = HWMOD_INIT_NO_RESET,
.rst_lines = omap44xx_ipu_c0_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets),
.prcm = {
.omap4 = {
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2405,12 +2584,13 @@ static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
.name = "ipu_c1",
.class = &omap44xx_ipu_hwmod_class,
+ .clkdm_name = "ducati_clkdm",
.flags = HWMOD_INIT_NO_RESET,
.rst_lines = omap44xx_ipu_c1_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets),
.prcm = {
.omap4 = {
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2419,14 +2599,17 @@ static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
static struct omap_hwmod omap44xx_ipu_hwmod = {
.name = "ipu",
.class = &omap44xx_ipu_hwmod_class,
+ .clkdm_name = "ducati_clkdm",
.mpu_irqs = omap44xx_ipu_irqs,
.rst_lines = omap44xx_ipu_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets),
.main_clk = "ipu_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
+ .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.slaves = omap44xx_ipu_slaves,
@@ -2506,12 +2689,15 @@ static struct omap_hwmod_opt_clk iss_opt_clks[] = {
static struct omap_hwmod omap44xx_iss_hwmod = {
.name = "iss",
.class = &omap44xx_iss_hwmod_class,
+ .clkdm_name = "iss_clkdm",
.mpu_irqs = omap44xx_iss_irqs,
.sdma_reqs = omap44xx_iss_sdma_reqs,
.main_clk = "iss_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_CAM_ISS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = iss_opt_clks,
@@ -2586,12 +2772,13 @@ static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = {
static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
.name = "iva_seq0",
.class = &omap44xx_iva_hwmod_class,
+ .clkdm_name = "ivahd_clkdm",
.flags = HWMOD_INIT_NO_RESET,
.rst_lines = omap44xx_iva_seq0_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets),
.prcm = {
.omap4 = {
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2601,12 +2788,13 @@ static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
.name = "iva_seq1",
.class = &omap44xx_iva_hwmod_class,
+ .clkdm_name = "ivahd_clkdm",
.flags = HWMOD_INIT_NO_RESET,
.rst_lines = omap44xx_iva_seq1_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets),
.prcm = {
.omap4 = {
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -2615,14 +2803,17 @@ static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
static struct omap_hwmod omap44xx_iva_hwmod = {
.name = "iva",
.class = &omap44xx_iva_hwmod_class,
+ .clkdm_name = "ivahd_clkdm",
.mpu_irqs = omap44xx_iva_irqs,
.rst_lines = omap44xx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_resets),
.main_clk = "iva_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+ .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET,
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
+ .context_offs = OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.slaves = omap44xx_iva_slaves,
@@ -2687,11 +2878,14 @@ static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = {
static struct omap_hwmod omap44xx_kbd_hwmod = {
.name = "kbd",
.class = &omap44xx_kbd_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.mpu_irqs = omap44xx_kbd_irqs,
.main_clk = "kbd_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_kbd_slaves,
@@ -2752,10 +2946,12 @@ static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = {
static struct omap_hwmod omap44xx_mailbox_hwmod = {
.name = "mailbox",
.class = &omap44xx_mailbox_hwmod_class,
+ .clkdm_name = "l4_cfg_clkdm",
.mpu_irqs = omap44xx_mailbox_irqs,
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
},
},
.slaves = omap44xx_mailbox_slaves,
@@ -2842,12 +3038,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = {
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap44xx_mcbsp_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_mcbsp1_irqs,
.sdma_reqs = omap44xx_mcbsp1_sdma_reqs,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mcbsp1_slaves,
@@ -2915,12 +3114,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = {
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap44xx_mcbsp_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_mcbsp2_irqs,
.sdma_reqs = omap44xx_mcbsp2_sdma_reqs,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mcbsp2_slaves,
@@ -2988,12 +3190,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = {
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
.name = "mcbsp3",
.class = &omap44xx_mcbsp_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_mcbsp3_irqs,
.sdma_reqs = omap44xx_mcbsp3_sdma_reqs,
.main_clk = "mcbsp3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mcbsp3_slaves,
@@ -3040,12 +3245,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = {
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
.name = "mcbsp4",
.class = &omap44xx_mcbsp_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mcbsp4_irqs,
.sdma_reqs = omap44xx_mcbsp4_sdma_reqs,
.main_clk = "mcbsp4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mcbsp4_slaves,
@@ -3132,12 +3340,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = {
static struct omap_hwmod omap44xx_mcpdm_hwmod = {
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_PDM_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mcpdm_slaves,
@@ -3217,12 +3428,15 @@ static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
static struct omap_hwmod omap44xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &omap44xx_mcspi_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mcspi1_irqs,
.sdma_reqs = omap44xx_mcspi1_sdma_reqs,
.main_clk = "mcspi1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.dev_attr = &mcspi1_dev_attr,
@@ -3277,12 +3491,15 @@ static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
static struct omap_hwmod omap44xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &omap44xx_mcspi_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mcspi2_irqs,
.sdma_reqs = omap44xx_mcspi2_sdma_reqs,
.main_clk = "mcspi2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.dev_attr = &mcspi2_dev_attr,
@@ -3337,12 +3554,15 @@ static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
static struct omap_hwmod omap44xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &omap44xx_mcspi_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mcspi3_irqs,
.sdma_reqs = omap44xx_mcspi3_sdma_reqs,
.main_clk = "mcspi3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.dev_attr = &mcspi3_dev_attr,
@@ -3395,12 +3615,15 @@ static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
static struct omap_hwmod omap44xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &omap44xx_mcspi_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mcspi4_irqs,
.sdma_reqs = omap44xx_mcspi4_sdma_reqs,
.main_clk = "mcspi4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.dev_attr = &mcspi4_dev_attr,
@@ -3479,12 +3702,15 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = {
static struct omap_hwmod omap44xx_mmc1_hwmod = {
.name = "mmc1",
.class = &omap44xx_mmc_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
.mpu_irqs = omap44xx_mmc1_irqs,
.sdma_reqs = omap44xx_mmc1_sdma_reqs,
.main_clk = "mmc1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.dev_attr = &mmc1_dev_attr,
@@ -3538,12 +3764,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = {
static struct omap_hwmod omap44xx_mmc2_hwmod = {
.name = "mmc2",
.class = &omap44xx_mmc_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
.mpu_irqs = omap44xx_mmc2_irqs,
.sdma_reqs = omap44xx_mmc2_sdma_reqs,
.main_clk = "mmc2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mmc2_slaves,
@@ -3592,12 +3821,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = {
static struct omap_hwmod omap44xx_mmc3_hwmod = {
.name = "mmc3",
.class = &omap44xx_mmc_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mmc3_irqs,
.sdma_reqs = omap44xx_mmc3_sdma_reqs,
.main_clk = "mmc3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mmc3_slaves,
@@ -3644,13 +3876,16 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = {
static struct omap_hwmod omap44xx_mmc4_hwmod = {
.name = "mmc4",
.class = &omap44xx_mmc_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mmc4_irqs,
.sdma_reqs = omap44xx_mmc4_sdma_reqs,
.main_clk = "mmc4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mmc4_slaves,
@@ -3697,12 +3932,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = {
static struct omap_hwmod omap44xx_mmc5_hwmod = {
.name = "mmc5",
.class = &omap44xx_mmc_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mmc5_irqs,
.sdma_reqs = omap44xx_mmc5_sdma_reqs,
.main_clk = "mmc5_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_mmc5_slaves,
@@ -3737,12 +3975,14 @@ static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
static struct omap_hwmod omap44xx_mpu_hwmod = {
.name = "mpu",
.class = &omap44xx_mpu_hwmod_class,
+ .clkdm_name = "mpuss_clkdm",
.flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
.mpu_irqs = omap44xx_mpu_irqs,
.main_clk = "dpll_mpu_m2_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
},
},
.masters = omap44xx_mpu_masters,
@@ -3809,13 +4049,16 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
.name = "smartreflex_core",
.class = &omap44xx_smartreflex_hwmod_class,
+ .clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_core_irqs,
.main_clk = "smartreflex_core_fck",
.vdd_name = "core",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_smartreflex_core_slaves,
@@ -3856,12 +4099,15 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
.name = "smartreflex_iva",
.class = &omap44xx_smartreflex_hwmod_class,
+ .clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_iva_irqs,
.main_clk = "smartreflex_iva_fck",
.vdd_name = "iva",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_smartreflex_iva_slaves,
@@ -3902,12 +4148,15 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
.name = "smartreflex_mpu",
.class = &omap44xx_smartreflex_hwmod_class,
+ .clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_mpu_irqs,
.main_clk = "smartreflex_mpu_fck",
.vdd_name = "mpu",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_smartreflex_mpu_slaves,
@@ -3966,9 +4215,11 @@ static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = {
static struct omap_hwmod omap44xx_spinlock_hwmod = {
.name = "spinlock",
.class = &omap44xx_spinlock_hwmod_class,
+ .clkdm_name = "l4_cfg_clkdm",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
},
},
.slaves = omap44xx_spinlock_slaves,
@@ -4047,11 +4298,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = {
static struct omap_hwmod omap44xx_timer1_hwmod = {
.name = "timer1",
.class = &omap44xx_timer_1ms_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.mpu_irqs = omap44xx_timer1_irqs,
.main_clk = "timer1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer1_slaves,
@@ -4092,11 +4346,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = {
static struct omap_hwmod omap44xx_timer2_hwmod = {
.name = "timer2",
.class = &omap44xx_timer_1ms_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer2_irqs,
.main_clk = "timer2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer2_slaves,
@@ -4137,11 +4394,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = {
static struct omap_hwmod omap44xx_timer3_hwmod = {
.name = "timer3",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer3_irqs,
.main_clk = "timer3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer3_slaves,
@@ -4182,11 +4442,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = {
static struct omap_hwmod omap44xx_timer4_hwmod = {
.name = "timer4",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer4_irqs,
.main_clk = "timer4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer4_slaves,
@@ -4246,11 +4509,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = {
static struct omap_hwmod omap44xx_timer5_hwmod = {
.name = "timer5",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_timer5_irqs,
.main_clk = "timer5_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer5_slaves,
@@ -4310,12 +4576,15 @@ static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = {
static struct omap_hwmod omap44xx_timer6_hwmod = {
.name = "timer6",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_timer6_irqs,
.main_clk = "timer6_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer6_slaves,
@@ -4375,11 +4644,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = {
static struct omap_hwmod omap44xx_timer7_hwmod = {
.name = "timer7",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_timer7_irqs,
.main_clk = "timer7_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer7_slaves,
@@ -4439,11 +4711,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = {
static struct omap_hwmod omap44xx_timer8_hwmod = {
.name = "timer8",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_timer8_irqs,
.main_clk = "timer8_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer8_slaves,
@@ -4484,11 +4759,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = {
static struct omap_hwmod omap44xx_timer9_hwmod = {
.name = "timer9",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer9_irqs,
.main_clk = "timer9_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer9_slaves,
@@ -4529,11 +4807,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = {
static struct omap_hwmod omap44xx_timer10_hwmod = {
.name = "timer10",
.class = &omap44xx_timer_1ms_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer10_irqs,
.main_clk = "timer10_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer10_slaves,
@@ -4574,11 +4855,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = {
static struct omap_hwmod omap44xx_timer11_hwmod = {
.name = "timer11",
.class = &omap44xx_timer_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_timer11_irqs,
.main_clk = "timer11_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_timer11_slaves,
@@ -4647,12 +4931,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
static struct omap_hwmod omap44xx_uart1_hwmod = {
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_uart1_irqs,
.sdma_reqs = omap44xx_uart1_sdma_reqs,
.main_clk = "uart1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_uart1_slaves,
@@ -4699,12 +4986,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
static struct omap_hwmod omap44xx_uart2_hwmod = {
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_uart2_irqs,
.sdma_reqs = omap44xx_uart2_sdma_reqs,
.main_clk = "uart2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_uart2_slaves,
@@ -4751,13 +5041,16 @@ static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
static struct omap_hwmod omap44xx_uart3_hwmod = {
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
.mpu_irqs = omap44xx_uart3_irqs,
.sdma_reqs = omap44xx_uart3_sdma_reqs,
.main_clk = "uart3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_uart3_slaves,
@@ -4804,12 +5097,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
static struct omap_hwmod omap44xx_uart4_hwmod = {
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_uart4_irqs,
.sdma_reqs = omap44xx_uart4_sdma_reqs,
.main_clk = "uart4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_uart4_slaves,
@@ -4882,12 +5178,15 @@ static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = {
static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = {
.name = "usb_otg_hs",
.class = &omap44xx_usb_otg_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.mpu_irqs = omap44xx_usb_otg_hs_irqs,
.main_clk = "usb_otg_hs_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
},
},
.opt_clks = usb_otg_hs_opt_clks,
@@ -4955,11 +5254,14 @@ static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
.name = "wd_timer2",
.class = &omap44xx_wd_timer_hwmod_class,
+ .clkdm_name = "l4_wkup_clkdm",
.mpu_irqs = omap44xx_wd_timer2_irqs,
.main_clk = "wd_timer2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_wd_timer2_slaves,
@@ -5019,11 +5321,14 @@ static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.name = "wd_timer3",
.class = &omap44xx_wd_timer_hwmod_class,
+ .clkdm_name = "abe_clkdm",
.mpu_irqs = omap44xx_wd_timer3_irqs,
.main_clk = "wd_timer3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.slaves = omap44xx_wd_timer3_slaves,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 49486f522dca..472bf22d5e84 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -106,8 +106,9 @@ static void omap2_init_processor_devices(void)
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
{
u32 cur_state;
- int sleep_switch = 0;
+ int sleep_switch = -1;
int ret = 0;
+ int hwsup = 0;
if (pwrdm == NULL || IS_ERR(pwrdm))
return -EINVAL;
@@ -127,8 +128,8 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
sleep_switch = LOWPOWERSTATE_SWITCH;
} else {
+ hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
- pwrdm_wait_transition(pwrdm);
sleep_switch = FORCEWAKEUP_SWITCH;
}
}
@@ -142,7 +143,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
switch (sleep_switch) {
case FORCEWAKEUP_SWITCH:
- if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO)
+ if (hwsup)
clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
else
clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
@@ -154,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
return ret;
}
- pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
err:
return ret;
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 9af08473bf10..ef71fdd40fc4 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
/**
* pwrdm_init - set up the powerdomain layer
- * @pwrdm_list: array of struct powerdomain pointers to register
+ * @pwrdms: array of struct powerdomain pointers to register
* @custom_funcs: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdm_list, registering all
- * that are available on the current CPU. If pwrdm_list is supplied
- * and not null, all of the referenced powerdomains will be
- * registered. No return value. XXX pwrdm_list is not really a
- * "list"; it is an array. Rename appropriately.
+ * Loop through the array of powerdomains @pwrdms, registering all
+ * that are available on the current CPU. Also, program all
+ * powerdomain target state as ON; this is to prevent domains from
+ * hitting low power states (if bootloader has target states set to
+ * something other than ON) and potentially even losing context while
+ * PM is not fully initialized. The PM late init code can then program
+ * the desired target state for all the power domains. No return
+ * value.
*/
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs)
+void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
{
struct powerdomain **p = NULL;
+ struct powerdomain *temp_p;
if (!custom_funcs)
WARN(1, "powerdomain: No custom pwrdm functions registered\n");
else
arch_pwrdm = custom_funcs;
- if (pwrdm_list) {
- for (p = pwrdm_list; *p; p++)
+ if (pwrdms) {
+ for (p = pwrdms; *p; p++)
_pwrdm_register(*p);
}
+
+ list_for_each_entry(temp_p, &pwrdm_list, node)
+ pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
}
/**
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 3a7e678fd5f1..247e79495115 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP4 Power domains framework
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Nokia Corporation
*
* Abhijit Pagare (abhijitpagare@ti.com)
@@ -41,14 +41,14 @@ static struct powerdomain core_44xx_pwrdm = {
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF, /* core_nret_bank */
- [1] = PWRSTS_OFF_RET, /* core_ocmram */
+ [1] = PWRSTS_RET, /* core_ocmram */
[2] = PWRSTS_RET, /* core_other_bank */
[3] = PWRSTS_OFF_RET, /* ducati_l2ram */
[4] = PWRSTS_OFF_RET, /* ducati_unicache */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* core_nret_bank */
- [1] = PWRSTS_OFF_RET, /* core_ocmram */
+ [1] = PWRSTS_ON, /* core_ocmram */
[2] = PWRSTS_ON, /* core_other_bank */
[3] = PWRSTS_ON, /* ducati_l2ram */
[4] = PWRSTS_ON, /* ducati_unicache */
@@ -205,7 +205,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
- .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
.pwrsts_mem_ret = {
@@ -318,6 +318,7 @@ static struct powerdomain cefuse_44xx_pwrdm = {
.prcm_partition = OMAP4430_PRM_PARTITION,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/*
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 6be14389e4f3..2e40a5cf0163 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -70,7 +70,7 @@ static void omap_prcm_arch_reset(char mode, const char *cmd)
prcm_offs = OMAP3430_GR_MOD;
omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
} else if (cpu_is_omap44xx()) {
- omap4_prm_global_warm_sw_reset(); /* never returns */
+ omap4_prminst_global_warm_sw_reset(); /* never returns */
} else {
WARN_ON(1);
}
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 6d2776f6fc08..3cb247bebdaa 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -283,6 +283,14 @@
#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT 10
#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK (0x3 << 10)
+/* Used by PRM_DEVICE_OFF_CTRL */
+#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT 8
+#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK (1 << 8)
+
+/* Used by PRM_DEVICE_OFF_CTRL */
+#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT 9
+#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK (1 << 9)
+
/* Used by RM_MPU_RSTST */
#define OMAP4430_EMULATION_RST_SHIFT 0
#define OMAP4430_EMULATION_RST_MASK (1 << 0)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a2a04bfa9628..00165558fc4d 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -1,7 +1,7 @@
/*
* OMAP4 PRM module functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
@@ -24,12 +24,6 @@
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET 4
-
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
@@ -56,140 +50,3 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
return v;
}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-/* XXX deprecated */
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
-{
- u32 v;
-
- v = __raw_readl(reg);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-/* XXX deprecated */
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
-{
- u32 v;
-
- v = __raw_readl(reg);
- v &= ~mask;
- v |= bits;
- __raw_writel(v, reg);
-
- return v;
-}
-
-u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 reg)
-{
- return omap4_prm_rmw_inst_reg_bits(bits, bits, inst, reg);
-}
-
-u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg)
-{
- return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg);
-}
-
-/**
- * omap4_prm_is_hardreset_asserted - read the HW reset line state of
- * submodules contained in the hwmod module
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to check
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
- * 0 if the (sub)module hardreset line is not currently asserted, or
- * -EINVAL upon parameter error.
- */
-int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
-{
- if (!cpu_is_omap44xx() || !rstctrl_reg)
- return -EINVAL;
-
- return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
-}
-
-/**
- * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to assert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP. These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block. This function will
- * place the submodule into reset. Returns 0 upon success or -EINVAL
- * upon an argument error.
