1213 files changed, 58950 insertions, 46515 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d1f5704a284..214b698cefea 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,20 +3,23 @@ config ARM
 	default y
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT if MMU
+	select CLONE_BACKWARDS
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
@@ -25,6 +28,7 @@ config ARM
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
+	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
@@ -35,7 +39,6 @@ config ARM
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
@@ -47,22 +50,25 @@ config ARM
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_MEMBLOCK
+	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
+	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
 	select KTIME_SCALAR
+	select MODULES_USE_ELF_REL
+	select OLD_SIGACTION
+	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
-	select MODULES_USE_ELF_REL
-	select CLONE_BACKWARDS
-	select OLD_SIGSUSPEND3
-	select OLD_SIGACTION
-	select HAVE_CONTEXT_TRACKING
+	# Above selects are sorted alphabetically; please add new ones
+	# according to that.  Thanks.
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -316,6 +322,7 @@ config ARCH_INTEGRATOR
 	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select SPARSE_IRQ
+	select USE_OF
 	select VERSATILE_FPGA_IRQ
 	help
 	  Support for ARM's Integrator platform.
@@ -357,7 +364,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select HAVE_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
@@ -371,7 +377,6 @@ config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
@@ -385,9 +390,9 @@ config ARCH_CLPS711X
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_GPIO_H
+	select CLKSRC_MMIO
 	select CPU_FA526
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -442,7 +447,6 @@ config ARCH_NETX
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select ARCH_SUPPORTS_MSI
 	select CPU_XSC3
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
@@ -457,7 +461,7 @@ config ARCH_IOP32X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_GPIO_H
+	select GPIO_IOP
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -470,7 +474,7 @@ config ARCH_IOP33X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_GPIO_H
+	select GPIO_IOP
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -481,6 +485,7 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE
@@ -488,8 +493,8 @@ config ARCH_IXP4XX
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -499,11 +504,11 @@ config ARCH_DOVE
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
 	select USB_ARCH_HAS_EHCI
-	select MVEBU_MBUS
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -513,12 +518,12 @@ config ARCH_KIRKWOOD
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PCI_QUIRKS
 	select PINCTRL
 	select PINCTRL_KIRKWOOD
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -528,9 +533,9 @@ config ARCH_MV78XX0
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -541,9 +546,9 @@ config ARCH_ORION5X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -558,7 +563,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
-	select NEED_MACH_GPIO_H
+	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -621,7 +626,6 @@ config ARCH_PXA
 	select GPIO_PXA
 	select HAVE_IDE
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
@@ -630,7 +634,7 @@ config ARCH_PXA
 config ARCH_MSM
 	bool "Qualcomm MSM"
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
+	select CLKSRC_OF if OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	help
@@ -646,8 +650,7 @@ config ARCH_SHMOBILE
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -690,7 +693,6 @@ config ARCH_SA1100
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
 	select ISA
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -701,10 +703,9 @@ config ARCH_S3C24XX
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -724,23 +725,23 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
 	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
-	select SAMSUNG_CLKSRC
 	select SAMSUNG_GPIOLIB_4BIT
-	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
 	select USB_ARCH_HAS_OHCI
 	help
@@ -749,17 +750,16 @@ config ARCH_S3C64XX
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
-	select SAMSUNG_WDT_RESET
 	select SAMSUNG_ATAGS
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -768,17 +768,16 @@ config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
-	select SAMSUNG_WDT_RESET
 	select SAMSUNG_ATAGS
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5PC100 series based systems
 
@@ -788,11 +787,10 @@ config ARCH_S5PV210
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -809,11 +807,9 @@ config ARCH_EXYNOS
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -823,20 +819,6 @@ config ARCH_EXYNOS
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
-config ARCH_SHARK
-	bool "Shark"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select ISA_DMA
-	select NEED_MACH_MEMORY_H
-	select PCI
-	select VIRT_TO_BUS
-	select ZONE_DMA
-	help
-	  Support for the StrongARM based Digital DNARD machine, also known
-	  as "Shark" (<http://www.shark-linux.de/shark.html>).
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -846,7 +828,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
@@ -864,7 +845,6 @@ config ARCH_OMAP1
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
@@ -1008,9 +988,7 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
 
-if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
-endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
@@ -1090,11 +1068,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config XSCALE_PMU
-	bool
-	depends on CPU_XSCALE
-	default y
-
 config MULTI_IRQ_HANDLER
 	bool
 	help
@@ -1430,12 +1403,6 @@ config PCI_NANOENGINE
 config PCI_SYSCALL
 	def_bool PCI
 
-# Select the host bridge type
-config PCI_HOST_VIA82C505
-	bool
-	depends on PCI && ARCH_SHARK
-	default y
-
 config PCI_HOST_ITE8152
 	bool
 	depends on PCI && MACH_ARMCORE
@@ -1466,7 +1433,6 @@ config SMP
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1548,6 +1514,32 @@ config MCPM
 	  for (multi-)cluster based systems, such as big.LITTLE based
 	  systems.
 
+config BIG_LITTLE
+	bool "big.LITTLE support (Experimental)"
+	depends on CPU_V7 && SMP
+	select MCPM
+	help
+	  This option enables support selections for the big.LITTLE
+	  system architecture.
+
+config BL_SWITCHER
+	bool "big.LITTLE switcher support"
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
+	select CPU_PM
+	select ARM_CPU_SUSPEND
+	help
+	  The big.LITTLE "switcher" provides the core functionality to
+	  transparently handle transition between a cluster of A15's
+	  and a cluster of A7's in a big.LITTLE system.
+
+config BL_SWITCHER_DUMMY_IF
+	tristate "Simple big.LITTLE switcher user interface"
+	depends on BL_SWITCHER && DEBUG_KERNEL
+	help
+	  This is a simple and dummy char dev interface to control
+	  the big.LITTLE switcher core code.  It is meant for
+	  debugging purposes only.
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -1594,23 +1586,13 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-config LOCAL_TIMERS
-	bool "Use local timer interrupts"
-	depends on SMP
-	default y
-	help
-	  Enable support for local timers on SMP platforms, rather then the
-	  legacy IPI broadcast method.  Local timers allows the system
-	  accounting to be spread across the timer interval, preventing a
-	  "thundering herd" at every timer tick.
-
 # The GPIO number here must be sorted by descending number. In case of
 # a multiplatform kernel, we just want the highest value required by the
 # selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI
@@ -1629,9 +1611,10 @@ config HZ_FIXED
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
+	default 0
 
 choice
-	depends on !HZ_FIXED
+	depends on HZ_FIXED = 0
 	prompt "Timer frequency"
 
 config HZ_100
@@ -1656,7 +1639,7 @@ endchoice
 
 config HZ
 	int
-	default HZ_FIXED if HZ_FIXED
+	default HZ_FIXED if HZ_FIXED != 0
 	default 100 if HZ_100
 	default 200 if HZ_200
 	default 250 if HZ_250
@@ -1880,6 +1863,12 @@ config CC_STACKPROTECTOR
 	  neutralized via a kernel panic.
 	  This feature requires gcc version 4.2 or above.
 
+config SWIOTLB
+	def_bool y
+
+config IOMMU_HELPER
+	def_bool SWIOTLB
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
@@ -1890,6 +1879,7 @@ config XEN
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
 	select ARM_PSCI
+	select SWIOTLB_XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
@@ -2225,8 +2215,7 @@ config NEON
 
 config KERNEL_MODE_NEON
 	bool "Support for NEON in kernel mode"
-	default n
-	depends on NEON
+	depends on NEON && AEABI
 	help
 	  Say Y to include support for NEON in kernel mode.
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4137529850cb..5765abf5ce84 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -318,6 +318,7 @@ choice
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the first serial port on MSM devices.
@@ -325,6 +326,7 @@ choice
 	config DEBUG_MSM_UART2
 		bool "Kernel low-level debugging messages via MSM UART2"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on MSM devices.
@@ -332,6 +334,7 @@ choice
 	config DEBUG_MSM_UART3
 		bool "Kernel low-level debugging messages via MSM UART3"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the third serial port on MSM devices.
@@ -340,6 +343,7 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8660 UART"
 		depends on ARCH_MSM8X60
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8660 devices.
@@ -348,10 +352,20 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8960 UART"
 		depends on ARCH_MSM8960
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MSM8974_UART
+		bool "Kernel low-level debugging messages via MSM 8974 UART"
+		depends on ARCH_MSM8974
+		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8974 devices.
+
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
 		depends on ARCH_MVEBU
@@ -386,6 +400,13 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
@@ -834,6 +855,20 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
+	config DEBUG_LL_UART_EFM32
+		bool "Kernel low-level debugging via efm32 UART"
+		depends on ARCH_EFM32
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on efm32 based
+		  machines. Use the following addresses for DEBUG_UART_PHYS:
+
+		    0x4000c000 | USART0
+		    0x4000c400 | USART1
+		    0x4000c800 | USART2
+		    0x4000e000 | UART0
+		    0x4000e400 | UART1
+
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -880,11 +915,16 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_MSM_UART
+	bool
+	depends on ARCH_MSM
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
+	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -895,12 +935,14 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART
+	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
+	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
@@ -946,6 +988,7 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
@@ -976,6 +1019,7 @@ config DEBUG_UART_PHYS
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X
 
 config DEBUG_UART_VIRT
@@ -1056,7 +1100,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@@ -1072,7 +1116,7 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6fd2ceae305a..c99b1086d83d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -16,6 +16,7 @@ LDFLAGS		:=
 LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
+LDFLAGS_MODULE	+= --be8
 endif
 
 OBJCOPYFLAGS	:=-O binary -R .comment -S
@@ -188,8 +189,8 @@ machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
@@ -295,10 +296,15 @@ archprepare:
 # Convert bzImage to zImage
 bzImage: zImage
 
-zImage Image xipImage bootpImage uImage: vmlinux
+BOOT_TARGETS	= zImage Image xipImage bootpImage uImage
+INSTALL_TARGETS	= zinstall uinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-zinstall uinstall install: vmlinux
+$(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 %.dtb: | scripts
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 84aa2caf07ed..ec2f8065f955 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -95,24 +95,24 @@ initrd:
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
 zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
 i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7ac1610252ba..e7190bb5998e 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
 OBJS		+= ll_char_wr.o font.o
 endif
 
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS		+= head-shark.o ofw-shark.o
-endif
-
 ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
deleted file mode 100644
index 92b56897ed64..000000000000
--- a/arch/arm/boot/compressed/head-shark.S
+++ /dev/null
@@ -1,140 +0,0 @@
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- *   is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- *   C-parts (misc.c) are executed. This address must be known at compile-time,
- *   but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-	
-		.section	".start", "ax"
-
-		.arch armv4
-		b	__beginning
-	
-__ofw_data:	.long	0				@ the number of memory blocks
-		.space  128				@ (startaddr,size) ...
-		.space  128				@ bootargs
-		.align
-
-__beginning:	mov	r4, r0				@ save the entry to the firmware
-
-		mov	r0, #0xC0			@ disable irq and fiq
-		mov	r1, r0
-		mrs	r3, cpsr
-		bic	r2, r3, r0
-		eor	r2, r2, r1
-		msr	cpsr_c, r2
-
-		mov	r0, r4				@ get the Memory layout from firmware
-		adr	r1, __ofw_data
-		add	r2, r1, #4
-		mov	lr, pc
-		b	ofw_init
-		mov	r1, #0
-
-		adr	r2, __mmu_off			@ calculate physical address
-		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
-		adr	r0, __ofw_data
-		ldr	r0, [r0, #4]
-		add	r2, r2, r0
-		add	r2, r2, #0x00500000
-
-		mrc	p15, 0, r3, c1, c0
-		bic	r3, r3, #0xC			@ Write Buffer and DCache
-		bic	r3, r3, #0x1000			@ ICache
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
-		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
-
-		bic	r3, r3, #0x1			@ MMU
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	pc, r2
-
-__copy_target:	.long	0x08507FFC
-__copy_end:	.long	0x08607FFC
-		
-		.word	_start
-		.word	__bss_start
-
-		.align
-__temp_stack:	.space 128
-
-__mmu_off:
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		orr	r0, r0, #0x00600000
-		sub	r0, r0, #4
-	
-		ldr	r1, __copy_end
-		ldr	r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
-		mov	r4, #3				@ How many megabytes to copy
-
-
-__MoveCode:	sub	r4, r4, #1
-	
-__Copy:		ldr	r2, [r0], #-4
-		str	r2, [r1], #-4
-		teq	r1, r3
-		bne	__Copy
-
-		/* The firmware maps us in blocks of 1 MB, the next block is
-		   _below_ the last one. So our decrementing source pointer
-		   ist right here, but the destination pointer must be increased
-		   by 2 MB */
-		add	r1, r1, #0x00200000
-		add	r3, r3, #0x00100000
-
-		teq	r4, #0
-		bne	__MoveCode
-
-
-		/* and jump to it */
-		adr	r2, __go_on			@ where we want to jump
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
-		sub	r2, r2, #0x00500000		@ -0050
-		ldr	r0, __copy_target		@ and add 0850 8000 instead
-		add	r0, r0, #4
-		add	r2, r2, r0
-		mov	pc, r2				@ and jump there
-
-__go_on:
-		adr	sp, __temp_stack
-		add	sp, sp, #128
-		adr	r0, __ofw_data
-		mov	lr, pc
-		b	create_params
-	
-		mov	r8, #0
-		mov	r7, #15
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index e2d636336b7c..e7f80928949c 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -55,12 +55,47 @@ __tmp_stack:
 __continue:
 #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
-	/* Set board ID necessary for boot */
-	ldr	r7, 1f				@ Set machine type register
-	mov	r8, #0				@ pass null pointer as atag
+	adr	r0, dtb_info
+	ldmia	r0, {r1, r3, r4, r5, r7}
+
+	sub	r0, r0, r1		@ calculate the delta offset
+	add	r5, r5, r0		@ _edata
+
+	ldr	lr, [r5, #0]		@ check if valid DTB is present
+	cmp	lr, r3
+	bne	0f
+
+	add	r9, r7, #31		@ rounded up to a multiple
+	bic	r9, r9, #31		@ ... of 32 bytes
+
+	add	r6, r9, r5		@ copy from _edata
+	add	r9, r9, r4		@ to MEMORY_START
+
+1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
+	cmp	r6, r5
+	stmdb	r9!, {r0 - r3, r10 - r12, lr}
+	bhi	1b
+
+	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
+	mov	r7, #0
+	mov	r8, r4
 	b	2f
 
-1 :	.long MACH_TYPE
+	.align	2
+dtb_info:
+	.word	dtb_info
+#ifndef __ARMEB__
+	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
+#else
+	.word	0xd00dfeed
+#endif
+	.word	MEMORY_START
+	.word	_edata
+	.word	0x4000			@ maximum DTB size
+0:
+	/* Failure: Zero board ID, NULL atag/dtb */
+	mov 	r7, #0
+	mov	r8, #0			@ pass null pointer as atag
 2 :
 
 #endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 75189f13cf54..066b03480b63 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -135,6 +135,7 @@ start:
 		.word	_edata			@ zImage end address
  THUMB(		.thumb			)
 1:
+ ARM_BE8(	setend	be )			@ go BE8 if compiled for BE8
 		mrs	r9, cpsr
 #ifdef CONFIG_ARM_VIRT_EXT
 		bl	__hyp_stub_install	@ get into SVC mode, reversibly
@@ -699,9 +700,7 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -728,9 +727,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
 						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
deleted file mode 100644
index 465c54b6b128..000000000000
--- a/arch/arm/boot/compressed/ofw-shark.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
-	/* Is there a better address? Also change in mach-shark/core.c */
-	struct tag *tag = (struct tag *) 0x08003000;
-	int j,i,m,k,nr_banks,size;
-	unsigned char *c;
-
-	k = 0;
-
-	/* Head of the taglist */
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = 1;
-	tag->u.core.pagesize = PAGE_SIZE;
-	tag->u.core.rootdev = 0;
-
-	/* Build up one tagged block for each memory region */
-	size=0;
-	nr_banks=(unsigned int) buffer[0];
-	for (j=0;j<nr_banks;j++){
-		/* search the lowest address and put it into the next entry   */
-		/* not a fast sort algorithm, but there are at most 8 entries */
-		/* and this is used only once anyway                          */
-		m=0xffffffff;
-		for (i=0;i<(unsigned int) buffer[0];i++){
-			if (buffer[2*i+1]<m) {
-				m=buffer[2*i+1];
-				k=i;
-			}
-		}
-	  
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = buffer[2*k+2];
-		tag->u.mem.start = buffer[2*k+1];
-
-		size += buffer[2*k+2];
-
-		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
-	}
-	
-	/* The command line */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	
-	c=(unsigned char *)(&buffer[34]);
-	j=0;
-	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
-	tag->u.cmdline.cmdline[j]=0;
-	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
-	/* Hardware revision */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
-	/* End of the taglist */
-	tag = tag_next(tag);
-	tag->hdr.tag = 0;
-	tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
-	unsigned int i = *p++ << 8;
-	i = (i + *p++) << 8;
-	i = (i + *p++) << 8;
-	return (i + *p);
-}
-  
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='f';
-	service[1]='i';
-	service[2]='n';
-	service[3]='d';
-	service[4]='d';
-	service[5]='e';
-	service[6]='v';
-	service[7]='i';
-	service[8]='c';
-	service[9]='e';
-	service[10]='\0';
-
-	args[0]=(unsigned int)service;
-	args[1]=1;
-	args[2]=1;
-	args[3]=(unsigned int)name;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='l';
-	service[8]='e';
-	service[9]='n';
-	service[10]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 2;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[5];
-}
-  
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
-	unsigned int args[8];
-	char service[8];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 4;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-	args[5] = (unsigned int)buf;
-	args[6] = buflen;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[7];
-}
-  
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
-	int phandle,i,mem_len,buffer[32];
-	char temp[15];
-  
-	temp[0]='/';
-	temp[1]='m';
-	temp[2]='e';
-	temp[3]='m';
-	temp[4]='o';
-	temp[5]='r';
-	temp[6]='y';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='r';
-	temp[1]='e';
-	temp[2]='g';
-	temp[3]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	*nomr=mem_len >> 3;
-
-	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
-	temp[0]='/';
-	temp[1]='c';
-	temp[2]='h';
-	temp[3]='o';
-	temp[4]='s';
-	temp[5]='e';
-	temp[6]='n';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='b';
-	temp[1]='o';
-	temp[2]='o';
-	temp[3]='t';
-	temp[4]='a';
-	temp[5]='r';
-	temp[6]='g';
-	temp[7]='s';
-	temp[8]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	if (mem_len > 128) mem_len=128;
-	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
-	pointer[i+33]=0;
-
-	temp[0]='/';
-	temp[1]='\0';
-	phandle=OF_finddevice(o,temp);
-	temp[0]='b';
-	temp[1]='a';
-	temp[2]='n';
-	temp[3]='n';
-	temp[4]='e';
-	temp[5]='r';
-	temp[6]='-';
-	temp[7]='n';
-	temp[8]='a';
-	temp[9]='m';
-	temp[10]='e';
-	temp[11]='\0';
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9a7028..d57c1a65b24f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -40,26 +40,31 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
-
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
+	bcm28155-ap.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
 	exynos4412-odroidx.dtb \
-	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos4412-trats2.dtb \
 	exynos5250-arndale.dtb \
-	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
@@ -83,26 +88,33 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \
 	kirkwood-ns2.dtb \
 	kirkwood-ns2lite.dtb \
 	kirkwood-ns2max.dtb \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-openblocks_a6.dtb
+	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
-	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
+	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \
@@ -112,6 +124,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-som.dtb \
 	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-som.dtb \
+	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
@@ -131,7 +145,10 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-udoo.dtb \
+	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
@@ -143,8 +160,11 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
 	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
 	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
@@ -158,9 +178,15 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
+	omap3-evm-37xx.dtb \
+	omap3-n900.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
 	omap3-tobi.dtb \
+	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \
+	omap3-zoom3.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -171,28 +197,45 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-nano.dtb \
+	am335x-base0033.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb
+	am43x-epos-evm.dtb \
+	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
-	hrefprev60.dtb \
-	hrefv60plus.dtb \
-	ccu8540.dtb \
-	ccu9540.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+	s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
+	r8a7778-bockw-reference.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
+	r8a7779-marzen.dtb \
 	r8a7779-marzen-reference.dtb \
+	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
+	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
 	r8a73a4-ape6evm.dtb \
+	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb
+dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_sockit.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
@@ -206,11 +249,16 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2020.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a13-olinuxino.dtb
+	sun5i-a13-olinuxino.dtb \
+	sun6i-a31-colombus.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
@@ -225,7 +273,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
-	tegra114-pluto.dtb
+	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
new file mode 100644
index 000000000000..b4f95c2bbf74
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -0,0 +1,16 @@
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
new file mode 100644
index 000000000000..e3f27ec31718
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -0,0 +1,299 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index d318987d44a1..94ee427a6db1 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -8,258 +8,22 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
 
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@24 {
-				reg = <0x24>;
-			};
-
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
 };
 
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-
+&sham {
+	status = "okay";
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
+&aes {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
new file mode 100644
index 000000000000..6b71ad95a5cf
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	ti,vcc-aux-disable-is-sleep;
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+/ {
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e8ec8756e498..7e6c64ed966d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -24,324 +24,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-		matrix_keypad_s0: matrix_keypad_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-			>;
-		};
-
-		volume_keys_s0: volume_keys_s0 {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-				0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		i2c1_pins: pinmux_i2c1_pins {
-			pinctrl-single,pins = <
-				0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-				0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		nandflash_pins_s0: nandflash_pins_s0 {
-			pinctrl-single,pins = <
-				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c1: i2c@4802a000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins>;
-
-			status = "okay";
-			clock-frequency = <100000>;
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-
-			tsl2550: tsl2550@39 {
-				compatible = "taos,tsl2550";
-				reg = <0x39>;
-			};
-
-			tmp275: tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-		elm: elm@48080000 {
-			status = "okay";
-		};
-
-		epwmss0: epwmss@48300000 {
-			status = "okay";
-
-			ecap0: ecap@48300100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap0_pins>;
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nandflash_pins_s0>;
-			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-			nand@0,0 {
-				reg = <0 0 0>; /* CS0, offset 0 */
-				nand-bus-width = <8>;
-				ti,nand-ecc-opt = "bch8";
-				gpmc,device-nand = "true";
-				gpmc,device-width = <1>;
-				gpmc,sync-clk-ps = <0>;
-				gpmc,cs-on-ns = <0>;
-				gpmc,cs-rd-off-ns = <44>;
-				gpmc,cs-wr-off-ns = <44>;
-				gpmc,adv-on-ns = <6>;
-				gpmc,adv-rd-off-ns = <34>;
-				gpmc,adv-wr-off-ns = <44>;
-				gpmc,we-on-ns = <0>;
-				gpmc,we-off-ns = <40>;
-				gpmc,oe-on-ns = <0>;
-				gpmc,oe-off-ns = <54>;
-				gpmc,access-ns = <64>;
-				gpmc,rd-cycle-ns = <82>;
-				gpmc,wr-cycle-ns = <82>;
-				gpmc,wait-on-read = "true";
-				gpmc,wait-on-write = "true";
-				gpmc,bus-turnaround-ns = <0>;
-				gpmc,cycle2cycle-delay-ns = <0>;
-				gpmc,clk-activation-ns = <0>;
-				gpmc,wait-monitoring-ns = <0>;
-				gpmc,wr-access-ns = <40>;
-				gpmc,wr-data-mux-bus-ns = <0>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				elm_id = <&elm>;
-
-				/* MTD partition table */
-				partition@0 {
-					label = "SPL1";
-					reg = <0x00000000 0x000020000>;
-				};
-
-				partition@1 {
-					label = "SPL2";
-					reg = <0x00020000 0x00020000>;
-				};
-
-				partition@2 {
-					label = "SPL3";
-					reg = <0x00040000 0x00020000>;
-				};
-
-				partition@3 {
-					label = "SPL4";
-					reg = <0x00060000 0x00020000>;
-				};
-
-				partition@4 {
-					label = "U-boot";
-					reg = <0x00080000 0x001e0000>;
-				};
-
-				partition@5 {
-					label = "environment";
-					reg = <0x00260000 0x00020000>;
-				};
-
-				partition@6 {
-					label = "Kernel";
-					reg = <0x00280000 0x00500000>;
-				};
-
-				partition@7 {
-					label = "File-System";
-					reg = <0x00780000 0x0F880000>;
-				};
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -403,10 +85,447 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+		>;
+	};
+
+	am335x_evm_audio_pins: am335x_evm_audio_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL1";
+			reg = <0x00000000 0x000020000>;
+		};
+
+		partition@1 {
+			label = "SPL2";
+			reg = <0x00020000 0x00020000>;
+		};
+
+		partition@2 {
+			label = "SPL3";
+			reg = <0x00040000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "SPL4";
+			reg = <0x00060000 0x00020000>;
+		};
+
+		partition@4 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@5 {
+			label = "environment";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@6 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@7 {
+			label = "File-System";
+			reg = <0x00780000 0x0F880000>;
+		};
+	};
 };
 
 #include "tps65910.dtsi"
 
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&am335x_evm_audio_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
+
 &tps {
 	vcc1-supply = <&vbat>;
 	vcc2-supply = <&vbat>;
@@ -477,6 +596,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -509,7 +630,7 @@
 	tsc {
 		ti,wires = <4>;
 		ti,x-plate-resistance = <200>;
-		ti,coordiante-readouts = <5>;
+		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
 	};
 
@@ -517,3 +638,17 @@
 		ti,adc-channels = <4 5 6 7>;
 	};
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4f339fa91c57..4718ec4a4dbf 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -31,210 +31,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-				0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-				0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-				0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-			>;
-		};
-
-		gpio_keys_s0: gpio_keys_s0 {
-			pinctrl-single,pins = <
-				0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-				0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-				0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-				0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		ecap2_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-				/* Slave 2 */
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-				0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-				0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-				0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-				/* Slave 2 reset value*/
-				0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			status = "okay";
-
-			ecap2: ecap@48304100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap2_pins>;
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -319,6 +115,240 @@
 		brightness-levels = <0 58 61 66 75 90 125 170 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVMSK";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24576000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@48304100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
 };
 
 #include "tps65910.dtsi"
@@ -393,6 +423,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -419,3 +451,47 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii-txid";
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
new file mode 100644
index 000000000000..619624479311
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -0,0 +1,278 @@
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 000000000000..9907b494b99c
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Newflow AM335x NanoBone";
+	compatible = "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "nanobone:green:usr1";
+			gpios = <&gpio1 5 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&misc_pins>;
+
+	misc_pins: misc_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+		>;
+	};
+
+	gpmc_pins: gpmc_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	uart4_pins: uart4_pins {
+		pinctrl-single,pins = <
+			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+		>;
+	};
+
+	uart5_pins: uart5_pins {
+		pinctrl-single,pins = <
+			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	gpio@20 {
+		compatible = "mcp,mcp23017";
+		reg = <0x20>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom@53 {
+		compatible = "mcp,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	compatible = "ti,am3352-gpmc";
+	ti,hwmods = "gpmc";
+	status = "okay";
+	gpmc,num-waitpins = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
+
+	nor@0,0 {
+		reg = <0 0x00000000 0x08000000>;
+		compatible = "cfi-flash";
+		linux,mtd-name = "spansion,s29gl010p11t";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,oe-on-ns = <40>;
+		gpmc,oe-off-ns = <160>;
+		gpmc,we-on-ns = <40>;
+		gpmc,we-off-ns = <160>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wr-data-mux-bus-ns = <70>;
+		gpmc,wr-access-ns = <80>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		MTD partition table
+		===================
+		+------------+-->0x00000000-> U-Boot start
+		|            |
+		|            |-->0x000BFFFF-> U-Boot end
+		|            |-->0x000C0000-> ENV1 start
+		|            |
+		|            |-->0x000DFFFF-> ENV1 end
+		|            |-->0x000E0000-> ENV2 start
+		|            |
+		|            |-->0x000FFFFF-> ENV2 end
+		|            |-->0x00100000-> Kernel start
+		|            |
+		|            |-->0x004FFFFF-> Kernel end
+		|            |-->0x00500000-> File system start
+		|            |
+		|            |-->0x014FFFFF-> File system end
+		|            |-->0x01500000-> User data start
+		|            |
+		|            |-->0x03FFFFFF-> User data end
+		|            |-->0x04000000-> Data storage start
+		|            |
+		+------------+-->0x08000000-> NOR end (Free end)
+		*/
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@1 {
+			label = "env1";
+			reg = <0x000c0000 0x00020000>; /* 128KB */
+		};
+
+		partition@2 {
+			label = "env2";
+			reg = <0x000e0000 0x00020000>; /* 128KB */
+		};
+
+		partition@3 {
+			label = "kernel";
+			reg = <0x00100000 0x00400000>; /* 4MB */
+		};
+
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00500000 0x01000000>; /* 16MB */
+		};
+
+		partition@5 {
+			label = "user";
+			reg = <0x01500000 0x02b00000>; /* 43MB */
+		};
+
+		partition@6 {
+			label = "data";
+			reg = <0x04000000 0x04000000>; /* 64MB */
+		};
+	};
+};
+
+&mac {
+	dual_emac = <1>;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo4_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 8 0>;
+	wp-gpios = <&gpio3 18 0>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* +1.5V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1450000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f9c5da9c7fe1..f6d8ffe98d0b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -18,6 +18,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -30,6 +33,8 @@
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
 		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
@@ -57,6 +62,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -100,13 +110,25 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
+
 		gpio0: gpio@44e07000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x44e07000 0x1000>;
 			interrupts = <96>;
 		};
@@ -117,7 +139,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x4804c000 0x1000>;
 			interrupts = <98>;
 		};
@@ -128,7 +150,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ac000 0x1000>;
 			interrupts = <32>;
 		};
@@ -139,7 +161,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ae000 0x1000>;
 			interrupts = <62>;
 		};
@@ -228,6 +250,50 @@
 			status = "disabled";
 		};
 
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			ti,needs-special-hs-handling;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <64>;
+			interrupt-parent = <&intc>;
+			reg = <0x48060000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <28>;
+			interrupt-parent = <&intc>;
+			reg = <0x481d8000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
@@ -323,6 +389,11 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
+			dmas = <&edma 16
+				&edma 17
+				&edma 18
+				&edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
@@ -334,6 +405,11 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
+			dmas = <&edma 42
+				&edma 43
+				&edma 44
+				&edma 45>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
@@ -346,7 +422,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10000 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -359,7 +435,7 @@
 				reg = <0x47401300 0x100>;
 				reg-names = "phy";
 				status = "disabled";
-				ti,ctrl_mod = <&ctrl_mod>;
+				ti,ctrl_mod = <&usb_ctrl_mod>;
 			};
 
 			usb0: usb@47401000 {
@@ -407,7 +483,7 @@
 				reg = <0x47401b00 0x100>;
 				reg-names = "phy";
 				status = "disabled";
-				ti,ctrl_mod = <&ctrl_mod>;
+				ti,ctrl_mod = <&usb_ctrl_mod>;
 			};
 
 			usb1: usb@47401800 {
@@ -594,6 +670,12 @@
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am3352-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
 		};
 
 		ocmcram: ocmcram@40300000 {
@@ -607,6 +689,7 @@
 			reg = <0x44d00000 0x4000	/* M3 UMEM */
 			       0x44d80000 0x2000>;	/* M3 DMEM */
 			ti,hwmods = "wkup_m3";
+			ti,no-reset-on-init;
 		};
 
 		elm: elm@48080000 {
@@ -617,6 +700,15 @@
 			status = "disabled";
 		};
 
+		lcdc: lcdc@4830e000 {
+			compatible = "ti,am33xx-tilcdc";
+			reg = <0x4830e000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <36>;
+			ti,hwmods = "lcdc";
+			status = "disabled";
+		};
+
 		tscadc: tscadc@44e0d000 {
 			compatible = "ti,am3359-tscadc";
 			reg = <0x44e0d000 0x1000>;
@@ -637,6 +729,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
 			gpmc,num-cs = <7>;
@@ -645,5 +738,59 @@
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
+
+		aes: aes@53500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53500000 0xa0>;
+			interrupts = <103>;
+			dmas = <&edma 6>,
+			       <&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+				<&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+				<&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <111>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ddc1df77ac52..974d103ab3b1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -18,12 +18,21 @@
 
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -35,16 +44,100 @@
 		      <0x48240100 0x0100>;
 	};
 
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x31c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
 	ocp {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		ti,hwmods = "l3_main";
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
 
 		uart0: serial@44e09000 {
 			compatible = "ti,am4372-uart","ti,omap2-uart";
 			reg = <0x44e09000 0x2000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			ti,mbox-names = "wkup_m3";
+			ti,mbox-data = <0 0 0 0>;
+			status = "disabled";
 		};
 
 		timer1: timer@44e31000 {
@@ -52,17 +145,523 @@
 			reg = <0x44e31000 0x400>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			ti,timer-alwon;
+			ti,hwmods = "timer1";
 		};
 
 		timer2: timer@48040000  {
 			compatible = "ti,am4372-timer","ti,am335x-timer";
 			reg = <0x48040000  0x400>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
 		};
 
 		counter32k: counter@44e86000 {
 			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
 			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 74174d48f476..fbf9c4c7a94f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,8 +11,176 @@
 /dts-v1/;
 
 #include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <2>;
+
+			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+			linux,keymap = <0x00000201	/* P1 */
+				0x01000204	/* P4 */
+				0x02000207	/* P7 */
+				0x0300020a	/* NUMERIC_STAR */
+				0x00010202	/* P2 */
+				0x01010205	/* P5 */
+				0x02010208	/* P8 */
+				0x03010200	/* P0 */
+				0x00020203	/* P3 */
+				0x01020206	/* P6 */
+				0x02020209	/* P9 */
+				0x0302020b	/* NUMERIC_POUND */
+				0x00030067	/* UP */
+				0x0103006a	/* RIGHT */
+				0x0203006c	/* DOWN */
+				0x03030069>;	/* LEFT */
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <16>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_ts";
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 0>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <768>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index beee1699d49e..90ce29dbe119 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Evaluation Board";
@@ -30,6 +30,9 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 45b107763e3b..2471d9da767b 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Globalscale Mirabox";
@@ -25,6 +25,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -120,22 +139,6 @@
 					reg = <0x25>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected on the PCB to a USB 3.0 XHCI controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
new file mode 100644
index 000000000000..8ac2ac1f69cc
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -0,0 +1,194 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			pinctrl {
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp57";
+					marvell,function = "gpio";
+				};
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp56";
+					marvell,function = "gpio";
+				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &power_led_pin
+			      &sata1_led_pin
+			      &sata2_led_pin
+			      &backup_led_pin >;
+		pinctrl-names = "default";
+
+		blue_power_led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
+			linux,default-trigger = "heartbeat";
+		};
+
+		green_sata1_led {
+			label = "rn102:green:sata1";
+			gpios = <&gpio0 15 1>;  /* GPIO 15 Active Low */
+			default-state = "on";
+		};
+
+		green_sata2_led {
+			label = "rn102:green:sata2";
+			gpios = <&gpio0 14 1>;   /* GPIO 14 Active Low */
+			default-state = "on";
+		};
+
+		green_backup_led {
+			label = "rn102:green:backup";
+			gpios = <&gpio1 24 1>;   /* GPIO 56 Active Low */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 0>;
+		};
+
+		button@2 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio0 6 1>;
+		};
+
+		button@3 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 26 1>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
new file mode 100644
index 000000000000..b0b32f5fbeb4
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -0,0 +1,193 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to Marvell 88SE9215 SATA controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp60";
+					marvell,function = "gpio";
+				};
+
+				backup_key_pin: backup-key-pin {
+					marvell,pins = "mpp52";
+					marvell,function = "gpio";
+				};
+
+				power_key_pin: power-key-pin {
+					marvell,pins = "mpp62";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp63";
+					marvell,function = "gpo";
+				};
+
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp64";
+					marvell,function = "gpio";
+				};
+
+				reset_key_pin: reset-key-pin {
+					marvell,pins = "mpp65";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue_backup_led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 0>;   /* GPIO 63 Active High */
+			default-state = "off";
+		};
+
+		blue_power_led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 1>;    /* GPIO 64 Active Low */
+			linux,default-trigger = "keep";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&backup_key_pin
+			     &power_key_pin
+			     &reset_key_pin>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 20 1>;
+		};
+
+		button@2 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 0>;
+		};
+
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio2 1 1>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index a3a2fedb8726..f81810a59629 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Reference Design";
@@ -28,6 +28,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Internal mini-PCIe connector */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -85,22 +104,6 @@
 					gpios = <&gpio0 6 1>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Internal mini-PCIe connector */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 90b117624abb..00d6a798c705 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -18,6 +18,8 @@
 
 /include/ "skeleton64.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	model = "Marvell Armada 370 and XP SoC";
 	compatible = "marvell,armada-370-xp";
@@ -38,24 +40,80 @@
 	};
 
 	soc {
-		#address-cells = <1>;
+		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		ranges = <0          0 0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 
 		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
 
 			mpic: interrupt-controller@20000 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
 				#size-cells = <1>;
 				interrupt-controller;
+				msi-controller;
 			};
 
 			coherency-fabric@20200 {
@@ -80,11 +138,17 @@
 				status = "disabled";
 			};
 
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
 			timer@20300 {
-				compatible = "marvell,armada-370-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-				clocks = <&coreclk 2>;
 			};
 
 			sata@a0000 {
@@ -121,7 +185,6 @@
 
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
@@ -132,7 +195,6 @@
 
 			i2c1: i2c@11100 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
@@ -195,50 +257,15 @@
 				status = "disabled";
 			};
 
-			devbus-bootcs@10400 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10400 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs0@10408 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10408 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs1@10410 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10410 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs2@10418 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10418 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
+		};
+	};
 
-			devbus-cs3@10420 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10420 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
 		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index fa3dfc6b4c6a..7a4b82e71aaf 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -15,7 +15,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 /include/ "skeleton.dtsi"
 
 / {
@@ -29,8 +29,67 @@
 	};
 
 	soc {
-		ranges = <0          0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
@@ -78,7 +137,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -89,7 +148,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -100,10 +159,15 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
+			timer@20300 {
+				compatible = "marvell,armada-370-timer";
+				clocks = <&coreclk 2>;
+			};
+
 			coreclk: mvebu-sar@18230 {
 				compatible = "marvell,armada-370-core-clock";
 				reg = <0x18230 0x08>;
@@ -155,6 +219,14 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
@@ -169,54 +241,6 @@
 					0x18304 0x4>;
 				status = "okay";
 			};
-
-			pcie-controller {
-				compatible = "marvell,armada-370-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
new file mode 100644
index 000000000000..c5fe57269f5a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* First mini-PCIe port */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Second mini-PCIe port */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Renesas uPD720202 USB 3.0 controller */
+			pcie@3,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				pinctrl-0 = <&pmx_phy_int>;
+				pinctrl-names = "default";
+
+				pmx_ge0: pmx-ge0 {
+					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+						       "mpp4", "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10", "mpp11";
+					marvell,function = "ge0";
+				};
+
+				pmx_ge1: pmx-ge1 {
+					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+						       "mpp16", "mpp17", "mpp18", "mpp19",
+						       "mpp20", "mpp21", "mpp22", "mpp23";
+					marvell,function = "ge1";
+				};
+
+				pmx_keys: pmx-keys {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				pmx_spi: pmx-spi {
+					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+					marvell,function = "spi";
+				};
+
+				pmx_phy_int: pmx-phy-int {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&pmx_ge0>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&pmx_ge1>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+				pinctrl-0 = <&pmx_spi>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Factory Reset Button";
+			linux,code = <141>; /* KEY_SETUP */
+			gpios = <&gpio1 1 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index e28e68ff864d..bcf6d79a57ec 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
@@ -30,9 +30,70 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000>;	/* Device Bus, NOR 16MiB   */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * All 6 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 0, Lane 2 */
+				status = "okay";
+			};
+			pcie@4,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -127,68 +188,6 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * All 6 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 0, Lane 1 */
-					status = "okay";
-				};
-				pcie@3,0 {
-					/* Port 0, Lane 2 */
-					status = "okay";
-				};
-				pcie@4,0 {
-					/* Port 0, Lane 3 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>;
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index c87b2de29c30..2298e4a910e2 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
@@ -39,9 +39,58 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The 3 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -126,56 +175,6 @@
 					spi-max-frequency = <108000000>;
 				};
 			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * The 3 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
new file mode 100644
index 000000000000..e47c49ecd55c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -0,0 +1,75 @@
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f8eaa383e07f..3f5e6121c730 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78230 SoC";
@@ -44,6 +44,125 @@
 	};
 
 	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78230-pinctrl";
@@ -63,7 +182,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -74,113 +193,9 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
 			};
-
-			/*
-			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-#address-cells = <3>;
-#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d9335da210c..3e9fd1353f89 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78260 SoC";
@@ -45,6 +45,146 @@
 	};
 
 	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78260-pinctrl";
@@ -64,7 +204,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -75,7 +215,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -86,7 +226,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
@@ -97,128 +237,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index c7b1f4d5c1c7..31ba6d8fbadf 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78460 SoC";
@@ -61,6 +61,228 @@
 	};
 
 	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78460-pinctrl";
@@ -80,7 +302,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -91,7 +313,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -102,7 +324,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
@@ -113,194 +335,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. Two units are
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
-					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
-					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@5,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x2800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-
-				pcie@6,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-					reg = <0x3000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 63>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 10>;
-					status = "disabled";
-				};
-
-				pcie@7,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-					reg = <0x3800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 64>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 11>;
-					status = "disabled";
-				};
-
-				pcie@8,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-					reg = <0x4000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 65>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 12>;
-					status = "disabled";
-				};
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 8f510458ea86..5695afcc04bf 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -11,7 +11,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78260.dtsi"
+#include "armada-xp-mv78260.dtsi"
 
 / {
 	model = "PlatHome OpenBlocks AX3-4 board";
@@ -27,9 +27,46 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -148,49 +185,6 @@
 			usb@51000 {
 				status = "okay";
 			};
-
-			/* USB interface in the mini-PCIe connector */
-			usb@52000 {
-				status = "okay";
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 128 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x8000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 416eb9481844..281c6447e872 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -16,7 +16,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP family SoC";
@@ -27,6 +27,13 @@
 	};
 
 	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
 		internal-regs {
 			L2: l2-cache {
 				compatible = "marvell,aurora-system-cache";
@@ -62,7 +69,9 @@
 			};
 
 			timer@20300 {
-				marvell,timer-25Mhz;
+				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -138,6 +147,16 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
+			};
+
 			usb@50000 {
 				clocks = <&gateclk 18>;
 			};
@@ -162,4 +181,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 92b9e21389db..f77065506f1e 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
new file mode 100644
index 000000000000..93ca66f80360
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
@@ -0,0 +1,17 @@
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c7ccbcbffb3e..56ee8282a7a8 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -572,6 +572,7 @@
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 137354689ad0..cb2c010e08e2 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -96,7 +96,6 @@
 			};
 
 			spi0: spi@fffc8000 {
-				status = "okay";
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
 				mtd_dataflash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index b4ec6fe53fc7..17b879990914 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -7,6 +7,8 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index bebf9f55614b..e35c2fcf8298 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bb7f564b3a55..6224f9fe2f2b 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -291,6 +291,22 @@
 					};
 				};
 
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				tcb0 {
 					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -421,6 +437,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -471,6 +490,8 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
 				status = "disabled";
 			};
 
@@ -483,6 +504,8 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 3d77dbe406f4..e9487f6f0166 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -38,8 +38,26 @@
 				status = "okay";
 			};
 
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
 			};
 
 			i2c1: i2c@f8014000 {
@@ -66,6 +84,20 @@
 							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
@@ -121,9 +153,27 @@
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 49e94aba938f..c2554219f7a4 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -7,6 +7,9 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
@@ -22,27 +25,6 @@
 				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
-							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
-							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
-							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
-							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
-							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
-							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
-							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
-							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
-							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
-					};
-				};
-			};
-
-			macb1: ethernet@f8030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 1a3d525a1f5d..8eac66ce0ab7 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 57d45f5bea09..40267a116c3c 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -206,29 +206,6 @@
 					};
 				};
 
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC23 periph B */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC26 periph B */
-					};
-				};
-
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
@@ -277,34 +254,6 @@
 					};
 				};
 
-				macb0 {
-					pinctrl_macb0_rmii: macb0_rmii-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-					};
-
-					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
@@ -542,6 +491,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -553,6 +505,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -564,6 +517,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -605,22 +559,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				status = "disabled";
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf8030000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 000000000000..55731ffba764
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 000000000000..77425a627a94
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 000000000000..2347e9563cef
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,51 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 49e3c45818c2..3a9f6fa4a36a 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -59,6 +59,11 @@
 
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				wm8731: wm8731@1a {
+					compatible = "wm8731";
+					reg = <0x1a>;
+				};
 			};
 
 			pinctrl@fffff400 {
@@ -90,6 +95,10 @@
 			watchdog@fffffe40 {
 				status = "okay";
 			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00600000 {
@@ -105,4 +114,19 @@
 			status = "okay";
 		};
 	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
 };
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 8678e0c11119..978bab4991df 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -65,6 +65,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -75,10 +80,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -120,6 +132,20 @@
 			};
 		};
 
+		graphics2d-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			ble@a0000000 {
+				compatible = "sirf,atlas6-ble";
+				reg = <0xa0000000 0x2000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
 		dsp-iobg {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -181,6 +207,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +227,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +236,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +247,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +273,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
@@ -259,6 +297,11 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
 				status = "disabled";
 			};
@@ -515,6 +558,18 @@
                                                 sirf,function = "usb1_utmi_drvbus";
                                         };
                                 };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
                                 warm_rst_pins_a: warm_rst@0 {
                                         warm_rst {
                                                 sirf,pins = "warm_rstgrp";
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 67ec524098b5..23cd16d736bf 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "BCM11351 BRT board";
-	compatible = "bcm,bcm11351-brt", "bcm,bcm11351";
+	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
 
 	memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
@@ -27,19 +27,20 @@
 		status = "okay";
 	};
 
-	sdio0: sdio@0x3f180000 {
+	sdio1: sdio@3f180000 {
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio1: sdio@0x3f190000 {
+	sdio2: sdio@3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
+	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index c0cdf66f8964..b0c0610d1395 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2012-2013 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -18,7 +18,7 @@
 
 / {
 	model = "BCM11351 SoC";
-	compatible = "bcm,bcm11351";
+	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;
 
 	chosen {
@@ -35,12 +35,12 @@
 	};
 
 	smc@0x3404c000 {
-		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
 	uart@3e000000 {
-		compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clock-frequency = <13000000>;
@@ -49,45 +49,96 @@
 		reg-io-width = <4>;
 	};
 
+	uart@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e003000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
 	L2: l2-cache {
-		compatible = "bcm,bcm11351-a2-pl310-cache";
+		compatible = "brcm,bcm11351-a2-pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
 	};
 
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
 	timer@35006000 {
-		compatible = "bcm,kona-timer";
+		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <32768>;
 	};
 
-	sdio0: sdio@0x3f180000 {
-		compatible = "bcm,kona-sdhci";
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
-		interrupts = <0x0 77 0x4>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio1: sdio@0x3f190000 {
-		compatible = "bcm,kona-sdhci";
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
-		interrupts = <0x0 76 0x4>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio2: sdio@0x3f1a0000 {
-		compatible = "bcm,kona-sdhci";
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
-		interrupts = <0x0 74 0x4>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
-		compatible = "bcm,kona-sdhci";
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
-		interrupts = <0x0 73 0x4>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
new file mode 100644
index 000000000000..08e47c285227
--- /dev/null
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory {
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	sdio1: sdio@3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
deleted file mode 100644
index 48ff03441f5a..000000000000
--- a/arch/arm/boot/dts/ccu8540.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "dbx5x0.dtsi"
-
-/ {
-	model = "ST-Ericsson U8540 platform with Device Tree";
-	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
-	memory@0 {
-		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
-	};
-
-	soc {
-		prcmu@80157000 {
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-		};
-
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 5bce7cc55cf3..588ce58a2959 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -90,6 +90,17 @@
 				};
 			};
 		};
+		mdio: mdio@1e24000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mdio_pins>;
+			bus_freq = <2200000>;
+		};
+		eth0: ethernet@1e20000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mii_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index d70ba5504481..8d17346f9702 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -125,11 +125,33 @@
 					0x14 0x00000010 0x000000f0
 				>;
 			};
+			mdio_pins: pinmux_mdio_pins {
+				pinctrl-single,bits = <
+					/* MDIO_CLK, MDIO_D */
+					0x10 0x00000088 0x000000ff
+				>;
+			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
+
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
@@ -137,7 +159,6 @@
 		serial1: serial@1d0c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
@@ -145,7 +166,6 @@
 		serial2: serial@1d0d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";
@@ -216,6 +236,26 @@
 			interrupts = <56>;
 			status = "disabled";
 		};
+		mdio: mdio@1e24000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+		};
+		eth0: ethernet@1e20000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
index 61a8062e56de..50c0d6904497 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dts
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Compulab CM-A510";
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 5cae2ab69762..8349a248ecea 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "SolidRun CuBox";
@@ -42,6 +42,8 @@
 			regulator-always-on;
 			regulator-boot-on;
 			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
 		};
 	};
 
@@ -53,10 +55,24 @@
 			clock-frequency = <25000000>;
 		};
 	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
 
 &i2c0 {
 	status = "okay";
@@ -83,18 +99,12 @@
 			silabs,pll-master;
 		};
 
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
 		clkout2 {
 			reg = <2>;
+			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
 			silabs,clock-source = <0>;
+			silabs,pll-master;
 		};
 	};
 };
@@ -103,6 +113,7 @@
 	status = "okay";
 	/* sdio0 card detect is connected to wrong pin on CuBox */
 	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
 };
 
 &spi0 {
@@ -116,22 +127,10 @@
 	};
 };
 
-&pinctrl {
-	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
 	pinctrl-names = "default";
-
-	pmx_gpio_1: pmx-gpio-1 {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_12: pmx-gpio-12 {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_18: pmx-gpio-18 {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
 };
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
new file mode 100644
index 000000000000..c11d3636c8e5
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
new file mode 100644
index 000000000000..f5f59bb5a534
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	spi-flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie-port@0 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie-port@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index e5a920beab45..bb725dca3a10 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Marvell DB-MV88AP510-BP Development Board";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 6cab46849cdb..113a8bc7bee7 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,8 +1,11 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -10,252 +13,593 @@
 		gpio2 = &gpio2;
 	};
 
-	soc@f1000000 {
-		compatible = "simple-bus";
+	cpus {
 		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-
-		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
-		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
-		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
-		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
-		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
-		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
-
-		l2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0>;
-		};
+		#size-cells = <0>;
 
-		intc: interrupt-controller {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20204 0x04>, <0x20214 0x04>;
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
 		};
+	};
 
-		core_clk: core-clocks@d0214 {
-			compatible = "marvell,dove-core-clock";
-			reg = <0xd0214 0x4>;
-			#clock-cells = <1>;
-		};
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
 
-		gate_clk: clock-gating-control@d0038 {
-			compatible = "marvell,dove-gating-clock";
-			reg = <0xd0038 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
+
+		pcie: pcie-controller {
+			compatible = "marvell,dove-pcie";
+			status = "disabled";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+			pcie-port@0 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 16>;
+			};
 
-		thermal: thermal@d001c {
-			compatible = "marvell,dove-thermal";
-			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			pcie-port@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 18>;
+			};
 		};
 
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <7>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
+
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
+			};
 
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <8>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
 
-		uart2: serial@12200 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <9>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			intc: main-interrupt-ctrl@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
 
-		uart3: serial@12300 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <10>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
 
-		gpio0: gpio@d0400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0400 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <12>, <13>, <14>, <60>;
-		};
+			core_clk: core-clocks@d0214 {
+				compatible = "marvell,dove-core-clock";
+				reg = <0xd0214 0x4>;
+				#clock-cells = <1>;
+			};
 
-		gpio1: gpio@d0420 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0420 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <61>;
-		};
+			gate_clk: clock-gating-ctrl@d0038 {
+				compatible = "marvell,dove-gating-clock";
+				reg = <0xd0038 0x4>;
+				clocks = <&core_clk 0>;
+				#clock-cells = <1>;
+			};
 
-		gpio2: gpio@e8400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xe8400 0x0c>;
-			ngpios = <8>;
-		};
+			thermal: thermal-diode@d001c {
+				compatible = "marvell,dove-thermal";
+				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			};
 
-		pinctrl: pinctrl@d0200 {
-			compatible = "marvell,dove-pinctrl";
-			reg = <0xd0200 0x10>;
-			clocks = <&gate_clk 22>;
-		};
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		spi0: spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <6>;
-			reg = <0x10600 0x28>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 
-		spi1: spi@14600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <5>;
-			reg = <0x14600 0x28>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		i2c0: i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <11>;
-			clock-frequency = <400000>;
-			timeout-ms = <1000>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		ehci0: usb-host@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <24>;
-			clocks = <&gate_clk 0>;
-			status = "okay";
-		};
+			gpio0: gpio-ctrl@d0400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0400 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <12>, <13>, <14>, <60>;
+			};
 
-		ehci1: usb-host@51000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x51000 0x1000>;
-			interrupts = <25>;
-			clocks = <&gate_clk 1>;
-			status = "okay";
-		};
+			gpio1: gpio-ctrl@d0420 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0420 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61>;
+			};
 
-		sdio0: sdio@92000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x92000 0x100>;
-			interrupts = <35>, <37>;
-			clocks = <&gate_clk 8>;
-			status = "disabled";
-		};
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
 
-		sdio1: sdio@90000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x90000 0x100>;
-			interrupts = <36>, <38>;
-			clocks = <&gate_clk 9>;
-			status = "disabled";
-		};
+			pinctrl: pin-ctrl@d0200 {
+				compatible = "marvell,dove-pinctrl";
+				reg = <0xd0200 0x10>;
+				clocks = <&gate_clk 22>;
+
+				pmx_gpio_0: pmx-gpio-0 {
+					marvell,pins = "mpp0";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_1: pmx-gpio-1 {
+					marvell,pins = "mpp1";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_2: pmx-gpio-2 {
+					marvell,pins = "mpp2";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_3: pmx-gpio-3 {
+					marvell,pins = "mpp3";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_4: pmx-gpio-4 {
+					marvell,pins = "mpp4";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_5: pmx-gpio-5 {
+					marvell,pins = "mpp5";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_6: pmx-gpio-6 {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_7: pmx-gpio-7 {
+					marvell,pins = "mpp7";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_8: pmx-gpio-8 {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_9: pmx-gpio-9 {
+					marvell,pins = "mpp9";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_10: pmx-gpio-10 {
+					marvell,pins = "mpp10";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_11: pmx-gpio-11 {
+					marvell,pins = "mpp11";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_12: pmx-gpio-12 {
+					marvell,pins = "mpp12";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_13: pmx-gpio-13 {
+					marvell,pins = "mpp13";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_extclk: pmx-audio1-extclk {
+					marvell,pins = "mpp13";
+					marvell,function = "audio1";
+				};
+
+				pmx_gpio_14: pmx-gpio-14 {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_15: pmx-gpio-15 {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_16: pmx-gpio-16 {
+					marvell,pins = "mpp16";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_17: pmx-gpio-17 {
+					marvell,pins = "mpp17";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_18: pmx-gpio-18 {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_19: pmx-gpio-19 {
+					marvell,pins = "mpp19";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_20: pmx-gpio-20 {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_21: pmx-gpio-21 {
+					marvell,pins = "mpp21";
+					marvell,function = "gpio";
+				};
+
+				pmx_camera: pmx-camera {
+					marvell,pins = "mpp_camera";
+					marvell,function = "camera";
+				};
+
+				pmx_camera_gpio: pmx-camera-gpio {
+					marvell,pins = "mpp_camera";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio0: pmx-sdio0 {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "sdio0";
+				};
+
+				pmx_sdio0_gpio: pmx-sdio0-gpio {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio1: pmx-sdio1 {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "sdio1";
+				};
+
+				pmx_sdio1_gpio: pmx-sdio1-gpio {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_gpio: pmx-audio1-gpio {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "i2s1/spdifo";
+				};
+
+				pmx_spi0: pmx-spi0 {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "spi0";
+				};
+
+				pmx_spi0_gpio: pmx-spi0-gpio {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "gpio";
+				};
+
+				pmx_uart1: pmx-uart1 {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "uart1";
+				};
+
+				pmx_uart1_gpio: pmx-uart1-gpio {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "gpio";
+				};
+
+				pmx_nand: pmx-nand {
+					marvell,pins = "mpp_nand";
+					marvell,function = "nand";
+				};
+
+				pmx_nand_gpo: pmx-nand-gpo {
+					marvell,pins = "mpp_nand";
+					marvell,function = "gpo";
+				};
+			};
 
-		sata0: sata@a0000 {
-			compatible = "marvell,orion-sata";
-			reg = <0xa0000 0x2400>;
-			interrupts = <62>;
-			clocks = <&gate_clk 3>;
-			nr-ports = <1>;
-			status = "disabled";
-		};
+			spi0: spi-ctrl@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 
-		rtc@d8500 {
-			compatible = "marvell,orion-rtc";
-			reg = <0xd8500 0x20>;
-		};
+			spi1: spi-ctrl@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		crypto: crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xc8000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <31>;
-			clocks = <&gate_clk 15>;
-			status = "okay";
-		};
+			i2c0: i2c-ctrl@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				timeout-ms = <1000>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		xor0: dma-engine@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60a00 0x100>;
-			clocks = <&gate_clk 23>;
-			status = "okay";
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
 
-			channel0 {
-				interrupts = <39>;
-				dmacap,memcpy;
-				dmacap,xor;
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
 			};
 
-			channel1 {
-				interrupts = <40>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			rtc: real-time-clock@d8500 {
+				compatible = "marvell,orion-rtc";
+				reg = <0xd8500 0x20>;
 			};
-		};
 
-		xor1: dma-engine@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60b00 0x100>;
-			clocks = <&gate_clk 24>;
-			status = "okay";
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x30000 0x10000>,
+				      <0xffffe000 0x800>;
+				reg-names = "regs", "sram";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					device-type = "ethernet-phy";
+					/* set phy address in board file */
+				};
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					device_type = "network";
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
 
-			channel0 {
-				interrupts = <42>;
-				dmacap,memcpy;
-				dmacap,xor;
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
 			};
 
-			channel1 {
-				interrupts = <43>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
new file mode 100644
index 000000000000..5babba0a3a75
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra7.dtsi"
+
+/ {
+	model = "TI DRA7";
+	compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x60000000>; /* 1536 MB */
+	};
+
+	mmc2_3v3: fixedregulator-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dra7_pmx_core {
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <12500000>;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1030000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <3400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&mmc2_3v3>;
+	bus-width = <8>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 000000000000..d0df4c4e8b0a
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>,
+		      <0x48214000 0x2000>,
+		      <0x48216000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x44000000 0x2000>,
+		      <0x44800000 0x3000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		dra7_pmx_core: pinmux@4a003400 {
+			compatible = "pinctrl-single";
+			reg = <0x4a003400 0x0464>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x3fffffff>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+                        status = "disabled";
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart7: serial@48420000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48420000 0x100>;
+			ti,hwmods = "uart7";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart8: serial@48422000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48422000 0x100>;
+			ti,hwmods = "uart8";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart9: serial@48424000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48424000 0x100>;
+			ti,hwmods = "uart9";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart10: serial@4ae2b000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4ae2b000 0x100>;
+			ti,hwmods = "uart10";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer13: timer@48828000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48828000 0x80>;
+			ti,hwmods = "timer13";
+			status = "disabled";
+		};
+
+		timer14: timer@4882a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882a000 0x80>;
+			ti,hwmods = "timer14";
+			status = "disabled";
+		};
+
+		timer15: timer@4882c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882c000 0x80>;
+			ti,hwmods = "timer15";
+			status = "disabled";
+		};
+
+		timer16: timer@4882e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882e000 0x80>;
+			ti,hwmods = "timer16";
+			status = "disabled";
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap4-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			status = "disabled";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			status = "disabled";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			status = "disabled";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+			status = "disabled";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+			status = "disabled";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index e8559b753c9d..bc22557d7a6a 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -19,6 +19,14 @@
 		bootargs = "console=ttyAMA0";
 	};
 
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000002>;
+		cpu_off		= <0x84000004>;
+		cpu_on		= <0x84000006>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index b9b3241f173b..861aa7d6fc7d 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for the KZM9D board
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2013 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -21,6 +21,37 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index c8a8c08b48dd..9063a4434d6a 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -14,6 +14,14 @@
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,6 +46,12 @@
 		      <0xe0020000 0x0100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>;
+	};
+
 	sti@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
@@ -67,4 +81,55 @@
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 0>;
 	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 0>, <0 68 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 0>, <0 70 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 0>, <0 72 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 0>, <0 74 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 0>, <0 76 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3f94fe8e3706..a73eeb5f258f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		csis0 = &csis_0;
+		csis1 = &csis_1;
+		fimc0 = &fimc_0;
+		fimc1 = &fimc_1;
+		fimc2 = &fimc_2;
+		fimc3 = &fimc_3;
 	};
 
 	chipid@10000000 {
@@ -43,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -92,6 +104,92 @@
 		reg = <0x10010000 0x400>;
 	};
 
+	camera {
+		compatible = "samsung,fimc", "simple-bus";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_cam: clock-controller {
+			 #clock-cells = <1>;
+		};
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11800000 0x1000>;
+			interrupts = <0 84 0>;
+			clocks = <&clock 256>, <&clock 128>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11810000 0x1000>;
+			interrupts = <0 85 0>;
+			clocks = <&clock 257>, <&clock 129>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11820000 0x1000>;
+			interrupts = <0 86 0>;
+			clocks = <&clock 258>, <&clock 130>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 87 0>;
+			clocks = <&clock 259>, <&clock 131>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x4000>;
+			interrupts = <0 78 0>;
+			clocks = <&clock 260>, <&clock 134>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <4>;
+			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csis_1: csis@11890000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11890000 0x4000>;
+			interrupts = <0 80 0>;
+			clocks = <&clock 261>, <&clock 135>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <2>;
+			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
@@ -155,13 +253,31 @@
 		status = "disabled";
 	};
 
+	ehci@12580000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12580000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock 304>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	ohci@12590000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12590000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock 304>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 170>, <&clock 273>;
-		clock-names = "sclk_mfc", "mfc";
+		clocks = <&clock 273>;
+		clock-names = "mfc";
 		status = "disabled";
 	};
 
@@ -297,8 +413,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
 		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		dmas = <&pdma0 7>, <&pdma0 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 327>, <&clock 159>;
@@ -312,8 +428,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
 		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		dmas = <&pdma1 7>, <&pdma1 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 328>, <&clock 160>;
@@ -327,8 +443,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
 		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		dmas = <&pdma0 9>, <&pdma0 8>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 329>, <&clock 161>;
@@ -342,6 +458,8 @@
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		clocks = <&clock 336>;
+		clock-names = "timers";
 		#pwm-cells = <2>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7e2906..1a12fb23767c 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -32,13 +32,20 @@
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
-	mmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	tmu@100C0000 {
@@ -192,7 +199,12 @@
 				};
 
 				buck1_reg: BUCK1 {
-					regulator-name = "VDD_ARM_1.2V";
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 553bceae8967..a7c212891674 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -797,6 +797,29 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		cam_port_a_io: cam-port-a-io {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 94eebffe3044..63cc571ca307 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,13 +30,62 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
 	};
 
-	vemmc_reg: voltage-regulator@0 {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+
+		vemmc_reg: regulator-0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk0 2 0>;
+			enable-active-high;
+		};
+
+		tsp_reg: regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_FIXED_VOLTAGES";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpl0 3 0>;
+			enable-active-high;
+		};
+
+		cam_af_28v_reg: regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_AF_2.8V_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk1 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_en_reg: regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_IO_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpe2 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_12v_reg: regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpe2 5 0>;
+			enable-active-high;
+		};
+
+		vt_core_15v_reg: regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "VT_CORE_1.5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&gpe2 2 0>;
+			enable-active-high;
+		};
 	};
 
 	sdhci_emmc: sdhci@12510000 {
@@ -97,15 +146,6 @@
 		};
 	};
 
-	tsp_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_FIXED_VOLTAGES";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpl0 3 0>;
-		enable-active-high;
-	};
-
 	i2c@13890000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -218,6 +258,12 @@
 				     regulator-always-on;
 				};
 
+				vtcam_reg: LDO12 {
+				     regulator-name = "VT_CAM_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
 				vcclcd_reg: LDO13 {
 				     regulator-name = "VCC_3.3V_LCD";
 				     regulator-min-microvolt = <3300000>;
@@ -244,7 +290,12 @@
 				};
 
 				varm_breg: BUCK1 {
-				     regulator-name = "VARM_1.2V_C210";
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
 				     regulator-min-microvolt = <900000>;
 				     regulator-max-microvolt = <1350000>;
 				     regulator-always-on;
@@ -301,4 +352,26 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	camera {
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 889cdada1ce9..d2e3f5f5916d 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -350,3 +350,7 @@
 		status = "okay";
 	};
 };
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b7f358a93bcb..057d6829d319 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -72,7 +72,7 @@
 		};
 	};
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4210-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
@@ -125,4 +125,34 @@
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+
+		fimc_3: fimc@11830000 {
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7993641cb32a..d65984c440f6 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -27,13 +27,25 @@
 		bootargs ="console=ttySAC2,115200";
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	pinctrl@11000000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
new file mode 100644
index 000000000000..fb7b9ae5f399
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -0,0 +1,579 @@
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "Samsung Trats 2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412";
+
+	aliases {
+		i2c8 = &i2c_ak8975;
+	};
+
+	memory {
+		reg =  <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+	};
+
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vemmc_reg: regulator-0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk0 2 0>;
+			enable-active-high;
+		};
+
+		cam_io_reg: voltage-regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_SENSOR_A";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 2 0>;
+			enable-active-high;
+		};
+
+		/* More to come */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-down {
+			interrupt-parent = <&gpj1>;
+			interrupts = <2 0>;
+			gpios = <&gpj1 2 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			interrupt-parent = <&gpj1>;
+			interrupts = <1 0>;
+			gpios = <&gpj1 1 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			interrupt-parent = <&gpx2>;
+			interrupts = <7 0>;
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpm2>;
+			interrupts = <3 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&ldo23_reg>;
+			vdd-supply = <&ldo24_reg>;
+		};
+	};
+
+	i2c@138D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c7_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		max77686_pmic@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx0>;
+			interrupts = <7 0>;
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: ldo1 {
+					regulator-compatible = "LDO1";
+					regulator-name = "VALIVE_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VM1M2_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VCC_1.8V_AP";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VCC_2.8V_AP";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VCC_1.8V_IO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VMPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VMIPI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo9_reg: ldo9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "CAM_ISP_MIPI_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo10_reg: ldo10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo11_reg: ldo11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "VABB1_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo12_reg: ldo12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "VUOTG_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-off;
+				};
+
+				ldo13_reg: ldo13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "NFC_AVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo14_reg: ldo14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "VABB2_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo15_reg: ldo15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "VHSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo16_reg: ldo16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VHSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo17_reg: ldo17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo18_reg: ldo18 {
+					regulator-compatible = "LDO18";
+					regulator-name = "CAM_ISP_SEN_IO_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo19_reg: ldo19 {
+					regulator-compatible = "LDO19";
+					regulator-name = "VT_CAM_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo20_reg: ldo20 {
+					regulator-compatible = "LDO20";
+					regulator-name = "VDDQ_PRE_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo21_reg: ldo21 {
+					regulator-compatible = "LDO21";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo22_reg: ldo22 {
+					regulator-compatible = "LDO22";
+					regulator-name = "VMEM_VDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo23_reg: ldo23 {
+					regulator-compatible = "LDO23";
+					regulator-name = "TSP_AVDD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-mem-idle;
+				};
+
+				ldo24_reg: ldo24 {
+					regulator-compatible = "LDO24";
+					regulator-name = "TSP_VDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo25_reg: ldo25 {
+					regulator-compatible = "LDO25";
+					regulator-name = "LCD_VCC_3.3V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo26_reg: ldo26 {
+					regulator-compatible = "LDO26";
+					regulator-name = "MOTOR_VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-idle;
+				};
+
+				buck1_reg: buck1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck2_reg: buck2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck3_reg: buck3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck4_reg: buck4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck5_reg: buck5 {
+					regulator-compatible = "BUCK5";
+					regulator-name = "VMEM_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: buck6 {
+					regulator-compatible = "BUCK6";
+					regulator-name = "VCC_SUB_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: buck7 {
+					regulator-compatible = "BUCK7";
+					regulator-name = "VCC_SUB_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: buck8 {
+					regulator-compatible = "BUCK8";
+					regulator-name = "VMEM_VDDF_3.0V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				buck9_reg: buck9 {
+					regulator-compatible = "BUCK9";
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-off;
+				};
+			};
+		};
+	};
+
+	sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c_ak8975: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ak8975@0c {
+			compatible = "ak,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 0>;
+		};
+	};
+
+	spi_1: spi@13930000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		status = "okay";
+
+		s5c73m3_spi: s5c73m3 {
+			compatible = "samsung,s5c73m3";
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+			controller-data {
+				cs-gpio = <&gpb 5 0>;
+				samsung,spi-feedback-delay = <2>;
+			};
+		};
+	};
+
+	camera {
+		pinctrl-0 = <&cam_port_b_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+
+		csis_1: csis@11890000 {
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <160000000>;
+			status = "okay";
+
+			/* Camera D (4) MIPI CSI-2 (CSIS1) */
+			port@4 {
+				reg = <4>;
+				csis1_ep: endpoint {
+					remote-endpoint = <&is_s5k6a3_ep>;
+					data-lanes = <1>;
+					samsung,csis-hs-settle = <18>;
+					samsung,csis-wclk;
+				};
+			};
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			status = "okay";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			status = "okay";
+		};
+
+		fimc-is@12000000 {
+			pinctrl-0 = <&fimc_is_uart>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			i2c1_isp: i2c-isp@12140000 {
+				pinctrl-0 = <&fimc_is_i2c1>;
+				pinctrl-names = "default";
+
+				s5k6a3@10 {
+					compatible = "samsung,s5k6a3";
+					reg = <0x10>;
+					svdda-supply = <&cam_io_reg>;
+					svddio-supply = <&ldo19_reg>;
+					clock-frequency = <24000000>;
+					/* CAM_B_CLKOUT */
+					clocks = <&clock_cam 1>;
+					clock-names = "mclk";
+					samsung,camclk-out = <1>;
+					gpios = <&gpm1 6 0>;
+
+					port {
+						is_s5k6a3_ep: endpoint {
+							remote-endpoint = <&csis1_ep>;
+							data-lanes = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f7c5c0..99b26df8dbc7 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
 	};
@@ -778,16 +791,29 @@
 			samsung,pin-drv = <3>;
 		};
 
-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
 
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;
@@ -822,6 +848,27 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		fimc_is_i2c0: fimc-is-i2c0 {
+			samsung,pins = "gpm4-0", "gpm4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_i2c1: fimc-is-i2c1 {
+			samsung,pins = "gpm4-2", "gpm4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_uart: fimc-is-uart {
+			samsung,pins = "gpm3-5", "gpm3-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194ba329..ad531fe6ab95 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -26,9 +26,16 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
 	};
 
-	clock: clock-controller@0x10030000 {
+	pd_isp: isp-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4412-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
@@ -73,4 +80,100 @@
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+			samsung,cam-if;
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x12390000 0x1000>;
+			interrupts = <0 105 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x123A0000 0x1000>;
+			interrupts = <0 106 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 354>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_is: fimc-is@12000000 {
+			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			reg = <0x12000000 0x260000>;
+			interrupts = <0 90 0>, <0 95 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
+				<&clock 356>, <&clock 17>, <&clock 357>,
+				<&clock 358>, <&clock 359>, <&clock 360>,
+				<&clock 450>,<&clock 451>, <&clock 452>,
+				<&clock 453>, <&clock 176>, <&clock 13>,
+				<&clock 454>, <&clock 395>, <&clock 455>;
+			clock-names = "lite0", "lite1", "ppmuispx",
+				      "ppmuispmx", "mpll", "isp",
+				      "drc", "fd", "mcuisp",
+				      "ispdiv0", "ispdiv1", "mcuispdiv0",
+				      "mcuispdiv1", "uart", "aclk200",
+				      "div_aclk200", "aclk400mcuisp",
+				      "div_aclk400mcuisp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			pmu {
+				reg = <0x10020000 0x3000>;
+			};
+
+			i2c1_isp: i2c-isp@12140000 {
+				compatible = "samsung,exynos4212-i2c-isp";
+				reg = <0x12140000 0x100>;
+				clocks = <&clock 370>;
+				clock-names = "i2c_isp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f65e124c04a6..074739d39e2d 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -95,7 +95,7 @@
 		interrupts = <0 54 0>;
 	};
 
-	rtc {
+	rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
@@ -108,4 +108,23 @@
 		interrupts = <0 42 0>;
 		status = "disabled";
 	};
+
+	fimd@14400000 {
+		compatible = "samsung,exynos5250-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x14400000 0x40000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <18 4>, <18 5>, <18 6>;
+		status = "disabled";
+	};
+
+	dp-controller@145B0000 {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145B0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272c7afd..684527087aa4 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -37,6 +38,28 @@
 		s5m8767_pmic@66 {
 			compatible = "samsung,s5m8767-pmic";
 			reg = <0x66>;
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			vinb1-supply = <&main_dc_reg>;
+			vinb2-supply = <&main_dc_reg>;
+			vinb3-supply = <&main_dc_reg>;
+			vinb4-supply = <&main_dc_reg>;
+			vinb5-supply = <&main_dc_reg>;
+			vinb6-supply = <&main_dc_reg>;
+			vinb7-supply = <&main_dc_reg>;
+			vinb8-supply = <&main_dc_reg>;
+			vinb9-supply = <&main_dc_reg>;
+
+			vinl1-supply = <&buck7_reg>;
+			vinl2-supply = <&buck7_reg>;
+			vinl3-supply = <&buck7_reg>;
+			vinl4-supply = <&main_dc_reg>;
+			vinl5-supply = <&main_dc_reg>;
+			vinl6-supply = <&main_dc_reg>;
+			vinl7-supply = <&main_dc_reg>;
+			vinl8-supply = <&buck8_reg>;
+			vinl9-supply = <&buck8_reg>;
 
 			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
 			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
@@ -276,6 +299,16 @@
 					op_mode = <1>;
 				};
 
+				buck7_reg: BUCK7 {
+					regulator-name = "PVDD_BUCK7";
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "PVDD_BUCK8";
+					regulator-always-on;
+				};
+
 				buck9_reg: BUCK9 {
 					regulator-name = "VDD_33_OFF_EXT1";
 					regulator-min-microvolt = <750000>;
@@ -291,11 +324,33 @@
 	};
 
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x50>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
-		status = "disabled";
+		wm1811a@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+
+			AVDD2-supply = <&main_dc_reg>;
+			CPVDD-supply = <&main_dc_reg>;
+			DBVDD1-supply = <&main_dc_reg>;
+			DBVDD2-supply = <&main_dc_reg>;
+			DBVDD3-supply = <&main_dc_reg>;
+			LDO1VDD-supply = <&main_dc_reg>;
+			SPKVDD1-supply = <&main_dc_reg>;
+			SPKVDD2-supply = <&main_dc_reg>;
+
+			wlf,ldo1ena = <&gpb0 0 0>;
+			wlf,ldo2ena = <&gpb0 1 0>;
+		};
 	};
 
 	i2c@12CA0000 {
@@ -314,6 +369,17 @@
 		status = "disabled";
 	};
 
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos4212-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	i2c@121D0000 {
 		status = "disabled";
 	};
@@ -364,6 +430,10 @@
 		status = "disabled";
 	};
 
+	i2s0: i2s@03830000 {
+		status = "okay";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
@@ -429,18 +499,32 @@
 		vdd-supply = <&ldo8_reg>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_33ON_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 1>;
-		enable-active-high;
-	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	reg_hdmi_en: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
+		main_dc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "MAIN_DC";
+		};
+
+		mmc_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 1>;
+			enable-active-high;
+		};
+
+		reg_hdmi_en: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdmi-en";
+		};
 	};
 
 	fixed-rate-clocks {
@@ -450,16 +534,18 @@
 		};
 	};
 
-	dp-controller {
+	dp-controller@145B0000 {
 		samsung,color-space = <0>;
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
 		samsung,color-depth = <1>;
 		samsung,link-rate = <0x0a>;
 		samsung,lane-count = <4>;
+		status = "okay";
 	};
 
 	fimd: fimd@14400000 {
+		status = "okay";
 		display-timings {
 			native-mode = <&timing0>;
 			timing0: timing@0 {
@@ -477,7 +563,21 @@
 		};
 	};
 
-	rtc {
-		status = "okay";
+	usb_hub_bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// SMSC USB3503 connected in hardware only mode as a PHY
+		usb_hub: usb_hub {
+			compatible = "smsc,usb3503a";
+
+			reset-gpios = <&gpx3 5 1>;
+			connect-gpios = <&gpd1 7 1>;
+		};
+	};
+
+	usb@12110000 {
+		usb-phy = <&usb2_phy>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 724a22f9b1c8..9a49e6804ae1 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -210,21 +210,21 @@
 			samsung,pins = "gpa0-2", "gpa0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_hs_bus: i2c2-hs-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart2_data: uart2-data {
@@ -238,21 +238,21 @@
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_hs_bus: i2c3-hs-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart3_data: uart3-data {
@@ -273,14 +273,14 @@
 			samsung,pins = "gpa2-0", "gpa2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpa2-2", "gpa2-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@
 			samsung,pins = "gpb3-0", "gpb3-1";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c1_hs_bus: i2c1-hs-bus {
 			samsung,pins = "gpb3-2", "gpb3-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@
 			samsung,pins = "gpd0-2", "gpd0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		dp_hpd: dp_hpd {
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -649,42 +649,42 @@
 				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c2_bus: cam-i2c2-bus {
 			samsung,pins = "gpe0-6", "gpe1-0";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi1_bus: cam-spi1-bus {
 			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c1_bus: cam-i2c1-bus {
 			samsung,pins = "gpf0-2", "gpf0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c0_bus: cam-i2c0-bus {
 			samsung,pins = "gpf0-0", "gpf0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi0_bus: cam-spi0-bus {
 			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_bayrgb_bus: cam-bayrgb-bus {
@@ -695,7 +695,7 @@
 				       "gpg2-0", "gpg2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_port_a: cam-port-a {
@@ -704,7 +704,7 @@
 				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -756,7 +756,7 @@
 				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		c2c_txd: c2c-txd {
@@ -766,7 +766,7 @@
 				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 49f18c24a576..f86d56760a45 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,14 +231,6 @@
 		status = "okay";
 	};
 
-	i2s1: i2s@12D60000 {
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		status = "disabled";
-	};
-
 	sound {
 		compatible = "samsung,smdk-wm8994";
 
@@ -250,7 +242,7 @@
 		samsung,vbus-gpio = <&gpx2 6 0>;
 	};
 
-	dp-controller {
+	dp-controller@145B0000 {
 		samsung,color-space = <0>;
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
@@ -260,21 +252,25 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&dp_hpd>;
+		status = "okay";
 	};
 
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing@0 {
-			/* 1280x800 */
-			clock-frequency = <50000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <4>;
-			hback-porch = <4>;
-			hsync-len = <4>;
-			vback-porch = <4>;
-			vfront-porch = <4>;
-			vsync-len = <4>;
+	fimd@14400000 {
+		status = "okay";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				/* 1280x800 */
+				clock-frequency = <50000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hfront-porch = <4>;
+				hback-porch = <4>;
+				hsync-len = <4>;
+				vback-porch = <4>;
+				vfront-porch = <4>;
+				vsync-len = <4>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index e79331dba12d..fd711e245e8d 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -171,10 +171,6 @@
 		};
 	};
 
-	rtc {
-		status = "okay";
-	};
-
 	/*
 	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
 	 * reduce EMI.
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 376090f07231..9db5047812f3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -68,17 +68,17 @@
 		};
 	};
 
-	pd_gsc: gsc-power-domain@0x10044000 {
+	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
 	};
 
-	pd_mfc: mfc-power-domain@0x10044040 {
+	pd_mfc: mfc-power-domain@10044040 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044040 0x20>;
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
@@ -96,6 +96,11 @@
 			     <1 14 0xf08>,
 			     <1 11 0xf08>,
 			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 
 	mct@101C0000 {
@@ -163,16 +168,27 @@
 		clock-names = "watchdog";
 	};
 
+	g2d@10850000 {
+		compatible = "samsung,exynos5250-g2d";
+		reg = <0x10850000 0x1000>;
+		interrupts = <0 91 0>;
+		clocks = <&clock 345>;
+		clock-names = "fimg2d";
+	};
+
 	codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
 		samsung,power-domain = <&pd_mfc>;
+		clocks = <&clock 266>;
+		clock-names = "mfc";
 	};
 
-	rtc {
+	rtc@101E0000 {
 		clocks = <&clock 337>;
 		clock-names = "rtc";
+		status = "okay";
 	};
 
 	tmu@10060000 {
@@ -406,6 +422,7 @@
 
 	i2s0: i2s@03830000 {
 		compatible = "samsung,s5pv210-i2s";
+		status = "disabled";
 		reg = <0x03830000 0x100>;
 		dmas = <&pdma0 10
 			&pdma0 9
@@ -422,6 +439,7 @@
 
 	i2s1: i2s@12D60000 {
 		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D60000 0x100>;
 		dmas = <&pdma1 12
 			&pdma1 11>;
@@ -434,6 +452,7 @@
 
 	i2s2: i2s@12D70000 {
 		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D70000 0x100>;
 		dmas = <&pdma0 12
 			&pdma0 11>;
@@ -559,7 +578,7 @@
 		};
 	};
 
-	gsc_0:  gsc@0x13e00000 {
+	gsc_0:  gsc@13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
@@ -568,7 +587,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_1:  gsc@0x13e10000 {
+	gsc_1:  gsc@13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
@@ -577,7 +596,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_2:  gsc@0x13e20000 {
+	gsc_2:  gsc@13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
@@ -586,7 +605,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_3:  gsc@0x13e30000 {
+	gsc_3:  gsc@13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
@@ -599,41 +618,46 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
-				<&clock 333>, <&clock 333>;
+		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
+				<&clock 159>, <&clock 1024>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "hdmiphy";
+				"sclk_hdmiphy", "mout_hdmi";
 	};
 
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
+		clocks = <&clock 343>, <&clock 136>;
+		clock-names = "mixer", "sclk_hdmi";
 	};
 
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
+	dp_phy: video-phy@10040720 {
+		compatible = "samsung,exynos5250-dp-video-phy";
+		reg = <0x10040720 4>;
+		#phy-cells = <0>;
+	};
+
+	dp-controller@145B0000 {
 		clocks = <&clock 342>;
 		clock-names = "dp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
-	fimd {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
+	fimd@14400000 {
 		clocks = <&clock 133>, <&clock 339>;
 		clock-names = "sclk_fimd", "fimd";
 	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 303>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 5848c425ae4d..e695aba5f73c 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -59,6 +59,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		dp_hpd: dp_hpd {
+			samsung,pins = "gpx0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@13410000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 08607df6a180..79524c74c603 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -30,4 +30,61 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dp-controller@145B0000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+		status = "okay";
+	};
+
+	fimd@14400000 {
+		status = "okay";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				clock-frequency = <50000>;
+				hactive = <2560>;
+				vactive = <1600>;
+				hfront-porch = <48>;
+				hback-porch = <80>;
+				hsync-len = <32>;
+				vback-porch = <16>;
+				vfront-porch = <8>;
+				vsync-len = <6>;
+			};
+		};
+	};
+
+	pinctrl@13400000 {
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	hdmi@14530000 {
+		status = "okay";
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8c54c4b74f0e..09aa06cb3d3a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -14,7 +14,10 @@
  */
 
 #include "exynos5.dtsi"
-/include/ "exynos5420-pinctrl.dtsi"
+#include "exynos5420-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
 / {
 	compatible = "samsung,exynos5420";
 
@@ -24,6 +27,10 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 	};
 
 	cpus {
@@ -59,12 +66,28 @@
 		};
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5420-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
 	};
 
+	clock_audss: audss-clock-controller@3810000 {
+		compatible = "samsung,exynos5420-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+		clocks = <&clock 148>;
+		clock-names = "sclk_audio";
+	};
+
+	codec@11000000 {
+		compatible = "samsung,mfc-v7";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+		clocks = <&clock 401>;
+		clock-names = "mfc";
+	};
+
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
@@ -90,6 +113,41 @@
 		};
 	};
 
+	gsc_pd: power-domain@10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	isp_pd: power-domain@10044020 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044020 0x20>;
+	};
+
+	mfc_pd: power-domain@10044060 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044060 0x20>;
+	};
+
+	disp_pd: power-domain@100440C0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440C0 0x20>;
+	};
+
+	mau_pd: power-domain@100440E0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440E0 0x20>;
+	};
+
+	g2d_pd: power-domain@10044100 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044100 0x20>;
+	};
+
+	msc_pd: power-domain@10044120 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044120 0x20>;
+	};
+
 	pinctrl_0: pinctrl@13400000 {
 		compatible = "samsung,exynos5420-pinctrl";
 		reg = <0x13400000 0x1000>;
@@ -126,6 +184,12 @@
 		interrupts = <0 47 0>;
 	};
 
+	rtc@101E0000 {
+		clocks = <&clock 317>;
+		clock-names = "rtc";
+		status = "okay";
+	};
+
 	serial@12C00000 {
 		clocks = <&clock 257>, <&clock 128>;
 		clock-names = "uart", "clk_uart_baud0";
@@ -145,4 +209,105 @@
 		clocks = <&clock 260>, <&clock 131>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
+
+	dp_phy: video-phy@10040728 {
+		compatible = "samsung,exynos5250-dp-video-phy";
+		reg = <0x10040728 4>;
+		#phy-cells = <0>;
+	};
+
+	dp-controller@145B0000 {
+		clocks = <&clock 412>;
+		clock-names = "dp";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+	fimd@14400000 {
+		samsung,power-domain = <&disp_pd>;
+		clocks = <&clock 147>, <&clock 421>;
+		clock-names = "sclk_fimd", "fimd";
+	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v2";
+		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 270>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 261>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 262>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 263>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 264>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		status = "disabled";
+	};
+
+	hdmi@14530000 {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x70000>;
+		interrupts = <0 95 0>;
+		clocks = <&clock 413>, <&clock 143>, <&clock 768>,
+			<&clock 158>, <&clock 640>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+			"sclk_hdmiphy", "mout_hdmi";
+		status = "disabled";
+	};
+
+	mixer@14450000 {
+		compatible = "samsung,exynos5420-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+		clocks = <&clock 431>, <&clock 143>;
+		clock-names = "mixer", "sclk_hdmi";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 5b22508050da..777fb1c2c70f 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ede772741f81..d58cb787061a 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	spi_0: spi@D0000 {
@@ -68,9 +68,11 @@
 
 	pcie@290000 {
 		reset-gpio = <&pin_ctrl 5 0>;
+		status = "okay";
 	};
 
 	pcie@2a0000 {
 		reset-gpio = <&pin_ctrl 22 0>;
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 586134e2a382..8da107088ce4 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -18,9 +18,12 @@
 
 	aliases {
 		spi0 = &spi_0;
+		tmuctrl0 = &tmuctrl_0;
+		tmuctrl1 = &tmuctrl_1;
+		tmuctrl2 = &tmuctrl_2;
 	};
 
-	clock: clock-controller@0x160000 {
+	clock: clock-controller@160000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x1000>;
 		#clock-cells = <1>;
@@ -207,6 +210,30 @@
 		clock-names = "rtc";
 	};
 
+	tmuctrl_0: tmuctrl@160118 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160118 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_1: tmuctrl@16011C {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x16011C 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_2: tmuctrl@160120 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160120 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
 	sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
@@ -249,6 +276,7 @@
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 53>;
 		num-lanes = <4>;
+		status = "disabled";
 	};
 
 	pcie@2a0000 {
@@ -269,5 +297,6 @@
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 56>;
 		num-lanes = <4>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
deleted file mode 100644
index 3d580d6447f9..000000000000
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	gpio_keys {
-		button@1 {
-			gpios = <&gpio6 25 0x4>;
-		};
-	};
-
-	soc {
-		i2c@80110000 {
-			bu21013_tp@0x5c {
-				reset-gpio = <&gpio4 15 0x4>;
-			};
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500 {
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index da0588a04131..1f026adefd45 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,14 +45,14 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -90,6 +90,11 @@
 		};
 
 		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pwm2_pins_a>;
@@ -107,6 +112,16 @@
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index d107c4af321f..526bfdbd87f9 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,21 +40,21 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -69,6 +69,10 @@
 		};
 
 		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			duart: serial@80070000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
new file mode 100644
index 000000000000..5c0f32ca3a93
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 85c3864b6a56..cb64e2b191ea 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale STMP378x Development Board";
@@ -39,12 +39,12 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 587ceef81e45..c96ceaef7ddf 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx23-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -20,6 +21,8 @@
 		gpio2 = &gpio2;
 		serial0 = &auart0;
 		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
 	};
 
 	cpus {
@@ -76,23 +79,21 @@
 				#size-cells = <1>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
-				interrupts = <13>, <56>;
-				interrupt-names = "gpmi-dma", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
 				clocks = <&clks 34>;
 				clock-names = "gpmi_io";
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
-				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
 				reg = <0x80010000 0x2000>;
-				interrupts = <15 14>;
+				interrupts = <15>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 1>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
@@ -137,174 +138,174 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
-						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
-						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
-						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
-						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
-						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
-						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
-						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
-						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
-						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
-						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
-						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
-						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
-						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
-						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
-						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
-						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
-						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_fixup: gpmi-pins-fixup {
 					fsl,pinmux-ids = <
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
-						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
-						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
-						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
 					fsl,pinmux-ids = <
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+						MX23_PAD_PWM2__PWM2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
-						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
-						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
-						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
-						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
-						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
-						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
-						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
-						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
-						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
-						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
-						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
-						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
-						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
@@ -366,11 +367,10 @@
 
 			ssp1: ssp@80034000 {
 				reg = <0x80034000 0x2000>;
-				interrupts = <2 20>;
+				interrupts = <2>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 2>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
@@ -431,6 +431,7 @@
 				reg = <0x80050000 0x2000>;
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
+				clocks = <&clks 26>;
 			};
 
 			spdif@80054000 {
@@ -472,7 +473,7 @@
 			auart0: serial@8006c000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
-				interrupts = <24 25 23>;
+				interrupts = <24>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
 				dma-names = "rx", "tx";
@@ -482,7 +483,7 @@
 			auart1: serial@8006e000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
-				interrupts = <59 60 58>;
+				interrupts = <59>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 				dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 701153992c69..737ed5da8f71 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -13,19 +13,35 @@
 
 / {
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 		usb0 = &usbotg;
 		usb1 = &usbhost1;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
 	asic: asic-interrupt-controller@68000000 {
 		compatible = "fsl,imx25-asic", "fsl,avic";
 		interrupt-controller;
@@ -377,7 +393,8 @@
 				status = "disabled";
 			};
 
-			lcdc@53fbc000 {
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
@@ -424,6 +441,7 @@
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				interrupts = <34>;
 			};
 
@@ -444,6 +462,13 @@
 				interrupts = <26>;
 			};
 
+			iim: iim@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
 			usbphy1: usbphy@1 {
 				compatible = "nop-usbphy";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 66b8e1c1b0be..47c8c26012e4 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -16,6 +16,26 @@
 	model = "Armadeus Systems APF27Dev docking/development board";
 	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
 
+	display: display {
+		model = "Chimei-LW700AT9003";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <640>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,9 +70,20 @@
 	status = "okay";
 };
 
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 000000000000..5a31c776513f
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dts"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3v3: 3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&owire {
+	status = "okay";
+};
+
+&sdhci2 {
+	cd-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
new file mode 100644
index 000000000000..c8d57d1d0743
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 0>,
+		<&gpio4 27 0>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index e7ed9786920a..0fc6551786c6 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -35,3 +35,16 @@
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
+
+&weim {
+	can@d4000000 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 0x2>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index f0105651869d..4ec402c38945 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -17,49 +17,22 @@
 	compatible = "phytec,imx27-pcm038", "fsl,imx27";
 
 	memory {
-		reg = <0x0 0x0>;
+		reg = <0xa0000000 0x08000000>;
 	};
+};
 
-	soc {
-		aipi@10000000 { /* aipi1 */
-			serial@1000a000 {
-				status = "okay";
-			};
-
-			i2c@1001d000 {
-				clock-frequency = <400000>;
-				status = "okay";
-				at24@52 {
-					compatible = "at,24c32";
-					pagesize = <32>;
-					reg = <0x52>;
-				};
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-				lm75@4a {
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-		};
+&audmux {
+	status = "okay";
 
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
-				phy-reset-gpios = <&gpio3 30 0>;
-				status = "okay";
-			};
-		};
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
 	};
 
-	nor_flash@c0000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0xc0000000 0x02000000>;
-		linux,mtd-name = "physmap-flash.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
 	};
 };
 
@@ -80,28 +53,16 @@
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
-			sw1a_reg: sw1a {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2a_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2b_reg: sw2b {
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -172,8 +133,62 @@
 	};
 };
 
+&fec {
+	phy-reset-gpios = <&gpio3 30 0>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
 &nfc {
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
 	status = "okay";
 };
+
+&uart1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@c0000000 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@c8000000 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 0695264ddf1b..826231eb4446 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -13,25 +13,27 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
 		spi0 = &cspi1;
 		spi1 = &cspi2;
 		spi2 = &cspi3;
 	};
 
-	avic: avic-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-avic", "fsl,avic";
+	aitc: aitc-interrupt-controller@e0000000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x10040000 0x1000>;
@@ -47,11 +49,29 @@
 		};
 	};
 
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks 18>;
+			voltage-tolerance = <5>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
+		interrupt-parent = <&aitc>;
 		ranges;
 
 		aipi@10000000 { /* AIPI1 */
@@ -75,7 +95,7 @@
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
 				interrupts = <27>;
-				clocks = <&clks 0>;
+				clocks = <&clks 74>;
 			};
 
 			gpt1: timer@10003000 {
@@ -102,7 +122,8 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm0: pwm@10006000 {
+			pwm: pwm@10006000 {
+				#pwm-cells = <2>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -110,6 +131,21 @@
 				clock-names = "ipg", "per";
 			};
 
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks 37>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks 35>;
+				status = "disabled";
+			};
+
 			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
@@ -152,7 +188,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 53>;
+				clocks = <&clks 53>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -163,7 +199,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 52>;
+				clocks = <&clks 52>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -260,13 +296,21 @@
 				#interrupt-cells = <2>;
 			};
 
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks 0>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
 			cspi3: cspi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 51>;
+				clocks = <&clks 51>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -342,6 +386,15 @@
 			reg = <0x10020000 0x20000>;
 			ranges;
 
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
 			coda: coda@10023000 {
 				compatible = "fsl,imx27-vpu";
 				reg = <0x10023000 0x0200>;
@@ -351,27 +404,37 @@
 				iram = <&iram>;
 			};
 
+			sahara2: sahara@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks 32>, <&clks 64>;
+				clock-names = "ipg", "ahb";
+			};
+
 			clks: ccm@10027000{
 				compatible = "fsl,imx27-ccm";
 				reg = <0x10027000 0x1000>;
 				#clock-cells = <1>;
 			};
 
+			iim: iim@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks 38>;
+			};
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;
-				clocks = <&clks 48>, <&clks 67>, <&clks 0>;
-				clock-names = "ipg", "ahb", "ptp";
+				clocks = <&clks 48>, <&clks 67>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 		};
 
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-
 		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -381,5 +444,27 @@
 			clocks = <&clks 54>;
 			status = "disabled";
 		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks 0>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: iram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7eb075876c4c..7198fe3798c6 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index b602494c152b..e2efd8d89c4f 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,7 +10,7 @@
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
@@ -41,30 +41,30 @@
 				hog_pins_apf28dev: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
-						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
-						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
-						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
-						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 0e7fed47bd8d..6f254ca816cb 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
@@ -40,53 +40,53 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
-						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
-						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apx4: lcdif-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
-						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
-						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
-						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
-						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
 					fsl,pinmux-ids = <
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 94c4476972c3..cabb6171a19d 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -23,37 +23,34 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_cfa10036>;
-
-				hog_pins_cfa10036: hog-10036@0 {
+				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pins_cfa10036: leds-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+						MX28_PAD_AUART1_RX__GPIO_3_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usb0_otg_cfa10036: otg-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+						MX28_PAD_GPMI_RDY0__USB0_ID
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
@@ -83,6 +80,8 @@
 
 				ssd1306: oled@3c {
 					compatible = "solomon,ssd1306fb-i2c";
+					pinctrl-names = "default";
+					pinctrl-0 = <&ssd1306_cfa10036>;
 					reg = <0x3c>;
 					reset-gpios = <&gpio2 7 0>;
 					solomon,height = <32>;
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index c2ef3a3d655e..f93e9a700e52 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
@@ -22,18 +22,24 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10037>;
+				usb_pins_cfa10037: usb-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
 
-				hog_pins_cfa10037: hog-10037@0 {
+				mac0_pins_cfa10037: mac0-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
@@ -56,7 +62,8 @@
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
 			phy-reset-gpios = <&gpio2 21 0>;
 			phy-reset-duration = <100>;
 			status = "okay";
@@ -68,6 +75,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 04b2f769ffbd..7087b4bf6a8f 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
@@ -22,119 +22,161 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10049
-					&hog_pins_cfa10049_pullup>;
+				usb_pins_cfa10049: usb-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2cmux_pins_cfa10049: i2cmux-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10049: mac0-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
 
-				hog_pins_cfa10049: hog-10049@0 {
+				pca_pins_cfa10049: pca-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
-						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SS0__GPIO_2_19
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
+				rotary_pins_cfa10049: rotary-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi2_pins_cfa10049: spi2-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
-						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
-						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				w1_gpio_pins: w1-gpio@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						MX28_PAD_LCD_D21__GPIO_1_21
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>; /* 0 will enable the keeper */
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
 				};
 			};
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049>;
+					     &lcdif_pins_cfa10049
+					     &lcdif_pins_cfa10049_pullup>;
 				display = <&display>;
 				status = "okay";
 
@@ -181,6 +223,8 @@
 				compatible = "i2c-mux-gpio";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2cmux_pins_cfa10049>;
 				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
 				i2c-parent = <&i2c1>;
 
@@ -203,6 +247,8 @@
 
 					pca9555: pca9555@20 {
 						compatible = "nxp,pca9555";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pca_pins_cfa10049>;
 						interrupt-parent = <&gpio2>;
 						interrupts = <19 0x2>;
 						gpio-controller;
@@ -239,6 +285,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10049>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -250,7 +298,8 @@
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10049>;
 			phy-reset-gpios = <&gpio2 21 0>;
 			phy-reset-duration = <100>;
 			status = "okay";
@@ -320,6 +369,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -333,6 +384,8 @@
 
 	rotary {
 		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
 		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
 		linux,axis = <1>; /* REL_Y */
 		rotary-encoder,relative-axis;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 158111244122..c3900e7ba331 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,7 +14,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
@@ -23,87 +23,75 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10055
-					&hog_pins_cfa10055_pullup>;
-
-				hog_pins_cfa10055: hog-10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+				lcdif_pins_cfa10055: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				lcdif_pins_cfa10055: lcdif-evk@0 {
+				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055>;
+					     &lcdif_pins_cfa10055
+					     &lcdif_pins_cfa10055_pullup>;
 				display = <&display>;
 				status = "okay";
 
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
new file mode 100644
index 000000000000..cef959a97219
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10056: spi2-cfa10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_pins_cfa10056: lcdif-10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						&lcdif_pins_cfa10056
+						&lcdif_pins_cfa10056_pullup >;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <32000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <5>;
+							vsync-len = <5>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713cdb42a..3c1312885ae0 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,7 +14,7 @@
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
@@ -23,73 +23,54 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10057
-					&hog_pins_cfa10057_pullup>;
-
-				hog_pins_cfa10057: hog-10057@0 {
+				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10057: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -164,6 +145,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
new file mode 100644
index 000000000000..2469d34df0ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10058: usb-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10058: lcdif-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						 &lcdif_pins_cfa10058>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <40>;
+							hfront-porch = <40>;
+							vback-porch = <13>;
+							vfront-porch = <29>;
+							hsync-len = <8>;
+							vsync-len = <8>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10058>;
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 15715d921d14..4267c2b05d60 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
@@ -70,52 +70,52 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
-						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
-						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
-						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio3_5: led_gpio3_5@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_evk: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -182,7 +182,12 @@
 			};
 
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+				fsl,ave-ctrl = <4>;
+				fsl,ave-delay = <2>;
+				fsl,settling = <10>;
 			};
 
 			i2c0: i2c@80058000 {
@@ -242,6 +247,8 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
new file mode 100644
index 000000000000..d3958da60bd7
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display>;
+				reset-active-high;
+				status = "okay";
+
+				display: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: vddio-sd1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 44d9da57736e..8e2477fbe1d7 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
@@ -92,26 +92,26 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
-						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
-						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
-						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_m28: lcdif-m28@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
-						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -235,6 +235,12 @@
 				pinctrl-0 = <&auart2_2pins_b>;
 				status = "okay";
 			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
@@ -270,6 +276,13 @@
 		};
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
new file mode 100644
index 000000000000..e11f69ba0fe4
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 6c6a5442800a..4870f07bf56a 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
@@ -29,13 +29,13 @@
 				hog_pins_a: hog-gpios@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
-						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
-						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 37be532f0055..be5a0550d58c 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,106 +1,139 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
 	compatible = "karo,tx28", "fsl,imx28";
 
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
 	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
+		reg = <0 0>; /* will be filled in by U-Boot */
+	};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				mac0_pins_gpio: mac0-gpio-mode@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 0>;
+		status = "disabled";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 18 0>;
+			enable-active-high;
 		};
 
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
 
-				ds1339: rtc@68 {
-					compatible = "mxim,ds1339";
-					reg = <0x68>;
-				};
-			};
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm0_pins_a>;
-				status = "okay";
-			};
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_4pins_a>;
-				status = "okay";
-			};
+		reg_can_xcvr: can-xcvr {
+			compatible = "regulator-fixed";
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-low;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+		};
 
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
+		reg_lcd: lcd-power {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 31 0>;
+			enable-active-high;
+		};
+
+		reg_lcd_reset: lcd-reset {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			startup-delay-us = <300000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default", "gpio_mode";
-			pinctrl-0 = <&mac0_pins_a>;
-			pinctrl-1 = <&mac0_pins_gpio>;
-			status = "okay";
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
 		};
 	};
 
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		user_led: user {
 			label = "Heartbeat";
 			gpios = <&gpio4 10 0>;
 			linux,default-trigger = "heartbeat";
@@ -109,8 +142,512 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 0
+			&gpio5 1 0
+			&gpio5 2 0
+			&gpio5 3 0
+		>;
+		row-gpios = <
+			&gpio5 4 0
+			&gpio5 5 0
+			&gpio5 6 0
+			&gpio5 7 0
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		linux,wakeup;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 0>;
+		pendown-gpio = <&gpio3 20 1>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
 	};
 };
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 9524a0571281..cda19c8b0a47 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,12 +9,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
 
 	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
@@ -27,8 +30,8 @@
 		serial2 = &auart2;
 		serial3 = &auart3;
 		serial4 = &auart4;
-		ethernet0 = &mac0;
-		ethernet1 = &mac1;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
 	};
 
 	cpus {
@@ -62,9 +65,9 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			hsadc@80002000 {
+			hsadc: hsadc@80002000 {
 				reg = <0x80002000 0x2000>;
-				interrupts = <13 87>;
+				interrupts = <13>;
 				dmas = <&dma_apbh 12>;
 				dma-names = "rx";
 				status = "disabled";
@@ -86,25 +89,24 @@
 				clocks = <&clks 25>;
 			};
 
-			perfmon@80006000 {
+			perfmon: perfmon@80006000 {
 				reg = <0x80006000 0x800>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
-			gpmi-nand@8000c000 {
+			gpmi: gpmi-nand@8000c000 {
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
-				interrupts = <88>, <41>;
-				interrupt-names = "gpmi-dma", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
-				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
@@ -112,11 +114,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
-				interrupts = <96 82>;
+				interrupts = <96>;
 				clocks = <&clks 46>;
 				dmas = <&dma_apbh 0>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
@@ -124,11 +125,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
-				interrupts = <97 83>;
+				interrupts = <97>;
 				clocks = <&clks 47>;
 				dmas = <&dma_apbh 1>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
@@ -136,11 +136,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
-				interrupts = <98 84>;
+				interrupts = <98>;
 				clocks = <&clks 48>;
 				dmas = <&dma_apbh 2>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
@@ -148,15 +147,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
-				interrupts = <99 85>;
+				interrupts = <99>;
 				clocks = <&clks 49>;
 				dmas = <&dma_apbh 3>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
 
-			pinctrl@80018000 {
+			pinctrl: pinctrl@80018000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-pinctrl", "simple-bus";
@@ -210,509 +208,590 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_pins_b: duart@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_4pins_a: duart-4pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_status_cfg: gpmi-status-cfg {
 					fsl,pinmux-ids = <
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
-						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
-						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_pins_a: auart1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
-						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
-						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_2pins_a: auart1-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_a: auart2-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
-						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_b: auart2-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
-						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
-						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
-						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_a: auart3-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
-						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_b: auart3-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart4_2pins_a: auart4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
-						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
-						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
-						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
-						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
-						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
-						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
-						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
-						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
-						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
-						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
-						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
-						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
-						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
-						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
-						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
-						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
-						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
 					fsl,pinmux-ids = <
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
 					fsl,pinmux-ids = <
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg: mmc2-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
-						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c0_pins_b: i2c0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
-						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c1_pins_a: i2c1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
-						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				pwm0_pins_a: pwm0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+						MX28_PAD_PWM0__PWM_0
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+						MX28_PAD_PWM2__PWM_2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_a: pwm3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+						MX28_PAD_PWM3__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_b: pwm3@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+						MX28_PAD_SAIF0_MCLK__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+						MX28_PAD_PWM4__PWM_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can1_pins_a: can1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_a: usbphy0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_b: usbphy0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy1_pins_a: usbphy1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
-			digctl@8001c000 {
+			digctl: digctl@8001c000 {
 				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
 			};
 
-			etm@80022000 {
+			etm: etm@80022000 {
 				reg = <0x80022000 0x2000>;
 				status = "disabled";
 			};
@@ -733,19 +812,19 @@
 				clocks = <&clks 26>;
 			};
 
-			dcp@80028000 {
+			dcp: dcp@80028000 {
 				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
 				compatible = "fsl-dcp";
 			};
 
-			pxp@8002a000 {
+			pxp: pxp@8002a000 {
 				reg = <0x8002a000 0x2000>;
 				interrupts = <39>;
 				status = "disabled";
 			};
 
-			ocotp@8002c000 {
+			ocotp: ocotp@8002c000 {
 				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
@@ -756,10 +835,10 @@
 				status = "disabled";
 			};
 
-			lcdif@80030000 {
+			lcdif: lcdif@80030000 {
 				compatible = "fsl,imx28-lcdif";
 				reg = <0x80030000 0x2000>;
-				interrupts = <38 86>;
+				interrupts = <38>;
 				clocks = <&clks 55>;
 				dmas = <&dma_apbh 13>;
 				dma-names = "rx";
@@ -784,41 +863,41 @@
 				status = "disabled";
 			};
 
-			simdbg@8003c000 {
+			simdbg: simdbg@8003c000 {
 				reg = <0x8003c000 0x200>;
 				status = "disabled";
 			};
 
-			simgpmisel@8003c200 {
+			simgpmisel: simgpmisel@8003c200 {
 				reg = <0x8003c200 0x100>;
 				status = "disabled";
 			};
 
-			simsspsel@8003c300 {
+			simsspsel: simsspsel@8003c300 {
 				reg = <0x8003c300 0x100>;
 				status = "disabled";
 			};
 
-			simmemsel@8003c400 {
+			simmemsel: simmemsel@8003c400 {
 				reg = <0x8003c400 0x100>;
 				status = "disabled";
 			};
 
-			gpiomon@8003c500 {
+			gpiomon: gpiomon@8003c500 {
 				reg = <0x8003c500 0x100>;
 				status = "disabled";
 			};
 
-			simenet@8003c700 {
+			simenet: simenet@8003c700 {
 				reg = <0x8003c700 0x100>;
 				status = "disabled";
 			};
 
-			armjtag@8003c800 {
+			armjtag: armjtag@8003c800 {
 				reg = <0x8003c800 0x100>;
 				status = "disabled";
 			};
-                };
+		};
 
 		apbx@80040000 {
 			compatible = "simple-bus";
@@ -836,16 +915,15 @@
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
-				interrupts = <59 80>;
+				interrupts = <59>;
 				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";
-				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
 
-			power@80044000 {
+			power: power@80044000 {
 				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
@@ -853,31 +931,31 @@
 			saif1: saif@80046000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80046000 0x2000>;
-				interrupts = <58 81>;
+				interrupts = <58>;
 				clocks = <&clks 54>;
 				dmas = <&dma_apbx 5>;
 				dma-names = "rx-tx";
-				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
-			lradc@80050000 {
+			lradc: lradc@80050000 {
 				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
 				interrupts = <10 14 15 16 17 18 19
 						20 21 22 23 24 25>;
 				status = "disabled";
+				clocks = <&clks 41>;
 			};
 
-			spdif@80054000 {
+			spdif: spdif@80054000 {
 				reg = <0x80054000 0x2000>;
-				interrupts = <45 66>;
+				interrupts = <45>;
 				dmas = <&dma_apbx 2>;
 				dma-names = "tx";
 				status = "disabled";
 			};
 
-			rtc@80056000 {
+			mxs_rtc: rtc@80056000 {
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
@@ -888,11 +966,10 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
 				reg = <0x80058000 0x2000>;
-				interrupts = <111 68>;
+				interrupts = <111>;
 				clock-frequency = <100000>;
 				dmas = <&dma_apbx 6>;
 				dma-names = "rx-tx";
-				fsl,i2c-dma-channel = <6>;
 				status = "disabled";
 			};
 
@@ -901,11 +978,10 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
 				reg = <0x8005a000 0x2000>;
-				interrupts = <110 69>;
+				interrupts = <110>;
 				clock-frequency = <100000>;
 				dmas = <&dma_apbx 7>;
 				dma-names = "rx-tx";
-				fsl,i2c-dma-channel = <7>;
 				status = "disabled";
 			};
 
@@ -918,7 +994,7 @@
 				status = "disabled";
 			};
 
-			timrot@80068000 {
+			timer: timrot@80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
@@ -928,10 +1004,9 @@
 			auart0: serial@8006a000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
-				interrupts = <112 70 71>;
+				interrupts = <112>;
 				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 				dma-names = "rx", "tx";
-				fsl,auart-dma-channel = <8 9>;
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -939,7 +1014,7 @@
 			auart1: serial@8006c000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
-				interrupts = <113 72 73>;
+				interrupts = <113>;
 				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -949,7 +1024,7 @@
 			auart2: serial@8006e000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
-				interrupts = <114 74 75>;
+				interrupts = <114>;
 				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -959,7 +1034,7 @@
 			auart3: serial@80070000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
-				interrupts = <115 76 77>;
+				interrupts = <115>;
 				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -969,7 +1044,7 @@
 			auart4: serial@80072000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
-				interrupts = <116 78 79>;
+				interrupts = <116>;
 				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -1026,7 +1101,7 @@
 			status = "disabled";
 		};
 
-		dflpt@800c0000 {
+		dflpt: dflpt@800c0000 {
 			reg = <0x800c0000 0x10000>;
 			status = "disabled";
 		};
@@ -1049,10 +1124,9 @@
 			status = "disabled";
 		};
 
-		switch@800f8000 {
+		etn_switch: switch@800f8000 {
 			reg = <0x800f8000 0x8000>;
 			status = "disabled";
 		};
-
 	};
 };
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c5449257ad9a..c34f82581248 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -20,6 +20,16 @@
 		serial4 = &uart5;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
 	avic: avic-interrupt-controller@60000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
@@ -94,6 +104,13 @@
 				status = "disabled";
 			};
 
+			iim: iim@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+
 			clks: ccm@53f80000{
 				compatible = "fsl,imx31-ccm";
 				reg = <0x53f80000 0x4000>;
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index 8f7f9ac0b989..b3606993f2e8 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -26,10 +26,6 @@
 	};
 
 	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-
 		osc {
 			clock-frequency = <33554432>;
 		};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 123fe84e0e8c..5a7f552786a1 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -16,6 +16,33 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ad3471ca17c7..be1407cf5abd 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -27,6 +27,20 @@
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: dvi {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 
 	display@di1 {
@@ -35,6 +49,25 @@
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -63,6 +96,10 @@
 	};
 
 	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
 		clk_26M: codec_clock {
 			compatible = "fixed-clock";
 			reg=<0>;
@@ -91,7 +128,7 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
@@ -108,6 +145,7 @@
 		#size-cells = <0>;
 		compatible = "fsl,mc13892";
 		spi-max-frequency = <6000000>;
+		spi-cs-high;
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0x4>;
@@ -247,7 +285,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 25764b505a61..f4dcff3a9969 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -15,13 +15,18 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
 	};
 
 	tzic: tz-interrupt-controller@e0000000 {
@@ -42,7 +47,7 @@
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <22579200>;
+			clock-frequency = <0>;
 		};
 
 		ckih2 {
@@ -81,6 +86,11 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		iram: iram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
 		ipu: ipu@40000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx51-ipu";
@@ -149,6 +159,9 @@
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
@@ -300,275 +313,6 @@
 			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_1: audmuxgrp-1 {
-						fsl,pins = <
-							MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
-							MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
-							MX51_PAD_AUD3_BB_CK__AUD3_TXC  0x80000000
-							MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				fec {
-					pinctrl_fec_1: fecgrp-1 {
-						fsl,pins = <
-							MX51_PAD_EIM_EB2__FEC_MDIO	   0x80000000
-							MX51_PAD_EIM_EB3__FEC_RDATA1	   0x80000000
-							MX51_PAD_EIM_CS2__FEC_RDATA2	   0x80000000
-							MX51_PAD_EIM_CS3__FEC_RDATA3	   0x80000000
-							MX51_PAD_EIM_CS4__FEC_RX_ER	   0x80000000
-							MX51_PAD_EIM_CS5__FEC_CRS	   0x80000000
-							MX51_PAD_NANDF_RB2__FEC_COL	   0x80000000
-							MX51_PAD_NANDF_RB3__FEC_RX_CLK	   0x80000000
-							MX51_PAD_NANDF_D9__FEC_RDATA0	   0x80000000
-							MX51_PAD_NANDF_D8__FEC_TDATA0	   0x80000000
-							MX51_PAD_NANDF_CS2__FEC_TX_ER	   0x80000000
-							MX51_PAD_NANDF_CS3__FEC_MDC	   0x80000000
-							MX51_PAD_NANDF_CS4__FEC_TDATA1	   0x80000000
-							MX51_PAD_NANDF_CS5__FEC_TDATA2	   0x80000000
-							MX51_PAD_NANDF_CS6__FEC_TDATA3	   0x80000000
-							MX51_PAD_NANDF_CS7__FEC_TX_EN	   0x80000000
-							MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
-						>;
-					};
-
-					pinctrl_fec_2: fecgrp-2 {
-						fsl,pins = <
-							MX51_PAD_DI_GP3__FEC_TX_ER	  0x80000000
-							MX51_PAD_DI2_PIN4__FEC_CRS	  0x80000000
-							MX51_PAD_DI2_PIN2__FEC_MDC	  0x80000000
-							MX51_PAD_DI2_PIN3__FEC_MDIO	  0x80000000
-							MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
-							MX51_PAD_DI_GP4__FEC_RDATA2	  0x80000000
-							MX51_PAD_DISP2_DAT0__FEC_RDATA3   0x80000000
-							MX51_PAD_DISP2_DAT1__FEC_RX_ER	  0x80000000
-							MX51_PAD_DISP2_DAT6__FEC_TDATA1	  0x80000000
-							MX51_PAD_DISP2_DAT7__FEC_TDATA2	  0x80000000
-							MX51_PAD_DISP2_DAT8__FEC_TDATA3	  0x80000000
-							MX51_PAD_DISP2_DAT9__FEC_TX_EN	  0x80000000
-							MX51_PAD_DISP2_DAT10__FEC_COL	  0x80000000
-							MX51_PAD_DISP2_DAT11__FEC_RX_CLK  0x80000000
-							MX51_PAD_DISP2_DAT12__FEC_RX_DV	  0x80000000
-							MX51_PAD_DISP2_DAT13__FEC_TX_CLK  0x80000000
-							MX51_PAD_DISP2_DAT14__FEC_RDATA0  0x80000000
-							MX51_PAD_DISP2_DAT15__FEC_TDATA0  0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
-							MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
-							MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
-						>;
-					};
-				};
-
-				ecspi2 {
-					pinctrl_ecspi2_1: ecspi2grp-1 {
-						fsl,pins = <
-							MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
-							MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
-							MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
-						>;
-					};
-				};
-
-				esdhc1 {
-					pinctrl_esdhc1_1: esdhc1grp-1 {
-						fsl,pins = <
-							MX51_PAD_SD1_CMD__SD1_CMD     0x400020d5
-							MX51_PAD_SD1_CLK__SD1_CLK     0x20d5
-							MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
-							MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
-							MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
-							MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
-						>;
-					};
-				};
-
-				esdhc2 {
-					pinctrl_esdhc2_1: esdhc2grp-1 {
-						fsl,pins = <
-							MX51_PAD_SD2_CMD__SD2_CMD     0x400020d5
-							MX51_PAD_SD2_CLK__SD2_CLK     0x20d5
-							MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
-							MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
-							MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
-							MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
-							MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
-						>;
-					};
-
-					pinctrl_i2c2_2: i2c2grp-2 {
-						fsl,pins = <
-							MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
-							MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
-						>;
-					};
-				};
-
-				ipu_disp1 {
-					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
-						fsl,pins = <
-							MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
-							MX51_PAD_DISP1_DAT1__DISP1_DAT1   0x5
-							MX51_PAD_DISP1_DAT2__DISP1_DAT2   0x5
-							MX51_PAD_DISP1_DAT3__DISP1_DAT3   0x5
-							MX51_PAD_DISP1_DAT4__DISP1_DAT4   0x5
-							MX51_PAD_DISP1_DAT5__DISP1_DAT5   0x5
-							MX51_PAD_DISP1_DAT6__DISP1_DAT6   0x5
-							MX51_PAD_DISP1_DAT7__DISP1_DAT7   0x5
-							MX51_PAD_DISP1_DAT8__DISP1_DAT8   0x5
-							MX51_PAD_DISP1_DAT9__DISP1_DAT9   0x5
-							MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
-							MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
-							MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
-							MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
-							MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
-							MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
-							MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
-							MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
-							MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
-							MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
-							MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
-							MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
-							MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
-							MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
-							MX51_PAD_DI1_PIN2__DI1_PIN2	  0x5 /* hsync */
-							MX51_PAD_DI1_PIN3__DI1_PIN3	  0x5 /* vsync */
-						>;
-					};
-				};
-
-				ipu_disp2 {
-					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
-						fsl,pins = <
-							MX51_PAD_DISP2_DAT0__DISP2_DAT0     0x5
-							MX51_PAD_DISP2_DAT1__DISP2_DAT1     0x5
-							MX51_PAD_DISP2_DAT2__DISP2_DAT2     0x5
-							MX51_PAD_DISP2_DAT3__DISP2_DAT3     0x5
-							MX51_PAD_DISP2_DAT4__DISP2_DAT4     0x5
-							MX51_PAD_DISP2_DAT5__DISP2_DAT5     0x5
-							MX51_PAD_DISP2_DAT6__DISP2_DAT6     0x5
-							MX51_PAD_DISP2_DAT7__DISP2_DAT7     0x5
-							MX51_PAD_DISP2_DAT8__DISP2_DAT8     0x5
-							MX51_PAD_DISP2_DAT9__DISP2_DAT9     0x5
-							MX51_PAD_DISP2_DAT10__DISP2_DAT10   0x5
-							MX51_PAD_DISP2_DAT11__DISP2_DAT11   0x5
-							MX51_PAD_DISP2_DAT12__DISP2_DAT12   0x5
-							MX51_PAD_DISP2_DAT13__DISP2_DAT13   0x5
-							MX51_PAD_DISP2_DAT14__DISP2_DAT14   0x5
-							MX51_PAD_DISP2_DAT15__DISP2_DAT15   0x5
-							MX51_PAD_DI2_PIN2__DI2_PIN2	    0x5 /* hsync */
-							MX51_PAD_DI2_PIN3__DI2_PIN3	    0x5 /* vsync */
-							MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
-							MX51_PAD_DI_GP4__DI2_PIN15	    0x5
-						>;
-					};
-				};
-
-				pata {
-					pinctrl_pata_1: patagrp-1 {
-						fsl,pins = <
-							MX51_PAD_NANDF_WE_B__PATA_DIOW		0x2004
-							MX51_PAD_NANDF_RE_B__PATA_DIOR		0x2004
-							MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	0x2004
-							MX51_PAD_NANDF_CLE__PATA_RESET_B	0x2004
-							MX51_PAD_NANDF_WP_B__PATA_DMACK		0x2004
-							MX51_PAD_NANDF_RB0__PATA_DMARQ		0x2004
-							MX51_PAD_NANDF_RB1__PATA_IORDY		0x2004
-							MX51_PAD_GPIO_NAND__PATA_INTRQ		0x2004
-							MX51_PAD_NANDF_CS2__PATA_CS_0		0x2004
-							MX51_PAD_NANDF_CS3__PATA_CS_1		0x2004
-							MX51_PAD_NANDF_CS4__PATA_DA_0		0x2004
-							MX51_PAD_NANDF_CS5__PATA_DA_1		0x2004
-							MX51_PAD_NANDF_CS6__PATA_DA_2		0x2004
-							MX51_PAD_NANDF_D15__PATA_DATA15		0x2004
-							MX51_PAD_NANDF_D14__PATA_DATA14		0x2004
-							MX51_PAD_NANDF_D13__PATA_DATA13		0x2004
-							MX51_PAD_NANDF_D12__PATA_DATA12		0x2004
-							MX51_PAD_NANDF_D11__PATA_DATA11		0x2004
-							MX51_PAD_NANDF_D10__PATA_DATA10		0x2004
-							MX51_PAD_NANDF_D9__PATA_DATA9		0x2004
-							MX51_PAD_NANDF_D8__PATA_DATA8		0x2004
-							MX51_PAD_NANDF_D7__PATA_DATA7		0x2004
-							MX51_PAD_NANDF_D6__PATA_DATA6		0x2004
-							MX51_PAD_NANDF_D5__PATA_DATA5		0x2004
-							MX51_PAD_NANDF_D4__PATA_DATA4		0x2004
-							MX51_PAD_NANDF_D3__PATA_DATA3		0x2004
-							MX51_PAD_NANDF_D2__PATA_DATA2		0x2004
-							MX51_PAD_NANDF_D1__PATA_DATA1		0x2004
-							MX51_PAD_NANDF_D0__PATA_DATA0		0x2004
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
-							MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
-							MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
-							MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
-							MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
-						>;
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3_1: uart3grp-1 {
-						fsl,pins = <
-							MX51_PAD_EIM_D25__UART3_RXD 0x1c5
-							MX51_PAD_EIM_D26__UART3_TXD 0x1c5
-							MX51_PAD_EIM_D27__UART3_RTS 0x1c5
-							MX51_PAD_EIM_D24__UART3_CTS 0x1c5
-						>;
-					};
-
-					pinctrl_uart3_2: uart3grp-2 {
-						fsl,pins = <
-							MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
-							MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
-						>;
-					};
-				};
-
-				kpp {
-					pinctrl_kpp_1: kppgrp-1 {
-						fsl,pins = <
-							MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
-							MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
-							MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
-							MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
-							MX51_PAD_KEY_COL0__KEY_COL0 0xe8
-							MX51_PAD_KEY_COL1__KEY_COL1 0xe8
-							MX51_PAD_KEY_COL2__KEY_COL2 0xe8
-							MX51_PAD_KEY_COL3__KEY_COL3 0xe8
-						>;
-					};
-				};
 			};
 
 			pwm1: pwm@73fb4000 {
@@ -628,6 +372,21 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
+			iim: iim@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+				reg = <0x83f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks 107>;
+			};
+
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -645,6 +404,7 @@
 				interrupts = <6>;
 				clocks = <&clks 56>, <&clks 56>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
@@ -684,6 +444,9 @@
 				reg = <0x83fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 48>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -695,6 +458,23 @@
 				status = "disabled";
 			};
 
+			weim: weim@83fda000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-weim";
+				reg = <0x83fda000 0x1000>;
+				clocks = <&clks 57>;
+				ranges = <
+					0 0 0xb0000000 0x08000000
+					1 0 0xb8000000 0x08000000
+					2 0 0xc0000000 0x08000000
+					3 0 0xc8000000 0x04000000
+					4 0 0xcc000000 0x02000000
+					5 0 0xce000000 0x02000000
+				>;
+				status = "disabled";
+			};
+
 			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
@@ -707,7 +487,7 @@
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 161>;
+				clocks = <&clks 172>;
 				status = "disabled";
 			};
 
@@ -716,6 +496,9 @@
 				reg = <0x83fe8000 0x4000>;
 				interrupts = <96>;
 				clocks = <&clks 50>;
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -732,3 +515,329 @@
 		};
 	};
 };
+
+&iomuxc {
+	audmux {
+		pinctrl_audmux_1: audmuxgrp-1 {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC  0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+			>;
+		};
+	};
+
+	fec {
+		pinctrl_fec_1: fecgrp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO	   0x80000000
+				MX51_PAD_EIM_EB3__FEC_RDATA1	   0x80000000
+				MX51_PAD_EIM_CS2__FEC_RDATA2	   0x80000000
+				MX51_PAD_EIM_CS3__FEC_RDATA3	   0x80000000
+				MX51_PAD_EIM_CS4__FEC_RX_ER	   0x80000000
+				MX51_PAD_EIM_CS5__FEC_CRS	   0x80000000
+				MX51_PAD_NANDF_RB2__FEC_COL	   0x80000000
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK	   0x80000000
+				MX51_PAD_NANDF_D9__FEC_RDATA0	   0x80000000
+				MX51_PAD_NANDF_D8__FEC_TDATA0	   0x80000000
+				MX51_PAD_NANDF_CS2__FEC_TX_ER	   0x80000000
+				MX51_PAD_NANDF_CS3__FEC_MDC	   0x80000000
+				MX51_PAD_NANDF_CS4__FEC_TDATA1	   0x80000000
+				MX51_PAD_NANDF_CS5__FEC_TDATA2	   0x80000000
+				MX51_PAD_NANDF_CS6__FEC_TDATA3	   0x80000000
+				MX51_PAD_NANDF_CS7__FEC_TX_EN	   0x80000000
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
+			>;
+		};
+
+		pinctrl_fec_2: fecgrp-2 {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER	  0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS	  0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC	  0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO	  0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2	  0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3   0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER	  0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1	  0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2	  0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3	  0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN	  0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL	  0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK  0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV	  0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK  0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0  0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0  0x80000000
+			>;
+		};
+	};
+
+	ecspi1 {
+		pinctrl_ecspi1_1: ecspi1grp-1 {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+			>;
+		};
+	};
+
+	ecspi2 {
+		pinctrl_ecspi2_1: ecspi2grp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+				MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+				MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+			>;
+		};
+	};
+
+	esdhc1 {
+		pinctrl_esdhc1_1: esdhc1grp-1 {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD     0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK     0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+			>;
+		};
+	};
+
+	esdhc2 {
+		pinctrl_esdhc2_1: esdhc2grp-1 {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD     0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK     0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+			>;
+		};
+	};
+
+	i2c2 {
+		pinctrl_i2c2_1: i2c2grp-1 {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_2: i2c2grp-2 {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
+				MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_3: i2c2grp-3 {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
+			>;
+		};
+	};
+
+	ipu_disp1 {
+		pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1	  0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2	  0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3	  0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4	  0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5	  0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6	  0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7	  0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8	  0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9	  0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2	  0x5 /* hsync */
+				MX51_PAD_DI1_PIN3__DI1_PIN3	  0x5 /* vsync */
+			>;
+		};
+	};
+
+	ipu_disp2 {
+		pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0	    0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1	    0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2	    0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3	    0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4	    0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5	    0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6	    0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7	    0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8	    0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9	    0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10   0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11   0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12   0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13   0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14   0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15   0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2	    0x5 /* hsync */
+				MX51_PAD_DI2_PIN3__DI2_PIN3	    0x5 /* vsync */
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
+				MX51_PAD_DI_GP4__DI2_PIN15	    0x5 /* DE */
+			>;
+		};
+	};
+
+	kpp {
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0 0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1 0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2 0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3 0xe8
+			>;
+		};
+	};
+
+	pata {
+		pinctrl_pata_1: patagrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_WE_B__PATA_DIOW	   0x2004
+				MX51_PAD_NANDF_RE_B__PATA_DIOR	   0x2004
+				MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
+				MX51_PAD_NANDF_CLE__PATA_RESET_B   0x2004
+				MX51_PAD_NANDF_WP_B__PATA_DMACK	   0x2004
+				MX51_PAD_NANDF_RB0__PATA_DMARQ	   0x2004
+				MX51_PAD_NANDF_RB1__PATA_IORDY	   0x2004
+				MX51_PAD_GPIO_NAND__PATA_INTRQ	   0x2004
+				MX51_PAD_NANDF_CS2__PATA_CS_0	   0x2004
+				MX51_PAD_NANDF_CS3__PATA_CS_1	   0x2004
+				MX51_PAD_NANDF_CS4__PATA_DA_0	   0x2004
+				MX51_PAD_NANDF_CS5__PATA_DA_1	   0x2004
+				MX51_PAD_NANDF_CS6__PATA_DA_2	   0x2004
+				MX51_PAD_NANDF_D15__PATA_DATA15	   0x2004
+				MX51_PAD_NANDF_D14__PATA_DATA14	   0x2004
+				MX51_PAD_NANDF_D13__PATA_DATA13	   0x2004
+				MX51_PAD_NANDF_D12__PATA_DATA12	   0x2004
+				MX51_PAD_NANDF_D11__PATA_DATA11	   0x2004
+				MX51_PAD_NANDF_D10__PATA_DATA10	   0x2004
+				MX51_PAD_NANDF_D9__PATA_DATA9	   0x2004
+				MX51_PAD_NANDF_D8__PATA_DATA8	   0x2004
+				MX51_PAD_NANDF_D7__PATA_DATA7	   0x2004
+				MX51_PAD_NANDF_D6__PATA_DATA6	  0x2004
+				MX51_PAD_NANDF_D5__PATA_DATA5	  0x2004
+				MX51_PAD_NANDF_D4__PATA_DATA4	  0x2004
+				MX51_PAD_NANDF_D3__PATA_DATA3	  0x2004
+				MX51_PAD_NANDF_D2__PATA_DATA2	  0x2004
+				MX51_PAD_NANDF_D1__PATA_DATA1	  0x2004
+				MX51_PAD_NANDF_D0__PATA_DATA0	  0x2004
+			>;
+		};
+	};
+
+	uart1 {
+		pinctrl_uart1_1: uart1grp-1 {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart1_rtscts_1: uart1rtscts-1 {
+			fsl,pins = <
+				MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+			>;
+		};
+	};
+
+	uart2 {
+		pinctrl_uart2_1: uart2grp-1 {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+			>;
+		};
+	};
+
+	uart3 {
+		pinctrl_uart3_1: uart3grp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts_1: uart3rtscts-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_2: uart3grp-2 {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+			>;
+		};
+	};
+
+	usbh1 {
+		pinctrl_usbh1_1: usbh1grp-1 {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK	  0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR	  0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT	  0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP	  0x1e5
+			>;
+		};
+	};
+
+	usbh2 {
+		pinctrl_usbh2_1: usbh2grp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
+				MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
+				MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
+				MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
+				MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
+				MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
+				MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
+				MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
+				MX51_PAD_EIM_A24__USBH2_CLK   0x1e5
+				MX51_PAD_EIM_A25__USBH2_DIR   0x1e5
+				MX51_PAD_EIM_A27__USBH2_NXT   0x1e5
+				MX51_PAD_EIM_A26__USBH2_STP   0x1e5
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 512a1f608253..91a5935a4aac 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -55,19 +55,20 @@
 			label = "Power Button";
 			gpios = <&gpio1 8 0>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
 		};
 	};
 
@@ -93,6 +94,15 @@
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
+
+		reg_usb_vbus: usb_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
@@ -113,7 +123,6 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio3 13 0>;
 	status = "okay";
 };
 
@@ -127,6 +136,7 @@
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
 	status = "okay";
 };
 
@@ -143,8 +153,8 @@
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
 				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
 			>;
 		};
@@ -297,10 +307,17 @@
 	status = "okay";
 };
 
+&vpu {
+	status = "okay";
+};
+
 &usbh1 {
-       status = "okay";
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
 };
 
 &usbotg {
-       status = "okay";
+	dr_mode = "peripheral";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 569aa9f2c4ed..4307e80b2d2e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -15,11 +15,6 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -30,6 +25,24 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
@@ -140,6 +153,9 @@
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
@@ -957,6 +973,13 @@
 			reg = <0x60000000 0x10000000>;
 			ranges;
 
+			iim: iim@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks 107>;
+			};
+
 			uart5: serial@63f90000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x63f90000 0x4000>;
@@ -990,6 +1013,7 @@
 				interrupts = <6>;
 				clocks = <&clks 56>, <&clks 56>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
@@ -1029,6 +1053,9 @@
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 48>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1053,6 +1080,9 @@
 				reg = <0x63fe8000 0x4000>;
 				interrupts = <96>;
 				clocks = <&clks 50>;
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1076,6 +1106,22 @@
 				crtcs = <&ipu 1>;
 				status = "disabled";
 			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks 63>, <&clks 63>;
+				clock-names = "per", "ahb";
+				iram = <&ocram>;
+				status = "disabled";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks 186>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index 9aab950ec269..b81a7a4ebab6 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -14,1072 +14,1076 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
-#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6DL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6DL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6DL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
-#define MX6DL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
-#define MX6DL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
-#define MX6DL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
-#define MX6DL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6DL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6DL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
-#define MX6DL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6DL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
-#define MX6DL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
-#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
-#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
-#define MX6DL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
-#define MX6DL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
-#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
-#define MX6DL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
-#define MX6DL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
-#define MX6DL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
-#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
-#define MX6DL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
-#define MX6DL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
-#define MX6DL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
-#define MX6DL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
-#define MX6DL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
-#define MX6DL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
-#define MX6DL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
-#define MX6DL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
-#define MX6DL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
-#define MX6DL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
-#define MX6DL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
-#define MX6DL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
-#define MX6DL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
-#define MX6DL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
-#define MX6DL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
-#define MX6DL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
-#define MX6DL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
-#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
-#define MX6DL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
-#define MX6DL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
-#define MX6DL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
-#define MX6DL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
-#define MX6DL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
-#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
-#define MX6DL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6DL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
-#define MX6DL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
-#define MX6DL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
-#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6DL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
-#define MX6DL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
-#define MX6DL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
-#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6DL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6DL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6DL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6DL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6DL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
-#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
-#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
-#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
-#define MX6DL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
-#define MX6DL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
-#define MX6DL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
-#define MX6DL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6DL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
-#define MX6DL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
-#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
-#define MX6DL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6DL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
-#define MX6DL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
-#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6DL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
-#define MX6DL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
-#define MX6DL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
-#define MX6DL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
-#define MX6DL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6DL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
-#define MX6DL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
-#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
-#define MX6DL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
-#define MX6DL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6DL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
-#define MX6DL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
-#define MX6DL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
-#define MX6DL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
-#define MX6DL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
-#define MX6DL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
-#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
-#define MX6DL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
-#define MX6DL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
-#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
-#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6DL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
-#define MX6DL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
-#define MX6DL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
-#define MX6DL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
-#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
-#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
-#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
-#define MX6DL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
-#define MX6DL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
-#define MX6DL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
-#define MX6DL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
-#define MX6DL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
-#define MX6DL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
-#define MX6DL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
-#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
-#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
-#define MX6DL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
-#define MX6DL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
-#define MX6DL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
-#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
-#define MX6DL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
-#define MX6DL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
-#define MX6DL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
-#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
-#define MX6DL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
-#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
-#define MX6DL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
-#define MX6DL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
-#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
-#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
-#define MX6DL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
-#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
-#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
-#define MX6DL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
-#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
-#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
-#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
-#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
-#define MX6DL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
-#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
-#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
-#define MX6DL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
-#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
-#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
-#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
-#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6DL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6DL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6DL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6DL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6DL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6DL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6DL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6DL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6DL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6DL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
-#define MX6DL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6DL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6DL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
-#define MX6DL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6DL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
-#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
-#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
-#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
-#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
-#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
-#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
-#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
-#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
-#define MX6DL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
-#define MX6DL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
-#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
-#define MX6DL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
-#define MX6DL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
-#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
-#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
-#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
-#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
 
 #endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index 95da71185a4a..a6ce7b487ad7 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -15,25 +15,3 @@
 	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
 	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6DL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6DL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
index 8989df2b89e5..1e45f2f9d0b6 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -15,22 +15,3 @@
 	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
 	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6DL_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6DL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index bfc59c3566a4..e672891c1626 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -10,6 +10,7 @@
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-wandboard.dtsi"
 
 / {
 	model = "Wandboard i.MX6 Dual Lite Board";
@@ -19,26 +20,3 @@
 		reg = <0x10000000 0x40000000>;
 	};
 };
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 2b3ecd679350..9e8ae118fdd4 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -8,8 +8,8 @@
  *
  */
 
-#include "imx6qdl.dtsi"
 #include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
 
 / {
 	cpus {
@@ -32,238 +32,15 @@
 	};
 
 	soc {
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks 142>;
+		};
+
 		aips1: aips-bus@02000000 {
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
-				reg = <0x020e0000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6DL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6DL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6DL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6DL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6DL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6DL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6DL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp_2 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
-
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
-
-					pinctrl_weim_nor_1: weim_norgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6DL_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6DL_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6DL_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6DL_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6DL_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6DL_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6DL_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6DL_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6DL_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6DL_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6DL_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6DL_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6DL_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6DL_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6DL_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6DL_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6DL_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
-					};
-
-				};
-
 			};
 
 			pxp: pxp@020f0000 {
@@ -294,3 +71,20 @@
 		};
 	};
 };
+
+&ldb {
+	clocks = <&clks 33>, <&clks 34>,
+		 <&clks 39>, <&clks 40>,
+		 <&clks 135>, <&clks 136>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+
+	lvds-channel@1 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 4e54fde591bd..edf1bd967164 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -57,7 +57,7 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000
+				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
 			>;
 		};
 	};
@@ -65,8 +65,8 @@
 	arm2 {
 		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
 			>;
 		};
 	};
@@ -97,6 +97,14 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_2>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index f5e1981025ed..1a3b50d4d8fa 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -20,6 +20,110 @@
 	};
 };
 
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_1>;
+	status = "okay";
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+
+	flash@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -27,7 +131,9 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
 			>;
 		};
 	};
@@ -35,8 +141,8 @@
 	pfla02 {
 		pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
 			fsl,pins = <
-				MX6Q_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
-				MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index faea6e1ada00..97ed0816a6e0 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -14,1028 +14,1032 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
-#define MX6Q_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
-#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
-#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
-#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
-#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
-#define MX6Q_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
-#define MX6Q_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
-#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
-#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
-#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
-#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
-#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
-#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
-#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
-#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
-#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
-#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
-#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
-#define MX6Q_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
-#define MX6Q_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6Q_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6Q_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6Q_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6Q_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
-#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6Q_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6Q_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6Q_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6Q_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6Q_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6Q_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6Q_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6Q_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6Q_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6Q_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6Q_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6Q_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6Q_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6Q_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6Q_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6Q_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6Q_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6Q_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6Q_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6Q_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6Q_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6Q_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6Q_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6Q_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6Q_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6Q_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6Q_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6Q_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6Q_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6Q_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6Q_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6Q_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6Q_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6Q_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6Q_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
-#define MX6Q_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
-#define MX6Q_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
-#define MX6Q_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
-#define MX6Q_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
-#define MX6Q_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
-#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
-#define MX6Q_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
-#define MX6Q_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
-#define MX6Q_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
-#define MX6Q_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
-#define MX6Q_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
-#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x000 0x0 0x0
-#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
-#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6Q_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6Q_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6Q_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6Q_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
-#define MX6Q_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6Q_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
-#define MX6Q_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6Q_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
-#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
-#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
-#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
-#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6Q_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
-#define MX6Q_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
-#define MX6Q_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6Q_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
-#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
-#define MX6Q_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
-#define MX6Q_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
-#define MX6Q_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
-#define MX6Q_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6Q_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
-#define MX6Q_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6Q_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
-#define MX6Q_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
-#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
-#define MX6Q_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
-#define MX6Q_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
-#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
-#define MX6Q_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
-#define MX6Q_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
-#define MX6Q_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
-#define MX6Q_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
-#define MX6Q_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
-#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
-#define MX6Q_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
-#define MX6Q_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
-#define MX6Q_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6Q_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6Q_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
-#define MX6Q_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
-#define MX6Q_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
-#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
-#define MX6Q_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
-#define MX6Q_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
-#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
-#define MX6Q_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
-#define MX6Q_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
-#define MX6Q_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
-#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
-#define MX6Q_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
-#define MX6Q_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
-#define MX6Q_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
-#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
-#define MX6Q_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
-#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
-#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
-#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
-#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
-#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6Q_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6Q_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6Q_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6Q_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6Q_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6Q_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
-#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
-#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
-#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
-#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
-#define MX6Q_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
-#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
-#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
-#define MX6Q_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
-#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
-#define MX6Q_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
-#define MX6Q_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
-#define MX6Q_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
-#define MX6Q_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
-#define MX6Q_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
-#define MX6Q_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
-#define MX6Q_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
-#define MX6Q_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
-#define MX6Q_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
-#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
 
 #endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 09a75807bc6d..334b9247e78c 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -20,24 +20,6 @@
 	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6Q_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 6a000666c147..f004913f7d80 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,6 +65,12 @@
 	};
 };
 
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -79,9 +85,27 @@
 	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	status = "okay";
+};
+
+&i2c1 {
 	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
 };
 
 &iomuxc {
@@ -91,36 +115,69 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6Q_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6Q_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
 	};
 };
 
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&sata {
 	status = "okay";
 };
 
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
 &usbh1 {
 	status = "okay";
 };
 
-&fec {
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -141,30 +198,3 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 169>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 0038228c508c..9cbdfe7a0931 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -20,21 +20,6 @@
 	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6Q_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
new file mode 100644
index 000000000000..6e1ccdc019a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
new file mode 100644
index 000000000000..36be17f207b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ba09dc32324e..f024ef28b34b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -8,8 +8,8 @@
  *
  */
 
-#include "imx6qdl.dtsi"
 #include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
 
 / {
 	cpus {
@@ -61,6 +61,12 @@
 	};
 
 	soc {
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x40000>;
+			clocks = <&clks 142>;
+		};
+
 		aips-bus@02000000 { /* AIPS1 */
 			spba-bus@02000000 {
 				ecspi5: ecspi@02018000 {
@@ -77,357 +83,54 @@
 
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
-				reg = <0x020e0000 0x4000>;
-
-				/* shared pinctrl settings */
-				audmux {
-					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_DAT0__AUD4_RXD  0x80000000
-							MX6Q_PAD_SD2_DAT3__AUD4_TXC  0x80000000
-							MX6Q_PAD_SD2_DAT2__AUD4_TXD  0x80000000
-							MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-						>;
-					};
-
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6Q_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6Q_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				ecspi3 {
-					pinctrl_ecspi3_1: ecspi3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
-							MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
-							MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6Q_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6Q_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6Q_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6Q_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-
-					pinctrl_enet_3: enetgrp-3 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6Q_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6Q_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6Q_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6Q_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6Q_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6Q_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6Q_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6Q_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6Q_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6Q_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6Q_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6Q_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6Q_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6Q_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6Q_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6Q_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6Q_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-						>;
-					};
 
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+				ipu2 {
+					pinctrl_ipu2_1: ipu2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
+							MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0x10
+							MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0x10
+							MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0x10
+							MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04        0x80000000
+							MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0x10
+							MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0x10
+							MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0x10
+							MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0x10
+							MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0x10
+							MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0x10
+							MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0x10
+							MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0x10
+							MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0x10
+							MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0x10
+							MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0x10
+							MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0x10
+							MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0x10
+							MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0x10
+							MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0x10
+							MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0x10
+							MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16  0x10
+							MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17  0x10
+							MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18  0x10
+							MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19  0x10
+							MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20  0x10
+							MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21  0x10
+							MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22  0x10
+							MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23  0x10
 						>;
 					};
 				};
-
-				i2c3 {
-					pinctrl_i2c3_1: i2c3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-							MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_1: usbotggrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6Q_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc2_2: usdhc2grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6Q_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
-						>;
-					};
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6Q_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6Q_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
-
-				usdhc4 {
-					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6Q_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
-							MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059
-							MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059
-							MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059
-							MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc4_2: usdhc4grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6Q_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
-						>;
-					};
-				};
-
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
-
-					pinctrl_weim_nor_1: weimnorgrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6Q_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6Q_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6Q_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6Q_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6Q_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6Q_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6Q_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6Q_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6Q_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6Q_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6Q_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6Q_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6Q_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6Q_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6Q_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6Q_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6Q_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
-					};
-
-				};
 			};
 		};
 
+		sata: sata@02200000 {
+			compatible = "fsl,imx6q-ahci";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 39 0x04>;
+			clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
 		ipu2: ipu@02800000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx6q-ipu";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e994011220e7..ff6f1e8f2dd9 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -45,6 +45,29 @@
 	status = "okay";
 };
 
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+	};
+
+	ecspi1 {
+		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+	};
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
@@ -52,8 +75,10 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e5dfdb32416..e75e11b36dff 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -27,6 +27,15 @@
 			enable-active-high;
 		};
 
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+		};
+
 		reg_audio: wm8962_supply {
 			compatible = "regulator-fixed";
 			regulator-name = "wm8962-supply";
@@ -41,12 +50,14 @@
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 0>;
+			gpio-key,wakeup;
 			linux,code = <115>; /* KEY_VOLUMEUP */
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 0>;
+			gpio-key,wakeup;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
 		};
 	};
@@ -69,6 +80,14 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &audmux {
@@ -77,10 +96,27 @@
 	status = "okay";
 };
 
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
 	status = "okay";
 };
 
@@ -93,7 +129,7 @@
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
-		clocks = <&clks 169>;
+		clocks = <&clks 201>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
@@ -113,6 +149,75 @@
        };
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_1>;
+	status = "okay";
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
@@ -125,6 +230,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
@@ -139,6 +245,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
 	status = "okay";
@@ -147,6 +254,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
new file mode 100644
index 000000000000..35f547929167
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	 0x80000000
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif_3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_2>;
+	cd-gpios = <&gpio1 2 0>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio3 9 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f21d259080fd..59154dc15fe4 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -14,11 +14,6 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -26,6 +21,18 @@
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
 		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	intc: interrupt-controller@00a01000 {
@@ -81,15 +88,14 @@
 			#size-cells = <1>;
 			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 13 0x04>, <0 15 0x04>;
-			interrupt-names = "gpmi-dma", "bch";
+			interrupts = <0 15 0x04>;
+			interrupt-names = "bch";
 			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 				 <&clks 150>, <&clks 149>;
 			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 				      "gpmi_bch_apb", "per1_bch";
 			dmas = <&dma_apbh 0>;
 			dma-names = "rx-tx";
-			fsl,gpmi-dma-channel = <0>;
 			status = "disabled";
 		};
 
@@ -110,6 +116,22 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		pcie: pcie@0x01000000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x4000>; /* DBI */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <0 123 0x04>;
+			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
+			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			status = "disabled";
+		};
+
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
 			interrupts = <0 94 0x04>;
@@ -130,8 +152,23 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks 197>, <&clks 3>,
+						 <&clks 197>, <&clks 107>,
+						 <&clks 0>,   <&clks 118>,
+						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -184,6 +221,8 @@
 					interrupts = <0 26 0x04>;
 					clocks = <&clks 160>, <&clks 161>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -197,6 +236,9 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks 178>;
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
@@ -207,6 +249,9 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks 179>;
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
@@ -217,6 +262,9 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks 180>;
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
@@ -278,17 +326,23 @@
 			};
 
 			can1: flexcan@02090000 {
+				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
+				clocks = <&clks 108>, <&clks 109>;
+				clock-names = "ipg", "per";
 			};
 
 			can2: flexcan@02094000 {
+				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
+				clocks = <&clks 110>, <&clks 111>;
+				clock-names = "ipg", "per";
 			};
 
 			gpt: gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
+				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
 				clocks = <&clks 119>, <&clks 120>;
@@ -491,6 +545,13 @@
 				};
 			};
 
+			tempmon: tempmon {
+				compatible = "fsl,imx6q-tempmon";
+				interrupts = <0 49 0x04>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+			};
+
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
@@ -546,6 +607,749 @@
 				reg = <0x020e0000 0x38>;
 			};
 
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x020e0000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x80000000
+							MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x80000000
+							MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x80000000
+							MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+						>;
+					};
+
+					pinctrl_audmux_2: audmux-2 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
+							MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
+							MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
+							MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
+						>;
+					};
+
+					pinctrl_audmux_3: audmux-3 {
+						fsl,pins = <
+							MX6QDL_PAD_DISP0_DAT16__AUD5_TXC  0x80000000
+							MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
+							MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+							MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+							MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+						>;
+					};
+
+					pinctrl_ecspi1_2: ecspi1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+							MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+							MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
+				ecspi3 {
+					pinctrl_ecspi3_1: ecspi3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+							MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+							MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+						>;
+					};
+				};
+
+				enet {
+					pinctrl_enet_1: enetgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+							MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+						>;
+					};
+
+					pinctrl_enet_2: enetgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
+							MX6QDL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+						>;
+					};
+
+					pinctrl_enet_3: enetgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+						>;
+					};
+				};
+
+				esai {
+					pinctrl_esai_1: esaigrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030
+							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK  0x1b030
+							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS     0x1b030
+							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2  0x1b030
+							MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3   0x1b030
+							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1   0x1b030
+							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0    0x1b030
+							MX6QDL_PAD_NANDF_CS2__ESAI_TX0       0x1b030
+							MX6QDL_PAD_NANDF_CS3__ESAI_TX1       0x1b030
+						>;
+					};
+
+					pinctrl_esai_2: esaigrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+							MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+							MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+							MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+							MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+							MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+						>;
+					};
+				};
+
+				flexcan1 {
+					pinctrl_flexcan1_1: flexcan1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+							MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+						>;
+					};
+
+					pinctrl_flexcan1_2: flexcan1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
+							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+						>;
+					};
+				};
+
+				flexcan2 {
+					pinctrl_flexcan2_1: flexcan2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+							MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+						>;
+					};
+				};
+
+				gpmi-nand {
+					pinctrl_gpmi_nand_1: gpmi-nand-1 {
+						fsl,pins = <
+							MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+							MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+							MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+							MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+							MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+							MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+							MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+							MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+							MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+							MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+							MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+							MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+							MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+							MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+							MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+							MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+							MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+						>;
+					};
+				};
+
+				hdmi_hdcp {
+					pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL  0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				hdmi_cec {
+					pinctrl_hdmi_cec_1: hdmicecgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+						>;
+					};
+
+					pinctrl_hdmi_cec_2: hdmicecgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c1_2: i2c1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+							MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c2_2: i2c2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c2_3: i2c2grp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_2: i2c3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+							MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_3: i2c3grp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+							MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_4: i2c3grp-4 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				ipu1 {
+					pinctrl_ipu1_1: ipu1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+							MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+							MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+							MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+							MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x80000000
+							MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+							MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+							MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+							MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+							MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+							MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+							MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+							MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+							MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+							MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+							MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+							MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+							MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+							MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+							MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+							MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+							MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+							MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+							MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+							MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+							MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+							MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+							MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+							MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+						>;
+					};
+
+					pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x80000000
+							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x80000000
+							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x80000000
+							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x80000000
+							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x80000000
+							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x80000000
+							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x80000000
+							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x80000000
+							MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
+							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x80000000
+							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x80000000
+							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x80000000
+						>;
+					};
+
+					pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04   0x80000000
+							MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05   0x80000000
+							MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06   0x80000000
+							MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07   0x80000000
+							MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08   0x80000000
+							MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09   0x80000000
+							MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10  0x80000000
+							MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11  0x80000000
+							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x80000000
+							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x80000000
+							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x80000000
+							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x80000000
+							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x80000000
+							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x80000000
+							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x80000000
+							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x80000000
+							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
+							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x80000000
+							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x80000000
+						>;
+					};
+				};
+
+				mlb {
+					pinctrl_mlb_1: mlbgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__MLB_CLK  0x71
+							MX6QDL_PAD_GPIO_6__MLB_SIG  0x71
+							MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
+						>;
+					};
+
+					pinctrl_mlb_2: mlbgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71
+							MX6QDL_PAD_GPIO_6__MLB_SIG    0x71
+							MX6QDL_PAD_GPIO_2__MLB_DATA   0x71
+						>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_1: pwm0grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+						>;
+					};
+				};
+
+				pwm3 {
+					pinctrl_pwm3_1: pwm3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+						>;
+					};
+				};
+
+				spdif {
+					pinctrl_spdif_1: spdifgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+						>;
+					};
+
+					pinctrl_spdif_2: spdifgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+							MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+						>;
+					};
+
+					pinctrl_spdif_3: spdifgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+							MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+						>;
+					};
+
+					pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D26__UART2_RX_DATA   0x1b0b1
+							MX6QDL_PAD_EIM_D27__UART2_TX_DATA   0x1b0b1
+							MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+							MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+							MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+							MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
+						>;
+					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+							MX6QDL_PAD_EIM_EB3__UART3_RTS_B	  0x1b0b1
+						>;
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+							MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+						>;
+					};
+				};
+
+				usbotg {
+					pinctrl_usbotg_1: usbotggrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg_2: usbotggrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+						>;
+					};
+				};
+
+				usbh2 {
+					pinctrl_usbh2_1: usbh2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x40013030
+							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030
+						>;
+					};
+
+					pinctrl_usbh2_2: usbh2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030
+						>;
+					};
+				};
+
+				usbh3 {
+					pinctrl_usbh3_1: usbh3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030
+							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE  0x40013030
+						>;
+					};
+
+					pinctrl_usbh3_2: usbh3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030
+						>;
+					};
+				};
+
+				usdhc1 {
+					pinctrl_usdhc1_1: usdhc1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+							MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
+							MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
+							MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
+							MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc1_2: usdhc1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc2 {
+					pinctrl_usdhc2_1: usdhc2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+							MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+							MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+							MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+							MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc2_2: usdhc2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc3 {
+					pinctrl_usdhc3_1: usdhc3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+						>;
+					};
+
+					pinctrl_usdhc3_2: usdhc3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc4 {
+					pinctrl_usdhc4_1: usdhc4grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
+							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
+							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+							MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+							MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+							MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+							MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc4_2: usdhc4grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
+							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
+							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+						>;
+					};
+				};
+
+				weim {
+					pinctrl_weim_cs0_1: weim_cs0grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
+						>;
+					};
+
+					pinctrl_weim_nor_1: weim_norgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_OE__EIM_OE_B     0xb0b1
+							MX6QDL_PAD_EIM_RW__EIM_RW       0xb0b1
+							MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+							/* data */
+							MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+							MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+							MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+							MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+							MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+							MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+							MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+							MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+							MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+							MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+							MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+							MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+							MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+							MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+							MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+							MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+							/* address */
+							MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+							MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+							MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+							MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+							MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+							MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+							MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+							MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+							MX6QDL_PAD_EIM_DA15__EIM_AD15  0xb0b1
+							MX6QDL_PAD_EIM_DA14__EIM_AD14  0xb0b1
+							MX6QDL_PAD_EIM_DA13__EIM_AD13  0xb0b1
+							MX6QDL_PAD_EIM_DA12__EIM_AD12  0xb0b1
+							MX6QDL_PAD_EIM_DA11__EIM_AD11  0xb0b1
+							MX6QDL_PAD_EIM_DA10__EIM_AD10  0xb0b1
+							MX6QDL_PAD_EIM_DA9__EIM_AD09   0xb0b1
+							MX6QDL_PAD_EIM_DA8__EIM_AD08   0xb0b1
+							MX6QDL_PAD_EIM_DA7__EIM_AD07   0xb0b1
+							MX6QDL_PAD_EIM_DA6__EIM_AD06   0xb0b1
+							MX6QDL_PAD_EIM_DA5__EIM_AD05   0xb0b1
+							MX6QDL_PAD_EIM_DA4__EIM_AD04   0xb0b1
+							MX6QDL_PAD_EIM_DA3__EIM_AD03   0xb0b1
+							MX6QDL_PAD_EIM_DA2__EIM_AD02   0xb0b1
+							MX6QDL_PAD_EIM_DA1__EIM_AD01   0xb0b1
+							MX6QDL_PAD_EIM_DA0__EIM_AD00   0xb0b1
+						>;
+					};
+				};
+			};
+
 			ldb: ldb@020e0008 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -555,13 +1359,11 @@
 
 				lvds-channel@0 {
 					reg = <0>;
-					crtcs = <&ipu1 0>;
 					status = "disabled";
 				};
 
 				lvds-channel@1 {
 					reg = <1>;
-					crtcs = <&ipu1 1>;
 					status = "disabled";
 				};
 			};
@@ -582,6 +1384,7 @@
 				interrupts = <0 2 0x04>;
 				clocks = <&clks 155>, <&clks 155>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 		};
@@ -751,8 +1554,8 @@
 				clocks = <&clks 196>;
 			};
 
-			ocotp@021bc000 {
-				compatible = "fsl,imx6q-ocotp";
+			ocotp: ocotp@021bc000 {
+				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 			};
 
@@ -791,6 +1594,8 @@
 				interrupts = <0 27 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -800,6 +1605,8 @@
 				interrupts = <0 28 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -809,6 +1616,8 @@
 				interrupts = <0 29 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -818,6 +1627,8 @@
 				interrupts = <0 30 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 2886a590823d..cc68e19c5163 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -17,6 +17,44 @@
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb_otg1_vbus: usb_otg1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: usb_otg2_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -38,6 +76,8 @@
 				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
 				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
 			>;
 		};
 	};
@@ -49,9 +89,26 @@
 	status = "okay";
 };
 
-&usdhc1 {
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1_1>;
+	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -59,16 +116,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c5e5da02d7e3..28558f1aaf2d 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -13,16 +13,20 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	cpus {
@@ -152,32 +156,41 @@
 				};
 
 				uart5: serial@02018000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart1: serial@02020000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart2: serial@02024000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -186,6 +199,9 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -195,6 +211,9 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -204,27 +223,36 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
 
 				uart3: serial@02034000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart4: serial@02038000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -356,7 +384,9 @@
 			};
 
 			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 
@@ -504,10 +534,26 @@
 				interrupts = <0 89 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+							MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+							MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
 				fec {
 					pinctrl_fec_1: fecgrp-1 {
 						fsl,pins = <
@@ -533,6 +579,64 @@
 					};
 				};
 
+				usbotg1 {
+					pinctrl_usbotg1_1: usbotg1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_2: usbotg1grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_3: usbotg1grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_4: usbotg1grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_5: usbotg1grp-5 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
+						>;
+					};
+				};
+
+				usbotg2 {
+					pinctrl_usbotg2_1: usbotg2grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_2: usbotg2grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_3: usbotg2grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_4: usbotg2grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
+						>;
+					};
+				};
+
 				usdhc1 {
 					pinctrl_usdhc1_1: usdhc1grp-1 {
 						fsl,pins = <
@@ -548,6 +652,38 @@
 							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
 						>;
 					};
+
+					pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+						>;
+					};
+
+
 				};
 
 				usdhc2 {
@@ -561,6 +697,29 @@
 							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+						>;
+					};
+
 				};
 
 				usdhc3 {
@@ -574,6 +733,28 @@
 							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+						>;
+					};
 				};
 			};
 
@@ -594,7 +775,9 @@
 				clocks = <&clks IMX6SL_CLK_SDMA>,
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
 			pxp: pxp@020f0000 {
@@ -638,7 +821,7 @@
 			usbotg2: usb@02184200 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 42 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -648,7 +831,7 @@
 			usbh: usb@02184400 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 40 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 813b91d7bea2..0f06f8687b0b 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -5,6 +5,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
 	timer@13000000 {
 		reg = <0x13000000 0x100>;
 		interrupt-parent = <&pic>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index b6b82eca8d1e..e6be9315ff0a 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -19,8 +19,11 @@
 	};
 
 	syscon {
-		/* AP system controller registers */
+		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logical module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
 	};
 
 	timer0: timer@13000000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index ff1aea0ee043..7deb3a3182b4 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -9,29 +9,28 @@
 	model = "ARM Integrator/CP";
 	compatible = "arm,integrator-cp";
 
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
 	chosen {
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
-	cpcon {
-		/* CP controller registers */
+	syscon {
+		compatible = "arm,integrator-cp-syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
 	timer0: timer@13000000 {
+		/* TIMER0 runs @ 25MHz */
 		compatible = "arm,integrator-cp-timer";
+		status = "disabled";
 	};
 
 	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
new file mode 100644
index 000000000000..d6713b113258
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -0,0 +1,821 @@
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	refclkmain: refclkmain {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <122880000>;
+		clock-output-names = "refclk-main";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3allclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3bllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktetbtrc: clktetbtrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clksr: clksr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkmsmcsram: clkmsmcsram {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "msmcsram";
+		reg = <0x02350038 0xb00>, <0x0235001c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <7>;
+	};
+
+	clkgem0: clkgem0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr30: clkddr30 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clktac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clktac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkwdtimer0: clkwdtimer0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
index 1334b42c6b77..100bdf52b847 100644
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dts
@@ -7,7 +7,9 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
 
 / {
 	model = "Texas Instruments Keystone 2 SoC";
@@ -67,18 +69,23 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0x308>;
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 20 0xf01>,
-			     <0 21 0xf01>,
-			     <0 22 0xf01>,
-			     <0 23 0xf01>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	soc {
@@ -93,14 +100,16 @@
 			reg = <0x023100e8 4>;	/* pll reset control reg */
 		};
 
+		/include/ "keystone-clocks.dtsi"
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
-			clock-frequency = <133120000>;
-			interrupts = <0 277 0xf01>;
+			clocks	= <&clkuart0>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		uart1:	serial@02531000 {
@@ -109,9 +118,66 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
-			clock-frequency = <133120000>;
-			interrupts = <0 280 0xf01>;
+			clocks	= <&clkuart1>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dtt@50 {
+				compatible = "at,24c1024";
+				reg = <0x50>;
+			};
 		};
 
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 1e5bef0bead7..650ef30e1856 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,4 +1,39 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			compatible = "marvell,88f6281-pinctrl";
@@ -41,37 +76,6 @@
 			};
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-
 		rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index a63a11137262..3933a331ddc2 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,4 +1,59 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
+	};
 	ocp@f1000000 {
 
 		pinctrl: pinctrl@10000 {
@@ -94,52 +149,5 @@
 			status = "disabled";
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 00c48d26de68..142b9cd3b454 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "LaCie CloudBox";
@@ -89,3 +89,19 @@
 		gpios = <&gpio0 17 0>;
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 9d777edd1f36..c39dd766c75a 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -11,14 +11,14 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index f4c852886d23..701c6b6cdaa2 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -11,14 +11,14 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index c87cfb816120..053aa20fb30f 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -12,7 +12,7 @@
  * and 6282 variants of the Marvell Kirkwood Development Board.
  */
 
-/include/ "kirkwood.dtsi"
+#include "kirkwood.dtsi"
 
 / {
 	memory {
@@ -39,28 +39,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			chip-delay = <25>;
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <2>;
 			status = "okay";
@@ -77,13 +55,43 @@
 			cd-gpios = <&gpio1 6 0>;
 			status = "okay";
 		};
+	};
+};
 
-		pcie-controller {
-			status = "okay";
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	chip-delay = <25>;
+	status = "okay";
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 14d4ceea3057..e112ca62d978 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 63872570e6ce..5119fb8a8eb6 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 0afe1d07c803..aefa375a550d 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";
@@ -148,44 +148,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 
 	regulators {
@@ -219,3 +181,57 @@
 		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 7714742bb8d8..33ff368fbfa5 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate FreeAgent Dockstar";
@@ -34,26 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x0500000 0xfb00000>;
-			};
-		};
 	};
 	gpio-leds {
 		compatible = "gpio-leds";
@@ -90,3 +70,40 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 36c7ba38d500..6f62af99c9cb 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";
@@ -99,3 +99,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 31caa6405065..a43bebb25110 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate GoFlex Net";
@@ -67,31 +67,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			chip-delay = <40>;
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "pogoplug";
-				reg = <0x0500000 0x2000000>;
-			};
-
-			partition@2500000 {
-				label = "root";
-				reg = <0x02500000 0xd800000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -170,3 +145,45 @@
 		};
 	};
 };
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 1e642f39b154..d30a91a5047d 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Guruplug Server Plus";
@@ -40,26 +40,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x00100000 0x00400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x00500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -96,3 +76,53 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 20c4b081f420..c5fb02f7ebc3 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,11 +1,11 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -43,6 +43,7 @@
 				marvell,function = "gpio";
 			};
 		};
+
 		serial@12000 {
 			status = "okay";
 		};
@@ -51,28 +52,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
 	};
 
 	gpio_keys {
@@ -93,6 +72,7 @@
 			gpios = <&gpio0 28 1>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
@@ -113,12 +93,55 @@
 			gpios = <&gpio0 27 0>;
 		};
 	};
+
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&pmx_power_off>;
 		pinctrl-names = "default";
 		gpios = <&gpio0 24 0>;
 	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x100000>;
+	};
 
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 441204e8abc6..4a62b206f680 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -18,6 +18,16 @@
 		linux,initrd-end   = <0x4800000>;
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -72,43 +82,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0xc0000>;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			partition@100000 {
-				label = "zImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@540000 {
-				label = "initrd";
-				reg = <0x540000 0x300000>;
-			};
-
-			partition@980000 {
-				label = "boot";
-				reg = <0x980000 0x1f400000>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -176,3 +149,48 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 00a7bfe5e83b..d15395d671ed 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";
@@ -113,31 +113,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@400000 {
-				label = "uInitrd";
-				reg = <0x540000 0x1000000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -194,3 +169,53 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "uInitrd";
+		reg = <0x540000 0x1000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index c3f036b86cca..da674bbd49a8 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Internet Space v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 5d9f5ea78700..cd44f37e54b5 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-98dx4122.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -34,13 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "ok";
-			chip-delay = <25>;
-		};
 	};
 
 	i2c@0 {
@@ -50,3 +43,26 @@
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "ok";
+	chip-delay = <25>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
index 9f55d95f35f5..e2fa368aef25 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-CHLv2";
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
index 5c84c118ed8d..8d89cdf8d6bf 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-XHL";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 31b17f5b9d28..4e8f9e42c592 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -207,3 +207,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 6179333fd71f..6c1ec2786e6e 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "MPL CEC4";
@@ -16,6 +16,16 @@
                 bootargs = "console=ttyS0,115200n8 earlyprintk";
         };
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_led_health: pmx-led-health {
@@ -85,37 +95,6 @@
                         pinctrl-names = "default";
                 };
 
-                nand@3000000 {
-                        pinctrl-0 = <&pmx_nand>;
-                        pinctrl-names = "default";
-                        status = "okay";
-
-                        partition@0 {
-                                label = "uboot";
-                                reg = <0x0000000 0x100000>;
-                        };
-
-                        partition@100000 {
-                                label = "env";
-                                reg = <0x100000 0x80000>;
-                        };
-
-                        partition@180000 {
-                                label = "fdt";
-                                reg = <0x180000 0x80000>;
-                        };
-
-                        partition@200000 {
-                                label = "kernel";
-                                reg = <0x200000 0x400000>;
-                        };
-
-                        partition@600000 {
-                                label = "rootfs";
-                                reg = <0x600000 0x1fa00000>;
-                        };
-                };
-
 		rtc@10300 {
 			status = "disabled";
 		};
@@ -134,14 +113,6 @@
 			cd-gpios = <&gpio1 15 1>;
 			/* No WP GPIO */
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -191,3 +162,61 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		device_type = "ethernet-phy";
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 000000000000..6317e1d088b3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,125 @@
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l12805d";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 0>;
+		};
+
+		red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 0>;
+		};
+
+		green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 0>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "SWR Button";
+			linux,code = <0x198>; /* KEY_RESTART */
+			gpios = <&gpio1 15 1>;
+		};
+		button@2 {
+			label = "WPS Button";
+			linux,code = <0x211>; /* KEY_WPS_BUTTON */
+			gpios = <&gpio1 14 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index ad6ade7d9191..e6a102cf424c 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "NETGEAR ReadyNAS Duo v2";
@@ -16,6 +16,16 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_power: pmx-button-power {
@@ -52,6 +62,17 @@
 			};
 		};
 
+		clocks {
+		       #address-cells = <1>;
+		       #size-cells = <0>;
+
+		       g762_clk: fixedclk {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
 		i2c@11000 {
 			status = "okay";
 
@@ -59,6 +80,15 @@
 				compatible = "ricoh,rs5c372a";
 				reg = <0x32>;
 			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
 		};
 
 		serial@12000 {
@@ -67,48 +97,10 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "jffs2";
-				reg = <0x1800000 0x6800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -184,3 +176,49 @@
                 };
         };
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 2afac0405816..2fcb82e20828 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -84,3 +84,19 @@
 	};
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index b50e93d7796c..53368d1022cc 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index af8259fe8955..279607093cdb 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Lite v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 85f24d227e17..defdc77fb550 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Max v2";
@@ -49,3 +49,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index 329e530bffe7..adbafdd90991 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	/* This machine is embedded in the first LaCie CloudBox product. */
@@ -50,3 +50,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
new file mode 100644
index 000000000000..e3f915defd3d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -0,0 +1,107 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pmx_usb_power_off: pmx-usb-power-off {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_off>;
+		pinctrl-names = "default";
+
+		usb0_power_off: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Off";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 69003598f5fa..b5418bcaecce 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,10 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-nsa310-common.dtsi"
 
 / {
-	model = "ZyXEL NSA310";
 	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
@@ -16,6 +14,16 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pinctrl-0 = <&pmx_unknown>;
@@ -41,11 +49,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_sys_green: pmx-led-sys-green {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
@@ -95,20 +98,6 @@
 				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
-
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
 		};
 
 		i2c@11000 {
@@ -119,57 +108,6 @@
 				reg = <0x2e>;
 			};
 		};
-
-		nand@3000000 {
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0x0100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "uboot_env";
-				reg = <0x0100000 0x0080000>;
-			};
-			partition@180000 {
-				label = "key_store";
-				reg = <0x0180000 0x0080000>;
-			};
-			partition@200000 {
-				label = "info";
-				reg = <0x0200000 0x0080000>;
-			};
-			partition@280000 {
-				label = "etc";
-				reg = <0x0280000 0x0a00000>;
-			};
-			partition@c80000 {
-				label = "kernel_1";
-				reg = <0x0c80000 0x0a00000>;
-			};
-			partition@1680000 {
-				label = "rootfs1";
-				reg = <0x1680000 0x2fc0000>;
-			};
-			partition@4640000 {
-				label = "kernel_2";
-				reg = <0x4640000 0x0a00000>;
-			};
-			partition@5040000 {
-				label = "rootfs2";
-				reg = <0x5040000 0x2fc0000>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_keys {
@@ -246,30 +184,4 @@
 			gpios = <&gpio1 8 0>;
 		};
 	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 0>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
-		pinctrl-names = "default";
-
-		usb0_power_off: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Off";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 0>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
new file mode 100644
index 000000000000..ab0212b0e6f5
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -0,0 +1,165 @@
+/dts-v1/;
+
+#include "kirkwood-nsa310-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_power_off: pmx-usb-power-off {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			lm85: lm85@2e {
+				compatible = "lm85";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio1 14 0>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <133>;
+			gpios = <&gpio1 5 1>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio1 4 1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 0>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 0>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 0>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 0>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 0>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 0>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 0>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 0>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 38dc8517d777..f0e3d213604c 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Plat'Home OpenBlocksA6";
@@ -29,43 +29,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			chip-delay = <25>;
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x90000>;
-			};
-
-			partition@90000 {
-				label = "env";
-				reg = <0x90000 0x44000>;
-			};
-
-			partition@d4000 {
-				label = "test";
-				reg = <0xd4000 0x24000>;
-			};
-
-			partition@f4000 {
-				label = "conf";
-				reg = <0xf4000 0x400000>;
-			};
-
-			partition@4f4000 {
-				label = "linux";
-				reg = <0x4f4000 0x1d20000>;
-			};
-
-			partition@2214000 {
-				label = "user";
-				reg = <0x2214000 0x1dec000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <1>;
 			status = "okay";
@@ -166,3 +129,56 @@
 		};
 	};
 };
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
new file mode 100644
index 000000000000..851fb2a60f20
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -0,0 +1,223 @@
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+		};
+
+		serial@12100 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+
+			s24c02: s24c02@50 {
+				compatible = "24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 1>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 1>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 1>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <116>;
+			gpios = <&gpio1 6 0>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	pinctrl-0 = <&pmx_ge1>;
+	pinctrl-names = "default";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index f7143f128504..1173d7fb31b2 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -6,8 +6,8 @@
  * Licensed under GPLv2
  */
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	memory {
@@ -48,27 +48,6 @@
 			pinctrl-names = "default";
 			status = "okay";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x0500000 0x1fb00000>;
-			};
-		};
 	};
 
 	regulators {
@@ -91,3 +70,40 @@
 		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index f620ce48de97..eac6a21f3b1f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies eSATA SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index bf1dff251432..bb61918313db 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f2052d7bc10f..320da677b984 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
@@ -90,37 +90,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot env";
-				reg = <0x0180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "uInitrd";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "rootfs";
-				reg = <0x1800000 0xe800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -203,3 +172,50 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 6dd1038e4de4..f755bc1dc604 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {
@@ -50,4 +50,6 @@
 			gpios = <&gpio0 16 1>;
 		};
 	};
-};
\ No newline at end of file
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 6fdc5ffcaae5..345562f75891 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,10 +1,20 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -30,14 +40,6 @@
 				marvell,function = "gpio";
 			};
 		};
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-
 	};
 
 	gpio_keys {
@@ -58,4 +60,6 @@
 			gpios = <&gpio1 5 1>;
 		};
 	};
-};
\ No newline at end of file
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 0c9a94cd666c..39158cf16258 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -11,6 +11,16 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		i2c@11000 {
 			status = "okay";
@@ -87,12 +97,21 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-		pcie-controller {
-			status = "okay";
+	};
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 9809fc1f105c..8b73c80f1dad 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,5 +1,7 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
@@ -11,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -20,23 +23,80 @@
 	       gpio0 = &gpio0;
 	       gpio1 = &gpio1;
 	};
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>,
-		      <0xf1020214 0x04>;
+
+	mbus {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		crypto@0301 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+			      <MBUS_ID(0x03, 0x01) 0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			status = "okay";
+		};
+
+		nand: nand@012f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			status = "disabled";
+		};
 	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000
-		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
-		          0xf4000000 0xf4000000 0x0000400
-		          0xf5000000 0xf5000000 0x0000400>;
+		ranges = <0x00000000 0xf1000000 0x0100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;
@@ -103,9 +163,11 @@
 			#clock-cells = <1>;
 		};
 
-		wdt@20300 {
+		wdt: watchdog-timer@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
 			clocks = <&gate_clk 7>;
 			status = "okay";
 		};
@@ -133,7 +195,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 
@@ -158,20 +220,6 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <0xf4000000 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			status = "disabled";
-		};
-
 		i2c@11000 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11000 0x20>;
@@ -183,14 +231,56 @@
 			status = "disabled";
 		};
 
-		crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xf5000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet0-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet1-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
new file mode 100644
index 000000000000..c6da987b20cb
--- /dev/null
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 000000000000..9c18adf788f7
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
new file mode 100644
index 000000000000..b0ee342598f0
--- /dev/null
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <3 0 0x10000000 0x00000400>,
+		 <7 0 0x2c000000 0x01000000>;
+
+	/*
+	 * Four port TL16CP754C serial port on GPMC,
+	 * they probably share the same GPIO IRQ
+	 * REVISIT: Add timing support from slls644g.pdf
+	 */
+	8250@3,0 {
+		compatible = "ns16550a";
+		reg = <3 0 0x100>;
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+
+	ethernet@gpmc {
+		reg = <7 0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 224c08f472f4..34cdecb4fdda 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -50,15 +50,15 @@
 			label = "bootloader";
 			reg = <0 0x20000>;
 		};
-		partition@0x20000 {
+		partition@20000 {
 			label = "params";
 			reg = <0x20000 0x20000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "kernel";
 			reg = <0x40000 0x200000>;
 		};
-		partition@0x240000 {
+		partition@240000 {
 			label = "file-system";
 			reg = <0x240000 0x3dc0000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index afdb16417d4e..31a632f7effb 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -69,6 +69,23 @@
 		};
 
 	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -79,6 +96,37 @@
 	};
 };
 
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <2600000>;
 
@@ -144,19 +192,12 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
 
-&omap3_pmx_core {
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-};
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
@@ -166,3 +207,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index dfd83103657a..fa532aaacc68 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -44,17 +44,6 @@
 		};
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 19 0>;	/* gpio_147 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 2 Power */
 	hsusb2_power: hsusb2_power_reg {
 		compatible = "regulator-fixed";
@@ -68,7 +57,7 @@
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
 	};
 
@@ -101,18 +90,18 @@
 
 	hsusbb2_pins: pinmux_hsusbb2_pins {
 		pinctrl-single,pins = <
-			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
-			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
-			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
-			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
-			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
-			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
-			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
-			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
-			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
-			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
-			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
 		>;
 	};
 
@@ -180,3 +169,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 7ef282795dd4..4665421bb7bc 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -125,7 +125,7 @@
 		nand-bus-width = <16>;
 
 		gpmc,device-nand;
-		gpmc,sync-clki-ps = <0>;
+		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
new file mode 100644
index 000000000000..4df68ad3736a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&omap3_pmx_core {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>,
+		 <5 0 0x2c000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
new file mode 100644
index 000000000000..3007e79c9cd6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 0>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 7d4329d179c4..e10dcd0fa539 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -8,68 +8,14 @@
 /dts-v1/;
 
 #include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
 
 / {
-	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
new file mode 100644
index 000000000000..b9b55c95a566
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "OMAP3 GTA04";
+	compatible = "ti,omap3-gta04", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aux-button {
+			label = "aux";
+			linux,code = <169>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* pressure sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+	};
+
+	/* leds */
+	tca6507@45 {
+		compatible = "ti,tca6507";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x45>;
+
+		gta04_led0: red_aux@0 {
+			label = "gta04:red:aux";
+			reg = <0x0>;
+		};
+
+		gta04_led1: green_aux@1 {
+			label = "gta04:green:aux";
+			reg = <0x1>;
+		};
+
+		gta04_led3: red_power@3 {
+			label = "gta04:red:power";
+			reg = <0x3>;
+			linux,default-trigger = "default-on";
+		};
+
+		gta04_led4: green_power@4 {
+			label = "gta04:green:power";
+			reg = <0x4>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index bc48b114eae6..ba1e58b7b7e3 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -48,6 +48,15 @@
 		>;
 	};
 
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
+			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
+			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
+			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -68,6 +77,8 @@
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
+
+	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
@@ -93,6 +104,11 @@
 	clock-frequency = <400000>;
 };
 
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
 &mmc1 {
       pinctrl-names = "default";
       pinctrl-0 = <&mmc1_pins>;
@@ -127,3 +143,12 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c48284587c..d5cc79267250 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,13 +10,17 @@
  */
 
 #include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
 
 / {
 	model = "IGEPv2";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
@@ -41,19 +45,56 @@
 		};
 	};
 
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+       /* HS USB Port 1 Power */
+       hsusb1_power: hsusb1_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb1_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+               startup-delay-us = <70000>;
+       };
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
 	};
+};
 
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			0x5aa (PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			0x5a8 (PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
 	};
 };
 
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+		0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+		0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+	>;
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 
@@ -99,59 +140,37 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
 	};
 
-	ethernet@5,0 {
+	ethernet@gpmc {
 		pinctrl-names = "default";
 		pinctrl-0 = <&smsc911x_pins>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
 		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
-		reg-io-width = <4>;
-
-		smsc,save-mac-address;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d05383836..525e6d9b0978 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -16,7 +16,10 @@
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
@@ -43,6 +46,12 @@
 	};
 };
 
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+	>;
+};
+
 &gpmc {
 	ranges = <0 0 0x00000000 0x20000000>;
 
@@ -74,19 +83,19 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
new file mode 100644
index 000000000000..39828ce464ee
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 000000000000..c4f20bfe4cce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 (or later) as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		camera_lens_cover {
+			label = "Camera Lens Cover";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
+			gpio-key,wakeup;
+		};
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
+			gpio-key,wakeup;
+		};
+
+		camera_capture {
+			label = "Camera Capture";
+			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+			linux,code = <0xd4>; /* KEY_CAMERA */
+			gpio-key,wakeup;
+		};
+
+		lock_button {
+			label = "Lock Button";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+			linux,code = <0x98>; /* KEY_SCREENLOCK */
+			gpio-key,wakeup;
+		};
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
+			gpio-key,wakeup;
+		};
+
+		proximity_sensor {
+			label = "Proximity Sensor";
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+		};
+	};
+
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	display_pins: pinmux_display_pins {
+		pinctrl-single,pins = <
+			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2200000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+	regulator-name = "V28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on; /* due battery cover sensor */
+};
+
+&vaux2 {
+	regulator-name = "VCSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux3 {
+	regulator-name = "VMMC2_30";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-name = "VCAM_ANA_28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "VMMC1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "V28_A";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+	regulator-name = "VPLL";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vpll2 {
+	regulator-name = "VSDI_CSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vsim {
+	regulator-name = "VMMC2_IO_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "VIO";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+};
+
+&vintana1 {
+	regulator-name = "VINTANA1";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&vintana2 {
+	regulator-name = "VINTANA2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+	regulator-always-on;
+};
+
+&vintdig {
+	regulator-name = "VINTDIG";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+
+	tlv320aic3x: tlv320aic3x@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	tlv320aic3x_aux: tlv320aic3x@19 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x19>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	lp5523: lp5523@32 {
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		chan0 {
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan1 {
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan2 {
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan3 {
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan4 {
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan5 {
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan6 {
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan7 {
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan8 {
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+	};
+
+	bq27200: bq27200@55 {
+		compatible = "ti,bq27200";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
+
+	/* gpio-irq for dma: 65 */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x10000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's
+		 * Maemo 5 (Fremantle) release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "log";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "kernel";
+			reg = <0x000c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "initfs";
+			reg = <0x002c0000 0x00200000>;
+		};
+		partition@5 {
+			label = "rootfs";
+			reg = <0x004c0000 0x0fb40000>;
+		};
+	};
+};
+
+&mcspi1 {
+	/*
+	 * For some reason, touchscreen is necessary for screen to work at
+	 * all on real hw. It works well without it on emulator.
+	 *
+	 * Also... order in the device tree actually matters here.
+	 */
+	tsc2005@0 {
+		compatible = "tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+	};
+	mipid@2 {
+		compatible = "acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pins>;
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <2>;
+	power = <50>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 000000000000..94eb77d3b9dd
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,174 @@
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x20000000>;
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
new file mode 100644
index 000000000000..b076a526b999
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 8f1abec78275..a461d2fd1fb0 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -76,6 +76,8 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
new file mode 100644
index 000000000000..15eb9fe5169c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 0>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			0x168 (PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+			0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+			0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+		pinctrl-single,pins = <
+			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+       status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda1fae4..f3a0c26ed0c2 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -19,6 +19,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -37,6 +40,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
 		interrupts = <3>;
 		ti,hwmods = "debugss";
 	};
@@ -71,6 +75,8 @@
 	 */
 	ocp {
 		compatible = "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -107,17 +113,21 @@
 			reg = <0x48002030 0x05cc>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
-		omap3_pmx_wkup: pinmux@0x48002a00 {
+		omap3_pmx_wkup: pinmux@48002a00 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x48002a00 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {
@@ -189,24 +199,40 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -214,6 +240,10 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -221,6 +251,10 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -228,6 +262,8 @@
 
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -246,6 +282,8 @@
 
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -259,6 +297,8 @@
 
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -272,6 +312,8 @@
 
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -280,8 +322,17 @@
 			dma-names = "tx0", "rx0";
 		};
 
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
@@ -290,6 +341,8 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
 			ti,hwmods = "mmc2";
 			dmas = <&sdma 47>, <&sdma 48>;
 			dma-names = "tx", "rx";
@@ -297,6 +350,8 @@
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
 			ti,hwmods = "mmc3";
 			dmas = <&sdma 77>, <&sdma 78>;
 			dma-names = "tx", "rx";
@@ -304,6 +359,7 @@
 
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
 			ti,hwmods = "wd_timer2";
 		};
 
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bcc3e63..281914ed0151 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -84,15 +84,15 @@
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};
@@ -125,19 +125,19 @@
 			label = "xloader-nand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-nand";
 			reg = <0x80000 0x140000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "params-nand";
 			reg = <0x1c0000 0xc0000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel-nand";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem-nand";
 			reg = <0x780000 0x7880000>;
 		};
@@ -170,19 +170,19 @@
 			label = "xloader-onenand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-onenand";
 			reg = <0x80000 0x40000>;
 		};
-		partition@0xc0000 {
+		partition@c0000 {
 			label = "params-onenand";
 			reg = <0xc0000 0x20000>;
 		};
-		partition@0xe0000 {
+		partition@e0000 {
 			label = "kernel-onenand";
 			reg = <0xe0000 0x200000>;
 		};
-		partition@0x2e0000 {
+		partition@2e0000 {
 			label = "filesystem-onenand";
 			reg = <0x2e0000 0xfd20000>;
 		};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index f8b3765eb9be..380c22eb468e 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -31,6 +31,10 @@
 	ocp {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5b242e..298e85020e1b 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -60,22 +60,6 @@
 			"AFMR", "Line In";
 	};
 
-	/*
-	 * Temp hack: Need to be replaced with the proper gpio-controlled
-	 * reset driver as soon it will be merged.
-	 * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
-	 */
-	/* HS USB Port 1 RESET */
-	hsusb1_reset: hsusb1_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 30 0>;	/* gpio_62 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 1 Power */
 	hsusb1_power: hsusb1_power_reg {
 		compatible = "regulator-fixed";
@@ -97,7 +81,7 @@
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb1_reset>;
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 		vcc-supply = <&hsusb1_power>;
 	/**
 	 * FIXME:
@@ -107,39 +91,34 @@
 	 */
 		clock-frequency = <19200000>;
 	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
 
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
 	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_dpi_pins
+			&tfp410_pins
 			&dss_hdmi_pins
 			&tpd12s015_pins
 			&hsusbb1_pins
 	>;
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
@@ -166,6 +145,47 @@
 		>;
 	};
 
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
@@ -235,6 +255,33 @@
 			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -265,6 +312,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -314,8 +362,12 @@
 };
 
 &mmc5 {
-	ti,non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
+	cap-power-off-card;
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 56c435468e94..816d1c95b592 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -62,3 +62,7 @@
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&gpio1 {
+	 ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 7951b4ea500a..5fc3f43c5a81 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -140,25 +140,24 @@
 			"DMic", "Digital Mic",
 			"Digital Mic", "Digital Mic1 Bias";
 	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
 
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
 	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&dmic_pins
@@ -193,12 +192,6 @@
 		>;
 	};
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
@@ -295,6 +288,26 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -337,6 +350,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -420,8 +434,12 @@
 };
 
 &mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
-	ti,non-removable;
+	cap-power-off-card;
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b593d4..a1e05853afcd 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -17,6 +17,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -56,7 +60,7 @@
 		cache-level = <2>;
 	};
 
-	local-timer@0x48240600 {
+	local-timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -114,6 +118,8 @@
 			reg = <0x4a100040 0x0196>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -122,6 +128,8 @@
 			reg = <0x4a31e040 0x0038>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -214,6 +222,7 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 		};
 
 		uart1: serial@4806a000 {
@@ -248,6 +257,12 @@
 			clock-frequency = <48000000>;
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
@@ -492,6 +507,7 @@
 			reg = <0x4c000000 0x100>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -503,6 +519,7 @@
 			reg = <0x4d000000 0x100>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -519,7 +536,8 @@
 			usb2_phy: usb2phy@4a0ad080 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
+				#phy-cells = <0>;
 			};
 		};
 
@@ -643,12 +661,16 @@
 			};
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a00233c 0x4>;
-			reg-names = "control_dev_conf", "otghs_control";
-			ti,type = <1>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usbotg: control-phy@4a00233c {
+			compatible = "ti,control-phy-otghs";
+			reg = <0x4a00233c 0x4>;
+			reg-names = "otghs_control";
 		};
 
 		usb_otg_hs: usb_otg_hs@4a0ab000 {
@@ -658,10 +680,30 @@
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			usb-phy = <&usb2_phy>;
+			phys = <&usb2_phy>;
+			phy-names = "usb2-phy";
 			multipoint = <1>;
 			num-eps = <16>;
 			ram-bits = <12>;
-			ti,has-mailbox;
+			ctrl-module = <&omap_control_usbotg>;
+		};
+
+		aes: aes@4b501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x4b501000 0xa0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 111>, <&sdma 110>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 117>, <&sdma 116>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 65d7b601651c..002fa70180a5 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -27,21 +27,10 @@
 		regulator-max-microvolt = <3000000>;
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
 	/**
 	  * FIXME
 	  * Put the right clock phandle here when available
@@ -51,21 +40,10 @@
 		clock-frequency = <19200000>;
 	};
 
-	/* HS USB Port 3 RESET */
-	hsusb3_reset: hsusb3_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb3_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 3 */
 	hsusb3_phy: hsusb3_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb3_reset>;
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
 	leds {
@@ -84,7 +62,6 @@
 	pinctrl-0 = <
 			&twl6040_pins
 			&mcpdm_pins
-			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
 			&usbhost_pins
@@ -93,7 +70,7 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 		>;
 	};
 
@@ -107,15 +84,6 @@
 		>;
 	};
 
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0x144 (PIN_INPUT | MUX_MODE0)		/* abedmic_din1.abedmic_din1 */
-			0x146 (PIN_INPUT | MUX_MODE0)		/* abedmic_din2.abedmic_din2 */
-			0x148 (PIN_INPUT | MUX_MODE0)		/* abedmic_din3.abedmic_din3 */
-			0x14a (PIN_OUTPUT | MUX_MODE0)		/* abedmic_clk1.abedmic_clk1 */
-		>;
-	};
-
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
 			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
@@ -153,25 +121,25 @@
 			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
 			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
 			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs */
+			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
 		>;
 	};
 
 	mcspi3_pins: pinmux_mcspi3_pins {
 		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
+			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
 		>;
 	};
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
+			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
+			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
+			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
+			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
 		>;
 	};
 
@@ -271,6 +239,14 @@
 		reg = <0x48>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
 
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
@@ -334,15 +310,22 @@
 					ti,smps-range = <0x80>;
 				};
 
-				smps10_reg: smps10 {
+				smps10_out2_reg: smps10_out2 {
 					/* VBUS_5V_OTG */
-					regulator-name = "smps10";
+					regulator-name = "smps10_out2";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
@@ -470,6 +453,11 @@
 	phys = <0 &hsusb2_phy &hsusb3_phy>;
 };
 
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
 &mcspi1 {
 
 };
@@ -503,3 +491,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&uart5_pins>;
 };
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 07be2cd7b318..fc3fad563861 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -21,6 +21,11 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -33,10 +38,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				500000  880000
+				1000000 1060000
+				1500000 1250000
+			>;
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -52,7 +64,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <6144000>;
 	};
 
 	gic: interrupt-controller@48211000 {
@@ -276,6 +287,12 @@
 			ti,hwmods = "i2c5";
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
@@ -604,9 +621,10 @@
 			ti,hwmods = "wd_timer2";
 		};
 
-		emif1: emif@0x4c000000 {
+		emif1: emif@4c000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4c000000 0x400>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -615,9 +633,10 @@
 			hw-caps-temp-alert;
 		};
 
-		emif2: emif@0x4d000000 {
+		emif2: emif@4d000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4d000000 0x400>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,18 +645,22 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a002370 0x4>;
-			reg-names = "control_dev_conf", "phy_power_usb";
-			ti,type = <2>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
 		};
 
-		omap_dwc3@4a020000 {
+		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x1000>;
+			reg = <0x4a020000 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -645,23 +668,25 @@
 			ranges;
 			dwc3@4a030000 {
 				compatible = "snps,dwc3";
-				reg = <0x4a030000 0x1000>;
+				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				dr_mode = "peripheral";
 				tx-fifo-resize;
 			};
 		};
 
-		ocp2scp {
+		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
 			};
 
 			usb3_phy: usb3phy@4a084400 {
@@ -670,7 +695,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb3phy>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 0077fc8510b7..aed83deaa991 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -53,3 +53,20 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		device-type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 892c64e3f1e1..e06c37e91ac6 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -16,11 +16,12 @@
 	aliases {
 		gpio0 = &gpio0;
 	};
+
 	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
+		compatible = "marvell,orion-intc";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>;
+		reg = <0xf1020200 0x08>;
 	};
 
 	ocp@f1000000 {
@@ -132,5 +133,34 @@
 			interrupts = <28>;
 			status = "okay";
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <22>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth: ethernet-controller@72000 {
+			compatible = "marvell,orion-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet-port@0 {
+				device_type = "network";
+				compatible = "marvell,orion-eth-port";
+				reg = <0>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index bbeb623fc2c6..daee58944e15 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -76,6 +76,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -86,10 +91,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -171,7 +183,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +209,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +242,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +253,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +264,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +290,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
@@ -268,7 +299,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <25>;
+				sirf,spi-dma-tx-channel = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 19>;
+				status = "disabled";
 			};
 
 			spi1: spi@b0170000 {
@@ -276,7 +313,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
+				status = "disabled";
 			};
 
 			i2c0: i2c@b00e0000 {
@@ -285,6 +328,8 @@
 				reg = <0xb00e0000 0x10000>;
 				interrupts = <24>;
 				clocks = <&clks 17>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			i2c1: i2c@b00f0000 {
@@ -293,6 +338,8 @@
 				reg = <0xb00f0000 0x10000>;
 				interrupts = <25>;
 				clocks = <&clks 18>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			tsc@b0110000 {
@@ -341,6 +388,12 @@
 						sirf,function = "uart0";
 					};
 				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
 				uart1_pins_a: uart1@0 {
 					uart {
 						sirf,pins = "uart1grp";
@@ -479,18 +532,42 @@
                                                 sirf,function = "usp0";
                                         };
                                 };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins =
+							"usp0_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp0_uart_nostreamctrl";
+                                        };
+                                };
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
                                                 sirf,function = "usp1";
                                         };
                                 };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins =
+							"usp1_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp1_uart_nostreamctrl";
+                                        };
+                                };
                                 usp2_pins_a: usp2@0 {
                                         usp2 {
                                                 sirf,pins = "usp2grp";
                                                 sirf,function = "usp2";
                                         };
                                 };
+				usp2_uart_nostreamctrl_pins_a: usp2@1 {
+                                        usp2 {
+                                                sirf,pins =
+							"usp2_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp2_uart_nostreamctrl";
+                                        };
+                                };
                                 usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
                                         usb0_utmi_drvbus {
                                                 sirf,pins = "usb0_utmi_drvbusgrp";
@@ -503,6 +580,18 @@
                                                 sirf,function = "usb1_utmi_drvbus";
                                         };
                                 };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
                                 warm_rst_pins_a: warm_rst@0 {
                                         warm_rst {
                                                 sirf,pins = "warm_rstgrp";
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index f9d92da86783..83bb0eff697b 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -28,5 +28,16 @@
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <56>;
 		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa3xx-gpio";
+			reg = <0x40e00000 0x10000>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupts = <8 9 10>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 386d42870215..386d42870215 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 93e9f7e0b7ad..93e9f7e0b7ad 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
new file mode 100644
index 000000000000..1fb20f2333cc
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r7s72100.dtsi"
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 000000000000..46b82aa7dc4e
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
new file mode 100644
index 000000000000..9443e93d3cac
--- /dev/null
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -0,0 +1,138 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 3.3V rail, used by several devices on APE6EVM */
+	ape6evm_fixed_3v3: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&pfc {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	scifa0_pins: scifa0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	mmc0_pins: mmcif {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sdhi1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f603c6946c29..91436b58016f 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,ape6evm", "renesas,r8a73a4";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory@40000000 {
@@ -50,3 +50,26 @@
 		};
 	};
 };
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019c0e30..287e047592a0 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -78,6 +78,49 @@
 				<0 56 4>, <0 57 4>;
 	};
 
+	dmac: dma-multiplexer@0 {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <20>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 220 4
+					0 200 4
+					0 201 4
+					0 202 4
+					0 203 4
+					0 204 4
+					0 205 4
+					0 206 4
+					0 207 4
+					0 208 4
+					0 209 4
+					0 210 4
+					0 211 4
+					0 212 4
+					0 213 4
+					0 214 4
+					0 215 4
+					0 216 4
+					0 217 4
+					0 218 4
+					0 219 4>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
+		};
+	};
+
 	thermal@e61f0000 {
 		compatible = "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
@@ -85,4 +128,146 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 174 0x4>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 175 0x4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 176 0x4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 177 0x4>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 178 0x4>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 179 0x4>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 0x4>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 185 0x4>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 173 0x4>;
+		status = "disabled";
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a73a4";
+		reg = <0 0xe6050000 0 0x9000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 09ea22c26359..1c56c5e56950 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -10,13 +10,15 @@
 
 /dts-v1/;
 /include/ "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "armadillo 800 eva reference";
 	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {
@@ -33,13 +35,123 @@
 		regulator-boot-on;
 	};
 
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+		};
+		led2 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c0 {
+	status = "okay";
 	touchscreen: st1232@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
 		interrupt-parent = <&irqpin1>;
 		interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	scifa1_pins: scifa1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	st1232_pins: st1232 {
+		renesas,groups = "intc_irq10";
+		renesas,function = "intc";
+	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
 	};
 };
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 93da655b2598..426cd9c3e1c4 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,armadillo800eva";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 24e930643821..ae1e230f711d 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -32,6 +32,11 @@
 		      <0xc2000000 0x1000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 83 4>;
+	};
+
 	/* irqpin0: IRQ0 - IRQ7 */
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
@@ -126,6 +131,7 @@
 			      0 202 0x4
 			      0 203 0x4
 			      0 204 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6c20000 {
@@ -138,5 +144,54 @@
 			      0 71 0x4
 			      0 72 0x4
 			      0 73 0x4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a7740";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605800c 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		status = "disabled";
+		#pwm-cells = <3>;
+	};
+
+	mmcif0: mmcif@e6bd0000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 56 4
+				0 57 4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@e6850000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6850000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 117 4
+				0 118 4
+				0 119 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@e6860000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6860000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 121 4
+				0 122 4
+				0 123 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
new file mode 100644
index 000000000000..969e386e852c
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -0,0 +1,57 @@
+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7778.dtsi"
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw-reference", "renesas,r8a7778";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
+&irqpin {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 0076b1e8a0fb..12bbebc9c955 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -22,7 +22,7 @@
 	compatible = "renesas,bockw", "renesas,r8a7778";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs";
+		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 474373559bdc..a6308a399e2d 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -32,4 +32,88 @@
 		reg = <0xfe438000 0x1000>,
 		      <0xfe430000 0x100>;
 	};
+
+	/* irqpin: IRQ0 - IRQ3 */
+	irqpin: irqpin@fe78001c {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		status = "disabled"; /* default off */
+		reg =	<0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupt-parent = <&gic>;
+		interrupts =   <0 27 0x4
+				0 28 0x4
+				0 29 0x4
+				0 30 0x4>;
+		sense-bitfield-width = <2>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 27>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7778";
+		reg = <0xfffc000 0x118>;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 72be4c87cfb5..ab4110aa3c3b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -11,13 +11,14 @@
 
 /dts-v1/;
 /include/ "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "marzen";
 	compatible = "renesas,marzen-reference", "renesas,r8a7779";
 
 	chosen {
-		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
 	};
 
 	memory {
@@ -37,11 +38,63 @@
 	lan0@18000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
+		pinctrl-0 = <&lan0_pins>;
+		pinctrl-names = "default";
+
 		phy-mode = "mii";
-		interrupt-parent = <&gic>;
-		interrupts = <0 28 0x4>;
+		interrupt-parent = <&irqpin0>;
+		interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */
 		reg-io-width = <4>;
 		vddvario-supply = <&fixedregulator3v3>;
 		vdd33a-supply = <&fixedregulator3v3>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led2 {
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&irqpin0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+	pinctrl-names = "default";
+
+	lan0_pins: lan0 {
+		intc {
+			renesas,groups = "intc_irq1_b";
+			renesas,function = "intc";
+		};
+		lbsc {
+			renesas,groups = "lbsc_ex_cs0";
+			renesas,function = "lbsc";
+		};
+	};
+
+	scif2_pins: scif2 {
+		renesas,groups = "scif2_data_c";
+		renesas,function = "scif2";
+	};
+
+	scif4_pins: scif4 {
+		renesas,groups = "scif4_data";
+		renesas,function = "scif4";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
+				 "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
new file mode 100644
index 000000000000..f3f7f7999736
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for the Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7779.dtsi"
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6bf756..19faeac3fd2e 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -48,9 +48,94 @@
                       <0xf0000100 0x100>;
         };
 
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 141 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 142 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 143 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 145 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc45000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 146 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 147 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
 	irqpin0: irqpin@fe780010 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
+		status = "disabled";
 		interrupt-controller;
 		reg = <0xfe78001c 4>,
 			<0xfe780010 4>,
@@ -65,40 +150,49 @@
 		sense-bitfield-width = <2>;
 	};
 
-	i2c0: i2c@0xffc70000 {
+	i2c0: i2c@ffc70000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc70000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 79 0x4>;
+		status = "disabled";
 	};
 
-	i2c1: i2c@0xffc71000 {
+	i2c1: i2c@ffc71000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc71000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 82 0x4>;
+		status = "disabled";
 	};
 
-	i2c2: i2c@0xffc72000 {
+	i2c2: i2c@ffc72000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc72000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 80 0x4>;
+		status = "disabled";
 	};
 
-	i2c3: i2c@0xffc73000 {
+	i2c3: i2c@ffc73000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc73000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 81 0x4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7779";
+		reg = <0xfffc0000 0x23c>;
 	};
 
 	thermal@ffc48000 {
diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts b/arch/arm/boot/dts/r8a7790-lager-reference.dts
new file mode 100644
index 000000000000..c462ef138922
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-lager-reference.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager-reference", "renesas,r8a7790";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 09a84fce89d6..203bd089af29 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel";
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b11721c..ee845fad939b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -24,6 +24,55 @@
 			reg = <0>;
 			clock-frequency = <1300000000>;
 		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+		};
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -38,6 +87,78 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc40000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 4 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc41000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 5 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc42000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 6 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc43000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 7 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc44000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 8 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc45000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 9 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
@@ -54,4 +175,103 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
+
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 287 0x4>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 288 0x4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 286 0x4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 290 0x4>;
+		status = "disabled";
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7790";
+		reg = <0 0xe6060000 0 0x250>;
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi3: sdhi@ee160000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee160000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 168 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
new file mode 100644
index 000000000000..1ce5250ec278
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7791.dtsi"
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 000000000000..fea5cfef4691
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r8a7791";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 0 4>,
+			      <0 1 4>,
+			      <0 2 4>,
+			      <0 3 4>,
+			      <0 12 4>,
+			      <0 13 4>,
+			      <0 14 4>,
+			      <0 15 4>,
+			      <0 16 4>,
+			      <0 17 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
new file mode 100644
index 000000000000..035df4053c21
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		vcc_sd0: fixed-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "sdmmc-supply";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			startup-delay-us = <100000>;
+		};
+
+		dwmmc@10214000 { /* sdmmc */
+			num-slots = <1>;
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+			vmmc-supply = <&vcc_sd0>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		dwmmc@10218000 { /* wifi */
+			num-slots = <1>;
+			status = "okay";
+			non-removable;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+			button@1 {
+				gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+				linux,code = <104>;
+				label = "GPIO Key Vol-";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <0>;
+				debounce-interval = <100>;
+			};
+			/* VOL+ comes somehow thru the ADC */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac93d3f6..be5d2b09a363 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -14,15 +14,12 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
 #include "rk3066a-clocks.dtsi"
 
 / {
 	compatible = "rockchip,rk3066a";
-	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -43,33 +40,6 @@
 	};
 
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		gic: interrupt-controller@1013d000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x1013d000 0x1000>,
-			      <0x1013c100 0x0100>;
-		};
-
-		L2: l2-cache-controller@10138000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10138000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		local-timer@1013c600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1013c600 0x20>;
-			interrupts = <GIC_PPI 13 0x304>;
-			clocks = <&dummy150m>;
-		};
-
 		timer@20038000 {
 			compatible = "snps,dw-apb-timer-osc";
 			reg = <0x20038000 0x100>;
@@ -191,17 +161,14 @@
 				uart0_xfer: uart0-xfer {
 					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_cts: uart0-cts {
 					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_rts: uart0-rts {
 					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -209,17 +176,14 @@
 				uart1_xfer: uart1-xfer {
 					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_cts: uart1-cts {
 					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_rts: uart1-rts {
 					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -227,7 +191,6 @@
 				uart2_xfer: uart2-xfer {
 					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 				/* no rts / cts for uart2 */
 			};
@@ -236,44 +199,36 @@
 				uart3_xfer: uart3-xfer {
 					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_cts: uart3-cts {
 					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_rts: uart3-rts {
 					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd0 {
 				sd0_clk: sd0-clk {
 					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cmd: sd0-cmd {
 					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cd: sd0-cd {
 					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_wp: sd0-wp {
 					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus1: sd0-bus-width1 {
 					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus4: sd0-bus-width4 {
@@ -281,34 +236,28 @@
 							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd1 {
 				sd1_clk: sd1-clk {
 					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cmd: sd1-cmd {
 					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cd: sd1-cd {
 					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_wp: sd1-wp {
 					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus1: sd1-bus-width1 {
 					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus4: sd1-bus-width4 {
@@ -316,75 +265,8 @@
 							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 		};
-
-		uart0: serial@10124000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10124000 0x400>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 8>;
-			status = "disabled";
-		};
-
-		uart1: serial@10126000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10126000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 10>;
-			status = "disabled";
-		};
-
-		uart2: serial@20064000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20064000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 12>;
-			status = "disabled";
-		};
-
-		uart3: serial@20068000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20068000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 14>;
-			status = "disabled";
-		};
-
-		dwmmc@10214000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10214000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
-
-		dwmmc@10218000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10218000 0x1000>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
new file mode 100644
index 000000000000..b1b92dc245ce
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-clocks.dtsi
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy150m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_aclk_core",
+				"reserved", "gate_i2s0",
+				"gate_i2s0_frac", "reserved",
+				"reserved", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer3", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk@200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "reserved";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk@200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&xin24m>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_timer2", "gate_timer4",
+				"gate_hsicphy", "gate_cif0_out",
+				"gate_timer5", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "reserved",
+				"gate_timer6", "gate_aclk_gpu_src";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk@200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "reserved",
+				"gate_aclk_intmem", "reserved",
+				"gate_hclk_imem1", "gate_hclk_imem0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk@200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk@200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"reserved", "reserved",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk@200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&dummy>,
+				 <&dummy>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&dummy>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
+				"gate_hclk_hsic", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"reserved", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk@200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&dummy>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_aclk_gps";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk@200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
new file mode 100644
index 000000000000..3ba1968a70ab
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+
+	memory {
+		reg = <0x60000000 0x80000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			yellow {
+				gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			sleep {
+				gpios = <&gpio0 15 0>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
new file mode 100644
index 000000000000..1a26b03b3649
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3xxx.dtsi"
+#include "rk3188-clocks.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+		};
+	};
+
+	soc {
+		global-timer@1013c200 {
+			interrupts = <GIC_PPI 11 0xf04>;
+		};
+
+		local-timer@1013c600 {
+			interrupts = <GIC_PPI 13 0xf04>;
+		};
+
+		pinctrl@20008000 {
+			compatible = "rockchip,rk3188-pinctrl";
+			reg = <0x20008000 0xa0>,
+			      <0x20008164 0x1a0>;
+			reg-names = "base", "pull";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0@0x2000a000 {
+				compatible = "rockchip,rk3188-gpio-bank0";
+				reg = <0x2000a000 0x100>,
+				      <0x20004064 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio1@0x2003c000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003c000 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 10>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio2@2003e000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003e000 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 11>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio3@20080000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20080000 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 12>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pcfg_pull_up: pcfg_pull_up {
+				bias-pull-up;
+			};
+
+			pcfg_pull_down: pcfg_pull_down {
+				bias-pull-down;
+			};
+
+			pcfg_pull_none: pcfg_pull_none {
+				bias-disable;
+			};
+
+			uart0 {
+				uart0_xfer: uart0-xfer {
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_cts: uart0-cts {
+					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_rts: uart0-rts {
+					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart1 {
+				uart1_xfer: uart1-xfer {
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_cts: uart1-cts {
+					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_rts: uart1-rts {
+					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart2 {
+				uart2_xfer: uart2-xfer {
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+				/* no rts / cts for uart2 */
+			};
+
+			uart3 {
+				uart3_xfer: uart3-xfer {
+					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_cts: uart3-cts {
+					rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_rts: uart3-rts {
+					rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd0 {
+				sd0_clk: sd0-clk {
+					rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cmd: sd0-cmd {
+					rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cd: sd0-cd {
+					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_wp: sd0-wp {
+					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_pwr: sd0-pwr {
+					rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus1: sd0-bus-width1 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus4: sd0-bus-width4 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd1 {
+				sd1_clk: sd1-clk {
+					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cmd: sd1-cmd {
+					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cd: sd1-cd {
+					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_wp: sd1-wp {
+					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus1: sd1-bus-width1 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus4: sd1-bus-width4 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 000000000000..0fcbcfd67de2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@1013d000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1013d000 0x1000>,
+			      <0x1013c100 0x0100>;
+		};
+
+		L2: l2-cache-controller@10138000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10138000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		global-timer@1013c200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1013c200 0x20>;
+			interrupts = <GIC_PPI 11 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		local-timer@1013c600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1013c600 0x20>;
+			interrupts = <GIC_PPI 13 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		uart0: serial@10124000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10124000 0x400>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 8>;
+			status = "disabled";
+		};
+
+		uart1: serial@10126000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10126000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 10>;
+			status = "disabled";
+		};
+
+		uart2: serial@20064000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20064000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 12>;
+			status = "disabled";
+		};
+
+		uart3: serial@20068000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20068000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 14>;
+			status = "disabled";
+		};
+
+		dwmmc@10214000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10214000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+
+		dwmmc@10218000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10218000 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
new file mode 100644
index 000000000000..a7d1c8ec150d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+	valid-mask = <0xfffffe1f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6400-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
new file mode 100644
index 000000000000..57e00f9bce99
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -0,0 +1,228 @@
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "FriendlyARM Mini6410 board based on S3C6410";
+	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "davicom,dm9000";
+			reg = <0x18000000 0x2 0x18000004 0x2>;
+			interrupt-parent = <&gpn>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			davicom,no-eeprom;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+		autorepeat;
+
+		button-k1 {
+			label = "K1";
+			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+			debounce-interval = <20>;
+		};
+
+		button-k2 {
+			label = "K2";
+			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+			debounce-interval = <20>;
+		};
+
+		button-k3 {
+			label = "K3";
+			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+			debounce-interval = <20>;
+		};
+
+		button-k4 {
+			label = "K4";
+			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+			debounce-interval = <20>;
+		};
+
+		button-k5 {
+			label = "K5";
+			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+			debounce-interval = <20>;
+		};
+
+		button-k6 {
+			label = "K6";
+			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+			debounce-interval = <20>;
+		};
+
+		button-k7 {
+			label = "K7";
+			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+			debounce-interval = <20>;
+		};
+
+		button-k8 {
+			label = "K8";
+			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led-1 {
+			label = "LED1";
+			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "LED2";
+			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-3 {
+			label = "LED3";
+			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "LED4";
+			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 1000000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_out>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pinctrl0 {
+	gpio_leds: gpio-leds {
+		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 000000000000..ecf35ec466f7
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,103 @@
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	compatible = "samsung,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
new file mode 100644
index 000000000000..eb4226b3407c
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6410";
+
+	aliases {
+		i2c1 = &i2c1;
+	};
+};
+
+&vic0 {
+	valid-mask = <0xffffff7f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	i2c1: i2c@7f00f000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x7f00f000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <5>;
+		clock-names = "i2c";
+		clocks = <&clocks PCLK_IIC1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
new file mode 100644
index 000000000000..b1197d8b04de
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	2
+
+&pinctrl0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpn: gpn {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpo: gpo {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp: gpp {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq: gpq {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa-0", "gpa-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa-2", "gpa-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa-4", "gpa-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa-6", "gpa-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_0: ext-dma-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_1: ext-dma-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_0: irda-data-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_1: irda-data-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_sdbw: irda-sdbw {
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb-5", "gpb-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <6>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_cs: spi0-cs {
+		samsung,pins = "gpc-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi1_cs: spi1-cs {
+		samsung,pins = "gpc-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpg-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus8: sd1-bus8 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+				"gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus1: sd2-bus1 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus4: sd2-bus4 {
+		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_cdclk: i2s0-cdclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_cdclk: i2s1-cdclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+				"gph-8", "gph-9";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_cdclk: i2s2-cdclk {
+		/* S3C6410-only */
+		samsung,pins = "gph-7";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_extclk: pcm0-extclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_extclk: pcm1-extclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_0: ac97-bus-0 {
+		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_1: ac97-bus-1 {
+		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_port: cam-port {
+		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
+				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_rst: cam-rst {
+		samsung,pins = "gpf-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_field: cam-field {
+		/* S3C6410-only */
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm_extclk: pwm-extclk {
+		samsung,pins = "gpf-13";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpf-15";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	clkout0: clkout-0 {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_0: keypad-col0-0 {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_0: keypad-col1-0 {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_0: keypad-col2-0 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_0: keypad-col3-0 {
+		samsung,pins = "gph-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_0: keypad-col4-0 {
+		samsung,pins = "gph-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_0: keypad-col5-0 {
+		samsung,pins = "gph-5";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_0: keypad-col6-0 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_0: keypad-col7-0 {
+		samsung,pins = "gph-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_1: keypad-col0-1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_1: keypad-col1-1 {
+		samsung,pins = "gpl-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_1: keypad-col2-1 {
+		samsung,pins = "gpl-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_1: keypad-col3-1 {
+		samsung,pins = "gpl-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_1: keypad-col4-1 {
+		samsung,pins = "gpl-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_1: keypad-col5-1 {
+		samsung,pins = "gpl-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_1: keypad-col6-1 {
+		samsung,pins = "gpl-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_1: keypad-col7-1 {
+		samsung,pins = "gpl-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_0: keypad-row0-0 {
+		samsung,pins = "gpk-8";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_0: keypad-row1-0 {
+		samsung,pins = "gpk-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_0: keypad-row2-0 {
+		samsung,pins = "gpk-10";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_0: keypad-row3-0 {
+		samsung,pins = "gpk-11";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_0: keypad-row4-0 {
+		samsung,pins = "gpk-12";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_0: keypad-row5-0 {
+		samsung,pins = "gpk-13";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_0: keypad-row6-0 {
+		samsung,pins = "gpk-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_0: keypad-row7-0 {
+		samsung,pins = "gpk-15";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_1: keypad-row0-1 {
+		samsung,pins = "gpn-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_1: keypad-row1-1 {
+		samsung,pins = "gpn-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_1: keypad-row2-1 {
+		samsung,pins = "gpn-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_1: keypad-row3-1 {
+		samsung,pins = "gpn-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_1: keypad-row4-1 {
+		samsung,pins = "gpn-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_1: keypad-row5-1 {
+		samsung,pins = "gpn-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_1: keypad-row6-1 {
+		samsung,pins = "gpn-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_1: keypad-row7-1 {
+		samsung,pins = "gpn-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
+				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
+				"gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
+				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	hsi_bus: hsi-bus {
+		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
new file mode 100644
index 000000000000..4e3be4d3493d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		pinctrl0 = &pinctrl0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s", "arm,arm1176";
+			reg = <0x0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic0: interrupt-controller@71200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@71300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		sdhci0: sdhci@7c200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c200000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@7c300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c300000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <25>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@7c400000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c400000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <17>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@7e004000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0x7e004000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks PCLK_WDT>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7f004000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x7f004000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <18>;
+			clock-names = "i2c";
+			clocks = <&clocks PCLK_IIC0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@7f005400 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005400 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <6>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart2: serial@7f005800 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005800 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart3: serial@7f005c00 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005c00 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7f006000 {
+			compatible = "samsung,s3c6400-pwm";
+			reg = <0x7f006000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>, <24>, <25>, <27>, <28>;
+			clock-names = "timers";
+			clocks = <&clocks PCLK_PWM>;
+			samsung,pwm-outputs = <0>, <1>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pinctrl0: pinctrl@7f008000 {
+			compatible = "samsung,s3c64xx-pinctrl";
+			reg = <0x7f008000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+
+			pctrl_int_map: pinctrl-interrupt-map {
+				interrupt-map = <0 &vic0 0>,
+						<1 &vic0 1>,
+						<2 &vic1 0>,
+						<3 &vic1 1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s3c64xx-wakeup-eint";
+				interrupts = <0>, <1>, <2>, <3>;
+				interrupt-parent = <&pctrl_int_map>;
+			};
+		};
+	};
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index a1d5e25a6698..5cdaba4cea86 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -31,7 +31,6 @@
 		gpio3 = &pioD;
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
-		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -48,6 +47,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
 	memory {
 		reg = <0x20000000 0x8000000>;
 	};
@@ -100,15 +104,6 @@
 				status = "disabled";
 			};
 
-			can0: can@f000c000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf000c000 0x300>;
-				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f0010000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
@@ -161,15 +156,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f0028000 {
-				compatible = "cdns,pc302-gem", "cdns,gem";
-				reg = <0xf0028000 0x100>;
-				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
-				status = "disabled";
-			};
-
 			isi: isi@f0034000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
@@ -190,19 +176,6 @@
 				#size-cells = <0>;
 			};
 
-			mmc2: mmc@f8004000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf8004000 0x600>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
-				dma-names = "rxtx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
 			spi1: spi@f8008000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -226,20 +199,6 @@
 				status = "disabled";
 			};
 
-			can1: can@f8010000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf8010000 0x300>;
-				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-			};
-
-			tcb1: timer@f8014000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8014000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-			};
-
 			adc0: adc@f8018000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf8018000 0x100>;
@@ -336,15 +295,6 @@
 				status = "disabled";
 			};
 
-			macb1: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				status = "disabled";
-			};
-
 			sha@f8034000 {
 				compatible = "atmel,sam9g46-sha";
 				reg = <0xf8034000 0x100>;
@@ -469,22 +419,6 @@
 					};
 				};
 
-				can0 {
-					pinctrl_can0_rx_tx: can0_rx_tx {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
-							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
-					};
-				};
-
-				can1 {
-					pinctrl_can1_rx_tx: can1_rx_tx {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
-							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
-					};
-				};
-
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
@@ -532,107 +466,6 @@
 					};
 				};
 
-				lcd {
-					pinctrl_lcd: lcd-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
-							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
-							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
-							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
-							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
-							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
-							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
-							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
-							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
-							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
-							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
-					};
-				};
-
-				macb0 {
-					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
-					};
-					pinctrl_macb0_data_gmii: macb0_data_gmii {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
-							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
-							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
-							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
-							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
-							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
-							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
-							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
-					};
-					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
-					};
-					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
-					};
-
-				};
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 						atmel,pins =
@@ -670,21 +503,6 @@
 					};
 				};
 
-				mmc2 {
-					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
-					};
-					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
-						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
-					};
-				};
-
 				nand0 {
 					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
 						atmel,pins =
@@ -743,22 +561,6 @@
 					};
 				};
 
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
-							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
-					};
-				};
-
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -1029,21 +831,30 @@
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges;
 			reg = <	0x60000000 0x01000000	/* EBI CS3 */
 				0xffffc070 0x00000490	/* SMC PMECC regs */
 				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
-				0x00100000 0x00100000	/* ROM code */
-				0x70000000 0x10000000	/* NFC Command Registers */
-				0xffffc000 0x00000070	/* NFC HSMC regs */
-				0x00200000 0x00100000	/* NFC SRAM banks */
+				0x00110000 0x00018000	/* ROM code */
 				>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
-			atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			status = "disabled";
+
+			nfc@70000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x70000000 0x10000000	/* NFC Command Registers */
+					0xffffc000 0x00000070	/* NFC HSMC regs */
+					0x00200000 0x00100000	/* NFC SRAM banks */
+					>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi
new file mode 100644
index 000000000000..7997dc9863ed
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 027bac7510b6..04eec0dfcf7d 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D31-EK";
-	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi
new file mode 100644
index 000000000000..39f832253caf
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index 99bd0c8e0471..cbd6a3ff1545 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D33-EK";
-	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi
new file mode 100644
index 000000000000..89cda2c0da39
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index fb8ee11cf282..878aa164275a 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D34-EK";
-	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi
new file mode 100644
index 000000000000..d20cd71b5f0e
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 509a53d9cc7b..9089c7c6cea8 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -7,11 +7,12 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
-	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
new file mode 100644
index 000000000000..8ed3260cef66
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -0,0 +1,54 @@
+/*
+ * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
new file mode 100644
index 000000000000..4d4f351f1f9f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
new file mode 100644
index 000000000000..0ba8be30ccd8
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,77 @@
+/*
+ * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "cdns,pc302-gem", "cdns,gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
new file mode 100644
index 000000000000..01f52a79f8ba
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,55 @@
+/*
+ * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd: lcd-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
new file mode 100644
index 000000000000..38e88e39e551
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,47 @@
+/*
+ * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 000000000000..5264bb4a6998
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,27 @@
+/*
+ * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
new file mode 100644
index 000000000000..98fcb2d57446
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -0,0 +1,53 @@
+/*
+ * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8050813a54..726a0f35100c 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -6,7 +6,6 @@
  *
  * Licensed under GPLv2 or later.
  */
-#include "sama5d3.dtsi"
 
 / {
 	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
@@ -47,8 +46,6 @@
 			atmel,has-pmecc;
 			atmel,pmecc-cap = <4>;
 			atmel,pmecc-sector-size = <512>;
-			atmel,has-nfc;
-			atmel,use-nfc-sram;
 			nand-on-flash-bbt;
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 7bf020ecadf5..249f65be2a50 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -23,4 +23,12 @@
 			reg = <0x0>;
 		};
 	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh7372";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e830ed..8ee06dd81799 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "KZM-A9-GT";
@@ -32,7 +33,7 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {
@@ -58,6 +59,24 @@
 		regulator-boot-on;
 	};
 
+	vmmc_sdhi0: regulator@2 {
+	        compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator@3 {
+	        compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	lan9220@10000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x10000000 0x100>;
@@ -70,9 +89,26 @@
 		vddvario-supply = <&reg_1p8v>;
 		vdd33a-supply = <&reg_3p3v>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &i2c0 {
+	status = "okay";
 	as3711@40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
@@ -145,20 +181,72 @@
 	};
 };
 
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
 	bus-width = <8>;
 	vmmc-supply = <&reg_1p8v>;
 	status = "okay";
 };
 
+&pfc {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmcif {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: scifa4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sdhi2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+};
+
 &sdhi0 {
-	vmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
 	bus-width = <4>;
 	status = "okay";
 };
 
 &sdhi2 {
-	vmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
 	bus-width = <4>;
 	broken-cd;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 7c4071e7790c..0f1ca7792c46 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b97750256003..fcf26889a8a0 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -38,6 +38,12 @@
 		      <0xf0000100 0x100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 55 4>,
+			     <0 56 4>;
+	};
+
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
@@ -129,6 +135,7 @@
 			      0 168 0x4
 			      0 169 0x4
 			      0 170 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6822000 {
@@ -141,6 +148,7 @@
 			      0 52 0x4
 			      0 53 0x4
 			      0 54 0x4>;
+		status = "disabled";
 	};
 
 	i2c2: i2c@e6824000 {
@@ -153,6 +161,7 @@
 			      0 172 0x4
 			      0 173 0x4
 			      0 174 0x4>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@e6826000 {
@@ -165,6 +174,7 @@
 			      0 184 0x4
 			      0 185 0x4
 			      0 186 0x4>;
+		status = "disabled";
 	};
 
 	i2c4: i2c@e6828000 {
@@ -177,6 +187,7 @@
 			      0 188 0x4
 			      0 189 0x4
 			      0 190 0x4>;
+		status = "disabled";
 	};
 
 	mmcif: mmcif@e6bd0000 {
@@ -190,7 +201,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -202,7 +213,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -213,7 +224,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4
@@ -222,4 +233,12 @@
 		cap-sd-highspeed;
 		status = "disabled";
 	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh73a0";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi
index 15994158a998..b5d7f36f33de 100644
--- a/arch/arm/boot/dts/skeleton64.dtsi
+++ b/arch/arm/boot/dts/skeleton64.dtsi
@@ -9,5 +9,5 @@
 	#size-cells = <2>;
 	chosen { };
 	aliases { };
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; reg = <0 0 0 0>; };
 };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index bee62a2cf6d6..6d09b8d42fdd 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -147,7 +147,7 @@
 							reg = <0x58>;
 						};
 
-						cfg_s2f_usr0_clk: cfg_s2f_usr0_clk {
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -198,7 +198,7 @@
 							reg = <0x98>;
 						};
 
-						s2f_usr1_clk: s2f_usr1_clk {
+						h2f_usr1_clk: h2f_usr1_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
@@ -235,7 +235,7 @@
 							reg = <0xD0>;
 						};
 
-						s2f_usr2_clk: s2f_usr2_clk {
+						h2f_usr2_clk: h2f_usr2_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
@@ -243,197 +243,197 @@
 						};
 					};
 
-				mpu_periph_clk: mpu_periph_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <4>;
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
 					};
 
-				mpu_l2_ram_clk: mpu_l2_ram_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <2>;
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
 					};
 
-				l4_main_clk: l4_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					clk-gate = <0x60 0>;
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
 					};
 
-				l3_main_clk: l3_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
 					};
 
-				l3_mp_clk: l3_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 0 2>;
-					clk-gate = <0x60 1>;
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
 					};
 
-				l3_sp_clk: l3_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 2 2>;
-				};
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 2 2>;
+					};
 
-				l4_mp_clk: l4_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 4 3>;
-					clk-gate = <0x60 2>;
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
 					};
 
-				l4_sp_clk: l4_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 7 3>;
-					clk-gate = <0x60 3>;
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
 					};
 
-				dbg_at_clk: dbg_at_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 0 2>;
-					clk-gate = <0x60 4>;
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
 					};
 
-				dbg_clk: dbg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 2 2>;
-					clk-gate = <0x60 5>;
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
 					};
 
-				dbg_trace_clk: dbg_trace_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x6C 0 3>;
-					clk-gate = <0x60 6>;
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
 					};
 
-				dbg_timer_clk: dbg_timer_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					clk-gate = <0x60 7>;
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
 					};
 
-				cfg_clk: cfg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 8>;
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
 					};
 
-				s2f_user0_clk: s2f_user0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 9>;
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
 					};
 
-				emac_0_clk: emac_0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac0_clk>;
-					clk-gate = <0xa0 0>;
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
 					};
 
-				emac_1_clk: emac_1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac1_clk>;
-					clk-gate = <0xa0 1>;
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
 					};
 
-				usb_mp_clk: usb_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 2>;
-					div-reg = <0xa4 0 3>;
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
 					};
 
-				spi_m_clk: spi_m_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 3>;
-					div-reg = <0xa4 3 3>;
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
 					};
 
-				can0_clk: can0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 4>;
-					div-reg = <0xa4 6 3>;
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
 					};
 
-				can1_clk: can1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 5>;
-					div-reg = <0xa4 9 3>;
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
 					};
 
-				gpio_db_clk: gpio_db_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 6>;
-					div-reg = <0xa8 0 24>;
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
 					};
 
-				s2f_user1_clk: s2f_user1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&s2f_usr1_clk>;
-					clk-gate = <0xa0 7>;
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
 					};
 
-				sdmmc_clk: sdmmc_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 8>;
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
 					};
 
-				nand_x_clk: nand_x_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 9>;
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
 					};
 
-				nand_clk: nand_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 10>;
-					fixed-divider = <4>;
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
 					};
 
-				qspi_clk: qspi_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
-					clk-gate = <0xa0 11>;
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
 					};
 				};
 			};
@@ -473,28 +473,29 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
 			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
 		};
 
 		timer0: timer0@ffc08000 {
-			compatible = "snps,dw-apb-timer-sp";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 167 4>;
 			reg = <0xffc08000 0x1000>;
 		};
 
 		timer1: timer1@ffc09000 {
-			compatible = "snps,dw-apb-timer-sp";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 168 4>;
 			reg = <0xffc09000 0x1000>;
 		};
 
 		timer2: timer2@ffd00000 {
-			compatible = "snps,dw-apb-timer-osc";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 169 4>;
 			reg = <0xffd00000 0x1000>;
 		};
 
 		timer3: timer3@ffd01000 {
-			compatible = "snps,dw-apb-timer-osc";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 170 4>;
 			reg = <0xffd01000 0x1000>;
 		};
@@ -516,9 +517,9 @@
 		};
 
 		rstmgr@ffd05000 {
-				compatible = "altr,rst-mgr";
-				reg = <0xffd05000 0x1000>;
-			};
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+		};
 
 		sysmgr@ffd08000 {
 				compatible = "altr,sys-mgr";
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
new file mode 100644
index 000000000000..a85b4043f888
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		serial0@ffc02000 {
+			clock-frequency = <100000000>;
+		};
+
+		serial1@ffc03000 {
+			clock-frequency = <100000000>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <25000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
new file mode 100644
index 000000000000..5beffb2265f4
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -0,0 +1,40 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 973999d2c697..a8716f6dbe2e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -19,26 +19,6 @@
 /include/ "socfpga.dtsi"
 
 / {
-	model = "Altera SOCFPGA Cyclone V";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
new file mode 100644
index 000000000000..2ee52ab8cabb
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,40 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 0248e433bc98..50b99a2c12ae 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -1,9 +1,5 @@
 /*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,21 +8,30 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
+/include/ "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
-#include <asm-generic/gpio.h>
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
 
-#endif
+&gmac1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
new file mode 100644
index 000000000000..e0799966bc25
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl {
+			uart0 {
+				uart0_default_mux: uart0_mux {
+					default_mux {
+						ste,function = "u0";
+						ste,pins = "u0_a_1";
+					};
+				};
+
+				uart0_default_mode: uart0_default {
+					default_cfg1 {
+						ste,pins = "GPIO0", "GPIO2";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						ste,pins = "GPIO1", "GPIO3";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart0_sleep_mode: uart0_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO0", "GPIO2";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						ste,pins = "GPIO1", "GPIO3";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			uart2 {
+				uart2_default_mode: uart2_default {
+					default_mux {
+						ste,function = "u2";
+						ste,pins = "u2txrx_a_1";
+					};
+
+					default_cfg1 {
+						ste,pins = "GPIO120";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						ste,pins = "GPIO121";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart2_sleep_mode: uart2_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO120";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						ste,pins = "GPIO121";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			i2c0 {
+				i2c0_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c0";
+						ste,pins = "i2c0_a_1";
+					};
+				};
+
+				i2c0_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO147", "GPIO148";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c0_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO147", "GPIO148";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c1 {
+				i2c1_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c1";
+						ste,pins = "i2c1_b_2";
+					};
+				};
+
+				i2c1_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO16", "GPIO17";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c1_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO16", "GPIO17";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c2 {
+				i2c2_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c2";
+						ste,pins = "i2c2_b_2";
+					};
+				};
+
+				i2c2_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO10", "GPIO11";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c2_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO11", "GPIO11";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c4 {
+				i2c4_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c4";
+						ste,pins = "i2c4_b_2";
+					};
+				};
+
+				i2c4_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO122", "GPIO123";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c4_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO122", "GPIO123";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c5 {
+				i2c5_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c5";
+						ste,pins = "i2c5_c_2";
+					};
+				};
+
+				i2c5_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO118", "GPIO119";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c5_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO118", "GPIO119";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
new file mode 100644
index 000000000000..7f3baf51a3a9
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+#include "ste-ccu8540-pinctrl.dtsi"
+
+/ {
+	model = "ST-Ericsson U8540 platform with Device Tree";
+	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+	memory@0 {
+		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "stericsson,db8540-pinctrl";
+		};
+
+		prcmu@80157000 {
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+			pinctrl-1 = <&uart0_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_default_mode>;
+			pinctrl-1 = <&uart2_sleep_mode>;
+			status = "okay";
+		};
+
+		i2c0: i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c1: i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c2: i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+		};
+
+		i2c3: i2c@80110000 {
+			status = "disabled";
+		};
+
+		i2c4: i2c@8012a000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
+			pinctrl-1 = <&i2c4_sleep_mode>;
+		};
+
+		i2c5: i2c@80001000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
+			pinctrl-1 = <&i2c5_sleep_mode>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index ed29ec7288e4..229508750890 100644
--- a/arch/arm/boot/dts/ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a1529455f081..7da99fe497e1 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
 #include "skeleton.dtsi"
 
 / {
@@ -42,16 +43,56 @@
 			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
 			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+
+			clocks = <&smp_twd_clk>;
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpio0: gpio@8012e000 {
@@ -65,6 +106,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <0>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio1: gpio@8012e080 {
@@ -78,6 +121,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <1>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio2: gpio@8000e000 {
@@ -91,6 +136,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <2>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio3: gpio@8000e080 {
@@ -104,6 +151,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <3>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio4: gpio@8000e100 {
@@ -117,6 +166,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <4>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio5: gpio@8000e180 {
@@ -130,6 +181,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <5>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio6: gpio@8011e000 {
@@ -143,6 +196,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio7: gpio@8011e080 {
@@ -156,6 +211,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio8: gpio@a03fe000 {
@@ -169,6 +226,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
+
+			clocks = <&prcc_pclk 5 1>;
 		};
 
 		pinctrl {
@@ -177,8 +236,7 @@
 		};
 
 		usb_per5@a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
+			compatible = "stericsson,db8500-musb";
 			reg = <0xa03e0000 0x10000>;
 			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
@@ -210,6 +268,8 @@
 				    "iep_6_14", "oep_6_14",
 				    "iep_7_15", "oep_7_15",
 				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
 		};
 
 		dma: dma-controller@801C0000 {
@@ -220,6 +280,8 @@
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
 		};
 
 		prcmu: prcmu@80157000 {
@@ -238,6 +300,13 @@
 				reg = <0x80157450 0xC>;
 			};
 
+			cpufreq {
+				compatible = "stericsson,cpufreq-ux500";
+				clocks = <&prcmu_clk PRCMU_ARMSS>;
+				clock-names = "armss";
+				status = "disabled";
+			};
+
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
@@ -245,7 +314,7 @@
 					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
 				status = "disabled";
-			 };
+			};
 
 			db8500-prcmu-regulators {
 				compatible = "stericsson,db8500-prcmu-regulator";
@@ -457,8 +526,36 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
+				ext_regulators: ab8500-ext-regulators {
+					compatible = "stericsson,ab8500-ext-regulator";
+
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-compatible = "ab8500_ext1";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext2_reg: ab8500_ext2 {
+						regulator-compatible = "ab8500_ext2";
+						regulator-min-microvolt = <1360000>;
+						regulator-max-microvolt = <1360000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext3_reg: ab8500_ext3 {
+						regulator-compatible = "ab8500_ext3";
+						regulator-min-microvolt = <3400000>;
+						regulator-max-microvolt = <3400000>;
+						regulator-boot-on;
+					};
+				};
+
 				ab8500-regulators {
 					compatible = "stericsson,ab8500-regulator";
+					vin-supply = <&ab8500_ext3_reg>;
 
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
@@ -531,65 +628,74 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		ssp@80002000 {
@@ -598,7 +704,80 @@
 			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disabled";
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "ssp0clk", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		ssp@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "ssp1clk", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "spi0clk", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "spi1clk", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "spi2clk", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "spi3clk", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
 		};
 
 		uart@80120000 {
@@ -610,6 +789,9 @@
 			       <&dma 13 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -622,6 +804,9 @@
 			       <&dma 12 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -634,6 +819,9 @@
 			       <&dma 11 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -646,6 +834,9 @@
 			       <&dma 29 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -658,6 +849,9 @@
 			       <&dma 32 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -670,6 +864,9 @@
 			       <&dma 28 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -677,6 +874,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -689,6 +890,9 @@
 			       <&dma 42 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -696,6 +900,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -704,6 +912,10 @@
 			reg = <0x80123000 0x1000>;
 			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -712,6 +924,10 @@
 			reg = <0x80124000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -721,6 +937,10 @@
 			reg = <0x80117000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -729,6 +949,10 @@
 			reg = <0x80125000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -744,7 +968,7 @@
 		cpufreq-cooling {
 			compatible = "stericsson,db8500-cpufreq-cooling";
 			status = "disabled";
-		 };
+		};
 
 		vmmci: regulator-gpio {
 			compatible = "regulator-gpio";
@@ -769,6 +993,7 @@
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
 		};
 
 		hash@a03c2000 {
@@ -776,6 +1001,7 @@
 			reg = <0xa03c2000 0x1000>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 524e33240ad4..76704ec0ffcc 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -57,7 +57,6 @@
 			bu21013_tp@5c {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5c>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
@@ -68,7 +67,6 @@
 			bu21013_tp@5d {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5d>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
new file mode 100644
index 000000000000..76d3ef13175f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the TVK1281618 UIB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	soc {
+		/* Add Synaptics touch screen, TC35892 keypad etc here */
+		i2c@80004000 {
+			tc3589x@44 {
+				compatible = "tc3589x";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 9db41b9d8358..aa3f02060fdd 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -10,7 +10,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	memory {
@@ -41,28 +41,6 @@
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
 		i2c@80128000 {
 			lp5521@33 {
 				compatible = "national,lp5521";
@@ -72,6 +50,7 @@
 				chan0 {
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					linux,default-trigger = "heartbeat";
 				};
 				chan1 {
 					led-cur = /bits/ 8 <0x2f>;
@@ -102,7 +81,7 @@
 			};
 			bh1780@29 {
 				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
+				reg = <0x29>;
 			};
 		};
 
@@ -167,89 +146,11 @@
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
+			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
 				};
-			};
 
-			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
new file mode 100644
index 000000000000..2b1cb5b584b6
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
new file mode 100644
index 000000000000..59523f866812
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index c6bb07df2d1d..b2cd7bc2752f 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -7,17 +7,14 @@
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
  */
 
-/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
 
 / {
-	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
 	gpio_keys {
 		button@1 {
 			gpios = <&tc3589x_gpio 7 0x4>;
@@ -25,24 +22,30 @@
 	};
 
 	soc {
-		prcmu@80157000 {
-			ab8500@5 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-			};
-		};
-
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
 				reg = <0x33>;
 			};
-		};
 
-		i2c@80110000 {
-			bu21013_tp@5c {
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
new file mode 100644
index 000000000000..8c6a2de56cf1
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
new file mode 100644
index 000000000000..d53cccdce776
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 95892ec6c342..aed511b47a9e 100644
--- a/arch/arm/boot/dts/u9540.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -9,30 +9,20 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
 
 / {
-	model = "ST-Ericsson U9540 platform with Device Tree";
-	compatible = "st-ericsson,u9540";
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc-u9500 {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
+	gpio_keys {
+		button@1 {
+			gpios = <&gpio5 25 0x4>;
 		};
+	};
 
+	soc {
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
@@ -42,22 +32,30 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			cd-gpios  = <&gpio7 6 0x4>; // 230
-			cd-inverted;
+			cd-gpios  = <&gpio2 31 0x4>; // 95
 
 			status = "okay";
 		};
 
-
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
 		};
 
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 000000000000..efddee9403c4
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+	in_nopull: in_nopull {
+		ste,input = <INPUT_NOPULL>;
+	};
+
+	in_pu: input_pull_up {
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	in_pd: input_pull_down {
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	out_hi: output_high {
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	out_lo: output_low {
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_out_lo: gpio_output_low {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	slpm_in_pu: slpm_in_pu {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo: slpm_out_lo {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi: slpm_out_hi {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis: in_wkup_pdis {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_hi_wkup_pdis: out_hi_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_wkup_pdis: out_wkup_pdis {
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index a3acfa7b3dc9..79425e3836ce 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -140,18 +140,30 @@
 			};
 		};
 		i2c0 {
+			i2c0_default_mux: i2c0_mux {
+				i2c0_default_mux {
+					ste,function = "i2c0";
+					ste,pins = "i2c0_a_1";
+				};
+			};
 			i2c0_default_mode: i2c0_default {
 				i2c0_default_cfg {
 					ste,pins = "GPIO62_D3", "GPIO63_D2";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
 		i2c1 {
+			i2c1_default_mux: i2c1_mux {
+				i2c1_default_mux {
+					ste,function = "i2c1";
+					ste,pins = "i2c1_a_1";
+				};
+			};
 			i2c1_default_mode: i2c1_default {
 				i2c1_default_cfg {
 					ste,pins = "GPIO53_L4", "GPIO54_L3";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
@@ -159,7 +171,7 @@
 			i2c2_default_mode: i2c2_default {
 				i2c2_default_cfg {
 					ste,pins = "GPIO73_C21", "GPIO74_C20";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
@@ -641,6 +653,7 @@
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 		clocks = <&hclksmc>;
 		status = "okay";
+		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
 
 		partition@0 {
 		label = "X-Loader(NAND)";
@@ -682,29 +695,43 @@
 
 	/* I2C0 connected to the STw4811 power management chip */
 	i2c0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio1 31 0>, /* sda */
-			<&gpio1 30 0>; /* scl */
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f8000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <20>;
+		clock-frequency = <100000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&i2c0clk>, <&pclki2c0>;
+		clock-names = "mclk", "apb_pclk";
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_default_mode>;
+		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
 
 		stw4811@2d {
-			   compatible = "st,stw4811";
-			   reg = <0x2d>;
+			compatible = "st,stw4811";
+			reg = <0x2d>;
+			vmmc_regulator: vmmc {
+				compatible = "st,stw481x-vmmc";
+				regulator-name = "VMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
 		};
 	};
 
 	/* I2C1 connected to various sensors */
 	i2c1 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio1 22 0>, /* sda */
-			<&gpio1 21 0>; /* scl */
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f7000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <21>;
+		clock-frequency = <100000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&i2c1clk>, <&pclki2c1>;
+		clock-names = "mclk", "apb_pclk";
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_default_mode>;
+		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
 
 		camera@2d {
 			   compatible = "st,camera";
@@ -819,6 +846,7 @@
 			cd-inverted;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+			vmmc-supply = <&vmmc_regulator>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 49824be66845..f0b39f835914 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -111,12 +111,13 @@
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;
 
-
 				reg-shift = <1>;
 				reg-io-width = <2>;
 				smsc,force-internal-phy;
 				smsc,irq-active-high;
 				smsc,irq-push-pull;
+
+				clocks = <&prcc_pclk 3 0>;
 			};
 		};
 
@@ -165,119 +166,13 @@
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				//compatible = "tc3589x";
-				reg = <0x42>;
-				gpios = <&gpio6 25 0x4>;
-				interrupt-parent = <&gpio6>;
-			};
-			tps61052@33 {
-				//compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
-
-		i2c@80128000 {
-			lp5521@33 {
-				// compatible = "lp5521";
-				reg = <0x33>;
-			};
-			lp5521@34 {
-				// compatible = "lp5521";
-				reg = <0x34>;
-			};
-			bh1780@29 {
-				// compatible = "rohm,bh1780gli";
-				reg = <0x33>;
-			};
-		};
-
 		cpufreq-cooling {
 			status = "okay";
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
+			cpufreq {
+				status = "okay";
 			};
 
 			thermal@801573c0 {
@@ -310,6 +205,20 @@
 					compatible = "stericsson,ab8500-gpio";
 				};
 
+				ext_regulators: ab8500-ext-regulators {
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-name = "ab8500-ext-supply1";
+					};
+
+					ab8500_ext2_reg_reg: ab8500_ext2 {
+						regulator-name = "ab8500-ext-supply2";
+					};
+
+					ab8500_ext3_reg_reg: ab8500_ext3 {
+						regulator-name = "ab8500-ext-supply3";
+					};
+				};
+
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
new file mode 100644
index 000000000000..eb4d73b6a090
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			phy-supply = <&reg_emac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			emac_power_pin_a1000: emac_power_pin@0 {
+				allwinner,pins = "PH15";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_a1000: led_pins@0 {
+				allwinner,pins = "PH10", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a1000>;
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 0>;
+		};
+
+		blue {
+			label = "a1000:blue:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_emac_3v3: emac-3v3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_power_pin_a1000>;
+			regulator-name = "emac-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pio 7 15 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 757c4cd900ee..425a7db898c5 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -26,7 +26,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -76,12 +76,12 @@
 		pinctrl-0 = <&led_pins_cubieboard>;
 
 		blue {
-			label = "cubieboard::blue";
+			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 0>; /* LED1 */
 		};
 
 		green {
-			label = "cubieboard::green";
+			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 0>; /* LED2 */
 			linux,default-trigger = "heartbeat";
 		};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3514b37d66bc..b3ae51fa9372 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 078ed7f618d7..0c1447c68059 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b2bd6e124250..319cc6b509da 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -160,11 +160,10 @@
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {
@@ -267,6 +266,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 64dc0c42c43a..3c9f8b3cd3e3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,7 +18,7 @@
 	model = "Olimex A10s-Olinuxino Micro";
 	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -60,6 +60,31 @@
 			pinctrl-0 = <&uart3_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+
+			at24@50 {
+				compatible = "at,24c16";
+				pagesize = <16>;
+				reg = <0x50>;
+				read-only;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2307ce827ae0..52476742a104 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -95,20 +95,16 @@
 
 		ahb_gates: ahb_gates@01c20060 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-ahb-gates-clk";
+			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
 		};
 
 		apb0: apb0@01c20054 {
@@ -120,12 +116,11 @@
 
 		apb0_gates: apb0_gates@01c20068 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb0-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
+			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+				"apb0_ir", "apb0_keypad";
 		};
 
 		/* dummy is pll62 */
@@ -145,23 +140,19 @@
 
 		apb1_gates: apb1_gates@01c2006c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb1-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
+				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3";
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {
@@ -229,6 +220,27 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -243,6 +255,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -282,5 +299,38 @@
 			clocks = <&apb1_gates 19>;
 			status = "disabled";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 80497e376706..9e508dcc4245 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		pinctrl@01c20800 {
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 7363211daf84..ce8ef2a45be0 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,11 +150,10 @@
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		intc: interrupt-controller@01c20400 {
@@ -223,6 +222,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
new file mode 100644
index 000000000000..e5adae30899b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
new file mode 100644
index 000000000000..c1751a64889a
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -0,0 +1,299 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb1_mux: ahb1_mux@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+		};
+
+		ahb1_gates: ahb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+		};
+
+		apb1_gates: apb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		apb2: apb2@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+		};
+
+		apb2_gates: apb2_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <0 18 1>,
+				     <0 19 1>,
+				     <0 20 1>,
+				     <0 21 1>,
+				     <0 22 1>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 0 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 1 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 2 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 3 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 4 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <0 5 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 21>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 000000000000..5c51cb8a98b0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			led_pins_cubieboard2: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 000000000000..8a1009d6c829
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubietruck: led_pins@0 {
+				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 0>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 0>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 000000000000..ead3013f9aca
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart6: serial@01c29800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pins_a>;
+			status = "okay";
+		};
+
+		uart7: serial@01c29c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart7_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
new file mode 100644
index 000000000000..e46cfedde74c
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>;
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+		};
+
+		ahb_gates: ahb_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+				"ahb_nand", "ahb_sdram", "ahb_ace",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_spi3", "ahb_sata",
+				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
+				"ahb_mali";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+		};
+
+		apb0_gates: apb0_gates@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_pio", "apb0_ir0", "apb0_ir1",
+				"apb0_iis2", "apb0_keypad";
+		};
+
+		apb1_mux: apb1_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6>, <&osc32k>;
+		};
+
+		apb1: apb1@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb1_mux>;
+		};
+
+		apb1_gates: apb1_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_i2c3", "apb1_can",
+				"apb1_scr", "apb1_ps20", "apb1_ps21",
+				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3", "apb1_uart4",
+				"apb1_uart5", "apb1_uart6", "apb1_uart7";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <0 55 1>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio@01c0b080 {
+			compatible = "allwinner,sun4i-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 28 1>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <0 22 1>,
+				     <0 23 1>,
+				     <0 24 1>,
+				     <0 25 1>,
+				     <0 67 1>,
+				     <0 68 1>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 1 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 2 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 3 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 4 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 17 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <0 18 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <0 19 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <0 20 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 7 1>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 8 1>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 9 1>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 88 1>;
+			clocks = <&apb1_gates 3>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@01c2bc00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <0 89 1>;
+			clocks = <&apb1_gates 15>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb640eb6c932..cb5ec23b03a7 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra114.dtsi"
 
 / {
@@ -738,6 +739,14 @@
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 
 	i2c@7000d000 {
@@ -791,7 +800,7 @@
 					regulator-boot-on;
 				};
 
-				dcdc3 {
+				tps65090_dcdc3_reg: dcdc3 {
 					regulator-name = "vdd-ao";
 					regulator-always-on;
 					regulator-boot-on;
@@ -836,6 +845,195 @@
 				};
 			};
 		};
+
+		palmas: tps65913 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+				smps1-in-supply = <&tps65090_dcdc3_reg>;
+				smps3-in-supply = <&tps65090_dcdc3_reg>;
+				smps4-in-supply = <&tps65090_dcdc2_reg>;
+				smps7-in-supply = <&tps65090_dcdc2_reg>;
+				smps8-in-supply = <&tps65090_dcdc2_reg>;
+				smps9-in-supply = <&tps65090_dcdc2_reg>;
+				ldo1-in-supply = <&tps65090_dcdc2_reg>;
+				ldo2-in-supply = <&tps65090_dcdc2_reg>;
+				ldo3-in-supply = <&palmas_smps3_reg>;
+				ldo4-in-supply = <&tps65090_dcdc2_reg>;
+				ldo5-in-supply = <&vdd_ac_bat_reg>;
+				ldo6-in-supply = <&tps65090_dcdc2_reg>;
+				ldo7-in-supply = <&tps65090_dcdc2_reg>;
+				ldo8-in-supply = <&tps65090_dcdc3_reg>;
+				ldo9-in-supply = <&palmas_smps9_reg>;
+				ldoln-in-supply = <&tps65090_dcdc1_reg>;
+				ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+				regulators {
+					smps12 {
+						regulator-name = "vddio-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps3_reg: smps3 {
+						regulator-name = "vddio-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps9_reg: smps9 {
+						regulator-name = "sdhci-vdd-sd-slot";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					ldo1 {
+						regulator-name = "avdd-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo2 {
+						regulator-name = "avdd-cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo3 {
+						regulator-name = "avdd-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					palmas_ldo6_reg: ldo6 {
+						regulator-name = "vdd-sensor-2v85";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-af-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <900000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					ldo9 {
+						regulator-name = "vddio-sdmmc-2";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "hvdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+		};
 	};
 
 	spi@7000da00 {
@@ -850,6 +1048,13 @@
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	ahub {
@@ -870,6 +1075,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -883,6 +1097,35 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -951,6 +1194,16 @@
 			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			vin-supply = <&tps65090_dcdc1_reg>;
 		};
+
+		vdd_cam_1v8_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam_1v8_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&palmas_gpio 6 0>;
+		};
 	};
 
 	sound {
@@ -964,7 +1217,9 @@
 			"Speakers", "SPORP",
 			"Speakers", "SPORN",
 			"Speakers", "SPOLP",
-			"Speakers", "SPOLN";
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts
deleted file mode 100644
index d5f8d3e0bde2..000000000000
--- a/arch/arm/boot/dts/tegra114-pluto.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/dts-v1/;
-
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA Tegra114 Pluto evaluation board";
-	compatible = "nvidia,pluto", "nvidia,tegra114";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pmc {
-		nvidia,invert-interrupt;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index abf6c40d28c6..8d42787c8ff1 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -318,9 +318,9 @@
 
 	iommu {
 		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
-		reg = <0x7000f010 0x02c
-		       0x7000f1f0 0x010
-		       0x7000f228 0x074>;
+		reg = <0x70019010 0x02c
+		       0x700191f0 0x010
+		       0x70019228 0x074>;
 		nvidia,#asids = <4>;
 		dma-window = <0 0x40000000>;
 		nvidia,swgroups = <0x18659fe>;
@@ -430,6 +430,68 @@
 		status = "disable";
 	};
 
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
new file mode 100644
index 000000000000..431d67a2b413
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -0,0 +1,27 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
new file mode 100644
index 000000000000..b7413004ee77
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -0,0 +1,149 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006400 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 5592be6f2f7a..d5c9bca01232 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -363,7 +363,7 @@
 	};
 
 	pmc {
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index d9f89cd879a7..e156ab30e763 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -335,7 +335,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				pci_clk_reg: ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -417,7 +417,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -425,6 +425,20 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
 	usb@c5000000 {
 		status = "okay";
 	};
@@ -643,7 +657,7 @@
 			enable-active-high;
 		};
 
-		regulator@3 {
+		pci_vdd_reg: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "vdd_1v05";
@@ -651,8 +665,6 @@
 			regulator-max-microvolt = <1050000>;
 			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			/* Hack until board-harmony-pcie.c is removed */
-			status = "disabled";
 		};
 
 		regulator@4 {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index cfd12763b1b2..8d71fc9d8a2f 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -417,7 +417,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <0>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c8242533268f..315aae26c3cd 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -518,7 +518,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -828,7 +828,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 24 0>; /* PD0 */
+			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index c54faae7cfb3..7726dab3d08d 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -366,7 +366,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				pci_clk_reg: ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -459,7 +459,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -467,6 +467,11 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+	};
+
 	usb@c5008000 {
 		status = "okay";
 	};
@@ -509,5 +514,15 @@
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 		};
+
+		pci_vdd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index c572c43751b1..3ada3cb67f07 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -32,6 +32,14 @@
 		};
 	};
 
+	pcie-controller {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
 	sound {
 		compatible = "ad,tegra-audio-wm8903-tec",
 			     "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 1e9d33adb925..78deea5c0d21 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -302,7 +302,7 @@
 	};
 
 	pmc {
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -310,6 +310,16 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
 	usb@c5000000 {
 		status = "okay";
 	};
@@ -410,10 +420,28 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 170 0>; /* PV2 */
+			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		pci_clk_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "pci_clk";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pci_vdd_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "pci_vdd";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 7f8c28d1121f..aab872cd0530 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -494,7 +494,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <100>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index c703197dca6e..d33a73cf167c 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -497,7 +497,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <1000>;
 		nvidia,core-pwr-good-time = <0 3845>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index e4570834512e..df40b54fd8bc 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -455,6 +455,61 @@
 		#size-cells = <0>;
 	};
 
+	pcie-controller {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 87c5f7b7c271..08cad696e89f 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -10,6 +10,40 @@
 		reg = <0x80000000 0x7ff00000>;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&sys_3v3_pexs_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -76,6 +110,11 @@
 				nvidia,pull = <0>;
 				nvidia,tristate = <0>;
 			};
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins =	"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,pull = <2>;
+			};
 			sdio3 {
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <0>;
@@ -85,6 +124,10 @@
 				nvidia,slew-rate-rising = <1>;
 				nvidia,slew-rate-falling = <1>;
 			};
+			gpv {
+				nvidia,pins = "drive_gpv";
+				nvidia,pull-up-strength = <16>;
+			};
 		};
 	};
 
@@ -107,7 +150,7 @@
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c700 {
+	hdmiddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
@@ -262,7 +305,7 @@
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <200>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -285,6 +328,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -357,7 +409,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v_in_reg>;
 		};
@@ -369,7 +421,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v_in_reg>;
 		};
@@ -421,7 +473,9 @@
 
 		nvidia,audio-routing =
 			"Headphones", "HPOR",
-			"Headphones", "HPOL";
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index f65b53d32416..5ea7dfa4d9fa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -31,6 +31,26 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pex_hvdd_3v3_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -173,19 +193,6 @@
 			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
 		};
 
-		tps62361 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -286,6 +293,27 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		tps62361 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
 	};
 
 	spi@7000da00 {
@@ -307,7 +335,7 @@
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <200>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -330,6 +358,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d8783f0fae63..2bd55cfd88ad 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -16,6 +16,76 @@
 		serial4 = &uarte;
 	};
 
+	pcie-controller {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PCIEX>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
 	host1x {
 		compatible = "nvidia,tegra30-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -66,12 +136,13 @@
 		gr3d {
 			compatible = "nvidia,tegra30-gr3d";
 			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car 24 &tegra_car 98>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D
+				  &tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra30-dc";
+			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
@@ -561,6 +632,92 @@
 		status = "disabled";
 	};
 
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
new file mode 100644
index 000000000000..c843720bd3e5
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
@@ -0,0 +1,58 @@
+
+/ {
+	testcase-data {
+		interrupts {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			test_intc0: intc0 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			test_intc1: intc1 {
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			test_intc2: intc2 {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			test_intmap0: intmap0 {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				interrupt-map = <1 &test_intc0 9>,
+						<2 &test_intc1 10 11 12>,
+						<3 &test_intc2 13 14>,
+						<4 &test_intc2 15 16>;
+			};
+
+			test_intmap1: intmap1 {
+				#interrupt-cells = <2>;
+				interrupt-map = <0x5000 1 2 &test_intc0 15>;
+			};
+
+			interrupts0 {
+				interrupt-parent = <&test_intc0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts1 {
+				interrupt-parent = <&test_intmap0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts-extended0 {
+				reg = <0x5000 0x100>;
+				interrupts-extended = <&test_intc0 1>,
+						      <&test_intc1 2 3 4>,
+						      <&test_intc2 5 6>,
+						      <&test_intmap0 1>,
+						      <&test_intmap0 2>,
+						      <&test_intmap0 3>,
+						      <&test_intmap1 1 2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
index a7c5067622e8..3f123ecc9dd7 100644
--- a/arch/arm/boot/dts/testcases/tests.dtsi
+++ b/arch/arm/boot/dts/testcases/tests.dtsi
@@ -1 +1,2 @@
 /include/ "tests-phandle.dtsi"
+/include/ "tests-interrupts.dtsi"
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ae6a17aed9ee..fb1b2ec8eaa9 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -23,6 +23,22 @@
 		compatible = "ti,twl4030-wdt";
 	};
 
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl4030-vaux1";
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl4030-vaux3";
+	};
+
+	vaux4: regulator-vaux4 {
+		compatible = "ti,twl4030-vaux4";
+	};
+
 	vcc: regulator-vdd1 {
 		compatible = "ti,twl4030-vdd1";
 		regulator-min-microvolt = <600000>;
@@ -35,10 +51,20 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vpll2: regulator-vpll2 {
-		compatible = "ti,twl4030-vpll2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+	vio: regulator-vio {
+		compatible = "ti,twl4030-vio";
+	};
+
+	vintana1: regulator-vintana1 {
+		compatible = "ti,twl4030-vintana1";
+	};
+
+	vintana2: regulator-vintana2 {
+		compatible = "ti,twl4030-vintana2";
+	};
+
+	vintdig: regulator-vintdig {
+		compatible = "ti,twl4030-vintdig";
 	};
 
 	vmmc1: regulator-vmmc1 {
@@ -65,6 +91,16 @@
 		compatible = "ti,twl4030-vusb3v1";
 	};
 
+	vpll1: regulator-vpll1 {
+		compatible = "ti,twl4030-vpll1";
+	};
+
+	vpll2: regulator-vpll2 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vsim: regulator-vsim {
 		compatible = "ti,twl4030-vsim";
 		regulator-min-microvolt = <1800000>;
@@ -86,6 +122,7 @@
 		usb1v8-supply = <&vusb1v8>;
 		usb3v1-supply = <&vusb3v1>;
 		usb_mode = <1>;
+		#phy-cells = <0>;
 	};
 
 	twl_pwm: pwm {
@@ -97,4 +134,9 @@
 		compatible = "ti,twl4030-pwmled";
 		#pwm-cells = <2>;
 	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
new file mode 100644
index 000000000000..a4fa5703c42b
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index dde75ae8b4b1..e01e5a081def 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -185,7 +185,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22 34>;
+				interrupts-extended = <&vic 22 &sic 2>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 7e8175269064..f43907c40c93 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23 34>;
+				interrupts-extended = <&vic 23 &sic 2>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index d2803be4e1a8..15f98cbcb75a 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -37,30 +37,35 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu4: cpu@4 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
 		};
 	};
 
@@ -104,6 +109,26 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
 	memory-controller@7ffd0000 {
 		compatible = "arm,pl354", "arm,primecell";
 		reg = <0 0x7ffd0000 0 0x1000>;
@@ -125,6 +150,12 @@
 		clock-names = "apb_pclk";
 	};
 
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 000000000000..c42e4f938dcd
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1_1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index b3905f5bcaf9..c8047ca16501 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -36,6 +36,23 @@
 
 };
 
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0_1>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@@ -50,6 +67,13 @@
 	status = "okay";
 };
 
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 67d929cf9804..d31ce1b4a7b0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -123,6 +123,18 @@
 				status = "disabled";
 			};
 
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <0 67 0x04>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 6f54a64850eb..e7f73b2e4550 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -41,8 +41,8 @@
 		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <2 3 2>;
-			arm,tag-latency = <2 3 2>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
 			cache-unified;
 			cache-level = <2>;
 		};
@@ -92,6 +92,14 @@
 			};
 		};
 
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
 		ttc0: ttc0@f8001000 {
 			interrupt-parent = <&intc>;
 			interrupts = < 0 10 4 0 11 4 0 12 4 >;
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 06ea7d42ce8e..2a45092a40e3 100644
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8c60f473e976..4bdc41622c36 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@ obj-y				+= firmware.o
 
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
@@ -17,3 +16,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
 obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
+obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
+obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
new file mode 100644
index 000000000000..5774b6ea7ad5
--- /dev/null
+++ b/arch/arm/common/bL_switcher.c
@@ -0,0 +1,822 @@
+/*
+ * arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver
+ *
+ * Created by:	Nicolas Pitre, March 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/clockchips.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/notifier.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/moduleparam.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cputype.h>
+#include <asm/suspend.h>
+#include <asm/mcpm.h>
+#include <asm/bL_switcher.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/power_cpu_migrate.h>
+
+
+/*
+ * Use our own MPIDR accessors as the generic ones in asm/cputype.h have
+ * __attribute_const__ and we don't want the compiler to assume any
+ * constness here as the value _does_ change along some code paths.
+ */
+
+static int read_mpidr(void)
+{
+	unsigned int id;
+	asm volatile ("mrc p15, 0, %0, c0, c0, 5" : "=r" (id));
+	return id & MPIDR_HWID_BITMASK;
+}
+
+/*
+ * Get a global nanosecond time stamp for tracing.
+ */
+static s64 get_ns(void)
+{
+	struct timespec ts;
+	getnstimeofday(&ts);
+	return timespec_to_ns(&ts);
+}
+
+/*
+ * bL switcher core code.
+ */
+
+static void bL_do_switch(void *_arg)
+{
+	unsigned ib_mpidr, ib_cpu, ib_cluster;
+	long volatile handshake, **handshake_ptr = _arg;
+
+	pr_debug("%s\n", __func__);
+
+	ib_mpidr = cpu_logical_map(smp_processor_id());
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	/* Advertise our handshake location */
+	if (handshake_ptr) {
+		handshake = 0;
+		*handshake_ptr = &handshake;
+	} else
+		handshake = -1;
+
+	/*
+	 * Our state has been saved at this point.  Let's release our
+	 * inbound CPU.
+	 */
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, cpu_resume);
+	sev();
+
+	/*
+	 * From this point, we must assume that our counterpart CPU might
+	 * have taken over in its parallel world already, as if execution
+	 * just returned from cpu_suspend().  It is therefore important to
+	 * be very careful not to make any change the other guy is not
+	 * expecting.  This is why we need stack isolation.
+	 *
+	 * Fancy under cover tasks could be performed here.  For now
+	 * we have none.
+	 */
+
+	/*
+	 * Let's wait until our inbound is alive.
+	 */
+	while (!handshake) {
+		wfe();
+		smp_mb();
+	}
+
+	/* Let's put ourself down. */
+	mcpm_cpu_power_down();
+
+	/* should never get here */
+	BUG();
+}
+
+/*
+ * Stack isolation.  To ensure 'current' remains valid, we just use another
+ * piece of our thread's stack space which should be fairly lightly used.
+ * The selected area starts just above the thread_info structure located
+ * at the very bottom of the stack, aligned to a cache line, and indexed
+ * with the cluster number.
+ */
+#define STACK_SIZE 512
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+static int bL_switchpoint(unsigned long _arg)
+{
+	unsigned int mpidr = read_mpidr();
+	unsigned int clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	void *stack = current_thread_info() + 1;
+	stack = PTR_ALIGN(stack, L1_CACHE_BYTES);
+	stack += clusterid * STACK_SIZE + STACK_SIZE;
+	call_with_stack(bL_do_switch, (void *)_arg, stack);
+	BUG();
+}
+
+/*
+ * Generic switcher interface
+ */
+
+static unsigned int bL_gic_id[MAX_CPUS_PER_CLUSTER][MAX_NR_CLUSTERS];
+static int bL_switcher_cpu_pairing[NR_CPUS];
+
+/*
+ * bL_switch_to - Switch to a specific cluster for the current CPU
+ * @new_cluster_id: the ID of the cluster to switch to.
+ *
+ * This function must be called on the CPU to be switched.
+ * Returns 0 on success, else a negative status code.
+ */
+static int bL_switch_to(unsigned int new_cluster_id)
+{
+	unsigned int mpidr, this_cpu, that_cpu;
+	unsigned int ob_mpidr, ob_cpu, ob_cluster, ib_mpidr, ib_cpu, ib_cluster;
+	struct completion inbound_alive;
+	struct tick_device *tdev;
+	enum clock_event_mode tdev_mode;
+	long volatile *handshake_ptr;
+	int ipi_nr, ret;
+
+	this_cpu = smp_processor_id();
+	ob_mpidr = read_mpidr();
+	ob_cpu = MPIDR_AFFINITY_LEVEL(ob_mpidr, 0);
+	ob_cluster = MPIDR_AFFINITY_LEVEL(ob_mpidr, 1);
+	BUG_ON(cpu_logical_map(this_cpu) != ob_mpidr);
+
+	if (new_cluster_id == ob_cluster)
+		return 0;
+
+	that_cpu = bL_switcher_cpu_pairing[this_cpu];
+	ib_mpidr = cpu_logical_map(that_cpu);
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	pr_debug("before switch: CPU %d MPIDR %#x -> %#x\n",
+		 this_cpu, ob_mpidr, ib_mpidr);
+
+	this_cpu = smp_processor_id();
+
+	/* Close the gate for our entry vectors */
+	mcpm_set_entry_vector(ob_cpu, ob_cluster, NULL);
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, NULL);
+
+	/* Install our "inbound alive" notifier. */
+	init_completion(&inbound_alive);
+	ipi_nr = register_ipi_completion(&inbound_alive, this_cpu);
+	ipi_nr |= ((1 << 16) << bL_gic_id[ob_cpu][ob_cluster]);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, gic_get_sgir_physaddr(), ipi_nr);
+
+	/*
+	 * Let's wake up the inbound CPU now in case it requires some delay
+	 * to come online, but leave it gated in our entry vector code.
+	 */
+	ret = mcpm_cpu_power_up(ib_cpu, ib_cluster);
+	if (ret) {
+		pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Raise a SGI on the inbound CPU to make sure it doesn't stall
+	 * in a possible WFI, such as in bL_power_down().
+	 */
+	gic_send_sgi(bL_gic_id[ib_cpu][ib_cluster], 0);
+
+	/*
+	 * Wait for the inbound to come up.  This allows for other
+	 * tasks to be scheduled in the mean time.
+	 */
+	wait_for_completion(&inbound_alive);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, 0, 0);
+
+	/*
+	 * From this point we are entering the switch critical zone
+	 * and can't take any interrupts anymore.
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	trace_cpu_migrate_begin(get_ns(), ob_mpidr);
+
+	/* redirect GIC's SGIs to our counterpart */
+	gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]);
+
+	tdev = tick_get_device(this_cpu);
+	if (tdev && !cpumask_equal(tdev->evtdev->cpumask, cpumask_of(this_cpu)))
+		tdev = NULL;
+	if (tdev) {
+		tdev_mode = tdev->evtdev->mode;
+		clockevents_set_mode(tdev->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+	}
+
+	ret = cpu_pm_enter();
+
+	/* we can not tolerate errors at this point */
+	if (ret)
+		panic("%s: cpu_pm_enter() returned %d\n", __func__, ret);
+
+	/* Swap the physical CPUs in the logical map for this logical CPU. */
+	cpu_logical_map(this_cpu) = ib_mpidr;
+	cpu_logical_map(that_cpu) = ob_mpidr;
+
+	/* Let's do the actual CPU switch. */
+	ret = cpu_suspend((unsigned long)&handshake_ptr, bL_switchpoint);
+	if (ret > 0)
+		panic("%s: cpu_suspend() returned %d\n", __func__, ret);
+
+	/* We are executing on the inbound CPU at this point */
+	mpidr = read_mpidr();
+	pr_debug("after switch: CPU %d MPIDR %#x\n", this_cpu, mpidr);
+	BUG_ON(mpidr != ib_mpidr);
+
+	mcpm_cpu_powered_up();
+
+	ret = cpu_pm_exit();
+
+	if (tdev) {
+		clockevents_set_mode(tdev->evtdev, tdev_mode);
+		clockevents_program_event(tdev->evtdev,
+					  tdev->evtdev->next_event, 1);
+	}
+
+	trace_cpu_migrate_finish(get_ns(), ib_mpidr);
+	local_fiq_enable();
+	local_irq_enable();
+
+	*handshake_ptr = 1;
+	dsb_sev();
+
+	if (ret)
+		pr_err("%s exiting with error %d\n", __func__, ret);
+	return ret;
+}
+
+struct bL_thread {
+	spinlock_t lock;
+	struct task_struct *task;
+	wait_queue_head_t wq;
+	int wanted_cluster;
+	struct completion started;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+};
+
+static struct bL_thread bL_threads[NR_CPUS];
+
+static int bL_switcher_thread(void *arg)
+{
+	struct bL_thread *t = arg;
+	struct sched_param param = { .sched_priority = 1 };
+	int cluster;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+
+	sched_setscheduler_nocheck(current, SCHED_FIFO, &param);
+	complete(&t->started);
+
+	do {
+		if (signal_pending(current))
+			flush_signals(current);
+		wait_event_interruptible(t->wq,
+				t->wanted_cluster != -1 ||
+				kthread_should_stop());
+
+		spin_lock(&t->lock);
+		cluster = t->wanted_cluster;
+		completer = t->completer;
+		completer_cookie = t->completer_cookie;
+		t->wanted_cluster = -1;
+		t->completer = NULL;
+		spin_unlock(&t->lock);
+
+		if (cluster != -1) {
+			bL_switch_to(cluster);
+
+			if (completer)
+				completer(completer_cookie);
+		}
+	} while (!kthread_should_stop());
+
+	return 0;
+}
+
+static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
+{
+	struct task_struct *task;
+
+	task = kthread_create_on_node(bL_switcher_thread, arg,
+				      cpu_to_node(cpu), "kswitcher_%d", cpu);
+	if (!IS_ERR(task)) {
+		kthread_bind(task, cpu);
+		wake_up_process(task);
+	} else
+		pr_err("%s failed for CPU %d\n", __func__, cpu);
+	return task;
+}
+
+/*
+ * bL_switch_request_cb - Switch to a specific cluster for the given CPU,
+ *      with completion notification via a callback
+ *
+ * @cpu: the CPU to switch
+ * @new_cluster_id: the ID of the cluster to switch to.
+ * @completer: switch completion callback.  if non-NULL,
+ *	@completer(@completer_cookie) will be called on completion of
+ *	the switch, in non-atomic context.
+ * @completer_cookie: opaque context argument for @completer.
+ *
+ * This function causes a cluster switch on the given CPU by waking up
+ * the appropriate switcher thread.  This function may or may not return
+ * before the switch has occurred.
+ *
+ * If a @completer callback function is supplied, it will be called when
+ * the switch is complete.  This can be used to determine asynchronously
+ * when the switch is complete, regardless of when bL_switch_request()
+ * returns.  When @completer is supplied, no new switch request is permitted
+ * for the affected CPU until after the switch is complete, and @completer
+ * has returned.
+ */
+int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
+			 bL_switch_completion_handler completer,
+			 void *completer_cookie)
+{
+	struct bL_thread *t;
+
+	if (cpu >= ARRAY_SIZE(bL_threads)) {
+		pr_err("%s: cpu %d out of bounds\n", __func__, cpu);
+		return -EINVAL;
+	}
+
+	t = &bL_threads[cpu];
+
+	if (IS_ERR(t->task))
+		return PTR_ERR(t->task);
+	if (!t->task)
+		return -ESRCH;
+
+	spin_lock(&t->lock);
+	if (t->completer) {
+		spin_unlock(&t->lock);
+		return -EBUSY;
+	}
+	t->completer = completer;
+	t->completer_cookie = completer_cookie;
+	t->wanted_cluster = new_cluster_id;
+	spin_unlock(&t->lock);
+	wake_up(&t->wq);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bL_switch_request_cb);
+
+/*
+ * Activation and configuration code.
+ */
+
+static DEFINE_MUTEX(bL_switcher_activation_lock);
+static BLOCKING_NOTIFIER_HEAD(bL_activation_notifier);
+static unsigned int bL_switcher_active;
+static unsigned int bL_switcher_cpu_original_cluster[NR_CPUS];
+static cpumask_t bL_switcher_removed_logical_cpus;
+
+int bL_switcher_register_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_register_notifier);
+
+int bL_switcher_unregister_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_unregister_notifier);
+
+static int bL_activation_notify(unsigned long val)
+{
+	int ret;
+
+	ret = blocking_notifier_call_chain(&bL_activation_notifier, val, NULL);
+	if (ret & NOTIFY_STOP_MASK)
+		pr_err("%s: notifier chain failed with status 0x%x\n",
+			__func__, ret);
+	return notifier_to_errno(ret);
+}
+
+static void bL_switcher_restore_cpus(void)
+{
+	int i;
+
+	for_each_cpu(i, &bL_switcher_removed_logical_cpus)
+		cpu_up(i);
+}
+
+static int bL_switcher_halve_cpus(void)
+{
+	int i, j, cluster_0, gic_id, ret;
+	unsigned int cpu, cluster, mask;
+	cpumask_t available_cpus;
+
+	/* First pass to validate what we have */
+	mask = 0;
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster >= 2) {
+			pr_err("%s: only dual cluster systems are supported\n", __func__);
+			return -EINVAL;
+		}
+		if (WARN_ON(cpu >= MAX_CPUS_PER_CLUSTER))
+			return -EINVAL;
+		mask |= (1 << cluster);
+	}
+	if (mask != 3) {
+		pr_err("%s: no CPU pairing possible\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Now let's do the pairing.  We match each CPU with another CPU
+	 * from a different cluster.  To get a uniform scheduling behavior
+	 * without fiddling with CPU topology and compute capacity data,
+	 * we'll use logical CPUs initially belonging to the same cluster.
+	 */
+	memset(bL_switcher_cpu_pairing, -1, sizeof(bL_switcher_cpu_pairing));
+	cpumask_copy(&available_cpus, cpu_online_mask);
+	cluster_0 = -1;
+	for_each_cpu(i, &available_cpus) {
+		int match = -1;
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster_0 == -1)
+			cluster_0 = cluster;
+		if (cluster != cluster_0)
+			continue;
+		cpumask_clear_cpu(i, &available_cpus);
+		for_each_cpu(j, &available_cpus) {
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(j), 1);
+			/*
+			 * Let's remember the last match to create "odd"
+			 * pairings on purpose in order for other code not
+			 * to assume any relation between physical and
+			 * logical CPU numbers.
+			 */
+			if (cluster != cluster_0)
+				match = j;
+		}
+		if (match != -1) {
+			bL_switcher_cpu_pairing[i] = match;
+			cpumask_clear_cpu(match, &available_cpus);
+			pr_info("CPU%d paired with CPU%d\n", i, match);
+		}
+	}
+
+	/*
+	 * Now we disable the unwanted CPUs i.e. everything that has no
+	 * pairing information (that includes the pairing counterparts).
+	 */
+	cpumask_clear(&bL_switcher_removed_logical_cpus);
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+
+		/* Let's take note of the GIC ID for this CPU */
+		gic_id = gic_get_cpu_id(i);
+		if (gic_id < 0) {
+			pr_err("%s: bad GIC ID for CPU %d\n", __func__, i);
+			bL_switcher_restore_cpus();
+			return -EINVAL;
+		}
+		bL_gic_id[cpu][cluster] = gic_id;
+		pr_info("GIC ID for CPU %u cluster %u is %u\n",
+			cpu, cluster, gic_id);
+
+		if (bL_switcher_cpu_pairing[i] != -1) {
+			bL_switcher_cpu_original_cluster[i] = cluster;
+			continue;
+		}
+
+		ret = cpu_down(i);
+		if (ret) {
+			bL_switcher_restore_cpus();
+			return ret;
+		}
+		cpumask_set_cpu(i, &bL_switcher_removed_logical_cpus);
+	}
+
+	return 0;
+}
+
+/* Determine the logical CPU a given physical CPU is grouped on. */
+int bL_switcher_get_logical_index(u32 mpidr)
+{
+	int cpu;
+
+	if (!bL_switcher_active)
+		return -EUNATCH;
+
+	mpidr &= MPIDR_HWID_BITMASK;
+	for_each_online_cpu(cpu) {
+		int pairing = bL_switcher_cpu_pairing[cpu];
+		if (pairing == -1)
+			continue;
+		if ((mpidr == cpu_logical_map(cpu)) ||
+		    (mpidr == cpu_logical_map(pairing)))
+			return cpu;
+	}
+	return -EINVAL;
+}
+
+static void bL_switcher_trace_trigger_cpu(void *__always_unused info)
+{
+	trace_cpu_migrate_current(get_ns(), read_mpidr());
+}
+
+int bL_switcher_trace_trigger(void)
+{
+	int ret;
+
+	preempt_disable();
+
+	bL_switcher_trace_trigger_cpu(NULL);
+	ret = smp_call_function(bL_switcher_trace_trigger_cpu, NULL, true);
+
+	preempt_enable();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_trace_trigger);
+
+static int bL_switcher_enable(void)
+{
+	int cpu, ret;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+	if (bL_switcher_active) {
+		unlock_device_hotplug();
+		mutex_unlock(&bL_switcher_activation_lock);
+		return 0;
+	}
+
+	pr_info("big.LITTLE switcher initializing\n");
+
+	ret = bL_activation_notify(BL_NOTIFY_PRE_ENABLE);
+	if (ret)
+		goto error;
+
+	ret = bL_switcher_halve_cpus();
+	if (ret)
+		goto error;
+
+	bL_switcher_trace_trigger();
+
+	for_each_online_cpu(cpu) {
+		struct bL_thread *t = &bL_threads[cpu];
+		spin_lock_init(&t->lock);
+		init_waitqueue_head(&t->wq);
+		init_completion(&t->started);
+		t->wanted_cluster = -1;
+		t->task = bL_switcher_thread_create(cpu, t);
+	}
+
+	bL_switcher_active = 1;
+	bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+	pr_info("big.LITTLE switcher initialized\n");
+	goto out;
+
+error:
+	pr_warn("big.LITTLE switcher initialization failed\n");
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+	return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+static void bL_switcher_disable(void)
+{
+	unsigned int cpu, cluster;
+	struct bL_thread *t;
+	struct task_struct *task;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+
+	if (!bL_switcher_active)
+		goto out;
+
+	if (bL_activation_notify(BL_NOTIFY_PRE_DISABLE) != 0) {
+		bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+		goto out;
+	}
+
+	bL_switcher_active = 0;
+
+	/*
+	 * To deactivate the switcher, we must shut down the switcher
+	 * threads to prevent any other requests from being accepted.
+	 * Then, if the final cluster for given logical CPU is not the
+	 * same as the original one, we'll recreate a switcher thread
+	 * just for the purpose of switching the CPU back without any
+	 * possibility for interference from external requests.
+	 */
+	for_each_online_cpu(cpu) {
+		t = &bL_threads[cpu];
+		task = t->task;
+		t->task = NULL;
+		if (!task || IS_ERR(task))
+			continue;
+		kthread_stop(task);
+		/* no more switch may happen on this CPU at this point */
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+		if (cluster == bL_switcher_cpu_original_cluster[cpu])
+			continue;
+		init_completion(&t->started);
+		t->wanted_cluster = bL_switcher_cpu_original_cluster[cpu];
+		task = bL_switcher_thread_create(cpu, t);
+		if (!IS_ERR(task)) {
+			wait_for_completion(&t->started);
+			kthread_stop(task);
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+			if (cluster == bL_switcher_cpu_original_cluster[cpu])
+				continue;
+		}
+		/* If execution gets here, we're in trouble. */
+		pr_crit("%s: unable to restore original cluster for CPU %d\n",
+			__func__, cpu);
+		pr_crit("%s: CPU %d can't be restored\n",
+			__func__, bL_switcher_cpu_pairing[cpu]);
+		cpumask_clear_cpu(bL_switcher_cpu_pairing[cpu],
+				  &bL_switcher_removed_logical_cpus);
+	}
+
+	bL_switcher_restore_cpus();
+	bL_switcher_trace_trigger();
+
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+
+static ssize_t bL_switcher_active_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", bL_switcher_active);
+}
+
+static ssize_t bL_switcher_active_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret;
+
+	switch (buf[0]) {
+	case '0':
+		bL_switcher_disable();
+		ret = 0;
+		break;
+	case '1':
+		ret = bL_switcher_enable();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return (ret >= 0) ? count : ret;
+}
+
+static ssize_t bL_switcher_trace_trigger_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret = bL_switcher_trace_trigger();
+
+	return ret ? ret : count;
+}
+
+static struct kobj_attribute bL_switcher_active_attr =
+	__ATTR(active, 0644, bL_switcher_active_show, bL_switcher_active_store);
+
+static struct kobj_attribute bL_switcher_trace_trigger_attr =
+	__ATTR(trace_trigger, 0200, NULL, bL_switcher_trace_trigger_store);
+
+static struct attribute *bL_switcher_attrs[] = {
+	&bL_switcher_active_attr.attr,
+	&bL_switcher_trace_trigger_attr.attr,
+	NULL,
+};
+
+static struct attribute_group bL_switcher_attr_group = {
+	.attrs = bL_switcher_attrs,
+};
+
+static struct kobject *bL_switcher_kobj;
+
+static int __init bL_switcher_sysfs_init(void)
+{
+	int ret;
+
+	bL_switcher_kobj = kobject_create_and_add("bL_switcher", kernel_kobj);
+	if (!bL_switcher_kobj)
+		return -ENOMEM;
+	ret = sysfs_create_group(bL_switcher_kobj, &bL_switcher_attr_group);
+	if (ret)
+		kobject_put(bL_switcher_kobj);
+	return ret;
+}
+
+#endif  /* CONFIG_SYSFS */
+
+bool bL_switcher_get_enabled(void)
+{
+	mutex_lock(&bL_switcher_activation_lock);
+
+	return bL_switcher_active;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_get_enabled);
+
+void bL_switcher_put_enabled(void)
+{
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_put_enabled);
+
+/*
+ * Veto any CPU hotplug operation on those CPUs we've removed
+ * while the switcher is active.
+ * We're just not ready to deal with that given the trickery involved.
+ */
+static int bL_switcher_hotplug_callback(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	if (bL_switcher_active) {
+		int pairing = bL_switcher_cpu_pairing[(unsigned long)hcpu];
+		switch (action & 0xf) {
+		case CPU_UP_PREPARE:
+		case CPU_DOWN_PREPARE:
+			if (pairing == -1)
+				return NOTIFY_BAD;
+		}
+	}
+	return NOTIFY_DONE;
+}
+
+static bool no_bL_switcher;
+core_param(no_bL_switcher, no_bL_switcher, bool, 0644);
+
+static int __init bL_switcher_init(void)
+{
+	int ret;
+
+	if (MAX_NR_CLUSTERS != 2) {
+		pr_err("%s: only dual cluster systems are supported\n", __func__);
+		return -EINVAL;
+	}
+
+	cpu_notifier(bL_switcher_hotplug_callback, 0);
+
+	if (!no_bL_switcher) {
+		ret = bL_switcher_enable();
+		if (ret)
+			return ret;
+	}
+
+#ifdef CONFIG_SYSFS
+	ret = bL_switcher_sysfs_init();
+	if (ret)
+		pr_err("%s: unable to create sysfs entry\n", __func__);
+#endif
+
+	return 0;
+}
+
+late_initcall(bL_switcher_init);
diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c
new file mode 100644
index 000000000000..3f47f1203c6b
--- /dev/null
+++ b/arch/arm/common/bL_switcher_dummy_if.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/common/bL_switcher_dummy_if.c -- b.L switcher dummy interface
+ *
+ * Created by:	Nicolas Pitre, November 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Dummy interface to user space for debugging purpose only.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <asm/uaccess.h>
+#include <asm/bL_switcher.h>
+
+static ssize_t bL_switcher_write(struct file *file, const char __user *buf,
+			size_t len, loff_t *pos)
+{
+	unsigned char val[3];
+	unsigned int cpu, cluster;
+	int ret;
+
+	pr_debug("%s\n", __func__);
+
+	if (len < 3)
+		return -EINVAL;
+
+	if (copy_from_user(val, buf, 3))
+		return -EFAULT;
+
+	/* format: <cpu#>,<cluster#> */
+	if (val[0] < '0' || val[0] > '9' ||
+	    val[1] != ',' ||
+	    val[2] < '0' || val[2] > '1')
+		return -EINVAL;
+
+	cpu = val[0] - '0';
+	cluster = val[2] - '0';
+	ret = bL_switch_request(cpu, cluster);
+
+	return ret ? : len;
+}
+
+static const struct file_operations bL_switcher_fops = {
+	.write		= bL_switcher_write,
+	.owner	= THIS_MODULE,
+};
+
+static struct miscdevice bL_switcher_device = {
+	MISC_DYNAMIC_MINOR,
+	"b.L_switcher",
+	&bL_switcher_fops
+};
+
+static int __init bL_switcher_dummy_if_init(void)
+{
+	return misc_register(&bL_switcher_device);
+}
+
+static void __exit bL_switcher_dummy_if_exit(void)
+{
+	misc_deregister(&bL_switcher_device);
+}
+
+module_init(bL_switcher_dummy_if_init);
+module_exit(bL_switcher_dummy_if_exit);
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 39ad030ac0c7..8e1a0245907f 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
+
 /*****************************************************************************/
 
 static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 static int prepare_unused_channel_list(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
+	int i, count, ctlr;
+	struct of_phandle_args  dma_spec;
+
+	if (dev->of_node) {
+		count = of_property_count_strings(dev->of_node, "dma-names");
+		if (count < 0)
+			return 0;
+		for (i = 0; i < count; i++) {
+			if (of_parse_phandle_with_args(dev->of_node, "dmas",
+						       "#dma-cells", i,
+						       &dma_spec))
+				continue;
+
+			if (!of_match_node(edma_of_ids, dma_spec.np)) {
+				of_node_put(dma_spec.np);
+				continue;
+			}
 
+			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+				  edma_cc[0]->edma_unused);
+			of_node_put(dma_spec.np);
+		}
+		return 0;
+	}
+
+	/* For non-OF case */
 	for (i = 0; i < pdev->num_resources; i++) {
 		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
+				  edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -1235,6 +1264,23 @@ void edma_resume(unsigned channel)
 }
 EXPORT_SYMBOL(edma_resume);
 
+int edma_trigger_channel(unsigned channel)
+{
+	unsigned ctlr;
+	unsigned int mask;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+	mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
+
+	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
+		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
+	return 0;
+}
+EXPORT_SYMBOL(edma_trigger_channel);
+
 /**
  * edma_start - start dma on a channel
  * @channel: channel being activated
@@ -1745,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 370236dd1a03..26020a03f659 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -27,6 +27,18 @@ void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
 	sync_cache_w(&mcpm_entry_vectors[cluster][cpu]);
 }
 
+extern unsigned long mcpm_entry_early_pokes[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER][2];
+
+void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
+			 unsigned long poke_phys_addr, unsigned long poke_val)
+{
+	unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
+	poke[0] = poke_phys_addr;
+	poke[1] = poke_val;
+	__cpuc_flush_dcache_area((void *)poke, 8);
+	outer_clean_range(__pa(poke), __pa(poke + 2));
+}
+
 static const struct mcpm_platform_ops *platform_ops;
 
 int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
@@ -51,7 +63,8 @@ void mcpm_cpu_power_down(void)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/*
@@ -89,11 +102,27 @@ void mcpm_cpu_power_down(void)
 	BUG();
 }
 
+int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	int ret;
+
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish))
+		return -EUNATCH;
+
+	ret = platform_ops->power_down_finish(cpu, cluster);
+	if (ret)
+		pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
+			__func__, cpu, cluster, ret);
+
+	return ret;
+}
+
 void mcpm_cpu_suspend(u64 expected_residency)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/* Very similar to mcpm_cpu_power_down() */
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index 39c96df3477a..e02db4b81a66 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -15,6 +15,7 @@
 
 #include <linux/linkage.h>
 #include <asm/mcpm.h>
+#include <asm/assembler.h>
 
 #include "vlock.h"
 
@@ -47,6 +48,7 @@
 
 ENTRY(mcpm_entry_point)
 
+ ARM_BE8(setend        be)
  THUMB(	adr	r12, BSYM(1f)	)
  THUMB(	bx	r12		)
  THUMB(	.thumb			)
@@ -71,12 +73,19 @@ ENTRY(mcpm_entry_point)
 	 * position independent way.
 	 */
 	adr	r5, 3f
-	ldmia	r5, {r6, r7, r8, r11}
+	ldmia	r5, {r0, r6, r7, r8, r11}
+	add	r0, r5, r0			@ r0 = mcpm_entry_early_pokes
 	add	r6, r5, r6			@ r6 = mcpm_entry_vectors
 	ldr	r7, [r5, r7]			@ r7 = mcpm_power_up_setup_phys
 	add	r8, r5, r8			@ r8 = mcpm_sync
 	add	r11, r5, r11			@ r11 = first_man_locks
 
+	@ Perform an early poke, if any
+	add	r0, r0, r4, lsl #3
+	ldmia	r0, {r0, r1}
+	teq	r0, #0
+	strne	r1, [r0]
+
 	mov	r0, #MCPM_SYNC_CLUSTER_SIZE
 	mla	r8, r0, r10, r8			@ r8 = sync cluster base
 
@@ -195,7 +204,8 @@ mcpm_entry_gated:
 
 	.align	2
 
-3:	.word	mcpm_entry_vectors - .
+3:	.word	mcpm_entry_early_pokes - .
+	.word	mcpm_entry_vectors - 3b
 	.word	mcpm_power_up_setup_phys - 3b
 	.word	mcpm_sync - 3b
 	.word	first_man_locks - 3b
@@ -214,6 +224,10 @@ first_man_locks:
 ENTRY(mcpm_entry_vectors)
 	.space	4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
 
+	.type	mcpm_entry_early_pokes, #object
+ENTRY(mcpm_entry_early_pokes)
+	.space	8 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
+
 	.type	mcpm_power_up_setup_phys, #object
 ENTRY(mcpm_power_up_setup_phys)
 	.space  4		@ set by mcpm_sync_init()
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 1bc34c7567fd..177251a4dd9a 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -19,14 +19,23 @@
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 
+static void cpu_to_pcpu(unsigned int cpu,
+			unsigned int *pcpu, unsigned int *pcluster)
+{
+	unsigned int mpidr;
+
+	mpidr = cpu_logical_map(cpu);
+	*pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	*pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+}
+
 static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned int mpidr, pcpu, pcluster, ret;
+	unsigned int pcpu, pcluster, ret;
 	extern void secondary_startup(void);
 
-	mpidr = cpu_logical_map(cpu);
-	pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-	pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
 	pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n",
 		 __func__, cpu, pcpu, pcluster);
 
@@ -47,6 +56,15 @@ static void mcpm_secondary_init(unsigned int cpu)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
+static int mcpm_cpu_kill(unsigned int cpu)
+{
+	unsigned int pcpu, pcluster;
+
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
+	return !mcpm_cpu_power_down_finish(pcpu, pcluster);
+}
+
 static int mcpm_cpu_disable(unsigned int cpu)
 {
 	/*
@@ -73,6 +91,7 @@ static struct smp_operations __initdata mcpm_smp_ops = {
 	.smp_boot_secondary	= mcpm_boot_secondary,
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= mcpm_cpu_kill,
 	.cpu_disable		= mcpm_cpu_disable,
 	.cpu_die		= mcpm_cpu_die,
 #endif
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index d56c932580eb..025f6ce38596 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
 
 /*
  * Certain hardware parameters determined at the time of device manufacture,
@@ -25,8 +26,10 @@
  */
 #ifdef CONFIG_ARCH_SA1100
 #define PARAM_BASE	0xe8ffc000
+#define param_start(x)	(void *)(x)
 #else
 #define PARAM_BASE	0xa0000a00
+#define param_start(x)	__va(x)
 #endif
 #define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 )  | ( b << 8 ) | a )
 
@@ -41,7 +44,7 @@ EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
-	memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
+	memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
 
 	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
 		sharpsl_param.comadj=-1;
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 023ee63827a2..ce922d0ea7aa 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -166,7 +166,8 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+		CLOCK_EVT_FEAT_DYNIRQ,
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
@@ -174,7 +175,7 @@ static struct clock_event_device sp804_clockevent = {
 
 static struct irqaction sp804_timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= sp804_timer_interrupt,
 	.dev_id		= &sp804_clockevent,
 };
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
deleted file mode 100644
index 6cb362e56d29..000000000000
--- a/arch/arm/common/via82c505.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS		7
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 *value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		*value=inb(0xCFC + (where&3));
-		break;
-	case 2:
-		*value=inw(0xCFC + (where&2));
-		break;
-	case 4:
-		*value=inl(0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		       int size, u32 value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		outb(value, 0xCFC + (where&3));
-		break;
-	case 2:
-		outw(value, 0xCFC + (where&2));
-		break;
-	case 4:
-		outl(value, 0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
-	.read	= via82c505_read_config,
-	.write	= via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: VIA 82c505\n");
-	if (!request_region(0xA8,2,"via config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
-		return;
-	}
-	if (!request_region(0xCF8,8,"pci config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
-		release_region(0xA8, 2);
-		return;
-	}
-
-	/* Enable compatible Mode */
-	outb(0x96,0xA8);
-	outb(0x18,0xA9);
-	outb(0x93,0xA8);
-	outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}
diff --git a/arch/arm/configs/ag5evm_defconfig b/arch/arm/configs/ag5evm_defconfig
deleted file mode 100644
index 212ead354a6b..000000000000
--- a/arch/arm/configs/ag5evm_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_AG5EVM=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
index dab5a7dfadc6..1ce39940795d 100644
--- a/arch/arm/configs/ape6evm_defconfig
+++ b/arch/arm/configs/ape6evm_defconfig
@@ -54,7 +54,8 @@ CONFIG_NETDEVICES=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_NONSTANDARD=y
@@ -71,6 +72,9 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 75fd842d4071..690e89273230 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -14,11 +14,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91RM9200_DT=y
 CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -62,6 +64,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_UBI=y
@@ -78,7 +81,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 65edf6d47215..287ac1d7aac7 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -25,10 +24,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_743622=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -42,6 +40,17 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_SYN_COOKIES=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PROC_DEVICETREE=y
@@ -83,7 +92,6 @@ CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_TEST=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -105,14 +113,13 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index e7e94948d194..b38cd107f82d 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -91,6 +91,10 @@ CONFIG_VIDEO_RCAR_VIN=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_HSPI=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 4364eff5b01e..110105476848 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -13,6 +13,9 @@ CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -78,6 +81,7 @@ CONFIG_SPI_ORION=y
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 806005a4c4c1..6ac5ea73bd0a 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,15 +1,14 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_EP93XX=y
 CONFIG_CRUNCH=y
@@ -47,11 +46,8 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -67,15 +63,14 @@ CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_EP93XX_ETH=y
 CONFIG_USB_RTL8150=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -86,9 +81,9 @@ CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
@@ -100,24 +95,18 @@ CONFIG_RTC_DRV_EP93XX=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
deleted file mode 100644
index bffe68e190a3..000000000000
--- a/arch/arm/configs/exynos4_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_ARMLEX4210=y
-CONFIG_MACH_UNIVERSAL_C210=y
-CONFIG_MACH_NURI=y
-CONFIG_MACH_ORIGEN=y
-CONFIG_MACH_SMDK4412=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 317960f12488..0142ec37e0be 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,5 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
@@ -11,11 +12,11 @@ CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_H3600=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_SA1100=y
+CONFIG_PREEMPT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -24,13 +25,10 @@ CONFIG_IRDA=m
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -41,19 +39,15 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
+# CONFIG_WLAN is not set
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -64,8 +58,6 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=m
@@ -74,6 +66,4 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=m
 CONFIG_NFS_FS=y
 CONFIG_NFSD=m
-CONFIG_SMB_FS=m
 CONFIG_NLS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f07a847b00c9..e958ebe79779 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -17,16 +16,18 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX25_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX25SD=y
+CONFIG_MACH_IMX25_DT=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -39,8 +40,6 @@ CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
 CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MACH_IMX27_DT=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -67,7 +66,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -123,24 +121,20 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX2=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
+CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -157,7 +151,6 @@ CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -198,3 +191,5 @@ CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 06686e7303a9..8d0c5a018ed7 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
@@ -17,10 +16,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_MACH_IMX31_DT=y
+CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
@@ -30,6 +27,7 @@ CONFIG_MACH_MX31MOBOARD=y
 CONFIG_MACH_QONG=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_IMX31_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
@@ -39,7 +37,6 @@ CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_VF610=y
-CONFIG_MXC_PWM=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -64,20 +61,24 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_NETFILTER=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
+CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
@@ -88,6 +89,7 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
@@ -98,10 +100,11 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -115,7 +118,7 @@ CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
+CONFIG_BRCMFMAC=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
@@ -124,22 +127,22 @@ CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_MXC_RNGA=y
-CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
@@ -155,30 +158,26 @@ CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_MX3=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_DRM=y
-CONFIG_VIDEO_MX3=y
-CONFIG_FB=y
-CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -188,21 +187,33 @@ CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
-CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_MC13XXX=y
@@ -213,9 +224,10 @@ CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_FB_HELPER=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
 CONFIG_COMMON_CLK_DEBUG=y
@@ -244,7 +256,6 @@ CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
@@ -259,6 +270,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
@@ -269,3 +281,6 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index a8314c3ee84d..5bae19557591 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,15 +1,17 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_ARCH_INTEGRATOR_CP=y
+CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_ARM922T=y
@@ -18,12 +20,9 @@ CONFIG_CPU_ARM1020=y
 CONFIG_CPU_ARM1022=y
 CONFIG_CPU_ARM1026=y
 CONFIG_PCI=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
+# CONFIG_ATAGS is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
@@ -44,24 +43,20 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_E100=y
 CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_ARMCLCD=y
@@ -71,19 +66,23 @@ CONFIG_FB_MATROX_MYSTIQUE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL030=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 1f36b823905f..9943e5da74f1 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -123,7 +123,9 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
+CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0f2aa61911a3..0ae0eaebf6b2 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -10,49 +10,18 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_D2NET_V2=y
-CONFIG_MACH_DB88F6281_BP=y
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_INETSPACE_V2=y
-CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
-CONFIG_MACH_NETSPACE_MAX_V2=y
-CONFIG_MACH_NETSPACE_V2=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
-CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_T5325=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_CLOUDBOX_DT=y
-CONFIG_MACH_DB88F628X_BP_DT=y
-CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
-CONFIG_MACH_LSXL_DT=y
-CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
-CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
-CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_SHEEVAPLUG_DT=y
-CONFIG_MACH_TOPKICK_DT=y
-CONFIG_MACH_TS219_DT=y
+CONFIG_ARCH_KIRKWOOD_DT=y
+CONFIG_MACH_MV88F6281GTW_GE_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
@@ -92,6 +61,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -100,9 +70,9 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
@@ -123,9 +93,11 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
-CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y
@@ -164,6 +136,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
@@ -171,6 +145,7 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -186,12 +161,12 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
new file mode 100644
index 000000000000..825c16dee8a0
--- /dev/null
+++ b/arch/arm/configs/koelsch_defconfig
@@ -0,0 +1,54 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/lager_defconfig
index 57ad3d47de70..35bff5e0d57a 100644
--- a/arch/arm/configs/kota2_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -1,52 +1,38 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KOTA2=y
-CONFIG_MEMORY_SIZE=0x1e000000
+CONFIG_ARCH_R8A7790=y
+CONFIG_MACH_LAGER=y
 # CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
 CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_742230=y
-CONFIG_ARM_ERRATA_742231=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
 CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
 CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
@@ -61,47 +47,50 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_MAC80211=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
 # CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_B43=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_DEBUG=y
-CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_NR_UARTS=10
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SH_PFC=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
-CONFIG_BCMA=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
@@ -109,13 +98,25 @@ CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_RENESAS_TPU=y
-CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+# CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index c50e52be4463..5cc6360340b1 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -29,6 +29,7 @@ CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
@@ -91,6 +92,8 @@ CONFIG_SOC_CAMERA=y
 CONFIG_VIDEO_RCAR_VIN=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6e572c64cf5a..4a5903e04827 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_KEYSTONE=y
@@ -36,6 +37,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_TEGRA_PCI=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_ARCH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
@@ -46,6 +48,7 @@ CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
 CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -133,6 +136,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_OMAP=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 731814e2c189..594d706b641f 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -39,6 +39,8 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MWIFIEX=y
 CONFIG_MWIFIEX_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_I2C=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 1d6d8fb7f4a1..6150108e15de 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -27,7 +26,6 @@ CONFIG_ARCH_MXS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_AUTO_ZRELADDR=y
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,8 +41,6 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -52,7 +48,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
@@ -67,12 +62,12 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_ENC28J60=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
 CONFIG_SMSC_PHY=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -81,7 +76,6 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -96,7 +90,6 @@ CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -110,7 +103,6 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -119,11 +111,14 @@ CONFIG_SND_MXS_SOC=y
 CONFIG_SND_SOC_MXS_SGTL5000=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_PHY=y
 CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
@@ -143,9 +138,9 @@ CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_MXS_LRADC=y
-CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_IIO=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
 CONFIG_EXT2_FS=y
@@ -173,14 +168,14 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_INFO=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
@@ -188,3 +183,4 @@ CONFIG_DEBUG_USER=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
+CONFIG_FONTS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 056b27aafbe6..98a50c309b90 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,14 +1,13 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -20,22 +19,21 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_LEDS=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -61,8 +59,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
@@ -77,14 +73,13 @@ CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
-CONFIG_CONNECTOR=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=y
 CONFIG_MTD_CFI=y
@@ -98,32 +93,40 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_BMP085_I2C=m
+CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_MD=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
 CONFIG_KS8851=y
 CONFIG_KS8851_MLL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_TI_CPSW=y
+CONFIG_AT803X_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
@@ -133,7 +136,6 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -143,8 +145,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -158,31 +159,31 @@ CONFIG_GPIO_TWL4030=y
 CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
 CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
+CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
-CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
 CONFIG_OMAP2_DSS=m
-CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
@@ -194,12 +195,8 @@ CONFIG_DISPLAY_PANEL_DPI=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -216,14 +213,14 @@ CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
-CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -232,7 +229,6 @@ CONFIG_USB_ZERO=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
-CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
@@ -252,11 +248,8 @@ CONFIG_RTC_DRV_OMAP=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_THERMAL=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_THERMAL=y
-CONFIG_DRA752_THERMAL=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_PALMAS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
@@ -275,23 +268,18 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
@@ -300,8 +288,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_SOC_OMAP5=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DAVINCI_CPDMA=y
-CONFIG_TI_CPSW=y
-CONFIG_AT803X_PHY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
deleted file mode 100644
index e319b2c56f11..000000000000
--- a/arch/arm/configs/shark_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
new file mode 100644
index 000000000000..d57a85badb5e
--- /dev/null
+++ b/arch/arm/configs/sunxi_defconfig
@@ -0,0 +1,61 @@
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SMP=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NLS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 92d0a149aeb5..4934295bb4f0 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,3 +1,4 @@
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -26,8 +27,12 @@ CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_TEGRA_PCI=y
+CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -37,9 +42,11 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
+CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -92,6 +99,7 @@ CONFIG_ISL29003=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
@@ -106,6 +114,7 @@ CONFIG_RT2800USB=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
+CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 # CONFIG_LEGACY_PTYS is not set
@@ -123,6 +132,7 @@ CONFIG_SPI=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -178,6 +188,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
 CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_ACM=y
@@ -216,6 +227,7 @@ CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index a0025dc13021..ac632cc38f24 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,4 +1,3 @@
-CONFIG_HIGHMEM=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -16,6 +15,9 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -68,8 +70,8 @@ CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
-CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -78,10 +80,8 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_UX500=y
-CONFIG_USB_PHY=y
 CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -116,12 +116,12 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_DEV_UX500=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index f2de51f0bd18..f489fdaa19b8 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
@@ -8,11 +7,9 @@ CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
@@ -23,14 +20,22 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VEXPRESS_DCSCB=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
 # CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
-CONFIG_HOTPLUG_CPU=y
+CONFIG_NR_CPUS=8
+CONFIG_ARM_PSCI=y
 CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+CONFIG_CMDLINE="console=ttyAMA0"
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -44,37 +49,46 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_VIRTIO_NET=y
+CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SENSORS_VEXPRESS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -103,38 +117,45 @@ CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore
new file mode 100644
index 000000000000..6231d36b3635
--- /dev/null
+++ b/arch/arm/crypto/.gitignore
@@ -0,0 +1 @@
+aesbs-core.S
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index a2c83851bc90..81cda39860c5 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -3,7 +3,17 @@
 #
 
 obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
+obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 
-aes-arm-y  := aes-armv4.o aes_glue.o
-sha1-arm-y := sha1-armv4-large.o sha1_glue.o
+aes-arm-y	:= aes-armv4.o aes_glue.o
+aes-arm-bs-y	:= aesbs-core.o aesbs-glue.o
+sha1-arm-y	:= sha1-armv4-large.o sha1_glue.o
+
+quiet_cmd_perl = PERL    $@
+      cmd_perl = $(PERL) $(<) > $(@)
+
+$(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl
+	$(call cmd,perl)
+
+.PRECIOUS: $(obj)/aesbs-core.S
diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S
index 19d6cd6f29f9..3a14ea8fe97e 100644
--- a/arch/arm/crypto/aes-armv4.S
+++ b/arch/arm/crypto/aes-armv4.S
@@ -148,7 +148,7 @@ AES_Te:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_encrypt)
-	sub	r3,pc,#8		@ AES_encrypt
+	adr	r3,AES_encrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
@@ -381,7 +381,7 @@ _armv4_AES_encrypt:
 .align	5
 ENTRY(private_AES_set_encrypt_key)
 _armv4_AES_set_encrypt_key:
-	sub	r3,pc,#8		@ AES_set_encrypt_key
+	adr	r3,_armv4_AES_set_encrypt_key
 	teq	r0,#0
 	moveq	r0,#-1
 	beq	.Labrt
@@ -843,7 +843,7 @@ AES_Td:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_decrypt)
-	sub	r3,pc,#8		@ AES_decrypt
+	adr	r3,AES_decrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c
index 59f7877ead6a..3003fa1f6fb4 100644
--- a/arch/arm/crypto/aes_glue.c
+++ b/arch/arm/crypto/aes_glue.c
@@ -6,22 +6,12 @@
 #include <linux/crypto.h>
 #include <crypto/aes.h>
 
-#define AES_MAXNR 14
+#include "aes_glue.h"
 
-typedef struct {
-	unsigned int rd_key[4 *(AES_MAXNR + 1)];
-	int rounds;
-} AES_KEY;
-
-struct AES_CTX {
-	AES_KEY enc_key;
-	AES_KEY dec_key;
-};
-
-asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx);
-asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx);
-asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
-asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+EXPORT_SYMBOL(AES_encrypt);
+EXPORT_SYMBOL(AES_decrypt);
+EXPORT_SYMBOL(private_AES_set_encrypt_key);
+EXPORT_SYMBOL(private_AES_set_decrypt_key);
 
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
@@ -81,7 +71,7 @@ static struct crypto_alg aes_alg = {
 		.cipher	= {
 			.cia_min_keysize	= AES_MIN_KEY_SIZE,
 			.cia_max_keysize	= AES_MAX_KEY_SIZE,
-			.cia_setkey			= aes_set_key,
+			.cia_setkey		= aes_set_key,
 			.cia_encrypt		= aes_encrypt,
 			.cia_decrypt		= aes_decrypt
 		}
diff --git a/arch/arm/crypto/aes_glue.h b/arch/arm/crypto/aes_glue.h
new file mode 100644
index 000000000000..cca3e51eb606
--- /dev/null
+++ b/arch/arm/crypto/aes_glue.h
@@ -0,0 +1,19 @@
+
+#define AES_MAXNR 14
+
+struct AES_KEY {
+	unsigned int rd_key[4 * (AES_MAXNR + 1)];
+	int rounds;
+};
+
+struct AES_CTX {
+	struct AES_KEY enc_key;
+	struct AES_KEY dec_key;
+};
+
+asmlinkage void AES_encrypt(const u8 *in, u8 *out, struct AES_KEY *ctx);
+asmlinkage void AES_decrypt(const u8 *in, u8 *out, struct AES_KEY *ctx);
+asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey,
+					   const int bits, struct AES_KEY *key);
+asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey,
+					   const int bits, struct AES_KEY *key);
diff --git a/arch/arm/crypto/aesbs-core.S_shipped b/arch/arm/crypto/aesbs-core.S_shipped
new file mode 100644
index 000000000000..64205d453260
--- /dev/null
+++ b/arch/arm/crypto/aesbs-core.S_shipped
@@ -0,0 +1,2544 @@
+
+@ ====================================================================
+@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@
+@ Specific modes and adaptation for Linux kernel by Ard Biesheuvel
+@ <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is
+@ granted.
+@ ====================================================================
+
+@ Bit-sliced AES for ARM NEON
+@
+@ February 2012.
+@
+@ This implementation is direct adaptation of bsaes-x86_64 module for
+@ ARM NEON. Except that this module is endian-neutral [in sense that
+@ it can be compiled for either endianness] by courtesy of vld1.8's
+@ neutrality. Initial version doesn't implement interface to OpenSSL,
+@ only low-level primitives and unsupported entry points, just enough
+@ to collect performance results, which for Cortex-A8 core are:
+@
+@ encrypt	19.5 cycles per byte processed with 128-bit key
+@ decrypt	22.1 cycles per byte processed with 128-bit key
+@ key conv.	440  cycles per 128-bit key/0.18 of 8x block
+@
+@ Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7,
+@ which is [much] worse than anticipated (for further details see
+@ http://www.openssl.org/~appro/Snapdragon-S4.html).
+@
+@ Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code
+@ manages in 20.0 cycles].
+@
+@ When comparing to x86_64 results keep in mind that NEON unit is
+@ [mostly] single-issue and thus can't [fully] benefit from
+@ instruction-level parallelism. And when comparing to aes-armv4
+@ results keep in mind key schedule conversion overhead (see
+@ bsaes-x86_64.pl for further details)...
+@
+@						<appro@openssl.org>
+
+@ April-August 2013
+@
+@ Add CBC, CTR and XTS subroutines, adapt for kernel use.
+@
+@					<ard.biesheuvel@linaro.org>
+
+#ifndef __KERNEL__
+# include "arm_arch.h"
+
+# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
+# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
+# define VFP_ABI_FRAME	0x40
+#else
+# define VFP_ABI_PUSH
+# define VFP_ABI_POP
+# define VFP_ABI_FRAME	0
+# define BSAES_ASM_EXTENDED_KEY
+# define XTS_CHAIN_TWEAK
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+#endif
+
+#ifdef __thumb__
+# define adrl adr
+#endif
+
+#if __ARM_ARCH__>=7
+.text
+.syntax	unified 	@ ARMv7-capable assembler is expected to handle this
+#ifdef __thumb2__
+.thumb
+#else
+.code   32
+#endif
+
+.fpu	neon
+
+.type	_bsaes_decrypt8,%function
+.align	4
+_bsaes_decrypt8:
+	adr	r6,_bsaes_decrypt8
+	vldmia	r4!, {q9}		@ round 0 key
+	add	r6,r6,#.LM0ISR-_bsaes_decrypt8
+
+	vldmia	r6!, {q8}		@ .LM0ISR
+	veor	q10, q0, q9	@ xor with round0 key
+	veor	q11, q1, q9
+	 vtbl.8	d0, {q10}, d16
+	 vtbl.8	d1, {q10}, d17
+	veor	q12, q2, q9
+	 vtbl.8	d2, {q11}, d16
+	 vtbl.8	d3, {q11}, d17
+	veor	q13, q3, q9
+	 vtbl.8	d4, {q12}, d16
+	 vtbl.8	d5, {q12}, d17
+	veor	q14, q4, q9
+	 vtbl.8	d6, {q13}, d16
+	 vtbl.8	d7, {q13}, d17
+	veor	q15, q5, q9
+	 vtbl.8	d8, {q14}, d16
+	 vtbl.8	d9, {q14}, d17
+	veor	q10, q6, q9
+	 vtbl.8	d10, {q15}, d16
+	 vtbl.8	d11, {q15}, d17
+	veor	q11, q7, q9
+	 vtbl.8	d12, {q10}, d16
+	 vtbl.8	d13, {q10}, d17
+	 vtbl.8	d14, {q11}, d16
+	 vtbl.8	d15, {q11}, d17
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q4, #1
+	veor		q10, q10, q7
+	 veor		q11, q11, q5
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #1
+	 veor		q5, q5, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q3
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q5, #2
+	 vshr.u64	q11, q4, #2
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q5, q5, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q3
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q3, #4
+	 vshr.u64	q11, q2, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #4
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q4
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	sub	r5,r5,#1
+	b	.Ldec_sbox
+.align	4
+.Ldec_loop:
+	vldmia	r4!, {q8-q11}
+	veor	q8, q8, q0
+	veor	q9, q9, q1
+	vtbl.8	d0, {q8}, d24
+	vtbl.8	d1, {q8}, d25
+	vldmia	r4!, {q8}
+	veor	q10, q10, q2
+	vtbl.8	d2, {q9}, d24
+	vtbl.8	d3, {q9}, d25
+	vldmia	r4!, {q9}
+	veor	q11, q11, q3
+	vtbl.8	d4, {q10}, d24
+	vtbl.8	d5, {q10}, d25
+	vldmia	r4!, {q10}
+	vtbl.8	d6, {q11}, d24
+	vtbl.8	d7, {q11}, d25
+	vldmia	r4!, {q11}
+	veor	q8, q8, q4
+	veor	q9, q9, q5
+	vtbl.8	d8, {q8}, d24
+	vtbl.8	d9, {q8}, d25
+	veor	q10, q10, q6
+	vtbl.8	d10, {q9}, d24
+	vtbl.8	d11, {q9}, d25
+	veor	q11, q11, q7
+	vtbl.8	d12, {q10}, d24
+	vtbl.8	d13, {q10}, d25
+	vtbl.8	d14, {q11}, d24
+	vtbl.8	d15, {q11}, d25
+.Ldec_sbox:
+	 veor	q1, q1, q4
+	veor	q3, q3, q4
+
+	veor	q4, q4, q7
+	 veor	q1, q1, q6
+	veor	q2, q2, q7
+	veor	q6, q6, q4
+
+	veor	q0, q0, q1
+	veor	q2, q2, q5
+	 veor	q7, q7, q6
+	veor	q3, q3, q0
+	veor	q5, q5, q0
+	veor	q1, q1, q3
+	veor	q11, q3, q0
+	veor	q10, q7, q4
+	veor	q9, q1, q6
+	veor	q13, q4, q0
+	 vmov	q8, q10
+	veor	q12, q5, q2
+
+	vorr	q10, q10, q9
+	veor	q15, q11, q8
+	vand	q14, q11, q12
+	vorr	q11, q11, q12
+	veor	q12, q12, q9
+	vand	q8, q8, q9
+	veor	q9, q6, q2
+	vand	q15, q15, q12
+	vand	q13, q13, q9
+	veor	q9, q3, q7
+	veor	q12, q1, q5
+	veor	q11, q11, q13
+	veor	q10, q10, q13
+	vand	q13, q9, q12
+	vorr	q9, q9, q12
+	veor	q11, q11, q15
+	veor	q8, q8, q13
+	veor	q10, q10, q14
+	veor	q9, q9, q15
+	veor	q8, q8, q14
+	vand	q12, q4, q6
+	veor	q9, q9, q14
+	vand	q13, q0, q2
+	vand	q14, q7, q1
+	vorr	q15, q3, q5
+	veor	q11, q11, q12
+	veor	q9, q9, q14
+	veor	q8, q8, q15
+	veor	q10, q10, q13
+
+	@ Inv_GF16 	0, 	1, 	2, 	3, s0, s1, s2, s3
+
+	@ new smaller inversion
+
+	vand	q14, q11, q9
+	vmov	q12, q8
+
+	veor	q13, q10, q14
+	veor	q15, q8, q14
+	veor	q14, q8, q14	@ q14=q15
+
+	vbsl	q13, q9, q8
+	vbsl	q15, q11, q10
+	veor	q11, q11, q10
+
+	vbsl	q12, q13, q14
+	vbsl	q8, q14, q13
+
+	vand	q14, q12, q15
+	veor	q9, q9, q8
+
+	veor	q14, q14, q11
+	veor	q12, q5, q2
+	veor	q8, q1, q6
+	veor 	q10, q15, q14
+	vand	q10, q10, q5
+	veor	q5, q5, q1
+	vand	q11, q1, q15
+	vand	q5, q5, q14
+	veor	q1, q11, q10
+	veor	q5, q5, q11
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q2
+	veor	q12, q12, q8
+	 veor	q2, q2, q6
+	vand	q8, q8, q15
+	 vand	q6, q6, q13
+	vand	q12, q12, q14
+	 vand	q2, q2, q9
+	veor	q8, q8, q12
+	 veor	q2, q2, q6
+	veor	q12, q12, q11
+	 veor	q6, q6, q10
+	veor	q5, q5, q12
+	veor	q2, q2, q12
+	veor	q1, q1, q8
+	veor	q6, q6, q8
+
+	veor	q12, q3, q0
+	veor	q8, q7, q4
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q0
+	veor	q12, q12, q8
+	 veor	q0, q0, q4
+	vand	q8, q8, q15
+	 vand	q4, q4, q13
+	vand	q12, q12, q14
+	 vand	q0, q0, q9
+	veor	q8, q8, q12
+	 veor	q0, q0, q4
+	veor	q12, q12, q11
+	 veor	q4, q4, q10
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor 	q10, q15, q14
+	vand	q10, q10, q3
+	veor	q3, q3, q7
+	vand	q11, q7, q15
+	vand	q3, q3, q14
+	veor	q7, q11, q10
+	veor	q3, q3, q11
+	veor	q3, q3, q12
+	veor	q0, q0, q12
+	veor	q7, q7, q8
+	veor	q4, q4, q8
+	veor	q1, q1, q7
+	veor	q6, q6, q5
+
+	veor	q4, q4, q1
+	veor	q2, q2, q7
+	veor	q5, q5, q7
+	veor	q4, q4, q2
+	 veor 	q7, q7, q0
+	veor	q4, q4, q5
+	 veor	q3, q3, q6
+	 veor	q6, q6, q1
+	veor	q3, q3, q4
+
+	veor	q4, q4, q0
+	veor	q7, q7, q3
+	subs	r5,r5,#1
+	bcc	.Ldec_done
+	@ multiplication by 0x05-0x00-0x04-0x00
+	vext.8	q8, q0, q0, #8
+	vext.8	q14, q3, q3, #8
+	vext.8	q15, q5, q5, #8
+	veor	q8, q8, q0
+	vext.8	q9, q1, q1, #8
+	veor	q14, q14, q3
+	vext.8	q10, q6, q6, #8
+	veor	q15, q15, q5
+	vext.8	q11, q4, q4, #8
+	veor	q9, q9, q1
+	vext.8	q12, q2, q2, #8
+	veor	q10, q10, q6
+	vext.8	q13, q7, q7, #8
+	veor	q11, q11, q4
+	veor	q12, q12, q2
+	veor	q13, q13, q7
+
+	 veor	q0, q0, q14
+	 veor	q1, q1, q14
+	 veor	q6, q6, q8
+	 veor	q2, q2, q10
+	 veor	q4, q4, q9
+	 veor	q1, q1, q15
+	 veor	q6, q6, q15
+	 veor	q2, q2, q14
+	 veor	q7, q7, q11
+	 veor	q4, q4, q14
+	 veor	q3, q3, q12
+	 veor	q2, q2, q15
+	 veor	q7, q7, q15
+	 veor	q5, q5, q13
+	vext.8	q8, q0, q0, #12	@ x0 <<< 32
+	vext.8	q9, q1, q1, #12
+	 veor	q0, q0, q8		@ x0 ^ (x0 <<< 32)
+	vext.8	q10, q6, q6, #12
+	 veor	q1, q1, q9
+	vext.8	q11, q4, q4, #12
+	 veor	q6, q6, q10
+	vext.8	q12, q2, q2, #12
+	 veor	q4, q4, q11
+	vext.8	q13, q7, q7, #12
+	 veor	q2, q2, q12
+	vext.8	q14, q3, q3, #12
+	 veor	q7, q7, q13
+	vext.8	q15, q5, q5, #12
+	 veor	q3, q3, q14
+
+	veor	q9, q9, q0
+	 veor	q5, q5, q15
+	 vext.8	q0, q0, q0, #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	q10, q10, q1
+	veor	q8, q8, q5
+	veor	q9, q9, q5
+	 vext.8	q1, q1, q1, #8
+	veor	q13, q13, q2
+	 veor	q0, q0, q8
+	veor	q14, q14, q7
+	 veor	q1, q1, q9
+	 vext.8	q8, q2, q2, #8
+	veor	q12, q12, q4
+	 vext.8	q9, q7, q7, #8
+	veor	q15, q15, q3
+	 vext.8	q2, q4, q4, #8
+	veor	q11, q11, q6
+	 vext.8	q7, q5, q5, #8
+	veor	q12, q12, q5
+	 vext.8	q4, q3, q3, #8
+	veor	q11, q11, q5
+	 vext.8	q3, q6, q6, #8
+	veor	q5, q9, q13
+	veor	q11, q11, q2
+	veor	q7, q7, q15
+	veor	q6, q4, q14
+	veor	q4, q8, q12
+	veor	q2, q3, q10
+	vmov	q3, q11
+	 @ vmov	q5, q9
+	vldmia	r6, {q12}		@ .LISR
+	ite	eq				@ Thumb2 thing, sanity check in ARM
+	addeq	r6,r6,#0x10
+	bne	.Ldec_loop
+	vldmia	r6, {q12}		@ .LISRM0
+	b	.Ldec_loop
+.align	4
+.Ldec_done:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q3, #1
+	 vshr.u64	q11, q2, #1
+	veor		q10, q10, q5
+	 veor		q11, q11, q7
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #1
+	 veor		q7, q7, q11
+	 vshl.u64	q11, q11, #1
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q4
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q4, q4, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q7, #2
+	 vshr.u64	q11, q2, #2
+	veor		q10, q10, q5
+	 veor		q11, q11, q3
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #2
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #2
+	veor		q7, q7, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q4
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q4, q4, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q4, #4
+	 vshr.u64	q11, q6, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q3
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #4
+	veor		q4, q4, q10
+	 veor		q6, q6, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q2
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vldmia	r4, {q8}			@ last round key
+	veor	q6, q6, q8
+	veor	q4, q4, q8
+	veor	q2, q2, q8
+	veor	q7, q7, q8
+	veor	q3, q3, q8
+	veor	q5, q5, q8
+	veor	q0, q0, q8
+	veor	q1, q1, q8
+	bx	lr
+.size	_bsaes_decrypt8,.-_bsaes_decrypt8
+
+.type	_bsaes_const,%object
+.align	6
+_bsaes_const:
+.LM0ISR:	@ InvShiftRows constants
+	.quad	0x0a0e0206070b0f03, 0x0004080c0d010509
+.LISR:
+	.quad	0x0504070602010003, 0x0f0e0d0c080b0a09
+.LISRM0:
+	.quad	0x01040b0e0205080f, 0x0306090c00070a0d
+.LM0SR:		@ ShiftRows constants
+	.quad	0x0a0e02060f03070b, 0x0004080c05090d01
+.LSR:
+	.quad	0x0504070600030201, 0x0f0e0d0c0a09080b
+.LSRM0:
+	.quad	0x0304090e00050a0f, 0x01060b0c0207080d
+.LM0:
+	.quad	0x02060a0e03070b0f, 0x0004080c0105090d
+.LREVM0SR:
+	.quad	0x090d01050c000408, 0x03070b0f060a0e02
+.asciz	"Bit-sliced AES for NEON, CRYPTOGAMS by <appro@openssl.org>"
+.align	6
+.size	_bsaes_const,.-_bsaes_const
+
+.type	_bsaes_encrypt8,%function
+.align	4
+_bsaes_encrypt8:
+	adr	r6,_bsaes_encrypt8
+	vldmia	r4!, {q9}		@ round 0 key
+	sub	r6,r6,#_bsaes_encrypt8-.LM0SR
+
+	vldmia	r6!, {q8}		@ .LM0SR
+_bsaes_encrypt8_alt:
+	veor	q10, q0, q9	@ xor with round0 key
+	veor	q11, q1, q9
+	 vtbl.8	d0, {q10}, d16
+	 vtbl.8	d1, {q10}, d17
+	veor	q12, q2, q9
+	 vtbl.8	d2, {q11}, d16
+	 vtbl.8	d3, {q11}, d17
+	veor	q13, q3, q9
+	 vtbl.8	d4, {q12}, d16
+	 vtbl.8	d5, {q12}, d17
+	veor	q14, q4, q9
+	 vtbl.8	d6, {q13}, d16
+	 vtbl.8	d7, {q13}, d17
+	veor	q15, q5, q9
+	 vtbl.8	d8, {q14}, d16
+	 vtbl.8	d9, {q14}, d17
+	veor	q10, q6, q9
+	 vtbl.8	d10, {q15}, d16
+	 vtbl.8	d11, {q15}, d17
+	veor	q11, q7, q9
+	 vtbl.8	d12, {q10}, d16
+	 vtbl.8	d13, {q10}, d17
+	 vtbl.8	d14, {q11}, d16
+	 vtbl.8	d15, {q11}, d17
+_bsaes_encrypt8_bitslice:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q4, #1
+	veor		q10, q10, q7
+	 veor		q11, q11, q5
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #1
+	 veor		q5, q5, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q3
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q5, #2
+	 vshr.u64	q11, q4, #2
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q5, q5, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q3
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q3, #4
+	 vshr.u64	q11, q2, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #4
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q4
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	sub	r5,r5,#1
+	b	.Lenc_sbox
+.align	4
+.Lenc_loop:
+	vldmia	r4!, {q8-q11}
+	veor	q8, q8, q0
+	veor	q9, q9, q1
+	vtbl.8	d0, {q8}, d24
+	vtbl.8	d1, {q8}, d25
+	vldmia	r4!, {q8}
+	veor	q10, q10, q2
+	vtbl.8	d2, {q9}, d24
+	vtbl.8	d3, {q9}, d25
+	vldmia	r4!, {q9}
+	veor	q11, q11, q3
+	vtbl.8	d4, {q10}, d24
+	vtbl.8	d5, {q10}, d25
+	vldmia	r4!, {q10}
+	vtbl.8	d6, {q11}, d24
+	vtbl.8	d7, {q11}, d25
+	vldmia	r4!, {q11}
+	veor	q8, q8, q4
+	veor	q9, q9, q5
+	vtbl.8	d8, {q8}, d24
+	vtbl.8	d9, {q8}, d25
+	veor	q10, q10, q6
+	vtbl.8	d10, {q9}, d24
+	vtbl.8	d11, {q9}, d25
+	veor	q11, q11, q7
+	vtbl.8	d12, {q10}, d24
+	vtbl.8	d13, {q10}, d25
+	vtbl.8	d14, {q11}, d24
+	vtbl.8	d15, {q11}, d25
+.Lenc_sbox:
+	veor	q2, q2, q1
+	veor	q5, q5, q6
+	veor	q3, q3, q0
+	veor	q6, q6, q2
+	veor	q5, q5, q0
+
+	veor	q6, q6, q3
+	veor	q3, q3, q7
+	veor	q7, q7, q5
+	veor	q3, q3, q4
+	veor	q4, q4, q5
+
+	veor	q2, q2, q7
+	veor	q3, q3, q1
+	veor	q1, q1, q5
+	veor	q11, q7, q4
+	veor	q10, q1, q2
+	veor	q9, q5, q3
+	veor	q13, q2, q4
+	 vmov	q8, q10
+	veor	q12, q6, q0
+
+	vorr	q10, q10, q9
+	veor	q15, q11, q8
+	vand	q14, q11, q12
+	vorr	q11, q11, q12
+	veor	q12, q12, q9
+	vand	q8, q8, q9
+	veor	q9, q3, q0
+	vand	q15, q15, q12
+	vand	q13, q13, q9
+	veor	q9, q7, q1
+	veor	q12, q5, q6
+	veor	q11, q11, q13
+	veor	q10, q10, q13
+	vand	q13, q9, q12
+	vorr	q9, q9, q12
+	veor	q11, q11, q15
+	veor	q8, q8, q13
+	veor	q10, q10, q14
+	veor	q9, q9, q15
+	veor	q8, q8, q14
+	vand	q12, q2, q3
+	veor	q9, q9, q14
+	vand	q13, q4, q0
+	vand	q14, q1, q5
+	vorr	q15, q7, q6
+	veor	q11, q11, q12
+	veor	q9, q9, q14
+	veor	q8, q8, q15
+	veor	q10, q10, q13
+
+	@ Inv_GF16 	0, 	1, 	2, 	3, s0, s1, s2, s3
+
+	@ new smaller inversion
+
+	vand	q14, q11, q9
+	vmov	q12, q8
+
+	veor	q13, q10, q14
+	veor	q15, q8, q14
+	veor	q14, q8, q14	@ q14=q15
+
+	vbsl	q13, q9, q8
+	vbsl	q15, q11, q10
+	veor	q11, q11, q10
+
+	vbsl	q12, q13, q14
+	vbsl	q8, q14, q13
+
+	vand	q14, q12, q15
+	veor	q9, q9, q8
+
+	veor	q14, q14, q11
+	veor	q12, q6, q0
+	veor	q8, q5, q3
+	veor 	q10, q15, q14
+	vand	q10, q10, q6
+	veor	q6, q6, q5
+	vand	q11, q5, q15
+	vand	q6, q6, q14
+	veor	q5, q11, q10
+	veor	q6, q6, q11
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q0
+	veor	q12, q12, q8
+	 veor	q0, q0, q3
+	vand	q8, q8, q15
+	 vand	q3, q3, q13
+	vand	q12, q12, q14
+	 vand	q0, q0, q9
+	veor	q8, q8, q12
+	 veor	q0, q0, q3
+	veor	q12, q12, q11
+	 veor	q3, q3, q10
+	veor	q6, q6, q12
+	veor	q0, q0, q12
+	veor	q5, q5, q8
+	veor	q3, q3, q8
+
+	veor	q12, q7, q4
+	veor	q8, q1, q2
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q4
+	veor	q12, q12, q8
+	 veor	q4, q4, q2
+	vand	q8, q8, q15
+	 vand	q2, q2, q13
+	vand	q12, q12, q14
+	 vand	q4, q4, q9
+	veor	q8, q8, q12
+	 veor	q4, q4, q2
+	veor	q12, q12, q11
+	 veor	q2, q2, q10
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor 	q10, q15, q14
+	vand	q10, q10, q7
+	veor	q7, q7, q1
+	vand	q11, q1, q15
+	vand	q7, q7, q14
+	veor	q1, q11, q10
+	veor	q7, q7, q11
+	veor	q7, q7, q12
+	veor	q4, q4, q12
+	veor	q1, q1, q8
+	veor	q2, q2, q8
+	veor	q7, q7, q0
+	veor	q1, q1, q6
+	veor	q6, q6, q0
+	veor	q4, q4, q7
+	veor	q0, q0, q1
+
+	veor	q1, q1, q5
+	veor	q5, q5, q2
+	veor	q2, q2, q3
+	veor	q3, q3, q5
+	veor	q4, q4, q5
+
+	veor	q6, q6, q3
+	subs	r5,r5,#1
+	bcc	.Lenc_done
+	vext.8	q8, q0, q0, #12	@ x0 <<< 32
+	vext.8	q9, q1, q1, #12
+	 veor	q0, q0, q8		@ x0 ^ (x0 <<< 32)
+	vext.8	q10, q4, q4, #12
+	 veor	q1, q1, q9
+	vext.8	q11, q6, q6, #12
+	 veor	q4, q4, q10
+	vext.8	q12, q3, q3, #12
+	 veor	q6, q6, q11
+	vext.8	q13, q7, q7, #12
+	 veor	q3, q3, q12
+	vext.8	q14, q2, q2, #12
+	 veor	q7, q7, q13
+	vext.8	q15, q5, q5, #12
+	 veor	q2, q2, q14
+
+	veor	q9, q9, q0
+	 veor	q5, q5, q15
+	 vext.8	q0, q0, q0, #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	q10, q10, q1
+	veor	q8, q8, q5
+	veor	q9, q9, q5
+	 vext.8	q1, q1, q1, #8
+	veor	q13, q13, q3
+	 veor	q0, q0, q8
+	veor	q14, q14, q7
+	 veor	q1, q1, q9
+	 vext.8	q8, q3, q3, #8
+	veor	q12, q12, q6
+	 vext.8	q9, q7, q7, #8
+	veor	q15, q15, q2
+	 vext.8	q3, q6, q6, #8
+	veor	q11, q11, q4
+	 vext.8	q7, q5, q5, #8
+	veor	q12, q12, q5
+	 vext.8	q6, q2, q2, #8
+	veor	q11, q11, q5
+	 vext.8	q2, q4, q4, #8
+	veor	q5, q9, q13
+	veor	q4, q8, q12
+	veor	q3, q3, q11
+	veor	q7, q7, q15
+	veor	q6, q6, q14
+	 @ vmov	q4, q8
+	veor	q2, q2, q10
+	 @ vmov	q5, q9
+	vldmia	r6, {q12}		@ .LSR
+	ite	eq				@ Thumb2 thing, samity check in ARM
+	addeq	r6,r6,#0x10
+	bne	.Lenc_loop
+	vldmia	r6, {q12}		@ .LSRM0
+	b	.Lenc_loop
+.align	4
+.Lenc_done:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q3, #1
+	veor		q10, q10, q5
+	 veor		q11, q11, q7
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #1
+	 veor		q7, q7, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q3, q3, q11
+	vshr.u64	q10, q4, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q6
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q6, q6, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q4, q4, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q7, #2
+	 vshr.u64	q11, q3, #2
+	veor		q10, q10, q5
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q7, q7, q10
+	 veor		q3, q3, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q6
+	 veor		q11, q11, q4
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q6, q6, q10
+	vshl.u64	q10, q10, #2
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q6, #4
+	 vshr.u64	q11, q4, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q2
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #4
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q3
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vldmia	r4, {q8}			@ last round key
+	veor	q4, q4, q8
+	veor	q6, q6, q8
+	veor	q3, q3, q8
+	veor	q7, q7, q8
+	veor	q2, q2, q8
+	veor	q5, q5, q8
+	veor	q0, q0, q8
+	veor	q1, q1, q8
+	bx	lr
+.size	_bsaes_encrypt8,.-_bsaes_encrypt8
+.type	_bsaes_key_convert,%function
+.align	4
+_bsaes_key_convert:
+	adr	r6,_bsaes_key_convert
+	vld1.8	{q7},  [r4]!		@ load round 0 key
+	sub	r6,r6,#_bsaes_key_convert-.LM0
+	vld1.8	{q15}, [r4]!		@ load round 1 key
+
+	vmov.i8	q8,  #0x01			@ bit masks
+	vmov.i8	q9,  #0x02
+	vmov.i8	q10, #0x04
+	vmov.i8	q11, #0x08
+	vmov.i8	q12, #0x10
+	vmov.i8	q13, #0x20
+	vldmia	r6, {q14}		@ .LM0
+
+#ifdef __ARMEL__
+	vrev32.8	q7,  q7
+	vrev32.8	q15, q15
+#endif
+	sub	r5,r5,#1
+	vstmia	r12!, {q7}		@ save round 0 key
+	b	.Lkey_loop
+
+.align	4
+.Lkey_loop:
+	vtbl.8	d14,{q15},d28
+	vtbl.8	d15,{q15},d29
+	vmov.i8	q6,  #0x40
+	vmov.i8	q15, #0x80
+
+	vtst.8	q0, q7, q8
+	vtst.8	q1, q7, q9
+	vtst.8	q2, q7, q10
+	vtst.8	q3, q7, q11
+	vtst.8	q4, q7, q12
+	vtst.8	q5, q7, q13
+	vtst.8	q6, q7, q6
+	vtst.8	q7, q7, q15
+	vld1.8	{q15}, [r4]!		@ load next round key
+	vmvn	q0, q0		@ "pnot"
+	vmvn	q1, q1
+	vmvn	q5, q5
+	vmvn	q6, q6
+#ifdef __ARMEL__
+	vrev32.8	q15, q15
+#endif
+	subs	r5,r5,#1
+	vstmia	r12!,{q0-q7}		@ write bit-sliced round key
+	bne	.Lkey_loop
+
+	vmov.i8	q7,#0x63			@ compose .L63
+	@ don't save last round key
+	bx	lr
+.size	_bsaes_key_convert,.-_bsaes_key_convert
+.extern AES_cbc_encrypt
+.extern AES_decrypt
+
+.global	bsaes_cbc_encrypt
+.type	bsaes_cbc_encrypt,%function
+.align	5
+bsaes_cbc_encrypt:
+#ifndef	__KERNEL__
+	cmp	r2, #128
+#ifndef	__thumb__
+	blo	AES_cbc_encrypt
+#else
+	bhs	1f
+	b	AES_cbc_encrypt
+1:
+#endif
+#endif
+
+	@ it is up to the caller to make sure we are called with enc == 0
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	r8, [ip]			@ IV is 1st arg on the stack
+	mov	r2, r2, lsr#4		@ len in 16 byte blocks
+	sub	sp, #0x10			@ scratch space to carry over the IV
+	mov	r9, sp				@ save sp
+
+	ldr	r10, [r3, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r10, lsl#7		@ 128 bytes per inner round key
+	add	r12, #96			@ sifze of bit-slices key schedule
+
+	@ populate the key schedule
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	mov	sp, r12				@ sp is sp
+	bl	_bsaes_key_convert
+	vldmia	sp, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	sp, {q7}
+#else
+	ldr	r12, [r3, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [r3, #244]
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	add	r12, r3, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, r3, #248
+	vldmia	r4, {q6}
+	vstmia	r12, {q15}			@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+
+.align	2
+0:
+#endif
+
+	vld1.8	{q15}, [r8]		@ load IV
+	b	.Lcbc_dec_loop
+
+.align	4
+.Lcbc_dec_loop:
+	subs	r2, r2, #0x8
+	bmi	.Lcbc_dec_loop_finish
+
+	vld1.8	{q0-q1}, [r0]!	@ load input
+	vld1.8	{q2-q3}, [r0]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, sp			@ pass the key
+#else
+	add	r4, r3, #248
+#endif
+	vld1.8	{q4-q5}, [r0]!
+	mov	r5, r10
+	vld1.8	{q6-q7}, [r0]
+	sub	r0, r0, #0x60
+	vstmia	r9, {q15}			@ put aside IV
+
+	bl	_bsaes_decrypt8
+
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12-q13}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q14-q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q3, q3, q13
+	vst1.8	{q6}, [r1]!
+	veor	q5, q5, q14
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	vst1.8	{q3}, [r1]!
+	vst1.8	{q5}, [r1]!
+
+	b	.Lcbc_dec_loop
+
+.Lcbc_dec_loop_finish:
+	adds	r2, r2, #8
+	beq	.Lcbc_dec_done
+
+	vld1.8	{q0}, [r0]!		@ load input
+	cmp	r2, #2
+	blo	.Lcbc_dec_one
+	vld1.8	{q1}, [r0]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, sp			@ pass the key
+#else
+	add	r4, r3, #248
+#endif
+	mov	r5, r10
+	vstmia	r9, {q15}			@ put aside IV
+	beq	.Lcbc_dec_two
+	vld1.8	{q2}, [r0]!
+	cmp	r2, #4
+	blo	.Lcbc_dec_three
+	vld1.8	{q3}, [r0]!
+	beq	.Lcbc_dec_four
+	vld1.8	{q4}, [r0]!
+	cmp	r2, #6
+	blo	.Lcbc_dec_five
+	vld1.8	{q5}, [r0]!
+	beq	.Lcbc_dec_six
+	vld1.8	{q6}, [r0]!
+	sub	r0, r0, #0x70
+
+	bl	_bsaes_decrypt8
+
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12-q13}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q3, q3, q13
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	vst1.8	{q3}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_six:
+	sub	r0, r0, #0x60
+	bl	_bsaes_decrypt8
+	vldmia	r9,{q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_five:
+	sub	r0, r0, #0x50
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q15}, [r0]!
+	veor	q4, q4, q10
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q2, q2, q11
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_four:
+	sub	r0, r0, #0x40
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q15}, [r0]!
+	veor	q4, q4, q10
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_three:
+	sub	r0, r0, #0x30
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q15}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_two:
+	sub	r0, r0, #0x20
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8}, [r0]!		@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q15}, [r0]!		@ reload input
+	veor	q1, q1, q8
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_one:
+	sub	r0, r0, #0x10
+	mov	r10, r1			@ save original out pointer
+	mov	r1, r9			@ use the iv scratch space as out buffer
+	mov	r2, r3
+	vmov	q4,q15		@ just in case ensure that IV
+	vmov	q5,q0			@ and input are preserved
+	bl	AES_decrypt
+	vld1.8	{q0}, [r9,:64]		@ load result
+	veor	q0, q0, q4	@ ^= IV
+	vmov	q15, q5		@ q5 holds input
+	vst1.8	{q0}, [r10]		@ write output
+
+.Lcbc_dec_done:
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+.Lcbc_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r9
+	bne		.Lcbc_dec_bzero
+#endif
+
+	mov	sp, r9
+	add	sp, #0x10			@ add sp,r9,#0x10 is no good for thumb
+	vst1.8	{q15}, [r8]		@ return IV
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}
+.size	bsaes_cbc_encrypt,.-bsaes_cbc_encrypt
+.extern	AES_encrypt
+.global	bsaes_ctr32_encrypt_blocks
+.type	bsaes_ctr32_encrypt_blocks,%function
+.align	5
+bsaes_ctr32_encrypt_blocks:
+	cmp	r2, #8			@ use plain AES for
+	blo	.Lctr_enc_short			@ small sizes
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	r8, [ip]			@ ctr is 1st arg on the stack
+	sub	sp, sp, #0x10			@ scratch space to carry over the ctr
+	mov	r9, sp				@ save sp
+
+	ldr	r10, [r3, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r10, lsl#7		@ 128 bytes per inner round key
+	add	r12, #96			@ size of bit-sliced key schedule
+
+	@ populate the key schedule
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	mov	sp, r12				@ sp is sp
+	bl	_bsaes_key_convert
+	veor	q7,q7,q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+
+	vld1.8	{q0}, [r8]		@ load counter
+	add	r8, r6, #.LREVM0SR-.LM0	@ borrow r8
+	vldmia	sp, {q4}		@ load round0 key
+#else
+	ldr	r12, [r3, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [r3, #244]
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	add	r12, r3, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7,q7,q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+
+.align	2
+0:	add	r12, r3, #248
+	vld1.8	{q0}, [r8]		@ load counter
+	adrl	r8, .LREVM0SR			@ borrow r8
+	vldmia	r12, {q4}			@ load round0 key
+	sub	sp, #0x10			@ place for adjusted round0 key
+#endif
+
+	vmov.i32	q8,#1		@ compose 1<<96
+	veor		q9,q9,q9
+	vrev32.8	q0,q0
+	vext.8		q8,q9,q8,#4
+	vrev32.8	q4,q4
+	vadd.u32	q9,q8,q8	@ compose 2<<96
+	vstmia	sp, {q4}		@ save adjusted round0 key
+	b	.Lctr_enc_loop
+
+.align	4
+.Lctr_enc_loop:
+	vadd.u32	q10, q8, q9	@ compose 3<<96
+	vadd.u32	q1, q0, q8	@ +1
+	vadd.u32	q2, q0, q9	@ +2
+	vadd.u32	q3, q0, q10	@ +3
+	vadd.u32	q4, q1, q10
+	vadd.u32	q5, q2, q10
+	vadd.u32	q6, q3, q10
+	vadd.u32	q7, q4, q10
+	vadd.u32	q10, q5, q10	@ next counter
+
+	@ Borrow prologue from _bsaes_encrypt8 to use the opportunity
+	@ to flip byte order in 32-bit counter
+
+	vldmia		sp, {q9}		@ load round0 key
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x10		@ pass next round key
+#else
+	add		r4, r3, #264
+#endif
+	vldmia		r8, {q8}			@ .LREVM0SR
+	mov		r5, r10			@ pass rounds
+	vstmia		r9, {q10}			@ save next counter
+	sub		r6, r8, #.LREVM0SR-.LSR	@ pass constants
+
+	bl		_bsaes_encrypt8_alt
+
+	subs		r2, r2, #8
+	blo		.Lctr_enc_loop_done
+
+	vld1.8		{q8-q9}, [r0]!	@ load input
+	vld1.8		{q10-q11}, [r0]!
+	veor		q0, q8
+	veor		q1, q9
+	vld1.8		{q12-q13}, [r0]!
+	veor		q4, q10
+	veor		q6, q11
+	vld1.8		{q14-q15}, [r0]!
+	veor		q3, q12
+	vst1.8		{q0-q1}, [r1]!	@ write output
+	veor		q7, q13
+	veor		q2, q14
+	vst1.8		{q4}, [r1]!
+	veor		q5, q15
+	vst1.8		{q6}, [r1]!
+	vmov.i32	q8, #1			@ compose 1<<96
+	vst1.8		{q3}, [r1]!
+	veor		q9, q9, q9
+	vst1.8		{q7}, [r1]!
+	vext.8		q8, q9, q8, #4
+	vst1.8		{q2}, [r1]!
+	vadd.u32	q9,q8,q8		@ compose 2<<96
+	vst1.8		{q5}, [r1]!
+	vldmia		r9, {q0}			@ load counter
+
+	bne		.Lctr_enc_loop
+	b		.Lctr_enc_done
+
+.align	4
+.Lctr_enc_loop_done:
+	add		r2, r2, #8
+	vld1.8		{q8}, [r0]!	@ load input
+	veor		q0, q8
+	vst1.8		{q0}, [r1]!	@ write output
+	cmp		r2, #2
+	blo		.Lctr_enc_done
+	vld1.8		{q9}, [r0]!
+	veor		q1, q9
+	vst1.8		{q1}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q10}, [r0]!
+	veor		q4, q10
+	vst1.8		{q4}, [r1]!
+	cmp		r2, #4
+	blo		.Lctr_enc_done
+	vld1.8		{q11}, [r0]!
+	veor		q6, q11
+	vst1.8		{q6}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q12}, [r0]!
+	veor		q3, q12
+	vst1.8		{q3}, [r1]!
+	cmp		r2, #6
+	blo		.Lctr_enc_done
+	vld1.8		{q13}, [r0]!
+	veor		q7, q13
+	vst1.8		{q7}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q14}, [r0]
+	veor		q2, q14
+	vst1.8		{q2}, [r1]!
+
+.Lctr_enc_done:
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifndef	BSAES_ASM_EXTENDED_KEY
+.Lctr_enc_bzero:			@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r9
+	bne		.Lctr_enc_bzero
+#else
+	vstmia		sp, {q0-q1}
+#endif
+
+	mov	sp, r9
+	add	sp, #0x10		@ add sp,r9,#0x10 is no good for thumb
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}	@ return
+
+.align	4
+.Lctr_enc_short:
+	ldr	ip, [sp]		@ ctr pointer is passed on stack
+	stmdb	sp!, {r4-r8, lr}
+
+	mov	r4, r0		@ copy arguments
+	mov	r5, r1
+	mov	r6, r2
+	mov	r7, r3
+	ldr	r8, [ip, #12]		@ load counter LSW
+	vld1.8	{q1}, [ip]		@ load whole counter value
+#ifdef __ARMEL__
+	rev	r8, r8
+#endif
+	sub	sp, sp, #0x10
+	vst1.8	{q1}, [sp,:64]	@ copy counter value
+	sub	sp, sp, #0x10
+
+.Lctr_enc_short_loop:
+	add	r0, sp, #0x10		@ input counter value
+	mov	r1, sp			@ output on the stack
+	mov	r2, r7			@ key
+
+	bl	AES_encrypt
+
+	vld1.8	{q0}, [r4]!	@ load input
+	vld1.8	{q1}, [sp,:64]	@ load encrypted counter
+	add	r8, r8, #1
+#ifdef __ARMEL__
+	rev	r0, r8
+	str	r0, [sp, #0x1c]		@ next counter value
+#else
+	str	r8, [sp, #0x1c]		@ next counter value
+#endif
+	veor	q0,q0,q1
+	vst1.8	{q0}, [r5]!	@ store output
+	subs	r6, r6, #1
+	bne	.Lctr_enc_short_loop
+
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+	vstmia		sp!, {q0-q1}
+
+	ldmia	sp!, {r4-r8, pc}
+.size	bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks
+.globl	bsaes_xts_encrypt
+.type	bsaes_xts_encrypt,%function
+.align	4
+bsaes_xts_encrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future r3
+
+	mov	r7, r0
+	mov	r8, r1
+	mov	r9, r2
+	mov	r10, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0,sp				@ pointer to initial tweak
+#endif
+
+	ldr	r1, [r10, #240]		@ get # of rounds
+	mov	r3, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r1, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #96			@ size of bit-sliced key schedule
+	sub	r12, #48			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7, q7, q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+#else
+	ldr	r12, [r10, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [r10, #244]
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	add	r12, r10, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7, q7, q15	@ fix up last round key
+	vstmia	r12, {q7}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+
+	vld1.8	{q8}, [r0]			@ initial tweak
+	adr	r2, .Lxts_magic
+
+	subs	r9, #0x80
+	blo	.Lxts_enc_short
+	b	.Lxts_enc_loop
+
+.align	4
+.Lxts_enc_loop:
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q6, q8, #63
+	mov		r0, sp
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q9, #63
+	veor		q9, q9, q6
+	vand		q7, q7, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q10, #63
+	veor		q10, q10, q7
+	vand		q6, q6, q5
+	vld1.8		{q0}, [r7]!
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q11, #63
+	veor		q11, q11, q6
+	vand		q7, q7, q5
+	vld1.8		{q1}, [r7]!
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q12, #63
+	veor		q12, q12, q7
+	vand		q6, q6, q5
+	vld1.8		{q2}, [r7]!
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q13, #63
+	veor		q13, q13, q6
+	vand		q7, q7, q5
+	vld1.8		{q3}, [r7]!
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q14, #63
+	veor		q14, q14, q7
+	vand		q6, q6, q5
+	vld1.8		{q4}, [r7]!
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q15, #63
+	veor		q15, q15, q6
+	vand		q7, q7, q5
+	vld1.8		{q5}, [r7]!
+	veor		q4, q4, q12
+	vadd.u64	q8, q15, q15
+	vst1.64		{q15}, [r0,:128]!
+	vswp		d15,d14
+	veor		q8, q8, q7
+	vst1.64		{q8}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6-q7}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	veor		q7, q7, q15
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vld1.64		{q14-q15}, [r0,:128]!
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q2, q14
+	vst1.8		{q10-q11}, [r8]!
+	veor		q13, q5, q15
+	vst1.8		{q12-q13}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+
+	subs		r9, #0x80
+	bpl		.Lxts_enc_loop
+
+.Lxts_enc_short:
+	adds		r9, #0x70
+	bmi		.Lxts_enc_done
+
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q7, q8, #63
+	mov		r0, sp
+	vand		q7, q7, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q9, #63
+	veor		q9, q9, q7
+	vand		q6, q6, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q10, #63
+	veor		q10, q10, q6
+	vand		q7, q7, q5
+	vld1.8		{q0}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_1
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q11, #63
+	veor		q11, q11, q7
+	vand		q6, q6, q5
+	vld1.8		{q1}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_2
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q12, #63
+	veor		q12, q12, q6
+	vand		q7, q7, q5
+	vld1.8		{q2}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_3
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q13, #63
+	veor		q13, q13, q7
+	vand		q6, q6, q5
+	vld1.8		{q3}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_4
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q14, #63
+	veor		q14, q14, q6
+	vand		q7, q7, q5
+	vld1.8		{q4}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_5
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q15, #63
+	veor		q15, q15, q7
+	vand		q6, q6, q5
+	vld1.8		{q5}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_6
+	veor		q4, q4, q12
+	sub		r9, #0x10
+	vst1.64		{q15}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vld1.64		{q14}, [r0,:128]!
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q2, q14
+	vst1.8		{q10-q11}, [r8]!
+	vst1.8		{q12}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_6:
+	vst1.64		{q14}, [r0,:128]		@ next round tweak
+
+	veor		q4, q4, q12
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q5, q5, q13
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	vst1.8		{q10-q11}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+
+@ put this in range for both ARM and Thumb mode adr instructions
+.align	5
+.Lxts_magic:
+	.quad	1, 0x87
+
+.align	5
+.Lxts_enc_5:
+	vst1.64		{q13}, [r0,:128]		@ next round tweak
+
+	veor		q3, q3, q11
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q4, q4, q12
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	vst1.8		{q10}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_4:
+	vst1.64		{q12}, [r0,:128]		@ next round tweak
+
+	veor		q2, q2, q10
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q3, q3, q11
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vst1.8		{q8-q9}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_3:
+	vst1.64		{q11}, [r0,:128]		@ next round tweak
+
+	veor		q1, q1, q9
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q2, q2, q10
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	vst1.8		{q8}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_2:
+	vst1.64		{q10}, [r0,:128]		@ next round tweak
+
+	veor		q0, q0, q8
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q1, q1, q9
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	vst1.8		{q0-q1}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_1:
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3				@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r8]!
+	mov		r3, r4
+
+	vmov		q8, q9		@ next round tweak
+
+.Lxts_enc_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		r9, #0x10
+	beq		.Lxts_enc_ret
+	sub		r6, r8, #0x10
+
+.Lxts_enc_steal:
+	ldrb		r0, [r7], #1
+	ldrb		r1, [r8, #-0x10]
+	strb		r0, [r8, #-0x10]
+	strb		r1, [r8], #1
+
+	subs		r9, #1
+	bhi		.Lxts_enc_steal
+
+	vld1.8		{q0}, [r6]
+	mov		r0, sp
+	veor		q0, q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3			@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r6]
+	mov		r3, r4
+#endif
+
+.Lxts_enc_ret:
+	bic		r0, r3, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [r3, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_enc_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_enc_bzero
+
+	mov		sp, r3
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{q8}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_encrypt,.-bsaes_xts_encrypt
+
+.globl	bsaes_xts_decrypt
+.type	bsaes_xts_decrypt,%function
+.align	4
+bsaes_xts_decrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future r3
+
+	mov	r7, r0
+	mov	r8, r1
+	mov	r9, r2
+	mov	r10, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0, sp				@ pointer to initial tweak
+#endif
+
+	ldr	r1, [r10, #240]		@ get # of rounds
+	mov	r3, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r1, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #96			@ size of bit-sliced key schedule
+	sub	r12, #48			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, sp, #0x90
+	vldmia	r4, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+#else
+	ldr	r12, [r10, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [r10, #244]
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	add	r12, r10, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, r10, #248
+	vldmia	r4, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+	vld1.8	{q8}, [r0]			@ initial tweak
+	adr	r2, .Lxts_magic
+
+	tst	r9, #0xf			@ if not multiple of 16
+	it	ne				@ Thumb2 thing, sanity check in ARM
+	subne	r9, #0x10			@ subtract another 16 bytes
+	subs	r9, #0x80
+
+	blo	.Lxts_dec_short
+	b	.Lxts_dec_loop
+
+.align	4
+.Lxts_dec_loop:
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q6, q8, #63
+	mov		r0, sp
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q9, #63
+	veor		q9, q9, q6
+	vand		q7, q7, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q10, #63
+	veor		q10, q10, q7
+	vand		q6, q6, q5
+	vld1.8		{q0}, [r7]!
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q11, #63
+	veor		q11, q11, q6
+	vand		q7, q7, q5
+	vld1.8		{q1}, [r7]!
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q12, #63
+	veor		q12, q12, q7
+	vand		q6, q6, q5
+	vld1.8		{q2}, [r7]!
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q13, #63
+	veor		q13, q13, q6
+	vand		q7, q7, q5
+	vld1.8		{q3}, [r7]!
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q14, #63
+	veor		q14, q14, q7
+	vand		q6, q6, q5
+	vld1.8		{q4}, [r7]!
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q15, #63
+	veor		q15, q15, q6
+	vand		q7, q7, q5
+	vld1.8		{q5}, [r7]!
+	veor		q4, q4, q12
+	vadd.u64	q8, q15, q15
+	vst1.64		{q15}, [r0,:128]!
+	vswp		d15,d14
+	veor		q8, q8, q7
+	vst1.64		{q8}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6-q7}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	veor		q7, q7, q15
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vld1.64		{q14-q15}, [r0,:128]!
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q3, q14
+	vst1.8		{q10-q11}, [r8]!
+	veor		q13, q5, q15
+	vst1.8		{q12-q13}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+
+	subs		r9, #0x80
+	bpl		.Lxts_dec_loop
+
+.Lxts_dec_short:
+	adds		r9, #0x70
+	bmi		.Lxts_dec_done
+
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q7, q8, #63
+	mov		r0, sp
+	vand		q7, q7, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q9, #63
+	veor		q9, q9, q7
+	vand		q6, q6, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q10, #63
+	veor		q10, q10, q6
+	vand		q7, q7, q5
+	vld1.8		{q0}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_1
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q11, #63
+	veor		q11, q11, q7
+	vand		q6, q6, q5
+	vld1.8		{q1}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_2
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q12, #63
+	veor		q12, q12, q6
+	vand		q7, q7, q5
+	vld1.8		{q2}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_3
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q13, #63
+	veor		q13, q13, q7
+	vand		q6, q6, q5
+	vld1.8		{q3}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_4
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q14, #63
+	veor		q14, q14, q6
+	vand		q7, q7, q5
+	vld1.8		{q4}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_5
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q15, #63
+	veor		q15, q15, q7
+	vand		q6, q6, q5
+	vld1.8		{q5}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_6
+	veor		q4, q4, q12
+	sub		r9, #0x10
+	vst1.64		{q15}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vld1.64		{q14}, [r0,:128]!
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q3, q14
+	vst1.8		{q10-q11}, [r8]!
+	vst1.8		{q12}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_6:
+	vst1.64		{q14}, [r0,:128]		@ next round tweak
+
+	veor		q4, q4, q12
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q5, q5, q13
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	vst1.8		{q10-q11}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_5:
+	vst1.64		{q13}, [r0,:128]		@ next round tweak
+
+	veor		q3, q3, q11
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q4, q4, q12
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	vst1.8		{q10}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_4:
+	vst1.64		{q12}, [r0,:128]		@ next round tweak
+
+	veor		q2, q2, q10
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q3, q3, q11
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vst1.8		{q8-q9}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_3:
+	vst1.64		{q11}, [r0,:128]		@ next round tweak
+
+	veor		q1, q1, q9
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q2, q2, q10
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	vst1.8		{q8}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_2:
+	vst1.64		{q10}, [r0,:128]		@ next round tweak
+
+	veor		q0, q0, q8
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q1, q1, q9
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	vst1.8		{q0-q1}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_1:
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3				@ preserve fp
+	mov		r5, r2			@ preserve magic
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r8]!
+	mov		r3, r4
+	mov		r2, r5
+
+	vmov		q8, q9		@ next round tweak
+
+.Lxts_dec_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		r9, #0x10
+	beq		.Lxts_dec_ret
+
+	@ calculate one round of extra tweak for the stolen ciphertext
+	vldmia		r2, {q5}
+	vshr.s64	q6, q8, #63
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vswp		d13,d12
+	veor		q9, q9, q6
+
+	@ perform the final decryption with the last tweak value
+	vld1.8		{q0}, [r7]!
+	mov		r0, sp
+	veor		q0, q0, q9
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3			@ preserve fp
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q9
+	vst1.8		{q0}, [r8]
+
+	mov		r6, r8
+.Lxts_dec_steal:
+	ldrb		r1, [r8]
+	ldrb		r0, [r7], #1
+	strb		r1, [r8, #0x10]
+	strb		r0, [r8], #1
+
+	subs		r9, #1
+	bhi		.Lxts_dec_steal
+
+	vld1.8		{q0}, [r6]
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r6]
+	mov		r3, r4
+#endif
+
+.Lxts_dec_ret:
+	bic		r0, r3, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [r3, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_dec_bzero
+
+	mov		sp, r3
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{q8}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_decrypt,.-bsaes_xts_decrypt
+#endif
diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c
new file mode 100644
index 000000000000..4522366da759
--- /dev/null
+++ b/arch/arm/crypto/aesbs-glue.c
@@ -0,0 +1,434 @@
+/*
+ * linux/arch/arm/crypto/aesbs-glue.c - glue code for NEON bit sliced AES
+ *
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/neon.h>
+#include <crypto/aes.h>
+#include <crypto/ablk_helper.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+
+#include "aes_glue.h"
+
+#define BIT_SLICED_KEY_MAXSIZE	(128 * (AES_MAXNR - 1) + 2 * AES_BLOCK_SIZE)
+
+struct BS_KEY {
+	struct AES_KEY	rk;
+	int		converted;
+	u8 __aligned(8)	bs[BIT_SLICED_KEY_MAXSIZE];
+} __aligned(8);
+
+asmlinkage void bsaes_enc_key_convert(u8 out[], struct AES_KEY const *in);
+asmlinkage void bsaes_dec_key_convert(u8 out[], struct AES_KEY const *in);
+
+asmlinkage void bsaes_cbc_encrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 iv[]);
+
+asmlinkage void bsaes_ctr32_encrypt_blocks(u8 const in[], u8 out[], u32 blocks,
+					   struct BS_KEY *key, u8 const iv[]);
+
+asmlinkage void bsaes_xts_encrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 tweak[]);
+
+asmlinkage void bsaes_xts_decrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 tweak[]);
+
+struct aesbs_cbc_ctx {
+	struct AES_KEY	enc;
+	struct BS_KEY	dec;
+};
+
+struct aesbs_ctr_ctx {
+	struct BS_KEY	enc;
+};
+
+struct aesbs_xts_ctx {
+	struct BS_KEY	enc;
+	struct BS_KEY	dec;
+	struct AES_KEY	twkey;
+};
+
+static int aesbs_cbc_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 8;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->dec.rk = ctx->enc;
+	private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
+	ctx->dec.converted = 0;
+	return 0;
+}
+
+static int aesbs_ctr_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 8;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->enc.converted = 0;
+	return 0;
+}
+
+static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 4;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->dec.rk = ctx->enc.rk;
+	private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
+	private_AES_set_encrypt_key(in_key + key_len / 2, bits, &ctx->twkey);
+	ctx->enc.converted = ctx->dec.converted = 0;
+	return 0;
+}
+
+static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	while (walk.nbytes) {
+		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
+		u8 *src = walk.src.virt.addr;
+
+		if (walk.dst.virt.addr == walk.src.virt.addr) {
+			u8 *iv = walk.iv;
+
+			do {
+				crypto_xor(src, iv, AES_BLOCK_SIZE);
+				AES_encrypt(src, src, &ctx->enc);
+				iv = src;
+				src += AES_BLOCK_SIZE;
+			} while (--blocks);
+			memcpy(walk.iv, iv, AES_BLOCK_SIZE);
+		} else {
+			u8 *dst = walk.dst.virt.addr;
+
+			do {
+				crypto_xor(walk.iv, src, AES_BLOCK_SIZE);
+				AES_encrypt(walk.iv, dst, &ctx->enc);
+				memcpy(walk.iv, dst, AES_BLOCK_SIZE);
+				src += AES_BLOCK_SIZE;
+				dst += AES_BLOCK_SIZE;
+			} while (--blocks);
+		}
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	while ((walk.nbytes / AES_BLOCK_SIZE) >= 8) {
+		kernel_neon_begin();
+		bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->dec, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	while (walk.nbytes) {
+		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
+		u8 *dst = walk.dst.virt.addr;
+		u8 *src = walk.src.virt.addr;
+		u8 bk[2][AES_BLOCK_SIZE];
+		u8 *iv = walk.iv;
+
+		do {
+			if (walk.dst.virt.addr == walk.src.virt.addr)
+				memcpy(bk[blocks & 1], src, AES_BLOCK_SIZE);
+
+			AES_decrypt(src, dst, &ctx->dec.rk);
+			crypto_xor(dst, iv, AES_BLOCK_SIZE);
+
+			if (walk.dst.virt.addr == walk.src.virt.addr)
+				iv = bk[blocks & 1];
+			else
+				iv = src;
+
+			dst += AES_BLOCK_SIZE;
+			src += AES_BLOCK_SIZE;
+		} while (--blocks);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static void inc_be128_ctr(__be32 ctr[], u32 addend)
+{
+	int i;
+
+	for (i = 3; i >= 0; i--, addend = 1) {
+		u32 n = be32_to_cpu(ctr[i]) + addend;
+
+		ctr[i] = cpu_to_be32(n);
+		if (n >= addend)
+			break;
+	}
+}
+
+static int aesbs_ctr_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst, struct scatterlist *src,
+			     unsigned int nbytes)
+{
+	struct aesbs_ctr_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	u32 blocks;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	while ((blocks = walk.nbytes / AES_BLOCK_SIZE)) {
+		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+		__be32 *ctr = (__be32 *)walk.iv;
+		u32 headroom = UINT_MAX - be32_to_cpu(ctr[3]);
+
+		/* avoid 32 bit counter overflow in the NEON code */
+		if (unlikely(headroom < blocks)) {
+			blocks = headroom + 1;
+			tail = walk.nbytes - blocks * AES_BLOCK_SIZE;
+		}
+		kernel_neon_begin();
+		bsaes_ctr32_encrypt_blocks(walk.src.virt.addr,
+					   walk.dst.virt.addr, blocks,
+					   &ctx->enc, walk.iv);
+		kernel_neon_end();
+		inc_be128_ctr(ctr, blocks);
+
+		nbytes -= blocks * AES_BLOCK_SIZE;
+		if (nbytes && nbytes == tail && nbytes <= AES_BLOCK_SIZE)
+			break;
+
+		err = blkcipher_walk_done(desc, &walk, tail);
+	}
+	if (walk.nbytes) {
+		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
+		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+		u8 ks[AES_BLOCK_SIZE];
+
+		AES_encrypt(walk.iv, ks, &ctx->enc.rk);
+		if (tdst != tsrc)
+			memcpy(tdst, tsrc, nbytes);
+		crypto_xor(tdst, ks, nbytes);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	/* generate the initial tweak */
+	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
+
+	while (walk.nbytes) {
+		kernel_neon_begin();
+		bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->enc, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	/* generate the initial tweak */
+	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
+
+	while (walk.nbytes) {
+		kernel_neon_begin();
+		bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->dec, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static struct crypto_alg aesbs_algs[] = { {
+	.cra_name		= "__cbc-aes-neonbs",
+	.cra_driver_name	= "__driver-cbc-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesbs_cbc_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_cbc_set_key,
+		.encrypt	= aesbs_cbc_encrypt,
+		.decrypt	= aesbs_cbc_decrypt,
+	},
+}, {
+	.cra_name		= "__ctr-aes-neonbs",
+	.cra_driver_name	= "__driver-ctr-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct aesbs_ctr_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_ctr_set_key,
+		.encrypt	= aesbs_ctr_encrypt,
+		.decrypt	= aesbs_ctr_encrypt,
+	},
+}, {
+	.cra_name		= "__xts-aes-neonbs",
+	.cra_driver_name	= "__driver-xts-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesbs_xts_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+		.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_xts_set_key,
+		.encrypt	= aesbs_xts_encrypt,
+		.decrypt	= aesbs_xts_decrypt,
+	},
+}, {
+	.cra_name		= "cbc(aes)",
+	.cra_driver_name	= "cbc-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= __ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+}, {
+	.cra_name		= "ctr(aes)",
+	.cra_driver_name	= "ctr-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+}, {
+	.cra_name		= "xts(aes)",
+	.cra_driver_name	= "xts-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+		.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+} };
+
+static int __init aesbs_mod_init(void)
+{
+	if (!cpu_has_neon())
+		return -ENODEV;
+
+	return crypto_register_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
+}
+
+static void __exit aesbs_mod_exit(void)
+{
+	crypto_unregister_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
+}
+
+module_init(aesbs_mod_init);
+module_exit(aesbs_mod_exit);
+
+MODULE_DESCRIPTION("Bit sliced AES in CBC/CTR/XTS modes using NEON");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/crypto/bsaes-armv7.pl b/arch/arm/crypto/bsaes-armv7.pl
new file mode 100644
index 000000000000..f3d96d932573
--- /dev/null
+++ b/arch/arm/crypto/bsaes-armv7.pl
@@ -0,0 +1,2467 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+#
+# Specific modes and adaptation for Linux kernel by Ard Biesheuvel
+# <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is
+# granted.
+# ====================================================================
+
+# Bit-sliced AES for ARM NEON
+#
+# February 2012.
+#
+# This implementation is direct adaptation of bsaes-x86_64 module for
+# ARM NEON. Except that this module is endian-neutral [in sense that
+# it can be compiled for either endianness] by courtesy of vld1.8's
+# neutrality. Initial version doesn't implement interface to OpenSSL,
+# only low-level primitives and unsupported entry points, just enough
+# to collect performance results, which for Cortex-A8 core are:
+#
+# encrypt	19.5 cycles per byte processed with 128-bit key
+# decrypt	22.1 cycles per byte processed with 128-bit key
+# key conv.	440  cycles per 128-bit key/0.18 of 8x block
+#
+# Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7,
+# which is [much] worse than anticipated (for further details see
+# http://www.openssl.org/~appro/Snapdragon-S4.html).
+#
+# Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code
+# manages in 20.0 cycles].
+#
+# When comparing to x86_64 results keep in mind that NEON unit is
+# [mostly] single-issue and thus can't [fully] benefit from
+# instruction-level parallelism. And when comparing to aes-armv4
+# results keep in mind key schedule conversion overhead (see
+# bsaes-x86_64.pl for further details)...
+#
+#						<appro@openssl.org>
+
+# April-August 2013
+#
+# Add CBC, CTR and XTS subroutines, adapt for kernel use.
+#
+#					<ard.biesheuvel@linaro.org>
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
+my ($inp,$out,$len,$key)=("r0","r1","r2","r3");
+my @XMM=map("q$_",(0..15));
+
+{
+my ($key,$rounds,$const)=("r4","r5","r6");
+
+sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
+sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }
+
+sub Sbox {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b0, b1, b4, b6, b3, b7, b2, b5] < msb
+my @b=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+	&InBasisChange	(@b);
+	&Inv_GF256	(@b[6,5,0,3,7,1,4,2],@t,@s);
+	&OutBasisChange	(@b[7,1,4,2,6,5,0,3]);
+}
+
+sub InBasisChange {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b6, b5, b0, b3, b7, b1, b4, b2] < msb 
+my @b=@_[0..7];
+$code.=<<___;
+	veor	@b[2], @b[2], @b[1]
+	veor	@b[5], @b[5], @b[6]
+	veor	@b[3], @b[3], @b[0]
+	veor	@b[6], @b[6], @b[2]
+	veor	@b[5], @b[5], @b[0]
+
+	veor	@b[6], @b[6], @b[3]
+	veor	@b[3], @b[3], @b[7]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[3], @b[3], @b[4]
+	veor	@b[4], @b[4], @b[5]
+
+	veor	@b[2], @b[2], @b[7]
+	veor	@b[3], @b[3], @b[1]
+	veor	@b[1], @b[1], @b[5]
+___
+}
+
+sub OutBasisChange {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b6, b1, b2, b4, b7, b0, b3, b5] < msb
+my @b=@_[0..7];
+$code.=<<___;
+	veor	@b[0], @b[0], @b[6]
+	veor	@b[1], @b[1], @b[4]
+	veor	@b[4], @b[4], @b[6]
+	veor	@b[2], @b[2], @b[0]
+	veor	@b[6], @b[6], @b[1]
+
+	veor	@b[1], @b[1], @b[5]
+	veor	@b[5], @b[5], @b[3]
+	veor	@b[3], @b[3], @b[7]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[2], @b[2], @b[5]
+
+	veor	@b[4], @b[4], @b[7]
+___
+}
+
+sub InvSbox {
+# input in lsb 	> [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb	> [b0, b1, b6, b4, b2, b7, b3, b5] < msb
+my @b=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+	&InvInBasisChange	(@b);
+	&Inv_GF256		(@b[5,1,2,6,3,7,0,4],@t,@s);
+	&InvOutBasisChange	(@b[3,7,0,4,5,1,2,6]);
+}
+
+sub InvInBasisChange {		# OutBasisChange in reverse (with twist)
+my @b=@_[5,1,2,6,3,7,0,4];
+$code.=<<___
+	 veor	@b[1], @b[1], @b[7]
+	veor	@b[4], @b[4], @b[7]
+
+	veor	@b[7], @b[7], @b[5]
+	 veor	@b[1], @b[1], @b[3]
+	veor	@b[2], @b[2], @b[5]
+	veor	@b[3], @b[3], @b[7]
+
+	veor	@b[6], @b[6], @b[1]
+	veor	@b[2], @b[2], @b[0]
+	 veor	@b[5], @b[5], @b[3]
+	veor	@b[4], @b[4], @b[6]
+	veor	@b[0], @b[0], @b[6]
+	veor	@b[1], @b[1], @b[4]
+___
+}
+
+sub InvOutBasisChange {		# InBasisChange in reverse
+my @b=@_[2,5,7,3,6,1,0,4];
+$code.=<<___;
+	veor	@b[1], @b[1], @b[5]
+	veor	@b[2], @b[2], @b[7]
+
+	veor	@b[3], @b[3], @b[1]
+	veor	@b[4], @b[4], @b[5]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[3], @b[3], @b[4]
+	 veor 	@b[5], @b[5], @b[0]
+	veor	@b[3], @b[3], @b[7]
+	 veor	@b[6], @b[6], @b[2]
+	 veor	@b[2], @b[2], @b[1]
+	veor	@b[6], @b[6], @b[3]
+
+	veor	@b[3], @b[3], @b[0]
+	veor	@b[5], @b[5], @b[6]
+___
+}
+
+sub Mul_GF4 {
+#;*************************************************************
+#;* Mul_GF4: Input x0-x1,y0-y1 Output x0-x1 Temp t0 (8) *
+#;*************************************************************
+my ($x0,$x1,$y0,$y1,$t0,$t1)=@_;
+$code.=<<___;
+	veor 	$t0, $y0, $y1
+	vand	$t0, $t0, $x0
+	veor	$x0, $x0, $x1
+	vand	$t1, $x1, $y0
+	vand	$x0, $x0, $y1
+	veor	$x1, $t1, $t0
+	veor	$x0, $x0, $t1
+___
+}
+
+sub Mul_GF4_N {				# not used, see next subroutine
+# multiply and scale by N
+my ($x0,$x1,$y0,$y1,$t0)=@_;
+$code.=<<___;
+	veor	$t0, $y0, $y1
+	vand	$t0, $t0, $x0
+	veor	$x0, $x0, $x1
+	vand	$x1, $x1, $y0
+	vand	$x0, $x0, $y1
+	veor	$x1, $x1, $x0
+	veor	$x0, $x0, $t0
+___
+}
+
+sub Mul_GF4_N_GF4 {
+# interleaved Mul_GF4_N and Mul_GF4
+my ($x0,$x1,$y0,$y1,$t0,
+    $x2,$x3,$y2,$y3,$t1)=@_;
+$code.=<<___;
+	veor	$t0, $y0, $y1
+	 veor 	$t1, $y2, $y3
+	vand	$t0, $t0, $x0
+	 vand	$t1, $t1, $x2
+	veor	$x0, $x0, $x1
+	 veor	$x2, $x2, $x3
+	vand	$x1, $x1, $y0
+	 vand	$x3, $x3, $y2
+	vand	$x0, $x0, $y1
+	 vand	$x2, $x2, $y3
+	veor	$x1, $x1, $x0
+	 veor	$x2, $x2, $x3
+	veor	$x0, $x0, $t0
+	 veor	$x3, $x3, $t1
+___
+}
+sub Mul_GF16_2 {
+my @x=@_[0..7];
+my @y=@_[8..11];
+my @t=@_[12..15];
+$code.=<<___;
+	veor	@t[0], @x[0], @x[2]
+	veor	@t[1], @x[1], @x[3]
+___
+	&Mul_GF4  	(@x[0], @x[1], @y[0], @y[1], @t[2..3]);
+$code.=<<___;
+	veor	@y[0], @y[0], @y[2]
+	veor	@y[1], @y[1], @y[3]
+___
+	Mul_GF4_N_GF4	(@t[0], @t[1], @y[0], @y[1], @t[3],
+			 @x[2], @x[3], @y[2], @y[3], @t[2]);
+$code.=<<___;
+	veor	@x[0], @x[0], @t[0]
+	veor	@x[2], @x[2], @t[0]
+	veor	@x[1], @x[1], @t[1]
+	veor	@x[3], @x[3], @t[1]
+
+	veor	@t[0], @x[4], @x[6]
+	veor	@t[1], @x[5], @x[7]
+___
+	&Mul_GF4_N_GF4	(@t[0], @t[1], @y[0], @y[1], @t[3],
+			 @x[6], @x[7], @y[2], @y[3], @t[2]);
+$code.=<<___;
+	veor	@y[0], @y[0], @y[2]
+	veor	@y[1], @y[1], @y[3]
+___
+	&Mul_GF4  	(@x[4], @x[5], @y[0], @y[1], @t[2..3]);
+$code.=<<___;
+	veor	@x[4], @x[4], @t[0]
+	veor	@x[6], @x[6], @t[0]
+	veor	@x[5], @x[5], @t[1]
+	veor	@x[7], @x[7], @t[1]
+___
+}
+sub Inv_GF256 {
+#;********************************************************************
+#;* Inv_GF256: Input x0-x7 Output x0-x7 Temp t0-t3,s0-s3 (144)       *
+#;********************************************************************
+my @x=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+# direct optimizations from hardware
+$code.=<<___;
+	veor	@t[3], @x[4], @x[6]
+	veor	@t[2], @x[5], @x[7]
+	veor	@t[1], @x[1], @x[3]
+	veor	@s[1], @x[7], @x[6]
+	 vmov	@t[0], @t[2]
+	veor	@s[0], @x[0], @x[2]
+
+	vorr	@t[2], @t[2], @t[1]
+	veor	@s[3], @t[3], @t[0]
+	vand	@s[2], @t[3], @s[0]
+	vorr	@t[3], @t[3], @s[0]
+	veor	@s[0], @s[0], @t[1]
+	vand	@t[0], @t[0], @t[1]
+	veor	@t[1], @x[3], @x[2]
+	vand	@s[3], @s[3], @s[0]
+	vand	@s[1], @s[1], @t[1]
+	veor	@t[1], @x[4], @x[5]
+	veor	@s[0], @x[1], @x[0]
+	veor	@t[3], @t[3], @s[1]
+	veor	@t[2], @t[2], @s[1]
+	vand	@s[1], @t[1], @s[0]
+	vorr	@t[1], @t[1], @s[0]
+	veor	@t[3], @t[3], @s[3]
+	veor	@t[0], @t[0], @s[1]
+	veor	@t[2], @t[2], @s[2]
+	veor	@t[1], @t[1], @s[3]
+	veor	@t[0], @t[0], @s[2]
+	vand	@s[0], @x[7], @x[3]
+	veor	@t[1], @t[1], @s[2]
+	vand	@s[1], @x[6], @x[2]
+	vand	@s[2], @x[5], @x[1]
+	vorr	@s[3], @x[4], @x[0]
+	veor	@t[3], @t[3], @s[0]
+	veor	@t[1], @t[1], @s[2]
+	veor	@t[0], @t[0], @s[3]
+	veor	@t[2], @t[2], @s[1]
+
+	@ Inv_GF16 \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3
+
+	@ new smaller inversion
+
+	vand	@s[2], @t[3], @t[1]
+	vmov	@s[0], @t[0]
+
+	veor	@s[1], @t[2], @s[2]
+	veor	@s[3], @t[0], @s[2]
+	veor	@s[2], @t[0], @s[2]	@ @s[2]=@s[3]
+
+	vbsl	@s[1], @t[1], @t[0]
+	vbsl	@s[3], @t[3], @t[2]
+	veor	@t[3], @t[3], @t[2]
+
+	vbsl	@s[0], @s[1], @s[2]
+	vbsl	@t[0], @s[2], @s[1]
+
+	vand	@s[2], @s[0], @s[3]
+	veor	@t[1], @t[1], @t[0]
+
+	veor	@s[2], @s[2], @t[3]
+___
+# output in s3, s2, s1, t1
+
+# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \t2, \t3, \t0, \t1, \s0, \s1, \s2, \s3
+
+# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3
+	&Mul_GF16_2(@x,@s[3,2,1],@t[1],@s[0],@t[0,2,3]);
+
+### output msb > [x3,x2,x1,x0,x7,x6,x5,x4] < lsb
+}
+
+# AES linear components
+
+sub ShiftRows {
+my @x=@_[0..7];
+my @t=@_[8..11];
+my $mask=pop;
+$code.=<<___;
+	vldmia	$key!, {@t[0]-@t[3]}
+	veor	@t[0], @t[0], @x[0]
+	veor	@t[1], @t[1], @x[1]
+	vtbl.8	`&Dlo(@x[0])`, {@t[0]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[0])`, {@t[0]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[0]}
+	veor	@t[2], @t[2], @x[2]
+	vtbl.8	`&Dlo(@x[1])`, {@t[1]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[1])`, {@t[1]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[1]}
+	veor	@t[3], @t[3], @x[3]
+	vtbl.8	`&Dlo(@x[2])`, {@t[2]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[2])`, {@t[2]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[2]}
+	vtbl.8	`&Dlo(@x[3])`, {@t[3]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[3])`, {@t[3]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[3]}
+	veor	@t[0], @t[0], @x[4]
+	veor	@t[1], @t[1], @x[5]
+	vtbl.8	`&Dlo(@x[4])`, {@t[0]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[4])`, {@t[0]}, `&Dhi($mask)`
+	veor	@t[2], @t[2], @x[6]
+	vtbl.8	`&Dlo(@x[5])`, {@t[1]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[5])`, {@t[1]}, `&Dhi($mask)`
+	veor	@t[3], @t[3], @x[7]
+	vtbl.8	`&Dlo(@x[6])`, {@t[2]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[6])`, {@t[2]}, `&Dhi($mask)`
+	vtbl.8	`&Dlo(@x[7])`, {@t[3]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[7])`, {@t[3]}, `&Dhi($mask)`
+___
+}
+
+sub MixColumns {
+# modified to emit output in order suitable for feeding back to aesenc[last]
+my @x=@_[0..7];
+my @t=@_[8..15];
+my $inv=@_[16];	# optional
+$code.=<<___;
+	vext.8	@t[0], @x[0], @x[0], #12	@ x0 <<< 32
+	vext.8	@t[1], @x[1], @x[1], #12
+	 veor	@x[0], @x[0], @t[0]		@ x0 ^ (x0 <<< 32)
+	vext.8	@t[2], @x[2], @x[2], #12
+	 veor	@x[1], @x[1], @t[1]
+	vext.8	@t[3], @x[3], @x[3], #12
+	 veor	@x[2], @x[2], @t[2]
+	vext.8	@t[4], @x[4], @x[4], #12
+	 veor	@x[3], @x[3], @t[3]
+	vext.8	@t[5], @x[5], @x[5], #12
+	 veor	@x[4], @x[4], @t[4]
+	vext.8	@t[6], @x[6], @x[6], #12
+	 veor	@x[5], @x[5], @t[5]
+	vext.8	@t[7], @x[7], @x[7], #12
+	 veor	@x[6], @x[6], @t[6]
+
+	veor	@t[1], @t[1], @x[0]
+	 veor	@x[7], @x[7], @t[7]
+	 vext.8	@x[0], @x[0], @x[0], #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	@t[2], @t[2], @x[1]
+	veor	@t[0], @t[0], @x[7]
+	veor	@t[1], @t[1], @x[7]
+	 vext.8	@x[1], @x[1], @x[1], #8
+	veor	@t[5], @t[5], @x[4]
+	 veor	@x[0], @x[0], @t[0]
+	veor	@t[6], @t[6], @x[5]
+	 veor	@x[1], @x[1], @t[1]
+	 vext.8	@t[0], @x[4], @x[4], #8
+	veor	@t[4], @t[4], @x[3]
+	 vext.8	@t[1], @x[5], @x[5], #8
+	veor	@t[7], @t[7], @x[6]
+	 vext.8	@x[4], @x[3], @x[3], #8
+	veor	@t[3], @t[3], @x[2]
+	 vext.8	@x[5], @x[7], @x[7], #8
+	veor	@t[4], @t[4], @x[7]
+	 vext.8	@x[3], @x[6], @x[6], #8
+	veor	@t[3], @t[3], @x[7]
+	 vext.8	@x[6], @x[2], @x[2], #8
+	veor	@x[7], @t[1], @t[5]
+___
+$code.=<<___ if (!$inv);
+	veor	@x[2], @t[0], @t[4]
+	veor	@x[4], @x[4], @t[3]
+	veor	@x[5], @x[5], @t[7]
+	veor	@x[3], @x[3], @t[6]
+	 @ vmov	@x[2], @t[0]
+	veor	@x[6], @x[6], @t[2]
+	 @ vmov	@x[7], @t[1]
+___
+$code.=<<___ if ($inv);
+	veor	@t[3], @t[3], @x[4]
+	veor	@x[5], @x[5], @t[7]
+	veor	@x[2], @x[3], @t[6]
+	veor	@x[3], @t[0], @t[4]
+	veor	@x[4], @x[6], @t[2]
+	vmov	@x[6], @t[3]
+	 @ vmov	@x[7], @t[1]
+___
+}
+
+sub InvMixColumns_orig {
+my @x=@_[0..7];
+my @t=@_[8..15];
+
+$code.=<<___;
+	@ multiplication by 0x0e
+	vext.8	@t[7], @x[7], @x[7], #12
+	vmov	@t[2], @x[2]
+	veor	@x[2], @x[2], @x[5]		@ 2 5
+	veor	@x[7], @x[7], @x[5]		@ 7 5
+	vext.8	@t[0], @x[0], @x[0], #12
+	vmov	@t[5], @x[5]
+	veor	@x[5], @x[5], @x[0]		@ 5 0		[1]
+	veor	@x[0], @x[0], @x[1]		@ 0 1
+	vext.8	@t[1], @x[1], @x[1], #12
+	veor	@x[1], @x[1], @x[2]		@ 1 25
+	veor	@x[0], @x[0], @x[6]		@ 01 6		[2]
+	vext.8	@t[3], @x[3], @x[3], #12
+	veor	@x[1], @x[1], @x[3]		@ 125 3		[4]
+	veor	@x[2], @x[2], @x[0]		@ 25 016	[3]
+	veor	@x[3], @x[3], @x[7]		@ 3 75
+	veor	@x[7], @x[7], @x[6]		@ 75 6		[0]
+	vext.8	@t[6], @x[6], @x[6], #12
+	vmov	@t[4], @x[4]
+	veor	@x[6], @x[6], @x[4]		@ 6 4
+	veor	@x[4], @x[4], @x[3]		@ 4 375		[6]
+	veor	@x[3], @x[3], @x[7]		@ 375 756=36
+	veor	@x[6], @x[6], @t[5]		@ 64 5		[7]
+	veor	@x[3], @x[3], @t[2]		@ 36 2
+	vext.8	@t[5], @t[5], @t[5], #12
+	veor	@x[3], @x[3], @t[4]		@ 362 4		[5]
+___
+					my @y = @x[7,5,0,2,1,3,4,6];
+$code.=<<___;
+	@ multiplication by 0x0b
+	veor	@y[1], @y[1], @y[0]
+	veor	@y[0], @y[0], @t[0]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[1], @y[1], @t[1]
+	veor	@y[0], @y[0], @t[5]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[1], @y[1], @t[6]
+	veor	@y[0], @y[0], @t[7]
+	veor	@t[7], @t[7], @t[6]		@ clobber t[7]
+
+	veor	@y[3], @y[3], @t[0]
+	 veor	@y[1], @y[1], @y[0]
+	vext.8	@t[0], @t[0], @t[0], #12
+	veor	@y[2], @y[2], @t[1]
+	veor	@y[4], @y[4], @t[1]
+	vext.8	@t[1], @t[1], @t[1], #12
+	veor	@y[2], @y[2], @t[2]
+	veor	@y[3], @y[3], @t[2]
+	veor	@y[5], @y[5], @t[2]
+	veor	@y[2], @y[2], @t[7]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[3], @y[3], @t[3]
+	veor	@y[6], @y[6], @t[3]
+	veor	@y[4], @y[4], @t[3]
+	veor	@y[7], @y[7], @t[4]
+	vext.8	@t[3], @t[3], @t[3], #12
+	veor	@y[5], @y[5], @t[4]
+	veor	@y[7], @y[7], @t[7]
+	veor	@t[7], @t[7], @t[5]		@ clobber t[7] even more
+	veor	@y[3], @y[3], @t[5]
+	veor	@y[4], @y[4], @t[4]
+
+	veor	@y[5], @y[5], @t[7]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[6], @y[6], @t[7]
+	veor	@y[4], @y[4], @t[7]
+
+	veor	@t[7], @t[7], @t[5]
+	vext.8	@t[5], @t[5], @t[5], #12
+
+	@ multiplication by 0x0d
+	veor	@y[4], @y[4], @y[7]
+	 veor	@t[7], @t[7], @t[6]		@ restore t[7]
+	veor	@y[7], @y[7], @t[4]
+	vext.8	@t[6], @t[6], @t[6], #12
+	veor	@y[2], @y[2], @t[0]
+	veor	@y[7], @y[7], @t[5]
+	vext.8	@t[7], @t[7], @t[7], #12
+	veor	@y[2], @y[2], @t[2]
+
+	veor	@y[3], @y[3], @y[1]
+	veor	@y[1], @y[1], @t[1]
+	veor	@y[0], @y[0], @t[0]
+	veor	@y[3], @y[3], @t[0]
+	veor	@y[1], @y[1], @t[5]
+	veor	@y[0], @y[0], @t[5]
+	vext.8	@t[0], @t[0], @t[0], #12
+	veor	@y[1], @y[1], @t[7]
+	veor	@y[0], @y[0], @t[6]
+	veor	@y[3], @y[3], @y[1]
+	veor	@y[4], @y[4], @t[1]
+	vext.8	@t[1], @t[1], @t[1], #12
+
+	veor	@y[7], @y[7], @t[7]
+	veor	@y[4], @y[4], @t[2]
+	veor	@y[5], @y[5], @t[2]
+	veor	@y[2], @y[2], @t[6]
+	veor	@t[6], @t[6], @t[3]		@ clobber t[6]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[4], @y[4], @y[7]
+	veor	@y[3], @y[3], @t[6]
+
+	veor	@y[6], @y[6], @t[6]
+	veor	@y[5], @y[5], @t[5]
+	vext.8	@t[5], @t[5], @t[5], #12
+	veor	@y[6], @y[6], @t[4]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[5], @y[5], @t[6]
+	veor	@y[6], @y[6], @t[7]
+	vext.8	@t[7], @t[7], @t[7], #12
+	veor	@t[6], @t[6], @t[3]		@ restore t[6]
+	vext.8	@t[3], @t[3], @t[3], #12
+
+	@ multiplication by 0x09
+	veor	@y[4], @y[4], @y[1]
+	veor	@t[1], @t[1], @y[1]		@ t[1]=y[1]
+	veor	@t[0], @t[0], @t[5]		@ clobber t[0]
+	vext.8	@t[6], @t[6], @t[6], #12
+	veor	@t[1], @t[1], @t[5]
+	veor	@y[3], @y[3], @t[0]
+	veor	@t[0], @t[0], @y[0]		@ t[0]=y[0]
+	veor	@t[1], @t[1], @t[6]
+	veor	@t[6], @t[6], @t[7]		@ clobber t[6]
+	veor	@y[4], @y[4], @t[1]
+	veor	@y[7], @y[7], @t[4]
+	veor	@y[6], @y[6], @t[3]
+	veor	@y[5], @y[5], @t[2]
+	veor	@t[4], @t[4], @y[4]		@ t[4]=y[4]
+	veor	@t[3], @t[3], @y[3]		@ t[3]=y[3]
+	veor	@t[5], @t[5], @y[5]		@ t[5]=y[5]
+	veor	@t[2], @t[2], @y[2]		@ t[2]=y[2]
+	veor	@t[3], @t[3], @t[7]
+	veor	@XMM[5], @t[5], @t[6]
+	veor	@XMM[6], @t[6], @y[6]		@ t[6]=y[6]
+	veor	@XMM[2], @t[2], @t[6]
+	veor	@XMM[7], @t[7], @y[7]		@ t[7]=y[7]
+
+	vmov	@XMM[0], @t[0]
+	vmov	@XMM[1], @t[1]
+	@ vmov	@XMM[2], @t[2]
+	vmov	@XMM[3], @t[3]
+	vmov	@XMM[4], @t[4]
+	@ vmov	@XMM[5], @t[5]
+	@ vmov	@XMM[6], @t[6]
+	@ vmov	@XMM[7], @t[7]
+___
+}
+
+sub InvMixColumns {
+my @x=@_[0..7];
+my @t=@_[8..15];
+
+# Thanks to Jussi Kivilinna for providing pointer to
+#
+# | 0e 0b 0d 09 |   | 02 03 01 01 |   | 05 00 04 00 |
+# | 09 0e 0b 0d | = | 01 02 03 01 | x | 00 05 00 04 |
+# | 0d 09 0e 0b |   | 01 01 02 03 |   | 04 00 05 00 |
+# | 0b 0d 09 0e |   | 03 01 01 02 |   | 00 04 00 05 |
+
+$code.=<<___;
+	@ multiplication by 0x05-0x00-0x04-0x00
+	vext.8	@t[0], @x[0], @x[0], #8
+	vext.8	@t[6], @x[6], @x[6], #8
+	vext.8	@t[7], @x[7], @x[7], #8
+	veor	@t[0], @t[0], @x[0]
+	vext.8	@t[1], @x[1], @x[1], #8
+	veor	@t[6], @t[6], @x[6]
+	vext.8	@t[2], @x[2], @x[2], #8
+	veor	@t[7], @t[7], @x[7]
+	vext.8	@t[3], @x[3], @x[3], #8
+	veor	@t[1], @t[1], @x[1]
+	vext.8	@t[4], @x[4], @x[4], #8
+	veor	@t[2], @t[2], @x[2]
+	vext.8	@t[5], @x[5], @x[5], #8
+	veor	@t[3], @t[3], @x[3]
+	veor	@t[4], @t[4], @x[4]
+	veor	@t[5], @t[5], @x[5]
+
+	 veor	@x[0], @x[0], @t[6]
+	 veor	@x[1], @x[1], @t[6]
+	 veor	@x[2], @x[2], @t[0]
+	 veor	@x[4], @x[4], @t[2]
+	 veor	@x[3], @x[3], @t[1]
+	 veor	@x[1], @x[1], @t[7]
+	 veor	@x[2], @x[2], @t[7]
+	 veor	@x[4], @x[4], @t[6]
+	 veor	@x[5], @x[5], @t[3]
+	 veor	@x[3], @x[3], @t[6]
+	 veor	@x[6], @x[6], @t[4]
+	 veor	@x[4], @x[4], @t[7]
+	 veor	@x[5], @x[5], @t[7]
+	 veor	@x[7], @x[7], @t[5]
+___
+	&MixColumns	(@x,@t,1);	# flipped 2<->3 and 4<->6
+}
+
+sub swapmove {
+my ($a,$b,$n,$mask,$t)=@_;
+$code.=<<___;
+	vshr.u64	$t, $b, #$n
+	veor		$t, $t, $a
+	vand		$t, $t, $mask
+	veor		$a, $a, $t
+	vshl.u64	$t, $t, #$n
+	veor		$b, $b, $t
+___
+}
+sub swapmove2x {
+my ($a0,$b0,$a1,$b1,$n,$mask,$t0,$t1)=@_;
+$code.=<<___;
+	vshr.u64	$t0, $b0, #$n
+	 vshr.u64	$t1, $b1, #$n
+	veor		$t0, $t0, $a0
+	 veor		$t1, $t1, $a1
+	vand		$t0, $t0, $mask
+	 vand		$t1, $t1, $mask
+	veor		$a0, $a0, $t0
+	vshl.u64	$t0, $t0, #$n
+	 veor		$a1, $a1, $t1
+	 vshl.u64	$t1, $t1, #$n
+	veor		$b0, $b0, $t0
+	 veor		$b1, $b1, $t1
+___
+}
+
+sub bitslice {
+my @x=reverse(@_[0..7]);
+my ($t0,$t1,$t2,$t3)=@_[8..11];
+$code.=<<___;
+	vmov.i8	$t0,#0x55			@ compose .LBS0
+	vmov.i8	$t1,#0x33			@ compose .LBS1
+___
+	&swapmove2x(@x[0,1,2,3],1,$t0,$t2,$t3);
+	&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3);
+$code.=<<___;
+	vmov.i8	$t0,#0x0f			@ compose .LBS2
+___
+	&swapmove2x(@x[0,2,1,3],2,$t1,$t2,$t3);
+	&swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3);
+
+	&swapmove2x(@x[0,4,1,5],4,$t0,$t2,$t3);
+	&swapmove2x(@x[2,6,3,7],4,$t0,$t2,$t3);
+}
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+
+# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
+# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
+# define VFP_ABI_FRAME	0x40
+#else
+# define VFP_ABI_PUSH
+# define VFP_ABI_POP
+# define VFP_ABI_FRAME	0
+# define BSAES_ASM_EXTENDED_KEY
+# define XTS_CHAIN_TWEAK
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+#endif
+
+#ifdef __thumb__
+# define adrl adr
+#endif
+
+#if __ARM_ARCH__>=7
+.text
+.syntax	unified 	@ ARMv7-capable assembler is expected to handle this
+#ifdef __thumb2__
+.thumb
+#else
+.code   32
+#endif
+
+.fpu	neon
+
+.type	_bsaes_decrypt8,%function
+.align	4
+_bsaes_decrypt8:
+	adr	$const,_bsaes_decrypt8
+	vldmia	$key!, {@XMM[9]}		@ round 0 key
+	add	$const,$const,#.LM0ISR-_bsaes_decrypt8
+
+	vldmia	$const!, {@XMM[8]}		@ .LM0ISR
+	veor	@XMM[10], @XMM[0], @XMM[9]	@ xor with round0 key
+	veor	@XMM[11], @XMM[1], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	veor	@XMM[12], @XMM[2], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+	veor	@XMM[13], @XMM[3], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])`
+	veor	@XMM[14], @XMM[4], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])`
+	veor	@XMM[15], @XMM[5], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])`
+	veor	@XMM[10], @XMM[6], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])`
+	veor	@XMM[11], @XMM[7], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	 vtbl.8	`&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+___
+	&bitslice	(@XMM[0..7, 8..11]);
+$code.=<<___;
+	sub	$rounds,$rounds,#1
+	b	.Ldec_sbox
+.align	4
+.Ldec_loop:
+___
+	&ShiftRows	(@XMM[0..7, 8..12]);
+$code.=".Ldec_sbox:\n";
+	&InvSbox	(@XMM[0..7, 8..15]);
+$code.=<<___;
+	subs	$rounds,$rounds,#1
+	bcc	.Ldec_done
+___
+	&InvMixColumns	(@XMM[0,1,6,4,2,7,3,5, 8..15]);
+$code.=<<___;
+	vldmia	$const, {@XMM[12]}		@ .LISR
+	ite	eq				@ Thumb2 thing, sanity check in ARM
+	addeq	$const,$const,#0x10
+	bne	.Ldec_loop
+	vldmia	$const, {@XMM[12]}		@ .LISRM0
+	b	.Ldec_loop
+.align	4
+.Ldec_done:
+___
+	&bitslice	(@XMM[0,1,6,4,2,7,3,5, 8..11]);
+$code.=<<___;
+	vldmia	$key, {@XMM[8]}			@ last round key
+	veor	@XMM[6], @XMM[6], @XMM[8]
+	veor	@XMM[4], @XMM[4], @XMM[8]
+	veor	@XMM[2], @XMM[2], @XMM[8]
+	veor	@XMM[7], @XMM[7], @XMM[8]
+	veor	@XMM[3], @XMM[3], @XMM[8]
+	veor	@XMM[5], @XMM[5], @XMM[8]
+	veor	@XMM[0], @XMM[0], @XMM[8]
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	bx	lr
+.size	_bsaes_decrypt8,.-_bsaes_decrypt8
+
+.type	_bsaes_const,%object
+.align	6
+_bsaes_const:
+.LM0ISR:	@ InvShiftRows constants
+	.quad	0x0a0e0206070b0f03, 0x0004080c0d010509
+.LISR:
+	.quad	0x0504070602010003, 0x0f0e0d0c080b0a09
+.LISRM0:
+	.quad	0x01040b0e0205080f, 0x0306090c00070a0d
+.LM0SR:		@ ShiftRows constants
+	.quad	0x0a0e02060f03070b, 0x0004080c05090d01
+.LSR:
+	.quad	0x0504070600030201, 0x0f0e0d0c0a09080b
+.LSRM0:
+	.quad	0x0304090e00050a0f, 0x01060b0c0207080d
+.LM0:
+	.quad	0x02060a0e03070b0f, 0x0004080c0105090d
+.LREVM0SR:
+	.quad	0x090d01050c000408, 0x03070b0f060a0e02
+.asciz	"Bit-sliced AES for NEON, CRYPTOGAMS by <appro\@openssl.org>"
+.align	6
+.size	_bsaes_const,.-_bsaes_const
+
+.type	_bsaes_encrypt8,%function
+.align	4
+_bsaes_encrypt8:
+	adr	$const,_bsaes_encrypt8
+	vldmia	$key!, {@XMM[9]}		@ round 0 key
+	sub	$const,$const,#_bsaes_encrypt8-.LM0SR
+
+	vldmia	$const!, {@XMM[8]}		@ .LM0SR
+_bsaes_encrypt8_alt:
+	veor	@XMM[10], @XMM[0], @XMM[9]	@ xor with round0 key
+	veor	@XMM[11], @XMM[1], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	veor	@XMM[12], @XMM[2], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+	veor	@XMM[13], @XMM[3], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])`
+	veor	@XMM[14], @XMM[4], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])`
+	veor	@XMM[15], @XMM[5], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])`
+	veor	@XMM[10], @XMM[6], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])`
+	veor	@XMM[11], @XMM[7], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	 vtbl.8	`&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+_bsaes_encrypt8_bitslice:
+___
+	&bitslice	(@XMM[0..7, 8..11]);
+$code.=<<___;
+	sub	$rounds,$rounds,#1
+	b	.Lenc_sbox
+.align	4
+.Lenc_loop:
+___
+	&ShiftRows	(@XMM[0..7, 8..12]);
+$code.=".Lenc_sbox:\n";
+	&Sbox		(@XMM[0..7, 8..15]);
+$code.=<<___;
+	subs	$rounds,$rounds,#1
+	bcc	.Lenc_done
+___
+	&MixColumns	(@XMM[0,1,4,6,3,7,2,5, 8..15]);
+$code.=<<___;
+	vldmia	$const, {@XMM[12]}		@ .LSR
+	ite	eq				@ Thumb2 thing, samity check in ARM
+	addeq	$const,$const,#0x10
+	bne	.Lenc_loop
+	vldmia	$const, {@XMM[12]}		@ .LSRM0
+	b	.Lenc_loop
+.align	4
+.Lenc_done:
+___
+	# output in lsb > [t0, t1, t4, t6, t3, t7, t2, t5] < msb
+	&bitslice	(@XMM[0,1,4,6,3,7,2,5, 8..11]);
+$code.=<<___;
+	vldmia	$key, {@XMM[8]}			@ last round key
+	veor	@XMM[4], @XMM[4], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[8]
+	veor	@XMM[3], @XMM[3], @XMM[8]
+	veor	@XMM[7], @XMM[7], @XMM[8]
+	veor	@XMM[2], @XMM[2], @XMM[8]
+	veor	@XMM[5], @XMM[5], @XMM[8]
+	veor	@XMM[0], @XMM[0], @XMM[8]
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	bx	lr
+.size	_bsaes_encrypt8,.-_bsaes_encrypt8
+___
+}
+{
+my ($out,$inp,$rounds,$const)=("r12","r4","r5","r6");
+
+sub bitslice_key {
+my @x=reverse(@_[0..7]);
+my ($bs0,$bs1,$bs2,$t2,$t3)=@_[8..12];
+
+	&swapmove	(@x[0,1],1,$bs0,$t2,$t3);
+$code.=<<___;
+	@ &swapmove(@x[2,3],1,$t0,$t2,$t3);
+	vmov	@x[2], @x[0]
+	vmov	@x[3], @x[1]
+___
+	#&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3);
+
+	&swapmove2x	(@x[0,2,1,3],2,$bs1,$t2,$t3);
+$code.=<<___;
+	@ &swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3);
+	vmov	@x[4], @x[0]
+	vmov	@x[6], @x[2]
+	vmov	@x[5], @x[1]
+	vmov	@x[7], @x[3]
+___
+	&swapmove2x	(@x[0,4,1,5],4,$bs2,$t2,$t3);
+	&swapmove2x	(@x[2,6,3,7],4,$bs2,$t2,$t3);
+}
+
+$code.=<<___;
+.type	_bsaes_key_convert,%function
+.align	4
+_bsaes_key_convert:
+	adr	$const,_bsaes_key_convert
+	vld1.8	{@XMM[7]},  [$inp]!		@ load round 0 key
+	sub	$const,$const,#_bsaes_key_convert-.LM0
+	vld1.8	{@XMM[15]}, [$inp]!		@ load round 1 key
+
+	vmov.i8	@XMM[8],  #0x01			@ bit masks
+	vmov.i8	@XMM[9],  #0x02
+	vmov.i8	@XMM[10], #0x04
+	vmov.i8	@XMM[11], #0x08
+	vmov.i8	@XMM[12], #0x10
+	vmov.i8	@XMM[13], #0x20
+	vldmia	$const, {@XMM[14]}		@ .LM0
+
+#ifdef __ARMEL__
+	vrev32.8	@XMM[7],  @XMM[7]
+	vrev32.8	@XMM[15], @XMM[15]
+#endif
+	sub	$rounds,$rounds,#1
+	vstmia	$out!, {@XMM[7]}		@ save round 0 key
+	b	.Lkey_loop
+
+.align	4
+.Lkey_loop:
+	vtbl.8	`&Dlo(@XMM[7])`,{@XMM[15]},`&Dlo(@XMM[14])`
+	vtbl.8	`&Dhi(@XMM[7])`,{@XMM[15]},`&Dhi(@XMM[14])`
+	vmov.i8	@XMM[6],  #0x40
+	vmov.i8	@XMM[15], #0x80
+
+	vtst.8	@XMM[0], @XMM[7], @XMM[8]
+	vtst.8	@XMM[1], @XMM[7], @XMM[9]
+	vtst.8	@XMM[2], @XMM[7], @XMM[10]
+	vtst.8	@XMM[3], @XMM[7], @XMM[11]
+	vtst.8	@XMM[4], @XMM[7], @XMM[12]
+	vtst.8	@XMM[5], @XMM[7], @XMM[13]
+	vtst.8	@XMM[6], @XMM[7], @XMM[6]
+	vtst.8	@XMM[7], @XMM[7], @XMM[15]
+	vld1.8	{@XMM[15]}, [$inp]!		@ load next round key
+	vmvn	@XMM[0], @XMM[0]		@ "pnot"
+	vmvn	@XMM[1], @XMM[1]
+	vmvn	@XMM[5], @XMM[5]
+	vmvn	@XMM[6], @XMM[6]
+#ifdef __ARMEL__
+	vrev32.8	@XMM[15], @XMM[15]
+#endif
+	subs	$rounds,$rounds,#1
+	vstmia	$out!,{@XMM[0]-@XMM[7]}		@ write bit-sliced round key
+	bne	.Lkey_loop
+
+	vmov.i8	@XMM[7],#0x63			@ compose .L63
+	@ don't save last round key
+	bx	lr
+.size	_bsaes_key_convert,.-_bsaes_key_convert
+___
+}
+
+if (0) {		# following four functions are unsupported interface
+			# used for benchmarking...
+$code.=<<___;
+.globl	bsaes_enc_key_convert
+.type	bsaes_enc_key_convert,%function
+.align	4
+bsaes_enc_key_convert:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+
+	ldr	r5,[$inp,#240]			@ pass rounds
+	mov	r4,$inp				@ pass key
+	mov	r12,$out			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_enc_key_convert,.-bsaes_enc_key_convert
+
+.globl	bsaes_encrypt_128
+.type	bsaes_encrypt_128,%function
+.align	4
+bsaes_encrypt_128:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+.Lenc128_loop:
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+	mov	r4,$key				@ pass the key
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5,#10				@ pass rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]!
+
+	bl	_bsaes_encrypt8
+
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	subs	$len,$len,#0x80
+	vst1.8	{@XMM[5]}, [$out]!
+	bhi	.Lenc128_loop
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_encrypt_128,.-bsaes_encrypt_128
+
+.globl	bsaes_dec_key_convert
+.type	bsaes_dec_key_convert,%function
+.align	4
+bsaes_dec_key_convert:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+
+	ldr	r5,[$inp,#240]			@ pass rounds
+	mov	r4,$inp				@ pass key
+	mov	r12,$out			@ pass key schedule
+	bl	_bsaes_key_convert
+	vldmia	$out, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	$out, {@XMM[7]}
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_dec_key_convert,.-bsaes_dec_key_convert
+
+.globl	bsaes_decrypt_128
+.type	bsaes_decrypt_128,%function
+.align	4
+bsaes_decrypt_128:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+.Ldec128_loop:
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+	mov	r4,$key				@ pass the key
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5,#10				@ pass rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]!
+
+	bl	_bsaes_decrypt8
+
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	subs	$len,$len,#0x80
+	vst1.8	{@XMM[5]}, [$out]!
+	bhi	.Ldec128_loop
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_decrypt_128,.-bsaes_decrypt_128
+___
+}
+{
+my ($inp,$out,$len,$key, $ivp,$fp,$rounds)=map("r$_",(0..3,8..10));
+my ($keysched)=("sp");
+
+$code.=<<___;
+.extern AES_cbc_encrypt
+.extern AES_decrypt
+
+.global	bsaes_cbc_encrypt
+.type	bsaes_cbc_encrypt,%function
+.align	5
+bsaes_cbc_encrypt:
+#ifndef	__KERNEL__
+	cmp	$len, #128
+#ifndef	__thumb__
+	blo	AES_cbc_encrypt
+#else
+	bhs	1f
+	b	AES_cbc_encrypt
+1:
+#endif
+#endif
+
+	@ it is up to the caller to make sure we are called with enc == 0
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	$ivp, [ip]			@ IV is 1st arg on the stack
+	mov	$len, $len, lsr#4		@ len in 16 byte blocks
+	sub	sp, #0x10			@ scratch space to carry over the IV
+	mov	$fp, sp				@ save sp
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	add	r12, #`128-32`			@ sifze of bit-slices key schedule
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12				@ sp is $keysched
+	bl	_bsaes_key_convert
+	vldmia	$keysched, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	$keysched, {@XMM[7]}
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, $key, #248
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12, {@XMM[15]}			@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+
+.align	2
+0:
+#endif
+
+	vld1.8	{@XMM[15]}, [$ivp]		@ load IV
+	b	.Lcbc_dec_loop
+
+.align	4
+.Lcbc_dec_loop:
+	subs	$len, $len, #0x8
+	bmi	.Lcbc_dec_loop_finish
+
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, $keysched			@ pass the key
+#else
+	add	r4, $key, #248
+#endif
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5, $rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]
+	sub	$inp, $inp, #0x60
+	vstmia	$fp, {@XMM[15]}			@ put aside IV
+
+	bl	_bsaes_decrypt8
+
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]-@XMM[13]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[14]-@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[3], @XMM[3], @XMM[13]
+	vst1.8	{@XMM[6]}, [$out]!
+	veor	@XMM[5], @XMM[5], @XMM[14]
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	vst1.8	{@XMM[5]}, [$out]!
+
+	b	.Lcbc_dec_loop
+
+.Lcbc_dec_loop_finish:
+	adds	$len, $len, #8
+	beq	.Lcbc_dec_done
+
+	vld1.8	{@XMM[0]}, [$inp]!		@ load input
+	cmp	$len, #2
+	blo	.Lcbc_dec_one
+	vld1.8	{@XMM[1]}, [$inp]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, $keysched			@ pass the key
+#else
+	add	r4, $key, #248
+#endif
+	mov	r5, $rounds
+	vstmia	$fp, {@XMM[15]}			@ put aside IV
+	beq	.Lcbc_dec_two
+	vld1.8	{@XMM[2]}, [$inp]!
+	cmp	$len, #4
+	blo	.Lcbc_dec_three
+	vld1.8	{@XMM[3]}, [$inp]!
+	beq	.Lcbc_dec_four
+	vld1.8	{@XMM[4]}, [$inp]!
+	cmp	$len, #6
+	blo	.Lcbc_dec_five
+	vld1.8	{@XMM[5]}, [$inp]!
+	beq	.Lcbc_dec_six
+	vld1.8	{@XMM[6]}, [$inp]!
+	sub	$inp, $inp, #0x70
+
+	bl	_bsaes_decrypt8
+
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]-@XMM[13]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[3], @XMM[3], @XMM[13]
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_six:
+	sub	$inp, $inp, #0x60
+	bl	_bsaes_decrypt8
+	vldmia	$fp,{@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_five:
+	sub	$inp, $inp, #0x50
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_four:
+	sub	$inp, $inp, #0x40
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_three:
+	sub	$inp, $inp, #0x30
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_two:
+	sub	$inp, $inp, #0x20
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]}, [$inp]!		@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[15]}, [$inp]!		@ reload input
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_one:
+	sub	$inp, $inp, #0x10
+	mov	$rounds, $out			@ save original out pointer
+	mov	$out, $fp			@ use the iv scratch space as out buffer
+	mov	r2, $key
+	vmov	@XMM[4],@XMM[15]		@ just in case ensure that IV
+	vmov	@XMM[5],@XMM[0]			@ and input are preserved
+	bl	AES_decrypt
+	vld1.8	{@XMM[0]}, [$fp,:64]		@ load result
+	veor	@XMM[0], @XMM[0], @XMM[4]	@ ^= IV
+	vmov	@XMM[15], @XMM[5]		@ @XMM[5] holds input
+	vst1.8	{@XMM[0]}, [$rounds]		@ write output
+
+.Lcbc_dec_done:
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+.Lcbc_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		$keysched!, {q0-q1}
+	cmp		$keysched, $fp
+	bne		.Lcbc_dec_bzero
+#endif
+
+	mov	sp, $fp
+	add	sp, #0x10			@ add sp,$fp,#0x10 is no good for thumb
+	vst1.8	{@XMM[15]}, [$ivp]		@ return IV
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}
+.size	bsaes_cbc_encrypt,.-bsaes_cbc_encrypt
+___
+}
+{
+my ($inp,$out,$len,$key, $ctr,$fp,$rounds)=(map("r$_",(0..3,8..10)));
+my $const = "r6";	# shared with _bsaes_encrypt8_alt
+my $keysched = "sp";
+
+$code.=<<___;
+.extern	AES_encrypt
+.global	bsaes_ctr32_encrypt_blocks
+.type	bsaes_ctr32_encrypt_blocks,%function
+.align	5
+bsaes_ctr32_encrypt_blocks:
+	cmp	$len, #8			@ use plain AES for
+	blo	.Lctr_enc_short			@ small sizes
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	$ctr, [ip]			@ ctr is 1st arg on the stack
+	sub	sp, sp, #0x10			@ scratch space to carry over the ctr
+	mov	$fp, sp				@ save sp
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	add	r12, #`128-32`			@ size of bit-sliced key schedule
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12				@ sp is $keysched
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+	vld1.8	{@XMM[0]}, [$ctr]		@ load counter
+	add	$ctr, $const, #.LREVM0SR-.LM0	@ borrow $ctr
+	vldmia	$keysched, {@XMM[4]}		@ load round0 key
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+.align	2
+0:	add	r12, $key, #248
+	vld1.8	{@XMM[0]}, [$ctr]		@ load counter
+	adrl	$ctr, .LREVM0SR			@ borrow $ctr
+	vldmia	r12, {@XMM[4]}			@ load round0 key
+	sub	sp, #0x10			@ place for adjusted round0 key
+#endif
+
+	vmov.i32	@XMM[8],#1		@ compose 1<<96
+	veor		@XMM[9],@XMM[9],@XMM[9]
+	vrev32.8	@XMM[0],@XMM[0]
+	vext.8		@XMM[8],@XMM[9],@XMM[8],#4
+	vrev32.8	@XMM[4],@XMM[4]
+	vadd.u32	@XMM[9],@XMM[8],@XMM[8]	@ compose 2<<96
+	vstmia	$keysched, {@XMM[4]}		@ save adjusted round0 key
+	b	.Lctr_enc_loop
+
+.align	4
+.Lctr_enc_loop:
+	vadd.u32	@XMM[10], @XMM[8], @XMM[9]	@ compose 3<<96
+	vadd.u32	@XMM[1], @XMM[0], @XMM[8]	@ +1
+	vadd.u32	@XMM[2], @XMM[0], @XMM[9]	@ +2
+	vadd.u32	@XMM[3], @XMM[0], @XMM[10]	@ +3
+	vadd.u32	@XMM[4], @XMM[1], @XMM[10]
+	vadd.u32	@XMM[5], @XMM[2], @XMM[10]
+	vadd.u32	@XMM[6], @XMM[3], @XMM[10]
+	vadd.u32	@XMM[7], @XMM[4], @XMM[10]
+	vadd.u32	@XMM[10], @XMM[5], @XMM[10]	@ next counter
+
+	@ Borrow prologue from _bsaes_encrypt8 to use the opportunity
+	@ to flip byte order in 32-bit counter
+
+	vldmia		$keysched, {@XMM[9]}		@ load round0 key
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, $keysched, #0x10		@ pass next round key
+#else
+	add		r4, $key, #`248+16`
+#endif
+	vldmia		$ctr, {@XMM[8]}			@ .LREVM0SR
+	mov		r5, $rounds			@ pass rounds
+	vstmia		$fp, {@XMM[10]}			@ save next counter
+	sub		$const, $ctr, #.LREVM0SR-.LSR	@ pass constants
+
+	bl		_bsaes_encrypt8_alt
+
+	subs		$len, $len, #8
+	blo		.Lctr_enc_loop_done
+
+	vld1.8		{@XMM[8]-@XMM[9]}, [$inp]!	@ load input
+	vld1.8		{@XMM[10]-@XMM[11]}, [$inp]!
+	veor		@XMM[0], @XMM[8]
+	veor		@XMM[1], @XMM[9]
+	vld1.8		{@XMM[12]-@XMM[13]}, [$inp]!
+	veor		@XMM[4], @XMM[10]
+	veor		@XMM[6], @XMM[11]
+	vld1.8		{@XMM[14]-@XMM[15]}, [$inp]!
+	veor		@XMM[3], @XMM[12]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor		@XMM[7], @XMM[13]
+	veor		@XMM[2], @XMM[14]
+	vst1.8		{@XMM[4]}, [$out]!
+	veor		@XMM[5], @XMM[15]
+	vst1.8		{@XMM[6]}, [$out]!
+	vmov.i32	@XMM[8], #1			@ compose 1<<96
+	vst1.8		{@XMM[3]}, [$out]!
+	veor		@XMM[9], @XMM[9], @XMM[9]
+	vst1.8		{@XMM[7]}, [$out]!
+	vext.8		@XMM[8], @XMM[9], @XMM[8], #4
+	vst1.8		{@XMM[2]}, [$out]!
+	vadd.u32	@XMM[9],@XMM[8],@XMM[8]		@ compose 2<<96
+	vst1.8		{@XMM[5]}, [$out]!
+	vldmia		$fp, {@XMM[0]}			@ load counter
+
+	bne		.Lctr_enc_loop
+	b		.Lctr_enc_done
+
+.align	4
+.Lctr_enc_loop_done:
+	add		$len, $len, #8
+	vld1.8		{@XMM[8]}, [$inp]!	@ load input
+	veor		@XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!	@ write output
+	cmp		$len, #2
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[9]}, [$inp]!
+	veor		@XMM[1], @XMM[9]
+	vst1.8		{@XMM[1]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[10]}, [$inp]!
+	veor		@XMM[4], @XMM[10]
+	vst1.8		{@XMM[4]}, [$out]!
+	cmp		$len, #4
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[11]}, [$inp]!
+	veor		@XMM[6], @XMM[11]
+	vst1.8		{@XMM[6]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[12]}, [$inp]!
+	veor		@XMM[3], @XMM[12]
+	vst1.8		{@XMM[3]}, [$out]!
+	cmp		$len, #6
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[13]}, [$inp]!
+	veor		@XMM[7], @XMM[13]
+	vst1.8		{@XMM[7]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[14]}, [$inp]
+	veor		@XMM[2], @XMM[14]
+	vst1.8		{@XMM[2]}, [$out]!
+
+.Lctr_enc_done:
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifndef	BSAES_ASM_EXTENDED_KEY
+.Lctr_enc_bzero:			@ wipe key schedule [if any]
+	vstmia		$keysched!, {q0-q1}
+	cmp		$keysched, $fp
+	bne		.Lctr_enc_bzero
+#else
+	vstmia		$keysched, {q0-q1}
+#endif
+
+	mov	sp, $fp
+	add	sp, #0x10		@ add sp,$fp,#0x10 is no good for thumb
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}	@ return
+
+.align	4
+.Lctr_enc_short:
+	ldr	ip, [sp]		@ ctr pointer is passed on stack
+	stmdb	sp!, {r4-r8, lr}
+
+	mov	r4, $inp		@ copy arguments
+	mov	r5, $out
+	mov	r6, $len
+	mov	r7, $key
+	ldr	r8, [ip, #12]		@ load counter LSW
+	vld1.8	{@XMM[1]}, [ip]		@ load whole counter value
+#ifdef __ARMEL__
+	rev	r8, r8
+#endif
+	sub	sp, sp, #0x10
+	vst1.8	{@XMM[1]}, [sp,:64]	@ copy counter value
+	sub	sp, sp, #0x10
+
+.Lctr_enc_short_loop:
+	add	r0, sp, #0x10		@ input counter value
+	mov	r1, sp			@ output on the stack
+	mov	r2, r7			@ key
+
+	bl	AES_encrypt
+
+	vld1.8	{@XMM[0]}, [r4]!	@ load input
+	vld1.8	{@XMM[1]}, [sp,:64]	@ load encrypted counter
+	add	r8, r8, #1
+#ifdef __ARMEL__
+	rev	r0, r8
+	str	r0, [sp, #0x1c]		@ next counter value
+#else
+	str	r8, [sp, #0x1c]		@ next counter value
+#endif
+	veor	@XMM[0],@XMM[0],@XMM[1]
+	vst1.8	{@XMM[0]}, [r5]!	@ store output
+	subs	r6, r6, #1
+	bne	.Lctr_enc_short_loop
+
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+	vstmia		sp!, {q0-q1}
+
+	ldmia	sp!, {r4-r8, pc}
+.size	bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks
+___
+}
+{
+######################################################################
+# void bsaes_xts_[en|de]crypt(const char *inp,char *out,size_t len,
+#	const AES_KEY *key1, const AES_KEY *key2,
+#	const unsigned char iv[16]);
+#
+my ($inp,$out,$len,$key,$rounds,$magic,$fp)=(map("r$_",(7..10,1..3)));
+my $const="r6";		# returned by _bsaes_key_convert
+my $twmask=@XMM[5];
+my @T=@XMM[6..7];
+
+$code.=<<___;
+.globl	bsaes_xts_encrypt
+.type	bsaes_xts_encrypt,%function
+.align	4
+bsaes_xts_encrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future $fp
+
+	mov	$inp, r0
+	mov	$out, r1
+	mov	$len, r2
+	mov	$key, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0,sp				@ pointer to initial tweak
+#endif
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+	mov	$fp, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #`128-32`			@ size of bit-sliced key schedule
+	sub	r12, #`32+16`			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7], @XMM[7], @XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7], @XMM[7], @XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+
+	vld1.8	{@XMM[8]}, [r0]			@ initial tweak
+	adr	$magic, .Lxts_magic
+
+	subs	$len, #0x80
+	blo	.Lxts_enc_short
+	b	.Lxts_enc_loop
+
+.align	4
+.Lxts_enc_loop:
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	vadd.u64	@XMM[8], @XMM[15], @XMM[15]
+	vst1.64		{@XMM[15]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	veor		@XMM[8], @XMM[8], @T[0]
+	vst1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]-@XMM[7]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	veor		@XMM[7], @XMM[7], @XMM[15]
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vld1.64		{@XMM[14]-@XMM[15]}, [r0,:128]!
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[2], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	veor		@XMM[13], @XMM[5], @XMM[15]
+	vst1.8		{@XMM[12]-@XMM[13]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	subs		$len, #0x80
+	bpl		.Lxts_enc_loop
+
+.Lxts_enc_short:
+	adds		$len, #0x70
+	bmi		.Lxts_enc_done
+
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+	subs		$len, #0x10
+	bmi		.Lxts_enc_`$i-9`
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	sub		$len, #0x10
+	vst1.64		{@XMM[15]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vld1.64		{@XMM[14]}, [r0,:128]!
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[2], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	vst1.8		{@XMM[12]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_6:
+	vst1.64		{@XMM[14]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[4], @XMM[4], @XMM[12]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[5], @XMM[5], @XMM[13]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+
+@ put this in range for both ARM and Thumb mode adr instructions
+.align	5
+.Lxts_magic:
+	.quad	1, 0x87
+
+.align	5
+.Lxts_enc_5:
+	vst1.64		{@XMM[13]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[3], @XMM[3], @XMM[11]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[4], @XMM[4], @XMM[12]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	vst1.8		{@XMM[10]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_4:
+	vst1.64		{@XMM[12]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[2], @XMM[2], @XMM[10]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[3], @XMM[3], @XMM[11]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_3:
+	vst1.64		{@XMM[11]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[1], @XMM[1], @XMM[9]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[2], @XMM[2], @XMM[10]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	vld1.64		{@XMM[10]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	vst1.8		{@XMM[8]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_2:
+	vst1.64		{@XMM[10]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[0], @XMM[0], @XMM[8]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[1], @XMM[1], @XMM[9]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_1:
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp				@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!
+	mov		$fp, r4
+
+	vmov		@XMM[8], @XMM[9]		@ next round tweak
+
+.Lxts_enc_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		$len, #0x10
+	beq		.Lxts_enc_ret
+	sub		r6, $out, #0x10
+
+.Lxts_enc_steal:
+	ldrb		r0, [$inp], #1
+	ldrb		r1, [$out, #-0x10]
+	strb		r0, [$out, #-0x10]
+	strb		r1, [$out], #1
+
+	subs		$len, #1
+	bhi		.Lxts_enc_steal
+
+	vld1.8		{@XMM[0]}, [r6]
+	mov		r0, sp
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp			@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [r6]
+	mov		$fp, r4
+#endif
+
+.Lxts_enc_ret:
+	bic		r0, $fp, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [$fp, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_enc_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_enc_bzero
+
+	mov		sp, $fp
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{@XMM[8]}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_encrypt,.-bsaes_xts_encrypt
+
+.globl	bsaes_xts_decrypt
+.type	bsaes_xts_decrypt,%function
+.align	4
+bsaes_xts_decrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future $fp
+
+	mov	$inp, r0
+	mov	$out, r1
+	mov	$len, r2
+	mov	$key, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0, sp				@ pointer to initial tweak
+#endif
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+	mov	$fp, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #`128-32`			@ size of bit-sliced key schedule
+	sub	r12, #`32+16`			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, sp, #0x90
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, $key, #248
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+	vld1.8	{@XMM[8]}, [r0]			@ initial tweak
+	adr	$magic, .Lxts_magic
+
+	tst	$len, #0xf			@ if not multiple of 16
+	it	ne				@ Thumb2 thing, sanity check in ARM
+	subne	$len, #0x10			@ subtract another 16 bytes
+	subs	$len, #0x80
+
+	blo	.Lxts_dec_short
+	b	.Lxts_dec_loop
+
+.align	4
+.Lxts_dec_loop:
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	vadd.u64	@XMM[8], @XMM[15], @XMM[15]
+	vst1.64		{@XMM[15]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	veor		@XMM[8], @XMM[8], @T[0]
+	vst1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]-@XMM[7]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	veor		@XMM[7], @XMM[7], @XMM[15]
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vld1.64		{@XMM[14]-@XMM[15]}, [r0,:128]!
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[3], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	veor		@XMM[13], @XMM[5], @XMM[15]
+	vst1.8		{@XMM[12]-@XMM[13]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	subs		$len, #0x80
+	bpl		.Lxts_dec_loop
+
+.Lxts_dec_short:
+	adds		$len, #0x70
+	bmi		.Lxts_dec_done
+
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+	subs		$len, #0x10
+	bmi		.Lxts_dec_`$i-9`
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	sub		$len, #0x10
+	vst1.64		{@XMM[15]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vld1.64		{@XMM[14]}, [r0,:128]!
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[3], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	vst1.8		{@XMM[12]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_6:
+	vst1.64		{@XMM[14]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[4], @XMM[4], @XMM[12]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[5], @XMM[5], @XMM[13]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_5:
+	vst1.64		{@XMM[13]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[3], @XMM[3], @XMM[11]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[4], @XMM[4], @XMM[12]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	vst1.8		{@XMM[10]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_4:
+	vst1.64		{@XMM[12]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[2], @XMM[2], @XMM[10]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[3], @XMM[3], @XMM[11]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_3:
+	vst1.64		{@XMM[11]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[1], @XMM[1], @XMM[9]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[2], @XMM[2], @XMM[10]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	vld1.64		{@XMM[10]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	vst1.8		{@XMM[8]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_2:
+	vst1.64		{@XMM[10]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[0], @XMM[0], @XMM[8]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[1], @XMM[1], @XMM[9]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_1:
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp				@ preserve fp
+	mov		r5, $magic			@ preserve magic
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!
+	mov		$fp, r4
+	mov		$magic, r5
+
+	vmov		@XMM[8], @XMM[9]		@ next round tweak
+
+.Lxts_dec_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		$len, #0x10
+	beq		.Lxts_dec_ret
+
+	@ calculate one round of extra tweak for the stolen ciphertext
+	vldmia		$magic, {$twmask}
+	vshr.s64	@XMM[6], @XMM[8], #63
+	vand		@XMM[6], @XMM[6], $twmask
+	vadd.u64	@XMM[9], @XMM[8], @XMM[8]
+	vswp		`&Dhi("@XMM[6]")`,`&Dlo("@XMM[6]")`
+	veor		@XMM[9], @XMM[9], @XMM[6]
+
+	@ perform the final decryption with the last tweak value
+	vld1.8		{@XMM[0]}, [$inp]!
+	mov		r0, sp
+	veor		@XMM[0], @XMM[0], @XMM[9]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp			@ preserve fp
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[9]
+	vst1.8		{@XMM[0]}, [$out]
+
+	mov		r6, $out
+.Lxts_dec_steal:
+	ldrb		r1, [$out]
+	ldrb		r0, [$inp], #1
+	strb		r1, [$out, #0x10]
+	strb		r0, [$out], #1
+
+	subs		$len, #1
+	bhi		.Lxts_dec_steal
+
+	vld1.8		{@XMM[0]}, [r6]
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [r6]
+	mov		$fp, r4
+#endif
+
+.Lxts_dec_ret:
+	bic		r0, $fp, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [$fp, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_dec_bzero
+
+	mov		sp, $fp
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{@XMM[8]}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_decrypt,.-bsaes_xts_decrypt
+___
+}
+$code.=<<___;
+#endif
+___
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+open SELF,$0;
+while(<SELF>) {
+	next if (/^#!/);
+        last if (!s/^#/@/ and !/^$/);
+        print;
+}
+close SELF;
+
+print $code;
+
+close STDOUT;
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index d3db39860b9c..c38b58c80202 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -24,6 +24,7 @@ generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
 generic-y += siginfo.h
+generic-y += simd.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += sockios.h
@@ -31,5 +32,5 @@ generic-y += termbits.h
 generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
-generic-y += types.h
 generic-y += unaligned.h
+generic-y += preempt.h
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 5665134bfa3e..0704e0cf5571 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -87,17 +87,43 @@ static inline u64 arch_counter_get_cntvct(void)
 	return cval;
 }
 