- */
-int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
-{
- u32 mask;
-
- if (!cpu_is_omap44xx() || !rstctrl_reg)
- return -EINVAL;
-
- mask = 1 << shift;
- omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
-
- return 0;
-}
-
-/**
- * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to deassert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP. These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block. This function will
- * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning. Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
- */
-int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
-{
- u32 mask;
- void __iomem *rstst_reg;
- int c;
-
- if (!cpu_is_omap44xx() || !rstctrl_reg)
- return -EINVAL;
-
- rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
-
- mask = 1 << shift;
-
- /* Check the current status to avoid de-asserting the line twice */
- if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
- return -EEXIST;
-
- /* Clear the reset status by writing 1 to the status bit */
- omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
- /* de-assert the reset control line */
- omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
- /* wait the status to be set */
- omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
- MAX_MODULE_HARDRESET_WAIT, c);
-
- return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
-}
-
-void omap4_prm_global_warm_sw_reset(void)
-{
- u32 v;
-
- v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
- OMAP4_RM_RSTCTRL);
- v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
- omap4_prm_write_inst_reg(v, OMAP4430_PRM_DEVICE_INST,
- OMAP4_RM_RSTCTRL);
-
- /* OCP barrier */
- v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
- OMAP4_RM_RSTCTRL);
-}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 6e53120fd6cb..7dfa379b625d 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -750,16 +750,6 @@
extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-extern u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
-extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx);
-extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx);
-extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
-
-extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
-extern int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
-extern int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
-
-extern void omap4_prm_global_warm_sw_reset(void);
# endif
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index a30324297278..3a7bab16edd5 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -2,6 +2,7 @@
* OMAP4 PRM instance functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -53,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
/* Read-modify-write a register in PRM. Caller must lock */
u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
- s16 idx)
+ u16 idx)
{
u32 v;
@@ -64,3 +65,112 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
return v;
}
+
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET 4
+
+/**
+ * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
+ v &= 1 << shift;
+ v >>= shift;
+
+ return v;
+}
+
+/**
+ * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs)
+{
+ u32 mask = 1 << shift;
+
+ omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
+
+ return 0;
+}
+
+/**
+ * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
+ * wait
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs)
+{
+ int c;
+ u32 mask = 1 << shift;
+ u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
+ rstctrl_offs) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
+ rstst_offs);
+ /* de-assert the reset control line */
+ omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
+ /* wait the status to be set */
+ omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
+ rstst_offs),
+ MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
+
+void omap4_prminst_global_warm_sw_reset(void)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_RSTCTRL_OFFSET);
+ v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
+ omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_RSTCTRL_OFFSET);
+
+ /* OCP barrier */
+ v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_RSTCTRL_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index 02dd66ddda8b..46f2efb36596 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -2,6 +2,7 @@
* OMAP4 Power/Reset Management (PRM) function prototypes
*
* Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -18,8 +19,15 @@
extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
- s16 inst, s16 idx);
+ s16 inst, u16 idx);
-extern void omap4_prm_global_warm_sw_reset(void);
+extern void omap4_prminst_global_warm_sw_reset(void);
+
+extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs);
+extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs);
+extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs);
#endif
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index f56b1bd41f28..f49804f181d4 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm)
sr_v2_disable(sr);
}
- pm_runtime_put_sync(&sr->pdev->dev);
+ pm_runtime_put_sync_suspend(&sr->pdev->dev);
}
/**
@@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
sr_info->pdev = pdev;
sr_info->srid = pdev->id;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e9640728239b..cf1de7d2630d 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
- __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
+ __omap_dm_timer_load_start(clksrc.io_base,
+ OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 3aaa46f6cd12..daa056ed8738 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
-static struct twl4030_usb_data omap4_usb_pdata = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
-};
-
+#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -80,11 +73,11 @@ static struct twl4030_madc_platform_data omap3_madc_pdata = {
.irq_line = 1,
};
-static struct twl4030_codec_audio_data omap3_audio;
+static struct twl4030_codec_data omap3_codec;
-static struct twl4030_codec_data omap3_codec_pdata = {
+static struct twl4030_audio_data omap3_audio_pdata = {
.audio_mclk = 26000000,
- .audio = &omap3_audio,
+ .codec = &omap3_codec,
};
static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
@@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = {
.consumer_supplies = omap3_vpll2_supplies,
};
+void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags)
+{
+ if (!pmic_data->irq_base)
+ pmic_data->irq_base = TWL4030_IRQ_BASE;
+ if (!pmic_data->irq_end)
+ pmic_data->irq_end = TWL4030_IRQ_END;
+
+ /* Common platform data configurations */
+ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+ pmic_data->usb = &omap3_usb_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
+ pmic_data->bci = &omap3_bci_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
+ pmic_data->madc = &omap3_madc_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
+ pmic_data->audio = &omap3_audio_pdata;
+
+ /* Common regulator configurations */
+ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+ pmic_data->vdac = &omap3_vdac_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+ pmic_data->vpll2 = &omap3_vpll2_idata;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct twl4030_usb_data omap4_usb_pdata = {
+ .phy_init = omap4430_phy_init,
+ .phy_exit = omap4430_phy_exit,
+ .phy_power = omap4430_phy_power,
+ .phy_set_clock = omap4430_phy_set_clk,
+ .phy_suspend = omap4430_phy_suspend,
+};
+
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
@@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
!pmic_data->clk32kg)
pmic_data->clk32kg = &omap4_clk32kg_idata;
}
-
-void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
- u32 pdata_flags, u32 regulators_flags)
-{
- if (!pmic_data->irq_base)
- pmic_data->irq_base = TWL4030_IRQ_BASE;
- if (!pmic_data->irq_end)
- pmic_data->irq_end = TWL4030_IRQ_END;
-
- /* Common platform data configurations */
- if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
- pmic_data->usb = &omap3_usb_pdata;
-
- if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
- pmic_data->bci = &omap3_bci_pdata;
-
- if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
- pmic_data->madc = &omap3_madc_pdata;
-
- if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
- pmic_data->codec = &omap3_codec_pdata;
-
- /* Common regulator configurations */
- if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
- pmic_data->vdac = &omap3_vdac_idata;
-
- if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
- pmic_data->vpll2 = &omap3_vpll2_idata;
-}
+#endif /* CONFIG_ARCH_OMAP4 */
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f2b2b35e8646..3e5499dda49a 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -51,7 +51,7 @@ void orion5x_pci_disable(void);
void orion5x_pci_set_cardbus_mode(void);
int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
-int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
struct machine_desc;
struct meminfo;
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index f95d3cb01cbf..a3e3e9e5e328 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -237,7 +237,8 @@ void __init db88f5281_pci_preinit(void)
}
}
-static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 855e0e77d563..c105556a0ee1 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -70,7 +70,7 @@ enum {
* PCI setup
*/
-static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
index e51aaf4bf2b5..395735482473 100644
--- a/arch/arm/mach-orion5x/include/mach/hardware.h
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -11,11 +11,4 @@
#include "orion5x.h"
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE
-
-
#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index c0eb6462633f..00381249d766 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -119,7 +119,8 @@ static struct platform_device kurobox_pro_nor_flash = {
* PCI
****************************************************************************/
-static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 59263b73d1e4..ef3bb8e9a4c2 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -73,7 +73,7 @@ static struct platform_device mss2_nor_flash = {
/****************************************************************************
* PCI setup
****************************************************************************/
-static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index e8706f15a670..bc4a920e26ee 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
@@ -560,6 +561,8 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
+ vga_base = ORION5X_PCIE_MEM_PHYS_BASE;
+
if (nr == 0) {
orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
ret = pcie_setup(sys);
@@ -587,7 +590,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
return bus;
}
-int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int bus = dev->bus->number;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9eec7c2375e9..291d22bf44c9 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -131,7 +131,7 @@ static void __init rd88f5181l_fxo_init(void)
}
static int __init
-rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 0cc90bbfd326..3f02362e1632 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -140,7 +140,7 @@ static void __init rd88f5181l_ge_init(void)
}
static int __init
-rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 48da39b9bdb0..27fd38e658bd 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -172,7 +172,8 @@ void __init rd88f5182_pci_preinit(void)
}
}
-static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29ce826c3c21..a34e4fac72b0 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -100,7 +100,7 @@ void __init tsp2_pci_preinit(void)
}
}
-static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 47162fd5f044..c9831614e355 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -143,7 +143,8 @@ void __init qnap_ts209_pci_preinit(void)
}
}
-static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 5aacc7ac5cf4..cc33b2222bad 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -121,7 +121,8 @@ static struct platform_device qnap_ts409_nor_flash = {
* PCI
****************************************************************************/
-static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 444a1c7fdfd6..2653595f901c 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -133,7 +133,8 @@ static void __init wnr854t_init(void)
platform_device_register(&wnr854t_nor_flash);
}
-static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index d1952be0ae1c..251ef1543e53 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -221,7 +221,8 @@ static void __init wrt350n_v2_init(void)
platform_device_register(&wrt350n_v2_button_device);
}
-static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
int irq;
diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
new file mode 100644
index 000000000000..7af7fc05d565
--- /dev/null
+++ b/arch/arm/mach-prima2/Makefile
@@ -0,0 +1,7 @@
+obj-y := timer.o
+obj-y += irq.o
+obj-y += clock.o
+obj-y += rstc.o
+obj-y += prima2.o
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_CACHE_L2X0) += l2x0.o
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
new file mode 100644
index 000000000000..d023db3ae4ff
--- /dev/null
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
new file mode 100644
index 000000000000..615a4e75ceab
--- /dev/null
+++ b/arch/arm/mach-prima2/clock.c
@@ -0,0 +1,510 @@
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/mach/map.h>
+#include <mach/map.h>
+
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0014
+#define SIRFSOC_CLKC_CPU_CFG 0x0018
+#define SIRFSOC_CLKC_MEM_CFG 0x001c
+#define SIRFSOC_CLKC_SYS_CFG 0x0020
+#define SIRFSOC_CLKC_IO_CFG 0x0024
+#define SIRFSOC_CLKC_DSP_CFG 0x0028
+#define SIRFSOC_CLKC_GFX_CFG 0x002c
+#define SIRFSOC_CLKC_MM_CFG 0x0030
+#define SIRFSOC_LKC_LCD_CFG 0x0034
+#define SIRFSOC_CLKC_MMC_CFG 0x0038
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
+#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
+#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
+
+#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000)
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+struct clk_ops {
+ unsigned long (*get_rate)(struct clk *clk);
+ long (*round_rate)(struct clk *clk, unsigned long rate);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
+ int (*enable)(struct clk *clk);
+ int (*disable)(struct clk *clk);
+ struct clk *(*get_parent)(struct clk *clk);
+ int (*set_parent)(struct clk *clk, struct clk *parent);
+};
+
+struct clk {
+ struct clk *parent; /* parent clk */
+ unsigned long rate; /* clock rate in Hz */
+ signed char usage; /* clock enable count */
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+ unsigned short regofs; /* register offset */
+ struct clk_ops *ops; /* clock operation */
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static inline unsigned long clkc_readl(unsigned reg)
+{
+ return readl(SIRFSOC_CLOCK_VA_BASE + reg);
+}
+
+static inline void clkc_writel(u32 val, unsigned reg)
+{
+ writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
+}
+
+/*
+ * osc_rtc - real time oscillator - 32.768KHz
+ * osc_sys - high speed oscillator - 26MHz
+ */
+
+static struct clk clk_rtc = {
+ .rate = 32768,
+};
+
+static struct clk clk_osc = {
+ .rate = 26 * MHZ,
+};
+
+/*
+ * std pll
+ */
+static unsigned long std_pll_get_rate(struct clk *clk)
+{
+ unsigned long fin = clk_get_rate(clk->parent);
+ u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
+ SIRFSOC_CLKC_PLL1_CFG0;
+
+ if (clkc_readl(regcfg2) & BIT(2)) {
+ /* pll bypass mode */
+ clk->rate = fin;
+ } else {
+ /* fout = fin * nf / nr / od */
+ u32 cfg0 = clkc_readl(clk->regofs);
+ u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
+ u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
+ u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
+ WARN_ON(fin % MHZ);
+ clk->rate = fin / MHZ * nf / nr / od * MHZ;
+ }
+
+ return clk->rate;
+}
+
+static int std_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long fin, nf, nr, od, reg;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+
+ nf = rate / MHZ;
+ if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
+ return -EINVAL;
+
+ fin = clk_get_rate(clk->parent);
+ BUG_ON(fin < MHZ);
+
+ nr = fin / MHZ;
+ BUG_ON((fin % MHZ) || nr > BIT(6));
+
+ od = 1;
+
+ reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
+ clkc_writel(reg, clk->regofs);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
+ clkc_writel((nf >> 1) - 1, reg);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
+ while (!(clkc_readl(reg) & BIT(6)))
+ cpu_relax();
+
+ clk->rate = 0; /* set to zero will force recalculation */
+ return 0;
+}
+
+static struct clk_ops std_pll_ops = {
+ .get_rate = std_pll_get_rate,
+ .set_rate = std_pll_set_rate,
+};
+
+static struct clk clk_pll1 = {
+ .parent = &clk_osc,
+ .regofs = SIRFSOC_CLKC_PLL1_CFG0,
+ .ops = &std_pll_ops,
+};
+
+static struct clk clk_pll2 = {
+ .parent = &clk_osc,
+ .regofs = SIRFSOC_CLKC_PLL2_CFG0,
+ .ops = &std_pll_ops,
+};
+
+static struct clk clk_pll3 = {
+ .parent = &clk_osc,
+ .regofs = SIRFSOC_CLKC_PLL3_CFG0,
+ .ops = &std_pll_ops,
+};
+
+/*
+ * clock domains - cpu, mem, sys/io
+ */
+
+static struct clk clk_mem;
+
+static struct clk *dmn_get_parent(struct clk *clk)
+{
+ struct clk *clks[] = {
+ &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
+ };
+ u32 cfg = clkc_readl(clk->regofs);
+ WARN_ON((cfg & (BIT(3) - 1)) > 4);
+ return clks[cfg & (BIT(3) - 1)];
+}
+
+static int dmn_set_parent(struct clk *clk, struct clk *parent)
+{
+ const struct clk *clks[] = {
+ &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
+ };
+ u32 cfg = clkc_readl(clk->regofs);
+ int i;
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ if (clks[i] == parent) {
+ cfg &= ~(BIT(3) - 1);
+ clkc_writel(cfg | i, clk->regofs);
+ /* BIT(3) - switching status: 1 - busy, 0 - done */
+ while (clkc_readl(clk->regofs) & BIT(3))
+ cpu_relax();
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static unsigned long dmn_get_rate(struct clk *clk)
+{
+ unsigned long fin = clk_get_rate(clk->parent);
+ u32 cfg = clkc_readl(clk->regofs);
+ if (cfg & BIT(24)) {
+ /* fcd bypass mode */
+ clk->rate = fin;
+ } else {
+ /*
+ * wait count: bit[19:16], hold count: bit[23:20]
+ */
+ u32 wait = (cfg >> 16) & (BIT(4) - 1);
+ u32 hold = (cfg >> 20) & (BIT(4) - 1);
+
+ clk->rate = fin / (wait + hold + 2);
+ }
+
+ return clk->rate;
+}
+
+static int dmn_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long fin;
+ unsigned ratio, wait, hold, reg;
+ unsigned bits = (clk == &clk_mem) ? 3 : 4;
+
+ fin = clk_get_rate(clk->parent);
+ ratio = fin / rate;
+
+ if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
+ return -EINVAL;
+
+ WARN_ON(fin % rate);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ reg = clkc_readl(clk->regofs);
+ reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
+ reg |= (wait << 16) | (hold << 20) | BIT(25);
+ clkc_writel(reg, clk->regofs);
+
+ /* waiting FCD been effective */
+ while (clkc_readl(clk->regofs) & BIT(25))
+ cpu_relax();
+
+ clk->rate = 0; /* set to zero will force recalculation */
+
+ return 0;
+}
+
+/*
+ * cpu clock has no FCD register in Prima2, can only change pll
+ */
+static int cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret1, ret2;
+ struct clk *cur_parent, *tmp_parent;
+
+ cur_parent = dmn_get_parent(clk);
+ BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
+
+ /* switch to tmp pll before setting parent clock's rate */
+ tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
+ ret1 = dmn_set_parent(clk, tmp_parent);
+ BUG_ON(ret1);
+
+ ret2 = clk_set_rate(cur_parent, rate);
+
+ ret1 = dmn_set_parent(clk, cur_parent);
+
+ clk->rate = 0; /* set to zero will force recalculation */
+
+ return ret2 ? ret2 : ret1;
+}
+
+static struct clk_ops cpu_ops = {
+ .get_parent = dmn_get_parent,
+ .set_parent = dmn_set_parent,
+ .set_rate = cpu_set_rate,
+};
+
+static struct clk clk_cpu = {
+ .parent = &clk_pll1,
+ .regofs = SIRFSOC_CLKC_CPU_CFG,
+ .ops = &cpu_ops,
+};
+
+
+static struct clk_ops msi_ops = {
+ .set_rate = dmn_set_rate,
+ .get_rate = dmn_get_rate,
+ .set_parent = dmn_set_parent,
+ .get_parent = dmn_get_parent,
+};
+
+static struct clk clk_mem = {
+ .parent = &clk_pll2,
+ .regofs = SIRFSOC_CLKC_MEM_CFG,
+ .ops = &msi_ops,
+};
+
+static struct clk clk_sys = {
+ .parent = &clk_pll3,
+ .regofs = SIRFSOC_CLKC_SYS_CFG,
+ .ops = &msi_ops,
+};
+
+static struct clk clk_io = {
+ .parent = &clk_pll3,
+ .regofs = SIRFSOC_CLKC_IO_CFG,
+ .ops = &msi_ops,
+};
+
+/*
+ * on-chip clock sets
+ */
+static struct clk_lookup onchip_clks[] = {
+ {
+ .dev_id = "rtc",
+ .clk = &clk_rtc,
+ }, {
+ .dev_id = "osc",
+ .clk = &clk_osc,
+ }, {
+ .dev_id = "pll1",
+ .clk = &clk_pll1,
+ }, {
+ .dev_id = "pll2",
+ .clk = &clk_pll2,
+ }, {
+ .dev_id = "pll3",
+ .clk = &clk_pll3,
+ }, {
+ .dev_id = "cpu",
+ .clk = &clk_cpu,
+ }, {
+ .dev_id = "mem",
+ .clk = &clk_mem,
+ }, {
+ .dev_id = "sys",
+ .clk = &clk_sys,
+ }, {
+ .dev_id = "io",
+ .clk = &clk_io,
+ },
+};
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return -EINVAL;
+
+ if (clk->parent)
+ clk_enable(clk->parent);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (!clk->usage++ && clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return;
+
+ WARN_ON(!clk->usage);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->usage == 0 && clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ if (clk->parent)
+ clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return 0;
+
+ if (clk->rate)
+ return clk->rate;
+
+ if (clk->ops && clk->ops->get_rate)
+ return clk->ops->get_rate(clk);
+
+ return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return 0;
+
+ if (clk->ops && clk->ops->round_rate)
+ return clk->ops->round_rate(clk, rate);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return -EINVAL;
+
+ if (!clk->ops || !clk->ops->set_rate)
+ return -EINVAL;
+
+ return clk->ops->set_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret;
+ unsigned long flags;
+
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return -EINVAL;
+
+ if (!clk->ops || !clk->ops->set_parent)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->ops->set_parent(clk, parent);
+ if (!ret) {
+ parent->usage += clk->usage;
+ clk->parent->usage -= clk->usage;
+ BUG_ON(clk->parent->usage < 0);
+ clk->parent = parent;
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (unlikely(IS_ERR_OR_NULL(clk)))
+ return NULL;
+
+ if (!clk->ops || !clk->ops->get_parent)
+ return clk->parent;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ clk->parent = clk->ops->get_parent(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static void __init sirfsoc_clk_init(void)
+{
+ clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
+}
+
+static struct of_device_id clkc_ids[] = {
+ { .compatible = "sirf,prima2-clkc" },
+ {},
+};
+
+void __init sirfsoc_of_clk_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ struct map_desc sirfsoc_clkc_iodesc = {
+ .virtual = SIRFSOC_CLOCK_VA_BASE,
+ .type = MT_DEVICE,
+ };
+
+ np = of_find_matching_node(NULL, clkc_ids);
+ if (!np)
+ panic("unable to find compatible clkc node in dtb\n");
+
+ if (of_address_to_resource(np, 0, &res))
+ panic("unable to find clkc range in dtb");
+ of_node_put(np);
+
+ sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
+ sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
+
+ iotable_init(&sirfsoc_clkc_iodesc, 1);
+
+ sirfsoc_clk_init();
+}
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
new file mode 100644
index 000000000000..83e5d2128118
--- /dev/null
+++ b/arch/arm/mach-prima2/common.h
@@ -0,0 +1,26 @@
+/*
+ * This file contains common function prototypes to avoid externs in the c files.
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_PRIMA2_COMMON_H__
+#define __MACH_PRIMA2_COMMON_H__
+
+#include <linux/init.h>
+#include <asm/mach/time.h>
+
+extern struct sys_timer sirfsoc_timer;
+
+extern void __init sirfsoc_of_irq_init(void);
+extern void __init sirfsoc_of_clk_init(void);
+
+#ifndef CONFIG_DEBUG_LL
+static inline void sirfsoc_map_lluart(void) {}
+#else
+extern void __init sirfsoc_map_lluart(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/clkdev.h b/arch/arm/mach-prima2/include/mach/clkdev.h
new file mode 100644
index 000000000000..66932518b1b7
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/clkdev.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-prima2/include/mach/clkdev.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
new file mode 100644
index 000000000000..bf75106333ff
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-prima2/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <mach/hardware.h>
+#include <mach/uart.h>
+
+ .macro addruart, rp, rv
+ ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
+ ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
+ tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY
+ beq 1001b
+ .endm
+
diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S
new file mode 100644
index 000000000000..1c8a50f102a7
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-prima2/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <mach/hardware.h>
+
+#define SIRFSOC_INT_ID 0x38
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =sirfsoc_intc_base
+ ldr \base, [\base]
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq
+ cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
+ movges \irqnr, #0
+ .endm
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
diff --git a/arch/arm/mach-prima2/include/mach/hardware.h b/arch/arm/mach-prima2/include/mach/hardware.h
new file mode 100644
index 000000000000..105b96964f25
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-prima2/include/mach/hardware.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_HARDWARE_H__
+#define __MACH_HARDWARE_H__
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/io.h b/arch/arm/mach-prima2/include/mach/io.h
new file mode 100644
index 000000000000..6c31e9ec279e
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/io.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-prima2/include/mach/io.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_PRIMA2_IO_H
+#define __MACH_PRIMA2_IO_H
+
+#define IO_SPACE_LIMIT ((resource_size_t)0)
+
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h
new file mode 100644
index 000000000000..bb354f952fd6
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/irqs.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-prima2/include/mach/irqs.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define SIRFSOC_INTENAL_IRQ_START 0
+#define SIRFSOC_INTENAL_IRQ_END 59
+
+#define NR_IRQS 220
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h
new file mode 100644
index 000000000000..66b1ae2e553f
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/map.h
@@ -0,0 +1,16 @@
+/*
+ * memory & I/O static mapping definitions for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_PRIMA2_MAP_H__
+#define __MACH_PRIMA2_MAP_H__
+
+#include <mach/vmalloc.h>
+
+#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000))
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
new file mode 100644
index 000000000000..368cd5a0601a
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/memory.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-prima2/include/mach/memory.h
+ *
+ * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PLAT_PHYS_OFFSET UL(0x00000000)
+
+/*
+ * Restrict DMA-able region to workaround silicon limitation.
+ * The limitation restricts buffers available for DMA to SD/MMC
+ * hardware to be below 256MB
+ */
+#define ARM_DMA_ZONE_SIZE (SZ_256M)
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
new file mode 100644
index 000000000000..0dbd257ad16d
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-prima2/include/mach/system.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_SYSTEM_H__
+#define __MACH_SYSTEM_H__
+
+#include <linux/bitops.h>
+#include <mach/hardware.h>
+
+#define SIRFSOC_SYS_RST_BIT BIT(31)
+
+extern void __iomem *sirfsoc_rstc_base;
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
+}
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/timex.h b/arch/arm/mach-prima2/include/mach/timex.h
new file mode 100644
index 000000000000..d6f98a75e562
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/timex.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-prima2/include/mach/timex.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_TIMEX_H__
+#define __MACH_TIMEX_H__
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h
new file mode 100644
index 000000000000..c98b4d5ac24a
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/uart.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-prima2/include/mach/uart.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_PRIMA2_SIRFSOC_UART_H
+#define __MACH_PRIMA2_SIRFSOC_UART_H
+
+/* UART-1: used as serial debug port */
+#define SIRFSOC_UART1_PA_BASE 0xb0060000
+#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
+#define SIRFSOC_UART1_SIZE SZ_4K
+
+#define SIRFSOC_UART_TXFIFO_STATUS 0x0114
+#define SIRFSOC_UART_TXFIFO_DATA 0x0118
+
+#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5)
+#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6)
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
new file mode 100644
index 000000000000..83125c6a30b3
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-prima2/include/mach/uncompress.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/uart.h>
+
+void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+static __inline__ void putc(char c)
+{
+ /*
+ * during kernel decompression, all mappings are flat:
+ * virt_addr == phys_addr
+ */
+ while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
+ & SIRFSOC_UART1_TXFIFO_FULL)
+ barrier();
+
+ __raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+#endif
+
diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h
new file mode 100644
index 000000000000..c9f90fec78e3
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/ach-prima2/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <linux/const.h>
+
+#define VMALLOC_END _AC(0xFEC00000, UL)
+
+#endif
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
new file mode 100644
index 000000000000..7af254d046ba
--- /dev/null
+++ b/arch/arm/mach-prima2/irq.c
@@ -0,0 +1,72 @@
+/*
+ * interrupt controller support for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SIRFSOC_INT_RISC_MASK0 0x0018
+#define SIRFSOC_INT_RISC_MASK1 0x001C
+#define SIRFSOC_INT_RISC_LEVEL0 0x0020
+#define SIRFSOC_INT_RISC_LEVEL1 0x0024
+
+void __iomem *sirfsoc_intc_base;
+
+static __init void
+sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq);
+ ct = gc->chip_types;
+
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->regs.mask = SIRFSOC_INT_RISC_MASK0;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0);
+}
+
+static __init void sirfsoc_irq_init(void)
+{
+ sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
+ sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
+
+ writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
+ writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
+
+ writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
+ writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
+}
+
+static struct of_device_id intc_ids[] = {
+ { .compatible = "sirf,prima2-intc" },
+ {},
+};
+
+void __init sirfsoc_of_irq_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, intc_ids);
+ if (!np)
+ panic("unable to find compatible intc node in dtb\n");
+
+ sirfsoc_intc_base = of_iomap(np, 0);
+ if (!sirfsoc_intc_base)
+ panic("unable to map intc cpu registers\n");
+
+ of_node_put(np);
+
+ sirfsoc_irq_init();
+}
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
new file mode 100644
index 000000000000..9cda2057bcfb
--- /dev/null
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -0,0 +1,59 @@
+/*
+ * l2 cache initialization for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/memory.h>
+
+#define L2X0_ADDR_FILTERING_START 0xC00
+#define L2X0_ADDR_FILTERING_END 0xC04
+
+static struct of_device_id l2x_ids[] = {
+ { .compatible = "arm,pl310-cache" },
+};
+
+static int __init sirfsoc_of_l2x_init(void)
+{
+ struct device_node *np;
+ void __iomem *sirfsoc_l2x_base;
+
+ np = of_find_matching_node(NULL, l2x_ids);
+ if (!np)
+ panic("unable to find compatible l2x node in dtb\n");
+
+ sirfsoc_l2x_base = of_iomap(np, 0);
+ if (!sirfsoc_l2x_base)
+ panic("unable to map l2x cpu registers\n");
+
+ of_node_put(np);
+
+ if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) {
+ /*
+ * set the physical memory windows L2 cache will cover
+ */
+ writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
+ sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
+ writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
+ sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
+
+ writel_relaxed(0,
+ sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL);
+ writel_relaxed(0,
+ sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL);
+ }
+ l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000,
+ 0x00000000);
+
+ return 0;
+}
+early_initcall(sirfsoc_of_l2x_init);
diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c
new file mode 100644
index 000000000000..a89f9b3c8cc5
--- /dev/null
+++ b/arch/arm/mach-prima2/lluart.c
@@ -0,0 +1,25 @@
+/*
+ * Static memory mapping for DEBUG_LL
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/map.h>
+#include <mach/uart.h>
+
+void __init sirfsoc_map_lluart(void)
+{
+ struct map_desc sirfsoc_lluart_map = {
+ .virtual = SIRFSOC_UART1_VA_BASE,
+ .pfn = __phys_to_pfn(SIRFSOC_UART1_PA_BASE),
+ .length = SIRFSOC_UART1_SIZE,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&sirfsoc_lluart_map, 1);
+}
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
new file mode 100644
index 000000000000..f57124bdd143
--- /dev/null
+++ b/arch/arm/mach-prima2/prima2.c
@@ -0,0 +1,41 @@
+/*
+ * Defines machines for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include "common.h"
+
+static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+void __init sirfsoc_mach_init(void)
+{
+ of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
+}
+
+static const char *prima2cb_dt_match[] __initdata = {
+ "sirf,prima2-cb",
+ NULL
+};
+
+MACHINE_START(PRIMA2_EVB, "prima2cb")
+ /* Maintainer: Barry Song <baohua.song@csr.com> */
+ .boot_params = 0x00000100,
+ .init_early = sirfsoc_of_clk_init,
+ .map_io = sirfsoc_map_lluart,
+ .init_irq = sirfsoc_of_irq_init,
+ .timer = &sirfsoc_timer,
+ .init_machine = sirfsoc_mach_init,
+ .dt_compat = prima2cb_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
new file mode 100644
index 000000000000..492cfa8d2610
--- /dev/null
+++ b/arch/arm/mach-prima2/rstc.c
@@ -0,0 +1,70 @@
+/*
+ * reset controller for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+void __iomem *sirfsoc_rstc_base;
+static DEFINE_MUTEX(rstc_lock);
+
+static struct of_device_id rstc_ids[] = {
+ { .compatible = "sirf,prima2-rstc" },
+ {},
+};
+
+static int __init sirfsoc_of_rstc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, rstc_ids);
+ if (!np)
+ panic("unable to find compatible rstc node in dtb\n");
+
+ sirfsoc_rstc_base = of_iomap(np, 0);
+ if (!sirfsoc_rstc_base)
+ panic("unable to map rstc cpu registers\n");
+
+ of_node_put(np);
+
+ return 0;
+}
+early_initcall(sirfsoc_of_rstc_init);
+
+int sirfsoc_reset_device(struct device *dev)
+{
+ const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
+ unsigned int reset_bit;
+
+ if (!prop)
+ return -ENODEV;
+
+ reset_bit = be32_to_cpup(prop);
+
+ mutex_lock(&rstc_lock);
+
+ /*
+ * Writing 1 to this bit resets corresponding block. Writing 0 to this
+ * bit de-asserts reset signal of the corresponding block.