-static inline void arch_counter_set_user_access(void)
+static inline u32 arch_timer_get_cntkctl(void)
 {
 	u32 cntkctl;
-
 	asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl));
+	return cntkctl;
+}
 
-	/* disable user access to everything */
-	cntkctl &= ~((3 << 8) | (7 << 0));
-
+static inline void arch_timer_set_cntkctl(u32 cntkctl)
+{
 	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
 }
+
+static inline void arch_counter_set_user_access(void)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+
+	/* Disable user access to both physical/virtual counters/timers */
+	/* Also disable virtual event stream */
+	cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+			| ARCH_TIMER_USR_VT_ACCESS_EN
+			| ARCH_TIMER_VIRT_EVT_EN
+			| ARCH_TIMER_USR_VCT_ACCESS_EN
+			| ARCH_TIMER_USR_PCT_ACCESS_EN);
+	arch_timer_set_cntkctl(cntkctl);
+}
+
+static inline void arch_timer_evtstrm_enable(int divider)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+	cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+	/* Set the divider and enable virtual event stream */
+	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+			| ARCH_TIMER_VIRT_EVT_EN;
+	arch_timer_set_cntkctl(cntkctl);
+	elf_hwcap |= HWCAP_EVTSTRM;
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index fcc1b5bf6979..5c2285160575 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -53,6 +53,13 @@
 #define put_byte_3      lsl #0
 #endif
 
+/* Select code for any configuration running in BE8 mode */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ARM_BE8(code...) code
+#else
+#define ARM_BE8(code...)
+#endif
+
 /*
  * Data preload for architectures that support it
  */
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index da1c77d39327..62d2cb53b069 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -12,6 +12,7 @@
 #define __ASM_ARM_ATOMIC_H
 
 #include <linux/compiler.h>
+#include <linux/prefetch.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 #include <asm/barrier.h>
@@ -41,6 +42,7 @@ static inline void atomic_add(int i, atomic_t *v)
 	unsigned long tmp;
 	int result;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic_add\n"
 "1:	ldrex	%0, [%3]\n"
 "	add	%0, %0, %4\n"
@@ -79,6 +81,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 	unsigned long tmp;
 	int result;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic_sub\n"
 "1:	ldrex	%0, [%3]\n"
 "	sub	%0, %0, %4\n"
@@ -114,7 +117,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
-	unsigned long oldval, res;
+	int oldval;
+	unsigned long res;
 
 	smp_mb();
 
@@ -134,21 +138,6 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	return oldval;
 }
 
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%3]\n"
-"	bic	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
-	: "r" (addr), "Ir" (mask)
-	: "cc");
-}
-
 #else /* ARM_ARCH_6 */
 
 #ifdef CONFIG_SMP
@@ -197,15 +186,6 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return ret;
 }
 
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	*addr &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
 #endif /* __LINUX_ARM_ARCH__ */
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
@@ -238,15 +218,15 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifndef CONFIG_GENERIC_ATOMIC64
 typedef struct {
-	u64 __aligned(8) counter;
+	long long counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(i) { (i) }
 
 #ifdef CONFIG_ARM_LPAE
-static inline u64 atomic64_read(const atomic64_t *v)
+static inline long long atomic64_read(const atomic64_t *v)
 {
-	u64 result;
+	long long result;
 
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrd	%0, %H0, [%1]"
@@ -257,7 +237,7 @@ static inline u64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, u64 i)
+static inline void atomic64_set(atomic64_t *v, long long i)
 {
 	__asm__ __volatile__("@ atomic64_set\n"
 "	strd	%2, %H2, [%1]"
@@ -266,9 +246,9 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 	);
 }
 #else
-static inline u64 atomic64_read(const atomic64_t *v)
+static inline long long atomic64_read(const atomic64_t *v)
 {
-	u64 result;
+	long long result;
 
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
@@ -279,10 +259,11 @@ static inline u64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, u64 i)
+static inline void atomic64_set(atomic64_t *v, long long i)
 {
-	u64 tmp;
+	long long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_set\n"
 "1:	ldrexd	%0, %H0, [%2]\n"
 "	strexd	%0, %3, %H3, [%2]\n"
@@ -294,15 +275,16 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 }
 #endif
 
-static inline void atomic64_add(u64 i, atomic64_t *v)
+static inline void atomic64_add(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_add\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -311,17 +293,17 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 	: "cc");
 }
 
-static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -334,15 +316,16 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_sub(u64 i, atomic64_t *v)
+static inline void atomic64_sub(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_sub\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -351,17 +334,17 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 	: "cc");
 }
 
-static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -374,9 +357,10 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
 	return result;
 }
 
-static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old,
+					long long new)
 {
-	u64 oldval;
+	long long oldval;
 	unsigned long res;
 
 	smp_mb();
@@ -398,9 +382,9 @@ static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
 	return oldval;
 }
 
-static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
@@ -419,18 +403,18 @@ static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
 	return result;
 }
 
-static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, #1\n"
-"	sbc	%H0, %H0, #0\n"
-"	teq	%H0, #0\n"
+"	subs	%Q0, %Q0, #1\n"
+"	sbc	%R0, %R0, #0\n"
+"	teq	%R0, #0\n"
 "	bmi	2f\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
@@ -445,9 +429,9 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
 	return result;
 }
 
-static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
-	u64 val;
+	long long val;
 	unsigned long tmp;
 	int ret = 1;
 
@@ -459,8 +443,8 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
 "	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %6\n"
-"	adc	%H0, %H0, %H6\n"
+"	adds	%Q0, %Q0, %Q6\n"
+"	adc	%R0, %R0, %R6\n"
 "	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
diff --git a/arch/arm/include/asm/bL_switcher.h b/arch/arm/include/asm/bL_switcher.h
new file mode 100644
index 000000000000..1714800fa113
--- /dev/null
+++ b/arch/arm/include/asm/bL_switcher.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/include/asm/bL_switcher.h
+ *
+ * Created by:  Nicolas Pitre, April 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_BL_SWITCHER_H
+#define ASM_BL_SWITCHER_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+typedef void (*bL_switch_completion_handler)(void *cookie);
+
+int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
+			 bL_switch_completion_handler completer,
+			 void *completer_cookie);
+static inline int bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)
+{
+	return bL_switch_request_cb(cpu, new_cluster_id, NULL, NULL);
+}
+
+/*
+ * Register here to be notified about runtime enabling/disabling of
+ * the switcher.
+ *
+ * The notifier chain is called with the switcher activation lock held:
+ * the switcher will not be enabled or disabled during callbacks.
+ * Callbacks must not call bL_switcher_{get,put}_enabled().
+ */
+#define BL_NOTIFY_PRE_ENABLE	0
+#define BL_NOTIFY_POST_ENABLE	1
+#define BL_NOTIFY_PRE_DISABLE	2
+#define BL_NOTIFY_POST_DISABLE	3
+
+#ifdef CONFIG_BL_SWITCHER
+
+int bL_switcher_register_notifier(struct notifier_block *nb);
+int bL_switcher_unregister_notifier(struct notifier_block *nb);
+
+/*
+ * Use these functions to temporarily prevent enabling/disabling of
+ * the switcher.
+ * bL_switcher_get_enabled() returns true if the switcher is currently
+ * enabled.  Each call to bL_switcher_get_enabled() must be followed
+ * by a call to bL_switcher_put_enabled().  These functions are not
+ * recursive.
+ */
+bool bL_switcher_get_enabled(void);
+void bL_switcher_put_enabled(void);
+
+int bL_switcher_trace_trigger(void);
+int bL_switcher_get_logical_index(u32 mpidr);
+
+#else
+static inline int bL_switcher_register_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int bL_switcher_unregister_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline bool bL_switcher_get_enabled(void) { return false; }
+static inline void bL_switcher_put_enabled(void) { }
+static inline int bL_switcher_trace_trigger(void) { return 0; }
+static inline int bL_switcher_get_logical_index(u32 mpidr) { return -EUNATCH; }
+#endif /* CONFIG_BL_SWITCHER */
+
+#endif
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 7af5c6c3653a..b274bde24905 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -2,6 +2,8 @@
 #define _ASMARM_BUG_H
 
 #include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_BUG
 
@@ -12,10 +14,10 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 #define BUG_INSTR_VALUE 0xde02
-#define BUG_INSTR_TYPE ".hword "
+#define BUG_INSTR(__value) __inst_thumb16(__value)
 #else
 #define BUG_INSTR_VALUE 0xe7f001f2
-#define BUG_INSTR_TYPE ".word "
+#define BUG_INSTR(__value) __inst_arm(__value)
 #endif
 
 
@@ -33,7 +35,7 @@
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
+	asm volatile("1:\t" BUG_INSTR(__value) "\n"  \
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
@@ -48,7 +50,7 @@ do {								\
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile(BUG_INSTR_TYPE #__value);			\
+	asm volatile(BUG_INSTR(__value) "\n");			\
 	unreachable();						\
 } while (0)
 #endif  /* CONFIG_DEBUG_BUGVERBOSE */
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 15f2d5bf8875..ee753f1749cd 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -435,4 +435,50 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 #define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr))
 #define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr))
 
+/*
+ * Disabling cache access for one CPU in an ARMv7 SMP system is tricky.
+ * To do so we must:
+ *
+ * - Clear the SCTLR.C bit to prevent further cache allocations
+ * - Flush the desired level of cache
+ * - Clear the ACTLR "SMP" bit to disable local coherency
+ *
+ * ... and so without any intervening memory access in between those steps,
+ * not even to the stack.
+ *
+ * WARNING -- After this has been called:
+ *
+ * - No ldrex/strex (and similar) instructions must be used.
+ * - The CPU is obviously no longer coherent with the other CPUs.
+ * - This is unlikely to work as expected if Linux is running non-secure.
+ *
+ * Note:
+ *
+ * - This is known to apply to several ARMv7 processor implementations,
+ *   however some exceptions may exist.  Caveat emptor.
+ *
+ * - The clobber list is dictated by the call to v7_flush_dcache_*.
+ *   fp is preserved to the stack explicitly prior disabling the cache
+ *   since adding it to the clobber list is incompatible with having
+ *   CONFIG_FRAME_POINTER=y.  ip is saved as well if ever r12-clobbering
+ *   trampoline are inserted by the linker and to keep sp 64-bit aligned.
+ */
+#define v7_exit_coherency_flush(level) \
+	asm volatile( \
+	"stmfd	sp!, {fp, ip} \n\t" \
+	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
+	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \
+	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
+	"isb	\n\t" \
+	"bl	v7_flush_dcache_"__stringify(level)" \n\t" \
+	"clrex	\n\t" \
+	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR \n\t" \
+	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
+	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
+	"isb	\n\t" \
+	"dsb	\n\t" \
+	"ldmfd	sp!, {fp, ip}" \
+	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
+	      "r9","r10","lr","memory" )
+
 #endif
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 4f009c10540d..df2fbba7efc8 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -223,6 +223,42 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	return ret;
 }
 
+static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	unsigned long long oldval;
+	unsigned long res;
+
+	__asm__ __volatile__(
+"1:	ldrexd		%1, %H1, [%3]\n"
+"	teq		%1, %4\n"
+"	teqeq		%H1, %H4\n"
+"	bne		2f\n"
+"	strexd		%0, %5, %H5, [%3]\n"
+"	teq		%0, #0\n"
+"	bne		1b\n"
+"2:"
+	: "=&r" (res), "=&r" (oldval), "+Qo" (*ptr)
+	: "r" (ptr), "r" (old), "r" (new)
+	: "cc");
+
+	return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr,
+						unsigned long long old,
+						unsigned long long new)
+{
+	unsigned long long ret;
+
+	smp_mb();
+	ret = __cmpxchg64(ptr, old, new);
+	smp_mb();
+
+	return ret;
+}
+
 #define cmpxchg_local(ptr,o,n)						\
 	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
 				       (unsigned long)(o),		\
@@ -230,18 +266,16 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 				       sizeof(*(ptr))))
 
 #define cmpxchg64(ptr, o, n)						\
-	((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr),	\
-						atomic64_t,		\
-						counter),		\
-					      (unsigned long long)(o),	\
-					      (unsigned long long)(n)))
-
-#define cmpxchg64_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr),	\
-						local64_t,		\
-						a),			\
-					     (unsigned long long)(o),	\
-					     (unsigned long long)(n)))
+	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
+					(unsigned long long)(o),	\
+					(unsigned long long)(n)))
+
+#define cmpxchg64_relaxed(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
+					(unsigned long long)(o),	\
+					(unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr, o, n)	cmpxchg64_relaxed((ptr), (o), (n))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 9672e978d50d..acdde76b39bb 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -10,6 +10,7 @@
 #define CPUID_TLBTYPE	3
 #define CPUID_MPUIR	4
 #define CPUID_MPIDR	5
+#define CPUID_REVIDR	6
 
 #ifdef CONFIG_CPU_V7M
 #define CPUID_EXT_PFR0	0x40
diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h
index e072bb2ba1b1..4f8e9e5514b1 100644
--- a/arch/arm/include/asm/dma-contiguous.h
+++ b/arch/arm/include/asm/dma-contiguous.h
@@ -5,7 +5,6 @@
 #ifdef CONFIG_DMA_CMA
 
 #include <linux/types.h>
-#include <asm-generic/dma-contiguous.h>
 
 void dma_contiguous_early_fixup(phys_addr_t base, unsigned long size);
 
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 5b579b951503..e701a4d9aa59 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -11,17 +11,28 @@
 #include <asm-generic/dma-coherent.h>
 #include <asm/memory.h>
 
+#include <xen/xen.h>
+#include <asm/xen/hypervisor.h>
+
 #define DMA_ERROR_CODE	(~0)
 extern struct dma_map_ops arm_dma_ops;
 extern struct dma_map_ops arm_coherent_dma_ops;
 
-static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
 {
 	if (dev && dev->archdata.dma_ops)
 		return dev->archdata.dma_ops;
 	return &arm_dma_ops;
 }
 
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	if (xen_initial_domain())
+		return xen_dma_ops;
+	else
+		return __generic_dma_ops(dev);
+}
+
 static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 {
 	BUG_ON(!dev);
@@ -64,6 +75,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 {
 	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
 }
+
 #else
 static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
@@ -86,6 +98,46 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 }
 #endif
 
+/* The ARM override for dma_max_pfn() */
+static inline unsigned long dma_max_pfn(struct device *dev)
+{
+	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+}
+#define dma_max_pfn(dev) dma_max_pfn(dev)
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	unsigned int offset = paddr & ~PAGE_MASK;
+	return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
+{
+	unsigned int offset = dev_addr & ~PAGE_MASK;
+	return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset;
+}
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	u64 limit, mask;
+
+	if (!dev->dma_mask)
+		return 0;
+
+	mask = *dev->dma_mask;
+
+	limit = (mask + 1) & ~mask;
+	if (limit && size > limit)
+		return 0;
+
+	if ((addr | (addr + size - 1)) & ~mask)
+		return 0;
+
+	return 1;
+}
+
+static inline void dma_mark_clean(void *addr, size_t size) { }
+
 /*
  * DMA errors are defined by all-bits-set in the DMA address.
  */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 56211f2084ef..f4b46d39b9cf 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -19,8 +19,6 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct user_fp elf_fpregset_t;
 
-#define EM_ARM	40
-
 #define EF_ARM_EABI_MASK	0xff000000
 #define EF_ARM_EABI_UNKNOWN	0x00000000
 #define EF_ARM_EABI_VER1	0x01000000
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 2740c2a2df63..fe3ea776dc34 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	6
+#define NR_IPI	8
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
index 0cf7a6b842ff..ad774f37c47c 100644
--- a/arch/arm/include/asm/hardware/coresight.h
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -24,8 +24,8 @@
 #define TRACER_TIMEOUT 10000
 
 #define etm_writel(t, v, x) \
-	(__raw_writel((v), (t)->etm_regs + (x)))
-#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+	(writel_relaxed((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (readl_relaxed((t)->etm_regs + (x)))
 
 /* CoreSight Management Registers */
 #define CSMR_LOCKACCESS 0xfb0
@@ -142,8 +142,8 @@
 #define ETBFF_TRIGFL		BIT(10)
 
 #define etb_writel(t, v, x) \
-	(__raw_writel((v), (t)->etb_regs + (x)))
-#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+	(writel_relaxed((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (readl_relaxed((t)->etb_regs + (x)))
 
 #define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
 #define etm_unlock(t) \
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
deleted file mode 100644
index 9eda7dc92ad8..000000000000
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS	8
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (gpio > IOP3XX_N_GPIOS)
-		return __gpio_get_value(gpio);
-
-	return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio > IOP3XX_N_GPIOS) {
-		__gpio_set_value(gpio, value);
-		return;
-	}
-	gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (gpio < IOP3XX_N_GPIOS)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
-#endif
-
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 423744bf18eb..2594a95ff19a 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -18,16 +18,9 @@
 /*
  * IOP3XX GPIO handling
  */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
 #define IOP3XX_GPIO_LINE(x)	(x)
 
 #ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int  gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
 extern int init_atu;
 extern int iop3xx_get_init_atu(void);
 #endif
@@ -168,11 +161,6 @@ extern int iop3xx_get_init_atu(void);
 /* PERCR0 DOESN'T EXIST - index from 1! */
 #define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
 
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
 /* Timers  */
 #define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
 #define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index d070741b2b37..3c597c222ef2 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -24,9 +24,11 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <linux/blk_types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
 #include <asm-generic/pci_iomap.h>
+#include <xen/xen.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -372,6 +374,13 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define BIOVEC_MERGEABLE(vec1, vec2)	\
 	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
 
+struct bio_vec;
+extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1,
+				      const struct bio_vec *vec2);
+#define BIOVEC_PHYS_MERGEABLE(vec1, vec2)				\
+	(__BIOVEC_PHYS_MERGEABLE(vec1, vec2) &&				\
+	 (!xen_domain() || xen_biovec_phys_mergeable(vec1, vec2)))
+
 #ifdef CONFIG_MMU
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index bfc198c75913..863c892b4aaa 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -16,7 +16,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 48066ce9ea34..0a9d5dd93294 100644
--- a/arch/arm/include/asm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
@@ -11,6 +11,7 @@
 #define __ARM_KGDB_H__
 
 #include <linux/ptrace.h>
+#include <asm/opcodes.h>
 
 /*
  * GDB assumes that we're a user process being debugged, so
@@ -41,7 +42,7 @@
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm(".word 0xe7ffdeff");
+	asm(__inst_arm(0xe7ffdeff));
 }
 
 extern void kgdb_handle_bus_error(void);
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
index 64e96960de29..1d3153c7eb41 100644
--- a/arch/arm/include/asm/kvm_arm.h
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -57,6 +57,7 @@
  * TSC:		Trap SMC
  * TSW:		Trap cache operations by set/way
  * TWI:		Trap WFI
+ * TWE:		Trap WFE
  * TIDCP:	Trap L2CTLR/L2ECTLR
  * BSU_IS:	Upgrade barriers to the inner shareable domain
  * FB:		Force broadcast of all maintainance operations
@@ -67,7 +68,7 @@
  */
 #define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
 			HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
-			HCR_SWIO | HCR_TIDCP)
+			HCR_TWE | HCR_SWIO | HCR_TIDCP)
 #define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
 
 /* System Control Register (SCTLR) bits */
@@ -95,12 +96,12 @@
 #define TTBCR_IRGN1	(3 << 24)
 #define TTBCR_EPD1	(1 << 23)
 #define TTBCR_A1	(1 << 22)
-#define TTBCR_T1SZ	(3 << 16)
+#define TTBCR_T1SZ	(7 << 16)
 #define TTBCR_SH0	(3 << 12)
 #define TTBCR_ORGN0	(3 << 10)
 #define TTBCR_IRGN0	(3 << 8)
 #define TTBCR_EPD0	(1 << 7)
-#define TTBCR_T0SZ	3
+#define TTBCR_T0SZ	(7 << 0)
 #define HTCR_MASK	(TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0)
 
 /* Hyp System Trap Register */
@@ -208,6 +209,8 @@
 #define HSR_EC_DABT	(0x24)
 #define HSR_EC_DABT_HYP	(0x25)
 
+#define HSR_WFI_IS_WFE		(1U << 0)
+
 #define HSR_HVC_IMM_MASK	((1UL << 16) - 1)
 
 #define HSR_DABT_S1PTW		(1U << 7)
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index a2f43ddcc300..661da11f76f4 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -39,7 +39,7 @@
 #define c6_IFAR		17	/* Instruction Fault Address Register */
 #define c7_PAR		18	/* Physical Address Register */
 #define c7_PAR_high	19	/* PAR top 32 bits */
-#define c9_L2CTLR	20	/* Cortex A15 L2 Control Register */
+#define c9_L2CTLR	20	/* Cortex A15/A7 L2 Control Register */
 #define c10_PRRR	21	/* Primary Region Remap Register */
 #define c10_NMRR	22	/* Normal Memory Remap Register */
 #define c12_VBAR	23	/* Vector Base Address Register */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index a464e8d7b6c5..0fa90c962ac8 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -157,4 +157,55 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK;
 }
 
+static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.cp15[c0_MPIDR];
+}
+
+static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
+{
+	*vcpu_cpsr(vcpu) |= PSR_E_BIT;
+}
+
+static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu)
+{
+	return !!(*vcpu_cpsr(vcpu) & PSR_E_BIT);
+}
+
+static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu,
+						    unsigned long data,
+						    unsigned int len)
+{
+	if (kvm_vcpu_is_be(vcpu)) {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return be16_to_cpu(data & 0xffff);
+		default:
+			return be32_to_cpu(data);
+		}
+	}
+
+	return data;		/* Leave LE untouched */
+}
+
+static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu,
+						    unsigned long data,
+						    unsigned int len)
+{
+	if (kvm_vcpu_is_be(vcpu)) {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return cpu_to_be16(data & 0xffff);
+		default:
+			return cpu_to_be32(data);
+		}
+	}
+
+	return data;		/* Leave LE untouched */
+}
+
 #endif /* __ARM_KVM_EMULATE_H__ */
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 7d22517d8071..8a6f6db14ee4 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -38,11 +38,6 @@
 
 #define KVM_VCPU_MAX_FEATURES 1
 
-/* We don't currently support large pages. */
-#define KVM_HPAGE_GFN_SHIFT(x)	0
-#define KVM_NR_PAGE_SIZES	1
-#define KVM_PAGES_PER_HPAGE(x)	(1UL<<31)
-
 #include <kvm/arm_vgic.h>
 
 struct kvm_vcpu;
@@ -154,6 +149,7 @@ struct kvm_vcpu_stat {
 struct kvm_vcpu_init;
 int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 			const struct kvm_vcpu_init *init);
+int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
 int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
 struct kvm_one_reg;
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 9b28c41f4ba9..77de4a41cc50 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -62,6 +62,12 @@ phys_addr_t kvm_get_idmap_vector(void);
 int kvm_mmu_init(void);
 void kvm_clear_hyp_idmap(void);
 
+static inline void kvm_set_pmd(pmd_t *pmd, pmd_t new_pmd)
+{
+	*pmd = new_pmd;
+	flush_pmd_entry(pmd);
+}
+
 static inline void kvm_set_pte(pte_t *pte, pte_t new_pte)
 {
 	*pte = new_pte;
@@ -103,9 +109,15 @@ static inline void kvm_set_s2pte_writable(pte_t *pte)
 	pte_val(*pte) |= L_PTE_S2_RDWR;
 }
 
+static inline void kvm_set_s2pmd_writable(pmd_t *pmd)
+{
+	pmd_val(*pmd) |= L_PMD_S2_RDWR;
+}
+
 struct kvm;
 
-static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
+static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva,
+					      unsigned long size)
 {
 	/*
 	 * If we are going to insert an instruction page and the icache is
@@ -120,8 +132,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
 	 * need any kind of flushing (DDI 0406C.b - Page B3-1392).
 	 */
 	if (icache_is_pipt()) {
-		unsigned long hva = gfn_to_hva(kvm, gfn);
-		__cpuc_coherent_user_range(hva, hva + PAGE_SIZE);
+		__cpuc_coherent_user_range(hva, hva + size);
 	} else if (!icache_is_vivt_asid_tagged()) {
 		/* any kind of VIPT cache */
 		__flush_icache_all();
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
deleted file mode 100644
index f77ffc1eb0c2..000000000000
--- a/arch/arm/include/asm/localtimer.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  arch/arm/include/asm/localtimer.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_LOCALTIMER_H
-#define __ASM_ARM_LOCALTIMER_H
-
-#include <linux/errno.h>
-
-struct clock_event_device;
-
-struct local_timer_ops {
-	int  (*setup)(struct clock_event_device *);
-	void (*stop)(struct clock_event_device *);
-};
-
-#ifdef CONFIG_LOCAL_TIMERS
-/*
- * Register a local timer driver
- */
-int local_timer_register(struct local_timer_ops *);
-#else
-static inline int local_timer_register(struct local_timer_ops *ops)
-{
-	return -ENXIO;
-}
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 69b879ac0289..17a3fa2979e8 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -35,7 +35,7 @@ struct machine_desc {
 	unsigned int		nr_irqs;	/* number of IRQs */
 
 #ifdef CONFIG_ZONE_DMA
-	unsigned long		dma_zone_size;	/* size of DMA-able area */
+	phys_addr_t		dma_zone_size;	/* size of DMA-able area */
 #endif
 
 	unsigned int		video_start;	/* start of video RAM	*/
@@ -49,6 +49,7 @@ struct machine_desc {
 	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
+	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index a1c90d7feb0e..7fc42784becb 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -36,6 +36,8 @@ struct hw_pci {
 					  resource_size_t start,
 					  resource_size_t size,
 					  resource_size_t align);
+	void		(*add_bus)(struct pci_bus *bus);
+	void		(*remove_bus)(struct pci_bus *bus);
 };
 
 /*
@@ -63,6 +65,8 @@ struct pci_sys_data {
 					  resource_size_t start,
 					  resource_size_t size,
 					  resource_size_t align);
+	void		(*add_bus)(struct pci_bus *bus);
+	void		(*remove_bus)(struct pci_bus *bus);
 	void		*private_data;	/* platform controller private data	*/
 };
 
@@ -102,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
 #endif /* __ASM_MACH_PCI_H */
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 0f7b7620e9a5..608516ebabfe 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -42,6 +42,14 @@ extern void mcpm_entry_point(void);
 void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr);
 
 /*
+ * This sets an early poke i.e a value to be poked into some address
+ * from very early assembly code before the CPU is ungated.  The
+ * address must be physical, and if 0 then nothing will happen.
+ */
+void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
+			 unsigned long poke_phys_addr, unsigned long poke_val);
+
+/*
  * CPU/cluster power operations API for higher subsystems to use.
  */
 
@@ -76,12 +84,45 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
+ *
+ * On success, the CPU is not guaranteed to be truly halted until
+ * mcpm_cpu_power_down_finish() subsequently returns non-zero for the
+ * specified cpu.  Until then, other CPUs should make sure they do not
+ * trash memory the target CPU might be executing/accessing.
  */
 void mcpm_cpu_power_down(void);
 
 /**
+ * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and
+ *	make sure it is powered off
+ *
+ * @cpu: CPU number within given cluster
+ * @cluster: cluster number for the CPU
+ *
+ * Call this function to ensure that a pending powerdown has taken
+ * effect and the CPU is safely parked before performing non-mcpm
+ * operations that may affect the CPU (such as kexec trashing the
+ * kernel text).
+ *
+ * It is *not* necessary to call this function if you only need to
+ * serialise a pending powerdown with mcpm_cpu_power_up() or a wakeup
+ * event.
+ *
+ * Do not call this function unless the specified CPU has already
+ * called mcpm_cpu_power_down() or has committed to doing so.
+ *
+ * @return:
+ *	- zero if the CPU is in a safely parked state
+ *	- nonzero otherwise (e.g., timeout)
+ */
+int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster);
+
+/**
  * mcpm_cpu_suspend - bring the calling CPU in a suspended state
  *
  * @expected_residency: duration in microseconds the CPU is expected
@@ -98,8 +139,11 @@ void mcpm_cpu_power_down(void);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
  */
 void mcpm_cpu_suspend(u64 expected_residency);
 
@@ -120,6 +164,7 @@ int mcpm_cpu_powered_up(void);
 struct mcpm_platform_ops {
 	int (*power_up)(unsigned int cpu, unsigned int cluster);
 	void (*power_down)(void);
+	int (*power_down_finish)(unsigned int cpu, unsigned int cluster);
 	void (*suspend)(u64);
 	void (*powered_up)(void);
 };
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e750a938fd3c..4dd21457ef9d 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -172,8 +172,13 @@
  * so that all we need to do is modify the 8-bit constant field.
  */
 #define __PV_BITS_31_24	0x81000000
+#define __PV_BITS_7_0	0x81
+
+extern u64 __pv_phys_offset;
+extern u64 __pv_offset;
+extern void fixup_pv_table(const void *, unsigned long);
+extern const void *__pv_table_begin, *__pv_table_end;
 
-extern unsigned long __pv_phys_offset;
 #define PHYS_OFFSET __pv_phys_offset
 
 #define __pv_stub(from,to,instr,type)			\
@@ -185,22 +190,58 @@ extern unsigned long __pv_phys_offset;
 	: "=r" (to)					\
 	: "r" (from), "I" (type))
 
-static inline unsigned long __virt_to_phys(unsigned long x)
+#define __pv_stub_mov_hi(t)				\
+	__asm__ volatile("@ __pv_stub_mov\n"		\
+	"1:	mov	%R0, %1\n"			\
+	"	.pushsection .pv_table,\"a\"\n"		\
+	"	.long	1b\n"				\
+	"	.popsection\n"				\
+	: "=r" (t)					\
+	: "I" (__PV_BITS_7_0))
+
+#define __pv_add_carry_stub(x, y)			\
+	__asm__ volatile("@ __pv_add_carry_stub\n"	\
+	"1:	adds	%Q0, %1, %2\n"			\
+	"	adc	%R0, %R0, #0\n"			\
+	"	.pushsection .pv_table,\"a\"\n"		\
+	"	.long	1b\n"				\
+	"	.popsection\n"				\
+	: "+r" (y)					\
+	: "r" (x), "I" (__PV_BITS_31_24)		\
+	: "cc")
+
+static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
-	unsigned long t;
-	__pv_stub(x, t, "add", __PV_BITS_31_24);
+	phys_addr_t t;
+
+	if (sizeof(phys_addr_t) == 4) {
+		__pv_stub(x, t, "add", __PV_BITS_31_24);
+	} else {
+		__pv_stub_mov_hi(t);
+		__pv_add_carry_stub(x, t);
+	}
 	return t;
 }
 
-static inline unsigned long __phys_to_virt(unsigned long x)
+static inline unsigned long __phys_to_virt(phys_addr_t x)
 {
 	unsigned long t;
 	__pv_stub(x, t, "sub", __PV_BITS_31_24);
 	return t;
 }
+
 #else
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+
+static inline phys_addr_t __virt_to_phys(unsigned long x)
+{
+	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+static inline unsigned long __phys_to_virt(phys_addr_t x)
+{
+	return x - PHYS_OFFSET + PAGE_OFFSET;
+}
+
 #endif
 #endif
 #endif /* __ASSEMBLY__ */
@@ -238,16 +279,33 @@ static inline phys_addr_t virt_to_phys(const volatile void *x)
 
 static inline void *phys_to_virt(phys_addr_t x)
 {
-	return (void *)(__phys_to_virt((unsigned long)(x)));
+	return (void *)__phys_to_virt(x);
 }
 
 /*
  * Drivers should NOT use these either.
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
+extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
+
+/*
+ * These are for systems that have a hardware interconnect supported alias of
+ * physical memory for idmap purposes.  Most cases should leave these
+ * untouched.
+ */
+static inline phys_addr_t __virt_to_idmap(unsigned long x)
+{
+	if (arch_virt_to_idmap)
+		return arch_virt_to_idmap(x);
+	else
+		return __virt_to_phys(x);
+}
+
+#define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
+
 /*
  * Virtual <-> DMA view memory address translations
  * Again, these are *only* valid on the kernel direct mapped RAM
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 6f18da09668b..64fd15159b7d 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -16,7 +16,7 @@ typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID_BITS	8
 #define ASID_MASK	((~0ULL) << ASID_BITS)
-#define ASID(mm)	((mm)->context.id.counter & ~ASID_MASK)
+#define ASID(mm)	((unsigned int)((mm)->context.id.counter & ~ASID_MASK))
 #else
 #define ASID(mm)	(0)
 #endif
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 12f71a190422..f94784f0e3a6 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -37,10 +37,10 @@ struct outer_cache_fns {
 	void (*resume)(void);
 };
 
-#ifdef CONFIG_OUTER_CACHE
-
 extern struct outer_cache_fns outer_cache;
 
+#ifdef CONFIG_OUTER_CACHE
+
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 943504f53f57..78a779361682 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -102,12 +102,14 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 #else
 	pte = alloc_pages(PGALLOC_GFP, 0);
 #endif
-	if (pte) {
-		if (!PageHighMem(pte))
-			clean_pte_table(page_address(pte));
-		pgtable_page_ctor(pte);
+	if (!pte)
+		return NULL;
+	if (!PageHighMem(pte))
+		clean_pte_table(page_address(pte));
+	if (!pgtable_page_ctor(pte)) {
+		__free_page(pte);
+		return NULL;
 	}
-
 	return pte;
 }
 
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index f97ee02386ee..86a659a19526 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -181,6 +181,13 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
+/*
+ * We don't have huge page support for short descriptors, for the moment
+ * define empty stubs for use by pin_page_for_write.
+ */
+#define pmd_hugewillfault(pmd)	(0)
+#define pmd_thp_or_huge(pmd)	(0)
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 5689c18c85f5..4f9503908dca 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -126,6 +126,8 @@
 #define L_PTE_S2_RDONLY		 (_AT(pteval_t, 1) << 6)   /* HAP[1]   */
 #define L_PTE_S2_RDWR		 (_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
 
+#define L_PMD_S2_RDWR		 (_AT(pmdval_t, 3) << 6)   /* HAP[2:1] */
+
 /*
  * Hyp-mode PL2 PTE definitions for LPAE.
  */
@@ -206,6 +208,9 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		(!(pmd_val(pmd) & PMD_SECT_RDONLY))
 
+#define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
+#define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
 #define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 413f3876341c..c3d5fc124a05 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/unified.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
@@ -87,6 +88,17 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
 #define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
 
+#ifdef CONFIG_SMP
+#define __ALT_SMP_ASM(smp, up)						\
+	"9998:	" smp "\n"						\
+	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
+	"	.long	9998b\n"					\
+	"	" up "\n"						\
+	"	.popsection\n"
+#else
+#define __ALT_SMP_ASM(smp, up)	up
+#endif
+
 /*
  * Prefetching support - only ARMv5.
  */
@@ -97,17 +109,22 @@ static inline void prefetch(const void *ptr)
 {
 	__asm__ __volatile__(
 		"pld\t%a0"
-		:
-		: "p" (ptr)
-		: "cc");
+		:: "p" (ptr));
 }
 
+#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 #define ARCH_HAS_PREFETCHW
-#define prefetchw(ptr)	prefetch(ptr)
-
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) do { } while (0)
-
+static inline void prefetchw(const void *ptr)
+{
+	__asm__ __volatile__(
+		".arch_extension	mp\n"
+		__ALT_SMP_ASM(
+			WASM(pldw)		"\t%a0",
+			WASM(pld)		"\t%a0"
+		)
+		:: "p" (ptr));
+}
+#endif
 #endif
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index 4a2985e21969..b681575ad3de 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -11,8 +11,6 @@
 #ifndef __ASMARM_PROM_H
 #define __ASMARM_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #ifdef CONFIG_OF
 
 extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
deleted file mode 100644
index 2389b71a8e7c..000000000000
--- a/arch/arm/include/asm/sched_clock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* You shouldn't include this file. Use linux/sched_clock.h instead.
- * Temporary file until all asm/sched_clock.h users are gone
- */
-#include <linux/sched_clock.h>
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index c50f05609501..8d6a089dfb76 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -49,7 +49,7 @@ extern struct meminfo meminfo;
 #define bank_phys_end(bank)	((bank)->start + (bank)->size)
 #define bank_phys_size(bank)	(bank)->size
 
-extern int arm_add_memory(phys_addr_t start, phys_addr_t size);
+extern int arm_add_memory(u64 start, u64 size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index a8cae71caceb..22a3b9b5d4a1 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -84,6 +84,8 @@ extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
 
+extern int register_ipi_completion(struct completion *completion, int cpu);
+
 struct smp_operations {
 #ifdef CONFIG_SMP
 	/*
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 4f2c28060c9a..ef3c6072aa45 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -5,21 +5,13 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#include <asm/processor.h>
+#include <linux/prefetch.h>
 
 /*
  * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
  * extensions, so when running on UP, we have to patch these instructions away.
  */
-#define ALT_SMP(smp, up)					\
-	"9998:	" smp "\n"					\
-	"	.pushsection \".alt.smp.init\", \"a\"\n"	\
-	"	.long	9998b\n"				\
-	"	" up "\n"					\
-	"	.popsection\n"
-
 #ifdef CONFIG_THUMB2_KERNEL
-#define SEV		ALT_SMP("sev.w", "nop.w")
 /*
  * For Thumb-2, special care is needed to ensure that the conditional WFE
  * instruction really does assemble to exactly 4 bytes (as required by
@@ -31,17 +23,18 @@
  * the assembler won't change IT instructions which are explicitly present
  * in the input.
  */
-#define WFE(cond)	ALT_SMP(		\
+#define WFE(cond)	__ALT_SMP_ASM(		\
 	"it " cond "\n\t"			\
 	"wfe" cond ".n",			\
 						\
 	"nop.w"					\
 )
 #else
-#define SEV		ALT_SMP("sev", "nop")
-#define WFE(cond)	ALT_SMP("wfe" cond, "nop")
+#define WFE(cond)	__ALT_SMP_ASM("wfe" cond, "nop")
 #endif
 
+#define SEV		__ALT_SMP_ASM(WASM(sev), WASM(nop))
+
 static inline void dsb_sev(void)
 {
 #if __LINUX_ARM_ARCH__ >= 7
@@ -77,6 +70,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	u32 newval;
 	arch_spinlock_t lockval;
 
+	prefetchw(&lock->slock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%3]\n"
 "	add	%1, %0, %4\n"
@@ -100,6 +94,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 	unsigned long contended, res;
 	u32 slock;
 
+	prefetchw(&lock->slock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%3]\n"
@@ -127,10 +122,14 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 	dsb_sev();
 }
 
+static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.tickets.owner == lock.tickets.next;
+}
+
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
-	struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
-	return tickets.owner != tickets.next;
+	return !arch_spin_value_unlocked(ACCESS_ONCE(*lock));
 }
 
 static inline int arch_spin_is_contended(arch_spinlock_t *lock)
@@ -152,6 +151,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp;
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
@@ -170,6 +170,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
 	unsigned long contended, res;
 
+	prefetchw(&rw->lock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%2]\n"
@@ -203,7 +204,7 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 }
 
 /* write_can_lock - would write_trylock() succeed? */
-#define arch_write_can_lock(x)		((x)->lock == 0)
+#define arch_write_can_lock(x)		(ACCESS_ONCE((x)->lock) == 0)
 
 /*
  * Read locks are a bit more hairy:
@@ -221,6 +222,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp, tmp2;
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%2]\n"
 "	adds	%0, %0, #1\n"
@@ -241,6 +243,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 	smp_mb();
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%2]\n"
 "	sub	%0, %0, #1\n"
@@ -259,6 +262,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
 	unsigned long contended, res;
 
+	prefetchw(&rw->lock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%2]\n"
@@ -280,7 +284,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 }
 
 /* read_can_lock - would read_trylock() succeed? */
-#define arch_read_can_lock(x)		((x)->lock < 0x80000000)
+#define arch_read_can_lock(x)		(ACCESS_ONCE((x)->lock) < 0x80000000)
 
 #define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
 #define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index b262d2f8b478..47663fcb10ad 100644
--- a/arch/arm/include/asm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -25,7 +25,7 @@ typedef struct {
 #define __ARCH_SPIN_LOCK_UNLOCKED	{ { 0 } }
 
 typedef struct {
-	volatile unsigned int lock;
+	u32 lock;
 } arch_rwlock_t;
 
 #define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index f1d96d4e8092..73ddd7239b33 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -57,6 +57,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -81,6 +84,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 38960264040c..def9e570199f 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -560,37 +560,6 @@ static inline void __flush_bp_all(void)
 		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero));
 }
 
-#include <asm/cputype.h>
-#ifdef CONFIG_ARM_ERRATA_798181
-static inline int erratum_a15_798181(void)
-{
-	unsigned int midr = read_cpuid_id();
-
-	/* Cortex-A15 r0p0..r3p2 affected */
-	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
-		return 0;
-	return 1;
-}
-
-static inline void dummy_flush_tlb_a15_erratum(void)
-{
-	/*
-	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
-	 */
-	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
-	dsb(ish);
-}
-#else
-static inline int erratum_a15_798181(void)
-{
-	return 0;
-}
-
-static inline void dummy_flush_tlb_a15_erratum(void)
-{
-}
-#endif
-
 /*
  *	flush_pmd_entry
  *
@@ -697,4 +666,21 @@ extern void flush_bp_all(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARM_ERRATA_798181
+extern void erratum_a15_798181_init(void);
+#else
+static inline void erratum_a15_798181_init(void) {}
+#endif
+extern bool (*erratum_a15_798181_handler)(void);
+
+static inline bool erratum_a15_798181(void)
+{
+	if (unlikely(IS_ENABLED(CONFIG_ARM_ERRATA_798181) &&
+		erratum_a15_798181_handler))
+		return erratum_a15_798181_handler();
+	return false;
+}
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7e1f76027f66..72abdc541f38 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -19,6 +19,13 @@
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+#include <asm-generic/uaccess-unaligned.h>
+#else
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+#endif
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index f5989f46b4d2..b88beaba6b4a 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -38,6 +38,8 @@
 #ifdef __ASSEMBLY__
 #define W(instr)	instr.w
 #define BSYM(sym)	sym + 1
+#else
+#define WASM(instr)	#instr ".w"
 #endif
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -50,6 +52,8 @@
 #ifdef __ASSEMBLY__
 #define W(instr)	instr
 #define BSYM(sym)	sym
+#else
+#define WASM(instr)	#instr
 #endif
 
 #endif	/* CONFIG_THUMB2_KERNEL */
diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h
index d7ab99a0c9eb..1317ee40f4df 100644
--- a/arch/arm/include/asm/xen/hypervisor.h
+++ b/arch/arm/include/asm/xen/hypervisor.h
@@ -16,4 +16,6 @@ static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	return PARAVIRT_LAZY_NONE;
 }
 
+extern struct dma_map_ops *xen_dma_ops;
+
 #endif /* _ASM_ARM_XEN_HYPERVISOR_H */
diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h
new file mode 100644
index 000000000000..1109017499e5
--- /dev/null
+++ b/arch/arm/include/asm/xen/page-coherent.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_ARM_XEN_PAGE_COHERENT_H
+#define _ASM_ARM_XEN_PAGE_COHERENT_H
+
+#include <asm/page.h>
+#include <linux/dma-attrs.h>
+#include <linux/dma-mapping.h>
+
+static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flags,
+		struct dma_attrs *attrs)
+{
+	return __generic_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs);
+}
+
+static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
+		void *cpu_addr, dma_addr_t dma_handle,
+		struct dma_attrs *attrs)
+{
+	__generic_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir,
+	     struct dma_attrs *attrs)
+{
+	__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
+}
+
+static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+{
+	if (__generic_dma_ops(hwdev)->unmap_page)
+		__generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
+}
+
+static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (__generic_dma_ops(hwdev)->sync_single_for_cpu)
+		__generic_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (__generic_dma_ops(hwdev)->sync_single_for_device)
+		__generic_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
+}
+#endif /* _ASM_ARM_XEN_PAGE_COHERENT_H */
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 359a7b50b158..75579a9d6f76 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -6,12 +6,12 @@
 
 #include <linux/pfn.h>
 #include <linux/types.h>
+#include <linux/dma-mapping.h>
 
+#include <xen/xen.h>
 #include <xen/interface/grant_table.h>
 
-#define pfn_to_mfn(pfn)			(pfn)
 #define phys_to_machine_mapping_valid(pfn) (1)
-#define mfn_to_pfn(mfn)			(mfn)
 #define mfn_to_virt(m)			(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
 #define pte_mfn	    pte_pfn
@@ -32,6 +32,38 @@ typedef struct xpaddr {
 
 #define INVALID_P2M_ENTRY      (~0UL)
 
+unsigned long __pfn_to_mfn(unsigned long pfn);
+unsigned long __mfn_to_pfn(unsigned long mfn);
+extern struct rb_root phys_to_mach;
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	unsigned long mfn;
+
+	if (phys_to_mach.rb_node != NULL) {
+		mfn = __pfn_to_mfn(pfn);
+		if (mfn != INVALID_P2M_ENTRY)
+			return mfn;
+	}
+
+	return pfn;
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	unsigned long pfn;
+
+	if (phys_to_mach.rb_node != NULL) {
+		pfn = __mfn_to_pfn(mfn);
+		if (pfn != INVALID_P2M_ENTRY)
+			return pfn;
+	}
+
+	return mfn;
+}
+
+#define mfn_to_local_pfn(mfn) mfn_to_pfn(mfn)
+
 static inline xmaddr_t phys_to_machine(xpaddr_t phys)
 {
 	unsigned offset = phys.paddr & ~PAGE_MASK;
@@ -76,11 +108,9 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte)
 	return 0;
 }
 
-static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
-{
-	BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
-	return true;
-}
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool __set_phys_to_machine_multi(unsigned long pfn, unsigned long mfn,
+		unsigned long nr_pages);
 
 static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 {
diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S
new file mode 100644
index 000000000000..2265a199280c
--- /dev/null
+++ b/arch/arm/include/debug/efm32.S
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define UARTn_CMD		0x000c
+#define UARTn_CMD_TXEN			0x0004
+
+#define	UARTn_STATUS		0x0010
+#define	UARTn_STATUS_TXC		0x0020
+#define	UARTn_STATUS_TXBL		0x0040
+
+#define	UARTn_TXDATA		0x0034
+
+		.macro	addruart, rx, tmp
+		ldr	\rx, =(CONFIG_DEBUG_UART_PHYS)
+
+		/*
+		 * enable TX. The driver might disable it to save energy. We
+		 * don't care about disabling at the end as during debug power
+		 * consumption isn't that important.
+		 */
+		ldr	\tmp, =(UARTn_CMD_TXEN)
+		str	\tmp, [\rx, #UARTn_CMD]
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UARTn_TXDATA]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXBL
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXC
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/include/debug/msm.S
index 0e05f88abcd5..9d653d475903 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,8 +15,41 @@
  *
  */
 
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART3_PHYS        0xA9C00000
+#elif defined(CONFIG_ARCH_MSM7X30)
+#define MSM_UART1_PHYS        0xACA00000
+#define MSM_UART2_PHYS        0xACB00000
+#define MSM_UART3_PHYS        0xACC00000
+#endif
+
+#if defined(CONFIG_DEBUG_MSM_UART1)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART2)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART3)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
+#endif
+
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE	0xF0040000
+#define MSM_DEBUG_UART_PHYS	0x19C40000
+#endif
+
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE	0xF0040000
+#define MSM_DEBUG_UART_PHYS	0x16440000
+#endif
+
+#ifdef CONFIG_DEBUG_MSM8974_UART
+#define MSM_DEBUG_UART_BASE	0xFA71E000
+#define MSM_DEBUG_UART_PHYS	0xF991E000
+#endif
 
 	.macro	addruart, rp, rv, tmp
 #ifdef MSM_DEBUG_UART_PHYS
diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S
index 37c6895b87e6..92ef808a2337 100644
--- a/arch/arm/include/debug/pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@@ -25,12 +25,14 @@
 
 		.macro	waituart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_TXFF
 		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_BUSY
 		bne	1001b
 		.endm
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
new file mode 100644
index 000000000000..ba12cc44b2cb
--- /dev/null
+++ b/arch/arm/include/debug/vf.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =0x40028000	@ physical
+	ldr	\rv, =0xfe028000	@ virtual
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #0x7]	@ Data Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrb	\rd, [\rx, #0x4]	@ Status Register 1
+	tst	\rd, #1 << 6		@ TC
+	beq	1001b			@ wait until transmit done
+	.endm
+
+	.macro	waituart,rd,rx
+	.endm
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 18d76fd5a2af..70a1c9da30ca 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -7,6 +7,7 @@ header-y += hwcap.h
 header-y += ioctls.h
 header-y += kvm_para.h
 header-y += mman.h
+header-y += perf_regs.h
 header-y += posix_types.h
 header-y += ptrace.h
 header-y += setup.h
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index 6d34d080372a..7dcc10d67253 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -26,5 +26,6 @@
 #define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 #define HWCAP_LPAE	(1 << 20)
+#define HWCAP_EVTSTRM	(1 << 21)
 
 #endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index c1ee007523d7..c498b60c0505 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -63,7 +63,8 @@ struct kvm_regs {
 
 /* Supported Processor Types */
 #define KVM_ARM_TARGET_CORTEX_A15	0
-#define KVM_ARM_NUM_TARGETS		1
+#define KVM_ARM_TARGET_CORTEX_A7	1
+#define KVM_ARM_NUM_TARGETS		2
 
 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
 #define KVM_ARM_DEVICE_TYPE_SHIFT	0
diff --git a/arch/arm/include/uapi/asm/perf_regs.h b/arch/arm/include/uapi/asm/perf_regs.h
new file mode 100644
index 000000000000..ce59448458b2
--- /dev/null
+++ b/arch/arm/include/uapi/asm/perf_regs.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_ARM_PERF_REGS_H
+#define _ASM_ARM_PERF_REGS_H
+
+enum perf_event_arm_regs {
+	PERF_REG_ARM_R0,
+	PERF_REG_ARM_R1,
+	PERF_REG_ARM_R2,
+	PERF_REG_ARM_R3,
+	PERF_REG_ARM_R4,
+	PERF_REG_ARM_R5,
+	PERF_REG_ARM_R6,
+	PERF_REG_ARM_R7,
+	PERF_REG_ARM_R8,
+	PERF_REG_ARM_R9,
+	PERF_REG_ARM_R10,
+	PERF_REG_ARM_FP,
+	PERF_REG_ARM_IP,
+	PERF_REG_ARM_SP,
+	PERF_REG_ARM_LR,
+	PERF_REG_ARM_PC,
+	PERF_REG_ARM_MAX,
+};
+#endif /* _ASM_ARM_PERF_REGS_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5140df5f23aa..a30fc9be9e9e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,8 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y		:= elf.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o \
-		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
+		   setup.o signal.o sigreturn_codes.o \
+		   stacktrace.o sys_arm.o time.o traps.o
 
 obj-$(CONFIG_ATAGS)		+= atags_parse.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
@@ -78,6 +79,7 @@ obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index 221f07b11ccb..1791f12c180b 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/sched_clock.h>
 
 #include <asm/delay.h>
 
@@ -22,13 +21,6 @@ static unsigned long arch_timer_read_counter_long(void)
 	return arch_timer_read_counter();
 }
 
-static u32 sched_clock_mult __read_mostly;
-
-static unsigned long long notrace arch_timer_sched_clock(void)
-{
-	return arch_timer_read_counter() * sched_clock_mult;
-}
-
 static struct delay_timer arch_delay_timer;
 
 static void __init arch_timer_delay_timer_register(void)
@@ -48,11 +40,5 @@ int __init arch_timer_arch_init(void)
 
 	arch_timer_delay_timer_register();
 
-	/* Cache the sched_clock multiplier to save a divide in the hot path. */
-	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
-	sched_clock_func = arch_timer_sched_clock;
-	pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
-		arch_timer_rate / 1000, sched_clock_mult);
-
 	return 0;
 }
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 60d3b738d420..1f031ddd0667 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -155,4 +155,5 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
 
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 EXPORT_SYMBOL(__pv_phys_offset);
+EXPORT_SYMBOL(__pv_offset);
 #endif
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 88e14d74b6de..317da88ae65b 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	if (sys->add_bus)
+		sys->add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	if (sys->remove_bus)
+		sys->remove_bus(bus);
+}
+
 /*
  * Swizzle the device pin each time we cross a bridge.  If a platform does
  * not provide a swizzle function, we perform the standard PCI swizzling.
@@ -464,6 +478,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
 		sys->align_resource = hw->align_resource;
+		sys->add_bus = hw->add_bus;
+		sys->remove_bus = hw->remove_bus;
 		INIT_LIST_HEAD(&sys->resources);
 
 		if (hw->private_data)
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index f35906b3d8c9..739c3dfc1da2 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -174,6 +174,19 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 	return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu);
 }
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt_phys: physical address of dt blob
@@ -183,11 +196,7 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
  */
 const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
-	struct boot_param_header *devtree;
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
 
 #ifdef CONFIG_ARCH_MULTIPLATFORM
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
@@ -196,32 +205,20 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys)
+	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
 		return NULL;
 
-	devtree = phys_to_virt(dt_phys);
+	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
 
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
-		return NULL;
-
-	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
+	if (!mdesc) {
 		const char *prop;
 		long size;
+		unsigned long dt_root;
 
 		early_print("\nError: unrecognized/unsupported "
 			    "device tree compatible list:\n[ ");
 
+		dt_root = of_get_flat_dt_root();
 		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
 		while (size > 0) {
 			early_print("'%s' ", prop);
@@ -233,22 +230,8 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		dump_machine_table(); /* does not return */
 	}
 
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
 	/* Change machine number to match the mdesc we're using */
-	__machine_arch_type = mdesc_best->nr;
+	__machine_arch_type = mdesc->nr;
 
-	return mdesc_best;
+	return mdesc;
 }
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9cbe70c8b0ef..b3fb8c9e1ff2 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -192,6 +192,7 @@ __dabt_svc:
 	svc_entry
 	mov	r2, sp
 	dabt_helper
+ THUMB(	ldr	r5, [sp, #S_PSR]	)	@ potentially updated CPSR
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
@@ -416,9 +417,8 @@ __und_usr:
 	bne	__und_usr_thumb
 	sub	r4, r2, #4			@ ARM instr at LR - 4
 1:	ldrt	r0, [r4]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r0, r0				@ little endian instruction
-#endif
+ ARM_BE8(rev	r0, r0)				@ little endian instruction
+
 	@ r0 = 32-bit ARM instruction which caused the exception
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 74ad15d1a065..a2dcafdf1bc8 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -393,9 +393,7 @@ ENTRY(vector_swi)
 #else
  USER(	ldr	r10, [lr, #-4]		)	@ get SWI instruction
 #endif
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r10, r10			@ little endian instruction
-#endif
+ ARM_BE8(rev	r10, r10)			@ little endian instruction
 
 #elif defined(CONFIG_AEABI)
 
@@ -442,10 +440,10 @@ local_restart:
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
-	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
+2:	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
 	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
 	bcs	arm_syscall
-2:	mov	why, #0				@ no longer a real syscall
+	mov	why, #0				@ no longer a real syscall
 	b	sys_ni_syscall			@ not private func
 
 #if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index de23a9beed13..39f89fbd5111 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -329,10 +329,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_exit
+	bl	context_tracking_user_exit
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_exit
+	bl	context_tracking_user_exit
 	.endif
 #endif
 	.endm
@@ -341,10 +341,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_enter
+	bl	context_tracking_user_enter
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_enter
+	bl	context_tracking_user_enter
 	.endif
 #endif
 	.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 2c7cc1e03473..7801866e626a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -77,6 +77,7 @@
 
 	__HEAD
 ENTRY(stext)
+ ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
  THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
@@ -352,6 +353,9 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
+
+ ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+
 #ifdef CONFIG_ARM_VIRT_EXT
 	bl	__hyp_stub_install_secondary
 #endif
@@ -487,7 +491,26 @@ __fixup_smp:
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
 	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
 	teq	r0, #0x80000000		@ not part of a uniprocessor system?
-	moveq	pc, lr			@ yes, assume SMP
+	bne    __fixup_smp_on_up	@ no, assume UP
+
+	@ Core indicates it is SMP. Check for Aegis SOC where a single
+	@ Cortex-A9 CPU is present but SMP operations fault.
+	mov	r4, #0x41000000
+	orr	r4, r4, #0x0000c000
+	orr	r4, r4, #0x00000090
+	teq	r3, r4			@ Check for ARM Cortex-A9
+	movne	pc, lr			@ Not ARM Cortex-A9,
+
+	@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
+	@ below address check will need to be #ifdef'd or equivalent
+	@ for the Aegis platform.
+	mrc	p15, 4, r0, c15, c0	@ get SCU base address
+	teq	r0, #0x0		@ '0' on actual UP A9 hardware
+	beq	__fixup_smp_on_up	@ So its an A9 UP
+	ldr	r0, [r0, #4]		@ read SCU Config
+	and	r0, r0, #0x3		@ number of CPUs
+	teq	r0, #0x0		@ is 1?
+	movne	pc, lr
 
 __fixup_smp_on_up:
 	adr	r0, 1f
@@ -536,6 +559,14 @@ ENTRY(fixup_smp)
 	ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(fixup_smp)
 
+#ifdef __ARMEB__
+#define LOW_OFFSET	0x4
+#define HIGH_OFFSET	0x0
+#else
+#define LOW_OFFSET	0x0
+#define HIGH_OFFSET	0x4
+#endif
+
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 
 /* __fixup_pv_table - patch the stub instructions with the delta between
@@ -546,17 +577,20 @@ ENDPROC(fixup_smp)
 	__HEAD
 __fixup_pv_table:
 	adr	r0, 1f
-	ldmia	r0, {r3-r5, r7}
-	sub	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
+	ldmia	r0, {r3-r7}
+	mvn	ip, #0
+	subs	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
 	add	r4, r4, r3	@ adjust table start address
 	add	r5, r5, r3	@ adjust table end address
-	add	r7, r7, r3	@ adjust __pv_phys_offset address
-	str	r8, [r7]	@ save computed PHYS_OFFSET to __pv_phys_offset
+	add	r6, r6, r3	@ adjust __pv_phys_offset address
+	add	r7, r7, r3	@ adjust __pv_offset address
+	str	r8, [r6, #LOW_OFFSET]	@ save computed PHYS_OFFSET to __pv_phys_offset
+	strcc	ip, [r7, #HIGH_OFFSET]	@ save to __pv_offset high bits
 	mov	r6, r3, lsr #24	@ constant for add/sub instructions
 	teq	r3, r6, lsl #24 @ must be 16MiB aligned
 THUMB(	it	ne		@ cross section branch )
 	bne	__error
-	str	r6, [r7, #4]	@ save to __pv_offset
+	str	r3, [r7, #LOW_OFFSET]	@ save to __pv_offset low bits
 	b	__fixup_a_pv_table
 ENDPROC(__fixup_pv_table)
 
@@ -565,10 +599,19 @@ ENDPROC(__fixup_pv_table)
 	.long	__pv_table_begin
 	.long	__pv_table_end
 2:	.long	__pv_phys_offset
+	.long	__pv_offset
 
 	.text
 __fixup_a_pv_table:
+	adr	r0, 3f
+	ldr	r6, [r0]
+	add	r6, r6, r3
+	ldr	r0, [r6, #HIGH_OFFSET]	@ pv_offset high word
+	ldr	r6, [r6, #LOW_OFFSET]	@ pv_offset low word
+	mov	r6, r6, lsr #24
+	cmn	r0, #1
 #ifdef CONFIG_THUMB2_KERNEL
+	moveq	r0, #0x200000	@ set bit 21, mov to mvn instruction
 	lsls	r6, #24
 	beq	2f
 	clz	r7, r6
@@ -582,18 +625,42 @@ __fixup_a_pv_table:
 	b	2f
 1:	add     r7, r3
 	ldrh	ip, [r7, #2]
-	and	ip, 0x8f00
-	orr	ip, r6	@ mask in offset bits 31-24
+ARM_BE8(rev16	ip, ip)
+	tst	ip, #0x4000
+	and	ip, #0x8f00
+	orrne	ip, r6	@ mask in offset bits 31-24
+	orreq	ip, r0	@ mask in offset bits 7-0
+ARM_BE8(rev16	ip, ip)
 	strh	ip, [r7, #2]
+	bne	2f
+	ldrh	ip, [r7]
+ARM_BE8(rev16	ip, ip)
+	bic	ip, #0x20
+	orr	ip, ip, r0, lsr #16
+ARM_BE8(rev16	ip, ip)
+	strh	ip, [r7]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
 	bx	lr
 #else
+	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
 	b	2f
 1:	ldr	ip, [r7, r3]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	@ in BE8, we load data in BE, but instructions still in LE
+	bic	ip, ip, #0xff000000
+	tst	ip, #0x000f0000	@ check the rotation field
+	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
+	biceq	ip, ip, #0x00004000 @ clear bit 22
+	orreq	ip, ip, r0, lsl #24 @ mask in offset bits 7-0
+#else
 	bic	ip, ip, #0x000000ff
-	orr	ip, ip, r6	@ mask in offset bits 31-24
+	tst	ip, #0xf00	@ check the rotation field
+	orrne	ip, ip, r6	@ mask in offset bits 31-24
+	biceq	ip, ip, #0x400000	@ clear bit 22
+	orreq	ip, ip, r0	@ mask in offset bits 7-0
+#endif
 	str	ip, [r7, r3]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
@@ -602,28 +669,30 @@ __fixup_a_pv_table:
 #endif
 ENDPROC(__fixup_a_pv_table)
 
+	.align
+3:	.long __pv_offset
+
 ENTRY(fixup_pv_table)
 	stmfd	sp!, {r4 - r7, lr}
-	ldr	r2, 2f			@ get address of __pv_phys_offset
 	mov	r3, #0			@ no offset
 	mov	r4, r0			@ r0 = table start
 	add	r5, r0, r1		@ r1 = table size
-	ldr	r6, [r2, #4]		@ get __pv_offset
 	bl	__fixup_a_pv_table
 	ldmfd	sp!, {r4 - r7, pc}
 ENDPROC(fixup_pv_table)
 
-	.align
-2:	.long	__pv_phys_offset
-
 	.data
 	.globl	__pv_phys_offset
 	.type	__pv_phys_offset, %object
 __pv_phys_offset:
-	.long	0
-	.size	__pv_phys_offset, . - __pv_phys_offset
+	.quad	0
+	.size	__pv_phys_offset, . -__pv_phys_offset
+
+	.globl	__pv_offset
+	.type	__pv_offset, %object
 __pv_offset:
-	.long	0
+	.quad	0
+	.size	__pv_offset, . -__pv_offset
 #endif
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 7b95de601357..3d446605cbf8 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -344,13 +344,13 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		/* Breakpoint */
 		ctrl_base = ARM_BASE_BCR;
 		val_base = ARM_BASE_BVR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		slots = this_cpu_ptr(bp_on_reg);
 		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
 		ctrl_base = ARM_BASE_WCR;
 		val_base = ARM_BASE_WVR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+		slots = this_cpu_ptr(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -396,12 +396,12 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
 		/* Breakpoint */
 		base = ARM_BASE_BCR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		slots = this_cpu_ptr(bp_on_reg);
 		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
 		base = ARM_BASE_WCR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+		slots = this_cpu_ptr(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -697,7 +697,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+	slots = this_cpu_ptr(wp_on_reg);
 
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
@@ -768,7 +768,7 @@ static void watchpoint_single_step_handler(unsigned long pc)
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+	slots = this_cpu_ptr(wp_on_reg);
 
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
@@ -802,7 +802,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
-	slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+	slots = this_cpu_ptr(bp_on_reg);
 
 	/* The exception entry code places the amended lr in the PC. */
 	addr = regs->ARM_pc;
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 170e9f34003f..a7b621ece23d 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -171,13 +171,13 @@ static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
 static void __kprobes set_current_kprobe(struct kprobe *p)
 {
-	__get_cpu_var(current_kprobe) = p;
+	__this_cpu_write(current_kprobe, p);
 }
 
 static void __kprobes
@@ -421,10 +421,10 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			continue;
 
 		if (ri->rp && ri->rp->handler) {
-			__get_cpu_var(current_kprobe) = &ri->rp->kp;
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
 			ri->rp->handler(ri, regs);
-			__get_cpu_var(current_kprobe) = NULL;
+			__this_cpu_write(current_kprobe, NULL);
 		}
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 084dc8896986..45e478157278 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -24,6 +24,7 @@
 #include <asm/sections.h>
 #include <asm/smp_plat.h>
 #include <asm/unwind.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -40,7 +41,7 @@
 void *module_alloc(unsigned long size)
 {
 	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, -1,
+				GFP_KERNEL, PAGE_KERNEL_EXEC, NUMA_NO_NODE,
 				__builtin_return_address(0));
 }
 #endif
@@ -60,6 +61,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		Elf32_Sym *sym;
 		const char *symname;
 		s32 offset;
+		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
 #endif
@@ -95,7 +97,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		case R_ARM_PC24:
 		case R_ARM_CALL:
 		case R_ARM_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
+			offset = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = (offset & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;
 
@@ -111,9 +114,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			}
 
 			offset >>= 2;
+			offset &= 0x00ffffff;
 
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
+			*(u32 *)loc &= __opcode_to_mem_arm(0xff000000);
+			*(u32 *)loc |= __opcode_to_mem_arm(offset);
 			break;
 
 	       case R_ARM_V4BX:
@@ -121,8 +125,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			* other bits to re-code instruction as
 			* MOV PC,Rm.
 			*/
-		       *(u32 *)loc &= 0xf000000f;
-		       *(u32 *)loc |= 0x01a0f000;
+		       *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f);
+		       *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000);
 		       break;
 
 		case R_ARM_PREL31:
@@ -132,7 +136,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 
 		case R_ARM_MOVW_ABS_NC:
 		case R_ARM_MOVT_ABS:
-			offset = *(u32 *)loc;
+			offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
 			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
 			offset = (offset ^ 0x8000) - 0x8000;
 
@@ -140,16 +144,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u32 *)loc &= 0xfff0f000;
-			*(u32 *)loc |= ((offset & 0xf000) << 4) |
-					(offset & 0x0fff);
+			tmp &= 0xfff0f000;
+			tmp |= ((offset & 0xf000) << 4) |
+				(offset & 0x0fff);
+
+			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * 25 bit signed address range (Thumb-2 BL and B.W
@@ -198,17 +204,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			sign = (offset >> 24) & 1;
 			j1 = sign ^ (~(offset >> 23) & 1);
 			j2 = sign ^ (~(offset >> 22) & 1);
-			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+			upper = (u16)((upper & 0xf800) | (sign << 10) |
 					    ((offset >> 12) & 0x03ff));
-			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
-						  (j1 << 13) | (j2 << 11) |
-						  ((offset >> 1) & 0x07ff));
+			lower = (u16)((lower & 0xd000) |
+				      (j1 << 13) | (j2 << 11) |
+				      ((offset >> 1) & 0x07ff));
+
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 
 		case R_ARM_THM_MOVW_ABS_NC:
 		case R_ARM_THM_MOVT_ABS:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * MOVT/MOVW instructions encoding in Thumb-2:
@@ -229,12 +238,14 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u16 *)loc = (u16)((upper & 0xfbf0) |
-					    ((offset & 0xf000) >> 12) |
-					    ((offset & 0x0800) >> 1));
-			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
-						  ((offset & 0x0700) << 4) |
-						  (offset & 0x00ff));
+			upper = (u16)((upper & 0xfbf0) |
+				      ((offset & 0xf000) >> 12) |
+				      ((offset & 0x0800) >> 1));
+			lower = (u16)((lower & 0x8f00) |
+				      ((offset & 0x0700) << 4) |
+				      (offset & 0x00ff));
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 #endif
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e186ee1e63f6..bc3f2efa0d86 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -256,12 +256,11 @@ validate_event(struct pmu_hw_events *hw_events,
 	       struct perf_event *event)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu *leader_pmu = event->group_leader->pmu;
 
 	if (is_software_event(event))
 		return 1;
 
-	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
+	if (event->state < PERF_EVENT_STATE_OFF)
 		return 1;
 
 	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 8d6147b2001f..d85055cd24ba 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -68,7 +68,7 @@ EXPORT_SYMBOL_GPL(perf_num_counters);
 
 static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
 {
-	return &__get_cpu_var(cpu_hw_events);
+	return this_cpu_ptr(&cpu_hw_events);
 }
 
 static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
diff --git a/arch/arm/kernel/perf_regs.c b/arch/arm/kernel/perf_regs.c
new file mode 100644
index 000000000000..6e4379c67cbc
--- /dev/null
+++ b/arch/arm/kernel/perf_regs.c
@@ -0,0 +1,30 @@
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/bug.h>
+#include <asm/perf_regs.h>
+#include <asm/ptrace.h>
+
+u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+	if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM_MAX))
+		return 0;
+
+	return regs->uregs[idx];
+}
+
+#define REG_RESERVED (~((1ULL << PERF_REG_ARM_MAX) - 1))
+
+int perf_reg_validate(u64 mask)
+{
+	if (!mask || mask & REG_RESERVED)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	return PERF_SAMPLE_REGS_ABI_32;
+}
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 70ded3fb42d9..570a48cc3d64 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/irqchip/arm-gic.h>
 #include <linux/smp.h>
 #include <linux/of.h>
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 0e1e2b3afa45..6a1b8a81b1ae 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -73,6 +73,8 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(const struct machine_desc *desc);
+extern void early_paging_init(const struct machine_desc *,
+			      struct proc_info_list *);
 extern void sanity_check_meminfo(void);
 extern enum reboot_mode reboot_mode;
 extern void setup_dma_zone(const struct machine_desc *desc);
@@ -599,6 +601,8 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
+	erratum_a15_798181_init();
+
 	feat_v6_fixup();
 
 	cacheid_init();
@@ -619,9 +623,10 @@ void __init dump_machine_table(void)
 		/* can't use cpu_relax() here as it may require MMU setup */;
 }
 
-int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
+int __init arm_add_memory(u64 start, u64 size)
 {
 	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+	u64 aligned_start;
 
 	if (meminfo.nr_banks >= NR_BANKS) {
 		printk(KERN_CRIT "NR_BANKS too low, "
@@ -634,10 +639,16 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	 * Size is appropriately rounded down, start is rounded up.
 	 */
 	size -= start & ~PAGE_MASK;
-	bank->start = PAGE_ALIGN(start);
+	aligned_start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_ARM_LPAE
-	if (bank->start + size < bank->start) {
+#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
+	if (aligned_start > ULONG_MAX) {
+		printk(KERN_CRIT "Ignoring memory at 0x%08llx outside "
+		       "32-bit physical address space\n", (long long)start);
+		return -EINVAL;
+	}
+
+	if (aligned_start + size > ULONG_MAX) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);
 		/*
@@ -645,10 +656,11 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
 		 * This means we lose a page after masking.
 		 */
-		size = ULONG_MAX - bank->start;
+		size = ULONG_MAX - aligned_start;
 	}
 #endif
 
+	bank->start = aligned_start;
 	bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
 
 	/*
@@ -669,8 +681,8 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 static int __init early_mem(char *p)
 {
 	static int usermem __initdata = 0;
-	phys_addr_t size;
-	phys_addr_t start;
+	u64 size;
+	u64 start;
 	char *endp;
 
 	/*
@@ -878,6 +890,8 @@ void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
+	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
@@ -975,6 +989,7 @@ static const char *hwcap_str[] = {
 	"idivt",
 	"vfpd32",
 	"lpae",
+	"evtstrm",
 	NULL
 };
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ab3304225272..04d63880037f 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -21,29 +21,7 @@
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-/*
- * For ARM syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-
-/*
- * With EABI, the syscall number has to be loaded into r7.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-/*
- * For Thumb syscalls, we pass the syscall number via r7.  We therefore
- * need two 16-bit instructions.
- */
-#define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-static const unsigned long sigreturn_codes[7] = {
-	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
-};
+extern const unsigned long sigreturn_codes[7];
 
 static unsigned long signal_return_offset;
 
@@ -375,12 +353,18 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		 */
 		thumb = handler & 1;
 
-		if (thumb) {
-			cpsr |= PSR_T_BIT;
 #if __LINUX_ARM_ARCH__ >= 7
-			/* clear the If-Then Thumb-2 execution state */
-			cpsr &= ~PSR_IT_MASK;
+		/*
+		 * Clear the If-Then Thumb-2 execution state
+		 * ARM spec requires this to be all 000s in ARM mode
+		 * Snapdragon S4/Krait misbehaves on a Thumb=>ARM
+		 * signal transition without this.
+		 */
+		cpsr &= ~PSR_IT_MASK;
 #endif
+
+		if (thumb) {
+			cpsr |= PSR_T_BIT;
 		} else
 			cpsr &= ~PSR_T_BIT;
 	}
diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
new file mode 100644
index 000000000000..3c5d0f2170fd
--- /dev/null
+++ b/arch/arm/kernel/sigreturn_codes.S
@@ -0,0 +1,80 @@
+/*
+ * sigreturn_codes.S - code sinpets for sigreturn syscalls
+ *
+ * Created by:	Victor Kamensky, 2013-08-13
+ * Copyright:	(C) 2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/unistd.h>
+
+/*
+ * For ARM syscalls, we encode the syscall number into the instruction.
+ * With EABI, the syscall number has to be loaded into r7. As result
+ * ARM syscall sequence snippet will have move and svc in .arm encoding
+ *
+ * For Thumb syscalls, we pass the syscall number via r7.  We therefore
+ * need two 16-bit instructions in .thumb encoding
+ *
+ * Please note sigreturn_codes code are not executed in place. Instead
+ * they just copied by kernel into appropriate places. Code inside of
+ * arch/arm/kernel/signal.c is very sensitive to layout of these code
+ * snippets.
+ */
+
+#if __LINUX_ARM_ARCH__ <= 4
+	/*
+	 * Note we manually set minimally required arch that supports
+	 * required thumb opcodes for early arch versions. It is OK
+	 * for this file to be used in combination with other
+	 * lower arch variants, since these code snippets are only
+	 * used as input data.
+	 */
+	.arch armv4t
+#endif
+
+	.section .rodata
+	.global sigreturn_codes
+	.type	sigreturn_codes, #object
+
+	.arm
+
+sigreturn_codes:
+
+	/* ARM sigreturn syscall code snippet */
+	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/* ARM sigreturn_rt syscall code snippet */
+	.arm
+	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn_rt syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/*
+	 * Note on addtional space: setup_return in signal.c
+	 * algorithm uses two words copy regardless whether
+	 * it is thumb case or not, so we need additional
+	 * word after real last entry.
+	 */
+	.arm
+	.space	4
+
+	.size	sigreturn_codes, . - sigreturn_codes
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index db1536b8b30b..b907d9b790ab 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -55,6 +55,7 @@
  * specific registers and some other data for resume.
  *  r0 = suspend function arg0
  *  r1 = suspend function
+ *  r2 = MPIDR value the resuming CPU will use
  */
 ENTRY(__cpu_suspend)
 	stmfd	sp!, {r4 - r11, lr}
@@ -67,23 +68,18 @@ ENTRY(__cpu_suspend)
 	mov	r5, sp			@ current virtual SP
 	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
 	sub	sp, sp, r4		@ allocate CPU state on stack
-	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
-	add	r0, sp, #8		@ save pointer to save block
-	mov	r1, r4			@ size of save block
-	mov	r2, r5			@ virtual SP
 	ldr	r3, =sleep_save_sp
+	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
 	ldr	r3, [r3, #SLEEP_SAVE_SP_VIRT]
-	ALT_SMP(mrc p15, 0, r9, c0, c0, 5)
-        ALT_UP_B(1f)
-	ldr	r8, =mpidr_hash
-	/*
-	 * This ldmia relies on the memory layout of the mpidr_hash
-	 * struct mpidr_hash.
-	 */
-	ldmia	r8, {r4-r7}	@ r4 = mpidr mask (r5,r6,r7) = l[0,1,2] shifts
-	compute_mpidr_hash	lr, r5, r6, r7, r9, r4
-	add	r3, r3, lr, lsl #2
-1:
+	ALT_SMP(ldr r0, =mpidr_hash)
+	ALT_UP_B(1f)
+	/* This ldmia relies on the memory layout of the mpidr_hash struct */
+	ldmia	r0, {r1, r6-r8}	@ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts
+	compute_mpidr_hash	r0, r6, r7, r8, r2, r1
+	add	r3, r3, r0, lsl #2
+1:	mov	r2, r5			@ virtual SP
+	mov	r1, r4			@ size of save block
+	add	r0, sp, #8		@ pointer to save block
 	bl	__cpu_suspend_save
 	adr	lr, BSYM(cpu_suspend_abort)
 	ldmfd	sp!, {r0, pc}		@ call suspend fn
@@ -130,6 +126,7 @@ ENDPROC(cpu_resume_after_mmu)
 	.data
 	.align
 ENTRY(cpu_resume)
+ARM_BE8(setend be)			@ ensure we are in BE mode
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 92d10e503746..dc894ab3622b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -25,6 +25,7 @@
 #include <linux/clockchips.h>
 #include <linux/completion.h>
 #include <linux/cpufreq.h>
+#include <linux/irq_work.h>
 
 #include <linux/atomic.h>
 #include <asm/smp.h>
@@ -41,7 +42,6 @@
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
-#include <asm/localtimer.h>
 #include <asm/smp_plat.h>
 #include <asm/virt.h>
 #include <asm/mach/arch.h>
@@ -67,6 +67,8 @@ enum ipi_msg_type {
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
+	IPI_IRQ_WORK,
+	IPI_COMPLETION,
 };
 
 static DECLARE_COMPLETION(cpu_running);
@@ -81,7 +83,7 @@ void __init smp_set_ops(struct smp_operations *ops)
 
 static unsigned long get_arch_pgd(pgd_t *pgd)
 {
-	phys_addr_t pgdir = virt_to_phys(pgd);
+	phys_addr_t pgdir = virt_to_idmap(pgd);
 	BUG_ON(pgdir & ARCH_PGD_MASK);
 	return pgdir >> ARCH_PGD_SHIFT;
 }
@@ -156,8 +158,6 @@ int platform_can_cpu_hotplug(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void percpu_timer_stop(void);
-
 static int platform_cpu_kill(unsigned int cpu)
 {
 	if (smp_ops.cpu_kill)
@@ -201,11 +201,6 @@ int __cpu_disable(void)
 	migrate_irqs();
 
 	/*
-	 * Stop the local timer for this CPU.
-	 */
-	percpu_timer_stop();
-
-	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
 	 * from the vm mask set of all processes.
 	 *
@@ -326,8 +321,6 @@ static void smp_store_cpu_info(unsigned int cpuid)
 	store_cpu_topology(cpuid);
 }
 
-static void percpu_timer_setup(void);
-
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -382,11 +375,6 @@ asmlinkage void secondary_start_kernel(void)
 	set_cpu_online(cpu, true);
 	complete(&cpu_running);
 
-	/*
-	 * Setup the percpu timer for this CPU.
-	 */
-	percpu_timer_setup();
-
 	local_irq_enable();
 	local_fiq_enable();
 
@@ -424,12 +412,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 	if (ncores > 1 && max_cpus) {
 		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
 		 * Initialise the present map, which describes the set of CPUs
 		 * actually populated at the present time. A platform should
 		 * re-initialize the map in the platforms smp_prepare_cpus()
@@ -469,6 +451,14 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
+#ifdef CONFIG_IRQ_WORK
+void arch_irq_work_raise(void)
+{
+	if (is_smp())
+		smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK);
+}
+#endif
+
 static const char *ipi_types[NR_IPI] = {
 #define S(x,s)	[x] = s
 	S(IPI_WAKEUP, "CPU wakeup interrupts"),
@@ -477,6 +467,8 @@ static const char *ipi_types[NR_IPI] = {
 	S(IPI_CALL_FUNC, "Function call interrupts"),
 	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
+	S(IPI_IRQ_WORK, "IRQ work interrupts"),
+	S(IPI_COMPLETION, "completion interrupts"),
 };
 
 void show_ipi_list(struct seq_file *p, int prec)
@@ -505,11 +497,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu)
 	return sum;
 }
 
-/*
- * Timer (local or broadcast) support
- */
-static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
-
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 void tick_broadcast(const struct cpumask *mask)
 {
@@ -517,67 +504,6 @@ void tick_broadcast(const struct cpumask *mask)
 }
 #endif
 
-static void broadcast_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-}
-
-static void broadcast_timer_setup(struct clock_event_device *evt)
-{
-	evt->name	= "dummy_timer";
-	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
-			  CLOCK_EVT_FEAT_PERIODIC |
-			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 100;
-	evt->mult	= 1;
-	evt->set_mode	= broadcast_timer_set_mode;
-
-	clockevents_register_device(evt);
-}
-
-static struct local_timer_ops *lt_ops;
-
-#ifdef CONFIG_LOCAL_TIMERS
-int local_timer_register(struct local_timer_ops *ops)
-{
-	if (!is_smp() || !setup_max_cpus)
-		return -ENXIO;
-
-	if (lt_ops)
-		return -EBUSY;
-
-	lt_ops = ops;
-	return 0;
-}
-#endif
-
-static void percpu_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	evt->cpumask = cpumask_of(cpu);
-
-	if (!lt_ops || lt_ops->setup(evt))
-		broadcast_timer_setup(evt);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The generic clock events code purposely does not stop the local timer
- * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it
- * manually here.
- */
-static void percpu_timer_stop(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	if (lt_ops)
-		lt_ops->stop(evt);
-}
-#endif
-
 static DEFINE_RAW_SPINLOCK(stop_lock);
 
 /*
@@ -602,6 +528,19 @@ static void ipi_cpu_stop(unsigned int cpu)
 		cpu_relax();
 }
 
+static DEFINE_PER_CPU(struct completion *, cpu_completion);
+
+int register_ipi_completion(struct completion *completion, int cpu)
+{
+	per_cpu(cpu_completion, cpu) = completion;
+	return IPI_COMPLETION;
+}
+
+static void ipi_complete(unsigned int cpu)
+{
+	complete(per_cpu(cpu_completion, cpu));
+}
+
 /*
  * Main handler for inter-processor interrupts
  */
@@ -652,6 +591,20 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
+#ifdef CONFIG_IRQ_WORK
+	case IPI_IRQ_WORK:
+		irq_enter();
+		irq_work_run();
+		irq_exit();
+		break;
+#endif
+
+	case IPI_COMPLETION:
+		irq_enter();
+		ipi_complete(cpu);
+		irq_exit();
+		break;
+
 	default:
 		printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
 		       cpu, ipinr);
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 5bc1a63284e3..1aafa0d785eb 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -28,7 +28,7 @@
  */
 unsigned int __init scu_get_core_count(void __iomem *scu_base)
 {
-	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
 	return (ncores & 0x03) + 1;
 }
 
@@ -42,19 +42,19 @@ void scu_enable(void __iomem *scu_base)
 #ifdef CONFIG_ARM_ERRATA_764369
 	/* Cortex-A9 only */
 	if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
-		scu_ctrl = __raw_readl(scu_base + 0x30);
+		scu_ctrl = readl_relaxed(scu_base + 0x30);
 		if (!(scu_ctrl & 1))
-			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+			writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
 	}
 #endif
 
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
 		return;
 
 	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
 
 	/*
 	 * Ensure that the data accessed by CPU0 before the SCU was
@@ -80,9 +80,9 @@ int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;
 
-	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
 	val |= mode;
-	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
 
 	return 0;
 }
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index 83ccca303df8..95d063620b76 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -70,6 +70,40 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+bool (*erratum_a15_798181_handler)(void);
+
+static bool erratum_a15_798181_partial(void)
+{
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb(ish);
+	return false;
+}
+
+static bool erratum_a15_798181_broadcast(void)
+{
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb(ish);
+	return true;
+}
+
+void erratum_a15_798181_init(void)
+{
+	unsigned int midr = read_cpuid_id();
+	unsigned int revidr = read_cpuid(CPUID_REVIDR);
+
+	/* Cortex-A15 r0p0..r3p2 w/o ECO fix affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2 ||
+	    (revidr & 0x210) == 0x210) {
+		return;
+	}
+	if (revidr & 0x10)
+		erratum_a15_798181_handler = erratum_a15_798181_partial;
+	else
+		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
+}
+#endif
+
 static void ipi_flush_tlb_a15_erratum(void *arg)
 {
 	dmb();
@@ -80,7 +114,6 @@ static void broadcast_tlb_a15_erratum(void)
 	if (!erratum_a15_798181())
 		return;
 
-	dummy_flush_tlb_a15_erratum();
 	smp_call_function(ipi_flush_tlb_a15_erratum, NULL, 1);
 }
 
@@ -92,7 +125,6 @@ static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
 	if (!erratum_a15_798181())
 		return;
 
-	dummy_flush_tlb_a15_erratum();
 	this_cpu = get_cpu();
 	a15_erratum_get_cpumask(this_cpu, mm, &mask);
 	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 25956204ef23..6591e26fc13f 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -24,7 +25,6 @@
 
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
-#include <asm/localtimer.h>
 
 /* set up by the platform code */
 static void __iomem *twd_base;
@@ -33,7 +33,7 @@ static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 static DEFINE_PER_CPU(bool, percpu_setup_called);
 
-static struct clock_event_device __percpu **twd_evt;
+static struct clock_event_device __percpu *twd_evt;
 static int twd_ppi;
 
 static void twd_set_mode(enum clock_event_mode mode,
@@ -45,7 +45,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+		writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
 			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -58,18 +58,18 @@ static void twd_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 }
 
 static int twd_set_next_event(unsigned long evt,
 			struct clock_event_device *unused)
 {
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+	unsigned long ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
 
 	ctrl |= TWD_TIMER_CONTROL_ENABLE;
 
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(evt, twd_base + TWD_TIMER_COUNTER);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 
 	return 0;
 }
@@ -82,16 +82,18 @@ static int twd_set_next_event(unsigned long evt,
  */
 static int twd_timer_ack(void)
 {
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+	if (readl_relaxed(twd_base + TWD_TIMER_INTSTAT)) {
+		writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
 		return 1;
 	}
 
 	return 0;
 }
 
-static void twd_timer_stop(struct clock_event_device *clk)
+static void twd_timer_stop(void)
 {
+	struct clock_event_device *clk = __this_cpu_ptr(twd_evt);
+
 	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 	disable_percpu_irq(clk->irq);
 }
@@ -106,7 +108,7 @@ static void twd_update_frequency(void *new_rate)
 {
 	twd_timer_rate = *((unsigned long *) new_rate);
 
-	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+	clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate);
 }
 
 static int twd_rate_change(struct notifier_block *nb,
@@ -132,7 +134,7 @@ static struct notifier_block twd_clk_nb = {
 
 static int twd_clk_init(void)
 {
-	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
+	if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return clk_notifier_register(twd_clk, &twd_clk_nb);
 
 	return 0;
@@ -151,7 +153,7 @@ static void twd_update_frequency(void *data)
 {
 	twd_timer_rate = clk_get_rate(twd_clk);
 
-	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+	clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate);
 }
 
 static int twd_cpufreq_transition(struct notifier_block *nb,
@@ -177,7 +179,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
+	if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
@@ -209,15 +211,15 @@ static void twd_calibrate_rate(void)
 		waitjiffies += 5;
 
 				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+		writel_relaxed(0x1, twd_base + TWD_TIMER_CONTROL);
 
 				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+		writel_relaxed(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
 
 		while (get_jiffies_64() < waitjiffies)
 			udelay(10);
 
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+		count = readl_relaxed(twd_base + TWD_TIMER_COUNTER);
 
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
@@ -228,7 +230,7 @@ static void twd_calibrate_rate(void)
 
 static irqreturn_t twd_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	struct clock_event_device *evt = dev_id;
 
 	if (twd_timer_ack()) {
 		evt->event_handler(evt);
@@ -265,9 +267,9 @@ static void twd_get_clock(struct device_node *np)
 /*
  * Setup the local clock events for a CPU.
  */
-static int twd_timer_setup(struct clock_event_device *clk)
+static void twd_timer_setup(void)
 {
-	struct clock_event_device **this_cpu_clk;
+	struct clock_event_device *clk = __this_cpu_ptr(twd_evt);
 	int cpu = smp_processor_id();
 
 	/*
@@ -275,10 +277,10 @@ static int twd_timer_setup(struct clock_event_device *clk)
 	 * bother with the below.
 	 */
 	if (per_cpu(percpu_setup_called, cpu)) {
-		__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-		clockevents_register_device(*__this_cpu_ptr(twd_evt));
+		writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
+		clockevents_register_device(clk);
 		enable_percpu_irq(clk->irq, 0);
-		return 0;
+		return;
 	}
 	per_cpu(percpu_setup_called, cpu) = true;
 
@@ -288,7 +290,7 @@ static int twd_timer_setup(struct clock_event_device *clk)
 	 * The following is done once per CPU the first time .setup() is
 	 * called.
 	 */
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@@ -297,27 +299,37 @@ static int twd_timer_setup(struct clock_event_device *clk)
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
 	clk->irq = twd_ppi;
-
-	this_cpu_clk = __this_cpu_ptr(twd_evt);
-	*this_cpu_clk = clk;
+	clk->cpumask = cpumask_of(cpu);
 
 	clockevents_config_and_register(clk, twd_timer_rate,
 					0xf, 0xffffffff);
 	enable_percpu_irq(clk->irq, 0);
+}
 
-	return 0;
+static int twd_timer_cpu_notify(struct notifier_block *self,
+				unsigned long action, void *hcpu)
+{
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		twd_timer_setup();
+		break;
+	case CPU_DYING:
+		twd_timer_stop();
+		break;
+	}
+
+	return NOTIFY_OK;
 }
 
-static struct local_timer_ops twd_lt_ops = {
-	.setup	= twd_timer_setup,
-	.stop	= twd_timer_stop,
+static struct notifier_block twd_timer_cpu_nb = {
+	.notifier_call = twd_timer_cpu_notify,
 };
 
 static int __init twd_local_timer_common_register(struct device_node *np)
 {
 	int err;
 
-	twd_evt = alloc_percpu(struct clock_event_device *);
+	twd_evt = alloc_percpu(struct clock_event_device);
 	if (!twd_evt) {
 		err = -ENOMEM;
 		goto out_free;
@@ -329,12 +341,22 @@ static int __init twd_local_timer_common_register(struct device_node *np)
 		goto out_free;
 	}
 
-	err = local_timer_register(&twd_lt_ops);
+	err = register_cpu_notifier(&twd_timer_cpu_nb);
 	if (err)
 		goto out_irq;
 
 	twd_get_clock(np);
 
+	/*
+	 * Immediately configure the timer on the boot CPU, unless we need
+	 * jiffies to be incrementing to calibrate the rate in which case
+	 * setup the timer in late_time_init.
+	 */
+	if (twd_timer_rate)
+		twd_timer_setup();
+	else
+		late_time_init = twd_timer_setup;
+
 	return 0;
 
 out_irq:
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 41cf3cbf756d..2835d35234ca 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -10,7 +10,7 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long), u32 cpuid);
 extern void cpu_resume_mmu(void);
 
 #ifdef CONFIG_MMU
@@ -21,6 +21,7 @@ extern void cpu_resume_mmu(void);
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	struct mm_struct *mm = current->active_mm;
+	u32 __mpidr = cpu_logical_map(smp_processor_id());
 	int ret;
 
 	if (!idmap_pgd)
@@ -32,7 +33,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 * resume (indicated by a zero return code), we need to switch
 	 * back to the correct page tables.
 	 */
-	ret = __cpu_suspend(arg, fn);
+	ret = __cpu_suspend(arg, fn, __mpidr);
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -44,7 +45,8 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 #else
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
-	return __cpu_suspend(arg, fn);
+	u32 __mpidr = cpu_logical_map(smp_processor_id());
+	return __cpu_suspend(arg, fn, __mpidr);
 }
 #define	idmap_pgd	NULL
 #endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 98aee3258398..829a96d4a179 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -11,25 +11,26 @@
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
  */
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/profile.h>
 #include <linux/sched.h>
+#include <linux/sched_clock.h>
 #include <linux/smp.h>
+#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
 #include <linux/timer.h>
-#include <linux/clocksource.h>
-#include <linux/irq.h>
-#include <linux/sched_clock.h>
 
-#include <asm/thread_info.h>
-#include <asm/stacktrace.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/stacktrace.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
@@ -116,8 +117,12 @@ int __init register_persistent_clock(clock_access_fn read_boot,
 
 void __init time_init(void)
 {
-	if (machine_desc->init_time)
+	if (machine_desc->init_time) {
 		machine_desc->init_time();
-	else
+	} else {
+#ifdef CONFIG_COMMON_CLK
+		of_clk_init(NULL);
+#endif
 		clocksource_of_init();
+	}
 }
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 8fcda140358d..6125f259b7b5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -34,6 +34,7 @@
 #include <asm/unwind.h>
 #include <asm/tls.h>
 #include <asm/system_misc.h>
+#include <asm/opcodes.h>
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
@@ -341,15 +342,17 @@ void arm_notify_die(const char *str, struct pt_regs *regs,
 int is_valid_bugaddr(unsigned long pc)
 {
 #ifdef CONFIG_THUMB2_KERNEL
-	unsigned short bkpt;
+	u16 bkpt;
+	u16 insn = __opcode_to_mem_thumb16(BUG_INSTR_VALUE);
 #else
-	unsigned long bkpt;
+	u32 bkpt;
+	u32 insn = __opcode_to_mem_arm(BUG_INSTR_VALUE);
 #endif
 
 	if (probe_kernel_address((unsigned *)pc, bkpt))
 		return 0;
 
-	return bkpt == BUG_INSTR_VALUE;
+	return bkpt == insn;
 }
 
 #endif
@@ -402,25 +405,28 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (processor_mode(regs) == SVC_MODE) {
 #ifdef CONFIG_THUMB2_KERNEL
 		if (thumb_mode(regs)) {
-			instr = ((u16 *)pc)[0];
+			instr = __mem_to_opcode_thumb16(((u16 *)pc)[0]);
 			if (is_wide_instruction(instr)) {
-				instr <<= 16;
-				instr |= ((u16 *)pc)[1];
+				u16 inst2;
+				inst2 = __mem_to_opcode_thumb16(((u16 *)pc)[1]);
+				instr = __opcode_thumb32_compose(instr, inst2);
 			}
 		} else
 #endif
-			instr = *(u32 *) pc;
+			instr = __mem_to_opcode_arm(*(u32 *) pc);
 	} else if (thumb_mode(regs)) {
 		if (get_user(instr, (u16 __user *)pc))
 			goto die_sig;
+		instr = __mem_to_opcode_thumb16(instr);
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
 			if (get_user(instr2, (u16 __user *)pc+1))
 				goto die_sig;
-			instr <<= 16;
-			instr |= instr2;
+			instr2 = __mem_to_opcode_thumb16(instr2);
+			instr = __opcode_thumb32_compose(instr, instr2);
 		}
 	} else if (get_user(instr, (u32 __user *)pc)) {
+		instr = __mem_to_opcode_arm(instr);
 		goto die_sig;
 	}
 
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
index ebf5015508b5..466bd299b1a8 100644
--- a/arch/arm/kvm/Kconfig
+++ b/arch/arm/kvm/Kconfig
@@ -20,6 +20,7 @@ config KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_ARM_HOST
 	depends on ARM_VIRT_EXT && ARM_LPAE
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
index d99bee4950e5..789bca9e64a7 100644
--- a/arch/arm/kvm/Makefile
+++ b/arch/arm/kvm/Makefile
@@ -19,6 +19,6 @@ kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o
 
 obj-y += kvm-arm.o init.o interrupts.o
 obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
-obj-y += coproc.o coproc_a15.o mmio.o psci.o perf.o
+obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
 obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o
 obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 9c697db2787e..2a700e00528d 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -65,7 +65,7 @@ static bool vgic_present;
 static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 {
 	BUG_ON(preemptible());
-	__get_cpu_var(kvm_arm_running_vcpu) = vcpu;
+	__this_cpu_write(kvm_arm_running_vcpu, vcpu);
 }
 
 /**
@@ -75,7 +75,7 @@ static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 struct kvm_vcpu *kvm_arm_get_running_vcpu(void)
 {
 	BUG_ON(preemptible());
-	return __get_cpu_var(kvm_arm_running_vcpu);
+	return __this_cpu_read(kvm_arm_running_vcpu);
 }
 
 /**
@@ -152,12 +152,13 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
 	return VM_FAULT_SIGBUS;
 }
 
-void kvm_arch_free_memslot(struct kvm_memory_slot *free,
+void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
 			   struct kvm_memory_slot *dont)
 {
 }
 
-int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
+int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
+			    unsigned long npages)
 {
 	return 0;
 }
@@ -797,6 +798,19 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			return -EFAULT;
 		return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr);
 	}
+	case KVM_ARM_PREFERRED_TARGET: {
+		int err;
+		struct kvm_vcpu_init init;
+
+		err = kvm_vcpu_preferred_target(&init);
+		if (err)
+			return err;
+
+		if (copy_to_user(argp, &init, sizeof(init)))
+			return -EFAULT;
+
+		return 0;
+	}
 	default:
 		return -EINVAL;
 	}
@@ -815,7 +829,7 @@ static void cpu_init_hyp_mode(void *dummy)
 
 	boot_pgd_ptr = kvm_mmu_get_boot_httbr();
 	pgd_ptr = kvm_mmu_get_httbr();
-	stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
+	stack_page = __this_cpu_read(kvm_arm_hyp_stack_page);
 	hyp_stack_ptr = stack_page + PAGE_SIZE;
 	vector_ptr = (unsigned long)__kvm_hyp_vector;
 
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index db9cf692d4dd..78c0885d6501 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -71,6 +71,98 @@ int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
+static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+	/*
+	 * Compute guest MPIDR. We build a virtual cluster out of the
+	 * vcpu_id, but we read the 'U' bit from the underlying
+	 * hardware directly.
+	 */
+	vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
+				     ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) |
+				     (vcpu->vcpu_id & 3));
+}
+
+/* TRM entries A7:4.3.31 A15:4.3.28 - RO WI */
+static bool access_actlr(struct kvm_vcpu *vcpu,
+			 const struct coproc_params *p,
+			 const struct coproc_reg *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
+	return true;
+}
+
+/* TRM entries A7:4.3.56, A15:4.3.60 - R/O. */
+static bool access_cbar(struct kvm_vcpu *vcpu,
+			const struct coproc_params *p,
+			const struct coproc_reg *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p);
+	return read_zero(vcpu, p);
+}
+
+/* TRM entries A7:4.3.49, A15:4.3.48 - R/O WI */
+static bool access_l2ctlr(struct kvm_vcpu *vcpu,
+			  const struct coproc_params *p,
+			  const struct coproc_reg *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
+	return true;
+}
+
+static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+	u32 l2ctlr, ncores;
+
+	asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
+	l2ctlr &= ~(3 << 24);
+	ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
+	/* How many cores in the current cluster and the next ones */
+	ncores -= (vcpu->vcpu_id & ~3);
+	/* Cap it to the maximum number of cores in a single cluster */
+	ncores = min(ncores, 3U);
+	l2ctlr |= (ncores & 3) << 24;
+
+	vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
+}
+
+static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+	u32 actlr;
+
+	/* ACTLR contains SMP bit: make sure you create all cpus first! */
+	asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+	/* Make the SMP bit consistent with the guest configuration */
+	if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
+		actlr |= 1U << 6;
+	else
+		actlr &= ~(1U << 6);
+
+	vcpu->arch.cp15[c1_ACTLR] = actlr;
+}
+
+/*
+ * TRM entries: A7:4.3.50, A15:4.3.49
+ * R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored).
+ */
+static bool access_l2ectlr(struct kvm_vcpu *vcpu,
+			   const struct coproc_params *p,
+			   const struct coproc_reg *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	*vcpu_reg(vcpu, p->Rt1) = 0;
+	return true;
+}
+
 /* See note at ARM ARM B1.14.4 */
 static bool access_dcsw(struct kvm_vcpu *vcpu,
 			const struct coproc_params *p,
@@ -153,10 +245,22 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
  *            registers preceding 32-bit ones.
  */
 static const struct coproc_reg cp15_regs[] = {
+	/* MPIDR: we use VMPIDR for guest access. */
+	{ CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
+			NULL, reset_mpidr, c0_MPIDR },
+
 	/* CSSELR: swapped by interrupt.S. */
 	{ CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
 			NULL, reset_unknown, c0_CSSELR },
 
+	/* ACTLR: trapped by HCR.TAC bit. */
+	{ CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
+			access_actlr, reset_actlr, c1_ACTLR },
+
+	/* CPACR: swapped by interrupt.S. */
+	{ CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
+			NULL, reset_val, c1_CPACR, 0x00000000 },
+
 	/* TTBR0/TTBR1: swapped by interrupt.S. */
 	{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
 	{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
@@ -195,6 +299,13 @@ static const struct coproc_reg cp15_regs[] = {
 	{ CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw},
 	{ CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw},
 	/*
+	 * L2CTLR access (guest wants to know #CPUs).
+	 */
+	{ CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
+			access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
+	{ CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
+
+	/*
 	 * Dummy performance monitor implementation.
 	 */
 	{ CRn( 9), CRm(12), Op1( 0), Op2( 0), is32, access_pmcr},
@@ -234,6 +345,9 @@ static const struct coproc_reg cp15_regs[] = {
 	/* CNTKCTL: swapped by interrupt.S. */
 	{ CRn(14), CRm( 1), Op1( 0), Op2( 0), is32,
 			NULL, reset_val, c14_CNTKCTL, 0x00000000 },
+
+	/* The Configuration Base Address Register. */
+	{ CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
 };
 
 /* Target specific emulation tables */
@@ -241,6 +355,12 @@ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
 
 void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
 {
+	unsigned int i;
+
+	for (i = 1; i < table->num; i++)
+		BUG_ON(cmp_reg(&table->table[i-1],
+			       &table->table[i]) >= 0);
+
 	target_tables[table->target] = table;
 }
 
diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c
index cf93472b9dd6..bb0cac1410cc 100644
--- a/arch/arm/kvm/coproc_a15.c
+++ b/arch/arm/kvm/coproc_a15.c
@@ -17,101 +17,12 @@
  * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
 #include <linux/kvm_host.h>
-#include <asm/cputype.h>
-#include <asm/kvm_arm.h>
-#include <asm/kvm_host.h>
-#include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
+#include <asm/kvm_emulate.h>
 #include <linux/init.h>
 
-static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
-	/*
-	 * Compute guest MPIDR:
-	 * (Even if we present only one VCPU to the guest on an SMP
-	 * host we don't set the U bit in the MPIDR, or vice versa, as
-	 * revealing the underlying hardware properties is likely to
-	 * be the best choice).
-	 */
-	vcpu->arch.cp15[c0_MPIDR] = (read_cpuid_mpidr() & ~MPIDR_LEVEL_MASK)
-		| (vcpu->vcpu_id & MPIDR_LEVEL_MASK);
-}
-
 #include "coproc.h"
 
-/* A15 TRM 4.3.28: RO WI */
-static bool access_actlr(struct kvm_vcpu *vcpu,
-			 const struct coproc_params *p,
-			 const struct coproc_reg *r)
-{
-	if (p->is_write)
-		return ignore_write(vcpu, p);
-
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
-	return true;
-}
-
-/* A15 TRM 4.3.60: R/O. */
-static bool access_cbar(struct kvm_vcpu *vcpu,
-			const struct coproc_params *p,
-			const struct coproc_reg *r)
-{
-	if (p->is_write)
-		return write_to_read_only(vcpu, p);
-	return read_zero(vcpu, p);
-}
-
-/* A15 TRM 4.3.48: R/O WI. */
-static bool access_l2ctlr(struct kvm_vcpu *vcpu,
-			  const struct coproc_params *p,
-			  const struct coproc_reg *r)
-{
-	if (p->is_write)
-		return ignore_write(vcpu, p);
-
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
-	return true;
-}
-
-static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
-	u32 l2ctlr, ncores;
-
-	asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
-	l2ctlr &= ~(3 << 24);
-	ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
-	l2ctlr |= (ncores & 3) << 24;
-
-	vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
-}
-
-static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
-	u32 actlr;
-
-	/* ACTLR contains SMP bit: make sure you create all cpus first! */
-	asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
-	/* Make the SMP bit consistent with the guest configuration */
-	if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
-		actlr |= 1U << 6;
-	else
-		actlr &= ~(1U << 6);
-
-	vcpu->arch.cp15[c1_ACTLR] = actlr;
-}
-
-/* A15 TRM 4.3.49: R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored). */
-static bool access_l2ectlr(struct kvm_vcpu *vcpu,
-			   const struct coproc_params *p,
-			   const struct coproc_reg *r)
-{
-	if (p->is_write)
-		return ignore_write(vcpu, p);
-
-	*vcpu_reg(vcpu, p->Rt1) = 0;
-	return true;
-}
-
 /*
  * A15-specific CP15 registers.
  * CRn denotes the primary register number, but is copied to the CRm in the
@@ -121,29 +32,9 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu,
  *            registers preceding 32-bit ones.
  */
 static const struct coproc_reg a15_regs[] = {
-	/* MPIDR: we use VMPIDR for guest access. */
-	{ CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
-			NULL, reset_mpidr, c0_MPIDR },
-
 	/* SCTLR: swapped by interrupt.S. */
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
 			NULL, reset_val, c1_SCTLR, 0x00C50078 },
-	/* ACTLR: trapped by HCR.TAC bit. */
-	{ CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
-			access_actlr, reset_actlr, c1_ACTLR },
-	/* CPACR: swapped by interrupt.S. */
-	{ CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
-			NULL, reset_val, c1_CPACR, 0x00000000 },
-
-	/*
-	 * L2CTLR access (guest wants to know #CPUs).
-	 */
-	{ CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
-			access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
-	{ CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
-
-	/* The Configuration Base Address Register. */
-	{ CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
 };
 
 static struct kvm_coproc_target_table a15_target_table = {
@@ -154,12 +45,6 @@ static struct kvm_coproc_target_table a15_target_table = {
 
 static int __init coproc_a15_init(void)
 {
-	unsigned int i;
-
-	for (i = 1; i < ARRAY_SIZE(a15_regs); i++)
-		BUG_ON(cmp_reg(&a15_regs[i-1],
-			       &a15_regs[i]) >= 0);
-
 	kvm_register_target_coproc_table(&a15_target_table);
 	return 0;
 }
diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_a7.c
new file mode 100644
index 000000000000..1df767331588
--- /dev/null
+++ b/arch/arm/kvm/coproc_a7.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Copyright (C) 2013 - ARM Ltd
+ *
+ * Authors: Rusty Russell <rusty@rustcorp.au>
+ *          Christoffer Dall <c.dall@virtualopensystems.com>
+ *          Jonathan Austin <jonathan.austin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+#include <linux/kvm_host.h>
+#include <asm/kvm_coproc.h>
+#include <asm/kvm_emulate.h>
+#include <linux/init.h>
+
+#include "coproc.h"
+
+/*
+ * Cortex-A7 specific CP15 registers.
+ * CRn denotes the primary register number, but is copied to the CRm in the
+ * user space API for 64-bit register access in line with the terminology used
+ * in the ARM ARM.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit
+ *            registers preceding 32-bit ones.
+ */
+static const struct coproc_reg a7_regs[] = {
+	/* SCTLR: swapped by interrupt.S. */
+	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
+			NULL, reset_val, c1_SCTLR, 0x00C50878 },
+};
+
+static struct kvm_coproc_target_table a7_target_table = {
+	.target = KVM_ARM_TARGET_CORTEX_A7,
+	.table = a7_regs,
+	.num = ARRAY_SIZE(a7_regs),
+};
+
+static int __init coproc_a7_init(void)
+{
+	kvm_register_target_coproc_table(&a7_target_table);
+	return 0;
+}
+late_initcall(coproc_a7_init);
diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c
index bdede9e7da51..d6c005283678 100644
--- a/arch/arm/kvm/emulate.c
+++ b/arch/arm/kvm/emulate.c
@@ -354,7 +354,7 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
 	*vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset;
 
 	if (is_pabt) {
-		/* Set DFAR and DFSR */
+		/* Set IFAR and IFSR */
 		vcpu->arch.cp15[c6_IFAR] = addr;
 		is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
 		/* Always give debug fault for now - should give guest a clue */
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index 152d03612181..20f8d97904af 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -190,6 +190,8 @@ int __attribute_const__ kvm_target_cpu(void)
 		return -EINVAL;
 
 	switch (part_number) {
+	case ARM_CPU_PART_CORTEX_A7:
+		return KVM_ARM_TARGET_CORTEX_A7;
 	case ARM_CPU_PART_CORTEX_A15:
 		return KVM_ARM_TARGET_CORTEX_A15;
 	default:
@@ -202,7 +204,7 @@ int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 {
 	unsigned int i;
 
-	/* We can only do a cortex A15 for now. */
+	/* We can only cope with guest==host and only on A15/A7 (for now). */
 	if (init->target != kvm_target_cpu())
 		return -EINVAL;
 
@@ -222,6 +224,26 @@ int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 	return kvm_reset_vcpu(vcpu);
 }
 
+int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init)
+{
+	int target = kvm_target_cpu();
+
+	if (target < 0)
+		return -ENODEV;
+
+	memset(init, 0, sizeof(*init));
+
+	/*
+	 * For now, we don't return any features.
+	 * In future, we might use features to return target
+	 * specific features available for the preferred
+	 * target type.
+	 */
+	init->target = (__u32)target;
+
+	return 0;
+}
+
 int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
 	return -EINVAL;
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index df4c82d47ad7..a92079011a83 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -73,23 +73,29 @@ static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
 }
 
 /**
- * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest
+ * kvm_handle_wfx - handle a WFI or WFE instructions trapped in guests
  * @vcpu:	the vcpu pointer
  * @run:	the kvm_run structure pointer
  *
- * Simply sets the wait_for_interrupts flag on the vcpu structure, which will
- * halt execution of world-switches and schedule other host processes until
- * there is an incoming IRQ or FIQ to the VM.
+ * WFE: Yield the CPU and come back to this vcpu when the scheduler
+ * decides to.
+ * WFI: Simply call kvm_vcpu_block(), which will halt execution of
+ * world-switches and schedule other host processes until there is an
+ * incoming IRQ or FIQ to the VM.
  */
-static int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run)
+static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	trace_kvm_wfi(*vcpu_pc(vcpu));
-	kvm_vcpu_block(vcpu);
+	if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE)
+		kvm_vcpu_on_spin(vcpu);
+	else
+		kvm_vcpu_block(vcpu);
+
 	return 1;
 }
 
 static exit_handle_fn arm_exit_handlers[] = {
-	[HSR_EC_WFI]		= kvm_handle_wfi,
+	[HSR_EC_WFI]		= kvm_handle_wfx,
 	[HSR_EC_CP15_32]	= kvm_handle_cp15_32,
 	[HSR_EC_CP15_64]	= kvm_handle_cp15_64,
 	[HSR_EC_CP14_MR]	= kvm_handle_cp14_access,
diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
index 0c25d9487d53..4cb5a93182e9 100644
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -23,6 +23,68 @@
 
 #include "trace.h"
 
+static void mmio_write_buf(char *buf, unsigned int len, unsigned long data)
+{
+	void *datap = NULL;
+	union {
+		u8	byte;
+		u16	hword;
+		u32	word;
+		u64	dword;
+	} tmp;
+
+	switch (len) {
+	case 1:
+		tmp.byte	= data;
+		datap		= &tmp.byte;
+		break;
+	case 2:
+		tmp.hword	= data;
+		datap		= &tmp.hword;
+		break;
+	case 4:
+		tmp.word	= data;
+		datap		= &tmp.word;
+		break;
+	case 8:
+		tmp.dword	= data;
+		datap		= &tmp.dword;
+		break;
+	}
+
+	memcpy(buf, datap, len);
+}
+
+static unsigned long mmio_read_buf(char *buf, unsigned int len)
+{
+	unsigned long data = 0;
+	union {
+		u16	hword;
+		u32	word;
+		u64	dword;
+	} tmp;
+
+	switch (len) {
+	case 1:
+		data = buf[0];
+		break;
+	case 2:
+		memcpy(&tmp.hword, buf, len);
+		data = tmp.hword;
+		break;
+	case 4:
+		memcpy(&tmp.word, buf, len);
+		data = tmp.word;
+		break;
+	case 8:
+		memcpy(&tmp.dword, buf, len);
+		data = tmp.dword;
+		break;
+	}
+
+	return data;
+}
+
 /**
  * kvm_handle_mmio_return -- Handle MMIO loads after user space emulation
  * @vcpu: The VCPU pointer
@@ -33,28 +95,27 @@
  */
 int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
-	unsigned long *dest;
+	unsigned long data;
 	unsigned int len;
 	int mask;
 
 	if (!run->mmio.is_write) {
-		dest = vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt);
-		*dest = 0;
-
 		len = run->mmio.len;
 		if (len > sizeof(unsigned long))
 			return -EINVAL;
 
-		memcpy(dest, run->mmio.data, len);
-
-		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
-				*((u64 *)run->mmio.data));
+		data = mmio_read_buf(run->mmio.data, len);
 
 		if (vcpu->arch.mmio_decode.sign_extend &&
 		    len < sizeof(unsigned long)) {
 			mask = 1U << ((len * 8) - 1);
-			*dest = (*dest ^ mask) - mask;
+			data = (data ^ mask) - mask;
 		}
+
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
+			       data);
+		data = vcpu_data_host_to_guest(vcpu, data, len);
+		*vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt) = data;
 	}
 
 	return 0;
@@ -105,6 +166,7 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		 phys_addr_t fault_ipa)
 {
 	struct kvm_exit_mmio mmio;
+	unsigned long data;
 	unsigned long rt;
 	int ret;
 
@@ -125,13 +187,15 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	}
 
 	rt = vcpu->arch.mmio_decode.rt;
+	data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), mmio.len);
+
 	trace_kvm_mmio((mmio.is_write) ? KVM_TRACE_MMIO_WRITE :
 					 KVM_TRACE_MMIO_READ_UNSATISFIED,
 			mmio.len, fault_ipa,
-			(mmio.is_write) ? *vcpu_reg(vcpu, rt) : 0);
+			(mmio.is_write) ? data : 0);
 
 	if (mmio.is_write)
-		memcpy(mmio.data, vcpu_reg(vcpu, rt), mmio.len);
+		mmio_write_buf(mmio.data, mmio.len, data);
 
 	if (vgic_handle_mmio(vcpu, run, &mmio))
 		return 1;
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index b0de86b56c13..371958370de4 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -19,6 +19,7 @@
 #include <linux/mman.h>
 #include <linux/kvm_host.h>
 #include <linux/io.h>
+#include <linux/hugetlb.h>
 #include <trace/events/kvm.h>
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
@@ -41,6 +42,8 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+#define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
+
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
 	/*
@@ -93,19 +96,29 @@ static bool page_empty(void *ptr)
 
 static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
 {
-	pmd_t *pmd_table = pmd_offset(pud, 0);
-	pud_clear(pud);
-	kvm_tlb_flush_vmid_ipa(kvm, addr);
-	pmd_free(NULL, pmd_table);
+	if (pud_huge(*pud)) {
+		pud_clear(pud);
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
+	} else {
+		pmd_t *pmd_table = pmd_offset(pud, 0);
+		pud_clear(pud);
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
+		pmd_free(NULL, pmd_table);
+	}
 	put_page(virt_to_page(pud));
 }
 
 static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
 {
-	pte_t *pte_table = pte_offset_kernel(pmd, 0);
-	pmd_clear(pmd);
-	kvm_tlb_flush_vmid_ipa(kvm, addr);
-	pte_free_kernel(NULL, pte_table);
+	if (kvm_pmd_huge(*pmd)) {
+		pmd_clear(pmd);
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
+	} else {
+		pte_t *pte_table = pte_offset_kernel(pmd, 0);
+		pmd_clear(pmd);
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
+		pte_free_kernel(NULL, pte_table);
+	}
 	put_page(virt_to_page(pmd));
 }
 
@@ -136,18 +149,32 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 			continue;
 		}
 
+		if (pud_huge(*pud)) {
+			/*
+			 * If we are dealing with a huge pud, just clear it and
+			 * move on.
+			 */
+			clear_pud_entry(kvm, pud, addr);
+			addr = pud_addr_end(addr, end);
+			continue;
+		}
+
 		pmd = pmd_offset(pud, addr);
 		if (pmd_none(*pmd)) {
 			addr = pmd_addr_end(addr, end);
 			continue;
 		}
 
-		pte = pte_offset_kernel(pmd, addr);
-		clear_pte_entry(kvm, pte, addr);
-		next = addr + PAGE_SIZE;
+		if (!kvm_pmd_huge(*pmd)) {
+			pte = pte_offset_kernel(pmd, addr);
+			clear_pte_entry(kvm, pte, addr);
+			next = addr + PAGE_SIZE;
+		}
 
-		/* If we emptied the pte, walk back up the ladder */
-		if (page_empty(pte)) {
+		/*
+		 * If the pmd entry is to be cleared, walk back up the ladder
+		 */
+		if (kvm_pmd_huge(*pmd) || page_empty(pte)) {
 			clear_pmd_entry(kvm, pmd, addr);
 			next = pmd_addr_end(addr, end);
 			if (page_empty(pmd) && !page_empty(pud)) {
@@ -420,29 +447,71 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
 	kvm->arch.pgd = NULL;
 }
 
-
-static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
-			  phys_addr_t addr, const pte_t *new_pte, bool iomap)
+static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
+			     phys_addr_t addr)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte, old_pte;
 
-	/* Create 2nd stage page table mapping - Level 1 */
 	pgd = kvm->arch.pgd + pgd_index(addr);
 	pud = pud_offset(pgd, addr);
 	if (pud_none(*pud)) {
 		if (!cache)
-			return 0; /* ignore calls from kvm_set_spte_hva */
+			return NULL;
 		pmd = mmu_memory_cache_alloc(cache);
 		pud_populate(NULL, pud, pmd);
 		get_page(virt_to_page(pud));
 	}
 
-	pmd = pmd_offset(pud, addr);
+	return pmd_offset(pud, addr);
+}
+
+static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
+			       *cache, phys_addr_t addr, const pmd_t *new_pmd)
+{
+	pmd_t *pmd, old_pmd;
+
+	pmd = stage2_get_pmd(kvm, cache, addr);
+	VM_BUG_ON(!pmd);
+
+	/*
+	 * Mapping in huge pages should only happen through a fault.  If a
+	 * page is merged into a transparent huge page, the individual
+	 * subpages of that huge page should be unmapped through MMU
+	 * notifiers before we get here.
+	 *
+	 * Merging of CompoundPages is not supported; they should become
+	 * splitting first, unmapped, merged, and mapped back in on-demand.
+	 */
+	VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
+
+	old_pmd = *pmd;
+	kvm_set_pmd(pmd, *new_pmd);
+	if (pmd_present(old_pmd))
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
+	else
+		get_page(virt_to_page(pmd));
+	return 0;
+}
+
+static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
+			  phys_addr_t addr, const pte_t *new_pte, bool iomap)
+{
+	pmd_t *pmd;
+	pte_t *pte, old_pte;
 
-	/* Create 2nd stage page table mapping - Level 2 */
+	/* Create stage-2 page table mapping - Level 1 */
+	pmd = stage2_get_pmd(kvm, cache, addr);
+	if (!pmd) {
+		/*
+		 * Ignore calls from kvm_set_spte_hva for unallocated
+		 * address ranges.
+		 */
+		return 0;
+	}
+
+	/* Create stage-2 page mappings - Level 2 */
 	if (pmd_none(*pmd)) {
 		if (!cache)
 			return 0; /* ignore calls from kvm_set_spte_hva */
@@ -507,16 +576,60 @@ out:
 	return ret;
 }
 
+static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
+{
+	pfn_t pfn = *pfnp;
+	gfn_t gfn = *ipap >> PAGE_SHIFT;
+
+	if (PageTransCompound(pfn_to_page(pfn))) {
+		unsigned long mask;
+		/*
+		 * The address we faulted on is backed by a transparent huge
+		 * page.  However, because we map the compound huge page and
+		 * not the individual tail page, we need to transfer the
+		 * refcount to the head page.  We have to be careful that the
+		 * THP doesn't start to split while we are adjusting the
+		 * refcounts.
+		 *
+		 * We are sure this doesn't happen, because mmu_notifier_retry
+		 * was successful and we are holding the mmu_lock, so if this
+		 * THP is trying to split, it will be blocked in the mmu
+		 * notifier before touching any of the pages, specifically
+		 * before being able to call __split_huge_page_refcount().
+		 *
+		 * We can therefore safely transfer the refcount from PG_tail
+		 * to PG_head and switch the pfn from a tail page to the head
+		 * page accordingly.
+		 */
+		mask = PTRS_PER_PMD - 1;
+		VM_BUG_ON((gfn & mask) != (pfn & mask));
+		if (pfn & mask) {
+			*ipap &= PMD_MASK;
+			kvm_release_pfn_clean(pfn);
+			pfn &= ~mask;
+			kvm_get_pfn(pfn);
+			*pfnp = pfn;
+		}
+
+		return true;
+	}
+
+	return false;
+}
+
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
-			  gfn_t gfn, struct kvm_memory_slot *memslot,
+			  struct kvm_memory_slot *memslot,
 			  unsigned long fault_status)
 {
-	pte_t new_pte;
-	pfn_t pfn;
 	int ret;
-	bool write_fault, writable;
+	bool write_fault, writable, hugetlb = false, force_pte = false;
 	unsigned long mmu_seq;
+	gfn_t gfn = fault_ipa >> PAGE_SHIFT;
+	unsigned long hva = gfn_to_hva(vcpu->kvm, gfn);
+	struct kvm *kvm = vcpu->kvm;
 	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
+	struct vm_area_struct *vma;
+	pfn_t pfn;
 
 	write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu));
 	if (fault_status == FSC_PERM && !write_fault) {
@@ -524,6 +637,26 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		return -EFAULT;
 	}
 
+	/* Let's check if we will get back a huge page backed by hugetlbfs */
+	down_read(&current->mm->mmap_sem);
+	vma = find_vma_intersection(current->mm, hva, hva + 1);
+	if (is_vm_hugetlb_page(vma)) {
+		hugetlb = true;
+		gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT;
+	} else {
+		/*
+		 * Pages belonging to VMAs not aligned to the PMD mapping
+		 * granularity cannot be mapped using block descriptors even
+		 * if the pages belong to a THP for the process, because the
+		 * stage-2 block descriptor will cover more than a single THP
+		 * and we loose atomicity for unmapping, updates, and splits
+		 * of the THP or other pages in the stage-2 block range.
+		 */
+		if (vma->vm_start & ~PMD_MASK)
+			force_pte = true;
+	}
+	up_read(&current->mm->mmap_sem);
+
 	/* We need minimum second+third level pages */
 	ret = mmu_topup_memory_cache(memcache, 2, KVM_NR_MEM_OBJS);
 	if (ret)
@@ -541,26 +674,40 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 */
 	smp_rmb();
 
-	pfn = gfn_to_pfn_prot(vcpu->kvm, gfn, write_fault, &writable);
+	pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable);
 	if (is_error_pfn(pfn))
 		return -EFAULT;
 
-	new_pte = pfn_pte(pfn, PAGE_S2);
-	coherent_icache_guest_page(vcpu->kvm, gfn);
-
-	spin_lock(&vcpu->kvm->mmu_lock);
-	if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
+	spin_lock(&kvm->mmu_lock);
+	if (mmu_notifier_retry(kvm, mmu_seq))
 		goto out_unlock;
-	if (writable) {
-		kvm_set_s2pte_writable(&new_pte);
-		kvm_set_pfn_dirty(pfn);
+	if (!hugetlb && !force_pte)
+		hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
+
+	if (hugetlb) {
+		pmd_t new_pmd = pfn_pmd(pfn, PAGE_S2);
+		new_pmd = pmd_mkhuge(new_pmd);
+		if (writable) {
+			kvm_set_s2pmd_writable(&new_pmd);
+			kvm_set_pfn_dirty(pfn);
+		}
+		coherent_icache_guest_page(kvm, hva & PMD_MASK, PMD_SIZE);
+		ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
+	} else {
+		pte_t new_pte = pfn_pte(pfn, PAGE_S2);
+		if (writable) {
+			kvm_set_s2pte_writable(&new_pte);
+			kvm_set_pfn_dirty(pfn);
+		}
+		coherent_icache_guest_page(kvm, hva, PAGE_SIZE);
+		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false);
 	}
-	stage2_set_pte(vcpu->kvm, memcache, fault_ipa, &new_pte, false);
+
 
 out_unlock:
-	spin_unlock(&vcpu->kvm->mmu_lock);
+	spin_unlock(&kvm->mmu_lock);
 	kvm_release_pfn_clean(pfn);
-	return 0;
+	return ret;
 }
 
 /**
@@ -629,7 +776,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 	memslot = gfn_to_memslot(vcpu->kvm, gfn);
 
-	ret = user_mem_abort(vcpu, fault_ipa, gfn, memslot, fault_status);
+	ret = user_mem_abort(vcpu, fault_ipa, memslot, fault_status);
 	if (ret == 0)
 		ret = 1;
 out_unlock:
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
index 86a693a02ba3..0881bf169fbc 100644
--- a/arch/arm/kvm/psci.c
+++ b/arch/arm/kvm/psci.c
@@ -18,6 +18,7 @@
 #include <linux/kvm_host.h>
 #include <linux/wait.h>
 
+#include <asm/cputype.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_psci.h>
 
@@ -34,22 +35,30 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
 static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 {
 	struct kvm *kvm = source_vcpu->kvm;
-	struct kvm_vcpu *vcpu;
+	struct kvm_vcpu *vcpu = NULL, *tmp;
 	wait_queue_head_t *wq;
 	unsigned long cpu_id;
+	unsigned long mpidr;
 	phys_addr_t target_pc;
+	int i;
 
 	cpu_id = *vcpu_reg(source_vcpu, 1);
 	if (vcpu_mode_is_32bit(source_vcpu))
 		cpu_id &= ~((u32) 0);
 
-	if (cpu_id >= atomic_read(&kvm->online_vcpus))
+	kvm_for_each_vcpu(i, tmp, kvm) {
+		mpidr = kvm_vcpu_get_mpidr(tmp);
+		if ((mpidr & MPIDR_HWID_BITMASK) == (cpu_id & MPIDR_HWID_BITMASK)) {
+			vcpu = tmp;
+			break;
+		}
+	}
+
+	if (!vcpu)
 		return KVM_PSCI_RET_INVAL;
 
 	target_pc = *vcpu_reg(source_vcpu, 2);
 
-	vcpu = kvm_get_vcpu(kvm, cpu_id);
-
 	wq = kvm_arch_vcpu_wq(vcpu);
 	if (!waitqueue_active(wq))
 		return KVM_PSCI_RET_INVAL;
@@ -62,6 +71,10 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 		vcpu_set_thumb(vcpu);
 	}
 
+	/* Propagate caller endianness */
+	if (kvm_vcpu_is_be(source_vcpu))
+		kvm_vcpu_set_be(vcpu);
+
 	*vcpu_pc(vcpu) = target_pc;
 	vcpu->arch.pause = false;
 	smp_mb();		/* Make sure the above is visible */
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index 71e08baee209..f558c073c023 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -30,16 +30,14 @@
 #include <kvm/arm_arch_timer.h>
 
 /******************************************************************************
- * Cortex-A15 Reset Values
+ * Cortex-A15 and Cortex-A7 Reset Values
  */
 
-static const int a15_max_cpu_idx = 3;
-
-static struct kvm_regs a15_regs_reset = {
+static struct kvm_regs cortexa_regs_reset = {
 	.usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT,
 };
 
-static const struct kvm_irq_level a15_vtimer_irq = {
+static const struct kvm_irq_level cortexa_vtimer_irq = {
 	{ .irq = 27 },
 	.level = 1,
 };
@@ -58,23 +56,22 @@ static const struct kvm_irq_level a15_vtimer_irq = {
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	struct kvm_regs *cpu_reset;
+	struct kvm_regs *reset_regs;
 	const struct kvm_irq_level *cpu_vtimer_irq;
 
 	switch (vcpu->arch.target) {
+	case KVM_ARM_TARGET_CORTEX_A7:
 	case KVM_ARM_TARGET_CORTEX_A15:
-		if (vcpu->vcpu_id > a15_max_cpu_idx)
-			return -EINVAL;
-		cpu_reset = &a15_regs_reset;
+		reset_regs = &cortexa_regs_reset;
 		vcpu->arch.midr = read_cpuid_id();
-		cpu_vtimer_irq = &a15_vtimer_irq;
+		cpu_vtimer_irq = &cortexa_vtimer_irq;
 		break;
 	default:
 		return -ENODEV;
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index aaf3a8731136..47d7338561de 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
@@ -49,5 +48,5 @@ $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
 ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
   NEON_FLAGS			:= -mfloat-abi=softfp -mfpu=neon
   CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
-  lib-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
+  obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
 endif
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index d6408d1ee543..e0c68d5bb7dc 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -10,6 +10,11 @@ UNWIND(	.fnstart	)
 	and	r3, r0, #31		@ Get bit offset
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
+#if __LINUX_ARM_ARCH__ >= 7
+	.arch_extension	mp
+	ALT_SMP(W(pldw)	[r1])
+	ALT_UP(W(nop))
+#endif
 	mov	r3, r2, lsl r3
 1:	ldrex	r2, [r1]
 	\instr	r2, r2, r3
diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c
deleted file mode 100644
index 824253948f51..000000000000
--- a/arch/arm/lib/io-shark.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-shark.c
- *
- *  by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 025f742dd4df..3e58d710013c 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -18,6 +18,7 @@
 #include <linux/hardirq.h> /* for in_atomic() */
 #include <linux/gfp.h>
 #include <linux/highmem.h>
+#include <linux/hugetlb.h>
 #include <asm/current.h>
 #include <asm/page.h>
 
@@ -40,7 +41,35 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 		return 0;
 
 	pmd = pmd_offset(pud, addr);
-	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+	if (unlikely(pmd_none(*pmd)))
+		return 0;
+
+	/*
+	 * A pmd can be bad if it refers to a HugeTLB or THP page.
+	 *
+	 * Both THP and HugeTLB pages have the same pmd layout
+	 * and should not be manipulated by the pte functions.
+	 *
+	 * Lock the page table for the destination and check
+	 * to see that it's still huge and whether or not we will
+	 * need to fault on write, or if we have a splitting THP.
+	 */
+	if (unlikely(pmd_thp_or_huge(*pmd))) {
+		ptl = &current->mm->page_table_lock;
+		spin_lock(ptl);
+		if (unlikely(!pmd_thp_or_huge(*pmd)
+			|| pmd_hugewillfault(*pmd)
+			|| pmd_trans_splitting(*pmd))) {
+			spin_unlock(ptl);
+			return 0;
+		}
+
+		*ptep = NULL;
+		*ptlp = ptl;
+		return 1;
+	}
+
+	if (unlikely(pmd_bad(*pmd)))
 		return 0;
 
 	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
@@ -94,7 +123,10 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 		from += tocopy;
 		n -= tocopy;
 
-		pte_unmap_unlock(pte, ptl);
+		if (pte)
+			pte_unmap_unlock(pte, ptl);
+		else
+			spin_unlock(ptl);
 	}
 	if (!atomic)
 		up_read(&current->mm->mmap_sem);
@@ -147,7 +179,10 @@ __clear_user_memset(void __user *addr, unsigned long n)
 		addr += tocopy;
 		n -= tocopy;
 
-		pte_unmap_unlock(pte, ptl);
+		if (pte)
+			pte_unmap_unlock(pte, ptl);
+		else
+			spin_unlock(ptl);
 	}
 	up_read(&current->mm->mmap_sem);
 
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index f485e5a2af4b..2c40aeab3eaa 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -9,6 +9,9 @@
  */
 
 #include <linux/raid/xor.h>
+#include <linux/module.h>
+
+MODULE_LICENSE("GPL");
 
 #ifndef __ARM_NEON__
 #error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
@@ -40,3 +43,4 @@ struct xor_block_template const xor_block_neon_inner = {
 	.do_4	= xor_8regs_4,
 	.do_5	= xor_8regs_5,
 };
+EXPORT_SYMBOL(xor_block_neon_inner);
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3b0a9538093c..c1b737097c95 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -98,7 +98,6 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
-obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 4aad93d54d6f..25805f2f6010 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -327,6 +328,7 @@ static void __init at91rm9200_ioremap_registers(void)
 {
 	at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
 	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
+	at91_pm_set_standby(at91rm9200_standby);
 }
 
 static void __init at91rm9200_initialize(void)
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 180b3024bec3..f607deb40f4d 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5de6074b4f4f..f8629a3fa245 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -28,6 +28,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -342,6 +343,7 @@ static void __init at91sam9260_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9260_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 0e0793241ab7..1f3867a17a28 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -284,6 +285,7 @@ static void __init at91sam9261_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9261_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 629ea5fc95cf..b2a34740146a 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -465,7 +465,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -498,7 +498,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -559,7 +559,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6ce7d1850893..90d455d294a1 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -321,6 +322,7 @@ static void __init at91sam9263_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 	at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9263_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 858c8aac2daf..4aeadddbc181 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -832,7 +832,7 @@ void __init at91_add_device_can(struct at91_can_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -859,7 +859,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -891,7 +891,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 3a4bc2e1a65e..bb392320a0dd 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 474ee04d24b9..e9bf0b8f40eb 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -370,6 +371,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
+	at91_pm_set_standby(at91_ddr_standby);
 }
 
 static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index acb703e13331..cb36fa872d30 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -965,7 +965,7 @@ void __init at91_add_device_isi(struct isi_platform_data *data,
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -991,7 +991,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -1037,7 +1037,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 721a1a34dd1d..c40c1e2ef80f 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index c7d670d11802..2d895a297739 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d4ec0d9a9872..88995af09c04 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -287,6 +288,7 @@ static void __init at91sam9rl_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9rl_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 352468f265a9..a698bdab2cce 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -498,7 +498,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -525,7 +525,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -557,7 +557,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 2919eba41ff4..c0e637adf65d 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index ade948b82662..112e867c4abe 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -112,7 +112,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata macb_platform_data cam60_macb_data = {
+static struct macb_platform_data cam60_macb_data __initdata = {
 	.phy_irq_pin	= AT91_PIN_PB5,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3fcb6623a33e..3a185faee795 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,7 +14,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -36,11 +35,6 @@ static void __init at91rm9200_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91rm9200_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91rm9200_dt_board_compat[] __initdata = {
 	"atmel,at91rm9200",
 	NULL
@@ -52,6 +46,5 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
 	.init_irq	= at91rm9200_dt_init_irq,
-	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 8db30132abed..3dab868b02fa 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,7 +13,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -37,11 +36,6 @@ static void __init at91_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -54,6 +48,5 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
 	.init_irq	= at91_dt_init_irq,
-	.init_machine	= at91_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index ad95f6a23a28..bf00d15d954d 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy)
 {
 	int value;
 
-#define GMII_RCCPSR	260
-#define GMII_RRDPSR	261
-#define GMII_ERCR	11
-#define GMII_ERDWR	12
-
 	/* Set delay values */
-	value = GMII_RCCPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0xF2F4;
-	phy_write(phy, GMII_ERDWR, value);
-	value = GMII_RRDPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
+	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0x2222;
-	phy_write(phy, GMII_ERDWR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d3437624ca4e..473546b9408b 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -389,7 +389,7 @@ static struct fb_monspecs at91fb_default_stn_monspecs = {
 					| ATMEL_LCDC_IFWIDTH_4 \
 					| ATMEL_LCDC_SCANMOD_SINGLE)
 
-static void at91_lcdc_stn_power_control(int on)
+static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	/* backlight */
 	if (on) {	/* power up */
@@ -401,7 +401,7 @@ static void at91_lcdc_stn_power_control(int on)
 	}
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.default_bpp			= 1,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9261_DEFAULT_STN_LCDCON2,
@@ -445,7 +445,7 @@ static struct fb_monspecs at91fb_default_tft_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT    \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_tft_power_control(int on)
+static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
@@ -453,7 +453,7 @@ static void at91_lcdc_tft_power_control(int on)
 		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -465,7 +465,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 #endif
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3284df05df14..8b4942cbb6d9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -275,13 +275,13 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	at91_set_gpio_value(AT91_PIN_PA30, on);
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -292,7 +292,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2a94896a1375..ef39078c8ce2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -284,7 +284,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 32,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -295,7 +295,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index aa265dcf2128..604eecf6cd70 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -170,7 +170,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
@@ -179,7 +179,7 @@ static void at91_lcdc_power_control(int on)
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -191,7 +191,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3aaa9784cf0e..f1d49e929ccb 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -26,7 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 4a234fb2ab3b..6c08b341167d 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -107,8 +107,8 @@ extern void __init at91_add_device_pwm(u32 mask);
 extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
 
  /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+struct atmel_lcdfb_pdata;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
 
  /* AC97 */
 extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
deleted file mode 100644
index 4ec6a6d9b9be..000000000000
--- a/arch/arm/mach-at91/cpuidle.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * based on arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle support for AT91 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and RAM self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and RAM self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/cpu.h>
-
-#include "pm.h"
-
-#define AT91_MAX_STATES	2
-
-/* Actual code that puts the SoC in different idle states */
-static int at91_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			       int index)
-{
-	if (cpu_is_at91rm9200())
-		at91rm9200_standby();
-	else if (cpu_is_at91sam9g45())
-		at91sam9g45_standby();
-	else if (cpu_is_at91sam9263())
-		at91sam9263_standby();
-	else
-		at91sam9_standby();
-
-	return index;
-}
-
-static struct cpuidle_driver at91_idle_driver = {
-	.name			= "at91_idle",
-	.owner			= THIS_MODULE,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= at91_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 10000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "RAM_SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = AT91_MAX_STATES,
-};
-
-/* Initialize CPU idle by registering the idle states */
-static int __init at91_init_cpuidle(void)
-{
-	return cpuidle_register(&at91_idle_driver, NULL);
-}
-
-device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 048a57f76bd3..c287307b9a3b 100644
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -60,14 +60,48 @@
 #define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
 #define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
 #define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+#define		AT91_ADC_IER_PEN	(1 << 29)
+#define		AT91_ADC_IER_NOPEN	(1 << 30)
+#define		AT91_ADC_IER_XRDY	(1 << 20)
+#define		AT91_ADC_IER_YRDY	(1 << 21)
+#define		AT91_ADC_IER_PRDY	(1 << 22)
+#define		AT91_ADC_ISR_PENS	(1 << 31)
 
 #define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
 #define		AT91_ADC_DATA		(0x3ff)
 
 #define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
 
+#define AT91_ADC_ACR		0x94	/* Analog Control Register */
+#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
+
+#define AT91_ADC_TSMR		0xB0
+#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
+#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
+#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
+#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
+#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
+#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
+#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
+#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
+#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
+#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR	0xB4
+#define AT91_ADC_TSYPOSR	0xB8
+#define AT91_ADC_TSPRESSR	0xBC
+
 #define AT91_ADC_TRGR_9260	AT91_ADC_MR
 #define AT91_ADC_TRGR_9G45	0x08
 #define AT91_ADC_TRGR_9X5	0xC0
 
+/* Trigger Register bit field */
+#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
+#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
+#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
+#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
+
 #endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a832e0707611..f17aa3150019 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -33,6 +33,7 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
+#include <mach/sama5d3.h>
 
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
index 6dc81ee38048..31096a8aaf1d 100644
--- a/arch/arm/mach-at91/include/mach/sama5d3.h
+++ b/arch/arm/mach-at91/include/mach/sama5d3.h
@@ -65,6 +65,14 @@
 #define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
 
 /*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D3_BASE_USART0	0xf001c000
+#define SAMA5D3_BASE_USART1	0xf0020000
+#define SAMA5D3_BASE_USART2	0xf8020000
+#define SAMA5D3_BASE_USART3	0xf8024000
+
+/*
  * Internal Memory
  */
 #define SAMA5D3_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 5659f7c72120..4bb644f8e87c 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -94,6 +94,15 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
+static const u32 uarts_sama5[] = {
+	AT91_BASE_DBGU1,
+	SAMA5D3_BASE_USART0,
+	SAMA5D3_BASE_USART1,
+	SAMA5D3_BASE_USART2,
+	SAMA5D3_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@@ -121,8 +130,12 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9RL64:
 		return uarts_sam9rl;
 
+	case ARCH_ID_AT91SAM9N12:
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;
+
+	case ARCH_ID_SAMA5D3:
+		return uarts_sama5;
 	}
 
 	/* at91sam9g10 */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 15afb5d9271f..9986542e8060 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,8 @@
 #include "at91_rstc.h"
 #include "at91_shdwc.h"
 
+static void (*at91_pm_standby)(void);
+
 static void __init show_reset_status(void)
 {
 	static char reset[] __initdata = "reset";
@@ -266,14 +268,8 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			if (cpu_is_at91rm9200())
-				at91rm9200_standby();
-			else if (cpu_is_at91sam9g45())
-				at91sam9g45_standby();
-			else if (cpu_is_at91sam9263())
-				at91sam9263_standby();
-			else
-				at91sam9_standby();
+			if (at91_pm_standby)
+				at91_pm_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -314,6 +310,18 @@ static const struct platform_suspend_ops at91_pm_ops = {
 	.end	= at91_pm_end,
 };
 
+static struct platform_device at91_cpuidle_device = {
+	.name = "cpuidle-at91",
+};
+
+void at91_pm_set_standby(void (*at91_standby)(void))
+{
+	if (at91_standby) {
+		at91_cpuidle_device.dev.platform_data = at91_standby;
+		at91_pm_standby = at91_standby;
+	}
+}
+
 static int __init at91_pm_init(void)
 {
 #ifdef CONFIG_AT91_SLOW_CLOCK
@@ -325,6 +333,9 @@ static int __init at91_pm_init(void)
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
 	if (cpu_is_at91rm9200())
 		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	
+	if (at91_cpuidle_device.dev.platform_data)
+		platform_device_register(&at91_cpuidle_device);
 
 	suspend_set_ops(&at91_pm_ops);
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 2f5908f0b8c5..3ed190ce062b 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -11,9 +11,13 @@
 #ifndef __ARCH_ARM_MACH_AT91_PM
 #define __ARCH_ARM_MACH_AT91_PM
 
+#include <asm/proc-fns.h>
+
 #include <mach/at91_ramc.h>
 #include <mach/at91rm9200_sdramc.h>
 
+extern void at91_pm_set_standby(void (*at91_standby)(void));
+
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
  * terminate self-refresh automatically on the next SDRAM access.
@@ -45,16 +49,18 @@ static inline void at91rm9200_standby(void)
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9g45_standby(void)
+static inline void at91_ddr_standby(void)
 {
 	/* Those two values allow us to delay self-refresh activation
 	 * to the maximum. */
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
@@ -62,25 +68,29 @@ static inline void at91sam9g45_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9263_standby(void)
+static inline void at91sam9_sdram_standby(void)
 {
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
-	lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
@@ -88,27 +98,14 @@ static inline void at91sam9263_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-static inline void at91sam9_standby(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
-			AT91_SDRAMC_LPCB_SELF_REFRESH);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
 #endif
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index b17fbcf4d9e8..094b3459c288 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -23,6 +23,7 @@
 #include "at91_shdwc.h"
 #include "soc.h"
 #include "generic.h"
+#include "pm.h"
 
 struct at91_init_soc __initdata at91_boot_soc;
 
@@ -376,15 +377,16 @@ static void at91_dt_rstc(void)
 }
 
 static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-sdramc" },
-	{ .compatible = "atmel,at91sam9260-sdramc" },
-	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
+	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
+	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
 	{ /*sentinel*/ }
 };
 
 static void at91_dt_ramc(void)
 {
 	struct device_node *np;
+	const struct of_device_id *of_id;
 
 	np = of_find_matching_node(NULL, ramc_ids);
 	if (!np)
@@ -396,6 +398,12 @@ static void at91_dt_ramc(void)
 	/* the controller may have 2 banks */
 	at91_ramc_base[1] = of_iomap(np, 1);
 
+	of_id = of_match_node(ramc_ids, np);
+	if (!of_id)
+		pr_warn("AT91: ramc no standby function available\n");
+	else
+		at91_pm_set_standby(of_id->data);
+
 	of_node_put(np);
 }
 
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index f11289519c39..9fe6d88737ed 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,5 +1,16 @@
 config ARCH_BCM
-	bool "Broadcom SoC" if ARCH_MULTI_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTIPLATFORM
+	help
+	  This enables support for Broadcom ARM based SoC
+          chips
+
+if ARCH_BCM
+
+menu "Broadcom SoC Selection"
+
+config ARCH_BCM_MOBILE
+	bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
@@ -9,11 +20,17 @@ config ARCH_BCM
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_TIME
-	select GPIO_BCM
+	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
+	select CACHE_L2X0
+	select HAVE_ARM_ARCH_TIMER
 	help
-	  This enables support for system based on Broadcom SoCs.
+	  This enables support for systems based on Broadcom mobile SoCs.
 	  It currently supports the 'BCM281XX' family, which includes
 	  BCM11130, BCM11140, BCM11351, BCM28145 and
 	  BCM28155 variants.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 6adb6aecf48f..c2ccd5a0f772 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012 Broadcom Corporation
+# Copyright (C) 2012-2013 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -10,6 +10,6 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM)		:= board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
+obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 56d9d19b2470..5e31e918f325 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -36,18 +36,20 @@ struct bcm_kona_smc_data {
 };
 
 static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
-	{.compatible = "bcm,kona-smc"},
+	{.compatible = "brcm,kona-smc"},
+	{.compatible = "bcm,kona-smc"}, /* deprecated name */
 	{},
 };
 
 /* Map in the bounce area */
-void __init bcm_kona_smc_init(void)
+int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
-	BUG_ON(!node);
+	if (!node)
+		return -ENODEV;
 
 	/* Don't care about size or flags of the DT node */
 	bridge_data.buffer_addr =
@@ -59,7 +61,9 @@ void __init bcm_kona_smc_init(void)
 
 	bridge_data.initialized = 1;
 
-	pr_info("Secure API initialized!\n");
+	pr_info("Kona Secure API initialized\n");
+
+	return 0;
 }
 
 /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
index 3bedbed1c21b..d098a7e76744 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.h
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -64,7 +64,7 @@
 #define SSAPI_BRCM_START_VC_CORE	0x0E000008
 
 #ifndef	__ASSEMBLY__
-extern void bcm_kona_smc_init(void);
+extern int __init bcm_kona_smc_init(void);
 
 extern unsigned bcm_kona_smc(unsigned service_id,
 			     unsigned arg0,
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 28599326d4ad..cb3dc364405c 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2012-2013 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -21,23 +21,39 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 
-
 #include "bcm_kona_smc.h"
+#include "kona.h"
 
 static int __init kona_l2_cache_init(void)
 {
 	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
 		return 0;
 
+	if (bcm_kona_smc_init() < 0) {
+		pr_info("Kona secure API not available. Skipping L2 init\n");
+		return 0;
+	}
+
 	bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
 
 	/*
 	 * The aux_val and aux_mask have no effect since L2 cache is already
 	 * enabled.  Pass 0s for aux_val and 1s for aux_mask for default value.
 	 */
-	l2x0_of_init(0, ~0);
+	return l2x0_of_init(0, ~0);
+}
 
-	return 0;
+static void bcm_board_setup_restart(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
+	if (np) {
+		if (of_device_is_available(np))
+			bcm_kona_setup_restart();
+		of_node_put(np);
+	}
+	/* Restart setup for other boards goes here */
 }
 
 static void __init board_init(void)
@@ -45,15 +61,14 @@ static void __init board_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL,
 		&platform_bus);
 
-	bcm_kona_smc_init();
-
+	bcm_board_setup_restart();
 	kona_l2_cache_init();
 }
 
-static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
+static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
 
-DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_time = clocksource_of_init,
+DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
 	.init_machine = board_init,
+	.restart = bcm_kona_restart,
 	.dt_compat = bcm11351_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
new file mode 100644
index 000000000000..6939d9017f63
--- /dev/null
+++ b/arch/arm/mach-bcm/kona.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_address.h>
+#include <asm/io.h>
+
+#include "kona.h"
+
+static void __iomem *watchdog_base;
+
+void bcm_kona_setup_restart(void)
+{
+	struct device_node *np_wdog;
+
+	/*
+	 * The assumption is that whoever calls bcm_kona_setup_restart()
+	 * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
+	 * report an error if the DT entry is missing.
+	 */
+	np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+	if (!np_wdog) {
+		pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
+		return;
+	}
+	watchdog_base = of_iomap(np_wdog, 0);
+	WARN(!watchdog_base, "failed to map watchdog base");
+	of_node_put(np_wdog);
+}
+
+#define SECWDOG_OFFSET			0x00000000
+#define SECWDOG_RESERVED_MASK		0xE2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK	0x10000000
+#define SECWDOG_EN_MASK			0x08000000
+#define SECWDOG_SRSTEN_MASK		0x04000000
+#define SECWDOG_CLKS_SHIFT		20
+#define SECWDOG_LOCK_SHIFT		0
+
+void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
+{
+	uint32_t val;
+
+	if (!watchdog_base)
+		panic("Watchdog not mapped. Reboot failed.\n");
+
+	/* Enable watchdog2 with very short timeout. */
+	val = readl(watchdog_base + SECWDOG_OFFSET);
+	val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+	val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+		(0x8 << SECWDOG_CLKS_SHIFT) |
+		(0x8 << SECWDOG_LOCK_SHIFT);
+	writel(val, watchdog_base + SECWDOG_OFFSET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
new file mode 100644
index 000000000000..291eca3e06ff
--- /dev/null
+++ b/arch/arm/mach-bcm/kona.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/reboot.h>
+
+void bcm_kona_setup_restart(void);
+void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index 40686d7ef500..70f2f3925f0e 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -14,11 +14,10 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/irqchip/bcm2835.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -131,10 +130,8 @@ static const char * const bcm2835_compat[] = {
 
 DT_MACHINE_START(BCM2835, "BCM2835")
 	.map_io = bcm2835_map_io,
-	.init_irq = bcm2835_init_irq,
-	.handle_irq = bcm2835_handle_irq,
+	.init_irq = irqchip_init,
 	.init_machine = bcm2835_init,
-	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 01ad4d41e728..bea6295c8c59 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -33,9 +33,6 @@ config ARCH_P720T
 	  Say Y here if you intend to run this kernel on the ARM Prospector
 	  720T.
 
-config ARCH_FORTUNET
-	bool "FORTUNET"
-
 config EP72XX_ROM_BOOT
 	bool "EP721x/EP731x ROM boot"
 	help
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f30ed2b496fb..f04151efd96a 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
-obj-$(CONFIG_ARCH_FORTUNET)	+= board-fortunet.o
 obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 5867aebd8d0c..f8d71a89644a 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -259,11 +259,7 @@ static void __init autcpu12_init(void)
 static void __init autcpu12_init_late(void)
 {
 	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-
-	if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
-		/* We are need both drivers to handle NAND */
-		platform_device_register(&autcpu12_nand_pdev);
-	}
+	platform_device_register(&autcpu12_nand_pdev);
 }
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 9dfb990f0801..fe6184ead896 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = {
 	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
 };
 
-static struct map_desc edb7211_io_desc[] __initdata = {
-	{	/* Memory-mapped extra keyboard row */
-		.virtual	= IO_ADDRESS(EDB7211_EXTKBD_BASE),
-		.pfn		= __phys_to_pfn(EDB7211_EXTKBD_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init edb7211_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
 /* Reserve screen memory region at the start of main system memory. */
 static void __init edb7211_reserve(void)
 {
@@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
-	.map_io		= edb7211_map_io,
+	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
deleted file mode 100644
index b1561e3d7c5c..000000000000
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/fortunet.c
- *
- *  Derived from linux/arch/arm/mach-integrator/arch.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include <asm/memory.h>
-
-#include "common.h"
-
-struct meminfo memmap = {
-	.nr_banks	= 1,
-	.bank		= {
-		{
-			.start	= 0xC0000000,
-			.size	= 0x01000000,
-		},
-	},
-};
-
-typedef struct tag_IMAGE_PARAMS
-{
-	int	ramdisk_ok;
-	int	ramdisk_address;
-	int	ramdisk_size;
-	int	ram_size;
-	int	extra_param_type;
-	int	extra_param_ptr;
-	int	command_line;
-} IMAGE_PARAMS;
-
-#define IMAGE_PARAMS_PHYS	0xC01F0000
-
-static void __init
-fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
-	*cmdline = phys_to_virt(ip->command_line);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if(ip->ramdisk_ok)
-	{
-		initrd_start = __phys_to_virt(ip->ramdisk_address);
-		initrd_end = initrd_start + ip->ramdisk_size;
-	}
-#endif
-	memmap.bank[0].size = ip->ram_size;
-	*mi = memmap;
-}
-
-MACHINE_START(FORTUNET, "ARM-FortuNet")
-	/* Maintainer: FortuNet Inc. */
-	.nr_irqs	= CLPS711X_NR_IRQS,
-	.fixup		= fortunet_fixup,
-	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.handle_irq	= clps711x_handle_irq,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 4ca2f3ca2de4..134641d688bb 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -29,12 +29,12 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/clk-provider.h>
+#include <linux/sched_clock.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/sched_clock.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 856b81cf2f8a..fb77d1448fec 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void)
 	unsigned i;
 
 	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("clps711x-syscon", i + 1,
+		platform_device_register_simple("syscon", i + 1,
 						&clps711x_syscon_res[i], 1);
 }
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index e026b19b23ea..a075b3e0c5c7 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -40,7 +40,6 @@ config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
-	select CPU_FREQ_TABLE
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 1332de8c52c9..40f15f133c55 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -22,17 +22,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
@@ -74,7 +76,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
 	if (handler != NULL) {
 		da830_evm_usb_ocic_handler = handler;
 
-		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+		error = request_irq(irq, da830_evm_usb_ocic_irq,
 				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    "OHCI over-current indicator", NULL);
 		if (error)
@@ -185,10 +187,6 @@ static __init void da830_evm_usb_init(void)
 			   __func__, ret);
 }
 
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short da830_evm_mcasp1_pins[] = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
 	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -595,6 +593,10 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da830_register_gpio();
+	if (ret)
+		pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
 	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
@@ -630,7 +632,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	davinci_serial_init(&da830_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 9f09f45835f8..df16cb88a26b 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -19,7 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/input/tps6507x-ts.h>
 #include <linux/mfd/tps6507x.h>
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
@@ -38,6 +39,7 @@
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -746,10 +748,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -1441,6 +1439,10 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	ret = pmic_tps65070_init();
 	if (ret)
 		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
@@ -1492,7 +1494,7 @@ static __init void da850_evm_init(void)
 				__func__, ret);
 	}
 
-	davinci_serial_init(&da850_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index c2a0a67d09e0..ecdc7d44fa70 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -22,15 +22,17 @@
 #include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
+#include <mach/common.h>
 
 #include "davinci.h"
 
@@ -314,10 +316,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_evm_map_io(void)
 {
 	dm355_init();
@@ -379,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = {
 static __init void dm355_evm_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(1, "dm9000");
 	gpio_direction_input(1);
@@ -393,7 +396,7 @@ static __init void dm355_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 139e42da25f0..43bacbf15314 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -19,15 +19,16 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
+#include <mach/common.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -173,10 +174,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_leopard_map_io(void)
 {
 	dm355_init();
@@ -238,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 static __init void dm355_leopard_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(9, "dm9000");
 	gpio_direction_input(9);
@@ -252,7 +254,7 @@ static __init void dm355_leopard_init(void)
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));
 	leopard_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 4cdb61c54459..f4a6c18912ea 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 
@@ -718,10 +718,6 @@ fail:
 	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm365_evm_map_io(void)
 {
 	dm365_init();
@@ -747,8 +743,14 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
 
 static __init void dm365_evm_init(void)
 {
+	int ret;
+
+	ret = dm365_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm365_serial_device);
 
 	dm365evm_emac_configure();
 	dm365evm_mmc_configure();
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index fa4bfaf952d8..9cc32c283b8b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -727,10 +727,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&rtc_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init
 davinci_evm_map_io(void)
 {
@@ -758,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 
 static __init void davinci_evm_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -792,7 +793,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	/* irlml6401 switches over 1A, in under 8 msec */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 0c005e876cac..44b20191a9fe 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -33,17 +33,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -750,10 +752,6 @@ static void __init davinci_map_io(void)
 	cdce_clk_init();
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
@@ -790,10 +788,15 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 9549d53aa63f..cd0f58730c2b 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -434,10 +434,6 @@ static void __init mityomapl138_setup_nand(void)
 				 ARRAY_SIZE(mityomapl138_devices));
 }
 
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short mityomap_mii_pins[] = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -517,7 +513,7 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warning("watchdog registration failed: %d\n", ret);
 
-	davinci_serial_init(&mityomapl138_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
 	if (ret)
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 808233b60e3d..bb680af98374 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -26,17 +26,18 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -154,10 +155,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = {
 	&ntosd2_leds_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_ntosd2_map_io(void)
 {
 	dm644x_init();
@@ -173,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 
 static __init void davinci_ntosd2_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -198,7 +200,7 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index b8c20de10ca2..2aac51d0e853 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -211,7 +213,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
 		hawk_usb_ocic_handler = handler;
 
 		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING,
 					"OHCI over-current indicator", NULL);
 		if (error)
@@ -286,15 +288,15 @@ usb11_setup_oc_fail:
 	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
-	davinci_serial_init(&omapl138_hawk_uart_config);
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
+	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 513eee14f77d..d84360148100 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -125,10 +125,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = {
 	&davinci_sffsdr_nandflash_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_sffsdr_map_io(void)
 {
 	dm644x_init();
@@ -141,7 +137,7 @@ static __init void davinci_sffsdr_init(void)
 	platform_add_devices(davinci_sffsdr_devices,
 			     ARRAY_SIZE(davinci_sffsdr_devices));
 	sffsdr_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
 	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index abbaf0270be6..0813b5167e05 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -20,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"tptc0",	&tptc0_clk),
 	CLK(NULL,		"tptc1",	&tptc1_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK(NULL,		"ecap0",	&ecap0_clk),
@@ -417,6 +417,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
@@ -1150,6 +1151,16 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+	.ngpio = 128,
+	.intc_irq_num = DA830_N_CP_INTC_IRQ,
+};
+
+int __init da830_register_gpio(void)
+{
+	return da8xx_register_gpio(&da830_gpio_platform_data);
+}
+
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
 		.base		= DA8XX_TIMER64P0_BASE,
@@ -1195,11 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index a0d4f6038b60..352984e1528a 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -28,7 +29,6 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -451,9 +451,9 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
 	CLK("pruss_uio",	"pruss",	&pruss_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
@@ -461,6 +461,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
@@ -1280,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+	.ngpio = 144,
+	.intc_irq_num = DA850_N_CP_INTC_IRQ,
+};
+
+int __init da850_register_gpio(void)
+{
+	return da8xx_register_gpio(&da850_gpio_platform_data);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -1297,11 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 961aea8bbad5..d2bc574ae172 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -20,13 +20,6 @@
 
 #define DA8XX_NUM_UARTS	3
 
-static void __init da8xx_uart_clk_enable(void)
-{
-	int i;
-	for (i = 0; i < DA8XX_NUM_UARTS; i++)
-		davinci_serial_setup_clk(i, NULL);
-}
-
 static struct of_device_id da8xx_irq_match[] __initdata = {
 	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
 	{ }
@@ -47,6 +40,12 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
+	OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+		       NULL),
 	{}
 };
 
@@ -57,7 +56,6 @@ static void __init da850_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     da850_auxdata_lookup, NULL);
 
-	da8xx_uart_clk_enable();
 }
 
 static const char *da850_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a883043d0820..2eebc4338802 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base;
 #define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
 void davinci_map_sysmod(void);
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+int davinci_gpio_register(struct resource *res, int size, void *pdata);
+
 /* DM355 base addresses */
 #define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
 #define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
@@ -92,11 +96,13 @@ void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
 int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
 void dm644x_init_asp(struct snd_platform_data *pdata);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
 void dm646x_init(void);
@@ -106,4 +112,10 @@ int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+int dm646x_gpio_register(void);
+
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
 #endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 71a46a348761..c46eccbbd512 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -68,7 +68,7 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
 	{
 		.mapbase	= DA8XX_UART0_BASE,
 		.irq		= IRQ_DA8XX_UARTINT0,
@@ -78,6 +78,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART1_BASE,
 		.irq		= IRQ_DA8XX_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -86,6 +91,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART2_BASE,
 		.irq		= IRQ_DA8XX_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -95,15 +105,33 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	},
 	{
 		.flags	= 0,
-	},
+	}
 };
 
-struct platform_device da8xx_serial_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM,
+		.dev	= {
+			.platform_data	= da8xx_serial0_pdata,
+		}
 	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM1,
+		.dev	= {
+			.platform_data	= da8xx_serial1_pdata,
+		}
+	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM2,
+		.dev	= {
+			.platform_data	= da8xx_serial2_pdata,
+		}
+	},
+	{
+	}
 };
 
 static s8 da8xx_queue_tc_mapping[][2] = {
@@ -453,12 +481,8 @@ int __init da8xx_register_emac(void)
 	ret = platform_device_register(&da8xx_mdio_device);
 	if (ret < 0)
 		return ret;
-	ret = platform_device_register(&da8xx_emac_device);
-	if (ret < 0)
-		return ret;
-	ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
-			    NULL, &da8xx_emac_device.dev);
-	return ret;
+
+	return platform_device_register(&da8xx_emac_device);
 }
 
 static struct resource da830_mcasp1_resources[] = {
@@ -641,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
 	return platform_device_register(&da8xx_lcdc_device);
 }
 
+static struct resource da8xx_gpio_resources[] = {
+	{ /* registers */
+		.start	= DA8XX_GPIO_BASE,
+		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{ /* interrupt */
+		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO8,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_gpio_device = {
+	.name		= "davinci_gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
+	.resource	= da8xx_gpio_resources,
+};
+
+int __init da8xx_register_gpio(void *pdata)
+{
+	da8xx_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_gpio_device);
+}
+
 static struct resource da8xx_mmcsd0_resources[] = {
 	{		/* registers */
 		.start	= DA8XX_MMCSD0_BASE,
@@ -828,14 +878,7 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
-	int ret;
-
-	ret = platform_device_register(&da8xx_rtc_device);
-	if (!ret)
-		/* Atleast on DA850, RTC is a wakeup source */
-		device_init_wakeup(&da8xx_rtc_device.dev, true);
-
-	return ret;
+	return platform_device_register(&da8xx_rtc_device);
 }
 
 static void __iomem *da8xx_ddr2_ctlr_base;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 128cb9ae80f4..01d8686e553c 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -126,7 +126,7 @@ static struct platform_device edma_device = {
 	.dev.platform_data = tnetv107x_edma_info,
 };
 
-static struct plat_serial8250_port serial_data[] = {
+static struct plat_serial8250_port serial0_platform_data[] = {
 	{
 		.mapbase	= TNETV107X_UART0_BASE,
 		.irq		= IRQ_TNETV107X_UART0,
@@ -137,6 +137,11 @@ static struct plat_serial8250_port serial_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port serial1_platform_data[] = {
+	{
 		.mapbase	= TNETV107X_UART1_BASE,
 		.irq		= IRQ_TNETV107X_UART1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -146,6 +151,11 @@ static struct plat_serial8250_port serial_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port serial2_platform_data[] = {
+	{
 		.mapbase	= TNETV107X_UART2_BASE,
 		.irq		= IRQ_TNETV107X_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -156,13 +166,28 @@ static struct plat_serial8250_port serial_data[] = {
 	},
 	{
 		.flags	= 0,
-	},
+	}
 };
 
-struct platform_device tnetv107x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= serial_data,
+
+struct platform_device tnetv107x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev.platform_data	= serial0_platform_data,
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev.platform_data	= serial1_platform_data,
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev.platform_data	= serial2_platform_data,
+	},
+	{
+	}
 };
 
 static struct resource mmc0_resources[] = {
@@ -385,7 +410,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
 	platform_device_register(&tsc_device);
 
 	if (info->serial_config)
-		davinci_serial_init(info->serial_config);
+		davinci_serial_init(tnetv107x_serial_device);
 
 	for (i = 0; i < 2; i++)
 		if (info->mmc_config[i]) {
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 111573c0aad1..3996e98f52fb 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -318,6 +318,19 @@ static void davinci_init_wdt(void)
 	platform_device_register(&davinci_wdt_device);
 }
 
+static struct platform_device davinci_gpio_device = {
+	.name	= "davinci_gpio",
+	.id	= -1,
+};
+
+int davinci_gpio_register(struct resource *res, int size, void *pdata)
+{
+	davinci_gpio_device.resource = res;
+	davinci_gpio_device.num_resources = size;
+	davinci_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&davinci_gpio_device);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 86100d179694..ef9ff1fb6f52 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,8 +13,10 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -25,9 +27,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
-#include <linux/platform_data/edma.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -357,9 +356,9 @@ static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "clkout3", &clkout3_clk),
 	CLK(NULL, "arm", &arm_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
 	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
@@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = {
 	},
 };
 
+static struct resource dm355_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm355_gpio_register(void)
+{
+	return davinci_gpio_register(dm355_gpio_resources,
+				     sizeof(dm355_gpio_resources),
+				     &dm355_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -922,7 +945,7 @@ static struct davinci_timer_info dm355_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
+static struct plat_serial8250_port dm355_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -932,6 +955,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm355_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -940,6 +968,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm355_serial2_platform_data[] = {
+	{
 		.mapbase	= DM355_UART2_BASE,
 		.irq		= IRQ_DM355_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -948,16 +981,34 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm355_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm355_serial_platform_data,
+struct platform_device dm355_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm355_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm355_serial1_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm355_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm355 = {
@@ -977,11 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM355_GPIOBNK0,
-	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index dad28029ba9b..1511a0680f9a 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -19,6 +19,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -29,9 +32,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -455,8 +455,8 @@ static struct clk_lookup dm365_clks[] = {
 	CLK("vpss", "master", &vpss_master_clk),
 	CLK("vpss", "slave", &vpss_slave_clk),
 	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("da830-mmc.0", NULL, &mmcsd0_clk),
 	CLK("da830-mmc.1", NULL, &mmcsd1_clk),
@@ -477,6 +477,7 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "timer3", &timer3_clk),
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
 	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
@@ -697,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask,
 	platform_device_register(&dm365_spi0_device);
 }
 
+static struct resource dm365_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+	.gpio_unbanked	= 8,
+};
+
+int __init dm365_gpio_register(void)
+{
+	return davinci_gpio_register(dm365_gpio_resources,
+				     sizeof(dm365_gpio_resources),
+				     &dm365_gpio_platform_data);
+}
+
 static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -1041,7 +1068,7 @@ static struct davinci_timer_info dm365_timer_info = {
 
 #define DM365_UART1_BASE	(IO_PHYS + 0x106000)
 
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
+static struct plat_serial8250_port dm365_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -1051,6 +1078,11 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm365_serial1_platform_data[] = {
+	{
 		.mapbase	= DM365_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -1059,16 +1091,27 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm365_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm365_serial_platform_data,
+struct platform_device dm365_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm365_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm365_serial1_platform_data,
+		}
 	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm365 = {
@@ -1088,12 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM365_GPIO0,
-	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
-	.serial_dev		= &dm365_serial_device,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
@@ -1407,8 +1444,6 @@ static int __init dm365_init_devices(void)
 
 	platform_device_register(&dm365_mdio_device);
 	platform_device_register(&dm365_emac_device);
-	clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
-		      NULL, &dm365_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index a49d18246fe9..143a3217e8ef 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -23,7 +24,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -303,10 +303,11 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("vpss", "master", &vpss_master_clk),
 	CLK("vpss", "slave", &vpss_slave_clk),
 	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK("davinci-mcbsp", NULL, &asp_clk),
@@ -770,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = {
 	},
 };
 
+static struct resource dm644_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.ngpio		= 71,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm644x_gpio_register(void)
+{
+	return davinci_gpio_register(dm644_gpio_resources,
+				     sizeof(dm644_gpio_resources),
+				     &dm644_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -813,7 +838,7 @@ static struct davinci_timer_info dm644x_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -823,6 +848,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -831,6 +861,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART2_BASE,
 		.irq		= IRQ_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -839,16 +874,34 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm644x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm644x_serial_platform_data,
+struct platform_device dm644x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm644x_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm644x_serial1_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm644x_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm644x = {
@@ -868,11 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 71,
-	.gpio_irq		= IRQ_GPIOBNK0,
-	.serial_dev		= &dm644x_serial_device,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
@@ -923,8 +971,6 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
-		      NULL, &dm644x_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index d1259e80141b..2a73f299c1d0 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -24,7 +25,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -342,15 +342,16 @@ static struct clk_lookup dm646x_clks[] = {
 	CLK(NULL, "edma_tc1", &edma_tc1_clk),
 	CLK(NULL, "edma_tc2", &edma_tc2_clk),
 	CLK(NULL, "edma_tc3", &edma_tc3_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
 	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
 	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
 	CLK(NULL, "pwm1", &pwm1_clk),
 	CLK(NULL, "timer0", &timer0_clk),
@@ -747,6 +748,30 @@ static struct platform_device vpif_capture_dev = {
 	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
 };
 
+static struct resource dm646x_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.ngpio		= 43,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm646x_gpio_register(void)
+{
+	return davinci_gpio_register(dm646x_gpio_resources,
+				     sizeof(dm646x_gpio_resources),
+				     &dm646x_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -790,7 +815,7 @@ static struct davinci_timer_info dm646x_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -800,6 +825,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -808,6 +838,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART2_BASE,
 		.irq		= IRQ_DM646X_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -816,16 +851,34 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm646x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm646x_serial_platform_data,
+struct platform_device dm646x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm646x_serial0_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm646x_serial1_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm646x_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm646x = {
@@ -845,11 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 43, /* Only 33 usable */
-	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
-	.serial_dev		= &dm646x_serial_device,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
@@ -913,8 +961,6 @@ static int __init dm646x_init_devices(void)
 
 	platform_device_register(&dm646x_mdio_device);
 	platform_device_register(&dm646x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev),
-		      NULL, &dm646x_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index cce316b92c06..0b3c169758ed 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -72,7 +72,6 @@ struct davinci_soc_info {
 	unsigned			gpio_unbanked;
 	struct davinci_gpio_controller	*gpio_ctlrs;
 	int				gpio_ctlrs_num;
-	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 7b41a5e9bc31..39e58b48e826 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
 void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
+int da8xx_register_gpio(void *pdata);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem *da8xx_get_mem_ctlr(void);
@@ -110,8 +111,10 @@ int da850_register_vpif_capture
 void da8xx_restart(enum reboot_mode mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
+int da850_register_gpio(void);
+int da830_register_gpio(void);
 
-extern struct platform_device da8xx_serial_device;
+extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 1fdd1fd35448..000000000000
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_DAVINCI_GPIO_H
-#define	__DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de47e1e..000000000000
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
-		struct davinci_gpio_controller *ctlr;
-		u32				mask;
-
-		ctlr = __gpio_to_controller(gpio);
-
-		if (ctlr->set_data != ctlr->clr_data) {
-			mask = __gpio_mask(gpio);
-			if (value)
-				__raw_writel(mask, ctlr->set_data);
-			else
-				__raw_writel(mask, ctlr->clr_data);
-			return;
-		}
-	}
-
-	__gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock.  This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlr;
-
-	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
-		return __gpio_get_value(gpio);
-
-	ctlr = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* don't support the reverse mapping */
-	return -ENOSYS;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 62ad300440f5..ce402cd21fa0 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -37,13 +37,9 @@
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
 #ifndef __ASSEMBLY__
-struct davinci_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART0 */
-	unsigned int enabled_uarts;
-};
+#include <linux/platform_device.h>
 
-extern int davinci_serial_init(struct davinci_uart_config *);
-extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
+extern int davinci_serial_init(struct platform_device *);
 #endif
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 16314c64f755..494fcf5ccfe1 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -42,7 +42,6 @@
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {
-	struct davinci_uart_config	*serial_config;
 	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
 	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
 	struct matrix_keypad_platform_data *keypad_config;
@@ -50,7 +49,7 @@ struct tnetv107x_device_info {
 };
 
 extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
+extern struct platform_device tnetv107x_serial_device[];
 
 extern void tnetv107x_init(void);
 extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index f2625814c3c9..5e93a734c858 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -70,49 +70,36 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-/* Enable UART clock and obtain its rate */
-int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
+int __init davinci_serial_init(struct platform_device *serial_dev)
 {
-	char name[16];
+	int i, ret = 0;
+	struct device *dev;
+	struct plat_serial8250_port *p;
 	struct clk *clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct device *dev = &soc_info->serial_dev->dev;
-
-	sprintf(name, "uart%d", instance);
-	clk = clk_get(dev, name);
-	if (IS_ERR(clk)) {
-		pr_err("%s:%d: failed to get UART%d clock\n",
-					__func__, __LINE__, instance);
-		return PTR_ERR(clk);
-	}
-
-	clk_prepare_enable(clk);
-
-	if (rate)
-		*rate = clk_get_rate(clk);
-
-	return 0;
-}
-
-int __init davinci_serial_init(struct davinci_uart_config *info)
-{
-	int i, ret;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct device *dev = &soc_info->serial_dev->dev;
-	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; p->flags; i++, p++) {
-		if (!(info->enabled_uarts & (1 << i)))
-			continue;
+	for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
+		dev = &serial_dev[i].dev;
+		p = dev->platform_data;
 
-		ret = davinci_serial_setup_clk(i, &p->uartclk);
+		ret = platform_device_register(&serial_dev[i]);
 		if (ret)
 			continue;
 
+		clk = clk_get(dev, NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:%d: failed to get UART%d clock\n",
+			       __func__, __LINE__, i);
+			continue;
+		}
+
+		clk_prepare_enable(clk);
+
+		p->uartclk = clk_get_rate(clk);
+
 		if (!p->membase && p->mapbase) {
 			p->membase = ioremap(p->mapbase, SZ_4K);
 
@@ -125,6 +112,5 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
 		if (p->membase && p->type != PORT_AR7)
 			davinci_serial_reset(p);
 	}
-
-	return platform_device_register(soc_info->serial_dev);
+	return ret;
 }
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index f18928b073f5..8540dddf1fbd 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -25,7 +25,6 @@ struct gen_pool *sram_get_gen_pool(void)
 
 void *sram_alloc(size_t len, dma_addr_t *dma)
 {
-	unsigned long vaddr;
 	dma_addr_t dma_base = davinci_soc_info.sram_dma;
 
 	if (dma)
@@ -33,13 +32,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma)
 	if (!sram_pool || (dma && !dma_base))
 		return NULL;
 
-	vaddr = gen_pool_alloc(sram_pool, len);
-	if (!vaddr)
-		return NULL;
-
-	if (dma)
-		*dma = gen_pool_virt_to_phys(sram_pool, vaddr);
-	return (void *)vaddr;
+	return gen_pool_dma_alloc(sram_pool, len, dma);
 
 }
 EXPORT_SYMBOL(sram_alloc);
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 7a55b5c95971..56c6eb5266ad 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -181,7 +181,7 @@ static struct timer_s timers[] = {
 		.name      = "clockevent",
 		.opts      = TIMER_OPTS_DISABLED,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = timer_interrupt,
 		}
 	},
@@ -190,7 +190,7 @@ static struct timer_s timers[] = {
 		.period     = ~0,
 		.opts       = TIMER_OPTS_PERIODIC,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = freerun_interrupt,
 		}
 	},
@@ -331,7 +331,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device clockevent_davinci = {
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
 	.set_mode	= davinci_set_mode,
 };
@@ -397,14 +396,10 @@ void __init davinci_timer_init(void)
 
 	/* setup clockevent */
 	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
-					 clockevent_davinci.shift);
-	clockevent_davinci.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_davinci);
+	clockevents_config_and_register(&clockevent_davinci,
+					davinci_clock_tick_rate, 1, 0xfffffffe);
 
 	for (i=0; i< ARRAY_SIZE(timers); i++)
 		timer32_config(&timers[i]);
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 4545667ecd3c..f4d7fbb24b3b 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -264,7 +264,7 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
 	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
 	CLK(NULL,		"clk_rom",		&clk_rom),
-	CLK(NULL,		"uart2",		&clk_uart2),
+	CLK("serial8250.2",     NULL,			&clk_uart2),
 	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
 	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
 	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
@@ -274,8 +274,8 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_gpio",		&clk_gpio),
 	CLK(NULL,		"clk_mdio",		&clk_mdio),
 	CLK("dm6441-mmc.0",	NULL,			&clk_sdio0),
-	CLK(NULL,		"uart0",		&clk_uart0),
-	CLK(NULL,		"uart1",		&clk_uart1),
+	CLK("serial8250.0",	NULL,			&clk_uart0),
+	CLK("serial8250.1",	NULL,			&clk_uart1),
 	CLK(NULL,		"timer0",		&clk_timer0),
 	CLK(NULL,		"timer1",		&clk_timer1),
 	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
@@ -757,7 +757,7 @@ static struct davinci_soc_info tnetv107x_soc_info = {
 	.gpio_type		= GPIO_TYPE_TNETV107X,
 	.gpio_num		= TNETV107X_N_GPIO,
 	.timer_info		= &timer_info,
-	.serial_dev		= &tnetv107x_serial_device,
+	.serial_dev		= tnetv107x_serial_device,
 };
 
 void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index dff7b2fd4e20..0bc7cdf8cf46 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -23,6 +23,8 @@ config MACH_CM_A510
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
 	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 4d9d2ffc4535..cbc5c0618788 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,5 +1,5 @@
-obj-y				+= common.o irq.o
-obj-$(CONFIG_DOVE_LEGACY)	+= mpp.o
+obj-y				+= common.o
+obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index f3755ac81148..49fa9abd09da 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -12,50 +12,13 @@
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/usb-ehci-orion.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
+#include <mach/dove.h>
 #include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/irq.h>
 #include "common.h"
 
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-					 "marvell,dove-gating-clock");
-	struct of_phandle_args clkspec;
-
-	clkspec.np = np;
-	clkspec.args_count = 1;
-
-	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_of_clk_init(void)
-{
-	of_clk_init(NULL);
-	dove_legacy_clk_init();
-}
-
-static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
 static void __init dove_dt_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
@@ -63,15 +26,7 @@ static void __init dove_dt_init(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_wins();
-
-	/* Setup root of clk tree */
-	dove_of_clk_init();
-
-	/* Internal devices not ported to DT yet */
-	dove_ge00_init(&dove_dt_ge00_data);
-	dove_pcie_init(1, 1);
-
+	BUG_ON(mvebu_mbus_dt_init());
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -82,9 +37,6 @@ static const char * const dove_dt_board_compat[] = {
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= dove_timer_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 304f069ebf50..c122bcff9f7c 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -27,6 +27,22 @@
 #include <plat/time.h>
 #include "common.h"
 
+/* These can go away once Dove uses the mvebu-mbus DT binding */
+#define DOVE_MBUS_PCIE0_MEM_TARGET    0x4
+#define DOVE_MBUS_PCIE0_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE0_IO_TARGET     0x4
+#define DOVE_MBUS_PCIE0_IO_ATTR       0xe0
+#define DOVE_MBUS_PCIE1_MEM_TARGET    0x8
+#define DOVE_MBUS_PCIE1_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE1_IO_TARGET     0x8
+#define DOVE_MBUS_PCIE1_IO_ATTR       0xe0
+#define DOVE_MBUS_CESA_TARGET         0x3
+#define DOVE_MBUS_CESA_ATTR           0x1
+#define DOVE_MBUS_BOOTROM_TARGET      0x1
+#define DOVE_MBUS_BOOTROM_ATTR        0xfd
+#define DOVE_MBUS_SCRATCHPAD_TARGET   0xd
+#define DOVE_MBUS_SCRATCHPAD_ATTR     0x0
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void)
 {
 	/*
 	 * The PCIe windows will no longer be statically allocated
-	 * here once Dove is migrated to the pci-mvebu driver.
+	 * here once Dove is migrated to the pci-mvebu driver. The
+	 * non-PCIe windows will no longer be created here once Dove
+	 * fully moves to DT.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET,
+					  DOVE_MBUS_PCIE0_IO_ATTR,
 					  DOVE_PCIE0_IO_PHYS_BASE,
 					  DOVE_PCIE0_IO_SIZE,
-					  DOVE_PCIE0_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  DOVE_PCIE0_IO_BUS_BASE);
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET,
+					  DOVE_MBUS_PCIE1_IO_ATTR,
 					  DOVE_PCIE1_IO_PHYS_BASE,
 					  DOVE_PCIE1_IO_SIZE,
-					  DOVE_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  DOVE_PCIE0_MEM_PHYS_BASE,
-					  DOVE_PCIE0_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  DOVE_PCIE1_MEM_PHYS_BASE,
-					  DOVE_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
-			      DOVE_CESA_SIZE);
-	mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
-			      DOVE_BOOTROM_SIZE);
-	mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
-			      DOVE_SCRATCHPAD_SIZE);
+					  DOVE_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET,
+				    DOVE_MBUS_PCIE0_MEM_ATTR,
+				    DOVE_PCIE0_MEM_PHYS_BASE,
+				    DOVE_PCIE0_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET,
+				    DOVE_MBUS_PCIE1_MEM_ATTR,
+				    DOVE_PCIE1_MEM_PHYS_BASE,
+				    DOVE_PCIE1_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET,
+				    DOVE_MBUS_CESA_ATTR,
+				    DOVE_CESA_PHYS_BASE,
+				    DOVE_CESA_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET,
+				    DOVE_MBUS_BOOTROM_ATTR,
+				    DOVE_BOOTROM_PHYS_BASE,
+				    DOVE_BOOTROM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET,
+				    DOVE_MBUS_SCRATCHPAD_ATTR,
+				    DOVE_SCRATCHPAD_PHYS_BASE,
+				    DOVE_SCRATCHPAD_SIZE);
 }
 
 void __init dove_init(void)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 60bd729a1ba5..8a433a51289c 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = {
 
 /* Enable gpio for a range of pins. mode should be a combination of
    GPIO_OUTPUT_OK | GPIO_INPUT_OK */
-static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 {
 	int i;
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c95dbce2468e..39ef3b613912 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -212,7 +212,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"hclk",		&clk_h),
 	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
-	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ohci-platform",	NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index df8612fbbc9c..d95ee28a616a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,6 +36,7 @@
 #include <linux/export.h>
 #include <linux/irqchip/arm-vic.h>
 #include <linux/reboot.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -281,7 +282,7 @@ static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
 	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
 static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
+	{ IRQ_EP93XX_UART2 }, NULL);
 
 static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
 	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
@@ -297,25 +298,53 @@ static struct platform_device ep93xx_rtc_device = {
 	.resource	= ep93xx_rtc_resource,
 };
 
+/*************************************************************************
+ * EP93xx OHCI USB Host
+ *************************************************************************/
+
+static struct clk *ep93xx_ohci_host_clock;
+
+static int ep93xx_ohci_power_on(struct platform_device *pdev)
+{
+	if (!ep93xx_ohci_host_clock) {
+		ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(ep93xx_ohci_host_clock))
+			return PTR_ERR(ep93xx_ohci_host_clock);
+	}
+
+	return clk_enable(ep93xx_ohci_host_clock);
+}
+
+static void ep93xx_ohci_power_off(struct platform_device *pdev)
+{
+	clk_disable(ep93xx_ohci_host_clock);
+}
+
+static struct usb_ohci_pdata ep93xx_ohci_pdata = {
+	.power_on	= ep93xx_ohci_power_on,
+	.power_off	= ep93xx_ohci_power_off,
+	.power_suspend	= ep93xx_ohci_power_off,
+};
 
 static struct resource ep93xx_ohci_resources[] = {
 	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
 	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
 };
 
+static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ep93xx_ohci_device = {
-	.name		= "ep93xx-ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
+	.resource	= ep93xx_ohci_resources,
 	.dev		= {
-		.dma_mask		= &ep93xx_ohci_device.dev.coherent_dma_mask,
+		.dma_mask		= &ep93xx_ohci_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &ep93xx_ohci_pdata,
 	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
 };
 
-
 /*************************************************************************
  * EP93xx physmap'ed flash
  *************************************************************************/
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 605956fd07a2..6bc1c181581d 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>
@@ -224,62 +224,15 @@ static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
 #define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
 #define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
 
-static struct gpio vision_spi_mmc_gpios[] = {
-	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
-	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
-};
-
-static int vision_spi_mmc_init(struct device *pdev,
-			irqreturn_t (*func)(int, void *), void *pdata)
-{
-	int err;
-
-	err = gpio_request_array(vision_spi_mmc_gpios,
-				 ARRAY_SIZE(vision_spi_mmc_gpios));
-	if (err)
-		return err;
-
-	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
-	if (err)
-		goto exit_err;
-
-	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
-			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
-	if (err)
-		goto exit_err;
-
-	return 0;
-
-exit_err:
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-	return err;
-
-}
-
-static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
-{
-	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-}
-
-static int vision_spi_mmc_get_ro(struct device *pdev)
-{
-	return !!gpio_get_value(VISION_SPI_MMC_WP);
-}
-
-static int vision_spi_mmc_get_cd(struct device *pdev)
-{
-	return !gpio_get_value(VISION_SPI_MMC_CD);
-}
-
 static struct mmc_spi_platform_data vision_spi_mmc_data = {
-	.init		= vision_spi_mmc_init,
-	.exit		= vision_spi_mmc_exit,
-	.get_ro		= vision_spi_mmc_get_ro,
-	.get_cd		= vision_spi_mmc_get_cd,
 	.detect_delay	= 100,
 	.powerup_msecs	= 100,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.flags		= MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
+	.cd_gpio	= VISION_SPI_MMC_CD,
+	.cd_debounce	= 1,
+	.ro_gpio	= VISION_SPI_MMC_WP,
+	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
 };
 
 static int vision_spi_mmc_hw_setup(struct spi_device *spi)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5952e68c76c4..f9d67a0acb2a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -14,19 +14,28 @@ menu "SAMSUNG EXYNOS SoCs Support"
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
+	select ARM_AMBA
+	select CLKSRC_OF
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
+	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
+	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
+	select S5P_DEV_MFC
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
+	select ARM_AMBA
+	select CLKSRC_OF
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select PINCTRL
+	select USB_ARCH_HAS_XHCI
 	help
 	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
 
@@ -36,6 +45,7 @@ config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select ARM_CPU_SUSPEND if PM
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
@@ -49,7 +59,9 @@ config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
@@ -60,7 +72,9 @@ config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4412 SoC support
@@ -69,6 +83,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
@@ -93,6 +108,7 @@ config SOC_EXYNOS5440
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
@@ -103,35 +119,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-comment "Flattened Device Tree based board for EXYNOS SoCs"
-
-config MACH_EXYNOS4_DT
-	bool "Samsung Exynos4 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS4
-	select ARM_AMBA
-	select CLKSRC_OF
-	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
-	select CPU_EXYNOS4210
-	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
-	select S5P_DEV_MFC
-	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the Exynos4 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-config MACH_EXYNOS5_DT
-	bool "SAMSUNG EXYNOS5 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS5
-	select ARM_AMBA
-	select CLKSRC_OF
-	select USB_ARCH_HAS_XHCI
-	help
-	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 53696154aead..8930b66b4abd 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -32,5 +32,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
 # machine support
 
-obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
-obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= mach-exynos4-dt.o
+obj-$(CONFIG_ARCH_EXYNOS5)	+= mach-exynos5-dt.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index ba95e5db2501..61d2906ccefb 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,10 +26,9 @@
 #include <linux/export.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -294,6 +293,16 @@ void exynos5_restart(enum reboot_mode mode, const char *cmd)
 	__raw_writel(val, addr);
 }
 
+static struct platform_device exynos_cpuidle = {
+	.name		= "exynos_cpuidle",
+	.id		= -1,
+};
+
+void __init exynos_cpuidle_init(void)
+{
+	platform_device_register(&exynos_cpuidle);
+}
+
 void __init exynos_init_late(void)
 {
 	if (of_machine_is_compatible("samsung,exynos5440"))
@@ -367,12 +376,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-void __init exynos_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 struct bus_type exynos_subsys = {
 	.name		= "exynos-core",
 	.dev_name	= "exynos-core",
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 972490fc09d6..ff9b6a9419b0 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,65 +16,22 @@
 #include <linux/of.h>
 
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-void exynos_init_time(void);
-extern unsigned long xxti_f, xusbxti_f;
 
 struct map_desc;
 void exynos_init_io(void);
 void exynos4_restart(enum reboot_mode mode, const char *cmd);
 void exynos5_restart(enum reboot_mode mode, const char *cmd);
+void exynos_cpuidle_init(void);
 void exynos_init_late(void);
 
-/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
-void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom);
-void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
-
 void exynos_firmware_init(void);
 
-void exynos_set_timer_source(u8 channels);
-
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else
 static inline int exynos_pm_late_initcall(void) { return 0; }
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS4
-void exynos4_register_clocks(void);
-void exynos4_setup_clocks(void);
-
-#else
-#define exynos4_register_clocks()
-#define exynos4_setup_clocks()
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-void exynos5_register_clocks(void);
-void exynos5_setup_clocks(void);
-
-#else
-#define exynos5_register_clocks()
-#define exynos5_setup_clocks()
-#endif
-
-#ifdef CONFIG_CPU_EXYNOS4210
-void exynos4210_register_clocks(void);
-
-#else
-#define exynos4210_register_clocks()
-#endif
-
-#ifdef CONFIG_SOC_EXYNOS4212
-void exynos4212_register_clocks(void);
-
-#else
-#define exynos4212_register_clocks()
-#endif
-
-struct device_node;
-void combiner_init(void __iomem *combiner_base, struct device_node *np,
-			unsigned int max_nr, int irq_base);
-
 extern struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 225ee8431c72..ddbfe8709fe7 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/time.h>
+#include <linux/platform_device.h>
 
 #include <asm/proc-fns.h>
 #include <asm/smp_scu.h>
@@ -192,7 +193,7 @@ static void __init exynos5_core_down_clk(void)
 	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
 }
 
-static int __init exynos4_init_cpuidle(void)
+static int exynos_cpuidle_probe(struct platform_device *pdev)
 {
 	int cpu_id, ret;
 	struct cpuidle_device *device;
@@ -200,9 +201,12 @@ static int __init exynos4_init_cpuidle(void)
 	if (soc_is_exynos5250())
 		exynos5_core_down_clk();
 
+	if (soc_is_exynos5440())
+		exynos4_idle_driver.state_count = 1;
+
 	ret = cpuidle_register_driver(&exynos4_idle_driver);
 	if (ret) {
-		printk(KERN_ERR "CPUidle failed to register driver\n");
+		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
 		return ret;
 	}
 
@@ -216,11 +220,20 @@ static int __init exynos4_init_cpuidle(void)
 
 		ret = cpuidle_register_device(device);
 		if (ret) {
-			printk(KERN_ERR "CPUidle register device failed\n");
+			dev_err(&pdev->dev, "failed to register cpuidle device\n");
 			return ret;
 		}
 	}
 
 	return 0;
 }
-device_initcall(exynos4_init_cpuidle);
+
+static struct platform_driver exynos_cpuidle_driver = {
+	.probe	= exynos_cpuidle_probe,
+	.driver = {
+		.name = "exynos_cpuidle",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(exynos_cpuidle_driver);
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7e98ce..2cdb63e8ce5c 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 0099c6c13bba..4603e6bd424b 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,12 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
-#include <linux/memblock.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <plat/mfc.h>
@@ -25,6 +21,8 @@
 
 static void __init exynos4_dt_machine_init(void)
 {
+	exynos_cpuidle_init();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -54,7 +52,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.init_early	= exynos_firmware_init,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 	.reserve	= exynos4_reserve,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index f874b773ca13..1fe075a70c1e 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,14 +11,10 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/memblock.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
 #include <plat/mfc.h>
 
 #include "common.h"
@@ -47,6 +43,8 @@ static void __init exynos5_dt_machine_init(void)
 		}
 	}
 
+	exynos_cpuidle_init();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -76,7 +74,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos_init_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 1fd2cf097e30..eb1fa5c84723 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -692,14 +692,14 @@ static void netwinder_led_set(struct led_classdev *cdev,
 	unsigned long flags;
 	u32 reg;
 
-	spin_lock_irqsave(&nw_gpio_lock, flags);
+	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	reg = nw_gpio_read();
 	if (b != LED_OFF)
 		reg &= ~led->mask;
 	else
 		reg |= led->mask;
 	nw_gpio_modify_op(led->mask, reg);
-	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
@@ -709,9 +709,9 @@ static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
 	unsigned long flags;
 	u32 reg;
 
-	spin_lock_irqsave(&nw_gpio_lock, flags);
+	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	reg = nw_gpio_read();
-	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	return (reg & led->mask) ? LED_OFF : LED_FULL;
 }
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 70bfa571b24b..f8cb5710d6ee 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -21,9 +21,9 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 
 #define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
+#define irq_to_gpio(x)		((x) - GPIO_IRQ_BASE)
 
 /* GPIO registers definition */
 #define GPIO_DATA_OUT		0x0
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
deleted file mode 100644
index 40a0527bada7..000000000000
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Gemini gpiolib specific defines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_GPIO_H__
-#define __MACH_GPIO_H__
-
-#include <mach/irqs.h>
-
-#define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
-#define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
-
-#endif /* __MACH_GPIO_H__ */
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 21dc5a89d1c4..0a63c4d25b64 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -13,6 +13,8 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 #include <asm/mach/time.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 
 /*
  * Register definitions for the timers
@@ -33,19 +35,89 @@
 #define TIMER_3_CR_CLOCK		(1 << 7)
 #define TIMER_3_CR_INT			(1 << 8)
 
+static unsigned int tick_rate;
+
+static int gemini_timer_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	u32 cr;
+
+	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* This may be overdoing it, feel free to test without this */
+	cr &= ~TIMER_2_CR_ENABLE;
+	cr &= ~TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Set next event */
+	writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	cr |= TIMER_2_CR_ENABLE;
+	cr |= TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	return 0;
+}
+
+static void gemini_timer_set_mode(enum clock_event_mode mode,
+				  struct clock_event_device *evt)
+{
+	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	u32 cr;
+
+	switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+		/* Start the timer */
+		writel(period,
+		       TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		writel(period,
+		       TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr |= TIMER_2_CR_ENABLE;
+		cr |= TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		/*
+		 * Disable also for oneshot: the set_next() call will
+		 * arm the timer instead.
+		 */
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr &= ~TIMER_2_CR_ENABLE;
+		cr &= ~TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	default:
+                break;
+	}
+}
+
+/* Use TIMER2 as clock event */
+static struct clock_event_device gemini_clockevent = {
+	.name		= "TIMER2",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= gemini_timer_set_next_event,
+	.set_mode	= gemini_timer_set_mode,
+};
+
 /*
  * IRQ handler for the timer
  */
 static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &gemini_clockevent;
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
 static struct irqaction gemini_timer_irq = {
 	.name		= "Gemini Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= gemini_timer_interrupt,
 };
 
@@ -54,9 +126,9 @@ static struct irqaction gemini_timer_irq = {
  */
 void __init gemini_timer_init(void)
 {
-	unsigned int tick_rate, reg_v;
+	u32 reg_v;
 
-	reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
+	reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
 	tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
 
 	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
@@ -82,8 +154,17 @@ void __init gemini_timer_init(void)
 	 * Make irqs happen for the system timer
 	 */
 	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
-	/* Start the timer */
-	__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Enable and use TIMER1 as clock source */
+	writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
+				  "TIMER1", tick_rate, 300, 32,
+				  clocksource_mmio_readl_up))
+		pr_err("timer: failed to initialize gemini clock source\n");
+
+	/* Configure and register the clockevent */
+	clockevents_config_and_register(&gemini_clockevent, tick_rate,
+					1, 0xffffffff);
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index cd9fcb1cd7ab..08332d841440 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,20 +1,27 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_ERRATA_764369
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_798181 if SMP
 	select ARM_GIC
+	select ARM_PSCI
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MAILBOX
 	select PL320_MBOX
 	select SPARSE_IRQ
 	select USE_OF
+	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 8a1ef576d79f..55840f414d3e 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -3,6 +3,4 @@ obj-y					:= highbank.o system.o smc.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index aea1ec5ab6f8..7ec5edcd1336 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -3,7 +3,6 @@
 
 #include <linux/reboot.h>
 
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
 extern void highbank_restart(enum reboot_mode, const char *);
 extern void __iomem *scu_base_addr;
 
@@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {}
 #endif
 
 extern void highbank_smc1(int fn, int arg);
-extern void highbank_cpu_die(unsigned int cpu);
-
-extern struct smp_operations highbank_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 88815795fe26..b3d7e5634b83 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,24 +18,18 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
-#include <linux/smp.h>
 #include <linux/amba/bus.h>
-#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
 
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
+#include <asm/psci.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "core.h"
 #include "sysregs.h"
@@ -53,25 +47,12 @@ static void __init highbank_scu_map_io(void)
 	scu_base_addr = ioremap(base, SZ_4K);
 }
 
-#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
 
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
-	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
-	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
-	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
-	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
-			  HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
-
-#ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
 	/* Disable PL310 L2 Cache controller */
 	highbank_smc1(0x102, 0x0);
 }
-#endif
 
 static void __init highbank_init_irq(void)
 {
@@ -80,26 +61,13 @@ static void __init highbank_init_irq(void)
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
 
-#ifdef CONFIG_CACHE_L2X0
 	/* Enable PL310 L2 Cache controller */
-	highbank_smc1(0x102, 0x1);
-	l2x0_of_init(0, ~0UL);
-	outer_cache.disable = highbank_l2x0_disable;
-#endif
-}
-
-static void __init highbank_timer_init(void)
-{
-	struct device_node *np;
-
-	/* Map system registers */
-	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
-	sregs_base = of_iomap(np, 0);
-	WARN_ON(!sregs_base);
-
-	of_clk_init(NULL);
-
-	clocksource_of_init();
+	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+		highbank_smc1(0x102, 0x1);
+		l2x0_of_init(0, ~0UL);
+		outer_cache.disable = highbank_l2x0_disable;
+	}
 }
 
 static void highbank_power_off(void)
@@ -158,8 +126,19 @@ static struct notifier_block highbank_platform_nb = {
 	.notifier_call = highbank_platform_notifier,
 };
 
+static struct platform_device highbank_cpuidle_device = {
+	.name = "cpuidle-calxeda",
+};
+
 static void __init highbank_init(void)
 {
+	struct device_node *np;
+
+	/* Map system registers */
+	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	sregs_base = of_iomap(np, 0);
+	WARN_ON(!sregs_base);
+
 	pm_power_off = highbank_power_off;
 	highbank_pm_init();
 
@@ -167,6 +146,9 @@ static void __init highbank_init(void)
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	if (psci_ops.cpu_suspend)
+		platform_device_register(&highbank_cpuidle_device);
 }
 
 static const char *highbank_match[] __initconst = {
@@ -176,9 +158,10 @@ static const char *highbank_match[] __initconst = {
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
-	.smp		= smp_ops(highbank_smp_ops),
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= (4ULL * SZ_1G),
+#endif
 	.init_irq	= highbank_init_irq,
-	.init_time	= highbank_timer_init,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 	.restart	= highbank_restart,
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
deleted file mode 100644
index 32d75cf55cbc..000000000000
--- a/arch/arm/mach-highbank/platsmp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	highbank_set_cpu_jump(cpu, secondary_startup);
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init highbank_smp_init_cpus(void)
-{
-	unsigned int i, ncores = 4;
-
-	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "highbank: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
-{
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
-}
-
-struct smp_operations highbank_smp_ops __initdata = {
-	.smp_init_cpus		= highbank_smp_init_cpus,
-	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
-	.smp_boot_secondary	= highbank_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= highbank_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 04eddb4f4380..7f2bd85eb935 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -16,27 +16,19 @@
 
 #include <linux/cpu_pm.h>
 #include <linux/init.h>
-#include <linux/io.h>
 #include <linux/suspend.h>
 
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
 #include <asm/suspend.h>
-
-#include "core.h"
-#include "sysregs.h"
+#include <asm/psci.h>
 
 static int highbank_suspend_finish(unsigned long val)
 {
-	outer_flush_all();
-	outer_disable();
-
-	highbank_set_pwr_suspend();
-
-	cpu_do_idle();
+	const struct psci_power_state ps = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+		.affinity_level = 1,
+	};
 
-	highbank_clear_pwr_request();
-	return 0;
+	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
 }
 
 static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state)
 	cpu_pm_enter();
 	cpu_cluster_pm_enter();
 
-	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
 	cpu_cluster_pm_exit();
 	cpu_pm_exit();
 
-	highbank_smc1(0x102, 0x1);
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
 	return 0;
 }
 
@@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
 
 void __init highbank_pm_init(void)
 {
+	if (!psci_ops.cpu_suspend)
+		return;
+
 	suspend_set_ops(&highbank_pm_ops);
 }
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f54656091a9d..7a6e6f710068 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,14 +1,17 @@
 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
 	select MULTI_IRQ_HANDLER
+	select SOC_BUS
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -22,7 +25,7 @@ config MXC_IRQ_PRIOR
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
-	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  by lower priority IRQ.
 	  This may be useful in embedded applications, where are strong
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
@@ -90,14 +93,12 @@ config MACH_MX27
 config SOC_IMX1
 	bool
 	select ARCH_MX1
-	select COMMON_CLK
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
 config SOC_IMX21
 	bool
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -106,7 +107,6 @@ config SOC_IMX25
 	bool
 	select ARCH_MX25
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_ARM926T
 	select MXC_AVIC
 
@@ -114,7 +114,6 @@ config SOC_IMX27
 	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MACH_MX27
@@ -122,7 +121,6 @@ config SOC_IMX27
 
 config SOC_IMX31
 	bool
-	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
@@ -131,7 +129,6 @@ config SOC_IMX31
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V6K
 	select HAVE_EPIT
 	select MXC_AVIC
@@ -142,7 +139,6 @@ config SOC_IMX5
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V7
 	select MXC_TZIC
 
@@ -785,21 +781,21 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select COMMON_CLK
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
 	select PINCTRL
 	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e20f22d58fd8..bbe1f5bb799c 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -15,7 +15,8 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o clk.o
+			    clk-pfd.o clk-busy.o clk.o \
+			    clk-fixup-div.o clk-fixup-mux.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
@@ -101,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+# i.MX6SL reuses pm-imx6q.c
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 0cfa07dd9aa4..4a40bbb46183 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include "common.h"
+#include "hardware.h"
 
 #define REG_SET		0x4
 #define REG_CLR		0x8
@@ -26,6 +27,7 @@
 #define ANADIG_USB1_CHRG_DETECT	0x1b0
 #define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
+#define ANADIG_DIGPROG_IMX6SL	0x280
 
 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
@@ -66,7 +68,7 @@ void imx_anatop_post_resume(void)
 	imx_anatop_enable_weak2p5(false);
 }
 
-void imx_anatop_usb_chrg_detect_disable(void)
+static void imx_anatop_usb_chrg_detect_disable(void)
 {
 	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
 		BM_ANADIG_USB_CHRG_DETECT_EN_B
@@ -76,21 +78,38 @@ void imx_anatop_usb_chrg_detect_disable(void)
 		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
 }
 
-u32 imx_anatop_get_digprog(void)
+void __init imx_init_revision_from_anatop(void)
 {
 	struct device_node *np;
 	void __iomem *anatop_base;
-	static u32 digprog;
-
-	if (digprog)
-		return digprog;
+	unsigned int revision;
+	u32 digprog;
+	u16 offset = ANADIG_DIGPROG;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = of_iomap(np, 0);
 	WARN_ON(!anatop_base);
-	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+	if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
+		offset = ANADIG_DIGPROG_IMX6SL;
+	digprog = readl_relaxed(anatop_base + offset);
+	iounmap(anatop_base);
+
+	switch (digprog & 0xff) {
+	case 0:
+		revision = IMX_CHIP_REVISION_1_0;
+		break;
+	case 1:
+		revision = IMX_CHIP_REVISION_1_1;
+		break;
+	case 2:
+		revision = IMX_CHIP_REVISION_1_2;
+		break;
+	default:
+		revision = IMX_CHIP_REVISION_UNKNOWN;
+	}
 
-	return digprog;
+	mxc_set_cpu_type(digprog >> 16 & 0xff);
+	imx_set_soc_revision(revision);
 }
 
 void __init imx_anatop_init(void)
@@ -100,4 +119,6 @@ void __init imx_anatop_init(void)
 		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
 		return;
 	}
+
+	imx_anatop_usb_chrg_detect_disable();
 }
diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c
new file mode 100644
index 000000000000..21db020b1f2d
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-div.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
+#define div_mask(d)	((1 << (d->width)) - 1)
+
+/**
+ * struct clk_fixup_div - imx integer fixup divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup divider clock is a subclass of basic clk_divider
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_div {
+	struct clk_divider divider;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
+{
+	struct clk_divider *divider = to_clk_div(hw);
+
+	return container_of(divider, struct clk_fixup_div, divider);
+}
+
+static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
+}
+
+static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
+}
+
+static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+	struct clk_divider *div = to_clk_div(hw);
+	unsigned int divider, value;
+	unsigned long flags = 0;
+	u32 val;
+
+	divider = parent_rate / rate;
+
+	/* Zero based divider */
+	value = divider - 1;
+
+	if (value > div_mask(div))
+		value = div_mask(div);
+
+	spin_lock_irqsave(div->lock, flags);
+
+	val = readl(div->reg);
+	val &= ~(div_mask(div) << div->shift);
+	val |= value << div->shift;
+	fixup_div->fixup(&val);
+	writel(val, div->reg);
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_div_ops = {
+	.recalc_rate = clk_fixup_div_recalc_rate,
+	.round_rate = clk_fixup_div_round_rate,
+	.set_rate = clk_fixup_div_set_rate,
+};
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val))
+{
+	struct clk_fixup_div *fixup_div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
+	if (!fixup_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent ? &parent : NULL;
+	init.num_parents = parent ? 1 : 0;
+
+	fixup_div->divider.reg = reg;
+	fixup_div->divider.shift = shift;
+	fixup_div->divider.width = width;
+	fixup_div->divider.lock = &imx_ccm_lock;
+	fixup_div->divider.hw.init = &init;
+	fixup_div->ops = &clk_divider_ops;
+	fixup_div->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_div->divider.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_div);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c
new file mode 100644
index 000000000000..0d40b35c557c
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-mux.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+/**
+ * struct clk_fixup_mux - imx integer fixup multiplexer clock
+ * @mux: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup multiplexer clock is a subclass of basic clk_mux
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_mux {
+	struct clk_mux mux;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+
+	return container_of(mux, struct clk_fixup_mux, mux);
+}
+
+static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+
+	return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
+}
+
+static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+	struct clk_mux *mux = to_clk_mux(hw);
+	unsigned long flags = 0;
+	u32 val;
+
+	spin_lock_irqsave(mux->lock, flags);
+
+	val = readl(mux->reg);
+	val &= ~(mux->mask << mux->shift);
+	val |= index << mux->shift;
+	fixup_mux->fixup(&val);
+	writel(val, mux->reg);
+
+	spin_unlock_irqrestore(mux->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_mux_ops = {
+	.get_parent = clk_fixup_mux_get_parent,
+	.set_parent = clk_fixup_mux_set_parent,
+};
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val))
+{
+	struct clk_fixup_mux *fixup_mux;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
+	if (!fixup_mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_mux_ops;
+	init.parent_names = parents;
+	init.num_parents = num_parents;
+	init.flags = 0;
+
+	fixup_mux->mux.reg = reg;
+	fixup_mux->mux.shift = shift;
+	fixup_mux->mux.mask = BIT(width) - 1;
+	fixup_mux->mux.lock = &imx_ccm_lock;
+	fixup_mux->mux.hw.init = &init;
+	fixup_mux->ops = &clk_mux_ops;
+	fixup_mux->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_mux->mux.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_mux);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index c3cfa4116dc0..c6b40f386786 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
 	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
-	clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 9afac26fa1cc..ce37af26ff8c 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -11,8 +11,12 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include "crm-regs-imx5.h"
 #include "clk.h"
@@ -119,7 +123,7 @@ enum imx5_clks {
 	srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
 	spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
 	spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
-	clk_max
+	ocram, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -131,8 +135,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 {
 	int i;
 
-	of_clk_init(NULL);
-
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
 	clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -328,7 +330,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_podf], NULL, "cpu0");
 	clk_register_clkdev(clk[iim_gate], "iim", NULL);
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
@@ -397,7 +399,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
 	clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
 				spdif_sel, ARRAY_SIZE(spdif_sel));
-	clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+	clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
 	clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
 	clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
 				mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
@@ -465,12 +467,17 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	return 0;
 }
 
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
-			unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
 {
-	int i;
+	mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
+{
+	int i, irq;
 	unsigned long r;
-	struct device_node *np;
+	void __iomem *base;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -506,6 +513,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
 	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
 	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
 	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
@@ -528,12 +536,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			pr_err("i.MX53 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+	mx5_clocks_common_init(0, 0, 0, 0);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -556,9 +563,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
-	/* System timer */
-	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
-
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable_unprepare(clk[iim_gate]);
@@ -566,15 +570,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
 	clk_set_rate(clk[usboh3_per_gate], r);
 
-	return 0;
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	return mx53_clocks_init(0, 0, 0, 0);
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(base, irq);
 }
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 86567d980b07..d756d91fd741 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -25,155 +24,6 @@
 #include "common.h"
 #include "hardware.h"
 
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CCGR0				0x68
-#define CCGR1				0x6c
-#define CCGR2				0x70
-#define CCGR3				0x74
-#define CCGR4				0x78
-#define CCGR5				0x7c
-#define CCGR6				0x80
-#define CCGR7				0x84
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-	static bool last_rbc_mode;
-
-	if (last_rbc_mode == enable)
-		return;
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-
-	last_rbc_mode = enable;
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-	static bool last_wb_mode;
-
-	if (last_wb_mode == enable)
-		return;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	last_wb_mode = enable;
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		imx6q_enable_wb(false);
-		imx6q_enable_rbc(false);
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	return 0;
-}
-
 static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
 static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
 static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
@@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[]	= { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
@@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di
 static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
 static const char *pcie_axi_sels[]	= { "axi", "ahb", };
-static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
 static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
@@ -205,7 +55,23 @@ static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
+static const char *cko2_sels[] = {
+	"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
+	"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
+	"usdhc3", "dummy", "arm", "ipu1",
+	"ipu2", "vdo_axi", "osc", "gpu2d_core",
+	"gpu3d_core", "usdhc2", "ssi1", "ssi2",
+	"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
+	"ldb_di0", "ldb_di1", "esai", "eim_slow",
+	"uart_serial", "spdif", "asrc", "hsi_tx",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+	"pcie_ref", "sata_ref",
+};
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -239,7 +105,9 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
+	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
+	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -276,6 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
+	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -287,7 +156,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	WARN_ON(!base);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
-	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
@@ -329,6 +198,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
 			&imx_ccm_lock);
 
+	clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+	/*
+	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
+	 * independently configured as clock inputs or outputs.  We treat
+	 * the "output_enable" bit as a gate, even though it's really just
+	 * enabling clock output.
+	 */
+	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
 	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
@@ -346,13 +227,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 
 	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
 	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
 
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
-	ccm_base = base;
+
+	imx6q_pm_set_ccm_base(base);
 
 	/*                                  name                reg       shift width parent_names     num_parents */
 	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
@@ -384,19 +267,21 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
-	clk[ssi1_sel]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi2_sel]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi3_sel]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[usdhc1_sel]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc2_sel]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc3_sel]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi2_sel]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi3_sel]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[usdhc1_sel]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc2_sel]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc3_sel]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc4_sel]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
-	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
+	clk[emi_sel]          = imx_clk_fixup_mux("emi_sel",      base + 0x1c, 27, 2, emi_sels,        ARRAY_SIZE(emi_sels),          imx_cscmr1_fixup);
+	clk[emi_slow_sel]     = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels,   ARRAY_SIZE(emi_slow_sels),     imx_cscmr1_fixup);
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+	clk[cko2_sel]         = imx_clk_mux("cko2_sel",         base + 0x60, 16, 5, cko2_sels,         ARRAY_SIZE(cko2_sels));
+	clk[cko]              = imx_clk_mux("cko",              base + 0x60, 8, 1,  cko_sels,          ARRAY_SIZE(cko_sels));
 
 	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
 	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
@@ -406,7 +291,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
 	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
 	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
-	clk[ipg_per]          = imx_clk_divider("ipg_per",          "ipg",               base + 0x1c, 0,  6);
+	clk[ipg_per]          = imx_clk_fixup_divider("ipg_per",    "ipg",               base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
 	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
 	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
@@ -442,10 +327,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
 	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
 	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
-	clk[emi_podf]         = imx_clk_divider("emi_podf",         "emi_sel",           base + 0x1c, 20, 3);
-	clk[emi_slow_podf]    = imx_clk_divider("emi_slow_podf",    "emi_slow_sel",      base + 0x1c, 23, 3);
+	clk[emi_podf]         = imx_clk_fixup_divider("emi_podf",   "emi_sel",           base + 0x1c, 20, 3, imx_cscmr1_fixup);
+	clk[emi_slow_podf]    = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel",   base + 0x1c, 23, 3, imx_cscmr1_fixup);
 	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
 	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+	clk[cko2_podf]        = imx_clk_divider("cko2_podf",        "cko2_sel",          base + 0x60, 21, 3);
 
 	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
 	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
@@ -486,6 +372,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
 	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
 	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[vdoa]         = imx_clk_gate2("vdoa",          "vdo_axi",           base + 0x70, 26);
 	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
 	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
 	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
@@ -521,6 +408,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[spdif]        = imx_clk_gate2("spdif",         "spdif_podf",    	base + 0x7c, 14);
 	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
 	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
 	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
@@ -535,6 +423,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
 	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
 	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+	clk[cko2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -554,7 +443,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
 	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
 
-	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+	    cpu_is_imx6dl()) {
 		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
@@ -574,8 +464,19 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(clk[usbphy2_gate]);
 	}
 
-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);
+	/*
+	 * Let's initially set up CLKO with OSC24M, since this configuration
+	 * is widely used by imx6q board designs to clock audio codec.
+	 */
+	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	if (!ret)
+		ret = clk_set_parent(clk[cko], clk[cko2]);
+	if (ret)
+		pr_warn("failed to set up CLKO: %d\n", ret);
+
+	/* All existing boards with PCIe use LVDS1 */
+	if (IS_ENABLED(CONFIG_PCI_IMX6))
+		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a307ac22dffe..c0c4ef55e35b 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Reuse imx6q pm code */
+	imx6q_pm_set_ccm_base(base);
+
 	/*                                              name                reg       shift width parent_names     num_parents */
 	clks[IMX6SL_CLK_STEP]             = imx_clk_mux("step",             base + 0xc,  8,  1, step_sels,         ARRAY_SIZE(step_sels));
 	clks[IMX6SL_CLK_PLL1_SW]          = imx_clk_mux("pll1_sw",          base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
@@ -138,14 +141,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
 	clks[IMX6SL_CLK_CSI_SEL]          = imx_clk_mux("csi_sel",          base + 0x3c, 9,  2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
 	clks[IMX6SL_CLK_LCDIF_AXI_SEL]    = imx_clk_mux("lcdif_axi_sel",    base + 0x3c, 14, 2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
-	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_mux("perclk_sel",       base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels));
+	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_SEL]      = imx_clk_mux("pxp_axi_sel",      base + 0x34, 6,  3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_EPDC_AXI_SEL]     = imx_clk_mux("epdc_axi_sel",     base + 0x34, 15, 3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_GPU2D_OVG_SEL]    = imx_clk_mux("gpu2d_ovg_sel",    base + 0x18, 4,  2, gpu2d_ovg_sels,    ARRAY_SIZE(gpu2d_ovg_sels));
@@ -179,14 +182,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_SSI2_PODF]         = imx_clk_divider("ssi2_podf",         "ssi2_pred",         base + 0x2c, 0,  6);
 	clks[IMX6SL_CLK_SSI3_PRED]         = imx_clk_divider("ssi3_pred",         "ssi3_sel",          base + 0x28, 22, 3);
 	clks[IMX6SL_CLK_SSI3_PODF]         = imx_clk_divider("ssi3_podf",         "ssi3_pred",         base + 0x28, 16, 6);
-	clks[IMX6SL_CLK_PERCLK]            = imx_clk_divider("perclk",            "perclk_sel",        base + 0x1c, 0,  6);
+	clks[IMX6SL_CLK_PERCLK]            = imx_clk_fixup_divider("perclk",      "perclk_sel",        base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_PODF]      = imx_clk_divider("pxp_axi_podf",      "pxp_axi_sel",       base + 0x34, 3,  3);
 	clks[IMX6SL_CLK_EPDC_AXI_PODF]     = imx_clk_divider("epdc_axi_podf",     "epdc_axi_sel",      base + 0x34, 12, 3);
 	clks[IMX6SL_CLK_GPU2D_OVG_PODF]    = imx_clk_divider("gpu2d_ovg_podf",    "gpu2d_ovg_sel",     base + 0x18, 26, 3);
 	clks[IMX6SL_CLK_GPU2D_PODF]        = imx_clk_divider("gpu2d_podf",        "gpu2d_sel",         base + 0x18, 29, 3);
 	clks[IMX6SL_CLK_LCDIF_PIX_PRED]    = imx_clk_divider("lcdif_pix_pred",    "lcdif_pix_sel",     base + 0x38, 3,  3);
 	clks[IMX6SL_CLK_EPDC_PIX_PRED]     = imx_clk_divider("epdc_pix_pred",     "epdc_pix_sel",      base + 0x38, 12, 3);
-	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_divider("lcdif_pix_podf",    "lcdif_pix_pred",    base + 0x1c, 20, 3);
+	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_EPDC_PIX_PODF]     = imx_clk_divider("epdc_pix_podf",     "epdc_pix_pred",     base + 0x18, 23, 3);
 	clks[IMX6SL_CLK_SPDIF0_PRED]       = imx_clk_divider("spdif0_pred",       "spdif0_sel",        base + 0x30, 25, 3);
 	clks[IMX6SL_CLK_SPDIF0_PODF]       = imx_clk_divider("spdif0_podf",       "spdif0_pred",       base + 0x30, 22, 3);
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index a9fad5f8d340..f6640b6a7b31 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -48,7 +48,7 @@ struct clk_pllv3 {
 static int clk_pllv3_prepare(struct clk_hw *hw)
 {
 	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	unsigned long timeout;
 	u32 val;
 
 	val = readl_relaxed(pll->base);
@@ -59,12 +59,19 @@ static int clk_pllv3_prepare(struct clk_hw *hw)
 		val &= ~BM_PLL_POWER;
 	writel_relaxed(val, pll->base);
 
+	timeout = jiffies + msecs_to_jiffies(10);
 	/* Wait for PLL to lock */
-	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+	do {
+		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+			break;
 		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
+			break;
+	} while (1);
 
-	return 0;
+	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+		return 0;
+	else
+		return -ETIMEDOUT;
 }
 
 static void clk_pllv3_unprepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index 55bc80a00666..edc35df7bed4 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -37,3 +37,29 @@ struct clk * __init imx_obtain_fixed_clock(
 		clk = imx_clk_fixed(name, rate);
 	return clk;
 }
+
+/*
+ * This fixups the register CCM_CSCMR1 write value.
+ * The write/read/divider values of the aclk_podf field
+ * of that register have the relationship described by
+ * the following table:
+ *
+ * write value       read value        divider
+ * 3b'000            3b'110            7
+ * 3b'001            3b'111            8
+ * 3b'010            3b'100            5
+ * 3b'011            3b'101            6
+ * 3b'100            3b'010            3
+ * 3b'101            3b'011            4
+ * 3b'110            3b'000            1
+ * 3b'111            3b'001            2(default)
+ *
+ * That's why we do the xor operation below.
+ */
+#define CSCMR1_FIXUP	0x00600000
+
+void imx_cscmr1_fixup(u32 *val)
+{
+	*val ^= CSCMR1_FIXUP;
+	return;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 0e4e8bb261b9..048c5ad8a80b 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
 
 extern spinlock_t imx_ccm_lock;
 
+extern void imx_cscmr1_fixup(u32 *val);
+
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
 		void __iomem *base);
 
@@ -49,6 +51,14 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
 			     const char **parent_names, int num_parents);
 
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val));
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val));
+
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
 {
 	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
@@ -79,7 +89,8 @@ static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 		u8 shift, u8 width, const char **parents, int num_parents)
 {
-	return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+	return clk_register_mux(NULL, name, parents, num_parents,
+			CLK_SET_RATE_NO_REPARENT, reg, shift,
 			width, 0, &imx_ccm_lock);
 }
 
@@ -88,7 +99,7 @@ static inline struct clk *imx_clk_mux_flags(const char *name,
 		int num_parents, unsigned long flags)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
-			flags, reg, shift, width, 0,
+			flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
 			&imx_ccm_lock);
 }
 
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index cb6c838b63ed..7cbe22d0c6e9 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -13,74 +13,73 @@
 
 #include <linux/reboot.h>
 
+struct irq_data;
 struct platform_device;
 struct pt_regs;
 struct clk;
 enum mxc_cpu_pwr_mode;
 
-extern void mx1_map_io(void);
-extern void mx21_map_io(void);
-extern void mx25_map_io(void);
-extern void mx27_map_io(void);
-extern void mx31_map_io(void);
-extern void mx35_map_io(void);
-extern void mx51_map_io(void);
-extern void mx53_map_io(void);
-extern void imx1_init_early(void);
-extern void imx21_init_early(void);
-extern void imx25_init_early(void);
-extern void imx27_init_early(void);
-extern void imx31_init_early(void);
-extern void imx35_init_early(void);
-extern void imx51_init_early(void);
-extern void imx53_init_early(void);
-extern void mxc_init_irq(void __iomem *);
-extern void tzic_init_irq(void __iomem *);
-extern void mx1_init_irq(void);
-extern void mx21_init_irq(void);
-extern void mx25_init_irq(void);
-extern void mx27_init_irq(void);
-extern void mx31_init_irq(void);
-extern void mx35_init_irq(void);
-extern void mx51_init_irq(void);
-extern void mx53_init_irq(void);
-extern void imx1_soc_init(void);
-extern void imx21_soc_init(void);
-extern void imx25_soc_init(void);
-extern void imx27_soc_init(void);
-extern void imx31_soc_init(void);
-extern void imx35_soc_init(void);
-extern void imx51_soc_init(void);
-extern void imx51_init_late(void);
-extern void imx53_init_late(void);
-extern void epit_timer_init(void __iomem *base, int irq);
-extern void mxc_timer_init(void __iomem *, int);
-extern int mx1_clocks_init(unsigned long fref);
-extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(void);
-extern int mx27_clocks_init(unsigned long fref);
-extern int mx31_clocks_init(unsigned long fref);
-extern int mx35_clocks_init(void);
-extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+void mx1_map_io(void);
+void mx21_map_io(void);
+void mx25_map_io(void);
+void mx27_map_io(void);
+void mx31_map_io(void);
+void mx35_map_io(void);
+void mx51_map_io(void);
+void mx53_map_io(void);
+void imx1_init_early(void);
+void imx21_init_early(void);
+void imx25_init_early(void);
+void imx27_init_early(void);
+void imx31_init_early(void);
+void imx35_init_early(void);
+void imx51_init_early(void);
+void imx53_init_early(void);
+void mxc_init_irq(void __iomem *);
+void tzic_init_irq(void __iomem *);
+void mx1_init_irq(void);
+void mx21_init_irq(void);
+void mx25_init_irq(void);
+void mx27_init_irq(void);
+void mx31_init_irq(void);
+void mx35_init_irq(void);
+void mx51_init_irq(void);
+void mx53_init_irq(void);
+void imx1_soc_init(void);
+void imx21_soc_init(void);
+void imx25_soc_init(void);
+void imx27_soc_init(void);
+void imx31_soc_init(void);
+void imx35_soc_init(void);
+void imx51_soc_init(void);
+void imx51_init_late(void);
+void imx53_init_late(void);
+void epit_timer_init(void __iomem *base, int irq);
+void mxc_timer_init(void __iomem *, int);
+int mx1_clocks_init(unsigned long fref);
+int mx21_clocks_init(unsigned long lref, unsigned long fref);
+int mx25_clocks_init(void);
+int mx27_clocks_init(unsigned long fref);
+int mx31_clocks_init(unsigned long fref);
+int mx35_clocks_init(void);
+int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-extern int mx25_clocks_init_dt(void);
-extern int mx27_clocks_init_dt(void);
-extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
-extern struct platform_device *mxc_register_gpio(char *name, int id,
+int mx25_clocks_init_dt(void);
+int mx27_clocks_init_dt(void);
+int mx31_clocks_init_dt(void);
+struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern void mxc_set_cpu_type(unsigned int type);
-extern void mxc_restart(enum reboot_mode, const char *);
-extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc_arch_reset_init_dt(void);
-extern int mx53_revision(void);
-extern int imx6q_revision(void);
-extern int mx53_display_revision(void);
-extern void imx_set_aips(void __iomem *);
-extern int mxc_device_init(void);
+void mxc_set_cpu_type(unsigned int type);
+void mxc_restart(enum reboot_mode, const char *);
+void mxc_arch_reset_init(void __iomem *);
+void mxc_arch_reset_init_dt(void);
+int mx53_revision(void);
+void imx_set_aips(void __iomem *);
+int mxc_device_init(void);
+void imx_set_soc_revision(unsigned int rev);
+unsigned int imx_get_soc_revision(void);
+void imx_init_revision_from_anatop(void);
+struct device *imx_soc_device_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -97,8 +96,8 @@ enum mx3_cpu_pwr_mode {
 	MX3_SLEEP,
 };
 
-extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void imx_print_silicon_rev(const char *cpu, int srev);
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
@@ -112,55 +111,65 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
 
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-extern u32 imx_get_cpu_arg(int cpu);
-extern void imx_set_cpu_arg(int cpu, u32 arg);
-extern void v7_cpu_resume(void);
+void imx_enable_cpu(int cpu, bool enable);
+void imx_set_cpu_jump(int cpu, void *jump_addr);
+u32 imx_get_cpu_arg(int cpu);
+void imx_set_cpu_arg(int cpu, u32 arg);
+void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
-extern void v7_secondary_startup(void);
-extern void imx_scu_map_io(void);
-extern void imx_smp_prepare(void);
-extern void imx_scu_standby_enable(void);
+void v7_secondary_startup(void);
+void imx_scu_map_io(void);
+void imx_smp_prepare(void);
+void imx_scu_standby_enable(void);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
-extern void imx_src_init(void);
-extern void imx_src_prepare_restart(void);
-extern void imx_gpc_init(void);
-extern void imx_gpc_pre_suspend(void);
-extern void imx_gpc_post_resume(void);
-extern void imx_gpc_mask_all(void);
-extern void imx_gpc_restore_all(void);
-extern void imx_anatop_init(void);
-extern void imx_anatop_pre_suspend(void);
-extern void imx_anatop_post_resume(void);
-extern void imx_anatop_usb_chrg_detect_disable(void);
-extern u32 imx_anatop_get_digprog(void);
-extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_set_chicken_bit(void);
-
-extern void imx_cpu_die(unsigned int cpu);
-extern int imx_cpu_kill(unsigned int cpu);
+void imx_src_init(void);
+#ifdef CONFIG_HAVE_IMX_SRC
+void imx_src_prepare_restart(void);
+#else
+static inline void imx_src_prepare_restart(void) {}
+#endif
+void imx_gpc_init(void);
+void imx_gpc_pre_suspend(void);
+void imx_gpc_post_resume(void);
+void imx_gpc_mask_all(void);
+void imx_gpc_restore_all(void);
+void imx_gpc_irq_mask(struct irq_data *d);
+void imx_gpc_irq_unmask(struct irq_data *d);
+void imx_anatop_init(void);
+void imx_anatop_pre_suspend(void);
+void imx_anatop_post_resume(void);
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+void imx6q_set_chicken_bit(void);
+
+void imx_cpu_die(unsigned int cpu);
+int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
-extern void imx6q_pm_init(void);
-extern void imx51_pm_init(void);
-extern void imx53_pm_init(void);
+void imx6q_pm_init(void);
+void imx6q_pm_set_ccm_base(void __iomem *base);
+void imx5_pm_init(void);
 #else
 static inline void imx6q_pm_init(void) {}
-static inline void imx51_pm_init(void) {}
-static inline void imx53_pm_init(void) {}
+static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
+static inline void imx5_pm_init(void) {}
 #endif
 
 #ifdef CONFIG_NEON
-extern int mx51_neon_fixup(void);
+int mx51_neon_fixup(void);
 #else
 static inline int mx51_neon_fixup(void) { return 0; }
 #endif
 
+#ifdef CONFIG_CACHE_L2X0
+void imx_init_l2cache(void);
+#else
+static inline void imx_init_l2cache(void) {}
+#endif
+
 extern struct smp_operations imx_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index e70e3acbf9bd..ba3b498a67ec 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,6 +1,9 @@
-
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include "hardware.h"
 #include "common.h"
@@ -8,11 +11,23 @@
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
 
+static unsigned int imx_soc_revision;
+
 void mxc_set_cpu_type(unsigned int type)
 {
 	__mxc_cpu_type = type;
 }
 
+void imx_set_soc_revision(unsigned int rev)
+{
+	imx_soc_revision = rev;
+}
+
+unsigned int imx_get_soc_revision(void)
+{
+	return imx_soc_revision;
+}
+
 void imx_print_silicon_rev(const char *cpu, int srev)
 {
 	if (srev == IMX_CHIP_REVISION_UNKNOWN)
@@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base)
 	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
 	__raw_writel(reg, base + 0x50);
 }
+
+struct device * __init imx_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *root;
+	const char *soc_id;
+	int ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return NULL;
+
+	soc_dev_attr->family = "Freescale i.MX";
+
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+	of_node_put(root);
+	if (ret)
+		goto free_soc;
+
+	switch (__mxc_cpu_type) {
+	case MXC_CPU_MX1:
+		soc_id = "i.MX1";
+		break;
+	case MXC_CPU_MX21:
+		soc_id = "i.MX21";
+		break;
+	case MXC_CPU_MX25:
+		soc_id = "i.MX25";
+		break;
+	case MXC_CPU_MX27:
+		soc_id = "i.MX27";
+		break;
+	case MXC_CPU_MX31:
+		soc_id = "i.MX31";
+		break;
+	case MXC_CPU_MX35:
+		soc_id = "i.MX35";
+		break;
+	case MXC_CPU_MX51:
+		soc_id = "i.MX51";
+		break;
+	case MXC_CPU_MX53:
+		soc_id = "i.MX53";
+		break;
+	case MXC_CPU_IMX6SL:
+		soc_id = "i.MX6SL";
+		break;
+	case MXC_CPU_IMX6DL:
+		soc_id = "i.MX6DL";
+		break;
+	case MXC_CPU_IMX6Q:
+		soc_id = "i.MX6Q";
+		break;
+	default:
+		soc_id = "Unknown";
+	}
+	soc_dev_attr->soc_id = soc_id;
+
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+					   (imx_soc_revision >> 4) & 0xf,
+					   imx_soc_revision & 0xf);
+	if (!soc_dev_attr->revision)
+		goto free_soc;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		goto free_rev;
+
+	return soc_device_to_device(soc_dev);
+
+free_rev:
+	kfree(soc_dev_attr->revision);
+free_soc:
+	kfree(soc_dev_attr);
+	return NULL;
+}
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index e02de188ae83..074b1a81ba76 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction epit_timer_irq = {
 	.name		= "i.MX EPIT Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= epit_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 44a65e9ff1fc..586e0171a652 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -90,7 +90,7 @@ void imx_gpc_restore_all(void)
 		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
 }
 
-static void imx_gpc_irq_unmask(struct irq_data *d)
+void imx_gpc_irq_unmask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
@@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d)
 	writel_relaxed(val, reg);
 }
 
-static void imx_gpc_irq_mask(struct irq_data *d)
+void imx_gpc_irq_mask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3daf1ed90579..b35e99cc5e5b 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu)
 	 * the register being cleared to kill the cpu.
 	 */
 	imx_set_cpu_arg(cpu, ~0);
-	cpu_do_idle();
+
+	while (1)
+		cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 53e43e579dd7..bece8a65e6f0 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
 	.handle_irq	= imx51_handle_irq,
-	.init_time	= imx51_timer_init,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 368a6e3f5926..58b864a3fc20 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
 
 	/* When supported the trigger type have to be BOTH */
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "sdhc-detect", data);
 
 	if (ret)
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 29ac8ee651d2..97f9c6297fcf 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 98c58944015a..c9c4d8d96931 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
 	.handle_irq	= imx53_handle_irq,
-	.init_time	= imx53_timer_init,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index a02f275a198d..d0cfb225ec9a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,11 +11,8 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/cpu.h>
-#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -25,13 +22,13 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/phy.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -40,150 +37,82 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static u32 chip_revision;
-
-int imx6q_revision(void)
-{
-	return chip_revision;
-}
-
-static void __init imx6q_init_revision(void)
-{
-	u32 rev = imx_anatop_get_digprog();
-
-	switch (rev & 0xff) {
-	case 0:
-		chip_revision = IMX_CHIP_REVISION_1_0;
-		break;
-	case 1:
-		chip_revision = IMX_CHIP_REVISION_1_1;
-		break;
-	case 2:
-		chip_revision = IMX_CHIP_REVISION_1_2;
-		break;
-	default:
-		chip_revision = IMX_CHIP_REVISION_UNKNOWN;
-	}
-
-	mxc_set_cpu_type(rev >> 16 & 0xff);
-}
-
-static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-{
-	struct device_node *np;
-	void __iomem *wdog_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
-	wdog_base = of_iomap(np, 0);
-	if (!wdog_base)
-		goto soft;
-
-	imx_src_prepare_restart();
-
-	/* enable wdog */
-	writew_relaxed(1 << 2, wdog_base);
-	/* write twice to ensure the request will not get ignored */
-	writew_relaxed(1 << 2, wdog_base);
-
-	/* wait for reset to assert ... */
-	mdelay(500);
-
-	pr_err("Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-soft:
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
-		phy_write(phydev, 0x0b, 0x8105);
-		phy_write(phydev, 0x0c, 0x0000);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
 
 		/* max rx/tx clock delay, min rx/tx control delay */
-		phy_write(phydev, 0x0b, 0x8104);
-		phy_write(phydev, 0x0c, 0xf0f0);
-		phy_write(phydev, 0x0b, 0x104);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
 	}
 
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
+static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
 {
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	phy_write(dev, 0x0d, device);
+	phy_write(dev, 0x0e, reg);
+	phy_write(dev, 0x0d, (1 << 14) | device);
+	phy_write(dev, 0x0e, val);
 }
 
-static void __init imx6q_sabrelite_init(void)
+static int ksz9031rn_phy_fixup(struct phy_device *dev)
 {
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-				ksz9021rn_phy_fixup);
-	imx6q_sabrelite_cko1_setup();
+	/*
+	 * min rx data delay, max rx/tx clock delay,
+	 * min rx/tx control delay
+	 */
+	mmd_write_reg(dev, 2, 4, 0);
+	mmd_write_reg(dev, 2, 5, 0);
+	mmd_write_reg(dev, 2, 8, 0x003ff);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
+static int ar8031_phy_fixup(struct phy_device *dev)
 {
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	u16 val;
+
+	/* To enable AR8031 output a 125MHz clk from CLK_25M */
+	phy_write(dev, 0xd, 0x7);
+	phy_write(dev, 0xe, 0x8016);
+	phy_write(dev, 0xd, 0x4007);
+
+	val = phy_read(dev, 0xe);
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_init(void)
+#define PHY_ID_AR8031	0x004dd074
+
+static void __init imx6q_enet_phy_init(void)
 {
-	imx6q_sabresd_cko1_setup();
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
+				ksz9031rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+				ar8031_phy_fixup);
+	}
 }
 
 static void __init imx6q_1588_init(void)
@@ -192,29 +121,33 @@ static void __init imx6q_1588_init(void)
 
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
 }
-static void __init imx6q_usb_init(void)
-{
-	imx_anatop_usb_chrg_detect_disable();
-}
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_init();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
+	struct device *parent;
+
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx_get_soc_revision());
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	mxc_arch_reset_init_dt();
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	imx6q_enet_phy_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
 	imx6q_pm_init();
-	imx6q_usb_init();
 	imx6q_1588_init();
 }
 
@@ -243,17 +176,22 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
-		if (opp_disable(cpu_dev, 1200000000))
+		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
 
 put_node:
 	of_node_put(np);
 }
 
-static void __init imx6q_opp_init(struct device *cpu_dev)
+static void __init imx6q_opp_init(void)
 {
 	struct device_node *np;
+	struct device *cpu_dev = get_cpu_device(0);
 
+	if (!cpu_dev) {
+		pr_warn("failed to get cpu0 device\n");
+		return;
+	}
 	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		pr_warn("failed to find cpu0 node\n");
@@ -281,11 +219,11 @@ static void __init imx6q_init_late(void)
 	 * WAIT mode is broken on TO 1.0 and 1.1, so there is no point
 	 * to run cpuidle on them.
 	 */
-	if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
+	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
 		imx6q_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
-		imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
 }
@@ -296,57 +234,15 @@ static void __init imx6q_map_io(void)
 	imx_scu_map_io();
 }
 
-#ifdef CONFIG_CACHE_L2X0
-static void __init imx6q_init_l2cache(void)
-{
-	void __iomem *l2x0_base;
-	struct device_node *np;
-	unsigned int val;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
-	if (!np)
-		goto out;
-
-	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
-
-	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
-	val |= 0x70800000;
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
-
-	iounmap(l2x0_base);
-	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0UL);
-}
-#else
-static inline void imx6q_init_l2cache(void) {}
-#endif
-
 static void __init imx6q_init_irq(void)
 {
-	imx6q_init_revision();
-	imx6q_init_l2cache();
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6q_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx6q_revision());
-}
-
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
@@ -357,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
-	.init_time	= imx6q_timer_init,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
-	.restart	= imx6q_restart,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 132db2609507..2f952e3fcf89 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -7,36 +7,60 @@
  *
  */
 
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 
+static void __init imx6sl_fec_init(void)
+{
+	struct regmap *gpr;
+
+	/* set FEC clock from internal PLL clock source */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
+	}
+}
+
 static void __init imx6sl_init_machine(void)
 {
+	struct device *parent;
+
 	mxc_arch_reset_init_dt();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+	imx6sl_fec_init();
+	imx_anatop_init();
+	/* Reuse imx6q pm code */
+	imx6q_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)
 {
-	l2x0_of_init(0, ~0UL);
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6sl_timer_init(void)
-{
-	of_clk_init(NULL);
-}
-
 static const char *imx6sl_dt_compat[] __initdata = {
 	"fsl,imx6sl",
 	NULL,
@@ -45,7 +69,6 @@ static const char *imx6sl_dt_compat[] __initdata = {
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
 	.map_io		= debug_ll_io_init,
 	.init_irq	= imx6sl_init_irq,
-	.init_time	= imx6sl_timer_init,
 	.init_machine	= imx6sl_init_machine,
 	.dt_compat	= imx6sl_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 1ed916175d41..50044a21b388 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
 	}
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
-			  detect_irq, IRQF_DISABLED |
+			  detect_irq,
 			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			  "sdhc1-detect", data);
 	if (ret) {
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a27faaba98ec..c91894003da9 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -26,7 +26,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include "common.h"
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index bc0261e99d39..45303bd62902 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 #endif
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
+			IRQF_TRIGGER_FALLING, "sdhc-detect", data);
 	if (ret)
 		goto err_gpio_free_2;
 
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 816991deb9b8..af0cb8a9dc48 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -8,9 +8,7 @@
  */
 
 #include <linux/of_platform.h>
-#include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -28,12 +26,6 @@ static void __init vf610_init_irq(void)
 	irqchip_init();
 }
 
-static void __init vf610_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *vf610_dt_compat[] __initdata = {
 	"fsl,vf610",
 	NULL,
@@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = {
 
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
 	.init_irq	= vf610_init_irq,
-	.init_time	= vf610_init_time,
 	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index e065c117f5a6..5211f62c624e 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -61,25 +61,8 @@ void __init mx25_init_irq(void)
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
 }
 
-static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1255,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1120,
-	.per_2_shp_addr = 1329,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1560,
-	.mcu_2_ata_addr = 1479,
-	.app_2_per_addr = 1189,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1407,
-	.shp_2_mcu_addr = 979,
-};
-
 static struct sdma_platform_data imx25_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx25.bin",
-	.script_addrs = &imx25_sdma_script,
 };
 
 static const struct resource imx25_audmux_res[] __initconst = {
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index cf193d87274a..d1d52600f458 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -88,8 +89,15 @@ void __init imx51_init_early(void)
 
 void __init imx53_init_early(void)
 {
+	struct device_node *np;
+	void __iomem *base;
+
 	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	mxc_iomux_v3_init(base);
 	imx_src_init();
 }
 
@@ -100,25 +108,18 @@ void __init mx51_init_irq(void)
 
 void __init mx53_init_irq(void)
 {
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
-}
+	struct device_node *np;
+	void __iomem *base;
 
-static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1473,
-	.mcu_2_ata_addr = 1392,
-	.app_2_per_addr = 1033,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1251,
-	.shp_2_mcu_addr = 892,
-};
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	tzic_init_irq(base);
+}
 
 static struct sdma_platform_data imx51_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx51.bin",
-	.script_addrs = &imx51_sdma_script,
 };
 
 static const struct resource imx51_audmux_res[] __initconst = {
@@ -153,10 +154,10 @@ void __init imx51_soc_init(void)
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
-	imx51_pm_init();
+	imx5_pm_init();
 }
 
 void __init imx53_init_late(void)
 {
-	imx53_pm_init();
+	imx5_pm_init();
 }
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index d4361b80c5fb..649fe49ce85e 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 8629e5be7ecd..b08ab3ad4a6d 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,7 @@
 #define MXC_CPU_MX35		35
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
+#define MXC_CPU_IMX6SL		0x60
 #define MXC_CPU_IMX6DL		0x61
 #define MXC_CPU_IMX6Q		0x63
 
@@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6sl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SL;
+}
+
 static inline bool cpu_is_imx6dl(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6DL;
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 82e79c658eb2..58aeaf5baaf6 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -169,14 +169,9 @@ static int __init imx5_pm_common_init(void)
 	return imx5_cpuidle_init();
 }
 
-void __init imx51_pm_init(void)
+void __init imx5_pm_init(void)
 {
 	int ret = imx5_pm_common_init();
 	if (!ret)
 		suspend_set_ops(&mx5_suspend_ops);
 }
-
-void __init imx53_pm_init(void)
-{
-	imx5_pm_common_init();
-}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 204942749e21..aecd9f8037e0 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -10,9 +10,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/suspend.h>
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
@@ -22,6 +28,147 @@
 #include "common.h"
 #include "hardware.h"
 
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
+
+static void __iomem *ccm_base;
+
+void imx6q_set_chicken_bit(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_CHICKEN_BIT;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	struct irq_desc *iomuxc_irq_desc;
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Unmask the always pending IOMUXC interrupt #32 as wakeup source to
+	 * deassert dsm_request signal, so that we can ensure dsm_request
+	 * is not asserted when we're going to write CLPCR register to set LPM.
+	 * After setting up LPM bits, we need to mask this wakeup source.
+	 */
+	iomuxc_irq_desc = irq_to_desc(32);
+	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+	writel_relaxed(val, ccm_base + CLPCR);
+	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+
+	return 0;
+}
+
 static int imx6q_suspend_finish(unsigned long val)
 {
 	cpu_do_idle();
@@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
 		imx_gpc_pre_suspend();
 		imx_anatop_pre_suspend();
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
-		imx_smp_prepare();
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
 		imx_anatop_post_resume();
 		imx_gpc_post_resume();
+		imx6q_enable_rbc(false);
+		imx6q_enable_wb(false);
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
@@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+	ccm_base = base;
+}
+
 void __init imx6q_pm_init(void)
 {
+	struct regmap *gpr;
+
+	WARN_ON(!ccm_base);
+
+	/*
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+				   IMX6Q_GPR1_GINT);
+
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	suspend_set_ops(&imx6q_pm_ops);
 }
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 10a6b1a8c5ac..4754373e7e7d 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable)
 	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
+	val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
 	writel_relaxed(val, src_base + SRC_SCR);
 	spin_unlock(&scr_lock);
 }
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 6fe81bb4d3c9..e6edcd38b282 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -27,6 +27,7 @@
 #include <asm/system_misc.h>
 #include <asm/proc-fns.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "hardware.h"
@@ -41,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+	if (cpu_is_imx6q() || cpu_is_imx6dl())
+		imx_src_prepare_restart();
+
 	if (wdog_clk)
 		clk_enable(wdog_clk);
 
@@ -51,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 
 	/* Assert SRS signal */
 	__raw_writew(wcr_enable, wdog_base);
+	/* write twice to ensure the request will not get ignored */
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -95,3 +101,46 @@ void __init mxc_arch_reset_init_dt(void)
 
 	clk_prepare(wdog_clk);
 }
+
+#ifdef CONFIG_CACHE_L2X0
+void __init imx_init_l2cache(void)
+{
+	void __iomem *l2x0_base;
+	struct device_node *np;
+	unsigned int val;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	if (!np)
+		goto out;
+
+	l2x0_base = of_iomap(np, 0);
+	if (!l2x0_base) {
+		of_node_put(np);
+		goto out;
+	}
+
+	/* Configure the L2 PREFETCH and POWER registers */
+	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val |= 0x70800000;
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+	if (cpu_is_imx6q())
+		val &= ~(1 << 30 | 1 << 23);
+	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
+	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+
+	iounmap(l2x0_base);
+	of_node_put(np);
+
+out:
+	l2x0_of_init(0, ~0UL);
+}
+#endif
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529e9eaa..9b6638aadeaa 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction mxc_timer_irq = {
 	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= mxc_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/cm.h
index 202e6a57f100..4ecff7bff482 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/cm.h
@@ -1,9 +1,12 @@
 /*
- * update the core module control register.
+ * access the core module control register.
  */
+u32 cm_get(void);
 void cm_control(u32, u32);
 
-#define CM_CTRL	__io_address(INTEGRATOR_HDR_CTRL)
+struct device_node;
+void cm_init(void);
+void cm_clear_irqs(void);
 
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4cdfd7365925..00ddf20ed91b 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -22,77 +22,30 @@
 #include <linux/amba/serial.h>
 #include <linux/io.h>
 #include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/cm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
+#include "cm.h"
 #include "common.h"
 
-#ifdef CONFIG_ATAGS
-
-#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
-#define KMI0_IRQ		{ IRQ_KMIINT0 }
-#define KMI1_IRQ		{ IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "rtc", 0,
-	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "uart0", 0,
-	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0,
-	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
-
-static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&rtc_device,
-	&uart0_device,
-	&uart1_device,
-	&kmi0_device,
-	&kmi1_device,
-};
+static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
 
-int __init integrator_init(bool is_cp)
+/**
+ * cm_get - get the value from the CM_CTRL register
+ */
+u32 cm_get(void)
 {
-	int i;
-
-	/*
-	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
-	 * hard-code them. The Integator/CP and forward have proper cell IDs.
-	 * Else we leave them undefined to the bus driver can autoprobe them.
-	 */
-	if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
-		rtc_device.periphid	= 0x00041030;
-		uart0_device.periphid	= 0x00041010;
-		uart1_device.periphid	= 0x00041010;
-		kmi0_device.periphid	= 0x00041050;
-		kmi1_device.periphid	= 0x00041050;
-		uart0_device.dev.platform_data = &ap_uart_data;
-		uart1_device.dev.platform_data = &ap_uart_data;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	return 0;
+	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 }
 
-#endif
-
-static DEFINE_RAW_SPINLOCK(cm_lock);
-
 /**
  * cm_control - update the CM_CTRL register.
  * @mask: bits to change
@@ -104,12 +57,80 @@ void cm_control(u32 mask, u32 set)
 	u32 val;
 
 	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(CM_CTRL) & ~mask;
-	writel(val | set, CM_CTRL);
+	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 	raw_spin_unlock_irqrestore(&cm_lock, flags);
 }
 
-EXPORT_SYMBOL(cm_control);
+static const char *integrator_arch_str(u32 id)
+{
+	switch ((id >> 16) & 0xff) {
+	case 0x00:
+		return "ASB little-endian";
+	case 0x01:
+		return "AHB little-endian";
+	case 0x03:
+		return "AHB-Lite system bus, bi-endian";
+	case 0x04:
+		return "AHB";
+	case 0x08:
+		return "AHB system bus, ASB processor bus";
+	default:
+		return "Unknown";
+	}
+}
+
+static const char *integrator_fpga_str(u32 id)
+{
+	switch ((id >> 12) & 0xf) {
+	case 0x01:
+		return "XC4062";
+	case 0x02:
+		return "XC4085";
+	case 0x03:
+		return "XVC600";
+	case 0x04:
+		return "EPM7256AE (Altera PLD)";
+	default:
+		return "Unknown";
+	}
+}
+
+void cm_clear_irqs(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+		IRQ_ENABLE_CLEAR);
+}
+
+static const struct of_device_id cm_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+void cm_init(void)
+{
+	struct device_node *cm = of_find_matching_node(NULL, cm_match);
+	u32 val;
+
+	if (!cm) {
+		pr_crit("no core module node found in device tree\n");
+		return;
+	}
+	cm_base = of_iomap(cm, 0);
+	if (!cm_base) {
+		pr_crit("could not remap core module\n");
+		return;
+	}
+	cm_clear_irqs();
+	val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
+	pr_info("Detected ARM core module:\n");
+	pr_info("    Manufacturer: %02x\n", (val >> 24));
+	pr_info("    Architecture: %s\n", integrator_arch_str(val));
+	pr_info("    FPGA: %s\n", integrator_fpga_str(val));
+	pr_info("    Build: %02x\n", (val >> 4) & 0xFF);
+	pr_info("    Rev: %c\n", ('A' + (val & 0x03)));
+}
 
 /*
  * We need to stop things allocating the low memory; ideally we need a
@@ -145,27 +166,7 @@ static ssize_t intcp_get_arch(struct device *dev,
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *arch;
-
-	switch ((integrator_id >> 16) & 0xff) {
-	case 0x00:
-		arch = "ASB little-endian";
-		break;
-	case 0x01:
-		arch = "AHB little-endian";
-		break;
-	case 0x03:
-		arch = "AHB-Lite system bus, bi-endian";
-		break;
-	case 0x04:
-		arch = "AHB";
-		break;
-	default:
-		arch = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", arch);
+	return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
 }
 
 static struct device_attribute intcp_arch_attr =
@@ -175,24 +176,7 @@ static ssize_t intcp_get_fpga(struct device *dev,
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *fpga;
-
-	switch ((integrator_id >> 12) & 0xf) {
-	case 0x01:
-		fpga = "XC4062";
-		break;
-	case 0x02:
-		fpga = "XC4085";
-		break;
-	case 0x04:
-		fpga = "EPM7256AE (Altera PLD)";
-		break;
-	default:
-		fpga = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", fpga);
+	return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
 }
 
 static struct device_attribute intcp_fpga_attr =
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
deleted file mode 100644
index eff0adad9ae3..000000000000
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupt numbers, all of the above are just static reservations
- * used so they can be encoded into device resources. They will finally
- * be done away with when switching to device tree.
- */
-#define IRQ_PIC_START			64
-#define IRQ_SOFTINT			(IRQ_PIC_START+0)
-#define IRQ_UARTINT0			(IRQ_PIC_START+1)
-#define IRQ_UARTINT1			(IRQ_PIC_START+2)
-#define IRQ_KMIINT0			(IRQ_PIC_START+3)
-#define IRQ_KMIINT1			(IRQ_PIC_START+4)
-#define IRQ_TIMERINT0			(IRQ_PIC_START+5)
-#define IRQ_TIMERINT1			(IRQ_PIC_START+6)
-#define IRQ_TIMERINT2			(IRQ_PIC_START+7)
-#define IRQ_RTCINT			(IRQ_PIC_START+8)
-#define IRQ_AP_EXPINT0			(IRQ_PIC_START+9)
-#define IRQ_AP_EXPINT1			(IRQ_PIC_START+10)
-#define IRQ_AP_EXPINT2			(IRQ_PIC_START+11)
-#define IRQ_AP_EXPINT3			(IRQ_PIC_START+12)
-#define IRQ_AP_PCIINT0			(IRQ_PIC_START+13)
-#define IRQ_AP_PCIINT1			(IRQ_PIC_START+14)
-#define IRQ_AP_PCIINT2			(IRQ_PIC_START+15)
-#define IRQ_AP_PCIINT3			(IRQ_PIC_START+16)
-#define IRQ_AP_V3INT			(IRQ_PIC_START+17)
-#define IRQ_AP_CPINT0			(IRQ_PIC_START+18)
-#define IRQ_AP_CPINT1			(IRQ_PIC_START+19)
-#define IRQ_AP_LBUSTIMEOUT 		(IRQ_PIC_START+20)
-#define IRQ_AP_APCINT			(IRQ_PIC_START+21)
-#define IRQ_CP_CLCDCINT			(IRQ_PIC_START+22)
-#define IRQ_CP_MMCIINT0			(IRQ_PIC_START+23)
-#define IRQ_CP_MMCIINT1			(IRQ_PIC_START+24)
-#define IRQ_CP_AACIINT			(IRQ_PIC_START+25)
-#define IRQ_CP_CPPLDINT			(IRQ_PIC_START+26)
-#define IRQ_CP_ETHINT			(IRQ_PIC_START+27)
-#define IRQ_CP_TSPENINT			(IRQ_PIC_START+28)
-#define IRQ_PIC_END			(IRQ_PIC_START+28)
-
-#define IRQ_CIC_START			(IRQ_PIC_END+1)
-#define IRQ_CM_SOFTINT			(IRQ_CIC_START+0)
-#define IRQ_CM_COMMRX			(IRQ_CIC_START+1)
-#define IRQ_CM_COMMTX			(IRQ_CIC_START+2)
-#define IRQ_CIC_END			(IRQ_CIC_START+2)
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			(IRQ_CIC_END+1)
-#define IRQ_SIC_CP_SOFTINT		(IRQ_SIC_START+0)
-#define IRQ_SIC_CP_RI0			(IRQ_SIC_START+1)
-#define IRQ_SIC_CP_RI1			(IRQ_SIC_START+2)
-#define IRQ_SIC_CP_CARDIN		(IRQ_SIC_START+3)
-#define IRQ_SIC_CP_LMINT0		(IRQ_SIC_START+4)
-#define IRQ_SIC_CP_LMINT1		(IRQ_SIC_START+5)
-#define IRQ_SIC_CP_LMINT2		(IRQ_SIC_START+6)
-#define IRQ_SIC_CP_LMINT3		(IRQ_SIC_START+7)
-#define IRQ_SIC_CP_LMINT4		(IRQ_SIC_START+8)
-#define IRQ_SIC_CP_LMINT5		(IRQ_SIC_START+9)
-#define IRQ_SIC_CP_LMINT6		(IRQ_SIC_START+10)
-#define IRQ_SIC_CP_LMINT7		(IRQ_SIC_START+11)
-#define IRQ_SIC_END			(IRQ_SIC_START+11)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d9e95e612fcb..d50dc2dbfd89 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -51,13 +51,13 @@
 #include <asm/mach-types.h>
 
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "cm.h"
 #include "common.h"
 #include "pci_v3.h"
 
@@ -146,7 +146,7 @@ static int irq_suspend(void)
 static void irq_resume(void)
 {
 	/* disable all irq sources */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_clear_irqs();
 	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
@@ -402,8 +402,6 @@ void __init ap_init_early(void)
 {
 }
 
-#ifdef CONFIG_OF
-
 static void __init ap_of_timer_init(void)
 {
 	struct device_node *node;
@@ -450,8 +448,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
 
 static void __init ap_init_irq_of(void)
 {
-	/* disable core module IRQs */
-	writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(false);
 }
@@ -473,6 +470,11 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id ap_syscon_match[] = {
+	{ .compatible = "arm,integrator-ap-syscon"},
+	{ },
+};
+
 static void __init ap_init_of(void)
 {
 	unsigned long sc_dec;
@@ -489,7 +491,8 @@ static void __init ap_init_of(void)
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	syscon = of_find_node_by_path("/syscon");
+
+	syscon = of_find_matching_node(root, ap_syscon_match);
 	if (!syscon)
 		return;
 
@@ -541,7 +544,7 @@ static void __init ap_init_of(void)
 		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
 		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
 		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->irq = irq_of_parse_and_map(syscon, i);
 		lmdev->id = i;
 
 		lm_device_register(lmdev);
@@ -564,136 +567,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc ap_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init ap_map_io_atag(void)
-{
-	iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
-	ap_map_io();
-}
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-static struct platform_device pci_v3_device = {
-	.name		= "pci-v3",
-	.id		= 0,
-};
-
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	clk = clk_get_sys("ap_timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
-	integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
-				IRQ_TIMERINT1);
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-		-1, INTEGRATOR_SC_VALID_INT, NULL);
-	integrator_clk_init(false);
-}
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&pci_v3_device);
-	platform_device_register(&cfi_flash_device);
-
-	ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
-	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-
-	integrator_init(false);
-}
-
-MACHINE_START(INTEGRATOR, "ARM-Integrator")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= ap_map_io_atag,
-	.init_early	= ap_init_early,
-	.init_irq	= ap_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= ap_timer_init,
-	.init_machine	= ap_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 8c60fcb08a98..1df6e7602cad 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -36,9 +36,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
 
-#include <mach/cm.h>
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -50,6 +48,7 @@
 #include <plat/clcd.h>
 #include <plat/sched_clock.h>
 
+#include "cm.h"
 #include "common.h"
 
 /* Base address to the CP controller */
@@ -249,7 +248,6 @@ static void __init intcp_init_early(void)
 #endif
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -257,6 +255,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
 
 static void __init intcp_init_irq_of(void)
 {
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(true);
 }
@@ -287,6 +286,11 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id intcp_syscon_match[] = {
+	{ .compatible = "arm,integrator-cp-syscon"},
+	{ },
+};
+
 static void __init intcp_init_of(void)
 {
 	struct device_node *root;
@@ -301,7 +305,8 @@ static void __init intcp_init_of(void)
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	cpcon = of_find_node_by_path("/cpcon");
+
+	cpcon = of_find_matching_node(root, intcp_syscon_match);
 	if (!cpcon)
 		return;
 
@@ -354,175 +359,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc intcp_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init intcp_map_io_atag(void)
-{
-	iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
-	intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
-	intcp_map_io();
-}
-
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-#define INTCP_FLASH_SIZE		SZ_32M
-
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-#define INTCP_ETH_SIZE			0x10
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, cic_mask, sic_mask;
-
-	/* These masks are for the HW IRQ registers */
-	pic_mask = ~((~0u) << (11 - 0));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-		      -1, pic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-		      -1, cic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		      IRQ_CP_CPPLDINT, sic_mask, NULL);
-
-	integrator_clk_init(true);
-}
-
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static void __init cp_timer_init(void)
-{
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
-	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
-}
-
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
-static void __init intcp_init(void)
-{
-	int i;
-
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-	integrator_init(true);
-}
-
-MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= intcp_map_io_atag,
-	.init_early	= intcp_init_early,
-	.init_irq	= intcp_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= cp_timer_init,
-	.init_machine	= intcp_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7a7f6d3273bf..cb6ac58f5e07 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -11,10 +11,11 @@
 #include <linux/slab.h>
 #include <linux/leds.h>
 
-#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+#include "cm.h"
+
 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 
 #define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
@@ -78,7 +79,7 @@ static void cm_led_set(struct led_classdev *cdev,
 
 static enum led_brightness cm_led_get(struct led_classdev *cdev)
 {
-	u32 reg = readl(CM_CTRL);
+	u32 reg = cm_get();
 
 	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index bef100527c42..c5e01b24d9fb 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -36,7 +36,6 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/map.h>
 #include <asm/signal.h>
@@ -605,7 +604,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	return 1;
 }
 
-static irqreturn_t v3_irq(int dummy, void *devid)
+static irqreturn_t v3_irq(int irq, void *devid)
 {
 #ifdef CONFIG_DEBUG_LL
 	struct pt_regs *regs = get_irq_regs();
@@ -615,7 +614,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
 	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
-		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+		"ISTAT=%02x\n", irq, pc, instr,
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
 		v3_readb(V3_LB_ISTAT));
@@ -809,21 +808,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
 	return pci_common_swizzle(dev, pinp);
 }
 
-static int irq_tab[4] __initdata = {
-	IRQ_AP_PCIINT0,	IRQ_AP_PCIINT1,	IRQ_AP_PCIINT2,	IRQ_AP_PCIINT3
-};
-
-/*
- * map the specified device/slot/pin to an IRQ.  This works out such
- * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
- */
-static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int intnr = ((slot - 9) + (pin - 1)) & 3;
-
-	return irq_tab[intnr];
-}
-
 static struct hw_pci pci_v3 __initdata = {
 	.swizzle		= pci_v3_swizzle,
 	.setup			= pci_v3_setup,
@@ -833,32 +817,27 @@ static struct hw_pci pci_v3 __initdata = {
 	.postinit		= pci_v3_postinit,
 };
 
-#ifdef CONFIG_OF
-
-static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct of_irq oirq;
-	int ret;
-
-	ret = of_irq_map_pci(dev, &oirq);
-	if (ret) {
-		dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret);
-		/* Proper return code 0 == NO_IRQ */
-		return 0;
-	}
-
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-}
-
-static int __init pci_v3_dtprobe(struct platform_device *pdev,
-				struct device_node *np)
+static int __init pci_v3_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct of_pci_range_parser parser;
 	struct of_pci_range range;
 	struct resource *res;
 	int irq, ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
+		return -ENODEV;
+	}
+
+	/* Device tree probe path */
+	if (!np) {
+		dev_err(&pdev->dev, "no device tree node for PCIv3\n");
+		return -ENODEV;
+	}
+
 	if (of_pci_range_parser_init(&parser, np))
 		return -EINVAL;
 
@@ -919,77 +898,7 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	pci_v3.map_irq = pci_v3_map_irq_dt;
-	pci_common_init_dev(&pdev->dev, &pci_v3);
-
-	return 0;
-}
-
-#else
-
-static inline int pci_v3_dtprobe(struct platform_device *pdev,
-				  struct device_node *np)
-{
-	return -EINVAL;
-}
-
-#endif
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	/* Remap the Integrator system controller */
-	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-	if (!ap_syscon_base) {
-		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
-		return -ENODEV;
-	}
-
-	/* Device tree probe path */
-	if (np)
-		return pci_v3_dtprobe(pdev, np);
-
-	pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
-	if (!pci_v3_base) {
-		dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
-		return -ENODEV;
-	}
-
-	ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n",
-			ret);
-		return -ENODEV;
-	}
-
-	conf_mem.name = "PCIv3 config";
-	conf_mem.start = PHYS_PCI_CONFIG_BASE;
-	conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
-	conf_mem.flags = IORESOURCE_MEM;
-
-	io_mem.name = "PCIv3 I/O";
-	io_mem.start = PHYS_PCI_IO_BASE;
-	io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
-	io_mem.flags = IORESOURCE_MEM;
-
-	non_mem_pci = 0x00000000;
-	non_mem_pci_sz = SZ_256M;
-	non_mem.name = "PCIv3 non-prefetched mem";
-	non_mem.start = PHYS_PCI_MEM_BASE;
-	non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1;
-	non_mem.flags = IORESOURCE_MEM;
-
-	pre_mem_pci = 0x10000000;
-	pre_mem_pci_sz = SZ_256M;
-	pre_mem.name = "PCIv3 prefetched mem";
-	pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M;
-	pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1;
-	pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	pci_v3.map_irq = pci_v3_map_irq;
-
+	pci_v3.map_irq = of_irq_parse_and_map_pci;
 	pci_common_init_dev(&pdev->dev, &pci_v3);
 
 	return 0;
diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h
index 755fd29fed4a..06a9e2e7d007 100644
--- a/arch/arm/mach-integrator/pci_v3.h
+++ b/arch/arm/mach-integrator/pci_v3.h
@@ -1,2 +1,9 @@
 /* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
 extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 31fbb6c61b25..177cd073a83b 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -32,6 +32,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 static void __init em7210_timer_init(void)
 {
@@ -183,6 +184,7 @@ void em7210_power_off(void)
 
 static void __init em7210_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&em7210_serial_device);
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ac304705fe68..547b2342d61a 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -34,6 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * GLAN Tank timer tick configuration.
@@ -187,6 +188,7 @@ static void glantank_power_off(void)
 
 static void __init glantank_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&glantank_flash_device);
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
new file mode 100644
index 000000000000..3c7309c02029
--- /dev/null
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -0,0 +1,10 @@
+static struct resource iop32x_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iop32x_gpio_res,
+					ARRAY_SIZE(iop32x_gpio_res));
+}
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
deleted file mode 100644
index 708f4ec9db1d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 941f363aca56..56ec864ec313 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -19,7 +19,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index f2cd2966212d..0e1392b20d18 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -37,6 +37,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
@@ -283,6 +284,7 @@ void ep80219_power_off(void)
 
 static void __init iq31244_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq31244_flash_device);
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 015435de90dd..66782ff1f46a 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -33,6 +33,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * IQ80321 timer tick configuration.
@@ -170,6 +171,7 @@ static struct platform_device iq80321_serial_device = {
 
 static void __init iq80321_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq80321_flash_device);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 069144300b77..c1cd80ecc219 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * N2100 timer tick configuration.
@@ -288,8 +290,14 @@ static void n2100_power_off(void)
 
 static void n2100_restart(enum reboot_mode mode, const char *cmd)
 {
-	gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-	gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+	int ret;
+
+	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+	if (ret) {
+		pr_crit("could not drive reset GPIO low\n");
+		return;
+	}
+	/* Wait for reset to happen */
 	while (1)
 		;
 }
@@ -299,7 +307,7 @@ static struct timer_list power_button_poll_timer;
 
 static void power_button_poll(unsigned long dummy)
 {
-	if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
 		ctrl_alt_del();
 		return;
 	}
@@ -308,9 +316,37 @@ static void power_button_poll(unsigned long dummy)
 	add_timer(&power_button_poll_timer);
 }
 
+static int __init n2100_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_n2100())
+		return 0;
+
+	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+	if (ret)
+		pr_err("could not request reset GPIO\n");
+
+	ret = gpio_request(N2100_POWER_BUTTON, "power");
+	if (ret)
+		pr_err("could not request power GPIO\n");
+	else {
+		ret = gpio_direction_input(N2100_POWER_BUTTON);
+		if (ret)
+			pr_err("could not set power GPIO as input\n");
+	}
+	/* Set up power button poll timer */
+	init_timer(&power_button_poll_timer);
+	power_button_poll_timer.function = power_button_poll;
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+	return 0;
+}
+device_initcall(n2100_request_gpios);
 
 static void __init n2100_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);
@@ -321,11 +357,6 @@ static void __init n2100_init_machine(void)
 		ARRAY_SIZE(n2100_i2c_devices));
 
 	pm_power_off = n2100_power_off;
-
-	init_timer(&power_button_poll_timer);
-	power_button_poll_timer.function = power_button_poll;
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
 }
 
 MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
deleted file mode 100644
index ddd55bba9bb9..000000000000
--- a/arch/arm/mach-iop33x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index a89c0a234bff..c95122653094 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -18,7 +18,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c43304a10fa7..e2cb65cfbe23 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -122,8 +122,15 @@ static struct platform_device iq80331_flash_device = {
 	.resource	= &iq80331_flash_resource,
 };
 
+static struct resource iq80331_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80331_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80331_gpio_res,
+					ARRAY_SIZE(iq80331_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 8192987e78e5..0b6269d94f89 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -122,8 +122,15 @@ static struct platform_device iq80332_flash_device = {
 	.resource	= &iq80332_flash_resource,
 };
 
+static struct resource iq80332_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80332_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80332_gpio_res,
+					ARRAY_SIZE(iq80332_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 30e1ebe3a891..c342dc4e8a45 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -1,9 +1,5 @@
 if ARCH_IXP4XX
 
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
 menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5327decde5a0..9edaf4734fa8 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -81,6 +81,44 @@ void __init ixp4xx_map_io(void)
   	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 }
 
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
 
 /*************************************************************************
  * IXP4xx chipset IRQ handling
@@ -117,17 +155,6 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 	return -EINVAL;
 }
 
-int irq_to_gpio(unsigned int irq)
-{
-	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
-
-	if (gpio == -1)
-		return -EINVAL;
-
-	return gpio;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
 static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
 {
 	int line = irq2gpio[d->irq];
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 63de1b3fd06b..736dc692d540 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -26,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 
@@ -161,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = {
 
 static void dsmg600_power_off(void)
 {
-	/* enable the pwr cntl gpio */
-	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* poweroff */
-	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl and drive it high */
+	gpio_direction_output(DSMG600_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -202,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(DSMG600_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -228,6 +226,40 @@ static void __init dsmg600_timer_init(void)
     ixp4xx_timer_init();
 }
 
+static int __init dsmg600_gpio_init(void)
+{
+	if (!machine_is_dsmg600())
+		return 0;
+
+	gpio_request(DSMG600_RB_GPIO, "reset button");
+	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"DSM-G600 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(DSMG600_RB_GPIO));
+	}
+
+	/*
+	 * The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(DSMG600_PB_GPIO, "power button");
+	gpio_direction_input(DSMG600_PB_GPIO);
+	/* Request poweroff GPIO line */
+	gpio_request(DSMG600_PO_GPIO, "power off button");
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+	return 0;
+}
+device_initcall(dsmg600_gpio_init);
+
 static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
@@ -251,27 +283,6 @@ static void __init dsmg600_init(void)
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
 	pm_power_off = dsmg600_power_off;
-
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 4c4c6a6f4526..75c4c6572ad0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -131,44 +131,5 @@ struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 extern struct pci_ops ixp4xx_ops;
 
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
 #endif // __ASSEMBLY__
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 22d688b7d513..e7b8befa8729 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE) {
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
 			udelay(5);
 		} else
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
 
 		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
 		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
@@ -227,7 +228,8 @@ static void __init ixdp425_init(void)
 	ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
 	ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
 
-	gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+	gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
+	gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
 
 	/* Configure expansion bus for NAND Flash */
 	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index ed667ce9f576..507cb5233537 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -184,11 +184,8 @@ static void nas100d_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NAS100D_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(NAS100D_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nas100d_gpio_init(void)
+{
+	if (!machine_is_nas100d())
+		return 0;
+
+	/*
+	 * The power button on the Iomega NAS100d is on GPIO 14, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Request the power off GPIO */
+	gpio_request(NAS100D_PO_GPIO, "power off");
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(NAS100D_PB_GPIO, "power button");
+	gpio_direction_input(NAS100D_PB_GPIO);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+	return 0;
+}
+device_initcall(nas100d_gpio_init);
+
 static void __init nas100d_init(void)
 {
 	uint8_t __iomem *f;
@@ -278,19 +302,6 @@ static void __init nas100d_init(void)
 			gpio_to_irq(NAS100D_RB_GPIO));
 	}
 
-	/* The power button on the Iomega NAS100d is on GPIO 14, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
 	/*
 	 * Map in a portion of the flash and read the MAC address.
 	 * Since it is stored in BE in the flash itself, we need to
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 7e55236c26ea..ba5f1cda2a9d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -197,11 +197,8 @@ static void nslu2_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NSLU2_PO_GPIO, 1);
 }
 
 static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
@@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nslu2_gpio_init(void)
+{
+	if (!machine_is_nslu2())
+		return 0;
+
+	/* Request the power off GPIO */
+	return gpio_request(NSLU2_PO_GPIO, "power off");
+}
+device_initcall(nslu2_gpio_init);
+
 static void __init nslu2_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 51a50e996840..f20c53e75ed9 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -7,9 +7,10 @@ config ARCH_KEYSTONE
 	select HAVE_SMP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
+	select COMMON_CLK_KEYSTONE
+	select TI_EDMA
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ddc52b05dc84..25d92396fbfa 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -4,3 +4,6 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_SMP)			+= platsmp.o
+
+# PM domain driver for Keystone SOCs
+obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 14378e3fef16..5cf0683577ea 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -17,7 +17,6 @@
 #include <linux/io.h>
 
 #include <asm/smp_plat.h>
-#include <asm/prom.h>
 
 #include "keystone.h"
 
@@ -38,6 +37,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 }
 
 struct smp_operations keystone_smp_ops __initdata = {
-	.smp_init_cpus		= arm_dt_init_cpu_maps,
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
new file mode 100644
index 000000000000..29625232e954
--- /dev/null
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -0,0 +1,82 @@
+/*
+ * PM domain driver for Keystone2 devices
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *	Santosh Shilimkar <santosh.shillimkar@ti.com>
+ *
+ * Based on Kevins work on DAVINCI SOCs
+ *	Kevin Hilman <khilman@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int keystone_pm_runtime_suspend(struct device *dev)
+{
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_suspend(dev);
+	if (ret) {
+		pm_generic_runtime_resume(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int keystone_pm_runtime_resume(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	pm_clk_resume(dev);
+
+	return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static struct dev_pm_domain keystone_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend,
+				   keystone_pm_runtime_resume, NULL)
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
+
+static struct pm_clk_notifier_block platform_domain_notifier = {
+	.pm_domain = &keystone_pm_domain,
+};
+
+static struct of_device_id of_keystone_table[] = {
+	{.compatible = "ti,keystone"},
+	{ /* end of list */ },
+};
+
+int __init keystone_pm_runtime_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_keystone_table);
+	if (!np)
+		return 0;
+
+	of_clk_init(NULL);
+	pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
+
+	return 0;
+}
+subsys_initcall(keystone_pm_runtime_init);
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
index 9b9e4f7b241e..d15de8179fab 100644
--- a/arch/arm/mach-keystone/smc.S
+++ b/arch/arm/mach-keystone/smc.S
@@ -22,8 +22,7 @@
  * Return: Non zero value on failure
  */
 ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r12, lr}
+	stmfd   sp!, {r4-r11, lr}
 	smc	#0
-	dsb
-	ldmfd   sp!, {r4-r12, pc}
+	ldmfd   sp!, {r4-r11, pc}
 ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b634f9650a7b..fe8319ad3158 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -2,67 +2,32 @@ if ARCH_KIRKWOOD
 
 menu "Marvell Kirkwood Implementations"
 
+config KIRKWOOD_LEGACY
+	bool
+
 config MACH_D2NET_V2
 	bool "LaCie d2 Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network v2 NAS.
 
-config MACH_DOCKSTAR
-	bool "Seagate FreeAgent DockStar"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent DockStar.
-
-config MACH_ESATA_SHEEVAPLUG
-	bool "Marvell eSATA SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell eSATA SheevaPlug Reference Board.
-
-config MACH_GURUPLUG
-	bool "Marvell GuruPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board.
-
-config MACH_INETSPACE_V2
-	bool "LaCie Internet Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Internet Space v2 NAS.
-
-config MACH_MV88F6281GTW_GE
-	bool "Marvell 88F6281 GTW GE Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board.
-
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network v2 NAS.
 
 config MACH_NET5BIG_V2
 	bool "LaCie 5Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
-config MACH_NETSPACE_MAX_V2
-	bool "LaCie Network Space Max v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space Max v2 NAS.
-
-config MACH_NETSPACE_V2
-	bool "LaCie Network Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space v2 NAS.
-
 config MACH_OPENRD
+	select KIRKWOOD_LEGACY
         bool
 
 config MACH_OPENRD_BASE
@@ -88,30 +53,28 @@ config MACH_OPENRD_ULTIMATE
 
 config MACH_RD88F6192_NAS
 	bool "Marvell RD-88F6192-NAS Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6192-NAS Reference Board.
 
 config MACH_RD88F6281
 	bool "Marvell RD-88F6281 Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
-config MACH_SHEEVAPLUG
-	bool "Marvell SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell SheevaPlug Reference Board.
-
 config MACH_T5325
 	bool "HP t5325 Thin Client"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP t5325 Thin Client.
 
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
@@ -119,6 +82,7 @@ config MACH_TS219
 
 config MACH_TS41X
 	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
@@ -129,6 +93,9 @@ comment "Device tree entries"
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
 	select KIRKWOOD_CLK
+	select OF_IRQ
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select POWER_SUPPLY
 	select POWER_RESET
 	select POWER_RESET_GPIO
@@ -139,184 +106,12 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_CLOUDBOX_DT
-	bool "LaCie CloudBox NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  CloudBox NAS, using Flattened Device Tree.
-
-config MACH_DB88F628X_BP_DT
-	bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
-	help
-	  Say 'Y' here if you want your kernel to support the Marvell
-	  DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
-	  Device Tree).
-
-config MACH_DLINK_KIRKWOOD_DT
-	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
-	  using Flattened Device Tree.
-
-config MACH_DOCKSTAR_DT
-	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
+config MACH_MV88F6281GTW_GE_DT
+	bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
+	depends on ARCH_KIRKWOOD_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_DREAMPLUG_DT
-	bool "Marvell DreamPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
-	bool "Seagate GoFlex Net (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_GURUPLUG_DT
-	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board (Flattened Device Tree).
-
-config MACH_IB62X0_DT
-	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
-	  Flattened Device Tree.
-
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_INETSPACE_V2_DT
-	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_IOMEGA_IX2_200_DT
-	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Iomega StorCenter ix2-200 (Flattened Device Tree).
-
-config MACH_KM_KIRKWOOD_DT
-	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-
-config MACH_LSXL_DT
-	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select POWER_RESET_RESTART
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
-	  Flattened Device Tree.
-
-config MACH_MPLCEC4_DT
-	bool "MPL CEC4 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  MPL CEC4 (Flattened Device Tree).
-
-config MACH_NETSPACE_LITE_V2_DT
-	bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
-	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
-	bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Mini v2 NAS using Flattened Device Tree.
-
-	  This board is embedded in a product named CloudBox, which
-	  provides automatic backup on a 100GB cloud storage. This
-	  should not confused with a more recent LaCie NAS also named
-	  CloudBox. For this last, the disk capacity is 1TB or above.
-
-config MACH_NETSPACE_V2_DT
-	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space v2 NAS, using Flattened Device Tree.
-
-config MACH_OPENBLOCKS_A6_DT
-	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
-config MACH_READYNAS_DT
-	bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
-
-config MACH_SHEEVAPLUG_DT
-	bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell (eSATA) SheevaPlug (Flattened Device Tree).
-
-config MACH_TOPKICK_DT
-	bool "USI Topkick (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  USI Topkick, using Flattened Device Tree
-
-config MACH_TS219_DT
-	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	select POWER_RESET_QNAP
-	help
-	  Say 'Y' here if you want your kernel to support the QNAP
-	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
-	  TS-219P+ Turbo NAS devices using Fattened Device Tree.
-	  There are two different Device Tree descriptions, depending
-	  on if the device is based on an if the board uses the MV6281
-	  or MV6282. If you have the wrong one, the buttons will not
-	  work.
+	  Marvell 88F6281 GTW GE Board (Flattened Device Tree).
 
 endmenu
 
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index ac4cd75dd499..144b51102939 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,44 +1,16 @@
-obj-y				+= common.o irq.o pcie.o mpp.o
+obj-y				+= common.o pcie.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_PM)		+= pm.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
-obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
-obj-$(CONFIG_MACH_DB88F628X_BP_DT)	+= board-db88f628x-bp.o
-obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
-obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
-obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
-obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
-obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
-obj-$(CONFIG_MACH_MPLCEC4_DT)		+= board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
-obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
-obj-$(CONFIG_MACH_SHEEVAPLUG_DT)	+= board-sheevaplug.o
-obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
-obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT)	+= board-mv88f6281gtw_ge.o
diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c
deleted file mode 100644
index 2f574bc8ed40..000000000000
--- a/arch/arm/mach-kirkwood/board-db88f628x-bp.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Saeed Bishara <saeed@marvell.com>
- *
- * Marvell DB-88F628{1,2}-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init db88f628x_init(void)
-{
-	kirkwood_ge00_init(&db88f628x_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
deleted file mode 100644
index a1aa87f09180..000000000000
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
- *
- * arch/arm/mach-kirkwood/board-dnskw.c
- *
- * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/* Register any GPIO for output and set the value */
-static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
-{
-	if (gpio_request(gpio, name) == 0 &&
-	    gpio_direction_output(gpio, 0) == 0) {
-		gpio_set_value(gpio, def);
-		if (gpio_export(gpio, 0) != 0)
-			pr_err("dnskw: Failed to export GPIO %s\n", name);
-	} else
-		pr_err("dnskw: Failed to register %s\n", name);
-}
-
-void __init dnskw_init(void)
-{
-	kirkwood_ge00_init(&dnskw_ge00_data);
-
-	/* Set NAS to turn back on after a power failure */
-	dnskw_gpio_register(37, "dnskw:power:recover", 1);
-}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
deleted file mode 100644
index d7196db33984..000000000000
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dockstar_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
deleted file mode 100644
index 0903242c00dc..000000000000
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dreamplug_ge00_data);
-	kirkwood_ge01_init(&dreamplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 6e122ed3282f..9caa4fe95913 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -13,8 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,18 +45,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_PEX0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_PEX1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_SDIO;
-	orion_clkdev_add(NULL, "mvsdio",
-			 of_clk_get_from_provider(&clkspec));
-
 	/*
 	 * The ethernet interfaces forget the MAC address assigned by
 	 * u-boot if the clocks are turned off. Until proper DT support
@@ -60,19 +52,90 @@ static void __init kirkwood_legacy_clk_init(void)
 	 */
 	clkspec.args[0] = CGC_BIT_GE0;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
 	clk_prepare_enable(clk);
 
 	clkspec.args[0] = CGC_BIT_GE1;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
 	clk_prepare_enable(clk);
 }
 
-static void __init kirkwood_of_clk_init(void)
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
 {
-	of_clk_init(NULL);
-	kirkwood_legacy_clk_init();
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) || of_get_mac_address(np))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		       np->full_name);
+
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
 }
 
 static void __init kirkwood_dt_init(void)
@@ -87,120 +150,36 @@ static void __init kirkwood_dt_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
-	kirkwood_setup_wins();
+	BUG_ON(mvebu_mbus_dt_init());
 
 	kirkwood_l2_init();
 
 	kirkwood_cpufreq_init();
-
-	/* Setup root of clk tree */
-	kirkwood_of_clk_init();
-
 	kirkwood_cpuidle_init();
+	/* Setup clocks for legacy devices */
+	kirkwood_legacy_clk_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 
-	if (of_machine_is_compatible("globalscale,dreamplug"))
-		dreamplug_init();
-
-	if (of_machine_is_compatible("globalscale,guruplug"))
-		guruplug_dt_init();
-
-	if (of_machine_is_compatible("globalscale,sheevaplug"))
-		sheevaplug_dt_init();
-
-	if (of_machine_is_compatible("dlink,dns-kirkwood"))
-		dnskw_init();
-
-	if (of_machine_is_compatible("iom,iconnect"))
-		iconnect_init();
-
-	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
-		ib62x0_init();
-
-	if (of_machine_is_compatible("qnap,ts219"))
-		qnap_dt_ts219_init();
-
-	if (of_machine_is_compatible("seagate,dockstar"))
-		dockstar_dt_init();
-
-	if (of_machine_is_compatible("seagate,goflexnet"))
-		goflexnet_init();
-
-	if (of_machine_is_compatible("buffalo,lsxl"))
-		lsxl_init();
-
-	if (of_machine_is_compatible("iom,ix2-200"))
-		iomega_ix2_200_init();
-
-	if (of_machine_is_compatible("keymile,km_kirkwood"))
-		km_kirkwood_init();
-
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,inetspace_v2") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_max_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
-	    of_machine_is_compatible("lacie,netspace_v2"))
-		ns2_init();
-
-	if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
-	    of_machine_is_compatible("marvell,db-88f6282-bp"))
-		db88f628x_init();
-
-	if (of_machine_is_compatible("mpl,cec4"))
-		mplcec4_init();
-
-	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
-		netgear_readynas_init();
-
-	if (of_machine_is_compatible("plathome,openblocks-a6"))
-		openblocks_a6_init();
-
-	if (of_machine_is_compatible("usi,topkick"))
-		usi_topkick_init();
+	if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
+		mv88f6281gtw_ge_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] = {
-	"globalscale,dreamplug",
-	"globalscale,guruplug",
-	"globalscale,sheevaplug",
-	"dlink,dns-320",
-	"dlink,dns-325",
-	"iom,iconnect",
-	"raidsonic,ib-nas62x0",
-	"qnap,ts219",
-	"seagate,dockstar",
-	"seagate,goflexnet",
-	"buffalo,lsxl",
-	"iom,ix2-200",
-	"keymile,km_kirkwood",
-	"lacie,cloudbox",
-	"lacie,inetspace_v2",
-	"lacie,netspace_lite_v2",
-	"lacie,netspace_max_v2",
-	"lacie,netspace_mini_v2",
-	"lacie,netspace_v2",
-	"marvell,db-88f6281-bp",
-	"marvell,db-88f6282-bp",
-	"mpl,cec4",
-	"netgear,readynas-duo-v2",
-	"plathome,openblocks-a6",
-	"usi,topkick",
-	"zyxel,nsa310",
+	"marvell,kirkwood",
 	NULL
 };
 
 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
 	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= kirkwood_timer_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
deleted file mode 100644
index 9db979aec82e..000000000000
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
deleted file mode 100644
index a857163954a5..000000000000
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-guruplug.c
- *
- * Marvell Guruplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init guruplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
deleted file mode 100644
index 9a857ae83984..000000000000
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&ib62x0_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
deleted file mode 100644
index 98b5ad1bba90..000000000000
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_ge00_init(&iconnect_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
deleted file mode 100644
index e5f70415905a..000000000000
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
- *
- * Iomega StorCenter ix2-200
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
-	.phy_addr       = MV643XX_ETH_PHY_NONE,
-	.speed          = SPEED_1000,
-	.duplex         = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iomega_ix2_200_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
-	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
deleted file mode 100644
index 44e4605ba0bf..000000000000
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
- * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * arch/arm/mach-kirkwood/board-km_kirkwood.c
- *
- * Keymile km_kirkwood Reference Desing Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init km_kirkwood_init(void)
-{
-	struct clk *sata_clk;
-	/*
-	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
-	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
-	 * devices are also not present in this variant, their clocks get
-	 * disabled because unused when clk_disable_unused() gets called.
-	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
-	 */
-	sata_clk = clk_get_sys("sata_mv.0", "0");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-	sata_clk = clk_get_sys("sata_mv.0", "1");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-
-	kirkwood_ge00_init(&km_kirkwood_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
deleted file mode 100644
index 348395238df6..000000000000
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 (C), Michael Walle <michael@walle.cc>
- *
- * arch/arm/mach-kirkwood/board-lsxl.c
- *
- * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init lsxl_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-
-	kirkwood_ge00_init(&lsxl_ge00_data);
-	kirkwood_ge01_init(&lsxl_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
deleted file mode 100644
index 938712e248f1..000000000000
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2012 MPL AG, Switzerland
- * Stefan Peter <s.peter@mpl.ch>
- *
- * arch/arm/mach-kirkwood/board-mplcec4.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
-};
-
-void __init mplcec4_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&mplcec4_ge00_data);
-	kirkwood_ge01_init(&mplcec4_ge01_data);
-}
-
-
-
diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
new file mode 100644
index 000000000000..ee5eea678c11
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+void __init mv88f6281gtw_ge_init(void)
+{
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+}
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
deleted file mode 100644
index f8f660525ace..000000000000
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2"))
-		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	kirkwood_ge00_init(&ns2_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
deleted file mode 100644
index b11d8fdeca93..000000000000
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&openblocks_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
deleted file mode 100644
index 341b82d9cadb..000000000000
--- a/arch/arm/mach-kirkwood/board-readynas.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
- * converted to DT.
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init netgear_readynas_init(void)
-{
-	kirkwood_ge00_init(&netgear_readynas_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c
deleted file mode 100644
index fa389373ca74..000000000000
--- a/arch/arm/mach-kirkwood/board-sheevaplug.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-sheevaplug.c
- *
- * Marvell Sheevaplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init sheevaplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
deleted file mode 100644
index 860f44ab457d..000000000000
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
- *
- * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
- *
- * Based on the board file ts219-setup.c:
- *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init qnap_dt_ts219_init(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID)
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
deleted file mode 100644
index 1cc04ec33f0b..000000000000
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&topkick_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1663de090984..f3407a5db216 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -37,6 +37,12 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR   0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR   0x01
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
-
-	mvebu_mbus_init("marvell,kirkwood-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 int kirkwood_tclk;
@@ -666,10 +668,14 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_setup_wins(void)
 {
-	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
-			      KIRKWOOD_NAND_MEM_SIZE);
-	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
-			      KIRKWOOD_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+				    KIRKWOOD_MBUS_NAND_ATTR,
+				    KIRKWOOD_NAND_MEM_PHYS_BASE,
+				    KIRKWOOD_NAND_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+				    KIRKWOOD_MBUS_SRAM_ATTR,
+				    KIRKWOOD_SRAM_PHYS_BASE,
+				    KIRKWOOD_SRAM_SIZE);
 }
 
 void __init kirkwood_l2_init(void)
@@ -697,6 +703,10 @@ void __init kirkwood_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
+	BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
+
 	kirkwood_setup_wins();
 
 	kirkwood_l2_init();
@@ -711,6 +721,7 @@ void __init kirkwood_init(void)
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
+	kirkwood_pm_init();
 	kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fcf3ba682e24..05fd648df543 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,120 +58,17 @@ void kirkwood_cpufreq_init(void);
 void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
-#ifdef CONFIG_MACH_GURUPLUG_DT
-void guruplug_dt_init(void);
-#else
-static inline void guruplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_SHEEVAPLUG_DT
-void sheevaplug_dt_init(void);
-#else
-static inline void sheevaplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_TS219_DT
-void qnap_dt_ts219_init(void);
-#else
-static inline void qnap_dt_ts219_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
-void dnskw_init(void);
-#else
-static inline void dnskw_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DOCKSTAR_DT
-void dockstar_dt_init(void);
-#else
-static inline void dockstar_dt_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_LSXL_DT
-void lsxl_init(void);
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
 #else
-static inline void lsxl_init(void) {};
+static inline void kirkwood_pm_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
-void iomega_ix2_200_init(void);
-#else
-static inline void iomega_ix2_200_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
-void km_kirkwood_init(void);
-#else
-static inline void km_kirkwood_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DB88F628X_BP_DT
-void db88f628x_init(void);
-#else
-static inline void db88f628x_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_MPLCEC4_DT
-void mplcec4_init(void);
-#else
-static inline void mplcec4_init(void) {};
-#endif
-
-#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
-void ns2_init(void);
-#else
-static inline void ns2_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
-void openblocks_a6_init(void);
-#else
-static inline void openblocks_a6_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_READYNAS_DT
-void netgear_readynas_init(void);
-#else
-static inline void netgear_readynas_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_TOPKICK_DT
-void usi_topkick_init(void);
-#else
-static inline void usi_topkick_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_CLOUDBOX_DT
-void cloudbox_init(void);
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
+void mv88f6281gtw_ge_init(void);
 #else
-static inline void cloudbox_init(void) {};
+static inline void mv88f6281gtw_ge_init(void) {};
 #endif
 
 /* early init functions not converted to fdt yet */
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
deleted file mode 100644
index 060ccf9cb63f..000000000000
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/dockstar-setup.c
- *
- * Seagate FreeAgent DockStar Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition dockstar_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct gpio_led dockstar_led_pins[] = {
-	{
-		.name			= "dockstar:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "dockstar:orange:misc",
-		.default_trigger	= "none",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data dockstar_led_data = {
-	.leds		= dockstar_led_pins,
-	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
-};
-
-static struct platform_device dockstar_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dockstar_led_data,
-	}
-};
-
-static unsigned int dockstar_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED green */
-	MPP47_GPIO,	/* LED orange */
-	0
-};
-
-static void __init dockstar_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(dockstar_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&dockstar_ge00_data);
-
-	platform_device_register(&dockstar_leds);
-}
-
-MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-	.atag_offset	= 0x100,
-	.init_machine	= dockstar_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
deleted file mode 100644
index 08dd739aa709..000000000000
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/guruplug-setup.c
- *
- * Marvell GuruPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition guruplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data guruplug_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-	.gpio_card_detect = -1,
-	.gpio_write_protect = -1,
-};
-
-static struct gpio_led guruplug_led_pins[] = {
-	{
-		.name			= "guruplug:red:health",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:health",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:red:wmode",
-		.gpio			= 48,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:wmode",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data guruplug_led_data = {
-	.leds		= guruplug_led_pins,
-	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
-};
-
-static struct platform_device guruplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &guruplug_led_data,
-	}
-};
-
-static unsigned int guruplug_mpp_config[] __initdata = {
-	MPP46_GPIO,	/* M_RLED */
-	MPP47_GPIO,	/* M_GLED */
-	MPP48_GPIO,	/* B_RLED */
-	MPP49_GPIO,	/* B_GLED */
-	0
-};
-
-static void __init guruplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(guruplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-	kirkwood_sata_init(&guruplug_sata_data);
-	kirkwood_sdio_init(&guruplug_mvsdio_data);
-
-	platform_device_register(&guruplug_leds);
-}
-
-MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
-	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= guruplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 91242c944d7a..8b9d1c9ff199 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -78,4 +78,6 @@
 #define CGC_TDM			(1 << 20)
 #define CGC_RESERVED		(0x6 << 21)
 
+#define MEMORY_PM_CTRL		(BRIDGE_VIRT_BASE + 0x118)
+
 #endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
deleted file mode 100644
index ba384b992bef..000000000000
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
-	.type		= "mx25l12805d",
-};
-
-static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 50000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 47,
-		.desc		= "SWR Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 46,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
-	.buttons	= mv88f6281gtw_ge_button_pins,
-	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv88f6281gtw_ge_button_data,
-	},
-};
-
-static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
-	{
-		.name		= "gtw:green:Status",
-		.gpio		= 20,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:red:Status",
-		.gpio		= 21,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:green:USB",
-		.gpio		= 12,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
-	.leds		= mv88f6281gtw_ge_led_pins,
-	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv88f6281gtw_ge_led_data,
-	},
-};
-
-static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
-	MPP12_GPO,	/* Status#_USB pin  */
-	MPP20_GPIO,	/* Status#_GLED pin */
-	MPP21_GPIO,	/* Status#_RLED pin */
-	MPP46_GPIO,	/* WPS_Switch pin   */
-	MPP47_GPIO,	/* SW_Init pin      */
-	0
-};
-
-static void __init mv88f6281gtw_ge_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
-				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_uart0_init();
-	platform_device_register(&mv88f6281gtw_ge_leds);
-	platform_device_register(&mv88f6281gtw_ge_buttons);
-}
-
-static int __init mv88f6281gtw_ge_pci_init(void)
-{
-	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(mv88f6281gtw_ge_pci_init);
-
-MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv88f6281gtw_ge_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
deleted file mode 100644
index 3b706611da8e..000000000000
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netspace_v2-setup.c
- *
- * LaCie Network Space v2 board setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/gpio-fan.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netspace_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETSPACE_V2_PUSH_BUTTON		32
-
-static struct gpio_keys_button netspace_v2_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= NETSPACE_V2_PUSH_BUTTON,
-		.desc		= "Power push button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data netspace_v2_button_data = {
-	.buttons	= netspace_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
-};
-
-static struct platform_device netspace_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_RED_LED	12
-
-static struct gpio_led netspace_v2_gpio_led_pins[] = {
-	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
-	.leds		= netspace_v2_gpio_led_pins,
-};
-
-static struct platform_device netspace_v2_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_gpio_leds_data,
-	},
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
-static struct ns2_led netspace_v2_led_pins[] = {
-	{
-		.name	= "ns_v2:blue:sata",
-		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-	},
-};
-
-static struct ns2_led_platform_data netspace_v2_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
-	.leds		= netspace_v2_led_pins,
-};
-
-static struct platform_device netspace_v2_leds = {
-	.name		= "leds-ns2",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_leds_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO fan
- ****************************************************************************/
-
-/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
-static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
-	{    0,  0 },
-	{ 1500,	15 },
-	{ 1700,	14 },
-	{ 1800,	13 },
-	{ 2100,	12 },
-	{ 3100,	11 },
-	{ 3300,	10 },
-	{ 4300,	 9 },
-	{ 5500,	 8 },
-};
-
-static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
-
-static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
-	.gpio		= 25,
-	.active_low	= 1,
-};
-
-static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(netspace_max_v2_fan_ctrl),
-	.ctrl		= netspace_max_v2_fan_ctrl,
-	.alarm		= &netspace_max_v2_fan_alarm,
-	.num_speed	= ARRAY_SIZE(netspace_max_v2_fan_speed),
-	.speed		= netspace_max_v2_fan_speed,
-};
-
-static struct platform_device netspace_max_v2_gpio_fan = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &netspace_max_v2_fan_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int netspace_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
-#define NETSPACE_V2_GPIO_POWER_OFF	31
-
-static void netspace_v2_power_off(void)
-{
-	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netspace_v2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(netspace_v2_mpp_config);
-
-	if (machine_is_netspace_max_v2())
-		lacie_v2_hdd_power_init(2);
-	else
-		lacie_v2_hdd_power_init(1);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&netspace_v2_ge00_data);
-	kirkwood_sata_init(&netspace_v2_sata_data);
-	kirkwood_uart0_init();
-	lacie_v2_register_flash();
-	lacie_v2_register_i2c_devices();
-
-	platform_device_register(&netspace_v2_leds);
-	platform_device_register(&netspace_v2_gpio_leds);
-	platform_device_register(&netspace_v2_gpio_buttons);
-	if (machine_is_netspace_max_v2())
-		platform_device_register(&netspace_max_v2_gpio_fan);
-
-	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = netspace_v2_power_off;
-	else
-		pr_err("netspace_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NETSPACE_V2
-MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_INETSPACE_V2
-MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NETSPACE_MAX_V2
-MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 6a6eb548307d..e5cf84103583 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -158,7 +158,8 @@ static void __init openrd_init(void)
 	kirkwood_mpp_conf(openrd_mpp_config);
 
 	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+	kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
+			   25);
 
 	kirkwood_ehci_init();
 
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ddcb09f5bdd3..12d86f39f380 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -20,6 +20,16 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR      0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR       0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR      0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR       0xd0
+
 static void kirkwood_enable_pcie_clk(const char *port)
 {
 	struct clk *clk;
@@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 void __init kirkwood_pcie_init(unsigned int portmask)
 {
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE0_IO_ATTR,
 					  KIRKWOOD_PCIE_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE_IO_SIZE,
-					  KIRKWOOD_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
+				    KIRKWOOD_PCIE_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE1_IO_ATTR,
 					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE1_IO_SIZE,
-					  KIRKWOOD_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  KIRKWOOD_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
+				    KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE1_MEM_SIZE);
 
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
 
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
new file mode 100644
index 000000000000..8783a7184e73
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -0,0 +1,73 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, MEMORY_PM_CTRL);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	suspend_set_ops(&kirkwood_suspend_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index d24223166e06..5154bd2a3ad3 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -87,7 +87,9 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
-	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
+	kirkwood_nand_init(rd88f6281_nand_parts,
+			   ARRAY_SIZE(rd88f6281_nand_parts),
+			   25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
deleted file mode 100644
index 55b68fa39f45..000000000000
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/sheevaplug-setup.c
- *
- * Marvell SheevaPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition sheevaplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data sheeva_esata_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
-	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
-	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
-};
-
-static struct gpio_led sheevaplug_led_pins[] = {
-	{
-		.name			= "plug:red:misc",
-		.default_trigger	= "none",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "plug:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data sheevaplug_led_data = {
-	.leds		= sheevaplug_led_pins,
-	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
-};
-
-static struct platform_device sheevaplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &sheevaplug_led_data,
-	}
-};
-
-static unsigned int sheevaplug_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED Red */
-	MPP49_GPIO,	/* LED */
-	0
-};
-
-static unsigned int sheeva_esata_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP44_GPIO,	/* SD Write Protect */
-	MPP47_GPIO,	/* SD Card Detect */
-	MPP49_GPIO,	/* LED Green */
-	0
-};
-
-static void __init sheevaplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_mpp_conf(sheeva_esata_mpp_config);
-	else
-		kirkwood_mpp_conf(sheevaplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-
-	/* honor lower power consumption for plugs with out eSATA */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sata_init(&sheeva_esata_sata_data);
-
-	/* enable sd wp and sd cd on plugs with esata */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
-	else
-		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
-
-	platform_device_register(&sheevaplug_leds);
-}
-
-#ifdef CONFIG_MACH_SHEEVAPLUG
-MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
-	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
-MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 456d6386edf8..9f9c0441a917 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -20,7 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 095c155d6fb8..9b702a1dc7b0 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o devices.o time.o irq.o
+obj-y				+= common.o devices.o time.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 991d7e9877de..cf445bae6d77 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,7 +3,6 @@
 
 extern void timer_init(int irq);
 
-extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
 extern void __init pxa168_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
deleted file mode 100644
index bd152e24e6d7..000000000000
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/irq.h>
-#include <mach/regs-icu.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-	and	\tmp, \tmp, #0xff00
-	cmp	\tmp, #0x5800
-	ldr	\base, =mmp_icu_base
-	ldr	\base, [\base, #0]
-	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
-	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\tmp, [\base, #0]
-	and	\irqnr, \tmp, #0x3f
-	tst	\tmp, #(1 << 6)
-	.endm
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
deleted file mode 100644
index 13219ebf5128..000000000000
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_GPIO_H
-#define __ASM_MACH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/cputype.h>
-
-#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 459c2d03eb5c..a83ba7cb525d 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
 #include <linux/reboot.h>
 
 extern void pxa168_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(enum reboot_mode, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b914afa1fcdc..92253203f5b4 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -2,6 +2,7 @@
 #define __ASM_MACH_PXA910_H
 
 extern void pxa910_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
deleted file mode 100644
index 3c71246cd994..000000000000
--- a/arch/arm/mach-mmp/irq.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *  Copyright (C) 2008 - 2012 Marvell Technology Group Ltd.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *              Haojian Zhuang <haojian.zhuang@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <mach/irqs.h>
-
-#ifdef CONFIG_CPU_MMP2
-#include <mach/pm-mmp2.h>
-#endif
-#ifdef CONFIG_CPU_PXA910
-#include <mach/pm-pxa910.h>
-#endif
-
-#include "common.h"
-
-#define MAX_ICU_NR		16
-
-struct icu_chip_data {
-	int			nr_irqs;
-	unsigned int		virq_base;
-	unsigned int		cascade_irq;
-	void __iomem		*reg_status;
-	void __iomem		*reg_mask;
-	unsigned int		conf_enable;
-	unsigned int		conf_disable;
-	unsigned int		conf_mask;
-	unsigned int		clr_mfp_irq_base;
-	unsigned int		clr_mfp_hwirq;
-	struct irq_domain	*domain;
-};
-
-struct mmp_intc_conf {
-	unsigned int	conf_enable;
-	unsigned int	conf_disable;
-	unsigned int	conf_mask;
-};
-
-void __iomem *mmp_icu_base;
-static struct icu_chip_data icu_data[MAX_ICU_NR];
-static int max_icu_nr;
-
-extern void mmp2_clear_pmic_int(void);
-
-static void icu_mask_ack_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_disable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-#ifdef CONFIG_CPU_MMP2
-		if ((data->virq_base == data->clr_mfp_irq_base)
-			&& (hwirq == data->clr_mfp_hwirq))
-			mmp2_clear_pmic_int();
-#endif
-		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_disable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_enable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-		r = readl_relaxed(data->reg_mask) & ~(1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_ack_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_domain *domain;
-	struct icu_chip_data *data;
-	int i;
-	unsigned long mask, status, n;
-
-	for (i = 1; i < max_icu_nr; i++) {
-		if (irq == icu_data[i].cascade_irq) {
-			domain = icu_data[i].domain;
-			data = (struct icu_chip_data *)domain->host_data;
-			break;
-		}
-	}
-	if (i >= max_icu_nr) {
-		pr_err("Spurious irq %d in MMP INTC\n", irq);
-		return;
-	}
-
-	mask = readl_relaxed(data->reg_mask);
-	while (1) {
-		status = readl_relaxed(data->reg_status) & ~mask;
-		if (status == 0)
-			break;
-		for_each_set_bit(n, &status, BITS_PER_LONG) {
-			generic_handle_irq(icu_data[i].virq_base + n);
-		}
-	}
-}
-
-static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq,
-			      irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-	set_irq_flags(irq, IRQF_VALID);
-	return 0;
-}
-
-static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node,
-				const u32 *intspec, unsigned int intsize,
-				unsigned long *out_hwirq,
-				unsigned int *out_type)
-{
-	*out_hwirq = intspec[0];
-	return 0;
-}
-
-const struct irq_domain_ops mmp_irq_domain_ops = {
-	.map		= mmp_irq_domain_map,
-	.xlate		= mmp_irq_domain_xlate,
-};
-
-static struct mmp_intc_conf mmp_conf = {
-	.conf_enable	= 0x51,
-	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
-};
-
-static struct mmp_intc_conf mmp2_conf = {
-	.conf_enable	= 0x20,
-	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
-};
-
-/* MMP (ARMv5) */
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	max_icu_nr = 1;
-	mmp_icu_base = ioremap(0xd4282000, 0x1000);
-	icu_data[0].conf_enable = mmp_conf.conf_enable;
-	icu_data[0].conf_disable = mmp_conf.conf_disable;
-	icu_data[0].conf_mask = mmp_conf.conf_mask;
-	icu_data[0].nr_irqs = 64;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[0]);
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_default_host(icu_data[0].domain);
-#ifdef CONFIG_CPU_PXA910
-	icu_irq_chip.irq_set_wake = pxa910_set_wake;
-#endif
-}
-
-/* MMP2 (ARMv7) */
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	max_icu_nr = 8;
-	mmp_icu_base = ioremap(0xd4282000, 0x1000);
-	icu_data[0].conf_enable = mmp2_conf.conf_enable;
-	icu_data[0].conf_disable = mmp2_conf.conf_disable;
-	icu_data[0].conf_mask = mmp2_conf.conf_mask;
-	icu_data[0].nr_irqs = 64;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[0]);
-	icu_data[1].reg_status = mmp_icu_base + 0x150;
-	icu_data[1].reg_mask = mmp_icu_base + 0x168;
-	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
-	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
-	icu_data[1].nr_irqs = 2;
-	icu_data[1].cascade_irq = 4;
-	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
-	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
-						   icu_data[1].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[1]);
-	icu_data[2].reg_status = mmp_icu_base + 0x154;
-	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
-	icu_data[2].nr_irqs = 2;
-	icu_data[2].cascade_irq = 5;
-	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
-	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
-						   icu_data[2].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[2]);
-	icu_data[3].reg_status = mmp_icu_base + 0x180;
-	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
-	icu_data[3].nr_irqs = 3;
-	icu_data[3].cascade_irq = 9;
-	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
-	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
-						   icu_data[3].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[3]);
-	icu_data[4].reg_status = mmp_icu_base + 0x158;
-	icu_data[4].reg_mask = mmp_icu_base + 0x170;
-	icu_data[4].nr_irqs = 5;
-	icu_data[4].cascade_irq = 17;
-	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
-	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
-						   icu_data[4].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[4]);
-	icu_data[5].reg_status = mmp_icu_base + 0x15c;
-	icu_data[5].reg_mask = mmp_icu_base + 0x174;
-	icu_data[5].nr_irqs = 15;
-	icu_data[5].cascade_irq = 35;
-	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
-	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
-						   icu_data[5].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[5]);
-	icu_data[6].reg_status = mmp_icu_base + 0x160;
-	icu_data[6].reg_mask = mmp_icu_base + 0x178;
-	icu_data[6].nr_irqs = 2;
-	icu_data[6].cascade_irq = 51;
-	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
-	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
-						   icu_data[6].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[6]);
-	icu_data[7].reg_status = mmp_icu_base + 0x188;
-	icu_data[7].reg_mask = mmp_icu_base + 0x184;
-	icu_data[7].nr_irqs = 2;
-	icu_data[7].cascade_irq = 55;
-	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
-	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
-						   icu_data[7].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[7]);
-	for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_KEYPAD_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_MIPI_HSI1_MUX:
-		case IRQ_MMP2_MIPI_HSI0_MUX:
-			irq_set_chip(irq, &icu_irq_chip);
-			irq_set_chained_handler(irq, icu_mux_irq_demux);
-			break;
-		default:
-			irq_set_chip_and_handler(irq, &icu_irq_chip,
-						 handle_level_irq);
-			break;
-		}
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_default_host(icu_data[0].domain);
-#ifdef CONFIG_CPU_MMP2
-	icu_irq_chip.irq_set_wake = mmp2_set_wake;
-#endif
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id intc_ids[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
-	{ .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
-	{}
-};
-
-static const struct of_device_id mmp_mux_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp2-mux-intc" },
-	{}
-};
-
-int __init mmp2_mux_init(struct device_node *parent)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	struct resource res;
-	int i, irq_base, ret, irq;
-	u32 nr_irqs, mfp_irq;
-
-	node = parent;
-	max_icu_nr = 1;
-	for (i = 1; i < MAX_ICU_NR; i++) {
-		node = of_find_matching_node(node, mmp_mux_irq_match);
-		if (!node)
-			break;
-		of_id = of_match_node(&mmp_mux_irq_match[0], node);
-		ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
-					   &nr_irqs);
-		if (ret) {
-			pr_err("Not found mrvl,intc-nr-irqs property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		ret = of_address_to_resource(node, 0, &res);
-		if (ret < 0) {
-			pr_err("Not found reg property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		icu_data[i].reg_status = mmp_icu_base + res.start;
-		ret = of_address_to_resource(node, 1, &res);
-		if (ret < 0) {
-			pr_err("Not found reg property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		icu_data[i].reg_mask = mmp_icu_base + res.start;
-		icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
-		if (!icu_data[i].cascade_irq) {
-			ret = -EINVAL;
-			goto err;
-		}
-
-		irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
-		if (irq_base < 0) {
-			pr_err("Failed to allocate IRQ numbers for mux intc\n");
-			ret = irq_base;
-			goto err;
-		}
-		if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
-					  &mfp_irq)) {
-			icu_data[i].clr_mfp_irq_base = irq_base;
-			icu_data[i].clr_mfp_hwirq = mfp_irq;
-		}
-		irq_set_chained_handler(icu_data[i].cascade_irq,
-					icu_mux_irq_demux);
-		icu_data[i].nr_irqs = nr_irqs;
-		icu_data[i].virq_base = irq_base;
-		icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs,
-							   irq_base, 0,
-							   &mmp_irq_domain_ops,
-							   &icu_data[i]);
-		for (irq = irq_base; irq < irq_base + nr_irqs; irq++)
-			icu_mask_irq(irq_get_irq_data(irq));
-	}
-	max_icu_nr = i;
-	return 0;
-err:
-	of_node_put(node);
-	max_icu_nr = i;
-	return ret;
-}
-
-void __init mmp_dt_irq_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	struct mmp_intc_conf *conf;
-	int nr_irqs, irq_base, ret, irq;
-
-	node = of_find_matching_node(NULL, intc_ids);
-	if (!node) {
-		pr_err("Failed to find interrupt controller in arch-mmp\n");
-		return;
-	}
-	of_id = of_match_node(intc_ids, node);
-	conf = of_id->data;
-
-	ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
-	if (ret) {
-		pr_err("Not found mrvl,intc-nr-irqs property\n");
-		return;
-	}
-
-	mmp_icu_base = of_iomap(node, 0);
-	if (!mmp_icu_base) {
-		pr_err("Failed to get interrupt controller register\n");
-		return;
-	}
-
-	irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0);
-	if (irq_base < 0) {
-		pr_err("Failed to allocate IRQ numbers\n");
-		goto err;
-	} else if (irq_base != NR_IRQS_LEGACY) {
-		pr_err("ICU's irqbase should be started from 0\n");
-		goto err;
-	}
-	icu_data[0].conf_enable = conf->conf_enable;
-	icu_data[0].conf_disable = conf->conf_disable;
-	icu_data[0].conf_mask = conf->conf_mask;
-	icu_data[0].nr_irqs = nr_irqs;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0,
-						   &mmp_irq_domain_ops,
-						   &icu_data[0]);
-	irq_set_default_host(icu_data[0].domain);
-	for (irq = 0; irq < nr_irqs; irq++)
-		icu_mask_irq(irq_get_irq_data(irq));
-	mmp2_mux_init(node);
-	return;
-err:
-	iounmap(mmp_icu_base);
-}
-#endif
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index b37915dc4470..cca529ceecb7 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -9,17 +9,13 @@
  *  publishhed by the Free Software Foundation.
  */
 
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
@@ -64,7 +60,6 @@ static const char *mmp_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa168_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
@@ -72,7 +67,6 @@ MACHINE_END
 
 DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa910_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 4ac256720f7d..023cb453f157 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -10,18 +10,13 @@
  */
 
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/regs-apbc.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
@@ -49,7 +44,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= mmp2_dt_init,
 	.dt_compat	= mmp2_dt_board_compat,
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index c7592f168bbd..a70b5530bd42 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -26,6 +28,7 @@
 #include <mach/mfp.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
+#include <mach/pm-mmp2.h>
 
 #include "common.h"
 
@@ -94,6 +97,9 @@ void mmp2_clear_pmic_int(void)
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = mmp2_set_wake;
+#endif
 }
 
 static int __init mmp2_init(void)
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index ce6393acad86..eb57ee196842 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -23,6 +25,8 @@
 #include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/devices.h>
+#include <mach/pm-pxa910.h>
+#include <mach/pxa910.h>
 
 #include "common.h"
 
@@ -79,6 +83,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
 void __init pxa910_init_irq(void)
 {
 	icu_init_irq();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = pxa910_set_wake;
+#endif
 }
 
 static int __init pxa910_init(void)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8483906d4308..cfadd974f5ce 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
 #include <linux/interrupt.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/mfd/88pm860x.h>
@@ -191,7 +191,6 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = {
 #define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
 /* link config */
 #define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
-#define CFG_GRA_SWAPRB(x)      (x << 0) /* 1: rbswap enabled */
 static struct mmp_mach_path_config dkb_disp_config[] = {
 	[0] = {
 		.name = "mmp-parallel",
@@ -199,8 +198,7 @@ static struct mmp_mach_path_config dkb_disp_config[] = {
 		.output_type = PATH_OUT_PARALLEL,
 		.path_config = CFG_IOPADMODE(0x1)
 			| SCLK_SOURCE_SELECT(0x1),
-		.link_config = CFG_DUMBMODE(0x2)
-			| CFG_GRA_SWAPRB(0x1),
+		.link_config = CFG_DUMBMODE(0x2),
 	},
 };
 
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 905efc8cac79..2586c2865874 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
 if ARCH_MSM
 
 comment "Qualcomm MSM SoC Type"
-	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on ARCH_MSM_DT
 
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on !ARCH_MSM_DT
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -49,7 +49,6 @@ config ARCH_MSM8X60
 	select GPIO_MSM_V2
 	select HAVE_SMP
 	select MSM_SCM if SMP
-	select USE_OF
 
 config ARCH_MSM8960
 	bool "MSM8960"
@@ -58,6 +57,11 @@ config ARCH_MSM8960
 	select HAVE_SMP
 	select GPIO_MSM_V2
 	select MSM_SCM if SMP
+
+config ARCH_MSM_DT
+	def_bool y
+	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	select SPARSE_IRQ
 	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
@@ -68,6 +72,7 @@ config MSM_SOC_REV_A
 
 config  ARCH_MSM_ARM11
 	bool
+
 config  ARCH_MSM_SCORPION
 	bool
 
@@ -75,6 +80,7 @@ config  MSM_VIC
 	bool
 
 menu "Qualcomm MSM Board Type"
+	depends on !ARCH_MSM_DT
 
 config MACH_HALIBUT
 	depends on ARCH_MSM
@@ -122,6 +128,7 @@ config MSM_SMD
 
 config MSM_GPIOMUX
 	bool
+	depends on !ARCH_MSM_DT
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d257ff40e16b..7ed4c1b2bdd2 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,17 +1,16 @@
-obj-y += io.o timer.o
+obj-y += timer.o
 obj-y += clock.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
-obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
 
 obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
 obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 
 obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
 
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
+obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
+obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
 
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
@@ -27,7 +26,6 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
-obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
deleted file mode 100644
index 492f5cd87b0a..000000000000
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/board.h>
-#include "common.h"
-
-static void __init msm8x60_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.smp = smp_ops(msm_smp_ops),
-	.map_io = msm_map_msm8x60_io,
-	.init_machine = msm8x60_dt_init,
-	.init_late = msm8x60_init_late,
-	.init_time	= msm_dt_timer_init,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt.c
index bb5530957c4f..16e6183ac9f1 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,26 +11,22 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
 
-static void __init msm_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const msm8960_dt_match[] __initconst = {
+static const char * const msm_dt_match[] __initconst = {
+	"qcom,msm8660-fluid",
+	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
 	NULL
 };
 
-DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
-	.map_io = msm_map_msm8960_io,
-	.init_time	= msm_dt_timer_init,
-	.init_machine = msm_dt_init,
-	.dt_compat = msm8960_dt_match,
+	.dt_compat = msm_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 803651ad4f62..a77529887cbc 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -29,7 +29,6 @@
 #include <asm/setup.h>
 
 #include <mach/irqs.h>
-#include <mach/board.h>
 #include <mach/msm_iomap.h>
 
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 30c3496db593..7d9981cb400e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -28,12 +28,12 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/hardware.h>
 
 #include "board-mahimahi.h"
 #include "devices.h"
 #include "proc_comm.h"
+#include "common.h"
 
 static uint debug_uart;
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index db3d8c0bc8a4..f9af5a46e8b6 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -30,7 +30,6 @@
 #include <asm/memory.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
 
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index f14a73d86bc0..5f933bc50783 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 70730111b37c..327605174d63 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -28,7 +28,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <mach/vreg.h>
-#include <mach/board.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -41,6 +40,7 @@
 #include "board-sapphire.h"
 #include "proc_comm.h"
 #include "devices.h"
+#include "common.h"
 
 void msm_init_irq(void);
 void msm_init_gpio(void);
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 64a46eb4fc49..ccf6621bc664 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -25,7 +25,6 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 651851c3e1dd..b2379ede43bc 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -4,7 +4,7 @@
 #ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
 #define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
 
-#include <mach/board.h>
+#include "common.h"
 
 #define MSM_SMI_BASE		0x00000000
 #define MSM_SMI_SIZE		0x00800000
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 421cf7751a80..33c7725adae2 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -14,13 +14,10 @@
 
 extern void msm7x01_timer_init(void);
 extern void msm7x30_timer_init(void);
-extern void msm_dt_timer_init(void);
 extern void qsd8x50_timer_init(void);
 
 extern void msm_map_common_io(void);
 extern void msm_map_msm7x30_io(void);
-extern void msm_map_msm8x60_io(void);
-extern void msm_map_msm8960_io(void);
 extern void msm_map_qsd8x50_io(void);
 
 extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
@@ -29,4 +26,19 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 extern struct smp_operations msm_smp_ops;
 extern void msm_cpu_die(unsigned int cpu);
 
+struct msm_mmc_platform_data;
+
+extern void msm_add_devices(void);
+extern void msm_init_irq(void);
+extern void msm_init_gpio(void);
+extern int msm_add_sdcc(unsigned int controller,
+			struct msm_mmc_platform_data *plat,
+			unsigned int stat_irq, unsigned long stat_irq_flags);
+
+#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
+extern int smd_debugfs_init(void);
+#else
+static inline int smd_debugfs_init(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
deleted file mode 100644
index 0fb7a17df398..000000000000
--- a/arch/arm/mach-msm/devices-iommu.c
+++ /dev/null
@@ -1,912 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <mach/irqs.h>
-#include <mach/iommu.h>
-
-static struct resource msm_iommu_jpegd_resources[] = {
-	{
-		.start = 0x07300000,
-		.end   = 0x07300000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vpe_resources[] = {
-	{
-		.start = 0x07400000,
-		.end   = 0x07400000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp0_resources[] = {
-	{
-		.start = 0x07500000,
-		.end   = 0x07500000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp1_resources[] = {
-	{
-		.start = 0x07600000,
-		.end   = 0x07600000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_rot_resources[] = {
-	{
-		.start = 0x07700000,
-		.end   = 0x07700000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_ijpeg_resources[] = {
-	{
-		.start = 0x07800000,
-		.end   = 0x07800000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vfe_resources[] = {
-	{
-		.start = 0x07900000,
-		.end   = 0x07900000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_a_resources[] = {
-	{
-		.start = 0x07A00000,
-		.end   = 0x07A00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_b_resources[] = {
-	{
-		.start = 0x07B00000,
-		.end   = 0x07B00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx3d_resources[] = {
-	{
-		.start = 0x07C00000,
-		.end   = 0x07C00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d0_resources[] = {
-	{
-		.start = 0x07D00000,
-		.end   = 0x07D00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d1_resources[] = {
-	{
-		.start = 0x07E00000,
-		.end   = 0x07E00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_root_iommu_dev = {
-	.name = "msm_iommu",
-	.id = -1,
-};
-
-static struct msm_iommu_dev jpegd_iommu = {
-	.name = "jpegd",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vpe_iommu = {
-	.name = "vpe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp0_iommu = {
-	.name = "mdp0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp1_iommu = {
-	.name = "mdp1",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev rot_iommu = {
-	.name = "rot",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev ijpeg_iommu = {
-	.name = "ijpeg",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vfe_iommu = {
-	.name = "vfe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_a_iommu = {
-	.name = "vcodec_a",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_b_iommu = {
-	.name = "vcodec_b",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx3d_iommu = {
-	.name = "gfx3d",
-	.ncb = 3,
-};
-
-static struct msm_iommu_dev gfx2d0_iommu = {
-	.name = "gfx2d0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx2d1_iommu = {
-	.name = "gfx2d1",
-	.ncb = 2,
-};
-
-static struct platform_device msm_device_iommu_jpegd = {
-	.name = "msm_iommu",
-	.id = 0,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
-	.resource = msm_iommu_jpegd_resources,
-};
-
-static struct platform_device msm_device_iommu_vpe = {
-	.name = "msm_iommu",
-	.id = 1,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
-	.resource = msm_iommu_vpe_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp0 = {
-	.name = "msm_iommu",
-	.id = 2,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
-	.resource = msm_iommu_mdp0_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp1 = {
-	.name = "msm_iommu",
-	.id = 3,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
-	.resource = msm_iommu_mdp1_resources,
-};
-
-static struct platform_device msm_device_iommu_rot = {
-	.name = "msm_iommu",
-	.id = 4,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
-	.resource = msm_iommu_rot_resources,
-};
-
-static struct platform_device msm_device_iommu_ijpeg = {
-	.name = "msm_iommu",
-	.id = 5,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
-	.resource = msm_iommu_ijpeg_resources,
-};
-
-static struct platform_device msm_device_iommu_vfe = {
-	.name = "msm_iommu",
-	.id = 6,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
-	.resource = msm_iommu_vfe_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_a = {
-	.name = "msm_iommu",
-	.id = 7,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
-	.resource = msm_iommu_vcodec_a_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_b = {
-	.name = "msm_iommu",
-	.id = 8,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
-	.resource = msm_iommu_vcodec_b_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx3d = {
-	.name = "msm_iommu",
-	.id = 9,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
-	.resource = msm_iommu_gfx3d_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx2d0 = {
-	.name = "msm_iommu",
-	.id = 10,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
-	.resource = msm_iommu_gfx2d0_resources,
-};
-
-struct platform_device msm_device_iommu_gfx2d1 = {
-	.name = "msm_iommu",
-	.id = 11,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources),
-	.resource = msm_iommu_gfx2d1_resources,
-};
-
-static struct msm_iommu_ctx_dev jpegd_src_ctx = {
-	.name = "jpegd_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
-	.name = "jpegd_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_src_ctx = {
-	.name = "vpe_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_dst_ctx = {
-	.name = "vpe_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
-	.name = "mdp_vg1",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
-	.name = "mdp_rgb1",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
-	.name = "mdp_vg2",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
-	.name = "mdp_rgb2",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_src_ctx = {
-	.name = "rot_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_dst_ctx = {
-	.name = "rot_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
-	.name = "ijpeg_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
-	.name = "ijpeg_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
-	.name = "vfe_imgwr",
-	.num = 0,
-	.mids = {2, 3, 4, 5, 6, 7, 8, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_misc_ctx = {
-	.name = "vfe_misc",
-	.num = 1,
-	.mids = {0, 1, 9, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
-	.name = "vcodec_a_stream",
-	.num = 0,
-	.mids = {2, 5, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
-	.name = "vcodec_a_mm1",
-	.num = 1,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
-	.name = "vcodec_b_mm2",
-	.num = 0,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_user_ctx = {
-	.name = "gfx3d_user",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_priv_ctx = {
-	.name = "gfx3d_priv",
-	.num = 1,
-	.mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
-		 31, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = {
-	.name = "gfx2d0_2d0",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = {
-	.name = "gfx2d1_2d1",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct platform_device msm_device_jpegd_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 0,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_jpegd_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 1,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 2,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 3,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 4,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 5,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 6,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 7,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 8,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 9,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 10,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 11,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_imgwr_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 12,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_misc_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 13,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_stream_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 14,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_mm1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 15,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_b_mm2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 16,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_b.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_user_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 17,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_priv_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 18,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d0_2d0_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 19,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d0.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d1_2d1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 20,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d1.dev,
-	},
-};
-
-static struct platform_device *msm_iommu_devs[] = {
-	&msm_device_iommu_jpegd,
-	&msm_device_iommu_vpe,
-	&msm_device_iommu_mdp0,
-	&msm_device_iommu_mdp1,
-	&msm_device_iommu_rot,
-	&msm_device_iommu_ijpeg,
-	&msm_device_iommu_vfe,
-	&msm_device_iommu_vcodec_a,
-	&msm_device_iommu_vcodec_b,
-	&msm_device_iommu_gfx3d,
-	&msm_device_iommu_gfx2d0,
-	&msm_device_iommu_gfx2d1,
-};
-
-static struct msm_iommu_dev *msm_iommu_data[] = {
-	&jpegd_iommu,
-	&vpe_iommu,
-	&mdp0_iommu,
-	&mdp1_iommu,
-	&rot_iommu,
-	&ijpeg_iommu,
-	&vfe_iommu,
-	&vcodec_a_iommu,
-	&vcodec_b_iommu,
-	&gfx3d_iommu,
-	&gfx2d0_iommu,
-	&gfx2d1_iommu,
-};
-
-static struct platform_device *msm_iommu_ctx_devs[] = {
-	&msm_device_jpegd_src_ctx,
-	&msm_device_jpegd_dst_ctx,
-	&msm_device_vpe_src_ctx,
-	&msm_device_vpe_dst_ctx,
-	&msm_device_mdp_vg1_ctx,
-	&msm_device_mdp_rgb1_ctx,
-	&msm_device_mdp_vg2_ctx,
-	&msm_device_mdp_rgb2_ctx,
-	&msm_device_rot_src_ctx,
-	&msm_device_rot_dst_ctx,
-	&msm_device_ijpeg_src_ctx,
-	&msm_device_ijpeg_dst_ctx,
-	&msm_device_vfe_imgwr_ctx,
-	&msm_device_vfe_misc_ctx,
-	&msm_device_vcodec_a_stream_ctx,
-	&msm_device_vcodec_a_mm1_ctx,
-	&msm_device_vcodec_b_mm2_ctx,
-	&msm_device_gfx3d_user_ctx,
-	&msm_device_gfx3d_priv_ctx,
-	&msm_device_gfx2d0_2d0_ctx,
-	&msm_device_gfx2d1_2d1_ctx,
-};
-
-static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
-	&jpegd_src_ctx,
-	&jpegd_dst_ctx,
-	&vpe_src_ctx,
-	&vpe_dst_ctx,
-	&mdp_vg1_ctx,
-	&mdp_rgb1_ctx,
-	&mdp_vg2_ctx,
-	&mdp_rgb2_ctx,
-	&rot_src_ctx,
-	&rot_dst_ctx,
-	&ijpeg_src_ctx,
-	&ijpeg_dst_ctx,
-	&vfe_imgwr_ctx,
-	&vfe_misc_ctx,
-	&vcodec_a_stream_ctx,
-	&vcodec_a_mm1_ctx,
-	&vcodec_b_mm2_ctx,
-	&gfx3d_user_ctx,
-	&gfx3d_priv_ctx,
-	&gfx2d0_2d0_ctx,
-	&gfx2d1_2d1_ctx,
-};
-
-static int __init msm8x60_iommu_init(void)
-{
-	int ret, i;
-
-	ret = platform_device_register(&msm_root_iommu_dev);
-	if (ret != 0) {
-		pr_err("Failed to register root IOMMU device!\n");
-		goto failure;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_devs[i],
-					       msm_iommu_data[i],
-					       sizeof(struct msm_iommu_dev));
-		if (ret != 0) {
-			pr_err("platform_device_add_data failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-
-		ret = platform_device_register(msm_iommu_devs[i]);
-
-		if (ret != 0) {
-			pr_err("platform_device_register iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_ctx_devs[i],
-					       msm_iommu_ctx_data[i],
-					       sizeof(*msm_iommu_ctx_devs[i]));
-		if (ret != 0) {
-			pr_err("platform_device_add_data iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-
-		ret = platform_device_register(msm_iommu_ctx_devs[i]);
-		if (ret != 0) {
-			pr_err("platform_device_register ctx failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-	}
-	return 0;
-
-failure_unwind2:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-failure_unwind:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-failure:
-	return ret;
-}
-
-static void __exit msm8x60_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-}
-
-subsys_initcall(msm8x60_iommu_init);
-module_exit(msm8x60_iommu_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 14e286948f69..c15ea8ab20a7 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -21,10 +21,10 @@
 #include <mach/irqs.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
-#include <mach/board.h>
 
 #include "devices.h"
 #include "smd_private.h"
+#include "common.h"
 
 #include <asm/mach/flash.h>
 
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 2ed89b25d304..9e1e9ce07b1a 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -21,9 +21,9 @@
 #include <mach/irqs.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
-#include <mach/board.h>
 
 #include "devices.h"
+#include "common.h"
 