+ * datasheet doesn't require explicit delay between the set and clear
+ * of reset bit. it could be shorter if tests pass.
+ */
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
+ msleep(10);
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
+
+ mutex_unlock(&rstc_lock);
+
+ return 0;
+}
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
new file mode 100644
index 000000000000..ed7ec48d11da
--- /dev/null
+++ b/arch/arm/mach-prima2/timer.c
@@ -0,0 +1,218 @@
+/*
+ * System timer for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <mach/map.h>
+#include <asm/mach/time.h>
+
+#define SIRFSOC_TIMER_COUNTER_LO 0x0000
+#define SIRFSOC_TIMER_COUNTER_HI 0x0004
+#define SIRFSOC_TIMER_MATCH_0 0x0008
+#define SIRFSOC_TIMER_MATCH_1 0x000C
+#define SIRFSOC_TIMER_MATCH_2 0x0010
+#define SIRFSOC_TIMER_MATCH_3 0x0014
+#define SIRFSOC_TIMER_MATCH_4 0x0018
+#define SIRFSOC_TIMER_MATCH_5 0x001C
+#define SIRFSOC_TIMER_STATUS 0x0020
+#define SIRFSOC_TIMER_INT_EN 0x0024
+#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028
+#define SIRFSOC_TIMER_DIV 0x002C
+#define SIRFSOC_TIMER_LATCH 0x0030
+#define SIRFSOC_TIMER_LATCHED_LO 0x0034
+#define SIRFSOC_TIMER_LATCHED_HI 0x0038
+
+#define SIRFSOC_TIMER_WDT_INDEX 5
+
+#define SIRFSOC_TIMER_LATCH_BIT BIT(0)
+
+static void __iomem *sirfsoc_timer_base;
+static void __init sirfsoc_of_timer_map(void);
+
+/* timer0 interrupt handler */
+static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+
+ WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0)));
+
+ /* clear timer0 interrupt */
+ writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
+
+ ce->event_handler(ce);
+
+ return IRQ_HANDLED;
+}
+
+/* read 64-bit timer counter */
+static cycle_t sirfsoc_timer_read(struct clocksource *cs)
+{
+ u64 cycles;
+
+ /* latch the 64-bit timer counter */
+ writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
+ cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI);
+ cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
+
+ return cycles;
+}
+
+static int sirfsoc_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ unsigned long now, next;
+
+ writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
+ now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
+ next = now + delta;
+ writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0);
+ writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
+ now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
+
+ return next - now > delta ? -ETIME : 0;
+}
+
+static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *ce)
+{
+ u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ WARN_ON(1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device sirfsoc_clockevent = {
+ .name = "sirfsoc_clockevent",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = sirfsoc_timer_set_mode,
+ .set_next_event = sirfsoc_timer_set_next_event,
+};
+
+static struct clocksource sirfsoc_clocksource = {
+ .name = "sirfsoc_clocksource",
+ .rating = 200,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = sirfsoc_timer_read,
+};
+
+static struct irqaction sirfsoc_timer_irq = {
+ .name = "sirfsoc_timer0",
+ .flags = IRQF_TIMER,
+ .irq = 0,
+ .handler = sirfsoc_timer_interrupt,
+ .dev_id = &sirfsoc_clockevent,
+};
+
+/* Overwrite weak default sched_clock with more precise one */
+unsigned long long notrace sched_clock(void)
+{
+ static int is_mapped = 0;
+
+ /*
+ * sched_clock is called earlier than .init of sys_timer
+ * if we map timer memory in .init of sys_timer, system
+ * will panic due to illegal memory access
+ */
+ if(!is_mapped) {
+ sirfsoc_of_timer_map();
+ is_mapped = 1;
+ }
+
+ return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE);
+}
+
+static void __init sirfsoc_clockevent_init(void)
+{
+ clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
+
+ sirfsoc_clockevent.max_delta_ns =
+ clockevent_delta2ns(-2, &sirfsoc_clockevent);
+ sirfsoc_clockevent.min_delta_ns =
+ clockevent_delta2ns(2, &sirfsoc_clockevent);
+
+ sirfsoc_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&sirfsoc_clockevent);
+}
+
+/* initialize the kernel jiffy timer source */
+static void __init sirfsoc_timer_init(void)
+{
+ unsigned long rate;
+
+ /* timer's input clock is io clock */
+ struct clk *clk = clk_get_sys("io", NULL);
+
+ BUG_ON(IS_ERR(clk));
+
+ rate = clk_get_rate(clk);
+
+ BUG_ON(rate < CLOCK_TICK_RATE);
+ BUG_ON(rate % CLOCK_TICK_RATE);
+
+ writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
+ writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
+
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+
+ BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+
+ sirfsoc_clockevent_init();
+}
+
+static struct of_device_id timer_ids[] = {
+ { .compatible = "sirf,prima2-tick" },
+ {},
+};
+
+static void __init sirfsoc_of_timer_map(void)
+{
+ struct device_node *np;
+ const unsigned int *intspec;
+
+ np = of_find_matching_node(NULL, timer_ids);
+ if (!np)
+ panic("unable to find compatible timer node in dtb\n");
+ sirfsoc_timer_base = of_iomap(np, 0);
+ if (!sirfsoc_timer_base)
+ panic("unable to map timer cpu registers\n");
+
+ /* Get the interrupts property */
+ intspec = of_get_property(np, "interrupts", NULL);
+ BUG_ON(!intspec);
+ sirfsoc_timer_irq.irq = be32_to_cpup(intspec);
+
+ of_node_put(np);
+}
+
+struct sys_timer sirfsoc_timer = {
+ .init = sirfsoc_timer_init,
+};
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 810a982a66f8..ef3e8b1e06c1 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3")
.map_io = balloon3_map_io,
.nr_irqs = BALLOON3_NR_IRQS,
.init_irq = balloon3_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4284513f396a..648b0ab2bf77 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -151,6 +151,7 @@ MACHINE_START(CAPC7117,
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = capc7117_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index d5152220ce94..4d466102a027 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -53,6 +53,21 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk->ops->setrate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->ops->setrate(clk, rate);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
void clk_dummy_enable(struct clk *clk)
{
}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 1f2fb9c43f06..3a258b1bf1aa 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -5,6 +5,7 @@ struct clkops {
void (*enable)(struct clk *);
void (*disable)(struct clk *);
unsigned long (*getrate)(struct clk *);
+ int (*setrate)(struct clk *, unsigned long);
};
struct clk {
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 1afc0fb7d6d5..6bf479d9b5ac 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -77,7 +77,7 @@ void cmx2xx_pci_resume(void) {}
#endif
/* PCI IRQ mapping*/
-static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -125,6 +125,9 @@ static void cmx2xx_pci_preinit(void)
{
pr_info("Initializing CM-X2XX PCI subsystem\n");
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
pr_info("PCI Bridge found.\n");
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bc55d07566ca..13cf518bbbf8 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -21,7 +21,8 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa25x.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/smemc.h>
@@ -516,6 +517,8 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
+ /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = cmx2xx_init,
#ifdef CONFIG_PCI
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b199596f9c3d..b6a51340270b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -855,6 +855,7 @@ MACHINE_START(CM_X300, "CM-X300 module")
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7545a48ed88b..870920934ecf 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -318,6 +319,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 66dd81cbc8a0..60a6781e7a8e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -187,6 +187,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ff9ff5f4fc47..d2c6631915d4 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -23,8 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include <mach/colibri.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
@@ -258,6 +257,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3a5507e31919..185a37cad254 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -722,6 +722,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -732,6 +733,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -742,6 +744,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 0481c29a70e8..fe812eafb1f1 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -22,10 +22,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
#include <mach/smemc.h>
@@ -276,6 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f8a6e9d79a3a..2e37ea52b372 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1302,6 +1302,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
@@ -1310,6 +1311,7 @@ MACHINE_START(EXEDA, "Compulab eXeda")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 2e3970fdde0b..b4599ec9d619 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -193,6 +193,7 @@ MACHINE_START(E330, "Toshiba e330")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
@@ -242,6 +243,7 @@ MACHINE_START(E350, "Toshiba e350")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
@@ -364,6 +366,7 @@ MACHINE_START(E400, "Toshiba e400")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
@@ -552,6 +555,7 @@ MACHINE_START(E740, "Toshiba e740")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
@@ -743,6 +747,7 @@ MACHINE_START(E750, "Toshiba e750")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
@@ -947,6 +952,7 @@ MACHINE_START(E800, "Toshiba e800")
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index d88aed8fbe15..b73eadb9f5dc 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -801,6 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
MACHINE_END
@@ -866,6 +867,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
MACHINE_END
@@ -931,6 +933,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
MACHINE_END
@@ -1121,6 +1124,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
MACHINE_END
@@ -1186,6 +1190,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
MACHINE_END
@@ -1225,6 +1230,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index e6c9344a95ae..92a2e85ab02c 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -13,21 +13,8 @@ struct irq_data;
struct sys_timer;
extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr,
- int (*set_wake)(struct irq_data *,
- unsigned int));
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-extern void __init pxa27x_init_irq(void);
-extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
extern void __init pxa_map_io(void);
-extern void __init pxa25x_map_io(void);
-extern void __init pxa27x_map_io(void);
-extern void __init pxa3xx_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index d65e4bde9b91..deaa111c91f9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -236,6 +236,7 @@ MACHINE_START(GUMSTIX, "Gumstix")
.boot_params = 0xa0000100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 657db469de1f..0a235128914d 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -28,6 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/irq.h>
#include <mach/pxa25x.h>
#include <mach/h5000.h>
@@ -205,6 +206,7 @@ MACHINE_START(H5400, "HP iPAQ H5000")
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index e8603eba54bd..a997d0ab2872 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -24,8 +24,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include "generic.h"
@@ -162,6 +161,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 99960a1814e0..c748a473a2ff 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -842,6 +842,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 6cedc81da3bc..d427429f1f34 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -194,6 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = icontrol_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index f7fb64f11a7d..ddf20e5c376e 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -196,6 +196,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
.map_io = idp_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-pxa/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 6957ba56025b..de63ca3016b4 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -337,9 +337,6 @@ extern unsigned long get_clock_tick_rate(void);
#endif
#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO 0
-#define PCIBIOS_MIN_MEM 0
-#define pcibios_assign_all_busses() 1
#define ARCH_HAS_DMA_SET_COHERENT_MASK
#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 038402404e39..7cc5a781e99e 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -104,4 +104,16 @@
#define NR_IRQS (IRQ_BOARD_START)
+#ifndef __ASSEMBLY__
+struct irq_data;
+struct pt_regs;
+
+void pxa_mask_irq(struct irq_data *);
+void pxa_unmask_irq(struct irq_data *);
+void icip_handle_irq(struct pt_regs *);
+void ichp_handle_irq(struct pt_regs *);
+
+void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int));
+#endif
+
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
index 508c3ba1f4d0..3ac0baac7350 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -4,5 +4,14 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
+
+extern void __init pxa25x_map_io(void);
+extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
+
+#define pxa25x_handle_irq icip_handle_irq
#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 0b702693f458..b9b1bdc4bacc 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -4,6 +4,7 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
+#include <mach/irqs.h>
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
@@ -17,6 +18,10 @@
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+extern void __init pxa27x_map_io(void);
+extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
+#define pxa27x_handle_irq ichp_handle_irq
+
#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h
index 2f33076c9e48..733b6412c3df 100644
--- a/arch/arm/mach-pxa/include/mach/pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/pxa300.h
@@ -1,8 +1,7 @@
#ifndef __MACH_PXA300_H
#define __MACH_PXA300_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa300.h>
#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h
index cab78e903273..b6204e470d89 100644
--- a/arch/arm/mach-pxa/include/mach/pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/pxa320.h
@@ -1,8 +1,7 @@
#ifndef __MACH_PXA320_H
#define __MACH_PXA320_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa320.h>
#endif /* __MACH_PXA320_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h
new file mode 100644
index 000000000000..cd3e57f42688
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h
@@ -0,0 +1,14 @@
+#ifndef __MACH_PXA3XX_H
+#define __MACH_PXA3XX_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/irqs.h>
+
+extern void __init pxa3xx_map_io(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+
+#endif /* __MACH_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h
index d45f76a9b54d..190363b98d01 100644
--- a/arch/arm/mach-pxa/include/mach/pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/pxa930.h
@@ -1,8 +1,7 @@
#ifndef __MACH_PXA930_H
#define __MACH_PXA930_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa930.h>
#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
deleted file mode 100644
index 662288eb6f95..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __ASM_MACH_REGS_INTC_H
-#define __ASM_MACH_REGS_INTC_H
-
-#include <mach/hardware.h>
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
-#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
-#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
-#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
-#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
-
-#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 32ed551bf9c5..b09e848eb6c6 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -37,6 +37,8 @@
#define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \
((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \
(0x144 + (((i) - 64) << 2)))
+#define ICHP_VAL_IRQ (1 << 31)
+#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff)
#define IPR_VALID (1 << 31)
#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
@@ -64,7 +66,7 @@ static inline void __iomem *irq_base(int i)
return (void __iomem *)io_p2v(phys_base[i]);
}
-static void pxa_mask_irq(struct irq_data *d)
+void pxa_mask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
uint32_t icmr = __raw_readl(base + ICMR);
@@ -73,7 +75,7 @@ static void pxa_mask_irq(struct irq_data *d)
__raw_writel(icmr, base + ICMR);
}
-static void pxa_unmask_irq(struct irq_data *d)
+void pxa_unmask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
uint32_t icmr = __raw_readl(base + ICMR);
@@ -127,6 +129,36 @@ static struct irq_chip pxa_low_gpio_chip = {
.irq_set_type = pxa_set_low_gpio_type,
};
+asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
+{
+ uint32_t icip, icmr, mask;
+
+ do {
+ icip = __raw_readl(IRQ_BASE + ICIP);
+ icmr = __raw_readl(IRQ_BASE + ICMR);
+ mask = icip & icmr;
+
+ if (mask == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(fls(mask) - 1), regs);
+ } while (1);
+}
+
+asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
+{
+ uint32_t ichp;
+
+ do {
+ __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp));
+
+ if ((ichp & ICHP_VAL_IRQ) == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs);
+ } while (1);
+}
+
static void __init pxa_init_low_gpio_irq(set_wake_t fn)
{
int irq;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e5e326d2cdc9..8f97e15e86e5 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6cf8180bf5bd..c171d6ebee49 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -503,6 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e10ddb827147..a8c696bfc132 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -553,6 +553,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
.init_irq = lubbock_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 0e42798942f7..5fe5bcd7c0a1 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,6 +757,7 @@ MACHINE_START(MAGICIAN, "HTC Magician")
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 3479e2b3b511..4622eb78ef25 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -620,6 +620,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index aa67637ae41d..64810f908e5b 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -754,6 +754,7 @@ MACHINE_START(MIOA701, "MIO A701")
.boot_params = 0xa0000100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
+ .handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 59cce78aebd1..fb408861dbcf 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -96,6 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = mp900c_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 4061ecddee70..6b77365ed938 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -345,6 +345,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
.boot_params = 0xa0000100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmld_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index df4d7d009fbb..9bd3e47486fb 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -206,6 +206,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmt5_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index fb06bd047272..6ad4a6c7bc96 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -31,14 +31,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
-#include <mach/pxa2xx-regs.h>
#include "generic.h"
#include "devices.h"
@@ -541,6 +540,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 726f5b98dcd3..664232f3e62c 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -31,11 +31,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
@@ -359,6 +359,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 20d1b18b1733..bb27d4b688d8 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -444,6 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
@@ -453,6 +454,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 595f002066cc..fc4285589c1f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -367,6 +367,7 @@ MACHINE_START(PALMTX, "Palm T|X")
.boot_params = 0xa0000100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmtx_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 5a5329bc33f1..e61c1cc05519 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -402,6 +402,7 @@ MACHINE_START(PALMZ72, "Palm Zire72")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmz72_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 1fc8a66407ae..ffa65dfb8c6f 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 16d14fd79b4b..a113ea9ab4ab 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -468,6 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
.map_io = pxa25x_map_io,
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index ef1c56a67afc..b5cd9e5aba31 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -32,7 +32,6 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/regs-intc.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -338,13 +337,13 @@ static void pxa_ack_ext_wakeup(struct irq_data *d)
static void pxa_mask_ext_wakeup(struct irq_data *d)
{
- ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f));
+ pxa_mask_irq(d);
PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
}
static void pxa_unmask_ext_wakeup(struct irq_data *d)
{
- ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f);
+ pxa_unmask_irq(d);
PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index ecc82a330fad..0ee166b61f81 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -27,7 +27,6 @@
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/regs-intc.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 2f37d43f51b6..bbcd90562ebe 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -46,10 +46,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa3xx.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
@@ -1093,6 +1090,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
@@ -1103,6 +1101,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
@@ -1113,6 +1112,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fee97a935122..df4356e8acae 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -599,6 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index e53a3334c944..ebd6379c4969 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -107,6 +107,7 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saarb_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 01c576963e94..438c7b5e451f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -994,6 +995,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -1004,6 +1006,7 @@ MACHINE_START(AKITA, "SHARP Akita")
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index cb5611daf5fe..3f8d0af9e2f7 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1001,6 +1001,7 @@ static void __init stargate2_init(void)
MACHINE_START(INTELMOTE2, "IMOTE 2")
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
.boot_params = 0xA0000100,
@@ -1012,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2")
.map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
.boot_params = 0xA0000100,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 53d4a472b699..32fb58e01b10 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -492,6 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index 79f4422f12f4..fd5a8eae0a87 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -129,6 +129,7 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5fa145778e7d..9f69a2682693 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -974,6 +974,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
.map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 687417a93698..c0417508f39d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -567,5 +568,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 903218eab56d..d4a3dc74e84a 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -995,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
.boot_params = 0xa0000100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 67bd41488bf8..5f8490ab07cb 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,6 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index f55f8f2e0db3..acc600f5e72f 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -28,8 +28,7 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -185,6 +184,7 @@ MACHINE_START(XCEP, "Iskratel XCEP")
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fbe9e02e2f9f..6c9275a20c91 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -40,6 +40,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
+#include <mach/pm.h>
#include "generic.h"
#include "devices.h"
@@ -677,6 +678,20 @@ static void __init z2_pmic_init(void)
static inline void z2_pmic_init(void) {}
#endif
+#ifdef CONFIG_PM
+static void z2_power_off(void)
+{
+ /* We're using deep sleep as poweroff, so clear PSPR to ensure that
+ * bootloader will jump to its entry point in resume handler
+ */
+ PSPR = 0x0;
+ local_irq_disable();
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+}
+#else
+#define z2_power_off NULL
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
@@ -698,12 +713,15 @@ static void __init z2_init(void)
z2_leds_init();
z2_keys_init();
z2_pmic_init();
+
+ pm_power_off = z2_power_off;
}
MACHINE_START(ZIPIT2, "Zipit Z2")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 9b99cc164de5..99c49bcd9f70 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -35,14 +35,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
@@ -909,6 +908,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 5821185f77ab..15ec66b3471a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -24,7 +24,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
+#include <mach/pxa3xx.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/zylonite.h>
@@ -426,6 +426,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
MACHINE_END
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index a30f2e3ec178..6657ff231161 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd)
*/
if (realview_reset)
realview_reset(mode);
+ dsb();
}
#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 70a83b209e25..45eea5210c87 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void s3c_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 554e0d3ec70b..f9e6bdaf41d2 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -36,7 +36,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 6224bad4d604..9ad99f8016a1 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -38,7 +38,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index f8d96130d1d1..7f5ea0a169a5 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -35,7 +35,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index fdc89fc3b464..f057b6ae4f90 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -267,3 +267,26 @@ config MACH_SMARTQ7
select MACH_SMARTQ
help
Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+ bool "Wolfson Cragganmore 6410"
+ select CPU_S3C6410
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_KEYPAD
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_KEYPAD
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_WDT
+ select S3C_DEV_RTC
+ select S3C64XX_DEV_SPI
+ select S3C24XX_GPIO_EXTRA128
+ help
+ Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index f5a7144a052f..61b4034a0c22 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
# device support
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 8e2df26cf14a..c026f67a80de 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -198,7 +198,9 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_SMDK6410_WM1190_EV1
+#ifdef CONFIG_MACH_WLF_CRAGG_6410
+#define IRQ_BOARD_NR 128
+#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
#define IRQ_BOARD_NR 64
@@ -215,6 +217,7 @@
/* Compatibility */
#define IRQ_ONENAND IRQ_ONENAND0
+#define IRQ_I2S0 IRQ_S3C6410_IIS
#endif /* __ASM_MACH_S3C64XX_IRQS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 1e9f20f0bb7b..38659bebe4b1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -53,7 +53,7 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
* the IRQ wake controls depending on the CPU we are running on */
#define s3c_irqwake_eintallow ((1 << 28) - 1)
-#define s3c_irqwake_intallow (0)
+#define s3c_irqwake_intallow (~0)
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
@@ -96,3 +96,20 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
save->ucon = new_ucon;
}
}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+
+ __raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void s3c_pm_saved_gpios(void)
+{
+ /* turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+
+ __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
index 97660c8141ae..75d9a0e49193 100644
--- a/arch/arm/mach-s3c64xx/irq.c
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -48,14 +48,22 @@ static struct s3c_uart_irq uart_irqs[] = {
},
};
+/* setup the sources the vic should advertise resume for, even though it
+ * is not doing the wake (set_irq_wake needs to be valid) */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
new file mode 100644
index 000000000000..af0c2fe1ea37
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -0,0 +1,774 @@
+/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright 2011 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/basic_mmio_gpio.h>
+#include <linux/spi/spi.h>
+
+#include <linux/i2c/pca953x.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/s3c6410.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <mach/regs-gpio-memport.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <plat/keypad.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1000,
+ .dft_brightness = 600,
+ .pwm_period_ns = 100000, /* about 1kHz */
+};
+
+static struct platform_device crag6410_backlight_device = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &crag6410_backlight_data,
+ },
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+ pr_debug("%s: setting power %d\n", __func__, power);
+
+ if (power) {
+ gpio_set_value(S3C64XX_GPB(0), 1);
+ msleep(1);
+ s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+ } else {
+ gpio_direction_output(S3C64XX_GPF(14), 0);
+ gpio_set_value(S3C64XX_GPB(0), 0);
+ }
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &(struct plat_lcd_data) {
+ .set_power = crag6410_lcd_power_set,
+ },
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .left_margin = 150,
+ .right_margin = 80,
+ .upper_margin = 40,
+ .lower_margin = 5,
+ .hsync_len = 40,
+ .vsync_len = 5,
+ .xres = 640,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .virtual_y = 480 * 2,
+ .virtual_x = 640,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &crag6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_HOME),
+ KEY(0, 2, KEY_VOLUMEDOWN),
+ KEY(0, 3, KEY_HELP),
+ KEY(0, 4, KEY_MENU),
+ KEY(0, 5, KEY_MEDIA),
+ KEY(1, 0, 232),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_LEFT),