 #include <asm/mach/flash.h>
 
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
deleted file mode 100644
index c34e246a3e07..000000000000
--- a/arch/arm/mach-msm/include/mach/board.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-msm/include/mach/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags);
-
-#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
-int smd_debugfs_init(void);
-#else
-static inline int smd_debugfs_init(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
deleted file mode 100644
index 5c7c955e6d25..000000000000
--- a/arch/arm/mach-msm/include/mach/iommu.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef MSM_IOMMU_H
-#define MSM_IOMMU_H
-
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-
-/* Sharability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NON_SH		0x0
-#define MSM_IOMMU_ATTR_SH		0x4
-
-/* Cacheability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NONCACHED	0x0
-#define MSM_IOMMU_ATTR_CACHED_WB_WA	0x1
-#define MSM_IOMMU_ATTR_CACHED_WB_NWA	0x2
-#define MSM_IOMMU_ATTR_CACHED_WT	0x3
-
-/* Mask for the cache policy attribute */
-#define MSM_IOMMU_CP_MASK		0x03
-
-/* Maximum number of Machine IDs that we are allowing to be mapped to the same
- * context bank. The number of MIDs mapped to the same CB does not affect
- * performance, but there is a practical limit on how many distinct MIDs may
- * be present. These mappings are typically determined at design time and are
- * not expected to change at run time.
- */
-#define MAX_NUM_MIDS	32
-
-/**
- * struct msm_iommu_dev - a single IOMMU hardware instance
- * name		Human-readable name given to this IOMMU HW instance
- * ncb		Number of context banks present on this IOMMU HW instance
- */
-struct msm_iommu_dev {
-	const char *name;
-	int ncb;
-};
-
-/**
- * struct msm_iommu_ctx_dev - an IOMMU context bank instance
- * name		Human-readable name given to this context bank
- * num		Index of this context bank within the hardware
- * mids		List of Machine IDs that are to be mapped into this context
- *		bank, terminated by -1. The MID is a set of signals on the
- *		AXI bus that identifies the function associated with a specific
- *		memory request. (See ARM spec).
- */
-struct msm_iommu_ctx_dev {
-	const char *name;
-	int num;
-	int mids[MAX_NUM_MIDS];
-};
-
-
-/**
- * struct msm_iommu_drvdata - A single IOMMU hardware instance
- * @base:	IOMMU config port base address (VA)
- * @ncb		The number of contexts on this IOMMU
- * @irq:	Interrupt number
- * @clk:	The bus clock for this IOMMU hardware instance
- * @pclk:	The clock for the IOMMU bus interconnect
- *
- * A msm_iommu_drvdata holds the global driver data about a single piece
- * of an IOMMU hardware instance.
- */
-struct msm_iommu_drvdata {
-	void __iomem *base;
-	int irq;
-	int ncb;
-	struct clk *clk;
-	struct clk *pclk;
-};
-
-/**
- * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
- * @num:		Hardware context number of this context
- * @pdev:		Platform device associated wit this HW instance
- * @attached_elm:	List element for domains to track which devices are
- *			attached to them
- *
- * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
- * within each IOMMU hardware instance
- */
-struct msm_iommu_ctx_drvdata {
-	int num;
-	struct platform_device *pdev;
-	struct list_head attached_elm;
-};
-
-/*
- * Look up an IOMMU context device by its context name. NULL if none found.
- * Useful for testing and drivers that do not yet fully have IOMMU stuff in
- * their platform devices.
- */
-struct device *msm_iommu_get_ctx(const char *ctx_name);
-
-/*
- * Interrupt handler for the IOMMU context fault interrupt. Hooking the
- * interrupt is not supported in the API yet, but this will print an error
- * message and dump useful IOMMU registers.
- */
-irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
deleted file mode 100644
index fc160101dead..000000000000
--- a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
+++ /dev/null
@@ -1,1865 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-
-#define CTX_SHIFT 12
-
-#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
-#define GET_CTX_REG(reg, base, ctx) \
-				(readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-#define SET_GLOBAL_REG(reg, base, val)	writel((val), ((base) + (reg)))
-
-#define SET_CTX_REG(reg, base, ctx, val) \
-			writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-/* Wrappers for numbered registers */
-#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
-#define GET_GLOBAL_REG_N(b, n, r)    GET_GLOBAL_REG(b, ((r) + (n << 2)))
-
-/* Field wrappers */
-#define GET_GLOBAL_FIELD(b, r, F)    GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
-#define GET_CONTEXT_FIELD(b, c, r, F)	\
-	GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
-
-#define SET_GLOBAL_FIELD(b, r, F, v) \
-	SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
-#define SET_CONTEXT_FIELD(b, c, r, F, v)	\
-	SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
-
-#define GET_FIELD(addr, mask, shift)  ((readl(addr) >> (shift)) & (mask))
-
-#define SET_FIELD(addr, mask, shift, v) \
-do { \
-	int t = readl(addr); \
-	writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
-} while (0)
-
-
-#define NUM_FL_PTE	4096
-#define NUM_SL_PTE	256
-#define NUM_TEX_CLASS	8
-
-/* First-level page table bits */
-#define FL_BASE_MASK		0xFFFFFC00
-#define FL_TYPE_TABLE		(1 << 0)
-#define FL_TYPE_SECT		(2 << 0)
-#define FL_SUPERSECTION		(1 << 18)
-#define FL_AP_WRITE		(1 << 10)
-#define FL_AP_READ		(1 << 11)
-#define FL_SHARED		(1 << 16)
-#define FL_BUFFERABLE		(1 << 2)
-#define FL_CACHEABLE		(1 << 3)
-#define FL_TEX0			(1 << 12)
-#define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
-#define FL_NG			(1 << 17)
-
-/* Second-level page table bits */
-#define SL_BASE_MASK_LARGE	0xFFFF0000
-#define SL_BASE_MASK_SMALL	0xFFFFF000
-#define SL_TYPE_LARGE		(1 << 0)
-#define SL_TYPE_SMALL		(2 << 0)
-#define SL_AP0			(1 << 4)
-#define SL_AP1			(2 << 4)
-#define SL_SHARED		(1 << 10)
-#define SL_BUFFERABLE		(1 << 2)
-#define SL_CACHEABLE		(1 << 3)
-#define SL_TEX0			(1 << 6)
-#define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
-#define SL_NG			(1 << 11)
-
-/* Memory type and cache policy attributes */
-#define MT_SO			0
-#define MT_DEV			1
-#define MT_NORMAL		2
-#define CP_NONCACHED		0
-#define CP_WB_WA		1
-#define CP_WT			2
-#define CP_WB_NWA		3
-
-/* Global register setters / getters */
-#define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
-#define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
-#define SET_TLBRSW(b, v)	 SET_GLOBAL_REG(TLBRSW, (b), (v))
-#define SET_TLBTR0(b, v)	 SET_GLOBAL_REG(TLBTR0, (b), (v))
-#define SET_TLBTR1(b, v)	 SET_GLOBAL_REG(TLBTR1, (b), (v))
-#define SET_TLBTR2(b, v)	 SET_GLOBAL_REG(TLBTR2, (b), (v))
-#define SET_TESTBUSCR(b, v)	 SET_GLOBAL_REG(TESTBUSCR, (b), (v))
-#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
-#define SET_TLBIVMID(b, v)	 SET_GLOBAL_REG(TLBIVMID, (b), (v))
-#define SET_CR(b, v)		 SET_GLOBAL_REG(CR, (b), (v))
-#define SET_EAR(b, v)		 SET_GLOBAL_REG(EAR, (b), (v))
-#define SET_ESR(b, v)		 SET_GLOBAL_REG(ESR, (b), (v))
-#define SET_ESRRESTORE(b, v)	 SET_GLOBAL_REG(ESRRESTORE, (b), (v))
-#define SET_ESYNR0(b, v)	 SET_GLOBAL_REG(ESYNR0, (b), (v))
-#define SET_ESYNR1(b, v)	 SET_GLOBAL_REG(ESYNR1, (b), (v))
-#define SET_RPU_ACR(b, v)	 SET_GLOBAL_REG(RPU_ACR, (b), (v))
-
-#define GET_M2VCBR_N(b, N)	 GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
-#define GET_CBACR_N(b, N)	 GET_GLOBAL_REG_N(CBACR_N, N, (b))
-#define GET_TLBTR0(b)		 GET_GLOBAL_REG(TLBTR0, (b))
-#define GET_TLBTR1(b)		 GET_GLOBAL_REG(TLBTR1, (b))
-#define GET_TLBTR2(b)		 GET_GLOBAL_REG(TLBTR2, (b))
-#define GET_TESTBUSCR(b)	 GET_GLOBAL_REG(TESTBUSCR, (b))
-#define GET_GLOBAL_TLBIALL(b)	 GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
-#define GET_TLBIVMID(b)		 GET_GLOBAL_REG(TLBIVMID, (b))
-#define GET_CR(b)		 GET_GLOBAL_REG(CR, (b))
-#define GET_EAR(b)		 GET_GLOBAL_REG(EAR, (b))
-#define GET_ESR(b)		 GET_GLOBAL_REG(ESR, (b))
-#define GET_ESRRESTORE(b)	 GET_GLOBAL_REG(ESRRESTORE, (b))
-#define GET_ESYNR0(b)		 GET_GLOBAL_REG(ESYNR0, (b))
-#define GET_ESYNR1(b)		 GET_GLOBAL_REG(ESYNR1, (b))
-#define GET_REV(b)		 GET_GLOBAL_REG(REV, (b))
-#define GET_IDR(b)		 GET_GLOBAL_REG(IDR, (b))
-#define GET_RPU_ACR(b)		 GET_GLOBAL_REG(RPU_ACR, (b))
-
-
-/* Context register setters/getters */
-#define SET_SCTLR(b, c, v)	 SET_CTX_REG(SCTLR, (b), (c), (v))
-#define SET_ACTLR(b, c, v)	 SET_CTX_REG(ACTLR, (b), (c), (v))
-#define SET_CONTEXTIDR(b, c, v)	 SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
-#define SET_TTBR0(b, c, v)	 SET_CTX_REG(TTBR0, (b), (c), (v))
-#define SET_TTBR1(b, c, v)	 SET_CTX_REG(TTBR1, (b), (c), (v))
-#define SET_TTBCR(b, c, v)	 SET_CTX_REG(TTBCR, (b), (c), (v))
-#define SET_PAR(b, c, v)	 SET_CTX_REG(PAR, (b), (c), (v))
-#define SET_FSR(b, c, v)	 SET_CTX_REG(FSR, (b), (c), (v))
-#define SET_FSRRESTORE(b, c, v)	 SET_CTX_REG(FSRRESTORE, (b), (c), (v))
-#define SET_FAR(b, c, v)	 SET_CTX_REG(FAR, (b), (c), (v))
-#define SET_FSYNR0(b, c, v)	 SET_CTX_REG(FSYNR0, (b), (c), (v))
-#define SET_FSYNR1(b, c, v)	 SET_CTX_REG(FSYNR1, (b), (c), (v))
-#define SET_PRRR(b, c, v)	 SET_CTX_REG(PRRR, (b), (c), (v))
-#define SET_NMRR(b, c, v)	 SET_CTX_REG(NMRR, (b), (c), (v))
-#define SET_TLBLKCR(b, c, v)	 SET_CTX_REG(TLBLCKR, (b), (c), (v))
-#define SET_V2PSR(b, c, v)	 SET_CTX_REG(V2PSR, (b), (c), (v))
-#define SET_TLBFLPTER(b, c, v)	 SET_CTX_REG(TLBFLPTER, (b), (c), (v))
-#define SET_TLBSLPTER(b, c, v)	 SET_CTX_REG(TLBSLPTER, (b), (c), (v))
-#define SET_BFBCR(b, c, v)	 SET_CTX_REG(BFBCR, (b), (c), (v))
-#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
-#define SET_TLBIASID(b, c, v)	 SET_CTX_REG(TLBIASID, (b), (c), (v))
-#define SET_TLBIVA(b, c, v)	 SET_CTX_REG(TLBIVA, (b), (c), (v))
-#define SET_TLBIVAA(b, c, v)	 SET_CTX_REG(TLBIVAA, (b), (c), (v))
-#define SET_V2PPR(b, c, v)	 SET_CTX_REG(V2PPR, (b), (c), (v))
-#define SET_V2PPW(b, c, v)	 SET_CTX_REG(V2PPW, (b), (c), (v))
-#define SET_V2PUR(b, c, v)	 SET_CTX_REG(V2PUR, (b), (c), (v))
-#define SET_V2PUW(b, c, v)	 SET_CTX_REG(V2PUW, (b), (c), (v))
-#define SET_RESUME(b, c, v)	 SET_CTX_REG(RESUME, (b), (c), (v))
-
-#define GET_SCTLR(b, c)		 GET_CTX_REG(SCTLR, (b), (c))
-#define GET_ACTLR(b, c)		 GET_CTX_REG(ACTLR, (b), (c))
-#define GET_CONTEXTIDR(b, c)	 GET_CTX_REG(CONTEXTIDR, (b), (c))
-#define GET_TTBR0(b, c)		 GET_CTX_REG(TTBR0, (b), (c))
-#define GET_TTBR1(b, c)		 GET_CTX_REG(TTBR1, (b), (c))
-#define GET_TTBCR(b, c)		 GET_CTX_REG(TTBCR, (b), (c))
-#define GET_PAR(b, c)		 GET_CTX_REG(PAR, (b), (c))
-#define GET_FSR(b, c)		 GET_CTX_REG(FSR, (b), (c))
-#define GET_FSRRESTORE(b, c)	 GET_CTX_REG(FSRRESTORE, (b), (c))
-#define GET_FAR(b, c)		 GET_CTX_REG(FAR, (b), (c))
-#define GET_FSYNR0(b, c)	 GET_CTX_REG(FSYNR0, (b), (c))
-#define GET_FSYNR1(b, c)	 GET_CTX_REG(FSYNR1, (b), (c))
-#define GET_PRRR(b, c)		 GET_CTX_REG(PRRR, (b), (c))
-#define GET_NMRR(b, c)		 GET_CTX_REG(NMRR, (b), (c))
-#define GET_TLBLCKR(b, c)	 GET_CTX_REG(TLBLCKR, (b), (c))
-#define GET_V2PSR(b, c)		 GET_CTX_REG(V2PSR, (b), (c))
-#define GET_TLBFLPTER(b, c)	 GET_CTX_REG(TLBFLPTER, (b), (c))
-#define GET_TLBSLPTER(b, c)	 GET_CTX_REG(TLBSLPTER, (b), (c))
-#define GET_BFBCR(b, c)		 GET_CTX_REG(BFBCR, (b), (c))
-#define GET_CTX_TLBIALL(b, c)	 GET_CTX_REG(CTX_TLBIALL, (b), (c))
-#define GET_TLBIASID(b, c)	 GET_CTX_REG(TLBIASID, (b), (c))
-#define GET_TLBIVA(b, c)	 GET_CTX_REG(TLBIVA, (b), (c))
-#define GET_TLBIVAA(b, c)	 GET_CTX_REG(TLBIVAA, (b), (c))
-#define GET_V2PPR(b, c)		 GET_CTX_REG(V2PPR, (b), (c))
-#define GET_V2PPW(b, c)		 GET_CTX_REG(V2PPW, (b), (c))
-#define GET_V2PUR(b, c)		 GET_CTX_REG(V2PUR, (b), (c))
-#define GET_V2PUW(b, c)		 GET_CTX_REG(V2PUW, (b), (c))
-#define GET_RESUME(b, c)	 GET_CTX_REG(RESUME, (b), (c))
-
-
-/* Global field setters / getters */
-/* Global Field Setters: */
-/* CBACR_N */
-#define SET_RWVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
-#define SET_RWE(b, n, v)      SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
-#define SET_RWGE(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
-#define SET_CBVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
-#define SET_IRPTNDX(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
-
-
-/* M2VCBR_N */
-#define SET_VMID(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
-#define SET_CBNDX(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
-#define SET_BYPASSD(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
-#define SET_BPRCOSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
-#define SET_BPRCISH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
-#define SET_BPRCNSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
-#define SET_BPSHCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
-#define SET_NSCFG(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
-#define SET_BPMTCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
-#define SET_BPMEMTYPE(b, n, v) \
-	SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
-
-
-/* CR */
-#define SET_RPUE(b, v)		 SET_GLOBAL_FIELD(b, CR, RPUE, v)
-#define SET_RPUERE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUERE, v)
-#define SET_RPUEIE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
-#define SET_DCDEE(b, v)		 SET_GLOBAL_FIELD(b, CR, DCDEE, v)
-#define SET_CLIENTPD(b, v)       SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
-#define SET_STALLD(b, v)	 SET_GLOBAL_FIELD(b, CR, STALLD, v)
-#define SET_TLBLKCRWE(b, v)      SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
-#define SET_CR_TLBIALLCFG(b, v)  SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
-#define SET_TLBIVMIDCFG(b, v)    SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
-#define SET_CR_HUME(b, v)        SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
-
-
-/* ESR */
-#define SET_CFG(b, v)		 SET_GLOBAL_FIELD(b, ESR, CFG, v)
-#define SET_BYPASS(b, v)	 SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
-#define SET_ESR_MULTI(b, v)      SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
-
-
-/* ESYNR0 */
-#define SET_ESYNR0_AMID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
-#define SET_ESYNR0_APID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
-#define SET_ESYNR0_ABID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
-#define SET_ESYNR0_AVMID(b, v)   SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
-#define SET_ESYNR0_ATID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
-
-
-/* ESYNR1 */
-#define SET_ESYNR1_AMEMTYPE(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
-#define SET_ESYNR1_ASHARED(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
-#define SET_ESYNR1_AINNERSHARED(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
-#define SET_ESYNR1_APRIV(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
-#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
-#define SET_ESYNR1_AINST(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
-#define SET_ESYNR1_AWRITE(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
-#define SET_ESYNR1_ABURST(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
-#define SET_ESYNR1_ALEN(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
-#define SET_ESYNR1_ASIZE(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
-#define SET_ESYNR1_ALOCK(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
-#define SET_ESYNR1_AOOO(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
-#define SET_ESYNR1_AFULL(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
-#define SET_ESYNR1_AC(b, v)      SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
-#define SET_ESYNR1_DCD(b, v)     SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
-
-
-/* TESTBUSCR */
-#define SET_TBE(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
-#define SET_SPDMBE(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
-#define SET_WGSEL(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
-#define SET_TBLSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
-#define SET_TBHSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
-#define SET_SPDM0SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
-#define SET_SPDM1SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
-#define SET_SPDM2SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
-#define SET_SPDM3SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
-
-
-/* TLBIVMID */
-#define SET_TLBIVMID_VMID(b, v)  SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
-
-
-/* TLBRSW */
-#define SET_TLBRSW_INDEX(b, v)   SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
-#define SET_TLBBFBS(b, v)	 SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
-
-
-/* TLBTR0 */
-#define SET_PR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
-#define SET_PW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
-#define SET_UR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
-#define SET_UW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
-#define SET_XN(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
-#define SET_NSDESC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
-#define SET_ISH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
-#define SET_SH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
-#define SET_MT(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
-#define SET_DPSIZR(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
-#define SET_DPSIZC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
-
-
-/* TLBTR1 */
-#define SET_TLBTR1_VMID(b, v)    SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
-#define SET_TLBTR1_PA(b, v)      SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
-
-
-/* TLBTR2 */
-#define SET_TLBTR2_ASID(b, v)    SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
-#define SET_TLBTR2_V(b, v)       SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
-#define SET_TLBTR2_NSTID(b, v)   SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
-#define SET_TLBTR2_NV(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
-#define SET_TLBTR2_VA(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
-
-
-/* Global Field Getters */
-/* CBACR_N */
-#define GET_RWVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
-#define GET_RWE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
-#define GET_RWGE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
-#define GET_CBVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
-#define GET_IRPTNDX(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
-
-
-/* M2VCBR_N */
-#define GET_VMID(b, n)       GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
-#define GET_CBNDX(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
-#define GET_BYPASSD(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
-#define GET_BPRCOSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
-#define GET_BPRCISH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
-#define GET_BPRCNSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
-#define GET_BPSHCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
-#define GET_NSCFG(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
-#define GET_BPMTCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
-#define GET_BPMEMTYPE(b, n)  GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
-
-
-/* CR */
-#define GET_RPUE(b)		 GET_GLOBAL_FIELD(b, CR, RPUE)
-#define GET_RPUERE(b)		 GET_GLOBAL_FIELD(b, CR, RPUERE)
-#define GET_RPUEIE(b)		 GET_GLOBAL_FIELD(b, CR, RPUEIE)
-#define GET_DCDEE(b)		 GET_GLOBAL_FIELD(b, CR, DCDEE)
-#define GET_CLIENTPD(b)		 GET_GLOBAL_FIELD(b, CR, CLIENTPD)
-#define GET_STALLD(b)		 GET_GLOBAL_FIELD(b, CR, STALLD)
-#define GET_TLBLKCRWE(b)	 GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
-#define GET_CR_TLBIALLCFG(b)	 GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
-#define GET_TLBIVMIDCFG(b)	 GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
-#define GET_CR_HUME(b)		 GET_GLOBAL_FIELD(b, CR, CR_HUME)
-
-
-/* ESR */
-#define GET_CFG(b)		 GET_GLOBAL_FIELD(b, ESR, CFG)
-#define GET_BYPASS(b)		 GET_GLOBAL_FIELD(b, ESR, BYPASS)
-#define GET_ESR_MULTI(b)	 GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
-
-
-/* ESYNR0 */
-#define GET_ESYNR0_AMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
-#define GET_ESYNR0_APID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
-#define GET_ESYNR0_ABID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
-#define GET_ESYNR0_AVMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
-#define GET_ESYNR0_ATID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
-
-
-/* ESYNR1 */
-#define GET_ESYNR1_AMEMTYPE(b)   GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
-#define GET_ESYNR1_ASHARED(b)    GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
-#define GET_ESYNR1_AINNERSHARED(b) \
-			GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
-#define GET_ESYNR1_APRIV(b)      GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
-#define GET_ESYNR1_APROTNS(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
-#define GET_ESYNR1_AINST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
-#define GET_ESYNR1_AWRITE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
-#define GET_ESYNR1_ABURST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
-#define GET_ESYNR1_ALEN(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
-#define GET_ESYNR1_ASIZE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
-#define GET_ESYNR1_ALOCK(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
-#define GET_ESYNR1_AOOO(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
-#define GET_ESYNR1_AFULL(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
-#define GET_ESYNR1_AC(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
-#define GET_ESYNR1_DCD(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
-
-
-/* IDR */
-#define GET_NM2VCBMT(b)		 GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
-#define GET_HTW(b)		 GET_GLOBAL_FIELD(b, IDR, HTW)
-#define GET_HUM(b)		 GET_GLOBAL_FIELD(b, IDR, HUM)
-#define GET_TLBSIZE(b)		 GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
-#define GET_NCB(b)		 GET_GLOBAL_FIELD(b, IDR, NCB)
-#define GET_NIRPT(b)		 GET_GLOBAL_FIELD(b, IDR, NIRPT)
-
-
-/* REV */
-#define GET_MAJOR(b)		 GET_GLOBAL_FIELD(b, REV, MAJOR)
-#define GET_MINOR(b)		 GET_GLOBAL_FIELD(b, REV, MINOR)
-
-
-/* TESTBUSCR */
-#define GET_TBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
-#define GET_SPDMBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
-#define GET_WGSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
-#define GET_TBLSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
-#define GET_TBHSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
-#define GET_SPDM0SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
-#define GET_SPDM1SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
-#define GET_SPDM2SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
-#define GET_SPDM3SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
-
-
-/* TLBIVMID */
-#define GET_TLBIVMID_VMID(b)	 GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
-
-
-/* TLBTR0 */
-#define GET_PR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PR)
-#define GET_PW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PW)
-#define GET_UR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UR)
-#define GET_UW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UW)
-#define GET_XN(b)		 GET_GLOBAL_FIELD(b, TLBTR0, XN)
-#define GET_NSDESC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
-#define GET_ISH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, ISH)
-#define GET_SH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, SH)
-#define GET_MT(b)		 GET_GLOBAL_FIELD(b, TLBTR0, MT)
-#define GET_DPSIZR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
-#define GET_DPSIZC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
-
-
-/* TLBTR1 */
-#define GET_TLBTR1_VMID(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
-#define GET_TLBTR1_PA(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
-
-
-/* TLBTR2 */
-#define GET_TLBTR2_ASID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
-#define GET_TLBTR2_V(b)		 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
-#define GET_TLBTR2_NSTID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
-#define GET_TLBTR2_NV(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
-#define GET_TLBTR2_VA(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
-
-
-/* Context Register setters / getters */
-/* Context Register setters */
-/* ACTLR */
-#define SET_CFERE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
-#define SET_CFEIE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
-#define SET_PTSHCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
-#define SET_RCOSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
-#define SET_RCISH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
-#define SET_RCNSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
-#define SET_PRIVCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
-#define SET_DNA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
-#define SET_DNLV2PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
-#define SET_TLBMCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
-#define SET_CFCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
-#define SET_TIPCF(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
-#define SET_V2PCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
-#define SET_HUME(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
-#define SET_PTMTCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
-#define SET_PTMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
-
-
-/* BFBCR */
-#define SET_BFBDFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
-#define SET_BFBSFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
-#define SET_SFVS(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
-#define SET_FLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
-#define SET_SLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
-
-
-/* CONTEXTIDR */
-#define SET_CONTEXTIDR_ASID(b, c, v)   \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
-#define SET_CONTEXTIDR_PROCID(b, c, v) \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
-
-
-/* FSR */
-#define SET_TF(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, TF, v)
-#define SET_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
-#define SET_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, APF, v)
-#define SET_TLBMF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
-#define SET_HTWDEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
-#define SET_HTWSEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
-#define SET_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
-#define SET_SL(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SL, v)
-#define SET_SS(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SS, v)
-#define SET_MULTI(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
-
-
-/* FSYNR0 */
-#define SET_AMID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
-#define SET_APID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
-#define SET_ABID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
-#define SET_ATID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
-
-
-/* FSYNR1 */
-#define SET_AMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
-#define SET_ASHARED(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
-#define SET_AINNERSHARED(b, c, v)  \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
-#define SET_APRIV(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
-#define SET_APROTNS(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
-#define SET_AINST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
-#define SET_AWRITE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
-#define SET_ABURST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
-#define SET_ALEN(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
-#define SET_FSYNR1_ASIZE(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
-#define SET_ALOCK(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
-#define SET_AFULL(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
-
-
-/* NMRR */
-#define SET_ICPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
-#define SET_ICPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
-#define SET_ICPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
-#define SET_ICPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
-#define SET_ICPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
-#define SET_ICPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
-#define SET_ICPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
-#define SET_ICPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
-#define SET_OCPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
-#define SET_OCPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
-#define SET_OCPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
-#define SET_OCPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
-#define SET_OCPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
-#define SET_OCPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
-#define SET_OCPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
-#define SET_OCPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
-
-
-/* PAR */
-#define SET_FAULT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
-
-#define SET_FAULT_TF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
-#define SET_FAULT_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
-#define SET_FAULT_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
-#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
-#define SET_FAULT_HTWDEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
-#define SET_FAULT_HTWSEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
-#define SET_FAULT_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
-#define SET_FAULT_SL(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
-#define SET_FAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
-
-#define SET_NOFAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
-#define SET_NOFAULT_MT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
-#define SET_NOFAULT_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
-#define SET_NOFAULT_NS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
-#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
-#define SET_NPFAULT_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
-
-
-/* PRRR */
-#define SET_MTC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
-#define SET_MTC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
-#define SET_MTC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
-#define SET_MTC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
-#define SET_MTC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
-#define SET_MTC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
-#define SET_MTC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
-#define SET_MTC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
-#define SET_SHDSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
-#define SET_SHDSH1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
-#define SET_SHNMSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
-#define SET_SHNMSH1(b, c, v)     SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
-#define SET_NOS0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
-#define SET_NOS1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
-#define SET_NOS2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
-#define SET_NOS3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
-#define SET_NOS4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
-#define SET_NOS5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
-#define SET_NOS6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
-#define SET_NOS7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
-
-
-/* RESUME */
-#define SET_TNR(b, c, v)	 SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
-
-
-/* SCTLR */
-#define SET_M(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
-#define SET_TRE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
-#define SET_AFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
-#define SET_HAF(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
-#define SET_BE(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
-#define SET_AFFD(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
-
-
-/* TLBLKCR */
-#define SET_LKE(b, c, v)	   SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
-#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
-#define SET_TLBIASIDCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
-#define SET_TLBIVAACFG(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
-#define SET_FLOOR(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
-#define SET_VICTIM(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
-
-
-/* TTBCR */
-#define SET_N(b, c, v)	         SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
-#define SET_PD0(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
-#define SET_PD1(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
-
-
-/* TTBR0 */
-#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
-#define SET_TTBR0_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
-#define SET_TTBR0_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
-#define SET_TTBR0_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
-#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
-#define SET_TTBR0_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
-
-
-/* TTBR1 */
-#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
-#define SET_TTBR1_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
-#define SET_TTBR1_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
-#define SET_TTBR1_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
-#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
-#define SET_TTBR1_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
-
-
-/* V2PSR */
-#define SET_HIT(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
-#define SET_INDEX(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
-
-
-/* Context Register getters */
-/* ACTLR */
-#define GET_CFERE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
-#define GET_CFEIE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
-#define GET_PTSHCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
-#define GET_RCOSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
-#define GET_RCISH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
-#define GET_RCNSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
-#define GET_PRIVCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
-#define GET_DNA(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
-#define GET_DNLV2PA(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
-#define GET_TLBMCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
-#define GET_CFCFG(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
-#define GET_TIPCF(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
-#define GET_V2PCFG(b, c)        GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
-#define GET_HUME(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
-#define GET_PTMTCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
-#define GET_PTMEMTYPE(b, c)     GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
-
-/* BFBCR */
-#define GET_BFBDFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
-#define GET_BFBSFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
-#define GET_SFVS(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
-#define GET_FLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
-#define GET_SLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
-
-
-/* CONTEXTIDR */
-#define GET_CONTEXTIDR_ASID(b, c) \
-			GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
-#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
-
-
-/* FSR */
-#define GET_TF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TF)
-#define GET_AFF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, AFF)
-#define GET_APF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, APF)
-#define GET_TLBMF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
-#define GET_HTWDEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
-#define GET_HTWSEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
-#define GET_MHF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MHF)
-#define GET_SL(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SL)
-#define GET_SS(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SS)
-#define GET_MULTI(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MULTI)
-
-
-/* FSYNR0 */
-#define GET_AMID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
-#define GET_APID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
-#define GET_ABID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
-#define GET_ATID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
-
-
-/* FSYNR1 */
-#define GET_AMEMTYPE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
-#define GET_ASHARED(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
-#define GET_AINNERSHARED(b, c)  GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
-#define GET_APRIV(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
-#define GET_APROTNS(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
-#define GET_AINST(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
-#define GET_AWRITE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
-#define GET_ABURST(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
-#define GET_ALEN(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
-#define GET_FSYNR1_ASIZE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
-#define GET_ALOCK(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
-#define GET_AFULL(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
-
-
-/* NMRR */
-#define GET_ICPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
-#define GET_ICPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
-#define GET_ICPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
-#define GET_ICPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
-#define GET_ICPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
-#define GET_ICPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
-#define GET_ICPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
-#define GET_ICPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
-#define GET_OCPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
-#define GET_OCPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
-#define GET_OCPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
-#define GET_OCPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
-#define GET_OCPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
-#define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
-#define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
-#define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
-#define NMRR_ICP(nmrr, n)	(((nmrr) & (3 << ((n) * 2))) >> ((n) * 2))
-#define NMRR_OCP(nmrr, n)	(((nmrr) & (3 << ((n) * 2 + 16))) >> \
-								((n) * 2 + 16))
-
-/* PAR */
-#define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
-
-#define GET_FAULT_TF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
-#define GET_FAULT_AFF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
-#define GET_FAULT_APF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
-#define GET_FAULT_TLBMF(b, c)   GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
-#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
-#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
-#define GET_FAULT_MHF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
-#define GET_FAULT_SL(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
-#define GET_FAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
-
-#define GET_NOFAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
-#define GET_NOFAULT_MT(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
-#define GET_NOFAULT_SH(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
-#define GET_NOFAULT_NS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
-#define GET_NOFAULT_NOS(b, c)   GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
-#define GET_NPFAULT_PA(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
-
-
-/* PRRR */
-#define GET_MTC0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
-#define GET_MTC1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
-#define GET_MTC2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
-#define GET_MTC3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
-#define GET_MTC4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
-#define GET_MTC5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
-#define GET_MTC6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
-#define GET_MTC7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
-#define GET_SHDSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
-#define GET_SHDSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
-#define GET_SHNMSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
-#define GET_SHNMSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
-#define GET_NOS0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
-#define GET_NOS1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
-#define GET_NOS2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
-#define GET_NOS3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
-#define GET_NOS4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
-#define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
-#define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
-#define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
-#define PRRR_NOS(prrr, n)	 ((prrr) & (1 << ((n) + 24)) ? 1 : 0)
-#define PRRR_MT(prrr, n)	 ((((prrr) & (3 << ((n) * 2))) >> ((n) * 2)))
-
-
-/* RESUME */
-#define GET_TNR(b, c)		GET_CONTEXT_FIELD(b, c, RESUME, TNR)
-
-
-/* SCTLR */
-#define GET_M(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, M)
-#define GET_TRE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
-#define GET_AFE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
-#define GET_HAF(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
-#define GET_BE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, BE)
-#define GET_AFFD(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
-
-
-/* TLBLKCR */
-#define GET_LKE(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
-#define GET_TLBLCKR_TLBIALLCFG(b, c) \
-			GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
-#define GET_TLBIASIDCFG(b, c)   GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
-#define GET_TLBIVAACFG(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
-#define GET_FLOOR(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
-#define GET_VICTIM(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
-
-
-/* TTBCR */
-#define GET_N(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, N)
-#define GET_PD0(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
-#define GET_PD1(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
-
-
-/* TTBR0 */
-#define GET_TTBR0_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
-#define GET_TTBR0_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
-#define GET_TTBR0_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
-#define GET_TTBR0_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
-#define GET_TTBR0_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
-#define GET_TTBR0_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
-
-
-/* TTBR1 */
-#define GET_TTBR1_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
-#define GET_TTBR1_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
-#define GET_TTBR1_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
-#define GET_TTBR1_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
-#define GET_TTBR1_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
-#define GET_TTBR1_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
-
-
-/* V2PSR */
-#define GET_HIT(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
-#define GET_INDEX(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
-
-
-/* Global Registers */
-#define M2VCBR_N	(0xFF000)
-#define CBACR_N		(0xFF800)
-#define TLBRSW		(0xFFE00)
-#define TLBTR0		(0xFFE80)
-#define TLBTR1		(0xFFE84)
-#define TLBTR2		(0xFFE88)
-#define TESTBUSCR	(0xFFE8C)
-#define GLOBAL_TLBIALL	(0xFFF00)
-#define TLBIVMID	(0xFFF04)
-#define CR		(0xFFF80)
-#define EAR		(0xFFF84)
-#define ESR		(0xFFF88)
-#define ESRRESTORE	(0xFFF8C)
-#define ESYNR0		(0xFFF90)
-#define ESYNR1		(0xFFF94)
-#define REV		(0xFFFF4)
-#define IDR		(0xFFFF8)
-#define RPU_ACR		(0xFFFFC)
-
-
-/* Context Bank Registers */
-#define SCTLR		(0x000)
-#define ACTLR		(0x004)
-#define CONTEXTIDR	(0x008)
-#define TTBR0		(0x010)
-#define TTBR1		(0x014)
-#define TTBCR		(0x018)
-#define PAR		(0x01C)
-#define FSR		(0x020)
-#define FSRRESTORE	(0x024)
-#define FAR		(0x028)
-#define FSYNR0		(0x02C)
-#define FSYNR1		(0x030)
-#define PRRR		(0x034)
-#define NMRR		(0x038)
-#define TLBLCKR		(0x03C)
-#define V2PSR		(0x040)
-#define TLBFLPTER	(0x044)
-#define TLBSLPTER	(0x048)
-#define BFBCR		(0x04C)
-#define CTX_TLBIALL	(0x800)
-#define TLBIASID	(0x804)
-#define TLBIVA		(0x808)
-#define TLBIVAA		(0x80C)
-#define V2PPR		(0x810)
-#define V2PPW		(0x814)
-#define V2PUR		(0x818)
-#define V2PUW		(0x81C)
-#define RESUME		(0x820)
-
-
-/* Global Register Fields */
-/* CBACRn */
-#define RWVMID        (RWVMID_MASK       << RWVMID_SHIFT)
-#define RWE           (RWE_MASK          << RWE_SHIFT)
-#define RWGE          (RWGE_MASK         << RWGE_SHIFT)
-#define CBVMID        (CBVMID_MASK       << CBVMID_SHIFT)
-#define IRPTNDX       (IRPTNDX_MASK      << IRPTNDX_SHIFT)
-
-
-/* CR */
-#define RPUE          (RPUE_MASK          << RPUE_SHIFT)
-#define RPUERE        (RPUERE_MASK        << RPUERE_SHIFT)
-#define RPUEIE        (RPUEIE_MASK        << RPUEIE_SHIFT)
-#define DCDEE         (DCDEE_MASK         << DCDEE_SHIFT)
-#define CLIENTPD      (CLIENTPD_MASK      << CLIENTPD_SHIFT)
-#define STALLD        (STALLD_MASK        << STALLD_SHIFT)
-#define TLBLKCRWE     (TLBLKCRWE_MASK     << TLBLKCRWE_SHIFT)
-#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
-#define TLBIVMIDCFG   (TLBIVMIDCFG_MASK   << TLBIVMIDCFG_SHIFT)
-#define CR_HUME       (CR_HUME_MASK       << CR_HUME_SHIFT)
-
-
-/* ESR */
-#define CFG           (CFG_MASK          << CFG_SHIFT)
-#define BYPASS        (BYPASS_MASK       << BYPASS_SHIFT)
-#define ESR_MULTI     (ESR_MULTI_MASK    << ESR_MULTI_SHIFT)
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID   (ESYNR0_AMID_MASK  << ESYNR0_AMID_SHIFT)
-#define ESYNR0_APID   (ESYNR0_APID_MASK  << ESYNR0_APID_SHIFT)
-#define ESYNR0_ABID   (ESYNR0_ABID_MASK  << ESYNR0_ABID_SHIFT)
-#define ESYNR0_AVMID  (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
-#define ESYNR0_ATID   (ESYNR0_ATID_MASK  << ESYNR0_ATID_SHIFT)
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE      (ESYNR1_AMEMTYPE_MASK    << ESYNR1_AMEMTYPE_SHIFT)
-#define ESYNR1_ASHARED       (ESYNR1_ASHARED_MASK     << ESYNR1_ASHARED_SHIFT)
-#define ESYNR1_AINNERSHARED  (ESYNR1_AINNERSHARED_MASK<< \
-						ESYNR1_AINNERSHARED_SHIFT)
-#define ESYNR1_APRIV         (ESYNR1_APRIV_MASK       << ESYNR1_APRIV_SHIFT)
-#define ESYNR1_APROTNS       (ESYNR1_APROTNS_MASK     << ESYNR1_APROTNS_SHIFT)
-#define ESYNR1_AINST         (ESYNR1_AINST_MASK       << ESYNR1_AINST_SHIFT)
-#define ESYNR1_AWRITE        (ESYNR1_AWRITE_MASK      << ESYNR1_AWRITE_SHIFT)
-#define ESYNR1_ABURST        (ESYNR1_ABURST_MASK      << ESYNR1_ABURST_SHIFT)
-#define ESYNR1_ALEN          (ESYNR1_ALEN_MASK        << ESYNR1_ALEN_SHIFT)
-#define ESYNR1_ASIZE         (ESYNR1_ASIZE_MASK       << ESYNR1_ASIZE_SHIFT)
-#define ESYNR1_ALOCK         (ESYNR1_ALOCK_MASK       << ESYNR1_ALOCK_SHIFT)
-#define ESYNR1_AOOO          (ESYNR1_AOOO_MASK        << ESYNR1_AOOO_SHIFT)
-#define ESYNR1_AFULL         (ESYNR1_AFULL_MASK       << ESYNR1_AFULL_SHIFT)
-#define ESYNR1_AC            (ESYNR1_AC_MASK          << ESYNR1_AC_SHIFT)
-#define ESYNR1_DCD           (ESYNR1_DCD_MASK         << ESYNR1_DCD_SHIFT)
-
-
-/* IDR */
-#define NM2VCBMT      (NM2VCBMT_MASK     << NM2VCBMT_SHIFT)
-#define HTW           (HTW_MASK          << HTW_SHIFT)
-#define HUM           (HUM_MASK          << HUM_SHIFT)
-#define TLBSIZE       (TLBSIZE_MASK      << TLBSIZE_SHIFT)
-#define NCB           (NCB_MASK          << NCB_SHIFT)
-#define NIRPT         (NIRPT_MASK        << NIRPT_SHIFT)
-
-
-/* M2VCBRn */
-#define VMID          (VMID_MASK         << VMID_SHIFT)
-#define CBNDX         (CBNDX_MASK        << CBNDX_SHIFT)
-#define BYPASSD       (BYPASSD_MASK      << BYPASSD_SHIFT)
-#define BPRCOSH       (BPRCOSH_MASK      << BPRCOSH_SHIFT)
-#define BPRCISH       (BPRCISH_MASK      << BPRCISH_SHIFT)
-#define BPRCNSH       (BPRCNSH_MASK      << BPRCNSH_SHIFT)
-#define BPSHCFG       (BPSHCFG_MASK      << BPSHCFG_SHIFT)
-#define NSCFG         (NSCFG_MASK        << NSCFG_SHIFT)
-#define BPMTCFG       (BPMTCFG_MASK      << BPMTCFG_SHIFT)
-#define BPMEMTYPE     (BPMEMTYPE_MASK    << BPMEMTYPE_SHIFT)
-
-
-/* REV */
-#define IDR_MINOR     (MINOR_MASK        << MINOR_SHIFT)
-#define IDR_MAJOR     (MAJOR_MASK        << MAJOR_SHIFT)
-
-
-/* TESTBUSCR */
-#define TBE           (TBE_MASK          << TBE_SHIFT)
-#define SPDMBE        (SPDMBE_MASK       << SPDMBE_SHIFT)
-#define WGSEL         (WGSEL_MASK        << WGSEL_SHIFT)
-#define TBLSEL        (TBLSEL_MASK       << TBLSEL_SHIFT)
-#define TBHSEL        (TBHSEL_MASK       << TBHSEL_SHIFT)
-#define SPDM0SEL      (SPDM0SEL_MASK     << SPDM0SEL_SHIFT)
-#define SPDM1SEL      (SPDM1SEL_MASK     << SPDM1SEL_SHIFT)
-#define SPDM2SEL      (SPDM2SEL_MASK     << SPDM2SEL_SHIFT)
-#define SPDM3SEL      (SPDM3SEL_MASK     << SPDM3SEL_SHIFT)
-
-
-/* TLBIVMID */
-#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX  (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
-#define TLBBFBS       (TLBBFBS_MASK      << TLBBFBS_SHIFT)
-
-
-/* TLBTR0 */
-#define PR            (PR_MASK           << PR_SHIFT)
-#define PW            (PW_MASK           << PW_SHIFT)
-#define UR            (UR_MASK           << UR_SHIFT)
-#define UW            (UW_MASK           << UW_SHIFT)
-#define XN            (XN_MASK           << XN_SHIFT)
-#define NSDESC        (NSDESC_MASK       << NSDESC_SHIFT)
-#define ISH           (ISH_MASK          << ISH_SHIFT)
-#define SH            (SH_MASK           << SH_SHIFT)
-#define MT            (MT_MASK           << MT_SHIFT)
-#define DPSIZR        (DPSIZR_MASK       << DPSIZR_SHIFT)
-#define DPSIZC        (DPSIZC_MASK       << DPSIZC_SHIFT)
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID   (TLBTR1_VMID_MASK  << TLBTR1_VMID_SHIFT)
-#define TLBTR1_PA     (TLBTR1_PA_MASK    << TLBTR1_PA_SHIFT)
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID   (TLBTR2_ASID_MASK  << TLBTR2_ASID_SHIFT)
-#define TLBTR2_V      (TLBTR2_V_MASK     << TLBTR2_V_SHIFT)
-#define TLBTR2_NSTID  (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
-#define TLBTR2_NV     (TLBTR2_NV_MASK    << TLBTR2_NV_SHIFT)
-#define TLBTR2_VA     (TLBTR2_VA_MASK    << TLBTR2_VA_SHIFT)
-
-
-/* Context Register Fields */
-/* ACTLR */
-#define CFERE              (CFERE_MASK              << CFERE_SHIFT)
-#define CFEIE              (CFEIE_MASK              << CFEIE_SHIFT)
-#define PTSHCFG            (PTSHCFG_MASK            << PTSHCFG_SHIFT)
-#define RCOSH              (RCOSH_MASK              << RCOSH_SHIFT)
-#define RCISH              (RCISH_MASK              << RCISH_SHIFT)
-#define RCNSH              (RCNSH_MASK              << RCNSH_SHIFT)
-#define PRIVCFG            (PRIVCFG_MASK            << PRIVCFG_SHIFT)
-#define DNA                (DNA_MASK                << DNA_SHIFT)
-#define DNLV2PA            (DNLV2PA_MASK            << DNLV2PA_SHIFT)
-#define TLBMCFG            (TLBMCFG_MASK            << TLBMCFG_SHIFT)
-#define CFCFG              (CFCFG_MASK              << CFCFG_SHIFT)
-#define TIPCF              (TIPCF_MASK              << TIPCF_SHIFT)
-#define V2PCFG             (V2PCFG_MASK             << V2PCFG_SHIFT)
-#define HUME               (HUME_MASK               << HUME_SHIFT)
-#define PTMTCFG            (PTMTCFG_MASK            << PTMTCFG_SHIFT)
-#define PTMEMTYPE          (PTMEMTYPE_MASK          << PTMEMTYPE_SHIFT)
-
-
-/* BFBCR */
-#define BFBDFE             (BFBDFE_MASK             << BFBDFE_SHIFT)
-#define BFBSFE             (BFBSFE_MASK             << BFBSFE_SHIFT)
-#define SFVS               (SFVS_MASK               << SFVS_SHIFT)
-#define FLVIC              (FLVIC_MASK              << FLVIC_SHIFT)
-#define SLVIC              (SLVIC_MASK              << SLVIC_SHIFT)
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID    (CONTEXTIDR_ASID_MASK    << CONTEXTIDR_ASID_SHIFT)
-#define PROCID             (PROCID_MASK             << PROCID_SHIFT)
-
-
-/* FSR */
-#define TF                 (TF_MASK                 << TF_SHIFT)
-#define AFF                (AFF_MASK                << AFF_SHIFT)
-#define APF                (APF_MASK                << APF_SHIFT)
-#define TLBMF              (TLBMF_MASK              << TLBMF_SHIFT)
-#define HTWDEEF            (HTWDEEF_MASK            << HTWDEEF_SHIFT)
-#define HTWSEEF            (HTWSEEF_MASK            << HTWSEEF_SHIFT)
-#define MHF                (MHF_MASK                << MHF_SHIFT)
-#define SL                 (SL_MASK                 << SL_SHIFT)
-#define SS                 (SS_MASK                 << SS_SHIFT)
-#define MULTI              (MULTI_MASK              << MULTI_SHIFT)
-
-
-/* FSYNR0 */
-#define AMID               (AMID_MASK               << AMID_SHIFT)
-#define APID               (APID_MASK               << APID_SHIFT)
-#define ABID               (ABID_MASK               << ABID_SHIFT)
-#define ATID               (ATID_MASK               << ATID_SHIFT)
-
-
-/* FSYNR1 */
-#define AMEMTYPE           (AMEMTYPE_MASK           << AMEMTYPE_SHIFT)
-#define ASHARED            (ASHARED_MASK            << ASHARED_SHIFT)
-#define AINNERSHARED       (AINNERSHARED_MASK       << AINNERSHARED_SHIFT)
-#define APRIV              (APRIV_MASK              << APRIV_SHIFT)
-#define APROTNS            (APROTNS_MASK            << APROTNS_SHIFT)
-#define AINST              (AINST_MASK              << AINST_SHIFT)
-#define AWRITE             (AWRITE_MASK             << AWRITE_SHIFT)
-#define ABURST             (ABURST_MASK             << ABURST_SHIFT)
-#define ALEN               (ALEN_MASK               << ALEN_SHIFT)
-#define FSYNR1_ASIZE       (FSYNR1_ASIZE_MASK       << FSYNR1_ASIZE_SHIFT)
-#define ALOCK              (ALOCK_MASK              << ALOCK_SHIFT)
-#define AFULL              (AFULL_MASK              << AFULL_SHIFT)
-
-
-/* NMRR */
-#define ICPC0              (ICPC0_MASK              << ICPC0_SHIFT)
-#define ICPC1              (ICPC1_MASK              << ICPC1_SHIFT)
-#define ICPC2              (ICPC2_MASK              << ICPC2_SHIFT)
-#define ICPC3              (ICPC3_MASK              << ICPC3_SHIFT)
-#define ICPC4              (ICPC4_MASK              << ICPC4_SHIFT)
-#define ICPC5              (ICPC5_MASK              << ICPC5_SHIFT)
-#define ICPC6              (ICPC6_MASK              << ICPC6_SHIFT)
-#define ICPC7              (ICPC7_MASK              << ICPC7_SHIFT)
-#define OCPC0              (OCPC0_MASK              << OCPC0_SHIFT)
-#define OCPC1              (OCPC1_MASK              << OCPC1_SHIFT)
-#define OCPC2              (OCPC2_MASK              << OCPC2_SHIFT)
-#define OCPC3              (OCPC3_MASK              << OCPC3_SHIFT)
-#define OCPC4              (OCPC4_MASK              << OCPC4_SHIFT)
-#define OCPC5              (OCPC5_MASK              << OCPC5_SHIFT)
-#define OCPC6              (OCPC6_MASK              << OCPC6_SHIFT)
-#define OCPC7              (OCPC7_MASK              << OCPC7_SHIFT)
-
-
-/* PAR */
-#define FAULT              (FAULT_MASK              << FAULT_SHIFT)
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF           (FAULT_TF_MASK           << FAULT_TF_SHIFT)
-#define FAULT_AFF          (FAULT_AFF_MASK          << FAULT_AFF_SHIFT)
-#define FAULT_APF          (FAULT_APF_MASK          << FAULT_APF_SHIFT)
-#define FAULT_TLBMF        (FAULT_TLBMF_MASK        << FAULT_TLBMF_SHIFT)
-#define FAULT_HTWDEEF      (FAULT_HTWDEEF_MASK      << FAULT_HTWDEEF_SHIFT)
-#define FAULT_HTWSEEF      (FAULT_HTWSEEF_MASK      << FAULT_HTWSEEF_SHIFT)
-#define FAULT_MHF          (FAULT_MHF_MASK          << FAULT_MHF_SHIFT)
-#define FAULT_SL           (FAULT_SL_MASK           << FAULT_SL_SHIFT)
-#define FAULT_SS           (FAULT_SS_MASK           << FAULT_SS_SHIFT)
-
-/* If NO fault is present, the following fields are in effect */
-/* (FAULT remains as before) */
-#define PAR_NOFAULT_SS     (PAR_NOFAULT_SS_MASK     << PAR_NOFAULT_SS_SHIFT)
-#define PAR_NOFAULT_MT     (PAR_NOFAULT_MT_MASK     << PAR_NOFAULT_MT_SHIFT)
-#define PAR_NOFAULT_SH     (PAR_NOFAULT_SH_MASK     << PAR_NOFAULT_SH_SHIFT)
-#define PAR_NOFAULT_NS     (PAR_NOFAULT_NS_MASK     << PAR_NOFAULT_NS_SHIFT)
-#define PAR_NOFAULT_NOS    (PAR_NOFAULT_NOS_MASK    << PAR_NOFAULT_NOS_SHIFT)
-#define PAR_NPFAULT_PA     (PAR_NPFAULT_PA_MASK     << PAR_NPFAULT_PA_SHIFT)
-
-
-/* PRRR */
-#define MTC0               (MTC0_MASK               << MTC0_SHIFT)
-#define MTC1               (MTC1_MASK               << MTC1_SHIFT)
-#define MTC2               (MTC2_MASK               << MTC2_SHIFT)
-#define MTC3               (MTC3_MASK               << MTC3_SHIFT)
-#define MTC4               (MTC4_MASK               << MTC4_SHIFT)
-#define MTC5               (MTC5_MASK               << MTC5_SHIFT)
-#define MTC6               (MTC6_MASK               << MTC6_SHIFT)
-#define MTC7               (MTC7_MASK               << MTC7_SHIFT)
-#define SHDSH0             (SHDSH0_MASK             << SHDSH0_SHIFT)
-#define SHDSH1             (SHDSH1_MASK             << SHDSH1_SHIFT)
-#define SHNMSH0            (SHNMSH0_MASK            << SHNMSH0_SHIFT)
-#define SHNMSH1            (SHNMSH1_MASK            << SHNMSH1_SHIFT)
-#define NOS0               (NOS0_MASK               << NOS0_SHIFT)
-#define NOS1               (NOS1_MASK               << NOS1_SHIFT)
-#define NOS2               (NOS2_MASK               << NOS2_SHIFT)
-#define NOS3               (NOS3_MASK               << NOS3_SHIFT)
-#define NOS4               (NOS4_MASK               << NOS4_SHIFT)
-#define NOS5               (NOS5_MASK               << NOS5_SHIFT)
-#define NOS6               (NOS6_MASK               << NOS6_SHIFT)
-#define NOS7               (NOS7_MASK               << NOS7_SHIFT)
-
-
-/* RESUME */
-#define TNR                (TNR_MASK                << TNR_SHIFT)
-
-
-/* SCTLR */
-#define M                  (M_MASK                  << M_SHIFT)
-#define TRE                (TRE_MASK                << TRE_SHIFT)
-#define AFE                (AFE_MASK                << AFE_SHIFT)
-#define HAF                (HAF_MASK                << HAF_SHIFT)
-#define BE                 (BE_MASK                 << BE_SHIFT)
-#define AFFD               (AFFD_MASK               << AFFD_SHIFT)
-
-
-/* TLBIASID */
-#define TLBIASID_ASID      (TLBIASID_ASID_MASK      << TLBIASID_ASID_SHIFT)
-
-
-/* TLBIVA */
-#define TLBIVA_ASID        (TLBIVA_ASID_MASK        << TLBIVA_ASID_SHIFT)
-#define TLBIVA_VA          (TLBIVA_VA_MASK          << TLBIVA_VA_SHIFT)
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA         (TLBIVAA_VA_MASK         << TLBIVAA_VA_SHIFT)
-
-
-/* TLBLCKR */
-#define LKE                (LKE_MASK                << LKE_SHIFT)
-#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
-#define TLBIASIDCFG        (TLBIASIDCFG_MASK        << TLBIASIDCFG_SHIFT)
-#define TLBIVAACFG         (TLBIVAACFG_MASK         << TLBIVAACFG_SHIFT)
-#define FLOOR              (FLOOR_MASK              << FLOOR_SHIFT)
-#define VICTIM             (VICTIM_MASK             << VICTIM_SHIFT)
-
-
-/* TTBCR */
-#define N                  (N_MASK                  << N_SHIFT)
-#define PD0                (PD0_MASK                << PD0_SHIFT)
-#define PD1                (PD1_MASK                << PD1_SHIFT)
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH        (TTBR0_IRGNH_MASK        << TTBR0_IRGNH_SHIFT)
-#define TTBR0_SH           (TTBR0_SH_MASK           << TTBR0_SH_SHIFT)
-#define TTBR0_ORGN         (TTBR0_ORGN_MASK         << TTBR0_ORGN_SHIFT)
-#define TTBR0_NOS          (TTBR0_NOS_MASK          << TTBR0_NOS_SHIFT)
-#define TTBR0_IRGNL        (TTBR0_IRGNL_MASK        << TTBR0_IRGNL_SHIFT)
-#define TTBR0_PA           (TTBR0_PA_MASK           << TTBR0_PA_SHIFT)
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH        (TTBR1_IRGNH_MASK        << TTBR1_IRGNH_SHIFT)
-#define TTBR1_SH           (TTBR1_SH_MASK           << TTBR1_SH_SHIFT)
-#define TTBR1_ORGN         (TTBR1_ORGN_MASK         << TTBR1_ORGN_SHIFT)
-#define TTBR1_NOS          (TTBR1_NOS_MASK          << TTBR1_NOS_SHIFT)
-#define TTBR1_IRGNL        (TTBR1_IRGNL_MASK        << TTBR1_IRGNL_SHIFT)
-#define TTBR1_PA           (TTBR1_PA_MASK           << TTBR1_PA_SHIFT)
-
-
-/* V2PSR */
-#define HIT                (HIT_MASK                << HIT_SHIFT)
-#define INDEX              (INDEX_MASK              << INDEX_SHIFT)
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX        (V2Pxx_INDEX_MASK        << V2Pxx_INDEX_SHIFT)
-#define V2Pxx_VA           (V2Pxx_VA_MASK           << V2Pxx_VA_SHIFT)
-
-
-/* Global Register Masks */
-/* CBACRn */
-#define RWVMID_MASK               0x1F
-#define RWE_MASK                  0x01
-#define RWGE_MASK                 0x01
-#define CBVMID_MASK               0x1F
-#define IRPTNDX_MASK              0xFF
-
-
-/* CR */
-#define RPUE_MASK                 0x01
-#define RPUERE_MASK               0x01
-#define RPUEIE_MASK               0x01
-#define DCDEE_MASK                0x01
-#define CLIENTPD_MASK             0x01
-#define STALLD_MASK               0x01
-#define TLBLKCRWE_MASK            0x01
-#define CR_TLBIALLCFG_MASK        0x01
-#define TLBIVMIDCFG_MASK          0x01
-#define CR_HUME_MASK              0x01
-
-
-/* ESR */
-#define CFG_MASK                  0x01
-#define BYPASS_MASK               0x01
-#define ESR_MULTI_MASK            0x01
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_MASK          0xFF
-#define ESYNR0_APID_MASK          0x1F
-#define ESYNR0_ABID_MASK          0x07
-#define ESYNR0_AVMID_MASK         0x1F
-#define ESYNR0_ATID_MASK          0xFF
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_MASK             0x07
-#define ESYNR1_ASHARED_MASK              0x01
-#define ESYNR1_AINNERSHARED_MASK         0x01
-#define ESYNR1_APRIV_MASK                0x01
-#define ESYNR1_APROTNS_MASK              0x01
-#define ESYNR1_AINST_MASK                0x01
-#define ESYNR1_AWRITE_MASK               0x01
-#define ESYNR1_ABURST_MASK               0x01
-#define ESYNR1_ALEN_MASK                 0x0F
-#define ESYNR1_ASIZE_MASK                0x01
-#define ESYNR1_ALOCK_MASK                0x03
-#define ESYNR1_AOOO_MASK                 0x01
-#define ESYNR1_AFULL_MASK                0x01
-#define ESYNR1_AC_MASK                   0x01
-#define ESYNR1_DCD_MASK                  0x01
-
-
-/* IDR */
-#define NM2VCBMT_MASK             0x1FF
-#define HTW_MASK                  0x01
-#define HUM_MASK                  0x01
-#define TLBSIZE_MASK              0x0F
-#define NCB_MASK                  0xFF
-#define NIRPT_MASK                0xFF
-
-
-/* M2VCBRn */
-#define VMID_MASK                 0x1F
-#define CBNDX_MASK                0xFF
-#define BYPASSD_MASK              0x01
-#define BPRCOSH_MASK              0x01
-#define BPRCISH_MASK              0x01
-#define BPRCNSH_MASK              0x01
-#define BPSHCFG_MASK              0x03
-#define NSCFG_MASK                0x03
-#define BPMTCFG_MASK              0x01
-#define BPMEMTYPE_MASK            0x07
-
-
-/* REV */
-#define MINOR_MASK                0x0F
-#define MAJOR_MASK                0x0F
-
-
-/* TESTBUSCR */
-#define TBE_MASK                  0x01
-#define SPDMBE_MASK               0x01
-#define WGSEL_MASK                0x03
-#define TBLSEL_MASK               0x03
-#define TBHSEL_MASK               0x03
-#define SPDM0SEL_MASK             0x0F
-#define SPDM1SEL_MASK             0x0F
-#define SPDM2SEL_MASK             0x0F
-#define SPDM3SEL_MASK             0x0F
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_MASK        0x1F
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_MASK         0xFF
-#define TLBBFBS_MASK              0x03
-
-
-/* TLBTR0 */
-#define PR_MASK                   0x01
-#define PW_MASK                   0x01
-#define UR_MASK                   0x01
-#define UW_MASK                   0x01
-#define XN_MASK                   0x01
-#define NSDESC_MASK               0x01
-#define ISH_MASK                  0x01
-#define SH_MASK                   0x01
-#define MT_MASK                   0x07
-#define DPSIZR_MASK               0x07
-#define DPSIZC_MASK               0x07
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_MASK          0x1F
-#define TLBTR1_PA_MASK            0x000FFFFF
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_MASK          0xFF
-#define TLBTR2_V_MASK             0x01
-#define TLBTR2_NSTID_MASK         0x01
-#define TLBTR2_NV_MASK            0x01
-#define TLBTR2_VA_MASK            0x000FFFFF
-
-
-/* Global Register Shifts */
-/* CBACRn */
-#define RWVMID_SHIFT             0
-#define RWE_SHIFT                8
-#define RWGE_SHIFT               9
-#define CBVMID_SHIFT             16
-#define IRPTNDX_SHIFT            24
-
-
-/* CR */
-#define RPUE_SHIFT               0
-#define RPUERE_SHIFT             1
-#define RPUEIE_SHIFT             2
-#define DCDEE_SHIFT              3
-#define CLIENTPD_SHIFT           4
-#define STALLD_SHIFT             5
-#define TLBLKCRWE_SHIFT          6
-#define CR_TLBIALLCFG_SHIFT      7
-#define TLBIVMIDCFG_SHIFT        8
-#define CR_HUME_SHIFT            9
-
-
-/* ESR */
-#define CFG_SHIFT                0
-#define BYPASS_SHIFT             1
-#define ESR_MULTI_SHIFT          31
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_SHIFT        0
-#define ESYNR0_APID_SHIFT        8
-#define ESYNR0_ABID_SHIFT        13
-#define ESYNR0_AVMID_SHIFT       16
-#define ESYNR0_ATID_SHIFT        24
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_SHIFT           0
-#define ESYNR1_ASHARED_SHIFT            3
-#define ESYNR1_AINNERSHARED_SHIFT       4
-#define ESYNR1_APRIV_SHIFT              5
-#define ESYNR1_APROTNS_SHIFT            6
-#define ESYNR1_AINST_SHIFT              7
-#define ESYNR1_AWRITE_SHIFT             8
-#define ESYNR1_ABURST_SHIFT             10
-#define ESYNR1_ALEN_SHIFT               12
-#define ESYNR1_ASIZE_SHIFT              16
-#define ESYNR1_ALOCK_SHIFT              20
-#define ESYNR1_AOOO_SHIFT               22
-#define ESYNR1_AFULL_SHIFT              24
-#define ESYNR1_AC_SHIFT                 30
-#define ESYNR1_DCD_SHIFT                31
-
-
-/* IDR */
-#define NM2VCBMT_SHIFT           0
-#define HTW_SHIFT                9
-#define HUM_SHIFT                10
-#define TLBSIZE_SHIFT            12
-#define NCB_SHIFT                16
-#define NIRPT_SHIFT              24
-
-
-/* M2VCBRn */
-#define VMID_SHIFT               0
-#define CBNDX_SHIFT              8
-#define BYPASSD_SHIFT            16
-#define BPRCOSH_SHIFT            17
-#define BPRCISH_SHIFT            18
-#define BPRCNSH_SHIFT            19
-#define BPSHCFG_SHIFT            20
-#define NSCFG_SHIFT              22
-#define BPMTCFG_SHIFT            24
-#define BPMEMTYPE_SHIFT          25
-
-
-/* REV */
-#define MINOR_SHIFT              0
-#define MAJOR_SHIFT              4
-
-
-/* TESTBUSCR */
-#define TBE_SHIFT                0
-#define SPDMBE_SHIFT             1
-#define WGSEL_SHIFT              8
-#define TBLSEL_SHIFT             12
-#define TBHSEL_SHIFT             14
-#define SPDM0SEL_SHIFT           16
-#define SPDM1SEL_SHIFT           20
-#define SPDM2SEL_SHIFT           24
-#define SPDM3SEL_SHIFT           28
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_SHIFT      0
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_SHIFT       0
-#define TLBBFBS_SHIFT            8
-
-
-/* TLBTR0 */
-#define PR_SHIFT                 0
-#define PW_SHIFT                 1
-#define UR_SHIFT                 2
-#define UW_SHIFT                 3
-#define XN_SHIFT                 4
-#define NSDESC_SHIFT             6
-#define ISH_SHIFT                7
-#define SH_SHIFT                 8
-#define MT_SHIFT                 9
-#define DPSIZR_SHIFT             16
-#define DPSIZC_SHIFT             20
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_SHIFT        0
-#define TLBTR1_PA_SHIFT          12
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_SHIFT        0
-#define TLBTR2_V_SHIFT           8
-#define TLBTR2_NSTID_SHIFT       9
-#define TLBTR2_NV_SHIFT          10
-#define TLBTR2_VA_SHIFT          12
-
-
-/* Context Register Masks */
-/* ACTLR */
-#define CFERE_MASK                       0x01
-#define CFEIE_MASK                       0x01
-#define PTSHCFG_MASK                     0x03
-#define RCOSH_MASK                       0x01
-#define RCISH_MASK                       0x01
-#define RCNSH_MASK                       0x01
-#define PRIVCFG_MASK                     0x03
-#define DNA_MASK                         0x01
-#define DNLV2PA_MASK                     0x01
-#define TLBMCFG_MASK                     0x03
-#define CFCFG_MASK                       0x01
-#define TIPCF_MASK                       0x01
-#define V2PCFG_MASK                      0x03
-#define HUME_MASK                        0x01
-#define PTMTCFG_MASK                     0x01
-#define PTMEMTYPE_MASK                   0x07
-
-
-/* BFBCR */
-#define BFBDFE_MASK                      0x01
-#define BFBSFE_MASK                      0x01
-#define SFVS_MASK                        0x01
-#define FLVIC_MASK                       0x0F
-#define SLVIC_MASK                       0x0F
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_MASK             0xFF
-#define PROCID_MASK                      0x00FFFFFF
-
-
-/* FSR */
-#define TF_MASK                          0x01
-#define AFF_MASK                         0x01
-#define APF_MASK                         0x01
-#define TLBMF_MASK                       0x01
-#define HTWDEEF_MASK                     0x01
-#define HTWSEEF_MASK                     0x01
-#define MHF_MASK                         0x01
-#define SL_MASK                          0x01
-#define SS_MASK                          0x01
-#define MULTI_MASK                       0x01
-
-
-/* FSYNR0 */
-#define AMID_MASK                        0xFF
-#define APID_MASK                        0x1F
-#define ABID_MASK                        0x07
-#define ATID_MASK                        0xFF
-
-
-/* FSYNR1 */
-#define AMEMTYPE_MASK                    0x07
-#define ASHARED_MASK                     0x01
-#define AINNERSHARED_MASK                0x01
-#define APRIV_MASK                       0x01
-#define APROTNS_MASK                     0x01
-#define AINST_MASK                       0x01
-#define AWRITE_MASK                      0x01
-#define ABURST_MASK                      0x01
-#define ALEN_MASK                        0x0F
-#define FSYNR1_ASIZE_MASK                0x07
-#define ALOCK_MASK                       0x03
-#define AFULL_MASK                       0x01
-
-
-/* NMRR */
-#define ICPC0_MASK                       0x03
-#define ICPC1_MASK                       0x03
-#define ICPC2_MASK                       0x03
-#define ICPC3_MASK                       0x03
-#define ICPC4_MASK                       0x03
-#define ICPC5_MASK                       0x03
-#define ICPC6_MASK                       0x03
-#define ICPC7_MASK                       0x03
-#define OCPC0_MASK                       0x03
-#define OCPC1_MASK                       0x03
-#define OCPC2_MASK                       0x03
-#define OCPC3_MASK                       0x03
-#define OCPC4_MASK                       0x03
-#define OCPC5_MASK                       0x03
-#define OCPC6_MASK                       0x03
-#define OCPC7_MASK                       0x03
-
-
-/* PAR */
-#define FAULT_MASK                       0x01
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_MASK                    0x01
-#define FAULT_AFF_MASK                   0x01
-#define FAULT_APF_MASK                   0x01
-#define FAULT_TLBMF_MASK                 0x01
-#define FAULT_HTWDEEF_MASK               0x01
-#define FAULT_HTWSEEF_MASK               0x01
-#define FAULT_MHF_MASK                   0x01
-#define FAULT_SL_MASK                    0x01
-#define FAULT_SS_MASK                    0x01
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_MASK              0x01
-#define PAR_NOFAULT_MT_MASK              0x07
-#define PAR_NOFAULT_SH_MASK              0x01
-#define PAR_NOFAULT_NS_MASK              0x01
-#define PAR_NOFAULT_NOS_MASK             0x01
-#define PAR_NPFAULT_PA_MASK              0x000FFFFF
-
-
-/* PRRR */
-#define MTC0_MASK                        0x03
-#define MTC1_MASK                        0x03
-#define MTC2_MASK                        0x03
-#define MTC3_MASK                        0x03
-#define MTC4_MASK                        0x03
-#define MTC5_MASK                        0x03
-#define MTC6_MASK                        0x03
-#define MTC7_MASK                        0x03
-#define SHDSH0_MASK                      0x01
-#define SHDSH1_MASK                      0x01
-#define SHNMSH0_MASK                     0x01
-#define SHNMSH1_MASK                     0x01
-#define NOS0_MASK                        0x01
-#define NOS1_MASK                        0x01
-#define NOS2_MASK                        0x01
-#define NOS3_MASK                        0x01
-#define NOS4_MASK                        0x01
-#define NOS5_MASK                        0x01
-#define NOS6_MASK                        0x01
-#define NOS7_MASK                        0x01
-
-
-/* RESUME */
-#define TNR_MASK                         0x01
-
-
-/* SCTLR */
-#define M_MASK                           0x01
-#define TRE_MASK                         0x01
-#define AFE_MASK                         0x01
-#define HAF_MASK                         0x01
-#define BE_MASK                          0x01
-#define AFFD_MASK                        0x01
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_MASK               0xFF
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_MASK                 0xFF
-#define TLBIVA_VA_MASK                   0x000FFFFF
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_MASK                  0x000FFFFF
-
-
-/* TLBLCKR */
-#define LKE_MASK                         0x01
-#define TLBLCKR_TLBIALLCFG_MASK          0x01
-#define TLBIASIDCFG_MASK                 0x01
-#define TLBIVAACFG_MASK                  0x01
-#define FLOOR_MASK                       0xFF
-#define VICTIM_MASK                      0xFF
-
-
-/* TTBCR */
-#define N_MASK                           0x07
-#define PD0_MASK                         0x01
-#define PD1_MASK                         0x01
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_MASK                 0x01
-#define TTBR0_SH_MASK                    0x01
-#define TTBR0_ORGN_MASK                  0x03
-#define TTBR0_NOS_MASK                   0x01
-#define TTBR0_IRGNL_MASK                 0x01
-#define TTBR0_PA_MASK                    0x0003FFFF
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_MASK                 0x01
-#define TTBR1_SH_MASK                    0x01
-#define TTBR1_ORGN_MASK                  0x03
-#define TTBR1_NOS_MASK                   0x01
-#define TTBR1_IRGNL_MASK                 0x01
-#define TTBR1_PA_MASK                    0x0003FFFF
-
-
-/* V2PSR */
-#define HIT_MASK                         0x01
-#define INDEX_MASK                       0xFF
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_MASK                 0xFF
-#define V2Pxx_VA_MASK                    0x000FFFFF
-
-
-/* Context Register Shifts */
-/* ACTLR */
-#define CFERE_SHIFT                    0
-#define CFEIE_SHIFT                    1
-#define PTSHCFG_SHIFT                  2
-#define RCOSH_SHIFT                    4
-#define RCISH_SHIFT                    5
-#define RCNSH_SHIFT                    6
-#define PRIVCFG_SHIFT                  8
-#define DNA_SHIFT                      10
-#define DNLV2PA_SHIFT                  11
-#define TLBMCFG_SHIFT                  12
-#define CFCFG_SHIFT                    14
-#define TIPCF_SHIFT                    15
-#define V2PCFG_SHIFT                   16
-#define HUME_SHIFT                     18
-#define PTMTCFG_SHIFT                  20
-#define PTMEMTYPE_SHIFT                21
-
-
-/* BFBCR */
-#define BFBDFE_SHIFT                   0
-#define BFBSFE_SHIFT                   1
-#define SFVS_SHIFT                     2
-#define FLVIC_SHIFT                    4
-#define SLVIC_SHIFT                    8
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_SHIFT          0
-#define PROCID_SHIFT                   8
-
-
-/* FSR */
-#define TF_SHIFT                       1
-#define AFF_SHIFT                      2
-#define APF_SHIFT                      3
-#define TLBMF_SHIFT                    4
-#define HTWDEEF_SHIFT                  5
-#define HTWSEEF_SHIFT                  6
-#define MHF_SHIFT                      7
-#define SL_SHIFT                       16
-#define SS_SHIFT                       30
-#define MULTI_SHIFT                    31
-
-
-/* FSYNR0 */
-#define AMID_SHIFT                     0
-#define APID_SHIFT                     8
-#define ABID_SHIFT                     13
-#define ATID_SHIFT                     24
-
-
-/* FSYNR1 */
-#define AMEMTYPE_SHIFT                 0
-#define ASHARED_SHIFT                  3
-#define AINNERSHARED_SHIFT             4
-#define APRIV_SHIFT                    5
-#define APROTNS_SHIFT                  6
-#define AINST_SHIFT                    7
-#define AWRITE_SHIFT                   8
-#define ABURST_SHIFT                   10
-#define ALEN_SHIFT                     12
-#define FSYNR1_ASIZE_SHIFT             16
-#define ALOCK_SHIFT                    20
-#define AFULL_SHIFT                    24
-
-
-/* NMRR */
-#define ICPC0_SHIFT                    0
-#define ICPC1_SHIFT                    2
-#define ICPC2_SHIFT                    4
-#define ICPC3_SHIFT                    6
-#define ICPC4_SHIFT                    8
-#define ICPC5_SHIFT                    10
-#define ICPC6_SHIFT                    12
-#define ICPC7_SHIFT                    14
-#define OCPC0_SHIFT                    16
-#define OCPC1_SHIFT                    18
-#define OCPC2_SHIFT                    20
-#define OCPC3_SHIFT                    22
-#define OCPC4_SHIFT                    24
-#define OCPC5_SHIFT                    26
-#define OCPC6_SHIFT                    28
-#define OCPC7_SHIFT                    30
-
-
-/* PAR */
-#define FAULT_SHIFT                    0
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_SHIFT                 1
-#define FAULT_AFF_SHIFT                2
-#define FAULT_APF_SHIFT                3
-#define FAULT_TLBMF_SHIFT              4
-#define FAULT_HTWDEEF_SHIFT            5
-#define FAULT_HTWSEEF_SHIFT            6
-#define FAULT_MHF_SHIFT                7
-#define FAULT_SL_SHIFT                 16
-#define FAULT_SS_SHIFT                 30
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_SHIFT           1
-#define PAR_NOFAULT_MT_SHIFT           4
-#define PAR_NOFAULT_SH_SHIFT           7
-#define PAR_NOFAULT_NS_SHIFT           9
-#define PAR_NOFAULT_NOS_SHIFT          10
-#define PAR_NPFAULT_PA_SHIFT           12
-
-
-/* PRRR */
-#define MTC0_SHIFT                     0
-#define MTC1_SHIFT                     2
-#define MTC2_SHIFT                     4
-#define MTC3_SHIFT                     6
-#define MTC4_SHIFT                     8
-#define MTC5_SHIFT                     10
-#define MTC6_SHIFT                     12
-#define MTC7_SHIFT                     14
-#define SHDSH0_SHIFT                   16
-#define SHDSH1_SHIFT                   17
-#define SHNMSH0_SHIFT                  18
-#define SHNMSH1_SHIFT                  19
-#define NOS0_SHIFT                     24
-#define NOS1_SHIFT                     25
-#define NOS2_SHIFT                     26
-#define NOS3_SHIFT                     27
-#define NOS4_SHIFT                     28
-#define NOS5_SHIFT                     29
-#define NOS6_SHIFT                     30
-#define NOS7_SHIFT                     31
-
-
-/* RESUME */
-#define TNR_SHIFT                      0
-
-
-/* SCTLR */
-#define M_SHIFT                        0
-#define TRE_SHIFT                      1
-#define AFE_SHIFT                      2
-#define HAF_SHIFT                      3
-#define BE_SHIFT                       4
-#define AFFD_SHIFT                     5
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_SHIFT            0
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_SHIFT              0
-#define TLBIVA_VA_SHIFT                12
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_SHIFT               12
-
-
-/* TLBLCKR */
-#define LKE_SHIFT                      0
-#define TLBLCKR_TLBIALLCFG_SHIFT       1
-#define TLBIASIDCFG_SHIFT              2
-#define TLBIVAACFG_SHIFT               3
-#define FLOOR_SHIFT                    8
-#define VICTIM_SHIFT                   8
-
-
-/* TTBCR */
-#define N_SHIFT                        3
-#define PD0_SHIFT                      4
-#define PD1_SHIFT                      5
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_SHIFT              0
-#define TTBR0_SH_SHIFT                 1
-#define TTBR0_ORGN_SHIFT               3
-#define TTBR0_NOS_SHIFT                5
-#define TTBR0_IRGNL_SHIFT              6
-#define TTBR0_PA_SHIFT                 14
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_SHIFT              0
-#define TTBR1_SH_SHIFT                 1
-#define TTBR1_ORGN_SHIFT               3
-#define TTBR1_NOS_SHIFT                5
-#define TTBR1_IRGNL_SHIFT              6
-#define TTBR1_PA_SHIFT                 14
-
-
-/* V2PSR */
-#define HIT_SHIFT                      0
-#define INDEX_SHIFT                    8
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_SHIFT              0
-#define V2Pxx_VA_SHIFT                 12
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h
deleted file mode 100644
index 81ab2a6792bd..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-8960.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Copyright (c) 2011 Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8960_H
-#define __ASM_ARCH_MSM_IRQS_8960_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
-   16-31: PPI (private peripheral interrupts)
-   32+:   SPI (shared peripheral interrupts) */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_VGIC				(GIC_PPI_START + 0)
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 2)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 3)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 5)
-#define AVS_SVICINT				(GIC_PPI_START + 6)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 8)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 9)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 10)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 11)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 12)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 13)
-#define SC_SICCPUXEXTFAULTIRPTREQ		(GIC_PPI_START + 14)
-/* PPI 15 is unused */
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2PERFMONIRPTREQ			(GIC_SPI_START + 2)
-#define SC_SICAGCIRPTREQ			(GIC_SPI_START + 3)
-#define TLMM_APCC_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_APCC_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_APCC_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_APCC_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_APCC_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_APCC_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_APCC_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_APCC_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_APCC_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_APCC_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8921_SEC_IRQ_103			(GIC_SPI_START + 14)
-#define PM8018_SEC_IRQ_106			(GIC_SPI_START + 15)
-#define TLMM_APCC_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_APCC_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_APCC_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_APCC_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_APCC_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_APCC_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_APCC_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_APCC_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_APCC_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define SLIMBUS0_CORE_EE1_IRQ			(GIC_SPI_START + 33)
-#define SLIMBUS0_BAM_EE1_IRQ			(GIC_SPI_START + 34)
-#define Q6FW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 35)
-#define Q6SW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 36)
-#define MSS_TO_APPS_IRQ_0			(GIC_SPI_START + 37)
-#define MSS_TO_APPS_IRQ_1			(GIC_SPI_START + 38)
-#define MSS_TO_APPS_IRQ_2			(GIC_SPI_START + 39)
-#define MSS_TO_APPS_IRQ_3			(GIC_SPI_START + 40)
-#define MSS_TO_APPS_IRQ_4			(GIC_SPI_START + 41)
-#define MSS_TO_APPS_IRQ_5			(GIC_SPI_START + 42)
-#define MSS_TO_APPS_IRQ_6			(GIC_SPI_START + 43)
-#define MSS_TO_APPS_IRQ_7			(GIC_SPI_START + 44)
-#define MSS_TO_APPS_IRQ_8			(GIC_SPI_START + 45)
-#define MSS_TO_APPS_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI1_IRQ				(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define CSIPHY_4LN_IRQ				(GIC_SPI_START + 139)
-#define CSIPHY_2LN_IRQ				(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define GSBI1_UARTDM_IRQ			(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define GSBI2_UARTDM_IRQ			(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ			        (GIC_SPI_START + 149)
-#define GSBI3_UARTDM_IRQ			(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define GSBI4_UARTDM_IRQ			(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define GSBI5_UARTDM_IRQ			(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define GSBI6_UARTDM_IRQ			(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define GSBI7_UARTDM_IRQ			(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define GSBI8_UARTDM_IRQ			(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define DSI2_IRQ				(GIC_SPI_START + 166)
-#define ISPIF_IRQ				(GIC_SPI_START + 167)
-#define MSMC_SC_SEC_TMR_IRQ			(GIC_SPI_START + 168)
-#define MSMC_SC_SEC_WDOG_BARK_IRQ		(GIC_SPI_START + 169)
-#define INT_ADM0_SCSS_0_IRQ			(GIC_SPI_START + 170)
-#define INT_ADM0_SCSS_1_IRQ			(GIC_SPI_START + 171)
-#define INT_ADM0_SCSS_2_IRQ			(GIC_SPI_START + 172)
-#define INT_ADM0_SCSS_3_IRQ			(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_EBI1CH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1CH1_IRQ			(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define GSBI9_UARTDM_IRQ			(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define GSBI10_UARTDM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define GSBI11_UARTDM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define GSBI12_UARTDM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-#define RIVA_APSS_LTECOEX_IRQ			(GIC_SPI_START + 197)
-#define RIVA_APSS_SPARE_IRQ			(GIC_SPI_START + 198)
-#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ	(GIC_SPI_START + 199)
-#define RIVA_ASS_RESET_DONE_IRQ			(GIC_SPI_START + 200)
-#define RIVA_APSS_ASIC_IRQ			(GIC_SPI_START + 201)
-#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ	(GIC_SPI_START + 202)
-#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ	(GIC_SPI_START + 203)
-#define RIVA_APPS_WLAM_SMSM_IRQ			(GIC_SPI_START + 204)
-#define RIVA_APPS_LOG_CTRL_IRQ			(GIC_SPI_START + 205)
-#define RIVA_APPS_FM_CTRL_IRQ			(GIC_SPI_START + 206)
-#define RIVA_APPS_HCI_IRQ			(GIC_SPI_START + 207)
-#define RIVA_APPS_WLAN_CTRL_IRQ			(GIC_SPI_START + 208)
-#define A2_BAM_IRQ				(GIC_SPI_START + 209)
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 211)
-#define GFX2D1_IRQ				(GIC_SPI_START + 212)
-#define PPSS_WDOG_TIMER_IRQ			(GIC_SPI_START + 213)
-#define SPS_SLIMBUS_CORE_EE0_IRQ		(GIC_SPI_START + 214)
-#define SPS_SLIMBUS_BAM_EE0_IRQ			(GIC_SPI_START + 215)
-#define QDSS_ETB_IRQ				(GIC_SPI_START + 216)
-#define QDSS_CTI2KPSS_CPU1_IRQ			(GIC_SPI_START + 217)
-#define QDSS_CTI2KPSS_CPU0_IRQ			(GIC_SPI_START + 218)
-#define TLMM_APCC_DIR_CONN_IRQ_16		(GIC_SPI_START + 219)
-#define TLMM_APCC_DIR_CONN_IRQ_17		(GIC_SPI_START + 220)
-#define TLMM_APCC_DIR_CONN_IRQ_18		(GIC_SPI_START + 221)
-#define TLMM_APCC_DIR_CONN_IRQ_19		(GIC_SPI_START + 222)
-#define TLMM_APCC_DIR_CONN_IRQ_20		(GIC_SPI_START + 223)
-#define TLMM_APCC_DIR_CONN_IRQ_21		(GIC_SPI_START + 224)
-#define PM8921_SEC_IRQ_104			(GIC_SPI_START + 225)
-#define PM8018_SEC_IRQ_107			(GIC_SPI_START + 226)
-
-/* For now, use the maximum number of interrupts until a pending GIC issue
- * is sorted out */
-#define NR_MSM_IRQS 1020
-#define NR_BOARD_IRQS 0
-#define NR_GPIO_IRQS 0
-
-#endif
-
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
deleted file mode 100644
index f65841c74c0b..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
-#define __ASM_ARCH_MSM_IRQS_8X60_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
- * 16-31: PPI (private peripheral interrupts)
- * 32+:   SPI (shared peripheral interrupts)
- */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define AVS_SVICINT				(GIC_PPI_START + 5)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
-/* PPI 13 to 15 are unused */
-
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
-#define NC					(GIC_SPI_START + 3)
-#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
-#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
-#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define MARM_FIQ				(GIC_SPI_START + 33)
-#define MARM_IRQ				(GIC_SPI_START + 34)
-#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
-#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
-#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
-#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
-#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
-#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
-#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
-#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
-#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
-#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
-#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
-#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI_IRQ					(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
-#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
-#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
-#define INT_ADM1_AARM				(GIC_SPI_START + 167)
-#define INT_ADM1_SD2				(GIC_SPI_START + 168)
-#define INT_ADM1_SD3				(GIC_SPI_START + 169)
-#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
-#define INT_ADM0_AARM				(GIC_SPI_START + 171)
-#define INT_ADM0_SD2				(GIC_SPI_START + 172)
-#define INT_ADM0_SD3				(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-
-/*SPI 197 to 209 arent used in 8x60*/
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ            (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ        (GIC_SPI_START + 211)
-
-/*SPI 212 to 216 arent used in 8x60*/
-#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
-#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
-#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
-#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
-#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
-#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
-#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
-
-#define NR_GPIO_IRQS 173
-#define NR_MSM_IRQS 256
-#define NR_BOARD_IRQS 0
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 3cd78b165abb..164d355c96ea 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,11 +24,6 @@
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "irqs-8x50.h"
 #include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "irqs-8x60.h"
-#elif defined(CONFIG_ARCH_MSM8960)
-/* TODO: Make these not generic. */
-#include "irqs-8960.h"
 #elif defined(CONFIG_ARCH_MSM_ARM11)
 #include "irqs-7x00.h"
 #else
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
deleted file mode 100644
index 7bca8d7108d6..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8960_H
-#define __ASM_ARCH_MSM_IOMAP_8960_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM8960_TMR_PHYS	0x0200A000
-#define MSM8960_TMR_SIZE	SZ_4K
-
-#define MSM8960_TMR0_PHYS	0x0208A000
-#define MSM8960_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x16440000
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
deleted file mode 100644
index 75a7b62c1c74..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
-#define __ASM_ARCH_MSM_IOMAP_8X60_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_TLMM_BASE		IOMEM(0xF0004000)
-#define MSM_TLMM_PHYS		0x00800000
-#define MSM_TLMM_SIZE		SZ_16K
-
-#define MSM8X60_TMR_PHYS	0x02000000
-#define MSM8X60_TMR_SIZE	SZ_4K
-
-#define MSM8X60_TMR0_PHYS	0x02040000
-#define MSM8X60_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x19C40000
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index c56e81ffdcde..0e4f49157684 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -45,25 +45,8 @@
 #include "msm_iomap-7x00.h"
 #endif
 
-#include "msm_iomap-8x60.h"
-#include "msm_iomap-8960.h"
-
-#define MSM_DEBUG_UART_SIZE	SZ_4K
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
-#endif
-
 /* Virtual addresses shared across all MSM targets. */
 #define MSM_CSR_BASE		IOMEM(0xE0001000)
-#define MSM_TMR_BASE		IOMEM(0xF0200000)
-#define MSM_TMR0_BASE		IOMEM(0xF0201000)
 #define MSM_GPIO1_BASE		IOMEM(0xE0003000)
 #define MSM_GPIO2_BASE		IOMEM(0xE0004000)
 
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
deleted file mode 100644
index 94324870fb04..000000000000
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-#define __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-#include <mach/msm_iomap.h>
-
-#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
-#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
-
-#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
-#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
-#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
-#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
-#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
-
-static void putc(int c)
-{
-#if defined(MSM_DEBUG_UART_PHYS)
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
-	/*
-	 * Wait for TX_READY to be set; but skip it if we have a
-	 * TX underrun.
-	 */
-	if (!(UART_DM_SR & 0x08))
-		while (!(UART_DM_ISR & 0x80))
-			cpu_relax();
-
-	UART_DM_CR = 0x300;
-	UART_DM_NCHAR = 0x1;
-	UART_DM_TF = c;
-#else
-	while (!(UART_CSR & 0x04))
-		cpu_relax();
-	UART_TF = c;
-#endif
-#endif
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 3dc04ccaf59f..adc8971c7266 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/bug.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/export.h>
@@ -27,8 +28,6 @@
 #include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-
 #include "common.h"
 
 #define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {			      \
@@ -52,26 +51,38 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
 	MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
 	MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
 	},
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+		defined(CONFIG_DEBUG_MSM_UART3)
+	{
+		/* Must be last: virtual and pfn filled in by debug_ll_addr() */
+		.length = SZ_4K,
+		.type = MT_DEVICE_NONSHARED,
+	}
+#endif
 };
 
 void __init msm_map_common_io(void)
 {
+	size_t size = ARRAY_SIZE(msm_io_desc);
+
 	/* Make sure the peripheral register window is closed, since
 	 * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
 	 * pages are peripheral interface or not.
 	 */
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-	iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+		defined(CONFIG_DEBUG_MSM_UART3)
+	debug_ll_addr(&msm_io_desc[size - 1].pfn,
+		      &msm_io_desc[size - 1].virtual);
+	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
+#endif
+	iotable_init(msm_io_desc, size);
 }
 #endif
 
@@ -87,10 +98,6 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 	MSM_DEVICE(SCPLL),
 	MSM_DEVICE(AD5),
 	MSM_DEVICE(MDC),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
@@ -101,40 +108,11 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 
 void __init msm_map_qsd8x50_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
 }
 #endif /* CONFIG_ARCH_QSD8X50 */
 
-#ifdef CONFIG_ARCH_MSM8X60
-static struct map_desc msm8x60_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(TMR, MSM8X60),
-	MSM_CHIP_DEVICE(TMR0, MSM8X60),
-#ifdef CONFIG_DEBUG_MSM8660_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8x60_io(void)
-{
-	iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8X60 */
-
-#ifdef CONFIG_ARCH_MSM8960
-static struct map_desc msm8960_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(TMR, MSM8960),
-	MSM_CHIP_DEVICE(TMR0, MSM8960),
-#ifdef CONFIG_DEBUG_MSM8960_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8960_io(void)
-{
-	iotable_init(msm8960_io_desc, ARRAY_SIZE(msm8960_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8960 */
-
 #ifdef CONFIG_ARCH_MSM7X30
 static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
@@ -150,10 +128,6 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(SAW),
 	MSM_DEVICE(GCC),
 	MSM_DEVICE(TCSR),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
@@ -164,10 +138,12 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 
 void __init msm_map_msm7x30_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
 }
 #endif /* CONFIG_ARCH_MSM7X30 */
 
+#ifdef CONFIG_ARCH_MSM7X00A
 void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 				   unsigned int mtype, void *caller)
 {
@@ -182,3 +158,4 @@ void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
+#endif
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 8697cfc0d0b6..1e9c3383daba 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -16,6 +16,7 @@
 
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -26,7 +27,6 @@
 #include <linux/sched_clock.h>
 
 #include <asm/mach/time.h>
-#include <asm/localtimer.h>
 
 #include "common.h"
 
@@ -49,7 +49,7 @@ static void __iomem *sts_base;
 
 static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	struct clock_event_device *evt = dev_id;
 	/* Stop the timer tick */
 	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
 		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
@@ -101,18 +101,7 @@ static void msm_timer_set_mode(enum clock_event_mode mode,
 	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
 }
 
-static struct clock_event_device msm_clockevent = {
-	.name		= "gp_timer",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= msm_timer_set_next_event,
-	.set_mode	= msm_timer_set_mode,
-};
-
-static union {
-	struct clock_event_device *evt;
-	struct clock_event_device * __percpu *percpu_evt;
-} msm_evt;
+static struct clock_event_device __percpu *msm_evt;
 
 static void __iomem *source_base;
 
@@ -138,23 +127,34 @@ static struct clocksource msm_clocksource = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#ifdef CONFIG_LOCAL_TIMERS
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
 static int msm_local_timer_setup(struct clock_event_device *evt)
 {
-	/* Use existing clock_event for cpu 0 */
-	if (!smp_processor_id())
-		return 0;
-
-	evt->irq = msm_clockevent.irq;
-	evt->name = "local_timer";
-	evt->features = msm_clockevent.features;
-	evt->rating = msm_clockevent.rating;
+	int cpu = smp_processor_id();
+	int err;
+
+	evt->irq = msm_timer_irq;
+	evt->name = "msm_timer";
+	evt->features = CLOCK_EVT_FEAT_ONESHOT;
+	evt->rating = 200;
 	evt->set_mode = msm_timer_set_mode;
 	evt->set_next_event = msm_timer_set_next_event;
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+	if (msm_timer_has_ppi) {
+		enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+	} else {
+		err = request_irq(evt->irq, msm_timer_interrupt,
+				IRQF_TIMER | IRQF_NOBALANCING |
+				IRQF_TRIGGER_RISING, "gp_timer", evt);
+		if (err)
+			pr_err("request_irq failed\n");
+	}
 
-	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-	clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000);
-	enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
 	return 0;
 }
 
@@ -164,11 +164,28 @@ static void msm_local_timer_stop(struct clock_event_device *evt)
 	disable_percpu_irq(evt->irq);
 }
 
-static struct local_timer_ops msm_local_timer_ops = {
-	.setup	= msm_local_timer_setup,
-	.stop	= msm_local_timer_stop,
+static int msm_timer_cpu_notify(struct notifier_block *self,
+					   unsigned long action, void *hcpu)
+{
+	/*
+	 * Grab cpu pointer in each case to avoid spurious
+	 * preemptible warnings
+	 */
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		msm_local_timer_setup(this_cpu_ptr(msm_evt));
+		break;
+	case CPU_DYING:
+		msm_local_timer_stop(this_cpu_ptr(msm_evt));
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block msm_timer_cpu_nb = {
+	.notifier_call = msm_timer_cpu_notify,
 };
-#endif /* CONFIG_LOCAL_TIMERS */
 
 static notrace u32 msm_sched_clock_read(void)
 {
@@ -178,38 +195,35 @@ static notrace u32 msm_sched_clock_read(void)
 static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 				  bool percpu)
 {
-	struct clock_event_device *ce = &msm_clockevent;
 	struct clocksource *cs = &msm_clocksource;
-	int res;
+	int res = 0;
+
+	msm_timer_irq = irq;
+	msm_timer_has_ppi = percpu;
+
+	msm_evt = alloc_percpu(struct clock_event_device);
+	if (!msm_evt) {
+		pr_err("memory allocation failed for clockevents\n");
+		goto err;
+	}
 
-	ce->cpumask = cpumask_of(0);
-	ce->irq = irq;
+	if (percpu)
+		res = request_percpu_irq(irq, msm_timer_interrupt,
+					 "gp_timer", msm_evt);
 
-	clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-	if (percpu) {
-		msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
-		if (!msm_evt.percpu_evt) {
-			pr_err("memory allocation failed for %s\n", ce->name);
+	if (res) {
+		pr_err("request_percpu_irq failed\n");
+	} else {
+		res = register_cpu_notifier(&msm_timer_cpu_nb);
+		if (res) {
+			free_percpu_irq(irq, msm_evt);
 			goto err;
 		}
-		*__this_cpu_ptr(msm_evt.percpu_evt) = ce;
-		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
-					 ce->name, msm_evt.percpu_evt);
-		if (!res) {
-			enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
-#ifdef CONFIG_LOCAL_TIMERS
-			local_timer_register(&msm_local_timer_ops);
-#endif
-		}
-	} else {
-		msm_evt.evt = ce;
-		res = request_irq(ce->irq, msm_timer_interrupt,
-				  IRQF_TIMER | IRQF_NOBALANCING |
-				  IRQF_TRIGGER_RISING, ce->name, &msm_evt.evt);
+
+		/* Immediately configure the timer on the boot CPU */
+		msm_local_timer_setup(__this_cpu_ptr(msm_evt));
 	}
 
-	if (res)
-		pr_err("request_irq failed for %s\n", ce->name);
 err:
 	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
 	res = clocksource_register_hz(cs, dgt_hz);
@@ -219,15 +233,8 @@ err:
 }
 
 #ifdef CONFIG_OF
-static const struct of_device_id msm_timer_match[] __initconst = {
-	{ .compatible = "qcom,kpss-timer" },
-	{ .compatible = "qcom,scss-timer" },
-	{ },
-};
-
-void __init msm_dt_timer_init(void)
+static void __init msm_dt_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	u32 freq;
 	int irq;
 	struct resource res;
@@ -235,12 +242,6 @@ void __init msm_dt_timer_init(void)
 	void __iomem *base;
 	void __iomem *cpu0_base;
 
-	np = of_find_matching_node(NULL, msm_timer_match);
-	if (!np) {
-		pr_err("Can't find msm timer DT node\n");
-		return;
-	}
-
 	base = of_iomap(np, 0);
 	if (!base) {
 		pr_err("Failed to map event base\n");
@@ -273,7 +274,6 @@ void __init msm_dt_timer_init(void)
 		pr_err("Unknown frequency\n");
 		return;
 	}
-	of_node_put(np);
 
 	event_base = base + 0x4;
 	sts_base = base + 0x88;
@@ -283,6 +283,8 @@ void __init msm_dt_timer_init(void)
 
 	msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
+CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
 #endif
 
 static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index dc26a654c496..445e553f4a28 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -18,6 +18,11 @@
 #include <mach/mv78xx0.h>
 #include "common.h"
 
+#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane)   (0xf8 & ~(0x10 << (lane)))
+#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane)  ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane)    (0xf0 & ~(0x10 << (lane)))
+
 struct pcie_port {
 	u8			maj;
 	u8			min;
@@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void)
 	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
-		char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
 
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void)
 		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
 
-		snprintf(winname, sizeof(winname), "pcie%d.%d",
-			 pp->maj, pp->min);
-
-		mvebu_mbus_add_window_remap_flags(winname,
-						  pp->res.start,
-						  resource_size(&pp->res),
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_MEM);
-		mvebu_mbus_add_window_remap_flags(winname,
-						  i * SZ_64K, SZ_64K,
-						  0, MVEBU_MBUS_PCI_IO);
+		mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
+					    MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
+					    pp->res.start, resource_size(&pp->res));
+		mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
+						  MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
+						  i * SZ_64K, SZ_64K, 0);
 	}
 }
 
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9eb63d724602..5e269d7263ce 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_MVEBU
 	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 97cbb8021919..e2acff98e750 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -18,7 +18,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
-#include <linux/time-armada-370-xp.h>
+#include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void)
 	debug_ll_io_init();
 }
 
-/*
- * This initialization will be replaced by a DT-based
- * initialization once the mvebu-mbus driver gains DT support.
- */
-
-#define ARMADA_370_XP_MBUS_WINS_OFFS   0x20000
-#define ARMADA_370_XP_MBUS_WINS_SIZE   0x100
-#define ARMADA_370_XP_SDRAM_WINS_OFFS  0x20180
-#define ARMADA_370_XP_SDRAM_WINS_SIZE  0x20
-
-static void __init armada_370_xp_mbus_init(void)
-{
-	char *mbus_soc_name;
-	struct device_node *dn;
-	const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS);
-	const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS);
-
-	if (of_machine_is_compatible("marvell,armada370"))
-		mbus_soc_name = "marvell,armada370-mbus";
-	else
-		mbus_soc_name = "marvell,armadaxp-mbus";
-
-	dn = of_find_node_by_name(NULL, "internal-regs");
-	BUG_ON(!dn);
-
-	mvebu_mbus_init(mbus_soc_name,
-			of_translate_address(dn, &mbus_wins_offs),
-			ARMADA_370_XP_MBUS_WINS_SIZE,
-			of_translate_address(dn, &sdram_wins_offs),
-			ARMADA_370_XP_SDRAM_WINS_SIZE);
-}
-
 static void __init armada_370_xp_timer_and_clk_init(void)
 {
 	of_clk_init(NULL);
-	armada_370_xp_timer_init();
+	clocksource_of_init();
 	coherency_init();
-	armada_370_xp_mbus_init();
+	BUG_ON(mvebu_mbus_dt_init());
 #ifdef CONFIG_CACHE_L2X0
 	l2x0_of_init(0, ~0UL);
 #endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 4c24303ec481..58adf2fd9cfc 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -140,6 +140,7 @@ int __init coherency_init(void)
 		coherency_base = of_iomap(np, 0);
 		coherency_cpu_base = of_iomap(np, 1);
 		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		of_node_put(np);
 	}
 
 	return 0;
@@ -147,9 +148,14 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	if (of_find_matching_node(NULL, of_coherency_table))
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
 		bus_register_notifier(&platform_bus_type,
 				      &mvebu_hwcc_platform_nb);
+		of_node_put(np);
+	}
 	return 0;
 }
 
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 5476669ba905..ee7598fe75db 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -20,6 +20,8 @@
 #define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
 #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
 
+#include <asm/assembler.h>
+
 	.text
 /*
  * r0: Coherency fabric base register address
@@ -29,6 +31,7 @@ ENTRY(ll_set_cpu_coherent)
 	/* Create bit by cpu index */
 	mov	r3, #(1 << 24)
 	lsl	r1, r3, r1
+ARM_BE8(rev	r1, r1)
 
 	/* Add CPU to SMP group - Atomic */
 	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 8a1b0c96e9ec..3dd80df428f7 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -21,12 +21,16 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * Armada XP specific entry point for secondary CPUs.
  * We add the CPU to the coherency fabric and then jump to secondary
  * startup
  */
 ENTRY(armada_xp_secondary_startup)
+ ARM_BE8(setend	be )			@ go BE8 if entered LE
+
 	/* Get coherency fabric base physical address */
 	adr	r0, 1f
 	ldr	r1, [r0]
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 594b63db4215..ff69c2df298b 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/mbus.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -29,6 +30,9 @@
 #include "pmsu.h"
 #include "coherency.h"
 
+#define AXP_BOOTROM_BASE 0xfff00000
+#define AXP_BOOTROM_SIZE 0x100000
+
 static struct clk *__init get_cpu_clk(int cpu)
 {
 	struct clk *cpu_clk;
@@ -82,37 +86,39 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init armada_xp_smp_init_cpus(void)
 {
-	struct device_node *np;
-	unsigned int i, ncores;
-
-	np = of_find_node_by_name(NULL, "cpus");
-	if (!np)
-		panic("No 'cpus' node found\n");
+	unsigned int ncores = num_possible_cpus();
 
-	ncores = of_get_child_count(np);
 	if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
 		panic("Invalid number of CPUs in DT\n");
 
-	/* Limit possible CPUs to defconfig */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %d CPUs physically present. Only %d configured.",
-			ncores, nr_cpu_ids);
-		pr_warn("Clipping CPU count to %d\n", nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
 	set_smp_cross_call(armada_mpic_send_doorbell);
 }
 
 void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 {
+	struct device_node *node;
+	struct resource res;
+	int err;
+
 	set_secondary_cpus_clock();
 	flush_cache_all();
 	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
-	mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
+
+	/*
+	 * In order to boot the secondary CPUs we need to ensure
+	 * the bootROM is mapped at the correct address.
+	 */
+	node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
+	if (!node)
+		panic("Cannot find 'marvell,bootrom' compatible node");
+
+	err = of_address_to_resource(node, 0, &res);
+	if (err < 0)
+		panic("Cannot get 'bootrom' node address");
+
+	if (res.start != AXP_BOOTROM_BASE ||
+	    resource_size(&res) != AXP_BOOTROM_SIZE)
+		panic("The address for the BootROM is incorrect");
 }
 
 struct smp_operations armada_xp_smp_ops __initdata = {
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 3cc4bef6401c..27fc4f049474 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
 		pr_info("Initializing Power Management Service Unit\n");
 		pmsu_mp_base = of_iomap(np, 0);
 		pmsu_reset_base = of_iomap(np, 1);
+		of_node_put(np);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index f875124ff4f9..5175083cdb34 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
 		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4ce27b536dc9..1dc5acd4fc99 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -61,6 +60,8 @@
 static u32 chipid;
 static u32 socid;
 
+static void __iomem *reset_addr;
+
 static inline void __mxs_setl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_SET_ADDR);
@@ -329,6 +330,11 @@ static void __init crystalfontz_init(void)
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
+static void __init m28cu3_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+}
+
 static const char __init *mxs_get_soc_id(void)
 {
 	struct device_node *np;
@@ -393,12 +399,33 @@ static const char __init *mxs_get_revision(void)
 	u32 rev = mxs_get_cpu_rev();
 
 	if (rev != MXS_CHIP_REV_UNKNOWN)
-		return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf,
+		return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
 				rev & 0xf);
 	else
 		return kasprintf(GFP_KERNEL, "%s", "Unknown");
 }
 
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+
+static int __init mxs_restart_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	reset_addr = of_iomap(np, 0);
+	if (!reset_addr)
+		return -ENODEV;
+
+	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+	else
+		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+	of_node_put(np);
+
+	return 0;
+}
+
 static void __init mxs_machine_init(void)
 {
 	struct device_node *root;
@@ -433,21 +460,20 @@ static void __init mxs_machine_init(void)
 		imx28_evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
-	else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
-		 of_machine_is_compatible("crystalfontz,cfa10049") ||
-		 of_machine_is_compatible("crystalfontz,cfa10055") ||
-		 of_machine_is_compatible("crystalfontz,cfa10057"))
+	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("msr,m28cu3"))
+		m28cu3_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, parent);
 
+	mxs_restart_init();
+
 	if (of_machine_is_compatible("karo,tx28"))
 		tx28_post_init();
 }
 
-#define MX23_CLKCTRL_RESET_OFFSET	0x120
-#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
 
 /*
@@ -455,41 +481,20 @@ static void __init mxs_machine_init(void)
  */
 static void mxs_restart(enum reboot_mode mode, const char *cmd)
 {
-	struct device_node *np;
-	void __iomem *reset_addr;
+	if (reset_addr) {
+		/* reset the chip */
+		__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
-	reset_addr = of_iomap(np, 0);
-	if (!reset_addr)
-		goto soft;
+		pr_err("Failed to assert the chip reset\n");
 
-	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
-		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
-	else
-		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
-
-	/* reset the chip */
-	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
-
-	pr_err("Failed to assert the chip reset\n");
-
-	/* Delay to allow the serial port to show the message */
-	mdelay(50);
+		/* Delay to allow the serial port to show the message */
+		mdelay(50);
+	}
 
-soft:
 	/* We'll take a jump through zero as a poor second */
 	soft_restart(0);
 }
 
-static void __init mxs_timer_init(void)
-{
-	if (of_machine_is_compatible("fsl,imx23"))
-		mx23_clocks_init();
-	else
-		mx28_clocks_init();
-	clocksource_of_init();
-}
-
 static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
 	"fsl,imx23",
@@ -498,7 +503,6 @@ static const char *mxs_dt_compat[] __initdata = {
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index b2494d2db2c4..0170e99fd70f 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
+#include "pm.h"
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 5981c3db9b41..4d42da49753c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK
 	select NOMADIK_8815
 	select I2C
 	select I2C_ALGOBIT
+	select I2C_NOMADIK
 
 endmenu
 endif
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 13e0df9c11ce..cce2c9dfb5d1 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,15 +25,11 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_data/clk-nomadik.h>
-#include <linux/clocksource.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/fsmc.h>
 #include <linux/gpio.h>
-#include <linux/amba/mmci.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -113,50 +109,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd)
 	writel(1, srcbase + 0x18);
 }
 
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-static void __init cpu8815_timer_init_of(void)
-{
-	struct device_node *mtu;
-	void __iomem *base;
-	int irq;
-	u32 src_cr;
-
-	/* We need this to be up now */
-	nomadik_clk_init();
-
-	mtu = of_find_node_by_path("/mtu@101e2000");
-	if (!mtu)
-		return;
-	base = of_iomap(mtu, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(mtu, 0);
-
-	pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(base);
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, base);
-
-	clocksource_of_init();
-}
-
-static struct fsmc_nand_timings cpu8815_nand_timings = {
-	.thiz	= 0,
-	.thold	= 0x10,
-	.twait	= 0x0A,
-	.tset	= 0,
-};
-
-static struct fsmc_nand_platform_data cpu8815_nand_data = {
-	.nand_timings = &cpu8815_nand_timings,
-};
-
 /*
  * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
  * to simply request an IRQ passed as a resource. So the GPIO pin needs
@@ -190,15 +142,6 @@ static int __init cpu8815_eth_init(void)
 device_initcall(cpu8815_eth_init);
 
 /*
- * TODO:
- * cannot be set from device tree, convert to a proper DT
- * binding.
- */
-static struct mmci_platform_data mmcsd_plat_data = {
-	.ocr_mask = MMC_VDD_29_30,
-};
-
-/*
  * This GPIO pin turns on a line that is used to detect card insertion
  * on this board.
  */
@@ -232,24 +175,13 @@ static int __init cpu8815_mmcsd_init(void)
 }
 device_initcall(cpu8815_mmcsd_init);
 
-
-/* These are mostly to get the right device names for the clock lookups */
-static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
-		NULL, &cpu8815_nand_data),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
-		NULL, &mmcsd_plat_data),
-	{ /* sentinel */ },
-};
-
 static void __init cpu8815_init_of(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	/* At full speed latency must be >=2, so 0x249 in low bits */
 	l2x0_of_init(0x00730249, 0xfe000fff);
 #endif
-	of_platform_populate(NULL, of_default_bus_match_table,
-			cpu8815_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * cpu8815_board_compat[] = {
@@ -259,7 +191,6 @@ static const char * cpu8815_board_compat[] = {
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
 	.map_io		= cpu8815_map_io,
-	.init_time	= cpu8815_timer_init_of,
 	.init_machine	= cpu8815_init_of,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 99e26092a9f7..4b2ed2e8352f 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -14,11 +14,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-vic.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -65,12 +63,6 @@ static void __init nspire_init(void)
 			nspire_auxdata, NULL);
 }
 
-static void __init nspire_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void nspire_restart(char mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -83,7 +75,6 @@ static void nspire_restart(char mode, const char *cmd)
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
 	.map_io		= nspire_map_io,
-	.init_time	= nspire_init_time,
 	.init_machine	= nspire_init,
 	.restart	= nspire_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index abec019a5281..732f8ee2fcd2 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -46,6 +46,9 @@ static inline void omap7xx_map_io(void)
 void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
+static inline void omap1510_fpga_init_irq(void)
+{
+}
 static inline void omap15xx_map_io(void)
 {
 }
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 8bd71b2d0967..3c0e42219200 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = {
  * mask_ack routine for all of the FPGA interrupts has been changed from
  * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
  * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ * interrupt is run with all interrupts masked.
  *
  * Limited testing indicates that this workaround appears to be effective
  * for the smc9194 Ethernet driver used on the Innovator.  It should work
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 02b3eb2e201c..312a0924d786 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -25,7 +25,7 @@
 #define OMAP1510_GPIO_BASE		0xFFFCE000
 
 /* gpio1 */
-static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+static struct resource omap15xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -48,7 +48,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -66,7 +66,7 @@ static struct platform_device omap15xx_mpu_gpio = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap15xx_gpio_resources[] = {
+static struct resource omap15xx_gpio_resources[] = {
 	{
 		.start	= OMAP1510_GPIO_BASE,
 		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
@@ -90,7 +90,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index b9952a258d82..6e6ec93dcbb3 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -31,7 +31,7 @@
 #define SYSCONFIG_WORD			0x14
 
 /* mpu gpio */
-static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+static struct resource omap16xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -54,7 +54,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -72,7 +72,7 @@ static struct platform_device omap16xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap16xx_gpio1_resources[] = {
+static struct resource omap16xx_gpio1_resources[] = {
 	{
 		.start	= OMAP1610_GPIO1_BASE,
 		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
@@ -100,7 +100,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+static struct omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -116,7 +116,7 @@ static struct platform_device omap16xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap16xx_gpio2_resources[] = {
+static struct resource omap16xx_gpio2_resources[] = {
 	{
 		.start	= OMAP1610_GPIO2_BASE,
 		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
@@ -128,7 +128,7 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+static struct omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -144,7 +144,7 @@ static struct platform_device omap16xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap16xx_gpio3_resources[] = {
+static struct resource omap16xx_gpio3_resources[] = {
 	{
 		.start	= OMAP1610_GPIO3_BASE,
 		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
@@ -156,7 +156,7 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+static struct omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -172,7 +172,7 @@ static struct platform_device omap16xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap16xx_gpio4_resources[] = {
+static struct resource omap16xx_gpio4_resources[] = {
 	{
 		.start	= OMAP1610_GPIO4_BASE,
 		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
@@ -184,7 +184,7 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+static struct omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -199,7 +199,7 @@ static struct platform_device omap16xx_gpio4 = {
 	.resource = omap16xx_gpio4_resources,
 };
 
-static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+static struct platform_device *omap16xx_gpio_dev[] __initdata = {
 	&omap16xx_mpu_gpio,
 	&omap16xx_gpio1,
 	&omap16xx_gpio2,
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index f5819b2b7cbe..4612d2506a2d 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -30,7 +30,7 @@
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /* mpu gpio */
-static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+static struct resource omap7xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -53,7 +53,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -71,7 +71,7 @@ static struct platform_device omap7xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap7xx_gpio1_resources[] = {
+static struct resource omap7xx_gpio1_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO1_BASE,
 		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
@@ -94,7 +94,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+static struct omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -110,7 +110,7 @@ static struct platform_device omap7xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap7xx_gpio2_resources[] = {
+static struct resource omap7xx_gpio2_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO2_BASE,
 		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
@@ -122,7 +122,7 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+static struct omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -138,7 +138,7 @@ static struct platform_device omap7xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap7xx_gpio3_resources[] = {
+static struct resource omap7xx_gpio3_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO3_BASE,
 		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
@@ -150,7 +150,7 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+static struct omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -166,7 +166,7 @@ static struct platform_device omap7xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap7xx_gpio4_resources[] = {
+static struct resource omap7xx_gpio4_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO4_BASE,
 		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
@@ -178,7 +178,7 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+static struct omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -194,7 +194,7 @@ static struct platform_device omap7xx_gpio4 = {
 };
 
 /* gpio5 */
-static struct __initdata resource omap7xx_gpio5_resources[] = {
+static struct resource omap7xx_gpio5_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO5_BASE,
 		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
@@ -206,7 +206,7 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+static struct omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -222,7 +222,7 @@ static struct platform_device omap7xx_gpio5 = {
 };
 
 /* gpio6 */
-static struct __initdata resource omap7xx_gpio6_resources[] = {
+static struct resource omap7xx_gpio6_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO6_BASE,
 		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
@@ -234,7 +234,7 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+static struct omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -249,7 +249,7 @@ static struct platform_device omap7xx_gpio6 = {
 	.resource = omap7xx_gpio6_resources,
 };
 
-static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+static struct platform_device *omap7xx_gpio_dev[] __initdata = {
 	&omap7xx_mpu_gpio,
 	&omap7xx_gpio1,
 	&omap7xx_gpio2,
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
index 6cf9c1cc2bef..612bd1cc257c 100644
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -195,6 +195,7 @@ IS_OMAP_TYPE(1710, 0x1710)
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap44xx()		0
 #define soc_is_omap54xx()		0
+#define soc_is_dra7xx()			0
 #define soc_is_am33xx()			0
 #define cpu_class_is_omap1()		1
 #define cpu_class_is_omap2()		0
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 358b82cb9f78..40a1ae319610 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -628,7 +628,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 
 static struct irqaction omap_wakeup_irq = {
 	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
 	.handler	= omap_wakeup_interrupt
 };
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 80603d2fef77..6b5f298d6638 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -160,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_mpu_timer1_irq = {
 	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_mpu_timer1_interrupt,
 };
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0b74246ba62c..107e7ab3edba 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -156,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_32k_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3eed0006d189..dc21df166161 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,7 +8,6 @@ config ARCH_OMAP2
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -22,7 +21,6 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
@@ -37,16 +35,14 @@ config ARCH_OMAP4
 	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select COMMON_CLK
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 
@@ -60,18 +56,16 @@ config SOC_OMAP5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
-	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
 
 config SOC_AM33XX
-	bool "AM33XX support"
+	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
 
 config SOC_AM43XX
 	bool "TI AM43x"
@@ -80,7 +74,6 @@ config SOC_AM43XX
 	select ARCH_OMAP2PLUS
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
-	select COMMON_CLK
 	select MACH_OMAP_GENERIC
 
 config ARCH_OMAP2PLUS
@@ -90,11 +83,11 @@ config ARCH_OMAP2PLUS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
+	select MACH_OMAP_GENERIC
 	select OMAP_DM_TIMER
 	select PINCTRL
 	select PROC_DEVICETREE if PROC_FS
@@ -118,7 +111,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select I2C
 	select I2C_OMAP
 	select MENELAUS if ARCH_OMAP2
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select NEON if CPU_V7
 	select PM_RUNTIME
 	select REGULATOR
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -132,9 +125,17 @@ config SOC_HAS_OMAP2_SDRC
 
 config SOC_HAS_REALTIME_COUNTER
 	bool "Real time free running counter"
-	depends on SOC_OMAP5
+	depends on SOC_OMAP5 || SOC_DRA7XX
 	default y
 
+config SOC_DRA7XX
+	bool "TI DRA7XX"
+	select ARM_ARCH_TIMER
+	select CPU_V7
+	select ARM_GIC
+	select HAVE_SMP
+	select COMMON_CLK
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
@@ -180,16 +181,11 @@ config OMAP_PACKAGE_CUS
 config OMAP_PACKAGE_CBP
        bool
 
-comment "OMAP Board Type"
+comment "OMAP Legacy Platform Data Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP2+ board"
-	depends on ARCH_OMAP2PLUS
-	default y
-	help
-	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
-	  More information at Documentation/devicetree
+	bool
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -253,12 +249,6 @@ config MACH_OVERO
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3EVM
-	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -307,33 +297,12 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC
 
-config MACH_NOKIA_RM680
-	bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_NOKIA_RM696
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_RX51
 	bool "Nokia N900 (RX-51) phone"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_ZOOM2
-	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP_ZOOM3
-	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
 	depends on ARCH_OMAP3
@@ -350,31 +319,12 @@ config MACH_CM_T3517
 config MACH_CM_T3730
        bool
 
-config MACH_IGEP0020
-	bool "IGEP v2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_IGEP0030
-	bool "IGEP OMAP3 module"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_IGEP0020
-	select OMAP_PACKAGE_CBB
-
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_OMAP_3630SDP
-	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
 	depends on SOC_TI81XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d4f671547c37..e15ac005ef17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -8,7 +8,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o sram.o
+	 omap_device.o sram.o drm.o
 
 omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
@@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
 obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
@@ -39,6 +40,7 @@ omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -61,6 +63,7 @@ obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap4-restart.o
 
 # Pin multiplexing
 obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
@@ -87,6 +90,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
@@ -108,12 +112,13 @@ obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
-obj-$(CONFIG_SOC_AM43XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -141,8 +146,11 @@ obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= powerdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= powerdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= powerdomains7xx_data.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
@@ -158,8 +166,11 @@ obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= clockdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= clockdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= clockdomains7xx_data.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -201,8 +212,14 @@ obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_43xx_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
@@ -218,12 +235,8 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
-ifneq ($(CONFIG_DRM_OMAP),)
-obj-y					+= drm.o
-endif
-
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
@@ -232,26 +245,14 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index 1eae96212315..c88d8df753c2 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* TODO: Handle mode and cmd if necessary */
 
-	am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK,
-				AM33XX_GLOBAL_WARM_SW_RST_MASK,
+	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_RST_GLOBAL_WARM_SW_MASK,
 				AM33XX_PRM_DEVICE_MOD,
 				AM33XX_PRM_RSTCTRL_OFFSET);
 
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100644
index 20d6d8189240..000000000000
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "gpmc-smc91x.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs             = 3,
-	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	board_smc91x_data.gpio_irq = 158;
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 126,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = 61,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-/*
- * SDP3630 CS organization
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_sdp_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	zoom_peripherals_init();
-	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-	zoom_display_init();
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
-	enable_board_wakeup_source();
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_sdp_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index fc53911d0d13..0d499a1878f6 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void)
 
 static void __init am3517_crane_init(void)
 {
-	int ret;
-
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 8cc2c9e9fb03..543d9a882de3 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -21,7 +21,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fc20a61f6b2a..ac82512b9c8c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
+	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index be5d005ebad2..19f1652e94cf 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,13 +15,10 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "common-board-devices.h"
-#include "dss-common.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
 #define intc_of_init	NULL
@@ -36,40 +33,9 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ }
 };
 
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init legacy_init_ehci_clk(char *clkname)
-{
-	int ret;
-
-	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
-	if (ret) {
-		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
-						__func__, clkname, ret);
-	}
-}
-
 static void __init omap_generic_init(void)
 {
-	omap_sdrc_init(NULL, NULL);
-
-	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
-
-	/*
-	 * HACK: call display setup code for selected boards to enable omapdss.
-	 * This will be removed when omapdss supports DT.
-	 */
-	if (of_machine_is_compatible("ti,omap4-panda")) {
-		omap4_panda_display_init_of();
-		legacy_init_ehci_clk("auxclk3_ck");
-
-	}
-	else if (of_machine_is_compatible("ti,omap4-sdp"))
-		omap_4430sdp_display_init_of();
-	else if (of_machine_is_compatible("ti,omap5-uevm"))
-		legacy_init_ehci_clk("auxclk1_ck");
+	pdata_quirks_init(omap_dt_match_table);
 }
 
 #ifdef CONFIG_SOC_OMAP2420
@@ -129,6 +95,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
+static const char *omap36xx_boards_compat[] __initdata = {
+	"ti,omap36xx",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= omap36xx_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
 static const char *omap3_gp_boards_compat[] __initdata = {
 	"ti,omap3-beagle",
 	"timll,omap3-devkit8000",
@@ -162,6 +146,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= am33xx_init_late,
 	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
@@ -201,6 +186,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap5_init_late,
 	.init_time	= omap5_realtime_timer_init,
 	.dt_compat	= omap5_boards_compat,
 	.restart	= omap44xx_restart,
@@ -216,9 +202,30 @@ static const char *am43_boards_compat[] __initdata = {
 DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.map_io		= am33xx_map_io,
 	.init_early	= am43xx_init_early,
+	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
 	.init_time	= omap3_sync32k_timer_init,
 	.dt_compat	= am43_boards_compat,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static const char *dra7xx_boards_compat[] __initdata = {
+	"ti,dra7",
+	NULL,
+};
+
+DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
+	.map_io		= omap5_map_io,
+	.init_early	= dra7xx_init_early,
+	.init_late	= dra7xx_init_late,
+	.init_irq	= omap_gic_of_init,
+	.init_machine	= omap_generic_init,
+	.init_time	= omap5_realtime_timer_init,
+	.dt_compat	= dra7xx_boards_compat,
+	.restart	= omap44xx_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
deleted file mode 100644
index 06dbb2d3d38b..000000000000
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/*
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-numonyx-m65kxxxxam.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-#include "control.h"
-#include "gpmc-onenand.h"
-
-#define IGEP2_SMSC911X_CS       5
-#define IGEP2_SMSC911X_GPIO     176
-#define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_GREEN   26
-#define IGEP2_GPIO_LED0_RED     27
-#define IGEP2_GPIO_LED1_RED     28
-#define IGEP2_GPIO_DVI_PUP      170
-
-#define IGEP2_RB_GPIO_WIFI_NPD     94
-#define IGEP2_RB_GPIO_WIFI_NRESET  95
-#define IGEP2_RB_GPIO_BT_NRESET    137
-#define IGEP2_RC_GPIO_WIFI_NPD     138
-#define IGEP2_RC_GPIO_WIFI_NRESET  139
-#define IGEP2_RC_GPIO_BT_NRESET    137
-
-#define IGEP3_GPIO_LED0_GREEN	54
-#define IGEP3_GPIO_LED0_RED	53
-#define IGEP3_GPIO_LED1_RED	16
-#define IGEP3_GPIO_USBH_NRESET  183
-
-#define IGEP_SYSBOOT_MASK           0x1f
-#define IGEP_SYSBOOT_NAND           0x0f
-#define IGEP_SYSBOOT_ONENAND        0x10
-
-/*
- * IGEP2 Hardware Revision Table
- *
- *  --------------------------------------------------------------------------
- * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
- *  --------------------------------------------------------------------------
- * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
- * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
- * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
- *  --------------------------------------------------------------------------
- */
-
-#define IGEP2_BOARD_HWREV_B	0
-#define IGEP2_BOARD_HWREV_C	1
-#define IGEP3_BOARD_HWREV	2
-
-static u8 hwrev;
-
-static void __init igep2_get_revision(void)
-{
-	u8 ret;
-
-	if (machine_is_igep0030()) {
-		hwrev = IGEP3_BOARD_HWREV;
-		return;
-	}
-
-	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
-
-	if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
-		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		return;
-	}
-
-	ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
-	if (ret == 0) {
-		pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_C;
-	} else if (ret ==  1) {
-		pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_B;
-	} else {
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		hwrev = -1;
-	}
-
-	gpio_free(IGEP2_GPIO_LED1_RED);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
-	defined(CONFIG_MTD_NAND_OMAP2) ||		\
-	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-#define ONENAND_MAP             0x20000000
-
-/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
- * Since the device is equipped with two DataRAMs, and two-plane NAND
- * Flash memory array, these two component enables simultaneous program
- * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
- * while Plane2 has only odd blocks such as block1, block3, block5.
- * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
- */
-
-static struct mtd_partition igep_flash_partitions[] = {
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 2 * (64*(2*2048))
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 6 * (64*(2*2048)),
-	},
-	{
-		.name           = "Environment",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2 * (64*(2*2048)),
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 12 * (64*(2*2048)),
-	},
-	{
-		.name           = "File System",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static inline u32 igep_get_sysboot_value(void)
-{
-	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
-}
-
-static void __init igep_flash_init(void)
-{
-	u32 mux;
-	mux = igep_get_sysboot_value();
-
-	if (mux == IGEP_SYSBOOT_NAND) {
-		pr_info("IGEP: initializing NAND memory device\n");
-		board_nand_init(igep_flash_partitions,
-				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16, nand_default_timings);
-	} else if (mux == IGEP_SYSBOOT_ONENAND) {
-		pr_info("IGEP: initializing OneNAND memory device\n");
-		board_onenand_init(igep_flash_partitions,
-				   ARRAY_SIZE(igep_flash_partitions), 0);
-	} else {
-		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
-	}
-}
-
-#else
-static void __init igep_flash_init(void) {}
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = IGEP2_SMSC911X_CS,
-	.gpio_irq       = IGEP2_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init igep2_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init igep2_init_smsc911x(void) { }
-#endif
-
-static struct regulator_consumer_supply igep_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
-	.consumer_supplies      = igep_vmmc1_supply,
-};
-
-static struct regulator_consumer_supply igep_vio_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= 1,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
-	.consumer_supplies      = igep_vio_supply,
-};
-
-static struct regulator_consumer_supply igep_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vmmc2 = {
-	.constraints		= {
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.always_on		= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
-	.consumer_supplies	= igep_vmmc2_supply,
-};
-
-static struct fixed_voltage_config igep_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.enabled_at_boot	= 1,
-	.init_data		= &igep_vmmc2,
-};
-
-static struct platform_device igep_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &igep_vwlan,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-#endif
-	{}      /* Terminator */
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep_gpio_leds[] = {
-	[0] = {
-		.name			= "omap3:red:user0",
-		.default_state		= 0,
-	},
-	[1] = {
-		.name			= "omap3:green:boot",
-		.default_state		= 1,
-	},
-	[2] = {
-		.name			= "omap3:red:user1",
-		.default_state		= 0,
-	},
-	[3] = {
-		.name			= "omap3:green:user1",
-		.default_state		= 0,
-		.gpio			= -EINVAL, /* gets replaced */
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data igep_led_pdata = {
-	.leds           = igep_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep_gpio_leds),
-};
-
-static struct platform_device igep_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep_led_pdata,
-	},
-};
-
-static void __init igep_leds_init(void)
-{
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	platform_device_register(&igep_led_device);
-}
-
-#else
-static struct gpio igep_gpio_leds[] __initdata = {
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d0"   },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d1"   },
-};
-
-static inline void igep_leds_init(void)
-{
-	int i;
-
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
-		pr_warning("IGEP v2: Could not obtain leds gpios\n");
-		return;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
-		gpio_export(igep_gpio_leds[i].gpio, 0);
-}
-#endif
-
-static struct gpio igep2_twl_gpios[] = {
-	{ -EINVAL, GPIOF_IN,		"GPIO_EHCI_NOC"  },
-	{ -EINVAL, GPIOF_OUT_INIT_LOW,	"GPIO_USBH_CPEN" },
-};
-
-static int igep_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
-			       "gpio-led:green:d1");
-	if (ret == 0)
-		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-	else
-		pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
-#else
-	igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	if (machine_is_igep0030())
-		return 0;
-
-	/*
-	 * REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-	igep2_twl_gpios[0].gpio = gpio + 1;
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
-	igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
-
-	ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
-	if (ret < 0)
-		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
-
-	return 0;
-};
-
-static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.use_leds	= true,
-	.setup		= igep_twl_gpio_setup,
-};
-
-static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device omap3stalker_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = IGEP2_GPIO_DVI_PUP,
-};
-
-static struct platform_device omap3stalker_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3stalker_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.default_display_name = "dvi",
-};
-
-static struct platform_device *igep_devices[] __initdata = {
-	&igep_vwlan_device,
-	&omap3stalker_tfp410_device,
-	&omap3stalker_dvi_connector_device,
-};
-
-static int igep2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data igep2_keymap_data = {
-	.keymap			= igep2_keymap,
-	.keymap_size		= ARRAY_SIZE(igep2_keymap),
-};
-
-static struct twl4030_keypad_data igep2_keypad_pdata = {
-	.keymap_data	= &igep2_keymap_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-static struct twl4030_platform_data igep_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &igep_twl4030_gpio_pdata,
-	.vmmc1          = &igep_vmmc1,
-	.vio		= &igep_vio,
-};
-
-static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("eeprom", 0x50),
-	},
-};
-
-static void __init igep_i2c_init(void)
-{
-	int ret;
-
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
-			      TWL_COMMON_REGULATOR_VPLL2);
-	igep_twldata.vpll2->constraints.apply_uV = true;
-	igep_twldata.vpll2->constraints.name = "VDVI";
-
-	if (machine_is_igep0020()) {
-		/*
-		 * Bus 3 is attached to the DVI port where devices like the
-		 * pico DLP projector don't work reliably with 400kHz
-		 */
-		ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
-					    ARRAY_SIZE(igep2_i2c3_boardinfo));
-		if (ret)
-			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-
-		igep_twldata.keypad	= &igep2_keypad_pdata;
-		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
-	}
-
-	omap3_pmic_init("twl4030", &igep_twldata);
-}
-
-static struct usbhs_phy_data igep2_phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_phy_data igep3_phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* Display Sub System */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
-	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
-	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-static struct gpio igep_wlan_bt_gpios[] __initdata = {
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD"	   },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET"   },
-};
-
-static void __init igep_wlan_bt_init(void)
-{
-	int err;
-
-	/* GPIO's for WLAN-BT combo depends on hardware revision */
-	if (hwrev == IGEP2_BOARD_HWREV_B) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
-	} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
-	} else
-		return;
-
-	/* Make sure that the GPIO pins are muxed correctly */
-	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
-
-	err = gpio_request_array(igep_wlan_bt_gpios,
-				 ARRAY_SIZE(igep_wlan_bt_gpios));
-	if (err) {
-		pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
-		return;
-	}
-
-	gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
-
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
-
-}
-#else
-static inline void __init igep_wlan_bt_init(void) { }
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init igep_init(void)
-{
-	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	/* Get IGEP2 hardware revision */
-	igep2_get_revision();
-
-	omap_hsmmc_init(mmc);
-
-	/* Register I2C busses and drivers */
-	igep_i2c_init();
-	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
-	omap_serial_init();
-	omap_sdrc_init(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	igep_flash_init();
-	igep_leds_init();
-	omap_twl4030_audio_init("igep2", NULL);
-
-	/*
-	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
-	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
-	 */
-	igep_wlan_bt_init();
-
-	if (machine_is_igep0020()) {
-		omap_display_init(&igep2_dss_data);
-		igep2_init_smsc911x();
-		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
-		usbhs_init(&igep2_usbhs_bdata);
-	} else {
-		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
-		usbhs_init(&igep3_usbhs_bdata);
-	}
-}
-
-MACHINE_START(IGEP0020, "IGEP v2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index dd8da2c5399f..4ec8d82b0492 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -36,7 +36,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include "board-zoom.h"
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
@@ -406,7 +405,7 @@ static void __init omap_ldp_init(void)
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			ZOOM_NAND_CS, 0, nand_default_timings);
+			0, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f26918467efc..a516c1bda141 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -25,7 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>
@@ -289,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
 
 static struct gpio_led gpio_leds[];
 
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
-	.needs_vcc = true,
-};
-
 static struct usbhs_phy_data phy_data[] = {
 	{
 		.port = 2,
 		.reset_gpio = 147,
 		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
 		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-		.platform_data = &hsusb2_phy_data,
 	},
 };
 
@@ -522,11 +516,11 @@ static int __init beagle_opp_init(void)
 			return -ENODEV;
 		}
 		/* Enable MPU 1GHz and lower opps */
-		r = opp_enable(mpu_dev, 800000000);
+		r = dev_pm_opp_enable(mpu_dev, 800000000);
 		/* TODO: MPU 1GHz needs SR and ABB */
 
 		/* Enable IVA 800MHz and lower opps */
-		r |= opp_enable(iva_dev, 660000000);
+		r |= dev_pm_opp_enable(iva_dev, 660000000);
 		/* TODO: DSP 800MHz needs SR and ABB */
 		if (r) {
 			pr_err("%s: failed to enable higher opp %d\n",
@@ -535,8 +529,8 @@ static int __init beagle_opp_init(void)
 			 * Cleanup - disable the higher freqs - we dont care
 			 * about the results
 			 */
-			opp_disable(mpu_dev, 800000000);
-			opp_disable(iva_dev, 660000000);
+			dev_pm_opp_disable(mpu_dev, 800000000);
+			dev_pm_opp_disable(iva_dev, 660000000);
 		}
 	}
 	return 0;
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
deleted file mode 100644
index 18143873346c..000000000000
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/leds.h>
-#include <linux/interrupt.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
-#include <linux/smsc911x.h>
-
-#include <linux/wl12xx.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include "common.h"
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-
-#define	NAND_CS			0
-
-#define OMAP3_EVM_TS_GPIO	175
-#define OMAP3_EVM_EHCI_VBUS	22
-#define OMAP3_EVM_EHCI_SELECT	61
-
-#define OMAP3EVM_ETHR_START	0x2c000000
-#define OMAP3EVM_ETHR_SIZE	1024
-#define OMAP3EVM_ETHR_ID_REV	0x50
-#define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMSC911X_CS	5
-/*
- * Eth Reset signal
- *	64 = Generation 1 (<=RevD)
- *	7 = Generation 2 (>=RevE)
- */
-#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
-#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-static u8 omap3_evm_version;
-
-static u8 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-
-static void __init omap3_evm_get_revision(void)
-{
-	void __iomem *ioaddr;
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
-	if (!ioaddr)
-		return;
-	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
-	iounmap(ioaddr);
-
-	switch (smsc_id) {
-	/*SMSC9115 chipset*/
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/*SMSC 9220 chipset*/
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-	}
-}
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3EVM_SMSC911X_CS,
-	.gpio_irq       = OMAP3EVM_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init omap3evm_init_smsc911x(void)
-{
-	/* Configure ethernet controller reset gpio */
-	if (cpu_is_omap3430()) {
-		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
-		else
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
-	}
-
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3evm_init_smsc911x(void) { return; }
-#endif
-
-/*
- * OMAP3EVM LCD Panel control signals
- */
-#define OMAP3EVM_LCD_PANEL_LR		2
-#define OMAP3EVM_LCD_PANEL_UD		3
-#define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_QVGA		154
-#define OMAP3EVM_LCD_PANEL_RESB		155
-
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
-#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
-
-/*
- * OMAP3EVM DVI control signals
- */
-#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
-
-#ifdef CONFIG_BROKEN
-static void __init omap3_evm_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
-				"lcd_panel_envdd");
-	if (r)
-		pr_err("failed to get lcd_panel_envdd GPIO\n");
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
-				GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
-	if (r)
-		pr_err("failed to get lcd_panel_bklight GPIO\n");
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-}
-#endif
-
-static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.resb_gpio		= OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio		= OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio		= OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio		= OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio		= OMAP3EVM_LCD_PANEL_UD,
-};
-
-static struct platform_device omap3_evm_lcd_device = {
-	.name                   = "panel-sharp-ls037v7dw01",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device omap3_evm_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = OMAP3EVM_DVI_PANEL_EN_GPIO,
-};
-
-static struct platform_device omap3_evm_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data omap3_evm_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device omap3_evm_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tv_pdata,
-};
-
-static struct omap_dss_board_info omap3_evm_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= omap3evm_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 63,
-		.deferred	= true,
-	},
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	{
-		.name		= "wl1271",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-#endif
-	{}	/* Terminator */
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "omap3evm::ledb",
-		/* normally not visible (board underside) */
-		.default_trigger	= "default-on",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-
-static int omap3evm_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r, lcd_bl_en;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
-		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
-	if (r)
-		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	platform_device_register(&leds_gpio);
-
-	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
-	 * for starting USB tranceiver
-	 */
-#ifdef CONFIG_TWL4030_CORE
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		u8 val;
-
-		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
-		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
-		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
-	}
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.use_leds	= true,
-	.setup		= omap3evm_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3evm_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VIO for ads7846 */
-static struct regulator_init_data omap3evm_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= omap3evm_vio_supply,
-};
-
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-
-#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
-#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-
-static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* VMMC2 for driving the WL12xx module */
-static struct regulator_init_data omap3evm_vmmc2 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies	= omap3evm_vmmc2_supply,
-};
-
-static struct fixed_voltage_config omap3evm_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.80V */
-	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &omap3evm_vmmc2,
-};
-
-static struct platform_device omap3evm_wlan_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &omap3evm_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-#endif
-
-/* VAUX2 for USB */
-static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
-	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
-	REGULATOR_SUPPLY("vaux2", NULL),
-};
-
-static struct regulator_init_data omap3evm_vaux2 = {
-	.constraints = {
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
-	.consumer_supplies		= omap3evm_vaux2_supplies,
-};
-
-static struct twl4030_platform_data omap3evm_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3evm_kp_data,
-	.gpio		= &omap3evm_gpio_data,
-	.vio		= &omap3evm_vio,
-	.vmmc1		= &omap3evm_vmmc1,
-	.vsim		= &omap3evm_vsim,
-};
-
-static int __init omap3_evm_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3evm_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3evm_twldata.vdac->constraints.apply_uV = true;
-	omap3evm_twldata.vpll2->constraints.apply_uV = true;
-
-	omap3_pmic_init("twl4030", &omap3evm_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = -1,	/* set at runtime */
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux omap35x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_board_mux omap36x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap35x_board_mux	NULL
-#define omap36x_board_mux	NULL
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct gpio omap3_evm_ehci_gpios[] __initdata = {
-	{ OMAP3_EVM_EHCI_VBUS,	 GPIOF_OUT_INIT_HIGH,  "enable EHCI VBUS" },
-	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
-};
-
-static void __init omap3_evm_wl12xx_init(void)
-{
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	int ret;
-
-	/* WL12xx WLAN Init */
-	omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap3evm_wlan_regulator);
-	if (ret)
-		pr_err("error registering wl12xx device: %d\n", ret);
-#endif
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct mtd_partition omap3evm_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 4*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 14*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot Env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2*(SZ_128K)
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 40*(SZ_128K)
-	},
-	{
-		.name           = "File system",
-		.size           = MTDPART_SIZ_FULL,
-		.offset         = MTDPART_OFS_APPEND,
-	},
-};
-
-static void __init omap3_evm_init(void)
-{
-	struct omap_board_mux *obm;
-
-	omap3_evm_get_revision();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
-	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
-
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
-
-	omap3_evm_i2c_init();
-
-	omap_display_init(&omap3_evm_dss_data);
-	platform_device_register(&omap3_evm_lcd_device);
-	platform_device_register(&omap3_evm_tfp410_device);
-	platform_device_register(&omap3_evm_dvi_connector_device);
-	platform_device_register(&omap3_evm_tv_connector_device);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-
-	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
-	usb_nop_xceiv_register();
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		/* enable EHCI VBUS using GPIO22 */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
-		/* Select EHCI port on main board */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
-				   OMAP_PIN_INPUT_PULLUP);
-		gpio_request_array(omap3_evm_ehci_gpios,
-				   ARRAY_SIZE(omap3_evm_ehci_gpios));
-
-		/* setup EHCI phy reset config */
-		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		phy_data[0].reset_gpio = 21;
-
-		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
-		musb_board_data.power = 500;
-		musb_board_data.extvbus = 1;
-	} else {
-		/* setup EHCI phy reset on MDC */
-		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		phy_data[0].reset_gpio = 135;
-	}
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	board_nand_init(omap3evm_nand_partitions,
-			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
-			NAND_BUSWIDTH_16, NULL);
-
-	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
-	omap3evm_init_smsc911x();
-#ifdef CONFIG_BROKEN
-	omap3_evm_display_init();
-#endif
-	omap3_evm_wl12xx_init();
-	omap_twl4030_audio_init("omap3evm", NULL);
-}
-
-MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_evm_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
deleted file mode 100644
index 345e8c4b8731..000000000000
--- a/arch/arm/mach-omap2/board-rm680.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Board support file for Nokia N950 (RM-680) / N9 (RM-696).
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c/twl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "sdram-nokia.h"
-#include "common-board-devices.h"
-#include "gpmc-onenand.h"
-
-static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* Fixed regulator for internal eMMC */
-static struct regulator_init_data rm680_vemmc = {
-	.constraints =	{
-		.name			= "rm680_vemmc",
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
-					| REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
-	.consumer_supplies		= rm680_vemmc_consumers,
-};
-
-static struct fixed_voltage_config rm680_vemmc_config = {
-	.supply_name		= "VEMMC",
-	.microvolts		= 2900000,
-	.gpio			= 157,
-	.startup_delay		= 150,
-	.enable_high		= 1,
-	.init_data		= &rm680_vemmc,
-};
-
-static struct platform_device rm680_vemmc_device = {
-	.name			= "reg-fixed-voltage",
-	.dev			= {
-		.platform_data	= &rm680_vemmc_config,
-	},
-};
-
-static struct platform_device *rm680_peripherals_devices[] __initdata = {
-	&rm680_vemmc_device,
-};
-
-/* TWL */
-static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.pullups		= BIT(0),
-	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
-};
-
-static struct twl4030_platform_data rm680_twl_data = {
-	.gpio			= &rm680_gpio_data,
-	/* add rest of the children here */
-};
-
-static void __init rm680_i2c_init(void)
-{
-	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.gpio_irq	= 65,
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-/* eMMC */
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{ /* Terminator */ }
-};
-
-static void __init rm680_peripherals_init(void)
-{
-	platform_add_devices(rm680_peripherals_devices,
-				ARRAY_SIZE(rm680_peripherals_devices));
-	rm680_i2c_init();
-	gpmc_onenand_init(board_onenand_data);
-	omap_hsmmc_init(mmc);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init rm680_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	rm680_peripherals_init();
-}
-
-MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c3270c0f1fce..f093af17f5e6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -57,6 +57,8 @@
 #include "common-board-devices.h"
 #include "gpmc.h"
 #include "gpmc-onenand.h"
+#include "soc.h"
+#include "omap-secure.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -167,64 +169,55 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 		.name		= "lp5523:kb1",
 		.chan_nr	= 0,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb2",
 		.chan_nr	= 1,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb3",
 		.chan_nr	= 2,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb4",
 		.chan_nr	= 3,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:b",
 		.chan_nr	= 4,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:g",
 		.chan_nr	= 5,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:r",
 		.chan_nr	= 6,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb5",
 		.chan_nr	= 7,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb6",
 		.chan_nr	= 8,
 		.led_current	= 50,
+		.max_current	= 100,
 	}
 };
 
-static int rx51_lp5523_setup(void)
-{
-	return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
-			"lp5523_enable");
-}
-
-static void rx51_lp5523_release(void)
-{
-	gpio_free(RX51_LP5523_CHIP_EN_GPIO);
-}
-
-static void rx51_lp5523_enable(bool state)
-{
-	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
-}
-
 static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 	.led_config		= rx51_lp5523_led_config,
 	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
 	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.setup_resources	= rx51_lp5523_setup,
-	.release_resources	= rx51_lp5523_release,
-	.enable			= rx51_lp5523_enable,
+	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
 };
 #endif
 
@@ -1289,6 +1282,22 @@ static void __init rx51_init_twl4030_hwmon(void)
 	platform_device_register(&madc_hwmon);
 }
 
+static struct platform_device omap3_rom_rng_device = {
+	.name		= "omap3-rom-rng",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= rx51_secure_rng_call,
+	},
+};
+
+static void __init rx51_init_omap3_rom_rng(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		platform_device_register(&omap3_rom_rng_device);
+	}
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
@@ -1309,5 +1318,6 @@ void __init rx51_peripherals_init(void)
 
 	rx51_charger_init();
 	rx51_init_twl4030_hwmon();
+	rx51_init_omap3_rom_rng();
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7735105561d8..db168c9627a1 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -2,6 +2,8 @@
  * Board support file for Nokia N900 (aka RX-51).
  *
  * Copyright (C) 2007, 2008 Nokia
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -31,7 +33,9 @@
 #include "mux.h"
 #include "gpmc.h"
 #include "pm.h"
+#include "soc.h"
 #include "sdram-nokia.h"
+#include "omap-secure.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
@@ -103,6 +107,14 @@ static void __init rx51_init(void)
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+#ifdef CONFIG_ARM_ERRATA_430973
+		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+		/* set IBE to 1 */
+		rx51_secure_update_aux_cr(BIT(6), 0);
+#endif
+	}
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
deleted file mode 100644
index 42e5f231a799..000000000000
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include "board-zoom.h"
-
-#include "soc.h"
-#include "common.h"
-
-#define ZOOM_SMSC911X_CS	7
-#define ZOOM_SMSC911X_GPIO	158
-#define ZOOM_QUADUART_CS	3
-#define ZOOM_QUADUART_GPIO	102
-#define ZOOM_QUADUART_RST_GPIO	152
-#define QUART_CLK		1843200
-#define DEBUG_BASE		0x08000000
-#define ZOOM_ETHR_START	DEBUG_BASE
-
-static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
-	.cs             = ZOOM_SMSC911X_CS,
-	.gpio_irq       = ZOOM_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init zoom_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= ZOOM_UART_BASE,
-		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
-		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= QUART_CLK,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device zoom_debugboard_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static inline void __init zoom_init_quaduart(void)
-{
-	int quart_cs;
-	unsigned long cs_mem_base;
-	int quart_gpio = 0;
-
-	if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
-				GPIOF_OUT_INIT_LOW,
-				"TL16CP754C GPIO") < 0) {
-		pr_err("Failed to request GPIO%d for TL16CP754C\n",
-			ZOOM_QUADUART_RST_GPIO);
-		return;
-	}
-
-	quart_cs = ZOOM_QUADUART_CS;
-
-	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
-		return;
-	}
-
-	quart_gpio = ZOOM_QUADUART_GPIO;
-
-	if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
-		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
-								quart_gpio);
-
-	serial_platform_data[0].irq = gpio_to_irq(102);
-}
-
-static inline int omap_zoom_debugboard_detect(void)
-{
-	int debug_board_detect = 0;
-	int ret = 1;
-
-	debug_board_detect = ZOOM_SMSC911X_GPIO;
-
-	if (gpio_request_one(debug_board_detect, GPIOF_IN,
-			     "Zoom debug board detect") < 0) {
-		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
-		       debug_board_detect);
-		return 0;
-	}
-
-	if (!gpio_get_value(debug_board_detect)) {
-		ret = 0;
-	}
-	gpio_free(debug_board_detect);
-	return ret;
-}
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&zoom_debugboard_serial_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-int __init zoom_debugboard_init(void)
-{
-	if (!omap_zoom_debugboard_detect())
-		return 0;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	zoom_init_smsc911x();
-	zoom_init_quaduart();
-	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
deleted file mode 100644
index 3d8ecc1e05bd..000000000000
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom-peripherals.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-zoom.h"
-#include "soc.h"
-#include "common.h"
-
-#define LCD_PANEL_RESET_GPIO_PROD	96
-#define LCD_PANEL_RESET_GPIO_PILOT	55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.res_gpio		= -1,	/* filled in code */
-	.qvga_gpio		= LCD_PANEL_QVGA_GPIO,
-};
-
-static struct omap_dss_board_info zoom_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-}
-
-static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
-	.turbo_mode		= 1,
-};
-
-static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias		= "panel-nec-nl8048hl11",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 375000,
-		.controller_data	= &dss_lcd_mcspi_config,
-		.platform_data		= &zoom_lcd_pdata,
-	},
-};
-
-void __init zoom_display_init(void)
-{
-	omap_display_init(&zoom_dss_data);
-	zoom_lcd_panel_init();
-	spi_register_board_info(nec_8048_spi_board_info,
-				ARRAY_SIZE(nec_8048_spi_board_info));
-}
-
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
deleted file mode 100644
index a90375d5b2b6..000000000000
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom2.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
-#define OMAP_ZOOM_TSC2004_IRQ_GPIO	(153)
-#define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
-
-/* Zoom2 has Qwerty keyboard*/
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_UNKNOWN),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 6, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
-	.consumer_supplies      = zoom_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
-	.consumer_supplies      = zoom_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
-	.consumer_supplies      = zoom_vsim_supply,
-};
-
-static struct regulator_init_data zoom_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
-	.consumer_supplies	= zoom_vmmc3_supply,
-};
-
-static struct fixed_voltage_config zoom_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= OMAP_ZOOM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &zoom_vmmc3,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &zoom_vwlan,
-	},
-};
-
-static struct pwm_lookup zoom_pwm_lookup[] = {
-	PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"),
-	PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"),
-};
-
-static struct led_pwm zoom_pwm_leds[] = {
-	{
-		.name		= "zoom::keypad",
-		.max_brightness	= 127,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data zoom_pwm_data = {
-	.num_leds	= ARRAY_SIZE(zoom_pwm_leds),
-	.leds		= zoom_pwm_leds,
-};
-
-static struct platform_device zoom_leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &zoom_pwm_data,
-	},
-};
-
-static struct platform_pwm_backlight_data zoom_backlight_data = {
-	.pwm_id = 1,
-	.max_brightness = 127,
-	.dft_brightness = 127,
-	.pwm_period_ns = 7812500,
-};
-
-static struct platform_device zoom_backlight_pwm = {
-	.name   = "pwm-backlight",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &zoom_backlight_data,
-	},
-};
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&omap_vwlan_device,
-	&zoom_leds_pwm,
-	&zoom_backlight_pwm,
-};
-
-static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
-		.deferred	= true,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.power_saving	= true,
-	},
-	{
-		.name		= "wl1271",
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-	{}      /* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
-	.voice_connected = true,
-	.custom_routing	= true,
-
-	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
-	.has_mainmic	= true,
-	.has_submic	= true,
-	.has_hsmic	= true,
-	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int zoom_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* Audio setup */
-	omap_twl4030_audio_data.jack_detect = gpio + 2;
-	omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.setup		= zoom_twl_gpio_setup,
-};
-
-static struct twl4030_platform_data zoom_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &zoom_gpio_data,
-	.keypad		= &zoom_kp_twl4030_data,
-	.vmmc1          = &zoom_vmmc1,
-	.vmmc2          = &zoom_vmmc2,
-	.vsim           = &zoom_vsim,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&zoom_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	if (machine_is_omap_zoom2())
-		zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */
-
-	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-void __init zoom_peripherals_init(void)
-{
-	int ret;
-
-	omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
-
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-
-	omap_hsmmc_init(mmc);
-	omap_i2c_init();
-	pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
-	platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	enable_board_wakeup_source();
-	omap_serial_init();
-}
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
deleted file mode 100644
index 1a3dd865d8eb..000000000000
--- a/arch/arm/mach-omap2/board-zoom.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- * Felipe Balbi <balbi@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#define ZOOM3_EHCI_RESET_GPIO		64
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init omap_zoom_init(void)
-{
-	if (machine_is_omap_zoom2()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	} else if (machine_is_omap_zoom3()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-
-		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-		usbhs_init(&usbhs_bdata);
-	}
-
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
-			NAND_BUSWIDTH_16, nand_default_timings);
-	zoom_debugboard_init();
-	zoom_peripherals_init();
-
-	if (machine_is_omap_zoom2())
-		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-
-	zoom_display_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
deleted file mode 100644
index 2e9486940ead..000000000000
--- a/arch/arm/mach-omap2/board-zoom.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Defines for zoom boards
- */
-#include <video/omapdss.h>
-
-#define ZOOM_NAND_CS    0
-
-extern int __init zoom_debugboard_init(void);
-extern void __init zoom_peripherals_init(void);
-extern void __init zoom_display_init(void);
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index ba6534d7f155..865d30ee812f 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -421,6 +421,10 @@ static struct clk aes0_fck;
 DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
 DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
 
+static struct clk rng_fck;
+DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
+DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
+
 /*
  * Modules clock nodes
  *
@@ -966,6 +970,7 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
 	CLK(NULL,	"sha0_fck",		&sha0_fck),
 	CLK(NULL,	"aes0_fck",		&aes0_fck),
+	CLK(NULL,	"rng_fck",		&rng_fck),
 	CLK(NULL,	"timer1_fck",		&timer1_fck),
 	CLK(NULL,	"timer2_fck",		&timer2_fck),
 	CLK(NULL,	"timer3_fck",		&timer3_fck),
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 334b76745900..03a2829beb8e 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -3275,6 +3275,7 @@ static struct omap_clk omap36xx_clks[] = {
 static struct omap_clk omap34xx_omap36xx_clks[] = {
 	CLK(NULL,	"aes1_ick",	&aes1_ick),
 	CLK("omap_rng",	"ick",		&rng_ick),
+	CLK("omap3-rom-rng",	"ick",	&rng_ick),
 	CLK(NULL,	"sha11_ick",	&sha11_ick),
 	CLK(NULL,	"des1_ick",	&des1_ick),
 	CLK(NULL,	"cam_mclk",	&cam_mclk),
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 88e37a474334..b237950eb8a3 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("omap-gpmc",	"fck",			&dummy_ck),
+	CLK("50000000.gpmc",	"fck",			&dummy_ck),
 	CLK("omap_i2c.1",	"ick",			&dummy_ck),
 	CLK("omap_i2c.2",	"ick",			&dummy_ck),
 	CLK("omap_i2c.3",	"ick",			&dummy_ck),
@@ -1707,6 +1707,18 @@ int __init omap4xxx_clk_init(void)
 	omap2_clk_disable_autoidle_all();
 
 	/*
+	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
+	 * when its in bypass. So always lock USB before ABE DPLL.
+	 */
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	/*
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
@@ -1718,13 +1730,5 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index 25b1feed480d..c78e893eba7d 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -52,7 +52,7 @@ static bool omap2xxx_clk_apll_locked(struct clk_hw *hw)
 
 	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
 
-	r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	r = omap2xxx_cm_get_pll_status();
 
 	return ((r & apll_mask) == apll_mask) ? true : false;
 }
@@ -126,7 +126,7 @@ u32 omap2xxx_get_apll_clkin(void)
 {
 	u32 aplls, srate = 0;
 
-	aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls = omap2xxx_cm_get_pll_config();
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index d8620105c42a..3ff32543493c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -60,8 +60,7 @@ unsigned long omap2xxx_clk_get_core_rate(void)
 
 	core_clk = omap2_get_dpll_rate(dpll_core_ck);
 
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+	v = omap2xxx_cm_get_core_clk_src();
 
 	if (v == CORE_CLK_SRC_32K)
 		core_clk = 32768;
@@ -79,8 +78,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
-	core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+	core_clk_src = omap2xxx_cm_get_core_clk_src();
 
 	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
 		high = curr_prcm_set->dpll_speed * 2;
@@ -120,8 +118,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 	const struct dpll_data *dd;
 
 	cur_rate = omap2xxx_clk_get_core_rate();
-	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	mult = omap2xxx_cm_get_core_clk_src();
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -145,7 +142,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
 		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
 		if (rate > low) {
 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index ae2b35e76dc8..b935ed2922d8 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -98,7 +98,7 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 			    unsigned long parent_rate)
 {
-	u32 cur_rate, done_rate, bypass = 0, tmp;
+	u32 cur_rate, done_rate, bypass = 0;
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
@@ -141,23 +141,11 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 		else
 			done_rate = CORE_CLK_SRC_DPLL;
 
-		/* MPU divider */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
+		omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu,
+					     prcm->cm_clksel_dsp,
+					     prcm->cm_clksel_gfx,
+					     prcm->cm_clksel1_core,
+					     prcm->cm_clksel_mdm);
 
 		/* x2 to enter omap2xxx_sdrc_init_params() */
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0c38ca96c840..c7c5d31e9082 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -543,6 +543,44 @@ int omap2_clk_disable_autoidle_all(void)
 }
 
 /**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->deny_idle)
+		c->ops->deny_idle(c);
+	return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->allow_idle)
+		c->ops->allow_idle(c);
+	return 0;
+}
+
+/**
  * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
  * @clk_names: ptr to an array of strings of clock names to enable
  * @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 7aa32cd292f9..82916cc82c92 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -411,6 +411,8 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index daeecf1b89fa..f17f00697cc0 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -132,7 +132,7 @@ struct clockdomain {
 	u8 _flags;
 	const u8 dep_bit;
 	const u8 prcm_partition;
-	const s16 cm_inst;
+	const u16 cm_inst;
 	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
@@ -217,6 +217,8 @@ extern void __init omap3xxx_clockdomains_init(void);
 extern void __init am33xx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void __init omap54xx_clockdomains_init(void);
+extern void __init dra7xx_clockdomains_init(void);
+void am43xx_clockdomains_init(void);
 
 extern void clkdm_add_autodeps(struct clockdomain *clkdm);
 extern void clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -225,6 +227,7 @@ extern struct clkdm_ops omap2_clkdm_operations;
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
 extern struct clkdm_ops am33xx_clkdm_operations;
+extern struct clkdm_ops am43xx_clkdm_operations;
 
 extern struct clkdm_dep gfx_24xx_wkdeps[];
 extern struct clkdm_dep dsp_24xx_wkdeps[];
diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c
new file mode 100644
index 000000000000..6d71c6082a24
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains43xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM43xx Clock domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct clockdomain l4_cefuse_43xx_clkdm = {
+	.name		  = "l4_cefuse_clkdm",
+	.pwrdm		  = { .name = "cefuse_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_CEFUSE_INST,
+	.clkdm_offs	  = AM43XX_CM_CEFUSE_CEFUSE_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_43xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_MPU_INST,
+	.clkdm_offs	  = AM43XX_CM_MPU_MPU_CDOFFS,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4ls_43xx_clkdm = {
+	.name		  = "l4ls_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L4LS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain tamper_43xx_clkdm = {
+	.name		  = "tamper_clkdm",
+	.pwrdm		  = { .name = "tamper_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_TAMPER_INST,
+	.clkdm_offs	  = AM43XX_CM_TAMPER_TAMPER_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_43xx_clkdm = {
+	.name		  = "l4_rtc_clkdm",
+	.pwrdm		  = { .name = "rtc_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_RTC_INST,
+	.clkdm_offs	  = AM43XX_CM_RTC_RTC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_43xx_clkdm = {
+	.name		  = "pruss_ocp_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_ICSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_43xx_clkdm = {
+	.name		  = "ocpwp_l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_OCPWP_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_tsc_43xx_clkdm = {
+	.name		  = "l3s_tsc_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3S_TSC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain dss_43xx_clkdm = {
+	.name		  = "dss_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_DSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_43xx_clkdm = {
+	.name		  = "l3_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3_AON_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain emif_43xx_clkdm = {
+	.name		  = "emif_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_EMIF_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_43xx_clkdm = {
+	.name		  = "l4_wkup_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS,
+};
+
+static struct clockdomain l3_43xx_clkdm = {
+	.name		  = "l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_43xx_clkdm = {
+	.name		  = "l4_wkup_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_WKUP_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_43xx_clkdm = {
+	.name		  = "cpsw_125mhz_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_CPSW_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_43xx_clkdm = {
+	.name		  = "gfx_l3_clkdm",
+	.pwrdm		  = { .name = "gfx_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_GFX_INST,
+	.clkdm_offs	  = AM43XX_CM_GFX_GFX_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_43xx_clkdm = {
+	.name		  = "l3s_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3S_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am43xx[] __initdata = {
+	&l4_cefuse_43xx_clkdm,
+	&mpu_43xx_clkdm,
+	&l4ls_43xx_clkdm,
+	&tamper_43xx_clkdm,
+	&l4_rtc_43xx_clkdm,
+	&pruss_ocp_43xx_clkdm,
+	&ocpwp_l3_43xx_clkdm,
+	&l3s_tsc_43xx_clkdm,
+	&dss_43xx_clkdm,
+	&l3_aon_43xx_clkdm,
+	&emif_43xx_clkdm,
+	&l4_wkup_aon_43xx_clkdm,
+	&l3_43xx_clkdm,
+	&l4_wkup_43xx_clkdm,
+	&cpsw_125mhz_43xx_clkdm,
+	&gfx_l3_43xx_clkdm,
+	&l3s_43xx_clkdm,
+	NULL
+};
+
+void __init am43xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&am43xx_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_am43xx);
+	clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
new file mode 100644
index 000000000000..57d5df0c1fbd
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -0,0 +1,740 @@
+/*
+ * DRA7xx Clock domains framework
+ *
+ * Copyright (C) 2009-2013 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Nokia Corporation
+ *
+ * Generated by code originally written by:
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm1_7xx.h"
+#include "cm2_7xx.h"
+
+#include "cm-regbits-7xx.h"
+#include "prm7xx.h"
+#include "prcm44xx.h"
+#include "prcm_mpu7xx.h"
+
+/* Static Dependencies for DRA7xx Clock Domains */
+
+static struct clkdm_dep cam_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dma_wkup_sleep_deps[] = {
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dsp1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dsp2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dss_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve3_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve4_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep gmac_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep gpu_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep ipu1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep ipu2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep iva_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l3init_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l4per2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l4sec_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep mpu_wkup_sleep_deps[] = {
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep pcie_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep vpe_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ NULL },
+};
+
+static struct clockdomain l4per3_7xx_clkdm = {
+	.name		  = "l4per3_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER3_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER3_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4per2_7xx_clkdm = {
+	.name		  = "l4per2_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER2_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER2_STATDEP_SHIFT,
+	.wkdep_srcs	  = l4per2_wkup_sleep_deps,
+	.sleepdep_srcs	  = l4per2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu0_7xx_clkdm = {
+	.name		  = "mpu0_clkdm",
+	.pwrdm		  = { .name = "cpu0_pwrdm" },
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.cm_inst	  = DRA7XX_MPU_PRCM_CM_C0_INST,
+	.clkdm_offs	  = DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain iva_7xx_clkdm = {
+	.name		  = "iva_clkdm",
+	.pwrdm		  = { .name = "iva_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_IVA_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_IVA_IVA_CDOFFS,
+	.dep_bit	  = DRA7XX_IVA_STATDEP_SHIFT,
+	.wkdep_srcs	  = iva_wkup_sleep_deps,
+	.sleepdep_srcs	  = iva_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain coreaon_7xx_clkdm = {
+	.name		  = "coreaon_clkdm",
+	.pwrdm		  = { .name = "coreaon_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_COREAON_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_COREAON_COREAON_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain ipu1_7xx_clkdm = {
+	.name		  = "ipu1_clkdm",
+	.pwrdm		  = { .name = "ipu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU1_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU1_STATDEP_SHIFT,
+	.wkdep_srcs	  = ipu1_wkup_sleep_deps,
+	.sleepdep_srcs	  = ipu1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain ipu2_7xx_clkdm = {
+	.name		  = "ipu2_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_IPU2_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU2_STATDEP_SHIFT,
+	.wkdep_srcs	  = ipu2_wkup_sleep_deps,
+	.sleepdep_srcs	  = ipu2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l3init_7xx_clkdm = {
+	.name		  = "l3init_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_L3INIT_CDOFFS,
+	.dep_bit	  = DRA7XX_L3INIT_STATDEP_SHIFT,
+	.wkdep_srcs	  = l3init_wkup_sleep_deps,
+	.sleepdep_srcs	  = l3init_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4sec_7xx_clkdm = {
+	.name		  = "l4sec_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4SEC_CDOFFS,
+	.dep_bit	  = DRA7XX_L4SEC_STATDEP_SHIFT,
+	.wkdep_srcs	  = l4sec_wkup_sleep_deps,
+	.sleepdep_srcs	  = l4sec_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l3main1_7xx_clkdm = {
+	.name		  = "l3main1_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L3MAIN1_CDOFFS,
+	.dep_bit	  = DRA7XX_L3MAIN1_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain vpe_7xx_clkdm = {
+	.name		  = "vpe_clkdm",
+	.pwrdm		  = { .name = "vpe_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_VPE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_VPE_VPE_CDOFFS,
+	.dep_bit	  = DRA7XX_VPE_STATDEP_SHIFT,
+	.wkdep_srcs	  = vpe_wkup_sleep_deps,
+	.sleepdep_srcs	  = vpe_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu_7xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_MPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_MPU_MPU_CDOFFS,
+	.wkdep_srcs	  = mpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = mpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain custefuse_7xx_clkdm = {
+	.name		  = "custefuse_clkdm",
+	.pwrdm		  = { .name = "custefuse_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CUSTEFUSE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain ipu_7xx_clkdm = {
+	.name		  = "ipu_clkdm",
+	.pwrdm		  = { .name = "ipu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu1_7xx_clkdm = {
+	.name		  = "mpu1_clkdm",
+	.pwrdm		  = { .name = "cpu1_pwrdm" },
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.cm_inst	  = DRA7XX_MPU_PRCM_CM_C1_INST,
+	.clkdm_offs	  = DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain gmac_7xx_clkdm = {
+	.name		  = "gmac_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_GMAC_CDOFFS,
+	.dep_bit	  = DRA7XX_GMAC_STATDEP_SHIFT,
+	.wkdep_srcs	  = gmac_wkup_sleep_deps,
+	.sleepdep_srcs	  = gmac_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4cfg_7xx_clkdm = {
+	.name		  = "l4cfg_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L4CFG_CDOFFS,
+	.dep_bit	  = DRA7XX_L4CFG_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain dma_7xx_clkdm = {
+	.name		  = "dma_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_DMA_CDOFFS,
+	.wkdep_srcs	  = dma_wkup_sleep_deps,
+	.sleepdep_srcs	  = dma_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain rtc_7xx_clkdm = {
+	.name		  = "rtc_clkdm",
+	.pwrdm		  = { .name = "rtc_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_RTC_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_RTC_RTC_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain pcie_7xx_clkdm = {
+	.name		  = "pcie_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_PCIE_CDOFFS,
+	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
+	.wkdep_srcs	  = pcie_wkup_sleep_deps,
+	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain atl_7xx_clkdm = {
+	.name		  = "atl_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_ATL_CDOFFS,
+	.dep_bit	  = DRA7XX_ATL_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain l3instr_7xx_clkdm = {
+	.name		  = "l3instr_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L3INSTR_CDOFFS,
+};
+
+static struct clockdomain dss_7xx_clkdm = {
+	.name		  = "dss_clkdm",
+	.pwrdm		  = { .name = "dss_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_DSS_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_DSS_DSS_CDOFFS,
+	.dep_bit	  = DRA7XX_DSS_STATDEP_SHIFT,
+	.wkdep_srcs	  = dss_wkup_sleep_deps,
+	.sleepdep_srcs	  = dss_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain emif_7xx_clkdm = {
+	.name		  = "emif_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_EMIF_CDOFFS,
+	.dep_bit	  = DRA7XX_EMIF_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain emu_7xx_clkdm = {
+	.name		  = "emu_clkdm",
+	.pwrdm		  = { .name = "emu_pwrdm" },
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.cm_inst	  = DRA7XX_PRM_EMU_CM_INST,
+	.clkdm_offs	  = DRA7XX_PRM_EMU_CM_EMU_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain dsp2_7xx_clkdm = {
+	.name		  = "dsp2_clkdm",
+	.pwrdm		  = { .name = "dsp2_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_DSP2_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_DSP2_DSP2_CDOFFS,
+	.dep_bit	  = DRA7XX_DSP2_STATDEP_SHIFT,
+	.wkdep_srcs	  = dsp2_wkup_sleep_deps,
+	.sleepdep_srcs	  = dsp2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain dsp1_7xx_clkdm = {
+	.name		  = "dsp1_clkdm",
+	.pwrdm		  = { .name = "dsp1_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_DSP1_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_DSP1_DSP1_CDOFFS,
+	.dep_bit	  = DRA7XX_DSP1_STATDEP_SHIFT,
+	.wkdep_srcs	  = dsp1_wkup_sleep_deps,
+	.sleepdep_srcs	  = dsp1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain cam_7xx_clkdm = {
+	.name		  = "cam_clkdm",
+	.pwrdm		  = { .name = "cam_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CAM_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CAM_CAM_CDOFFS,
+	.dep_bit	  = DRA7XX_CAM_STATDEP_SHIFT,
+	.wkdep_srcs	  = cam_wkup_sleep_deps,
+	.sleepdep_srcs	  = cam_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4per_7xx_clkdm = {
+	.name		  = "l4per_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain gpu_7xx_clkdm = {
+	.name		  = "gpu_clkdm",
+	.pwrdm		  = { .name = "gpu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_GPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_GPU_GPU_CDOFFS,
+	.dep_bit	  = DRA7XX_GPU_STATDEP_SHIFT,
+	.wkdep_srcs	  = gpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = gpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve4_7xx_clkdm = {
+	.name		  = "eve4_clkdm",
+	.pwrdm		  = { .name = "eve4_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE4_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE4_EVE4_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE4_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve4_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve4_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve2_7xx_clkdm = {
+	.name		  = "eve2_clkdm",
+	.pwrdm		  = { .name = "eve2_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE2_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE2_EVE2_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE2_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve2_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve3_7xx_clkdm = {
+	.name		  = "eve3_clkdm",
+	.pwrdm		  = { .name = "eve3_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE3_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE3_EVE3_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE3_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve3_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve3_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain wkupaon_7xx_clkdm = {
+	.name		  = "wkupaon_clkdm",
+	.pwrdm		  = { .name = "wkupaon_pwrdm" },
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.cm_inst	  = DRA7XX_PRM_WKUPAON_CM_INST,
+	.clkdm_offs	  = DRA7XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS,
+	.dep_bit	  = DRA7XX_WKUPAON_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain eve1_7xx_clkdm = {
+	.name		  = "eve1_clkdm",
+	.pwrdm		  = { .name = "eve1_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE1_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE1_EVE1_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE1_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve1_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+/* As clockdomains are added or removed above, this list must also be changed */
+static struct clockdomain *clockdomains_dra7xx[] __initdata = {
+	&l4per3_7xx_clkdm,
+	&l4per2_7xx_clkdm,
+	&mpu0_7xx_clkdm,
+	&iva_7xx_clkdm,
+	&coreaon_7xx_clkdm,
+	&ipu1_7xx_clkdm,
+	&ipu2_7xx_clkdm,
+	&l3init_7xx_clkdm,
+	&l4sec_7xx_clkdm,
+	&l3main1_7xx_clkdm,
+	&vpe_7xx_clkdm,
+	&mpu_7xx_clkdm,
+	&custefuse_7xx_clkdm,
+	&ipu_7xx_clkdm,
+	&mpu1_7xx_clkdm,
+	&gmac_7xx_clkdm,
+	&l4cfg_7xx_clkdm,
+	&dma_7xx_clkdm,
+	&rtc_7xx_clkdm,
+	&pcie_7xx_clkdm,
+	&atl_7xx_clkdm,
+	&l3instr_7xx_clkdm,
+	&dss_7xx_clkdm,
+	&emif_7xx_clkdm,
+	&emu_7xx_clkdm,
+	&dsp2_7xx_clkdm,
+	&dsp1_7xx_clkdm,
+	&cam_7xx_clkdm,
+	&l4per_7xx_clkdm,
+	&gpu_7xx_clkdm,
+	&eve4_7xx_clkdm,
+	&eve2_7xx_clkdm,
+	&eve3_7xx_clkdm,
+	&wkupaon_7xx_clkdm,
+	&eve1_7xx_clkdm,
+	NULL
+};
+
+void __init dra7xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&omap4_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_dra7xx);
+	clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 669ef51b17a8..8538669cc2ad 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -14,439 +14,121 @@
  * published by the Free Software Foundation.
  */
 
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP24XX_EN_CAM_SHIFT				31
-#define OMAP24XX_EN_CAM_MASK				(1 << 31)
 #define OMAP24XX_EN_WDT4_SHIFT				29
-#define OMAP24XX_EN_WDT4_MASK				(1 << 29)
 #define OMAP2420_EN_WDT3_SHIFT				28
-#define OMAP2420_EN_WDT3_MASK				(1 << 28)
 #define OMAP24XX_EN_MSPRO_SHIFT				27
-#define OMAP24XX_EN_MSPRO_MASK				(1 << 27)
 #define OMAP24XX_EN_FAC_SHIFT				25
-#define OMAP24XX_EN_FAC_MASK				(1 << 25)
 #define OMAP2420_EN_EAC_SHIFT				24
-#define OMAP2420_EN_EAC_MASK				(1 << 24)
 #define OMAP24XX_EN_HDQ_SHIFT				23
-#define OMAP24XX_EN_HDQ_MASK				(1 << 23)
 #define OMAP2420_EN_I2C2_SHIFT				20
-#define OMAP2420_EN_I2C2_MASK				(1 << 20)
 #define OMAP2420_EN_I2C1_SHIFT				19
-#define OMAP2420_EN_I2C1_MASK				(1 << 19)
-
-/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
 #define OMAP2430_EN_MCBSP5_SHIFT			5
-#define OMAP2430_EN_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_EN_MCBSP4_SHIFT			4
-#define OMAP2430_EN_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_EN_MCBSP3_SHIFT			3
-#define OMAP2430_EN_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_EN_SSI_SHIFT				1
-#define OMAP24XX_EN_SSI_MASK				(1 << 1)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
 #define OMAP24XX_EN_MPU_WDT_SHIFT			3
-#define OMAP24XX_EN_MPU_WDT_MASK			(1 << 3)
-
-/* Bits specific to each register */
-
-/* CM_IDLEST_MPU */
-/* 2430 only */
-#define OMAP2430_ST_MPU_MASK				(1 << 0)
-
-/* CM_CLKSEL_MPU */
 #define OMAP24XX_CLKSEL_MPU_SHIFT			0
-#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
 #define OMAP24XX_CLKSEL_MPU_WIDTH			5
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP24XX_AUTOSTATE_MPU_SHIFT			0
 #define OMAP24XX_AUTOSTATE_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits*/
 #define OMAP24XX_EN_TV_SHIFT				2
-#define OMAP24XX_EN_TV_MASK				(1 << 2)
 #define OMAP24XX_EN_DSS2_SHIFT				1
-#define OMAP24XX_EN_DSS2_MASK				(1 << 1)
 #define OMAP24XX_EN_DSS1_SHIFT				0
 #define OMAP24XX_EN_DSS1_MASK				(1 << 0)
-
-/* CM_FCLKEN2_CORE specific bits */
 #define OMAP2430_EN_I2CHS2_SHIFT			20
-#define OMAP2430_EN_I2CHS2_MASK				(1 << 20)
 #define OMAP2430_EN_I2CHS1_SHIFT			19
-#define OMAP2430_EN_I2CHS1_MASK				(1 << 19)
 #define OMAP2430_EN_MMCHSDB2_SHIFT			17
-#define OMAP2430_EN_MMCHSDB2_MASK			(1 << 17)
 #define OMAP2430_EN_MMCHSDB1_SHIFT			16
-#define OMAP2430_EN_MMCHSDB1_MASK			(1 << 16)
-
-/* CM_ICLKEN1_CORE specific bits */
 #define OMAP24XX_EN_MAILBOXES_SHIFT			30
-#define OMAP24XX_EN_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_EN_DSS_SHIFT				0
-#define OMAP24XX_EN_DSS_MASK				(1 << 0)
-
-/* CM_ICLKEN2_CORE specific bits */
-
-/* CM_ICLKEN3_CORE */
-/* 2430 only */
 #define OMAP2430_EN_SDRC_SHIFT				2
-#define OMAP2430_EN_SDRC_MASK				(1 << 2)
-
-/* CM_ICLKEN4_CORE */
 #define OMAP24XX_EN_PKA_SHIFT				4
-#define OMAP24XX_EN_PKA_MASK				(1 << 4)
 #define OMAP24XX_EN_AES_SHIFT				3
-#define OMAP24XX_EN_AES_MASK				(1 << 3)
 #define OMAP24XX_EN_RNG_SHIFT				2
-#define OMAP24XX_EN_RNG_MASK				(1 << 2)
 #define OMAP24XX_EN_SHA_SHIFT				1
-#define OMAP24XX_EN_SHA_MASK				(1 << 1)
 #define OMAP24XX_EN_DES_SHIFT				0
-#define OMAP24XX_EN_DES_MASK				(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
 #define OMAP24XX_ST_MAILBOXES_SHIFT			30
-#define OMAP24XX_ST_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_ST_WDT4_SHIFT				29
-#define OMAP24XX_ST_WDT4_MASK				(1 << 29)
-#define OMAP2420_ST_WDT3_SHIFT				28
-#define OMAP2420_ST_WDT3_MASK				(1 << 28)
-#define OMAP24XX_ST_MSPRO_SHIFT				27
-#define OMAP24XX_ST_MSPRO_MASK				(1 << 27)
-#define OMAP24XX_ST_FAC_SHIFT				25
-#define OMAP24XX_ST_FAC_MASK				(1 << 25)
-#define OMAP2420_ST_EAC_SHIFT				24
-#define OMAP2420_ST_EAC_MASK				(1 << 24)
 #define OMAP24XX_ST_HDQ_SHIFT				23
-#define OMAP24XX_ST_HDQ_MASK				(1 << 23)
 #define OMAP2420_ST_I2C2_SHIFT				20
-#define OMAP2420_ST_I2C2_MASK				(1 << 20)
 #define OMAP2430_ST_I2CHS1_SHIFT			19
-#define OMAP2430_ST_I2CHS1_MASK				(1 << 19)
 #define OMAP2420_ST_I2C1_SHIFT				19
-#define OMAP2420_ST_I2C1_MASK				(1 << 19)
 #define OMAP2430_ST_I2CHS2_SHIFT			20
-#define OMAP2430_ST_I2CHS2_MASK				(1 << 20)
 #define OMAP24XX_ST_MCBSP2_SHIFT			16
-#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
 #define OMAP24XX_ST_MCBSP1_SHIFT			15
-#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
 #define OMAP24XX_ST_DSS_SHIFT				0
-#define OMAP24XX_ST_DSS_MASK				(1 << 0)
-
-/* CM_IDLEST2_CORE */
 #define OMAP2430_ST_MCBSP5_SHIFT			5
-#define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_ST_MCBSP4_SHIFT			4
-#define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_ST_MCBSP3_SHIFT			3
-#define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
-#define OMAP24XX_ST_SSI_SHIFT				1
-#define OMAP24XX_ST_SSI_MASK				(1 << 1)
-
-/* CM_IDLEST3_CORE */
-/* 2430 only */
-#define OMAP2430_ST_SDRC_MASK				(1 << 2)
-
-/* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA_SHIFT				4
-#define OMAP24XX_ST_PKA_MASK				(1 << 4)
 #define OMAP24XX_ST_AES_SHIFT				3
-#define OMAP24XX_ST_AES_MASK				(1 << 3)
 #define OMAP24XX_ST_RNG_SHIFT				2
-#define OMAP24XX_ST_RNG_MASK				(1 << 2)
 #define OMAP24XX_ST_SHA_SHIFT				1
-#define OMAP24XX_ST_SHA_MASK				(1 << 1)
-#define OMAP24XX_ST_DES_SHIFT				0
-#define OMAP24XX_ST_DES_MASK				(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM_MASK				(1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_AUTO_WDT4_MASK				(1 << 29)
-#define OMAP2420_AUTO_WDT3_MASK				(1 << 28)
-#define OMAP24XX_AUTO_MSPRO_MASK			(1 << 27)
-#define OMAP2420_AUTO_MMC_MASK				(1 << 26)
-#define OMAP24XX_AUTO_FAC_MASK				(1 << 25)
-#define OMAP2420_AUTO_EAC_MASK				(1 << 24)
-#define OMAP24XX_AUTO_HDQ_MASK				(1 << 23)
-#define OMAP24XX_AUTO_UART2_MASK			(1 << 22)
-#define OMAP24XX_AUTO_UART1_MASK			(1 << 21)
-#define OMAP24XX_AUTO_I2C2_MASK				(1 << 20)
-#define OMAP24XX_AUTO_I2C1_MASK				(1 << 19)
-#define OMAP24XX_AUTO_MCSPI2_MASK			(1 << 18)
-#define OMAP24XX_AUTO_MCSPI1_MASK			(1 << 17)
-#define OMAP24XX_AUTO_MCBSP2_MASK			(1 << 16)
-#define OMAP24XX_AUTO_MCBSP1_MASK			(1 << 15)
-#define OMAP24XX_AUTO_GPT12_MASK			(1 << 14)
-#define OMAP24XX_AUTO_GPT11_MASK			(1 << 13)
-#define OMAP24XX_AUTO_GPT10_MASK			(1 << 12)
-#define OMAP24XX_AUTO_GPT9_MASK				(1 << 11)
-#define OMAP24XX_AUTO_GPT8_MASK				(1 << 10)
-#define OMAP24XX_AUTO_GPT7_MASK				(1 << 9)
-#define OMAP24XX_AUTO_GPT6_MASK				(1 << 8)
-#define OMAP24XX_AUTO_GPT5_MASK				(1 << 7)
-#define OMAP24XX_AUTO_GPT4_MASK				(1 << 6)
-#define OMAP24XX_AUTO_GPT3_MASK				(1 << 5)
-#define OMAP24XX_AUTO_GPT2_MASK				(1 << 4)
-#define OMAP2420_AUTO_VLYNQ_MASK			(1 << 3)
-#define OMAP24XX_AUTO_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC_MASK			(1 << 11)
-#define OMAP2430_AUTO_GPIO5_MASK			(1 << 10)
-#define OMAP2430_AUTO_MCSPI3_MASK			(1 << 9)
-#define OMAP2430_AUTO_MMCHS2_MASK			(1 << 8)
-#define OMAP2430_AUTO_MMCHS1_MASK			(1 << 7)
-#define OMAP2430_AUTO_USBHS_MASK			(1 << 6)
-#define OMAP2430_AUTO_MCBSP5_MASK			(1 << 5)
-#define OMAP2430_AUTO_MCBSP4_MASK			(1 << 4)
-#define OMAP2430_AUTO_MCBSP3_MASK			(1 << 3)
-#define OMAP24XX_AUTO_UART3_MASK			(1 << 2)
-#define OMAP24XX_AUTO_SSI_MASK				(1 << 1)
-#define OMAP24XX_AUTO_USB_MASK				(1 << 0)
-
-/* CM_AUTOIDLE3_CORE */
 #define OMAP24XX_AUTO_SDRC_SHIFT			2
-#define OMAP24XX_AUTO_SDRC_MASK				(1 << 2)
 #define OMAP24XX_AUTO_GPMC_SHIFT			1
-#define OMAP24XX_AUTO_GPMC_MASK				(1 << 1)
 #define OMAP24XX_AUTO_SDMA_SHIFT			0
-#define OMAP24XX_AUTO_SDMA_MASK				(1 << 0)
-
-/* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA_MASK				(1 << 4)
-#define OMAP24XX_AUTO_AES_MASK				(1 << 3)
-#define OMAP24XX_AUTO_RNG_MASK				(1 << 2)
-#define OMAP24XX_AUTO_SHA_MASK				(1 << 1)
-#define OMAP24XX_AUTO_DES_MASK				(1 << 0)
-
-/* CM_CLKSEL1_CORE */
-#define OMAP24XX_CLKSEL_USB_SHIFT			25
 #define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
-#define OMAP24XX_CLKSEL_SSI_SHIFT			20
 #define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
-#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
 #define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
-#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
 #define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
-#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
 #define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
 #define OMAP24XX_CLKSEL_L4_SHIFT			5
-#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
 #define OMAP24XX_CLKSEL_L4_WIDTH			2
 #define OMAP24XX_CLKSEL_L3_SHIFT			0
-#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
 #define OMAP24XX_CLKSEL_L3_WIDTH			5
-
-/* CM_CLKSEL2_CORE */
-#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
 #define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
-#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
 #define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
-#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
 #define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
-#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
 #define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
-#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
 #define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
-#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
 #define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
-#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
 #define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
-#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
 #define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
-#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
 #define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
-#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
 #define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
-#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
 #define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP24XX_AUTOSTATE_DSS_SHIFT			2
 #define OMAP24XX_AUTOSTATE_DSS_MASK			(1 << 2)
-#define OMAP24XX_AUTOSTATE_L4_SHIFT			1
 #define OMAP24XX_AUTOSTATE_L4_MASK			(1 << 1)
-#define OMAP24XX_AUTOSTATE_L3_SHIFT			0
 #define OMAP24XX_AUTOSTATE_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
 #define OMAP24XX_EN_3D_SHIFT				2
-#define OMAP24XX_EN_3D_MASK				(1 << 2)
 #define OMAP24XX_EN_2D_SHIFT				1
-#define OMAP24XX_EN_2D_MASK				(1 << 1)
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP24XX_AUTOSTATE_GFX_SHIFT			0
 #define OMAP24XX_AUTOSTATE_GFX_MASK			(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
-
-/* CM_ICLKEN_WKUP specific bits */
 #define OMAP2430_EN_ICR_SHIFT				6
-#define OMAP2430_EN_ICR_MASK				(1 << 6)
 #define OMAP24XX_EN_OMAPCTRL_SHIFT			5
-#define OMAP24XX_EN_OMAPCTRL_MASK			(1 << 5)
 #define OMAP24XX_EN_WDT1_SHIFT				4
-#define OMAP24XX_EN_WDT1_MASK				(1 << 4)
 #define OMAP24XX_EN_32KSYNC_SHIFT			1
-#define OMAP24XX_EN_32KSYNC_MASK			(1 << 1)
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR_SHIFT				6
-#define OMAP2430_ST_ICR_MASK				(1 << 6)
-#define OMAP24XX_ST_OMAPCTRL_SHIFT			5
-#define OMAP24XX_ST_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_ST_WDT1_SHIFT				4
-#define OMAP24XX_ST_WDT1_MASK				(1 << 4)
 #define OMAP24XX_ST_MPU_WDT_SHIFT			3
-#define OMAP24XX_ST_MPU_WDT_MASK			(1 << 3)
 #define OMAP24XX_ST_32KSYNC_SHIFT			1
-#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT_MASK			(1 << 3)
-#define OMAP24XX_AUTO_GPIOS_MASK			(1 << 2)
-#define OMAP24XX_AUTO_32KSYNC_MASK			(1 << 1)
-#define OMAP24XX_AUTO_GPT1_MASK				(1 << 0)
-
-/* CM_CLKSEL_WKUP */
-#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
 #define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
-
-/* CM_CLKEN_PLL */
 #define OMAP24XX_EN_54M_PLL_SHIFT			6
-#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
 #define OMAP24XX_EN_96M_PLL_SHIFT			2
-#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
-#define OMAP24XX_EN_DPLL_SHIFT				0
 #define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
-
-/* CM_IDLEST_CKGEN */
 #define OMAP24XX_ST_54M_APLL_SHIFT			9
-#define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
 #define OMAP24XX_ST_96M_APLL_SHIFT			8
-#define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
-#define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
-#define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)
-#define OMAP24XX_ST_48M_CLK_MASK			(1 << 4)
-#define OMAP24XX_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP24XX_ST_CORE_CLK_SHIFT			0
-#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP24XX_AUTO_54M_SHIFT				6
 #define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
-#define OMAP24XX_AUTO_96M_SHIFT				2
 #define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
 #define OMAP24XX_AUTO_DPLL_SHIFT			0
 #define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
-
-/* CM_CLKSEL1_PLL */
-#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
-#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
 #define OMAP24XX_APLLS_CLKIN_SHIFT			23
 #define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
-#define OMAP24XX_DPLL_MULT_SHIFT			12
 #define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
-#define OMAP24XX_DPLL_DIV_SHIFT				8
 #define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
 #define OMAP24XX_54M_SOURCE_SHIFT			5
-#define OMAP24XX_54M_SOURCE_MASK			(1 << 5)
 #define OMAP24XX_54M_SOURCE_WIDTH			1
 #define OMAP2430_96M_SOURCE_SHIFT			4
-#define OMAP2430_96M_SOURCE_MASK			(1 << 4)
 #define OMAP2430_96M_SOURCE_WIDTH			1
-#define OMAP24XX_48M_SOURCE_SHIFT			3
 #define OMAP24XX_48M_SOURCE_MASK			(1 << 3)
-#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
-#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
 #define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSP */
 #define OMAP2420_EN_IVA_COP_SHIFT			10
-#define OMAP2420_EN_IVA_COP_MASK			(1 << 10)
 #define OMAP2420_EN_IVA_MPU_SHIFT			8
-#define OMAP2420_EN_IVA_MPU_MASK			(1 << 8)
 #define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK		(1 << 0)
-
-/* CM_ICLKEN_DSP */
 #define OMAP2420_EN_DSP_IPI_SHIFT			1
-#define OMAP2420_EN_DSP_IPI_MASK			(1 << 1)
-
-/* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA_MASK				(1 << 8)
-#define OMAP2420_ST_IPI_MASK				(1 << 1)
-#define OMAP24XX_ST_DSP_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI_MASK			(1 << 1)
-
-/* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA_MASK				(1 << 13)
-#define OMAP2420_CLKSEL_IVA_SHIFT			8
 #define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
-#define OMAP24XX_SYNC_DSP_MASK				(1 << 7)
-#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
 #define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
-#define OMAP24XX_CLKSEL_DSP_SHIFT			0
 #define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
-
-/* CM_CLKSTCTRL_DSP */
-#define OMAP2420_AUTOSTATE_IVA_SHIFT			8
 #define OMAP2420_AUTOSTATE_IVA_MASK			(1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP_SHIFT			0
 #define OMAP24XX_AUTOSTATE_DSP_MASK			(1 << 0)
-
-/* CM_FCLKEN_MDM */
-/* 2430 only */
 #define OMAP2430_EN_OSC_SHIFT				1
-#define OMAP2430_EN_OSC_MASK				(1 << 1)
-
-/* CM_ICLKEN_MDM */
-/* 2430 only */
 #define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* CM_IDLEST_MDM specific bits */
-/* 2430 only */
-
-/* CM_AUTOIDLE_MDM */
-/* 2430 only */
-#define OMAP2430_AUTO_OSC_MASK				(1 << 1)
-#define OMAP2430_AUTO_MDM_MASK				(1 << 0)
-
-/* CM_CLKSEL_MDM */
-/* 2430 only */
-#define OMAP2430_SYNC_MDM_MASK				(1 << 4)
-#define OMAP2430_CLKSEL_MDM_SHIFT			0
 #define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
-
-/* CM_CLKSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_AUTOSTATE_MDM_SHIFT			0
 #define OMAP2430_AUTOSTATE_MDM_MASK			(1 << 0)
-
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
 #define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
 #define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
-
-
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index adf7bb79b18f..c0823fd6d5e0 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -20,798 +20,49 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
 
-/*
- * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
- * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
- */
-#define AM33XX_AUTO_DPLL_MODE_SHIFT			0
-#define AM33XX_AUTO_DPLL_MODE_WIDTH			3
-#define AM33XX_AUTO_DPLL_MODE_MASK			(0x7 << 0)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT		14
-#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK		(1 << 16)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT		11
-#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CAN_CLK_MASK			(1 << 11)
-
-/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_CPSW_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT	5
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK		(1 << 5)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT		6
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK		(1 << 6)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT		6
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK		(1 << 6)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT	9
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK	(1 << 9)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK		(1 << 2)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT		4
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH		1
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK		(1 << 4)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK		(1 << 2)
-
-/* Used by CM_GFX_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK		(1 << 9)
-
-/* Used by CM_GFX_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK		(1 << 8)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK		(1 << 8)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT		19
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK		(1 << 19)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT		20
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK		(1 << 20)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT		21
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK		(1 << 21)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT		22
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK		(1 << 22)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT		26
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK		(1 << 26)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT		18
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT		11
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT		24
-#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK		(1 << 24)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT		5
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK		(1 << 5)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT	6
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK		(1 << 6)
-
-/* Used by CM_PER_L3S_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK		(1 << 3)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK		(1 << 3)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3_GCLK_MASK			(1 << 4)
-
-/* Used by CM_PER_L4FW_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK		(1 << 8)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK		(1 << 3)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK		(1 << 8)
-
-/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK		(1 << 8)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT	8
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_RTC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK		(1 << 8)
-
-/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT	2
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK	(1 << 2)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK		(1 << 2)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT		17
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK		(1 << 17)
-
-/* Used by CM_PER_LCDC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_LCDC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT	5
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK	(1 << 5)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT		7
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK		(1 << 7)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK		(1 << 3)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MPU_CLK_MASK			(1 << 2)
-
-/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT		5
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK		(1 << 5)
-
-/* Used by CM_RTC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK		(1 << 9)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT		25
-#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK		(1 << 25)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK		(1 << 3)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT		10
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK		(1 << 10)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT		13
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK		(1 << 13)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT		14
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK		(1 << 14)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT		15
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK		(1 << 15)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT		16
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK		(1 << 16)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT		27
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK		(1 << 27)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT		28
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK		(1 << 28)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT		13
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK		(1 << 13)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT		12
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT		10
-#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK		(1 << 10)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK		(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK		(1 << 4)
-
-/* Used by CLKSEL_GFX_FCLK */
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT		0
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH		1
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK			(1 << 0)
-
-/* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2DIV_SHIFT				3
 #define AM33XX_CLKOUT2DIV_WIDTH				3
-#define AM33XX_CLKOUT2DIV_MASK				(0x7 << 3)
-
-/* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2EN_SHIFT				7
-#define AM33XX_CLKOUT2EN_WIDTH				1
-#define AM33XX_CLKOUT2EN_MASK				(1 << 7)
-
-/* Used by CM_CLKOUT_CTRL */
-#define AM33XX_CLKOUT2SOURCE_SHIFT			0
-#define AM33XX_CLKOUT2SOURCE_WIDTH			3
 #define AM33XX_CLKOUT2SOURCE_MASK			(0x7 << 0)
-
-/*
- * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
- * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
- * CLKSEL_TIMER7_CLK
- */
-#define AM33XX_CLKSEL_SHIFT				0
-#define AM33XX_CLKSEL_WIDTH				1
-#define AM33XX_CLKSEL_MASK				(0x01 << 0)
-
-/*
- * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
- * CM_CPTS_RFT_CLKSEL
- */
 #define AM33XX_CLKSEL_0_0_SHIFT				0
 #define AM33XX_CLKSEL_0_0_WIDTH				1
 #define AM33XX_CLKSEL_0_0_MASK				(1 << 0)
-
-#define AM33XX_CLKSEL_0_1_SHIFT				0
-#define AM33XX_CLKSEL_0_1_WIDTH				2
 #define AM33XX_CLKSEL_0_1_MASK				(3 << 0)
-
-/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
-#define AM33XX_CLKSEL_0_2_SHIFT				0
-#define AM33XX_CLKSEL_0_2_WIDTH				3
 #define AM33XX_CLKSEL_0_2_MASK				(7 << 0)
-
-/* Used by CLKSEL_GFX_FCLK */
-#define AM33XX_CLKSEL_GFX_FCLK_SHIFT			1
-#define AM33XX_CLKSEL_GFX_FCLK_WIDTH			1
 #define AM33XX_CLKSEL_GFX_FCLK_MASK			(1 << 1)
-
-/*
- * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
- * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
- * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
- * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
- * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
- * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
- */
 #define AM33XX_CLKTRCTRL_SHIFT				0
-#define AM33XX_CLKTRCTRL_WIDTH				2
 #define AM33XX_CLKTRCTRL_MASK				(0x3 << 0)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
- * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
- * CM_SSC_DELTAMSTEP_DPLL_PER
- */
-#define AM33XX_DELTAMSTEP_SHIFT				0
-#define AM33XX_DELTAMSTEP_WIDTH				20
-#define AM33XX_DELTAMSTEP_MASK				(0xfffff << 0)
-
-/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
-#define AM33XX_DPLL_BYP_CLKSEL_SHIFT			23
-#define AM33XX_DPLL_BYP_CLKSEL_WIDTH			1
-#define AM33XX_DPLL_BYP_CLKSEL_MASK			(1 << 23)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT		8
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH		1
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT		12
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH		1
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIV_SHIFT			0
 #define AM33XX_DPLL_CLKOUT_DIV_WIDTH			5
-#define AM33XX_DPLL_CLKOUT_DIV_MASK			(0x1f << 0)
-
-/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT		0
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH		7
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-
-/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT		5
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH		1
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK		(1 << 5)
-
-/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT	7
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH	1
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK		(1 << 7)
-
-/*
- * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
- * CM_DIV_M2_DPLL_PER
- */
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT		8
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH		1
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
- * CM_CLKSEL_DPLL_MPU
- */
-#define AM33XX_DPLL_DIV_SHIFT				0
-#define AM33XX_DPLL_DIV_WIDTH				7
 #define AM33XX_DPLL_DIV_MASK				(0x7f << 0)
-
 #define AM33XX_DPLL_PER_DIV_MASK			(0xff << 0)
-
-/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_DIV_0_7_SHIFT			0
-#define AM33XX_DPLL_DIV_0_7_WIDTH			8
-#define AM33XX_DPLL_DIV_0_7_MASK			(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH			1
-#define AM33XX_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_EN_SHIFT				0
-#define AM33XX_DPLL_EN_WIDTH				3
 #define AM33XX_DPLL_EN_MASK				(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_LPMODE_EN_SHIFT			10
-#define AM33XX_DPLL_LPMODE_EN_WIDTH			1
-#define AM33XX_DPLL_LPMODE_EN_MASK			(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
- * CM_CLKSEL_DPLL_MPU
- */
-#define AM33XX_DPLL_MULT_SHIFT				8
-#define AM33XX_DPLL_MULT_WIDTH				11
 #define AM33XX_DPLL_MULT_MASK				(0x7ff << 8)
-
-/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_MULT_PERIPH_SHIFT			8
-#define AM33XX_DPLL_MULT_PERIPH_WIDTH			12
 #define AM33XX_DPLL_MULT_PERIPH_MASK			(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_REGM4XEN_SHIFT			11
-#define AM33XX_DPLL_REGM4XEN_WIDTH			1
-#define AM33XX_DPLL_REGM4XEN_MASK			(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_SD_DIV_SHIFT			24
-#define AM33XX_DPLL_SD_DIV_WIDTH			8
-#define AM33XX_DPLL_SD_DIV_MASK				(0xff << 24)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_ACK_SHIFT			13
-#define AM33XX_DPLL_SSC_ACK_WIDTH			1
-#define AM33XX_DPLL_SSC_ACK_MASK			(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT		14
-#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH		1
-#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_EN_SHIFT			12
-#define AM33XX_DPLL_SSC_EN_WIDTH			1
-#define AM33XX_DPLL_SSC_EN_MASK				(1 << 12)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK		(1 << 12)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK		(1 << 12)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK		(1 << 12)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
- * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
- * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
- * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
- * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
- * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
- * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
- * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
- * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
- * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
- * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
- * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
- * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
- * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
- * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
- * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
- * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
- * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
- * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
- * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
- * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
- * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
- * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
- * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
- */
 #define AM33XX_IDLEST_SHIFT				16
-#define AM33XX_IDLEST_WIDTH				2
 #define AM33XX_IDLEST_MASK				(0x3 << 16)
-
-/* Used by CM_MAC_CLKSEL */
-#define AM33XX_MII_CLK_SEL_SHIFT			2
-#define AM33XX_MII_CLK_SEL_WIDTH			1
-#define AM33XX_MII_CLK_SEL_MASK				(1 << 2)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
- * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER
- */
-#define AM33XX_MODFREQDIV_EXPONENT_SHIFT		8
-#define AM33XX_MODFREQDIV_EXPONENT_WIDTH		3
-#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
- * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER
- */
-#define AM33XX_MODFREQDIV_MANTISSA_SHIFT		0
-#define AM33XX_MODFREQDIV_MANTISSA_WIDTH		7
-#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
- * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
- * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
- * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
- * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
- * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
- * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
- * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
- * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
- * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
- * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
- * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
- * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
- * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
- * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
- * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
- * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
- * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
- * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
- * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
- * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
- * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
- * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
- * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
- * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
- * CM_CEFUSE_CEFUSE_CLKCTRL
- */
 #define AM33XX_MODULEMODE_SHIFT				0
-#define AM33XX_MODULEMODE_WIDTH				2
 #define AM33XX_MODULEMODE_MASK				(0x3 << 0)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT			30
-#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH			1
-#define AM33XX_OPTCLK_DEBUG_CLKA_MASK			(1 << 30)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT		19
-#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK			(1 << 19)
-
-/* Used by CM_WKUP_GPIO0_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO1_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO2_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO3_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO4_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO5_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO6_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK		(1 << 18)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
- * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
- * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
- * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
- */
-#define AM33XX_STBYST_SHIFT				18
-#define AM33XX_STBYST_WIDTH				1
-#define AM33XX_STBYST_MASK				(1 << 18)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKDIVSEL_SHIFT			27
 #define AM33XX_STM_PMD_CLKDIVSEL_WIDTH			3
-#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x7 << 27)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKSEL_SHIFT			22
 #define AM33XX_STM_PMD_CLKSEL_WIDTH			2
-#define AM33XX_STM_PMD_CLKSEL_MASK			(0x3 << 22)
-
-/*
- * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
- */
-#define AM33XX_ST_DPLL_CLK_SHIFT			0
-#define AM33XX_ST_DPLL_CLK_WIDTH			1
 #define AM33XX_ST_DPLL_CLK_MASK				(1 << 0)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT			8
-#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH			1
-#define AM33XX_ST_DPLL_CLKDCOLDO_MASK			(1 << 8)
-
-/*
- * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
- * CM_DIV_M2_DPLL_PER
- */
-#define AM33XX_ST_DPLL_CLKOUT_SHIFT			9
-#define AM33XX_ST_DPLL_CLKOUT_WIDTH			1
-#define AM33XX_ST_DPLL_CLKOUT_MASK			(1 << 9)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK		(1 << 9)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK		(1 << 9)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK		(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
- */
-#define AM33XX_ST_MN_BYPASS_SHIFT			8
-#define AM33XX_ST_MN_BYPASS_WIDTH			1
-#define AM33XX_ST_MN_BYPASS_MASK			(1 << 8)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT			24
 #define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH			3
-#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x7 << 24)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKSEL_SHIFT			20
 #define AM33XX_TRC_PMD_CLKSEL_WIDTH			2
-#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x3 << 20)
-
-/* Used by CONTROL_SEC_CLK_CTRL */
-#define AM33XX_TIMER0_CLKSEL_WIDTH			2
-#define AM33XX_TIMER0_CLKSEL_MASK			(0x3 << 4)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index adf78d325804..04dab2fcf862 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -14,833 +14,201 @@
  * published by the Free Software Foundation.
  */
 