+ KEY(1, 3, KEY_UP),
+ KEY(1, 4, KEY_RIGHT),
+ KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+ .keymap = crag6410_keymap,
+ .keymap_size = ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+ .keymap_data = &crag6410_keymap_data,
+ .rows = 2,
+ .cols = 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+ [0] = {
+ .code = KEY_SUSPEND,
+ .gpio = S3C64XX_GPL(10), /* EINT 18 */
+ .type = EV_KEY,
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ [1] = {
+ .code = SW_FRONT_PROXIMITY,
+ .gpio = S3C64XX_GPN(11), /* EINT 11 */
+ .type = EV_SW,
+ },
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+ .buttons = crag6410_gpio_keys,
+ .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN5,
+ .end = S3C64XX_PA_XM0CSN5 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN5 + (1 << 8),
+ .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = S3C_EINT(17),
+ .end = S3C_EINT(17),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
+ .resource = crag6410_dm9k_resource,
+ .dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN4 + 1,
+ .end = S3C64XX_PA_XM0CSN4 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device crag6410_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = -1,
+ .resource = crag6410_mmgpio_resource,
+ .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
+ .dev.platform_data = &(struct bgpio_pdata) {
+ .base = -1,
+ },
+};
+
+static struct platform_device speyside_device = {
+ .name = "speyside",
+ .id = -1,
+};
+
+static struct platform_device speyside_wm8962_device = {
+ .name = "speyside-wm8962",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+ REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+ .consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+ .supply_name = "WALLVDD",
+ .microvolts = 5000000,
+ .init_data = &wallvdd_data,
+ .gpio = -EINVAL,
+};
+
+static struct platform_device wallvdd_device = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &wallvdd_pdata,
+ },
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_usb_hsotg,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c64xx_device_iis0,
+ &s3c64xx_device_iis1,
+ &samsung_asoc_dma,
+ &samsung_device_keypad,
+ &crag6410_gpio_keydev,
+ &crag6410_dm9k_device,
+ &s3c64xx_device_spi0,
+ &crag6410_mmgpio,
+ &crag6410_lcd_powerdev,
+ &crag6410_backlight_device,
+ &speyside_device,
+ &speyside_wm8962_device,
+ &wallvdd_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+ .gpio_base = PCA935X_GPIO_BASE,
+ .irq_base = 0,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm __initdata = {
+ .constraints = {
+ .name = "VDDARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+ .consumer_supplies = vddarm_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddint __initdata = {
+ .constraints = {
+ .name = "VDDINT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+static struct regulator_init_data vddmem __initdata = {
+ .constraints = {
+ .name = "VDDMEM",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddsys __initdata = {
+ .constraints = {
+ .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc __initdata = {
+ .constraints = {
+ .name = "VDDMMC,UH",
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+ .consumer_supplies = vddmmc_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotgi __initdata = {
+ .constraints = {
+ .name = "VDDOTGi",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotg __initdata = {
+ .constraints = {
+ .name = "VDDOTG",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddhi __initdata = {
+ .constraints = {
+ .name = "VDDHI",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddadc __initdata = {
+ .constraints = {
+ .name = "VDDADC,VDDDAC",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem0 __initdata = {
+ .constraints = {
+ .name = "VDDMEM0",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddpll __initdata = {
+ .constraints = {
+ .name = "VDDPLL",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddlcd __initdata = {
+ .constraints = {
+ .name = "VDDLCD",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddalive __initdata = {
+ .constraints = {
+ .name = "VDDALIVE",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+ .charger_enable = 1,
+ .vlim = 2500, /* mV */
+ .ilim = 200, /* uA */
+};
+
+static struct wm831x_status_pdata banff_red_led __initdata = {
+ .name = "banff:red:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led __initdata = {
+ .name = "banff:green:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata __initdata = {
+ .data_irq = S3C_EINT(26),
+ .pd_irq = S3C_EINT(27),
+};
+
+static struct wm831x_pdata crag_pmic_pdata __initdata = {
+ .wm831x_num = 1,
+ .irq_base = BANFF_PMIC_IRQ_BASE,
+ .gpio_base = GPIO_BOARD_START + 8,
+
+ .backup = &banff_backup_pdata,
+
+ .gpio_defaults = {
+ /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+ /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+ [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+ },
+
+ .dcdc = {
+ &vddarm, /* DCDC1 */
+ &vddint, /* DCDC2 */
+ &vddmem, /* DCDC3 */
+ },
+
+ .ldo = {
+ &vddsys, /* LDO1 */
+ &vddmmc, /* LDO2 */
+ NULL, /* LDO3 */
+ &vddotgi, /* LDO4 */
+ &vddotg, /* LDO5 */
+ &vddhi, /* LDO6 */
+ &vddadc, /* LDO7 */
+ &vddmem0, /* LDO8 */
+ &vddpll, /* LDO9 */
+ &vddlcd, /* LDO10 */
+ &vddalive, /* LDO11 */
+ },
+
+ .status = {
+ &banff_green_led,
+ &banff_red_led,
+ },
+
+ .touch = &touch_pdata,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("tca6408", 0x20),
+ .platform_data = &crag6410_pca_data,
+ },
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &crag_pmic_pdata,
+ .irq = S3C_EINT(23),
+ },
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+ .frequency = 400000,
+};
+
+static struct regulator_init_data pvdd_1v2 __initdata = {
+ .constraints = {
+ .name = "PVDD_1V2",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("CPVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DCVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_1v8 __initdata = {
+ .constraints = {
+ .name = "PVDD_1V8",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_1v8_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+ REGULATOR_SUPPLY("MICVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 __initdata = {
+ .constraints = {
+ .name = "PVDD_3V3",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_3v3_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+ .wm831x_num = 2,
+ .irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+ .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+
+ .gpio_defaults = {
+ /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+ [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ },
+
+ .dcdc = {
+ &pvdd_1v2, /* DCDC1 */
+ &pvdd_1v8, /* DCDC2 */
+ &pvdd_3v3, /* DCDC3 */
+ },
+
+ .disable_touch = true,
+};
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8996_DIFFERRENTIAL_1,
+ .inr_mode = WM8996_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8996_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8311", 0x34),
+ .irq = S3C_EINT(0),
+ .platform_data = &glenfarclas_pmic_pdata },
+
+ { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
+ { I2C_BOARD_INFO("wm8996", 0x1a),
+ .platform_data = &wm8996_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+static void __init crag6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+
+ /* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C64XX_GPF(11),
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+ /* force card-detected for prototype 0 */
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .cfg_gpio = crag6410_cfg_sdhci0,
+};
+
+static void __init crag6410_machine_init(void)
+{
+ /* Open drain IRQs need pullups */
+ s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+ gpio_request(S3C64XX_GPB(0), "LCD power");
+ gpio_direction_output(S3C64XX_GPB(0), 0);
+
+ gpio_request(S3C64XX_GPF(14), "LCD PWM");
+ gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
+
+ gpio_request(S3C64XX_GPB(1), "SD power");
+ gpio_direction_output(S3C64XX_GPB(1), 0);
+
+ gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+ gpio_direction_output(S3C64XX_GPF(10), 1);
+
+ s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+ s3c_i2c0_set_platdata(&i2c0_pdata);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&crag6410_lcd_pdata);
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+ platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+ regulator_has_full_constraints();
+
+ s3c_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+ /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = crag6410_map_io,
+ .init_machine = crag6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 8bad64370689..055e2858b0dd 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -16,6 +16,7 @@
#include <linux/suspend.h>
#include <linux/serial_core.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index ae6bf6feba89..5f6afdf067ed 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -13,7 +13,7 @@ obj- :=
# Core support for S5P64X0 system
obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
-obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o
+obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 513abffc7604..5837a36ece8d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -85,6 +85,8 @@
#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4
#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5
+#define IRQ_I2S0 IRQ_I2SV40
+
/* S5P6450 EINT feature will be added */
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 0953ef6b1c77..6ce254729f3b 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,4 +34,14 @@
#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+/* External interrupt control registers for group0 */
+
+#define EINT0CON0_OFFSET (0x900)
+#define EINT0MASK_OFFSET (0x920)
+#define EINT0PEND_OFFSET (0x924)
+
+#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
+#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
new file mode 100644
index 000000000000..fe7380f5c3cd
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -0,0 +1,152 @@
+/* arch/arm/mach-s5p64x0/irq-eint.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * http://www.samsung.com/
+ *
+ * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
+ *
+ * S5P64X0 - Interrupt handling for External Interrupts.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/regs-irqtype.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ if (offs > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+ /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+ if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5P64X0_EINT0PEND);
+ u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+ status >>= 1;
+ }
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+ struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+ S5P_VA_GPIO, handle_level_irq);
+ if (!gc) {
+ printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+ "external interrupts failed\n", __func__);
+ return -EINVAL;
+ }
+
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->regs.ack = EINT0PEND_OFFSET;
+ ct->regs.mask = EINT0MASK_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+ int ret = s5p64x0_alloc_gc();
+ irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+ return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 79bb3a0314ef..69dd87cd8e22 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -90,6 +90,7 @@ config MACH_GONI
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
+ select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index ae72f87eab15..52a8e607bcc2 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -324,6 +324,12 @@ static struct clk init_clocks_off[] = {
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 26),
}, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .parent = &clk_pclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
.name = "otg",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
@@ -879,6 +885,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_mfc",
+ .devname = "s5p-mfc",
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 16),
},
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 61e6c24b90ac..79907ec78d43 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -126,7 +126,7 @@ void __init s5pv210_map_io(void)
s5pv210_default_sdhci2();
s5pv210_default_sdhci3();
- s3c_adc_setname("s3c64xx-adc");
+ s3c_adc_setname("samsung-adc-v3");
s3c_cfcon_setname("s5pv210-pata");
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 8d58f1926241..63f5d82004b5 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -18,6 +18,7 @@
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
+#include <mach/regs-audss.h>
static const char *rclksrc[] = {
[0] = "busclk",
@@ -52,6 +53,7 @@ static struct s3c_audio_pdata i2sv5_pdata = {
.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
| QUIRK_NEED_RSTCLR,
.src_clk = rclksrc,
+ .idma_addr = S5PV210_AUDSS_INT_MEM,
},
},
};
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 1dd58836fd4f..aac343c180b2 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -59,6 +59,8 @@
#define S5PV210_PA_CFCON 0xE8200000
+#define S5PV210_PA_MFC 0xF1700000
+
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_HSOTG 0xEC000000
@@ -107,6 +109,7 @@
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S5P_PA_MFC S5PV210_PA_MFC
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index e8d394f8b057..3e22109e1b7b 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
{
/* nothing here yet */
}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void s3c_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h
new file mode 100644
index 000000000000..eacc1f790807
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-audss.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com
+ *
+ * S5PV210 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define S5PV210_AUDSS_INT_MEM (0xC0000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e0c4d06b9db6..85c2d51a0956 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -46,6 +46,7 @@
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/s5p-time.h>
+#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -808,6 +809,9 @@ static struct platform_device *goni_devices[] __initdata = {
&goni_i2c_gpio5,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -841,6 +845,11 @@ static void __init goni_map_io(void)
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void __init goni_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init goni_machine_init(void)
{
/* Radio: call before I2C 1 registeration */
@@ -893,4 +902,5 @@ MACHINE_START(GONI, "GONI")
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s5p_timer,
+ .reserve = &goni_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index ef20f922249d..5e011fc6720d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -229,6 +229,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_spdif,
&samsung_asoc_dma,
+ &samsung_asoc_idma,
&samsung_device_keypad,
&smdkv210_dm9000,
&smdkv210_lcd_lte480wv,
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 309e388a8a83..f149d278377b 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = {
SAVE_ITEM(S3C2410_TCNTO(0)),
};
-void s5pv210_cpu_suspend(unsigned long arg)
+static int s5pv210_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 967ae7684390..99f5856d8de4 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -76,12 +76,4 @@ static inline unsigned long get_clock_tick_rate(void)
#include "SA-1101.h"
#endif
-#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO 0
-#define PCIBIOS_MIN_MEM 0
-#define pcibios_assign_all_busses() 1
-#define HAVE_ARCH_PCI_SET_DMA_MASK 1
-#endif
-
-
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index fba7a913f12b..dd39fee59549 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -28,6 +28,7 @@
#include <asm/mach-types.h>
#include <mach/nanoengine.h>
+#include <mach/hardware.h>
static DEFINE_SPINLOCK(nano_lock);
@@ -122,7 +123,8 @@ static struct pci_ops pci_nano_ops = {
.write = nanoengine_write_config,
};
-static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
{
return NANOENGINE_IRQ_GPIO_PCI;
}
@@ -252,6 +254,9 @@ int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
if (nr == 0) {
sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
sys->io_offset = 0x400;
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index 94d84b27a0cb..663f952a8ab3 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -12,11 +12,5 @@
#define UNCACHEABLE_ADDR 0xdf010000
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x6000
-#define PCIBIOS_MIN_MEM 0x50000000
-#define PCIMEM_BASE 0xe8000000
-
#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index 89d175ce74d2..7cb79a092f31 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -8,12 +8,13 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
-static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->number == 0)
if (dev->devfn == 0)
@@ -37,8 +38,15 @@ static struct hw_pci shark_pci __initdata = {
static int __init shark_pci_init(void)
{
- if (machine_is_shark())
- pci_common_init(&shark_pci);
+ if (!machine_is_shark())
+ return;
+
+ pcibios_min_io = 0x6000;
+ pcibios_min_mem = 0x50000000;
+ vga_base = 0xe8000000;
+
+ pci_common_init(&shark_pci);
+
return 0;
}
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index ce5c2513c6ce..cdfdd624d21d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = {
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
};
@@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 837138e369bc..523f608eb8cf 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -957,19 +957,16 @@ static struct resource csi2_resources[] = {
},
};
-static struct platform_device csi2_device = {
- .name = "sh-mobile-csi2",
- .id = 0,
+static struct sh_mobile_ceu_companion csi2 = {
+ .id = 0,
.num_resources = ARRAY_SIZE(csi2_resources),
.resource = csi2_resources,
- .dev = {
- .platform_data = &csi2_info,
- },
+ .platform_data = &csi2_info,
};
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
- .csi2_dev = &csi2_device.dev,
+ .csi2 = &csi2,
};
static struct resource ceu_resources[] = {
@@ -1013,7 +1010,6 @@ static struct platform_device *ap4evb_devices[] __initdata = {
&lcdc1_device,
&lcdc_device,
&hdmi_device,
- &csi2_device,
&ceu_device,
&ap4evb_camera,
&meram_device,
@@ -1416,6 +1412,7 @@ static void __init ap4evb_init(void)
fsi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
+ pm_clk_add(&lcdc1_device.dev, "hdmi");
}
static void __init ap4evb_timer_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 5b36b6c5b448..17c19dc25604 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = {
},
.driver_param = {
.buswait_bwait = 4,
+ .d0_tx_id = SHDMA_SLAVE_USB0_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB0_RX,
},
},
};
@@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = {
.buswait_bwait = 4,
.pipe_type = usbhs1_pipe_cfg,
.pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
+ .d0_tx_id = SHDMA_SLAVE_USB1_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB1_RX,
},
},
};
@@ -1192,8 +1196,8 @@ static struct platform_device sh_mmcif_device = {
};
-static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev);
-static void mackerel_camera_del(struct soc_camera_link *icl);
+static int mackerel_camera_add(struct soc_camera_device *icd);
+static void mackerel_camera_del(struct soc_camera_device *icd);
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
@@ -1232,16 +1236,15 @@ static void mackerel_camera_release(struct device *dev)
soc_camera_platform_release(&camera_device);
}
-static int mackerel_camera_add(struct soc_camera_link *icl,
- struct device *dev)
+static int mackerel_camera_add(struct soc_camera_device *icd)
{
- return soc_camera_platform_add(icl, dev, &camera_device, &camera_link,
+ return soc_camera_platform_add(icd, &camera_device, &camera_link,
mackerel_camera_release, 0);
}
-static void mackerel_camera_del(struct soc_camera_link *icl)
+static void mackerel_camera_del(struct soc_camera_device *icd)
{
- soc_camera_platform_del(icl, camera_device, &camera_link);
+ soc_camera_platform_del(icd, camera_device, &camera_link);
}
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
@@ -1589,6 +1592,7 @@ static void __init mackerel_init(void)
hdmi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
+ pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
}
static void __init mackerel_timer_init(void)
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 6b186aefcbd6..5218c34a9cc6 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -259,9 +259,6 @@ static struct clk mstp_clks[MSTP_NR] = {
[CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
};
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("r_clk", &r_clk),
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 91f5779abdd3..66975921e646 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = {
&sh7372_fsidivb_clk,
};
-enum { MSTP001,
+enum { MSTP001, MSTP000,
MSTP131, MSTP130,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
MSTP118, MSTP117, MSTP116, MSTP113,
MSTP106, MSTP101, MSTP100,
MSTP223,
- MSTP218, MSTP217, MSTP216,
- MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
- MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+ MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
+ MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+ MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+ MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
+ MSTP405, MSTP404, MSTP403, MSTP400,
MSTP_NR };
#define MSTP(_parent, _reg, _bit, _flags) \
@@ -520,6 +521,7 @@ enum { MSTP001,
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */
[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
@@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
[MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
+ [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
+ [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
- [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
@@ -557,14 +561,14 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+ [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */
[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+ [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */
+ [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+ [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */
};
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
@@ -613,6 +617,7 @@ static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+ CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
@@ -633,14 +638,16 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */
+ CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */
+ CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
@@ -654,11 +661,17 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+ CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
+ CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */
+ CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+ CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
+ CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
+ &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index 95942466e63f..8cee7b151ae3 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -267,9 +267,6 @@ static struct clk mstp_clks[] = {
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
};
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("r_clk", &r_clk),
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index bcacb1e8cf85..61a846bb30f2 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -306,10 +306,6 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
};
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("r_clk", &r_clk),
@@ -369,7 +365,7 @@ void __init sh73a0_clock_init(void)
__raw_writel(0x108, SD2CKCR);
/* detect main clock parent */
- switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
+ switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
case 0:
main_clk.parent = &sh73a0_extal1_clk;
break;
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index ce595cee86cd..24e63a85e669 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -459,6 +459,10 @@ enum {
SHDMA_SLAVE_SDHI2_TX,
SHDMA_SLAVE_MMCIF_RX,
SHDMA_SLAVE_MMCIF_TX,
+ SHDMA_SLAVE_USB0_TX,
+ SHDMA_SLAVE_USB0_RX,
+ SHDMA_SLAVE_USB1_TX,
+ SHDMA_SLAVE_USB1_RX,
};
extern struct clk sh7372_extal1_clk;
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 3b28743c77eb..739315e30eb9 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -379,7 +379,7 @@ enum {
/* BBIF2 */
VPU,
TSIF1,
- _3DG_SGX530,
+ /* 3DG */
_2DDMAC,
IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
IPMMU_IPMMUR, IPMMU_IPMMUR2,
@@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = {
/* BBIF2 */
INTCS_VECT(VPU, 0x980),
INTCS_VECT(TSIF1, 0x9a0),
- INTCS_VECT(_3DG_SGX530, 0x9e0),
+ /* 3DG */
INTCS_VECT(_2DDMAC, 0xa00),
INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
@@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = {
RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
{ 0, 0, MSIOF, 0,
- _3DG_SGX530, 0, 0, 0 } },
+ 0, 0, 0, 0 } },
{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
{ 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
0, 0, 0, 0 } },
@@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = {
TMU_TUNI2, TSIF1 } },
{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
- { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 79f0413d8725..2d9b1b1a2538 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -169,35 +169,35 @@ static struct platform_device scif6_device = {
};
/* CMT */
-static struct sh_timer_config cmt10_platform_data = {
- .name = "CMT10",
- .channel_offset = 0x10,
- .timer_bit = 0,
+static struct sh_timer_config cmt2_platform_data = {
+ .name = "CMT2",
+ .channel_offset = 0x40,
+ .timer_bit = 5,
.clockevent_rating = 125,
.clocksource_rating = 125,
};
-static struct resource cmt10_resources[] = {
+static struct resource cmt2_resources[] = {
[0] = {
- .name = "CMT10",
- .start = 0xe6138010,
- .end = 0xe613801b,
+ .name = "CMT2",
+ .start = 0xe6130040,
+ .end = 0xe613004b,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evt2irq(0x0b00), /* CMT1_CMT10 */
+ .start = evt2irq(0x0b80), /* CMT2 */
.flags = IORESOURCE_IRQ,
},
};
-static struct platform_device cmt10_device = {
+static struct platform_device cmt2_device = {
.name = "sh_cmt",
- .id = 10,
+ .id = 2,
.dev = {
- .platform_data = &cmt10_platform_data,
+ .platform_data = &cmt2_platform_data,
},
- .resource = cmt10_resources,
- .num_resources = ARRAY_SIZE(cmt10_resources),
+ .resource = cmt2_resources,
+ .num_resources = ARRAY_SIZE(cmt2_resources),
};
/* TMU */
@@ -602,6 +602,150 @@ static struct platform_device dma2_device = {
},
};
+/*
+ * USB-DMAC
+ */
+
+unsigned int usbts_shift[] = {3, 4, 5};
+
+enum {
+ XMIT_SZ_8BYTE = 0,
+ XMIT_SZ_16BYTE = 1,
+ XMIT_SZ_32BYTE = 2,
+};
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
+ {
+ .offset = 0,
+ }, {
+ .offset = 0x20,
+ },
+};
+
+/* USB DMAC0 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USB0_TX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0_RX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma0_platform_data = {
+ .slave = sh7372_usb_dmae0_slaves,
+ .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves),
+ .channel = sh7372_usb_dmae_channels,
+ .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
+ .ts_low_shift = 6,
+ .ts_low_mask = 0xc0,
+ .ts_high_shift = 0,
+ .ts_high_mask = 0,
+ .ts_shift = usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+};
+
+static struct resource sh7372_usb_dmae0_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68a0020,
+ .end = 0xe68a0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68a0000,
+ .end = 0xe68a0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x0a00),
+ .end = evt2irq(0x0a00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma0_device = {
+ .name = "sh-dma-engine",
+ .id = 3,
+ .resource = sh7372_usb_dmae0_resources,
+ .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources),
+ .dev = {
+ .platform_data = &usb_dma0_platform_data,
+ },
+};
+
+/* USB DMAC1 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USB1_TX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1_RX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma1_platform_data = {
+ .slave = sh7372_usb_dmae1_slaves,
+ .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves),
+ .channel = sh7372_usb_dmae_channels,
+ .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
+ .ts_low_shift = 6,
+ .ts_low_mask = 0xc0,
+ .ts_high_shift = 0,
+ .ts_high_mask = 0,
+ .ts_shift = usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+};
+
+static struct resource sh7372_usb_dmae1_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68c0020,
+ .end = 0xe68c0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68c0000,
+ .end = 0xe68c0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x1d00),
+ .end = evt2irq(0x1d00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma1_device = {
+ .name = "sh-dma-engine",
+ .id = 4,
+ .resource = sh7372_usb_dmae1_resources,
+ .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources),
+ .dev = {
+ .platform_data = &usb_dma1_platform_data,
+ },
+};
+
/* VPU */
static struct uio_info vpu_platform_data = {
.name = "VPU5HG",
@@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
&scif4_device,
&scif5_device,
&scif6_device,
- &cmt10_device,
+ &cmt2_device,
&tmu00_device,
&tmu01_device,
};
@@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
&dma0_device,
&dma1_device,
&dma2_device,
+ &usb_dma0_device,
+ &usb_dma1_device,
&vpu_device,
&veu0_device,
&veu1_device,
diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h
deleted file mode 100644
index a3d07339d9f1..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/clkdev.h
- *
- * Clock Dev framework definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-#include <plat/clkdev.h>
-
-#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h
deleted file mode 100644
index 05676bf440d3..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/clkdev.h
- *
- * Clock Dev framework definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-#include <plat/clkdev.h>
-
-#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5ec1846aa1d0..d82ebab50e11 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -27,14 +27,14 @@ comment "Tegra board type"
config MACH_HARMONY
bool "Harmony board"
- select MACH_HAS_SND_SOC_TEGRA_WM8903
+ select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for nVidia Harmony development platform
config MACH_KAEN
bool "Kaen board"
select MACH_SEABOARD
- select MACH_HAS_SND_SOC_TEGRA_WM8903
+ select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for the Kaen version of Seaboard
@@ -45,12 +45,18 @@ config MACH_PAZ00
config MACH_SEABOARD
bool "Seaboard board"
- select MACH_HAS_SND_SOC_TEGRA_WM8903
+ select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for nVidia Seaboard development platform. It will
also be included for some of the derivative boards that
have large similarities with the seaboard design.
+config MACH_TEGRA_DT
+ bool "Generic Tegra board (FDT support)"
+ select USE_OF
+ help
+ Support for generic nVidia Tegra boards using Flattened Device Tree
+
config MACH_TRIMSLICE
bool "TrimSlice board"
select TEGRA_PCI
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index ed58ef9019b5..f11b9100114a 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -29,5 +29,8 @@ obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
+obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
+obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
+
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index db52d61a7386..428ad122be03 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -1,3 +1,6 @@
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
+
+dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
+dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
new file mode 100644
index 000000000000..9f47e04446f3
--- /dev/null
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -0,0 +1,119 @@
+/*
+ * nVidia Tegra device tree board support
+ *
+ * Copyright (C) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pda_power.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-tegra.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/setup.h>
+
+#include <mach/iomap.h>
+#include <mach/irqs.h>
+
+#include "board.h"
+#include "board-harmony.h"
+#include "clock.h"
+#include "devices.h"
+
+void harmony_pinmux_init(void);
+void seaboard_pinmux_init(void);
+
+
+struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
+ {}
+};
+
+static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
+ /* name parent rate enabled */
+ { "uartd", "pll_p", 216000000, true },
+ { NULL, NULL, 0, 0},
+};
+
+static struct of_device_id tegra_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ {}
+};
+
+static struct of_device_id tegra_dt_gic_match[] __initdata = {
+ { .compatible = "nvidia,tegra20-gic", },
+ {}
+};
+
+static void __init tegra_dt_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
+ TEGRA_ARM_INT_DIST_BASE);
+ if (node)
+ irq_domain_add_simple(node, INT_GIC_BASE);
+
+ tegra_clk_init_from_table(tegra_dt_clk_init_table);
+
+ if (of_machine_is_compatible("nvidia,harmony"))
+ harmony_pinmux_init();
+ else if (of_machine_is_compatible("nvidia,seaboard"))
+ seaboard_pinmux_init();
+
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
+}
+
+static const char * tegra_dt_board_compat[] = {
+ "nvidia,harmony",
+ "nvidia,seaboard",
+ NULL
+};
+
+DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
+ .map_io = tegra_map_common_io,
+ .init_early = tegra_init_early,
+ .init_irq = tegra_init_irq,
+ .timer = &tegra_timer,
+ .init_machine = tegra_dt_init,
+ .dt_compat = tegra_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 30e18bc60647..846cd7d69e3e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -25,7 +25,6 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
#include <sound/wm8903.h>
@@ -83,22 +82,6 @@ static struct platform_device harmony_audio_device = {
},
};
-static struct tegra_i2c_platform_data harmony_i2c1_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c2_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c3_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_dvc_platform_data = {
- .bus_clk_rate = 400000,
-};
-
static struct wm8903_platform_data harmony_wm8903_pdata = {
.irq_active_low = 0,
.micdet_cfg = 0,
@@ -121,11 +104,6 @@ static struct i2c_board_info __initdata wm8903_board_info = {
static void __init harmony_i2c_init(void)
{
- tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data;
- tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data;
- tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data;
- tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data;
-
platform_device_register(&tegra_i2c_device1);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device3);
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index 2643d1bd568b..bdd2627dd87b 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -141,12 +141,10 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
};
static struct tegra_gpio_table gpio_table[] = {
- { .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
+ { .gpio = TEGRA_ULPI_RST, .enable = true },
};
void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 57e50a823eec..ea2f79c9879b 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -25,6 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -34,6 +35,7 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
@@ -66,10 +68,22 @@ static struct platform_device debug_uart = {
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
- &tegra_sdhci_device2,
&tegra_sdhci_device4,
};
+static void paz00_i2c_init(void)
+{
+ platform_device_register(&tegra_i2c_device1);
+ platform_device_register(&tegra_i2c_device2);
+ platform_device_register(&tegra_i2c_device4);
+}
+
+static void paz00_usb_init(void)
+{
+ platform_device_register(&tegra_ehci2_device);
+ platform_device_register(&tegra_ehci3_device);
+}
+
static void __init tegra_paz00_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
@@ -84,23 +98,16 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
{ NULL, NULL, 0, 0},
};
-
static struct tegra_sdhci_platform_data sdhci_pdata1 = {
.cd_gpio = TEGRA_GPIO_SD1_CD,
.wp_gpio = TEGRA_GPIO_SD1_WP,
.power_gpio = TEGRA_GPIO_SD1_POWER,
};
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
+static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.cd_gpio = -1,
.wp_gpio = -1,
.power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TEGRA_GPIO_SD4_CD,
- .wp_gpio = TEGRA_GPIO_SD4_WP,
- .power_gpio = TEGRA_GPIO_SD4_POWER,
.is_8bit = 1,
};
@@ -111,13 +118,15 @@ static void __init tegra_paz00_init(void)
paz00_pinmux_init();
tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+
+ paz00_i2c_init();
+ paz00_usb_init();
}
-MACHINE_START(PAZ00, "paz00")
+MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
.boot_params = 0x00000100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index da193ca76d3b..d4ff39ddaeb3 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,12 +17,10 @@
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
-#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6
+#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
+#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
void paz00_pinmux_init(void);
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 10fbbdc8699a..56cbabf6aa68 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
@@ -66,22 +65,6 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
{ NULL, NULL, 0, 0},
};
-static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = {
- .bus_clk_rate = 400000.
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_dvc_platform_data = {
- .bus_clk_rate = 400000,
-};
-
static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
{
.code = SW_LID,
@@ -137,9 +120,9 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
- &tegra_sdhci_device1,
- &tegra_sdhci_device3,
&tegra_sdhci_device4,
+ &tegra_sdhci_device3,
+ &tegra_sdhci_device1,
&seaboard_gpio_keys_device,
};
@@ -161,11 +144,6 @@ static void __init seaboard_i2c_init(void)
i2c_register_board_info(3, &adt7461_device, 1);
- tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
- tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;
- tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data;
- tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data;
-
platform_device_register(&tegra_i2c_device1);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device3);
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index d9dc5d297edd..47c596cdbf32 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -29,7 +29,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -126,7 +126,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
@@ -145,6 +145,9 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
+
+ { .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
+ { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */
};
void __init trimslice_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index cda4cfd78e84..89a6d2adc1de 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -23,6 +23,8 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -30,6 +32,7 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
+#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
@@ -71,12 +74,58 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.power_gpio = -1,
};
+static struct platform_device trimslice_audio_device = {
+ .name = "tegra-snd-trimslice",
+ .id = 0,
+};
+
static struct platform_device *trimslice_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &trimslice_audio_device,
};
+static struct i2c_board_info trimslice_i2c3_board_info[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("em3027", 0x56),
+ },
+};
+
+static void trimslice_i2c_init(void)
+{
+ platform_device_register(&tegra_i2c_device1);
+ platform_device_register(&tegra_i2c_device2);
+ platform_device_register(&tegra_i2c_device3);
+
+ i2c_register_board_info(2, trimslice_i2c3_board_info,
+ ARRAY_SIZE(trimslice_i2c3_board_info));
+}
+
+static void trimslice_usb_init(void)
+{
+ int err;
+
+ platform_device_register(&tegra_ehci3_device);
+
+ platform_device_register(&tegra_ehci2_device);
+
+ err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
+ "usb1mode");
+ if (err) {
+ pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
+ return;
+ }
+
+ platform_device_register(&tegra_ehci1_device);
+}
+
static void __init tegra_trimslice_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
@@ -90,6 +139,10 @@ static void __init tegra_trimslice_fixup(struct machine_desc *desc,
static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
{ NULL, NULL, 0, 0},
};
@@ -112,6 +165,9 @@ static void __init tegra_trimslice_init(void)
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
+
+ trimslice_i2c_init();
+ trimslice_usb_init();
}
MACHINE_START(TRIMSLICE, "trimslice")
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index e8ef6291c6f1..7a7dee86b4da 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -20,6 +20,9 @@
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
+#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */
+#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */
+
void trimslice_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 1528f9daef1f..57e35d20c24c 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -22,10 +22,14 @@
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/serial_8250.h>
+#include <linux/i2c-tegra.h>
+#include <linux/platform_data/tegra_usb.h>
#include <asm/pmu.h>
#include <mach/irqs.h>
#include <mach/iomap.h>
#include <mach/dma.h>
+#include <mach/usb_phy.h>
+#include "gpio-names.h"
static struct resource i2c_resource1[] = {
[0] = {
@@ -79,13 +83,29 @@ static struct resource i2c_resource4[] = {
},
};
+static struct tegra_i2c_platform_data tegra_i2c1_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c2_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c3_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_dvc_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
struct platform_device tegra_i2c_device1 = {
.name = "tegra-i2c",
.id = 0,
.resource = i2c_resource1,
.num_resources = ARRAY_SIZE(i2c_resource1),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c1_platform_data,
},
};
@@ -95,7 +115,7 @@ struct platform_device tegra_i2c_device2 = {
.resource = i2c_resource2,
.num_resources = ARRAY_SIZE(i2c_resource2),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c2_platform_data,
},
};
@@ -105,7 +125,7 @@ struct platform_device tegra_i2c_device3 = {
.resource = i2c_resource3,
.num_resources = ARRAY_SIZE(i2c_resource3),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c3_platform_data,
},
};
@@ -115,7 +135,7 @@ struct platform_device tegra_i2c_device4 = {
.resource = i2c_resource4,
.num_resources = ARRAY_SIZE(i2c_resource4),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_dvc_platform_data,
},
};
@@ -334,6 +354,28 @@ static struct resource tegra_usb3_resources[] = {
},
};
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+ /* All existing boards use GPIO PV0 for phy reset */
+ .reset_gpio = TEGRA_GPIO_PV0,
+ .clk = "cdev2",
+};
+
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+ .operating_mode = TEGRA_USB_OTG,
+ .power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+ .phy_config = &tegra_ehci2_ulpi_phy_config,
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+};
+
static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
struct platform_device tegra_ehci1_device = {
@@ -342,6 +384,7 @@ struct platform_device tegra_ehci1_device = {
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci1_pdata,
},
.resource = tegra_usb1_resources,
.num_resources = ARRAY_SIZE(tegra_usb1_resources),
@@ -353,6 +396,7 @@ struct platform_device tegra_ehci2_device = {
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci2_pdata,
},
.resource = tegra_usb2_resources,
.num_resources = ARRAY_SIZE(tegra_usb2_resources),
@@ -364,6 +408,7 @@ struct platform_device tegra_ehci3_device = {
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci3_pdata,
},
.resource = tegra_usb3_resources,
.num_resources = ARRAY_SIZE(tegra_usb3_resources),
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
deleted file mode 100644
index 425b42e91ef6..000000000000
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/barriers.h
- *
- * Copyright (C) 2010 ARM Ltd.
- * Written by Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_BARRIERS_H
-#define __MACH_BARRIERS_H
-
-#include <asm/outercache.h>
-
-#define rmb() dsb()
-#define wmb() do { dsb(); outer_sync(); } while (0)
-#define mb() wmb()
-
-#endif /* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
index d0183d876c3b..027c4215d313 100644
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -21,7 +21,6 @@
#ifndef __MACH_TEGRA_SYSTEM_H
#define __MACH_TEGRA_SYSTEM_H
-#include <mach/hardware.h>
#include <mach/iomap.h>
extern void (*arch_reset)(char mode, const char *cmd);
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 31848a9592f8..ea50fe28cf6a 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -24,7 +24,6 @@
#include <linux/mm.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index 2941212b853c..f1f699d86c32 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -449,7 +449,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-static int tegra_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return INT_PCIE_INTR;
}
@@ -912,6 +912,8 @@ int __init tegra_pcie_init(bool init_port0, bool init_port1)
if (!(init_port0 || init_port1))
return -ENODEV;
+ pcibios_min_mem = 0;
+
err = tegra_pcie_get_resources();
if (err)
return err;
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1a594dce8fbc..0886cbccddee 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -21,7 +21,6 @@
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
@@ -122,7 +121,7 @@ void __init smp_init_cpus(void)
}
for (i = 0; i < ncores; i++)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index bb618075fab6..0fe9b3ee2947 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -2182,8 +2182,8 @@ struct clk tegra_list_clks[] = {
PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */
+ PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
+ PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 5767208f1c1d..7b597e2b19e2 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = {
.hierarchy = SSP_MASTER,
/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
.slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
.ctrl_len = SSP_BITS_12,
.wait_state = SSP_MWIRE_WAIT_ZERO,
.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 18d7fa0603c2..5f51bdeef0ef 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -27,9 +27,6 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define APPTIMER_MIN_RANGE 4
-
/*
* APP side special timer registers
* This timer contains four timers which can fire an interrupt each.
@@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles,
/* Use general purpose timer 1 as clock event */
static struct clock_event_device clockevent_u300_1mhz = {
- .name = "GPT1",
- .rating = 300, /* Reasonably fast and accurate clock event */
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
+ .name = "GPT1",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
};
/* Clock event timer interrupt handler */
@@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
}
static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
+ .name = "U300 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = u300_timer_interrupt,
};
/*
@@ -413,16 +410,10 @@ static void __init u300_timer_init(void)
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
pr_err("timer: failed to initialize U300 clock source\n");
- clockevents_calc_mult_shift(&clockevent_u300_1mhz,
- rate, APPTIMER_MIN_RANGE);
- /* 32bit counter, so 32bits delta is max */
- clockevent_u300_1mhz.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
- /* This timer is slow enough to set for 1 cycle == 1 MHz */
- clockevent_u300_1mhz.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_u300_1mhz);
- clockevent_u300_1mhz.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_u300_1mhz);
+ /* Configure and register the clockevent */
+ clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+ 1, 0xffffffff);
+
/*
* TODO: init and register the rest of the timers too, they can be
* used by hrtimers!
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index f8b9392ee347..4210cb434dbc 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -20,7 +20,7 @@ config UX500_SOC_DB8500
endmenu
-menu "Ux500 target platform"
+menu "Ux500 target platform (boards)"
config MACH_U8500
bool "U8500 Development platform"
@@ -29,6 +29,19 @@ config MACH_U8500
help
Include support for the mop500 development platform.
+config MACH_HREFV60
+ bool "U85000 Development platform, HREFv60 version"
+ depends on UX500_SOC_DB8500
+ help
+ Include support for the HREFv60 new development platform.
+
+config MACH_SNOWBALL
+ bool "U8500 Snowball platform"
+ depends on UX500_SOC_DB8500
+ select MACH_U8500
+ help
+ Include support for the snowball development platform.
+
config MACH_U5500
bool "U5500 Development platform"
depends on UX500_SOC_DB5500
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 70cdbd60596a..f26fd76f72b4 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -236,6 +236,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = {
};
+static pin_cfg_t snowball_pins[] = {
+ /* SSP0, to AB8500 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+ /* MMC0: MicroSD card */
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+
+ /* MMC2: LAN */
+ GPIO86_SM_ADQ0,
+ GPIO87_SM_ADQ1,
+ GPIO88_SM_ADQ2,
+ GPIO89_SM_ADQ3,
+ GPIO90_SM_ADQ4,
+ GPIO91_SM_ADQ5,
+ GPIO92_SM_ADQ6,
+ GPIO93_SM_ADQ7,
+
+ GPIO94_SM_ADVn,
+ GPIO95_SM_CS0n,
+ GPIO96_SM_OEn,
+ GPIO97_SM_WEn,
+
+ GPIO128_SM_CKO,
+ GPIO130_SM_FBCLK,
+ GPIO131_SM_ADQ8,
+ GPIO132_SM_ADQ9,
+ GPIO133_SM_ADQ10,
+ GPIO134_SM_ADQ11,
+ GPIO135_SM_ADQ12,
+ GPIO136_SM_ADQ13,
+ GPIO137_SM_ADQ14,
+ GPIO138_SM_ADQ15,
+
+ /* RSTn_LAN */
+ GPIO141_GPIO | PIN_OUTPUT_HIGH,
+};
+
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
@@ -243,6 +283,9 @@ void __init mop500_pins_init(void)
if (machine_is_hrefv60())
nmk_config_pins(mop500_pins_hrefv60,
ARRAY_SIZE(mop500_pins_hrefv60));
+ else if (machine_is_snowball())
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
else
nmk_config_pins(mop500_pins_default,
ARRAY_SIZE(mop500_pins_default));
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 0f2e522f387d..2735d03996cf 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.max_uV = 2900000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* must be on for display */
+ .boot_on = 1, /* display is on at boot */
+ /*
+ * This voltage cannot be disabled right now because
+ * it is somehow affecting the external MMC
+ * functionality, though that typically will use
+ * AUX3.
+ */
+ .always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
.consumer_supplies = ab8500_vaux1_consumers,
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 7c6cb4fa47a9..d0cb9e5eb87c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -32,13 +32,32 @@
#define MCI_DATA31DIREN (1 << 5)
#define MCI_FBCLKEN (1 << 7)
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
unsigned char power_mode)
{
- if (power_mode == MMC_POWER_UP)
- gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);
- else if (power_mode == MMC_POWER_OFF)
- gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);
+ switch (power_mode) {
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ /*
+ * Level shifter voltage should depend on vdd to when deciding
+ * on either 1.8V or 2.9V. Once the decision has been made the
+ * level shifter must be disabled and re-enabled with a changed
+ * select signal in order to switch the voltage. Since there is
+ * no framework support yet for indicating 1.8V in vdd, use the
+ * default 2.9V.
+ */
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 1);
+ break;
+ case MMC_POWER_OFF:
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 0);
+ break;
+ }
return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
MCI_DATA2DIREN | MCI_DATA31DIREN;
@@ -67,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
static struct mmci_platform_data mop500_sdi0_data = {
.vdd_handler = mop500_sdi0_vdd_handler,
.ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
@@ -77,10 +98,6 @@ static struct mmci_platform_data mop500_sdi0_data = {
#endif
};
-/* GPIO pins used by the sdi0 level shifter */
-static int sdi0_en = -1;
-static int sdi0_vsel = -1;
-
static void sdi0_configure(void)
{
int ret;
@@ -140,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
static struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
- .f_max = 100000000,
+ .f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -1,
.gpio_wp = -1,
@@ -177,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
static struct mmci_platform_data mop500_sdi4_data = {
.ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
+ .f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
@@ -199,17 +216,27 @@ void __init mop500_sdi_init(void)
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+ /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
+ if (!machine_is_snowball())
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ if (machine_is_hrefv60() || machine_is_snowball()) {
+ if (machine_is_hrefv60()) {
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ } else if (machine_is_snowball()) {
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ }
sdi0_configure();
}
+
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 69cce41f602a..5af36aa56c08 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -25,7 +25,7 @@ struct uib {
void (*init)(void);
};
-static struct __initdata uib mop500_uibs[] = {
+static struct uib __initdata mop500_uibs[] = {
[STUIB] = {
.name = "ST-UIB",
.option = "stuib",
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2a08c07dec6d..cd54abaccd96 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -26,9 +26,11 @@
#include <linux/mfd/ab8500/gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
+#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,6 +49,26 @@
#include "board-mop500.h"
#include "board-mop500-regulators.h"
+static struct gpio_led snowball_led_array[] = {
+ {
+ .name = "user_led",
+ .default_trigger = "none",
+ .gpio = 142,
+ },
+};
+
+static struct gpio_led_platform_data snowball_led_data = {
+ .leds = snowball_led_array,
+ .num_leds = ARRAY_SIZE(snowball_led_array),
+};
+
+static struct platform_device snowball_led_dev = {
+ .name = "leds-gpio",
+ .dev = {
+ .platform_data = &snowball_led_data,
+ },
+};
+
static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_GPIO(0),
.irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
@@ -69,6 +91,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
0x7A, 0x00, 0x00},
};
+static struct gpio_keys_button snowball_key_array[] = {
+ {
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_1,
+ .desc = "userpb",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 151,
+ .type = EV_KEY,
+ .code = KEY_2,
+ .desc = "extkb1",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 152,
+ .type = EV_KEY,
+ .code = KEY_3,
+ .desc = "extkb2",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 161,
+ .type = EV_KEY,
+ .code = KEY_4,
+ .desc = "extkb3",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 162,
+ .type = EV_KEY,
+ .code = KEY_5,
+ .desc = "extkb4",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+ .buttons = snowball_key_array,
+ .nbuttons = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &snowball_key_data,
+ }
+};
+
+static struct smsc911x_platform_config snowball_sbnet_cfg = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .shift = 1,
+};
+
+static struct resource sbnet_res[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = (0x5000 << 16),
+ .end = (0x5000 << 16) + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(140),
+ .end = NOMADIK_GPIO_TO_IRQ(140),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device snowball_sbnet_dev = {
+ .name = "smsc911x",
+ .num_resources = ARRAY_SIZE(sbnet_res),
+ .resource = sbnet_res,
+ .dev = {
+ .platform_data = &snowball_sbnet_cfg,
+ },
+};
+
static struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
.regulator_reg_init = ab8500_regulator_reg_init,
@@ -295,8 +408,9 @@ static void mop500_prox_deactivate(struct device *dev)
}
/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
+static struct platform_device *mop500_platform_devs[] __initdata = {
&mop500_gpio_keys_device,
+ &ab8500_device,
};
#ifdef CONFIG_STE_DMA40
@@ -478,6 +592,13 @@ static void __init mop500_uart_init(void)
db8500_add_uart2(&uart2_plat);
}
+static struct platform_device *snowball_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+ &snowball_sbnet_dev,
+ &ab8500_device,
+};
+
static void __init mop500_init_machine(void)
{
int i2c0_devs;
@@ -487,24 +608,29 @@ static void __init mop500_init_machine(void)
* all these GPIO pins to the internal GPIO controller
* instead.
*/
- if (machine_is_hrefv60())
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- else
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+ if (!machine_is_snowball()) {
+ if (machine_is_hrefv60())
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+ else
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+ }
u8500_init_devices();
mop500_pins_init();
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ if (machine_is_snowball())
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+ else
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
mop500_spi_init();
mop500_uart_init();
- platform_device_register(&ab8500_device);
-
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
if (machine_is_hrefv60())
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
@@ -512,6 +638,9 @@ static void __init mop500_init_machine(void)
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -531,3 +660,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.timer = &ux500_timer,
.init_machine = mop500_init_machine,
MACHINE_END
+
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+ .boot_params = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .init_machine = mop500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 03a31cc9b084..ee77a8970c33 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,6 +7,11 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
+/* snowball GPIO for MMC card */
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
+
/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_TOUCH_RST_GPIO 143
#define HREFV60_PROX_SENSE_GPIO 217
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 7d107be63eb4..e832664d1bd9 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <plat/mtu.h>
#include <mach/hardware.h>
@@ -742,6 +743,51 @@ err_out:
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_DEBUG_FS) */
+unsigned long clk_smp_twd_rate = 400000000;
+
+unsigned long clk_smp_twd_get_rate(struct clk *clk)
+{
+ return clk_smp_twd_rate;
+}
+
+static struct clk clk_smp_twd = {
+ .get_rate = clk_smp_twd_get_rate,
+ .name = "smp_twd",
+};
+
+static struct clk_lookup clk_smp_twd_lookup = {
+ .dev_id = "smp_twd",
+ .clk = &clk_smp_twd,
+};
+
+#ifdef CONFIG_CPU_FREQ
+
+static int clk_twd_cpufreq_transition(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct cpufreq_freqs *f = data;
+
+ if (state == CPUFREQ_PRECHANGE) {
+ /* Save frequency in simple Hz */
+ clk_smp_twd_rate = f->new * 1000;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block clk_twd_cpufreq_nb = {
+ .notifier_call = clk_twd_cpufreq_transition,
+};
+
+static int clk_init_smp_twd_cpufreq(void)
+{
+ return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+late_initcall(clk_init_smp_twd_cpufreq);
+
+#endif
+
int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
@@ -762,6 +808,8 @@ int __init clk_init(void)
else
clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+ clkdev_add(&clk_smp_twd_lookup);
+
#ifdef CONFIG_DEBUG_FS
clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
if (cpu_is_u8500ed())
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c01bc19e3c5e..22705d246fc7 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
};
static struct resource db5500_pmu_resources[] = {
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-ux500/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 088b550c40df..7dd08074c37b 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void)
if (machine_is_u8500() ||
machine_is_svp8500v1() ||
machine_is_svp8500v2() ||
- machine_is_hrefv60())
+ machine_is_hrefv60() ||
+ machine_is_snowball())
ux500_uart_base = U8500_UART2_BASE;
else if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 82e535953fd9..0a01cbdfe063 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -6,6 +6,7 @@
*/
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
+#include <linux/dma-mapping.h>
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 9cdec5aa04a0..c1f38f6625b2 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -17,4 +17,12 @@ config MACH_VERSATILE_AB
Include support for the ARM(R) Versatile Application Baseboard
for the ARM926EJ-S.