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
-#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_EN_MMC3_SHIFT			30
-#define OMAP3430_EN_MSPRO_MASK				(1 << 23)
 #define OMAP3430_EN_MSPRO_SHIFT				23
-#define OMAP3430_EN_HDQ_MASK				(1 << 22)
 #define OMAP3430_EN_HDQ_SHIFT				22
-#define OMAP3430ES1_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_EN_D2D_MASK				(1 << 3)
 #define OMAP3430ES1_EN_D2D_SHIFT			3
-#define OMAP3430_EN_SSI_MASK				(1 << 0)
 #define OMAP3430_EN_SSI_SHIFT				0
-
-/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
 #define OMAP3430ES2_EN_USBTLL_SHIFT			2
-#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2_MASK				(1 << 5)
 #define OMAP3430_EN_WDT2_SHIFT				5
-
-/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM_MASK				(1 << 0)
 #define OMAP3430_EN_CAM_SHIFT				0
-
-/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3_MASK				(1 << 12)
 #define OMAP3430_EN_WDT3_SHIFT				12
-
-/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE_MASK			(1 << 19)
-
-
-/* Bits specific to each register */
-
-/* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
-
-/* CM_CLKEN_PLL_IVA2 */
-#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_IVA2 */
 #define OMAP3430_ST_IVA2_SHIFT				0
-#define OMAP3430_ST_IVA2_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK_SHIFT			0
 #define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL_IVA2 */
-#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
 #define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_IVA2 */
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
-#define OMAP3430_IVA2_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_IVA2_CLK_SRC_WIDTH			3
-#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
 #define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
 #define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
 #define OMAP3430_IVA2_DPLL_CLKOUT_DIV_WIDTH		5
-
-/* CM_CLKSTCTRL_IVA2 */
-#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
 #define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_IVA2 */
-#define OMAP3430_CLKACTIVITY_IVA2_SHIFT			0
 #define OMAP3430_CLKACTIVITY_IVA2_MASK			(1 << 0)
-
-/* CM_REVISION specific bits */
-
-/* CM_SYSCONFIG specific bits */
-
-/* CM_CLKEN_PLL_MPU */
-#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
-#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
 #define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_MPU_DPLL_SHIFT			0
 #define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
 #define OMAP3430_ST_MPU_CLK_SHIFT			0
 #define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
 #define OMAP3430_ST_MPU_CLK_WIDTH			1
-
-/* CM_AUTOIDLE_PLL_MPU */
-#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
 #define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_MPU */
 #define OMAP3430_MPU_CLK_SRC_SHIFT			19
-#define OMAP3430_MPU_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_MPU_CLK_SRC_WIDTH			3
-#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
 #define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
 #define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_MPU */
 #define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
 #define OMAP3430_MPU_DPLL_CLKOUT_DIV_WIDTH		5
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
 #define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_MPU */
-#define OMAP3430_CLKACTIVITY_MPU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM_MASK				(1 << 31)
 #define OMAP3430_EN_MODEM_SHIFT				31
-
-/* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR_MASK				(1 << 29)
 #define OMAP3430_EN_ICR_SHIFT				29
-#define OMAP3430_EN_AES2_MASK				(1 << 28)
 #define OMAP3430_EN_AES2_SHIFT				28
-#define OMAP3430_EN_SHA12_MASK				(1 << 27)
 #define OMAP3430_EN_SHA12_SHIFT				27
-#define OMAP3430_EN_DES2_MASK				(1 << 26)
 #define OMAP3430_EN_DES2_SHIFT				26
-#define OMAP3430ES1_EN_FAC_MASK				(1 << 8)
 #define OMAP3430ES1_EN_FAC_SHIFT			8
-#define OMAP3430_EN_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
-#define OMAP3430_EN_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
-#define OMAP3430_EN_SAD2D_MASK				(1 << 3)
 #define OMAP3430_EN_SAD2D_SHIFT				3
-#define OMAP3430_EN_SDRC_MASK				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
-
-/* AM35XX specific CM_ICLKEN1_CORE bits */
-#define AM35XX_EN_IPSS_MASK				(1 << 4)
 #define AM35XX_EN_IPSS_SHIFT				4
-
-/* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA_MASK				(1 << 4)
 #define OMAP3430_EN_PKA_SHIFT				4
-#define OMAP3430_EN_AES1_MASK				(1 << 3)
 #define OMAP3430_EN_AES1_SHIFT				3
-#define OMAP3430_EN_RNG_MASK				(1 << 2)
 #define OMAP3430_EN_RNG_SHIFT				2
-#define OMAP3430_EN_SHA11_MASK				(1 << 1)
 #define OMAP3430_EN_SHA11_SHIFT				1
-#define OMAP3430_EN_DES1_MASK				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
-
-/* CM_ICLKEN3_CORE */
 #define OMAP3430_EN_MAD2D_SHIFT				3
-#define OMAP3430_EN_MAD2D_MASK				(1 << 3)
-
-/* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
-#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
 #define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
-#define OMAP3430ES2_ST_MMC3_SHIFT			30
-#define OMAP3430ES2_ST_MMC3_MASK			(1 << 30)
-#define OMAP3430_ST_ICR_SHIFT				29
-#define OMAP3430_ST_ICR_MASK				(1 << 29)
 #define OMAP3430_ST_AES2_SHIFT				28
-#define OMAP3430_ST_AES2_MASK				(1 << 28)
 #define OMAP3430_ST_SHA12_SHIFT				27
-#define OMAP3430_ST_SHA12_MASK				(1 << 27)
-#define OMAP3430_ST_DES2_SHIFT				26
-#define OMAP3430_ST_DES2_MASK				(1 << 26)
-#define OMAP3430_ST_MSPRO_SHIFT				23
-#define OMAP3430_ST_MSPRO_MASK				(1 << 23)
 #define AM35XX_ST_UART4_SHIFT				23
-#define AM35XX_ST_UART4_MASK				(1 << 23)
 #define OMAP3430_ST_HDQ_SHIFT				22
-#define OMAP3430_ST_HDQ_MASK				(1 << 22)
-#define OMAP3430ES1_ST_FAC_SHIFT			8
-#define OMAP3430ES1_ST_FAC_MASK				(1 << 8)
 #define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
-#define OMAP3430ES2_ST_SSI_IDLE_MASK			(1 << 8)
 #define OMAP3430_ST_MAILBOXES_SHIFT			7
-#define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_ST_OMAPCTRL_SHIFT			6
-#define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_ST_SAD2D_SHIFT				3
-#define OMAP3430_ST_SAD2D_MASK				(1 << 3)
 #define OMAP3430_ST_SDMA_SHIFT				2
-#define OMAP3430_ST_SDMA_MASK				(1 << 2)
-#define OMAP3430_ST_SDRC_SHIFT				1
-#define OMAP3430_ST_SDRC_MASK				(1 << 1)
-#define OMAP3430_ST_SSI_STDBY_SHIFT			0
-#define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
-
-/* AM35xx specific CM_IDLEST1_CORE bits */
 #define AM35XX_ST_IPSS_SHIFT				5
-#define AM35XX_ST_IPSS_MASK 				(1 << 5)
-
-/* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA_SHIFT				4
-#define OMAP3430_ST_PKA_MASK				(1 << 4)
-#define OMAP3430_ST_AES1_SHIFT				3
-#define OMAP3430_ST_AES1_MASK				(1 << 3)
-#define OMAP3430_ST_RNG_SHIFT				2
-#define OMAP3430_ST_RNG_MASK				(1 << 2)
-#define OMAP3430_ST_SHA11_SHIFT				1
-#define OMAP3430_ST_SHA11_MASK				(1 << 1)
-#define OMAP3430_ST_DES1_SHIFT				0
-#define OMAP3430_ST_DES1_MASK				(1 << 0)
-
-/* CM_IDLEST3_CORE */
 #define OMAP3430ES2_ST_USBTLL_SHIFT			2
-#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
-#define OMAP3430ES2_ST_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM_MASK			(1 << 31)
-#define OMAP3430_AUTO_MODEM_SHIFT			31
-#define OMAP3430ES2_AUTO_MMC3_MASK			(1 << 30)
-#define OMAP3430ES2_AUTO_MMC3_SHIFT			30
-#define OMAP3430ES2_AUTO_ICR_MASK			(1 << 29)
-#define OMAP3430ES2_AUTO_ICR_SHIFT			29
-#define OMAP3430_AUTO_AES2_MASK				(1 << 28)
-#define OMAP3430_AUTO_AES2_SHIFT			28
-#define OMAP3430_AUTO_SHA12_MASK			(1 << 27)
-#define OMAP3430_AUTO_SHA12_SHIFT			27
-#define OMAP3430_AUTO_DES2_MASK				(1 << 26)
-#define OMAP3430_AUTO_DES2_SHIFT			26
-#define OMAP3430_AUTO_MMC2_MASK				(1 << 25)
-#define OMAP3430_AUTO_MMC2_SHIFT			25
-#define OMAP3430_AUTO_MMC1_MASK				(1 << 24)
-#define OMAP3430_AUTO_MMC1_SHIFT			24
-#define OMAP3430_AUTO_MSPRO_MASK			(1 << 23)
-#define OMAP3430_AUTO_MSPRO_SHIFT			23
-#define OMAP3430_AUTO_HDQ_MASK				(1 << 22)
-#define OMAP3430_AUTO_HDQ_SHIFT				22
-#define OMAP3430_AUTO_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_AUTO_MCSPI4_SHIFT			21
-#define OMAP3430_AUTO_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_AUTO_MCSPI3_SHIFT			20
-#define OMAP3430_AUTO_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_AUTO_MCSPI2_SHIFT			19
-#define OMAP3430_AUTO_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_AUTO_MCSPI1_SHIFT			18
-#define OMAP3430_AUTO_I2C3_MASK				(1 << 17)
-#define OMAP3430_AUTO_I2C3_SHIFT			17
-#define OMAP3430_AUTO_I2C2_MASK				(1 << 16)
-#define OMAP3430_AUTO_I2C2_SHIFT			16
-#define OMAP3430_AUTO_I2C1_MASK				(1 << 15)
-#define OMAP3430_AUTO_I2C1_SHIFT			15
-#define OMAP3430_AUTO_UART2_MASK			(1 << 14)
-#define OMAP3430_AUTO_UART2_SHIFT			14
-#define OMAP3430_AUTO_UART1_MASK			(1 << 13)
-#define OMAP3430_AUTO_UART1_SHIFT			13
-#define OMAP3430_AUTO_GPT11_MASK			(1 << 12)
-#define OMAP3430_AUTO_GPT11_SHIFT			12
-#define OMAP3430_AUTO_GPT10_MASK			(1 << 11)
-#define OMAP3430_AUTO_GPT10_SHIFT			11
-#define OMAP3430_AUTO_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_AUTO_MCBSP5_SHIFT			10
-#define OMAP3430_AUTO_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_AUTO_MCBSP1_SHIFT			9
-#define OMAP3430ES1_AUTO_FAC_MASK			(1 << 8)
-#define OMAP3430ES1_AUTO_FAC_SHIFT			8
-#define OMAP3430_AUTO_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
-#define OMAP3430_AUTO_OMAPCTRL_MASK			(1 << 6)
-#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
-#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
-#define OMAP3430_AUTO_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_AUTO_D2D_MASK			(1 << 3)
-#define OMAP3430ES1_AUTO_D2D_SHIFT			3
-#define OMAP3430_AUTO_SAD2D_MASK			(1 << 3)
-#define OMAP3430_AUTO_SAD2D_SHIFT			3
-#define OMAP3430_AUTO_SSI_MASK				(1 << 0)
-#define OMAP3430_AUTO_SSI_SHIFT				0
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA_MASK				(1 << 4)
-#define OMAP3430_AUTO_PKA_SHIFT				4
-#define OMAP3430_AUTO_AES1_MASK				(1 << 3)
-#define OMAP3430_AUTO_AES1_SHIFT			3
-#define OMAP3430_AUTO_RNG_MASK				(1 << 2)
-#define OMAP3430_AUTO_RNG_SHIFT				2
-#define OMAP3430_AUTO_SHA11_MASK			(1 << 1)
-#define OMAP3430_AUTO_SHA11_SHIFT			1
-#define OMAP3430_AUTO_DES1_MASK				(1 << 0)
-#define OMAP3430_AUTO_DES1_SHIFT			0
-
-/* CM_AUTOIDLE3_CORE */
-#define	OMAP3430ES2_AUTO_USBHOST			(1 << 0)
-#define	OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
-#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
-#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
-#define OMAP3430_AUTO_MAD2D_SHIFT			3
-#define OMAP3430_AUTO_MAD2D_MASK			(1 << 3)
-
-/* CM_CLKSEL_CORE */
-#define OMAP3430_CLKSEL_SSI_SHIFT			8
 #define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
 #define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT11_SHIFT			7
 #define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT10_SHIFT			6
-#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
 #define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
 #define OMAP3430_CLKSEL_L4_SHIFT			2
-#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
 #define OMAP3430_CLKSEL_L4_WIDTH			2
 #define OMAP3430_CLKSEL_L3_SHIFT			0
-#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
 #define OMAP3430_CLKSEL_L3_WIDTH			2
-#define OMAP3630_CLKSEL_96M_SHIFT			12
 #define OMAP3630_CLKSEL_96M_MASK			(0x3 << 12)
-#define OMAP3630_CLKSEL_96M_WIDTH			2
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
 #define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
-#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
 #define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
-#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
 #define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CORE */
-#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT		2
-#define OMAP3430ES1_CLKACTIVITY_D2D_MASK		(1 << 2)
-#define OMAP3430_CLKACTIVITY_L4_SHIFT			1
-#define OMAP3430_CLKACTIVITY_L4_MASK			(1 << 1)
-#define OMAP3430_CLKACTIVITY_L3_SHIFT			0
-#define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D_MASK				(1 << 2)
 #define OMAP3430ES1_EN_3D_SHIFT				2
-#define OMAP3430ES1_EN_2D_MASK				(1 << 1)
 #define OMAP3430ES1_EN_2D_SHIFT				1
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_SLEEPDEP_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
 #define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_GFX */
-#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT		0
-#define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
-
-/* CM_FCLKEN_SGX */
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
-#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
-
-/* CM_IDLEST_SGX */
-#define OMAP3430ES2_ST_SGX_SHIFT			1
-#define OMAP3430ES2_ST_SGX_MASK				(1 << 1)
-
-/* CM_ICLKEN_SGX */
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
-#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
-
-/* CM_CLKSEL_SGX */
-#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
 #define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
-
-/* CM_CLKSTCTRL_SGX */
-#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT			0
 #define OMAP3430ES2_CLKTRCTRL_SGX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_SGX */
-#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_SGX_MASK		(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
 #define OMAP3430ES2_EN_USIMOCP_SHIFT			9
-#define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
-
-/* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1_MASK				(1 << 4)
 #define OMAP3430_EN_WDT1_SHIFT				4
-#define OMAP3430_EN_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_EN_32KSYNC_SHIFT			2
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP3430ES2_ST_USIMOCP_SHIFT			9
-#define OMAP3430ES2_ST_USIMOCP_MASK			(1 << 9)
 #define OMAP3430_ST_WDT2_SHIFT				5
-#define OMAP3430_ST_WDT2_MASK				(1 << 5)
-#define OMAP3430_ST_WDT1_SHIFT				4
-#define OMAP3430_ST_WDT1_MASK				(1 << 4)
 #define OMAP3430_ST_32KSYNC_SHIFT			2
-#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP_MASK			(1 << 9)
-#define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
-#define OMAP3430_AUTO_WDT2_MASK				(1 << 5)
-#define OMAP3430_AUTO_WDT2_SHIFT			5
-#define OMAP3430_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP3430_AUTO_WDT1_SHIFT			4
-#define OMAP3430_AUTO_GPIO1_MASK			(1 << 3)
-#define OMAP3430_AUTO_GPIO1_SHIFT			3
-#define OMAP3430_AUTO_32KSYNC_MASK			(1 << 2)
-#define OMAP3430_AUTO_32KSYNC_SHIFT			2
-#define OMAP3430_AUTO_GPT12_MASK			(1 << 1)
-#define OMAP3430_AUTO_GPT12_SHIFT			1
-#define OMAP3430_AUTO_GPT1_MASK				(1 << 0)
-#define OMAP3430_AUTO_GPT1_SHIFT			0
-
-/* CM_CLKSEL_WKUP */
 #define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
 #define OMAP3430_CLKSEL_RM_SHIFT			1
-#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
 #define OMAP3430_CLKSEL_RM_WIDTH			2
-#define OMAP3430_CLKSEL_GPT1_SHIFT			0
 #define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
-
-/* CM_CLKEN_PLL */
 #define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
 #define OMAP3430_PWRDN_CAM_SHIFT			30
 #define OMAP3430_PWRDN_DSS1_SHIFT			29
 #define OMAP3430_PWRDN_TV_SHIFT				28
 #define OMAP3430_PWRDN_96M_SHIFT			27
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
-#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
 #define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
 #define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
-#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
-#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
 #define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
 #define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
-#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_CORE_DPLL_SHIFT			0
 #define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT	10
-#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
 #define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
-#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
 #define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK_MASK			(1 << 5)
-#define OMAP3430_ST_12M_CLK_MASK			(1 << 4)
-#define OMAP3430_ST_48M_CLK_MASK			(1 << 3)
-#define OMAP3430_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
 #define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
-#define OMAP3430_ST_CORE_CLK_SHIFT			0
 #define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST2_CKGEN */
-#define OMAP3430ES2_ST_USIM_CLK_SHIFT			2
-#define OMAP3430ES2_ST_USIM_CLK_MASK			(1 << 2)
-#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
-#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
-#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
 #define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
 #define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
-#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
 #define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_AUTOIDLE2_PLL */
-#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
 #define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_CLKSEL1_PLL */
-/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
-#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_WIDTH		5
-#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
 #define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
-#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
 #define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
 #define OMAP3430_SOURCE_96M_SHIFT			6
-#define OMAP3430_SOURCE_96M_MASK			(1 << 6)
 #define OMAP3430_SOURCE_96M_WIDTH			1
 #define OMAP3430_SOURCE_54M_SHIFT			5
-#define OMAP3430_SOURCE_54M_MASK			(1 << 5)
 #define OMAP3430_SOURCE_54M_WIDTH			1
-#define OMAP3430_SOURCE_48M_SHIFT			3
 #define OMAP3430_SOURCE_48M_MASK			(1 << 3)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
 #define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3630_PERIPH_DPLL_MULT_MASK			(0xfff << 8)
-#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
 #define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
-#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT		21
 #define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK		(0x7 << 21)
-#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT		24
 #define OMAP3630_PERIPH_DPLL_SD_DIV_MASK		(0xff << 24)
-
-/* CM_CLKSEL3_PLL */
 #define OMAP3430_DIV_96M_SHIFT				0
-#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
-#define OMAP3430_DIV_96M_WIDTH				5
-#define OMAP3630_DIV_96M_MASK				(0x3f << 0)
 #define OMAP3630_DIV_96M_WIDTH				6
-
-/* CM_CLKSEL4_PLL */
-#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
 #define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
 #define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
-
-/* CM_CLKSEL5_PLL */
 #define OMAP3430ES2_DIV_120M_SHIFT			0
-#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
 #define OMAP3430ES2_DIV_120M_WIDTH			5
-
-/* CM_CLKOUT_CTRL */
 #define OMAP3430_CLKOUT2_EN_SHIFT			7
-#define OMAP3430_CLKOUT2_EN_MASK			(1 << 7)
 #define OMAP3430_CLKOUT2_DIV_SHIFT			3
-#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
 #define OMAP3430_CLKOUT2_DIV_WIDTH			3
-#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
 #define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV_MASK				(1 << 2)
 #define OMAP3430_EN_TV_SHIFT				2
-#define OMAP3430_EN_DSS2_MASK				(1 << 1)
 #define OMAP3430_EN_DSS2_SHIFT				1
-#define OMAP3430_EN_DSS1_MASK				(1 << 0)
 #define OMAP3430_EN_DSS1_SHIFT				0
-
-/* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK		(1 << 0)
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
-
-/* CM_IDLEST_DSS */
 #define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
-#define OMAP3430ES2_ST_DSS_IDLE_MASK			(1 << 1)
 #define OMAP3430ES2_ST_DSS_STDBY_SHIFT			0
-#define OMAP3430ES2_ST_DSS_STDBY_MASK			(1 << 0)
 #define OMAP3430ES1_ST_DSS_SHIFT			0
-#define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS_MASK				(1 << 0)
-#define OMAP3430_AUTO_DSS_SHIFT				0
-
-/* CM_CLKSEL_DSS */
 #define OMAP3430_CLKSEL_TV_SHIFT			8
-#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
-#define OMAP3430_CLKSEL_TV_WIDTH			5
-#define OMAP3630_CLKSEL_TV_MASK				(0x3f << 8)
 #define OMAP3630_CLKSEL_TV_WIDTH			6
 #define OMAP3430_CLKSEL_DSS1_SHIFT			0
-#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
-#define OMAP3430_CLKSEL_DSS1_WIDTH			5
-#define OMAP3630_CLKSEL_DSS1_MASK			(0x3f << 0)
 #define OMAP3630_CLKSEL_DSS1_WIDTH			6
-
-/* CM_SLEEPDEP_DSS specific bits */
-
-/* CM_CLKSTCTRL_DSS */
-#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
 #define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_DSS */
-#define OMAP3430_CLKACTIVITY_DSS_SHIFT			0
-#define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
-
-/* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2_MASK				(1 << 1)
 #define OMAP3430_EN_CSI2_SHIFT				1
-
-/* CM_ICLKEN_CAM specific bits */
-
-/* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM_MASK				(1 << 0)
-#define OMAP3430_AUTO_CAM_SHIFT				0
-
-/* CM_CLKSEL_CAM */
 #define OMAP3430_CLKSEL_CAM_SHIFT			0
-#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
-#define OMAP3430_CLKSEL_CAM_WIDTH			5
-#define OMAP3630_CLKSEL_CAM_MASK			(0x3f << 0)
 #define OMAP3630_CLKSEL_CAM_WIDTH			6
-
-/* CM_SLEEPDEP_CAM specific bits */
-
-/* CM_CLKSTCTRL_CAM */
-#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
 #define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CAM */
-#define OMAP3430_CLKACTIVITY_CAM_SHIFT			0
-#define OMAP3430_CLKACTIVITY_CAM_MASK			(1 << 0)
-
-/* CM_FCLKEN_PER specific bits */
-
-/* CM_ICLKEN_PER specific bits */
-
-/* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3_SHIFT				12
-#define OMAP3430_ST_WDT3_MASK				(1 << 12)
 #define OMAP3430_ST_MCBSP4_SHIFT			2
-#define OMAP3430_ST_MCBSP4_MASK				(1 << 2)
 #define OMAP3430_ST_MCBSP3_SHIFT			1
-#define OMAP3430_ST_MCBSP3_MASK				(1 << 1)
 #define OMAP3430_ST_MCBSP2_SHIFT			0
-#define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_PER */
-#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
-#define OMAP3630_AUTO_UART4_SHIFT			18
-#define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
-#define OMAP3430_AUTO_GPIO6_SHIFT			17
-#define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
-#define OMAP3430_AUTO_GPIO5_SHIFT			16
-#define OMAP3430_AUTO_GPIO4_MASK			(1 << 15)
-#define OMAP3430_AUTO_GPIO4_SHIFT			15
-#define OMAP3430_AUTO_GPIO3_MASK			(1 << 14)
-#define OMAP3430_AUTO_GPIO3_SHIFT			14
-#define OMAP3430_AUTO_GPIO2_MASK			(1 << 13)
-#define OMAP3430_AUTO_GPIO2_SHIFT			13
-#define OMAP3430_AUTO_WDT3_MASK				(1 << 12)
-#define OMAP3430_AUTO_WDT3_SHIFT			12
-#define OMAP3430_AUTO_UART3_MASK			(1 << 11)
-#define OMAP3430_AUTO_UART3_SHIFT			11
-#define OMAP3430_AUTO_GPT9_MASK				(1 << 10)
-#define OMAP3430_AUTO_GPT9_SHIFT			10
-#define OMAP3430_AUTO_GPT8_MASK				(1 << 9)
-#define OMAP3430_AUTO_GPT8_SHIFT			9
-#define OMAP3430_AUTO_GPT7_MASK				(1 << 8)
-#define OMAP3430_AUTO_GPT7_SHIFT			8
-#define OMAP3430_AUTO_GPT6_MASK				(1 << 7)
-#define OMAP3430_AUTO_GPT6_SHIFT			7
-#define OMAP3430_AUTO_GPT5_MASK				(1 << 6)
-#define OMAP3430_AUTO_GPT5_SHIFT			6
-#define OMAP3430_AUTO_GPT4_MASK				(1 << 5)
-#define OMAP3430_AUTO_GPT4_SHIFT			5
-#define OMAP3430_AUTO_GPT3_MASK				(1 << 4)
-#define OMAP3430_AUTO_GPT3_SHIFT			4
-#define OMAP3430_AUTO_GPT2_MASK				(1 << 3)
-#define OMAP3430_AUTO_GPT2_SHIFT			3
-#define OMAP3430_AUTO_MCBSP4_MASK			(1 << 2)
-#define OMAP3430_AUTO_MCBSP4_SHIFT			2
-#define OMAP3430_AUTO_MCBSP3_MASK			(1 << 1)
-#define OMAP3430_AUTO_MCBSP3_SHIFT			1
-#define OMAP3430_AUTO_MCBSP2_MASK			(1 << 0)
-#define OMAP3430_AUTO_MCBSP2_SHIFT			0
-
-/* CM_CLKSEL_PER */
 #define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT9_SHIFT			7
 #define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT8_SHIFT			6
 #define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
-#define OMAP3430_CLKSEL_GPT7_SHIFT			5
 #define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
-#define OMAP3430_CLKSEL_GPT6_SHIFT			4
 #define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
-#define OMAP3430_CLKSEL_GPT5_SHIFT			3
 #define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
-#define OMAP3430_CLKSEL_GPT4_SHIFT			2
 #define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
-#define OMAP3430_CLKSEL_GPT3_SHIFT			1
 #define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
-#define OMAP3430_CLKSEL_GPT2_SHIFT			0
-
-/* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* CM_CLKSTCTRL_PER */
-#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
 #define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_PER */
-#define OMAP3430_CLKACTIVITY_PER_SHIFT			0
-#define OMAP3430_CLKACTIVITY_PER_MASK			(1 << 0)
-
-/* CM_CLKSEL1_EMU */
 #define OMAP3430_DIV_DPLL4_SHIFT			24
-#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
-#define OMAP3430_DIV_DPLL4_WIDTH			5
-#define OMAP3630_DIV_DPLL4_MASK				(0x3f << 24)
 #define OMAP3630_DIV_DPLL4_WIDTH			6
 #define OMAP3430_DIV_DPLL3_SHIFT			16
-#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
 #define OMAP3430_DIV_DPLL3_WIDTH			5
 #define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
-#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
 #define OMAP3430_CLKSEL_TRACECLK_WIDTH			3
 #define OMAP3430_CLKSEL_PCLK_SHIFT			8
-#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
 #define OMAP3430_CLKSEL_PCLK_WIDTH			3
 #define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
-#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
 #define OMAP3430_CLKSEL_PCLKX2_WIDTH			2
 #define OMAP3430_CLKSEL_ATCLK_SHIFT			4
-#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
 #define OMAP3430_CLKSEL_ATCLK_WIDTH			2
 #define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
-#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
 #define OMAP3430_TRACE_MUX_CTRL_WIDTH			2
-#define OMAP3430_MUX_CTRL_SHIFT				0
 #define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
-#define OMAP3430_MUX_CTRL_WIDTH				2
-
-/* CM_CLKSTCTRL_EMU */
-#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
 #define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_EMU */
-#define OMAP3430_CLKACTIVITY_EMU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_EMU_MASK			(1 << 0)
-
-/* CM_CLKSEL2_EMU specific bits */
-#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL3_EMU specific bits */
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
-
-/* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL_MASK			(1 << 0)
-
-/* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON_MASK				(1 << 0)
-
-/* CM_CLKSTCTRL_NEON */
-#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
 #define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_USBHOST */
 #define OMAP3430ES2_EN_USBHOST2_SHIFT			1
-#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
 #define OMAP3430ES2_EN_USBHOST1_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
-
-/* CM_ICLKEN_USBHOST */
 #define OMAP3430ES2_EN_USBHOST_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
-
-/* CM_IDLEST_USBHOST */
 #define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT		1
-#define OMAP3430ES2_ST_USBHOST_IDLE_MASK		(1 << 1)
 #define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT		0
-#define OMAP3430ES2_ST_USBHOST_STDBY_MASK		(1 << 0)
-
-/* CM_AUTOIDLE_USBHOST */
-#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
-
-/* CM_SLEEPDEP_USBHOST */
-#define OMAP3430ES2_EN_MPU_SHIFT			1
-#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
-#define OMAP3430ES2_EN_IVA2_SHIFT			2
-#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
-
-/* CM_CLKSTCTRL_USBHOST */
-#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
-
-/* CM_CLKSTST_USBHOST */
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK		(1 << 0)
-
-/*
- *
- */
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
 #define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
 #define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
 #define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
 #define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
-
-
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 4c6c2f7de65b..4dbbd99b6e1e 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -22,1683 +22,125 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 
-/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_ABE_DYNDEP_SHIFT				3
-#define OMAP4430_ABE_DYNDEP_WIDTH				0x1
-#define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_ABE_STATDEP_SHIFT				3
-#define OMAP4430_ABE_STATDEP_WIDTH				0x1
-#define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
-#define OMAP4430_ALWONCORE_DYNDEP_WIDTH				0x1
-#define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
-#define OMAP4430_ALWONCORE_STATDEP_WIDTH			0x1
-#define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
-
-/*
- * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
- * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU,
- * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
- */
-#define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
-#define OMAP4430_AUTO_DPLL_MODE_WIDTH				0x3
 #define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
-#define OMAP4430_CEFUSE_DYNDEP_WIDTH				0x1
-#define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_CEFUSE_STATDEP_SHIFT				17
-#define OMAP4430_CEFUSE_STATDEP_WIDTH				0x1
-#define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT		9
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH		0x1
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
-
-/* Used by CM_DUCATI_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
-
-/* Used by CM_IVAHD_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
-
-/* Used by CM_L3_1_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3_2_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
-
-/* Used by CM_SDMA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_TESLA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT		13
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH		0x1
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK			(1 << 13)
-
-/*
- * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
- * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
- * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
- * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL
- */
 #define OMAP4430_CLKSEL_SHIFT					24
 #define OMAP4430_CLKSEL_WIDTH					0x1
 #define OMAP4430_CLKSEL_MASK					(1 << 24)
-
-/*
- * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
- * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
- */
 #define OMAP4430_CLKSEL_0_0_SHIFT				0
 #define OMAP4430_CLKSEL_0_0_WIDTH				0x1
-#define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
-
-/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
 #define OMAP4430_CLKSEL_0_1_SHIFT				0
 #define OMAP4430_CLKSEL_0_1_WIDTH				0x2
-#define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
-
-/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
 #define OMAP4430_CLKSEL_24_25_SHIFT				24
 #define OMAP4430_CLKSEL_24_25_WIDTH				0x2
-#define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_CLKSEL_60M_SHIFT				24
 #define OMAP4430_CLKSEL_60M_WIDTH				0x1
-#define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT			25
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH			0x1
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK			(1 << 25)
-
-/* Used by CM1_ABE_AESS_CLKCTRL */
 #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_AESS_FCLK_WIDTH				0x1
-#define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_CORE_SHIFT				0
 #define OMAP4430_CLKSEL_CORE_WIDTH				0x1
-#define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
-
-/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
-#define OMAP4430_CLKSEL_CORE_1_1_WIDTH				0x1
-#define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_CLKSEL_DIV_SHIFT				24
 #define OMAP4430_CLKSEL_DIV_WIDTH				0x1
-#define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT			24
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH			0x1
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK			(1 << 24)
-
-/* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP4430_CLKSEL_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_FCLK_WIDTH				0x2
-#define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
-
-/* Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH			0x1
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
-
-/*
- * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH	0x2
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L3_SHIFT				4
 #define OMAP4430_CLKSEL_L3_WIDTH				0x1
-#define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
-
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
-#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH				0x1
-#define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L4_SHIFT				8
 #define OMAP4430_CLKSEL_L4_WIDTH				0x1
-#define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_CLKSEL_OPP_SHIFT				0
 #define OMAP4430_CLKSEL_OPP_WIDTH				0x2
-#define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
 #define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH			0x3
-#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
-
-/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
-
-/*
- * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
- * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_SOURCE_SHIFT				24
-#define OMAP4430_CLKSEL_SOURCE_WIDTH				0x2
 #define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
-
-/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
-#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH			0x1
 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
 #define OMAP4430_CLKSEL_UTMI_P1_WIDTH				0x1
-#define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
 #define OMAP4430_CLKSEL_UTMI_P2_WIDTH				0x1
-#define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
-
-/*
- * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL,
- * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL,
- * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL,
- * CM_L3INIT_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
- * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL,
- * CM_L4SEC_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_SDMA_CLKSTCTRL,
- * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
- */
 #define OMAP4430_CLKTRCTRL_SHIFT				0
-#define OMAP4430_CLKTRCTRL_WIDTH				0x2
 #define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
-#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH			0x7
-#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
-#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH			0xb
-#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_CUSTOM_SHIFT					6
-#define OMAP4430_CUSTOM_WIDTH					0x2
-#define OMAP4430_CUSTOM_MASK					(0x3 << 6)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_D2D_DYNDEP_SHIFT				18
-#define OMAP4430_D2D_DYNDEP_WIDTH				0x1
-#define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP4430_D2D_STATDEP_SHIFT				18
-#define OMAP4430_D2D_STATDEP_WIDTH				0x1
-#define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_COUNT_MAX_SHIFT				24
-#define OMAP4460_DCC_COUNT_MAX_WIDTH				0x8
-#define OMAP4460_DCC_COUNT_MAX_MASK				(0xff << 24)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_EN_SHIFT					22
-#define OMAP4460_DCC_EN_MASK					(1 << 22)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
- * CM_SSC_DELTAMSTEP_DPLL_MPU, CM_SSC_DELTAMSTEP_DPLL_PER,
- * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
- */
-#define OMAP4430_DELTAMSTEP_SHIFT				0
-#define OMAP4430_DELTAMSTEP_WIDTH				0x14
-#define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
-
-/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
-#define OMAP4460_DELTAMSTEP_0_20_SHIFT				0
-#define OMAP4460_DELTAMSTEP_0_20_WIDTH				0x15
-#define OMAP4460_DELTAMSTEP_0_20_MASK				(0x1fffff << 0)
-
-/* Used by CM_DLL_CTRL */
-#define OMAP4430_DLL_OVERRIDE_SHIFT				0
-#define OMAP4430_DLL_OVERRIDE_WIDTH				0x1
-#define OMAP4430_DLL_OVERRIDE_MASK				(1 << 0)
-
-/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_OVERRIDE_2_2_SHIFT				2
-#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH				0x1
-#define OMAP4430_DLL_OVERRIDE_2_2_MASK				(1 << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_RESET_SHIFT				3
-#define OMAP4430_DLL_RESET_WIDTH				0x1
-#define OMAP4430_DLL_RESET_MASK					(1 << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
- */
 #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
 #define OMAP4430_DPLL_BYP_CLKSEL_WIDTH				0x1
-#define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_CLKSEL_DPLL_CORE */
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH			0x5
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
 #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
 #define OMAP4430_DPLL_CLKOUT_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
-
-/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH			0x7
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
-
-/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH		0x1
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
-#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH			0x3
-#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
-#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH				0x5
-#define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
-#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH				0x5
-#define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_DIV_SHIFT					0
-#define OMAP4430_DPLL_DIV_WIDTH					0x7
 #define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
-
-/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_DIV_0_7_SHIFT				0
-#define OMAP4430_DPLL_DIV_0_7_WIDTH				0x8
 #define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH			0x1
-#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
-
-/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH			0x1
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_EN_SHIFT					0
-#define OMAP4430_DPLL_EN_WIDTH					0x3
 #define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
-#define OMAP4430_DPLL_LPMODE_EN_WIDTH				0x1
 #define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_MULT_SHIFT				8
-#define OMAP4430_DPLL_MULT_WIDTH				0xb
 #define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
-
-/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_MULT_USB_SHIFT				8
-#define OMAP4430_DPLL_MULT_USB_WIDTH				0xc
 #define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_REGM4XEN_SHIFT				11
-#define OMAP4430_DPLL_REGM4XEN_WIDTH				0x1
 #define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_SD_DIV_SHIFT				24
-#define OMAP4430_DPLL_SD_DIV_WIDTH				0x8
 #define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_ACK_SHIFT				13
-#define OMAP4430_DPLL_SSC_ACK_WIDTH				0x1
-#define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH			0x1
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_EN_SHIFT				12
-#define OMAP4430_DPLL_SSC_EN_WIDTH				0x1
-#define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_DSS_DYNDEP_SHIFT				8
-#define OMAP4430_DSS_DYNDEP_WIDTH				0x1
-#define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DSS_STATDEP_SHIFT				8
-#define OMAP4430_DSS_STATDEP_WIDTH				0x1
-#define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_DUCATI_DYNDEP_SHIFT				0
-#define OMAP4430_DUCATI_DYNDEP_WIDTH				0x1
-#define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
-
-/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
-#define OMAP4430_DUCATI_STATDEP_WIDTH				0x1
-#define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_FREQ_UPDATE_WIDTH				0x1
-#define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_FUNC_SHIFT					16
-#define OMAP4430_FUNC_WIDTH					0xc
-#define OMAP4430_FUNC_MASK					(0xfff << 16)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_GFX_DYNDEP_SHIFT				10
-#define OMAP4430_GFX_DYNDEP_WIDTH				0x1
-#define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_GFX_STATDEP_SHIFT				10
-#define OMAP4430_GFX_STATDEP_WIDTH				0x1
-#define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH				0x1
-#define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
- * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
- * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
- * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
- * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
- * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
- * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
- * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
- * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
 #define OMAP4430_IDLEST_SHIFT					16
-#define OMAP4430_IDLEST_WIDTH					0x2
 #define OMAP4430_IDLEST_MASK					(0x3 << 16)
-
-/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ISS_DYNDEP_SHIFT				9
-#define OMAP4430_ISS_DYNDEP_WIDTH				0x1
-#define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
- * CM_TESLA_STATICDEP
- */
-#define OMAP4430_ISS_STATDEP_SHIFT				9
-#define OMAP4430_ISS_STATDEP_WIDTH				0x1
-#define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_IVAHD_DYNDEP_SHIFT				2
-#define OMAP4430_IVAHD_DYNDEP_WIDTH				0x1
-#define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
-#define OMAP4430_IVAHD_STATDEP_WIDTH				0x1
-#define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L3INIT_DYNDEP_SHIFT				7
-#define OMAP4430_L3INIT_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3INIT_STATDEP_SHIFT				7
-#define OMAP4430_L3INIT_STATDEP_WIDTH				0x1
-#define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_L3_1_DYNDEP_SHIFT				5
-#define OMAP4430_L3_1_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3_1_STATDEP_SHIFT				5
-#define OMAP4430_L3_1_STATDEP_WIDTH				0x1
-#define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
- * CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, CM_IVAHD_DYNAMICDEP,
- * CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
- */
-#define OMAP4430_L3_2_DYNDEP_SHIFT				6
-#define OMAP4430_L3_2_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3_2_STATDEP_SHIFT				6
-#define OMAP4430_L3_2_STATDEP_WIDTH				0x1
-#define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
-
-/* Used by CM_L3_1_DYNAMICDEP */
-#define OMAP4430_L4CFG_DYNDEP_SHIFT				12
-#define OMAP4430_L4CFG_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4CFG_STATDEP_SHIFT				12
-#define OMAP4430_L4CFG_STATDEP_WIDTH				0x1
-#define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_L4PER_DYNDEP_SHIFT				13
-#define OMAP4430_L4PER_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4PER_STATDEP_SHIFT				13
-#define OMAP4430_L4PER_STATDEP_WIDTH				0x1
-#define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L4SEC_DYNDEP_SHIFT				14
-#define OMAP4430_L4SEC_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP
- */
 #define OMAP4430_L4SEC_STATDEP_SHIFT				14
-#define OMAP4430_L4SEC_STATDEP_WIDTH				0x1
-#define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
-#define OMAP4430_L4WKUP_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4WKUP_STATDEP_SHIFT				15
-#define OMAP4430_L4WKUP_STATDEP_WIDTH				0x1
-#define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
- */
-#define OMAP4430_MEMIF_DYNDEP_SHIFT				4
-#define OMAP4430_MEMIF_DYNDEP_WIDTH				0x1
-#define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
-#define OMAP4430_MEMIF_STATDEP_WIDTH				0x1
-#define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
-#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH			0x3
-#define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
-#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH			0x7
-#define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
- * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
- * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
- * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
- * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
- * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
- * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
- * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
- * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
 #define OMAP4430_MODULEMODE_SHIFT				0
-#define OMAP4430_MODULEMODE_WIDTH				0x2
 #define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4460_MPU_DYNDEP_SHIFT				19
-#define OMAP4460_MPU_DYNDEP_WIDTH				0x1
-#define OMAP4460_MPU_DYNDEP_MASK				(1 << 19)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
-#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
-
-/* Used by CM_ALWON_USBPHY_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
-#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
-
-/* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
-
-/*
- * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL,
- * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL,
- * CM_WKUP_GPIO1_CLKCTRL
- */
 #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
-
-/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
-#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
-#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
-
-/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
-#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH			0x1
-#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
-#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
-
-/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_XCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
-#define OMAP4430_OVERRIDE_ENABLE_WIDTH				0x1
-#define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_PAD_CLKS_GATE_SHIFT				8
-#define OMAP4430_PAD_CLKS_GATE_WIDTH				0x1
-#define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
-
-/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
-#define OMAP4430_PERF_CURRENT_SHIFT				0
-#define OMAP4430_PERF_CURRENT_WIDTH				0x8
-#define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
-
-/*
- * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
- * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
- * CM_IVA_DVFS_PERF_TESLA
- */
-#define OMAP4430_PERF_REQ_SHIFT					0
-#define OMAP4430_PERF_REQ_WIDTH					0x8
-#define OMAP4430_PERF_REQ_MASK					(0xff << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE1_COMPLETED_SHIFT				0
-#define OMAP4430_PHASE1_COMPLETED_WIDTH				0x1
-#define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
-#define OMAP4430_PHASE2A_COMPLETED_WIDTH			0x1
-#define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
-#define OMAP4430_PHASE2B_COMPLETED_WIDTH			0x1
-#define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
 #define OMAP4430_PMD_STM_MUX_CTRL_WIDTH				0x2
-#define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
 #define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH			0x2
-#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
-
-/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP4430_PRESCAL_SHIFT					0
-#define OMAP4430_PRESCAL_WIDTH					0x6
-#define OMAP4430_PRESCAL_MASK					(0x3f << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_R_RTL_SHIFT					11
-#define OMAP4430_R_RTL_WIDTH					0x5
-#define OMAP4430_R_RTL_MASK					(0x1f << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_SAR_MODE_SHIFT					4
-#define OMAP4430_SAR_MODE_WIDTH					0x1
-#define OMAP4430_SAR_MODE_MASK					(1 << 4)
-
-/* Used by CM_SCALE_FCLK */
 #define OMAP4430_SCALE_FCLK_SHIFT				0
 #define OMAP4430_SCALE_FCLK_WIDTH				0x1
-#define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_SCHEME_SHIFT					30
-#define OMAP4430_SCHEME_WIDTH					0x2
-#define OMAP4430_SCHEME_MASK					(0x3 << 30)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_SDMA_DYNDEP_SHIFT				11
-#define OMAP4430_SDMA_DYNDEP_WIDTH				0x1
-#define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_SDMA_STATDEP_SHIFT				11
-#define OMAP4430_SDMA_STATDEP_WIDTH				0x1
-#define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
-#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH				0x1
-#define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
- */
-#define OMAP4430_STBYST_SHIFT					18
-#define OMAP4430_STBYST_WIDTH					0x1
-#define OMAP4430_STBYST_MASK					(1 << 18)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLK_SHIFT				0
-#define OMAP4430_ST_DPLL_CLK_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH			0x1
-#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
-#define OMAP4430_ST_DPLL_CLKOUT_WIDTH				0x1
-#define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH			0x1
-#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
-#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH				0x1
-#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_MN_BYPASS_SHIFT				8
-#define OMAP4430_ST_MN_BYPASS_WIDTH				0x1
-#define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
-
-/* Used by CM_SYS_CLKSEL */
 #define OMAP4430_SYS_CLKSEL_SHIFT				0
 #define OMAP4430_SYS_CLKSEL_WIDTH				0x3
-#define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_TESLA_DYNDEP_SHIFT				1
-#define OMAP4430_TESLA_DYNDEP_WIDTH				0x1
-#define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
-#define OMAP4430_TESLA_STATDEP_WIDTH				0x1
-#define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP,
- * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_WINDOWSIZE_SHIFT				24
-#define OMAP4430_WINDOWSIZE_WIDTH				0x4
-#define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_X_MAJOR_SHIFT					8
-#define OMAP4430_X_MAJOR_WIDTH					0x3
-#define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_Y_MINOR_SHIFT					0
-#define OMAP4430_Y_MINOR_WIDTH					0x6
-#define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-54xx.h b/arch/arm/mach-omap2/cm-regbits-54xx.h
index e83b8e352b6e..896ae9fc4cfb 100644
--- a/arch/arm/mach-omap2/cm-regbits-54xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-54xx.h
@@ -21,1717 +21,84 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H
 
-/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_MPU_DYNAMICDEP */
-#define OMAP54XX_ABE_DYNDEP_SHIFT					3
-#define OMAP54XX_ABE_DYNDEP_WIDTH					0x1
-#define OMAP54XX_ABE_DYNDEP_MASK					(1 << 3)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_ABE_STATDEP_SHIFT					3
-#define OMAP54XX_ABE_STATDEP_WIDTH					0x1
-#define OMAP54XX_ABE_STATDEP_MASK					(1 << 3)
-
-/*
- * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_IVA,
- * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO1,
- * CM_AUTOIDLE_DPLL_UNIPRO2, CM_AUTOIDLE_DPLL_USB
- */
-#define OMAP54XX_AUTO_DPLL_MODE_SHIFT					0
-#define OMAP54XX_AUTO_DPLL_MODE_WIDTH					0x3
 #define OMAP54XX_AUTO_DPLL_MODE_MASK					(0x7 << 0)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_C2C_DYNDEP_SHIFT					18
-#define OMAP54XX_C2C_DYNDEP_WIDTH					0x1
-#define OMAP54XX_C2C_DYNDEP_MASK					(1 << 18)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP54XX_C2C_STATDEP_SHIFT					18
-#define OMAP54XX_C2C_STATDEP_WIDTH					0x1
-#define OMAP54XX_C2C_STATDEP_MASK					(1 << 18)
-
-/* Used by CM_IPU_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_CAM_DYNDEP_SHIFT					9
-#define OMAP54XX_CAM_DYNDEP_WIDTH					0x1
-#define OMAP54XX_CAM_DYNDEP_MASK					(1 << 9)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP,
- * CM_MPU_STATICDEP
- */
-#define OMAP54XX_CAM_STATDEP_SHIFT					9
-#define OMAP54XX_CAM_STATDEP_WIDTH					0x1
-#define OMAP54XX_CAM_STATDEP_MASK					(1 << 9)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_MASK				(1 << 12)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_MASK				(1 << 9)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_MASK				(1 << 9)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_MASK				(1 << 11)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_SHIFT				13
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_MASK				(1 << 10)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_MASK			(1 << 11)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_MASK				(1 << 12)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_SHIFT		14
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_MASK		(1 << 14)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_CUSTEFUSE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_CUSTEFUSE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_MASK				(1 << 9)
-
-/* Used by CM_DMA_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_DSP_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_MASK				(1 << 10)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_MASK				(1 << 11)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_MASK				(1 << 10)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_MASK				(1 << 10)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_MASK				(1 << 9)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_MASK				(1 << 10)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT			20
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK			(1 << 20)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT			26
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_MASK				(1 << 26)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT			21
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK			(1 << 21)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT			27
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_MASK				(1 << 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_SHIFT			6
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_MASK			(1 << 6)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_SHIFT			7
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_MASK				(1 << 7)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_SHIFT				16
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_MASK				(1 << 16)
-
-/* Used by CM_IPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_MASK				(1 << 8)
-
-/* Used by CM_IVA_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_SHIFT			28
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_MASK			(1 << 28)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_SHIFT			29
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_MASK			(1 << 29)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_SHIFT	11
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_WIDTH	0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_MASK	(1 << 11)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_SHIFT		9
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_MASK		(1 << 9)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_MASK			(1 << 10)
-
-/* Used by CM_L3MAIN1_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3MAIN2_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_MASK			(1 << 9)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_SHIFT		11
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_SHIFT			2
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_MASK			(1 << 2)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_SHIFT				17
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_MASK				(1 << 17)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_SHIFT				18
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_MASK				(1 << 18)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_MASK				(1 << 8)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_MASK				(1 << 14)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_SHIFT			3
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_MASK			(1 << 3)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_SHIFT			4
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_MASK			(1 << 4)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_MASK				(1 << 15)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_SHIFT			17
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_MASK				(1 << 17)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_SHIFT			18
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_MASK				(1 << 18)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_SHIFT			19
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_MASK				(1 << 19)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_SHIFT			19
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_MASK			(1 << 19)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_MASK				(1 << 8)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_SHIFT				15
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_MASK				(1 << 15)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_MASK				(1 << 14)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_MASK				(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_MASK				(1 << 11)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_MASK				(1 << 12)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_SHIFT				13
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT			22
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_MASK				(1 << 22)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT			23
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_MASK				(1 << 23)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT			24
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_MASK				(1 << 24)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_MASK			(1 << 10)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_SHIFT		12
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_SHIFT		5
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_MASK			(1 << 5)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_SHIFT			31
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_MASK			(1 << 31)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT			30
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_MASK				(1 << 30)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT			25
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK			(1 << 25)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_MASK				(1 << 12)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_SHIFT		13
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_MASK		(1 << 13)
-
-/* Used by CM_COREAON_IO_SRCOMP_CLKCTRL, CM_WKUPAON_IO_SRCOMP_CLKCTRL */
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_SHIFT				8
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_WIDTH				0x1
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_MASK					(1 << 8)
-
-/*
- * Used by CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SHIFT						24
 #define OMAP54XX_CLKSEL_WIDTH						0x1
-#define OMAP54XX_CLKSEL_MASK						(1 << 24)
-
-/*
- * Renamed from CLKSEL Used by CM_CLKSEL_ABE_DSS_SYS, CM_CLKSEL_ABE_PLL_REF,
- * CM_CLKSEL_USB_60MHZ, CM_CLKSEL_WKUPAON
- */
 #define OMAP54XX_CLKSEL_0_0_SHIFT					0
 #define OMAP54XX_CLKSEL_0_0_WIDTH					0x1
-#define OMAP54XX_CLKSEL_0_0_MASK					(1 << 0)
-
-/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
-#define OMAP54XX_CLKSEL_0_1_SHIFT					0
-#define OMAP54XX_CLKSEL_0_1_WIDTH					0x2
-#define OMAP54XX_CLKSEL_0_1_MASK					(0x3 << 0)
-
-/* Renamed from CLKSEL Used by CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL */
-#define OMAP54XX_CLKSEL_24_25_SHIFT					24
-#define OMAP54XX_CLKSEL_24_25_WIDTH					0x2
-#define OMAP54XX_CLKSEL_24_25_MASK					(0x3 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_SHIFT				26
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_WIDTH				0x1
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_MASK				(1 << 26)
-
-/* Used by CM_ABE_AESS_CLKCTRL */
 #define OMAP54XX_CLKSEL_AESS_FCLK_SHIFT					24
 #define OMAP54XX_CLKSEL_AESS_FCLK_WIDTH					0x1
-#define OMAP54XX_CLKSEL_AESS_FCLK_MASK					(1 << 24)
-
-/* Used by CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL */
 #define OMAP54XX_CLKSEL_DIV_SHIFT					25
 #define OMAP54XX_CLKSEL_DIV_WIDTH					0x1
-#define OMAP54XX_CLKSEL_DIV_MASK					(1 << 25)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_SHIFT				24
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_WIDTH				0x2
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_MASK				(0x3 << 24)
-
-/* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP54XX_CLKSEL_FCLK_SHIFT					24
 #define OMAP54XX_CLKSEL_FCLK_WIDTH					0x1
-#define OMAP54XX_CLKSEL_FCLK_MASK					(1 << 24)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
 #define OMAP54XX_CLKSEL_GPU_CORE_GCLK_SHIFT				24
 #define OMAP54XX_CLKSEL_GPU_CORE_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_CORE_GCLK_MASK				(1 << 24)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
 #define OMAP54XX_CLKSEL_GPU_HYD_GCLK_SHIFT				25
 #define OMAP54XX_CLKSEL_GPU_HYD_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_HYD_GCLK_MASK				(1 << 25)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_SHIFT				26
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_MASK				(1 << 26)
-
-/*
- * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL,
- * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_INTERNAL_SOURCE_SHIFT				26
 #define OMAP54XX_CLKSEL_INTERNAL_SOURCE_WIDTH				0x2
-#define OMAP54XX_CLKSEL_INTERNAL_SOURCE_MASK				(0x3 << 26)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP54XX_CLKSEL_L3_SHIFT					4
-#define OMAP54XX_CLKSEL_L3_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L3_MASK						(1 << 4)
-
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_CLKSEL_L3_1_1_SHIFT					1
-#define OMAP54XX_CLKSEL_L3_1_1_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L3_1_1_MASK					(1 << 1)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP54XX_CLKSEL_L4_SHIFT					8
-#define OMAP54XX_CLKSEL_L4_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L4_MASK						(1 << 8)
-
-/* Used by CM_EMIF_EMIF1_CLKCTRL */
-#define OMAP54XX_CLKSEL_LL_SHIFT					24
-#define OMAP54XX_CLKSEL_LL_WIDTH					0x1
-#define OMAP54XX_CLKSEL_LL_MASK						(1 << 24)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_CLKSEL_OPP_SHIFT					0
 #define OMAP54XX_CLKSEL_OPP_WIDTH					0x2
-#define OMAP54XX_CLKSEL_OPP_MASK					(0x3 << 0)
-
-/* Renamed from CLKSEL_OPP Used by CM_L3INIT_UNIPRO2_CLKCTRL */
-#define OMAP54XX_CLKSEL_OPP_24_24_SHIFT					24
-#define OMAP54XX_CLKSEL_OPP_24_24_WIDTH					0x1
-#define OMAP54XX_CLKSEL_OPP_24_24_MASK					(1 << 24)
-
-/*
- * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL,
- * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SOURCE_SHIFT					24
 #define OMAP54XX_CLKSEL_SOURCE_WIDTH					0x2
-#define OMAP54XX_CLKSEL_SOURCE_MASK					(0x3 << 24)
-
-/*
- * Renamed from CLKSEL_SOURCE Used by CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_SHIFT			24
 #define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_WIDTH			0x1
-#define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_MASK				(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_CLKSEL_UTMI_P1_SHIFT					24
 #define OMAP54XX_CLKSEL_UTMI_P1_WIDTH					0x1
-#define OMAP54XX_CLKSEL_UTMI_P1_MASK					(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_CLKSEL_UTMI_P2_SHIFT					25
 #define OMAP54XX_CLKSEL_UTMI_P2_WIDTH					0x1
-#define OMAP54XX_CLKSEL_UTMI_P2_MASK					(1 << 25)
-
-/*
- * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER,
- * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER,
- * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE,
- * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE,
- * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE, CM_DIV_M2_DPLL_ABE,
- * CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER,
- * CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2, CM_DIV_M2_DPLL_USB,
- * CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER
- */
-#define OMAP54XX_CLKST_SHIFT						9
-#define OMAP54XX_CLKST_WIDTH						0x1
-#define OMAP54XX_CLKST_MASK						(1 << 9)
-
-/*
- * Used by CM_ABE_CLKSTCTRL, CM_C2C_CLKSTCTRL, CM_CAM_CLKSTCTRL,
- * CM_COREAON_CLKSTCTRL, CM_CUSTEFUSE_CLKSTCTRL, CM_DMA_CLKSTCTRL,
- * CM_DSP_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_EMIF_CLKSTCTRL, CM_EMU_CLKSTCTRL,
- * CM_GPU_CLKSTCTRL, CM_IPU_CLKSTCTRL, CM_IVA_CLKSTCTRL, CM_L3INIT_CLKSTCTRL,
- * CM_L3INSTR_CLKSTCTRL, CM_L3MAIN1_CLKSTCTRL, CM_L3MAIN2_CLKSTCTRL,
- * CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL,
- * CM_MIPIEXT_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_WKUPAON_CLKSTCTRL
- */
-#define OMAP54XX_CLKTRCTRL_SHIFT					0
-#define OMAP54XX_CLKTRCTRL_WIDTH					0x2
-#define OMAP54XX_CLKTRCTRL_MASK						(0x3 << 0)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER */
-#define OMAP54XX_CLKX2ST_SHIFT						11
-#define OMAP54XX_CLKX2ST_WIDTH						0x1
-#define OMAP54XX_CLKX2ST_MASK						(1 << 11)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_COREAON_DYNDEP_SHIFT					16
-#define OMAP54XX_COREAON_DYNDEP_WIDTH					0x1
-#define OMAP54XX_COREAON_DYNDEP_MASK					(1 << 16)
-
-/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_COREAON_STATDEP_SHIFT					16
-#define OMAP54XX_COREAON_STATDEP_WIDTH					0x1
-#define OMAP54XX_COREAON_STATDEP_MASK					(1 << 16)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_CUSTEFUSE_DYNDEP_SHIFT					17
-#define OMAP54XX_CUSTEFUSE_DYNDEP_WIDTH					0x1
-#define OMAP54XX_CUSTEFUSE_DYNDEP_MASK					(1 << 17)
-
-/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_CUSTEFUSE_STATDEP_SHIFT				17
-#define OMAP54XX_CUSTEFUSE_STATDEP_WIDTH				0x1
-#define OMAP54XX_CUSTEFUSE_STATDEP_MASK					(1 << 17)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_CUSTOM_SHIFT						6
-#define OMAP54XX_CUSTOM_WIDTH						0x2
-#define OMAP54XX_CUSTOM_MASK						(0x3 << 6)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DCC_EN_SHIFT						22
-#define OMAP54XX_DCC_EN_WIDTH						0x1
-#define OMAP54XX_DCC_EN_MASK						(1 << 22)
-
-/*
- * Used by CM_CORE_AON_DEBUG_CM_CORE_AON_FD_TRANS,
- * CM_CORE_AON_DEBUG_DSS_FD_TRANS, CM_CORE_AON_DEBUG_EMIF_FD_TRANS,
- * CM_CORE_AON_DEBUG_L4SEC_FD_TRANS
- */
-#define OMAP54XX_CM_DEBUG_OUT_SHIFT					0
-#define OMAP54XX_CM_DEBUG_OUT_WIDTH					0xd
-#define OMAP54XX_CM_DEBUG_OUT_MASK					(0x1fff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS,
- * CM_CORE_AON_DEBUG_L3INIT_FD_TRANS, CM_CORE_AON_DEBUG_L4PER_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_31_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_31_WIDTH					0x20
-#define OMAP54XX_DEBUG_OUT_0_31_MASK					(0xffffffff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_C2C_FD_TRANS,
- * CM_CORE_AON_DEBUG_COREAON_FD_TRANS, CM_CORE_AON_DEBUG_L4CFG_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_8_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_8_WIDTH					0x9
-#define OMAP54XX_DEBUG_OUT_0_8_MASK					(0x1ff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CUSTEFUSE_FD_TRANS,
- * CM_CORE_AON_DEBUG_DMA_FD_TRANS, CM_CORE_AON_DEBUG_L3MAIN1_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_4_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_4_WIDTH					0x5
-#define OMAP54XX_DEBUG_OUT_0_4_MASK					(0x1f << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_DSP_FD_TRANS,
- * CM_CORE_AON_DEBUG_IPU_FD_TRANS, CM_CORE_AON_DEBUG_MPU_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_5_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_5_WIDTH					0x6
-#define OMAP54XX_DEBUG_OUT_0_5_MASK					(0x3f << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CAM_FD_TRANS,
- * CM_CORE_AON_DEBUG_MIPIEXT_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_10_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_10_WIDTH					0xb
-#define OMAP54XX_DEBUG_OUT_0_10_MASK					(0x7ff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_IVA_FD_TRANS,
- * CM_CORE_AON_DEBUG_L3MAIN2_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_6_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_6_WIDTH					0x7
-#define OMAP54XX_DEBUG_OUT_0_6_MASK					(0x7f << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_19_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_19_WIDTH					0x14
-#define OMAP54XX_DEBUG_OUT_0_19_MASK					(0xfffff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_GPU_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_9_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_9_WIDTH					0xa
-#define OMAP54XX_DEBUG_OUT_0_9_MASK					(0x3ff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INIT_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_26_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_26_WIDTH					0x1b
-#define OMAP54XX_DEBUG_OUT_0_26_MASK					(0x7ffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INSTR_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_13_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_13_WIDTH					0xe
-#define OMAP54XX_DEBUG_OUT_0_13_MASK					(0x3fff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L4PER_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_21_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_21_WIDTH					0x16
-#define OMAP54XX_DEBUG_OUT_0_21_MASK					(0x3fffff << 0)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU,
- * CM_SSC_DELTAMSTEP_DPLL_PER
- */
-#define OMAP54XX_DELTAMSTEP_SHIFT					0
-#define OMAP54XX_DELTAMSTEP_WIDTH					0x14
-#define OMAP54XX_DELTAMSTEP_MASK					(0xfffff << 0)
-
-/*
- * Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_UNIPRO1,
- * CM_SSC_DELTAMSTEP_DPLL_UNIPRO2, CM_SSC_DELTAMSTEP_DPLL_USB
- */
-#define OMAP54XX_DELTAMSTEP_0_20_SHIFT					0
-#define OMAP54XX_DELTAMSTEP_0_20_WIDTH					0x15
-#define OMAP54XX_DELTAMSTEP_0_20_MASK					(0x1fffff << 0)
-
-/*
- * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER,
- * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER,
- * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE,
- * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE,
- * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE
- */
-#define OMAP54XX_DIVHS_SHIFT						0
-#define OMAP54XX_DIVHS_WIDTH						0x6
 #define OMAP54XX_DIVHS_MASK						(0x3f << 0)
-
-/*
- * Renamed from DIVHS Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER
- */
-#define OMAP54XX_DIVHS_0_4_SHIFT					0
-#define OMAP54XX_DIVHS_0_4_WIDTH					0x5
 #define OMAP54XX_DIVHS_0_4_MASK						(0x1f << 0)
-
-/*
- * Renamed from DIVHS Used by CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2,
- * CM_DIV_M2_DPLL_USB
- */
-#define OMAP54XX_DIVHS_0_6_SHIFT					0
-#define OMAP54XX_DIVHS_0_6_WIDTH					0x7
 #define OMAP54XX_DIVHS_0_6_MASK						(0x7f << 0)
-
-/* Used by CM_DLL_CTRL */
-#define OMAP54XX_DLL_OVERRIDE_SHIFT					0
-#define OMAP54XX_DLL_OVERRIDE_WIDTH					0x1
-#define OMAP54XX_DLL_OVERRIDE_MASK					(1 << 0)
-
-/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DLL_OVERRIDE_2_2_SHIFT					2
-#define OMAP54XX_DLL_OVERRIDE_2_2_WIDTH					0x1
-#define OMAP54XX_DLL_OVERRIDE_2_2_MASK					(1 << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DLL_RESET_SHIFT					3
-#define OMAP54XX_DLL_RESET_WIDTH					0x1
-#define OMAP54XX_DLL_RESET_MASK						(1 << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_BYP_CLKSEL_SHIFT					23
-#define OMAP54XX_DPLL_BYP_CLKSEL_WIDTH					0x1
-#define OMAP54XX_DPLL_BYP_CLKSEL_MASK					(1 << 23)
-
-/* Used by CM_CLKSEL_DPLL_CORE */
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_SHIFT				20
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_WIDTH				0x1
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_MASK				(1 << 20)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DPLL_CORE_DPLL_EN_SHIFT				8
-#define OMAP54XX_DPLL_CORE_DPLL_EN_WIDTH				0x3
-#define OMAP54XX_DPLL_CORE_DPLL_EN_MASK					(0x7 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_DPLL_CORE_H12_DIV_SHIFT				2
-#define OMAP54XX_DPLL_CORE_H12_DIV_WIDTH				0x6
-#define OMAP54XX_DPLL_CORE_H12_DIV_MASK					(0x3f << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DPLL_CORE_M2_DIV_SHIFT					11
-#define OMAP54XX_DPLL_CORE_M2_DIV_WIDTH					0x5
-#define OMAP54XX_DPLL_CORE_M2_DIV_MASK					(0x1f << 11)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER
- */
-#define OMAP54XX_DPLL_DIV_SHIFT						0
-#define OMAP54XX_DPLL_DIV_WIDTH						0x7
 #define OMAP54XX_DPLL_DIV_MASK						(0x7f << 0)
-
-/*
- * Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_DIV_0_7_SHIFT					0
-#define OMAP54XX_DPLL_DIV_0_7_WIDTH					0x8
-#define OMAP54XX_DPLL_DIV_0_7_MASK					(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_SHIFT				8
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_WIDTH				0x1
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_MASK				(1 << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_EN_SHIFT						0
-#define OMAP54XX_DPLL_EN_WIDTH						0x3
 #define OMAP54XX_DPLL_EN_MASK						(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_LPMODE_EN_SHIFT					10
-#define OMAP54XX_DPLL_LPMODE_EN_WIDTH					0x1
 #define OMAP54XX_DPLL_LPMODE_EN_MASK					(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER
- */
-#define OMAP54XX_DPLL_MULT_SHIFT					8
-#define OMAP54XX_DPLL_MULT_WIDTH					0xb
 #define OMAP54XX_DPLL_MULT_MASK						(0x7ff << 8)
-
-/*
- * Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_MULT_UNIPRO1_SHIFT				8
-#define OMAP54XX_DPLL_MULT_UNIPRO1_WIDTH				0xc
-#define OMAP54XX_DPLL_MULT_UNIPRO1_MASK					(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_REGM4XEN_SHIFT					11
-#define OMAP54XX_DPLL_REGM4XEN_WIDTH					0x1
 #define OMAP54XX_DPLL_REGM4XEN_MASK					(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */
-#define OMAP54XX_DPLL_SD_DIV_SHIFT					24
-#define OMAP54XX_DPLL_SD_DIV_WIDTH					0x8
 #define OMAP54XX_DPLL_SD_DIV_MASK					(0xff << 24)
-
-/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */
-#define OMAP54XX_DPLL_SELFREQDCO_SHIFT					21
-#define OMAP54XX_DPLL_SELFREQDCO_WIDTH					0x1
-#define OMAP54XX_DPLL_SELFREQDCO_MASK					(1 << 21)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_ACK_SHIFT					13
-#define OMAP54XX_DPLL_SSC_ACK_WIDTH					0x1
-#define OMAP54XX_DPLL_SSC_ACK_MASK					(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_SHIFT				14
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_WIDTH				0x1
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_MASK				(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_EN_SHIFT					12
-#define OMAP54XX_DPLL_SSC_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_SSC_EN_MASK					(1 << 12)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_DSP_DYNDEP_SHIFT					1
-#define OMAP54XX_DSP_DYNDEP_WIDTH					0x1
-#define OMAP54XX_DSP_DYNDEP_MASK					(1 << 1)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_DSP_STATDEP_SHIFT					1
-#define OMAP54XX_DSP_STATDEP_WIDTH					0x1
-#define OMAP54XX_DSP_STATDEP_MASK					(1 << 1)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_DSS_DYNDEP_SHIFT					8
-#define OMAP54XX_DSS_DYNDEP_WIDTH					0x1
-#define OMAP54XX_DSS_DYNDEP_MASK					(1 << 8)
-
-/* Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_DSS_STATDEP_SHIFT					8
-#define OMAP54XX_DSS_STATDEP_WIDTH					0x1
-#define OMAP54XX_DSS_STATDEP_MASK					(1 << 8)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MIPIEXT_DYNAMICDEP, CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_EMIF_DYNDEP_SHIFT					4
-#define OMAP54XX_EMIF_DYNDEP_WIDTH					0x1
-#define OMAP54XX_EMIF_DYNDEP_MASK					(1 << 4)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_EMIF_STATDEP_SHIFT					4
-#define OMAP54XX_EMIF_STATDEP_WIDTH					0x1
-#define OMAP54XX_EMIF_STATDEP_MASK					(1 << 4)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_FREQ_UPDATE_SHIFT					0
-#define OMAP54XX_FREQ_UPDATE_WIDTH					0x1
-#define OMAP54XX_FREQ_UPDATE_MASK					(1 << 0)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_FUNC_SHIFT						16
-#define OMAP54XX_FUNC_WIDTH						0xc
-#define OMAP54XX_FUNC_MASK						(0xfff << 16)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_GPMC_FREQ_UPDATE_SHIFT					0
-#define OMAP54XX_GPMC_FREQ_UPDATE_WIDTH					0x1
-#define OMAP54XX_GPMC_FREQ_UPDATE_MASK					(1 << 0)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_GPU_DYNDEP_SHIFT					10
-#define OMAP54XX_GPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_GPU_DYNDEP_MASK					(1 << 10)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_GPU_STATDEP_SHIFT					10
-#define OMAP54XX_GPU_STATDEP_WIDTH					0x1
-#define OMAP54XX_GPU_STATDEP_MASK					(1 << 10)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL,
- * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL,
- * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL,
- * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL,
- * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL,
- * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL,
- * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL,
- * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL,
- * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL,
- * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL,
- * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL,
- * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL,
- * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL,
- * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL,
- * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL,
- * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL,
- * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL,
- * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL,
- * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL,
- * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL,
- * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL,
- * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL,
- * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL,
- * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL,
- * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL,
- * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL
- */
-#define OMAP54XX_IDLEST_SHIFT						16
-#define OMAP54XX_IDLEST_WIDTH						0x2
-#define OMAP54XX_IDLEST_MASK						(0x3 << 16)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_IPU_DYNDEP_SHIFT					0
-#define OMAP54XX_IPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_IPU_DYNDEP_MASK					(1 << 0)
-
-/* Used by CM_DMA_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_IPU_STATDEP_SHIFT					0
-#define OMAP54XX_IPU_STATDEP_WIDTH					0x1
-#define OMAP54XX_IPU_STATDEP_MASK					(1 << 0)
-
-/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_IVA_DYNDEP_SHIFT					2
-#define OMAP54XX_IVA_DYNDEP_WIDTH					0x1
-#define OMAP54XX_IVA_DYNDEP_MASK					(1 << 2)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_IVA_STATDEP_SHIFT					2
-#define OMAP54XX_IVA_STATDEP_WIDTH					0x1
-#define OMAP54XX_IVA_STATDEP_MASK					(1 << 2)
-
-/* Used by CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_L3INIT_DYNDEP_SHIFT					7
-#define OMAP54XX_L3INIT_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3INIT_DYNDEP_MASK					(1 << 7)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3INIT_STATDEP_SHIFT					7
-#define OMAP54XX_L3INIT_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3INIT_STATDEP_MASK					(1 << 7)
-
-/*
- * Used by CM_DSP_DYNAMICDEP, CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
- * CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_L3MAIN1_DYNDEP_SHIFT					5
-#define OMAP54XX_L3MAIN1_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN1_DYNDEP_MASK					(1 << 5)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3MAIN1_STATDEP_SHIFT					5
-#define OMAP54XX_L3MAIN1_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN1_STATDEP_MASK					(1 << 5)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_CAM_DYNAMICDEP, CM_DMA_DYNAMICDEP,
- * CM_DSS_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GPU_DYNAMICDEP, CM_IPU_DYNAMICDEP,
- * CM_IVA_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP
- */
-#define OMAP54XX_L3MAIN2_DYNDEP_SHIFT					6
-#define OMAP54XX_L3MAIN2_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN2_DYNDEP_MASK					(1 << 6)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3MAIN2_STATDEP_SHIFT					6
-#define OMAP54XX_L3MAIN2_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN2_STATDEP_MASK					(1 << 6)
-
-/* Used by CM_L3MAIN1_DYNAMICDEP */
-#define OMAP54XX_L4CFG_DYNDEP_SHIFT					12
-#define OMAP54XX_L4CFG_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4CFG_DYNDEP_MASK					(1 << 12)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4CFG_STATDEP_SHIFT					12
-#define OMAP54XX_L4CFG_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4CFG_STATDEP_MASK					(1 << 12)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_L4PER_DYNDEP_SHIFT					13
-#define OMAP54XX_L4PER_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4PER_DYNDEP_MASK					(1 << 13)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4PER_STATDEP_SHIFT					13
-#define OMAP54XX_L4PER_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4PER_STATDEP_MASK					(1 << 13)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_L4SEC_DYNDEP_SHIFT					14
-#define OMAP54XX_L4SEC_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4SEC_DYNDEP_MASK					(1 << 14)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4SEC_STATDEP_SHIFT					14
-#define OMAP54XX_L4SEC_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4SEC_STATDEP_MASK					(1 << 14)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_MIPIEXT_DYNDEP_SHIFT					21
-#define OMAP54XX_MIPIEXT_DYNDEP_WIDTH					0x1
-#define OMAP54XX_MIPIEXT_DYNDEP_MASK					(1 << 21)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP54XX_MIPIEXT_STATDEP_SHIFT					21
-#define OMAP54XX_MIPIEXT_STATDEP_WIDTH					0x1
-#define OMAP54XX_MIPIEXT_STATDEP_MASK					(1 << 21)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP54XX_MODFREQDIV_EXPONENT_SHIFT				8
-#define OMAP54XX_MODFREQDIV_EXPONENT_WIDTH				0x3
-#define OMAP54XX_MODFREQDIV_EXPONENT_MASK				(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP54XX_MODFREQDIV_MANTISSA_SHIFT				0
-#define OMAP54XX_MODFREQDIV_MANTISSA_WIDTH				0x7
-#define OMAP54XX_MODFREQDIV_MANTISSA_MASK				(0x7f << 0)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL,
- * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL,
- * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL,
- * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL,
- * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL,
- * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL,
- * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL,
- * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL,
- * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL,
- * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL,
- * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL,
- * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL,
- * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL,
- * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL,
- * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL,
- * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL,
- * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL,
- * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL,
- * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL,
- * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL,
- * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL,
- * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL,
- * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL,
- * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL,
- * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL,
- * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL
- */
-#define OMAP54XX_MODULEMODE_SHIFT					0
-#define OMAP54XX_MODULEMODE_WIDTH					0x2
-#define OMAP54XX_MODULEMODE_MASK					(0x3 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_MPU_DYNDEP_SHIFT					19
-#define OMAP54XX_MPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_MPU_DYNDEP_MASK					(1 << 19)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_32KHZ_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_MASK				(1 << 11)
-
-/* Renamed from OPTFCLKEN_32KHZ_CLK Used by CM_L3INIT_MMC1_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_48MHZ_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_MASK				(1 << 9)
-
-/* Used by CM_COREAON_USB_PHY_CORE_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_CLK32K_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_CLK32K_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_CLK32K_MASK					(1 << 8)
-
-/* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_CTRLCLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_CTRLCLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_CTRLCLK_MASK					(1 << 8)
-
-/*
- * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL,
- * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL,
- * CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL, CM_WKUPAON_GPIO1_CLKCTRL
- */
 #define OMAP54XX_OPTFCLKEN_DBCLK_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_DBCLK_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_DBCLK_MASK					(1 << 8)
-
-/* Used by CM_EMIF_EMIF_DLL_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_MASK					(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_DSSCLK_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_DSSCLK_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_DSSCLK_MASK					(1 << 8)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK0_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_FCLK0_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK0_MASK					(1 << 8)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK1_SHIFT					9
-#define OMAP54XX_OPTFCLKEN_FCLK1_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK1_MASK					(1 << 9)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK2_SHIFT					10
-#define OMAP54XX_OPTFCLKEN_FCLK2_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK2_MASK					(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_SHIFT				15
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_MASK				(1 << 15)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT			13
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_MASK				(1 << 13)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT			14
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_SHIFT			7
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_MASK				(1 << 7)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_MASK				(1 << 11)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT				12
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_MASK				(1 << 12)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_SHIFT				6
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_MASK				(1 << 6)
-
-/* Used by CM_L3INIT_USB_OTG_SS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_REFCLK960M_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_REFCLK960M_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_REFCLK960M_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_SATA_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_REF_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_REF_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_REF_CLK_MASK					(1 << 8)
-
-/* Used by CM_WKUPAON_SCRM_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_MASK				(1 << 8)
-
-/* Used by CM_WKUPAON_SCRM_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_MASK				(1 << 9)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_MASK				(1 << 11)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_SYS_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SYS_CLK_MASK					(1 << 10)
-
-/* Used by CM_MIPIEXT_LLI_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_TXPHY_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_MASK				(1 << 8)
-
-/* Used by CM_MIPIEXT_LLI_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_MASK				(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_MASK				(1 << 10)
-
-/* Used by CM_CORE_AON_DEBUG_OUT, CM_CORE_DEBUG_OUT */
-#define OMAP54XX_OUTPUT_SHIFT						0
-#define OMAP54XX_OUTPUT_WIDTH						0x20
-#define OMAP54XX_OUTPUT_MASK						(0xffffffff << 0)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_PAD_CLKS_GATE_SHIFT					8
-#define OMAP54XX_PAD_CLKS_GATE_WIDTH					0x1
-#define OMAP54XX_PAD_CLKS_GATE_MASK					(1 << 8)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE1_COMPLETED_SHIFT					0
-#define OMAP54XX_PHASE1_COMPLETED_WIDTH					0x1
-#define OMAP54XX_PHASE1_COMPLETED_MASK					(1 << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE2A_COMPLETED_SHIFT				1
-#define OMAP54XX_PHASE2A_COMPLETED_WIDTH				0x1
-#define OMAP54XX_PHASE2A_COMPLETED_MASK					(1 << 1)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE2B_COMPLETED_SHIFT				2
-#define OMAP54XX_PHASE2B_COMPLETED_WIDTH				0x1
-#define OMAP54XX_PHASE2B_COMPLETED_MASK					(1 << 2)
-
-/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP54XX_PRESCAL_SHIFT						0
-#define OMAP54XX_PRESCAL_WIDTH						0x6
-#define OMAP54XX_PRESCAL_MASK						(0x3f << 0)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_R_RTL_SHIFT						11
-#define OMAP54XX_R_RTL_WIDTH						0x5
-#define OMAP54XX_R_RTL_MASK						(0x1f << 11)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_TLL_HS_CLKCTRL */
-#define OMAP54XX_SAR_MODE_SHIFT						4
-#define OMAP54XX_SAR_MODE_WIDTH						0x1
-#define OMAP54XX_SAR_MODE_MASK						(1 << 4)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_SCHEME_SHIFT						30
-#define OMAP54XX_SCHEME_WIDTH						0x2
-#define OMAP54XX_SCHEME_MASK						(0x3 << 30)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_SDMA_DYNDEP_SHIFT					11
-#define OMAP54XX_SDMA_DYNDEP_WIDTH					0x1
-#define OMAP54XX_SDMA_DYNDEP_MASK					(1 << 11)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_SDMA_STATDEP_SHIFT					11
-#define OMAP54XX_SDMA_STATDEP_WIDTH					0x1
-#define OMAP54XX_SDMA_STATDEP_MASK					(1 << 11)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL0_SHIFT						0
-#define OMAP54XX_SEL0_WIDTH						0x7
-#define OMAP54XX_SEL0_MASK						(0x7f << 0)
-
-/* Renamed from SEL0 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL0_0_7_SHIFT						0
-#define OMAP54XX_SEL0_0_7_WIDTH						0x8
-#define OMAP54XX_SEL0_0_7_MASK						(0xff << 0)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL1_SHIFT						8
-#define OMAP54XX_SEL1_WIDTH						0x7
-#define OMAP54XX_SEL1_MASK						(0x7f << 8)
-
-/* Renamed from SEL1 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_SHIFT				8
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_MASK				(0xff << 8)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL2_SHIFT						16
-#define OMAP54XX_SEL2_WIDTH						0x7
-#define OMAP54XX_SEL2_MASK						(0x7f << 16)
-
-/* Renamed from SEL2 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_SHIFT				16
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_MASK				(0xff << 16)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL3_SHIFT						24
-#define OMAP54XX_SEL3_WIDTH						0x7
-#define OMAP54XX_SEL3_MASK						(0x7f << 24)
-
-/* Renamed from SEL3 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_SHIFT				24
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_MASK				(0xff << 24)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_SLIMBUS1_CLK_GATE_SHIFT				10
-#define OMAP54XX_SLIMBUS1_CLK_GATE_WIDTH				0x1
-#define OMAP54XX_SLIMBUS1_CLK_GATE_MASK					(1 << 10)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_C2C_C2C_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL, CM_DSP_DSP_CLKCTRL,
- * CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL, CM_IVA_IVA_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_IEEE1500_2_OCP_CLKCTRL,
- * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_SATA_CLKCTRL,
- * CM_L3INIT_UNIPRO2_CLKCTRL, CM_L3INIT_USB_HOST_HS_CLKCTRL,
- * CM_L3INIT_USB_OTG_SS_CLKCTRL, CM_L4SEC_DMA_CRYPTO_CLKCTRL,
- * CM_MIPIEXT_LLI_CLKCTRL, CM_MPU_MPU_CLKCTRL
- */
-#define OMAP54XX_STBYST_SHIFT						18
-#define OMAP54XX_STBYST_WIDTH						0x1
-#define OMAP54XX_STBYST_MASK						(1 << 18)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_CLK_SHIFT					0
-#define OMAP54XX_ST_DPLL_CLK_WIDTH					0x1
 #define OMAP54XX_ST_DPLL_CLK_MASK					(1 << 0)
-
-/*
- * Used by CM_CLKDCOLDO_DPLL_UNIPRO1, CM_CLKDCOLDO_DPLL_UNIPRO2,
- * CM_CLKDCOLDO_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_SHIFT				9
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_WIDTH				0x1
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_MASK					(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_INIT_SHIFT					4
-#define OMAP54XX_ST_DPLL_INIT_WIDTH					0x1
-#define OMAP54XX_ST_DPLL_INIT_MASK					(1 << 4)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_MODE_SHIFT					1
-#define OMAP54XX_ST_DPLL_MODE_WIDTH					0x3
-#define OMAP54XX_ST_DPLL_MODE_MASK					(0x7 << 1)
-
-/* Used by CM_CLKSEL_SYS */
 #define OMAP54XX_SYS_CLKSEL_SHIFT					0
 #define OMAP54XX_SYS_CLKSEL_WIDTH					0x3
-#define OMAP54XX_SYS_CLKSEL_MASK					(0x7 << 0)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_DSP_DYNAMICDEP, CM_EMU_DYNAMICDEP,
- * CM_IPU_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_WINDOWSIZE_SHIFT					24
-#define OMAP54XX_WINDOWSIZE_WIDTH					0x4
-#define OMAP54XX_WINDOWSIZE_MASK					(0xf << 24)
-
-/* Used by CM_L3MAIN1_DYNAMICDEP */
-#define OMAP54XX_WKUPAON_DYNDEP_SHIFT					15
-#define OMAP54XX_WKUPAON_DYNDEP_WIDTH					0x1
-#define OMAP54XX_WKUPAON_DYNDEP_MASK					(1 << 15)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_WKUPAON_STATDEP_SHIFT					15
-#define OMAP54XX_WKUPAON_STATDEP_WIDTH					0x1
-#define OMAP54XX_WKUPAON_STATDEP_MASK					(1 << 15)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_X_MAJOR_SHIFT						8
-#define OMAP54XX_X_MAJOR_WIDTH						0x3
-#define OMAP54XX_X_MAJOR_MASK						(0x7 << 8)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_Y_MINOR_SHIFT						0
-#define OMAP54XX_Y_MINOR_WIDTH						0x6
-#define OMAP54XX_Y_MINOR_MASK						(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-7xx.h b/arch/arm/mach-omap2/cm-regbits-7xx.h
new file mode 100644
index 000000000000..ad8f81ce9b16
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-7xx.h
@@ -0,0 +1,51 @@
+/*
+ * DRA7xx Clock Management register bits
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+
+#define DRA7XX_ATL_STATDEP_SHIFT				30
+#define DRA7XX_CAM_STATDEP_SHIFT				9
+#define DRA7XX_DSP1_STATDEP_SHIFT				1
+#define DRA7XX_DSP2_STATDEP_SHIFT				18
+#define DRA7XX_DSS_STATDEP_SHIFT				8
+#define DRA7XX_EMIF_STATDEP_SHIFT				4
+#define DRA7XX_EVE1_STATDEP_SHIFT				19
+#define DRA7XX_EVE2_STATDEP_SHIFT				20
+#define DRA7XX_EVE3_STATDEP_SHIFT				21
+#define DRA7XX_EVE4_STATDEP_SHIFT				22
+#define DRA7XX_GMAC_STATDEP_SHIFT				25
+#define DRA7XX_GPU_STATDEP_SHIFT				10
+#define DRA7XX_IPU1_STATDEP_SHIFT				23
+#define DRA7XX_IPU2_STATDEP_SHIFT				0
+#define DRA7XX_IPU_STATDEP_SHIFT				24
+#define DRA7XX_IVA_STATDEP_SHIFT				2
+#define DRA7XX_L3INIT_STATDEP_SHIFT				7
+#define DRA7XX_L3MAIN1_STATDEP_SHIFT				5
+#define DRA7XX_L4CFG_STATDEP_SHIFT				12
+#define DRA7XX_L4PER2_STATDEP_SHIFT				26
+#define DRA7XX_L4PER3_STATDEP_SHIFT				27
+#define DRA7XX_L4PER_STATDEP_SHIFT				13
+#define DRA7XX_L4SEC_STATDEP_SHIFT				14
+#define DRA7XX_PCIE_STATDEP_SHIFT				29
+#define DRA7XX_VPE_STATDEP_SHIFT				28
+#define DRA7XX_WKUPAON_STATDEP_SHIFT				15
+#endif
diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h
new file mode 100644
index 000000000000..ca6fa1febaac
--- /dev/null
+++ b/arch/arm/mach-omap2/cm1_7xx.h
@@ -0,0 +1,324 @@
+/*
+ * DRA7xx CM1 instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
+
+#include "cm_44xx_54xx.h"
+
+/* CM1 base address */
+#define DRA7XX_CM_CORE_AON_BASE		0x4a005000
+
+#define DRA7XX_CM_CORE_AON_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE + (inst) + (reg))
+
+/* CM_CORE_AON instances */
+#define DRA7XX_CM_CORE_AON_OCP_SOCKET_INST	0x0000
+#define DRA7XX_CM_CORE_AON_CKGEN_INST		0x0100
+#define DRA7XX_CM_CORE_AON_MPU_INST		0x0300
+#define DRA7XX_CM_CORE_AON_DSP1_INST		0x0400
+#define DRA7XX_CM_CORE_AON_IPU_INST		0x0500
+#define DRA7XX_CM_CORE_AON_DSP2_INST		0x0600
+#define DRA7XX_CM_CORE_AON_EVE1_INST		0x0640
+#define DRA7XX_CM_CORE_AON_EVE2_INST		0x0680
+#define DRA7XX_CM_CORE_AON_EVE3_INST		0x06c0
+#define DRA7XX_CM_CORE_AON_EVE4_INST		0x0700
+#define DRA7XX_CM_CORE_AON_RTC_INST		0x0740
+#define DRA7XX_CM_CORE_AON_VPE_INST		0x0760
+#define DRA7XX_CM_CORE_AON_RESTORE_INST		0x0e00
+#define DRA7XX_CM_CORE_AON_INSTR_INST		0x0f00
+
+/* CM_CORE_AON clockdomain register offsets (from instance start) */
+#define DRA7XX_CM_CORE_AON_MPU_MPU_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_DSP1_DSP1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_IPU_IPU1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS	0x0040
+#define DRA7XX_CM_CORE_AON_DSP2_DSP2_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE1_EVE1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE2_EVE2_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE3_EVE3_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE4_EVE4_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_RTC_RTC_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_VPE_VPE_CDOFFS	0x0000
+
+/* CM_CORE_AON */
+
+/* CM_CORE_AON.OCP_SOCKET_CM_CORE_AON register offsets */
+#define DRA7XX_REVISION_CM_CORE_AON_OFFSET		0x0000
+#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL_OFFSET	0x0040
+#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_CM_CORE_AON_DEBUG_OUT_OFFSET		0x00ec
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG0_OFFSET		0x00f0
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG1_OFFSET		0x00f4
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG2_OFFSET		0x00f8
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG3_OFFSET		0x00fc
+
+/* CM_CORE_AON.CKGEN_CM_CORE_AON register offsets */
+#define DRA7XX_CM_CLKSEL_CORE_OFFSET			0x0000
+#define DRA7XX_CM_CLKSEL_CORE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKSEL_ABE_OFFSET			0x0008
+#define DRA7XX_CM_CLKSEL_ABE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0008)
+#define DRA7XX_CM_DLL_CTRL_OFFSET			0x0010
+#define DRA7XX_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
+#define DRA7XX_CM_CLKMODE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0020)
+#define DRA7XX_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
+#define DRA7XX_CM_IDLEST_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0024)
+#define DRA7XX_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
+#define DRA7XX_CM_AUTOIDLE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0028)
+#define DRA7XX_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
+#define DRA7XX_CM_CLKSEL_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x002c)
+#define DRA7XX_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
+#define DRA7XX_CM_DIV_M2_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0030)
+#define DRA7XX_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
+#define DRA7XX_CM_DIV_M3_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0034)
+#define DRA7XX_CM_DIV_H11_DPLL_CORE_OFFSET		0x0038
+#define DRA7XX_CM_DIV_H11_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0038)
+#define DRA7XX_CM_DIV_H12_DPLL_CORE_OFFSET		0x003c
+#define DRA7XX_CM_DIV_H12_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x003c)
+#define DRA7XX_CM_DIV_H13_DPLL_CORE_OFFSET		0x0040
+#define DRA7XX_CM_DIV_H13_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_DIV_H14_DPLL_CORE_OFFSET		0x0044
+#define DRA7XX_CM_DIV_H14_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
+#define DRA7XX_CM_DIV_H21_DPLL_CORE_OFFSET		0x0050
+#define DRA7XX_CM_DIV_H21_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_DIV_H22_DPLL_CORE_OFFSET		0x0054
+#define DRA7XX_CM_DIV_H22_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_DIV_H23_DPLL_CORE_OFFSET		0x0058
+#define DRA7XX_CM_DIV_H23_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_DIV_H24_DPLL_CORE_OFFSET		0x005c
+#define DRA7XX_CM_DIV_H24_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
+#define DRA7XX_CM_CLKMODE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_IDLEST_DPLL_MPU_OFFSET		0x0064
+#define DRA7XX_CM_IDLEST_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0064)
+#define DRA7XX_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
+#define DRA7XX_CM_AUTOIDLE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0068)
+#define DRA7XX_CM_CLKSEL_DPLL_MPU_OFFSET		0x006c
+#define DRA7XX_CM_CLKSEL_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x006c)
+#define DRA7XX_CM_DIV_M2_DPLL_MPU_OFFSET		0x0070
+#define DRA7XX_CM_DIV_M2_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0070)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET	0x0088
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET	0x008c
+#define DRA7XX_CM_BYPCLK_DPLL_MPU_OFFSET		0x009c
+#define DRA7XX_CM_BYPCLK_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x009c)
+#define DRA7XX_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
+#define DRA7XX_CM_CLKMODE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a0)
+#define DRA7XX_CM_IDLEST_DPLL_IVA_OFFSET		0x00a4
+#define DRA7XX_CM_IDLEST_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a4)
+#define DRA7XX_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
+#define DRA7XX_CM_AUTOIDLE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a8)
+#define DRA7XX_CM_CLKSEL_DPLL_IVA_OFFSET		0x00ac
+#define DRA7XX_CM_CLKSEL_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ac)
+#define DRA7XX_CM_DIV_M2_DPLL_IVA_OFFSET		0x00b0
+#define DRA7XX_CM_DIV_M2_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_DIV_M3_DPLL_IVA_OFFSET		0x00b4
+#define DRA7XX_CM_DIV_M3_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b4)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET	0x00c8
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET	0x00cc
+#define DRA7XX_CM_BYPCLK_DPLL_IVA_OFFSET		0x00dc
+#define DRA7XX_CM_BYPCLK_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00dc)
+#define DRA7XX_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
+#define DRA7XX_CM_CLKMODE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e0)
+#define DRA7XX_CM_IDLEST_DPLL_ABE_OFFSET		0x00e4
+#define DRA7XX_CM_IDLEST_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e4)
+#define DRA7XX_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
+#define DRA7XX_CM_AUTOIDLE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e8)
+#define DRA7XX_CM_CLKSEL_DPLL_ABE_OFFSET		0x00ec
+#define DRA7XX_CM_CLKSEL_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ec)
+#define DRA7XX_CM_DIV_M2_DPLL_ABE_OFFSET		0x00f0
+#define DRA7XX_CM_DIV_M2_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f0)
+#define DRA7XX_CM_DIV_M3_DPLL_ABE_OFFSET		0x00f4
+#define DRA7XX_CM_DIV_M3_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f4)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET	0x0108
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET	0x010c
+#define DRA7XX_CM_CLKMODE_DPLL_DDR_OFFSET		0x0110
+#define DRA7XX_CM_CLKMODE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0110)
+#define DRA7XX_CM_IDLEST_DPLL_DDR_OFFSET		0x0114
+#define DRA7XX_CM_IDLEST_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0114)
+#define DRA7XX_CM_AUTOIDLE_DPLL_DDR_OFFSET		0x0118
+#define DRA7XX_CM_AUTOIDLE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0118)
+#define DRA7XX_CM_CLKSEL_DPLL_DDR_OFFSET		0x011c
+#define DRA7XX_CM_CLKSEL_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x011c)
+#define DRA7XX_CM_DIV_M2_DPLL_DDR_OFFSET		0x0120
+#define DRA7XX_CM_DIV_M2_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0120)
+#define DRA7XX_CM_DIV_M3_DPLL_DDR_OFFSET		0x0124
+#define DRA7XX_CM_DIV_M3_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0124)
+#define DRA7XX_CM_DIV_H11_DPLL_DDR_OFFSET		0x0128
+#define DRA7XX_CM_DIV_H11_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0128)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET	0x012c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET	0x0130
+#define DRA7XX_CM_CLKMODE_DPLL_DSP_OFFSET		0x0134
+#define DRA7XX_CM_CLKMODE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0134)
+#define DRA7XX_CM_IDLEST_DPLL_DSP_OFFSET		0x0138
+#define DRA7XX_CM_IDLEST_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0138)
+#define DRA7XX_CM_AUTOIDLE_DPLL_DSP_OFFSET		0x013c
+#define DRA7XX_CM_AUTOIDLE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x013c)
+#define DRA7XX_CM_CLKSEL_DPLL_DSP_OFFSET		0x0140
+#define DRA7XX_CM_CLKSEL_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0140)
+#define DRA7XX_CM_DIV_M2_DPLL_DSP_OFFSET		0x0144
+#define DRA7XX_CM_DIV_M2_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0144)
+#define DRA7XX_CM_DIV_M3_DPLL_DSP_OFFSET		0x0148
+#define DRA7XX_CM_DIV_M3_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0148)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DSP_OFFSET	0x014c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DSP_OFFSET	0x0150
+#define DRA7XX_CM_BYPCLK_DPLL_DSP_OFFSET		0x0154
+#define DRA7XX_CM_BYPCLK_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0154)
+#define DRA7XX_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
+#define DRA7XX_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
+#define DRA7XX_CM_DYN_DEP_PRESCAL_OFFSET		0x0170
+#define DRA7XX_CM_RESTORE_ST_OFFSET			0x0180
+#define DRA7XX_CM_CLKMODE_DPLL_EVE_OFFSET		0x0184
+#define DRA7XX_CM_CLKMODE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0184)
+#define DRA7XX_CM_IDLEST_DPLL_EVE_OFFSET		0x0188
+#define DRA7XX_CM_IDLEST_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0188)
+#define DRA7XX_CM_AUTOIDLE_DPLL_EVE_OFFSET		0x018c
+#define DRA7XX_CM_AUTOIDLE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x018c)
+#define DRA7XX_CM_CLKSEL_DPLL_EVE_OFFSET		0x0190
+#define DRA7XX_CM_CLKSEL_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0190)
+#define DRA7XX_CM_DIV_M2_DPLL_EVE_OFFSET		0x0194
+#define DRA7XX_CM_DIV_M2_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0194)
+#define DRA7XX_CM_DIV_M3_DPLL_EVE_OFFSET		0x0198
+#define DRA7XX_CM_DIV_M3_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0198)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_EVE_OFFSET	0x019c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_EVE_OFFSET	0x01a0
+#define DRA7XX_CM_BYPCLK_DPLL_EVE_OFFSET		0x01a4
+#define DRA7XX_CM_BYPCLK_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a4)
+#define DRA7XX_CM_CLKMODE_DPLL_GMAC_OFFSET		0x01a8
+#define DRA7XX_CM_CLKMODE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a8)
+#define DRA7XX_CM_IDLEST_DPLL_GMAC_OFFSET		0x01ac
+#define DRA7XX_CM_IDLEST_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ac)
+#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC_OFFSET		0x01b0
+#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b0)
+#define DRA7XX_CM_CLKSEL_DPLL_GMAC_OFFSET		0x01b4
+#define DRA7XX_CM_CLKSEL_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b4)
+#define DRA7XX_CM_DIV_M2_DPLL_GMAC_OFFSET		0x01b8
+#define DRA7XX_CM_DIV_M2_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b8)
+#define DRA7XX_CM_DIV_M3_DPLL_GMAC_OFFSET		0x01bc
+#define DRA7XX_CM_DIV_M3_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01bc)
+#define DRA7XX_CM_DIV_H11_DPLL_GMAC_OFFSET		0x01c0
+#define DRA7XX_CM_DIV_H11_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c0)
+#define DRA7XX_CM_DIV_H12_DPLL_GMAC_OFFSET		0x01c4
+#define DRA7XX_CM_DIV_H12_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c4)
+#define DRA7XX_CM_DIV_H13_DPLL_GMAC_OFFSET		0x01c8
+#define DRA7XX_CM_DIV_H13_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c8)
+#define DRA7XX_CM_DIV_H14_DPLL_GMAC_OFFSET		0x01cc
+#define DRA7XX_CM_DIV_H14_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01cc)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GMAC_OFFSET	0x01d0
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GMAC_OFFSET	0x01d4
+#define DRA7XX_CM_CLKMODE_DPLL_GPU_OFFSET		0x01d8
+#define DRA7XX_CM_CLKMODE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01d8)
+#define DRA7XX_CM_IDLEST_DPLL_GPU_OFFSET		0x01dc
+#define DRA7XX_CM_IDLEST_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01dc)
+#define DRA7XX_CM_AUTOIDLE_DPLL_GPU_OFFSET		0x01e0
+#define DRA7XX_CM_AUTOIDLE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e0)
+#define DRA7XX_CM_CLKSEL_DPLL_GPU_OFFSET		0x01e4
+#define DRA7XX_CM_CLKSEL_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e4)
+#define DRA7XX_CM_DIV_M2_DPLL_GPU_OFFSET		0x01e8
+#define DRA7XX_CM_DIV_M2_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e8)
+#define DRA7XX_CM_DIV_M3_DPLL_GPU_OFFSET		0x01ec
+#define DRA7XX_CM_DIV_M3_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ec)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GPU_OFFSET	0x01f0
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GPU_OFFSET	0x01f4
+
+/* CM_CORE_AON.MPU_CM_CORE_AON register offsets */
+#define DRA7XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_MPU_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_MPU_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_MPU_MPU_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0020)
+#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL_OFFSET	0x0028
+#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0028)
+
+/* CM_CORE_AON.DSP1_CM_CORE_AON register offsets */
+#define DRA7XX_CM_DSP1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_DSP1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_DSP1_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_DSP1_DSP1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_DSP1_DSP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP1_INST, 0x0020)
+
+/* CM_CORE_AON.IPU_CM_CORE_AON register offsets */
+#define DRA7XX_CM_IPU1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_IPU1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_IPU1_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_IPU1_IPU1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_IPU1_IPU1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0020)
+#define DRA7XX_CM_IPU_CLKSTCTRL_OFFSET			0x0040
+#define DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_IPU_MCASP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0050)
+#define DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET		0x0058
+#define DRA7XX_CM_IPU_TIMER5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0058)
+#define DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_IPU_TIMER6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0060)
+#define DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET		0x0068
+#define DRA7XX_CM_IPU_TIMER7_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0068)
+#define DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET		0x0070
+#define DRA7XX_CM_IPU_TIMER8_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0070)
+#define DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET		0x0078
+#define DRA7XX_CM_IPU_I2C5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0078)
+#define DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET		0x0080
+#define DRA7XX_CM_IPU_UART6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0080)
+
+/* CM_CORE_AON.DSP2_CM_CORE_AON register offsets */
+#define DRA7XX_CM_DSP2_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_DSP2_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_DSP2_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_DSP2_DSP2_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_DSP2_DSP2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP2_INST, 0x0020)
+
+/* CM_CORE_AON.EVE1_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE1_EVE1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE1_EVE1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE1_INST, 0x0020)
+
+/* CM_CORE_AON.EVE2_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE2_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE2_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE2_EVE2_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE2_EVE2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE2_INST, 0x0020)
+
+/* CM_CORE_AON.EVE3_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE3_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE3_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE3_EVE3_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE3_EVE3_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE3_INST, 0x0020)
+
+/* CM_CORE_AON.EVE4_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE4_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE4_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE4_EVE4_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE4_EVE4_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE4_INST, 0x0020)
+
+/* CM_CORE_AON.RTC_CM_CORE_AON register offsets */
+#define DRA7XX_CM_RTC_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET		0x0004
+#define DRA7XX_CM_RTC_RTCSS_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_RTC_INST, 0x0004)
+
+/* CM_CORE_AON.VPE_CM_CORE_AON register offsets */
+#define DRA7XX_CM_VPE_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET		0x0004
+#define DRA7XX_CM_VPE_VPE_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_VPE_INST, 0x0004)
+#define DRA7XX_CM_VPE_STATICDEP_OFFSET			0x0008
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
new file mode 100644
index 000000000000..9ad7594e7622
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -0,0 +1,513 @@
+/*
+ * DRA7xx CM2 instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
+
+#include "cm_44xx_54xx.h"
+
+/* CM2 base address */
+#define DRA7XX_CM_CORE_BASE		0x4a008000
+
+#define DRA7XX_CM_CORE_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_BASE + (inst) + (reg))
+
+/* CM_CORE instances */
+#define DRA7XX_CM_CORE_OCP_SOCKET_INST	0x0000
+#define DRA7XX_CM_CORE_CKGEN_INST	0x0104
+#define DRA7XX_CM_CORE_COREAON_INST	0x0600
+#define DRA7XX_CM_CORE_CORE_INST	0x0700
+#define DRA7XX_CM_CORE_IVA_INST		0x0f00
+#define DRA7XX_CM_CORE_CAM_INST		0x1000
+#define DRA7XX_CM_CORE_DSS_INST		0x1100
+#define DRA7XX_CM_CORE_GPU_INST		0x1200
+#define DRA7XX_CM_CORE_L3INIT_INST	0x1300
+#define DRA7XX_CM_CORE_CUSTEFUSE_INST	0x1600
+#define DRA7XX_CM_CORE_L4PER_INST	0x1700
+#define DRA7XX_CM_CORE_RESTORE_INST	0x1e18
+
+/* CM_CORE clockdomain register offsets (from instance start) */
+#define DRA7XX_CM_CORE_COREAON_COREAON_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_CORE_L3MAIN1_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_CORE_IPU2_CDOFFS			0x0200
+#define DRA7XX_CM_CORE_CORE_DMA_CDOFFS			0x0300
+#define DRA7XX_CM_CORE_CORE_EMIF_CDOFFS			0x0400
+#define DRA7XX_CM_CORE_CORE_ATL_CDOFFS			0x0520
+#define DRA7XX_CM_CORE_CORE_L4CFG_CDOFFS		0x0600
+#define DRA7XX_CM_CORE_CORE_L3INSTR_CDOFFS		0x0700
+#define DRA7XX_CM_CORE_IVA_IVA_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_CAM_CAM_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_DSS_DSS_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_GPU_GPU_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_L3INIT_L3INIT_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_L3INIT_PCIE_CDOFFS		0x00a0
+#define DRA7XX_CM_CORE_L3INIT_GMAC_CDOFFS		0x00c0
+#define DRA7XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_L4PER_L4PER_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_L4PER_L4SEC_CDOFFS		0x0180
+#define DRA7XX_CM_CORE_L4PER_L4PER2_CDOFFS		0x01fc
+#define DRA7XX_CM_CORE_L4PER_L4PER3_CDOFFS		0x0210
+
+/* CM_CORE */
+
+/* CM_CORE.OCP_SOCKET_CM_CORE register offsets */
+#define DRA7XX_REVISION_CM_CORE_OFFSET				0x0000
+#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_CM_CORE_DEBUG_CFG_OFFSET				0x00f0
+
+/* CM_CORE.CKGEN_CM_CORE register offsets */
+#define DRA7XX_CM_CLKSEL_USB_60MHZ_OFFSET			0x0000
+#define DRA7XX_CM_CLKSEL_USB_60MHZ				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKMODE_DPLL_PER_OFFSET			0x003c
+#define DRA7XX_CM_CLKMODE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x003c)
+#define DRA7XX_CM_IDLEST_DPLL_PER_OFFSET			0x0040
+#define DRA7XX_CM_IDLEST_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_AUTOIDLE_DPLL_PER_OFFSET			0x0044
+#define DRA7XX_CM_AUTOIDLE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_CLKSEL_DPLL_PER_OFFSET			0x0048
+#define DRA7XX_CM_CLKSEL_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0048)
+#define DRA7XX_CM_DIV_M2_DPLL_PER_OFFSET			0x004c
+#define DRA7XX_CM_DIV_M2_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x004c)
+#define DRA7XX_CM_DIV_M3_DPLL_PER_OFFSET			0x0050
+#define DRA7XX_CM_DIV_M3_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_DIV_H11_DPLL_PER_OFFSET			0x0054
+#define DRA7XX_CM_DIV_H11_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_DIV_H12_DPLL_PER_OFFSET			0x0058
+#define DRA7XX_CM_DIV_H12_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_DIV_H13_DPLL_PER_OFFSET			0x005c
+#define DRA7XX_CM_DIV_H13_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_DIV_H14_DPLL_PER_OFFSET			0x0060
+#define DRA7XX_CM_DIV_H14_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0064
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x0068
+#define DRA7XX_CM_CLKMODE_DPLL_USB_OFFSET			0x007c
+#define DRA7XX_CM_CLKMODE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x007c)
+#define DRA7XX_CM_IDLEST_DPLL_USB_OFFSET			0x0080
+#define DRA7XX_CM_IDLEST_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0080)
+#define DRA7XX_CM_AUTOIDLE_DPLL_USB_OFFSET			0x0084
+#define DRA7XX_CM_AUTOIDLE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0084)
+#define DRA7XX_CM_CLKSEL_DPLL_USB_OFFSET			0x0088
+#define DRA7XX_CM_CLKSEL_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0088)
+#define DRA7XX_CM_DIV_M2_DPLL_USB_OFFSET			0x008c
+#define DRA7XX_CM_DIV_M2_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x008c)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a4
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00a8
+#define DRA7XX_CM_CLKDCOLDO_DPLL_USB_OFFSET			0x00b0
+#define DRA7XX_CM_CLKDCOLDO_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF_OFFSET			0x00fc
+#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00fc)
+#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF_OFFSET			0x0100
+#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0100)
+#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF_OFFSET			0x0104
+#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0104)
+#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF_OFFSET			0x0108
+#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0108)
+#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF_OFFSET			0x010c
+#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x010c)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PCIE_REF_OFFSET		0x0110
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PCIE_REF_OFFSET		0x0114
+#define DRA7XX_CM_CLKMODE_APLL_PCIE_OFFSET			0x0118
+#define DRA7XX_CM_CLKMODE_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0118)
+#define DRA7XX_CM_IDLEST_APLL_PCIE_OFFSET			0x011c
+#define DRA7XX_CM_IDLEST_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x011c)
+#define DRA7XX_CM_DIV_M2_APLL_PCIE_OFFSET			0x0120
+#define DRA7XX_CM_DIV_M2_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0120)
+#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE_OFFSET			0x0124
+#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0124)
+
+/* CM_CORE.COREAON_CM_CORE register offsets */
+#define DRA7XX_CM_COREAON_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET	0x0028
+#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0028)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET	0x0038
+#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0038)
+#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0040)
+#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0050)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL_OFFSET	0x0058
+#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0058)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL_OFFSET	0x0068
+#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0068)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL_OFFSET	0x0078
+#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0078)
+#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL_OFFSET		0x0088
+#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0088)
+#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0098)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL_OFFSET		0x00a0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00a0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00b0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00c0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00d0)
+
+/* CM_CORE.CORE_CM_CORE register offsets */
+#define DRA7XX_CM_L3MAIN1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L3MAIN1_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0020)
+#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0028)
+#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL_OFFSET		0x0030
+#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0030)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0050)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL_OFFSET		0x0058
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0058)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0060)
+#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL_OFFSET		0x0068
+#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0068)
+#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET			0x0070
+#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0070)
+#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0078)
+#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0080)
+#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0088)
+#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0090)
+#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0098)
+#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL_OFFSET		0x00a0
+#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a0)
+#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL_OFFSET		0x00a8
+#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a8)
+#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b0)
+#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL_OFFSET		0x00b8
+#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b8)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c0)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL_OFFSET		0x00c8
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c8)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d0)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL_OFFSET	0x00d8
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d8)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL_OFFSET	0x00f0
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f0)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL_OFFSET	0x00f8
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f8)
+#define DRA7XX_CM_IPU2_CLKSTCTRL_OFFSET				0x0200
+#define DRA7XX_CM_IPU2_STATICDEP_OFFSET				0x0204
+#define DRA7XX_CM_IPU2_DYNAMICDEP_OFFSET			0x0208
+#define DRA7XX_CM_IPU2_IPU2_CLKCTRL_OFFSET			0x0220
+#define DRA7XX_CM_IPU2_IPU2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0220)
+#define DRA7XX_CM_DMA_CLKSTCTRL_OFFSET				0x0300
+#define DRA7XX_CM_DMA_STATICDEP_OFFSET				0x0304
+#define DRA7XX_CM_DMA_DYNAMICDEP_OFFSET				0x0308
+#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET			0x0320
+#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0320)
+#define DRA7XX_CM_EMIF_CLKSTCTRL_OFFSET				0x0400
+#define DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET			0x0420
+#define DRA7XX_CM_EMIF_DMM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0420)
+#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL_OFFSET		0x0428
+#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0428)
+#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET			0x0430
+#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0430)
+#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET			0x0438
+#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0438)
+#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL_OFFSET			0x0440
+#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0440)
+#define DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET			0x0500
+#define DRA7XX_CM_ATL_ATL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0500)
+#define DRA7XX_CM_ATL_CLKSTCTRL_OFFSET				0x0520
+#define DRA7XX_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
+#define DRA7XX_CM_L4CFG_DYNAMICDEP_OFFSET			0x0608
+#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET			0x0620
+#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0620)
+#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET			0x0628
+#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0628)
+#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET			0x0630
+#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0630)
+#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET			0x0638
+#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0638)
+#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL_OFFSET			0x0640
+#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0640)
+#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET			0x0648
+#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0648)
+#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET			0x0650
+#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0650)
+#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET			0x0658
+#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0658)
+#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET			0x0660
+#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0660)
+#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET			0x0668
+#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0668)
+#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET			0x0670
+#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0670)
+#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET			0x0678
+#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0678)
+#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET			0x0680
+#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0680)
+#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET		0x0688
+#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0688)
+#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET		0x0690
+#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0690)
+#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET		0x0698
+#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0698)
+#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET		0x06a0
+#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a0)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL_OFFSET	0x06a8
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a8)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL_OFFSET	0x06b0
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b0)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL_OFFSET	0x06b8
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b8)
+#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL_OFFSET		0x06c0
+#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06c0)
+#define DRA7XX_CM_L3INSTR_CLKSTCTRL_OFFSET			0x0700
+#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET		0x0720
+#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0720)
+#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET		0x0728
+#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0728)
+#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL_OFFSET		0x0740
+#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0740)
+#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL_OFFSET		0x0748
+#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0748)
+#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL_OFFSET	0x0750
+#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0750)
+
+/* CM_CORE.IVA_CM_CORE register offsets */
+#define DRA7XX_CM_IVA_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_IVA_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_IVA_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_IVA_IVA_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_IVA_IVA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0020)
+#define DRA7XX_CM_IVA_SL2_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_IVA_SL2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0028)
+
+/* CM_CORE.CAM_CM_CORE register offsets */
+#define DRA7XX_CM_CAM_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CAM_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_CAM_VIP1_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CAM_VIP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0020)
+#define DRA7XX_CM_CAM_VIP2_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_CAM_VIP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0028)
+#define DRA7XX_CM_CAM_VIP3_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_CAM_VIP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0030)
+#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0038)
+#define DRA7XX_CM_CAM_CSI1_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_CAM_CSI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0040)
+#define DRA7XX_CM_CAM_CSI2_CLKCTRL_OFFSET			0x0048
+#define DRA7XX_CM_CAM_CSI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0048)
+
+/* CM_CORE.DSS_CM_CORE register offsets */
+#define DRA7XX_CM_DSS_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_DSS_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_DSS_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_DSS_DSS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0020)
+#define DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_DSS_BB2D_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0030)
+#define DRA7XX_CM_DSS_SDVENC_CLKCTRL_OFFSET			0x003c
+#define DRA7XX_CM_DSS_SDVENC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x003c)
+
+/* CM_CORE.GPU_CM_CORE register offsets */
+#define DRA7XX_CM_GPU_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_GPU_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_GPU_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_GPU_GPU_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_GPU_GPU_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_GPU_INST, 0x0020)
+
+/* CM_CORE.L3INIT_CM_CORE register offsets */
+#define DRA7XX_CM_L3INIT_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L3INIT_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_L3INIT_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0028)
+#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0030)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0040)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET		0x0048
+#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0048)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0050)
+#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL_OFFSET			0x0058
+#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0058)
+#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFFSET		0x0078
+#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0078)
+#define DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L3INIT_SATA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088)
+#define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET				0x00a0
+#define DRA7XX_CM_PCIE_STATICDEP_OFFSET				0x00a4
+#define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET				0x00c0
+#define DRA7XX_CM_GMAC_STATICDEP_OFFSET				0x00c4
+#define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET			0x00c8
+#define DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET			0x00d0
+#define DRA7XX_CM_GMAC_GMAC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00d0)
+#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET		0x00e0
+#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e0)
+#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET		0x00e8
+#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e8)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET		0x00f0
+#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00f0)
+
+/* CM_CORE.CUSTEFUSE_CM_CORE register offsets */
+#define DRA7XX_CM_CUSTEFUSE_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL_OFFSET	0x0020
+#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CUSTEFUSE_INST, 0x0020)
+
+/* CM_CORE.L4PER_CM_CORE register offsets */
+#define DRA7XX_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L4PER_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET			0x000c
+#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x000c)
+#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET			0x0014
+#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0014)
+#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL_OFFSET			0x0018
+#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0018)
+#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0020)
+#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0028)
+#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0030)
+#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0038)
+#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0040)
+#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET			0x0048
+#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0048)
+#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET			0x0050
+#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0050)
+#define DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET			0x0058
+#define DRA7XX_CM_L4PER_ELM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0058)
+#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET			0x0060
+#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0060)
+#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET			0x0068
+#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0068)
+#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET			0x0070
+#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0070)
+#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0078)
+#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0080)
+#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0088)
+#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0090)
+#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET			0x0098
+#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0098)
+#define DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET			0x00a0
+#define DRA7XX_CM_L4PER_I2C1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a0)
+#define DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET			0x00a8
+#define DRA7XX_CM_L4PER_I2C2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a8)
+#define DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET			0x00b0
+#define DRA7XX_CM_L4PER_I2C3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b0)
+#define DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET			0x00b8
+#define DRA7XX_CM_L4PER_I2C4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b8)
+#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET			0x00c0
+#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c0)
+#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET			0x00c4
+#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c4)
+#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET			0x00c8
+#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c8)
+#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET			0x00d0
+#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d0)
+#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET			0x00d8
+#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d8)
+#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET			0x00f0
+#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f0)
+#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET			0x00f8
+#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f8)
+#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET			0x0100
+#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0100)
+#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET			0x0108
+#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0108)
+#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET			0x0110
+#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0110)
+#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET			0x0118
+#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0118)
+#define DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET			0x0120
+#define DRA7XX_CM_L4PER_MMC3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0120)
+#define DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET			0x0128
+#define DRA7XX_CM_L4PER_MMC4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0128)
+#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET			0x0130
+#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0130)
+#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET			0x0138
+#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0138)
+#define DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET			0x0140
+#define DRA7XX_CM_L4PER_UART1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0140)
+#define DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET			0x0148
+#define DRA7XX_CM_L4PER_UART2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0148)
+#define DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET			0x0150
+#define DRA7XX_CM_L4PER_UART3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0150)
+#define DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET			0x0158
+#define DRA7XX_CM_L4PER_UART4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0158)
+#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET			0x0160
+#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0160)
+#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET			0x0168
+#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0168)
+#define DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET			0x0170
+#define DRA7XX_CM_L4PER_UART5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0170)
+#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET			0x0178
+#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0178)
+#define DRA7XX_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
+#define DRA7XX_CM_L4SEC_STATICDEP_OFFSET			0x0184
+#define DRA7XX_CM_L4SEC_DYNAMICDEP_OFFSET			0x0188
+#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET			0x0190
+#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0190)
+#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET			0x0198
+#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0198)
+#define DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET			0x01a0
+#define DRA7XX_CM_L4SEC_AES1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a0)
+#define DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET			0x01a8
+#define DRA7XX_CM_L4SEC_AES2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a8)
+#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET			0x01b0
+#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b0)
+#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL_OFFSET			0x01b8
+#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b8)
+#define DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET			0x01c0
+#define DRA7XX_CM_L4SEC_RNG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c0)
+#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET			0x01c8
+#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c8)
+#define DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET			0x01d0
+#define DRA7XX_CM_L4PER2_UART7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d0)
+#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFFSET		0x01d8
+#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d8)
+#define DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET			0x01e0
+#define DRA7XX_CM_L4PER2_UART8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e0)
+#define DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET			0x01e8
+#define DRA7XX_CM_L4PER2_UART9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e8)
+#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET			0x01f0
+#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f0)
+#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL_OFFSET			0x01f8
+#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f8)
+#define DRA7XX_CM_L4PER2_CLKSTCTRL_OFFSET			0x01fc
+#define DRA7XX_CM_L4PER2_DYNAMICDEP_OFFSET			0x0200
+#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET			0x0204
+#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0204)
+#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET			0x0208
+#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0208)
+#define DRA7XX_CM_L4PER2_STATICDEP_OFFSET			0x020c
+#define DRA7XX_CM_L4PER3_CLKSTCTRL_OFFSET			0x0210
+#define DRA7XX_CM_L4PER3_DYNAMICDEP_OFFSET			0x0214
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 6774a53a3874..ce25abbcffae 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -327,6 +327,73 @@ struct clkdm_ops omap2_clkdm_operations = {
 	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
 };
 
+int omap2xxx_cm_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	return (f1 | f2) ? 1 : 0;
+}
+
+int omap2xxx_cm_mpu_retention_allowed(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
+		return 0;
+	/* Check for UART3. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3_MASK)
+		return 0;
+
+	return 1;
+}
+
+u32 omap2xxx_cm_get_core_clk_src(void)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	return v;
+}
+
+u32 omap2xxx_cm_get_core_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+}
+
+u32 omap2xxx_cm_get_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+}
+
+u32 omap2xxx_cm_get_pll_status(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+}
+
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
+{
+	u32 tmp;
+
+	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
+	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
+		OMAP24XX_CLKSEL_DSS2_MASK;
+	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
+	if (cpu_is_omap2430())
+		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 4cbb39b051d2..891d81c3c8f4 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -62,6 +62,14 @@ extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
 					 u8 idlest_shift);
 extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
 					s16 *prcm_inst, u8 *idlest_reg_id);
+extern int omap2xxx_cm_fclks_active(void);
+extern int omap2xxx_cm_mpu_retention_allowed(void);
+extern u32 omap2xxx_cm_get_core_clk_src(void);
+extern u32 omap2xxx_cm_get_core_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_status(void);
+extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
+					 u32 mdm);
 
 extern int __init omap2xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 325a51576576..40a22e5649ae 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -48,13 +48,13 @@
 /* Private functions */
 
 /* Read a register in a CM instance */
-static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx)
 {
 	return __raw_readl(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
-static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx)
 {
 	__raw_writel(val, cm_base + inst + idx);
 }
@@ -138,7 +138,7 @@ static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -158,7 +158,7 @@ static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +177,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +191,7 @@ void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +204,7 @@ void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +217,7 @@ void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 9d1f4fcdebbb..cfb8891b0c0e 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -377,13 +377,13 @@
 
 
 #ifndef __ASSEMBLER__
-extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+#ifdef CONFIG_SOC_AM33XX
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 9061c307d915..f6f028867bfe 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -636,6 +636,28 @@ void omap3_cm_restore_context(void)
 			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
 }
 
+void omap3_cm_save_scratchpad_contents(u32 *ptr)
+{
+	*ptr++ = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+		~OMAP3430_AUTO_PERIPH_DPLL_MASK;
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index e8e146f4a43f..8224c91b4d7a 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -83,6 +83,7 @@ extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
 
 extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
+extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
 
 extern int __init omap3xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index f0290f5566fe..731ca134348c 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -111,7 +111,7 @@ static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /* Public functions */
 
 /* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -120,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 }
 
 /* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -129,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
 				   s16 idx)
 {
 	u32 v;
@@ -142,12 +142,12 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
 	return v;
 }
 
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
 }
 
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
 }
@@ -177,7 +177,7 @@ u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -196,7 +196,7 @@ static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -216,7 +216,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
 }
@@ -231,7 +231,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
@@ -245,7 +245,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
 }
@@ -483,3 +483,12 @@ struct clkdm_ops omap4_clkdm_operations = {
 	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
 	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
 };
+
+struct clkdm_ops am43xx_clkdm_operations = {
+	.clkdm_sleep		= omap4_clkdm_sleep,
+	.clkdm_wakeup		= omap4_clkdm_wakeup,
+	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index bd7bab889745..7f56ea444bc4 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -11,11 +11,11 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 #define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 
-extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
@@ -27,14 +27,14 @@ extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly
  */
-extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, s16 idx);
-extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
-extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+				   u16 inst, s16 idx);
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				   s16 idx);
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				     s16 idx);
 extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
 					   u32 mask);
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dfcc182ecff9..f7644febee81 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -98,6 +98,7 @@ void am35xx_init_early(void);
 void ti81xx_init_early(void);
 void am33xx_init_early(void);
 void am43xx_init_early(void);
+void am43xx_init_late(void);
 void omap4430_init_early(void);
 void omap5_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
@@ -109,7 +110,11 @@ void omap35xx_init_late(void);
 void omap3630_init_late(void);
 void am35xx_init_late(void);
 void ti81xx_init_late(void);
+void am33xx_init_late(void);
+void omap5_init_late(void);
 int omap2_common_pm_late_init(void);
+void dra7xx_init_early(void);
+void dra7xx_init_late(void);
 
 #ifdef CONFIG_SOC_BUS
 void omap_soc_device_init(void);
@@ -287,6 +292,9 @@ static inline void omap4_cpu_resume(void)
 
 #endif
 
+void pdata_quirks_init(struct of_device_id *);
+void omap_pcs_legacy_init(int irq, void (*rearm)(void));
+
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe4a4ea..44bb4d544dcf 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -46,17 +46,7 @@ struct omap3_scratchpad {
 struct omap3_scratchpad_prcm_block {
 	u32 prm_clksrc_ctrl;
 	u32 prm_clksel;
-	u32 cm_clksel_core;
-	u32 cm_clksel_wkup;
-	u32 cm_clken_pll;
-	u32 cm_autoidle_pll;
-	u32 cm_clksel1_pll;
-	u32 cm_clksel2_pll;
-	u32 cm_clksel3_pll;
-	u32 cm_clken_pll_mpu;
-	u32 cm_autoidle_pll_mpu;
-	u32 cm_clksel1_pll_mpu;
-	u32 cm_clksel2_pll_mpu;
+	u32 cm_contents[11];
 	u32 prcm_block_size;
 };
 
@@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void)
 	prcm_block_contents.prm_clksel =
 		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
 				       OMAP3_PRM_CLKSEL_OFFSET);
-	prcm_block_contents.cm_clksel_core =
-			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clksel_wkup =
-			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clken_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
-	 */
-	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
-			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-	prcm_block_contents.cm_clksel1_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.cm_clksel3_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
-	prcm_block_contents.cm_clken_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
-	prcm_block_contents.cm_autoidle_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
-	prcm_block_contents.cm_clksel1_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+
+	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
+
 	prcm_block_contents.prcm_block_size = 0x0;
 
 	/* Populate the SDRC block contents */
@@ -604,4 +569,15 @@ int omap3_ctrl_save_padconf(void)
 	return 0;
 }
 
+/**
+ * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
+ *
+ * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
+ * force disable IVA2 so that it does not prevent any low-power states.
+ */
+void omap3_ctrl_set_iva_bootmode_idle(void)
+{
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index f7d7c2ef1b40..da054801b114 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -427,6 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
+extern void omap3_ctrl_set_iva_bootmode_idle(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c443f2e97e10..4c8982ae9529 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+	if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) &&
 		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 3c1279f27d1f..0dd6398bade4 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,7 +19,6 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
-#include <linux/wl12xx.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -37,6 +36,7 @@
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
+#include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
@@ -327,44 +327,6 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static void __init omap_init_mcpdm(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("mcpdm");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
-		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
-
-static void __init omap_init_dmic(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dmic");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
-}
-#else
-static inline void omap_init_dmic(void) {}
-#endif
-
 #if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
 		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
 
@@ -504,47 +466,13 @@ static struct platform_device omap_vout_device = {
 	.resource 	= &omap_vout_resource[0],
 	.id		= -1,
 };
-static void omap_init_vout(void)
-{
-	if (platform_device_register(&omap_vout_device) < 0)
-		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
-}
-#else
-static inline void omap_init_vout(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_WL12XX)
 
-static struct wl12xx_platform_data wl12xx __initdata;
-
-void __init omap_init_wl12xx_of(void)
+int __init omap_init_vout(void)
 {
-	int ret;
-
-	if (!of_have_populated_dt())
-		return;
-
-	if (of_machine_is_compatible("ti,omap4-sdp")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_26;
-		wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26;
-		wl12xx.irq = gpio_to_irq(53);
-	} else if (of_machine_is_compatible("ti,omap4-panda")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_38;
-		wl12xx.irq = gpio_to_irq(53);
-	} else {
-		return;
-	}
-
-	ret = wl12xx_set_platform_data(&wl12xx);
-	if (ret) {
-		pr_err("error setting wl12xx data: %d\n", ret);
-		return;
-	}
+	return platform_device_register(&omap_vout_device);
 }
 #else
-static inline void omap_init_wl12xx_of(void)
-{
-}
+int __init omap_init_vout(void) { return 0; }
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -565,18 +493,12 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
-		omap_init_dmic();
-		omap_init_mcpdm();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();
-	} else {
-		/* These can be removed when bindings are done */
-		omap_init_wl12xx_of();
+		omap_init_rng();
 	}
 	omap_init_sti();
-	omap_init_rng();
-	omap_init_vout();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 03a0516c7f67..a4e536b11ec9 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -416,6 +416,34 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		}
 	}
 
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index b871b017b352..f3d2ce4bc262 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -26,4 +26,8 @@ struct omap_dss_dispc_dev_attr {
 	bool	has_framedonetv_irq;
 };
 
+int omap_init_drm(void);
+int omap_init_vrfb(void);
+int omap_init_fb(void);
+int omap_init_vout(void);
 #endif
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 59a4af779f42..facd7406a03d 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -26,10 +26,9 @@
 #include <linux/platform_data/omap_drm.h>
 
 #include "soc.h"
-#include "omap_device.h"
-#include "omap_hwmod.h"
+#include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
 
 static struct omap_drm_platform_data platform_data;
 
@@ -42,26 +41,13 @@ static struct platform_device omap_drm_device = {
 	.id = 0,
 };
 
-static int __init omap_init_drm(void)
+int __init omap_init_drm(void)
 {
-	struct omap_hwmod *oh = NULL;
-	struct platform_device *pdev;
-
-	/* lookup and populate the DMM information, if present - OMAP4+ */
-	oh = omap_hwmod_lookup("dmm");
-
-	if (oh) {
-		pdev = omap_device_build(oh->name, -1, oh, NULL, 0);
-		WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
-			oh->name);
-	}
-
 	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
 }
-
-omap_arch_initcall(omap_init_drm);
-
+#else
+int __init omap_init_drm(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index bf89effa4c99..365bfd3d9c68 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -213,3 +213,47 @@ void __init omap_4430sdp_display_init_of(void)
 	platform_device_register(&sdp4430_tpd_device);
 	platform_device_register(&sdp4430_hdmi_connector_device);
 }
+
+
+/* OMAP3 IGEPv2 data */
+
+#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO	170
+
+/* DVI Connector */
+static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
+};
+
+static struct platform_device omap3_igep2_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_dvi_connector_pdata,
+};
+
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap3_igep2_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_tfp410_pdata,
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.default_display_name = "dvi",
+};
+
+void __init omap3_igep2_display_init_of(void)
+{
+	omap_display_init(&igep2_dss_data);
+
+	platform_device_register(&omap3_igep2_tfp410_device);
+	platform_device_register(&omap3_igep2_dvi_connector_device);
+}
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
index c28fe3c03588..a9becf0d5be8 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -8,5 +8,6 @@
 
 void __init omap4_panda_display_init_of(void);
 void __init omap_4430sdp_display_init_of(void);
+void __init omap3_igep2_display_init_of(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 2ca33cc0c484..26e28e94f625 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -32,6 +32,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "display.h"
 
 #ifdef CONFIG_OMAP2_VRFB
 
@@ -64,7 +65,7 @@ static const struct resource omap3_vrfb_resources[] = {
 	DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
 };
 
-static int __init omap_init_vrfb(void)
+int __init omap_init_vrfb(void)
 {
 	struct platform_device *pdev;
 	const struct resource *res;
@@ -85,8 +86,8 @@ static int __init omap_init_vrfb(void)
 
 	return PTR_RET(pdev);
 }
-
-omap_arch_initcall(omap_init_vrfb);
+#else
+int __init omap_init_vrfb(void) { return 0; }
 #endif
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -105,11 +106,10 @@ static struct platform_device omap_fb_device = {
 	.num_resources = 0,
 };
 
-static int __init omap_init_fb(void)
+int __init omap_init_fb(void)
 {
 	return platform_device_register(&omap_fb_device);
 }
-
-omap_arch_initcall(omap_init_fb);
-
+#else
+int __init omap_init_fb(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 64b5a8346982..8b6876c98ce1 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
-	if (gpmc_onenand_data->of_node)
+	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
+		if (onenand_async.sync_read || onenand_async.sync_write) {
+			if (onenand_async.sync_write)
+				gpmc_onenand_data->flags |=
+					ONENAND_SYNC_READWRITE;
+			else
+				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+			onenand_async.sync_read = false;
+			onenand_async.sync_write = false;
+		}
+	}
 
 	omap2_onenand_set_async_mode(onenand_base);
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f3fdd6afa213..81de56251955 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -149,7 +149,7 @@ struct omap3_gpmc_regs {
 
 static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
 static struct irq_chip gpmc_irq_chip;
-static unsigned gpmc_irq_start;
+static int gpmc_irq_start;
 
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
@@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 
 #ifdef CONFIG_MTD_NAND
 
-static const char * const nand_ecc_opts[] = {
-	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
-	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
-	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
-	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
-	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
-};
-
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
 	[NAND_OMAP_POLLED]			= "polled",
@@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 	gpmc_nand_data->cs = val;
 	gpmc_nand_data->of_node = child;
 
-	if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
-		for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
-			if (!strcasecmp(s, nand_ecc_opts[val])) {
-				gpmc_nand_data->ecc_opt = val;
-				break;
-			}
+	/* Detect availability of ELM module */
+	gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		gpmc_nand_data->elm_of_node =
+					of_parse_phandle(child, "elm_id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		pr_warn("%s: ti,elm-id property not found\n", __func__);
+
+	/* select ecc-scheme for NAND */
+	if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+		pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+		return -ENODEV;
+	}
+	if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+		!strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+		gpmc_nand_data->ecc_opt =
+				OMAP_ECC_HAM1_CODE_HW;
+	else if (!strcmp(s, "bch4"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+	else if (!strcmp(s, "bch8"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+	else
+		pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
 
+	/* select data transfer mode for NAND controller */
 	if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
 		for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
 			if (!strcasecmp(s, nand_xfer_types[val])) {
@@ -1491,8 +1511,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	 */
 	ret = gpmc_cs_remap(cs, res.start);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
-			cs, res.start);
+		dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
+			cs, &res.start);
 		goto err;
 	}
 
@@ -1521,6 +1541,42 @@ err:
 	return ret;
 }
 
+/*
+ * REVISIT: Add timing support from slls644g.pdf
+ */
+static int gpmc_probe_8250(struct platform_device *pdev,
+				struct device_node *child)
+{
+	struct resource res;
+	unsigned long base;
+	int ret, cs;
+
+	if (of_property_read_u32(child, "reg", &cs) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(child, 0, &res) < 0) {
+		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	ret = gpmc_cs_request(cs, resource_size(&res), &base);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+		return ret;
+	}
+
+	if (of_platform_device_create(child, NULL, &pdev->dev))
+		return 0;
+
+	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+
+	return -ENODEV;
+}
+
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1564,6 +1620,8 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
 			 of_node_cmp(child->name, "nor") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
+		else if (of_node_cmp(child->name, "8250") == 0)
+			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2dc62a25f2c3..9428c5f9d4f2 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_SOC_BUS
@@ -61,7 +62,7 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
-	} else if (soc_is_omap54xx()) {
+	} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
 		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
 		val &= OMAP5_DEVICETYPE_MASK;
 		val >>= 6;
@@ -116,7 +117,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -130,6 +131,17 @@ void omap_get_die_id(struct omap_die_id *odi)
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
+static int __init omap_feed_randpool(void)
+{
+	struct omap_die_id odi;
+
+	/* Throw the die ID into the entropy pool at boot */
+	omap_get_die_id(&odi);
+	add_device_randomness(&odi, sizeof(odi));
+	return 0;
+}
+omap_device_initcall(omap_feed_randpool);
+
 void __init omap2xxx_check_revision(void)
 {
 	int i, j;
@@ -576,8 +588,8 @@ void __init omap5xxx_check_revision(void)
 	case 0xb942:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5430_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5430_REV_ES2_0;
@@ -587,8 +599,8 @@ void __init omap5xxx_check_revision(void)
 	case 0xb998:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5432_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5432_REV_ES2_0;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4a3f06f02859..cd22262a2cc0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -251,7 +251,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef	CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 static struct map_desc omap54xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_54XX_VIRT,
@@ -333,7 +333,7 @@ void __init omap4_map_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) ||  defined(CONFIG_SOC_DRA7XX)
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
@@ -583,6 +583,11 @@ void __init am33xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_init = am33xx_clk_init;
 }
+
+void __init am33xx_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
 #ifdef CONFIG_SOC_AM43XX
@@ -594,7 +599,18 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
+	omap_prm_base_init();
+	omap_cm_base_init();
 	omap3xxx_check_revision();
+	am43xx_powerdomains_init();
+	am43xx_clockdomains_init();
+	am43xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+}
+
+void __init am43xx_init_late(void)
+{
+	omap_common_late_init();
 }
 #endif
 
@@ -651,8 +667,39 @@ void __init omap5_init_early(void)
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 }
+
+void __init omap5_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_init_early(void)
+{
+	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
+			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap_prm_base_init();
+	omap_cm_base_init();
+	omap44xx_prm_init();
+	dra7xx_powerdomains_init();
+	dra7xx_clockdomains_init();
+	dra7xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+}
+
+void __init dra7xx_init_late(void)
+{
+	omap_common_late_init();
+}
+#endif
+
+
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3926f370448f..e022a869bff2 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -233,7 +233,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_TI81XX
+#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX)
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 5d8768075dd9..b4ac3af1160c 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -25,6 +25,7 @@
 
 #include "soc.h"
 #include "omap_device.h"
+#include "clock.h"
 
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
@@ -33,22 +34,18 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
+static struct clk *mcbsp_iclks[5];
+
 static int omap3_enable_st_clock(unsigned int id, bool enable)
 {
-	unsigned int w;
-
 	/*
 	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
 	 * are enabled or sidetones start sounding ugly.
 	 */
-	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
 	if (enable)
-		w &= ~(1 << (id - 2));
+		return omap2_clk_deny_idle(mcbsp_iclks[id]);
 	else
-		w |= 1 << (id - 2);
-	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
-
-	return 0;
+		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
@@ -58,6 +55,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
+	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -99,6 +97,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		sprintf(clk_name, "mcbsp%d_ick", id);
+		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f82cf878d6af..48094b58c88f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -811,6 +811,12 @@ int __init omap_mux_late_init(void)
 		}
 	}
 
+	omap_mux_dbg_init();
+
+	/* see pinctrl-single-omap for the wake-up interrupt handling */
+	if (of_have_populated_dt())
+		return 0;
+
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
 			"hwmod_io", omap_mux_late_init);
@@ -818,8 +824,6 @@ int __init omap_mux_late_init(void)
 	if (ret)
 		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
 
-	omap_mux_dbg_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 5d2080ef7923..16f78a990d04 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -28,7 +28,7 @@
 #define OMAP_PULL_UP			(1 << 4)
 #define OMAP_ALTELECTRICALSEL		(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define OMAP_INPUT_EN			(1 << 8)
 #define OMAP_OFF_EN			(1 << 9)
 #define OMAP_OFFOUT_EN			(1 << 10)
@@ -36,8 +36,6 @@
 #define OMAP_OFF_PULL_EN		(1 << 12)
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define OMAP_WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index c53609f46294..be271f1d585b 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
 		"gpio_149", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
+		"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
 		"gpio_151", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_TX, 148,
 		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
index 67faa7b8fe92..1d777e63e05c 100644
--- a/arch/arm/mach-omap2/omap-pm.h
+++ b/arch/arm/mach-omap2/omap-pm.h
@@ -17,7 +17,7 @@
 #include <linux/device.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 
 /*
  * agent_id values for use with omap_pm_set_min_bus_tput():
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index b970440cffca..5ac122e88f67 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  *
  * This program is free software,you can redistribute it and/or modify
@@ -70,3 +72,77 @@ phys_addr_t omap_secure_ram_mempool_base(void)
 {
 	return omap_secure_memblock_base;
 }
+
+/**
+ * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
+ * @idx: The PPA API index
+ * @process: Process ID
+ * @flag: The flag indicating criticality of operation
+ * @nargs: Number of valid arguments out of four.
+ * @arg1, arg2, arg3 args4: Parameters passed to secure API
+ *
+ * Return the non-zero error value on failure.
+ *
+ * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because
+ *       it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1
+ */
+u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 ret;
+	u32 param[5];
+
+	param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */
+	param[1] = arg1;
+	param[2] = arg2;
+	param[3] = arg3;
+	param[4] = arg4;
+
+	/*
+	 * Secure API needs physical address
+	 * pointer for the parameters
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	flush_cache_all();
+	outer_clean_range(__pa(param), __pa(param + 5));
+	ret = omap_smc3(idx, process, flag, __pa(param));
+	flush_cache_all();
+	local_fiq_enable();
+	local_irq_enable();
+
+	return ret;
+}
+
+/**
+ * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register
+ *  @set_bits: bits to set in ACR
+ *  @clr_bits: bits to clear in ACR
+ *
+ * Return the non-zero error value on failure.
+*/
+u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	return rx51_secure_dispatcher(RX51_PPA_WRITE_ACR,
+				      0,
+				      FLAG_START_CRITICAL,
+				      1, acr, 0, 0, 0);
+}
+
+/**
+ * rx51_secure_rng_call: Routine for HW random generator
+ */
+u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
+{
+	return rx51_secure_dispatcher(RX51_PPA_HWRNG,
+				      0,
+				      NO_FLAG,
+				      3, ptr, count, flag, 0);
+}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 0e729170c46b..8cc7d331437d 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -42,23 +44,38 @@
 #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
+#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
+
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
+/* Secure RX-51 PPA (Primary Protected Application) APIs */
+#define RX51_PPA_HWRNG			29
+#define RX51_PPA_L2_INVAL		40
+#define RX51_PPA_WRITE_ACR		42
+
 #ifndef __ASSEMBLER__
 
 extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 
+extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
+extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
+
 #ifdef CONFIG_OMAP4_ERRATA_I688
 extern int omap_barrier_reserve_memblock(void);
 #else
 static inline void omap_barrier_reserve_memblock(void)
 { }
 #endif
+
+void set_cntfreq(void);
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index f6441c13cd8c..fd90125bffc7 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -1,9 +1,11 @@
 /*
- * OMAP44xx secure APIs file.
+ * OMAP34xx and OMAP44xx secure APIs file.
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
  * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software,you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -54,6 +56,23 @@ ENTRY(omap_smc2)
 	ldmfd   sp!, {r4-r12, pc}
 ENDPROC(omap_smc2)
 
+/**
+ * u32 omap_smc3(u32 service_id, u32 process_id, u32 flag, u32 pargs)
+ * Low level common routine for secure HAL and PPA APIs via smc #1
+ * r0 - @service_id: Secure Service ID
+ * r1 - @process_id: Process ID
+ * r2 - @flag: Flag to indicate the criticality of operation
+ * r3 - @pargs: Physical address of parameter list
+ */
+ENTRY(omap_smc3)
+	stmfd	sp!, {r4-r11, lr}
+	mov	r12, r0		@ Copy the secure service ID
+	mov	r6, #0xff	@ Indicate new Task call
+	dsb			@ Memory Barrier (not sure if needed, copied from omap_smc2)
+	smc	#1		@ Call PPA service
+	ldmfd	sp!, {r4-r11, pc}
+ENDPROC(omap_smc3)
+
 ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8708b2a9da45..75e95d4fb448 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -1,5 +1,5 @@
 /*
- * OMAP4 SMP source file. It contains platform specific fucntions
+ * OMAP4 SMP source file. It contains platform specific functions
  * needed for the linux smp kernel.
  *
  * Copyright (C) 2009 Texas Instruments, Inc.
@@ -66,6 +66,13 @@ static void omap4_secondary_init(unsigned int cpu)
 							4, 0, 0, 0, 0, 0);
 
 	/*
+	 * Configure the CNTFRQ register for the secondary cpu's which
+	 * indicates the frequency of the cpu local timers.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		set_cntfreq();
+
+	/*
 	 * Synchronise with the boot thread.
 	 */
 	spin_lock(&boot_lock);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 813c61558a5f..3664562f9148 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -33,8 +33,12 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define MAX_NR_REG_BANKS	5
-#define MAX_IRQS		160
+#define AM43XX_NR_REG_BANKS	7
+#define AM43XX_IRQS		224
+#define MAX_NR_REG_BANKS	AM43XX_NR_REG_BANKS
+#define MAX_IRQS		AM43XX_IRQS
+#define DEFAULT_NR_REG_BANKS	5
+#define DEFAULT_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
@@ -47,8 +51,8 @@ static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[MAX_IRQS];
-static unsigned int irq_banks = MAX_NR_REG_BANKS;
-static unsigned int max_irqs = MAX_IRQS;
+static unsigned int irq_banks = DEFAULT_NR_REG_BANKS;
+static unsigned int max_irqs = DEFAULT_IRQS;
 static unsigned int omap_secure_apis;
 
 /*
@@ -418,12 +422,16 @@ int __init omap_wakeupgen_init(void)
 		irq_banks = OMAP4_NR_BANKS;
 		max_irqs = OMAP4_NR_IRQS;
 		omap_secure_apis = 1;
+	} else if (soc_is_am43xx()) {
+		irq_banks = AM43XX_NR_REG_BANKS;
+		max_irqs = AM43XX_IRQS;
 	}
 
 	/* Clear all IRQ bitmasks at wakeupGen level */
 	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
-		wakeupgen_writel(0, i, CPU1_ID);
+		if (!soc_is_am43xx())
+			wakeupgen_writel(0, i, CPU1_ID);
 	}
 
 	/*
diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a086ba15868b..2d35c5709408 100644
--- a/arch/arm/mach-omap2/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
@@ -30,4 +30,8 @@
 #define OMAP54XX_CTRL_BASE		0x4a002800
 #define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
+#define DRA7XX_CM_CORE_AON_BASE		0x4a005000
+#define DRA7XX_CTRL_BASE		0x4a003400
+#define DRA7XX_TAP_BASE			0x4ae0c000
+
 #endif /* __ASM_SOC_OMAP555554XX_H */
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index f99f68e1e85b..b69dd9abb50a 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
-	if (!od) {
+	if (IS_ERR(od)) {
 		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
 			oh_name);
 		ret = PTR_ERR(od);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7f4db12b1459..e3f0ecaf87dd 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1405,7 +1405,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -2355,25 +2357,29 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
+ * @data: (unused, caller should pass NULL)
+ * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
- * No return value.
+ *
+ * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
+ * -ENXIO on absent or invalid register target address space.
  */
-static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
+				    struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
-	struct device_node *np;
 
 	if (!oh)
-		return;
+		return -EINVAL;
 
 	_save_mpu_port_index(oh);
 
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return;
+		return -ENXIO;
 
 	mem = _find_mpu_rt_addr_space(oh);
 	if (!mem) {
@@ -2381,25 +2387,24 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!of_have_populated_dt())
-			return;
+		if (!np)
+			return -ENXIO;
 
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
-		if (np)
-			va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
 		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-		return;
+		return -ENXIO;
 	}
 
 	pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
 		 oh->name, va_start);
 
 	oh->_mpu_rt_va = va_start;
+	return 0;
 }
 
 /**
@@ -2412,18 +2417,28 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
  * registered at this point.  This is the first of two phases for
  * hwmod initialization.  Code called here does not touch any hardware
  * registers, it simply prepares internal data structures.  Returns 0
- * upon success or if the hwmod isn't registered, or -EINVAL upon
- * failure.
+ * upon success or if the hwmod isn't registered or if the hwmod's
+ * address space is not defined, or -EINVAL upon failure.
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
 	int r;
+	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (oh->class->sysc)
-		_init_mpu_rt_base(oh, NULL);
+	if (of_have_populated_dt())
+		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+
+	if (oh->class->sysc) {
+		r = _init_mpu_rt_base(oh, NULL, np);
+		if (r < 0) {
+			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
+			     oh->name);
+			return 0;
+		}
+	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {
@@ -2431,6 +2446,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 		return -EINVAL;
 	}
 
+	if (np)
+		if (of_find_property(np, "ti,no-reset-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_RESET;
+		if (of_find_property(np, "ti,no-idle-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_IDLE;
+
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
 	return 0;
@@ -4113,7 +4134,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
-	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
@@ -4123,6 +4144,14 @@ void __init omap_hwmod_init(void)
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
+	} else if (soc_is_am43xx()) {
+		soc_ops.enable_module = _omap4_enable_module;
+		soc_ops.disable_module = _omap4_disable_module;
+		soc_ops.wait_target_ready = _omap4_wait_target_ready;
+		soc_ops.assert_hardreset = _omap4_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
 		soc_ops.enable_module = _am33xx_enable_module;
 		soc_ops.disable_module = _am33xx_disable_module;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index e1482a9b3bc2..0f97d635ff90 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -751,6 +751,8 @@ extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
 extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
+extern int dra7xx_hwmod_init(void);
+int am43xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
new file mode 100644
index 000000000000..130332c0534d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -0,0 +1,163 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Data common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+
+extern struct omap_hwmod_ocp_if am33xx_mpu__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_s;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr;
+extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
+extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
+extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
+
+extern struct omap_hwmod am33xx_l3_main_hwmod;
+extern struct omap_hwmod am33xx_l3_s_hwmod;
+extern struct omap_hwmod am33xx_l3_instr_hwmod;
+extern struct omap_hwmod am33xx_l4_ls_hwmod;
+extern struct omap_hwmod am33xx_l4_wkup_hwmod;
+extern struct omap_hwmod am33xx_mpu_hwmod;
+extern struct omap_hwmod am33xx_pruss_hwmod;
+extern struct omap_hwmod am33xx_gfx_hwmod;
+extern struct omap_hwmod am33xx_prcm_hwmod;
+extern struct omap_hwmod am33xx_aes0_hwmod;
+extern struct omap_hwmod am33xx_sha0_hwmod;
+extern struct omap_hwmod am33xx_ocmcram_hwmod;
+extern struct omap_hwmod am33xx_smartreflex0_hwmod;
+extern struct omap_hwmod am33xx_smartreflex1_hwmod;
+extern struct omap_hwmod am33xx_cpgmac0_hwmod;
+extern struct omap_hwmod am33xx_mdio_hwmod;
+extern struct omap_hwmod am33xx_dcan0_hwmod;
+extern struct omap_hwmod am33xx_dcan1_hwmod;
+extern struct omap_hwmod am33xx_elm_hwmod;
+extern struct omap_hwmod am33xx_epwmss0_hwmod;
+extern struct omap_hwmod am33xx_ecap0_hwmod;
+extern struct omap_hwmod am33xx_eqep0_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
+extern struct omap_hwmod am33xx_epwmss1_hwmod;
+extern struct omap_hwmod am33xx_ecap1_hwmod;
+extern struct omap_hwmod am33xx_eqep1_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
+extern struct omap_hwmod am33xx_epwmss2_hwmod;
+extern struct omap_hwmod am33xx_ecap2_hwmod;
+extern struct omap_hwmod am33xx_eqep2_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
+extern struct omap_hwmod am33xx_gpio1_hwmod;
+extern struct omap_hwmod am33xx_gpio2_hwmod;
+extern struct omap_hwmod am33xx_gpio3_hwmod;
+extern struct omap_hwmod am33xx_gpmc_hwmod;
+extern struct omap_hwmod am33xx_i2c1_hwmod;
+extern struct omap_hwmod am33xx_i2c2_hwmod;
+extern struct omap_hwmod am33xx_i2c3_hwmod;
+extern struct omap_hwmod am33xx_mailbox_hwmod;
+extern struct omap_hwmod am33xx_mcasp0_hwmod;
+extern struct omap_hwmod am33xx_mcasp1_hwmod;
+extern struct omap_hwmod am33xx_mmc0_hwmod;
+extern struct omap_hwmod am33xx_mmc1_hwmod;
+extern struct omap_hwmod am33xx_mmc2_hwmod;
+extern struct omap_hwmod am33xx_rtc_hwmod;
+extern struct omap_hwmod am33xx_spi0_hwmod;
+extern struct omap_hwmod am33xx_spi1_hwmod;
+extern struct omap_hwmod am33xx_spinlock_hwmod;
+extern struct omap_hwmod am33xx_timer1_hwmod;
+extern struct omap_hwmod am33xx_timer2_hwmod;
+extern struct omap_hwmod am33xx_timer3_hwmod;
+extern struct omap_hwmod am33xx_timer4_hwmod;
+extern struct omap_hwmod am33xx_timer5_hwmod;
+extern struct omap_hwmod am33xx_timer6_hwmod;
+extern struct omap_hwmod am33xx_timer7_hwmod;
+extern struct omap_hwmod am33xx_tpcc_hwmod;
+extern struct omap_hwmod am33xx_tptc0_hwmod;
+extern struct omap_hwmod am33xx_tptc1_hwmod;
+extern struct omap_hwmod am33xx_tptc2_hwmod;
+extern struct omap_hwmod am33xx_uart1_hwmod;
+extern struct omap_hwmod am33xx_uart2_hwmod;
+extern struct omap_hwmod am33xx_uart3_hwmod;
+extern struct omap_hwmod am33xx_uart4_hwmod;
+extern struct omap_hwmod am33xx_uart5_hwmod;
+extern struct omap_hwmod am33xx_uart6_hwmod;
+extern struct omap_hwmod am33xx_wd_timer1_hwmod;
+
+extern struct omap_hwmod_class am33xx_l4_hwmod_class;
+extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
+extern struct omap_hwmod_class am33xx_control_hwmod_class;
+extern struct omap_hwmod_class am33xx_gpio_hwmod_class;
+extern struct omap_hwmod_class am33xx_timer_hwmod_class;
+extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
+extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
+extern struct omap_hwmod_class am33xx_spi_hwmod_class;
+
+extern struct omap_gpio_dev_attr gpio_dev_attr;
+extern struct omap2_mcspi_dev_attr mcspi_attrib;
+
+void omap_hwmod_am33xx_reg(void);
+void omap_hwmod_am43xx_reg(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
new file mode 100644
index 000000000000..e2db378b849e
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -0,0 +1,643 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Interconnects common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sizes.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+
+/* mpu -> l3 main */
+struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> l3 s */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_s_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 per/ls */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_ls_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 wkup */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 instr */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_instr_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> prcm */
+struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_prcm_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l3 main*/
+struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* pru-icss -> l3 main */
+struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
+	.master		= &am33xx_pruss_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gfx -> l3 main */
+struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
+	.master		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> gfx */
+struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_gfx_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> rtc */
+struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_rtc_hwmod,
+	.clk		= "clkdiv32k_ick",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per/ls -> DCAN0 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> DCAN1 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> GPIO2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio3 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio4 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+	.master		= &am33xx_cpgmac0_hwmod,
+	.slave		= &am33xx_mdio_hwmod,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
+	{
+		.pa_start	= 0x48080000,
+		.pa_end		= 0x48080000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_elm_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_elm_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
+	{
+		.pa_start	= 0x48300000,
+		.pa_end		= 0x48300000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ecap0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_eqep0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ehrpwm0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+
+static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
+	{
+		.pa_start	= 0x48302000,
+		.pa_end		= 0x48302000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ecap1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_eqep1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ehrpwm1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ecap2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_eqep2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ehrpwm2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3s cfg -> gpmc */
+static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x50000000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_gpmc_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_gpmc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* i2c2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x480C8000,
+		.pa_end		= 0x480C8000 + (SZ_4K - 1),
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4 ls -> mailbox */
+struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mailbox_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mailbox_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> spinlock */
+struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spinlock_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp0 */
+static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
+	{
+		.pa_start	= 0x48038000,
+		.pa_end		= 0x48038000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp1 */
+static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
+	{
+		.pa_start	= 0x4803C000,
+		.pa_end		= 0x4803C000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc0 */
+static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
+	{
+		.pa_start	= 0x48060100,
+		.pa_end		= 0x48060100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc1 */
+static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
+	{
+		.pa_start	= 0x481d8100,
+		.pa_end		= 0x481d8100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mmc2 */
+static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
+	{
+		.pa_start	= 0x47810100,
+		.pa_end		= 0x47810100 + SZ_64K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mmc2_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mmc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi0 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi1 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer7 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer7_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc */
+struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tpcc_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc0 */
+static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
+	{
+		.pa_start	= 0x49800000,
+		.pa_end		= 0x49800000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc0_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc1 */
+static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
+	{
+		.pa_start	= 0x49900000,
+		.pa_end		= 0x49900000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc1_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc2 */
+static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
+	{
+		.pa_start	= 0x49a00000,
+		.pa_end		= 0x49a00000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc2_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> ocmc */
+struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_ocmcram_hwmod,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> sha0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
+	{
+		.pa_start	= 0x53100000,
+		.pa_end		= 0x53100000 + SZ_512 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_sha0_hwmod,
+	.clk		= "sha0_fck",
+	.addr		= am33xx_sha0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> AES0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
+	{
+		.pa_start	= 0x53500000,
+		.pa_end		= 0x53500000 + SZ_1M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_aes0_hwmod,
+	.clk		= "aes0_fck",
+	.addr		= am33xx_aes0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
new file mode 100644
index 000000000000..0f178623e7da
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -0,0 +1,1469 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "wd_timer.h"
+#include "cm33xx.h"
+#include "prm33xx.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
+#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
+#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+
+/*
+ * 'l3' class
+ * instance(s): l3_main, l3_s, l3_instr
+ */
+static struct omap_hwmod_class am33xx_l3_hwmod_class = {
+	.name		= "l3",
+};
+
+struct omap_hwmod am33xx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l3_s */
+struct omap_hwmod am33xx_l3_s_hwmod = {
+	.name		= "l3_s",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+};
+
+/* l3_instr */
+struct omap_hwmod am33xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
+ */
+struct omap_hwmod_class am33xx_l4_hwmod_class = {
+	.name		= "l4",
+};
+
+/* l4_ls */
+struct omap_hwmod am33xx_l4_ls_hwmod = {
+	.name		= "l4_ls",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_wkup */
+struct omap_hwmod am33xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mpu' class
+ */
+static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+struct omap_hwmod am33xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &am33xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'wakeup m3' class
+ * Wakeup controller sub-system under wakeup domain
+ */
+struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
+	.name		= "wkup_m3",
+};
+
+/*
+ * 'pru-icss' class
+ * Programmable Real-Time Unit and Industrial Communication Subsystem
+ */
+static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
+	.name	= "pruss",
+};
+
+static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
+	{ .name = "pruss", .rst_shift = 1 },
+};
+
+/* pru-icss */
+/* Pseudo hwmod for reset control purpose only */
+struct omap_hwmod am33xx_pruss_hwmod = {
+	.name		= "pruss",
+	.class		= &am33xx_pruss_hwmod_class,
+	.clkdm_name	= "pruss_ocp_clkdm",
+	.main_clk	= "pruss_ocp_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_pruss_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
+};
+
+/* gfx */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
+	.name	= "gfx",
+};
+
+static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
+	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
+};
+
+struct omap_hwmod am33xx_gfx_hwmod = {
+	.name		= "gfx",
+	.class		= &am33xx_gfx_hwmod_class,
+	.clkdm_name	= "gfx_l3_clkdm",
+	.main_clk	= "gfx_fck_div_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_gfx_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (whole prcm infrastructure)
+ */
+static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
+	.name	= "prcm",
+};
+
+/* prcm */
+struct omap_hwmod am33xx_prcm_hwmod = {
+	.name		= "prcm",
+	.class		= &am33xx_prcm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'aes0' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
+	.rev_offs	= 0x80,
+	.sysc_offs	= 0x84,
+	.syss_offs	= 0x88,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
+	.name		= "aes0",
+	.sysc		= &am33xx_aes0_sysc,
+};
+
+struct omap_hwmod am33xx_aes0_hwmod = {
+	.name		= "aes",
+	.class		= &am33xx_aes0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "aes0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* sha0 HIB2 (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
+	.rev_offs	= 0x100,
+	.sysc_offs	= 0x110,
+	.syss_offs	= 0x114,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
+	.name		= "sha0",
+	.sysc		= &am33xx_sha0_sysc,
+};
+
+struct omap_hwmod am33xx_sha0_hwmod = {
+	.name		= "sham",
+	.class		= &am33xx_sha0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ocmcram */
+static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
+	.name = "ocmcram",
+};
+
+struct omap_hwmod am33xx_ocmcram_hwmod = {
+	.name		= "ocmcram",
+	.class		= &am33xx_ocmcram_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'smartreflex' class */
+static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
+	.name		= "smartreflex",
+};
+
+/* smartreflex0 */
+struct omap_hwmod am33xx_smartreflex0_hwmod = {
+	.name		= "smartreflex0",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* smartreflex1 */
+struct omap_hwmod am33xx_smartreflex1_hwmod = {
+	.name		= "smartreflex1",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'control' module class
+ */
+struct omap_hwmod_class am33xx_control_hwmod_class = {
+	.name		= "control",
+};
+
+/*
+ * 'cpgmac' class
+ * cpsw/cpgmac sub system
+ */
+static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x8,
+	.syss_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+			   MSTANDBY_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
+	.name		= "cpgmac0",
+	.sysc		= &am33xx_cpgmac_sysc,
+};
+
+struct omap_hwmod am33xx_cpgmac0_hwmod = {
+	.name		= "cpgmac0",
+	.class		= &am33xx_cpgmac0_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * mdio class
+ */
+static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
+	.name		= "davinci_mdio",
+};
+
+struct omap_hwmod am33xx_mdio_hwmod = {
+	.name		= "davinci_mdio",
+	.class		= &am33xx_mdio_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.main_clk	= "cpsw_125mhz_gclk",
+};
+
+/*
+ * dcan class
+ */
+static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
+	.name = "d_can",
+};
+
+/* dcan0 */
+struct omap_hwmod am33xx_dcan0_hwmod = {
+	.name		= "d_can0",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan1 */
+struct omap_hwmod am33xx_dcan1_hwmod = {
+	.name		= "d_can1",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* elm */
+static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_elm_hwmod_class = {
+	.name		= "elm",
+	.sysc		= &am33xx_elm_sysc,
+};
+
+struct omap_hwmod am33xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &am33xx_elm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* pwmss  */
+static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
+	.name		= "epwmss",
+	.sysc		= &am33xx_epwmss_sysc,
+};
+
+static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
+	.name		= "ecap",
+};
+
+static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
+	.name		= "eqep",
+};
+
+struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
+	.name		= "ehrpwm",
+};
+
+/* epwmss0 */
+struct omap_hwmod am33xx_epwmss0_hwmod = {
+	.name		= "epwmss0",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap0 */
+struct omap_hwmod am33xx_ecap0_hwmod = {
+	.name		= "ecap0",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep0 */
+struct omap_hwmod am33xx_eqep0_hwmod = {
+	.name		= "eqep0",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm0 */
+struct omap_hwmod am33xx_ehrpwm0_hwmod = {
+	.name		= "ehrpwm0",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss1 */
+struct omap_hwmod am33xx_epwmss1_hwmod = {
+	.name		= "epwmss1",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap1 */
+struct omap_hwmod am33xx_ecap1_hwmod = {
+	.name		= "ecap1",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep1 */
+struct omap_hwmod am33xx_eqep1_hwmod = {
+	.name		= "eqep1",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm1 */
+struct omap_hwmod am33xx_ehrpwm1_hwmod = {
+	.name		= "ehrpwm1",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss2 */
+struct omap_hwmod am33xx_epwmss2_hwmod = {
+	.name		= "epwmss2",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap2 */
+struct omap_hwmod am33xx_ecap2_hwmod = {
+	.name		= "ecap2",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep2 */
+struct omap_hwmod am33xx_eqep2_hwmod = {
+	.name		= "eqep2",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm2 */
+struct omap_hwmod am33xx_ehrpwm2_hwmod = {
+	.name		= "ehrpwm2",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/*
+ * 'gpio' class: for gpio 0,1,2,3
+ */
+static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+	.name		= "gpio",
+	.sysc		= &am33xx_gpio_sysc,
+	.rev		= 2,
+};
+
+struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio1_hwmod = {
+	.name		= "gpio2",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio2_hwmod = {
+	.name		= "gpio3",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio3_hwmod = {
+	.name		= "gpio4",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpmc */
+static struct omap_hwmod_class_sysconfig gpmc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
+	.name		= "gpmc",
+	.sysc		= &gpmc_sysc,
+};
+
+struct omap_hwmod am33xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &am33xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l3s_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'i2c' class */
+static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &am33xx_i2c_sysc,
+	.rev		= OMAP_I2C_IP_VERSION_2,
+	.reset		= &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+struct omap_hwmod am33xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &am33xx_mailbox_sysc,
+};
+
+struct omap_hwmod am33xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &am33xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mcasp' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
+	.name		= "mcasp",
+	.sysc		= &am33xx_mcasp_sysc,
+};
+
+/* mcasp0 */
+struct omap_hwmod am33xx_mcasp0_hwmod = {
+	.name		= "mcasp0",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* mcasp1 */
+struct omap_hwmod am33xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'mmc' class */
+static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
+	.rev_offs	= 0x1fc,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
+	.name		= "mmc",
+	.sysc		= &am33xx_mmc_sysc,
+};
+
+/* mmc0 */
+static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc0_hwmod = {
+	.name		= "mmc1",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc0_dev_attr,
+};
+
+/* mmc1 */
+static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc1_hwmod = {
+	.name		= "mmc2",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+struct omap_hwmod am33xx_mmc2_hwmod = {
+	.name		= "mmc3",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc2_dev_attr,
+};
+
+/*
+ * 'rtc' class
+ * rtc subsystem
+ */
+static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
+	.rev_offs	= 0x0074,
+	.sysc_offs	= 0x0078,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &am33xx_rtc_sysc,
+};
+
+struct omap_hwmod am33xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &am33xx_rtc_hwmod_class,
+	.clkdm_name	= "l4_rtc_clkdm",
+	.main_clk	= "clk_32768_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'spi' class */
+static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0110,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_spi_hwmod_class = {
+	.name		= "mcspi",
+	.sysc		= &am33xx_mcspi_sysc,
+	.rev		= OMAP4_MCSPI_REV,
+};
+
+/* spi0 */
+struct omap2_mcspi_dev_attr mcspi_attrib = {
+	.num_chipselect	= 2,
+};
+struct omap_hwmod am33xx_spi0_hwmod = {
+	.name		= "spi0",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/* spi1 */
+struct omap_hwmod am33xx_spi1_hwmod = {
+	.name		= "spi1",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the
+ * processes running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
+	.name		= "spinlock",
+	.sysc		= &am33xx_spinlock_sysc,
+};
+
+struct omap_hwmod am33xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &am33xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'timer 2-7' class */
+static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_timer_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer_sysc,
+};
+
+/* timer1 1ms */
+static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer1ms_sysc,
+};
+
+struct omap_hwmod am33xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &am33xx_timer1ms_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "timer1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer2_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer3_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer4_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer5_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer6_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer7_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tpcc */
+static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+struct omap_hwmod am33xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &am33xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+/* 'tptc' class */
+static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
+	.name		= "tptc",
+	.sysc		= &am33xx_tptc_sysc,
+};
+
+/* tptc0 */
+struct omap_hwmod am33xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+struct omap_hwmod am33xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc2 */
+struct omap_hwmod am33xx_tptc2_hwmod = {
+	.name		= "tptc2",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'uart' class */
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name		= "uart",
+	.sysc		= &uart_sysc,
+};
+
+struct omap_hwmod am33xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &uart_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+struct omap_hwmod am33xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &wdt_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+};
+
+/*
+ * XXX: device.c file uses hardcoded name for watchdog timer
+ * driver "wd_timer2, so we are also using same name as of now...
+ */
+struct omap_hwmod am33xx_wd_timer1_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &am33xx_wd_timer_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wdt1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static void omap_hwmod_am33xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am33xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am33xx_reg(void)
+{
+	omap_hwmod_am33xx_clkctrl();
+	omap_hwmod_am33xx_rst();
+}
+
+static void omap_hwmod_am43xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am43xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am43xx_reg(void)
+{
+	omap_hwmod_am43xx_clkctrl();
+	omap_hwmod_am43xx_rst();
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index eb2f3b93b51c..6b406ca4bd3b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -29,6 +29,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
 
 /*
  * IP blocks
@@ -52,7 +53,7 @@ static struct omap_hwmod am33xx_emif_hwmod = {
 	.name		= "emif",
 	.class		= &am33xx_emif_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_ddr_m2_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -62,79 +63,12 @@ static struct omap_hwmod am33xx_emif_hwmod = {
 	},
 };
 
-/*
- * 'l3' class
- * instance(s): l3_main, l3_s, l3_instr
- */
-static struct omap_hwmod_class am33xx_l3_hwmod_class = {
-	.name		= "l3",
-};
-
-static struct omap_hwmod am33xx_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* l3_s */
-static struct omap_hwmod am33xx_l3_s_hwmod = {
-	.name		= "l3_s",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-};
-
-/* l3_instr */
-static struct omap_hwmod am33xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
- */
-static struct omap_hwmod_class am33xx_l4_hwmod_class = {
-	.name		= "l4",
-};
-
-/* l4_ls */
-static struct omap_hwmod am33xx_l4_ls_hwmod = {
-	.name		= "l4_ls",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* l4_hs */
 static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4hs_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l4hs_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -144,50 +78,6 @@ static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	},
 };
 
-
-/* l4_wkup */
-static struct omap_hwmod am33xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mpu' class
- */
-static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-static struct omap_hwmod am33xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &am33xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'wakeup m3' class
- * Wakeup controller sub-system under wakeup domain
- */
-static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
-	.name		= "wkup_m3",
-};
-
 static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
 	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
 };
@@ -213,78 +103,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = {
 };
 
 /*
- * 'pru-icss' class
- * Programmable Real-Time Unit and Industrial Communication Subsystem
- */
-static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
-	.name	= "pruss",
-};
-
-static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
-	{ .name = "pruss", .rst_shift = 1 },
-};
-
-/* pru-icss */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod am33xx_pruss_hwmod = {
-	.name		= "pruss",
-	.class		= &am33xx_pruss_hwmod_class,
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.main_clk	= "pruss_ocp_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_PER_RSTCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_pruss_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
-};
-
-/* gfx */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
-	.name	= "gfx",
-};
-
-static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
-	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
-};
-
-static struct omap_hwmod am33xx_gfx_hwmod = {
-	.name		= "gfx",
-	.class		= &am33xx_gfx_hwmod_class,
-	.clkdm_name	= "gfx_l3_clkdm",
-	.main_clk	= "gfx_fck_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_GFX_RSTCTRL_OFFSET,
-			.rstst_offs	= AM33XX_RM_GFX_RSTST_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_gfx_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
-};
-
-/*
- * 'prcm' class
- * power and reset manager (whole prcm infrastructure)
- */
-static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
-	.name	= "prcm",
-};
-
-/* prcm */
-static struct omap_hwmod am33xx_prcm_hwmod = {
-	.name		= "prcm",
-	.class		= &am33xx_prcm_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-};
-
-/*
  * 'adc/tsc' class
  * TouchScreen Controller (Anolog-To-Digital Converter)
  */
@@ -325,7 +143,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = {
  *
  *    - cEFUSE (doesn't fall under any ocp_if)
  *    - clkdiv32k
- *    - debugss
  *    - ocp watch point
  */
 #if 0
@@ -369,27 +186,6 @@ static struct omap_hwmod am33xx_clkdiv32k_hwmod = {
 	},
 };
 
-/*
- * 'debugss' class
- * debug sub system
- */
-static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
-	.name		= "debugss",
-};
-
-static struct omap_hwmod am33xx_debugss_hwmod = {
-	.name		= "debugss",
-	.class		= &am33xx_debugss_hwmod_class,
-	.clkdm_name	= "l3_aon_clkdm",
-	.main_clk	= "debugss_ick",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* ocpwp */
 static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = {
 	.name		= "ocpwp",
@@ -410,123 +206,38 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = {
 #endif
 
 /*
- * 'aes0' class
+ * 'debugss' class
+ * debug sub system
  */
-static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
-	.name		= "aes0",
-	.sysc		= &am33xx_aes0_sysc,
-};
-
-static struct omap_hwmod am33xx_aes0_hwmod = {
-	.name		= "aes",
-	.class		= &am33xx_aes0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "aes0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
-	.name		= "sha0",
-	.sysc		= &am33xx_sha0_sysc,
-};
-
-static struct omap_hwmod am33xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &am33xx_sha0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ocmcram */
-static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
-	.name = "ocmcram",
+static struct omap_hwmod_opt_clk debugss_opt_clks[] = {
+	{ .role = "dbg_sysclk", .clk = "dbg_sysclk_ck" },
+	{ .role = "dbg_clka", .clk = "dbg_clka_ck" },
 };
 
-static struct omap_hwmod am33xx_ocmcram_hwmod = {
-	.name		= "ocmcram",
-	.class		= &am33xx_ocmcram_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'smartreflex' class */
-static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
-	.name		= "smartreflex",
-};
-
-/* smartreflex0 */
-static struct omap_hwmod am33xx_smartreflex0_hwmod = {
-	.name		= "smartreflex0",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
+static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
+	.name		= "debugss",
 };
 
-/* smartreflex1 */
-static struct omap_hwmod am33xx_smartreflex1_hwmod = {
-	.name		= "smartreflex1",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex1_fck",
+static struct omap_hwmod am33xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &am33xx_debugss_hwmod_class,
+	.clkdm_name	= "l3_aon_clkdm",
+	.main_clk	= "trace_clk_div_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET,
+			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-};
-
-/*
- * 'control' module class
- */
-static struct omap_hwmod_class am33xx_control_hwmod_class = {
-	.name		= "control",
+	.opt_clks	= debugss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(debugss_opt_clks),
 };
 
 static struct omap_hwmod am33xx_control_hwmod = {
 	.name		= "control",
 	.class		= &am33xx_control_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_m4_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -536,288 +247,6 @@ static struct omap_hwmod am33xx_control_hwmod = {
 	},
 };
 
-/*
- * 'cpgmac' class
- * cpsw/cpgmac sub system
- */
-static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			   MSTANDBY_NO),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &am33xx_cpgmac_sysc,
-};
-
-static struct omap_hwmod am33xx_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &am33xx_cpgmac0_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "cpsw_125mhz_gclk",
-	.mpu_rt_idx	= 1,
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * mdio class
- */
-static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod am33xx_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &am33xx_mdio_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
-/*
- * dcan class
- */
-static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
-	.name = "d_can",
-};
-
-/* dcan0 */
-static struct omap_hwmod am33xx_dcan0_hwmod = {
-	.name		= "d_can0",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dcan1 */
-static struct omap_hwmod am33xx_dcan1_hwmod = {
-	.name		= "d_can1",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* elm */
-static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_elm_hwmod_class = {
-	.name		= "elm",
-	.sysc		= &am33xx_elm_sysc,
-};
-
-static struct omap_hwmod am33xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &am33xx_elm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_ELM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pwmss  */
-static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
-	.name		= "epwmss",
-	.sysc		= &am33xx_epwmss_sysc,
-};
-
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
-	.name		= "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
-	.name		= "eqep",
-};
-
-static struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
-	.name		= "ehrpwm",
-};
-
-/* epwmss0 */
-static struct omap_hwmod am33xx_epwmss0_hwmod = {
-	.name		= "epwmss0",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap0 */
-static struct omap_hwmod am33xx_ecap0_hwmod = {
-	.name		= "ecap0",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep0 */
-static struct omap_hwmod am33xx_eqep0_hwmod = {
-	.name		= "eqep0",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-static struct omap_hwmod am33xx_ehrpwm0_hwmod = {
-	.name		= "ehrpwm0",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss1 */
-static struct omap_hwmod am33xx_epwmss1_hwmod = {
-	.name		= "epwmss1",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap1 */
-static struct omap_hwmod am33xx_ecap1_hwmod = {
-	.name		= "ecap1",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep1 */
-static struct omap_hwmod am33xx_eqep1_hwmod = {
-	.name		= "eqep1",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-static struct omap_hwmod am33xx_ehrpwm1_hwmod = {
-	.name		= "ehrpwm1",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss2 */
-static struct omap_hwmod am33xx_epwmss2_hwmod = {
-	.name		= "epwmss2",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap2 */
-static struct omap_hwmod am33xx_ecap2_hwmod = {
-	.name		= "ecap2",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep2 */
-static struct omap_hwmod am33xx_eqep2_hwmod = {
-	.name		= "eqep2",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
-	.name		= "ehrpwm2",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/*
- * 'gpio' class: for gpio 0,1,2,3
- */
-static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
-	.name		= "gpio",
-	.sysc		= &am33xx_gpio_sysc,
-	.rev		= 2,
-};
-
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio0 */
 static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio0_dbclk" },
@@ -840,174 +269,6 @@ static struct omap_hwmod am33xx_gpio0_hwmod = {
 	.dev_attr	= &gpio_dev_attr,
 };
 
-/* gpio1 */
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio1_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio1_hwmod = {
-	.name		= "gpio2",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio2_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio2_hwmod = {
-	.name		= "gpio3",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio3_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio3_hwmod = {
-	.name		= "gpio4",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpmc */
-static struct omap_hwmod_class_sysconfig gpmc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
-	.name		= "gpmc",
-	.sysc		= &gpmc_sysc,
-};
-
-static struct omap_hwmod am33xx_gpmc_hwmod = {
-	.name		= "gpmc",
-	.class		= &am33xx_gpmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3s_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'i2c' class */
-static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0090,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &am33xx_i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_2,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c1_hwmod = {
-	.name		= "i2c1",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c2_hwmod = {
-	.name		= "i2c2",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c3 */
-static struct omap_hwmod am33xx_i2c3_hwmod = {
-	.name		= "i2c3",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-
 /* lcdc */
 static struct omap_hwmod_class_sysconfig lcdc_sysc = {
 	.rev_offs	= 0x0,
@@ -1037,600 +298,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = {
 };
 
 /*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors using a
- * queued mailbox-interrupt mechanism.
- */
-static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
-	.name	= "mailbox",
-	.sysc	= &am33xx_mailbox_sysc,
-};
-
-static struct omap_hwmod am33xx_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &am33xx_mailbox_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mcasp' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
-	.name		= "mcasp",
-	.sysc		= &am33xx_mcasp_sysc,
-};
-
-/* mcasp0 */
-static struct omap_hwmod am33xx_mcasp0_hwmod = {
-	.name		= "mcasp0",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcasp1 */
-static struct omap_hwmod am33xx_mcasp1_hwmod = {
-	.name		= "mcasp1",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'mmc' class */
-static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
-	.name		= "mmc",
-	.sysc		= &am33xx_mmc_sysc,
-};
-
-/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc0_hwmod = {
-	.name		= "mmc1",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc0_dev_attr,
-};
-
-/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc1_hwmod = {
-	.name		= "mmc2",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc1_dev_attr,
-};
-
-/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-static struct omap_hwmod am33xx_mmc2_hwmod = {
-	.name		= "mmc3",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc2_dev_attr,
-};
-
-/*
- * 'rtc' class
- * rtc subsystem
- */
-static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
-	.rev_offs	= 0x0074,
-	.sysc_offs	= 0x0078,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
-			  SIDLE_SMART | SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
-	.name		= "rtc",
-	.sysc		= &am33xx_rtc_sysc,
-};
-
-static struct omap_hwmod am33xx_rtc_hwmod = {
-	.name		= "rtc",
-	.class		= &am33xx_rtc_hwmod_class,
-	.clkdm_name	= "l4_rtc_clkdm",
-	.main_clk	= "clk_32768_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'spi' class */
-static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0110,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_spi_hwmod_class = {
-	.name		= "mcspi",
-	.sysc		= &am33xx_mcspi_sysc,
-	.rev		= OMAP4_MCSPI_REV,
-};
-
-/* spi0 */
-static struct omap2_mcspi_dev_attr mcspi_attrib = {
-	.num_chipselect	= 2,
-};
-static struct omap_hwmod am33xx_spi0_hwmod = {
-	.name		= "spi0",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/* spi1 */
-static struct omap_hwmod am33xx_spi1_hwmod = {
-	.name		= "spi1",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the
- * processes running on multiple processors
- */
-static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
-	.name		= "spinlock",
-};
-
-static struct omap_hwmod am33xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &am33xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'timer 2-7' class */
-static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_timer_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer_sysc,
-};
-
-/* timer1 1ms */
-static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer1ms_sysc,
-};
-
-static struct omap_hwmod am33xx_timer1_hwmod = {
-	.name		= "timer1",
-	.class		= &am33xx_timer1ms_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "timer1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer2_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer3_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer4_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer5_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer6_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer7_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tpcc */
-static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod am33xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &am33xx_tpcc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-/* 'tptc' class */
-static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
-	.name		= "tptc",
-	.sysc		= &am33xx_tptc_sysc,
-};
-
-/* tptc0 */
-static struct omap_hwmod am33xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc1 */
-static struct omap_hwmod am33xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc2 */
-static struct omap_hwmod am33xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'uart' class */
-static struct omap_hwmod_class_sysconfig uart_sysc = {
-	.rev_offs	= 0x50,
-	.sysc_offs	= 0x54,
-	.syss_offs	= 0x58,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class uart_class = {
-	.name		= "uart",
-	.sysc		= &uart_sysc,
-};
-
-/* uart1 */
-static struct omap_hwmod am33xx_uart1_hwmod = {
-	.name		= "uart1",
-	.class		= &uart_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart2_hwmod = {
-	.name		= "uart2",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* uart3 */
-static struct omap_hwmod am33xx_uart3_hwmod = {
-	.name		= "uart3",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart4_hwmod = {
-	.name		= "uart4",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart5_hwmod = {
-	.name		= "uart5",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart6_hwmod = {
-	.name		= "uart6",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'wd_timer' class */
-static struct omap_hwmod_class_sysconfig wdt_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &wdt_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable,
-};
-
-/*
- * XXX: device.c file uses hardcoded name for watchdog timer
- * driver "wd_timer2, so we are also using same name as of now...
- */
-static struct omap_hwmod am33xx_wd_timer1_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &am33xx_wd_timer_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "wdt1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'usb_otg' class
  * high-speed on-the-go universal serial bus (usb_otg) controller
  */
@@ -1684,14 +351,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> l4 hs */
 static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -1700,62 +359,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> l3 s */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_s_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 per/ls */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_ls_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 wkup */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_wkup_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> l3 instr */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_instr_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> prcm */
-static struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_prcm_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l3 main*/
-static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* pru-icss -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
-	.master		= &am33xx_pruss_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* wkup m3 -> l4 wkup */
 static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
 	.master		= &am33xx_wkup_m3_hwmod,
@@ -1764,14 +367,6 @@ static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* gfx -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
-	.master		= &am33xx_gfx_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4 wkup -> wkup m3 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1788,12 +383,22 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> gfx */
-static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+/* l3_main -> debugss */
+static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
+	{
+		.pa_start	= 0x4b000000,
+		.pa_end		= 0x4b000000 + SZ_16M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
 	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_debugss_hwmod,
 	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.addr		= am33xx_debugss_addrs,
+	.user		= OCP_USER_MPU,
 };
 
 /* l4 wkup -> smartreflex0 */
@@ -1820,54 +425,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 wkup -> rtc */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
-	.master		= &am33xx_l4_wkup_hwmod,
-	.slave		= &am33xx_rtc_hwmod,
-	.clk		= "clkdiv32k_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per/ls -> DCAN0 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> DCAN1 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> GPIO2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio3 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio4 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* L4 WKUP -> I2C1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1909,177 +466,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
-	.master		= &am33xx_cpgmac0_hwmod,
-	.slave		= &am33xx_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_elm_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_elm_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
-	{
-		.pa_start	= 0x48300000,
-		.pa_end		= 0x48300000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ecap0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_eqep0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ehrpwm0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-
-static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
-	{
-		.pa_start	= 0x48302000,
-		.pa_end		= 0x48302000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ecap1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_eqep1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ehrpwm1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss2_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ecap2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_eqep2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ehrpwm2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x50000000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_gpmc_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_gpmc_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* i2c2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
 	{
 		.pa_start	= 0x4830E000,
@@ -2097,138 +483,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x480C8000,
-		.pa_end		= 0x480C8000 + (SZ_4K - 1),
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4 ls -> mailbox */
-static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mailbox_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mailbox_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> spinlock */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spinlock_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp0 */
-static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
-	{
-		.pa_start	= 0x48038000,
-		.pa_end		= 0x48038000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp1 */
-static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
-	{
-		.pa_start	= 0x4803C000,
-		.pa_end		= 0x4803C000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc0 */
-static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
-	{
-		.pa_start	= 0x48060100,
-		.pa_end		= 0x48060100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc1 */
-static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x481d8100,
-		.pa_end		= 0x481d8100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 s -> mmc2 */
-static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x47810100,
-		.pa_end		= 0x47810100 + SZ_64K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_mmc2_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_mmc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi0 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi1 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2237,116 +491,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 per -> timer2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer7 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer7_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tpcc_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc0 */
-static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
-	{
-		.pa_start	= 0x49800000,
-		.pa_end		= 0x49800000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc0_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc1 */
-static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
-	{
-		.pa_start	= 0x49900000,
-		.pa_end		= 0x49900000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc1_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc2 */
-static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
-	{
-		.pa_start	= 0x49a00000,
-		.pa_end		= 0x49a00000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc2_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> uart1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2355,46 +499,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 ls -> uart2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> wd_timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2413,47 +517,39 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
 	.flags		= OCPIF_SWSUP_IDLE,
 };
 
-/* l3 main -> ocmc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_ocmcram_hwmod,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> sha0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
-	{
-		.pa_start	= 0x53100000,
-		.pa_end		= 0x53100000 + SZ_512 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+	.rev_offs	= 0x1fe0,
+	.sysc_offs	= 0x1fe4,
+	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_sha0_hwmod,
-	.clk		= "sha0_fck",
-	.addr		= am33xx_sha0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &am33xx_rng_sysc,
 };
 
-/* l3 main -> AES0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
-	{
-		.pa_start	= 0x53500000,
-		.pa_end		= 0x53500000 + SZ_1M - 1,
-		.flags		= ADDR_TYPE_RT
+static struct omap_hwmod am33xx_rng_hwmod = {
+	.name		= "rng",
+	.class		= &am33xx_rng_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "rng_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
 	},
-	{ }
 };
 
-static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_aes0_hwmod,
-	.clk		= "aes0_fck",
-	.addr		= am33xx_aes0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_rng_hwmod,
+	.clk		= "rng_fck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
@@ -2470,6 +566,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_pruss__l3_main,
 	&am33xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
+	&am33xx_l3_main__debugss,
 	&am33xx_l4_wkup__wkup_m3,
 	&am33xx_l4_wkup__control,
 	&am33xx_l4_wkup__smartreflex0,
@@ -2534,11 +631,13 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
+	&am33xx_l4_per__rng,
 	NULL,
 };
 
 int __init am33xx_hwmod_init(void)
 {
+	omap_hwmod_am33xx_reg();
 	omap_hwmod_init();
 	return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs);
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0c3a427da544..9e56fabd7fa3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+	.name	= "ssi",
+	.sysc	= &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+	.name		= "ssi",
+	.class		= &omap34xx_ssi_hwmod_class,
+	.clkdm_name	= "core_l4_clkdm",
+	.main_clk	= "ssi_ssr_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_EN_SSI_SHIFT,
+			.module_offs		= CORE_MOD,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+		},
+	},
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_ssi_hwmod,
+	.clk		= "ssi_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 #ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
 #endif
+	&omap34xx_l4_core__ssi,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
new file mode 100644
index 000000000000..9002fca76699
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -0,0 +1,758 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod present only in AM43x and those that differ other than register
+ * offsets as compared to AM335x.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+/* IP blocks */
+static struct omap_hwmod am43xx_l4_hs_hwmod = {
+	.name		= "l4_hs",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4hs_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
+	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
+};
+
+static struct omap_hwmod am43xx_wkup_m3_hwmod = {
+	.name		= "wkup_m3",
+	.class		= &am33xx_wkup_m3_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	/* Keep hardreset asserted */
+	.flags		= HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM43XX_RM_WKUP_RSTCTRL_OFFSET,
+			.rstst_offs	= AM43XX_RM_WKUP_RSTST_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_wkup_m3_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
+};
+
+static struct omap_hwmod am43xx_control_hwmod = {
+	.name		= "control",
+	.class		= &am33xx_control_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio0_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio0_hwmod = {
+	.name		= "gpio1",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio0_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_synctimer_hwmod_class = {
+	.name	= "synctimer",
+	.sysc	= &am43xx_synctimer_sysc,
+};
+
+static struct omap_hwmod am43xx_synctimer_hwmod = {
+	.name		= "counter_32k",
+	.class		= &am43xx_synctimer_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "synctimer_32kclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer8_hwmod = {
+	.name		= "timer8",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer8_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer9_hwmod = {
+	.name		= "timer9",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer9_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer10_hwmod = {
+	.name		= "timer10",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer10_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer11_hwmod = {
+	.name		= "timer11",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer11_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_epwmss3_hwmod = {
+	.name		= "epwmss3",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
+	.name		= "ehrpwm3",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss4_hwmod = {
+	.name		= "epwmss4",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
+	.name		= "ehrpwm4",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss5_hwmod = {
+	.name		= "epwmss5",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
+	.name		= "ehrpwm5",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_spi2_hwmod = {
+	.name		= "spi2",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi3_hwmod = {
+	.name		= "spi3",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi4_hwmod = {
+	.name		= "spi4",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio4_hwmod = {
+	.name		= "gpio5",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio5_hwmod = {
+	.name		= "gpio6",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+};
+
+static struct omap_hwmod am43xx_ocp2scp0_hwmod = {
+	.name		= "ocp2scp0",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+				SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP | MSTANDBY_FORCE |
+				MSTANDBY_NO | MSTANDBY_SMART |
+				MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = {
+	.name	= "usb_otg_ss",
+	.sysc	= &am43xx_usb_otg_ss_sysc,
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = {
+	.name		= "usb_otg_ss0",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
+	.name		= "usb_otg_ss1",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = {
+	.sysc_offs      = 0x0010,
+	.sysc_flags     = SYSC_HAS_SIDLEMODE,
+	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP),
+	.sysc_fields    = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_qspi_hwmod_class = {
+	.name   = "qspi",
+	.sysc   = &am43xx_qspi_sysc,
+};
+
+static struct omap_hwmod am43xx_qspi_hwmod = {
+	.name           = "qspi",
+	.class          = &am43xx_qspi_hwmod_class,
+	.clkdm_name     = "l3s_clkdm",
+	.main_clk       = "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* Interfaces */
+static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am43xx_l4_hs_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_wkup_m3__l4_wkup = {
+	.master		= &am43xx_wkup_m3_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_wkup_m3_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_pruss_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_control_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_i2c1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_gpio0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
+	.master		= &am43xx_l4_hs_hwmod,
+	.slave		= &am33xx_cpgmac0_hwmod,
+	.clk		= "cpsw_125mhz_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_uart1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_wd_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_synctimer_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer8_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer9_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer10_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer11_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
+	.master		= &am43xx_epwmss3_hwmod,
+	.slave		= &am43xx_ehrpwm3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
+	.master		= &am43xx_epwmss4_hwmod,
+	.slave		= &am43xx_ehrpwm4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
+	.master		= &am43xx_epwmss5_hwmod,
+	.slave		= &am43xx_ehrpwm5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss0_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss1_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_qspi_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_wkup__synctimer,
+	&am43xx_l4_ls__timer8,
+	&am43xx_l4_ls__timer9,
+	&am43xx_l4_ls__timer10,
+	&am43xx_l4_ls__timer11,
+	&am43xx_l4_ls__epwmss3,
+	&am43xx_epwmss3__ehrpwm3,
+	&am43xx_l4_ls__epwmss4,
+	&am43xx_epwmss4__ehrpwm4,
+	&am43xx_l4_ls__epwmss5,
+	&am43xx_epwmss5__ehrpwm5,
+	&am43xx_l4_ls__mcspi2,
+	&am43xx_l4_ls__mcspi3,
+	&am43xx_l4_ls__mcspi4,
+	&am43xx_l4_ls__gpio4,
+	&am43xx_l4_ls__gpio5,
+	&am43xx_l3_main__pruss,
+	&am33xx_mpu__l3_main,
+	&am33xx_mpu__prcm,
+	&am33xx_l3_s__l4_ls,
+	&am33xx_l3_s__l4_wkup,
+	&am43xx_l3_main__l4_hs,
+	&am33xx_l3_main__l3_s,
+	&am33xx_l3_main__l3_instr,
+	&am33xx_l3_main__gfx,
+	&am33xx_l3_s__l3_main,
+	&am33xx_pruss__l3_main,
+	&am43xx_wkup_m3__l4_wkup,
+	&am33xx_gfx__l3_main,
+	&am43xx_l4_wkup__wkup_m3,
+	&am43xx_l4_wkup__control,
+	&am43xx_l4_wkup__smartreflex0,
+	&am43xx_l4_wkup__smartreflex1,
+	&am43xx_l4_wkup__uart1,
+	&am43xx_l4_wkup__timer1,
+	&am43xx_l4_wkup__i2c1,
+	&am43xx_l4_wkup__gpio0,
+	&am43xx_l4_wkup__wd_timer1,
+	&am43xx_l3_s__qspi,
+	&am33xx_l4_per__dcan0,
+	&am33xx_l4_per__dcan1,
+	&am33xx_l4_per__gpio1,
+	&am33xx_l4_per__gpio2,
+	&am33xx_l4_per__gpio3,
+	&am33xx_l4_per__i2c2,
+	&am33xx_l4_per__i2c3,
+	&am33xx_l4_per__mailbox,
+	&am33xx_l4_ls__mcasp0,
+	&am33xx_l4_ls__mcasp1,
+	&am33xx_l4_ls__mmc0,
+	&am33xx_l4_ls__mmc1,
+	&am33xx_l3_s__mmc2,
+	&am33xx_l4_ls__timer2,
+	&am33xx_l4_ls__timer3,
+	&am33xx_l4_ls__timer4,
+	&am33xx_l4_ls__timer5,
+	&am33xx_l4_ls__timer6,
+	&am33xx_l4_ls__timer7,
+	&am33xx_l3_main__tpcc,
+	&am33xx_l4_ls__uart2,
+	&am33xx_l4_ls__uart3,
+	&am33xx_l4_ls__uart4,
+	&am33xx_l4_ls__uart5,
+	&am33xx_l4_ls__uart6,
+	&am33xx_l4_ls__elm,
+	&am33xx_l4_ls__epwmss0,
+	&am33xx_epwmss0__ecap0,
+	&am33xx_epwmss0__eqep0,
+	&am33xx_epwmss0__ehrpwm0,
+	&am33xx_l4_ls__epwmss1,
+	&am33xx_epwmss1__ecap1,
+	&am33xx_epwmss1__eqep1,
+	&am33xx_epwmss1__ehrpwm1,
+	&am33xx_l4_ls__epwmss2,
+	&am33xx_epwmss2__ecap2,
+	&am33xx_epwmss2__eqep2,
+	&am33xx_epwmss2__ehrpwm2,
+	&am33xx_l3_s__gpmc,
+	&am33xx_l4_ls__mcspi0,
+	&am33xx_l4_ls__mcspi1,
+	&am33xx_l3_main__tptc0,
+	&am33xx_l3_main__tptc1,
+	&am33xx_l3_main__tptc2,
+	&am33xx_l3_main__ocmc,
+	&am43xx_l4_hs__cpgmac0,
+	&am33xx_cpgmac0__mdio,
+	&am33xx_l3_main__sha0,
+	&am33xx_l3_main__aes0,
+	&am43xx_l4_ls__ocp2scp0,
+	&am43xx_l4_ls__ocp2scp1,
+	&am43xx_l3_s__usbotgss0,
+	&am43xx_l3_s__usbotgss1,
+	NULL,
+};
+
+int __init am43xx_hwmod_init(void)
+{
+	omap_hwmod_am43xx_reg();
+	omap_hwmod_init();
+	return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 9c3b504477d7..1e5b12cb8246 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -914,7 +914,7 @@ static struct omap_hwmod omap44xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -930,7 +930,7 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -2193,7 +2193,7 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap44xx_mpu_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 3c70f5c1860f..9e08d6994a0b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -32,7 +32,6 @@
 #include "cm1_54xx.h"
 #include "cm2_54xx.h"
 #include "prm54xx.h"
-#include "prm-regbits-54xx.h"
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
@@ -353,7 +352,7 @@ static struct omap_hwmod omap54xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -369,7 +368,7 @@ static struct omap_hwmod omap54xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -741,6 +740,39 @@ static struct omap_hwmod omap54xx_kbd_hwmod = {
 };
 
 /*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &omap54xx_mailbox_sysc,
+};
+
+/* mailbox */
+static struct omap_hwmod omap54xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &omap54xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
  * 'mcbsp' class
  * multi channel buffered serial port controller
  */
@@ -1103,7 +1135,7 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap54xx_mpu_hwmod_class,
 	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1114,6 +1146,77 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 };
 
 /*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the processes
+ * running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &omap54xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod omap54xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &omap54xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &omap54xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
  * This class contains several variants: ['timer_1ms', 'timer']
@@ -1433,6 +1536,123 @@ static struct omap_hwmod omap54xx_uart6_hwmod = {
 };
 
 /*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
+	.name	= "usb_host_hs",
+	.sysc	= &omap54xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap54xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3init_60m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
+	.name	= "usb_tll_hs",
+	.sysc	= &omap54xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap54xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'usb_otg_ss' class
  * 2.0 super speed (usb_otg_ss) controller
  */
@@ -1808,6 +2028,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> mailbox */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mailbox = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_mailbox_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_abe -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = {
 	.master		= &omap54xx_l4_abe_hwmod,
@@ -1920,6 +2148,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_spinlock_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -2056,6 +2300,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> usb_host_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_host_hs_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> usb_tll_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_tll_hs_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> usb_otg_ss */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -2108,6 +2368,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__i2c4,
 	&omap54xx_l4_per__i2c5,
 	&omap54xx_l4_wkup__kbd,
+	&omap54xx_l4_cfg__mailbox,
 	&omap54xx_l4_abe__mcbsp1,
 	&omap54xx_l4_abe__mcbsp2,
 	&omap54xx_l4_abe__mcbsp3,
@@ -2122,6 +2383,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__mmc4,
 	&omap54xx_l4_per__mmc5,
 	&omap54xx_l4_cfg__mpu,
+	&omap54xx_l4_cfg__spinlock,
+	&omap54xx_l4_cfg__ocp2scp1,
 	&omap54xx_l4_wkup__timer1,
 	&omap54xx_l4_per__timer2,
 	&omap54xx_l4_per__timer3,
@@ -2139,6 +2402,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__uart4,
 	&omap54xx_l4_per__uart5,
 	&omap54xx_l4_per__uart6,
+	&omap54xx_l4_cfg__usb_host_hs,
+	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
 	NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
new file mode 100644
index 000000000000..db32d5380b11
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -0,0 +1,2724 @@
+/*
+ * Hardware modules present on the DRA7xx chips
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Paul Walmsley
+ * Benoit Cousson
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
+
+#include <linux/omap-dma.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
+#include "omap_hwmod_common_data.h"
+#include "cm1_7xx.h"
+#include "cm2_7xx.h"
+#include "prm7xx.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "wd_timer.h"
+
+/* Base offset for all DRA7XX interrupts external to MPUSS */
+#define DRA7XX_IRQ_GIC_START	32
+
+/* Base offset for all DRA7XX dma requests */
+#define DRA7XX_DMA_REQ_START	1
+
+
+/*
+ * IP blocks
+ */
+
+/*
+ * 'l3' class
+ * instance(s): l3_instr, l3_main_1, l3_main_2
+ */
+static struct omap_hwmod_class dra7xx_l3_hwmod_class = {
+	.name	= "l3",
+};
+
+/* l3_instr */
+static struct omap_hwmod dra7xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3instr_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* l3_main_1 */
+static struct omap_hwmod dra7xx_l3_main_1_hwmod = {
+	.name		= "l3_main_1",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* l3_main_2 */
+static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
+	.name		= "l3_main_2",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3instr_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup
+ */
+static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
+	.name	= "l4",
+};
+
+/* l4_cfg */
+static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
+	.name		= "l4_cfg",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* l4_per1 */
+static struct omap_hwmod dra7xx_l4_per1_hwmod = {
+	.name		= "l4_per1",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_per2 */
+static struct omap_hwmod dra7xx_l4_per2_hwmod = {
+	.name		= "l4_per2",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_per3 */
+static struct omap_hwmod dra7xx_l4_per3_hwmod = {
+	.name		= "l4_per3",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per3_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_wkup */
+static struct omap_hwmod dra7xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'atl' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_atl_hwmod_class = {
+	.name	= "atl",
+};
+
+/* atl */
+static struct omap_hwmod dra7xx_atl_hwmod = {
+	.name		= "atl",
+	.class		= &dra7xx_atl_hwmod_class,
+	.clkdm_name	= "atl_clkdm",
+	.main_clk	= "atl_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'bb2d' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = {
+	.name	= "bb2d",
+};
+
+/* bb2d */
+static struct omap_hwmod dra7xx_bb2d_hwmod = {
+	.name		= "bb2d",
+	.class		= &dra7xx_bb2d_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dpll_core_h24x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'counter' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_counter_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_counter_hwmod_class = {
+	.name	= "counter",
+	.sysc	= &dra7xx_counter_sysc,
+};
+
+/* counter_32k */
+static struct omap_hwmod dra7xx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.class		= &dra7xx_counter_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ctrl_module' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = {
+	.name	= "ctrl_module",
+};
+
+/* ctrl_module_wkup */
+static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
+	.name		= "ctrl_module_wkup",
+	.class		= &dra7xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/*
+ * 'dcan' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_dcan_hwmod_class = {
+	.name	= "dcan",
+};
+
+/* dcan1 */
+static struct omap_hwmod dra7xx_dcan1_hwmod = {
+	.name		= "dcan1",
+	.class		= &dra7xx_dcan_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "dcan1_sys_clk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan2 */
+static struct omap_hwmod dra7xx_dcan2_hwmod = {
+	.name		= "dcan2",
+	.class		= &dra7xx_dcan_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "sys_clkin1",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'dma' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_dma_hwmod_class = {
+	.name	= "dma",
+	.sysc	= &dra7xx_dma_sysc,
+};
+
+/* dma dev_attr */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+	.lch_count	= 32,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info dra7xx_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 + DRA7XX_IRQ_GIC_START },
+	{ .name = "1", .irq = 13 + DRA7XX_IRQ_GIC_START },
+	{ .name = "2", .irq = 14 + DRA7XX_IRQ_GIC_START },
+	{ .name = "3", .irq = 15 + DRA7XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod dra7xx_dma_system_hwmod = {
+	.name		= "dma_system",
+	.class		= &dra7xx_dma_hwmod_class,
+	.clkdm_name	= "dma_clkdm",
+	.mpu_irqs	= dra7xx_dma_system_irqs,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
+		},
+	},
+	.dev_attr	= &dma_dev_attr,
+};
+
+/*
+ * 'dss' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dss_sysc = {
+	.rev_offs	= 0x0000,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class dra7xx_dss_hwmod_class = {
+	.name	= "dss",
+	.sysc	= &dra7xx_dss_sysc,
+	.reset	= omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_dma_info dra7xx_dss_sdma_reqs[] = {
+	{ .dma_req = 75 + DRA7XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	{ .role = "dss_clk", .clk = "dss_dss_clk" },
+	{ .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "32khz_clk", .clk = "dss_32khz_clk" },
+	{ .role = "video2_clk", .clk = "dss_video2_clk" },
+	{ .role = "video1_clk", .clk = "dss_video1_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_hdmi_clk" },
+};
+
+static struct omap_hwmod dra7xx_dss_hwmod = {
+	.name		= "dss_core",
+	.class		= &dra7xx_dss_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.sdma_reqs	= dra7xx_dss_sdma_reqs,
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= dss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &dra7xx_dispc_sysc,
+};
+
+/* dss_dispc */
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+	.has_framedonetv_irq	= 1,
+	.manager_count		= 4,
+};
+
+static struct omap_hwmod dra7xx_dss_dispc_hwmod = {
+	.name		= "dss_dispc",
+	.class		= &dra7xx_dispc_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.dev_attr	= &dss_dispc_dev_attr,
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_hdmi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_hdmi_hwmod_class = {
+	.name	= "hdmi",
+	.sysc	= &dra7xx_hdmi_sysc,
+};
+
+/* dss_hdmi */
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_hdmi_clk" },
+};
+
+static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
+	.name		= "dss_hdmi",
+	.class		= &dra7xx_hdmi_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_48mhz_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_hdmi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'elm' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_elm_hwmod_class = {
+	.name	= "elm",
+	.sysc	= &dra7xx_elm_sysc,
+};
+
+/* elm */
+
+static struct omap_hwmod dra7xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &dra7xx_elm_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'gpio' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_gpio_hwmod_class = {
+	.name	= "gpio",
+	.sysc	= &dra7xx_gpio_sysc,
+	.rev	= 2,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio4 */
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio5 */
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio6 */
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio7 */
+static struct omap_hwmod_opt_clk gpio7_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio7_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio7_hwmod = {
+	.name		= "gpio7",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio7_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio7_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio8 */
+static struct omap_hwmod_opt_clk gpio8_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio8_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio8_hwmod = {
+	.name		= "gpio8",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio8_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio8_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/*
+ * 'gpmc' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &dra7xx_gpmc_sysc,
+};
+
+/* gpmc */
+
+static struct omap_hwmod dra7xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &dra7xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'hdq1w' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_hdq1w_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0014,
+	.syss_offs	= 0x0018,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_hdq1w_hwmod_class = {
+	.name	= "hdq1w",
+	.sysc	= &dra7xx_hdq1w_sysc,
+};
+
+/* hdq1w */
+
+static struct omap_hwmod dra7xx_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.class		= &dra7xx_hdq1w_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_INIT_NO_RESET,
+	.main_clk	= "func_12m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'i2c' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.clockact	= CLOCKACT_TEST_ICLK,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_i2c_hwmod_class = {
+	.name	= "i2c",
+	.sysc	= &dra7xx_i2c_sysc,
+	.reset	= &omap_i2c_reset,
+	.rev	= OMAP_I2C_IP_VERSION_2,
+};
+
+/* i2c dev_attr */
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
+/* i2c1 */
+static struct omap_hwmod dra7xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c2 */
+static struct omap_hwmod dra7xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+static struct omap_hwmod dra7xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c4 */
+static struct omap_hwmod dra7xx_i2c4_hwmod = {
+	.name		= "i2c4",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c5 */
+static struct omap_hwmod dra7xx_i2c5_hwmod = {
+	.name		= "i2c5",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/*
+ * 'mcspi' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
+	.name	= "mcspi",
+	.sysc	= &dra7xx_mcspi_sysc,
+	.rev	= OMAP4_MCSPI_REV,
+};
+
+/* mcspi1 */
+/* mcspi1 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
+	.num_chipselect	= 4,
+};
+
+static struct omap_hwmod dra7xx_mcspi1_hwmod = {
+	.name		= "mcspi1",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi1_dev_attr,
+};
+
+/* mcspi2 */
+/* mcspi2 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
+	.num_chipselect	= 2,
+};
+
+static struct omap_hwmod dra7xx_mcspi2_hwmod = {
+	.name		= "mcspi2",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi2_dev_attr,
+};
+
+/* mcspi3 */
+/* mcspi3 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
+	.num_chipselect	= 2,
+};
+
+static struct omap_hwmod dra7xx_mcspi3_hwmod = {
+	.name		= "mcspi3",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi3_dev_attr,
+};
+
+/* mcspi4 */
+/* mcspi4 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
+	.num_chipselect	= 1,
+};
+
+static struct omap_hwmod dra7xx_mcspi4_hwmod = {
+	.name		= "mcspi4",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi4_dev_attr,
+};
+
+/*
+ * 'mmc' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mmc_hwmod_class = {
+	.name	= "mmc",
+	.sysc	= &dra7xx_mmc_sysc,
+};
+
+/* mmc1 */
+static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc1_clk32k" },
+};
+
+/* mmc1 dev_attr */
+static struct omap_mmc_dev_attr mmc1_dev_attr = {
+	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod dra7xx_mmc1_hwmod = {
+	.name		= "mmc1",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "mmc1_fclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc1_opt_clks),
+	.dev_attr	= &mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_hwmod_opt_clk mmc2_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc2_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc2_hwmod = {
+	.name		= "mmc2",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "mmc2_fclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc2_opt_clks),
+};
+
+/* mmc3 */
+static struct omap_hwmod_opt_clk mmc3_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc3_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc3_hwmod = {
+	.name		= "mmc3",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "mmc3_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc3_opt_clks),
+};
+
+/* mmc4 */
+static struct omap_hwmod_opt_clk mmc4_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc4_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc4_hwmod = {
+	.name		= "mmc4",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "mmc4_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc4_opt_clks),
+};
+
+/*
+ * 'mpu' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod dra7xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &dra7xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &dra7xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod dra7xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &dra7xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'qspi' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = {
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_qspi_hwmod_class = {
+	.name	= "qspi",
+	.sysc	= &dra7xx_qspi_sysc,
+};
+
+/* qspi */
+static struct omap_hwmod dra7xx_qspi_hwmod = {
+	.name		= "qspi",
+	.class		= &dra7xx_qspi_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "qspi_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'sata' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = {
+	.sysc_offs	= 0x0000,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
+	.name	= "sata",
+	.sysc	= &dra7xx_sata_sysc,
+};
+
+/* sata */
+static struct omap_hwmod_opt_clk sata_opt_clks[] = {
+	{ .role = "ref_clk", .clk = "sata_ref_clk" },
+};
+
+static struct omap_hwmod dra7xx_sata_hwmod = {
+	.name		= "sata",
+	.class		= &dra7xx_sata_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= sata_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(sata_opt_clks),
+};
+
+/*
+ * 'smartreflex' class
+ *
+ */
+
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = {
+	.sysc_offs	= 0x0038,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type_smartreflex,
+};
+
+static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = {
+	.name	= "smartreflex",
+	.sysc	= &dra7xx_smartreflex_sysc,
+	.rev	= 2,
+};
+
+/* smartreflex_core */
+/* smartreflex_core dev_attr */
+static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
+	.sensor_voltdm_name	= "core",
+};
+
+static struct omap_hwmod dra7xx_smartreflex_core_hwmod = {
+	.name		= "smartreflex_core",
+	.class		= &dra7xx_smartreflex_hwmod_class,
+	.clkdm_name	= "coreaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &smartreflex_core_dev_attr,
+};
+
+/* smartreflex_mpu */
+/* smartreflex_mpu dev_attr */
+static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
+	.sensor_voltdm_name	= "mpu",
+};
+
+static struct omap_hwmod dra7xx_smartreflex_mpu_hwmod = {
+	.name		= "smartreflex_mpu",
+	.class		= &dra7xx_smartreflex_hwmod_class,
+	.clkdm_name	= "coreaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &smartreflex_mpu_dev_attr,
+};
+
+/*
+ * 'spinlock' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &dra7xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod dra7xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &dra7xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'timer' class
+ *
+ * This class contains several variants: ['timer_1ms', 'timer_secure',
+ * 'timer']
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_1ms_sysc,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_secure_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_secure_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_secure_sysc,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_sysc,
+};
+
+/* timer1 */
+static struct omap_hwmod dra7xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "timer1_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer2 */
+static struct omap_hwmod dra7xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer2_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer3 */
+static struct omap_hwmod dra7xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer3_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer4 */
+static struct omap_hwmod dra7xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &dra7xx_timer_secure_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer4_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer5 */
+static struct omap_hwmod dra7xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer5_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer6 */
+static struct omap_hwmod dra7xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer6_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer7 */
+static struct omap_hwmod dra7xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer7_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer8 */
+static struct omap_hwmod dra7xx_timer8_hwmod = {
+	.name		= "timer8",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer8_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer9 */
+static struct omap_hwmod dra7xx_timer9_hwmod = {
+	.name		= "timer9",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer9_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer10 */
+static struct omap_hwmod dra7xx_timer10_hwmod = {
+	.name		= "timer10",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer10_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer11 */
+static struct omap_hwmod dra7xx_timer11_hwmod = {
+	.name		= "timer11",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer11_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'uart' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_uart_hwmod_class = {
+	.name	= "uart",
+	.sysc	= &dra7xx_uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod dra7xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart1_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart2 */
+static struct omap_hwmod dra7xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart2_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+static struct omap_hwmod dra7xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart3_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart4 */
+static struct omap_hwmod dra7xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart4_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart5 */
+static struct omap_hwmod dra7xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart5_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart6 */
+static struct omap_hwmod dra7xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "uart6_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_otg_ss' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
+	.name	= "usb_otg_ss",
+};
+
+/* usb_otg_ss1 */
+static struct omap_hwmod_opt_clk usb_otg_ss1_opt_clks[] = {
+	{ .role = "refclk960m", .clk = "usb_otg_ss1_refclk960m" },
+};
+
+static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
+	.name		= "usb_otg_ss1",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= usb_otg_ss1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss1_opt_clks),
+};
+
+/* usb_otg_ss2 */
+static struct omap_hwmod_opt_clk usb_otg_ss2_opt_clks[] = {
+	{ .role = "refclk960m", .clk = "usb_otg_ss2_refclk960m" },
+};
+
+static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
+	.name		= "usb_otg_ss2",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= usb_otg_ss2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss2_opt_clks),
+};
+
+/* usb_otg_ss3 */
+static struct omap_hwmod dra7xx_usb_otg_ss3_hwmod = {
+	.name		= "usb_otg_ss3",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* usb_otg_ss4 */
+static struct omap_hwmod dra7xx_usb_otg_ss4_hwmod = {
+	.name		= "usb_otg_ss4",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'vcp' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_vcp_hwmod_class = {
+	.name	= "vcp",
+};
+
+/* vcp1 */
+static struct omap_hwmod dra7xx_vcp1_hwmod = {
+	.name		= "vcp1",
+	.class		= &dra7xx_vcp_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* vcp2 */
+static struct omap_hwmod dra7xx_vcp2_hwmod = {
+	.name		= "vcp2",
+	.class		= &dra7xx_vcp_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'wd_timer' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &dra7xx_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod dra7xx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &dra7xx_wd_timer_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "sys_32k_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+
+/*
+ * Interfaces
+ */
+
+/* l3_main_2 -> l3_instr */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
+	.master		= &dra7xx_l3_main_2_hwmod,
+	.slave		= &dra7xx_l3_instr_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_l3_main_1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = {
+	.master		= &dra7xx_mpu_hwmod,
+	.slave		= &dra7xx_l3_main_1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l3_main_2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_l3_main_2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_cfg_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_wkup */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_wkup_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> atl */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_atl_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> bb2d */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_bb2d_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> counter_32k */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__counter_32k = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_counter_32k_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> ctrl_module_wkup */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_ctrl_module_wkup_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> dcan1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_dcan1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> dcan2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__dcan2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_dcan2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x4a056000,
+		.pa_end		= 0x4a056fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_dma_system_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dma_system_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
+	{
+		.name		= "family",
+		.pa_start	= 0x58000000,
+		.pa_end		= 0x5800007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l3_main_1 -> dss */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = {
+	{
+		.name		= "dispc",
+		.pa_start	= 0x58001000,
+		.pa_end		= 0x58001fff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l3_main_1 -> dispc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_dispc_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_dispc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = {
+	{
+		.name		= "hdmi_wp",
+		.pa_start	= 0x58040000,
+		.pa_end		= 0x580400ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> dispc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_hdmi_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_hdmi_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
+	{
+		.pa_start	= 0x48078000,
+		.pa_end		= 0x48078fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per1 -> elm */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_elm_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_elm_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__gpio1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_gpio1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio6 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio7 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio7_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio8_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x500003ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> gpmc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_gpmc_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_hdq1w_addrs[] = {
+	{
+		.pa_start	= 0x480b2000,
+		.pa_end		= 0x480b201f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per1 -> hdq1w */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_hdq1w_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_hdq1w_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> mpu */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_mpu_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
+	{
+		.pa_start	= 0x4a080000,
+		.pa_end		= 0x4a08001f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_ocp2scp1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
+	{
+		.pa_start	= 0x4b300000,
+		.pa_end		= 0x4b30007f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> qspi */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_qspi_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_qspi_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = {
+	{
+		.name		= "sysc",
+		.pa_start	= 0x4a141100,
+		.pa_end		= 0x4a141107,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> sata */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_sata_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_sata_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_smartreflex_core_addrs[] = {
+	{
+		.pa_start	= 0x4a0dd000,
+		.pa_end		= 0x4a0dd07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_core = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_smartreflex_core_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_smartreflex_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_smartreflex_mpu_addrs[] = {
+	{
+		.pa_start	= 0x4a0d9000,
+		.pa_end		= 0x4a0d907f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_smartreflex_mpu_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_smartreflex_mpu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
+	{
+		.pa_start	= 0x4a0f6000,
+		.pa_end		= 0x4a0f6fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_spinlock_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_spinlock_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_timer1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer5 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer6 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer7 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer7_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer8 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer8_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer9 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer9_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer10 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer10_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer11 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer11_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss1_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss2 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss2_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss3 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss3_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss4 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss4_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> vcp1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_vcp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> vcp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_vcp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> vcp2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_vcp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> vcp2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_vcp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_wd_timer2_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l3_main_2__l3_instr,
+	&dra7xx_l4_cfg__l3_main_1,
+	&dra7xx_mpu__l3_main_1,
+	&dra7xx_l3_main_1__l3_main_2,
+	&dra7xx_l4_cfg__l3_main_2,
+	&dra7xx_l3_main_1__l4_cfg,
+	&dra7xx_l3_main_1__l4_per1,
+	&dra7xx_l3_main_1__l4_per2,
+	&dra7xx_l3_main_1__l4_per3,
+	&dra7xx_l3_main_1__l4_wkup,
+	&dra7xx_l4_per2__atl,
+	&dra7xx_l3_main_1__bb2d,
+	&dra7xx_l4_wkup__counter_32k,
+	&dra7xx_l4_wkup__ctrl_module_wkup,
+	&dra7xx_l4_wkup__dcan1,
+	&dra7xx_l4_per2__dcan2,
+	&dra7xx_l4_cfg__dma_system,
+	&dra7xx_l3_main_1__dss,
+	&dra7xx_l3_main_1__dispc,
+	&dra7xx_l3_main_1__hdmi,
+	&dra7xx_l4_per1__elm,
+	&dra7xx_l4_wkup__gpio1,
+	&dra7xx_l4_per1__gpio2,
+	&dra7xx_l4_per1__gpio3,
+	&dra7xx_l4_per1__gpio4,
+	&dra7xx_l4_per1__gpio5,
+	&dra7xx_l4_per1__gpio6,
+	&dra7xx_l4_per1__gpio7,
+	&dra7xx_l4_per1__gpio8,
+	&dra7xx_l3_main_1__gpmc,
+	&dra7xx_l4_per1__hdq1w,
+	&dra7xx_l4_per1__i2c1,
+	&dra7xx_l4_per1__i2c2,
+	&dra7xx_l4_per1__i2c3,
+	&dra7xx_l4_per1__i2c4,
+	&dra7xx_l4_per1__i2c5,
+	&dra7xx_l4_per1__mcspi1,
+	&dra7xx_l4_per1__mcspi2,
+	&dra7xx_l4_per1__mcspi3,
+	&dra7xx_l4_per1__mcspi4,
+	&dra7xx_l4_per1__mmc1,
+	&dra7xx_l4_per1__mmc2,
+	&dra7xx_l4_per1__mmc3,
+	&dra7xx_l4_per1__mmc4,
+	&dra7xx_l4_cfg__mpu,
+	&dra7xx_l4_cfg__ocp2scp1,
+	&dra7xx_l3_main_1__qspi,
+	&dra7xx_l4_cfg__sata,
+	&dra7xx_l4_cfg__smartreflex_core,
+	&dra7xx_l4_cfg__smartreflex_mpu,
+	&dra7xx_l4_cfg__spinlock,
+	&dra7xx_l4_wkup__timer1,
+	&dra7xx_l4_per1__timer2,
+	&dra7xx_l4_per1__timer3,
+	&dra7xx_l4_per1__timer4,
+	&dra7xx_l4_per3__timer5,
+	&dra7xx_l4_per3__timer6,
+	&dra7xx_l4_per3__timer7,
+	&dra7xx_l4_per3__timer8,
+	&dra7xx_l4_per1__timer9,
+	&dra7xx_l4_per1__timer10,
+	&dra7xx_l4_per1__timer11,
+	&dra7xx_l4_per1__uart1,
+	&dra7xx_l4_per1__uart2,
+	&dra7xx_l4_per1__uart3,
+	&dra7xx_l4_per1__uart4,
+	&dra7xx_l4_per1__uart5,
+	&dra7xx_l4_per1__uart6,
+	&dra7xx_l4_per3__usb_otg_ss1,
+	&dra7xx_l4_per3__usb_otg_ss2,
+	&dra7xx_l4_per3__usb_otg_ss3,
+	&dra7xx_l4_per3__usb_otg_ss4,
+	&dra7xx_l3_main_1__vcp1,
+	&dra7xx_l4_per2__vcp1,
+	&dra7xx_l3_main_1__vcp2,
+	&dra7xx_l4_per2__vcp2,
+	&dra7xx_l4_wkup__wd_timer2,
+	NULL,
+};
+
+int __init dra7xx_hwmod_init(void)
+{
+	omap_hwmod_init();
+	return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index bd41d59a7cab..a358a07e18f2 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -17,7 +17,8 @@
  * GNU General Public License for more details.
  */
 #include <linux/module.h>
-#include <linux/opp.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include "omap_device.h"
@@ -40,6 +41,9 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 {
 	int i, r;
 
+	if (of_have_populated_dt())
+		return -EINVAL;
+
 	if (!opp_def || !opp_def_size) {
 		pr_err("%s: invalid params!\n", __func__);
 		return -EINVAL;
@@ -81,14 +85,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 			dev = &oh->od->pdev->dev;
 		}
 
-		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+		r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt);
 		if (r) {
 			dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
 				__func__, opp_def->freq,
 				opp_def->hwmod_name, i, r);
 		} else {
 			if (!opp_def->default_available)
-				r = opp_disable(dev, opp_def->freq);
+				r = dev_pm_opp_disable(dev, opp_def->freq);
 			if (r)
 				dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
 					__func__, opp_def->freq,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
new file mode 100644
index 000000000000..10c71450cf63
--- /dev/null
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -0,0 +1,174 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/wl12xx.h>
+
+#include <linux/platform_data/pinctrl-single.h>
+
+#include "common.h"
+#include "common-board-devices.h"
+#include "dss-common.h"
+#include "control.h"
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init __used legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret)
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+		       __func__, clkname, ret);
+}
+
+#if IS_ENABLED(CONFIG_WL12XX)
+
+static struct wl12xx_platform_data wl12xx __initdata;
+
+static void __init __used legacy_init_wl12xx(unsigned ref_clock,
+					     unsigned tcxo_clock,
+					     int gpio)
+{
+	int res;
+
+	wl12xx.board_ref_clock = ref_clock;
+	wl12xx.board_tcxo_clock = tcxo_clock;
+	wl12xx.irq = gpio_to_irq(gpio);
+
+	res = wl12xx_set_platform_data(&wl12xx);
+	if (res) {
+		pr_err("error setting wl12xx data: %d\n", res);
+		return;
+	}
+}
+#else
+static inline void legacy_init_wl12xx(unsigned ref_clock,
+				      unsigned tcxo_clock,
+				      int gpio)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init hsmmc2_internal_input_clk(void)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+	omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
+}
+
+static void __init omap3_igep0020_legacy_init(void)
+{
+	omap3_igep2_display_init_of();
+}
+
+static void __init omap3_evm_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
+}
+
+static void __init omap3_zoom_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#ifdef CONFIG_ARCH_OMAP4
+static void __init omap4_sdp_legacy_init(void)
+{
+	omap_4430sdp_display_init_of();
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
+			   WL12XX_TCXOCLOCK_26, 53);
+}
+
+static void __init omap4_panda_legacy_init(void)
+{
+	omap4_panda_display_init_of();
+	legacy_init_ehci_clk("auxclk3_ck");
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static void __init omap5_uevm_legacy_init(void)
+{
+	legacy_init_ehci_clk("auxclk1_ck");
+}
+#endif
+
+static struct pcs_pdata pcs_pdata;
+
+void omap_pcs_legacy_init(int irq, void (*rearm)(void))
+{
+	pcs_pdata.irq = irq;
+	pcs_pdata.rearm = rearm;
+}
+
+struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
+#endif
+	{ /* sentinel */ },
+};
+
+static struct pdata_init pdata_quirks[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
+	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
+	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
+	{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
+	{ "ti,omap4-panda", omap4_panda_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
+#endif
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
+{
+	struct pdata_init *quirks = pdata_quirks;
+
+	omap_sdrc_init(NULL, NULL);
+	of_platform_populate(NULL, omap_dt_match_table,
+			     omap_auxdata_lookup, NULL);
+
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e742118fcfd2..e1b41416fbf1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/cpu.h>
@@ -131,7 +131,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 {
 	struct voltagedomain *voltdm;
 	struct clk *clk;
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	unsigned long freq, bootup_volt;
 	struct device *dev;
 
@@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	clk_put(clk);
 
 	rcu_read_lock();
-	opp = opp_find_freq_ceil(dev, &freq);
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
@@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 		goto exit;
 	}
 
-	bootup_volt = opp_get_voltage(opp);
+	bootup_volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
@@ -266,7 +266,12 @@ static void __init omap4_init_voltages(void)
 
 static inline void omap_init_cpufreq(void)
 {
-	struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+	struct platform_device_info devinfo = { };
+
+	if (!of_have_populated_dt())
+		devinfo.name = "omap-cpufreq";
+	else
+		devinfo.name = "cpufreq-cpu0";
 	platform_device_register_full(&devinfo);
 }
 
@@ -300,10 +305,11 @@ int __init omap2_common_pm_late_init(void)
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
 
-		/* cpufreq dummy device instantiation */
-		omap_init_cpufreq();
 	}
 
+	/* cpufreq dummy device instantiation */
+	omap_init_cpufreq();
+
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index ce956b0a7ba4..8c0759496c8d 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -62,16 +62,6 @@ static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
 
 static struct clk *osc_ck, *emul_ck;
 
-static int omap2_fclks_active(void)
-{
-	u32 f1, f2;
-
-	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-
-	return (f1 | f2) ? 1 : 0;
-}
-
 static int omap2_enter_full_retention(void)
 {
 	u32 l;
@@ -142,17 +132,7 @@ static int sti_console_enabled;
 
 static int omap2_allow_mpu_retention(void)
 {
-	u32 l;
-
-	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
-		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
-		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
-		return 0;
-	/* Check for UART3. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3_MASK)
+	if (!omap2xxx_cm_mpu_retention_allowed())
 		return 0;
 	if (sti_console_enabled)
 		return 0;
@@ -188,7 +168,7 @@ static void omap2_enter_mpu_retention(void)
 
 static int omap2_can_sleep(void)
 {
-	if (omap2_fclks_active())
+	if (omap2xxx_cm_fclks_active())
 		return 0;
 	if (__clk_is_enabled(osc_ck))
 		return 0;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5a2d8034c8de..93b80e5da8d4 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -430,8 +430,7 @@ static void __init omap3_iva_idle(void)
 			 OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Set IVA2 boot mode to 'idle' */
-	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
-			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap3_ctrl_set_iva_bootmode_idle();
 
 	/* Un-reset IVA2 */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index e4d7bd6f94b8..da5a59ae77b6 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -256,6 +256,8 @@ extern void omap3xxx_powerdomains_init(void);
 extern void am33xx_powerdomains_init(void);
 extern void omap44xx_powerdomains_init(void);
 extern void omap54xx_powerdomains_init(void);
+extern void dra7xx_powerdomains_init(void);
+void am43xx_powerdomains_init(void);
 
 extern struct pwrdm_ops omap2_pwrdm_operations;
 extern struct pwrdm_ops omap3_pwrdm_operations;
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index e2d4bd804523..328c1037cb60 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -336,6 +336,13 @@ static struct powerdomain dpll5_pwrdm = {
 	.voltdm		  = { .name = "core" },
 };
 
+static struct powerdomain alwon_81xx_pwrdm = {
+	.name		  = "alwon_pwrdm",
+	.prcm_offs	  = TI81XX_PRM_ALWON_MOD,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.voltdm		  = { .name = "core" },
+};
+
 static struct powerdomain device_81xx_pwrdm = {
 	.name		  = "device_pwrdm",
 	.prcm_offs	  = TI81XX_PRM_DEVICE_MOD,
@@ -442,6 +449,7 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
 };
 
 static struct powerdomain *powerdomains_ti81xx[] __initdata = {
+	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
 	&active_816x_pwrdm,
 	&default_816x_pwrdm,
diff --git a/arch/arm/mach-omap2/powerdomains43xx_data.c b/arch/arm/mach-omap2/powerdomains43xx_data.c
new file mode 100644
index 000000000000..95fee54c38ab
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains43xx_data.c
@@ -0,0 +1,136 @@
+/*
+ * AM43xx Power domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+
+#include "prcm-common.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct powerdomain gfx_43xx_pwrdm = {
+	.name		  = "gfx_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_GFX_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* gfx_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain mpu_43xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.voltdm		  = { .name = "mpu" },
+	.prcm_offs	  = AM43XX_PRM_MPU_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l1 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[2] = PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* mpu_l1 */
+		[1] = PWRSTS_ON,	/* mpu_l2 */
+		[2] = PWRSTS_ON,	/* mpu_ram */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain rtc_43xx_pwrdm = {
+	.name		  = "rtc_pwrdm",
+	.voltdm		  = { .name = "rtc" },
+	.prcm_offs	  = AM43XX_PRM_RTC_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain wkup_43xx_pwrdm = {
+	.name		  = "wkup_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_WKUP_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* debugss_mem */
+	},
+};
+
+static struct powerdomain tamper_43xx_pwrdm = {
+	.name		  = "tamper_pwrdm",
+	.voltdm		  = { .name = "tamper" },
+	.prcm_offs	  = AM43XX_PRM_TAMPER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain cefuse_43xx_pwrdm = {
+	.name		  = "cefuse_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_CEFUSE_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain per_43xx_pwrdm = {
+	.name		  = "per_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_PER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* icss_mem */
+		[1] = PWRSTS_OFF_RET,	/* per_mem */
+		[2] = PWRSTS_OFF_RET,	/* ram1_mem */
+		[3] = PWRSTS_OFF_RET,	/* ram2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* icss_mem */
+		[1] = PWRSTS_ON,	/* per_mem */
+		[2] = PWRSTS_ON,	/* ram1_mem */
+		[3] = PWRSTS_ON,	/* ram2_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain *powerdomains_am43xx[] __initdata = {
+	&gfx_43xx_pwrdm,
+	&mpu_43xx_pwrdm,
+	&rtc_43xx_pwrdm,
+	&wkup_43xx_pwrdm,
+	&tamper_43xx_pwrdm,
+	&cefuse_43xx_pwrdm,
+	&per_43xx_pwrdm,
+	NULL
+};
+
+static int am43xx_check_vcvp(void)
+{
+	return 0;
+}
+
+void __init am43xx_powerdomains_init(void)
+{
+	omap4_pwrdm_operations.pwrdm_has_voltdm = am43xx_check_vcvp;
+	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_am43xx);
+	pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c
index 81f8a7cc26ee..ce1d752af991 100644
--- a/arch/arm/mach-omap2/powerdomains54xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -25,7 +25,6 @@
 
 #include "prcm-common.h"
 #include "prcm44xx.h"
-#include "prm-regbits-54xx.h"
 #include "prm54xx.h"
 #include "prcm_mpu54xx.h"
 
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
new file mode 100644
index 000000000000..48151d1cfde0
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -0,0 +1,454 @@
+/*
+ * DRA7xx Power domains framework
+ *
+ * Copyright (C) 2009-2013 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Nokia Corporation
+ *
+ * Generated by code originally written by:
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+
+#include "prcm-common.h"
+#include "prcm44xx.h"
+#include "prm7xx.h"
+#include "prcm_mpu7xx.h"
+
+/* iva_7xx_pwrdm: IVA-HD power domain */
+static struct powerdomain iva_7xx_pwrdm = {
+	.name		  = "iva_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_IVA_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
+		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
+		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
+		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
+		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
+		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
+		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* rtc_7xx_pwrdm:  */
+static struct powerdomain rtc_7xx_pwrdm = {
+	.name		  = "rtc_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_RTC_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+/* custefuse_7xx_pwrdm: Customer efuse controller power domain */
+static struct powerdomain custefuse_7xx_pwrdm = {
+	.name		  = "custefuse_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CUSTEFUSE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* ipu_7xx_pwrdm: Audio back end power domain */
+static struct powerdomain ipu_7xx_pwrdm = {
+	.name		  = "ipu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_IPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* aessmem */
+		[1] = PWRSTS_OFF_RET,	/* periphmem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* aessmem */
+		[1] = PWRSTS_OFF_RET,	/* periphmem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* dss_7xx_pwrdm: Display subsystem power domain */
+static struct powerdomain dss_7xx_pwrdm = {
+	.name		  = "dss_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSS_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* l4per_7xx_pwrdm: Target peripherals power domain */
+static struct powerdomain l4per_7xx_pwrdm = {
+	.name		  = "l4per_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_L4PER_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
+		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
+		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* gpu_7xx_pwrdm: 3D accelerator power domain */
+static struct powerdomain gpu_7xx_pwrdm = {
+	.name		  = "gpu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_GPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* wkupaon_7xx_pwrdm: Wake-up power domain */
+static struct powerdomain wkupaon_7xx_pwrdm = {
+	.name		  = "wkupaon_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_WKUPAON_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* wkup_bank */
+	},
+};
+
+/* core_7xx_pwrdm: CORE power domain */
+static struct powerdomain core_7xx_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CORE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 5,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
+		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
+		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
+		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
+		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* coreaon_7xx_pwrdm: Always ON logic that sits in VDD_CORE voltage domain */
+static struct powerdomain coreaon_7xx_pwrdm = {
+	.name		  = "coreaon_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_COREAON_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+/* cpu0_7xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
+static struct powerdomain cpu0_7xx_pwrdm = {
+	.name		  = "cpu0_pwrdm",
+	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C0_INST,
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* cpu0_l1 */
+	},
+};
+
+/* cpu1_7xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
+static struct powerdomain cpu1_7xx_pwrdm = {
+	.name		  = "cpu1_pwrdm",
+	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C1_INST,
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* cpu1_l1 */
+	},
+};
+
+/* vpe_7xx_pwrdm:  */
+static struct powerdomain vpe_7xx_pwrdm = {
+	.name		  = "vpe_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_VPE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* mpu_7xx_pwrdm: Modena processor and the Neon coprocessor power domain */
+static struct powerdomain mpu_7xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_MPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[1] = PWRSTS_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+};
+
+/* l3init_7xx_pwrdm: L3 initators pheripherals power domain  */
+static struct powerdomain l3init_7xx_pwrdm = {
+	.name		  = "l3init_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
+		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
+		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
+		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
+		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve3_7xx_pwrdm:  */
+static struct powerdomain eve3_7xx_pwrdm = {
+	.name		  = "eve3_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE3_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* emu_7xx_pwrdm: Emulation power domain */
+static struct powerdomain emu_7xx_pwrdm = {
+	.name		  = "emu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EMU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+	},
+};
+
+/* dsp2_7xx_pwrdm:  */
+static struct powerdomain dsp2_7xx_pwrdm = {
+	.name		  = "dsp2_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSP2_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* dsp1_7xx_pwrdm: Tesla processor power domain */
+static struct powerdomain dsp1_7xx_pwrdm = {
+	.name		  = "dsp1_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSP1_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* cam_7xx_pwrdm: Camera subsystem power domain */
+static struct powerdomain cam_7xx_pwrdm = {
+	.name		  = "cam_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CAM_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve4_7xx_pwrdm:  */
+static struct powerdomain eve4_7xx_pwrdm = {
+	.name		  = "eve4_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE4_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve2_7xx_pwrdm:  */
+static struct powerdomain eve2_7xx_pwrdm = {
+	.name		  = "eve2_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE2_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve1_7xx_pwrdm:  */
+static struct powerdomain eve1_7xx_pwrdm = {
+	.name		  = "eve1_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE1_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/*
+ * The following power domains are not under SW control
+ *
+ * mpuaon
+ * mmaon
+ */
+
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_dra7xx[] __initdata = {
+	&iva_7xx_pwrdm,
+	&rtc_7xx_pwrdm,
+	&custefuse_7xx_pwrdm,
+	&ipu_7xx_pwrdm,
+	&dss_7xx_pwrdm,
+	&l4per_7xx_pwrdm,
+	&gpu_7xx_pwrdm,
+	&wkupaon_7xx_pwrdm,
+	&core_7xx_pwrdm,
+	&coreaon_7xx_pwrdm,
+	&cpu0_7xx_pwrdm,
+	&cpu1_7xx_pwrdm,
+	&vpe_7xx_pwrdm,
+	&mpu_7xx_pwrdm,
+	&l3init_7xx_pwrdm,
+	&eve3_7xx_pwrdm,
+	&emu_7xx_pwrdm,
+	&dsp2_7xx_pwrdm,
+	&dsp1_7xx_pwrdm,
+	&cam_7xx_pwrdm,
+	&eve4_7xx_pwrdm,
+	&eve2_7xx_pwrdm,
+	&eve1_7xx_pwrdm,
+	NULL
+};
+
+void __init dra7xx_powerdomains_init(void)
+{
+	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_dra7xx);
+	pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index ff1ac4a82a04..0e841fd9498a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -58,6 +58,7 @@
 #define TI816X_PRM_IVAHD1_MOD			0x0d00
 #define TI816X_PRM_IVAHD2_MOD			0x0e00
 #define TI816X_PRM_SGX_MOD				0x0f00
+#define TI81XX_PRM_ALWON_MOD			0x1800
 
 /* 24XX register bits shared between CM & PRM registers */
 
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
new file mode 100644
index 000000000000..7785be984edd
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -0,0 +1,146 @@
+/*
+ * AM43x PRCM defines
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+
+#define AM43XX_PRM_PARTITION				1
+#define AM43XX_CM_PARTITION				1
+
+/* PRM instances */
+#define AM43XX_PRM_OCP_SOCKET_INST			0x0000
+#define AM43XX_PRM_MPU_INST				0x0300
+#define AM43XX_PRM_GFX_INST				0x0400
+#define AM43XX_PRM_RTC_INST				0x0500
+#define AM43XX_PRM_TAMPER_INST				0x0600
+#define AM43XX_PRM_CEFUSE_INST				0x0700
+#define AM43XX_PRM_PER_INST				0x0800
+#define AM43XX_PRM_WKUP_INST				0x2000
+#define AM43XX_PRM_DEVICE_INST				0x4000
+
+/* RM RSTCTRL offsets */
+#define AM43XX_RM_PER_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_GFX_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_WKUP_RSTCTRL_OFFSET			0x0010
+
+/* RM RSTST offsets */
+#define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
+
+/* CM instances */
+#define AM43XX_CM_WKUP_INST				0x2800
+#define AM43XX_CM_DEVICE_INST				0x4100
+#define AM43XX_CM_DPLL_INST				0x4200
+#define AM43XX_CM_MPU_INST				0x8300
+#define AM43XX_CM_GFX_INST				0x8400
+#define AM43XX_CM_RTC_INST				0x8500
+#define AM43XX_CM_TAMPER_INST				0x8600
+#define AM43XX_CM_CEFUSE_INST				0x8700
+#define AM43XX_CM_PER_INST				0x8800
+
+/* CD offsets */
+#define AM43XX_CM_WKUP_L3_AON_CDOFFS			0x0000
+#define AM43XX_CM_WKUP_L3S_TSC_CDOFFS			0x0100
+#define AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS		0x0200
+#define AM43XX_CM_WKUP_WKUP_CDOFFS			0x0300
+#define AM43XX_CM_MPU_MPU_CDOFFS			0x0000
+#define AM43XX_CM_GFX_GFX_L3_CDOFFS			0x0000
+#define AM43XX_CM_RTC_RTC_CDOFFS			0x0000
+#define AM43XX_CM_TAMPER_TAMPER_CDOFFS			0x0000
+#define AM43XX_CM_CEFUSE_CEFUSE_CDOFFS			0x0000
+#define AM43XX_CM_PER_L3_CDOFFS				0x0000
+#define AM43XX_CM_PER_L3S_CDOFFS			0x0200
+#define AM43XX_CM_PER_ICSS_CDOFFS			0x0300
+#define AM43XX_CM_PER_L4LS_CDOFFS			0x0400
+#define AM43XX_CM_PER_EMIF_CDOFFS			0x0700
+#define AM43XX_CM_PER_DSS_CDOFFS			0x0a00
+#define AM43XX_CM_PER_CPSW_CDOFFS			0x0b00
+#define AM43XX_CM_PER_OCPWP_L3_CDOFFS			0x0c00
+
+/* CLK CTRL offsets */
+#define AM43XX_CM_PER_UART1_CLKCTRL_OFFSET		0x0580
+#define AM43XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0588
+#define AM43XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0590
+#define AM43XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0598
+#define AM43XX_CM_PER_UART5_CLKCTRL_OFFSET		0x05a0
+#define AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x0428
+#define AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x0430
+#define AM43XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0468
+#define AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x0438
+#define AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x0440
+#define AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x0448
+#define AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x0478
+#define AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x0480
+#define AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x0488
+#define AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x04a8
+#define AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x04b0
+#define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x04b8
+#define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x04c0
+#define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x04c8
+#define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x0500
+#define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0508
+#define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x0528
+#define AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0530
+#define AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0538
+#define AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0540
+#define AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x0548
+#define AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x0550
+#define AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x0558
+#define AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x0228
+#define AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0360
+#define AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x0350
+#define AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x0358
+#define AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x0348
+#define AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0328
+#define AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x0340
+#define AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0368
+#define AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x0120
+#define AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0338
+#define AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x0248
+#define AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET               0x0258
+#define AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0238
+#define AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0240
+#define AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0420
+#define AM43XX_CM_PER_L3_CLKCTRL_OFFSET			0x0020
+#define AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x0078
+#define AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0080
+#define AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x0088
+#define AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0090
+#define AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0b20
+#define AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x0320
+#define AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x00a0
+#define AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x0040
+#define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x0050
+#define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x0058
+#define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0028
+#define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET		0x0560
+#define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET		0x0568
+#define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET		0x0570
+#define AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET		0x0578
+#define AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0230
+#define AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET		0x0450
+#define AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET		0x0458
+#define AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET		0x0460
+#define AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0510
+#define AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0518
+#define AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET		0x0520
+#define AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x0490
+#define AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0498
+#define AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET	0x0260
+#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET	0x05B8
+#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET        0x0268
+#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm44xx.h b/arch/arm/mach-omap2/prcm44xx.h
index f429cdd5a118..4fea2cfdf2c3 100644
--- a/arch/arm/mach-omap2/prcm44xx.h
+++ b/arch/arm/mach-omap2/prcm44xx.h
@@ -38,6 +38,11 @@
 #define OMAP54XX_SCRM_PARTITION			4
 #define OMAP54XX_PRCM_MPU_PARTITION		5
 
+#define DRA7XX_PRM_PARTITION                   1
+#define DRA7XX_CM_CORE_AON_PARTITION           2
+#define DRA7XX_CM_CORE_PARTITION               3
+#define DRA7XX_MPU_PRCM_PARTITION              5
+
 /*
  * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
  * IDs, plus one
diff --git a/arch/arm/mach-omap2/prcm_mpu7xx.h b/arch/arm/mach-omap2/prcm_mpu7xx.h
new file mode 100644
index 000000000000..9ebb5ce0878f
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm_mpu7xx.h
@@ -0,0 +1,78 @@
+/*
+ * DRA7xx PRCM MPU instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+
+#include "prcm_mpu_44xx_54xx.h"
+
+#define DRA7XX_PRCM_MPU_BASE			0x48243000
+
+#define DRA7XX_PRCM_MPU_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_PRCM_MPU_BASE + (inst) + (reg))
+
+/* MPU_PRCM instances */
+#define DRA7XX_MPU_PRCM_OCP_SOCKET_INST	0x0000
+#define DRA7XX_MPU_PRCM_DEVICE_INST	0x0200
+#define DRA7XX_MPU_PRCM_PRM_C0_INST	0x0400
+#define DRA7XX_MPU_PRCM_CM_C0_INST	0x0600
+#define DRA7XX_MPU_PRCM_PRM_C1_INST	0x0800
+#define DRA7XX_MPU_PRCM_CM_C1_INST	0x0a00
+
+/* PRCM_MPU clockdomain register offsets (from instance start) */
+#define DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS	0x0000
+#define DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS	0x0000
+
+
+/* MPU_PRCM */
+
+/* MPU_PRCM.PRCM_MPU_OCP_SOCKET register offsets */
+#define DRA7XX_REVISION_PRCM_MPU_OFFSET				0x0000
+
+/* MPU_PRCM.PRCM_MPU_DEVICE register offsets */
+#define DRA7XX_PRM_FRAC_INCREMENTER_NUMERATOR_OFFSET		0x0010
+#define DRA7XX_PRM_FRAC_INCREMENTER_DENUMERATOR_RELOAD_OFFSET	0x0014
+
+/* MPU_PRCM.PRCM_MPU_PRM_C0 register offsets */
+#define DRA7XX_PM_CPU0_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU0_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU0_CPU0_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU0_CPU0_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU0_CPU0_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C0 register offsets */
+#define DRA7XX_CM_CPU0_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C0_INST, 0x0020)
+
+/* MPU_PRCM.PRCM_MPU_PRM_C1 register offsets */
+#define DRA7XX_PM_CPU1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU1_CPU1_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU1_CPU1_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU1_CPU1_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C1 register offsets */
+#define DRA7XX_CM_CPU1_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C1_INST, 0x0020)
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 91aa5106d637..37fc905c9636 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -16,274 +16,27 @@
 
 #include "prm2xxx.h"
 
-/* Bits shared between registers */
-
-/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_ST_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_ST_MASK				(1 << 0)
-
-/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_EN_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_EN_MASK				(1 << 0)
-
-/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
-#define OMAP24XX_EN_MPU_SHIFT				1
-#define OMAP24XX_EN_MPU_MASK				(1 << 1)
 #define OMAP24XX_EN_CORE_SHIFT 				0
-#define OMAP24XX_EN_CORE_MASK				(1 << 0)
-
-/*
- * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
- * shared bits
- */
-#define OMAP24XX_MEMONSTATE_SHIFT			10
-#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEMRETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
 #define OMAP24XX_FORCESTATE_MASK			(1 << 18)
-
-/*
- * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
- * PM_PWSTST_MDM shared bits
- */
-#define OMAP24XX_CLKACTIVITY_MASK			(1 << 19)
-
-/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
-#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
-#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
-
-/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
-#define OMAP2430_MEMSTATEST_SHIFT			10
-#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
-
-/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
-#define OMAP24XX_POWERSTATEST_SHIFT			0
-#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
-
-
-/* Bits specific to each register */
-
-/* PRCM_REVISION */
-#define OMAP24XX_REV_SHIFT				0
-#define OMAP24XX_REV_MASK				(0xff << 0)
-
-/* PRCM_SYSCONFIG */
 #define OMAP24XX_AUTOIDLE_MASK				(1 << 0)
-
-/* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_ST_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_ST_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_ST_MASK			(1 << 3)
-
-/* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_EN_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_EN_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_EN_MASK			(1 << 3)
-
-/* PRCM_VOLTCTRL */
 #define OMAP24XX_AUTO_EXTVOLT_MASK			(1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT_MASK			(1 << 14)
 #define OMAP24XX_SETOFF_LEVEL_SHIFT			12
-#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
 #define OMAP24XX_MEMRETCTRL_MASK			(1 << 8)
 #define OMAP24XX_SETRET_LEVEL_SHIFT			6
-#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
 #define OMAP24XX_VOLT_LEVEL_SHIFT			0
-#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
-
-/* PRCM_VOLTST */
-#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
-#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
-
-/* PRCM_CLKSRC_CTRL specific bits */
-
-/* PRCM_CLKOUT_CTRL */
 #define OMAP2420_CLKOUT2_EN_SHIFT			15
-#define OMAP2420_CLKOUT2_EN_MASK			(1 << 15)
 #define OMAP2420_CLKOUT2_DIV_SHIFT			11
-#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
 #define OMAP2420_CLKOUT2_DIV_WIDTH			3
-#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
 #define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
 #define OMAP24XX_CLKOUT_EN_SHIFT			7
-#define OMAP24XX_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP24XX_CLKOUT_DIV_SHIFT			3
-#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
 #define OMAP24XX_CLKOUT_DIV_WIDTH			3
-#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
 #define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
-
-/* PRCM_CLKEMUL_CTRL */
 #define OMAP24XX_EMULATION_EN_SHIFT			0
-#define OMAP24XX_EMULATION_EN_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS_MASK			(1 << 0)
-
-/* PRCM_VOLTSETUP specific bits */
-
-/* PRCM_CLKSSETUP specific bits */
-
-/* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL_MASK			(1 << 10)
-#define OMAP24XX_CLKOUT_POL_MASK			(1 << 9)
-#define OMAP24XX_CLKREQ_POL_MASK			(1 << 8)
-#define OMAP2430_USE_POWEROK_MASK			(1 << 2)
-#define OMAP2430_POWEROK_POL_MASK			(1 << 1)
-#define OMAP24XX_EXTVOL_POL_MASK			(1 << 0)
-
-/* RM_RSTST_MPU specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
-
-/* PM_WKDEP_MPU specific bits */
 #define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT		5
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK		(1 << 5)
 #define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT		2
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU specific bits */
-
-/* PM_EVEGENONTIM_MPU specific bits */
-
-/* PM_EVEGENOFFTIM_MPU specific bits */
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE_MASK			(1 << 18)
-
-/* PM_PWSTST_MPU specific bits */
-/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_WKEN2_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits*/
-
-/* PM_WKST2_CORE specific bits */
-
-/* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK		(1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK		(1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE_MASK			(1 << 20)
-#define OMAP24XX_MEM3ONSTATE_SHIFT			14
-#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2ONSTATE_SHIFT			12
-#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1ONSTATE_SHIFT			10
-#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE_MASK			(1 << 5)
-#define OMAP24XX_MEM2RETSTATE_MASK			(1 << 4)
-#define OMAP24XX_MEM1RETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP24XX_MEM3STATEST_SHIFT			14
-#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2STATEST_SHIFT			12
-#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1STATEST_SHIFT			10
-#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
-
-/* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST_MASK				(1 << 0)
-
-/* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST_MASK			(1 << 4)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-/* 2430 often calls EN_WAKEUP "EN_WKUP" */
-
-/* RM_RSTCTRL_WKUP specific bits */
-
-/* RM_RSTTIME_WKUP specific bits */
-
-/* RM_RSTST_WKUP specific bits */
-/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
 #define OMAP24XX_EXTWMPU_RST_SHIFT			6
-#define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
 #define OMAP24XX_SECU_WD_RST_SHIFT			5
-#define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
 #define OMAP24XX_MPU_WD_RST_SHIFT			4
-#define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
 #define OMAP24XX_SECU_VIOL_RST_SHIFT			3
-#define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
-
-/* PM_WKEN_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
-
-/* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA_MASK				(1 << 8)
-#define OMAP24XX_RST2_DSP_MASK				(1 << 1)
-#define OMAP24XX_RST1_DSP_MASK				(1 << 0)
-
-/* RM_RSTST_DSP specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST_MASK			(1 << 8)
-#define OMAP24XX_DSP_SW_RST2_MASK			(1 << 5)
-#define OMAP24XX_DSP_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKDEP_DSP specific bits */
-
-/* PM_PWSTCTRL_DSP specific bits */
-/* 2430 only: MEMONSTATE, MEMRETSTATE */
-#define OMAP2420_MEMIONSTATE_SHIFT			12
-#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
-#define OMAP2420_MEMIRETSTATE_MASK			(1 << 4)
-
-/* PM_PWSTST_DSP specific bits */
-/* MEMSTATEST is 2430 only */
-#define OMAP2420_MEMISTATEST_SHIFT			12
-#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
-
-/* PRCM_IRQSTATUS_DSP specific bits */
-
-/* PRCM_IRQENABLE_DSP specific bits */
-
-/* RM_RSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_PWRON1_MDM_MASK			(1 << 1)
-#define OMAP2430_RST1_MDM_MASK				(1 << 0)
-
-/* RM_RSTST_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL_MASK			(1 << 6)
-#define OMAP2430_MDM_SW_PWRON1_MASK			(1 << 5)
-#define OMAP2430_MDM_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKEN_MDM */
-/* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* PM_WKST_MDM specific bits */
-/* 2430 only */
-
-/* PM_WKDEP_MDM specific bits */
-/* 2430 only */
-
-/* PM_PWSTCTRL_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP_MASK			(1 << 19)
-
-/* PM_PWSTST_MDM specific bits */
-/* 2430 only */
-
-/* PRCM_IRQSTATUS_IVA */
-/* 2420 only */
-
-/* PRCM_IRQENABLE_IVA */
-/* 2420 only */
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 0221b5c20e87..84feecee4fe6 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -18,340 +18,35 @@
 
 #include "prm.h"
 
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT			1
-#define AM33XX_ABBOFF_ACT_EXPORT_MASK			(1 << 1)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT		2
-#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK			(1 << 2)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_AIPOFF_SHIFT				8
-#define AM33XX_AIPOFF_MASK				(1 << 8)
-
-/* Used by PM_WKUP_PWRSTST */
-#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT		17
-#define AM33XX_DEBUGSS_MEM_STATEST_MASK			(0x3 << 17)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_DISABLE_RTA_EXPORT_SHIFT			0
-#define AM33XX_DISABLE_RTA_EXPORT_MASK			(1 << 0)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT			12
-#define AM33XX_DPLL_CORE_RECAL_EN_MASK			(1 << 12)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT			12
-#define AM33XX_DPLL_CORE_RECAL_ST_MASK			(1 << 12)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT			14
-#define AM33XX_DPLL_DDR_RECAL_EN_MASK			(1 << 14)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT			14
-#define AM33XX_DPLL_DDR_RECAL_ST_MASK			(1 << 14)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT			15
-#define AM33XX_DPLL_DISP_RECAL_EN_MASK			(1 << 15)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT			13
-#define AM33XX_DPLL_DISP_RECAL_ST_MASK			(1 << 13)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT			11
-#define AM33XX_DPLL_MPU_RECAL_EN_MASK			(1 << 11)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT			11
-#define AM33XX_DPLL_MPU_RECAL_ST_MASK			(1 << 11)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_PER_RECAL_EN_SHIFT			13
-#define AM33XX_DPLL_PER_RECAL_EN_MASK			(1 << 13)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_PER_RECAL_ST_SHIFT			15
-#define AM33XX_DPLL_PER_RECAL_ST_MASK			(1 << 15)
-
-/* Used by RM_WKUP_RSTST */
-#define AM33XX_EMULATION_M3_RST_SHIFT			6
-#define AM33XX_EMULATION_M3_RST_MASK			(1 << 6)
-
-/* Used by RM_MPU_RSTST */
-#define AM33XX_EMULATION_MPU_RST_SHIFT			5
-#define AM33XX_EMULATION_MPU_RST_MASK			(1 << 5)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC1_EXPORT_SHIFT			3
-#define AM33XX_ENFUNC1_EXPORT_MASK			(1 << 3)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC3_EXPORT_SHIFT			5
-#define AM33XX_ENFUNC3_EXPORT_MASK			(1 << 5)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC4_SHIFT				6
-#define AM33XX_ENFUNC4_MASK				(1 << 6)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC5_SHIFT				7
-#define AM33XX_ENFUNC5_MASK				(1 << 7)
-
-/* Used by PRM_RSTST */
-#define AM33XX_EXTERNAL_WARM_RST_SHIFT			5
-#define AM33XX_EXTERNAL_WARM_RST_MASK			(1 << 5)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_FORCEWKUP_EN_SHIFT			10
-#define AM33XX_FORCEWKUP_EN_MASK			(1 << 10)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_FORCEWKUP_ST_SHIFT			10
-#define AM33XX_FORCEWKUP_ST_MASK			(1 << 10)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define AM33XX_GFX_MEM_ONSTATE_SHIFT			17
 #define AM33XX_GFX_MEM_ONSTATE_MASK			(0x3 << 17)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define AM33XX_GFX_MEM_RETSTATE_SHIFT			6
 #define AM33XX_GFX_MEM_RETSTATE_MASK			(1 << 6)
-
-/* Used by PM_GFX_PWRSTST */
-#define AM33XX_GFX_MEM_STATEST_SHIFT			4
 #define AM33XX_GFX_MEM_STATEST_MASK			(0x3 << 4)
-
-/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
-#define AM33XX_GFX_RST_SHIFT				0
-#define AM33XX_GFX_RST_MASK				(1 << 0)
-
-/* Used by PRM_RSTST */
-#define AM33XX_GLOBAL_COLD_RST_SHIFT			0
-#define AM33XX_GLOBAL_COLD_RST_MASK			(1 << 0)
-
-/* Used by PRM_RSTST */
-#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT			1
 #define AM33XX_GLOBAL_WARM_SW_RST_MASK			(1 << 1)
-
-/* Used by RM_WKUP_RSTST */
-#define AM33XX_ICECRUSHER_M3_RST_SHIFT			7
-#define AM33XX_ICECRUSHER_M3_RST_MASK			(1 << 7)
-
-/* Used by RM_MPU_RSTST */
-#define AM33XX_ICECRUSHER_MPU_RST_SHIFT			6
-#define AM33XX_ICECRUSHER_MPU_RST_MASK			(1 << 6)
-
-/* Used by PRM_RSTST */
-#define AM33XX_ICEPICK_RST_SHIFT			9
-#define AM33XX_ICEPICK_RST_MASK				(1 << 9)
-
-/* Used by RM_PER_RSTCTRL */
-#define AM33XX_PRUSS_LRST_SHIFT				1
-#define AM33XX_PRUSS_LRST_MASK				(1 << 1)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT			5
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
 #define AM33XX_PRUSS_MEM_ONSTATE_MASK			(0x3 << 5)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT			7
 #define AM33XX_PRUSS_MEM_RETSTATE_MASK			(1 << 7)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_PRUSS_MEM_STATEST_SHIFT			23
 #define AM33XX_PRUSS_MEM_STATEST_MASK			(0x3 << 23)
-
-/*
- * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
- * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
- */
-#define AM33XX_INTRANSITION_SHIFT			20
-#define AM33XX_INTRANSITION_MASK			(1 << 20)
-
-/* Used by PM_CEFUSE_PWRSTST */
 #define AM33XX_LASTPOWERSTATEENTERED_SHIFT		24
 #define AM33XX_LASTPOWERSTATEENTERED_MASK		(0x3 << 24)
-
-/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
-#define AM33XX_LOGICRETSTATE_SHIFT			2
 #define AM33XX_LOGICRETSTATE_MASK			(1 << 2)
-
-/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
-#define AM33XX_LOGICRETSTATE_3_3_SHIFT			3
 #define AM33XX_LOGICRETSTATE_3_3_MASK			(1 << 3)
-
-/*
- * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
- * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
- */
 #define AM33XX_LOGICSTATEST_SHIFT			2
 #define AM33XX_LOGICSTATEST_MASK			(1 << 2)
-
-/*
- * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
- */
 #define AM33XX_LOWPOWERSTATECHANGE_SHIFT		4
 #define AM33XX_LOWPOWERSTATECHANGE_MASK			(1 << 4)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L1_ONSTATE_SHIFT			18
 #define AM33XX_MPU_L1_ONSTATE_MASK			(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L1_RETSTATE_SHIFT			22
 #define AM33XX_MPU_L1_RETSTATE_MASK			(1 << 22)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_L1_STATEST_SHIFT			6
 #define AM33XX_MPU_L1_STATEST_MASK			(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L2_ONSTATE_SHIFT			20
 #define AM33XX_MPU_L2_ONSTATE_MASK			(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L2_RETSTATE_SHIFT			23
 #define AM33XX_MPU_L2_RETSTATE_MASK			(1 << 23)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_L2_STATEST_SHIFT			8
 #define AM33XX_MPU_L2_STATEST_MASK			(0x3 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_RAM_ONSTATE_SHIFT			16
 #define AM33XX_MPU_RAM_ONSTATE_MASK			(0x3 << 16)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_RAM_RETSTATE_SHIFT			24
 #define AM33XX_MPU_RAM_RETSTATE_MASK			(1 << 24)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_RAM_STATEST_SHIFT			4
 #define AM33XX_MPU_RAM_STATEST_MASK			(0x3 << 4)
-
-/* Used by PRM_RSTST */
-#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT		2
-#define AM33XX_MPU_SECURITY_VIOL_RST_MASK		(1 << 2)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_PCHARGECNT_VALUE_SHIFT			0
-#define AM33XX_PCHARGECNT_VALUE_MASK			(0x3f << 0)
-
-/* Used by RM_PER_RSTCTRL */
-#define AM33XX_PCI_LRST_SHIFT				0
-#define AM33XX_PCI_LRST_MASK				(1 << 0)
-
-/* Renamed from PCI_LRST Used by RM_PER_RSTST */
-#define AM33XX_PCI_LRST_5_5_SHIFT			5
-#define AM33XX_PCI_LRST_5_5_MASK			(1 << 5)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PER_MEM_ONSTATE_SHIFT			25
 #define AM33XX_PER_MEM_ONSTATE_MASK			(0x3 << 25)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PER_MEM_RETSTATE_SHIFT			29
 #define AM33XX_PER_MEM_RETSTATE_MASK			(1 << 29)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_PER_MEM_STATEST_SHIFT			17
 #define AM33XX_PER_MEM_STATEST_MASK			(0x3 << 17)
-
-/*
- * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL
- */
-#define AM33XX_POWERSTATE_SHIFT				0
-#define AM33XX_POWERSTATE_MASK				(0x3 << 0)
-
-/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
-#define AM33XX_POWERSTATEST_SHIFT			0
-#define AM33XX_POWERSTATEST_MASK			(0x3 << 0)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_RAM_MEM_ONSTATE_SHIFT			30
 #define AM33XX_RAM_MEM_ONSTATE_MASK			(0x3 << 30)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_RAM_MEM_RETSTATE_SHIFT			27
 #define AM33XX_RAM_MEM_RETSTATE_MASK			(1 << 27)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_RAM_MEM_STATEST_SHIFT			21
 #define AM33XX_RAM_MEM_STATEST_MASK			(0x3 << 21)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_RETMODE_ENABLE_SHIFT			0
-#define AM33XX_RETMODE_ENABLE_MASK			(1 << 0)
-
-/* Used by REVISION_PRM */
-#define AM33XX_REV_SHIFT				0
-#define AM33XX_REV_MASK					(0xff << 0)
-
-/* Used by PRM_RSTTIME */
-#define AM33XX_RSTTIME1_SHIFT				0
-#define AM33XX_RSTTIME1_MASK				(0xff << 0)
-
-/* Used by PRM_RSTTIME */
-#define AM33XX_RSTTIME2_SHIFT				8
-#define AM33XX_RSTTIME2_MASK				(0x1f << 8)
-
-/* Used by PRM_RSTCTRL */
-#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT			1
-#define AM33XX_RST_GLOBAL_COLD_SW_MASK			(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT			0
-#define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_SLPCNT_VALUE_SHIFT			16
-#define AM33XX_SLPCNT_VALUE_MASK			(0xff << 16)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_SRAMLDO_STATUS_SHIFT			8
-#define AM33XX_SRAMLDO_STATUS_MASK			(1 << 8)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_SRAM_IN_TRANSITION_SHIFT			9
-#define AM33XX_SRAM_IN_TRANSITION_MASK			(1 << 9)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_STARTUP_COUNT_SHIFT			24
-#define AM33XX_STARTUP_COUNT_MASK			(0xff << 24)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_TRANSITION_EN_SHIFT			8
-#define AM33XX_TRANSITION_EN_MASK			(1 << 8)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_TRANSITION_ST_SHIFT			8
-#define AM33XX_TRANSITION_ST_MASK			(1 << 8)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_VSETUPCNT_VALUE_SHIFT			8
-#define AM33XX_VSETUPCNT_VALUE_MASK			(0xff << 8)
-
-/* Used by PRM_RSTST */
-#define AM33XX_WDT0_RST_SHIFT				3
-#define AM33XX_WDT0_RST_MASK				(1 << 3)
-
-/* Used by PRM_RSTST */
-#define AM33XX_WDT1_RST_SHIFT				4
-#define AM33XX_WDT1_RST_MASK				(1 << 4)
-
-/* Used by RM_WKUP_RSTCTRL */
-#define AM33XX_WKUP_M3_LRST_SHIFT			3
-#define AM33XX_WKUP_M3_LRST_MASK			(1 << 3)
-
-/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
-#define AM33XX_WKUP_M3_LRST_5_5_SHIFT			5
-#define AM33XX_WKUP_M3_LRST_5_5_MASK			(1 << 5)
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index b0a2142eeb91..cebad565ed37 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -16,115 +16,25 @@
 
 #include "prm3xxx.h"
 
-/* Shared register bits */
-
-/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
-#define OMAP3430_ON_SHIFT				24
-#define OMAP3430_ON_MASK				(0xff << 24)
-#define OMAP3430_ONLP_SHIFT				16
-#define OMAP3430_ONLP_MASK				(0xff << 16)
-#define OMAP3430_RET_SHIFT				8
-#define OMAP3430_RET_MASK				(0xff << 8)
-#define OMAP3430_OFF_SHIFT				0
-#define OMAP3430_OFF_MASK				(0xff << 0)
-
-/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
-#define OMAP3430_ERROROFFSET_SHIFT			24
 #define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
-#define OMAP3430_ERRORGAIN_SHIFT			16
 #define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
-#define OMAP3430_INITVOLTAGE_SHIFT			8
 #define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
 #define OMAP3430_TIMEOUTEN_MASK				(1 << 3)
 #define OMAP3430_INITVDD_MASK				(1 << 2)
 #define OMAP3430_FORCEUPDATE_MASK			(1 << 1)
 #define OMAP3430_VPENABLE_MASK				(1 << 0)
-
-/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
 #define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
 #define OMAP3430_VSTEPMIN_SHIFT				0
-#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
-
-/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
 #define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
 #define OMAP3430_VSTEPMAX_SHIFT				0
-#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
-
-/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
 #define OMAP3430_VDDMAX_SHIFT				24
-#define OMAP3430_VDDMAX_MASK				(0xff << 24)
 #define OMAP3430_VDDMIN_SHIFT				16
-#define OMAP3430_VDDMIN_MASK				(0xff << 16)
 #define OMAP3430_TIMEOUT_SHIFT				0
-#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
-
-/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
-#define OMAP3430_VPVOLTAGE_SHIFT			0
 #define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
-
-/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE_MASK				(1 << 0)
-
-/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
 #define OMAP3430_EN_PER_SHIFT				7
-#define OMAP3430_EN_PER_MASK				(1 << 7)
-
-/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE_MASK			(1 << 3)
-
-/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
 #define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
-
-/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
 #define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
-
-/*
- * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
- * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
- * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
- */
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT		0
 #define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
-
-/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST_MASK				(1 << 0)
-
-/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN_MASK				(1 << 0)
-
-/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2_MASK			(1 << 25)
-#define OMAP3430_GRPSEL_MMC1_MASK			(1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_GRPSEL_I2C3_SHIFT			17
-#define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
-#define OMAP3430_GRPSEL_I2C2_SHIFT			16
-#define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
-#define OMAP3430_GRPSEL_I2C1_SHIFT			15
-#define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
-#define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
-#define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
-#define OMAP3430_GRPSEL_GPT11_MASK			(1 << 12)
-#define OMAP3430_GRPSEL_GPT10_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_D2D_MASK			(1 << 3)
-
-/*
- * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
- * PM_PWSTCTRL_PER shared bits
- */
-#define OMAP3430_MEMONSTATE_SHIFT			16
-#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
-
-/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
 #define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
@@ -132,480 +42,89 @@
 #define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
 #define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
 #define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_GPT9_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
-#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
-#define OMAP3430_GRPSEL_GPT4_MASK			(1 << 5)
-#define OMAP3430_GRPSEL_GPT3_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_GPT2_MASK			(1 << 3)
 #define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
-
-/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO_MASK				(1 << 8)
-#define OMAP3430_GRPSEL_SR2_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_SR1_MASK			(1 << 6)
 #define OMAP3430_GRPSEL_GPIO1_MASK			(1 << 3)
 #define OMAP3430_GRPSEL_GPT12_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_GPT1_MASK			(1 << 0)
-
-/* Bits specific to each register */
-
-/* RM_RSTCTRL_IVA2 */
 #define OMAP3430_RST3_IVA2_MASK				(1 << 2)
 #define OMAP3430_RST2_IVA2_MASK				(1 << 1)
 #define OMAP3430_RST1_IVA2_MASK				(1 << 0)
-
-/* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST_MASK		(1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST_MASK		(1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST_MASK		(1 << 11)
-#define OMAP3430_IVA2_SW_RST3_MASK			(1 << 10)
-#define OMAP3430_IVA2_SW_RST2_MASK			(1 << 9)
-#define OMAP3430_IVA2_SW_RST1_MASK			(1 << 8)
-
-/* PM_WKDEP_IVA2 specific bits */
-
-/* PM_PWSTCTRL_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
 #define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
-#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
 #define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
-#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
 #define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
 #define OMAP3430_L2FLATMEMRETSTATE_MASK			(1 << 11)
 #define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK		(1 << 10)
 #define OMAP3430_L1FLATMEMRETSTATE_MASK			(1 << 9)
 #define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK		(1 << 8)
-
-/* PM_PWSTST_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
 #define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
-#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
 #define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
-#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
 #define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
-#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
 #define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
-
-/* PM_PREPWSTST_IVA2 specific bits */
-#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
 #define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
-#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
 #define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
-
-/* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_EN_MASK				(1 << 1)
-
-/* PRM_REVISION specific bits */
-
-/* PRM_SYSCONFIG specific bits */
-
-/* PRM_IRQSTATUS_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST_MASK			(1 << 24)
-#define OMAP3430_VC_RAERR_ST_MASK			(1 << 23)
-#define OMAP3430_VC_SAERR_ST_MASK			(1 << 22)
 #define OMAP3430_VP2_TRANXDONE_ST_MASK			(1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST_MASK			(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST_MASK			(1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST_MASK			(1 << 18)
-#define OMAP3430_VP2_MINVDD_ST_MASK			(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK		(1 << 16)
 #define OMAP3430_VP1_TRANXDONE_ST_MASK			(1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST_MASK			(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST_MASK			(1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST_MASK			(1 << 12)
-#define OMAP3430_VP1_MINVDD_ST_MASK			(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK		(1 << 10)
-#define OMAP3430_IO_ST_MASK				(1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
-#define OMAP3430_MPU_DPLL_ST_MASK			(1 << 7)
 #define OMAP3430_MPU_DPLL_ST_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_ST_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
-#define OMAP3430_CORE_DPLL_ST_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_ST_SHIFT			5
-#define OMAP3430_TRANSITION_ST_MASK			(1 << 4)
-#define OMAP3430_EVGENOFF_ST_MASK			(1 << 3)
-#define OMAP3430_EVGENON_ST_MASK			(1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN_MASK				(1 << 24)
-#define OMAP3430_VC_RAERR_EN_MASK				(1 << 23)
-#define OMAP3430_VC_SAERR_EN_MASK				(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN_MASK				(1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN_MASK				(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN_MASK				(1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN_MASK				(1 << 18)
-#define OMAP3430_VP2_MINVDD_EN_MASK				(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK			(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN_MASK				(1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN_MASK				(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN_MASK				(1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN_MASK				(1 << 12)
-#define OMAP3430_VP1_MINVDD_EN_MASK				(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK			(1 << 10)
-#define OMAP3430_IO_EN_MASK					(1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
-#define OMAP3430_MPU_DPLL_RECAL_EN_MASK				(1 << 7)
 #define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
-#define OMAP3430_CORE_DPLL_RECAL_EN_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
-#define OMAP3430_TRANSITION_EN_MASK				(1 << 4)
-#define OMAP3430_EVGENOFF_EN_MASK				(1 << 3)
-#define OMAP3430_EVGENON_EN_MASK				(1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN_MASK				(1 << 1)
-
-/* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST_MASK			(1 << 11)
-
-/* PM_WKDEP_MPU specific bits */
 #define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK		(1 << 5)
 #define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT		2
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP3430_OFFLOADMODE_SHIFT			3
-#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
-#define OMAP3430_ONLOADMODE_SHIFT			1
-#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
-#define OMAP3430_ENABLE_MASK				(1 << 0)
-
-/* PM_EVGENONTIM_MPU */
-#define OMAP3430_ONTIMEVAL_SHIFT			0
-#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-#define OMAP3430_OFFTIMEVAL_SHIFT			0
-#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP3430_L2CACHEONSTATE_SHIFT			16
-#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE_MASK			(1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE_MASK		(1 << 2)
-
-/* PM_PWSTST_MPU specific bits */
-#define OMAP3430_L2CACHESTATEST_SHIFT			6
-#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST_MASK		(1 << 2)
-
-/* PM_PREPWSTST_MPU specific bits */
-#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK	(1 << 2)
-
-/* RM_RSTCTRL_CORE */
 #define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK		(1 << 1)
 #define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK		(1 << 0)
-
-/* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK		(1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK	(1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK	(1 << 8)
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB_MASK			(1 << 5)
-
-/* PM_IVA2GRPSEL1_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits */
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP3430_MEM2ONSTATE_SHIFT			18
-#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_MEM1ONSTATE_SHIFT			16
-#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEM2RETSTATE_MASK			(1 << 9)
-#define OMAP3430_MEM1RETSTATE_MASK			(1 << 8)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP3430_MEM2STATEST_SHIFT			6
-#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
-#define OMAP3430_MEM1STATEST_SHIFT			4
-#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
-
-/* PM_PREPWSTST_CORE specific bits */
-#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
 #define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
 #define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
-
-/* RM_RSTST_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_PWSTST_GFX specific bits */
-
-/* PM_PREPWSTST_GFX specific bits */
-
-/* PM_WKEN_WKUP specific bits */
 #define OMAP3430_EN_IO_CHAIN_MASK			(1 << 16)
 #define OMAP3430_EN_IO_MASK				(1 << 8)
 #define OMAP3430_EN_GPIO1_MASK				(1 << 3)
-
-/* PM_MPUGRPSEL_WKUP specific bits */
-
-/* PM_IVA2GRPSEL_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
 #define OMAP3430_ST_IO_CHAIN_MASK			(1 << 16)
 #define OMAP3430_ST_IO_MASK				(1 << 8)
-
-/* PRM_CLKSEL */
 #define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
-#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
 #define OMAP3430_SYS_CLKIN_SEL_WIDTH			3
-
-/* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP3430_CLKOUT_EN_SHIFT			7
-
-/* RM_RSTST_DSS specific bits */
-
-/* PM_WKEN_DSS */
 #define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK		(1 << 0)
-
-/* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_DSS specific bits */
-
-/* PM_PWSTST_DSS specific bits */
-
-/* PM_PREPWSTST_DSS specific bits */
-
-/* RM_RSTST_CAM specific bits */
-
-/* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CAM specific bits */
-
-/* PM_PWSTST_CAM specific bits */
-
-/* PM_PREPWSTST_CAM specific bits */
-
-/* PM_PWSTCTRL_USBHOST specific bits */
 #define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
-
-/* RM_RSTST_PER specific bits */
-
-/* PM_WKEN_PER specific bits */
-
-/* PM_MPUGRPSEL_PER specific bits */
-
-/* PM_IVA2GRPSEL_PER specific bits */
-
-/* PM_WKST_PER specific bits */
-
-/* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_PER specific bits */
-
-/* PM_PWSTST_PER specific bits */
-
-/* PM_PREPWSTST_PER specific bits */
-
-/* RM_RSTST_EMU specific bits */
-
-/* PM_PWSTST_EMU specific bits */
-
-/* PRM_VC_SMPS_SA */
 #define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
 #define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
 #define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
 #define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
-
-/* PRM_VC_SMPS_VOL_RA */
-#define OMAP3430_VOLRA1_SHIFT				16
 #define OMAP3430_VOLRA1_MASK				(0xff << 16)
-#define OMAP3430_VOLRA0_SHIFT				0
 #define OMAP3430_VOLRA0_MASK				(0xff << 0)
-
-/* PRM_VC_SMPS_CMD_RA */
-#define OMAP3430_CMDRA1_SHIFT				16
 #define OMAP3430_CMDRA1_MASK				(0xff << 16)
-#define OMAP3430_CMDRA0_SHIFT				0
 #define OMAP3430_CMDRA0_MASK				(0xff << 0)
-
-/* PRM_VC_CMD_VAL_0 specific bits */
 #define OMAP3430_VC_CMD_ON_SHIFT			24
 #define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
-#define OMAP3430_VC_CMD_ONLP_MASK			(0xFF << 16)
 #define OMAP3430_VC_CMD_RET_SHIFT			8
-#define OMAP3430_VC_CMD_RET_MASK			(0xFF << 8)
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
-#define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
-
-/* PRM_VC_CMD_VAL_1 specific bits */
-
-/* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1_MASK				(1 << 20)
-#define OMAP3430_RACEN1_MASK				(1 << 19)
-#define OMAP3430_RAC1_MASK				(1 << 18)
-#define OMAP3430_RAV1_MASK				(1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK		(1 << 16)
-#define OMAP3430_CMD0_MASK				(1 << 4)
-#define OMAP3430_RACEN0_MASK				(1 << 3)
-#define OMAP3430_RAC0_MASK				(1 << 2)
-#define OMAP3430_RAV0_MASK				(1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK		(1 << 0)
-
-/* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER_MASK				(1 << 5)
-#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
-#define OMAP3430_MCODE_SHIFT				0
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
-
-/* PRM_VC_BYPASS_VAL */
 #define OMAP3430_VALID_MASK				(1 << 24)
 #define OMAP3430_DATA_SHIFT				16
-#define OMAP3430_DATA_MASK				(0xff << 16)
 #define OMAP3430_REGADDR_SHIFT				8
-#define OMAP3430_REGADDR_MASK				(0xff << 8)
 #define OMAP3430_SLAVEADDR_SHIFT			0
-#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
-
-/* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3_MASK				(1 << 2)
-#define OMAP3430_RST_GS_MASK				(1 << 1)
-
-/* PRM_RSTTIME */
-#define OMAP3430_RSTTIME2_SHIFT				8
-#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
-#define OMAP3430_RSTTIME1_SHIFT				0
-#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
-
-/* PRM_RSTST */
 #define OMAP3430_ICECRUSHER_RST_SHIFT			10
-#define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
 #define OMAP3430_ICEPICK_RST_SHIFT			9
-#define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
 #define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT		8
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
 #define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT		7
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
 #define OMAP3430_EXTERNAL_WARM_RST_SHIFT		6
-#define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
 #define OMAP3430_SECURE_WD_RST_SHIFT			5
-#define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
 #define OMAP3430_MPU_WD_RST_SHIFT			4
-#define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
 #define OMAP3430_SECURITY_VIOL_RST_SHIFT		3
-#define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
 #define OMAP3430_GLOBAL_SW_RST_SHIFT			1
-#define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
 #define OMAP3430_GLOBAL_COLD_RST_SHIFT			0
 #define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
-
-/* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE_MASK				(1 << 4)
 #define OMAP3430_SEL_OFF_MASK				(1 << 3)
 #define OMAP3430_AUTO_OFF_MASK				(1 << 2)
-#define OMAP3430_AUTO_RET_MASK				(1 << 1)
-#define OMAP3430_AUTO_SLEEP_MASK			(1 << 0)
-
-/* PRM_SRAM_PCHARGE */
-#define OMAP3430_PCHARGE_TIME_SHIFT			0
-#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
-
-/* PRM_CLKSRC_CTRL */
-#define OMAP3430_SYSCLKDIV_SHIFT			6
-#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
-#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
-#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
-#define OMAP3430_SYSCLKSEL_SHIFT			0
-#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
-
-/* PRM_VOLTSETUP1 */
-#define OMAP3430_SETUP_TIME2_SHIFT			16
 #define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
-#define OMAP3430_SETUP_TIME1_SHIFT			0
 #define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
-
-/* PRM_VOLTOFFSET */
-#define OMAP3430_OFFSET_TIME_SHIFT			0
-#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
-
-/* PRM_CLKSETUP */
-#define OMAP3430_SETUP_TIME_SHIFT			0
-#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
-
-/* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL_MASK			(1 << 3)
-#define OMAP3430_CLKOUT_POL_MASK			(1 << 2)
-#define OMAP3430_CLKREQ_POL_MASK			(1 << 1)
-#define OMAP3430_EXTVOL_POL_MASK			(1 << 0)
-
-/* PRM_VOLTSETUP2 */
-#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
-#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
-
-/* PRM_VP1_CONFIG specific bits */
-
-/* PRM_VP1_VSTEPMIN specific bits */
-
-/* PRM_VP1_VSTEPMAX specific bits */
-
-/* PRM_VP1_VLIMITTO specific bits */
-
-/* PRM_VP1_VOLTAGE specific bits */
-
-/* PRM_VP1_STATUS specific bits */
-
-/* PRM_VP2_CONFIG specific bits */
-
-/* PRM_VP2_VSTEPMIN specific bits */
-
-/* PRM_VP2_VSTEPMAX specific bits */
-
-/* PRM_VP2_VLIMITTO specific bits */
-
-/* PRM_VP2_VOLTAGE specific bits */
-
-/* PRM_VP2_STATUS specific bits */
-
-/* RM_RSTST_NEON specific bits */
-
-/* PM_WKDEP_NEON specific bits */
-
-/* PM_PWSTCTRL_NEON specific bits */
-
-/* PM_PWSTST_NEON specific bits */
-
-/* PM_PREPWSTST_NEON specific bits */
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 3cb247bebdaa..b1c7a33e00e7 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -22,2306 +22,80 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				1
-#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					(1 << 1)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				2
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				(1 << 2)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_EN_MASK					(1 << 31)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_ST_MASK					(1 << 31)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_EN_MASK					(1 << 7)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_ST_MASK					(1 << 7)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					2
-#define OMAP4430_ACTIVE_FBB_SEL_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					1
-#define OMAP4430_ACTIVE_RBB_SEL_MASK					(1 << 1)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_ONSTATE_SHIFT					16
-#define OMAP4430_AESSMEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_RETSTATE_SHIFT					8
-#define OMAP4430_AESSMEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_AESSMEM_STATEST_SHIFT					4
-#define OMAP4430_AESSMEM_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_AIPOFF_SHIFT						8
-#define OMAP4430_AIPOFF_MASK						(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				0
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				(0x3 << 0)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				4
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				(0x3 << 4)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				2
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				(0x3 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_RA_ERR_SHIFT					25
-#define OMAP4430_BYPS_RA_ERR_MASK					(1 << 25)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_SA_ERR_SHIFT					24
-#define OMAP4430_BYPS_SA_ERR_MASK					(1 << 24)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_TIMEOUT_ERR_SHIFT					26
-#define OMAP4430_BYPS_TIMEOUT_ERR_MASK					(1 << 26)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_C2C_RST_SHIFT						10
-#define OMAP4430_C2C_RST_MASK						(1 << 10)
-
-/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_CAM_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_CAM_PWRSTST */
-#define OMAP4430_CAM_MEM_STATEST_SHIFT					4
-#define OMAP4430_CAM_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_CLKREQCTRL */
-#define OMAP4430_CLKREQ_COND_SHIFT					0
-#define OMAP4430_CLKREQ_COND_MASK					(0x7 << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_CMDRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_CMDRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_CMDRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_CORE_L_SHIFT					4
-#define OMAP4430_CMD_VDD_CORE_L_MASK					(1 << 4)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_IVA_L_SHIFT					12
-#define OMAP4430_CMD_VDD_IVA_L_MASK					(1 << 12)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_MPU_L_SHIFT					17
-#define OMAP4430_CMD_VDD_MPU_L_MASK					(1 << 17)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				18
-#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				9
-#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				6
-#define OMAP4430_CORE_OCMRAM_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				4
-#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				(0x3 << 4)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_CUSTOM_SHIFT						6
-#define OMAP4430_CUSTOM_MASK						(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_DATA_SHIFT						16
-#define OMAP4430_DATA_MASK						(0xff << 16)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				0
-#define OMAP4430_DEVICE_OFF_ENABLE_MASK					(1 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_DFILTEREN_SHIFT					6
-#define OMAP4430_DFILTEREN_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
- */
-#define OMAP4430_DISABLE_RTA_EXPORT_SHIFT				0
-#define OMAP4430_DISABLE_RTA_EXPORT_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_EN_MASK					(1 << 3)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_ST_MASK					(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				(1 << 7)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				(1 << 7)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_DSS_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_DSS_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_DSS_PWRSTST */
-#define OMAP4430_DSS_MEM_STATEST_SHIFT					4
-#define OMAP4430_DSS_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				20
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				10
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				8
-#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				22
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				(0x3 << 22)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				11
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				(1 << 11)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				10
-#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				(0x3 << 10)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT				8
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK				(1 << 8)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT				9
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK				(1 << 9)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_EMULATION_RST_SHIFT					0
-#define OMAP4430_EMULATION_RST_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST1ST_SHIFT					3
-#define OMAP4430_EMULATION_RST1ST_MASK					(1 << 3)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST2ST_SHIFT					4
-#define OMAP4430_EMULATION_RST2ST_MASK					(1 << 4)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				3
-#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				(1 << 3)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				4
-#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				(1 << 4)
-
-/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					16
-#define OMAP4430_EMU_BANK_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_EMU_PWRSTST */
-#define OMAP4430_EMU_BANK_STATEST_SHIFT					4
-#define OMAP4430_EMU_BANK_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC1_EXPORT_SHIFT					3
-#define OMAP4430_ENFUNC1_EXPORT_MASK					(1 << 3)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC3_EXPORT_SHIFT					5
-#define OMAP4430_ENFUNC3_EXPORT_MASK					(1 << 5)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC4_SHIFT						6
-#define OMAP4430_ENFUNC4_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC5_SHIFT						7
-#define OMAP4430_ENFUNC5_MASK						(1 << 7)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERRORGAIN_SHIFT					16
 #define OMAP4430_ERRORGAIN_MASK						(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERROROFFSET_SHIFT					24
 #define OMAP4430_ERROROFFSET_MASK					(0xff << 24)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_EXTERNAL_WARM_RST_SHIFT				5
-#define OMAP4430_EXTERNAL_WARM_RST_MASK					(1 << 5)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_FORCEUPDATE_SHIFT					1
 #define OMAP4430_FORCEUPDATE_MASK					(1 << 1)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_FORCEUPDATEWAIT_SHIFT					8
-#define OMAP4430_FORCEUPDATEWAIT_MASK					(0xffffff << 8)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
-#define OMAP4430_FORCEWKUP_EN_SHIFT					10
-#define OMAP4430_FORCEWKUP_EN_MASK					(1 << 10)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_FORCEWKUP_ST_SHIFT					10
-#define OMAP4430_FORCEWKUP_ST_MASK					(1 << 10)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_FUNC_SHIFT						16
-#define OMAP4430_FUNC_MASK						(0xfff << 16)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_GFX_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_GFX_PWRSTST */
-#define OMAP4430_GFX_MEM_STATEST_SHIFT					4
-#define OMAP4430_GFX_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_COLD_RST_SHIFT					0
-#define OMAP4430_GLOBAL_COLD_RST_MASK					(1 << 0)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
-#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_GLOBAL_WUEN_SHIFT					16
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMCODE_SHIFT						0
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMODEEN_SHIFT						3
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLH_SHIFT						16
-#define OMAP4430_HSSCLH_MASK						(0xff << 16)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_HSSCLL_SHIFT						24
-#define OMAP4430_HSSCLL_MASK						(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_HWA_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_HWA_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_HWA_MEM_STATEST_SHIFT					4
-#define OMAP4430_HWA_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				1
-#define OMAP4430_ICECRUSHER_MPU_RST_MASK				(1 << 1)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_RST1ST_MASK					(1 << 5)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_RST2ST_MASK					(1 << 6)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				(1 << 5)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				(1 << 6)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_ICEPICK_RST_SHIFT					9
-#define OMAP4430_ICEPICK_RST_MASK					(1 << 9)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVDD_SHIFT						2
 #define OMAP4430_INITVDD_MASK						(1 << 2)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVOLTAGE_SHIFT					8
 #define OMAP4430_INITVOLTAGE_MASK					(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_INTRANSITION_SHIFT					20
-#define OMAP4430_INTRANSITION_MASK					(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_IO_EN_SHIFT						9
-#define OMAP4430_IO_EN_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_IO_ON_STATUS_SHIFT					5
-#define OMAP4430_IO_ON_STATUS_MASK					(1 << 5)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_IO_ST_SHIFT						9
-#define OMAP4430_IO_ST_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					0
-#define OMAP4430_ISOCLK_OVERRIDE_MASK					(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_STATUS_SHIFT					1
-#define OMAP4430_ISOCLK_STATUS_MASK					(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOOVR_EXTEND_SHIFT					4
-#define OMAP4430_ISOOVR_EXTEND_MASK					(1 << 4)
-
-/* Used by PRM_IO_COUNT */
-#define OMAP4430_ISO_2_ON_TIME_SHIFT					0
-#define OMAP4430_ISO_2_ON_TIME_MASK					(0xff << 0)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				16
-#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				8
-#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				4
-#define OMAP4430_L3INIT_BANK1_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CORE_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
 #define OMAP4430_LASTPOWERSTATEENTERED_SHIFT				24
 #define OMAP4430_LASTPOWERSTATEENTERED_MASK				(0x3 << 24)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
 #define OMAP4430_LOGICRETSTATE_SHIFT					2
 #define OMAP4430_LOGICRETSTATE_MASK					(1 << 2)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
 #define OMAP4430_LOGICSTATEST_SHIFT					2
 #define OMAP4430_LOGICSTATEST_MASK					(1 << 2)
-
-/*
- * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
- * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
- * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
- * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WDT3_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, RM_ALWON_SR_CORE_CONTEXT,
- * RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, RM_CAM_FDIF_CONTEXT,
- * RM_CAM_ISS_CONTEXT, RM_CEFUSE_CEFUSE_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_DUCATI_DUCATI_CONTEXT, RM_EMU_DEBUGSS_CONTEXT, RM_GFX_GFX_CONTEXT,
- * RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
- * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
- * RM_L3INSTR_L3_3_CONTEXT, RM_L3INSTR_L3_INSTR_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT,
- * RM_L3_2_OCMC_RAM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT,
- * RM_L4PER_ADC_CONTEXT, RM_L4PER_DMTIMER10_CONTEXT,
- * RM_L4PER_DMTIMER11_CONTEXT, RM_L4PER_DMTIMER2_CONTEXT,
- * RM_L4PER_DMTIMER3_CONTEXT, RM_L4PER_DMTIMER4_CONTEXT,
- * RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
- * RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, RM_L4PER_I2C2_CONTEXT,
- * RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, RM_L4PER_I2C5_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, RM_L4PER_MCASP3_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, RM_L4PER_MCSPI2_CONTEXT,
- * RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, RM_L4PER_MGATE_CONTEXT,
- * RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, RM_L4PER_MMCSD5_CONTEXT,
- * RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT,
- * RM_L4SEC_PKAEIP29_CONTEXT, RM_MEMIF_DLL_CONTEXT, RM_MEMIF_DLL_H_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MPU_MPU_CONTEXT, RM_TESLA_TESLA_CONTEXT,
- * RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, RM_WKUP_L4WKUP_CONTEXT,
- * RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, RM_WKUP_SYNCTIMER_CONTEXT,
- * RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, RM_WKUP_USIM_CONTEXT,
- * RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					0
 #define OMAP4430_LOSTCONTEXT_DFF_MASK					(1 << 0)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DSS_CONTEXT, RM_DUCATI_DUCATI_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_USB_HOST_CONTEXT,
- * RM_L3INIT_USB_HOST_FS_CONTEXT, RM_L3INIT_USB_OTG_CONTEXT,
- * RM_L3INIT_USB_TLL_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
- * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
- * RM_L4CFG_MAILBOX_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
- * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
- * RM_L4PER_I2C1_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT,
- * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
- * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_TESLA_TESLA_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					1
-#define OMAP4430_LOSTCONTEXT_RFF_MASK					(1 << 1)
-
-/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					8
 #define OMAP4430_LOSTMEM_AESSMEM_MASK					(1 << 8)
-
-/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_CAM_MEM_MASK					(1 << 8)
-
-/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				(1 << 8)
-
-/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			9
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			(1 << 9)
-
-/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				(1 << 8)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
- * RM_SDMA_SDMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				(1 << 8)
-
-/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_DSS_MEM_MASK					(1 << 8)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				9
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				(1 << 9)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				8
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				(1 << 8)
-
-/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					8
-#define OMAP4430_LOSTMEM_EMU_BANK_MASK					(1 << 8)
-
-/* Used by RM_GFX_GFX_CONTEXT */
-#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_GFX_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					10
-#define OMAP4430_LOSTMEM_HWA_MEM_MASK					(1 << 10)
-
-/*
- * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT,
- * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
- */
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				8
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_MPU_L1_MASK					(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_MPU_L2_MASK					(1 << 9)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					10
-#define OMAP4430_LOSTMEM_MPU_RAM_MASK					(1 << 10)
-
-/*
- * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
- * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
- */
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				(1 << 8)
-
-/*
- * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
- * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
- */
-#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				8
-#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					(1 << 8)
-
-/*
- * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_CRYPTODMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				(1 << 8)
-
-/* Used by RM_IVAHD_SL2_CONTEXT */
-#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_SL2_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					9
-#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					(1 << 9)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				10
-#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				(1 << 10)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_TESLA_L1_MASK					(1 << 8)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_TESLA_L2_MASK					(1 << 9)
-
-/* Used by RM_WKUP_SARRAM_CONTEXT */
-#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					(1 << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_IVAHD_PWRSTCTRL,
- * PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
 #define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				4
 #define OMAP4430_LOWPOWERSTATECHANGE_MASK				(1 << 4)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_READY_SHIFT					1
-#define OMAP4430_MODEM_READY_MASK					(1 << 1)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				9
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				(1 << 9)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SLEEP_ST_SHIFT					16
-#define OMAP4430_MODEM_SLEEP_ST_MASK					(1 << 16)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					8
-#define OMAP4430_MODEM_WAKE_IRQ_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_ONSTATE_SHIFT					16
-#define OMAP4430_MPU_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_RETSTATE_SHIFT					8
-#define OMAP4430_MPU_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L1_STATEST_SHIFT					4
-#define OMAP4430_MPU_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_ONSTATE_SHIFT					18
-#define OMAP4430_MPU_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_RETSTATE_SHIFT					9
-#define OMAP4430_MPU_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L2_STATEST_SHIFT					6
-#define OMAP4430_MPU_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					20
-#define OMAP4430_MPU_RAM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					10
-#define OMAP4430_MPU_RAM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_RAM_STATEST_SHIFT					8
-#define OMAP4430_MPU_RAM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				2
-#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				(1 << 2)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_MPU_WDT_RST_SHIFT					3
-#define OMAP4430_MPU_WDT_RST_MASK					(1 << 3)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				18
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			9
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				6
-#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				24
 #define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				(0x3 << 24)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				(1 << 12)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_STATEST_MASK				(0x3 << 12)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_OFF_SHIFT						0
-#define OMAP4430_OFF_MASK						(0xff << 0)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_ON_SHIFT						24
 #define OMAP4430_ON_MASK						(0xff << 24)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_ONLP_SHIFT						16
-#define OMAP4430_ONLP_MASK						(0xff << 16)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_CHANGE_SHIFT					2
-#define OMAP4430_OPP_CHANGE_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_SEL_SHIFT						0
-#define OMAP4430_OPP_SEL_MASK						(0x3 << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_PCHARGECNT_VALUE_SHIFT					0
-#define OMAP4430_PCHARGECNT_VALUE_MASK					(0x3f << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PCHARGE_TIME_SHIFT					0
-#define OMAP4430_PCHARGE_TIME_MASK					(0xff << 0)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				20
-#define OMAP4430_PERIPHMEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				10
-#define OMAP4430_PERIPHMEM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_PERIPHMEM_STATEST_SHIFT				8
-#define OMAP4430_PERIPHMEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_PHASE1_CNDP */
-#define OMAP4430_PHASE1_CNDP_SHIFT					0
-#define OMAP4430_PHASE1_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2A_CNDP */
-#define OMAP4430_PHASE2A_CNDP_SHIFT					0
-#define OMAP4430_PHASE2A_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2B_CNDP */
-#define OMAP4430_PHASE2B_CNDP_SHIFT					0
-#define OMAP4430_PHASE2B_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				8
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_EMU_PWRSTCTRL, PM_GFX_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
-#define OMAP4430_POWERSTATE_SHIFT					0
-#define OMAP4430_POWERSTATE_MASK					(0x3 << 0)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_POWERSTATEST_SHIFT					0
-#define OMAP4430_POWERSTATEST_MASK					(0x3 << 0)
-
-/* Used by PRM_PWRREQCTRL */
-#define OMAP4430_PWRREQ_COND_SHIFT					0
-#define OMAP4430_PWRREQ_COND_MASK					(0x3 << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					3
-#define OMAP4430_RACEN_VDD_CORE_L_MASK					(1 << 3)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					11
-#define OMAP4430_RACEN_VDD_IVA_L_MASK					(1 << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					20
-#define OMAP4430_RACEN_VDD_MPU_L_MASK					(1 << 20)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_CORE_L_SHIFT					2
-#define OMAP4430_RAC_VDD_CORE_L_MASK					(1 << 2)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_IVA_L_SHIFT					10
-#define OMAP4430_RAC_VDD_IVA_L_MASK					(1 << 10)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_MPU_L_SHIFT					19
-#define OMAP4430_RAC_VDD_MPU_L_MASK					(1 << 19)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_DOWN_COUNT_SHIFT					16
-#define OMAP4430_RAMP_DOWN_COUNT_MASK					(0x3f << 16)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				24
-#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					(0x3 << 24)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_UP_COUNT_SHIFT					0
-#define OMAP4430_RAMP_UP_COUNT_MASK					(0x3f << 0)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_UP_PRESCAL_SHIFT					8
-#define OMAP4430_RAMP_UP_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_CORE_L_SHIFT					1
-#define OMAP4430_RAV_VDD_CORE_L_MASK					(1 << 1)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_IVA_L_SHIFT					9
-#define OMAP4430_RAV_VDD_IVA_L_MASK					(1 << 9)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_MPU_L_SHIFT					18
-#define OMAP4430_RAV_VDD_MPU_L_MASK					(1 << 18)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_REGADDR_SHIFT						8
-#define OMAP4430_REGADDR_MASK						(0xff << 8)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_RET_SHIFT						8
-#define OMAP4430_RET_MASK						(0xff << 8)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				4
-#define OMAP4430_RETAINED_BANK_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_RETMODE_ENABLE_SHIFT					0
-#define OMAP4430_RETMODE_ENABLE_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST1_SHIFT						0
-#define OMAP4430_RST1_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST1ST_SHIFT						0
-#define OMAP4430_RST1ST_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST2_SHIFT						1
-#define OMAP4430_RST2_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST2ST_SHIFT						1
-#define OMAP4430_RST2ST_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST3_SHIFT						2
-#define OMAP4430_RST3_MASK						(1 << 2)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST3ST_SHIFT						2
-#define OMAP4430_RST3ST_MASK						(1 << 2)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME1_SHIFT						0
-#define OMAP4430_RSTTIME1_MASK						(0x3ff << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME2_SHIFT						10
-#define OMAP4430_RSTTIME2_MASK						(0x1f << 10)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				1
-#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				0
 #define OMAP4430_RST_GLOBAL_WARM_SW_MASK				(1 << 0)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_R_RTL_SHIFT						11
-#define OMAP4430_R_RTL_MASK						(0x1f << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_SA_VDD_CORE_L_MASK					(1 << 0)
-
-/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				0
 #define OMAP4430_SA_VDD_CORE_L_0_6_MASK					(0x7f << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_SA_VDD_IVA_L_MASK					(1 << 8)
-
-/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			8
 #define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			(0x7f << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_SA_VDD_MPU_L_MASK					(1 << 16)
-
-/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			16
 #define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			(0x7f << 16)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_SCHEME_SHIFT						30
-#define OMAP4430_SCHEME_MASK						(0x3 << 30)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLH_SHIFT						0
-#define OMAP4430_SCLH_MASK						(0xff << 0)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLL_SHIFT						8
-#define OMAP4430_SCLL_MASK						(0xff << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_SECURE_WDT_RST_SHIFT					4
-#define OMAP4430_SECURE_WDT_RST_MASK					(1 << 4)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					18
-#define OMAP4430_SL2_MEM_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					9
-#define OMAP4430_SL2_MEM_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_SL2_MEM_STATEST_SHIFT					6
-#define OMAP4430_SL2_MEM_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_SLAVEADDR_SHIFT					0
-#define OMAP4430_SLAVEADDR_MASK						(0x7f << 0)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SLEEP_RBB_SEL_SHIFT					3
-#define OMAP4430_SLEEP_RBB_SEL_MASK					(1 << 3)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_SLPCNT_VALUE_SHIFT					16
-#define OMAP4430_SLPCNT_VALUE_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_SMPSWAITTIMEMAX_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMAX_MASK					(0xffff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_SMPSWAITTIMEMIN_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMIN_MASK					(0xffff << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_CORE_SHIFT					1
-#define OMAP4430_SMPS_RA_ERR_CORE_MASK					(1 << 1)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_IVA_SHIFT					9
-#define OMAP4430_SMPS_RA_ERR_IVA_MASK					(1 << 9)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_MPU_SHIFT					17
-#define OMAP4430_SMPS_RA_ERR_MPU_MASK					(1 << 17)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_CORE_SHIFT					0
-#define OMAP4430_SMPS_SA_ERR_CORE_MASK					(1 << 0)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_IVA_SHIFT					8
-#define OMAP4430_SMPS_SA_ERR_IVA_MASK					(1 << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_MPU_SHIFT					16
-#define OMAP4430_SMPS_SA_ERR_MPU_MASK					(1 << 16)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_SHIFT				2
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_MASK				(1 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_SHIFT				10
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_MASK				(1 << 10)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_SHIFT				18
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_MASK				(1 << 18)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2EN_SHIFT						0
-#define OMAP4430_SR2EN_MASK						(1 << 0)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_IN_TRANSITION_SHIFT				6
-#define OMAP4430_SR2_IN_TRANSITION_MASK					(1 << 6)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_STATUS_SHIFT					3
-#define OMAP4430_SR2_STATUS_MASK					(0x3 << 3)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					8
-#define OMAP4430_SR2_WTCNT_VALUE_MASK					(0xff << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAMLDO_STATUS_SHIFT					8
-#define OMAP4430_SRAMLDO_STATUS_MASK					(1 << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				9
-#define OMAP4430_SRAM_IN_TRANSITION_MASK				(1 << 9)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_SRMODEEN_SHIFT						4
-#define OMAP4430_SRMODEEN_MASK						(1 << 4)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_COUNT_SHIFT					0
-#define OMAP4430_STABLE_COUNT_MASK					(0x3f << 0)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_PRESCAL_SHIFT					8
-#define OMAP4430_STABLE_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_LDO_BANDGAP_SETUP */
-#define OMAP4430_STARTUP_COUNT_SHIFT					0
-#define OMAP4430_STARTUP_COUNT_MASK					(0xff << 0)
-
-/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
-#define OMAP4430_STARTUP_COUNT_24_31_SHIFT				24
-#define OMAP4430_STARTUP_COUNT_24_31_MASK				(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					20
-#define OMAP4430_TCM1_MEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				10
-#define OMAP4430_TCM1_MEM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM1_MEM_STATEST_SHIFT					8
-#define OMAP4430_TCM1_MEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					22
-#define OMAP4430_TCM2_MEM_ONSTATE_MASK					(0x3 << 22)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				11
-#define OMAP4430_TCM2_MEM_RETSTATE_MASK					(1 << 11)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM2_MEM_STATEST_SHIFT					10
-#define OMAP4430_TCM2_MEM_STATEST_MASK					(0x3 << 10)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				2
-#define OMAP4430_TESLASS_EMU_RSTST_MASK					(1 << 2)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				3
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				(1 << 3)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				20
-#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				10
-#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				8
-#define OMAP4430_TESLA_EDMA_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					16
-#define OMAP4430_TESLA_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				8
-#define OMAP4430_TESLA_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L1_STATEST_SHIFT					4
-#define OMAP4430_TESLA_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					18
-#define OMAP4430_TESLA_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				9
-#define OMAP4430_TESLA_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L2_STATEST_SHIFT					6
-#define OMAP4430_TESLA_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_TIMEOUT_SHIFT						0
-#define OMAP4430_TIMEOUT_MASK						(0xffff << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_TIMEOUTEN_SHIFT					3
 #define OMAP4430_TIMEOUTEN_MASK						(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_TRANSITION_EN_SHIFT					8
-#define OMAP4430_TRANSITION_EN_MASK					(1 << 8)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_TRANSITION_ST_SHIFT					8
-#define OMAP4430_TRANSITION_ST_MASK					(1 << 8)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_VALID_SHIFT						24
 #define OMAP4430_VALID_MASK						(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_BYPASSACK_EN_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_EN_MASK					(1 << 14)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_BYPASSACK_ST_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_ST_MASK					(1 << 14)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_CORE_VPACK_EN_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_EN_MASK					(1 << 22)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_CORE_VPACK_ST_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_ST_MASK					(1 << 22)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_EN_MASK					(1 << 30)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_ST_MASK					(1 << 30)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_EN_MASK					(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_ST_MASK					(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_RAERR_EN_SHIFT					12
-#define OMAP4430_VC_RAERR_EN_MASK					(1 << 12)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_RAERR_ST_SHIFT					12
-#define OMAP4430_VC_RAERR_ST_MASK					(1 << 12)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_SAERR_EN_SHIFT					11
-#define OMAP4430_VC_SAERR_EN_MASK					(1 << 11)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_SAERR_ST_SHIFT					11
-#define OMAP4430_VC_SAERR_ST_MASK					(1 << 11)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_TOERR_EN_SHIFT					13
-#define OMAP4430_VC_TOERR_EN_MASK					(1 << 13)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_TOERR_ST_SHIFT					13
-#define OMAP4430_VC_TOERR_ST_MASK					(1 << 13)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMAX_SHIFT						24
-#define OMAP4430_VDDMAX_MASK						(0xff << 24)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMIN_SHIFT						16
-#define OMAP4430_VDDMIN_MASK						(0xff << 16)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				12
-#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				(1 << 12)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				8
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				14
-#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				(1 << 14)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					9
-#define OMAP4430_VDD_IVA_PRESENCE_MASK					(1 << 9)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				7
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				(1 << 7)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				13
-#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				(1 << 13)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					8
-#define OMAP4430_VDD_MPU_PRESENCE_MASK					(1 << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				6
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				(1 << 6)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_CORE_SHIFT					4
-#define OMAP4430_VFSM_RA_ERR_CORE_MASK					(1 << 4)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_IVA_SHIFT					12
-#define OMAP4430_VFSM_RA_ERR_IVA_MASK					(1 << 12)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_MPU_SHIFT					20
-#define OMAP4430_VFSM_RA_ERR_MPU_MASK					(1 << 20)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_CORE_SHIFT					3
-#define OMAP4430_VFSM_SA_ERR_CORE_MASK					(1 << 3)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_IVA_SHIFT					11
-#define OMAP4430_VFSM_SA_ERR_IVA_MASK					(1 << 11)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_MPU_SHIFT					19
-#define OMAP4430_VFSM_SA_ERR_MPU_MASK					(1 << 19)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_SHIFT				5
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_MASK				(1 << 5)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_SHIFT				13
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_MASK				(1 << 13)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_SHIFT				21
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_MASK				(1 << 21)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_VOLRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_VOLRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_VOLRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_VPENABLE_SHIFT						0
 #define OMAP4430_VPENABLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP4430_VPINIDLE_SHIFT						0
-#define OMAP4430_VPINIDLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_VPVOLTAGE_SHIFT					0
 #define OMAP4430_VPVOLTAGE_MASK						(0xff << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				(1 << 20)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					(1 << 18)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					(1 << 18)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_EN_MASK					(1 << 17)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_ST_MASK					(1 << 17)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				(1 << 19)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				(1 << 19)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				(1 << 16)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				(1 << 16)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				(1 << 21)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				21
 #define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				(1 << 21)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					(1 << 28)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					(1 << 28)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					(1 << 26)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					(1 << 26)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_EN_MASK					(1 << 25)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_ST_MASK					(1 << 25)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				(1 << 27)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				(1 << 27)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				(1 << 24)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				(1 << 29)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				29
 #define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				(1 << 29)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				(1 << 3)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				(1 << 3)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				(1 << 5)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				5
 #define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				(1 << 5)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_VSETUPCNT_VALUE_SHIFT					8
-#define OMAP4430_VSETUPCNT_VALUE_MASK					(0xff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_VSTEPMAX_SHIFT						0
-#define OMAP4430_VSTEPMAX_MASK						(0xff << 0)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_VSTEPMIN_SHIFT						0
-#define OMAP4430_VSTEPMIN_MASK						(0xff << 0)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_WAKE_MODEM_SHIFT					0
-#define OMAP4430_WAKE_MODEM_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				(1 << 3)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_DMTIMER10_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER2_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				5
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				(1 << 5)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					4
-#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					(1 << 4)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					(1 << 7)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				9
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				(1 << 9)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					8
-#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					(1 << 8)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				11
-#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					(1 << 11)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				10
-#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				(1 << 10)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				19
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				(1 << 19)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				13
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				(1 << 13)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				12
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				(1 << 12)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				14
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				(1 << 14)
-
-/* Used by PM_L4PER_HECC1_WKDEP */
-#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_HECC2_WKDEP */
-#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_KEYBOARD_WKDEP */
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_WKUP_RTC_WKDEP */
-#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_RTC_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_SATA_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_MPU_WKDEP */
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER12_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER1_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART4_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_USIM_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					(1 << 3)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_WDT3_WKDEP */
-#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				8
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_XHPI_WKDEP */
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_CTRL_SHIFT					8
 #define OMAP4430_WUCLK_CTRL_MASK					(1 << 8)
-
-/* Used by PRM_IO_PMCTRL */
 #define OMAP4430_WUCLK_STATUS_SHIFT					9
 #define OMAP4430_WUCLK_STATUS_MASK					(1 << 9)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_X_MAJOR_SHIFT						8
-#define OMAP4430_X_MAJOR_MASK						(0x7 << 8)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_Y_MINOR_SHIFT						0
-#define OMAP4430_Y_MINOR_MASK						(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-54xx.h b/arch/arm/mach-omap2/prm-regbits-54xx.h
deleted file mode 100644
index be31b21aa9c6..000000000000
--- a/arch/arm/mach-omap2/prm-regbits-54xx.h
+++ /dev/null
@@ -1,2701 +0,0 @@
-/*
- * OMAP54xx Power Management register bits
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ABBOFF_ACT_SHIFT						1
-#define OMAP54XX_ABBOFF_ACT_WIDTH						0x1
-#define OMAP54XX_ABBOFF_ACT_MASK						(1 << 1)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ABBOFF_SLEEP_SHIFT						2
-#define OMAP54XX_ABBOFF_SLEEP_WIDTH						0x1
-#define OMAP54XX_ABBOFF_SLEEP_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_ABB_MM_DONE_EN_SHIFT						31
-#define OMAP54XX_ABB_MM_DONE_EN_WIDTH						0x1
-#define OMAP54XX_ABB_MM_DONE_EN_MASK						(1 << 31)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_ABB_MM_DONE_ST_SHIFT						31
-#define OMAP54XX_ABB_MM_DONE_ST_WIDTH						0x1
-#define OMAP54XX_ABB_MM_DONE_ST_MASK						(1 << 31)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_ABB_MPU_DONE_EN_SHIFT						7
-#define OMAP54XX_ABB_MPU_DONE_EN_WIDTH						0x1
-#define OMAP54XX_ABB_MPU_DONE_EN_MASK						(1 << 7)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_ABB_MPU_DONE_ST_SHIFT						7
-#define OMAP54XX_ABB_MPU_DONE_ST_WIDTH						0x1
-#define OMAP54XX_ABB_MPU_DONE_ST_MASK						(1 << 7)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_ACTIVE_FBB_SEL_SHIFT						2
-#define OMAP54XX_ACTIVE_FBB_SEL_WIDTH						0x1
-#define OMAP54XX_ACTIVE_FBB_SEL_MASK						(1 << 2)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_AESSMEM_ONSTATE_SHIFT						16
-#define OMAP54XX_AESSMEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_AESSMEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_AESSMEM_RETSTATE_SHIFT						8
-#define OMAP54XX_AESSMEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_AESSMEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP54XX_AESSMEM_STATEST_SHIFT						4
-#define OMAP54XX_AESSMEM_STATEST_WIDTH						0x2
-#define OMAP54XX_AESSMEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_AIPOFF_SHIFT							8
-#define OMAP54XX_AIPOFF_WIDTH							0x1
-#define OMAP54XX_AIPOFF_MASK							(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_SHIFT					0
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_MASK					(0x3 << 0)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_SHIFT					4
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_MASK					(0x3 << 4)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_SHIFT					2
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_MASK					(0x3 << 2)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_RA_ERR_SHIFT						1
-#define OMAP54XX_BYPS_RA_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_RA_ERR_MASK						(1 << 1)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_SA_ERR_SHIFT						0
-#define OMAP54XX_BYPS_SA_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_SA_ERR_MASK						(1 << 0)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_TIMEOUT_ERR_SHIFT						2
-#define OMAP54XX_BYPS_TIMEOUT_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_TIMEOUT_ERR_MASK						(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_C2C_RST_SHIFT							10
-#define OMAP54XX_C2C_RST_WIDTH							0x1
-#define OMAP54XX_C2C_RST_MASK							(1 << 10)
-
-/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP54XX_CAM_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_CAM_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_CAM_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_CAM_PWRSTST */
-#define OMAP54XX_CAM_MEM_STATEST_SHIFT						4
-#define OMAP54XX_CAM_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_CAM_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_CLKREQCTRL */
-#define OMAP54XX_CLKREQ_COND_SHIFT						0
-#define OMAP54XX_CLKREQ_COND_WIDTH						0x3
-#define OMAP54XX_CLKREQ_COND_MASK						(0x7 << 0)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_CMDRA_VDD_CORE_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_CORE_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_CORE_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_CMDRA_VDD_MM_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_MM_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_MM_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_CMDRA_VDD_MPU_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_MPU_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_MPU_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_CMD_VDD_CORE_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_CORE_L_MASK						(1 << 28)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_CMD_VDD_MM_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_MM_L_MASK						(1 << 28)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_CMD_VDD_MPU_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_MPU_L_MASK						(1 << 28)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_SHIFT					18
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_SHIFT					9
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_CORE_OCMRAM_STATEST_SHIFT					6
-#define OMAP54XX_CORE_OCMRAM_STATEST_WIDTH					0x2
-#define OMAP54XX_CORE_OCMRAM_STATEST_MASK					(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_SHIFT					16
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_WIDTH					0x2
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_SHIFT					8
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_WIDTH					0x1
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_SHIFT					4
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_WIDTH					0x2
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_MASK					(0x3 << 4)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_CUSTOM_SHIFT							6
-#define OMAP54XX_CUSTOM_WIDTH							0x2
-#define OMAP54XX_CUSTOM_MASK							(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_DATA_SHIFT							16
-#define OMAP54XX_DATA_WIDTH							0x8
-#define OMAP54XX_DATA_MASK							(0xff << 16)
-
-/* Used by PRM_DEBUG_CORE_RET_TRANS */
-#define OMAP54XX_PRM_DEBUG_OUT_SHIFT						0
-#define OMAP54XX_PRM_DEBUG_OUT_WIDTH						0x1c
-#define OMAP54XX_PRM_DEBUG_OUT_MASK						(0xfffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MM_RET_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_9_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_9_WIDTH						0xa
-#define OMAP54XX_DEBUG_OUT_0_9_MASK						(0x3ff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MPU_RET_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_6_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_6_WIDTH						0x7
-#define OMAP54XX_DEBUG_OUT_0_6_MASK						(0x7f << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_OFF_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_31_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_31_WIDTH						0x20
-#define OMAP54XX_DEBUG_OUT_0_31_MASK						(0xffffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_WKUPAON_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_11_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_11_WIDTH						0xc
-#define OMAP54XX_DEBUG_OUT_0_11_MASK						(0xfff << 0)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_DEVICE_OFF_ENABLE_SHIFT					0
-#define OMAP54XX_DEVICE_OFF_ENABLE_WIDTH					0x1
-#define OMAP54XX_DEVICE_OFF_ENABLE_MASK						(1 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_DFILTEREN_SHIFT						6
-#define OMAP54XX_DFILTEREN_WIDTH						0x1
-#define OMAP54XX_DFILTEREN_MASK							(1 << 6)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_ABE_RECAL_EN_SHIFT					4
-#define OMAP54XX_DPLL_ABE_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_ABE_RECAL_EN_MASK						(1 << 4)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_ABE_RECAL_ST_SHIFT					4
-#define OMAP54XX_DPLL_ABE_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_ABE_RECAL_ST_MASK						(1 << 4)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_CORE_RECAL_EN_SHIFT					0
-#define OMAP54XX_DPLL_CORE_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_CORE_RECAL_EN_MASK					(1 << 0)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_CORE_RECAL_ST_SHIFT					0
-#define OMAP54XX_DPLL_CORE_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_CORE_RECAL_ST_MASK					(1 << 0)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_IVA_RECAL_EN_SHIFT					2
-#define OMAP54XX_DPLL_IVA_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_IVA_RECAL_EN_MASK						(1 << 2)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_IVA_RECAL_ST_SHIFT					2
-#define OMAP54XX_DPLL_IVA_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_IVA_RECAL_ST_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_MPU_RECAL_EN_SHIFT					1
-#define OMAP54XX_DPLL_MPU_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_MPU_RECAL_EN_MASK						(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_MPU_RECAL_ST_SHIFT					1
-#define OMAP54XX_DPLL_MPU_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_MPU_RECAL_ST_MASK						(1 << 1)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_PER_RECAL_EN_SHIFT					3
-#define OMAP54XX_DPLL_PER_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_PER_RECAL_EN_MASK						(1 << 3)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_PER_RECAL_ST_SHIFT					3
-#define OMAP54XX_DPLL_PER_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_PER_RECAL_ST_MASK						(1 << 3)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_EDMA_ONSTATE_SHIFT						20
-#define OMAP54XX_DSP_EDMA_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_EDMA_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_EDMA_RETSTATE_SHIFT					10
-#define OMAP54XX_DSP_EDMA_RETSTATE_WIDTH					0x1
-#define OMAP54XX_DSP_EDMA_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_EDMA_STATEST_SHIFT						8
-#define OMAP54XX_DSP_EDMA_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_EDMA_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L1_ONSTATE_SHIFT						16
-#define OMAP54XX_DSP_L1_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_L1_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L1_RETSTATE_SHIFT						8
-#define OMAP54XX_DSP_L1_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSP_L1_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_L1_STATEST_SHIFT						4
-#define OMAP54XX_DSP_L1_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_L1_STATEST_MASK						(0x3 << 4)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L2_ONSTATE_SHIFT						18
-#define OMAP54XX_DSP_L2_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_L2_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L2_RETSTATE_SHIFT						9
-#define OMAP54XX_DSP_L2_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSP_L2_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_L2_STATEST_SHIFT						6
-#define OMAP54XX_DSP_L2_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_L2_STATEST_MASK						(0x3 << 6)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP54XX_DSS_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_DSS_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSS_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP54XX_DSS_MEM_RETSTATE_SHIFT						8
-#define OMAP54XX_DSS_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSS_MEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_DSS_PWRSTST */
-#define OMAP54XX_DSS_MEM_STATEST_SHIFT						4
-#define OMAP54XX_DSS_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_DSS_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_SHIFT					8
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_WIDTH					0x1
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_MASK					(1 << 8)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_SHIFT					9
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_WIDTH					0x1
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_MASK					(1 << 9)
-
-/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP54XX_EMU_BANK_ONSTATE_SHIFT						16
-#define OMAP54XX_EMU_BANK_ONSTATE_WIDTH						0x2
-#define OMAP54XX_EMU_BANK_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_EMU_PWRSTST */
-#define OMAP54XX_EMU_BANK_STATEST_SHIFT						4
-#define OMAP54XX_EMU_BANK_STATEST_WIDTH						0x2
-#define OMAP54XX_EMU_BANK_STATEST_MASK						(0x3 << 4)
-
-/*
- * Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP,
- * PRM_SRAM_WKUP_SETUP
- */
-#define OMAP54XX_ENABLE_RTA_SHIFT						0
-#define OMAP54XX_ENABLE_RTA_WIDTH						0x1
-#define OMAP54XX_ENABLE_RTA_MASK						(1 << 0)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC1_SHIFT							3
-#define OMAP54XX_ENFUNC1_WIDTH							0x1
-#define OMAP54XX_ENFUNC1_MASK							(1 << 3)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC2_SHIFT							4
-#define OMAP54XX_ENFUNC2_WIDTH							0x1
-#define OMAP54XX_ENFUNC2_MASK							(1 << 4)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC3_SHIFT							5
-#define OMAP54XX_ENFUNC3_WIDTH							0x1
-#define OMAP54XX_ENFUNC3_MASK							(1 << 5)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC4_SHIFT							6
-#define OMAP54XX_ENFUNC4_WIDTH							0x1
-#define OMAP54XX_ENFUNC4_MASK							(1 << 6)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC5_SHIFT							7
-#define OMAP54XX_ENFUNC5_WIDTH							0x1
-#define OMAP54XX_ENFUNC5_MASK							(1 << 7)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_ERRORGAIN_SHIFT						16
-#define OMAP54XX_ERRORGAIN_WIDTH						0x8
-#define OMAP54XX_ERRORGAIN_MASK							(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_ERROROFFSET_SHIFT						24
-#define OMAP54XX_ERROROFFSET_WIDTH						0x8
-#define OMAP54XX_ERROROFFSET_MASK						(0xff << 24)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_EXTERNAL_WARM_RST_SHIFT					5
-#define OMAP54XX_EXTERNAL_WARM_RST_WIDTH					0x1
-#define OMAP54XX_EXTERNAL_WARM_RST_MASK						(1 << 5)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_FORCEUPDATE_SHIFT						1
-#define OMAP54XX_FORCEUPDATE_WIDTH						0x1
-#define OMAP54XX_FORCEUPDATE_MASK						(1 << 1)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP54XX_FORCEUPDATEWAIT_SHIFT						8
-#define OMAP54XX_FORCEUPDATEWAIT_WIDTH						0x18
-#define OMAP54XX_FORCEUPDATEWAIT_MASK						(0xffffff << 8)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU */
-#define OMAP54XX_FORCEWKUP_EN_SHIFT						10
-#define OMAP54XX_FORCEWKUP_EN_WIDTH						0x1
-#define OMAP54XX_FORCEWKUP_EN_MASK						(1 << 10)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU */
-#define OMAP54XX_FORCEWKUP_ST_SHIFT						10
-#define OMAP54XX_FORCEWKUP_ST_WIDTH						0x1
-#define OMAP54XX_FORCEWKUP_ST_MASK						(1 << 10)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_FUNC_SHIFT							16
-#define OMAP54XX_FUNC_WIDTH							0xc
-#define OMAP54XX_FUNC_MASK							(0xfff << 16)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_GLOBAL_COLD_RST_SHIFT						0
-#define OMAP54XX_GLOBAL_COLD_RST_WIDTH						0x1
-#define OMAP54XX_GLOBAL_COLD_RST_MASK						(1 << 0)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_GLOBAL_WARM_SW_RST_SHIFT					1
-#define OMAP54XX_GLOBAL_WARM_SW_RST_WIDTH					0x1
-#define OMAP54XX_GLOBAL_WARM_SW_RST_MASK					(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_GLOBAL_WUEN_SHIFT						16
-#define OMAP54XX_GLOBAL_WUEN_WIDTH						0x1
-#define OMAP54XX_GLOBAL_WUEN_MASK						(1 << 16)
-
-/* Used by PM_GPU_PWRSTCTRL */
-#define OMAP54XX_GPU_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_GPU_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_GPU_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_GPU_PWRSTST */
-#define OMAP54XX_GPU_MEM_STATEST_SHIFT						4
-#define OMAP54XX_GPU_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_GPU_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_HSMCODE_SHIFT							0
-#define OMAP54XX_HSMCODE_WIDTH							0x3
-#define OMAP54XX_HSMCODE_MASK							(0x7 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_HSMODEEN_SHIFT							3
-#define OMAP54XX_HSMODEEN_WIDTH							0x1
-#define OMAP54XX_HSMODEEN_MASK							(1 << 3)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_HSSCLH_SHIFT							16
-#define OMAP54XX_HSSCLH_WIDTH							0x8
-#define OMAP54XX_HSSCLH_MASK							(0xff << 16)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_HSSCLL_SHIFT							24
-#define OMAP54XX_HSSCLL_WIDTH							0x8
-#define OMAP54XX_HSSCLL_MASK							(0xff << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_HWA_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_HWA_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_HWA_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_HWA_MEM_RETSTATE_SHIFT						8
-#define OMAP54XX_HWA_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_HWA_MEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_HWA_MEM_STATEST_SHIFT						4
-#define OMAP54XX_HWA_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_HWA_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_ICEPICK_RST_SHIFT						9
-#define OMAP54XX_ICEPICK_RST_WIDTH						0x1
-#define OMAP54XX_ICEPICK_RST_MASK						(1 << 9)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_INITVDD_SHIFT							2
-#define OMAP54XX_INITVDD_WIDTH							0x1
-#define OMAP54XX_INITVDD_MASK							(1 << 2)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_INITVOLTAGE_SHIFT						8
-#define OMAP54XX_INITVOLTAGE_WIDTH						0x8
-#define OMAP54XX_INITVOLTAGE_MASK						(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST,
- * PRM_VOLTST_MM, PRM_VOLTST_MPU
- */
-#define OMAP54XX_INTRANSITION_SHIFT						20
-#define OMAP54XX_INTRANSITION_WIDTH						0x1
-#define OMAP54XX_INTRANSITION_MASK						(1 << 20)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_IO_EN_SHIFT							9
-#define OMAP54XX_IO_EN_WIDTH							0x1
-#define OMAP54XX_IO_EN_MASK							(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_IO_ON_STATUS_SHIFT						5
-#define OMAP54XX_IO_ON_STATUS_WIDTH						0x1
-#define OMAP54XX_IO_ON_STATUS_MASK						(1 << 5)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_IO_ST_SHIFT							9
-#define OMAP54XX_IO_ST_WIDTH							0x1
-#define OMAP54XX_IO_ST_MASK							(1 << 9)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_L2RAM_ONSTATE_SHIFT					20
-#define OMAP54XX_IPU_L2RAM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_IPU_L2RAM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_L2RAM_RETSTATE_SHIFT					10
-#define OMAP54XX_IPU_L2RAM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_IPU_L2RAM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_IPU_L2RAM_STATEST_SHIFT					8
-#define OMAP54XX_IPU_L2RAM_STATEST_WIDTH					0x2
-#define OMAP54XX_IPU_L2RAM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_SHIFT					22
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_WIDTH					0x2
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_MASK					(0x3 << 22)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_SHIFT					11
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_WIDTH					0x1
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_MASK					(1 << 11)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_IPU_UNICACHE_STATEST_SHIFT					10
-#define OMAP54XX_IPU_UNICACHE_STATEST_WIDTH					0x2
-#define OMAP54XX_IPU_UNICACHE_STATEST_MASK					(0x3 << 10)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOCLK_OVERRIDE_SHIFT						0
-#define OMAP54XX_ISOCLK_OVERRIDE_WIDTH						0x1
-#define OMAP54XX_ISOCLK_OVERRIDE_MASK						(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOCLK_STATUS_SHIFT						1
-#define OMAP54XX_ISOCLK_STATUS_WIDTH						0x1
-#define OMAP54XX_ISOCLK_STATUS_MASK						(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOOVR_EXTEND_SHIFT						4
-#define OMAP54XX_ISOOVR_EXTEND_WIDTH						0x1
-#define OMAP54XX_ISOOVR_EXTEND_MASK						(1 << 4)
-
-/* Used by PRM_IO_COUNT */
-#define OMAP54XX_ISO_2_ON_TIME_SHIFT						0
-#define OMAP54XX_ISO_2_ON_TIME_WIDTH						0x8
-#define OMAP54XX_ISO_2_ON_TIME_MASK						(0xff << 0)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_SHIFT					16
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_SHIFT					8
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_WIDTH					0x1
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP54XX_L3INIT_BANK1_STATEST_SHIFT					4
-#define OMAP54XX_L3INIT_BANK1_STATEST_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_SHIFT					18
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_SHIFT					9
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_WIDTH					0x1
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP54XX_L3INIT_BANK2_STATEST_SHIFT					6
-#define OMAP54XX_L3INIT_BANK2_STATEST_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK2_STATEST_MASK					(0x3 << 6)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_LASTPOWERSTATEENTERED_SHIFT					24
-#define OMAP54XX_LASTPOWERSTATEENTERED_WIDTH					0x2
-#define OMAP54XX_LASTPOWERSTATEENTERED_MASK					(0x3 << 24)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_LLI_RST_SHIFT							14
-#define OMAP54XX_LLI_RST_WIDTH							0x1
-#define OMAP54XX_LLI_RST_MASK							(1 << 14)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSP_PWRSTCTRL,
- * PM_DSS_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_LOGICRETSTATE_SHIFT						2
-#define OMAP54XX_LOGICRETSTATE_WIDTH						0x1
-#define OMAP54XX_LOGICRETSTATE_MASK						(1 << 2)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_LOGICSTATEST_SHIFT						2
-#define OMAP54XX_LOGICSTATEST_WIDTH						0x1
-#define OMAP54XX_LOGICSTATEST_MASK						(1 << 2)
-
-/*
- * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
- * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
- * RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT, RM_ABE_TIMER5_CONTEXT,
- * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WD_TIMER3_CONTEXT, RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT,
- * RM_CAM_CAL_CONTEXT, RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT,
- * RM_COREAON_SMARTREFLEX_CORE_CONTEXT, RM_COREAON_SMARTREFLEX_MM_CONTEXT,
- * RM_COREAON_SMARTREFLEX_MPU_CONTEXT, RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT,
- * RM_DSP_DSP_CONTEXT, RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT, RM_EMIF_EMIF2_CONTEXT,
- * RM_EMIF_EMIF_DLL_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT,
- * RM_EMU_DEBUGSS_CONTEXT, RM_GPU_GPU_CONTEXT, RM_IPU_IPU_CONTEXT,
- * RM_IVA_IVA_CONTEXT, RM_IVA_SL2_CONTEXT, RM_L3INIT_IEEE1500_2_OCP_CONTEXT,
- * RM_L3INIT_OCP2SCP1_CONTEXT, RM_L3INIT_OCP2SCP3_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT,
- * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT,
- * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT,
- * RM_L3MAIN2_L3_MAIN_2_CONTEXT, RM_L3MAIN2_OCMC_RAM_CONTEXT,
- * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_OCP2SCP2_CONTEXT,
- * RM_L4CFG_SAR_ROM_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
- * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT,
- * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCSPI1_CONTEXT,
- * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT,
- * RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT,
- * RM_L4PER_TIMER10_CONTEXT, RM_L4PER_TIMER11_CONTEXT, RM_L4PER_TIMER2_CONTEXT,
- * RM_L4PER_TIMER3_CONTEXT, RM_L4PER_TIMER4_CONTEXT, RM_L4PER_TIMER9_CONTEXT,
- * RM_L4SEC_FPKA_CONTEXT, RM_MIPIEXT_LLI_CONTEXT,
- * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT,
- * RM_WKUPAON_COUNTER_32K_CONTEXT, RM_WKUPAON_GPIO1_CONTEXT,
- * RM_WKUPAON_KBD_CONTEXT, RM_WKUPAON_L4_WKUP_CONTEXT,
- * RM_WKUPAON_SAR_RAM_CONTEXT, RM_WKUPAON_TIMER12_CONTEXT,
- * RM_WKUPAON_TIMER1_CONTEXT, RM_WKUPAON_WD_TIMER1_CONTEXT,
- * RM_WKUPAON_WD_TIMER2_CONTEXT
- */
-#define OMAP54XX_LOSTCONTEXT_DFF_SHIFT						0
-#define OMAP54XX_LOSTCONTEXT_DFF_WIDTH						0x1
-#define OMAP54XX_LOSTCONTEXT_DFF_MASK						(1 << 0)
-
-/*
- * Used by RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT,
- * RM_C2C_MODEM_ICR_CONTEXT, RM_DMA_DMA_SYSTEM_CONTEXT, RM_DSP_DSP_CONTEXT,
- * RM_DSS_DSS_CONTEXT, RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT,
- * RM_EMIF_EMIF2_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT, RM_IPU_IPU_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_USB_HOST_HS_CONTEXT, RM_L3INIT_USB_OTG_SS_CONTEXT,
- * RM_L3INIT_USB_TLL_HS_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT,
- * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT,
- * RM_L3MAIN2_GPMC_CONTEXT, RM_L3MAIN2_L3_MAIN_2_CONTEXT,
- * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_MAILBOX_CONTEXT,
- * RM_L4CFG_SPINLOCK_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
- * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
- * RM_L4PER_GPIO7_CONTEXT, RM_L4PER_GPIO8_CONTEXT, RM_L4PER_I2C1_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
- * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT,
- * RM_L4PER_UART6_CONTEXT, RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT,
- * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT, RM_L4SEC_RNG_CONTEXT,
- * RM_L4SEC_SHA2MD5_CONTEXT, RM_MIPIEXT_LLI_CONTEXT,
- * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT
- */
-#define OMAP54XX_LOSTCONTEXT_RFF_SHIFT						1
-#define OMAP54XX_LOSTCONTEXT_RFF_WIDTH						0x1
-#define OMAP54XX_LOSTCONTEXT_RFF_MASK						(1 << 1)
-
-/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP54XX_LOSTMEM_AESSMEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_AESSMEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_AESSMEM_MASK						(1 << 8)
-
-/* Used by RM_CAM_CAL_CONTEXT */
-#define OMAP54XX_LOSTMEM_CAL_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_CAL_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_CAL_MEM_MASK						(1 << 8)
-
-/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP54XX_LOSTMEM_CAM_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_CAM_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_CAM_MEM_MASK						(1 << 8)
-
-/* Used by RM_EMIF_DMM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_SHIFT					9
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_MASK					(1 << 9)
-
-/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_L3INSTR_OCP_WP_NOC_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_SHIFT				8
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_WIDTH				0x1
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_MASK				(1 << 8)
-
-/* Used by RM_L3MAIN2_OCMC_RAM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_SHIFT					8
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_MASK					(1 << 8)
-
-/* Used by RM_DMA_DMA_SYSTEM_CONTEXT, RM_EMIF_DMM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_MASK					(1 << 8)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_EDMA_SHIFT						10
-#define OMAP54XX_LOSTMEM_DSP_EDMA_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_EDMA_MASK						(1 << 10)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_L1_SHIFT						8
-#define OMAP54XX_LOSTMEM_DSP_L1_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_L1_MASK						(1 << 8)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_L2_SHIFT						9
-#define OMAP54XX_LOSTMEM_DSP_L2_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_L2_MASK						(1 << 9)
-
-/* Used by RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSS_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_DSS_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSS_MEM_MASK						(1 << 8)
-
-/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP54XX_LOSTMEM_EMU_BANK_SHIFT						8
-#define OMAP54XX_LOSTMEM_EMU_BANK_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_EMU_BANK_MASK						(1 << 8)
-
-/* Used by RM_GPU_GPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_GPU_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_GPU_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_GPU_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_HWA_MEM_SHIFT						10
-#define OMAP54XX_LOSTMEM_HWA_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_HWA_MEM_MASK						(1 << 10)
-
-/* Used by RM_IPU_IPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_SHIFT					9
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_MASK						(1 << 9)
-
-/* Used by RM_IPU_IPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_SHIFT					8
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_MASK					(1 << 8)
-
-/*
- * Used by RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT,
- * RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT,
- * RM_L3INIT_USB_OTG_SS_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_SHIFT					8
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_MASK					(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_MPU_L2_SHIFT						9
-#define OMAP54XX_LOSTMEM_MPU_L2_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_MPU_L2_MASK						(1 << 9)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_MPU_RAM_SHIFT						10
-#define OMAP54XX_LOSTMEM_MPU_RAM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_MPU_RAM_MASK						(1 << 10)
-
-/*
- * Used by RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT,
- * RM_L4SEC_FPKA_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_MASK					(1 << 8)
-
-/*
- * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
- * RM_ABE_MCBSP3_CONTEXT, RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_PERIHPMEM_SHIFT					8
-#define OMAP54XX_LOSTMEM_PERIHPMEM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_PERIHPMEM_MASK						(1 << 8)
-
-/*
- * Used by RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
- * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT,
- * RM_L4PER_UART6_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_MASK					(1 << 8)
-
-/* Used by RM_IVA_SL2_CONTEXT */
-#define OMAP54XX_LOSTMEM_SL2_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_SL2_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_SL2_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_TCM1_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_TCM1_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_TCM1_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_TCM2_MEM_SHIFT						9
-#define OMAP54XX_LOSTMEM_TCM2_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_TCM2_MEM_MASK						(1 << 9)
-
-/* Used by RM_WKUPAON_SAR_RAM_CONTEXT */
-#define OMAP54XX_LOSTMEM_WKUP_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_WKUP_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_WKUP_BANK_MASK						(1 << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL,
- * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_LOWPOWERSTATECHANGE_SHIFT					4
-#define OMAP54XX_LOWPOWERSTATECHANGE_WIDTH					0x1
-#define OMAP54XX_LOWPOWERSTATECHANGE_MASK					(1 << 4)
-
-/* Used by PRM_DEBUG_TRANS_CFG */
-#define OMAP54XX_MODE_SHIFT							0
-#define OMAP54XX_MODE_WIDTH							0x2
-#define OMAP54XX_MODE_MASK							(0x3 << 0)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_SHIFT					9
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_WIDTH					0x1
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_MASK					(1 << 9)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP54XX_MODEM_WAKE_IRQ_SHIFT						8
-#define OMAP54XX_MODEM_WAKE_IRQ_WIDTH						0x1
-#define OMAP54XX_MODEM_WAKE_IRQ_MASK						(1 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_L2_ONSTATE_SHIFT						18
-#define OMAP54XX_MPU_L2_ONSTATE_WIDTH						0x2
-#define OMAP54XX_MPU_L2_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_L2_RETSTATE_SHIFT						9
-#define OMAP54XX_MPU_L2_RETSTATE_WIDTH						0x1
-#define OMAP54XX_MPU_L2_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP54XX_MPU_L2_STATEST_SHIFT						6
-#define OMAP54XX_MPU_L2_STATEST_WIDTH						0x2
-#define OMAP54XX_MPU_L2_STATEST_MASK						(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_RAM_ONSTATE_SHIFT						20
-#define OMAP54XX_MPU_RAM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_MPU_RAM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_RAM_RETSTATE_SHIFT						10
-#define OMAP54XX_MPU_RAM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_MPU_RAM_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP54XX_MPU_RAM_STATEST_SHIFT						8
-#define OMAP54XX_MPU_RAM_STATEST_WIDTH						0x2
-#define OMAP54XX_MPU_RAM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_SHIFT					2
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_WIDTH					0x1
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_MASK					(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_MPU_WDT_RST_SHIFT						3
-#define OMAP54XX_MPU_WDT_RST_WIDTH						0x1
-#define OMAP54XX_MPU_WDT_RST_MASK						(1 << 3)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_NOCAP_SHIFT							4
-#define OMAP54XX_NOCAP_WIDTH							0x1
-#define OMAP54XX_NOCAP_MASK							(1 << 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_SHIFT					24
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_WIDTH					0x2
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_MASK					(0x3 << 24)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_SHIFT					12
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_WIDTH					0x1
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_MASK					(1 << 12)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_OCP_NRET_BANK_STATEST_SHIFT					12
-#define OMAP54XX_OCP_NRET_BANK_STATEST_WIDTH					0x2
-#define OMAP54XX_OCP_NRET_BANK_STATEST_MASK					(0x3 << 12)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_OFF_SHIFT							0
-#define OMAP54XX_OFF_WIDTH							0x8
-#define OMAP54XX_OFF_MASK							(0xff << 0)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_ON_SHIFT							24
-#define OMAP54XX_ON_WIDTH							0x8
-#define OMAP54XX_ON_MASK							(0xff << 24)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_ONLP_SHIFT							16
-#define OMAP54XX_ONLP_WIDTH							0x8
-#define OMAP54XX_ONLP_MASK							(0xff << 16)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_OPP_CHANGE_SHIFT						2
-#define OMAP54XX_OPP_CHANGE_WIDTH						0x1
-#define OMAP54XX_OPP_CHANGE_MASK						(1 << 2)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_SHIFT					25
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_WIDTH					0x1
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_MASK					(1 << 25)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_OPP_SEL_SHIFT							0
-#define OMAP54XX_OPP_SEL_WIDTH							0x2
-#define OMAP54XX_OPP_SEL_MASK							(0x3 << 0)
-
-/* Used by PRM_DEBUG_OUT */
-#define OMAP54XX_OUTPUT_SHIFT							0
-#define OMAP54XX_OUTPUT_WIDTH							0x20
-#define OMAP54XX_OUTPUT_MASK							(0xffffffff << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_PCHARGECNT_VALUE_SHIFT						0
-#define OMAP54XX_PCHARGECNT_VALUE_WIDTH						0x6
-#define OMAP54XX_PCHARGECNT_VALUE_MASK						(0x3f << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP54XX_PCHARGE_TIME_SHIFT						0
-#define OMAP54XX_PCHARGE_TIME_WIDTH						0x8
-#define OMAP54XX_PCHARGE_TIME_MASK						(0xff << 0)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_PERIPHMEM_ONSTATE_SHIFT					20
-#define OMAP54XX_PERIPHMEM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_PERIPHMEM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_PERIPHMEM_RETSTATE_SHIFT					10
-#define OMAP54XX_PERIPHMEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_PERIPHMEM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP54XX_PERIPHMEM_STATEST_SHIFT					8
-#define OMAP54XX_PERIPHMEM_STATEST_WIDTH					0x2
-#define OMAP54XX_PERIPHMEM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PRM_PHASE1_CNDP */
-#define OMAP54XX_PHASE1_CNDP_SHIFT						0
-#define OMAP54XX_PHASE1_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE1_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PHASE2A_CNDP */
-#define OMAP54XX_PHASE2A_CNDP_SHIFT						0
-#define OMAP54XX_PHASE2A_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE2A_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PHASE2B_CNDP */
-#define OMAP54XX_PHASE2B_CNDP_SHIFT						0
-#define OMAP54XX_PHASE2B_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE2B_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_SHIFT					8
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_WIDTH					0x8
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_MASK					(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL,
- * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_EMU_PWRSTCTRL, PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_POWERSTATE_SHIFT						0
-#define OMAP54XX_POWERSTATE_WIDTH						0x2
-#define OMAP54XX_POWERSTATE_MASK						(0x3 << 0)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_POWERSTATEST_SHIFT						0
-#define OMAP54XX_POWERSTATEST_WIDTH						0x2
-#define OMAP54XX_POWERSTATEST_MASK						(0x3 << 0)
-
-/* Used by PRM_PWRREQCTRL */
-#define OMAP54XX_PWRREQ_COND_SHIFT						0
-#define OMAP54XX_PWRREQ_COND_WIDTH						0x2
-#define OMAP54XX_PWRREQ_COND_MASK						(0x3 << 0)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RACEN_VDD_CORE_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_CORE_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RACEN_VDD_MM_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_MM_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RACEN_VDD_MPU_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_MPU_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RAC_VDD_CORE_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_CORE_L_MASK						(1 << 26)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RAC_VDD_MM_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_MM_L_MASK						(1 << 26)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RAC_VDD_MPU_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_MPU_L_MASK						(1 << 26)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_DOWN_COUNT_SHIFT						16
-#define OMAP54XX_RAMP_DOWN_COUNT_WIDTH						0x6
-#define OMAP54XX_RAMP_DOWN_COUNT_MASK						(0x3f << 16)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_DOWN_PRESCAL_SHIFT					24
-#define OMAP54XX_RAMP_DOWN_PRESCAL_WIDTH					0x2
-#define OMAP54XX_RAMP_DOWN_PRESCAL_MASK						(0x3 << 24)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_UP_COUNT_SHIFT						0
-#define OMAP54XX_RAMP_UP_COUNT_WIDTH						0x6
-#define OMAP54XX_RAMP_UP_COUNT_MASK						(0x3f << 0)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_UP_PRESCAL_SHIFT						8
-#define OMAP54XX_RAMP_UP_PRESCAL_WIDTH						0x2
-#define OMAP54XX_RAMP_UP_PRESCAL_MASK						(0x3 << 8)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RAV_VDD_CORE_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_CORE_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RAV_VDD_MM_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_MM_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RAV_VDD_MPU_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_MPU_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_REGADDR_SHIFT							8
-#define OMAP54XX_REGADDR_WIDTH							0x8
-#define OMAP54XX_REGADDR_MASK							(0xff << 8)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_RET_SHIFT							8
-#define OMAP54XX_RET_WIDTH							0x8
-#define OMAP54XX_RET_MASK							(0xff << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_RETMODE_ENABLE_SHIFT						0
-#define OMAP54XX_RETMODE_ENABLE_WIDTH						0x1
-#define OMAP54XX_RETMODE_ENABLE_MASK						(1 << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP54XX_RSTTIME1_SHIFT							0
-#define OMAP54XX_RSTTIME1_WIDTH							0xa
-#define OMAP54XX_RSTTIME1_MASK							(0x3ff << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP54XX_RSTTIME2_SHIFT							10
-#define OMAP54XX_RSTTIME2_WIDTH							0x5
-#define OMAP54XX_RSTTIME2_MASK							(0x1f << 10)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_CPU0_SHIFT							0
-#define OMAP54XX_RST_CPU0_WIDTH							0x1
-#define OMAP54XX_RST_CPU0_MASK							(1 << 0)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_CPU1_SHIFT							1
-#define OMAP54XX_RST_CPU1_WIDTH							0x1
-#define OMAP54XX_RST_CPU1_MASK							(1 << 1)
-
-/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_SHIFT							0
-#define OMAP54XX_RST_DSP_WIDTH							0x1
-#define OMAP54XX_RST_DSP_MASK							(1 << 0)
-
-/* Used by RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_EMU_SHIFT						2
-#define OMAP54XX_RST_DSP_EMU_WIDTH						0x1
-#define OMAP54XX_RST_DSP_EMU_MASK						(1 << 2)
-
-/* Used by RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_EMU_REQ_SHIFT						3
-#define OMAP54XX_RST_DSP_EMU_REQ_WIDTH						0x1
-#define OMAP54XX_RST_DSP_EMU_REQ_MASK						(1 << 3)
-
-/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_MMU_CACHE_SHIFT					1
-#define OMAP54XX_RST_DSP_MMU_CACHE_WIDTH					0x1
-#define OMAP54XX_RST_DSP_MMU_CACHE_MASK						(1 << 1)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_EMULATION_CPU0_SHIFT					3
-#define OMAP54XX_RST_EMULATION_CPU0_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_CPU0_MASK					(1 << 3)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_EMULATION_CPU1_SHIFT					4
-#define OMAP54XX_RST_EMULATION_CPU1_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_CPU1_MASK					(1 << 4)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_EMULATION_SEQ1_SHIFT					3
-#define OMAP54XX_RST_EMULATION_SEQ1_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_SEQ1_MASK					(1 << 3)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_EMULATION_SEQ2_SHIFT					4
-#define OMAP54XX_RST_EMULATION_SEQ2_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_SEQ2_MASK					(1 << 4)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP54XX_RST_GLOBAL_COLD_SW_SHIFT					1
-#define OMAP54XX_RST_GLOBAL_COLD_SW_WIDTH					0x1
-#define OMAP54XX_RST_GLOBAL_COLD_SW_MASK					(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP54XX_RST_GLOBAL_WARM_SW_SHIFT					0
-#define OMAP54XX_RST_GLOBAL_WARM_SW_WIDTH					0x1
-#define OMAP54XX_RST_GLOBAL_WARM_SW_MASK					(1 << 0)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_CPU0_SHIFT					5
-#define OMAP54XX_RST_ICECRUSHER_CPU0_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_CPU0_MASK					(1 << 5)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_CPU1_SHIFT					6
-#define OMAP54XX_RST_ICECRUSHER_CPU1_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_CPU1_MASK					(1 << 6)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_SHIFT					5
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_MASK					(1 << 5)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_SHIFT					6
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_MASK					(1 << 6)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_IPU_MMU_CACHE_SHIFT					2
-#define OMAP54XX_RST_IPU_MMU_CACHE_WIDTH					0x1
-#define OMAP54XX_RST_IPU_MMU_CACHE_MASK						(1 << 2)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_LOGIC_SHIFT						2
-#define OMAP54XX_RST_LOGIC_WIDTH						0x1
-#define OMAP54XX_RST_LOGIC_MASK							(1 << 2)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_SEQ1_SHIFT							0
-#define OMAP54XX_RST_SEQ1_WIDTH							0x1
-#define OMAP54XX_RST_SEQ1_MASK							(1 << 0)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_SEQ2_SHIFT							1
-#define OMAP54XX_RST_SEQ2_WIDTH							0x1
-#define OMAP54XX_RST_SEQ2_MASK							(1 << 1)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_R_RTL_SHIFT							11
-#define OMAP54XX_R_RTL_WIDTH							0x5
-#define OMAP54XX_R_RTL_MASK							(0x1f << 11)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_SA_VDD_CORE_L_SHIFT						0
-#define OMAP54XX_SA_VDD_CORE_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_CORE_L_MASK						(0x7f << 0)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_SA_VDD_MM_L_SHIFT						0
-#define OMAP54XX_SA_VDD_MM_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_MM_L_MASK						(0x7f << 0)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_SA_VDD_MPU_L_SHIFT						0
-#define OMAP54XX_SA_VDD_MPU_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_MPU_L_MASK						(0x7f << 0)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_SCHEME_SHIFT							30
-#define OMAP54XX_SCHEME_WIDTH							0x2
-#define OMAP54XX_SCHEME_MASK							(0x3 << 30)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_SCLH_SHIFT							0
-#define OMAP54XX_SCLH_WIDTH							0x8
-#define OMAP54XX_SCLH_MASK							(0xff << 0)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_SCLL_SHIFT							8
-#define OMAP54XX_SCLL_WIDTH							0x8
-#define OMAP54XX_SCLL_MASK							(0xff << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_SECURE_WDT_RST_SHIFT						4
-#define OMAP54XX_SECURE_WDT_RST_WIDTH						0x1
-#define OMAP54XX_SECURE_WDT_RST_MASK						(1 << 4)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_CORE_L_SHIFT					24
-#define OMAP54XX_SEL_SA_VDD_CORE_L_WIDTH					0x1
-#define OMAP54XX_SEL_SA_VDD_CORE_L_MASK						(1 << 24)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_MM_L_SHIFT						24
-#define OMAP54XX_SEL_SA_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_SEL_SA_VDD_MM_L_MASK						(1 << 24)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_MPU_L_SHIFT						24
-#define OMAP54XX_SEL_SA_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_SEL_SA_VDD_MPU_L_MASK						(1 << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_SL2_MEM_ONSTATE_SHIFT						18
-#define OMAP54XX_SL2_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_SL2_MEM_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_SL2_MEM_RETSTATE_SHIFT						9
-#define OMAP54XX_SL2_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_SL2_MEM_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_SL2_MEM_STATEST_SHIFT						6
-#define OMAP54XX_SL2_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_SL2_MEM_STATEST_MASK						(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_SLAVEADDR_SHIFT						0
-#define OMAP54XX_SLAVEADDR_WIDTH						0x7
-#define OMAP54XX_SLAVEADDR_MASK							(0x7f << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_SLPCNT_VALUE_SHIFT						16
-#define OMAP54XX_SLPCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_SLPCNT_VALUE_MASK						(0xff << 16)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP54XX_SMPSWAITTIMEMAX_SHIFT						8
-#define OMAP54XX_SMPSWAITTIMEMAX_WIDTH						0x10
-#define OMAP54XX_SMPSWAITTIMEMAX_MASK						(0xffff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP54XX_SMPSWAITTIMEMIN_SHIFT						8
-#define OMAP54XX_SMPSWAITTIMEMIN_WIDTH						0x10
-#define OMAP54XX_SMPSWAITTIMEMIN_MASK						(0xffff << 8)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_CORE_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_CORE_MASK						(1 << 1)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_MM_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_MM_MASK						(1 << 1)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_MPU_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_MPU_MASK						(1 << 1)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_CORE_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_CORE_MASK						(1 << 0)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_MM_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_MM_MASK						(1 << 0)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_MPU_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_MPU_MASK						(1 << 0)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_MASK					(1 << 2)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_MASK					(1 << 2)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_MASK					(1 << 2)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_SR2EN_SHIFT							0
-#define OMAP54XX_SR2EN_WIDTH							0x1
-#define OMAP54XX_SR2EN_MASK							(1 << 0)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_SR2_IN_TRANSITION_SHIFT					6
-#define OMAP54XX_SR2_IN_TRANSITION_WIDTH					0x1
-#define OMAP54XX_SR2_IN_TRANSITION_MASK						(1 << 6)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_SR2_STATUS_SHIFT						3
-#define OMAP54XX_SR2_STATUS_WIDTH						0x2
-#define OMAP54XX_SR2_STATUS_MASK						(0x3 << 3)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_SR2_WTCNT_VALUE_SHIFT						8
-#define OMAP54XX_SR2_WTCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_SR2_WTCNT_VALUE_MASK						(0xff << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_SRAMLDO_STATUS_SHIFT						8
-#define OMAP54XX_SRAMLDO_STATUS_WIDTH						0x1
-#define OMAP54XX_SRAMLDO_STATUS_MASK						(1 << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_SRAM_IN_TRANSITION_SHIFT					9
-#define OMAP54XX_SRAM_IN_TRANSITION_WIDTH					0x1
-#define OMAP54XX_SRAM_IN_TRANSITION_MASK					(1 << 9)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_SRMODEEN_SHIFT							4
-#define OMAP54XX_SRMODEEN_WIDTH							0x1
-#define OMAP54XX_SRMODEEN_MASK							(1 << 4)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP54XX_STABLE_COUNT_SHIFT						0
-#define OMAP54XX_STABLE_COUNT_WIDTH						0x6
-#define OMAP54XX_STABLE_COUNT_MASK						(0x3f << 0)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP54XX_STABLE_PRESCAL_SHIFT						8
-#define OMAP54XX_STABLE_PRESCAL_WIDTH						0x2
-#define OMAP54XX_STABLE_PRESCAL_MASK						(0x3 << 8)
-
-/* Used by PRM_BANDGAP_SETUP */
-#define OMAP54XX_STARTUP_COUNT_SHIFT						0
-#define OMAP54XX_STARTUP_COUNT_WIDTH						0x8
-#define OMAP54XX_STARTUP_COUNT_MASK						(0xff << 0)
-
-/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
-#define OMAP54XX_STARTUP_COUNT_24_31_SHIFT					24
-#define OMAP54XX_STARTUP_COUNT_24_31_WIDTH					0x8
-#define OMAP54XX_STARTUP_COUNT_24_31_MASK					(0xff << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM1_MEM_ONSTATE_SHIFT						20
-#define OMAP54XX_TCM1_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_TCM1_MEM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM1_MEM_RETSTATE_SHIFT					10
-#define OMAP54XX_TCM1_MEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_TCM1_MEM_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_TCM1_MEM_STATEST_SHIFT						8
-#define OMAP54XX_TCM1_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_TCM1_MEM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM2_MEM_ONSTATE_SHIFT						22
-#define OMAP54XX_TCM2_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_TCM2_MEM_ONSTATE_MASK						(0x3 << 22)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM2_MEM_RETSTATE_SHIFT					11
-#define OMAP54XX_TCM2_MEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_TCM2_MEM_RETSTATE_MASK						(1 << 11)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_TCM2_MEM_STATEST_SHIFT						10
-#define OMAP54XX_TCM2_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_TCM2_MEM_STATEST_MASK						(0x3 << 10)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_TIMEOUT_SHIFT							0
-#define OMAP54XX_TIMEOUT_WIDTH							0x10
-#define OMAP54XX_TIMEOUT_MASK							(0xffff << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_TIMEOUTEN_SHIFT						3
-#define OMAP54XX_TIMEOUTEN_WIDTH						0x1
-#define OMAP54XX_TIMEOUTEN_MASK							(1 << 3)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_TRANSITION_EN_SHIFT						8
-#define OMAP54XX_TRANSITION_EN_WIDTH						0x1
-#define OMAP54XX_TRANSITION_EN_MASK						(1 << 8)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_TRANSITION_ST_SHIFT						8
-#define OMAP54XX_TRANSITION_ST_WIDTH						0x1
-#define OMAP54XX_TRANSITION_ST_MASK						(1 << 8)
-
-/* Used by PRM_DEBUG_TRANS_CFG */
-#define OMAP54XX_TRIGGER_CLEAR_SHIFT						2
-#define OMAP54XX_TRIGGER_CLEAR_WIDTH						0x1
-#define OMAP54XX_TRIGGER_CLEAR_MASK						(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_CORE_RST_SHIFT						13
-#define OMAP54XX_TSHUT_CORE_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_CORE_RST_MASK						(1 << 13)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_MM_RST_SHIFT						12
-#define OMAP54XX_TSHUT_MM_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_MM_RST_MASK						(1 << 12)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_MPU_RST_SHIFT						11
-#define OMAP54XX_TSHUT_MPU_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_MPU_RST_MASK						(1 << 11)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_VALID_SHIFT							24
-#define OMAP54XX_VALID_WIDTH							0x1
-#define OMAP54XX_VALID_MASK							(1 << 24)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_BYPASSACK_EN_SHIFT						14
-#define OMAP54XX_VC_BYPASSACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_BYPASSACK_EN_MASK						(1 << 14)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_BYPASSACK_ST_SHIFT						14
-#define OMAP54XX_VC_BYPASSACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_BYPASSACK_ST_MASK						(1 << 14)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_CORE_VPACK_EN_SHIFT						22
-#define OMAP54XX_VC_CORE_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_CORE_VPACK_EN_MASK						(1 << 22)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_CORE_VPACK_ST_SHIFT						22
-#define OMAP54XX_VC_CORE_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_CORE_VPACK_ST_MASK						(1 << 22)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_MM_VPACK_EN_SHIFT						30
-#define OMAP54XX_VC_MM_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_MM_VPACK_EN_MASK						(1 << 30)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_MM_VPACK_ST_SHIFT						30
-#define OMAP54XX_VC_MM_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_MM_VPACK_ST_MASK						(1 << 30)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VC_MPU_VPACK_EN_SHIFT						6
-#define OMAP54XX_VC_MPU_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_MPU_VPACK_EN_MASK						(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VC_MPU_VPACK_ST_SHIFT						6
-#define OMAP54XX_VC_MPU_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_MPU_VPACK_ST_MASK						(1 << 6)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_RAERR_EN_SHIFT						12
-#define OMAP54XX_VC_RAERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_RAERR_EN_MASK						(1 << 12)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_RAERR_ST_SHIFT						12
-#define OMAP54XX_VC_RAERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_RAERR_ST_MASK						(1 << 12)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_SAERR_EN_SHIFT						11
-#define OMAP54XX_VC_SAERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_SAERR_EN_MASK						(1 << 11)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_SAERR_ST_SHIFT						11
-#define OMAP54XX_VC_SAERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_SAERR_ST_MASK						(1 << 11)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_TOERR_EN_SHIFT						13
-#define OMAP54XX_VC_TOERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_TOERR_EN_MASK						(1 << 13)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_TOERR_ST_SHIFT						13
-#define OMAP54XX_VC_TOERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_TOERR_ST_MASK						(1 << 13)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_VDDMAX_SHIFT							24
-#define OMAP54XX_VDDMAX_WIDTH							0x8
-#define OMAP54XX_VDDMAX_MASK							(0xff << 24)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_VDDMIN_SHIFT							16
-#define OMAP54XX_VDDMIN_WIDTH							0x8
-#define OMAP54XX_VDDMIN_MASK							(0xff << 16)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_SHIFT					12
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_MASK					(1 << 12)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_SHIFT					8
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_MASK					(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MM_I2C_DISABLE_SHIFT					14
-#define OMAP54XX_VDD_MM_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_MM_I2C_DISABLE_MASK					(1 << 14)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MM_PRESENCE_SHIFT						9
-#define OMAP54XX_VDD_MM_PRESENCE_WIDTH						0x1
-#define OMAP54XX_VDD_MM_PRESENCE_MASK						(1 << 9)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_SHIFT					7
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_MASK					(1 << 7)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_SHIFT					13
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_MASK					(1 << 13)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MPU_PRESENCE_SHIFT						8
-#define OMAP54XX_VDD_MPU_PRESENCE_WIDTH						0x1
-#define OMAP54XX_VDD_MPU_PRESENCE_MASK						(1 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_SHIFT					6
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_MASK					(1 << 6)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_CORE_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_CORE_MASK						(1 << 4)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_MM_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_MM_MASK						(1 << 4)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_MPU_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_MPU_MASK						(1 << 4)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_CORE_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_CORE_MASK						(1 << 3)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_MM_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_MM_MASK						(1 << 3)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_MPU_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_MPU_MASK						(1 << 3)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_MASK					(1 << 5)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_MASK					(1 << 5)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_MASK					(1 << 5)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_VOLRA_VDD_CORE_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_CORE_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_CORE_L_MASK						(0xff << 8)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_VOLRA_VDD_MM_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_MM_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_MM_L_MASK						(0xff << 8)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_VOLRA_VDD_MPU_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_MPU_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_MPU_L_MASK						(0xff << 8)
-
-/* Used by PRM_VOLTST_MM, PRM_VOLTST_MPU */
-#define OMAP54XX_VOLTSTATEST_SHIFT						0
-#define OMAP54XX_VOLTSTATEST_WIDTH						0x2
-#define OMAP54XX_VOLTSTATEST_MASK						(0x3 << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_VPENABLE_SHIFT							0
-#define OMAP54XX_VPENABLE_WIDTH							0x1
-#define OMAP54XX_VPENABLE_MASK							(1 << 0)
-
-/* Used by PRM_VP_CORE_STATUS, PRM_VP_MM_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP54XX_VPINIDLE_SHIFT							0
-#define OMAP54XX_VPINIDLE_WIDTH							0x1
-#define OMAP54XX_VPINIDLE_MASK							(1 << 0)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP54XX_VPVOLTAGE_SHIFT						0
-#define OMAP54XX_VPVOLTAGE_WIDTH						0x8
-#define OMAP54XX_VPVOLTAGE_MASK							(0xff << 0)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_EQVALUE_EN_SHIFT					20
-#define OMAP54XX_VP_CORE_EQVALUE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_EQVALUE_EN_MASK					(1 << 20)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_EQVALUE_ST_SHIFT					20
-#define OMAP54XX_VP_CORE_EQVALUE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_EQVALUE_ST_MASK					(1 << 20)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_MAXVDD_EN_SHIFT					18
-#define OMAP54XX_VP_CORE_MAXVDD_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MAXVDD_EN_MASK						(1 << 18)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_MAXVDD_ST_SHIFT					18
-#define OMAP54XX_VP_CORE_MAXVDD_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MAXVDD_ST_MASK						(1 << 18)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_MINVDD_EN_SHIFT					17
-#define OMAP54XX_VP_CORE_MINVDD_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MINVDD_EN_MASK						(1 << 17)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_MINVDD_ST_SHIFT					17
-#define OMAP54XX_VP_CORE_MINVDD_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MINVDD_ST_MASK						(1 << 17)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_SHIFT					19
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_MASK					(1 << 19)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_SHIFT					19
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_MASK					(1 << 19)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_SHIFT					16
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_MASK					(1 << 16)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_SHIFT					16
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_MASK					(1 << 16)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_SHIFT					21
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_MASK					(1 << 21)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_SHIFT					21
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_MASK					(1 << 21)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_EQVALUE_EN_SHIFT						28
-#define OMAP54XX_VP_MM_EQVALUE_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_EQVALUE_EN_MASK						(1 << 28)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_EQVALUE_ST_SHIFT						28
-#define OMAP54XX_VP_MM_EQVALUE_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_EQVALUE_ST_MASK						(1 << 28)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_MAXVDD_EN_SHIFT						26
-#define OMAP54XX_VP_MM_MAXVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_MAXVDD_EN_MASK						(1 << 26)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_MAXVDD_ST_SHIFT						26
-#define OMAP54XX_VP_MM_MAXVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_MAXVDD_ST_MASK						(1 << 26)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_MINVDD_EN_SHIFT						25
-#define OMAP54XX_VP_MM_MINVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_MINVDD_EN_MASK						(1 << 25)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_MINVDD_ST_SHIFT						25
-#define OMAP54XX_VP_MM_MINVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_MINVDD_ST_MASK						(1 << 25)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_SHIFT					27
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_MASK					(1 << 27)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_SHIFT					27
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_MASK					(1 << 27)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_SHIFT					24
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_MASK					(1 << 24)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_SHIFT					24
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_MASK					(1 << 24)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_TRANXDONE_EN_SHIFT					29
-#define OMAP54XX_VP_MM_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_TRANXDONE_EN_MASK					(1 << 29)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_TRANXDONE_ST_SHIFT					29
-#define OMAP54XX_VP_MM_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_TRANXDONE_ST_MASK					(1 << 29)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_EQVALUE_EN_SHIFT					4
-#define OMAP54XX_VP_MPU_EQVALUE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_EQVALUE_EN_MASK						(1 << 4)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_EQVALUE_ST_SHIFT					4
-#define OMAP54XX_VP_MPU_EQVALUE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_EQVALUE_ST_MASK						(1 << 4)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_MAXVDD_EN_SHIFT						2
-#define OMAP54XX_VP_MPU_MAXVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MAXVDD_EN_MASK						(1 << 2)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_MAXVDD_ST_SHIFT						2
-#define OMAP54XX_VP_MPU_MAXVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MAXVDD_ST_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_MINVDD_EN_SHIFT						1
-#define OMAP54XX_VP_MPU_MINVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MINVDD_EN_MASK						(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_MINVDD_ST_SHIFT						1
-#define OMAP54XX_VP_MPU_MINVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MINVDD_ST_MASK						(1 << 1)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_SHIFT					3
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_MASK					(1 << 3)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_SHIFT					3
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_MASK					(1 << 3)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_SHIFT					0
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_MASK					(1 << 0)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_SHIFT					0
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_MASK					(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_SHIFT					5
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_MASK					(1 << 5)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_SHIFT					5
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_MASK					(1 << 5)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_VSETUPCNT_VALUE_SHIFT						8
-#define OMAP54XX_VSETUPCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_VSETUPCNT_VALUE_MASK						(0xff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP54XX_VSTEPMAX_SHIFT							0
-#define OMAP54XX_VSTEPMAX_WIDTH							0x8
-#define OMAP54XX_VSTEPMAX_MASK							(0xff << 0)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP54XX_VSTEPMIN_SHIFT							0
-#define OMAP54XX_VSTEPMIN_WIDTH							0x8
-#define OMAP54XX_VSTEPMIN_MASK							(0xff << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_DISPC_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_DSP_MASK						(1 << 2)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_DISPC_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_IPU_MASK						(1 << 1)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_DISPC_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_MPU_MASK						(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_MASK					(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_SHIFT					5
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_MASK					(1 << 5)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_SHIFT					4
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_MASK					(1 << 4)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_MASK					(1 << 7)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_SHIFT					10
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_MASK					(1 << 10)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_SHIFT					9
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_MASK					(1 << 9)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_SHIFT					8
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_MASK					(1 << 8)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_SHIFT					11
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_MASK					(1 << 11)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_SHIFT					17
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_MASK					(1 << 17)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_SHIFT					16
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_MASK					(1 << 16)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_SHIFT					15
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_MASK					(1 << 15)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_SHIFT					18
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_MASK					(1 << 18)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_MASK					(1 << 1)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO7_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO8_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_SHIFT					19
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_MASK					(1 << 19)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_SHIFT					14
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_MASK					(1 << 14)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_SHIFT					13
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_MASK					(1 << 13)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_SHIFT					12
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_MASK					(1 << 12)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_MASK					(1 << 6)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_KBD_WKDEP */
-#define OMAP54XX_WKUPDEP_KBD_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_KBD_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_KBD_MPU_MASK						(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_MASK					(1 << 2)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_DSP_SHIFT						2
-#define OMAP54XX_WKUPDEP_MMC1_DSP_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_DSP_MASK						(1 << 2)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC1_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_IPU_MASK						(1 << 1)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC1_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_MPU_MASK						(1 << 0)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_DSP_SHIFT						2
-#define OMAP54XX_WKUPDEP_MMC2_DSP_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_DSP_MASK						(1 << 2)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC2_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_IPU_MASK						(1 << 1)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC2_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_MPU_MASK						(1 << 0)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC3_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC3_IPU_MASK						(1 << 1)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC3_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC3_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC4_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC4_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC4_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC4_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC4_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC5_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC5_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC5_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC5_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC5_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP54XX_WKUPDEP_SATA_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_SATA_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_SATA_MPU_MASK						(1 << 0)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT				7
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_SHIFT				1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_MASK				(1 << 1)
-
-/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_MASK				(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_MM_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_MASK				(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_MPU_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_TIMER10_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER11_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER11_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_TIMER12_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_TIMER1_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER2_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER4_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER4_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER9_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER9_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP54XX_WKUPDEP_UART1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART1_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP54XX_WKUPDEP_UART1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP54XX_WKUPDEP_UART2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART2_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP54XX_WKUPDEP_UART2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_UART3_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_DSP_MASK						(1 << 2)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_UART3_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_IPU_MASK						(1 << 1)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP54XX_WKUPDEP_UART4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART4_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP54XX_WKUPDEP_UART4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART4_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART5_WKDEP */
-#define OMAP54XX_WKUPDEP_UART5_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART5_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART5_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART5_WKDEP */
-#define OMAP54XX_WKUPDEP_UART5_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART5_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART5_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART6_WKDEP */
-#define OMAP54XX_WKUPDEP_UART6_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART6_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART6_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART6_WKDEP */
-#define OMAP54XX_WKUPDEP_UART6_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART6_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART6_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_UNIPRO2_WKDEP */
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_WD_TIMER2_WKDEP */
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_WD_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_MASK					(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_WUCLK_CTRL_SHIFT						8
-#define OMAP54XX_WUCLK_CTRL_WIDTH						0x1
-#define OMAP54XX_WUCLK_CTRL_MASK						(1 << 8)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_WUCLK_STATUS_SHIFT						9
-#define OMAP54XX_WUCLK_STATUS_WIDTH						0x1
-#define OMAP54XX_WUCLK_STATUS_MASK						(1 << 9)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_X_MAJOR_SHIFT							8
-#define OMAP54XX_X_MAJOR_WIDTH							0x3
-#define OMAP54XX_X_MAJOR_MASK							(0x7 << 8)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_Y_MINOR_SHIFT							0
-#define OMAP54XX_Y_MINOR_WIDTH							0x6
-#define OMAP54XX_Y_MINOR_MASK							(0x3f << 0)
-#endif
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 277f71794e61..f8eb83323b1a 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -144,7 +144,13 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap3xxx_prm_reconfigure_io_chain(void);
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap3xxx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 415c7e0c9393..03a603476cfc 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -620,6 +620,15 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+static int omap4_check_vcvp(void)
+{
+	/* No VC/VP on dra7xx devices */
+	if (soc_is_dra7xx())
+		return 0;
+
+	return 1;
+}
+
 struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
@@ -637,6 +646,7 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
 	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
 /*
@@ -650,7 +660,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
-	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx())
 		return 0;
 
 	return prm_register(&omap44xx_prm_ll_data);
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7cd22abb8f15..a085d9cc1f5d 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -42,7 +42,13 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap44xx_prm_reconfigure_io_chain(void);
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap44xx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
new file mode 100644
index 000000000000..d92a8404edc7
--- /dev/null
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -0,0 +1,678 @@
+/*
+ * DRA7xx PRM instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
+
+#include "prm44xx_54xx.h"
+#include "prcm-common.h"
+#include "prm.h"
+
+#define DRA7XX_PRM_BASE		0x4ae06000
+
+#define DRA7XX_PRM_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define DRA7XX_PRM_OCP_SOCKET_INST	0x0000
+#define DRA7XX_PRM_CKGEN_INST		0x0100
+#define DRA7XX_PRM_MPU_INST		0x0300
+#define DRA7XX_PRM_DSP1_INST		0x0400
+#define DRA7XX_PRM_IPU_INST		0x0500
+#define DRA7XX_PRM_COREAON_INST		0x0628
+#define DRA7XX_PRM_CORE_INST		0x0700
+#define DRA7XX_PRM_IVA_INST		0x0f00
+#define DRA7XX_PRM_CAM_INST		0x1000
+#define DRA7XX_PRM_DSS_INST		0x1100
+#define DRA7XX_PRM_GPU_INST		0x1200
+#define DRA7XX_PRM_L3INIT_INST		0x1300
+#define DRA7XX_PRM_L4PER_INST		0x1400
+#define DRA7XX_PRM_CUSTEFUSE_INST	0x1600
+#define DRA7XX_PRM_WKUPAON_INST		0x1724
+#define DRA7XX_PRM_WKUPAON_CM_INST	0x1800
+#define DRA7XX_PRM_EMU_INST		0x1900
+#define DRA7XX_PRM_EMU_CM_INST		0x1a00
+#define DRA7XX_PRM_DSP2_INST		0x1b00
+#define DRA7XX_PRM_EVE1_INST		0x1b40
+#define DRA7XX_PRM_EVE2_INST		0x1b80
+#define DRA7XX_PRM_EVE3_INST		0x1bc0
+#define DRA7XX_PRM_EVE4_INST		0x1c00
+#define DRA7XX_PRM_RTC_INST		0x1c60
+#define DRA7XX_PRM_VPE_INST		0x1c80
+#define DRA7XX_PRM_DEVICE_INST		0x1d00
+#define DRA7XX_PRM_INSTR_INST		0x1f00
+
+/* PRM clockdomain register offsets (from instance start) */
+#define DRA7XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS	0x0000
+#define DRA7XX_PRM_EMU_CM_EMU_CDOFFS		0x0000
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define DRA7XX_REVISION_PRM_OFFSET				0x0000
+#define DRA7XX_PRM_IRQSTATUS_MPU_OFFSET				0x0010
+#define DRA7XX_PRM_IRQSTATUS_MPU_2_OFFSET			0x0014
+#define DRA7XX_PRM_IRQENABLE_MPU_OFFSET				0x0018
+#define DRA7XX_PRM_IRQENABLE_MPU_2_OFFSET			0x001c
+#define DRA7XX_PRM_IRQSTATUS_IPU2_OFFSET			0x0020
+#define DRA7XX_PRM_IRQENABLE_IPU2_OFFSET			0x0028
+#define DRA7XX_PRM_IRQSTATUS_DSP1_OFFSET			0x0030
+#define DRA7XX_PRM_IRQENABLE_DSP1_OFFSET			0x0038
+#define DRA7XX_CM_PRM_PROFILING_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_PRM_PROFILING_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_PRM_IRQENABLE_DSP2_OFFSET			0x0044
+#define DRA7XX_PRM_IRQENABLE_EVE1_OFFSET			0x0048
+#define DRA7XX_PRM_IRQENABLE_EVE2_OFFSET			0x004c
+#define DRA7XX_PRM_IRQENABLE_EVE3_OFFSET			0x0050
+#define DRA7XX_PRM_IRQENABLE_EVE4_OFFSET			0x0054
+#define DRA7XX_PRM_IRQENABLE_IPU1_OFFSET			0x0058
+#define DRA7XX_PRM_IRQSTATUS_DSP2_OFFSET			0x005c
+#define DRA7XX_PRM_IRQSTATUS_EVE1_OFFSET			0x0060
+#define DRA7XX_PRM_IRQSTATUS_EVE2_OFFSET			0x0064
+#define DRA7XX_PRM_IRQSTATUS_EVE3_OFFSET			0x0068
+#define DRA7XX_PRM_IRQSTATUS_EVE4_OFFSET			0x006c
+#define DRA7XX_PRM_IRQSTATUS_IPU1_OFFSET			0x0070
+#define DRA7XX_PRM_DEBUG_CFG1_OFFSET				0x00e4
+#define DRA7XX_PRM_DEBUG_CFG2_OFFSET				0x00e8
+#define DRA7XX_PRM_DEBUG_CFG3_OFFSET				0x00ec
+#define DRA7XX_PRM_DEBUG_OUT_OFFSET				0x00f4
+
+/* PRM.CKGEN_PRM register offsets */
+#define DRA7XX_CM_CLKSEL_SYSCLK1_OFFSET				0x0000
+#define DRA7XX_CM_CLKSEL_SYSCLK1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKSEL_WKUPAON_OFFSET				0x0008
+#define DRA7XX_CM_CLKSEL_WKUPAON				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0008)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_REF_OFFSET			0x000c
+#define DRA7XX_CM_CLKSEL_ABE_PLL_REF				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x000c)
+#define DRA7XX_CM_CLKSEL_SYS_OFFSET				0x0010
+#define DRA7XX_CM_CLKSEL_SYS					DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0010)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS_OFFSET			0x0014
+#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0014)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS_OFFSET			0x0018
+#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0018)
+#define DRA7XX_CM_CLKSEL_ABE_24M_OFFSET				0x001c
+#define DRA7XX_CM_CLKSEL_ABE_24M				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x001c)
+#define DRA7XX_CM_CLKSEL_ABE_SYS_OFFSET				0x0020
+#define DRA7XX_CM_CLKSEL_ABE_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0020)
+#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX_OFFSET			0x0024
+#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0024)
+#define DRA7XX_CM_CLKSEL_HDMI_TIMER_OFFSET			0x0028
+#define DRA7XX_CM_CLKSEL_HDMI_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0028)
+#define DRA7XX_CM_CLKSEL_MCASP_SYS_OFFSET			0x002c
+#define DRA7XX_CM_CLKSEL_MCASP_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x002c)
+#define DRA7XX_CM_CLKSEL_MLBP_MCASP_OFFSET			0x0030
+#define DRA7XX_CM_CLKSEL_MLBP_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0030)
+#define DRA7XX_CM_CLKSEL_MLB_MCASP_OFFSET			0x0034
+#define DRA7XX_CM_CLKSEL_MLB_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0034)
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX_OFFSET	0x0038
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0038)
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K_OFFSET			0x0040
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_CLKSEL_TIMER_SYS_OFFSET			0x0044
+#define DRA7XX_CM_CLKSEL_TIMER_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX_OFFSET		0x0048
+#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0048)
+#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER_OFFSET			0x004c
+#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x004c)
+#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX_OFFSET		0x0050
+#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER_OFFSET			0x0054
+#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX0_OFFSET			0x0058
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX0				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX1_OFFSET			0x005c
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX2_OFFSET			0x0060
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX2				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS_OFFSET			0x0064
+#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0064)
+#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS_OFFSET			0x0068
+#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0068)
+#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS_OFFSET			0x006c
+#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x006c)
+#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV_OFFSET			0x0070
+#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0070)
+#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV_OFFSET			0x0074
+#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0074)
+#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV_OFFSET			0x0078
+#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0078)
+#define DRA7XX_CM_CLKSEL_EVE_CLK_OFFSET				0x0080
+#define DRA7XX_CM_CLKSEL_EVE_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0080)
+#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX_OFFSET		0x0084
+#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0084)
+#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX_OFFSET	0x0088
+#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0088)
+#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX_OFFSET		0x008c
+#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x008c)
+#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX_OFFSET		0x0090
+#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0090)
+#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX_OFFSET		0x0094
+#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0094)
+#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX_OFFSET	0x0098
+#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0098)
+#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX_OFFSET		0x009c
+#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x009c)
+#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX_OFFSET		0x00a0
+#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a0)
+#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX_OFFSET		0x00a4
+#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a4)
+#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX_OFFSET		0x00a8
+#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a8)
+#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX_OFFSET	0x00ac
+#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00ac)
+#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX_OFFSET		0x00b0
+#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX_OFFSET		0x00b4
+#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b4)
+#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX_OFFSET		0x00b8
+#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b8)
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX_OFFSET	0x00bc
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00bc)
+#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX_OFFSET		0x00c0
+#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c0)
+#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX_OFFSET	0x00c4
+#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c4)
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX_OFFSET		0x00c8
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c8)
+#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX_OFFSET		0x00cc
+#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00cc)
+#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX_OFFSET		0x00d0
+#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d0)
+#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX_OFFSET		0x00d4
+#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d4)
+#define DRA7XX_CM_CLKSEL_ABE_LP_CLK_OFFSET			0x00d8
+#define DRA7XX_CM_CLKSEL_ABE_LP_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d8)
+#define DRA7XX_CM_CLKSEL_ADC_GFCLK_OFFSET			0x00dc
+#define DRA7XX_CM_CLKSEL_ADC_GFCLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00dc)
+#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX_OFFSET		0x00e0
+#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00e0)
+
+/* PRM.MPU_PRM register offsets */
+#define DRA7XX_PM_MPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_MPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
+
+/* PRM.DSP1_PRM register offsets */
+#define DRA7XX_PM_DSP1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSP1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_DSP1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_DSP1_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_DSP1_DSP1_CONTEXT_OFFSET			0x0024
+
+/* PRM.IPU_PRM register offsets */
+#define DRA7XX_PM_IPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_IPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_IPU1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_IPU1_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_IPU1_IPU1_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_IPU_MCASP1_WKDEP_OFFSET			0x0050
+#define DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET			0x0054
+#define DRA7XX_PM_IPU_TIMER5_WKDEP_OFFSET			0x0058
+#define DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET			0x005c
+#define DRA7XX_PM_IPU_TIMER6_WKDEP_OFFSET			0x0060
+#define DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET			0x0064
+#define DRA7XX_PM_IPU_TIMER7_WKDEP_OFFSET			0x0068
+#define DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET			0x006c
+#define DRA7XX_PM_IPU_TIMER8_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_IPU_I2C5_WKDEP_OFFSET				0x0078
+#define DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_IPU_UART6_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET			0x0084
+
+/* PRM.COREAON_PRM register offsets */
+#define DRA7XX_PM_COREAON_SMARTREFLEX_MPU_WKDEP_OFFSET		0x0000
+#define DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET	0x0004
+#define DRA7XX_PM_COREAON_SMARTREFLEX_CORE_WKDEP_OFFSET		0x0010
+#define DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET	0x0014
+#define DRA7XX_PM_COREAON_SMARTREFLEX_GPU_WKDEP_OFFSET		0x0030
+#define DRA7XX_RM_COREAON_SMARTREFLEX_GPU_CONTEXT_OFFSET	0x0034
+#define DRA7XX_PM_COREAON_SMARTREFLEX_DSPEVE_WKDEP_OFFSET	0x0040
+#define DRA7XX_RM_COREAON_SMARTREFLEX_DSPEVE_CONTEXT_OFFSET	0x0044
+#define DRA7XX_PM_COREAON_SMARTREFLEX_IVAHD_WKDEP_OFFSET	0x0050
+#define DRA7XX_RM_COREAON_SMARTREFLEX_IVAHD_CONTEXT_OFFSET	0x0054
+#define DRA7XX_RM_COREAON_DUMMY_MODULE1_CONTEXT_OFFSET		0x0084
+#define DRA7XX_RM_COREAON_DUMMY_MODULE2_CONTEXT_OFFSET		0x0094
+#define DRA7XX_RM_COREAON_DUMMY_MODULE3_CONTEXT_OFFSET		0x00a4
+#define DRA7XX_RM_COREAON_DUMMY_MODULE4_CONTEXT_OFFSET		0x00b4
+
+/* PRM.CORE_PRM register offsets */
+#define DRA7XX_PM_CORE_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CORE_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET		0x0024
+#define DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET			0x002c
+#define DRA7XX_RM_L3MAIN1_MMU_EDMA_CONTEXT_OFFSET		0x0034
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM1_WKDEP_OFFSET		0x0050
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM1_CONTEXT_OFFSET		0x0054
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM2_WKDEP_OFFSET		0x0058
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM2_CONTEXT_OFFSET		0x005c
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM3_WKDEP_OFFSET		0x0060
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM3_CONTEXT_OFFSET		0x0064
+#define DRA7XX_RM_L3MAIN1_OCMC_ROM_CONTEXT_OFFSET		0x006c
+#define DRA7XX_PM_L3MAIN1_TPCC_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_L3MAIN1_TPTC1_WKDEP_OFFSET			0x0078
+#define DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_L3MAIN1_TPTC2_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET			0x0084
+#define DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET			0x0094
+#define DRA7XX_RM_L3MAIN1_SPARE_CME_CONTEXT_OFFSET		0x009c
+#define DRA7XX_RM_L3MAIN1_SPARE_HDMI_CONTEXT_OFFSET		0x00a4
+#define DRA7XX_RM_L3MAIN1_SPARE_ICM_CONTEXT_OFFSET		0x00ac
+#define DRA7XX_RM_L3MAIN1_SPARE_IVA2_CONTEXT_OFFSET		0x00b4
+#define DRA7XX_RM_L3MAIN1_SPARE_SATA2_CONTEXT_OFFSET		0x00bc
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN4_CONTEXT_OFFSET		0x00c4
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN5_CONTEXT_OFFSET		0x00cc
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN6_CONTEXT_OFFSET		0x00d4
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL1_CONTEXT_OFFSET	0x00dc
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL2_CONTEXT_OFFSET	0x00f4
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL3_CONTEXT_OFFSET	0x00fc
+#define DRA7XX_RM_IPU2_RSTCTRL_OFFSET				0x0210
+#define DRA7XX_RM_IPU2_RSTST_OFFSET				0x0214
+#define DRA7XX_RM_IPU2_IPU2_CONTEXT_OFFSET			0x0224
+#define DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET			0x0324
+#define DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET			0x0424
+#define DRA7XX_RM_EMIF_EMIF_OCP_FW_CONTEXT_OFFSET		0x042c
+#define DRA7XX_RM_EMIF_EMIF1_CONTEXT_OFFSET			0x0434
+#define DRA7XX_RM_EMIF_EMIF2_CONTEXT_OFFSET			0x043c
+#define DRA7XX_RM_EMIF_EMIF_DLL_CONTEXT_OFFSET			0x0444
+#define DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET			0x0524
+#define DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET			0x0624
+#define DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET			0x062c
+#define DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET			0x0634
+#define DRA7XX_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET			0x063c
+#define DRA7XX_RM_L4CFG_OCP2SCP2_CONTEXT_OFFSET			0x0644
+#define DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET			0x064c
+#define DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET			0x0654
+#define DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET			0x065c
+#define DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET			0x0664
+#define DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET			0x066c
+#define DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET			0x0674
+#define DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET			0x067c
+#define DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET			0x0684
+#define DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET		0x068c
+#define DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET		0x0694
+#define DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET		0x069c
+#define DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET		0x06a4
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_RTC_CONTEXT_OFFSET	0x06ac
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CONTEXT_OFFSET	0x06b4
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_WKUP_CONTEXT_OFFSET	0x06bc
+#define DRA7XX_RM_L4CFG_IO_DELAY_BLOCK_CONTEXT_OFFSET		0x06c4
+#define DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET		0x0724
+#define DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET		0x072c
+#define DRA7XX_RM_L3INSTR_OCP_WP_NOC_CONTEXT_OFFSET		0x0744
+
+/* PRM.IVA_PRM register offsets */
+#define DRA7XX_PM_IVA_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_IVA_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_IVA_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_IVA_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_IVA_IVA_CONTEXT_OFFSET			0x0024
+#define DRA7XX_RM_IVA_SL2_CONTEXT_OFFSET			0x002c
+
+/* PRM.CAM_PRM register offsets */
+#define DRA7XX_PM_CAM_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CAM_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_CAM_VIP1_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_CAM_VIP1_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_CAM_VIP2_WKDEP_OFFSET				0x0028
+#define DRA7XX_RM_CAM_VIP2_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_CAM_VIP3_WKDEP_OFFSET				0x0030
+#define DRA7XX_RM_CAM_VIP3_CONTEXT_OFFSET			0x0034
+#define DRA7XX_RM_CAM_LVDSRX_CONTEXT_OFFSET			0x003c
+#define DRA7XX_RM_CAM_CSI1_CONTEXT_OFFSET			0x0044
+#define DRA7XX_RM_CAM_CSI2_CONTEXT_OFFSET			0x004c
+
+/* PRM.DSS_PRM register offsets */
+#define DRA7XX_PM_DSS_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSS_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_DSS_DSS_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_DSS_DSS2_WKDEP_OFFSET				0x0028
+#define DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET			0x0034
+#define DRA7XX_RM_DSS_SDVENC_CONTEXT_OFFSET			0x003c
+
+/* PRM.GPU_PRM register offsets */
+#define DRA7XX_PM_GPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_GPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_GPU_GPU_CONTEXT_OFFSET			0x0024
+
+/* PRM.L3INIT_PRM register offsets */
+#define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_L3INIT_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
+#define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
+#define DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET			0x0034
+#define DRA7XX_PM_L3INIT_USB_OTG_SS2_WKDEP_OFFSET		0x0040
+#define DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET		0x0044
+#define DRA7XX_PM_L3INIT_USB_OTG_SS3_WKDEP_OFFSET		0x0048
+#define DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET		0x004c
+#define DRA7XX_PM_L3INIT_USB_OTG_SS4_WKDEP_OFFSET		0x0050
+#define DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET		0x0054
+#define DRA7XX_RM_L3INIT_MLB_SS_CONTEXT_OFFSET			0x005c
+#define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET		0x007c
+#define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET			0x0088
+#define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET			0x00d4
+#define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET		0x00e4
+#define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET		0x00ec
+#define DRA7XX_PM_L3INIT_USB_OTG_SS1_WKDEP_OFFSET		0x00f0
+#define DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET		0x00f4
+
+/* PRM.L4PER_PRM register offsets */
+#define DRA7XX_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_L4PER_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L4PER2_L4PER2_CONTEXT_OFFSET			0x000c
+#define DRA7XX_RM_L4PER3_L4PER3_CONTEXT_OFFSET			0x0014
+#define DRA7XX_RM_L4PER2_PRUSS1_CONTEXT_OFFSET			0x001c
+#define DRA7XX_RM_L4PER2_PRUSS2_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_L4PER_TIMER10_WKDEP_OFFSET			0x0028
+#define DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_L4PER_TIMER11_WKDEP_OFFSET			0x0030
+#define DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET			0x0034
+#define DRA7XX_PM_L4PER_TIMER2_WKDEP_OFFSET			0x0038
+#define DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET			0x003c
+#define DRA7XX_PM_L4PER_TIMER3_WKDEP_OFFSET			0x0040
+#define DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET			0x0044
+#define DRA7XX_PM_L4PER_TIMER4_WKDEP_OFFSET			0x0048
+#define DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET			0x004c
+#define DRA7XX_PM_L4PER_TIMER9_WKDEP_OFFSET			0x0050
+#define DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET			0x0054
+#define DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET			0x005c
+#define DRA7XX_PM_L4PER_GPIO2_WKDEP_OFFSET			0x0060
+#define DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET			0x0064
+#define DRA7XX_PM_L4PER_GPIO3_WKDEP_OFFSET			0x0068
+#define DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET			0x006c
+#define DRA7XX_PM_L4PER_GPIO4_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_L4PER_GPIO5_WKDEP_OFFSET			0x0078
+#define DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_L4PER_GPIO6_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET			0x0084
+#define DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET			0x0094
+#define DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET			0x009c
+#define DRA7XX_PM_L4PER_I2C1_WKDEP_OFFSET			0x00a0
+#define DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET			0x00a4
+#define DRA7XX_PM_L4PER_I2C2_WKDEP_OFFSET			0x00a8
+#define DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET			0x00ac
+#define DRA7XX_PM_L4PER_I2C3_WKDEP_OFFSET			0x00b0
+#define DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET			0x00b4
+#define DRA7XX_PM_L4PER_I2C4_WKDEP_OFFSET			0x00b8
+#define DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET			0x00bc
+#define DRA7XX_RM_L4PER_L4PER1_CONTEXT_OFFSET			0x00c0
+#define DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET			0x00c4
+#define DRA7XX_PM_L4PER_TIMER13_WKDEP_OFFSET			0x00c8
+#define DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET			0x00cc
+#define DRA7XX_PM_L4PER_TIMER14_WKDEP_OFFSET			0x00d0
+#define DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET			0x00d4
+#define DRA7XX_PM_L4PER_TIMER15_WKDEP_OFFSET			0x00d8
+#define DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET			0x00dc
+#define DRA7XX_PM_L4PER_MCSPI1_WKDEP_OFFSET			0x00f0
+#define DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET			0x00f4
+#define DRA7XX_PM_L4PER_MCSPI2_WKDEP_OFFSET			0x00f8
+#define DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET			0x00fc
+#define DRA7XX_PM_L4PER_MCSPI3_WKDEP_OFFSET			0x0100
+#define DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET			0x0104
+#define DRA7XX_PM_L4PER_MCSPI4_WKDEP_OFFSET			0x0108
+#define DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET			0x010c
+#define DRA7XX_PM_L4PER_GPIO7_WKDEP_OFFSET			0x0110
+#define DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET			0x0114
+#define DRA7XX_PM_L4PER_GPIO8_WKDEP_OFFSET			0x0118
+#define DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET			0x011c
+#define DRA7XX_PM_L4PER_MMC3_WKDEP_OFFSET			0x0120
+#define DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET			0x0124
+#define DRA7XX_PM_L4PER_MMC4_WKDEP_OFFSET			0x0128
+#define DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET			0x012c
+#define DRA7XX_PM_L4PER_TIMER16_WKDEP_OFFSET			0x0130
+#define DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET			0x0134
+#define DRA7XX_PM_L4PER2_QSPI_WKDEP_OFFSET			0x0138
+#define DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET			0x013c
+#define DRA7XX_PM_L4PER_UART1_WKDEP_OFFSET			0x0140
+#define DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET			0x0144
+#define DRA7XX_PM_L4PER_UART2_WKDEP_OFFSET			0x0148
+#define DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET			0x014c
+#define DRA7XX_PM_L4PER_UART3_WKDEP_OFFSET			0x0150
+#define DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET			0x0154
+#define DRA7XX_PM_L4PER_UART4_WKDEP_OFFSET			0x0158
+#define DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET			0x015c
+#define DRA7XX_PM_L4PER2_MCASP2_WKDEP_OFFSET			0x0160
+#define DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET			0x0164
+#define DRA7XX_PM_L4PER2_MCASP3_WKDEP_OFFSET			0x0168
+#define DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET			0x016c
+#define DRA7XX_PM_L4PER_UART5_WKDEP_OFFSET			0x0170
+#define DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET			0x0174
+#define DRA7XX_PM_L4PER2_MCASP5_WKDEP_OFFSET			0x0178
+#define DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET			0x017c
+#define DRA7XX_PM_L4PER2_MCASP6_WKDEP_OFFSET			0x0180
+#define DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET			0x0184
+#define DRA7XX_PM_L4PER2_MCASP7_WKDEP_OFFSET			0x0188
+#define DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET			0x018c
+#define DRA7XX_PM_L4PER2_MCASP8_WKDEP_OFFSET			0x0190
+#define DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET			0x0194
+#define DRA7XX_PM_L4PER2_MCASP4_WKDEP_OFFSET			0x0198
+#define DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET			0x019c
+#define DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET			0x01a4
+#define DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET			0x01ac
+#define DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET			0x01b4
+#define DRA7XX_RM_L4SEC_FPKA_CONTEXT_OFFSET			0x01bc
+#define DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET			0x01c4
+#define DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET			0x01cc
+#define DRA7XX_PM_L4PER2_UART7_WKDEP_OFFSET			0x01d0
+#define DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET			0x01d4
+#define DRA7XX_RM_L4SEC_DMA_CRYPTO_CONTEXT_OFFSET		0x01dc
+#define DRA7XX_PM_L4PER2_UART8_WKDEP_OFFSET			0x01e0
+#define DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET			0x01e4
+#define DRA7XX_PM_L4PER2_UART9_WKDEP_OFFSET			0x01e8
+#define DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET			0x01ec
+#define DRA7XX_PM_L4PER2_DCAN2_WKDEP_OFFSET			0x01f0
+#define DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET			0x01f4
+#define DRA7XX_RM_L4SEC_SHA2MD52_CONTEXT_OFFSET			0x01fc
+
+/* PRM.CUSTEFUSE_PRM register offsets */
+#define DRA7XX_PM_CUSTEFUSE_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_CUSTEFUSE_PWRSTST_OFFSET			0x0004
+#define DRA7XX_RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT_OFFSET	0x0024
+
+/* PRM.WKUPAON_PRM register offsets */
+#define DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET		0x0000
+#define DRA7XX_PM_WKUPAON_WD_TIMER1_WKDEP_OFFSET		0x0004
+#define DRA7XX_RM_WKUPAON_WD_TIMER1_CONTEXT_OFFSET		0x0008
+#define DRA7XX_PM_WKUPAON_WD_TIMER2_WKDEP_OFFSET		0x000c
+#define DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET		0x0010
+#define DRA7XX_PM_WKUPAON_GPIO1_WKDEP_OFFSET			0x0014
+#define DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET			0x0018
+#define DRA7XX_PM_WKUPAON_TIMER1_WKDEP_OFFSET			0x001c
+#define DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET			0x0020
+#define DRA7XX_PM_WKUPAON_TIMER12_WKDEP_OFFSET			0x0024
+#define DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET		0x0028
+#define DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET		0x0030
+#define DRA7XX_RM_WKUPAON_SAR_RAM_CONTEXT_OFFSET		0x0040
+#define DRA7XX_PM_WKUPAON_KBD_WKDEP_OFFSET			0x0054
+#define DRA7XX_RM_WKUPAON_KBD_CONTEXT_OFFSET			0x0058
+#define DRA7XX_PM_WKUPAON_UART10_WKDEP_OFFSET			0x005c
+#define DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET			0x0060
+#define DRA7XX_PM_WKUPAON_DCAN1_WKDEP_OFFSET			0x0064
+#define DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET			0x0068
+#define DRA7XX_PM_WKUPAON_ADC_WKDEP_OFFSET				0x007c
+#define DRA7XX_RM_WKUPAON_ADC_CONTEXT_OFFSET			0x0080
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY1_CONTEXT_OFFSET		0x0090
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY2_CONTEXT_OFFSET		0x0098
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY3_CONTEXT_OFFSET		0x00a0
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY4_CONTEXT_OFFSET		0x00a8
+#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN2_CONTEXT_OFFSET		0x00b0
+#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN3_CONTEXT_OFFSET		0x00b8
+
+/* PRM.WKUPAON_CM register offsets */
+#define DRA7XX_CM_WKUPAON_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0020)
+#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL_OFFSET		0x0028
+#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0028)
+#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET		0x0030
+#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0030)
+#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0038)
+#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0040)
+#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET		0x0048
+#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0048)
+#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0050)
+#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0060)
+#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0078)
+#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0080)
+#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0088)
+#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0090)
+#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0098)
+#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL_OFFSET			0x00a0
+#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00a0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL_OFFSET		0x00b8
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b8)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL_OFFSET		0x00c8
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c8)
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d0)
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL_OFFSET		0x00d8
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d8)
+
+/* PRM.EMU_PRM register offsets */
+#define DRA7XX_PM_EMU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EMU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EMU_DEBUGSS_CONTEXT_OFFSET			0x0024
+
+/* PRM.EMU_CM register offsets */
+#define DRA7XX_CM_EMU_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL_OFFSET			0x0004
+#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x0004)
+#define DRA7XX_CM_EMU_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL_OFFSET		0x000c
+#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x000c)
+
+/* PRM.DSP2_PRM register offsets */
+#define DRA7XX_PM_DSP2_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSP2_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_DSP2_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_DSP2_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_DSP2_DSP2_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE1_PRM register offsets */
+#define DRA7XX_PM_EVE1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE1_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE1_EVE1_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE1_EVE1_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE2_PRM register offsets */
+#define DRA7XX_PM_EVE2_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE2_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE2_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE2_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE2_EVE2_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE2_EVE2_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE3_PRM register offsets */
+#define DRA7XX_PM_EVE3_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE3_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE3_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE3_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE3_EVE3_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE3_EVE3_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE4_PRM register offsets */
+#define DRA7XX_PM_EVE4_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE4_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE4_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE4_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE4_EVE4_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE4_EVE4_CONTEXT_OFFSET			0x0024
+
+/* PRM.RTC_PRM register offsets */
+#define DRA7XX_PM_RTC_RTCSS_WKDEP_OFFSET			0x0000
+#define DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET			0x0004
+
+/* PRM.VPE_PRM register offsets */
+#define DRA7XX_PM_VPE_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_VPE_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_VPE_VPE_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET			0x0024
+
+/* PRM.DEVICE_PRM register offsets */
+#define DRA7XX_PRM_RSTCTRL_OFFSET				0x0000
+#define DRA7XX_PRM_RSTST_OFFSET					0x0004
+#define DRA7XX_PRM_RSTTIME_OFFSET				0x0008
+#define DRA7XX_PRM_CLKREQCTRL_OFFSET				0x000c
+#define DRA7XX_PRM_VOLTCTRL_OFFSET				0x0010
+#define DRA7XX_PRM_PWRREQCTRL_OFFSET				0x0014
+#define DRA7XX_PRM_PSCON_COUNT_OFFSET				0x0018
+#define DRA7XX_PRM_IO_COUNT_OFFSET				0x001c
+#define DRA7XX_PRM_IO_PMCTRL_OFFSET				0x0020
+#define DRA7XX_PRM_VOLTSETUP_WARMRESET_OFFSET			0x0024
+#define DRA7XX_PRM_VOLTSETUP_CORE_OFF_OFFSET			0x0028
+#define DRA7XX_PRM_VOLTSETUP_MPU_OFF_OFFSET			0x002c
+#define DRA7XX_PRM_VOLTSETUP_MM_OFF_OFFSET			0x0030
+#define DRA7XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET		0x0034
+#define DRA7XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET		0x0038
+#define DRA7XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET		0x003c
+#define DRA7XX_PRM_SRAM_COUNT_OFFSET				0x00bc
+#define DRA7XX_PRM_SRAM_WKUP_SETUP_OFFSET			0x00c0
+#define DRA7XX_PRM_SLDO_CORE_SETUP_OFFSET			0x00c4
+#define DRA7XX_PRM_SLDO_CORE_CTRL_OFFSET			0x00c8
+#define DRA7XX_PRM_SLDO_MPU_SETUP_OFFSET			0x00cc
+#define DRA7XX_PRM_SLDO_MPU_CTRL_OFFSET				0x00d0
+#define DRA7XX_PRM_SLDO_GPU_SETUP_OFFSET			0x00d4
+#define DRA7XX_PRM_SLDO_GPU_CTRL_OFFSET				0x00d8
+#define DRA7XX_PRM_ABBLDO_MPU_SETUP_OFFSET			0x00dc
+#define DRA7XX_PRM_ABBLDO_MPU_CTRL_OFFSET			0x00e0
+#define DRA7XX_PRM_ABBLDO_GPU_SETUP_OFFSET			0x00e4
+#define DRA7XX_PRM_ABBLDO_GPU_CTRL_OFFSET			0x00e8
+#define DRA7XX_PRM_BANDGAP_SETUP_OFFSET				0x00ec
+#define DRA7XX_PRM_DEVICE_OFF_CTRL_OFFSET			0x00f0
+#define DRA7XX_PRM_PHASE1_CNDP_OFFSET				0x00f4
+#define DRA7XX_PRM_PHASE2A_CNDP_OFFSET				0x00f8
+#define DRA7XX_PRM_PHASE2B_CNDP_OFFSET				0x00fc
+#define DRA7XX_PRM_MODEM_IF_CTRL_OFFSET				0x0100
+#define DRA7XX_PRM_VOLTST_MPU_OFFSET				0x0110
+#define DRA7XX_PRM_VOLTST_MM_OFFSET				0x0114
+#define DRA7XX_PRM_SLDO_DSPEVE_SETUP_OFFSET			0x0118
+#define DRA7XX_PRM_SLDO_IVA_SETUP_OFFSET			0x011c
+#define DRA7XX_PRM_ABBLDO_DSPEVE_CTRL_OFFSET			0x0120
+#define DRA7XX_PRM_ABBLDO_IVA_CTRL_OFFSET			0x0124
+#define DRA7XX_PRM_SLDO_DSPEVE_CTRL_OFFSET			0x0128
+#define DRA7XX_PRM_SLDO_IVA_CTRL_OFFSET				0x012c
+#define DRA7XX_PRM_ABBLDO_DSPEVE_SETUP_OFFSET			0x0130
+#define DRA7XX_PRM_ABBLDO_IVA_SETUP_OFFSET			0x0134
+
+#endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 228b850e632f..a2e1174ad1b6 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
@@ -322,6 +323,16 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		prcm_irq_chips[i] = gc;
 	}
 