+config MACH_VERSATILE_DT
+ bool "Support Versatile platform from device tree"
+ select USE_OF
+ select CPU_ARM926T
+ help
+ Include support for the ARM(R) Versatile/PB platform,
+ using the device tree for discovery
+
endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 97cf4d831b0c..81fa3fe25e1a 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -5,4 +5,5 @@
obj-y := core.o
obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o
obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o
+obj-$(CONFIG_MACH_VERSATILE_DT) += versatile_dt.o
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 0c99cf076c63..e340a54251df 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -24,6 +24,9 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl061.h>
@@ -83,13 +86,26 @@ static struct fpga_irq_data sic_irq = {
#define PIC_MASK 0
#endif
+/* Lookup table for finding a DT node that represents the vic instance */
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,versatile-vic", },
+ {}
+};
+
+static const struct of_device_id sic_of_match[] __initconst = {
+ { .compatible = "arm,versatile-sic", },
+ {}
+};
+
void __init versatile_init_irq(void)
{
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
+ irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START);
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
+ irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START);
/*
* Interrupts on secondary controller from 0 to 8 are routed to
@@ -646,6 +662,52 @@ static struct amba_device *amba_devs[] __initdata = {
&kmi1_device,
};
+#ifdef CONFIG_OF
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
+
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL),
+
+#if 0
+ /*
+ * These entries are unnecessary because no clocks referencing
+ * them. I've left them in for now as place holders in case
+ * any of them need to be added back, but they should be
+ * removed before actually committing this patch. --gcl
+ */
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
+
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
+#endif
+ {}
+};
+#endif
+
#ifdef CONFIG_LEDS
#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index fd6404e5d788..e01422700ebb 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -23,6 +23,7 @@
#define __ASM_ARCH_VERSATILE_H
#include <linux/amba/bus.h>
+#include <linux/of_platform.h>
extern void __init versatile_init(void);
extern void __init versatile_init_early(void);
@@ -30,6 +31,9 @@ extern void __init versatile_init_irq(void);
extern void __init versatile_map_io(void);
extern struct sys_timer versatile_timer;
extern unsigned int mmc_status(struct device *dev);
+#ifdef CONFIG_OF
+extern struct of_dev_auxdata versatile_auxdata_lookup[];
+#endif
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 6911e1f5f156..4d4973dd8fba 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -30,12 +30,6 @@
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
-/* CIK guesswork */
-#define PCIBIOS_MIN_IO 0x44000000
-#define PCIBIOS_MIN_MEM 0x50000000
-
-#define pcibios_assign_all_busses() 1
-
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 13c7e5f90a82..c898deb3ada0 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -311,6 +311,9 @@ struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
void __init pci_versatile_preinit(void)
{
+ pcibios_min_io = 0x44000000;
+ pcibios_min_mem = 0x50000000;
+
__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
@@ -325,7 +328,7 @@ void __init pci_versatile_preinit(void)
/*
* map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this.
*/
-static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
int devslot = PCI_SLOT(dev->devfn);
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
new file mode 100644
index 000000000000..54e037c090f5
--- /dev/null
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -0,0 +1,51 @@
+/*
+ * Versatile board support using the device tree
+ *
+ * Copyright (C) 2010 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com>
+ * Copyright (C) 2004 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "core.h"
+
+static void __init versatile_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ versatile_auxdata_lookup, NULL);
+}
+
+static const char *versatile_dt_match[] __initconst = {
+ "arm,versatile-ab",
+ "arm,versatile-pb",
+ NULL,
+};
+
+DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
+ .map_io = versatile_map_io,
+ .init_early = versatile_init_early,
+ .init_irq = versatile_init_irq,
+ .timer = &versatile_timer,
+ .init_machine = versatile_dt_init,
+ .dt_compat = versatile_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9e6b93b1a043..d0d267a8d3f9 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = {
.rate = 1000000,
};
+static struct clk v2m_ref_clk = {
+ .rate = 32768,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup v2m_lookups[] = {
@@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = {
}, { /* CLCD */
.dev_id = "mb:clcd",
.clk = &osc1_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "mb:wdt",
+ .clk = &v2m_ref_clk,
}, { /* SP804 timers */
.dev_id = "sp804",
.con_id = "v2m-timer0",
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/mach-w90x900/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
new file mode 100644
index 000000000000..397268c1b250
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := common.o timer.o
diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
new file mode 100644
index 000000000000..73e93687b81a
--- /dev/null
+++ b/arch/arm/mach-zynq/common.c
@@ -0,0 +1,118 @@
+/*
+ * This file contains common code that is intended to be used across
+ * boards so that it's not replicated.
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/zynq_soc.h>
+#include <mach/clkdev.h>
+#include "common.h"
+
+static struct of_device_id zynq_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ {}
+};
+
+/**
+ * xilinx_init_machine() - System specific initialization, intended to be
+ * called from board specific initialization.
+ */
+static void __init xilinx_init_machine(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * 64KB way size, 8-way associativity, parity disabled
+ */
+ l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
+#endif
+
+ of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+}
+
+/**
+ * xilinx_irq_init() - Interrupt controller initialization for the GIC.
+ */
+static void __init xilinx_irq_init(void)
+{
+ gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+}
+
+/* The minimum devices needed to be mapped before the VM system is up and
+ * running include the GIC, UART and Timer Counter.
+ */
+
+static struct map_desc io_desc[] __initdata = {
+ {
+ .virtual = TTC0_VIRT,
+ .pfn = __phys_to_pfn(TTC0_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = SCU_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = PL310_L2CC_VIRT,
+ .pfn = __phys_to_pfn(PL310_L2CC_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = UART0_VIRT,
+ .pfn = __phys_to_pfn(UART0_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+
+};
+
+/**
+ * xilinx_map_io() - Create memory mappings needed for early I/O.
+ */
+static void __init xilinx_map_io(void)
+{
+ iotable_init(io_desc, ARRAY_SIZE(io_desc));
+}
+
+static const char *xilinx_dt_match[] = {
+ "xlnx,zynq-ep107",
+ NULL
+};
+
+MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
+ .map_io = xilinx_map_io,
+ .init_irq = xilinx_irq_init,
+ .init_machine = xilinx_init_machine,
+ .timer = &xttcpss_sys_timer,
+ .dt_compat = xilinx_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/include/mach/hardware.h b/arch/arm/mach-zynq/common.h
index 56e43b3a5b97..a009644a1555 100644
--- a/arch/arm/mach-tegra/include/mach/hardware.h
+++ b/arch/arm/mach-zynq/common.h
@@ -1,11 +1,8 @@
/*
- * arch/arm/mach-tegra/include/mach/hardware.h
+ * This file contains common function prototypes to avoid externs
+ * in the c files.
*
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
+ * Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -15,14 +12,13 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
*/
-#ifndef __MACH_TEGRA_HARDWARE_H
-#define __MACH_TEGRA_HARDWARE_H
+#ifndef __MACH_ZYNQ_COMMON_H__
+#define __MACH_ZYNQ_COMMON_H__
+
+#include <asm/mach/time.h>
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0
-#define pcibios_assign_all_busses() 1
+extern struct sys_timer xttcpss_sys_timer;
#endif
diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h
new file mode 100644
index 000000000000..c6e73d81a459
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/clkdev.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-zynq/include/mach/clkdev.h
+ *
+ * Copyright (C) 2011 Xilinx, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLKDEV_H__
+#define __MACH_CLKDEV_H__
+
+#include <plat/clock.h>
+
+struct clk {
+ unsigned long rate;
+ const struct clk_ops *ops;
+ const struct icst_params *params;
+ void __iomem *vcoreg;
+};
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9f664d5eb81d
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* arch/arm/mach-zynq/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/zynq_soc.h>
+#include <mach/uart.h>
+
+ .macro addruart, rp, rv
+ ldr \rp, =LL_UART_PADDR @ physical
+ ldr \rv, =LL_UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register
+ tst \rd, #UART_SR_TXFULL @
+ bne 1002b @ wait if FIFO is full
+ .endm
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
new file mode 100644
index 000000000000..3cfc01b37461
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-zynq/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * based on arch/plat-mxc/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-gic.S>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h
new file mode 100644
index 000000000000..d558d8a94be7
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-zynq/include/mach/hardware.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_HARDWARE_H__
+#define __MACH_HARDWARE_H__
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/io.h b/arch/arm/mach-zynq/include/mach/io.h
new file mode 100644
index 000000000000..39d9885e0e9a
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-zynq/include/mach/io.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IO_H__
+#define __MACH_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* IO address mapping macros, nothing special at this time but required */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/irqs.h b/arch/arm/mach-zynq/include/mach/irqs.h
new file mode 100644
index 000000000000..5fb04fd3bac8
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/irqs.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-zynq/include/mach/irqs.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_GPIOS 118
+#define NR_IRQS (128 + ARCH_NR_GPIOS)
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
new file mode 100644
index 000000000000..35a92634dcc1
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/memory.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-zynq/include/mach/memory.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MEMORY_H__
+#define __MACH_MEMORY_H__
+
+#include <asm/sizes.h>
+
+#define PLAT_PHYS_OFFSET UL(0x0)
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/system.h
index 66cd3f4fc896..1b84d705c675 100644
--- a/arch/arm/mach-tegra/include/mach/clkdev.h
+++ b/arch/arm/mach-zynq/include/mach/system.h
@@ -1,10 +1,6 @@
-/*
- * arch/arm/mach-tegra/include/mach/clkdev.h
+/* arch/arm/mach-zynq/include/mach/system.h
*
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
+ * Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -14,21 +10,19 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
*/
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-struct clk;
+#ifndef __MACH_SYSTEM_H__
+#define __MACH_SYSTEM_H__
-static inline int __clk_get(struct clk *clk)
+static inline void arch_idle(void)
{
- return 1;
+ cpu_do_idle();
}
-static inline void __clk_put(struct clk *clk)
+static inline void arch_reset(char mode, const char *cmd)
{
+ /* Add architecture specific reset processing here */
}
#endif
diff --git a/arch/arm/mach-zynq/include/mach/timex.h b/arch/arm/mach-zynq/include/mach/timex.h
new file mode 100644
index 000000000000..6c0245e42a5e
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/timex.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-zynq/include/mach/timex.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_TIMEX_H__
+#define __MACH_TIMEX_H__
+
+/* the following is needed for the system to build but will be removed
+ in the future, the value is not important but won't hurt
+*/
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h
new file mode 100644
index 000000000000..5c47c97156f3
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/uart.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-zynq/include/mach/uart.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UART_H__
+#define __MACH_UART_H__
+
+#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
+#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
+#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
+
+#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h
new file mode 100644
index 000000000000..af4e8447bfa3
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/* arch/arm/mach-zynq/include/mach/uncompress.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H__
+#define __MACH_UNCOMPRESS_H__
+
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <mach/zynq_soc.h>
+#include <mach/uart.h>
+
+void arch_decomp_setup(void)
+{
+}
+
+static inline void flush(void)
+{
+ /*
+ * Wait while the FIFO is not empty
+ */
+ while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+ UART_SR_TXEMPTY))
+ cpu_relax();
+}
+
+#define arch_decomp_wdog()
+
+static void putc(char ch)
+{
+ /*
+ * Wait for room in the FIFO, then write the char into the FIFO
+ */
+ while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+ UART_SR_TXFULL)
+ cpu_relax();
+
+ __raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
+}
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h
new file mode 100644
index 000000000000..2398eff1e8b8
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-zynq/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_VMALLOC_H__
+#define __MACH_VMALLOC_H__
+
+#define VMALLOC_END 0xE0000000UL
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
new file mode 100644
index 000000000000..d0d3f8fb06dd
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -0,0 +1,48 @@
+/* arch/arm/mach-zynq/include/mach/zynq_soc.h
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_XILINX_SOC_H__
+#define __MACH_XILINX_SOC_H__
+
+#define PERIPHERAL_CLOCK_RATE 2500000
+
+/* For now, all mappings are flat (physical = virtual)
+ */
+#define UART0_PHYS 0xE0000000
+#define UART0_VIRT UART0_PHYS
+
+#define TTC0_PHYS 0xF8001000
+#define TTC0_VIRT TTC0_PHYS
+
+#define PL310_L2CC_PHYS 0xF8F02000
+#define PL310_L2CC_VIRT PL310_L2CC_PHYS
+
+#define SCU_PERIPH_PHYS 0xF8F00000
+#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS
+
+/* The following are intended for the devices that are mapped early */
+
+#define TTC0_BASE IOMEM(TTC0_VIRT)
+#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
+#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
+#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
+#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
+
+/*
+ * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
+ */
+#define LL_UART_PADDR UART0_PHYS
+#define LL_UART_VADDR UART0_VIRT
+
+#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
new file mode 100644
index 000000000000..c2c96cc7d6e7
--- /dev/null
+++ b/arch/arm/mach-zynq/timer.c
@@ -0,0 +1,298 @@
+/*
+ * This file contains driver for the Xilinx PS Timer Counter IP.
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/zynq_soc.h>
+#include "common.h"
+
+#define IRQ_TIMERCOUNTER0 42
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+ *
+ * The input frequency to the timer module in silicon will be 200MHz. With the
+ * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
+ */
+#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */
+#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */
+
+#define XTTCPSS_TIMER_BASE TTC0_BASE
+#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1)
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */
+#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */
+#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */
+#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+
+#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
+
+/* Setup the timers to use pre-scaling */
+
+#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
+
+/**
+ * struct xttcpss_timer - This definition defines local timer structure
+ *
+ * @base_addr: Base address of timer
+ **/
+struct xttcpss_timer {
+ void __iomem *base_addr;
+};
+
+static struct xttcpss_timer timers[2];
+static struct clock_event_device xttcpss_clockevent;
+
+/**
+ * xttcpss_set_interval - Set the timer interval value
+ *
+ * @timer: Pointer to the timer instance
+ * @cycles: Timer interval ticks
+ **/
+static void xttcpss_set_interval(struct xttcpss_timer *timer,
+ unsigned long cycles)
+{
+ u32 ctrl_reg;
+
+ /* Disable the counter, set the counter value and re-enable counter */
+ ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+
+ __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+
+ /* Reset the counter (0x10) so that it starts from 0, one-shot
+ mode makes this needed for timing to be right. */
+ ctrl_reg |= 0x10;
+ ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq: IRQ number of the Timer
+ * @dev_id: void pointer to the xttcpss_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &xttcpss_clockevent;
+ struct xttcpss_timer *timer = dev_id;
+
+ /* Acknowledge the interrupt and call event handler */
+ __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
+ timer->base_addr + XTTCPSS_ISR_OFFSET);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction event_timer_irq = {
+ .name = "xttcpss clockevent",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = xttcpss_clock_event_interrupt,
+};
+
+/**
+ * xttcpss_timer_hardware_init - Initialize the timer hardware
+ *
+ * Initialize the hardware to start the clock source, get the clock
+ * event timer ready to use, and hook up the interrupt.
+ **/
+static void __init xttcpss_timer_hardware_init(void)
+{
+ /* Setup the clock source counter to be an incrementing counter
+ * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+ it by 32 also. Let it start running now.
+ */
+ timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
+
+ __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_IER_OFFSET);
+ __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+
+ /* Setup the clock event timer to be an interval timer which
+ * is prescaled by 32 using the interval interrupt. Leave it
+ * disabled for now.
+ */
+
+ timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
+
+ __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
+ XTTCPSS_IER_OFFSET);
+
+ /* Setup IRQ the clock event timer */
+ event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
+ setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
+}
+
+/**
+ * __raw_readl_cycles - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __raw_readl_cycles(struct clocksource *cs)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
+
+ return (cycle_t)__raw_readl(timer->base_addr +
+ XTTCPSS_COUNT_VAL_OFFSET);
+}
+
+
+/*
+ * Instantiate and initialize the clock source structure
+ */
+static struct clocksource clocksource_xttcpss = {
+ .name = "xttcpss_timer1",
+ .rating = 200, /* Reasonable clock source */
+ .read = __raw_readl_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/**
+ * xttcpss_set_next_event - Sets the time interval for next event
+ *
+ * @cycles: Timer interval ticks
+ * @evt: Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int xttcpss_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+
+ xttcpss_set_interval(timer, cycles);
+ return 0;
+}
+
+/**
+ * xttcpss_set_mode - Sets the mode of timer
+ *
+ * @mode: Mode to be set
+ * @evt: Address of clock event instance
+ **/
+static void xttcpss_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+ u32 ctrl_reg;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ xttcpss_set_interval(timer, TIMER_RATE / HZ);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ break;
+ }
+}
+
+/*
+ * Instantiate and initialize the clock event structure
+ */
+static struct clock_event_device xttcpss_clockevent = {
+ .name = "xttcpss_timer2",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = xttcpss_set_next_event,
+ .set_mode = xttcpss_set_mode,
+ .rating = 200,
+};
+
+/**
+ * xttcpss_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ **/
+static void __init xttcpss_timer_init(void)
+{
+ xttcpss_timer_hardware_init();
+ clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
+
+ /* Calculate the parameters to allow the clockevent to operate using
+ integer math
+ */
+ clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
+
+ xttcpss_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
+ xttcpss_clockevent.min_delta_ns =
+ clockevent_delta2ns(1, &xttcpss_clockevent);
+
+ /* Indicate that clock event is on 1st CPU as SMP boot needs it */
+
+ xttcpss_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&xttcpss_clockevent);
+}
+
+/*
+ * Instantiate and initialize the system timer structure
+ */
+struct sys_timer xttcpss_sys_timer = {
+ .init = xttcpss_timer_init,
+};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 0074b8dba793..88633fe01a5d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -821,7 +821,8 @@ config CACHE_L2X0
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S
index 52162d59407a..2cbf68ef0e83 100644
--- a/arch/arm/mm/abort-macro.S
+++ b/arch/arm/mm/abort-macro.S
@@ -17,7 +17,7 @@
cmp \tmp, # 0x5600 @ Is it ldrsb?
orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes
tst \tmp, #1 << 11 @ L = 0 -> write
- orreq \psr, \psr, #1 << 11 @ yes.
+ orreq \fsr, \fsr, #1 << 11 @ yes.
b do_DataAbort
not_thumb:
.endm
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index be7c638b648b..cfbcf8b95599 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -22,6 +22,7 @@
#include <linux/sched.h>
#include <linux/uaccess.h>
+#include <asm/system.h>
#include <asm/unaligned.h>
#include "fault.h"
@@ -95,6 +96,33 @@ static const char *usermode_action[] = {
"signal+warn"
};
+/* Return true if and only if the ARMv6 unaligned access model is in use. */
+static bool cpu_is_v6_unaligned(void)
+{
+ return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U);
+}
+
+static int safe_usermode(int new_usermode, bool warn)
+{
+ /*
+ * ARMv6 and later CPUs can perform unaligned accesses for
+ * most single load and store instructions up to word size.
+ * LDM, STM, LDRD and STRD still need to be handled.
+ *
+ * Ignoring the alignment fault is not an option on these
+ * CPUs since we spin re-faulting the instruction without
+ * making any progress.
+ */
+ if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) {
+ new_usermode |= UM_FIXUP;
+
+ if (warn)
+ printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n");
+ }
+
+ return new_usermode;
+}
+
static int alignment_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "User:\t\t%lu\n", ai_user);
@@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer
if (get_user(mode, buffer))
return -EFAULT;
if (mode >= '0' && mode <= '5')
- ai_usermode = mode - '0';
+ ai_usermode = safe_usermode(mode - '0', true);
}
return count;
}
@@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (ai_usermode & UM_FIXUP)
goto fixup;
- if (ai_usermode & UM_SIGNAL)
- force_sig(SIGBUS, current);
- else {
+ if (ai_usermode & UM_SIGNAL) {
+ siginfo_t si;
+
+ si.si_signo = SIGBUS;
+ si.si_errno = 0;
+ si.si_code = BUS_ADRALN;
+ si.si_addr = (void __user *)addr;
+
+ force_sig_info(si.si_signo, &si, current);
+ } else {
/*
* We're about to disable the alignment trap and return to
* user space. But if an interrupt occurs before actually
@@ -926,20 +961,11 @@ static int __init alignment_init(void)
return -ENOMEM;
#endif
- /*
- * ARMv6 and later CPUs can perform unaligned accesses for
- * most single load and store instructions up to word size.
- * LDM, STM, LDRD and STRD still need to be handled.
- *
- * Ignoring the alignment fault is not an option on these
- * CPUs since we spin re-faulting the instruction without
- * making any progress.
- */
- if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+ if (cpu_is_v6_unaligned()) {
cr_alignment &= ~CR_A;
cr_no_alignment &= ~CR_A;
set_cr(cr_alignment);
- ai_usermode = UM_FIXUP;
+ ai_usermode = safe_usermode(ai_usermode, false);
}
hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 44c086710d2b..9ecfdb511951 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -277,6 +277,25 @@ static void l2x0_disable(void)
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void __init l2x0_unlock(__u32 cache_id)
+{
+ int lockregs;
+ int i;
+
+ if (cache_id == L2X0_CACHE_ID_PART_L310)
+ lockregs = 8;
+ else
+ /* L210 and unknown types */
+ lockregs = 1;
+
+ for (i = 0; i < lockregs; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+}
+
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
@@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
* accessing the below registers will fault.
*/
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ /* Make sure that I&D is not locked down when starting */
+ l2x0_unlock(cache_id);
/* l2x0 controller is disabled */
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2fee782077c1..cc7e2d8be9aa 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
- return memblock_is_memory(pfn << PAGE_SHIFT);
+ return memblock_is_memory(__pfn_to_phys(pfn));
}
EXPORT_SYMBOL(pfn_valid);
#endif
@@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
static inline void poison_init_mem(void *s, size_t count)
{
u32 *p = (u32 *)s;
- while ((count = count - 4))
+ for (; count != 0; count -= 4)
*p++ = 0xe7fddef0;
}
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
index ffad039cbb73..430df1a5978d 100644
--- a/arch/arm/mm/iomap.c
+++ b/arch/arm/mm/iomap.c
@@ -9,6 +9,9 @@
#include <linux/ioport.h>
#include <linux/io.h>
+unsigned long vga_base;
+EXPORT_SYMBOL(vga_base);
+
#ifdef __io
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
@@ -23,6 +26,15 @@ EXPORT_SYMBOL(ioport_unmap);
#endif
#ifdef CONFIG_PCI
+unsigned long pcibios_min_io = 0x1000;
+EXPORT_SYMBOL(pcibios_min_io);
+
+unsigned long pcibios_min_mem = 0x01000000;
+EXPORT_SYMBOL(pcibios_min_mem);
+
+unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC;
+EXPORT_SYMBOL(pci_flags);
+
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
resource_size_t start = pci_resource_start(dev, bar);
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 92bd102e3982..2e6849b41f66 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 3
+.equ cpu_arm920_suspend_size, 4 * 4
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r7, lr}
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 2bbcf053dffd..cd8f79c3a282 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 3
+.equ cpu_arm926_suspend_size, 4 * 4
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r7, lr}
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index f8f7ea34bfc5..683af3a182b7 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -410,6 +410,7 @@ __arm946_proc_info:
.long 0x41009460
.long 0xff00fff0
.long 0
+ .long 0
b __arm946_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -418,6 +419,6 @@ __arm946_proc_info:
.long arm946_processor_functions
.long 0
.long 0
- .long arm940_cache_fns
+ .long arm946_cache_fns
.size __arm946_proc_info, . - __arm946_proc_info
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 07219c2ae114..69e7f2ef7384 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
ldmia r0, {r4 - r7} @ load cp regs
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 219138d2f158..a923aa0fd00d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -223,6 +223,22 @@ __v6_setup:
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
+#ifdef CONFIG_ARM_ERRATA_364296
+ /*
+ * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
+ * corruption with hit-under-miss enabled). The conditional code below
+ * (setting the undocumented bit 31 in the auxiliary control register
+ * and the FI bit in the control register) disables hit-under-miss
+ * without putting the processor into full low interrupt latency mode.
+ */
+ ldr r6, =0x4107b362 @ id for ARM1136 r0p2
+ mrc p15, 0, r5, c0, c0, 0 @ get processor id
+ teq r5, r6 @ check for the faulty core
+ mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg
+ orreq r5, r5, #(1 << 31) @ set the undocumented bit 31
+ mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg
+ orreq r0, r0, #(1 << 21) @ low interrupt latency configuration
+#endif
mov pc, lr @ return to head.S:__ret
/*
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a30e78542ccf..9049c0764db2 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin)
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
+ THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
isb
mov pc, r0
@@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume)
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
+ teq r4, r10 @ Is it already set?
+ mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
+ dsb
mov r0, r9 @ control register
mov r2, r7, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 64f1fc7edf0a..755e1bf22681 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
-#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
@@ -407,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 8
+.equ cpu_xsc3_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
@@ -419,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend)
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ stmia r0, {r4 - r10} @ store cp regs
ldmia sp!, {r4 - r10, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ ldmia r0, {r4 - r10} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 43f2b158237c..845549cbbb27 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -374,6 +374,9 @@ void __init iop3xx_pci_preinit_cond(void)
void __init iop3xx_pci_preinit(void)
{
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
iop3xx_atu_disable();
iop3xx_atu_setup();
iop3xx_atu_debug();
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index fb166b20f60f..0d6ed31bdbf2 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -95,8 +95,22 @@ struct device mxc_aips_bus = {
.parent = &platform_bus,
};
+struct device mxc_ahb_bus = {
+ .init_name = "mxc_ahb",
+ .parent = &platform_bus,
+};
+
static int __init mxc_device_init(void)
{
- return device_register(&mxc_aips_bus);
+ int ret;
+
+ ret = device_register(&mxc_aips_bus);
+ if (IS_ERR_VALUE(ret))
+ goto done;
+
+ ret = device_register(&mxc_ahb_bus);
+
+done:
+ return ret;
}
core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 4fc6ffc2a13e..0bae44e890db 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -11,40 +11,45 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#define imx_fec_data_entry_single(soc) \
+#define imx_fec_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _FEC_BASE_ADDR, \
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
- imx_fec_data_entry_single(MX25);
+ imx_fec_data_entry_single(MX25, "imx25-fec");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
- imx_fec_data_entry_single(MX27);
+ imx_fec_data_entry_single(MX27, "imx27-fec");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX35
+/* i.mx35 has the i.mx27 type fec */
const struct imx_fec_data imx35_fec_data __initconst =
- imx_fec_data_entry_single(MX35);
+ imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
#ifdef CONFIG_SOC_IMX50
+/* i.mx50 has the i.mx25 type fec */
const struct imx_fec_data imx50_fec_data __initconst =
- imx_fec_data_entry_single(MX50);
+ imx_fec_data_entry_single(MX50, "imx25-fec");
#endif
#ifdef CONFIG_SOC_IMX51
+/* i.mx51 has the i.mx27 type fec */
const struct imx_fec_data imx51_fec_data __initconst =
- imx_fec_data_entry_single(MX51);
+ imx_fec_data_entry_single(MX51, "imx27-fec");
#endif
#ifdef CONFIG_SOC_IMX53
+/* i.mx53 has the i.mx25 type fec */
const struct imx_fec_data imx53_fec_data __initconst =
- imx_fec_data_entry_single(MX53);
+ imx_fec_data_entry_single(MX53, "imx25-fec");
#endif
struct platform_device *__init imx_add_fec(
@@ -63,7 +68,7 @@ struct platform_device *__init imx_add_fec(
},
};
- return imx_add_platform_device_dmamask("fec", 0,
+ return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index c64f015e031b..7fa7e9c92468 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -6,207 +6,29 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
#include <mach/devices-common.h>
-#include <mach/sdma.h>
-
-struct imx_imx_sdma_data {
- resource_size_t iobase;
- resource_size_t irq;
- struct sdma_platform_data pdata;
-};
-
-#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\
- { \
- .iobase = soc ## _SDMA ## _BASE_ADDR, \
- .irq = soc ## _INT_SDMA, \
- .pdata = { \
- .sdma_version = _sdma_version, \
- .cpu_name = _cpu_name, \
- .to_version = _to_version, \
- }, \
- }
-
-#ifdef CONFIG_SOC_IMX25
-struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-#ifdef CONFIG_SOC_IMX31
-struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
-#endif /* ifdef CONFIG_SOC_IMX51 */
+struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+{
+ return platform_device_register_resndata(&mxc_ahb_bus,
+ "imx-dma", -1, NULL, 0, NULL, 0);
+}
-static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
- const struct imx_imx_sdma_data *data)
+struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
+ resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
{
struct resource res[] = {
{
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
+ .start = iobase,
+ .end = iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = data->irq,
- .end = data->irq,
+ .start = irq,
+ .end = irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("imx-sdma", -1,
- res, ARRAY_SIZE(res),
- &data->pdata, sizeof(data->pdata));
-}
-
-static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
-{
- return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
-}
-
-#ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25 = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1255,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1120,
- .per_2_shp_addr = 1329,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1560,
- .mcu_2_ata_addr = 1479,
- .app_2_per_addr = 1189,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1407,
- .shp_2_mcu_addr = 979,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-static struct sdma_script_start_addrs addr_imx31_to1 = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs addr_imx31_to2 = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-static struct sdma_script_start_addrs addr_imx35_to1 = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs addr_imx35_to2 = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51 = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1473,
- .mcu_2_ata_addr = 1392,
- .app_2_per_addr = 1033,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1251,
- .shp_2_mcu_addr = 892,
-};
-#endif
-
-static int __init imxXX_add_imx_dma(void)
-{
- struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27)
- if (cpu_is_mx21() || cpu_is_mx27())
- ret = imx_add_imx_dma();
- else
-#endif
-
-#if defined(CONFIG_SOC_IMX25)
- if (cpu_is_mx25()) {
- imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
- ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX31)
- if (cpu_is_mx31()) {
- int to_version = mx31_revision() >> 4;
- imx31_imx_sdma_data.pdata.to_version = to_version;
- if (to_version == 1)
- imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1;
- else
- imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2;
- ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX35)
- if (cpu_is_mx35()) {
- int to_version = mx35_revision() >> 4;
- imx35_imx_sdma_data.pdata.to_version = to_version;
- if (to_version == 1)
- imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1;
- else
- imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2;
- ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX51)
- if (cpu_is_mx51()) {
- int to_version = mx51_revision() >> 4;
- imx51_imx_sdma_data.pdata.to_version = to_version;
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
- ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
- } else
-#endif
- ret = ERR_PTR(-ENODEV);
-
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- return 0;
+ return platform_device_register_resndata(&mxc_ahb_bus, name,
+ -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
-arch_initcall(imxXX_add_imx_dma);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index 2ab74f0da9a6..afe60f7244a8 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -94,8 +94,9 @@ const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
imx53_imx_i2c_data_entry(0, 1),
imx53_imx_i2c_data_entry(1, 2),
+ imx53_imx_i2c_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_SOC_IMX51 */
+#endif /* ifdef CONFIG_SOC_IMX53 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
index 26366114b021..479c3e9f771f 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
@@ -46,6 +46,11 @@ const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX51, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX51 */
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX53, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
index 66b8593e9b69..21c6f30e1017 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -76,6 +76,16 @@ const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX51 */
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
+#define imx53_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
+ imx53_imx_ssi_data_entry(0, 1),
+ imx53_imx_ssi_data_entry(1, 2),
+ imx53_imx_ssi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 3c854c2cc6dd..2020d84956c3 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -123,6 +123,8 @@ const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
imx53_imx_uart_data_entry(0, 1),
imx53_imx_uart_data_entry(1, 2),
imx53_imx_uart_data_entry(2, 3),
+ imx53_imx_uart_data_entry(3, 4),
+ imx53_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX53 */
@@ -150,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq(
},
};
- return imx_add_platform_device("imx-uart", data->id, res,
+ return imx_add_platform_device("imx1-uart", data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
@@ -170,6 +172,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
},
};
- return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
+ /* i.mx21 type uart runs on all i.mx except i.mx1 */
+ return imx_add_platform_device("imx21-uart", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
index 6b2940b93d94..5955f5da82ee 100644
--- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -10,21 +10,22 @@
#include <mach/devices-common.h>
#include <mach/esdhc.h>
-#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \
+#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
.irq = soc ## _INT_ESDHC ## hwid, \
}
-#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid) \
- [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid)
+#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
+ [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
#ifdef CONFIG_SOC_IMX25
const struct imx_sdhci_esdhc_imx_data
imx25_sdhci_esdhc_imx_data[] __initconst = {
#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid)
+ imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid)
imx25_sdhci_esdhc_imx_data_entry(0, 1),
imx25_sdhci_esdhc_imx_data_entry(1, 2),
};
@@ -34,7 +35,7 @@ imx25_sdhci_esdhc_imx_data[] __initconst = {
const struct imx_sdhci_esdhc_imx_data
imx35_sdhci_esdhc_imx_data[] __initconst = {
#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid)
+ imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
imx35_sdhci_esdhc_imx_data_entry(0, 1),
imx35_sdhci_esdhc_imx_data_entry(1, 2),
imx35_sdhci_esdhc_imx_data_entry(2, 3),
@@ -45,7 +46,7 @@ imx35_sdhci_esdhc_imx_data[] __initconst = {
const struct imx_sdhci_esdhc_imx_data
imx51_sdhci_esdhc_imx_data[] __initconst = {
#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid)
+ imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
imx51_sdhci_esdhc_imx_data_entry(0, 1),
imx51_sdhci_esdhc_imx_data_entry(1, 2),
imx51_sdhci_esdhc_imx_data_entry(2, 3),
@@ -57,7 +58,7 @@ imx51_sdhci_esdhc_imx_data[] __initconst = {
const struct imx_sdhci_esdhc_imx_data
imx53_sdhci_esdhc_imx_data[] __initconst = {
#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX53, _id, _hwid)
+ imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
imx53_sdhci_esdhc_imx_data_entry(0, 1),
imx53_sdhci_esdhc_imx_data_entry(1, 2),
imx53_sdhci_esdhc_imx_data_entry(2, 3),
@@ -65,6 +66,11 @@ imx53_sdhci_esdhc_imx_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX53 */
+static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
+ .wp_type = ESDHC_WP_NONE,
+ .cd_type = ESDHC_CD_NONE,
+};
+
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata)
@@ -81,6 +87,13 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
},
};
- return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
+ /*
+ * If machine does not provide pdata, use the default one
+ * which means no WP/CD support
+ */
+ if (!pdata)
+ pdata = &default_esdhc_pdata;
+
+ return imx_add_platform_device(data->devid, data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/plat-mxc/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 91fc7cdb5dc9..e4dde91f0231 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#endif
+/* iMX50/53 have same addresses, but not iMX51 */
+#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR MX53_UART1_BASE_ADDR
+#endif
+
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 03f626645374..524538aabc4b 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -9,8 +9,10 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <mach/sdma.h>
extern struct device mxc_aips_bus;
+extern struct device mxc_ahb_bus;
struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
@@ -28,6 +30,7 @@ static inline struct platform_device *imx_add_platform_device(
#include <linux/fec.h>
struct imx_fec_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
@@ -274,6 +277,7 @@ struct platform_device *__init imx_add_mxc_w1(
#include <mach/esdhc.h>
struct imx_sdhci_esdhc_imx_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t irq;
@@ -293,3 +297,7 @@ struct imx_spi_imx_data {
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+struct platform_device *imx_add_imx_dma(void);
+struct platform_device *imx_add_imx_sdma(char *name,
+ resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index ef7751546f5f..233d0a5e2d68 100644
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -60,7 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan)
static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
{
- return !strcmp(dev_name(chan->device->dev), "imx-sdma") ||
+ return !strcmp(dev_name(chan->device->dev), "imx31-sdma") ||
+ !strcmp(dev_name(chan->device->dev), "imx35-sdma") ||
!strcmp(dev_name(chan->device->dev), "imx-dma");
}
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
index 86003f411755..aaf97481f413 100644
--- a/arch/arm/plat-mxc/include/mach/esdhc.h
+++ b/arch/arm/plat-mxc/include/mach/esdhc.h
@@ -10,17 +10,34 @@
#ifndef __ASM_ARCH_IMX_ESDHC_H
#define __ASM_ARCH_IMX_ESDHC_H
+enum wp_types {
+ ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
+ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
+ ESDHC_WP_GPIO, /* external gpio pin for WP */
+};
+
+enum cd_types {
+ ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
+ ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
+ ESDHC_CD_GPIO, /* external gpio pin for CD */
+ ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
+};
+
/**
- * struct esdhc_platform_data - optional platform data for esdhc on i.MX
+ * struct esdhc_platform_data - platform data for esdhc on i.MX
*
- * strongly recommended for i.MX25/35, not needed for other variants
+ * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
*
- * @wp_gpio: gpio for write_protect (-EINVAL if unused)
- * @cd_gpio: gpio for card_detect interrupt (-EINVAL if unused)
+ * @wp_gpio: gpio for write_protect
+ * @cd_gpio: gpio for card_detect interrupt
+ * @wp_type: type of write_protect method (see wp_types enum above)
+ * @cd_type: type of card_detect method (see cd_types enum above)
*/
struct esdhc_platform_data {
unsigned int wp_gpio;
unsigned int cd_gpio;
+ enum wp_types wp_type;
+ enum cd_types cd_type;
};
#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 9440b9e00e89..5408fd1fc736 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -30,6 +30,9 @@
#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
+#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
+ PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
+ | PAD_CTL_HYS)
#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
@@ -1256,7 +1259,7 @@
#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1264,7 +1267,7 @@
#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1536,7 +1539,7 @@
#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1544,7 +1547,7 @@
#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1631,25 +1634,25 @@
#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1672,7 +1675,7 @@
#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1732,7 +1735,7 @@
#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2297,7 +2300,7 @@
#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2305,7 +2308,7 @@
#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2333,7 +2336,7 @@
#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2356,7 +2359,7 @@
#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 74cd093203e0..5e3c3236ebf3 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -176,10 +176,10 @@
/*
* DMA request assignments
*/
-#define MX53_DMA_REQ_SSI3_TX1 47
-#define MX53_DMA_REQ_SSI3_RX1 46
-#define MX53_DMA_REQ_SSI3_TX2 45
-#define MX53_DMA_REQ_SSI3_RX2 44
+#define MX53_DMA_REQ_SSI3_TX0 47
+#define MX53_DMA_REQ_SSI3_RX0 46
+#define MX53_DMA_REQ_SSI3_TX1 45
+#define MX53_DMA_REQ_SSI3_RX1 44
#define MX53_DMA_REQ_UART3_TX 43
#define MX53_DMA_REQ_UART3_RX 42
#define MX53_DMA_REQ_ESAI_TX 41
@@ -194,14 +194,14 @@
#define MX53_DMA_REQ_ASRC_DMA1 32
#define MX53_DMA_REQ_EMI_WR 31
#define MX53_DMA_REQ_EMI_RD 30
-#define MX53_DMA_REQ_SSI1_TX1 29
-#define MX53_DMA_REQ_SSI1_RX1 28
-#define MX53_DMA_REQ_SSI1_TX2 27
-#define MX53_DMA_REQ_SSI1_RX2 26
-#define MX53_DMA_REQ_SSI2_TX1 25
-#define MX53_DMA_REQ_SSI2_RX1 24
-#define MX53_DMA_REQ_SSI2_TX2 23
-#define MX53_DMA_REQ_SSI2_RX2 22
+#define MX53_DMA_REQ_SSI1_TX0 29
+#define MX53_DMA_REQ_SSI1_RX0 28
+#define MX53_DMA_REQ_SSI1_TX1 27
+#define MX53_DMA_REQ_SSI1_RX1 26
+#define MX53_DMA_REQ_SSI2_TX0 25
+#define MX53_DMA_REQ_SSI2_RX0 24
+#define MX53_DMA_REQ_SSI2_TX1 23
+#define MX53_DMA_REQ_SSI2_RX1 22
#define MX53_DMA_REQ_I2C2_SDHC2 21
#define MX53_DMA_REQ_I2C1_SDHC1 20
#define MX53_DMA_REQ_UART1_TX 19
@@ -241,7 +241,7 @@
#define MX53_INT_IPU_ERR 10
#define MX53_INT_IPU_SYN 11
#define MX53_INT_GPU 12
-#define MX53_INT_RESV13 13
+#define MX53_INT_UART4 13
#define MX53_INT_USB_H1 14
#define MX53_INT_EMI 15
#define MX53_INT_USB_H2 16
@@ -314,7 +314,7 @@
#define MX53_INT_CAN2 83
#define MX53_INT_GPU2_IRQ 84
#define MX53_INT_GPU2_BUSY 85
-#define MX53_INT_RESV86 86
+#define MX53_INT_UART5 86
#define MX53_INT_FEC 87
#define MX53_INT_OWIRE 88
#define MX53_INT_CTI1_TG2 89
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
index 913e0432e40e..3a3942823c20 100644
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ b/arch/arm/plat-mxc/include/mach/sdma.h
@@ -48,15 +48,11 @@ struct sdma_script_start_addrs {
/**
* struct sdma_platform_data - platform specific data for SDMA engine
*
- * @sdma_version The version of this SDMA engine
- * @cpu_name used to generate the firmware name
- * @to_version CPU Tape out version
+ * @fw_name The firmware name
* @script_addrs SDMA scripts addresses in SDMA ROM
*/
struct sdma_platform_data {
- int sdma_version;
- char *cpu_name;
- int to_version;
+ char *fw_name;
struct sdma_script_start_addrs *script_addrs;
};
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d85e2d1c0324..88fd40452567 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
case MACH_TYPE_MX53_EVK:
case MACH_TYPE_MX53_LOCO:
case MACH_TYPE_MX53_SMD:
+ case MACH_TYPE_MX53_ARD:
uart_base = MX53_UART1_BASE_ADDR;
break;
default:
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c
index e1c6eff7258a..96953e2e4f11 100644
--- a/arch/arm/plat-mxc/irq-common.c
+++ b/arch/arm/plat-mxc/irq-common.c
@@ -42,17 +42,16 @@ EXPORT_SYMBOL(imx_irq_set_priority);
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
{
- struct mxc_irq_chip *chip;
- struct irq_chip *base;
+ struct irq_chip_generic *gc;
+ int (*set_irq_fiq)(unsigned int, unsigned int);
int ret;
ret = -ENOSYS;
- base = irq_get_chip(irq);
- if (base) {
- chip = container_of(base, struct mxc_irq_chip, base);
- if (chip->set_irq_fiq)
- ret = chip->set_irq_fiq(irq, type);
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ set_irq_fiq = gc->private;
+ ret = set_irq_fiq(irq, type);
}
return ret;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 710f2e7da4ce..f257fccdc394 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -68,78 +68,34 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
return 0;
}
+#else
+#define tzic_set_irq_fiq NULL
#endif
-/**
- * tzic_mask_irq() - Disable interrupt source "d" in the TZIC
- *
- * @param d interrupt source
- */
-static void tzic_mask_irq(struct irq_data *d)
-{
- int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
- __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
-}
-
-/**
- * tzic_unmask_irq() - Enable interrupt source "d" in the TZIC
- *
- * @param d interrupt source
- */
-static void tzic_unmask_irq(struct irq_data *d)
-{
- int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
- __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
-}
-
-static unsigned int wakeup_intr[4];
+static unsigned int *wakeup_intr[4];
-/**
- * tzic_set_wake_irq() - Set interrupt source "d" in the TZIC as a wake-up source.
- *
- * @param d interrupt source
- * @param enable enable as wake-up if equal to non-zero
- * disble as wake-up if equal to zero
- *
- * @return This function returns 0 on success.
- */
-static int tzic_set_wake_irq(struct irq_data *d, unsigned int enable)
+static __init void tzic_init_gc(unsigned int irq_start)
{
- unsigned int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
-
- if (index > 3)
- return -EINVAL;
-
- if (enable)
- wakeup_intr[index] |= (1 << off);
- else
- wakeup_intr[index] &= ~(1 << off);
-
- return 0;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ int idx = irq_start >> 5;
+
+ gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
+ handle_level_irq);
+ gc->private = tzic_set_irq_fiq;
+ gc->wake_enabled = IRQ_MSK(32);
+ wakeup_intr[idx] = &gc->wake_active;
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->regs.disable = TZIC_ENCLEAR0(idx);
+ ct->regs.enable = TZIC_ENSET0(idx);
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-static struct mxc_irq_chip mxc_tzic_chip = {
- .base = {
- .name = "MXC_TZIC",
- .irq_ack = tzic_mask_irq,
- .irq_mask = tzic_mask_irq,
- .irq_unmask = tzic_unmask_irq,
- .irq_set_wake = tzic_set_wake_irq,
- },
-#ifdef CONFIG_FIQ
- .set_irq_fiq = tzic_set_irq_fiq,
-#endif
-};
-
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
@@ -168,11 +124,8 @@ void __init tzic_init_irq(void __iomem *irqbase)
/* all IRQ no FIQ Warning :: No selection */
- for (i = 0; i < TZIC_NUM_IRQS; i++) {
- irq_set_chip_and_handler(i, &mxc_tzic_chip.base,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
+ for (i = 0; i < TZIC_NUM_IRQS; i += 32)
+ tzic_init_gc(i);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
@@ -199,7 +152,7 @@ int tzic_enable_wake(int is_idle)
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
- wakeup_intr[i];
+ *wakeup_intr[i];
__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 6e6735f04ee3..bb8f4a6b3e37 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -13,6 +13,7 @@ config ARCH_OMAP1
bool "TI OMAP1"
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
help
"Systems based on omap7xx, omap15xx or omap16xx"
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 964704f40bbe..3ba4d11ca73e 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -475,8 +475,41 @@ int __init clk_init(struct clk_functions * custom_clocks)
/*
* debugfs support to trace clock tree hierarchy and attributes
*/
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
static struct dentry *clk_debugfs_root;
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate, c->usecount);
+ }
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static int clk_debugfs_register_one(struct clk *c)
{
int err;
@@ -545,6 +578,12 @@ static int __init clk_debugfs_init(void)
if (err)
goto err_out;
}
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
return 0;
err_out:
debugfs_remove_recursive(clk_debugfs_root);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 8dfb8186b2c2..75a847dd776a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -209,8 +209,8 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
}
omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Enable autoidle on OMAP2 / OMAP3 */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ /* Enable autoidle on OMAP2+ */
+ if (cpu_class_is_omap2())
autoidle = 1;
/*
diff --git a/arch/arm/plat-omap/include/plat/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h
deleted file mode 100644
index 730c49d1ebd8..000000000000
--- a/arch/arm/plat-omap/include/plat/clkdev.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-static inline int __clk_get(struct clk *clk)
-{
- return 1;
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index f1899a3e4174..387a9638991b 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -39,6 +39,7 @@ struct omap_clk {
#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
+#define CK_446X (1 << 13)
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index f57e0649ab30..df4b9683f17f 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -58,10 +58,12 @@ struct clkops {
#define RATE_IN_36XX (1 << 4)
#define RATE_IN_4430 (1 << 5)
#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 8198bb6cdb5e..67b3d75884cd 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -88,6 +88,7 @@ unsigned int omap_rev(void);
* cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430
* cpu_is_omap443x(): True for OMAP4430
+ * cpu_is_omap446x(): True for OMAP4460
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@@ -123,6 +124,7 @@ IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
IS_TI_SUBCLASS(816x, 0x816)
@@ -137,6 +139,7 @@ IS_TI_SUBCLASS(816x, 0x816)
#define cpu_is_ti816x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
+#define cpu_is_omap446x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -361,8 +364,10 @@ IS_OMAP_TYPE(3517, 0x3517)
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
+# undef cpu_is_omap446x
# define cpu_is_omap44xx() is_omap44xx()
# define cpu_is_omap443x() is_omap443x()
+# define cpu_is_omap446x() is_omap446x()
# endif
/* Macros to detect if we have OMAP1 or OMAP2 */
@@ -410,6 +415,9 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP446X_CLASS 0x44600044
+#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+
/*
* omap_chip bits
*
@@ -439,13 +447,15 @@ IS_OMAP_TYPE(3517, 0x3517)
#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
#define CHIP_IS_TI816X (1 << 14)
+#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
CHIP_IS_OMAP4430ES2 | \
CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2)
+ CHIP_IS_OMAP4430ES2_2 | \
+ CHIP_IS_OMAP4460ES1_0)
/*
* "GE" here represents "greater than or equal to" in terms of ES
@@ -468,7 +478,7 @@ void omap2_check_revision(void);
/*
* Runtime detection of OMAP3 features
*/
-extern u32 omap3_features;
+extern u32 omap_features;
#define OMAP3_HAS_L2CACHE BIT(0)
#define OMAP3_HAS_IVA BIT(1)
@@ -478,11 +488,15 @@ extern u32 omap3_features;
#define OMAP3_HAS_192MHZ_CLK BIT(5)
#define OMAP3_HAS_IO_WAKEUP BIT(6)
#define OMAP3_HAS_SDRC BIT(7)
+#define OMAP4_HAS_MPU_1GHZ BIT(8)
+#define OMAP4_HAS_MPU_1_2GHZ BIT(9)
+#define OMAP4_HAS_MPU_1_5GHZ BIT(10)
+
#define OMAP3_HAS_FEATURE(feat,flag) \
static inline unsigned int omap3_has_ ##feat(void) \
{ \
- return (omap3_features & OMAP3_HAS_ ##flag); \
+ return omap_features & OMAP3_HAS_ ##flag; \
} \
OMAP3_HAS_FEATURE(l2cache, L2CACHE)
@@ -494,4 +508,19 @@ OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
OMAP3_HAS_FEATURE(sdrc, SDRC)
+/*
+ * Runtime detection of OMAP4 features
+ */
+extern u32 omap_features;
+
+#define OMAP4_HAS_FEATURE(feat, flag) \
+static inline unsigned int omap4_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP4_HAS_ ##flag; \
+} \
+
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index d1c916fcf770..dc562a5c0a8a 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -195,6 +195,11 @@
#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX 54
+#define AM35XX_DMA_UART4_RX 55
+
/*----------------------------------------------------------------------------*/
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 878d632c4092..7c22b9e10dc3 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -22,6 +22,7 @@
#define __ASM__ARCH_OMAP_I2C_H
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -46,10 +47,13 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
*/
struct omap_i2c_dev_attr {
u8 fifo_depth;
- u8 flags;
+ u32 flags;
};
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
+struct omap_hwmod;
+int omap_i2c_reset(struct omap_hwmod *oh);
+
#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c88432005665..30e10719b774 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -357,6 +357,7 @@
#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
#define INT_35XX_USBOTG_IRQ 71
+#define INT_35XX_UART4 84
#define INT_35XX_CCDC_VD0_IRQ 88
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93
@@ -407,11 +408,19 @@
#endif
#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
+#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END
+#ifdef CONFIG_TWL6040_CODEC
+#define TWL6040_CODEC_NR_IRQS 6
+#else
+#define TWL6040_CODEC_NR_IRQS 0
+#endif
+#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
+
/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END)
+#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
#define TWL_IRQ_END TWL4030_GPIO_IRQ_END
#else
-#define TWL_IRQ_END TWL6030_IRQ_END
+#define TWL_IRQ_END TWL6040_CODEC_IRQ_END
#endif
/* GPMC related */
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 2b1d9bc1eebb..9fe6c8783236 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -10,5 +10,6 @@ struct omap4_keypad_platform_data {
u8 cols;
};
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+ struct omap_board_data *);
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index ce06ac6a9709..0e329ca88a70 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -2,6 +2,7 @@
* omap_hwmod macros, structures
*
* Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -79,6 +80,11 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
#define HWMOD_IDLEMODE_SMART (1 << 2)
#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
+/* modulemode control type (SW or HW) */
+#define MODULEMODE_HWCTRL 1
+#define MODULEMODE_SWCTRL 2
+
+
/**
* struct omap_hwmod_mux_info - hwmod specific mux configuration
* @pads: array of omap_device_pad entries
@@ -360,9 +366,11 @@ struct omap_hwmod_omap2_prcm {
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
- void __iomem *clkctrl_reg;
- void __iomem *rstctrl_reg;
+ u16 clkctrl_offs;
+ u16 rstctrl_offs;
+ u16 context_offs;
u8 submodule_wkdep_bit;
+ u8 modulemode;
};
@@ -515,6 +523,8 @@ struct omap_hwmod {
const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
+ char *clkdm_name;
+ struct clockdomain *clkdm;
char *vdd_name;
struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
@@ -566,6 +576,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
+int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 2723f9166ea2..de3b10c18127 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -56,6 +56,9 @@
#define TI816X_UART2_BASE 0x48022000
#define TI816X_UART3_BASE 0x48024000
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ac4b60d9aa29..a067484cc4a2 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
DEBUG_LL_OMAP3(3, craneboard);
DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 83a37c54342f..79e7fedb8602 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -72,7 +72,7 @@ static size_t sgtable_len(const struct sg_table *sgt)
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
size_t bytes;
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
if (!iopgsz_ok(bytes)) {
pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
@@ -198,7 +198,7 @@ static void *vmap_sg(const struct sg_table *sgt)
int err;
pa = sg_phys(sg);
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
BUG_ON(bytes != PAGE_SIZE);
@@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da,
{
unsigned int i;
struct scatterlist *sg;
- void *va;
-
- va = phys_to_virt(pa);
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
unsigned bytes;
@@ -476,7 +473,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
struct iotlb_entry e;
pa = sg_phys(sg);
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
flags &= ~IOVMF_PGSZ_MASK;
pgsz = bytes_to_iopgsz(bytes);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 3c1fbdc92468..6c62af108710 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -966,6 +966,33 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
}
EXPORT_SYMBOL(omap_mcbsp_stop);
+/*
+ * The following functions are only required on an OMAP1-only build.
+ * mach-omap2/mcbsp.c contains the real functions
+ */
+#ifndef CONFIG_ARCH_OMAP2PLUS
+int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+{
+ WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
+ __func__);
+ return -EINVAL;
+}
+
+void omap2_mcbsp1_mux_clkr_src(u8 mux)
+{
+ WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
+ __func__);
+ return;
+}
+
+void omap2_mcbsp1_mux_fsr_src(u8 mux)
+{
+ WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
+ __func__);
+ return;
+}
+#endif
+
#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 3471c650743b..02609eee0562 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -236,56 +236,71 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
return 0;
}
+static void _add_clkdev(struct omap_device *od, const char *clk_alias,
+ const char *clk_name)
+{
+ struct clk *r;
+ struct clk_lookup *l;
+
+ if (!clk_alias || !clk_name)
+ return;
+
+ pr_debug("omap_device: %s: Creating %s -> %s\n",
+ dev_name(&od->pdev.dev), clk_alias, clk_name);
+
+ r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ if (!IS_ERR(r)) {
+ pr_warning("omap_device: %s: alias %s already exists\n",
+ dev_name(&od->pdev.dev), clk_alias);
+ clk_put(r);
+ return;
+ }
+
+ r = omap_clk_get_by_name(clk_name);
+ if (IS_ERR(r)) {
+ pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
+ dev_name(&od->pdev.dev), clk_name);
+ return;
+ }
+
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ if (!l) {
+ pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
+ dev_name(&od->pdev.dev), clk_alias);
+ return;
+ }
+
+ clkdev_add(l);
+}
+
/**
- * _add_optional_clock_clkdev - Add clkdev entry for hwmod optional clocks
+ * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
+ * and main clock
* @od: struct omap_device *od
+ * @oh: struct omap_hwmod *oh
*
- * For every optional clock present per hwmod per omap_device, this function
- * adds an entry in the clkdev table of the form <dev-id=dev_name, con-id=role>
- * if it does not exist already.
+ * For the main clock and every optional clock present per hwmod per
+ * omap_device, this function adds an entry in the clkdev table of the
+ * form <dev-id=dev_name, con-id=role> if it does not exist already.
*
* The function is called from inside omap_device_build_ss(), after
* omap_device_register.
*
* This allows drivers to get a pointer to its optional clocks based on its role
* by calling clk_get(<dev*>, <role>).
+ * In the case of the main clock, a "fck" alias is used.
*
* No return value.
*/
-static void _add_optional_clock_clkdev(struct omap_device *od,
- struct omap_hwmod *oh)
+static void _add_hwmod_clocks_clkdev(struct omap_device *od,
+ struct omap_hwmod *oh)
{
int i;
- for (i = 0; i < oh->opt_clks_cnt; i++) {
- struct omap_hwmod_opt_clk *oc;
- struct clk *r;
- struct clk_lookup *l;
-
- oc = &oh->opt_clks[i];
-
- if (!oc->_clk)
- continue;
-
- r = clk_get_sys(dev_name(&od->pdev.dev), oc->role);
- if (!IS_ERR(r))
- continue; /* clkdev entry exists */
+ _add_clkdev(od, "fck", oh->main_clk);
- r = omap_clk_get_by_name((char *)oc->clk);
- if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), oc->clk);
- continue;
- }
-
- l = clkdev_alloc(r, oc->role, dev_name(&od->pdev.dev));
- if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), oc->role);
- return;
- }
- clkdev_add(l);
- }
+ for (i = 0; i < oh->opt_clks_cnt; i++)
+ _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
}
@@ -492,7 +507,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
for (i = 0; i < oh_cnt; i++) {
hwmods[i]->od = od;
- _add_optional_clock_clkdev(od, hwmods[i]);
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
}
if (ret)
@@ -600,6 +615,9 @@ static int _od_resume_noirq(struct device *dev)
return pm_generic_resume_noirq(dev);
}
+#else
+#define _od_suspend_noirq NULL
+#define _od_resume_noirq NULL
#endif
static struct dev_pm_domain omap_device_pm_domain = {
@@ -607,7 +625,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
_od_runtime_idle)
USE_PLATFORM_PM_SLEEP_OPS
- SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+ .suspend_noirq = _od_suspend_noirq,
+ .resume_noirq = _od_resume_noirq,
}
};
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index e98f5c5c7879..9843c954c042 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -39,6 +39,7 @@ config S5P_GPIO_INT
config S5P_HRT
bool
+ select SAMSUNG_DEV_PWM
help
Use the High Resolution timer support
@@ -70,6 +71,16 @@ config S5P_DEV_FIMC3
help
Compile in platform device definitions for FIMC controller 3
+config S5P_DEV_FIMD0
+ bool
+ help
+ Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_MFC
+ bool
+ help
+ Compile in platform device definitions for MFC
+
config S5P_DEV_ONENAND
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index e234cc4d49a0..4b53e04eeca4 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -25,11 +25,12 @@ obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
-
+obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o
+obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o
obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 02af235298e2..5f84a3f13ef9 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk)
if (IS_ERR(pclk))
return -EINVAL;
- rate = pclk->ops->get_rate(clk);
+ rate = pclk->ops->get_rate(pclk);
clk_put(pclk);
return rate;
diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c
new file mode 100644
index 000000000000..f728bb5abcef
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimd0.c
@@ -0,0 +1,67 @@
+/* linux/arch/arm/plat-s5p/dev-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Core file for Samsung Display Controller (FIMD) driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s5p_fimd0_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMD0,
+ .end = S5P_PA_FIMD0 + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMD0_VSYNC,
+ .end = IRQ_FIMD0_VSYNC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_FIMD0_FIFO,
+ .end = IRQ_FIMD0_FIFO,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_FIMD0_SYSTEM,
+ .end = IRQ_FIMD0_SYSTEM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 fimd0_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_fimd0 = {
+ .name = "s5p-fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimd0_resource),
+ .resource = s5p_fimd0_resource,
+ .dev = {
+ .dma_mask = &fimd0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+ &s5p_device_fimd0);
+}
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c
new file mode 100644
index 000000000000..94226a0010f7
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-mfc.c
@@ -0,0 +1,123 @@
+/* linux/arch/arm/plat-s5p/dev-mfc.c
+ *
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+#include <plat/mfc.h>
+
+static struct resource s5p_mfc_resource[] = {
+ [0] = {
+ .start = S5P_PA_MFC,
+ .end = S5P_PA_MFC + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MFC,
+ .end = IRQ_MFC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s5p_device_mfc = {
+ .name = "s5p-mfc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mfc_resource),
+ .resource = s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mfc_l = {
+ .name = "s5p-mfc-l",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_mfc_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_mfc_r = {
+ .name = "s5p-mfc-r",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_mfc_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct s5p_mfc_reserved_mem {
+ phys_addr_t base;
+ unsigned long size;
+ struct device *dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize)
+{
+ int i;
+
+ s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+ s5p_mfc_mem[0].base = rbase;
+ s5p_mfc_mem[0].size = rsize;
+
+ s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+ s5p_mfc_mem[1].base = lbase;
+ s5p_mfc_mem[1].size = lsize;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (memblock_remove(area->base, area->size)) {
+ printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ area->base = 0;
+ }
+ }
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (!area->base)
+ continue;
+
+ if (dma_declare_coherent_memory(area->dev, area->base,
+ area->base, area->size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+ printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ }
+ return 0;
+}
+device_initcall(s5p_mfc_memory_init);
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index d973d39666a3..36d3551173b2 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -35,9 +35,10 @@
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
-#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100)
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
-#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
+
+#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
+#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h
new file mode 100644
index 000000000000..6697f8cb2949
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/mfc.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_S5P_MFC_H
+#define __PLAT_S5P_MFC_H
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase: base address for MFC 'right' memory interface
+ * @rsize: size of the memory reserved for MFC 'right' interface
+ * @lbase: base address for MFC 'left' memory interface
+ * @lsize: size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_S5P_MFC_H */
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 327ab9f662e8..f71078ef6bb5 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -23,6 +23,8 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
+#include <asm/mach/irq.h>
+
#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
#define CON_OFFSET 0x700
@@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
int group, pend_offset, mask_offset;
unsigned int pend, mask;
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+
for (group = 0; group < bank->nr_groups; group++) {
struct s3c_gpio_chip *chip = bank->chips[group];
if (!chip)
@@ -102,6 +107,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
pend &= ~BIT(offset);
}
}
+ chained_irq_exit(chip, desc);
}
static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index e8f2be2d67f2..ee8deef19481 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/regulator/consumer.h>
#include <plat/regs-adc.h>
#include <plat/adc.h>
@@ -39,8 +40,9 @@
*/
enum s3c_cpu_type {
- TYPE_S3C24XX,
- TYPE_S3C64XX
+ TYPE_ADCV1, /* S3C24XX */
+ TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
+ TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
};
struct s3c_adc_client {
@@ -71,6 +73,7 @@ struct adc_device {
unsigned int prescale;
int irq;
+ struct regulator *vdd;
};
static struct adc_device *adc_dev;
@@ -91,6 +94,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
struct s3c_adc_client *client)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
client->select_cb(client, 1);
@@ -98,8 +102,12 @@ static inline void s3c_adc_select(struct adc_device *adc,
con &= ~S3C2410_ADCCON_STDBM;
con &= ~S3C2410_ADCCON_STARTMASK;
- if (!client->is_ts)
- con |= S3C2410_ADCCON_SELMUX(client->channel);
+ if (!client->is_ts) {
+ if (cpu == TYPE_ADCV3)
+ writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+ else
+ con |= S3C2410_ADCCON_SELMUX(client->channel);
+ }
writel(con, adc->regs + S3C2410_ADCCON);
}
@@ -285,8 +293,8 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
client->nr_samples--;
- if (cpu == TYPE_S3C64XX) {
- /* S3C64XX ADC resolution is 12-bit */
+ if (cpu != TYPE_ADCV1) {
+ /* S3C64XX/S5P ADC resolution is 12-bit */
data0 &= 0xfff;
data1 &= 0xfff;
} else {
@@ -312,7 +320,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
}
exit:
- if (cpu == TYPE_S3C64XX) {
+ if (cpu != TYPE_ADCV1) {
/* Clear ADC interrupt */
writel(0, adc->regs + S3C64XX_ADCCLRINT);
}
@@ -338,17 +346,24 @@ static int s3c_adc_probe(struct platform_device *pdev)
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+ adc->vdd = regulator_get(dev, "vdd");
+ if (IS_ERR(adc->vdd)) {
+ dev_err(dev, "operating without regulator \"vdd\" .\n");
+ ret = PTR_ERR(adc->vdd);
+ goto err_alloc;
+ }
+
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
dev_err(dev, "failed to get adc irq\n");
ret = -ENOENT;
- goto err_alloc;
+ goto err_reg;
}
ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
if (ret < 0) {
dev_err(dev, "failed to attach adc irq\n");
- goto err_alloc;
+ goto err_reg;
}
adc->clk = clk_get(dev, "adc");
@@ -372,10 +387,14 @@ static int s3c_adc_probe(struct platform_device *pdev)
goto err_clk;
}
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ goto err_ioremap;
+
clk_enable(adc->clk);
tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
- if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+ if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
/* Enable 12-bit ADC resolution */
tmp |= S3C64XX_ADCCON_RESSEL;
}
@@ -388,12 +407,15 @@ static int s3c_adc_probe(struct platform_device *pdev)
return 0;
+ err_ioremap:
+ iounmap(adc->regs);
err_clk:
clk_put(adc->clk);
err_irq:
free_irq(adc->irq, adc);
-
+ err_reg:
+ regulator_put(adc->vdd);
err_alloc:
kfree(adc);
return ret;
@@ -406,6 +428,8 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev)
iounmap(adc->regs);
free_irq(adc->irq, adc);
clk_disable(adc->clk);
+ regulator_disable(adc->vdd);
+ regulator_put(adc->vdd);
clk_put(adc->clk);
kfree(adc);
@@ -413,8 +437,10 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+static int s3c_adc_suspend(struct device *dev)
{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
struct adc_device *adc = platform_get_drvdata(pdev);
unsigned long flags;
u32 con;
@@ -428,19 +454,30 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
disable_irq(adc->irq);
spin_unlock_irqrestore(&adc->lock, flags);
clk_disable(adc->clk);
+ regulator_disable(adc->vdd);
return 0;
}
-static int s3c_adc_resume(struct platform_device *pdev)
+static int s3c_adc_resume(struct device *dev)
{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
struct adc_device *adc = platform_get_drvdata(pdev);
+ int ret;
+ unsigned long tmp;
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ return ret;
clk_enable(adc->clk);
enable_irq(adc->irq);
- writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
- adc->regs + S3C2410_ADCCON);
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+ /* Enable 12-bit ADC resolution */
+ if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+ tmp |= S3C64XX_ADCCON_RESSEL;
+ writel(tmp, adc->regs + S3C2410_ADCCON);
return 0;
}
@@ -453,25 +490,32 @@ static int s3c_adc_resume(struct platform_device *pdev)
static struct platform_device_id s3c_adc_driver_ids[] = {
{
.name = "s3c24xx-adc",
- .driver_data = TYPE_S3C24XX,
+ .driver_data = TYPE_ADCV1,
}, {
.name = "s3c64xx-adc",
- .driver_data = TYPE_S3C64XX,
+ .driver_data = TYPE_ADCV2,
+ }, {
+ .name = "samsung-adc-v3",
+ .driver_data = TYPE_ADCV3,
},
{ }
};
MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+static const struct dev_pm_ops adc_pm_ops = {
+ .suspend = s3c_adc_suspend,
+ .resume = s3c_adc_resume,
+};
+
static struct platform_driver s3c_adc_driver = {
.id_table = s3c_adc_driver_ids,
.driver = {
.name = "s3c-adc",
.owner = THIS_MODULE,
+ .pm = &adc_pm_ops,
},
.probe = s3c_adc_probe,
.remove = __devexit_p(s3c_adc_remove),
- .suspend = s3c_adc_suspend,
- .resume = s3c_adc_resume,
};
static int __init adc_init(void)
@@ -485,4 +529,4 @@ static int __init adc_init(void)
return ret;
}
-arch_initcall(adc_init);
+module_init(adc_init);
diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c
index a068c4f42d56..97e35d3c064d 100644
--- a/arch/arm/plat-samsung/dev-asocdma.c
+++ b/arch/arm/plat-samsung/dev-asocdma.c
@@ -23,3 +23,13 @@ struct platform_device samsung_asoc_dma = {
}
};
EXPORT_SYMBOL(samsung_asoc_dma);
+
+struct platform_device samsung_asoc_idma = {
+ .name = "samsung-idma",
+ .id = -1,
+ .dev = {
+ .dma_mask = &audio_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+EXPORT_SYMBOL(samsung_asoc_idma);
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index a0826ed2f9fe..aa9875f77c40 100644
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -44,6 +44,7 @@ struct samsung_i2s {
* Also corresponds to clocks of I2SMOD[10]
*/
const char **src_clk;
+ dma_addr_t idma_addr;
};
/**
diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h
index 51d8da846a62..ad530c78fe8c 100644
--- a/arch/arm/plat-samsung/include/plat/backlight.h
+++ b/arch/arm/plat-samsung/include/plat/backlight.h
@@ -20,7 +20,7 @@ struct samsung_bl_gpio_info {
int func;
};
-extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data);
#endif /* __ASM_PLAT_BACKLIGHT_H */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index e3b31c26ac3e..24ebb1e1de41 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -40,6 +40,7 @@ extern struct platform_device s3c64xx_device_spi0;
extern struct platform_device s3c64xx_device_spi1;
extern struct platform_device samsung_asoc_dma;
+extern struct platform_device samsung_asoc_idma;
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
@@ -49,6 +50,7 @@ extern struct platform_device s3c64xx_device_ac97;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_fb;
+extern struct platform_device s5p_device_fimd0;
extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
@@ -112,6 +114,7 @@ extern struct platform_device exynos4_device_i2s2;
extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_ahci;
+extern struct platform_device exynos4_device_dwmci;
extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
@@ -136,6 +139,9 @@ extern struct platform_device s5p_device_fimc1;
extern struct platform_device s5p_device_fimc2;
extern struct platform_device s5p_device_fimc3;
+extern struct platform_device s5p_device_mfc;
+extern struct platform_device s5p_device_mfc_l;
+extern struct platform_device s5p_device_mfc_r;
extern struct platform_device s5p_device_mipi_csis0;
extern struct platform_device s5p_device_mipi_csis1;
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
index bca383efcf6d..6abcbf139cee 100644
--- a/arch/arm/plat-samsung/include/plat/fb-core.h
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -26,4 +26,19 @@ static inline void s3c_fb_setname(char *name)
#endif
}
+/* Re-define device name depending on support. */
+static inline void s5p_fb_setname(int id, char *name)
+{
+ switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMD0
+ case 0:
+ s5p_device_fimd0.name = name;
+ break;
+#endif
+ default:
+ printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
+ break;
+ }
+}
+
#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index cb3ca3adc685..01f10e4d00c7 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -74,6 +74,14 @@ struct s3c_fb_platdata {
extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
/**
+ * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ * so the machine data can mark the data __initdata so that any unused
+ * machines will end up dumping their data at runtime.
+ */
+extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
* s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
*
* Initialise the GPIO for an 24bpp LCD display on the RGB interface.
@@ -94,4 +102,11 @@ extern void s5pc100_fb_gpio_setup_24bpp(void);
*/
extern void s5pv210_fb_gpio_setup_24bpp(void);
+/**
+ * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
+ */
+extern void exynos4_fimd0_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index 7554c4fcddb9..035e8c38d69c 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -21,6 +21,7 @@
#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
+#define S5P_ADCMUX S3C2410_ADCREG(0x1C)
#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
index 657405c481d0..3014c7226bd1 100644
--- a/arch/arm/plat-samsung/irq-uart.c
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -19,6 +19,8 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <asm/mach/irq.h>
+
#include <mach/map.h>
#include <plat/irq-uart.h>
#include <plat/regs-serial.h>
@@ -30,9 +32,12 @@
static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
{
struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
+ struct irq_chip *chip = irq_get_chip(irq);
u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
int base = uirq->base_irq;
+ chained_irq_enter(chip, desc);
+
if (pend & (1 << 0))
generic_handle_irq(base);
if (pend & (1 << 1))
@@ -41,6 +46,8 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
generic_handle_irq(base + 2);
if (pend & (1 << 3))
generic_handle_irq(base + 3);
+
+ chained_irq_exit(chip, desc);
}
static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index f714d060370d..51583cd30164 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -22,9 +22,14 @@
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
+#include <asm/mach/irq.h>
+
static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
generic_handle_irq((int)desc->irq_data.handler_data);
+ chained_irq_exit(chip, desc);
}
/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 5fa1742d019b..ae6f99834cdd 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -269,6 +269,7 @@ static int s3c_pm_enter(suspend_state_t state)
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
+ s3c_pm_saved_gpios();
s3c_pm_save_uarts();
s3c_pm_save_core();
@@ -306,6 +307,7 @@ static int s3c_pm_enter(suspend_state_t state)
s3c_pm_restore_core();
s3c_pm_restore_uarts();
s3c_pm_restore_gpios();
+ s3c_pm_restored_gpios();
s3c_pm_debug_init();
diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h
deleted file mode 100644
index a2d0112fcaf7..000000000000
--- a/arch/arm/plat-spear/include/plat/clkdev.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clkdev.h
- *
- * Clock Dev framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLKDEV_H
-#define __PLAT_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif /* __PLAT_CLKDEV_H */
diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h
deleted file mode 100644
index 04b37a89801c..000000000000
--- a/arch/arm/plat-tcc/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 3b3776d0a1a7..62cc8f981171 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944
nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955
omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967
cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
-eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975
acs5k MACH_ACS5K ACS5K 1982
snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987
dsm320 MACH_DSM320 DSM320 1988
@@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776
omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
ti8168evm MACH_TI8168EVM TI8168EVM 2800
teton_bga MACH_TETON_BGA TETON_BGA 2816
-eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820
-eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821
+eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820
+eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821
eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
smdkc210 MACH_SMDKC210 SMDKC210 2838
@@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280
uemd MACH_UEMD UEMD 3281
ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282
rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283
-nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284
+encore MACH_ENCORE ENCORE 3284
hkdkc100 MACH_HKDKC100 HKDKC100 3285
ts42xx MACH_TS42XX TS42XX 3286
aebl MACH_AEBL AEBL 3287