+	if (of_have_populated_dt()) {
+		int irq = omap_prcm_event_to_irq("io");
+		if (cpu_is_omap34xx())
+			omap_pcs_legacy_init(irq,
+				omap3xxx_prm_reconfigure_io_chain);
+		else
+			omap_pcs_legacy_init(irq,
+				omap44xx_prm_reconfigure_io_chain);
+	}
+
 	return 0;
 
 err:
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index c12320c0ae95..6334b96b4097 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -20,10 +20,13 @@
 #include "common.h"
 #include "prcm-common.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prcm_mpu44xx.h"
+#include "soc.h"
 
 static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
 
@@ -165,10 +168,19 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
 void omap4_prminst_global_warm_sw_reset(void)
 {
 	u32 v;
-
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
+	s16 dev_inst;
+
+	if (cpu_is_omap44xx())
+		dev_inst = OMAP4430_PRM_DEVICE_INST;
+	else if (soc_is_omap54xx())
+		dev_inst = OMAP54XX_PRM_DEVICE_INST;
+	else if (soc_is_dra7xx())
+		dev_inst = DRA7XX_PRM_DEVICE_INST;
+	else
+		return;
+
+	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
+					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
 				 OMAP4430_PRM_DEVICE_INST,
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 8c616e436bc7..076bd90a6ce0 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -8,6 +8,7 @@
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
  * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -35,6 +36,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/bitops.h>
+#include <linux/of.h>
 
 /*
  * Test if multicore OMAP support is needed
@@ -105,6 +107,15 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+# ifdef OMAP_NAME
+#  undef MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME DRA7XX
+# endif
+#endif
+
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
  */
@@ -233,6 +244,7 @@ IS_AM_SUBCLASS(437x, 0x437)
 #define cpu_is_omap447x()		0
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
+#define soc_is_dra7xx()			0
 
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
@@ -379,6 +391,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define soc_is_omap543x()		is_omap543x()
 #endif
 
+#if defined(CONFIG_SOC_DRA7XX)
+#undef soc_is_dra7xx
+#define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
+#endif
+
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	OMAP242X_CLASS
@@ -438,9 +455,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
 #define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
 #define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b37e1fcbad56..3ca81e0ada5e 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -55,6 +55,7 @@
 #include "soc.h"
 #include "common.h"
 #include "powerdomain.h"
+#include "omap-secure.h"
 
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
@@ -66,6 +67,15 @@
 static struct omap_dm_timer clkev;
 static struct clock_event_device clockevent_gpt;
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static unsigned long arch_timer_freq;
+
+void set_cntfreq(void)
+{
+	omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
+}
+#endif
+
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_gpt;
@@ -78,7 +88,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap2_gp_timer_irq = {
 	.name		= "gp_timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap2_gp_timer_interrupt,
 };
 
@@ -515,6 +525,10 @@ static void __init realtime_counter_init(void)
 		num = 8;
 		den = 25;
 		break;
+	case 20000000:
+		num = 192;
+		den = 625;
+		break;
 	case 2600000:
 		num = 384;
 		den = 1625;
@@ -537,11 +551,14 @@ static void __init realtime_counter_init(void)
 	reg |= num;
 	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
 
-	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+	reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= den;
 	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
+	arch_timer_freq = (rate / den) * num;
+	set_cntfreq();
+
 	iounmap(base);
 }
 #else
@@ -594,13 +611,14 @@ OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
 		       1, "timer_sys_ck", "ti,timer-alwon");
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
 static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
 			       2, "sys_clkin_ck", NULL);
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_LOCAL_TIMERS
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
 void __init omap4_local_timer_init(void)
 {
@@ -619,15 +637,15 @@ void __init omap4_local_timer_init(void)
 			pr_err("twd_local_timer_register failed %d\n", err);
 	}
 }
-#else /* CONFIG_LOCAL_TIMERS */
+#else
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
 }
-#endif /* CONFIG_LOCAL_TIMERS */
+#endif /* CONFIG_HAVE_ARM_TWD */
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
@@ -635,7 +653,7 @@ void __init omap5_realtime_timer_init(void)
 
 	clocksource_of_init();
 }
-#endif /* CONFIG_SOC_OMAP5 */
+#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 
 /**
  * omap_timer_init - build and register timer device with an
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898fbd634..b0d54dae1bcb 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio.h>
 #include <linux/string.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void)
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+	PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+	.consumers = consumers,
+	.num_consumers = ARRAY_SIZE(consumers),
+};
+
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
+	.init_data	= &init_data,
 };
 
 static int omap3_batt_table[] = {
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index e83a6a4b184a..10855eb4ccc1 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_gen_xceiv_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,11 +456,18 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
+		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
 			sizeof(struct usb_phy_gen_xceiv_platform_data);
 		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index e7261ebcf7b0..4ba2ae759895 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -58,7 +58,6 @@ struct usbhs_phy_data {
 	int reset_gpio;
 	int vcc_gpio;
 	bool vcc_polarity;	/* 1 active high, 0 active low */
-	void *platform_data;
 };
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b41599f98a8e..91a5852b44f3 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -174,8 +174,10 @@ void __init orion5x_xor_init(void)
  ****************************************************************************/
 static void __init orion5x_crypto_init(void)
 {
-	mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
-			      ORION5X_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
+				    ORION_MBUS_SRAM_ATTR,
+				    ORION5X_SRAM_PHYS_BASE,
+				    ORION5X_SRAM_SIZE);
 	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
 			  SZ_8K, IRQ_ORION5X_CESA);
 }
@@ -222,22 +224,24 @@ void orion5x_setup_wins(void)
 	 * The PCIe windows will no longer be statically allocated
 	 * here once Orion5x is migrated to the pci-mvebu driver.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
+					  ORION_MBUS_PCIE_IO_ATTR,
+					  ORION5X_PCIE_IO_PHYS_BASE,
 					  ORION5X_PCIE_IO_SIZE,
-					  ORION5X_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
-					  ORION5X_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+					  ORION5X_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
+				    ORION_MBUS_PCIE_MEM_ATTR,
+				    ORION5X_PCIE_MEM_PHYS_BASE,
+				    ORION5X_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
+					  ORION_MBUS_PCI_IO_ATTR,
+					  ORION5X_PCI_IO_PHYS_BASE,
 					  ORION5X_PCI_IO_SIZE,
-					  ORION5X_PCI_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
-					  ORION5X_PCI_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  ORION5X_PCI_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
+				    ORION_MBUS_PCI_MEM_ATTR,
+				    ORION5X_PCI_MEM_PHYS_BASE,
+				    ORION5X_PCI_MEM_SIZE);
 }
 
 int orion5x_tclk;
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index a909afb384fb..f565f9944af2 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -7,6 +7,23 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
+#define ORION_MBUS_PCIE_MEM_TARGET    0x04
+#define ORION_MBUS_PCIE_MEM_ATTR      0x59
+#define ORION_MBUS_PCIE_IO_TARGET     0x04
+#define ORION_MBUS_PCIE_IO_ATTR       0x51
+#define ORION_MBUS_PCIE_WA_TARGET     0x04
+#define ORION_MBUS_PCIE_WA_ATTR       0x79
+#define ORION_MBUS_PCI_MEM_TARGET     0x03
+#define ORION_MBUS_PCI_MEM_ATTR       0x59
+#define ORION_MBUS_PCI_IO_TARGET      0x03
+#define ORION_MBUS_PCI_IO_ATTR        0x51
+#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
+#define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
+#define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
+#define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
+#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_ATTR          0x00
+
 /*
  * Basic Orion init functions used early by machine-setup.
  */
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 16c88bbabc98..8f68b745c1d5 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -317,8 +317,10 @@ static void __init d2net_init(void)
 	d2net_sata_power_init();
 	orion5x_sata_init(&d2net_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
-			      D2NET_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    D2NET_NOR_BOOT_BASE,
+				    D2NET_NOR_BOOT_SIZE);
 	platform_device_register(&d2net_nor_flash);
 
 	platform_device_register(&d2net_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4e1263da38bb..4b2aefd1d961 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -340,19 +340,27 @@ static void __init db88f5281_init(void)
 	orion5x_uart0_init();
 	orion5x_uart1_init();
 
-	mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
-			      DB88F5281_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DB88F5281_NOR_BOOT_BASE,
+				    DB88F5281_NOR_BOOT_SIZE);
 	platform_device_register(&db88f5281_boot_flash);
 
-	mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
-			      DB88F5281_7SEG_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+				    ORION_MBUS_DEVBUS_ATTR(0),
+				    DB88F5281_7SEG_BASE,
+				    DB88F5281_7SEG_SIZE);
 
-	mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
-			      DB88F5281_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    DB88F5281_NOR_BASE,
+				    DB88F5281_NOR_SIZE);
 	platform_device_register(&db88f5281_nor_flash);
 
-	mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
-			      DB88F5281_NAND_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
+				    ORION_MBUS_DEVBUS_ATTR(2),
+				    DB88F5281_NAND_BASE,
+				    DB88F5281_NAND_SIZE);
 	platform_device_register(&db88f5281_nand_flash);
 
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e6baf581ed3..70974732cbf0 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -611,8 +611,10 @@ static void __init dns323_init(void)
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
-			      DNS323_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DNS323_NOR_BOOT_BASE,
+				    DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
 	/* Sort out LEDs, Buttons and i2c devices */
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 147615510dd0..f66c1b2ee8c1 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
+#include <linux/mbus.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -96,14 +96,6 @@ static struct platform_device edmini_v2_nor_flash = {
 };
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
  * RTC 5C372a on I2C bus
  ****************************************************************************/
 
@@ -152,10 +144,11 @@ void __init edmini_v2_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
-	orion5x_eth_init(&edmini_v2_eth_data);
 
-	mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
-			      EDMINI_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    EDMINI_V2_NOR_BOOT_BASE,
+				    EDMINI_V2_NOR_BOOT_SIZE);
 	platform_device_register(&edmini_v2_nor_flash);
 
 	pr_notice("edmini_v2: USB device port, flash write and power-off "
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index aae10e4a917c..fe6a48a325e8 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -359,13 +359,17 @@ static void __init kurobox_pro_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
-			      KUROBOX_PRO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    KUROBOX_PRO_NOR_BOOT_BASE,
+				    KUROBOX_PRO_NOR_BOOT_SIZE);
 	platform_device_register(&kurobox_pro_nor_flash);
 
 	if (machine_is_kurobox_pro()) {
-		mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
-				      KUROBOX_PRO_NAND_SIZE);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+					    ORION_MBUS_DEVBUS_ATTR(0),
+					    KUROBOX_PRO_NAND_BASE,
+					    KUROBOX_PRO_NAND_SIZE);
 		platform_device_register(&kurobox_pro_nand_flash);
 	}
 
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 6234977b5aea..028ea038d404 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -294,8 +294,10 @@ static void __init lschl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
-			      LSCHL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSCHL_NOR_BOOT_BASE,
+				    LSCHL_NOR_BOOT_SIZE);
 	platform_device_register(&lschl_nor_flash);
 
 	platform_device_register(&lschl_leds);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index fe04c4b64569..32b7129b767d 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -243,8 +243,10 @@ static void __init ls_hgl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
-			      LS_HGL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LS_HGL_NOR_BOOT_BASE,
+				    LS_HGL_NOR_BOOT_SIZE);
 	platform_device_register(&ls_hgl_nor_flash);
 
 	platform_device_register(&ls_hgl_button_device);
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index ca4dbe973daf..a6493e76f96d 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -244,8 +244,10 @@ static void __init lsmini_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
-			      LSMINI_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSMINI_NOR_BOOT_BASE,
+				    LSMINI_NOR_BOOT_SIZE);
 	platform_device_register(&lsmini_nor_flash);
 
 	platform_device_register(&lsmini_button_device);
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 827acbafc9dc..e105130ba51c 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -241,8 +241,10 @@ static void __init mss2_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
-			      MSS2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MSS2_NOR_BOOT_BASE,
+				    MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
 
 	platform_device_register(&mss2_button_device);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 92600ae2b4b6..e032f01da49e 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -204,8 +204,10 @@ static void __init mv2120_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
-			      MV2120_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MV2120_NOR_BOOT_BASE,
+				    MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
 
 	platform_device_register(&mv2120_button_device);
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index dd0641a0d074..ba73dc7ffb9e 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -397,8 +397,10 @@ static void __init net2big_init(void)
 	net2big_sata_power_init();
 	orion5x_sata_init(&net2big_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
-			      NET2BIG_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    NET2BIG_NOR_BOOT_BASE,
+				    NET2BIG_NOR_BOOT_SIZE);
 	platform_device_register(&net2big_nor_flash);
 
 	platform_device_register(&net2big_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 503368023bb1..7fab67053030 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -157,11 +157,10 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
 				   "read transaction workaround\n");
-		mvebu_mbus_add_window_remap_flags("pcie0.0",
-						  ORION5X_PCIE_WA_PHYS_BASE,
-						  ORION5X_PCIE_WA_SIZE,
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_WA);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
+					    ORION_MBUS_PCIE_WA_ATTR,
+					    ORION5X_PCIE_WA_PHYS_BASE,
+					    ORION5X_PCIE_WA_SIZE);
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 1c4498bf650a..213b3e143c57 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -123,8 +123,10 @@ static void __init rd88f5181l_fxo_init(void)
 	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
-			      RD88F5181L_FXO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_FXO_NOR_BOOT_BASE,
+				    RD88F5181L_FXO_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
 }
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index adabe34c4fc6..594800e1d691 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -130,8 +130,10 @@ static void __init rd88f5181l_ge_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
-			      RD88F5181L_GE_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_GE_NOR_BOOT_BASE,
+				    RD88F5181L_GE_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
 
 	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 66e77ec91532..b1cf68493ffc 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -264,11 +264,14 @@ static void __init rd88f5182_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
-			      RD88F5182_NOR_BOOT_SIZE);
-
-	mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
-			      RD88F5182_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5182_NOR_BOOT_BASE,
+				    RD88F5182_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    RD88F5182_NOR_BASE,
+				    RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
 	platform_device_register(&rd88f5182_gpio_leds);
 
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a0bfa53e7556..7e9064844698 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -329,8 +329,10 @@ static void __init tsp2_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
-			      TSP2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    TSP2_NOR_BOOT_BASE,
+				    TSP2_NOR_BOOT_SIZE);
 	platform_device_register(&tsp2_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 80174f0f168e..e90c0618fdad 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -286,8 +286,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
-			      QNAP_TS209_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS209_NOR_BOOT_BASE,
+				    QNAP_TS209_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts209_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92592790d6da..5c079d312015 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -277,8 +277,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
-			      QNAP_TS409_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS409_NOR_BOOT_BASE,
+				    QNAP_TS409_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts409_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 6b84863c018d..80a56ee245b3 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -127,8 +127,10 @@ static void __init wnr854t_init(void)
 	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
-			      WNR854T_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WNR854T_NOR_BOOT_BASE,
+				    WNR854T_NOR_BOOT_SIZE);
 	platform_device_register(&wnr854t_nor_flash);
 }
 
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index fae684bc54f2..670e30dc0d1b 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -213,8 +213,10 @@ static void __init wrt350n_v2_init(void)
 	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
-			      WRT350N_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WRT350N_V2_NOR_BOOT_BASE,
+				    WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
 	platform_device_register(&wrt350n_v2_leds);
 	platform_device_register(&wrt350n_v2_button_device);
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index e110b6d4ae8c..d49aff74de98 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <asm/sizes.h>
@@ -21,13 +20,6 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
-static __init void sirfsoc_init_time(void)
-{
-	/* initialize clocking early, we want to set the OS timer */
-	sirfsoc_of_clk_init();
-	clocksource_of_init();
-}
-
 static __init void sirfsoc_map_io(void)
 {
 	sirfsoc_map_lluart();
@@ -43,7 +35,6 @@ static const char *atlas6_dt_match[] __initdata = {
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
 	.restart	= sirfsoc_restart,
@@ -59,7 +50,6 @@ static const char *prima2_dt_match[] __initdata = {
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2_dt_match,
@@ -77,7 +67,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,
 	.restart	= sirfsoc_restart,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index a6304858474a..4b768060a858 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
 extern void sirfsoc_restart(enum reboot_mode, const char *);
 extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 02cc34388b05..c4525a88e5da 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -34,7 +34,10 @@ static void sirfsoc_set_wakeup_source(void)
 	pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
 		SIRFSOC_PWRC_TRIGGER_EN);
 #define X_ON_KEY_B (1 << 0)
-	sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+#define RTC_ALARM0_B (1 << 2)
+#define RTC_ALARM1_B (1 << 3)
+	sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B |
+		RTC_ALARM0_B | RTC_ALARM1_B,
 		sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
 }
 
@@ -85,12 +88,6 @@ static const struct platform_suspend_ops sirfsoc_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-int __init sirfsoc_pm_init(void)
-{
-	suspend_set_ops(&sirfsoc_pm_ops);
-	return 0;
-}
-
 static const struct of_device_id pwrc_ids[] = {
 	{ .compatible = "sirf,prima2-pwrc" },
 	{}
@@ -118,7 +115,6 @@ static int __init sirfsoc_of_pwrc_init(void)
 
 	return 0;
 }
-postcore_initcall(sirfsoc_of_pwrc_init);
 
 static const struct of_device_id memc_ids[] = {
 	{ .compatible = "sirf,prima2-memc" },
@@ -149,4 +145,11 @@ static int __init sirfsoc_memc_init(void)
 {
 	return platform_driver_register(&sirfsoc_memc_driver);
 }
-postcore_initcall(sirfsoc_memc_init);
+
+int __init sirfsoc_pm_init(void)
+{
+	sirfsoc_of_pwrc_init();
+	sirfsoc_memc_init();
+	suspend_set_ops(&sirfsoc_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a8427115ee07..96100dbf5a2e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -615,14 +615,12 @@ endmenu
 config PXA25x
 	bool
 	select CPU_XSCALE
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA21x/25x/26x variants
 
 config PXA27x
 	bool
 	select CPU_XSCALE
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA27x variants
 
@@ -635,7 +633,6 @@ config CPU_PXA26x
 config PXA3xx
 	bool
 	select CPU_XSC3
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA3xx variants
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 8091aac89edf..f9423493ed36 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -29,7 +29,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <linux/mfd/da903x.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3a3362fa793e..8eb4e23c561d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,7 +30,7 @@
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 13e5b00eae90..3133ba82c508 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -408,7 +408,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
 	.mclk_10khz = 1000,
 };
 
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
 	.gpio_base	= PXA_NR_BUILTIN_GPIO,
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 3835979a0dd3..f6a2c4b1c1dc 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
 	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-gpio",		0x40e00000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
 	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
 	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
 	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4c29173026e8..0b11c1af51c4 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -20,7 +20,7 @@
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 04a0aea23873..b19d1c361cab 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,7 +26,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/apm-emulation.h>
 #include <linux/can/platform/mcp251x.h>
 #include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 86e59c043de2..869bce7c3f24 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d210c0f9c2c4..9db2029aa632 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -13,7 +13,7 @@ config REALVIEW_EB_A9MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -26,7 +26,7 @@ config REALVIEW_EB_ARM11MP
 	select ARCH_HAS_BARRIERS if SMP
 	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -48,7 +48,7 @@ config MACH_REALVIEW_PB11MP
 	select ARM_GIC
 	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -92,7 +92,7 @@ config MACH_REALVIEW_PBX
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 25ee12b21f01..cf073dea5784 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,12 +5,13 @@ config ARCH_ROCKCHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
 	  containing the RK2928, RK30xx and RK31xx series.
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 724d2d81f976..82c0b0709712 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -19,18 +19,10 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 
-static void __init rockchip_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init rockchip_dt_init(void)
 {
 	l2x0_of_init(0, ~0UL);
@@ -47,6 +39,5 @@ static const char * const rockchip_board_dt_compat[] = {
 
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.init_machine	= rockchip_dt_init,
-	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7791ac76f945..8f1d327e0cd1 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,9 +28,9 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -42,7 +42,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -54,7 +53,6 @@ config CPU_S3C2416
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -65,7 +63,6 @@ config CPU_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -74,8 +71,8 @@ config CPU_S3C2442
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -91,7 +88,6 @@ config CPU_S3C2443
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -154,7 +150,6 @@ config S3C2410_DMA_DEBUG
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
 
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 564553694b54..d39d3c787580 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -281,6 +281,5 @@ int __init s3c2410_baseclk_add(void)
 	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
 	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
-	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index 2cc017da88fe..11b3b28457bb 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA3,
@@ -757,6 +757,5 @@ int __init s3c2412_baseclk_add(void)
 	}
 
 	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 036056cea57c..d421a72920a5 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -168,6 +168,4 @@ void __init s3c2416_init_clocks(int xtal)
 	s3c24xx_register_clock(&hsmmc0_clk);
 	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
 
-	s3c_pwmclk_init();
-
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index 0a53051b0787..76cd31f7804e 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -209,6 +209,4 @@ void __init s3c2443_init_clocks(int xtal)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index f6b9f2ef01bd..65d3eef73090 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA3,
 	}, {
-		.name		= "dma",
+		.name		= "dma.4",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA4,
 	}, {
-		.name		= "dma",
+		.name		= "dma.5",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103ed8eb..4adaa4b43ffe 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,9 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -43,12 +45,14 @@
 
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
+#include <plat/pwm-core.h>
 
 #include "common.h"
 
@@ -216,6 +220,13 @@ static void s3c24xx_default_idle(void)
 		     S3C2410_CLKCON);
 }
 
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= (1 << 4),
+};
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
 	arm_pm_idle = s3c24xx_default_idle;
@@ -232,6 +243,24 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
+}
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c24xx_pwm_variant);
 }
 
 /* Serial port registrations */
@@ -302,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
 }
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2410_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2410_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2410_dma_platdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2412_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(6, 1) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+						   S3C24XX_DMA_CHANREQ(0, 2),
+	},
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+						  S3C24XX_DMA_CHANREQ(5, 2),
+	},
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+						  S3C24XX_DMA_CHANREQ(6, 3),
+	},
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+						  S3C24XX_DMA_CHANREQ(5, 3),
+	},
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2440_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2440_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2440_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.channels = s3c2443_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2443_dma_platdata,
+	},
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 84b280654f4c..e46c10417216 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void);
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 8ba381f2dbe1..444793f0f5f1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -167,4 +167,6 @@
 #define S3C_PA_SPI0		S3C2443_PA_SPI0
 #define S3C_PA_SPI1		S3C2443_PA_SPI1
 
+#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index af4334d6b4d5..74dd47988b41 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -512,7 +512,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 static struct platform_device h1940_backlight = {
 	.name = "pwm-backlight",
 	.dev  = {
-		.parent = &s3c_device_timer[0].dev,
+		.parent = &samsung_device_pwm.dev,
 		.platform_data = &backlight_data,
 	},
 	.id   = -1,
@@ -632,7 +632,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&h1940_device_bluetooth,
 	&s3c_device_sdi,
 	&s3c_device_rtc,
-	&s3c_device_timer[0],
+	&samsung_device_pwm,
 	&h1940_backlight,
 	&h1940_lcd_powerdev,
 	&s3c_device_adc,
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index a45fcd8ccf79..43c23e220f5b 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = {
 	&jive_device_wm8750,
 	&s3c_device_nand,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 44ca018e1f96..206b1f7546d1 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -530,7 +530,7 @@ static struct platform_pwm_backlight_data rx1950_backlight_data = {
 static struct platform_device rx1950_backlight = {
 	.name = "pwm-backlight",
 	.dev = {
-		.parent = &s3c_device_timer[0].dev,
+		.parent = &samsung_device_pwm.dev,
 		.platform_data = &rx1950_backlight_data,
 	},
 };
@@ -717,8 +717,7 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_adc,
 	&s3c_device_ts,
-	&s3c_device_timer[0],
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
 	&power_supply,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 8146e920f10d..c9d31ef28dd1 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index cb46847c66b4..f88e672ad1e4 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_usb_hsudc,
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2416_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 9435c3bef18a..d9933fcc6cc8 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b66588428ec9..f7ec9c550787 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c2412_device_dma,
 };
 
 static void __init vstms_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 20578536aec7..2cb8dc55b50e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -3,27 +3,16 @@
 #
 # Licensed under GPLv2
 
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select PM_GENERIC_DOMAINS
-	select SAMSUNG_WAKEMASK
-	help
-	  Base platform code for any Samsung S3C64XX device
-
+if ARCH_S3C64XX
 
 # Configuration options for the S3C6410 CPU
 
 config CPU_S3C6400
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6400 CPU support
 
 config CPU_S3C6410
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6410 CPU support
@@ -308,3 +297,21 @@ config MACH_WLF_CRAGG_6410
 	select SAMSUNG_GPIO_EXTRA128
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+	select CLKSRC_OF
+	select CPU_S3C6400
+	select CPU_S3C6410
+	select PINCTRL
+	select PINCTRL_S3C64XX
+	select USE_OF
+	help
+	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+	  enabled.
+	  Select this if a fdt blob is available for your S3C64XX SoC based
+	  board.
+	  Note: This is under development and not all peripherals can be
+	  supported with this machine file.
+
+endif
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c9101272..6faedcffce04 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core
 
-obj-y				+= common.o clock.o
+obj-y				+= common.o
 
 # Core support
 
@@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
 obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index 8499415be9cd..000000000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1009 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.rate		= 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.devname        = "s3c2440-i2c.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_I2C1,
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}, {
-		.name		= "dma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	}, {
-		.name		= "3dse",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
-	}, {
-		.name		= "hclk_secur",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
-	}, {
-		.name		= "sdma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
-	}, {
-		.name		= "sdma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
-	}, {
-		.name		= "hclk_jpeg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
-	}, {
-		.name		= "camif",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
-	}, {
-		.name		= "hclk_scaler",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
-	}, {
-		.name		= "2d",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_2D,
-	}, {
-		.name		= "tv",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_TV,
-	}, {
-		.name		= "post0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
-	}, {
-		.name		= "rot",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
-	}, {
-		.name		= "hclk_mfc",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
-	}, {
-		.name		= "pclk_mfc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
-	}, {
-		.name		= "dac27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
-	}, {
-		.name		= "tv27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
-	}, {
-		.name		= "scaler27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
-	}, {
-		.name		= "sclk_scaler",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
-	}, {
-		.name		= "post0_27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
-	}, {
-		.name		= "secur",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
-	}, {
-		.name		= "sclk_mfc",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
-	}, {
-		.name		= "sclk_jpeg",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
-	},
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.0",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.1",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.0",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.1",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.2",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "otg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_USB,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c64xx_clk_arm_get_rate,
-		.set_rate	= s3c64xx_clk_arm_set_rate,
-		.round_rate	= s3c64xx_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.parent		= &clk_mout_mpll.clk,
-	.ops		= &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
-	.name		= "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iisv4_cd,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "usb-bus-host",
-			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
-		.sources	= &clkset_uhost,
-	}, {
-		.clk	= {
-			.name		= "irda-bus",
-			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
-		.sources	= &clkset_irda,
-	}, {
-		.clk	= {
-			.name		= "camera",
-			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-			.enable		= s3c64xx_sclk_ctrl,
-			.parent		= &clk_h2,
-		},
-		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
-	},
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-	.sources	= &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
-	.sources	= &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
-	.sources	= &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.2",
-		.ctrlbit	= S3C6410_CLKCON_SCLK_AUDIO2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
-	.sources	= &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_audio_bus0,
-	&clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_i2s0,
-	&clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
-		/* Synchronous mode */
-		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	else
-		/* Asynchronous mode */
-		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iisv4_cd,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-	&clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal, 
-				    unsigned armclk_divlimit)
-{
-	unsigned int cnt;
-
-	armclk_mask = armclk_divlimit;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
-		s3c_disable_clocks(clk_cdev[cnt], 1);
-
-	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
-		s3c_register_clksrc(clksrc_cdev[cnt], 1);
-	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3f62e467b129..7a3ce4c39e5f 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -14,9 +14,14 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
@@ -27,6 +32,7 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,18 +43,30 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
 #include <plat/irq-uart.h>
-#include <plat/irq-vic-timer.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"
 
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
 /* uart registration process */
 
 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -66,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6400_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
@@ -74,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6410_init,
 		.name		= name_s3c6410,
@@ -149,6 +165,30 @@ static struct device s3c64xx_dev = {
 	.bus	= &s3c64xx_subsys,
 };
 
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c64xx_pwm_variant);
+}
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -161,10 +201,16 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	s3c64xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
 }
 
 static __init int s3c64xx_dev_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	subsys_system_register(&s3c64xx_subsys, NULL);
 	return device_register(&s3c64xx_dev);
 }
@@ -186,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 {
 	/*
 	 * FIXME: there is no better place to put this at the moment
-	 * (samsung_wdt_reset_init needs clocks)
+	 * (s3c64xx_clk_init needs ioremap and must happen before init_time
+	 * samsung_wdt_reset_init needs clocks)
 	 */
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -195,9 +243,6 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	/* initialise the pair of VICs */
 	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
 	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
@@ -367,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;
 
+	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b37665..bd3bd562011e 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
 void s3c64xx_init_irq(u32 vic0, u32 vic1);
 void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 void s3c64xx_init_late(void);
 
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
 extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
 
 #else
-#define s3c6400_init_clocks NULL
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
@@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal);
 extern  int s3c6410_init(void);
 extern void s3c6410_init_irq(void);
 extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
 
 #else
-#define s3c6410_init_clocks NULL
 #define s3c6410_map_io NULL
 #define s3c6410_init NULL
 #endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c28d12..7e22c2113816 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -12,6 +12,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -24,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/amba/pl080.h>
+#include <linux/of.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
@@ -677,7 +682,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		goto err_map;
 	}
 
-	clk_enable(dmac->clk);
+	clk_prepare_enable(dmac->clk);
 
 	dmac->regs = regs;
 	dmac->chanbase = chbase;
@@ -711,7 +716,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 	return 0;
 
 err_clk:
-	clk_disable(dmac->clk);
+	clk_disable_unprepare(dmac->clk);
 	clk_put(dmac->clk);
 err_map:
 	iounmap(regs);
@@ -726,6 +731,10 @@ static int __init s3c64xx_dma_init(void)
 {
 	int ret;
 
+	/* This driver is not supported when booting with device tree. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
 	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 96d60e0d9372..67bbd1dd04c2 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -107,14 +107,6 @@
 #define IRQ_TC			IRQ_PENDN
 #define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
 
-#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
-
 /* compatibility for device defines */
 
 #define IRQ_IIC1		IRQ_S3C6410_IIC1
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 8e2097bb208a..f55ccb1ce893 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -121,5 +121,6 @@
 #define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
 #define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
 #define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER	S3C64XX_PA_TIMER
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b998ec0..4f44aac77092 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
+/*
+ * FIXME: Remove remaining definitions
+ */
+
 #define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
 
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
 #define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
 /* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
 #define S3C_CLKCON_PCLK_UART3		(1<<4)
 #define S3C_CLKCON_PCLK_UART2		(1<<3)
 #define S3C_CLKCON_PCLK_UART1		(1<<2)
 #define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
 
 /* MEM_SYS_CFG */
 #define MEM_SYS_CFG_INDEP_CF		0x4000
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 0c7e1d960ca4..1649c0d1c1b8 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -12,17 +12,21 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
 #include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -43,7 +47,6 @@ static struct sleep_save irq_save[] = {
 	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
 	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
 	SAVE_ITEM(S3C64XX_EINT0MASK),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
 };
 
 static struct irq_grp_save {
@@ -103,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
 
 static __init int s3c64xx_syscore_init(void)
 {
+	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);
 
 	return 0;
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54574ef..d266dd5f7060 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = {
 static void __init anw6410_map_io(void)
 {
 	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ad88ace795a..aca7d16e195d 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -30,7 +30,7 @@
 #include <linux/basic_mmio_gpio.h>
 #include <linux/spi/spi.h>
 
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <video/platform_lcd.h>
@@ -120,7 +120,7 @@ static struct platform_device crag6410_backlight_device = {
 	.name		= "pwm-backlight",
 	.id		= -1,
 	.dev		= {
-		.parent	= &s3c_device_timer[0].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &crag6410_backlight_data,
 	},
 };
@@ -310,10 +310,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 
 	REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
 	REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
-	REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"),
-	REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"),
-	REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"),
-	REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"),
 
 	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
 	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
@@ -375,7 +371,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
-	&s3c_device_timer[0],
+	&samsung_device_pwm,
 	&s3c64xx_device_iis0,
 	&s3c64xx_device_iis1,
 	&samsung_device_keypad,
@@ -653,14 +649,6 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
 	REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
 	REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
 	REGULATOR_SUPPLY("CPVDD", "spi0.1"),
-
-	REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"),
-	REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"),
-	REGULATOR_SUPPLY("CPVDD", "wm5102-codec"),
-
-	REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"),
-	REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"),
-	REGULATOR_SUPPLY("CPVDD", "wm5110-codec"),
 };
 
 static struct regulator_init_data pvdd_1v8 = {
@@ -743,7 +731,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = {
 static void __init crag6410_map_io(void)
 {
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 5b7f357d8c22..e8064044ef79 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -123,7 +123,7 @@ static struct platform_pwm_backlight_data hmt_backlight_data = {
 static struct platform_device hmt_backlight_device = {
 	.name		= "pwm-backlight",
 	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &hmt_backlight_data,
 	},
 };
@@ -239,7 +239,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 	&s3c_device_nand,
 	&s3c_device_fb,
 	&s3c_device_ohci,
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&hmt_backlight_device,
 	&hmt_leds_device,
 };
@@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 static void __init hmt_map_io(void)
 {
 	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3ecdf8..58d46a3d7b78 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@ static void __init mini6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c3908f1f8..2067b0bf55b4 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {};
 static void __init ncp_map_io(void)
 {
 	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
new file mode 100644
index 000000000000..7eb9a10fc1af
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <plat/watchdog-reset.h>
+
+#include <mach/map.h>
+
+#include "common.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+	s3c64xx_init_cpu();
+
+	if (!soc_is_s3c64xx())
+		panic("SoC is not S3C64xx!");
+}
+
+static void __init s3c64xx_dt_init_irq(void)
+{
+	of_clk_init(NULL);
+	samsung_wdt_reset_of_init();
+	irqchip_init();
+};
+
+static void __init s3c64xx_dt_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (mode != REBOOT_SOFT)
+		samsung_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	soft_restart(0);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+	"samsung,s3c6400",
+	"samsung,s3c6410",
+	NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+	.dt_compat	= s3c64xx_dt_compat,
+	.map_io		= s3c64xx_dt_map_io,
+	.init_irq	= s3c64xx_dt_init_irq,
+	.init_machine	= s3c64xx_dt_init_machine,
+	.restart        = s3c64xx_dt_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 58ac99041274..0f47237be3b2 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -157,7 +157,7 @@ static struct platform_pwm_backlight_data smartq_backlight_data = {
 static struct platform_device smartq_backlight_device = {
 	.name		= "pwm-backlight",
 	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &smartq_backlight_data,
 	},
 };
@@ -246,7 +246,7 @@ static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_ohci,
 	&s3c_device_rtc,
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iis0,
@@ -337,13 +337,6 @@ err:
 	return ret;
 }
 
-static int __init smartq_usb_otg_init(void)
-{
-	clk_xusbxti.rate = 12000000;
-
-	return 0;
-}
-
 static int __init smartq_wifi_init(void)
 {
 	int ret;
@@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {};
 void __init smartq_map_io(void)
 {
 	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c64xx_set_xusbxti_freq(12000000);
 	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -399,7 +393,6 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_lcd_setup_gpio());
 	WARN_ON(smartq_power_off_init());
 	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_usb_otg_init());
 	WARN_ON(smartq_wifi_init());
 
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c0843aea2..27381cfcabbe 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {};
 static void __init smdk6400_map_io(void)
 {
 	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index bd3295a19ad7..2a7b32ca5c96 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -274,6 +274,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&s3c_device_ohci,
+	&samsung_device_pwm,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iisv4,
 	&samsung_device_keypad,
@@ -633,7 +634,7 @@ static void __init smdk6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -691,9 +692,9 @@ static void __init smdk6410_machine_init(void)
 
 	s3c_ide_set_platdata(&smdk6410_ide_pdata);
 
-	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+
+	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91fea678..8cdb824a3b43 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear)
 #endif
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
 	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
 };
 
 static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714c6f1b..3db0c98222f7 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -9,6 +9,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -20,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,12 +63,6 @@ void __init s3c6400_map_io(void)
 	s3c64xx_onenand1_setname("s3c6400-onenand");
 }
 
-void __init s3c6400_init_clocks(int xtal)
-{
-	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6400_init_irq(void)
 {
 	/* VIC0 does not have IRQS 5..7,
@@ -82,6 +81,10 @@ static struct device s3c6400_dev = {
 
 static int __init s3c6400_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6400_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fdf1800..72b2278953a8 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -10,6 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -21,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -62,13 +67,6 @@ void __init s3c6410_map_io(void)
 	s3c_cfcon_setname("s3c64xx-pata");
 }
 
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6410_init_irq(void)
 {
 	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
@@ -86,6 +84,10 @@ static struct device s3c6410_dev = {
 
 static int __init s3c6410_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6410_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 5a707bdb9ea0..bb2111b3751e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,14 +11,12 @@ config CPU_S5P6440
 	bool
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select SAMSUNG_HRT
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 3537815247f1..ae34a1d5e10a 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -629,6 +629,4 @@ void __init s5p6440_register_clocks(void)
 	clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index af384ddd2dcf..0b3ca2ed53e9 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -698,6 +698,4 @@ void __init s5p6450_register_clocks(void)
 	clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index dfdfdc320ce7..42e14f2e7ca7 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -47,6 +48,7 @@
 #include <plat/fb-core.h>
 #include <plat/spi-core.h>
 #include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -157,6 +159,30 @@ static void s5p64x0_idle(void)
 	cpu_do_idle();
 }
 
+static struct samsung_pwm_variant s5p64x0_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5p64x0_pwm_variant);
+}
+
 /*
  * s5p64x0_map_io
  *
@@ -176,6 +202,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
+	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
 void __init s5p6440_map_io(void)
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5b845e849b30..53982db9d259 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,8 +141,6 @@
 
 #define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
 
-#define IRQ_TIMER_BASE		(11)
-
 /* Set the default NR_IRQS */
 
 #define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 0c0175dbfa34..50a6e96d6389 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -76,6 +76,7 @@
 #define S5P_PA_TIMER		S5P64X0_PA_TIMER
 
 #define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+#define SAMSUNG_PA_TIMER	S5P64X0_PA_TIMER
 
 /* UART */
 
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 73f71a698a34..0b00304c1e91 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -162,6 +162,7 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&s5p6440_device_iis,
@@ -254,8 +255,6 @@ static void __init smdk6440_machine_init(void)
 	i2c_register_board_info(1, smdk6440_i2c_devs1,
 			ARRAY_SIZE(smdk6440_i2c_devs1));
 
-	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-
 	s5p6440_set_lcd_interface();
 	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
 
@@ -264,6 +263,8 @@ static void __init smdk6440_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
 
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+
+	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 }
 
 MACHINE_START(SMDK6440, "SMDK6440")
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 18303e12019f..5949296e88fd 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -180,6 +180,7 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&s5p6450_device_iis0,
@@ -273,8 +274,6 @@ static void __init smdk6450_machine_init(void)
 	i2c_register_board_info(1, smdk6450_i2c_devs1,
 			ARRAY_SIZE(smdk6450_i2c_devs1));
 
-	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-
 	s5p6450_set_lcd_interface();
 	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
 
@@ -283,6 +282,8 @@ static void __init smdk6450_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
 
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+
+	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 }
 
 MACHINE_START(SMDK6450, "SMDK6450")
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 97c2a08ad490..861e15cea691 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -18,7 +18,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-timer.h>
 #include <plat/wakeup-mask.h>
 
 #include <mach/regs-clock.h>
@@ -48,8 +47,6 @@ static struct sleep_save s5p64x0_misc_save[] = {
 	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
 	SAVE_ITEM(S5P64X0_MEM0DRVCON),
 	SAVE_ITEM(S5P64X0_MEM1DRVCON),
-
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
 };
 
 /* DPLL is present only in S5P6450 */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 2f456a4533ba..15170be97a74 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,7 +11,6 @@ config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index a206dc35eff1..d0dc10ee7729 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -1358,6 +1358,4 @@ void __init s5pc100_register_clocks(void)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 4bdfecf6d024..c5a8eeacf81c 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/reboot.h>
@@ -46,6 +47,7 @@
 #include <plat/fb-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
+#include <plat/pwm-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -132,6 +134,30 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 	}
 };
 
+static struct samsung_pwm_variant s5pc100_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pc100_pwm_variant);
+}
+
 /*
  * s5pc100_map_io
  *
@@ -149,6 +175,8 @@ void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pc100_pwm_variant);
 }
 
 void __init s5pc100_map_io(void)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 2870f12c7926..d2eb4757381f 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,8 +97,6 @@
 #define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
 #define IRQ_VIC_END		S5P_IRQ_VIC2(31)
 
-#define IRQ_TIMER_BASE		(11)
-
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 54bc4f82e17a..2550b6112b82 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -116,6 +116,7 @@
 #define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
 #define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
 #define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define SAMSUNG_PA_TIMER		S5PC100_PA_TIMER
 
 #define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
 
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 8c880f76f274..7c57a221785e 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -194,6 +194,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&smdkc100_lcd_powerdev,
@@ -246,9 +247,9 @@ static void __init smdkc100_machine_init(void)
 	gpio_request(S5PC100_GPH0(6), "GPH0");
 	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 
-	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+
+	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0963283a7c5d..caaedafbbf5f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,7 +15,6 @@ config CPU_S5PV210
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f051f53e35b7..ca463724a3df 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -1362,5 +1362,4 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 023f1a796a9c..26027a29b8a1 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/device.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -42,6 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/keypad-core.h>
+#include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
@@ -148,6 +150,30 @@ void s5pv210_restart(enum reboot_mode mode, const char *cmd)
 	__raw_writel(0x1, S5P_SWRESET);
 }
 
+static struct samsung_pwm_variant s5pv210_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pv210_pwm_variant);
+}
+
 /*
  * s5pv210_map_io
  *
@@ -165,6 +191,8 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pv210_pwm_variant);
 }
 
 void __init s5pv210_map_io(void)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index e777e010ed2e..5e0de3a31f3d 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,8 +118,6 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
-#define IRQ_TIMER_BASE		(11)
-
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index b7c8a1917ffc..763929aca52d 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -139,6 +139,7 @@
 #define SAMSUNG_PA_ADC			S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON		S5PV210_PA_CFCON
 #define SAMSUNG_PA_KEYPAD		S5PV210_PA_KEYPAD
+#define SAMSUNG_PA_TIMER		S5PV210_PA_TIMER
 
 /* UART */
 
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66fb8be..e345584d4c34 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index d50b6f124465..6d72bb992e38 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -218,6 +218,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_i2c2,
+	&samsung_device_pwm,
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
@@ -316,11 +317,11 @@ static void __init smdkv210_machine_init(void)
 
 	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
 
-	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
-
 	s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
 
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+
+	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
 }
 
 MACHINE_START(SMDKV210, "SMDKV210")
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 2b68a67b6e95..3cf3f9c8ddd1 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -21,7 +21,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-timer.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-clock.h>
@@ -77,15 +76,6 @@ static struct sleep_save s5pv210_core_save[] = {
 	/* Clock ETC */
 	SAVE_ITEM(S5P_CLK_OUT),
 	SAVE_ITEM(S5P_MDNIE_SEL),
-
-	/* PWM Register */
-	SAVE_ITEM(S3C2410_TCFG0),
-	SAVE_ITEM(S3C2410_TCFG1),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-	SAVE_ITEM(S3C2410_TCON),
-	SAVE_ITEM(S3C2410_TCNTB(0)),
-	SAVE_ITEM(S3C2410_TCMPB(0)),
-	SAVE_ITEM(S3C2410_TCNTO(0)),
 };
 
 static int s5pv210_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index e838ba27e443..c9808c684152 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -512,6 +512,9 @@ static void __init assabet_map_io(void)
 	 * Its called GPCLKR0 in my SA1110 manual.
 	 */
 	Ser1SDCR0 |= SDCR0_SUS;
+	MSC1 = (MSC1 & ~0xffff) |
+		MSC_NonBrst | MSC_32BitStMem |
+		MSC_RdAcc(2) | MSC_WrAcc(2) | MSC_Rec(0);
 
 	if (!machine_has_neponset())
 		sa1100_register_uart_fns(&assabet_port_fns);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 612a45689770..7fb96ebdc0fb 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -289,7 +289,7 @@ static void collie_flash_exit(void)
 }
 
 static struct flash_platform_data collie_flash_data = {
-	.map_name	= "cfi_probe",
+	.map_name	= "jedec_probe",
 	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
 	.exit		= collie_flash_exit,
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index f25b6119e028..d4ea142c4edd 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -42,74 +42,31 @@ EXPORT_SYMBOL(reset_status);
 /*
  * This table is setup for a 3.6864MHz Crystal.
  */
-static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
-	 590,	/*  59.0 MHz */
-	 737,	/*  73.7 MHz */
-	 885,	/*  88.5 MHz */
-	1032,	/* 103.2 MHz */
-	1180,	/* 118.0 MHz */
-	1327,	/* 132.7 MHz */
-	1475,	/* 147.5 MHz */
-	1622,	/* 162.2 MHz */
-	1769,	/* 176.9 MHz */
-	1917,	/* 191.7 MHz */
-	2064,	/* 206.4 MHz */
-	2212,	/* 221.2 MHz */
-	2359,	/* 235.9 MHz */
-	2507,	/* 250.7 MHz */
-	2654,	/* 265.4 MHz */
-	2802	/* 280.2 MHz */
+struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
+	{ .frequency = 59000,	/*  59.0 MHz */},
+	{ .frequency = 73700,	/*  73.7 MHz */},
+	{ .frequency = 88500,	/*  88.5 MHz */},
+	{ .frequency = 103200,	/* 103.2 MHz */},
+	{ .frequency = 118000,	/* 118.0 MHz */},
+	{ .frequency = 132700,	/* 132.7 MHz */},
+	{ .frequency = 147500,	/* 147.5 MHz */},
+	{ .frequency = 162200,	/* 162.2 MHz */},
+	{ .frequency = 176900,	/* 176.9 MHz */},
+	{ .frequency = 191700,	/* 191.7 MHz */},
+	{ .frequency = 206400,	/* 206.4 MHz */},
+	{ .frequency = 221200,	/* 221.2 MHz */},
+	{ .frequency = 235900,	/* 235.9 MHz */},
+	{ .frequency = 250700,	/* 250.7 MHz */},
+	{ .frequency = 265400,	/* 265.4 MHz */},
+	{ .frequency = 280200,	/* 280.2 MHz */},
+	{ .frequency = CPUFREQ_TABLE_END, },
 };
 
-/* rounds up(!)  */
-unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
-{
-	int i;
-
-	khz /= 100;
-
-	for (i = 0; i < NR_FREQS; i++)
-		if (cclk_frequency_100khz[i] >= khz)
-			break;
-
-	return i;
-}
-
-unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
-{
-	unsigned int freq = 0;
-	if (idx < NR_FREQS)
-		freq = cclk_frequency_100khz[idx] * 100;
-	return freq;
-}
-
-
-/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
- * this platform, anyway.
- */
-int sa11x0_verify_speed(struct cpufreq_policy *policy)
-{
-	unsigned int tmp;
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	/* make sure that at least one frequency is within the policy */
-	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
-	if (tmp > policy->max)
-		policy->max = tmp;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
 unsigned int sa11x0_getspeed(unsigned int cpu)
 {
 	if (cpu)
 		return 0;
-	return cclk_frequency_100khz[PPCR & 0xf] * 100;
+	return sa11x0_freq_table[PPCR & 0xf].frequency;
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 9a33695c9492..0d92e119b36b 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -3,6 +3,7 @@
  *
  * Author: Nicolas Pitre
  */
+#include <linux/cpufreq.h>
 #include <linux/reboot.h>
 
 extern void sa1100_timer_init(void);
@@ -19,12 +20,8 @@ extern void sa11x0_init_late(void);
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
-struct cpufreq_policy;
-
-extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
-extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
+extern struct cpufreq_frequency_table sa11x0_freq_table[];
 extern unsigned int sa11x0_getspeed(unsigned int cpu);
-extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
 
 struct flash_platform_data;
 struct resource;
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
deleted file mode 100644
index 6a9eecf3137e..000000000000
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
index 7d9df16f04a2..c810620db53d 100644
--- a/arch/arm/mach-sa1100/include/mach/h3xxx.h
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -13,6 +13,8 @@
 #ifndef _INCLUDE_H3XXX_H_
 #define _INCLUDE_H3XXX_H_
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 /* Physical memory regions corresponding to chip selects */
 #define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
 #define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index bcbc94540e45..41e476e571d7 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -19,6 +19,7 @@
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
+#include <asm/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
deleted file mode 100644
index 29657183c452..000000000000
--- a/arch/arm/mach-shark/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o dma.o irq.o pci.o leds.o
-obj-m			:=
-obj-n			:=
-obj-			:=
diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot
deleted file mode 100644
index e40e24e4ca34..000000000000
--- a/arch/arm/mach-shark/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x08008000
-
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
deleted file mode 100644
index 1d32c5e8eab6..000000000000
--- a/arch/arm/mach-shark/core.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/arch.c
- *
- *  Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE            0x08000000
-#define ROMCARD_START           0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
-        short temp;
-        /* Reset the Machine via pc[3] of the sequoia chipset */
-        outw(0x09,0x24);
-        temp=inw(0x26);
-        temp = temp | (1<<3) | (1<<10);
-        outw(0x09,0x24);
-        outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 4,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 3,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
-	int ret;
-
-	if (machine_is_shark())
-	{
-	        ret = platform_device_register(&rtc_device);
-		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
-		ret = platform_device_register(&serial_device);
-		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
-	}
-	return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
-	.name		= "Shark Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
-	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
-	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
-	outb(HZ_TIME >> 8, 0x40);
-
-	setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
-	cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
-	/* Maintainer: Alexander Schulz */
-	.atag_offset	= 0x3000,
-	.init_early	= shark_init_early,
-	.init_irq	= shark_init_irq,
-	.init_time	= shark_timer_init,
-	.dma_zone_size	= SZ_4M,
-	.restart	= shark_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
deleted file mode 100644
index 10b5b8b3272a..000000000000
--- a/arch/arm/mach-shark/dma.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/dma.c
- *
- *  by Alexander Schulz
- *
- *  derived from:
- *  arch/arm/kernel/dma-ebsa285.c
- *  Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
-	isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
deleted file mode 100644
index d129119a3f69..000000000000
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x3f8
-		orr	\rv, \rp, #0xfe000000
-		orr	\rv, \rv, #0x00e00000
-		orr	\rp, \rp, #0x40000000
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
deleted file mode 100644
index c9e49f049532..000000000000
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
deleted file mode 100644
index 84a5bf6e5ba3..000000000000
--- a/arch/arm/mach-shark/include/mach/framebuffer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
deleted file mode 100644
index 663f952a8ab3..000000000000
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
deleted file mode 100644
index c8e8a4e1f61a..000000000000
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define IRQ_ISA_RTC_ALARM	 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
deleted file mode 100644
index 96c43b8f8dda..000000000000
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
deleted file mode 100644
index 1cf8d6962617..000000000000
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET     UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
deleted file mode 100644
index bb6eeaebed86..000000000000
--- a/arch/arm/mach-shark/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
deleted file mode 100644
index a168435aecc9..000000000000
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	volatile int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
deleted file mode 100644
index 5dce13e429f3..000000000000
--- a/arch/arm/mach-shark/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = 1 << d->irq;
-	  cached_irq_mask[0] |= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	} else {
-	  mask = 1 << (d->irq-8);
-	  cached_irq_mask[1] |= mask;
-	  outb(cached_irq_mask[0],0x21);
-	}
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = ~(1 << d->irq);
-	  cached_irq_mask[0] &= mask;
-	  outb(cached_irq_mask[0],0x21);
-	} else {
-	  mask = ~(1 << (d->irq-8));
-	  cached_irq_mask[1] &= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	}
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
-	printk("Got interrupt %i!\n",irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
-	.name		= "XT-PIC",
-	.irq_ack	= shark_ack_8259A_irq,
-	.irq_mask	= shark_disable_8259A_irq,
-	.irq_unmask	= shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
-	outb(0x0A, 0x20);
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence, edge triggered */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
-	outb(0x0A, 0xA0);
-	outb(cached_irq_mask[1],0xA1);
-	outb(cached_irq_mask[0],0x21);
-	//request_region(0x20,0x2,"pic1");
-	//request_region(0xA0,0x2,"pic2");
-
-	cascade.handler = bogus_int;
-	cascade.name = "cascade";
-	setup_irq(2,&cascade);
-}
-
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
deleted file mode 100644
index 081c778a10ac..000000000000
--- a/arch/arm/mach-shark/leds.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
-	struct led_classdev cdev;
-	u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} shark_leds[] = {
-	{ "shark:amber0", "default-on", },	/* Bit 5 */
-	{ "shark:green", "heartbeat", },	/* Bit 6 */
-	{ "shark:amber1", "cpu0" },		/* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
-	outw(0x09, 0x24);
-	return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
-	outw(0x09, 0x24);
-	outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
-	int i;
-	u16 reg;
-
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
-		struct shark_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = shark_leds[i].name;
-		led->cdev.brightness_set = shark_led_set;
-		led->cdev.brightness_get = shark_led_get;
-		led->cdev.default_trigger = shark_leds[i].trigger;
-
-		/* Count in 5 bits offset */
-		led->mask = BIT(i + 5);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	/* Make LEDs independent of power-state */
-	request_region(0x24, 4, "led_reg");
-	reg = led_reg_read();
-	reg |= 1 << 10;
-	led_reg_write(reg);
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
deleted file mode 100644
index 6d91a914c1dd..000000000000
--- a/arch/arm/mach-shark/pci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/pci.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START	0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0)
-		if (dev->devfn == 0)
-			return 255;
-		else
-			return 11;
-	else
-		return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
-	.setup		= via82c505_setup,
-	.map_irq	= shark_map_irq,
-	.nr_controllers = 1,
-	.ops		= &via82c505_ops,
-	.preinit	= via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x50000000;
-	vga_base = 0xe8000000;
-
-	pci_ioremap_io(0, IO_START);
-
-	pci_common_init(&shark_pci);
-
-	return 0;
-}
-
-subsys_initcall(shark_pci_init);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3912ce91fee4..a4a4b75109b2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,3 +1,35 @@
+config ARCH_SHMOBILE_MULTI
+	bool "SH-Mobile Series" if ARCH_MULTI_V7
+	depends on MMU
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_SMP
+	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
+	select PINCTRL
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+
+if ARCH_SHMOBILE_MULTI
+
+comment "SH-Mobile System Type"
+
+config ARCH_EMEV2
+	bool "Emma Mobile EV2"
+
+comment "SH-Mobile Board Type"
+
+config MACH_KZM9D
+	bool "KZM9D board"
+	depends on ARCH_EMEV2
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
+comment "SH-Mobile System Configuration"
+endif
+
 if ARCH_SHMOBILE
 
 comment "SH-Mobile System Type"
@@ -23,9 +55,10 @@ config ARCH_R8A73A4
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -59,30 +92,45 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
+config ARCH_R8A7791
+	bool "R-Car M2 (R8A77910)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 
-comment "SH-Mobile Board Type"
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
 
-config MACH_AG5EVM
-	bool "AG5EVM board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SH_LCD_MIPI_DSI
+comment "SH-Mobile Board Type"
 
 config MACH_APE6EVM
 	bool "APE6EVM board"
 	depends on ARCH_R8A73A4
 	select USE_OF
 
+config MACH_APE6EVM_REFERENCE
+	bool "APE6EVM board - Reference Device Tree Implementation"
+	depends on ARCH_R8A73A4
+	select USE_OF
+	---help---
+	   Use reference implementation of APE6EVM board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
@@ -91,12 +139,6 @@ config MACH_MACKEREL
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_KOTA2
-	bool "KOTA2 board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
@@ -124,6 +166,28 @@ config MACH_BOCKW
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
 	select RENESAS_INTC_IRQPIN
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	select SND_SOC_AK4554 if SND_SIMPLE_CARD
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+
+config MACH_BOCKW_REFERENCE
+	bool "BOCK-W  - Reference Device Tree Implementation"
+	depends on ARCH_R8A7778
+	select ARCH_REQUIRE_GPIOLIB
+	select RENESAS_INTC_IRQPIN
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of BockW board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
+config MACH_GENMAI
+	bool "Genmai board"
+	depends on ARCH_R7S72100
 	select USE_OF
 
 config MACH_MARZEN
@@ -131,6 +195,7 @@ config MACH_MARZEN
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
 
 config MACH_MARZEN_REFERENCE
 	bool "MARZEN board - Reference Device Tree Implementation"
@@ -150,6 +215,22 @@ config MACH_LAGER
 	depends on ARCH_R8A7790
 	select USE_OF
 
+config MACH_LAGER_REFERENCE
+	bool "Lager board - Reference Device Tree Implementation"
+	depends on ARCH_R8A7790
+	select USE_OF
+	---help---
+	   Use reference implementation of Lager board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
+config MACH_KOELSCH
+	bool "Koelsch board"
+	depends on ARCH_R8A7791
+	select USE_OF
+
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
@@ -186,6 +267,15 @@ config CPU_HAS_INTEVT
         bool
 	default y
 
+config SH_CLK_CPG
+	bool
+
+source "drivers/sh/Kconfig"
+
+endif
+
+if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+
 menu "Timer and clock configuration"
 
 config SHMOBILE_TIMER_HZ
@@ -220,9 +310,4 @@ config EM_TIMER_STI
 
 endmenu
 
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6165a517f580..51db2bcafabf 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -2,52 +2,79 @@
 # Makefile for the linux kernel.
 #
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
+
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o clock-r8a7790.o
-obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
+
+# Clock objects
+ifndef CONFIG_COMMON_CLK
+obj-y				+= clock.o
+obj-$(CONFIG_ARCH_SH7372)	+= clock-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4)	+= clock-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
+obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
+endif
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
-smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
-smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
+smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791)	+= smp-r8a7791.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
-obj-$(CONFIG_ARCH_R8A7740)	+= entry-intc.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-obj-$(CONFIG_ARCH_SHMOBILE)	+= pm-rmobile.o
-obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o
-obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
+obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o pm-rmobile.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
+obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o pm-rmobile.o
+obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
+ifdef CONFIG_ARCH_SHMOBILE_MULTI
+obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
+else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
+obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
-obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
+obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
+obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
+obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
+obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
+endif
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 84c6868580f0..391d72a5536c 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,15 +1,18 @@
 # per-board load address for uImage
 loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
+loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
+loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
+loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
+loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
deleted file mode 100644
index c7540710906f..000000000000
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ /dev/null
@@ -1,672 +0,0 @@
-/*
- * arch/arm/mach-shmobile/board-ag5evm.c
- *
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_sci.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/videodev2.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/sh_clk.h>
-#include <linux/irqchip/arm-gic.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-#include <sound/sh_fsi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000,
-		.end		= 0x14000000 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
-		KEY_COFFEE,
-		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
-		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
-		KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* FSI A */
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(95),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name           = "sh_irda",
-	.id		= 0,
-	.resource       = irda_resources,
-	.num_resources  = ARRAY_SIZE(irda_resources),
-};
-
-/* MIPI-DSI */
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.name	= "DSI0",
-		.start  = 0xfeab0000,
-		.end    = 0xfeab3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "DSI0",
-		.start  = 0xfeab4000,
-		.end    = 0xfeab7fff,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck, *phy;
-	int ret;
-
-	pck = clk_get(&pdev->dev, "dsip_clk");
-	if (IS_ERR(pck)) {
-		ret = PTR_ERR(pck);
-		goto sh_mipi_set_dot_clock_pck_err;
-	}
-
-	phy = clk_get(&pdev->dev, "dsiphy_clk");
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto sh_mipi_set_dot_clock_phy_err;
-	}
-
-	if (enable) {
-		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		clk_set_rate(phy, clk_round_rate(pck, 510000000));
-		clk_enable(pck);
-		clk_enable(phy);
-	} else {
-		clk_disable(pck);
-		clk_disable(phy);
-	}
-
-	ret = 0;
-
-	clk_put(phy);
-sh_mipi_set_dot_clock_phy_err:
-	clk_put(pck);
-sh_mipi_set_dot_clock_pck_err:
-	return ret;
-}
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.channel	= LCDC_CHAN_MAINLCD,
-	.lane		= 2,
-	.vsynw_offset	= 20,
-	.clksrc		= 1,
-	.flags		= SH_MIPI_DSI_HSABM		|
-			  SH_MIPI_DSI_SYNC_PULSES_MODE	|
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-static unsigned char lcd_backlight_seq[3][2] = {
-	{ 0x04, 0x07 },
-	{ 0x23, 0x80 },
-	{ 0x03, 0x01 },
-};
-
-static int lcd_backlight_set_brightness(int brightness)
-{
-	struct i2c_adapter *adap;
-	struct i2c_msg msg;
-	unsigned int i;
-	int ret;
-
-	if (brightness == 0) {
-		/* Reset the chip */
-		gpio_set_value(235, 0);
-		mdelay(24);
-		gpio_set_value(235, 1);
-		return 0;
-	}
-
-	adap = i2c_get_adapter(1);
-	if (adap == NULL)
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) {
-		msg.addr = 0x6d;
-		msg.buf = &lcd_backlight_seq[i][0];
-		msg.len = 2;
-		msg.flags = 0;
-
-		ret = i2c_transfer(adap, &msg, 1);
-		if (ret < 0)
-			break;
-	}
-
-	i2c_put_adapter(adap);
-	return ret < 0 ? ret : 0;
-}
-
-/* LCDC0 */
-static const struct fb_videomode lcdc0_modes[] = {
-	{
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source = LCDC_CLK_PERIPHERAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = lcdc0_modes,
-		.num_modes = ARRAY_SIZE(lcdc0_modes),
-		.panel_cfg = {
-			.width = 44,
-			.height = 79,
-		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = lcd_backlight_set_brightness,
-		},
-		.tx_dev = &mipidsi0_device,
-	}
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Fixed 2.8V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply fixed2v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
-	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.cd_gpio	= 251,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply cn4_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn4_power_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(cn4_power_consumers),
-	.consumer_supplies      = cn4_power_consumers,
-};
-
-static struct fixed_voltage_config cn4_power_info = {
-	.supply_name = "CN4 SD/MMC Vdd",
-	.microvolts = 3300000,
-	.gpio = 114,
-	.enable_high = 1,
-	.init_data = &cn4_power_init_data,
-};
-
-static struct platform_device cn4_power = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &cn4_power_info,
-	},
-};
-
-static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
-{
-	static int power_gpio = -EINVAL;
-
-	if (power_gpio < 0) {
-		int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
-					   "sdhi1_power");
-		if (!ret)
-			power_gpio = 114;
-	}
-
-	/*
-	 * If requesting the GPIO above failed, it means, that the regulator got
-	 * probed and grabbed the GPIO, but we don't know, whether the sdhi
-	 * driver already uses the regulator. If it doesn't, we have to toggle
-	 * the GPIO ourselves, even though it is now owned by the fixed
-	 * regulator driver. We have to live with the race in case the driver
-	 * gets unloaded and the GPIO freed between these two steps.
-	 */
-	gpio_set_value(114, state);
-}
-
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.set_pwr	= ag5evm_sdhi1_set_pwr,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xee120000,
-		.end	= 0xee1200ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(87),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(88),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sh_sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static struct platform_device *ag5evm_devices[] __initdata = {
-	&cn4_power,
-	&eth_device,
-	&keysc_device,
-	&fsi_device,
-	&mmc_device,
-	&irda_device,
-	&mipidsi0_device,
-	&lcdc0_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map ag5evm_pinctrl_map[] = {
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C2 & I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
-				  "i2c2_0", "i2c2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_0", "i2c3"),
-	/* IrDA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
-				  "irda_0", "irda"),
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_in8", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out04", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out5", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out6_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out7_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out8_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out9_2", "keysc"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				      "keysc_in8", pin_pullup_conf),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_data_0", "scifa2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_ctrl_0", "scifa2"),
-	/* SDHI0 (CN15 [SD I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI1 (CN4 [WLAN I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				      "sdhi1_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				    "PORT263", pin_pullup_conf),
-};
-
-static void __init ag5evm_init(void)
-{
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
-				     ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(ag5evm_pinctrl_map,
-				  ARRAY_SIZE(ag5evm_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* enable MMCIF */
-	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
-	/* enable SMSC911X */
-	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
-	/* LCD panel */
-	gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	mdelay(1);
-	gpio_set_value(217, 1);
-	mdelay(100);
-
-	/* LCD backlight controller */
-	gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	lcd_backlight_set_brightness(0);
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
-}
-
-MACHINE_START(AG5EVM, "ag5evm")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= ag5evm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
new file mode 100644
index 000000000000..3276afcf3cc9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -0,0 +1,63 @@
+/*
+ * APE6EVM board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_device.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init ape6evm_add_standard_devices(void)
+{
+
+	struct clk *parent;
+	struct clk *mp;
+
+	r8a73a4_clock_init();
+
+	/* MP clock parent = extal2 */
+	parent      = clk_get(NULL, "extal2");
+	mp          = clk_get(NULL, "mp");
+	BUG_ON(IS_ERR(parent) || IS_ERR(mp));
+
+	clk_set_parent(mp, parent);
+	clk_put(parent);
+	clk_put(mp);
+
+	r8a73a4_add_dt_devices();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
+}
+
+static const char *ape6evm_boards_compat_dt[] __initdata = {
+	"renesas,ape6evm-reference",
+	NULL,
+};
+
+DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.init_early	= r8a73a4_init_early,
+	.init_machine	= ape6evm_add_standard_devices,
+	.dt_compat	= ape6evm_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 5eb0caa6a7d0..0fa068e30a30 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -19,9 +19,14 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
@@ -34,6 +39,58 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* LEDS */
+static struct gpio_led ape6evm_leds[] = {
+	{
+		.name		= "gnss-en",
+		.gpio		= 28,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "nfc-nrst",
+		.gpio		= 126,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "gnss-nrst",
+		.gpio		= 132,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "bt-wakeup",
+		.gpio		= 232,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "strobe",
+		.gpio		= 250,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "bbresetout",
+		.gpio		= 288,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
+	.leds		= ape6evm_leds,
+	.num_leds	= ARRAY_SIZE(ape6evm_leds),
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_0,			324,	"S16"),
+	GPIO_KEY(KEY_MENU,		325,	"S17"),
+	GPIO_KEY(KEY_HOME,		326,	"S18"),
+	GPIO_KEY(KEY_BACK,		327,	"S19"),
+	GPIO_KEY(KEY_VOLUMEUP,		328,	"S20"),
+	GPIO_KEY(KEY_VOLUMEDOWN,	329,	"S21"),
+};
+
+static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
@@ -41,7 +98,7 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 };
 
 /* SMSC LAN9220 */
-static const struct resource lan9220_res[] = {
+static const struct resource lan9220_res[] __initconst = {
 	DEFINE_RES_MEM(0x08000000, 0x1000),
 	{
 		.start	= irq_pin(40), /* IRQ40 */
@@ -49,19 +106,119 @@ static const struct resource lan9220_res[] = {
 	},
 };
 
-static const struct smsc911x_platform_config lan9220_data = {
+static const struct smsc911x_platform_config lan9220_data __initconst = {
 	.flags		= SMSC911X_USE_32BIT,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 };
 
-static const struct pinctrl_map ape6evm_pinctrl_map[] = {
+/*
+ * MMC0 power supplies:
+ * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
+ * regulator. Until support for it is added to this file we simulate the
+ * Vcc supply by a fixed always-on regulator
+ */
+static struct regulator_consumer_supply vcc_mmc0_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+};
+
+/*
+ * SDHI0 power supplies:
+ * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
+ * provided by the same tps80032 regulator as both MMC0 voltages - see comment
+ * above
+ */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
+	.consumer_supplies      = vcc_sdhi0_consumers,
+};
+
+static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
+	.supply_name = "SDHI0 Vcc",
+	.microvolts = 3300000,
+	.gpio = 76,
+	.enable_high = 1,
+	.init_data = &vcc_sdhi0_init_data,
+};
+
+/*
+ * SDHI1 power supplies:
+ * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
+ */
+static struct regulator_consumer_supply vcc_sdhi1_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+};
+
+/* MMCIF */
+static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF0_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF0_RX,
+	.ccs_unsupported = true,
+};
+
+static const struct resource mmcif0_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"),
+	DEFINE_RES_IRQ(gic_spi(169)),
+};
+
+/* SDHI0 */
+static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+};
+
+static const struct resource sdhi0_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static const struct resource sdhi1_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"),
+	DEFINE_RES_IRQ(gic_spi(166)),
+};
+
+static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = {
 	/* SCIFA0 console */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
 				  "scifa0_data", "scifa0"),
 	/* SMSC */
 	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
 				  "irqc_irq40", "irqc"),
+	/* MMCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+				  "mmc0_data8", "mmc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+				  "mmc0_ctrl", "mmc0"),
+	/* SDHI0: uSD: no WP */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_cd", "sdhi0"),
+	/* SDHI1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+				  "sdhi1_ctrl", "sdhi1"),
 };
 
 static void __init ape6evm_add_standard_devices(void)
@@ -94,6 +251,28 @@ static void __init ape6evm_add_standard_devices(void)
 	platform_device_register_resndata(&platform_bus, "smsc911x", -1,
 					  lan9220_res, ARRAY_SIZE(lan9220_res),
 					  &lan9220_data, sizeof(lan9220_data));
+
+	regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
+				     ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
+	platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
+					  mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
+					  &mmcif0_pdata, sizeof(mmcif0_pdata));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_pdata, sizeof(sdhi0_pdata));
+	regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
+				     ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+					  &sdhi1_pdata, sizeof(sdhi1_pdata));
+	platform_device_register_data(&platform_bus, "gpio-keys", -1,
+				      &ape6evm_keys_pdata,
+				      sizeof(ape6evm_keys_pdata));
+	platform_device_register_data(&platform_bus, "leds-gpio", -1,
+				      &ape6evm_leds_pdata,
+				      sizeof(ape6evm_leds_pdata));
 }
 
 static const char *ape6evm_boards_compat_dt[] __initdata = {
@@ -102,8 +281,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_irq	= irqchip_init,
-	.init_time	= shmobile_timer_init,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 03b85fec2ddb..57d1a78367b6 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
-#include <linux/pinctrl/machine.h>
 #include <mach/common.h>
 #include <mach/r8a7740.h>
 #include <asm/mach/arch.h>
@@ -119,12 +118,6 @@
  *	usbhsf_power_ctrl()
  */
 
-static const struct pinctrl_map eva_pinctrl_map[] = {
-	/* SCIFA1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
-				  "scifa1_data", "scifa1"),
-};
-
 static void __init eva_clock_init(void)
 {
 	struct clk *system	= clk_get(NULL, "system_clk");
@@ -165,35 +158,26 @@ clock_error:
  */
 static void __init eva_init(void)
 {
-
 	r8a7740_clock_init(MD_CK0 | MD_CK2);
 	eva_clock_init();
 
-	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-	r8a7740_pinmux_init();
-
 	r8a7740_meram_workaround();
 
-	/*
-	 * Touchscreen
-	 * TODO: Move reset GPIO over to .dts when we can reference it
-	 */
-	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
 	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
 #endif
 
 	r8a7740_add_standard_devices_dt();
+
 	r8a7740_pm_init();
 }
 
 #define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(char mode, const char *cmd)
+static void eva_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
+	writel(1 << 31, RESCNT2);
 }
 
 static const char *eva_boards_compat_dt[] __initdata = {
@@ -206,7 +190,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
-	.init_time	= shmobile_timer_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= eva_boards_compat_dt,
 	.restart	= eva_restart,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 3a6ffa250fb1..8bc8e4c58847 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -31,6 +31,8 @@
 #include <linux/gpio_keys.h>
 #include <linux/regulator/driver.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pwm-renesas-tpu.h>
+#include <linux/pwm_backlight.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
@@ -386,7 +388,50 @@ static struct platform_device sh_eth_device = {
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 };
 
-/* LCDC */
+/* PWM */
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start = 0xe6600000,
+		.end = 0xe66000ff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct tpu_pwm_platform_data pwm_device_data = {
+	.channels[2] = {
+		.polarity = PWM_POLARITY_INVERSED,
+	}
+};
+
+static struct platform_device pwm_device = {
+	.name = "renesas-tpu-pwm",
+	.id = -1,
+	.dev = {
+		.platform_data = &pwm_device_data,
+	},
+	.num_resources = ARRAY_SIZE(pwm_resources),
+	.resource = pwm_resources,
+};
+
+static struct pwm_lookup pwm_lookup[] = {
+	PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL),
+};
+
+/* LCDC and backlight */
+static struct platform_pwm_backlight_data pwm_backlight_data = {
+	.lth_brightness = 50,
+	.max_brightness = 255,
+	.dft_brightness = 255,
+	.pwm_period_ns = 33333, /* 30kHz */
+};
+
+static struct platform_device pwm_backlight_device = {
+	.name = "pwm-backlight",
+	.dev = {
+		.platform_data = &pwm_backlight_data,
+	},
+};
+
 static struct fb_videomode lcdc0_mode = {
 	.name		= "AMPIER/AM-800480",
 	.xres		= 800,
@@ -678,15 +723,6 @@ static struct platform_device vcc_sdhi1 = {
 };
 
 /* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
@@ -787,6 +823,9 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.caps		= MMC_CAP_4_BIT_DATA |
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct resource sh_mmcif_resources[] = {
@@ -1029,6 +1068,8 @@ static struct i2c_board_info i2c2_devices[] = {
  */
 static struct platform_device *eva_devices[] __initdata = {
 	&lcdc0_device,
+	&pwm_device,
+	&pwm_backlight_device,
 	&gpio_keys_device,
 	&sh_eth_device,
 	&vcc_sdhi0,
@@ -1068,9 +1109,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
 				  "fsib_mclk_in", "fsib"),
 	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_int", "gether"),
 	/* HDMI */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
@@ -1100,6 +1141,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	/* ST1232 */
 	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
 				  "intc_irq10", "intc"),
+	/* TPU0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
+				  "tpu0_to2_1", "tpu0"),
 	/* USBHS */
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
 				  "intc_irq7_1", "intc"),
@@ -1153,13 +1197,13 @@ static void __init eva_init(void)
 				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
 
 	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
+	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
 
 	r8a7740_pinmux_init();
 	r8a7740_meram_workaround();
 
 	/* LCDC0 */
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
@@ -1270,7 +1314,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.map_io		= r8a7740_map_io,
 	.init_early	= eva_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
+	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
 	.init_time	= eva_earlytimer_init,
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
new file mode 100644
index 000000000000..ae88fdad4b3a
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -0,0 +1,81 @@
+/*
+ * Bock-W board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <mach/common.h>
+#include <mach/r8a7778.h>
+#include <asm/mach/arch.h>
+
+/*
+ *	see board-bock.c for checking detail of dip-switch
+ */
+
+static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* SCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_data_a", "scif0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_ctrl", "scif0"),
+};
+
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
+static void __init bockw_init(void)
+{
+	static void __iomem *fpga;
+
+	r8a7778_clock_init();
+	r8a7778_init_irq_extpin_dt(1);
+
+	pinctrl_register_mappings(bockw_pinctrl_map,
+				  ARRAY_SIZE(bockw_pinctrl_map));
+	r8a7778_pinmux_init();
+	r8a7778_add_dt_devices();
+
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
+		/*
+		 * CAUTION
+		 *
+		 * IRQ0/1 is cascaded interrupt from FPGA.
+		 * it should be cared in the future
+		 * Now, it is assuming IRQ0 was used only from SMSC.
+		 */
+		u16 val = ioread16(fpga + IRQ0MR);
+		val &= ~(1 << 4); /* enable SMSC911x */
+		iowrite16(val, fpga + IRQ0MR);
+	}
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *bockw_boards_compat_dt[] __initdata = {
+	"renesas,bockw-reference",
+	NULL,
+};
+
+DT_MACHINE_START(BOCKW_DT, "bockw")
+	.init_early	= r8a7778_init_delay,
+	.init_irq	= r8a7778_init_irq_dt,
+	.init_machine	= bockw_init,
+	.dt_compat	= bockw_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 35dd7f201a16..38611526fe9a 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -21,19 +21,30 @@
 
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
 #include <asm/mach/arch.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
+static void __iomem *fpga;
 
 /*
  *	CN9(Upper side) SCIF/RCAN selection
@@ -60,34 +71,149 @@
  * SW19	(MMC)	1 pin
  */
 
+/*
+ *	SSI settings
+ *
+ * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
+ * SW46: 1101		(SSI6 Recorde)
+ * SW47: 1110		(SSI5 Playback)
+ * SW48: 11		(Recorde power)
+ * SW49: 1		(SSI slave mode)
+ * SW50: 1111		(SSI7, SSI8)
+ * SW51: 1111		(SSI3, SSI4)
+ * SW54: 1pin		(ak4554 FPGA control)
+ * SW55: 1		(CLKB is 24.5760MHz)
+ * SW60: 1pin		(ak4554 FPGA control)
+ * SW61: 3pin		(use X11 clock)
+ * SW78: 3-6		(ak4642 connects I2C0)
+ *
+ * You can use sound as
+ *
+ * hw0: CN19: SSI56-AK4643
+ * hw1: CN21: SSI3-AK4554(playback)
+ * hw2: CN21: SSI4-AK4554(capture)
+ * hw3: CN20: SSI7-AK4554(playback)
+ * hw4: CN20: SSI8-AK4554(capture)
+ *
+ * this command is required when playback on hw0.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
+/*
+ * USB
+ *
+ * USB1 (CN29) can be Host/Function
+ *
+ *		Host	Func
+ * SW98		1	2
+ * SW99		1	3
+ */
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct smsc911x_platform_config smsc911x_data = {
+static struct smsc911x_platform_config smsc911x_data __initdata = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct resource smsc911x_resources[] = {
+static struct resource smsc911x_resources[] __initdata = {
 	DEFINE_RES_MEM(0x18300000, 0x1000),
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
+/*
+ * When USB1 is Func
+ */
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+#define SUSPMODE	0x102
+static int usbhsf_power_ctrl(struct platform_device *pdev,
+			     void __iomem *base, int enable)
+{
+	enable = !!enable;
+
+	r8a7778_usb_phy_power(enable);
+
+	iowrite16(enable << 14, base + SUSPMODE);
+
+	return 0;
+}
+
+static struct resource usbhsf_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe60000, 0x110),
+	DEFINE_RES_IRQ(gic_iid(0x4f)),
+};
+
+static struct renesas_usbhs_platform_info usbhs_info __initdata = {
+	.platform_callback = {
+		.get_id		= usbhsf_get_id,
+		.power_ctrl	= usbhsf_power_ctrl,
+	},
+	.driver_param = {
+		.buswait_bwait	= 4,
+	},
+};
+
+#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
+#define USB1_DEVICE	"renesas_usbhs"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
+	platform_device_register_resndata(			\
+		&platform_bus, "renesas_usbhs", -1,		\
+		usbhsf_resources,				\
+		ARRAY_SIZE(usbhsf_resources),			\
+		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
+
+#else
+/*
+ * When USB1 is Host
+ */
+#define USB_PHY_SETTING { }
+#define USB1_DEVICE	"ehci-platform"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
+
+#endif
+
 /* USB */
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+static struct resource usb_phy_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe70800, 0x100),
+	DEFINE_RES_MEM(0xffe76000, 0x100),
+};
+
+static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
+	USB_PHY_SETTING;
+
 
 /* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.dma_slave_tx	= HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xFFE4C000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x77)),
+};
+
+/* Ether */
+static struct resource ether_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfde00000, 0x400),
+	DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
 static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.phy		= 0x01,
 	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
@@ -105,7 +231,9 @@ static struct sh_eth_plat_data ether_platform_data __initdata = {
 static struct i2c_board_info i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("rx8581", 0x51),
-	},
+	}, {
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
 };
 
 /* HSPI*/
@@ -136,7 +264,12 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 /* MMC */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
+static struct resource mmc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe4e000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x5d)),
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.caps		= MMC_CAP_4_BIT_DATA |
@@ -144,10 +277,6 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_NEEDS_POLL,
 };
 
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
 /* In the default configuration both decoders reside on I2C bus 0 */
 #define BOCKW_CAMERA(idx)						\
 static struct i2c_board_info camera##idx##_info = {			\
@@ -163,7 +292,237 @@ static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
 BOCKW_CAMERA(0);
 BOCKW_CAMERA(1);
 
+/* VIN */
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+#define R8A7778_VIN(idx)						\
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7778-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+	.data		= &vin_platform_data,				\
+	.size_data	= sizeof(vin_platform_data),			\
+}
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
+	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
+	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI_UNUSED, /* SSI 0 */
+	RSND_SSI_UNUSED, /* SSI 1 */
+	RSND_SSI_UNUSED, /* SSI 2 */
+	RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
+	RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
+	RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+};
+
+static struct rsnd_scu_platform_info rsnd_scu[9] = {
+	/* no member at this point */
+};
+
+enum {
+	AK4554_34 = 0,
+	AK4643_56,
+	AK4554_78,
+	SOUND_MAX,
+};
+
+static int rsnd_codec_power(int id, int enable)
+{
+	static int sound_user[SOUND_MAX] = {0, 0, 0};
+	int *usr = NULL;
+	u32 bit;
+
+	switch (id) {
+	case 3:
+	case 4:
+		usr = sound_user + AK4554_34;
+		bit = (1 << 10);
+		break;
+	case 5:
+	case 6:
+		usr = sound_user + AK4643_56;
+		bit = (1 << 6);
+		break;
+	case 7:
+	case 8:
+		usr = sound_user + AK4554_78;
+		bit = (1 << 7);
+		break;
+	}
+
+	if (!usr)
+		return -EIO;
+
+	if (enable) {
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val &= ~bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+
+		(*usr)++;
+	} else {
+		if (*usr == 0)
+			return 0;
+
+		(*usr)--;
+
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val |= bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+	}
+
+	return 0;
+}
+
+static int rsnd_start(int id)
+{
+	return rsnd_codec_power(id, 1);
+}
+
+static int rsnd_stop(int id)
+{
+	return rsnd_codec_power(id, 0);
+}
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN1,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.scu_info	= rsnd_scu,
+	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+	.start		= rsnd_start,
+	.stop		= rsnd_stop,
+};
+
+static struct asoc_simple_card_info rsnd_card_info[] = {
+	/* SSI5, SSI6 */
+	{
+		.name		= "AK4643",
+		.card		= "SSI56-AK4643",
+		.codec		= "ak4642-codec.0-0012",
+		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+		.cpu_dai = {
+			.name	= "rsnd-dai.0",
+			.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+		},
+		.codec_dai = {
+			.name	= "ak4642-hifi",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+			.sysclk	= 11289600,
+		},
+	},
+	/* SSI3 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI3-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.1",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI4 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI4-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.2",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI7 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI7-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.3",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI8 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI8-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.4",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	}
+};
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* AUDIO */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_a", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_b", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi34_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi3_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi4_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi78_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi7_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi8_data", "ssi"),
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
 				  "ether_rmii", "ether"),
@@ -183,7 +542,7 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 	/* USB */
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
 				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
+	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
@@ -206,26 +565,28 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "vin1_data8", "vin1"),
 };
 
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
 #define PFC	0xfffc0000
 #define PUPR4	0x110
 static void __init bockw_init(void)
 {
 	void __iomem *base;
+	struct clk *clk;
+	int i;
 
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
-	r8a7778_add_usb_phy_device(&usb_phy_platform_data);
-	r8a7778_add_ether_device(&ether_platform_data);
-	r8a7778_add_i2c_device(0);
-	r8a7778_add_hspi_device(0);
-	r8a7778_add_mmc_device(&sh_mmcif_plat);
-	r8a7778_add_vin_device(0, &vin_platform_data);
+
+	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_platform_data,
+					  sizeof(ether_platform_data));
+
+	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */
 	if (!IS_ENABLED(CONFIG_SH_ETH))
-		r8a7778_add_vin_device(1, &vin_platform_data);
+		platform_device_register_full(&vin1_info);
 	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
 				      &iclink0_ml86v7667,
 				      sizeof(iclink0_ml86v7667));
@@ -241,9 +602,22 @@ static void __init bockw_init(void)
 				  ARRAY_SIZE(bockw_pinctrl_map));
 	r8a7778_pinmux_init();
 
+	platform_device_register_resndata(
+		&platform_bus, "sh_mmcif", -1,
+		mmc_resources, ARRAY_SIZE(mmc_resources),
+		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_usb_phy", -1,
+		usb_phy_resources,
+		ARRAY_SIZE(usb_phy_resources),
+		&usb_phy_platform_data,
+		sizeof(struct rcar_phy_platform_data));
+
+
 	/* for SMSC */
-	base = ioremap_nocache(FPGA, SZ_1M);
-	if (base) {
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
 		/*
 		 * CAUTION
 		 *
@@ -251,10 +625,9 @@ static void __init bockw_init(void)
 		 * it should be cared in the future
 		 * Now, it is assuming IRQ0 was used only from SMSC.
 		 */
-		u16 val = ioread16(base + IRQ0MR);
+		u16 val = ioread16(fpga + IRQ0MR);
 		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, base + IRQ0MR);
-		iounmap(base);
+		iowrite16(val, fpga + IRQ0MR);
 
 		regulator_register_fixed(0, dummy_supplies,
 					 ARRAY_SIZE(dummy_supplies));
@@ -276,8 +649,47 @@ static void __init bockw_init(void)
 		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
 		iounmap(base);
 
-		r8a7778_sdhi_init(0, &sdhi0_info);
+		platform_device_register_resndata(
+			&platform_bus, "sh_mobile_sdhi", 0,
+			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+			&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
 	}
+
+	/* for Audio */
+	clk = clk_get(NULL, "audio_clk_b");
+	clk_set_rate(clk, 24576000);
+	clk_put(clk);
+	rsnd_codec_power(5, 1); /* enable ak4642 */
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 0, NULL, 0);
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 1, NULL, 0);
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
+		struct platform_device_info cardinfo = {
+			.parent         = &platform_bus,
+			.name           = "asoc-simple-card",
+			.id             = i,
+			.data           = &rsnd_card_info[i],
+			.size_data      = sizeof(struct asoc_simple_card_info),
+			.dma_mask       = ~0,
+		};
+
+		platform_device_register_full(&cardinfo);
+	}
+}
+
+static void __init bockw_init_late(void)
+{
+	r8a7778_init_late();
+	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
 }
 
 static const char *bockw_boards_compat_dt[] __initdata = {
@@ -289,7 +701,6 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_machine	= bockw_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = r8a7778_init_late,
+	.init_late      = bockw_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
new file mode 100644
index 000000000000..3e92e3c62d4c
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -0,0 +1,43 @@
+/*
+ * Genmai board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init genmai_add_standard_devices(void)
+{
+	r7s72100_clock_init();
+	r7s72100_add_dt_devices();
+}
+
+static const char * const genmai_boards_compat_dt[] __initconst = {
+	"renesas,genmai",
+	NULL,
+};
+
+DT_MACHINE_START(GENMAI_DT, "genmai")
+	.init_early	= r7s72100_init_early,
+	.init_machine	= genmai_add_standard_devices,
+	.dt_compat	= genmai_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
new file mode 100644
index 000000000000..ace1711a6cd8
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -0,0 +1,47 @@
+/*
+ * Koelsch board support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init koelsch_add_standard_devices(void)
+{
+	r8a7791_clock_init();
+	r8a7791_add_standard_devices();
+}
+
+static const char * const koelsch_boards_compat_dt[] __initconst = {
+	"renesas,koelsch",
+	NULL,
+};
+
+DT_MACHINE_START(KOELSCH_DT, "koelsch")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_machine	= koelsch_add_standard_devices,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= koelsch_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
deleted file mode 100644
index ef5ca0ef0cb5..000000000000
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * kota2 board support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/leds-renesas-tpu.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* SMSC 9220 */
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000, /* CS5A */
-		.end		= 0x140000ff, /* A1->A7 */
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
-		0, 0, 0, 0, 0,
-		KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
-		0, KEY_DOWN, 0, 0, 0,
-		KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
-		KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
-		KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
-		0, KEY_UP, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
-	GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
-	GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
-	GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
-	GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
-	GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
-	GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
-	GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
-	/* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
-	GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
-	/* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons        = gpio_buttons,
-	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* GPIO LED */
-#define GPIO_LED(n, g) { .name = n, .gpio = g }
-
-static struct gpio_led gpio_leds[] = {
-	GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
-	GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
-	GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
-};
-
-static struct gpio_led_platform_data gpio_leds_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_leds_info,
-	},
-};
-
-/* TPU LED */
-static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
-	.name		= "V2513",
-	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
-	.pin_gpio	= 153,
-	.channel_offset = 0x90,
-	.timer_bit = 2,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu12_resources[] = {
-	[0] = {
-		.name	= "TPU12",
-		.start	= 0xe6610090,
-		.end	= 0xe66100b5,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu12_device = {
-	.name = "leds-renesas-tpu",
-	.id = 12,
-	.dev = {
-		.platform_data  = &led_renesas_tpu12_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu12_resources),
-	.resource	= tpu12_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
-	.name		= "V2514",
-	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
-	.pin_gpio	= 199,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu41_resources[] = {
-	[0] = {
-		.name	= "TPU41",
-		.start	= 0xe6640050,
-		.end	= 0xe6640075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu41_device = {
-	.name = "leds-renesas-tpu",
-	.id = 41,
-	.dev = {
-		.platform_data  = &led_renesas_tpu41_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu41_resources),
-	.resource	= tpu41_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
-	.name		= "V2515",
-	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
-	.pin_gpio	= 197,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu21_resources[] = {
-	[0] = {
-		.name	= "TPU21",
-		.start	= 0xe6620050,
-		.end	= 0xe6620075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu21_device = {
-	.name = "leds-renesas-tpu",
-	.id = 21,
-	.dev = {
-		.platform_data  = &led_renesas_tpu21_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu21_resources),
-	.resource	= tpu21_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
-	.name		= "KEYLED",
-	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
-	.pin_gpio	= 163,
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu30_resources[] = {
-	[0] = {
-		.name	= "TPU30",
-		.start	= 0xe6630010,
-		.end	= 0xe6630035,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu30_device = {
-	.name = "leds-renesas-tpu",
-	.id = 30,
-	.dev = {
-		.platform_data  = &led_renesas_tpu30_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu30_resources),
-	.resource	= tpu30_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource mmcif_resources[] = {
-	[0] = {
-		.name   = "MMCIF",
-		.start  = 0xe6bd0000,
-		.end    = 0xe6bd00ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(140),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(141),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data mmcif_info = {
-	.ocr            = MMC_VDD_165_195,
-	.caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-};
-
-static struct platform_device mmcif_device = {
-	.name           = "sh_mmcif",
-	.id             = 0,
-	.dev            = {
-		.platform_data          = &mmcif_info,
-	},
-	.num_resources  = ARRAY_SIZE(mmcif_resources),
-	.resource       = mmcif_resources,
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name   = "SDHI0",
-		.start  = 0xee100000,
-		.end    = 0xee1000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(84),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.dev    = {
-		.platform_data  = &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name   = "SDHI1",
-		.start  = 0xee120000,
-		.end    = 0xee1200ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(87),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(88),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 1,
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.dev    = {
-		.platform_data  = &sdhi1_info,
-	},
-};
-
-static struct platform_device *kota2_devices[] __initdata = {
-	&eth_device,
-	&keysc_device,
-	&gpio_keys_device,
-	&gpio_leds_device,
-	&leds_tpu12_device,
-	&leds_tpu41_device,
-	&leds_tpu21_device,
-	&leds_tpu30_device,
-	&mmcif_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kota2_pinctrl_map[] = {
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_in8", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out04", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out5", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out6_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out7_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out8_0", "keysc"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				      "keysc_in8", pin_pullup_conf),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA2 (UART2) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_data_0", "scifa2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_ctrl_0", "scifa2"),
-	/* SCIFA4 (UART1) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SCIFB (BT) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_data_0", "scifb"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_clk_0", "scifb"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_ctrl_0", "scifb"),
-	/* SDHI0 (microSD) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				      "sdhi0_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				    "PORT256", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				    "PORT251", pin_pullup_conf),
-	/* SDHI1 (BCM4330) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				      "sdhi1_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				    "PORT263", pin_pullup_conf),
-	/* SMSC911X */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_data_0_7", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_data_8_15", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs5_a", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_we0", "bsc"),
-};
-
-static void __init kota2_init(void)
-{
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kota2_pinctrl_map,
-				  ARRAY_SIZE(kota2_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* SMSC911X */
-	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
-	/* MMCIF */
-	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
-}
-
-MACHINE_START(KOTA2, "kota2")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kota2_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
new file mode 100644
index 000000000000..054d8d5c8fc1
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -0,0 +1,48 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		emev2_clock_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d",
+	"renesas,kzm9d-reference",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_init_delay,
+	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 4368000e1127..30c2cc695b12 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq,
+	.init_early	= emev2_init_delay,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= kzm9d_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe8a45c..598e32488410 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -21,67 +21,19 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-};
-
 static void __init kzm_init(void)
 {
 	sh73a0_add_standard_devices_dt();
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* enable SD */
-	gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
-	gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
@@ -99,8 +51,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= kzm_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1068120d339f..fe689b7fdc9e 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -54,14 +54,14 @@
 /*
  * external GPIO
  */
-#define GPIO_PCF8575_BASE	(GPIO_NR)
-#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+#define GPIO_PCF8575_BASE	(310)
+#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
 
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
@@ -366,6 +366,7 @@ static struct resource sh_mmcif_resources[] = {
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
 	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
 	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
new file mode 100644
index 000000000000..1a1a4a888632
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -0,0 +1,46 @@
+/*
+ * Lager board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Simon Horman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/r8a7790.h>
+#include <asm/mach/arch.h>
+
+static void __init lager_add_standard_devices(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	r8a7790_clock_init();
+
+	r8a7790_add_dt_devices();
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *lager_boards_compat_dt[] __initdata = {
+	"renesas,lager-reference",
+	NULL,
+};
+
+DT_MACHINE_START(LAGER_DT, "lager")
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.init_machine	= lager_add_standard_devices,
+	.dt_compat	= lager_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 8d6bd5c5efb9..a8d3ce646fb9 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,17 +22,80 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/sh_eth.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data lager_du_pdata __initconst = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led lager_leds[] = {
 	{
@@ -50,7 +113,7 @@ static struct gpio_led lager_leds[] = {
 	},
 };
 
-static __initdata struct gpio_led_platform_data lager_leds_pdata = {
+static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
 	.leds		= lager_leds,
 	.num_leds	= ARRAY_SIZE(lager_leds),
 };
@@ -66,18 +129,70 @@ static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_1,		RCAR_GP_PIN(1, 14),	"SW2-pin1"),
 };
 
-static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
+static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
 	.buttons	= gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
 
+/* Fixed 3.3V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
+};
+
+/* MMCIF */
+static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.clk_ctrl2_present = true,
+	.ccs_unsupported = true,
+};
+
+static const struct resource mmcif1_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
+	DEFINE_RES_IRQ(gic_spi(170)),
+};
+
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x1,
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
+	.ether_link_active_low	= 1,
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee700000, 0x400),
+	DEFINE_RES_IRQ(gic_spi(162)),
+};
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_rgb666", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_sync_1", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_clk_out_0", "du"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* MMCIF1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+				  "mmc1_data8", "mmc1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+				  "mmc1_ctrl", "mmc1"),
+	/* Ether */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_link", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_mdio", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_rmii", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "intc_irq0", "intc"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -95,16 +210,53 @@ static void __init lager_add_standard_devices(void)
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &lager_keys_pdata,
 				      sizeof(lager_keys_pdata));
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
+					  mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
+					  &mmcif1_pdata, sizeof(mmcif1_pdata));
+
+	platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_pdata, sizeof(ether_pdata));
+
+	lager_add_du_device();
+}
+
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+	lager_add_standard_devices();
+
+	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
 }
 
-static const char *lager_boards_compat_dt[] __initdata = {
+static const char * const lager_boards_compat_dt[] __initconst = {
 	"renesas,lager",
 	NULL,
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_irq	= irqchip_init,
-	.init_time	= r8a7790_timer_init,
-	.init_machine	= lager_add_standard_devices,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 85f51a849a50..af06753eb809 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/pm_clock.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -49,7 +50,6 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
-
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -346,7 +346,7 @@ static struct platform_device meram_device = {
 	},
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static struct fb_videomode mackerel_lcdc_modes[] = {
 	{
 		.name		= "WVGA Panel",
@@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
 	},
 };
 
-static int mackerel_set_brightness(int brightness)
-{
-	gpio_set_value(31, brightness);
-
-	return 0;
-}
-
 static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.meram_size     = 0x40,
@@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width		= 152,
 			.height		= 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = mackerel_set_brightness,
-		},
 		.meram_cfg = &lcd_meram_cfg,
 	}
 };
@@ -425,6 +413,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = 31,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* HDMI */
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.flags		= HDMI_SND_SRC_SPDIF,
@@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&usbhs0_device,
 	&usbhs1_device,
 	&leds_device,
@@ -1441,9 +1444,6 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* backlight, off by default */
-	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
-
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 480d882e42c7..2773936bf7dc 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,43 +19,16 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/pinctrl/machine.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 
-static const struct pinctrl_map marzen_pinctrl_map[] = {
-	/* SCIF2 (CN18: DEBUG0) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
-				  "scif2_data_c", "scif2"),
-	/* SCIF4 (CN19: DEBUG1) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
-				  "scif4_data", "scif4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_wp", "sdhi0"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "intc_irq1_b", "intc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "lbsc_ex_cs0", "lbsc"),
-};
-
 static void __init marzen_init(void)
 {
-	pinctrl_register_mappings(marzen_pinctrl_map,
-				  ARRAY_SIZE(marzen_pinctrl_map));
-	r8a7779_pinmux_init();
-
 	r8a7779_add_standard_devices_dt();
+	r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
 }
 
 static const char *marzen_boards_compat_dt[] __initdata = {
@@ -70,6 +43,5 @@ DT_MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= marzen_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ca7fb2e63c60..da1352f5f71b 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
@@ -39,7 +41,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <media/soc_camera.h>
-#include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -59,7 +60,26 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70800,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct rcar_phy_platform_data usb_phy_platform_data;
+
+static struct platform_device usb_phy = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.dev  = {
+		.platform_data = &usb_phy_platform_data,
+	},
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
 
 /* SMSC LAN89218 */
 static struct resource smsc911x_resources[] = {
@@ -105,6 +125,8 @@ static struct resource sdhi0_resources[] = {
 };
 
 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
 };
@@ -150,6 +172,63 @@ static struct platform_device hspi_device = {
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
+/*
+ * DU
+ *
+ * The panel only specifies the [hv]display and [hv]total values. The position
+ * and width of the sync pulses don't matter, they're copied from VESA timings.
+ */
+static struct rcar_du_encoder_data du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_LVDS,
+		.output = RCAR_DU_OUTPUT_DPAD1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data du_pdata __initconst = {
+	.encoders = du_encoders,
+	.num_encoders = ARRAY_SIZE(du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfff80000, 0x40000),
+	DEFINE_RES_IRQ(gic_iid(0x3f)),
+};
+
+static void __init marzen_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7779",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &du_pdata,
+		.size_data = sizeof(du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -212,11 +291,25 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&thermal_device,
 	&hspi_device,
 	&leds_device,
+	&usb_phy,
 	&camera0_device,
 	&camera1_device,
 };
 
 static const struct pinctrl_map marzen_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_rgb888", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_sync_1", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_clk_out_0", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_rgb666", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_sync_1", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_clk_out", "du1"),
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
 				  "hspi0", "hspi0"),
@@ -274,19 +367,24 @@ static void __init marzen_init(void)
 	r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
 
 	r8a7779_add_standard_devices();
-	r8a7779_add_usb_phy_device(&usb_phy_platform_data);
 	r8a7779_add_vin_device(1, &vin_platform_data);
 	r8a7779_add_vin_device(3, &vin_platform_data);
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
+	marzen_add_du_device();
 }
 
-MACHINE_START(MARZEN, "marzen")
+static const char *marzen_boards_compat_dt[] __initdata = {
+        "renesas,marzen",
+        NULL,
+};
+
+DT_MACHINE_START(MARZEN, "marzen")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
 	.init_early	= r8a7779_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= r8a7779_init_irq,
+	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
 	.init_late	= r8a7779_init_late,
+	.dt_compat	= marzen_boards_compat_dt,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 4710f1847bb7..5ac13ba71d54 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -40,7 +40,6 @@
 #define USIB2SCLKDIV 0x65c
 #define USIB3SCLKDIV 0x660
 #define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
 
 /* not pretty, but hey */
 static void __iomem *smu_base;
@@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs)
 	iowrite32(value, smu_base + offs);
 }
 
-void emev2_set_boot_vector(unsigned long value)
-{
-	emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
 static struct clk_mapping smu_mapping = {
 	.phys	= EMEV2_SMU_BASE,
 	.len	= PAGE_SIZE,
@@ -205,23 +199,11 @@ static struct clk_lookup lookups[] = {
 void __init emev2_clock_init(void)
 {
 	int k, ret = 0;
-	static int is_setup;
-
-	/* yuck, this is ugly as hell, but the non-smp case of clocks
-	 * code is now designed to rely on ioremap() instead of static
-	 * entity maps. in the case of smp we need access to the SMU
-	 * register earlier than ioremap() is actually working without
-	 * any static maps. to enable SMP in ugly but with dynamic
-	 * mappings we have to call emev2_clock_init() from different
-	 * places depending on UP and SMP...
-	 */
-	if (is_setup++)
-		return;
 
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
 
-	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	/* setup STI timer to run on 32.768 kHz and deassert reset */
 	emev2_smu_write(0, STI_CLKSEL);
 	emev2_smu_write(1, STI_RSTCTRL);
 
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 000000000000..4aba20ca127e
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,202 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2012  Phil Edworthy
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR		0xfcfe0010
+#define FRQCR2		0xfcfe0014
+#define STBCR3		0xfcfe0420
+#define STBCR4		0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xfcfe0000,
+	.len	= 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13330000,
+	.mapping	= &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+	.recalc		= bus_recalc,
+};
+
+static struct clk bus_clk = {
+	.ops		= &bus_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&bus_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+	DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP33,	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+};
+
+void __init r7s72100_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5f7fe628b8a1..571409b611d3 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -30,10 +30,12 @@
 
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
 #define SMSTPCR5 0xe6150144
 
 #define FRQCRA		0xE6150000
 #define FRQCRB		0xE6150004
+#define FRQCRC		0xE61500E0
 #define VCLKCR1		0xE6150008
 #define VCLKCR2		0xE615000C
 #define VCLKCR3		0xE615001C
@@ -52,6 +54,7 @@
 #define HSICKCR		0xE615026C
 #define M4CKCR		0xE6150098
 #define PLLECR		0xE61500D0
+#define PLL0CR		0xE61500D8
 #define PLL1CR		0xE6150028
 #define PLL2CR		0xE615002C
 #define PLL2SCR		0xE61501F4
@@ -177,6 +180,7 @@ static struct sh_clk_ops pll_clk_ops = {
 		.mapping	= &cpg_mapping,		\
 	}
 
+PLL_CLOCK(pll0_clk,  &main_clk,      pll_parent_main,      1, 20, PLL0CR,  0);
 PLL_CLOCK(pll1_clk,  &main_clk,      pll_parent_main,       1, 7, PLL1CR,  1);
 PLL_CLOCK(pll2_clk,  &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR,  2);
 PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +188,157 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
 
 SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,	div2);
 
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+	return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
+static int frqcr_kick_do(struct clk *clk)
+{
+	int i;
+
+	/* set KICK bit in FRQCRB to update hardware setting, check success */
+	iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+	for (i = 1000; i; i--)
+		if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+			cpu_relax();
+		else
+			return 0;
+
+	return -ETIMEDOUT;
+}
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *frqcrc;
+	int ret;
+	unsigned long step, p_rate;
+	u32 val;
+
+	if (!clk->parent || !__clk_get(clk->parent))
+		return -ENODEV;
+
+	if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	/*
+	 * Users are supposed to first call clk_set_rate() only with
+	 * clk_round_rate() results. So, we don't fix wrong rates here, but
+	 * guard against them anyway
+	 */
+
+	p_rate = clk_get_rate(clk->parent);
+	if (rate == p_rate) {
+		val = 0;
+	} else {
+		step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+		if (rate > p_rate || rate < step) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		val = 32 - rate / step;
+	}
+
+	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+	iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+		  (val << clk->enable_bit), frqcrc);
+
+	ret = frqcr_kick_do(clk);
+
+done:
+	atomic_dec(&frqcr_lock);
+	__clk_put(clk->parent);
+	return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * theoretical rate = parent rate * multiplier / 32,
+	 * where 1 <= multiplier <= 32. Therefore we should do
+	 * multiplier = rate * 32 / parent rate
+	 * rounded rate = parent rate * multiplier / 32.
+	 * However, multiplication before division won't fit in 32 bits, so
+	 * we sacrifice some precision by first dividing and then multiplying.
+	 * To find the nearest divisor we calculate both and pick up the best
+	 * one. This avoids 64-bit arithmetics.
+	 */
+	unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+	rate_max = clk_get_rate(clk->parent);
+
+	/* output freq <= parent */
+	if (rate >= rate_max)
+		return rate_max;
+
+	step = DIV_ROUND_CLOSEST(rate_max, 32);
+	/* output freq >= parent / 32 */
+	if (step >= rate)
+		return step;
+
+	mul_min = rate / step;
+	mul_max = DIV_ROUND_UP(rate, step);
+	rate_min = step * mul_min;
+	if (mul_max == mul_min)
+		return rate_min;
+
+	rate_max = step * mul_max;
+
+	if (rate_max - rate <  rate - rate_min)
+		return rate_max;
+
+	return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+	void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+	unsigned int max = clk->div_mask + 1;
+	unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+			     clk->div_mask);
+
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+		(max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+	.recalc = zclk_recalc,
+	.set_rate = zclk_set_rate,
+	.round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+	.parent = &pll0_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 8,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk,	pll0_clk,		div2);
+
+static struct clk z2_clk = {
+	.parent = &pll0_div2_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 0,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -195,22 +350,23 @@ static struct clk *main_clks[] = {
 	&main_div2_clk,
 	&fsiack_clk,
 	&fsibck_clk,
+	&pll0_clk,
 	&pll1_clk,
 	&pll1_div2_clk,
 	&pll2_clk,
 	&pll2s_clk,
 	&pll2h_clk,
+	&z_clk,
+	&pll0_div2_clk,
+	&z2_clk,
 };
 
 /* DIV4 */
 static void div4_kick(struct clk *clk)
 {
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = ioread32(CPG_MAP(FRQCRB));
-	value |= (1 << 31);
-	iowrite32(value, CPG_MAP(FRQCRB));
+	if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+		frqcr_kick_do(clk);
+	atomic_dec(&frqcr_lock);
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -348,9 +504,11 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
-	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
-	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
-	MSTP522,
+	MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+	MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
+	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+	MSTP411, MSTP410, MSTP409,
+	MSTP522, MSTP515,
 	MSTP_NR
 };
 
@@ -361,12 +519,23 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 18, 0), /* DMAC */
+	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 0, 0), /* IIC2 */
 	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
 	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
 	[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+	[MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 16, 0), /* IIC6 */
+	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 17, 0), /* IIC7 */
+	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 18, 0), /* IIC0 */
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP409] = SH_CLK_MSTP32(&main_div2_clk,	SMSTPCR4, 9, 0), /* IIC5 */
+	[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+	[MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR5, 15, 0), /* IIC8 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -386,6 +555,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll2s",			&pll2s_clk),
 	CLKDEV_CON_ID("pll2h",			&pll2h_clk),
 
+	/* CPU clock */
+	CLKDEV_DEV_ID("cpu0",			&z_clk),
+
 	/* DIV6 */
 	CLKDEV_CON_ID("zb",			&div6_clks[DIV6_ZB]),
 	CLKDEV_CON_ID("vck1",			&div6_clks[DIV6_VCK1]),
@@ -407,7 +579,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
+	CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -418,6 +593,15 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+	CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+	CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
 
 	/* for DT */
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -429,6 +613,8 @@ void __init r8a73a4_clock_init(void)
 	int k, ret = 0;
 	u32 ckscr;
 
+	atomic_set(&frqcr_lock, -1);
+
 	reg = ioremap_nocache(CKSCR, PAGE_SIZE);
 	BUG_ON(!reg);
 	ckscr = ioread32(reg);
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index de10fd78bf2b..c826bca4024e 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -596,7 +596,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6bd0000.mmcif",         &mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
 	CLKDEV_DEV_ID("e9a00000.sh-eth",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas_tpu_pwm",	&mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 	CLKDEV_DEV_ID("e6870000.sdhi",          &mstp_clks[MSTP415]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index c4bf2d8fb111..fb6af83858e3 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -69,6 +69,15 @@ static struct clk extal_clk = {
 	.mapping = &cpg_mapping,
 };
 
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
 /*
  * clock ratio of these clock will be updated
  * on r8a7778_clock_init()
@@ -100,18 +109,23 @@ static struct clk *main_clks[] = {
 	&p_clk,
 	&g_clk,
 	&z_clk,
+	&audio_clk_a,
+	&audio_clk_b,
+	&audio_clk_c,
 };
 
 enum {
 	MSTP331,
 	MSTP323, MSTP322, MSTP321,
+	MSTP311, MSTP310,
+	MSTP309, MSTP308, MSTP307,
 	MSTP114,
 	MSTP110, MSTP109,
 	MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015,
-	MSTP007,
+	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
+	MSTP009, MSTP008, MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -119,6 +133,11 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
 	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
+	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
+	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
+	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
+	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
 	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
 	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
 	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
@@ -135,11 +154,20 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
+	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
+	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
+	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
+	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
 	[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
 	/* main */
+	CLKDEV_CON_ID("audio_clk_a",	&audio_clk_a),
+	CLKDEV_CON_ID("audio_clk_b",	&audio_clk_b),
+	CLKDEV_CON_ID("audio_clk_c",	&audio_clk_c),
+	CLKDEV_CON_ID("audio_clk_internal",	&s1_clk),
 	CLKDEV_CON_ID("shyway_clk",	&s_clk),
 	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
 
@@ -153,6 +181,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
 	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
+	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
@@ -168,6 +197,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+
+	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
+	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
+	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
+	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
+	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
+	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
+	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
+	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
+	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
 };
 
 void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index bd6ad922eb7e..1f7080fab0a5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -200,7 +200,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
+	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
 };
 
 void __init r8a7779_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5d71313df52d..a64f965c7da1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -24,6 +24,7 @@
 #include <linux/clkdev.h>
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/r8a7790.h>
 
 /*
  *   MD		EXTAL		PLL0	PLL1	PLL3
@@ -42,16 +43,17 @@
  *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
  */
 
-#define MD(nr)	(1 << nr)
-
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR1 0xe6150134
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
 
-#define MODEMR		0xE6160060
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
 #define SD3CKCR		0xE615007C
@@ -180,16 +182,33 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
-	MSTP721, MSTP720,
+	MSTP931, MSTP930, MSTP929, MSTP928,
+	MSTP813,
+	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
+	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+	MSTP124,
 	MSTP_NR
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
+	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
+	[MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -203,8 +222,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
-	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -244,6 +262,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -254,6 +277,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
@@ -266,6 +295,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
@@ -280,14 +310,9 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7790_clock_init(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
+	u32 mode = rcar_gen2_read_mode_pins();
 	int k, ret = 0;
 
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
new file mode 100644
index 000000000000..c9a26f16ce5b
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -0,0 +1,237 @@
+/*
+ * r8a7791 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ *	see "p1 / 2" on R8A7791_CLOCK_ROOT() below
+ */
+
+#define MD(nr)	(1 << nr)
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR0	0xE6150130
+#define SMSTPCR1	0xE6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xE615013C
+#define SMSTPCR5	0xE6150144
+#define SMSTPCR7	0xe615014c
+#define SMSTPCR8	0xE6150990
+#define SMSTPCR9	0xE6150994
+#define SMSTPCR10	0xE6150998
+#define SMSTPCR11	0xE615099C
+
+#define MODEMR		0xE6160060
+#define SDCKCR		0xE6150074
+#define SD2CKCR		0xE6150078
+#define SD3CKCR		0xE615007C
+#define MMC0CKCR	0xE6150240
+#define MMC1CKCR	0xE6150244
+#define SSPCKCR		0xE6150248
+#define SSPRSCKCR	0xE615024C
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7791_clock_init() */
+	.mapping	= &cpg_mapping,
+};
+
+static struct sh_clk_ops followparent_clk_ops = {
+	.recalc	= followparent_recalc,
+};
+
+static struct clk main_clk = {
+	/* .parent will be set r8a73a4_clock_init */
+	.ops	= &followparent_clk_ops,
+};
+
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7791_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
+SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
+SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+
+static struct clk *main_clks[] = {
+	&extal_clk,
+	&extal_div2_clk,
+	&main_clk,
+	&pll1_clk,
+	&pll1_div2_clk,
+	&pll3_clk,
+	&hp_clk,
+	&p_clk,
+	&rclk_clk,
+	&mp_clk,
+	&cp_clk,
+};
+
+/* MSTP */
+enum {
+	MSTP721, MSTP720,
+	MSTP719, MSTP718, MSTP715, MSTP714,
+	MSTP216, MSTP207, MSTP206,
+	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+	MSTP124,
+	MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
+	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
+	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
+	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
+	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
+	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+};
+
+static struct clk_lookup lookups[] = {
+
+	/* main clocks */
+	CLKDEV_CON_ID("extal",		&extal_clk),
+	CLKDEV_CON_ID("extal_div2",	&extal_div2_clk),
+	CLKDEV_CON_ID("main",		&main_clk),
+	CLKDEV_CON_ID("pll1",		&pll1_clk),
+	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
+	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("hp",		&hp_clk),
+	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("rclk",		&rclk_clk),
+	CLKDEV_CON_ID("mp",		&mp_clk),
+	CLKDEV_CON_ID("cp",		&cp_clk),
+	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+
+	/* MSTP */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+};
+
+#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
+	extal_clk.rate	= e * 1000 * 1000;			\
+	main_clk.parent	= m;					\
+	SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1);		\
+	if (mode & MD(19))					\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1);	\
+	else							\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
+void __init r8a7791_clock_init(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
+	int k, ret = 0;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+		break;
+	case MD(13):
+		R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+		break;
+	case MD(14):
+		R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		break;
+	case MD(13) | MD(14):
+		R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		break;
+	}
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		goto epanic;
+
+	return;
+
+epanic:
+	panic("failed to setup r8a7791 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index d9fd0336b910..c92c023f0d27 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -555,7 +555,7 @@ enum { MSTP001,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
 	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP303, MSTP302, MSTP301, MSTP300,
+	MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -593,6 +593,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+	[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
 	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
 	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
 	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
@@ -615,7 +616,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
 
 	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]),
+	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
@@ -669,10 +670,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
 	CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index bfd920083a3b..f45dde701d7b 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu)
 	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
 	ldr	r2, [r0, #8]		@ SCU Power Status Register
 	mov	r3, #3
-	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	lsl	r3, r3, r1
+	bic	r2, r2, r3		@ Clear bits of our CPU (Run Mode)
 	str	r2, [r0, #8]		@ write back
 
 	b	shmobile_invalidate_start
 ENDPROC(shmobile_boot_scu)
 
 	.text
+	.align	2
 	.globl	shmobile_scu_base
 shmobile_scu_base:
 	.space	4
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index a9d212498987..e5be5c88644b 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -24,15 +24,71 @@ ENDPROC(shmobile_invalidate_start)
  * This will be mapped at address 0 by SBAR register.
  * We need _long_ jump to the physical address.
  */
+	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
 	ldr     r0, 2f
-	ldr     pc, 1f
+	ldr     r1, 1f
+	bx	r1
+
 ENDPROC(shmobile_boot_vector)
 
+	.align	2
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
 	.globl	shmobile_boot_arg
 shmobile_boot_arg:
 2:	.space	4
+	.globl	shmobile_boot_size
+shmobile_boot_size:
+	.long	. - shmobile_boot_vector
+
+/*
+ * Per-CPU SMP boot function/argument selection code based on MPIDR
+ */
+
+ENTRY(shmobile_smp_boot)
+						@ r0 = MPIDR_HWID_BITMASK
+	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
+	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	mov	r1, #0				@ r1 = CPU index
+	adr	r5, 1f				@ array of per-cpu mpidr values
+	adr	r6, 2f				@ array of per-cpu functions
+	adr	r7, 3f				@ array of per-cpu arguments
+
+shmobile_smp_boot_find_mpidr:
+	ldr	r8, [r5, r1, lsl #2]
+	cmp	r8, r0
+	bne	shmobile_smp_boot_next
+
+	ldr	r9, [r6, r1, lsl #2]
+	cmp	r9, #0
+	bne	shmobile_smp_boot_found
+
+shmobile_smp_boot_next:
+	add	r1, r1, #1
+	cmp	r1, #CONFIG_NR_CPUS
+	blo	shmobile_smp_boot_find_mpidr
+
+	b	shmobile_smp_sleep
+
+shmobile_smp_boot_found:
+	ldr	r0, [r7, r1, lsl #2]
+	mov	pc, r9
+ENDPROC(shmobile_smp_boot)
+
+ENTRY(shmobile_smp_sleep)
+	wfi
+	b	shmobile_smp_boot
+ENDPROC(shmobile_smp_sleep)
+
+	.globl	shmobile_smp_mpidr
+shmobile_smp_mpidr:
+1:	.space	CONFIG_NR_CPUS * 4
+	.globl	shmobile_smp_fn
+shmobile_smp_fn:
+2:	.space	CONFIG_NR_CPUS * 4
+	.globl	shmobile_smp_arg
+shmobile_smp_arg:
+3:	.space	CONFIG_NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e818f029d8e3..e31980590eb4 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,7 +2,6 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_earlytimer_init(void);
-extern void shmobile_timer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
@@ -10,7 +9,23 @@ extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
+extern unsigned long shmobile_boot_size;
+extern void shmobile_smp_boot(void);
+extern void shmobile_smp_sleep(void);
+extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
+			      unsigned long arg);
+extern int shmobile_smp_cpu_disable(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 extern void shmobile_boot_scu(void);
+extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
+extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+					    struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -31,7 +46,6 @@ static inline int shmobile_cpuidle_init(void) { return 0; }
 #endif
 
 extern void __iomem *shmobile_scu_base;
-extern void shmobile_smp_init_cpus(unsigned int ncores);
 
 static inline void __init shmobile_init_late(void)
 {
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index ac3751705cab..c2eb7568d9be 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -2,11 +2,9 @@
 #define __ASM_EMEV2_H__
 
 extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
 
 #define EMEV2_GPIO_BASE 200
 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
deleted file mode 100644
index 99264a5ce5e4..000000000000
--- a/arch/arm/mach-shmobile/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 000000000000..5f34b20ecd4a
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_add_dt_devices(void);
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f043103e32c9..ce8bdd1d8a8a 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -1,8 +1,19 @@
 #ifndef __ASM_R8A73A4_H__
 #define __ASM_R8A73A4_H__
 
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_MMCIF0_TX,
+	SHDMA_SLAVE_MMCIF0_RX,
+	SHDMA_SLAVE_MMCIF1_TX,
+	SHDMA_SLAVE_MMCIF1_RX,
+};
+
 void r8a73a4_add_standard_devices(void);
+void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+void r8a73a4_init_early(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index b34d19b5ca5c..d07932f872b6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -42,11 +42,12 @@ enum {
 	SHDMA_SLAVE_FSIB_TX,
 	SHDMA_SLAVE_USBHS_TX,
 	SHDMA_SLAVE_USBHS_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
 };
 
 extern void r8a7740_meram_workaround(void);
 extern void r8a7740_init_delay(void);
-extern void r8a7740_init_irq(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index a7c6d151cdd5..441886c9714b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,29 +19,28 @@
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
 
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_data/camera-rcar.h>
 
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
+
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
-extern void r8a7778_add_i2c_device(int id);
-extern void r8a7778_add_hspi_device(int id);
-extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
-extern void r8a7778_add_vin_device(int id,
-				   struct rcar_vin_platform_data *pdata);
+extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_init_irq_extpin_dt(int irlm);
 extern void r8a7778_pinmux_init(void);
-extern void r8a7778_sdhi_init(int id, struct sh_mobile_sdhi_info *info);
+
+extern int r8a7778_usb_phy_power(bool enable);
 
 #endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 6d2b6417fe2a..17af34ed89c8 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -4,9 +4,15 @@
 #include <linux/sh_clk.h>
 #include <linux/pm_domain.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_data/camera-rcar.h>
 
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
+
 struct platform_device;
 
 struct r8a7779_pm_ch {
@@ -26,8 +32,8 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
 }
 
 extern void r8a7779_init_delay(void);
-extern void r8a7779_init_irq(void);
 extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_extpin_dt(int irlm);
 extern void r8a7779_init_irq_dt(void);
 extern void r8a7779_map_io(void);
 extern void r8a7779_earlytimer_init(void);
@@ -35,7 +41,6 @@ extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
 extern void r8a7779_add_vin_device(int idx,
 				   struct rcar_vin_platform_data *pdata);
 extern void r8a7779_init_late(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 2e919e61fa0d..5fbfa28b40b6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -1,9 +1,13 @@
 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
+#include <mach/rcar-gen2.h>
+
 void r8a7790_add_standard_devices(void);
+void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
-void r8a7790_timer_init(void);
+void r8a7790_init_early(void);
+extern struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
new file mode 100644
index 000000000000..051ead3c286e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+void r8a7791_add_standard_devices(void);
+void r8a7791_add_dt_devices(void);
+void r8a7791_clock_init(void);
+void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
new file mode 100644
index 000000000000..43f606eb2d82
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RCAR_GEN2_H__
+#define __ASM_RCAR_GEN2_H__
+
+void rcar_gen2_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 rcar_gen2_read_mode_pins(void);
+
+#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index eb7a4320d487..359b582dc270 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -1,379 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* Hardware manual Table 25-1 (GPIO) */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
-
-	GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-
-	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
-	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
-	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
-	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
-	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
-	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
-	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
-	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
-	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
-	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
-	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
-	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
-
-	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
-	GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
-
-	GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
-
-	GPIO_PORT288, GPIO_PORT289,
-
-	GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
-	GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
-
-	GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
-	GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
-
-	/* Table 25-1 (Function 0-7) */
-	GPIO_FN_GPI0 = 310,
-	GPIO_FN_GPI1,
-	GPIO_FN_GPI2,
-	GPIO_FN_GPI3,
-	GPIO_FN_GPI4,
-	GPIO_FN_GPI5,
-	GPIO_FN_GPI6,
-	GPIO_FN_GPI7,
-	GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
-	GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
-	GPIO_FN_GPO5,
-	GPIO_FN_PORT16_VIO_CKOR,
-	GPIO_FN_PORT19_VIO_CKO2,
-	GPIO_FN_GPO0,
-	GPIO_FN_GPO1,
-	GPIO_FN_GPO2, GPIO_FN_STATUS0,
-	GPIO_FN_GPO3, GPIO_FN_STATUS1,
-	GPIO_FN_GPO4, GPIO_FN_STATUS2,
-	GPIO_FN_VINT,
-	GPIO_FN_TCKON,
-	GPIO_FN_XDVFS1,
-	GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
-	GPIO_FN_XDVFS2,
-	GPIO_FN_PORT28_TPU1TO1,
-	GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
-	GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
-	GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
-	GPIO_FN_XWUP,
-	GPIO_FN_VACK,
-	GPIO_FN_XTAL1L,
-	GPIO_FN_PORT49_IROUT,
-	GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2,
-
-	GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3,
-	GPIO_FN_BBIF2_TXD2,
-	GPIO_FN_TPU3TO3,
-	GPIO_FN_TPU3TO2,
-	GPIO_FN_TPU0TO0,
-	GPIO_FN_A0, GPIO_FN_BS_,
-	GPIO_FN_A12, GPIO_FN_TPU4TO2,
-	GPIO_FN_A13, GPIO_FN_TPU0TO1,
-	GPIO_FN_A14,
-	GPIO_FN_A15,
-	GPIO_FN_A16, GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_A17, GPIO_FN_MSIOF0_TSYNC,
-	GPIO_FN_A18, GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_A19, GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_A20, GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_A21, GPIO_FN_MSIOF0_RSYNC,
-	GPIO_FN_A22, GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_A23, GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_A24, GPIO_FN_MSIOF0_RXD,
-	GPIO_FN_A25, GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_A26,
-	GPIO_FN_FCE1_,
-	GPIO_FN_DACK0,
-	GPIO_FN_FCE0_,
-	GPIO_FN_WAIT_, GPIO_FN_DREQ0,
-	GPIO_FN_FRB,
-	GPIO_FN_CKO,
-	GPIO_FN_NBRSTOUT_,
-	GPIO_FN_NBRST_,
-	GPIO_FN_BBIF2_TXD,
-	GPIO_FN_BBIF2_RXD,
-	GPIO_FN_BBIF2_SYNC,
-	GPIO_FN_BBIF2_SCK,
-	GPIO_FN_MFG3_IN2,
-	GPIO_FN_MFG3_IN1,
-	GPIO_FN_BBIF1_SS2, GPIO_FN_MFG3_OUT1,
-	GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
-	GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
-	GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
-	GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
-	GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK,
-	GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC,
-	GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
-	GPIO_FN_HSI_TX_FLAG,
-	GPIO_FN_VIO_VD, GPIO_FN_VIO2_VD,
-
-	GPIO_FN_VIO_HD,
-	GPIO_FN_VIO2_HD,
-	GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD,
-	GPIO_FN_VIO_D1, GPIO_FN_PORT131_MSIOF2_SS1,
-	GPIO_FN_VIO_D2, GPIO_FN_PORT132_MSIOF2_SS2,
-	GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC,
-	GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD,
-	GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK,
-	GPIO_FN_VIO_D6,
-	GPIO_FN_VIO_D7,
-	GPIO_FN_VIO_D8, GPIO_FN_VIO2_D0,
-	GPIO_FN_VIO_D9, GPIO_FN_VIO2_D1,
-	GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2,
-	GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3,
-	GPIO_FN_VIO_D12, GPIO_FN_VIO2_D4,
-	GPIO_FN_VIO_D13,
-	GPIO_FN_VIO2_D5,
-	GPIO_FN_VIO_D14, GPIO_FN_VIO2_D6,
-	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3,
-	GPIO_FN_VIO2_D7,
-	GPIO_FN_VIO_CLK,
-	GPIO_FN_VIO2_CLK,
-	GPIO_FN_VIO_FIELD, GPIO_FN_VIO2_FIELD,
-	GPIO_FN_VIO_CKO,
-	GPIO_FN_A27, GPIO_FN_MFG0_IN1,
-	GPIO_FN_MFG0_IN2,
-	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
-	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
-	GPIO_FN_MSIOF2_MCK0,
-	GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_PORT156_MSIOF2_SS2,
-	GPIO_FN_PORT157_MSIOF2_RXD,
-	GPIO_FN_DINT_, GPIO_FN_TS_SCK3,
-	GPIO_FN_NMI,
-	GPIO_FN_TPU3TO0,
-	GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_BBIF2_TSCK1,
-	GPIO_FN_BBIF2_TXD1,
-	GPIO_FN_MFG2_OUT2,
-	GPIO_FN_TPU2TO1,
-	GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
-	GPIO_FN_D16,
-	GPIO_FN_D17,
-	GPIO_FN_D18,
-	GPIO_FN_D19,
-	GPIO_FN_D20,
-	GPIO_FN_D21,
-	GPIO_FN_D22,
-	GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
-	GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
-	GPIO_FN_D25,
-	GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
-	GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
-	GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
-	GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
-	GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
-	GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
-	GPIO_FN_DACK2,
-	GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3,
-	GPIO_FN_DACK3,
-	GPIO_FN_PORT218_VIO_CKOR,
-	GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
-	GPIO_FN_DREQ1,
-	GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
-	GPIO_FN_DACK1, GPIO_FN_OVCN,
-	GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3,
-
-	GPIO_FN_OVCN2,
-	GPIO_FN_EXTLP, GPIO_FN_PORT226_VIO_CKO2,
-	GPIO_FN_IDIN,
-	GPIO_FN_MFG1_IN1,
-	GPIO_FN_MSIOF1_TXD,
-	GPIO_FN_MSIOF1_TSYNC,
-	GPIO_FN_MSIOF1_TSCK,
-	GPIO_FN_MSIOF1_RXD,
-	GPIO_FN_MSIOF1_RSCK, GPIO_FN_VIO2_CLK2,
-	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
-	GPIO_FN_MSIOF1_MCK0,
-	GPIO_FN_MSIOF1_MCK1,
-	GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2,
-	GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2,
-	GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
-	GPIO_FN_TPU4TO0,
-	GPIO_FN_MFG4_IN2,
-	GPIO_FN_PORT243_VIO_CKO2,
-	GPIO_FN_MFG2_IN1,
-	GPIO_FN_MSIOF2R_RXD,
-	GPIO_FN_MFG2_IN2,
-	GPIO_FN_MSIOF2R_TXD,
-	GPIO_FN_MFG1_OUT1,
-	GPIO_FN_TPU1TO0,
-	GPIO_FN_MFG3_OUT2,
-	GPIO_FN_TPU3TO1,
-	GPIO_FN_MFG2_OUT1,
-	GPIO_FN_TPU2TO0,
-	GPIO_FN_MSIOF2R_TSCK,
-	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
-	GPIO_FN_MSIOF2R_TSYNC,
-	GPIO_FN_SDHICLK0,
-	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHID0_0,
-	GPIO_FN_SDHID0_1,
-	GPIO_FN_SDHID0_2,
-	GPIO_FN_SDHID0_3,
-	GPIO_FN_SDHICMD0,
-	GPIO_FN_SDHIWP0,
-	GPIO_FN_SDHICLK1,
-	GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
-	GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
-	GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
-	GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
-	GPIO_FN_SDHICMD1,
-	GPIO_FN_SDHICLK2,
-	GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
-	GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
-	GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
-	GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
-	GPIO_FN_SDHICMD2,
-	GPIO_FN_MMCCLK0,
-	GPIO_FN_MMCD0_0,
-	GPIO_FN_MMCD0_1,
-	GPIO_FN_MMCD0_2,
-	GPIO_FN_MMCD0_3,
-	GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
-	GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
-	GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
-	GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
-	GPIO_FN_MMCCMD0,
-	GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
-	GPIO_FN_MCP_WAIT__MCP_FRB,
-	GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
-	GPIO_FN_MCP_D15_MCP_NAF15,
-	GPIO_FN_MCP_D14_MCP_NAF14,
-	GPIO_FN_MCP_D13_MCP_NAF13,
-	GPIO_FN_MCP_D12_MCP_NAF12,
-	GPIO_FN_MCP_D11_MCP_NAF11,
-	GPIO_FN_MCP_D10_MCP_NAF10,
-	GPIO_FN_MCP_D9_MCP_NAF9,
-	GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
-	GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
-
-	GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
-	GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
-	GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
-	GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
-	GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
-	GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
-	GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
-	GPIO_FN_MCP_NBRSTOUT_,
-	GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
-
-	/* MSEL2 special case */
-	GPIO_FN_TSIF2_TS_XX1,
-	GPIO_FN_TSIF2_TS_XX2,
-	GPIO_FN_TSIF2_TS_XX3,
-	GPIO_FN_TSIF2_TS_XX4,
-	GPIO_FN_TSIF2_TS_XX5,
-	GPIO_FN_TSIF1_TS_XX1,
-	GPIO_FN_TSIF1_TS_XX2,
-	GPIO_FN_TSIF1_TS_XX3,
-	GPIO_FN_TSIF1_TS_XX4,
-	GPIO_FN_TSIF1_TS_XX5,
-	GPIO_FN_TSIF0_TS_XX1,
-	GPIO_FN_TSIF0_TS_XX2,
-	GPIO_FN_TSIF0_TS_XX3,
-	GPIO_FN_TSIF0_TS_XX4,
-	GPIO_FN_TSIF0_TS_XX5,
-	GPIO_FN_MST1_TS_XX1,
-	GPIO_FN_MST1_TS_XX2,
-	GPIO_FN_MST1_TS_XX3,
-	GPIO_FN_MST1_TS_XX4,
-	GPIO_FN_MST1_TS_XX5,
-	GPIO_FN_MST0_TS_XX1,
-	GPIO_FN_MST0_TS_XX2,
-	GPIO_FN_MST0_TS_XX3,
-	GPIO_FN_MST0_TS_XX4,
-	GPIO_FN_MST0_TS_XX5,
-
-	/* MSEL3 special cases */
-	GPIO_FN_SDHI0_VCCQ_MC0_ON,
-	GPIO_FN_SDHI0_VCCQ_MC0_OFF,
-	GPIO_FN_DEBUG_MON_VIO,
-	GPIO_FN_DEBUG_MON_LCDD,
-	GPIO_FN_LCDC_LCDC0,
-	GPIO_FN_LCDC_LCDC1,
-
-	/* MSEL4 special cases */
-	GPIO_FN_IRQ9_MEM_INT,
-	GPIO_FN_IRQ9_MCP_INT,
-	GPIO_FN_A11,
-	GPIO_FN_TPU4TO3,
-	GPIO_FN_RESETA_N_PU_ON,
-	GPIO_FN_RESETA_N_PU_OFF,
-	GPIO_FN_EDBGREQ_PD,
-	GPIO_FN_EDBGREQ_PU,
-
-	/* end of GPIO */
-	GPIO_NR,
-};
-
 /* DMA slave IDs */
 enum {
 	SHDMA_SLAVE_INVALID,
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index f2d8744c1f14..c3c4669a2d72 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -1,7 +1,6 @@
 #ifndef ZBOOT_H
 #define ZBOOT_H
 
-#include <asm/mach-types.h>
 #include <mach/zboot_macros.h>
 
 /**************************************************
@@ -11,7 +10,6 @@
  **************************************************/
 
 #ifdef CONFIG_MACH_MACKEREL
-#define MACH_TYPE	MACH_TYPE_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
 #else
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
deleted file mode 100644
index 8871f7717dc8..000000000000
--- a/arch/arm/mach-shmobile/intc-r8a7740.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-static void __init r8a7740_init_irq_common(void)
-{
-	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
-	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
-	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
-
-	/* route signals to GIC */
-	iowrite32(0x0, pfc_inta_ctrl);
-
-	/*
-	 * To mask the shared interrupt to SPI 149 we must ensure to set
-	 * PRIO *and* MASK. Else we run into IRQ floods when registering
-	 * the intc_irqpin devices
-	 */
-	iowrite32(0x0, intc_prio_base + 0x0);
-	iowrite32(0x0, intc_prio_base + 0x4);
-	iowrite32(0x0, intc_prio_base + 0x8);
-	iowrite32(0x0, intc_prio_base + 0xc);
-	iowrite8(0xff, intc_msk_base + 0x0);
-	iowrite8(0xff, intc_msk_base + 0x4);
-	iowrite8(0xff, intc_msk_base + 0x8);
-	iowrite8(0xff, intc_msk_base + 0xc);
-
-	iounmap(intc_prio_base);
-	iounmap(intc_msk_base);
-	iounmap(pfc_inta_ctrl);
-}
-
-void __init r8a7740_init_irq_of(void)
-{
-	irqchip_init();
-	r8a7740_init_irq_common();
-}
-
-void __init r8a7740_init_irq(void)
-{
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	/* initialize the Generic Interrupt Controller PL390 r0p0 */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-	r8a7740_init_irq_common();
-}
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
deleted file mode 100644
index b86dc8908724..000000000000
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * r8a7779 processor support - INTC hardware block
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/irqchip.h>
-#include <mach/common.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define INT2SMSKCR0 IOMEM(0xfe7822a0)
-#define INT2SMSKCR1 IOMEM(0xfe7822a4)
-#define INT2SMSKCR2 IOMEM(0xfe7822a8)
-#define INT2SMSKCR3 IOMEM(0xfe7822ac)
-#define INT2SMSKCR4 IOMEM(0xfe7822b0)
-
-#define INT2NTSR0 IOMEM(0xfe700060)
-#define INT2NTSR1 IOMEM(0xfe700064)
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-void __init r8a7779_init_irq_extpin(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (icr0) {
-		tmp = ioread32(icr0);
-		if (irlm)
-			tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-		else
-			tmp &= ~(1 << 23); /* IRL mode - not supported */
-		tmp |= (1 << 21); /* LVLMODE = 1 */
-		iowrite32(tmp, icr0);
-		iounmap(icr0);
-
-		if (irlm)
-			platform_device_register(&irqpin0_device);
-	} else
-		pr_warn("r8a7779: unable to setup external irq pin mode\n");
-}
-
-static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
-{
-	return 0; /* always allow wakeup */
-}
-
-static void __init r8a7779_init_irq_common(void)
-{
-	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
-
-	/* route all interrupts to ARM */
-	__raw_writel(0xffffffff, INT2NTSR0);
-	__raw_writel(0x3fffffff, INT2NTSR1);
-
-	/* unmask all known interrupts in INTCS2 */
-	__raw_writel(0xfffffff0, INT2SMSKCR0);
-	__raw_writel(0xfff7ffff, INT2SMSKCR1);
-	__raw_writel(0xfffbffdf, INT2SMSKCR2);
-	__raw_writel(0xbffffffc, INT2SMSKCR3);
-	__raw_writel(0x003fee3f, INT2SMSKCR4);
-}
-
-void __init r8a7779_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7779_init_irq_common();
-}
-
-#ifdef CONFIG_OF
-void __init r8a7779_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7779_init_irq_common();
-}
-#endif
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
new file mode 100644
index 000000000000..1da5a72d9642
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -0,0 +1,195 @@
+/*
+ * SMP support for SoCs with APMU
+ *
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+static struct {
+	void __iomem *iomem;
+	int bit;
+} apmu_cpus[CONFIG_NR_CPUS];
+
+#define WUPCR_OFFS 0x10
+#define PSTR_OFFS 0x40
+#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+
+static int apmu_power_on(void __iomem *p, int bit)
+{
+	/* request power on */
+	writel_relaxed(BIT(bit), p + WUPCR_OFFS);
+
+	/* wait for APMU to finish */
+	while (readl_relaxed(p + WUPCR_OFFS) != 0)
+		;
+
+	return 0;
+}
+
+static int apmu_power_off(void __iomem *p, int bit)
+{
+	/* request Core Standby for next WFI */
+	writel_relaxed(3, p + CPUNCR_OFFS(bit));
+	return 0;
+}
+
+static int apmu_power_off_poll(void __iomem *p, int bit)
+{
+	int k;
+
+	for (k = 0; k < 1000; k++) {
+		if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
+{
+	void __iomem *p = apmu_cpus[cpu].iomem;
+
+	return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
+}
+
+static void apmu_init_cpu(struct resource *res, int cpu, int bit)
+{
+	if (apmu_cpus[cpu].iomem)
+		return;
+
+	apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
+	apmu_cpus[cpu].bit = bit;
+
+	pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit,
+		 res->start, resource_size(res));
+}
+
+static struct {
+	struct resource iomem;
+	int cpus[4];
+} apmu_config[] = {
+	{
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.cpus = { 0, 1, 2, 3 },
+	},
+	{
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.cpus = { 0x100, 0x101, 0x102, 0x103 },
+	}
+};
+
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+{
+	u32 id;
+	int k;
+	int bit, index;
+	bool is_allowed;
+
+	for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+		/* only enable the cluster that includes the boot CPU */
+		is_allowed = false;
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				if (id == cpu_logical_map(0))
+					is_allowed = true;
+			}
+		}
+		if (!is_allowed)
+			continue;
+
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				index = get_logical_index(id);
+				if (index >= 0)
+					fn(&apmu_config[k].iomem, index, bit);
+			}
+		}
+	}
+}
+
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+{
+	/* install boot code shared by all CPUs */
+	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+	/* perform per-cpu setup */
+	apmu_parse_cfg(apmu_init_cpu);
+}
+
+int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/* For this particular CPU register boot vector */
+	shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0);
+
+	return apmu_wrap(cpu, apmu_power_on);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* nicked from arch/arm/mach-exynos/hotplug.c */
+static inline void cpu_enter_lowpower_a15(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"       mrc     p15, 0, %0, c1, c0, 0\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 0\n"
+		: "=&r" (v)
+		: "Ir" (CR_C)
+		: "cc");
+
+	flush_cache_louis();
+
+	asm volatile(
+	/*
+	 * Turn off coherency
+	 */
+	"       mrc     p15, 0, %0, c1, c0, 1\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 1\n"
+		: "=&r" (v)
+		: "Ir" (0x40)
+		: "cc");
+
+	isb();
+	dsb();
+}
+
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+	/* For this particular CPU deregister boot vector */
+	shmobile_smp_hook(cpu, 0, 0);
+
+	/* Select next sleep mode using the APMU */
+	apmu_wrap(cpu, apmu_power_off);
+
+	/* Do ARM specific CPU shutdown */
+	cpu_enter_lowpower_a15();
+
+	/* jump to shared mach-shmobile sleep / reset code */
+	shmobile_smp_sleep();
+}
+
+int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
+{
+	return apmu_wrap(cpu, apmu_power_off_poll);
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
new file mode 100644
index 000000000000..673ad6e80869
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -0,0 +1,97 @@
+/*
+ * SMP support for SoCs with SCU covered by mach-shmobile
+ *
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <mach/common.h>
+
+static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
+					  unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		/* For this particular CPU register SCU SMP boot vector */
+		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
+				  (unsigned long)shmobile_scu_base);
+		break;
+	};
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block shmobile_smp_scu_notifier = {
+	.notifier_call = shmobile_smp_scu_notifier_call,
+};
+
+void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
+{
+	/* install boot code shared by all CPUs */
+	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+	/* enable SCU and cache coherency on booting CPU */
+	scu_enable(shmobile_scu_base);
+	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+
+	/* Use CPU notifier for reset vector control */
+	register_cpu_notifier(&shmobile_smp_scu_notifier);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void shmobile_smp_scu_cpu_die(unsigned int cpu)
+{
+	/* For this particular CPU deregister boot vector */
+	shmobile_smp_hook(cpu, 0, 0);
+
+	dsb();
+	flush_cache_all();
+
+	/* disable cache coherency */
+	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
+
+	/* jump to shared mach-shmobile sleep / reset code */
+	shmobile_smp_sleep();
+}
+
+static int shmobile_smp_scu_psr_core_disabled(int cpu)
+{
+	unsigned long mask = SCU_PM_POWEROFF << (cpu * 8);
+
+	if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
+		return 1;
+
+	return 0;
+}
+
+int shmobile_smp_scu_cpu_kill(unsigned int cpu)
+{
+	int k;
+
+	/* this function is running on another CPU than the offline target,
+	 * here we need wait for shutdown code in platform_cpu_die() to
+	 * finish before asking SoC-specific code to power off the CPU core.
+	 */
+	for (k = 0; k < 1000; k++) {
+		if (shmobile_smp_scu_psr_core_disabled(cpu))
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 1f958d7b0bac..9ebc246b8d7d 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,18 +11,28 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
 
-void __init shmobile_smp_init_cpus(unsigned int ncores)
+extern unsigned long shmobile_smp_fn[];
+extern unsigned long shmobile_smp_arg[];
+extern unsigned long shmobile_smp_mpidr[];
+
+void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg)
 {
-	unsigned int i;
+	shmobile_smp_fn[cpu] = 0;
+	flush_cache_all();
 
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
+	shmobile_smp_mpidr[cpu] = cpu_logical_map(cpu);
+	shmobile_smp_fn[cpu] = fn;
+	shmobile_smp_arg[cpu] = arg;
+	flush_cache_all();
+}
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
+#ifdef CONFIG_HOTPLUG_CPU
+int shmobile_smp_cpu_disable(unsigned int cpu)
+{
+	return 0; /* Hotplug of any CPU is supported */
 }
+#endif
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 1ccddd228112..3ad531caf4f0 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
@@ -28,7 +27,6 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
 #include <mach/irqs.h>
@@ -39,13 +37,6 @@
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
-	/* 128K entity map for 0xe0100000 (SMU) */
-	{
-		.virtual	= 0xe0100000,
-		.pfn		= __phys_to_pfn(0xe0100000),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE
-	},
 	/* 2M mapping for SCU + L2 controller */
 	{
 		.virtual	= 0xf0000000,
@@ -63,102 +54,40 @@ void __init emev2_map_io(void)
 
 /* UART */
 static struct resource uart0_resources[] = {
-	[0]	= {
-		.start	= 0xe1020000,
-		.end	= 0xe1020037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 40,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart0_device = {
-	.name		= "serial8250-em",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-	.resource	= uart0_resources,
+	DEFINE_RES_MEM(0xe1020000, 0x38),
+	DEFINE_RES_IRQ(40),
 };
 
 static struct resource uart1_resources[] = {
-	[0]	= {
-		.start	= 0xe1030000,
-		.end	= 0xe1030037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 41,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart1_device = {
-	.name		= "serial8250-em",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-	.resource	= uart1_resources,
+	DEFINE_RES_MEM(0xe1030000, 0x38),
+	DEFINE_RES_IRQ(41),
 };
 
 static struct resource uart2_resources[] = {
-	[0]	= {
-		.start	= 0xe1040000,
-		.end	= 0xe1040037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 42,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart2_device = {
-	.name		= "serial8250-em",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-	.resource	= uart2_resources,
+	DEFINE_RES_MEM(0xe1040000, 0x38),
+	DEFINE_RES_IRQ(42),
 };
 
 static struct resource uart3_resources[] = {
-	[0]	= {
-		.start	= 0xe1050000,
-		.end	= 0xe1050037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 43,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(0xe1050000, 0x38),
+	DEFINE_RES_IRQ(43),
 };
 
-static struct platform_device uart3_device = {
-	.name		= "serial8250-em",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-	.resource	= uart3_resources,
-};
+#define emev2_register_uart(idx)					\
+	platform_device_register_simple("serial8250-em", idx,		\
+					uart##idx##_resources,		\
+					ARRAY_SIZE(uart##idx##_resources))
 
 /* STI */
 static struct resource sti_resources[] = {
-	[0] = {
-		.name	= "STI",
-		.start	= 0xe0180000,
-		.end	= 0xe0180053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 157,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sti_device = {
-	.name		= "em_sti",
-	.id		= 0,
-	.resource	= sti_resources,
-	.num_resources	= ARRAY_SIZE(sti_resources),
+	DEFINE_RES_MEM(0xe0180000, 0x54),
+	DEFINE_RES_IRQ(157),
 };
 
+#define emev2_register_sti()					\
+	platform_device_register_simple("em_sti", 0,		\
+					sti_resources,		\
+					ARRAY_SIZE(sti_resources))
 
 /* GIO */
 static struct gpio_em_config gio0_config = {
@@ -168,36 +97,10 @@ static struct gpio_em_config gio0_config = {
 };
 
 static struct resource gio0_resources[] = {
-	[0] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050000,
-		.end	= 0xe005002b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050040,
-		.end	= 0xe005005f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 99,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 100,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio0_device = {
-	.name		= "em_gio",
-	.id		= 0,
-	.resource	= gio0_resources,
-	.num_resources	= ARRAY_SIZE(gio0_resources),
-	.dev		= {
-		.platform_data	= &gio0_config,
-	},
+	DEFINE_RES_MEM(0xe0050000, 0x2c),
+	DEFINE_RES_MEM(0xe0050040, 0x20),
+	DEFINE_RES_IRQ(99),
+	DEFINE_RES_IRQ(100),
 };
 
 static struct gpio_em_config gio1_config = {
@@ -207,36 +110,10 @@ static struct gpio_em_config gio1_config = {
 };
 
 static struct resource gio1_resources[] = {
-	[0] = {
-		.name	= "GIO_032",
-		.start	= 0xe0050080,
-		.end	= 0xe00500ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_032",
-		.start	= 0xe00500c0,
-		.end	= 0xe00500df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 101,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 102,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio1_device = {
-	.name		= "em_gio",
-	.id		= 1,
-	.resource	= gio1_resources,
-	.num_resources	= ARRAY_SIZE(gio1_resources),
-	.dev		= {
-		.platform_data	= &gio1_config,
-	},
+	DEFINE_RES_MEM(0xe0050080, 0x2c),
+	DEFINE_RES_MEM(0xe00500c0, 0x20),
+	DEFINE_RES_IRQ(101),
+	DEFINE_RES_IRQ(102),
 };
 
 static struct gpio_em_config gio2_config = {
@@ -246,36 +123,10 @@ static struct gpio_em_config gio2_config = {
 };
 
 static struct resource gio2_resources[] = {
-	[0] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050100,
-		.end	= 0xe005012b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050140,
-		.end	= 0xe005015f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 103,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 104,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio2_device = {
-	.name		= "em_gio",
-	.id		= 2,
-	.resource	= gio2_resources,
-	.num_resources	= ARRAY_SIZE(gio2_resources),
-	.dev		= {
-		.platform_data	= &gio2_config,
-	},
+	DEFINE_RES_MEM(0xe0050100, 0x2c),
+	DEFINE_RES_MEM(0xe0050140, 0x20),
+	DEFINE_RES_IRQ(103),
+	DEFINE_RES_IRQ(104),
 };
 
 static struct gpio_em_config gio3_config = {
@@ -285,36 +136,10 @@ static struct gpio_em_config gio3_config = {
 };
 
 static struct resource gio3_resources[] = {
-	[0] = {
-		.name	= "GIO_096",
-		.start	= 0xe0050180,
-		.end	= 0xe00501ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_096",
-		.start	= 0xe00501c0,
-		.end	= 0xe00501df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 105,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 106,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio3_device = {
-	.name		= "em_gio",
-	.id		= 3,
-	.resource	= gio3_resources,
-	.num_resources	= ARRAY_SIZE(gio3_resources),
-	.dev		= {
-		.platform_data	= &gio3_config,
-	},
+	DEFINE_RES_MEM(0xe0050180, 0x2c),
+	DEFINE_RES_MEM(0xe00501c0, 0x20),
+	DEFINE_RES_IRQ(105),
+	DEFINE_RES_IRQ(106),
 };
 
 static struct gpio_em_config gio4_config = {
@@ -324,126 +149,53 @@ static struct gpio_em_config gio4_config = {
 };
 
 static struct resource gio4_resources[] = {
-	[0] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050200,
-		.end	= 0xe005022b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050240,
-		.end	= 0xe005025f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 107,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 108,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0xe0050200, 0x2c),
+	DEFINE_RES_MEM(0xe0050240, 0x20),
+	DEFINE_RES_IRQ(107),
+	DEFINE_RES_IRQ(108),
 };
 
-static struct platform_device gio4_device = {
-	.name		= "em_gio",
-	.id		= 4,
-	.resource	= gio4_resources,
-	.num_resources	= ARRAY_SIZE(gio4_resources),
-	.dev		= {
-		.platform_data	= &gio4_config,
-	},
-};
+#define emev2_register_gio(idx)						\
+	platform_device_register_resndata(&platform_bus, "em_gio",	\
+					  idx, gio##idx##_resources,	\
+					  ARRAY_SIZE(gio##idx##_resources), \
+					  &gio##idx##_config,		\
+					  sizeof(struct gpio_em_config))
 
 static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= 152,
-		.end	= 152,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= 153,
-		.end	= 153,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
+	DEFINE_RES_IRQ(152),
+	DEFINE_RES_IRQ(153),
 };
 
-static struct platform_device *emev2_early_devices[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
-	&sti_device,
-	&gio0_device,
-	&gio1_device,
-	&gio2_device,
-	&gio3_device,
-	&gio4_device,
-	&pmu_device,
-};
+#define emev2_register_pmu()					\
+	platform_device_register_simple("arm-pmu", -1,		\
+					pmu_resources,		\
+					ARRAY_SIZE(pmu_resources))
 
 void __init emev2_add_standard_devices(void)
 {
-	emev2_clock_init();
-
-	platform_add_devices(emev2_early_devices,
-			     ARRAY_SIZE(emev2_early_devices));
-
-	platform_add_devices(emev2_late_devices,
-			     ARRAY_SIZE(emev2_late_devices));
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		emev2_clock_init();
+
+	emev2_register_uart(0);
+	emev2_register_uart(1);
+	emev2_register_uart(2);
+	emev2_register_uart(3);
+	emev2_register_sti();
+	emev2_register_gio(0);
+	emev2_register_gio(1);
+	emev2_register_gio(2);
+	emev2_register_gio(3);
+	emev2_register_gio(4);
+	emev2_register_pmu();
 }
 
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-void __init emev2_add_early_devices(void)
-{
-	emev2_init_delay();
-
-	early_platform_add_devices(emev2_early_devices,
-				   ARRAY_SIZE(emev2_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-void __init emev2_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	/* Static mappings, never released */
-	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
-	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* Use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
 #ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
-	{ }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     emev2_auxdata_lookup, NULL);
-}
 
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
@@ -452,10 +204,8 @@ static const char *emev2_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 000000000000..d4eb509a1c87
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,88 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_DATA(index, baseaddr, irq)					\
+[index] = {								\
+	.type		= PORT_SCIF,					\
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,					\
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
+			  SCSCR_REIE,					\
+	.mapbase	= baseaddr,					\
+	.irqs		= { irq + 1, irq + 2, irq + 3, irq },		\
+}
+
+enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
+	SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
+	SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
+};
+
+static inline void r7s72100_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+void __init r7s72100_add_dt_devices(void)
+{
+	r7s72100_register_scif(SCIF0);
+	r7s72100_register_scif(SCIF1);
+	r7s72100_register_scif(SCIF2);
+	r7s72100_register_scif(SCIF3);
+	r7s72100_register_scif(SCIF4);
+	r7s72100_register_scif(SCIF5);
+	r7s72100_register_scif(SCIF6);
+	r7s72100_register_scif(SCIF7);
+}
+
+void __init r7s72100_init_early(void)
+{
+	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+	"renesas,r7s72100",
+	NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+	.init_early	= r7s72100_init_early,
+	.dt_compat	= r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 7f45c2edbca9..b0f2749071be 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -18,12 +18,14 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
+#include <mach/dma-register.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach/arch.h>
@@ -169,7 +171,26 @@ static const struct resource thermal0_resources[] = {
 					thermal0_resources,		\
 					ARRAY_SIZE(thermal0_resources))
 
-void __init r8a73a4_add_standard_devices(void)
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+	DEFINE_RES_MEM(0xe6130010, 0x0c),
+	DEFINE_RES_MEM(0xe6130000, 0x04),
+	DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+void __init r8a73a4_add_dt_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
 	r8a73a4_register_scif(SCIFA1);
@@ -177,26 +198,122 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_scif(SCIFB1);
 	r8a73a4_register_scif(SCIFB2);
 	r8a73a4_register_scif(SCIFB3);
+	r8a7790_register_cmt(10);
+}
+
+/* DMA */
+static const struct sh_dmae_slave_config dma_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_MMCIF0_TX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF0_RX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_TX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_RX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe2,
+	},
+};
+
+#define DMAE_CHANNEL(a, b)				\
+	{						\
+		.offset         = (a) - 0x20,		\
+		.dmars          = (a) - 0x20 + 0x40,	\
+		.chclr_bit	= (b),			\
+		.chclr_offset	= 0x80 - 0x20,		\
+	}
+
+static const struct sh_dmae_channel dma_channels[] = {
+	DMAE_CHANNEL(0x8000, 0),
+	DMAE_CHANNEL(0x8080, 1),
+	DMAE_CHANNEL(0x8100, 2),
+	DMAE_CHANNEL(0x8180, 3),
+	DMAE_CHANNEL(0x8200, 4),
+	DMAE_CHANNEL(0x8280, 5),
+	DMAE_CHANNEL(0x8300, 6),
+	DMAE_CHANNEL(0x8380, 7),
+	DMAE_CHANNEL(0x8400, 8),
+	DMAE_CHANNEL(0x8480, 9),
+	DMAE_CHANNEL(0x8500, 10),
+	DMAE_CHANNEL(0x8580, 11),
+	DMAE_CHANNEL(0x8600, 12),
+	DMAE_CHANNEL(0x8680, 13),
+	DMAE_CHANNEL(0x8700, 14),
+	DMAE_CHANNEL(0x8780, 15),
+	DMAE_CHANNEL(0x8800, 16),
+	DMAE_CHANNEL(0x8880, 17),
+	DMAE_CHANNEL(0x8900, 18),
+	DMAE_CHANNEL(0x8980, 19),
+};
+
+static const struct sh_dmae_pdata dma_pdata = {
+	.slave		= dma_slaves,
+	.slave_num	= ARRAY_SIZE(dma_slaves),
+	.channel	= dma_channels,
+	.channel_num	= ARRAY_SIZE(dma_channels),
+	.ts_low_shift	= TS_LOW_SHIFT,
+	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
+	.ts_high_shift	= TS_HI_SHIFT,
+	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
+	.ts_shift	= dma_ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
+	.dmaor_init     = DMAOR_DME,
+	.chclr_present	= 1,
+	.chclr_bitwise	= 1,
+};
+
+static struct resource dma_resources[] = {
+	DEFINE_RES_MEM(0xe6700020, 0x89e0),
+	DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+	{
+		/* IRQ for channels 0-19 */
+		.start  = gic_spi(200),
+		.end    = gic_spi(219),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+#define r8a73a4_register_dmac()							\
+	platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0,	\
+				dma_resources, ARRAY_SIZE(dma_resources),	\
+				&dma_pdata, sizeof(dma_pdata))
+
+void __init r8a73a4_add_standard_devices(void)
+{
+	r8a73a4_add_dt_devices();
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
+	r8a73a4_register_dmac();
 }
 
-#ifdef CONFIG_USE_OF
-void __init r8a73a4_add_standard_devices_dt(void)
+void __init r8a73a4_init_early(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
 }
 
+#ifdef CONFIG_USE_OF
+
 static const char *r8a73a4_boards_compat_dt[] __initdata = {
 	"renesas,r8a73a4",
 	NULL,
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a73a4_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
+	.init_early	= r8a73a4_init_early,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00c5a707238b..b7d4b2c3bc29 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
@@ -588,6 +590,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
 		.addr		= 0xfe1f0064,
 		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
 	},
 };
 
@@ -986,16 +998,22 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
-	{ }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+	early_platform_add_devices(r8a7740_early_devices,
+				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
 			    ARRAY_SIZE(r8a7740_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7740_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 void __init r8a7740_init_delay(void)
@@ -1003,6 +1021,36 @@ void __init r8a7740_init_delay(void)
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
 };
 
+void __init r8a7740_init_irq_of(void)
+{
+	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
+	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
+	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+
+	irqchip_init();
+
+	/* route signals to GIC */
+	iowrite32(0x0, pfc_inta_ctrl);
+
+	/*
+	 * To mask the shared interrupt to SPI 149 we must ensure to set
+	 * PRIO *and* MASK. Else we run into IRQ floods when registering
+	 * the intc_irqpin devices
+	 */
+	iowrite32(0x0, intc_prio_base + 0x0);
+	iowrite32(0x0, intc_prio_base + 0x4);
+	iowrite32(0x0, intc_prio_base + 0x8);
+	iowrite32(0x0, intc_prio_base + 0xc);
+	iowrite8(0xff, intc_msk_base + 0x0);
+	iowrite8(0xff, intc_msk_base + 0x4);
+	iowrite8(0xff, intc_msk_base + 0x8);
+	iowrite8(0xff, intc_msk_base + 0xc);
+
+	iounmap(intc_prio_base);
+	iounmap(intc_msk_base);
+	iounmap(pfc_inta_ctrl);
+}
+
 static void __init r8a7740_generic_init(void)
 {
 	r8a7740_clock_init(0);
@@ -1019,7 +1067,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 0174f059eac3..03fcc5974ef9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -24,6 +24,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
@@ -53,7 +54,7 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
 	SCIF_INFO(0xffe40000, gic_iid(0x66)),
 	SCIF_INFO(0xffe41000, gic_iid(0x67)),
 	SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +64,24 @@ static struct plat_sci_port scif_platform_data[] = {
 };
 
 /* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80008, 12),
 	DEFINE_RES_IRQ(gic_iid(0x40)),
 };
 
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
 	.name			= "TMU00",
 	.channel_offset		= 0x4,
 	.timer_bit		= 0,
 	.clockevent_rating	= 200,
 };
 
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80014, 12),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
 };
 
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 	.name			= "TMU01",
 	.channel_offset		= 0x10,
 	.timer_bit		= 1,
@@ -95,43 +96,46 @@ static struct sh_timer_config sh_tmu1_platform_data = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
+int r8a7778_usb_phy_power(bool enable)
 {
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
+	static struct usb_phy *phy = NULL;
+	int ret = 0;
+
+	if (!phy)
+		phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(phy)) {
+		pr_err("kernel doesn't have usb phy driver\n");
+		return PTR_ERR(phy);
+	}
+
+	if (enable)
+		ret = usb_phy_init(phy);
+	else
+		usb_phy_shutdown(phy);
+
+	return ret;
 }
 
 /* USB */
-static struct usb_phy *phy;
-
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
+	int ret = r8a7778_usb_phy_power(true);
+
+	if (ret)
+		return ret;
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	usb_phy_init(phy);
-
 	return 0;
 }
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
+	if (r8a7778_usb_phy_power(false))
 		return;
 
-	usb_phy_shutdown(phy);
-
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 }
@@ -188,32 +192,18 @@ static struct platform_device_info hci##_info __initdata = {	\
 USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
-/* Ether */
-static struct resource ether_resources[] = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
 };
 
 #define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] = {		\
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
 	DEFINE_RES_IRQ(gic_iid(0x87)),					\
 };									\
 									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= GPIO_IRQ_BASE(idx),				\
 	.number_of_pins	= 32,						\
@@ -248,30 +238,6 @@ void __init r8a7778_pinmux_init(void)
 	r8a7778_register_gpio(4);
 };
 
-/* SDHI */
-static struct resource sdhi_resources[] = {
-	/* SDHI0 */
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-	/* SDHI1 */
-	DEFINE_RES_MEM(0xFFE4D000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x78)),
-	/* SDHI2 */
-	DEFINE_RES_MEM(0xFFE4F000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x76)),
-};
-
-void __init r8a7778_sdhi_init(int id,
-			      struct sh_mobile_sdhi_info *info)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_resndata(
-		&platform_bus, "sh_mobile_sdhi", id,
-		sdhi_resources + (2 * id), 2,
-		info, sizeof(*info));
-}
-
 /* I2C */
 static struct resource i2c_resources[] __initdata = {
 	/* I2C0 */
@@ -288,7 +254,7 @@ static struct resource i2c_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x6d)),
 };
 
-void __init r8a7778_add_i2c_device(int id)
+static void __init r8a7778_register_i2c(int id)
 {
 	BUG_ON(id < 0 || id > 3);
 
@@ -310,7 +276,7 @@ static struct resource hspi_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x75)),
 };
 
-void __init r8a7778_add_hspi_device(int id)
+static void __init r8a7778_register_hspi(int id)
 {
 	BUG_ON(id < 0 || id > 2);
 
@@ -319,55 +285,7 @@ void __init r8a7778_add_hspi_device(int id)
 		hspi_resources + (2 * id), 2);
 }
 
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info)
-{
-	platform_device_register_resndata(
-		&platform_bus, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		info, sizeof(*info));
-}
-
-/* VIN */
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.parent		= &platform_bus,				\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-}
-
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-static struct platform_device_info *vin_info_table[] __initdata = {
-	&vin0_info,
-	&vin1_info,
-};
-
-void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
-{
-	BUG_ON(id < 0 || id > 1);
-
-	vin_info_table[id]->data = pdata;
-	vin_info_table[id]->size_data = sizeof(*pdata);
-
-	platform_device_register_full(vin_info_table[id]);
-}
-
-void __init r8a7778_add_standard_devices(void)
+void __init r8a7778_add_dt_devices(void)
 {
 	int i;
 
@@ -391,20 +309,114 @@ void __init r8a7778_add_standard_devices(void)
 	r8a7778_register_tmu(1);
 }
 
-void __init r8a7778_init_late(void)
+/* HPB-DMA */
+
+/* Asynchronous mode register (ASYNCMDR) bits */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 39,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7778_register_hpb_dmae(void)
+{
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
+
+void __init r8a7778_add_standard_devices(void)
 {
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+	r8a7778_add_dt_devices();
+	r8a7778_register_i2c(0);
+	r8a7778_register_i2c(1);
+	r8a7778_register_i2c(2);
+	r8a7778_register_i2c(3);
+	r8a7778_register_hspi(0);
+	r8a7778_register_hspi(1);
+	r8a7778_register_hspi(2);
+
+	r8a7778_register_hpb_dmae();
+}
 
+void __init r8a7778_init_late(void)
+{
 	platform_device_register_full(&ehci_info);
 	platform_device_register_full(&ohci_info);
 }
 
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,
 };
 
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
 	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
 	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -416,7 +428,7 @@ static struct resource irqpin_resources[] = {
 	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
 };
 
-void __init r8a7778_init_irq_extpin(int irlm)
+void __init r8a7778_init_irq_extpin_dt(int irlm)
 {
 	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
 	unsigned long tmp;
@@ -434,7 +446,11 @@ void __init r8a7778_init_irq_extpin(int irlm)
 	tmp |= (1 << 21); /* LVLMODE = 1 */
 	iowrite32(tmp, icr0);
 	iounmap(icr0);
+}
 
+void __init r8a7778_init_irq_extpin(int irlm)
+{
+	r8a7778_init_irq_extpin_dt(irlm);
 	if (irlm)
 		platform_device_register_resndata(
 			&platform_bus, "renesas_intc_irqpin", -1,
@@ -442,17 +458,25 @@ void __init r8a7778_init_irq_extpin(int irlm)
 			&irqpin_platform_data, sizeof(irqpin_platform_data));
 }
 
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
 	BUG_ON(!base);
 
+	irqchip_init();
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -464,43 +488,6 @@ static void __init r8a7778_init_irq_common(void)
 	iounmap(base);
 }
 
-void __init r8a7778_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
-	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
-	{},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7778_auxdata_lookup, NULL);
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
@@ -509,8 +496,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= r8a7778_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 3d8928895503..13049e9d691c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -22,14 +22,17 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
-#include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/otg.h>
@@ -37,7 +40,6 @@
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/pm_runtime.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -69,6 +71,64 @@ void __init r8a7779_map_io(void)
 	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
 }
 
+/* IRQ */
+#define INT2SMSKCR0 IOMEM(0xfe7822a0)
+#define INT2SMSKCR1 IOMEM(0xfe7822a4)
+#define INT2SMSKCR2 IOMEM(0xfe7822a8)
+#define INT2SMSKCR3 IOMEM(0xfe7822ac)
+#define INT2SMSKCR4 IOMEM(0xfe7822b0)
+
+#define INT2NTSR0 IOMEM(0xfe700060)
+#define INT2NTSR1 IOMEM(0xfe700064)
+
+static struct renesas_intc_irqpin_config irqpin0_platform_data __initdata = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+	.sense_bitfield_width = 2,
+};
+
+static struct resource irqpin0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
+	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
+	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
+	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
+	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
+	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
+};
+
+void __init r8a7779_init_irq_extpin_dt(int irlm)
+{
+	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
+	u32 tmp;
+
+	if (!icr0) {
+		pr_warn("r8a7779: unable to setup external irq pin mode\n");
+		return;
+	}
+
+	tmp = ioread32(icr0);
+	if (irlm)
+		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
+	else
+		tmp &= ~(1 << 23); /* IRL mode - not supported */
+	tmp |= (1 << 21); /* LVLMODE = 1 */
+	iowrite32(tmp, icr0);
+	iounmap(icr0);
+}
+
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+	r8a7779_init_irq_extpin_dt(irlm);
+	if (irlm)
+		platform_device_register_resndata(
+			&platform_bus, "renesas_intc_irqpin", -1,
+			irqpin0_resources, ARRAY_SIZE(irqpin0_resources),
+			&irqpin0_platform_data, sizeof(irqpin0_platform_data));
+}
+
+/* PFC/GPIO */
 static struct resource r8a7779_pfc_resources[] = {
 	DEFINE_RES_MEM(0xfffc0000, 0x023c),
 };
@@ -388,15 +448,6 @@ static struct platform_device sata_device = {
 	},
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	[0] = {
-		.start		= 0xffe70800,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
 /* USB */
 static struct usb_phy *phy;
 
@@ -548,7 +599,7 @@ static struct platform_device ohci1_device = {
 };
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	{
 		.start	= 0xfde00000,
 		.end	= 0xfde003ff,
@@ -586,6 +637,158 @@ static struct platform_device_info *vin_info_table[] __initdata = {
 	&vin3_info,
 };
 
+/* HPB-DMA */
+
+/* Asynchronous mode register bits */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MASK		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI		0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK		BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST	BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST	0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MASK		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI		0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK		BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST	BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST	0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MASK		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK		BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST	BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MASK		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK		BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST	BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MASK		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK		BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST	BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MASK		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK		BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST	BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MASK		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK		BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST	BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MASK		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK		BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST	BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MASK		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK		BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST	BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK		BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST	BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK		BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MASK		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI		0	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK		BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST	BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST	0	/* SDHI1 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 44,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7779_register_hpb_dmae(void)
+{
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
+
 static struct platform_device *r8a7779_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -619,6 +822,7 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_devices_dt));
 	platform_add_devices(r8a7779_standard_devices,
 			    ARRAY_SIZE(r8a7779_standard_devices));
+	r8a7779_register_hpb_dmae();
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -629,14 +833,6 @@ void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
 					  pdata, sizeof(*pdata));
 }
 
-void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
-}
-
 void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
 {
 	BUG_ON(id < 0 || id > 3);
@@ -653,8 +849,8 @@ void __init __weak r8a7779_register_twd(void) { }
 void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
-	shmobile_earlytimer_init();
 	r8a7779_register_twd();
+	shmobile_earlytimer_init();
 }
 
 void __init r8a7779_add_early_devices(void)
@@ -697,15 +893,34 @@ void __init r8a7779_init_late(void)
 }
 
 #ifdef CONFIG_USE_OF
+static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
+{
+	return 0; /* always allow wakeup */
+}
+
+void __init r8a7779_init_irq_dt(void)
+{
+	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+
+	irqchip_init();
+
+	/* route all interrupts to ARM */
+	__raw_writel(0xffffffff, INT2NTSR0);
+	__raw_writel(0x3fffffff, INT2NTSR1);
+
+	/* unmask all known interrupts in INTCS2 */
+	__raw_writel(0xfffffff0, INT2SMSKCR0);
+	__raw_writel(0xfff7ffff, INT2SMSKCR1);
+	__raw_writel(0xfffbffdf, INT2SMSKCR2);
+	__raw_writel(0xbffffffc, INT2SMSKCR3);
+	__raw_writel(0x003fee3f, INT2SMSKCR4);
+}
+
 void __init r8a7779_init_delay(void)
 {
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
 }
 
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init r8a7779_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -713,8 +928,7 @@ void __init r8a7779_add_standard_devices_dt(void)
 
 	platform_add_devices(r8a7779_devices_dt,
 			     ARRAY_SIZE(r8a7779_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7779_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *r8a7779_compat_dt[] __initdata = {
@@ -728,7 +942,6 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 28f94752b8ff..c47bcebbcb00 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -19,28 +19,29 @@
  */
 
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
+static const struct gpio_rcar_config					\
+r8a7790_gpio##idx##_platform_data __initconst = {			\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -111,7 +112,7 @@ void __init r8a7790_pinmux_init(void)
 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };
 
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -130,11 +131,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -149,7 +150,37 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
-void __init r8a7790_add_standard_devices(void)
+static const struct resource thermal_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal_resources,		\
+					ARRAY_SIZE(thermal_resources))
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+void __init r8a7790_add_dt_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
 	r8a7790_register_scif(SCIFA1);
@@ -161,36 +192,34 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIF1);
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
-	r8a7790_register_irqc(0);
+	r8a7790_register_cmt(00);
 }
 
-void __init r8a7790_timer_init(void)
+void __init r8a7790_add_standard_devices(void)
 {
-	void __iomem *cntcr;
-
-	/* make sure arch timer is started by setting bit 0 of CNTCT */
-	cntcr = ioremap(0xe6080000, PAGE_SIZE);
-	iowrite32(1, cntcr);
-	iounmap(cntcr);
-
-	shmobile_timer_init();
+	r8a7790_add_dt_devices();
+	r8a7790_register_irqc(0);
+	r8a7790_register_thermal();
 }
 
-#ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
+void __init r8a7790_init_early(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
 }
 
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+#ifdef CONFIG_USE_OF
+
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a7790_add_standard_devices_dt,
-	.init_time	= r8a7790_timer_init,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
new file mode 100644
index 000000000000..d9393d61ee27
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -0,0 +1,184 @@
+/*
+ * r8a7791 processor support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+	SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
+	SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
+	SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
+	SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
+};
+
+static inline void r8a7791_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7791_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+static struct renesas_irqc_config irqc0_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx)					\
+	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+					  idx, irqc##idx##_resources,	\
+					  ARRAY_SIZE(irqc##idx##_resources), \
+					  &irqc##idx##_data,		\
+					  sizeof(struct renesas_irqc_config))
+
+void __init r8a7791_add_dt_devices(void)
+{
+	r8a7791_register_scif(SCIFA0);
+	r8a7791_register_scif(SCIFA1);
+	r8a7791_register_scif(SCIFB0);
+	r8a7791_register_scif(SCIFB1);
+	r8a7791_register_scif(SCIFB2);
+	r8a7791_register_scif(SCIFA2);
+	r8a7791_register_scif(SCIF0);
+	r8a7791_register_scif(SCIF1);
+	r8a7791_register_scif(SCIF2);
+	r8a7791_register_scif(SCIF3);
+	r8a7791_register_scif(SCIF4);
+	r8a7791_register_scif(SCIF5);
+	r8a7791_register_scif(SCIFA3);
+	r8a7791_register_scif(SCIFA4);
+	r8a7791_register_scif(SCIFA5);
+	r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
+	r8a7791_add_dt_devices();
+	r8a7791_register_irqc(0);
+}
+
+void __init r8a7791_init_early(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r8a7791_boards_compat_dt[] __initdata = {
+	"renesas,r8a7791",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= r8a7791_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
new file mode 100644
index 000000000000..5734c24bf6c7
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -0,0 +1,91 @@
+/*
+ * R-Car Generation 2 support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/common.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define MODEMR 0xe6160060
+
+u32 __init rcar_gen2_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
+void __init rcar_gen2_timer_init(void)
+{
+#ifdef CONFIG_ARM_ARCH_TIMER
+	u32 mode = rcar_gen2_read_mode_pins();
+	void __iomem *base;
+	int extal_mhz = 0;
+	u32 freq;
+
+	/* At Linux boot time the r8a7790 arch timer comes up
+	 * with the counter disabled. Moreover, it may also report
+	 * a potentially incorrect fixed 13 MHz frequency. To be
+	 * correct these registers need to be updated to use the
+	 * frequency EXTAL / 2 which can be determined by the MD pins.
+	 */
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		extal_mhz = 15;
+		break;
+	case MD(13):
+		extal_mhz = 20;
+		break;
+	case MD(14):
+		extal_mhz = 26;
+		break;
+	case MD(13) | MD(14):
+		extal_mhz = 30;
+		break;
+	}
+
+	/* The arch timer frequency equals EXTAL / 2 */
+	freq = extal_mhz * (1000000 / 2);
+
+	/* Remap "armgcnt address map" space */
+	base = ioremap(0xe6080000, PAGE_SIZE);
+
+	/* Update registers with correct frequency */
+	iowrite32(freq, base + CNTFID0);
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* make sure arch timer is started by setting bit 0 of CNTCR */
+	iowrite32(1, base + CNTCR);
+	iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
+
+	clocksource_of_init();
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 5502d624aca6..311878391e18 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -35,7 +35,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/sh_ipmmu.h>
 #include <mach/dma-register.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/sh7372.h>
 #include <mach/common.h>
@@ -1147,10 +1146,6 @@ void __init sh7372_add_early_devices_dt(void)
 	shmobile_setup_console();
 }
 
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
 void __init sh7372_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1154,7 @@ void __init sh7372_add_standard_devices_dt(void)
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh7372_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *sh7372_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 96e7ca1e4e11..22de17417fd7 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
@@ -35,7 +34,6 @@
 #include <linux/platform_data/sh_ipmmu.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <mach/dma-register.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
@@ -61,29 +59,16 @@ void __init sh73a0_map_io(void)
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-static struct resource sh73a0_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605801c,
-		.end	= 0xe6058027,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device sh73a0_pfc_device = {
-	.name		= "pfc-sh73a0",
-	.id		= -1,
-	.resource	= sh73a0_pfc_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605801c, 0x000c),
 };
 
 void __init sh73a0_pinmux_init(void)
 {
-	platform_device_register(&sh73a0_pfc_device);
+	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +943,6 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init sh73a0_add_standard_devices_dt(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +952,7 @@ void __init sh73a0_add_standard_devices_dt(void)
 
 	platform_add_devices(sh73a0_devices_dt,
 			     ARRAY_SIZE(sh73a0_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh73a0_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	/* Instantiate cpufreq-cpu0 */
 	platform_device_register_full(&devinfo);
@@ -988,7 +968,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 53f4840e4949..9782862899e8 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -41,6 +41,7 @@
 sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
 
+	.align	2
 	.globl	sh7372_cpu_resume
 sh7372_cpu_resume:
 1:	.space	4
@@ -96,6 +97,7 @@ sh7372_do_idle_sysc:
 1:
 	b      1b
 
+	.align	2
 kernel_flush:
 	.word v7_flush_dcache_all
 #endif
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 22a05a869d25..f2ca92308f75 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -29,6 +29,8 @@
 #include <asm/smp_scu.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
 
 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
@@ -38,32 +40,21 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
+	void __iomem *smu;
 
-	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
-	emev2_set_boot_vector(__pa(shmobile_boot_vector));
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
+	/* Tell ROM loader about our vector (in headsmp.S) */
+	smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	if (smu) {
+		iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+		iounmap(smu);
+	}
 
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
-
-static void __init emev2_smp_init_cpus(void)
-{
-	unsigned int ncores;
-
-	/* setup EMEV2 specific SCU base */
+	/* setup EMEV2 specific SCU bits */
 	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	emev2_clock_init(); /* need ioremapped SMU */
-
-	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
-	shmobile_smp_init_cpus(ncores);
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
 
 struct smp_operations emev2_smp_ops __initdata = {
-	.smp_init_cpus		= emev2_smp_init_cpus,
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9bdf810f2a87..627c1f0d9478 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -84,30 +84,30 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	struct r8a7779_pm_ch *ch = NULL;
-	int ret = -EIO;
+	unsigned int lcpu = cpu_logical_map(cpu);
+	int ret;
 
-	cpu = cpu_logical_map(cpu);
-
-	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
-		ch = r8a7779_ch_cpu[cpu];
+	if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu))
+		ch = r8a7779_ch_cpu[lcpu];
 
 	if (ch)
 		ret = r8a7779_sysc_power_up(ch);
+	else
+		ret = -EIO;
 
 	return ret;
 }
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
-
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+	/* setup r8a7779 specific SCU bits */
+	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 
 	r8a7779_pm_init();
 
@@ -117,56 +117,15 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 	r8a7779_platform_cpu_kill(3);
 }
 
-static void __init r8a7779_smp_init_cpus(void)
-{
-	/* setup r8a7779 specific SCU base */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
-static int r8a7779_scu_psr_core_disabled(int cpu)
-{
-	unsigned long mask = 3 << (cpu * 8);
-
-	if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
-		return 1;
-
-	return 0;
-}
-
 static int r8a7779_cpu_kill(unsigned int cpu)
 {
-	int k;
-
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
-	 */
-	for (k = 0; k < 1000; k++) {
-		if (r8a7779_scu_psr_core_disabled(cpu))
-			return r8a7779_platform_cpu_kill(cpu);
-
-		mdelay(1);
-	}
+	if (shmobile_smp_scu_cpu_kill(cpu))
+		return r8a7779_platform_cpu_kill(cpu);
 
 	return 0;
 }
 
-static void r8a7779_cpu_die(unsigned int cpu)
-{
-	dsb();
-	flush_cache_all();
-
-	/* disable cache coherency */
-	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
-
-	/* Endless loop until power off from r8a7779_cpu_kill() */
-	while (1)
-		cpu_do_idle();
-}
-
 static int r8a7779_cpu_disable(unsigned int cpu)
 {
 	/* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
@@ -175,12 +134,11 @@ static int r8a7779_cpu_disable(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations r8a7779_smp_ops  __initdata = {
-	.smp_init_cpus		= r8a7779_smp_init_cpus,
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= r8a7779_cpu_kill,
-	.cpu_die		= r8a7779_cpu_die,
 	.cpu_disable		= r8a7779_cpu_disable,
+	.cpu_die		= shmobile_smp_scu_cpu_die,
+	.cpu_kill		= r8a7779_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
new file mode 100644
index 000000000000..015e2753de1f
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA7BAR		0x0030
+#define CA15RESCNT	0x0040
+#define CA7RESCNT	0x0044
+#define MERAM		0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar, p + CA7BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA7BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+		       p + CA7RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
new file mode 100644
index 000000000000..2df5bd190fe4
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA15RESCNT	0x0040
+#define RAM		0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* RAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(RAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (RAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index d5fc3ed4e315..13ba36a6831f 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -20,14 +20,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/common.h>
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
-#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 
 #define WUPCR		IOMEM(0xe6151010)
@@ -36,8 +33,6 @@
 #define SBAR		IOMEM(0xe6180020)
 #define APARMBAREA	IOMEM(0xe6f10020)
 
-#define PSTR_SHUTDOWN_MODE	3
-
 #define SH73A0_SCU_BASE 0xf0000000
 
 #ifdef CONFIG_HAVE_ARM_TWD
@@ -50,82 +45,33 @@ void __init sh73a0_register_twd(void)
 
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	cpu = cpu_logical_map(cpu);
+	unsigned int lcpu = cpu_logical_map(cpu);
 
-	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
-		__raw_writel(1 << cpu, WUPCR);	/* wake up */
+	if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3)
+		__raw_writel(1 << lcpu, WUPCR);	/* wake up */
 	else
-		__raw_writel(1 << cpu, SRESCR);	/* reset */
+		__raw_writel(1 << lcpu, SRESCR);	/* reset */
 
 	return 0;
 }
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
-
-	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
+	/* Map the reset vector (in headsmp.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
 	__raw_writel(__pa(shmobile_boot_vector), SBAR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
-
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
 
-static void __init sh73a0_smp_init_cpus(void)
-{
-	/* setup sh73a0 specific SCU base */
+	/* setup sh73a0 specific SCU bits */
 	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static int sh73a0_cpu_kill(unsigned int cpu)
-{
-
-	int k;
-	u32 pstr;
-
-	/*
-	 * wait until the power status register confirms the shutdown of the
-	 * offline target
-	 */
-	for (k = 0; k < 1000; k++) {
-		pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3;
-		if (pstr == PSTR_SHUTDOWN_MODE)
-			return 1;
-
-		mdelay(1);
-	}
-
-	return 0;
-}
-
-static void sh73a0_cpu_die(unsigned int cpu)
-{
-	/* Set power off mode. This takes the CPU out of the MP cluster */
-	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
-
-	/* Enter shutdown mode */
-	cpu_do_idle();
-}
-
-static int sh73a0_cpu_disable(unsigned int cpu)
-{
-	return 0; /* CPU0 and CPU1 supported */
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
-#endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
-	.smp_init_cpus		= sh73a0_smp_init_cpus,
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= sh73a0_cpu_kill,
-	.cpu_die		= sh73a0_cpu_die,
-	.cpu_disable		= sh73a0_cpu_disable,
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_scu_cpu_die,
+	.cpu_kill		= shmobile_smp_scu_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index f321dbeb2379..62d7052d6f21 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -59,7 +59,3 @@ void __init shmobile_earlytimer_init(void)
 	late_time_init = shmobile_late_time_init;
 }
 
-void __init shmobile_timer_init(void)
-{
-	clocksource_of_init();
-}
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index dd86db467521..037100a1563a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -4,7 +4,6 @@ config ARCH_SOCFPGA
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index bfce9641e32f..dd0d49cdbe09 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -14,7 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -107,7 +106,6 @@ static void __init socfpga_cyclone5_init(void)
 {
 	l2x0_of_init(0, ~0UL);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	of_clk_init(NULL);
 	socfpga_init_clocks();
 }
 
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 442917eedff3..ac1710e64d9a 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -7,11 +7,9 @@ menuconfig PLAT_SPEAR
 	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 
 if PLAT_SPEAR
 
@@ -23,7 +21,7 @@ config ARCH_SPEAR13XX
 	select CPU_V7
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 8fe6f0c46480..1217fb598cfd 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -7,9 +7,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
@@ -28,11 +27,10 @@ void __init stih41x_l2x0_init(void)
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
 
-static void __init stih41x_timer_init(void)
+static void __init stih41x_machine_init(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
 	stih41x_l2x0_init();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *stih41x_dt_match[] __initdata = {
@@ -42,7 +40,7 @@ static const char *stih41x_dt_match[] __initdata = {
 };
 
 DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
-	.init_time	= stih41x_timer_init,
+	.init_machine	= stih41x_machine_init,
 	.smp		= smp_ops(sti_smp_ops),
 	.dt_compat	= stih41x_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 5b045e302b43..c9e72c89066a 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,12 +1,14 @@
 config ARCH_SUNXI
 	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select HAVE_SMP
 	select PINCTRL
+	select PINCTRL_SUNXI
 	select SPARSE_IRQ
 	select SUN4I_TIMER
-	select PINCTRL_SUNXI
diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot
deleted file mode 100644
index 46d4cf0841c0..000000000000
--- a/arch/arm/mach-sunxi/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-$(CONFIG_ARCH_SUNXI)	+= 0x40008000
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 38a3c55527c8..61d3a387f01c 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,7 +10,6 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,17 +19,24 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <linux/clk/sunxi.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 
 #define SUN4I_WATCHDOG_CTRL_REG		0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART		(1 << 0)
+#define SUN4I_WATCHDOG_CTRL_RESTART		BIT(0)
 #define SUN4I_WATCHDOG_MODE_REG		0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE		(1 << 0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	(1 << 1)
+#define SUN4I_WATCHDOG_MODE_ENABLE		BIT(0)
+#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	BIT(1)
+
+#define SUN6I_WATCHDOG1_IRQ_REG		0x00
+#define SUN6I_WATCHDOG1_CTRL_REG	0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG	0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
 
 static void __iomem *wdt_base;
 
@@ -56,14 +62,41 @@ static void sun4i_restart(enum reboot_mode mode, const char *cmd)
 	}
 }
 
+static void sun6i_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!wdt_base)
+		return;
+
+	/* Disable interrupts */
+	writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
+
+	/* We want to disable the IRQ and just reset the whole system */
+	writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
+
+	/* Enable timer. The default and lowest interval value is 0.5s */
+	writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+		wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+
+	/* Restart the watchdog. */
+	writel(SUN6I_WATCHDOG1_CTRL_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
+
+	while (1) {
+		mdelay(5);
+		writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+			wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+	}
+}
+
 static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
+	{ .compatible = "allwinner,sun4i-wdt" },
+	{ .compatible = "allwinner,sun6i-wdt" },
 	{ /*sentinel*/ }
 };
 
 static void sunxi_setup_restart(void)
 {
-	const struct of_device_id *of_id;
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, sunxi_restart_ids);
@@ -72,17 +105,6 @@ static void sunxi_setup_restart(void)
 
 	wdt_base = of_iomap(np, 0);
 	WARN(!wdt_base, "failed to map watchdog base address");
-
-	of_id = of_match_node(sunxi_restart_ids, np);
-	WARN(!of_id, "restart function not available");
-
-	arm_pm_restart = of_id->data;
-}
-
-static void __init sunxi_timer_init(void)
-{
-	sunxi_init_clocks();
-	clocksource_of_init();
 }
 
 static void __init sunxi_dt_init(void)
@@ -101,6 +123,28 @@ static const char * const sunxi_board_dt_compat[] = {
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
 	.init_machine	= sunxi_dt_init,
-	.init_time	= sunxi_timer_init,
 	.dt_compat	= sunxi_board_dt_compat,
+	.restart	= sun4i_restart,
+MACHINE_END
+
+static const char * const sun6i_board_dt_compat[] = {
+	"allwinner,sun6i-a31",
+	NULL,
+};
+
+DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun6i_board_dt_compat,
+	.restart	= sun6i_restart,
+MACHINE_END
+
+static const char * const sun7i_board_dt_compat[] = {
+	"allwinner,sun7i-a20",
+	NULL,
+};
+
+DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun7i_board_dt_compat,
+	.restart	= sun4i_restart,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index ef3a8da49b2d..09e740f58b27 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,18 +2,23 @@ config ARCH_TEGRA
 	bool "NVIDIA Tegra" if ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
+	select ARM_GIC
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
+	select PINCTRL
 	select SOC_BUS
 	select SPARSE_IRQ
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_PHY
+	select USB_ULPI_VIEWPORT if USB_PHY
 	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems.
@@ -27,15 +32,9 @@ config ARCH_TEGRA_2x_SOC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_754327 if SMP
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,34 +43,29 @@ config ARCH_TEGRA_3x_SOC
 	bool "Enable support for Tegra30 family"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA30
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
 config ARCH_TEGRA_114_SOC
 	bool "Enable support for Tegra114 family"
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
+	select ARM_ERRATA_798181 if SMP
 	select ARM_L1_CACHE_SHIFT_6
-	select CPU_V7
-	select PINCTRL
+	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA114
 	help
 	  Support for NVIDIA Tegra T114 processor family, based on the
 	  ARM CortexA15MP CPU
 
-config TEGRA_PCI
-	bool "PCI Express support"
-	depends on ARCH_TEGRA_2x_SOC
-	select PCI
+config ARCH_TEGRA_124_SOC
+	bool "Enable support for Tegra124 family"
+	select ARM_L1_CACHE_SHIFT_6
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for NVIDIA Tegra T124 processor family, based on the
+	  ARM CortexA15MP CPU
 
 config TEGRA_AHB
 	bool "Enable AHB driver for NVIDIA Tegra SoCs"
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 98b184efc110..019bb1758662 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,5 @@
 asflags-y				+= -march=armv7-a
 
-obj-y                                   += common.o
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y					+= fuse.o
@@ -17,24 +16,29 @@ obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra20_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= cpuidle-tegra20.o
 endif
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pm-tegra30.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= tegra114_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= pm-tegra30.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= cpuidle-tegra114.o
 endif
-
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-harmony-pcie.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
+ifeq ($(CONFIG_CPU_IDLE),y)
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= cpuidle-tegra114.o
+endif
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index d7aa52ea6cfc..bc471973cf04 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -114,7 +114,7 @@ static int do_dma_transfer(unsigned long apb_add,
 	dma_desc->callback = apb_dma_complete;
 	dma_desc->callback_param = NULL;
 
-	INIT_COMPLETION(tegra_apb_wait);
+	reinit_completion(&tegra_apb_wait);
 
 	dmaengine_submit(dma_desc);
 	dma_async_issue_pending(tegra_apb_dma_chan);
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
deleted file mode 100644
index 035b240b9e15..000000000000
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pcie.c
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/of_gpio.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach-types.h>
-
-#include "board.h"
-
-#ifdef CONFIG_TEGRA_PCI
-
-int __init harmony_pcie_init(void)
-{
-	struct device_node *np;
-	int en_vdd_1v05;
-	struct regulator *regulator = NULL;
-	int err;
-
-	np = of_find_node_by_path("/regulators/regulator@3");
-	if (!np) {
-		pr_err("%s: of_find_node_by_path failed\n", __func__);
-		return -ENODEV;
-	}
-
-	en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
-	if (en_vdd_1v05 < 0) {
-		pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
-		       en_vdd_1v05);
-		return en_vdd_1v05;
-	}
-
-	err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
-	if (err) {
-		pr_err("%s: gpio_request failed: %d\n", __func__, err);
-		return err;
-	}
-
-	gpio_direction_output(en_vdd_1v05, 1);
-
-	regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
-	if (IS_ERR(regulator)) {
-		err = PTR_ERR(regulator);
-		pr_err("%s: regulator_get failed: %d\n", __func__, err);
-		goto err_reg;
-	}
-
-	err = regulator_enable(regulator);
-	if (err) {
-		pr_err("%s: regulator_enable failed: %d\n", __func__, err);
-		goto err_en;
-	}
-
-	err = tegra_pcie_init(true, true);
-	if (err) {
-		pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
-		goto err_pcie;
-	}
-
-	return 0;
-
-err_pcie:
-	regulator_disable(regulator);
-err_en:
-	regulator_put(regulator);
-err_reg:
-	gpio_free(en_vdd_1v05);
-
-	return err;
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 740e16f64728..06f024070dab 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -20,12 +20,11 @@
 #include <linux/platform_device.h>
 #include <linux/rfkill-gpio.h>
 #include "board.h"
-#include "board-paz00.h"
 
 static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
 	.name		= "wifi_rfkill",
-	.reset_gpio	= TEGRA_WIFI_RST,
-	.shutdown_gpio	= TEGRA_WIFI_PWRN,
+	.reset_gpio	= 25, /* PD1 */
+	.shutdown_gpio	= 85, /* PK5 */
 	.type	= RFKILL_TYPE_WLAN,
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
deleted file mode 100644
index 25c08ecef52f..000000000000
--- a/arch/arm/mach-tegra/board-paz00.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.h
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_PAZ00_H
-#define _MACH_TEGRA_BOARD_PAZ00_H
-
-#include "gpio-names.h"
-
-#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
-#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 9a6659fe2dc2..bcf5dbf69d58 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,21 +25,8 @@
 #include <linux/types.h>
 #include <linux/reboot.h>
 
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd);
-
-void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
-void __init tegra_dt_init_irq(void);
-int __init tegra_pcie_init(bool init_port0, bool init_port1);
-
-void tegra_init_late(void);
-
-#ifdef CONFIG_DEBUG_FS
-int tegra_clk_debugfs_init(void);
-#else
-static inline int tegra_clk_debugfs_init(void) { return 0; }
-#endif
 
 int __init tegra_powergate_init(void);
 #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
@@ -48,13 +35,6 @@ int __init tegra_powergate_debugfs_init(void);
 static inline int tegra_powergate_debugfs_init(void) { return 0; }
 #endif
 
-int __init harmony_regulator_init(void);
-#ifdef CONFIG_TEGRA_PCI
-int __init harmony_pcie_init(void);
-#else
-static inline int harmony_pcie_init(void) { return 0; }
-#endif
-
 void __init tegra_paz00_wifikill_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
deleted file mode 100644
index 94a119a35af8..000000000000
--- a/arch/arm/mach-tegra/common.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/arm/mach-tegra/common.c
- *
- * Copyright (c) 2013 NVIDIA Corporation. All rights reserved.
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include "board.h"
-#include "common.h"
-#include "cpuidle.h"
-#include "fuse.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pmc.h"
-#include "apbio.h"
-#include "sleep.h"
-#include "pm.h"
-#include "reset.h"
-
-/*
- * Storage for debug-macro.S's state.
- *
- * This must be in .data not .bss so that it gets initialized each time the
- * kernel is loaded. The data is declared here rather than debug-macro.S so
- * that multiple inclusions of debug-macro.S point at the same data.
- */
-u32 tegra_uart_config[4] = {
-	/* Debug UART initialization required */
-	1,
-	/* Debug UART physical address */
-	0,
-	/* Debug UART virtual address */
-	0,
-	/* Scratch space for debug macro */
-	0,
-};
-
-#ifdef CONFIG_OF
-void __init tegra_dt_init_irq(void)
-{
-	of_clk_init(NULL);
-	tegra_pmc_init();
-	tegra_init_irq();
-	irqchip_init();
-	tegra_legacy_irq_syscore_init();
-}
-#endif
-
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
-	u32 reg;
-
-	reg = readl_relaxed(reset);
-	reg |= 0x10;
-	writel_relaxed(reg, reset);
-}
-
-static void __init tegra_init_cache(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	int ret;
-	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
-	u32 aux_ctrl, cache_type;
-
-	cache_type = readl(p + L2X0_CACHE_TYPE);
-	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x7C400001;
-
-	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
-	if (!ret)
-		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
-#endif
-
-}
-
-void __init tegra_init_early(void)
-{
-	tegra_cpu_reset_handler_init();
-	tegra_apb_io_init();
-	tegra_init_fuse();
-	tegra_init_cache();
-	tegra_powergate_init();
-	tegra_hotplug_init();
-}
-
-void __init tegra_init_late(void)
-{
-	tegra_init_suspend();
-	tegra_cpuidle_init();
-	tegra_powergate_debugfs_init();
-}
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 32f8eb3fe344..5900cc44f780 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
-extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 1d1c6023f4a2..e0b87300243d 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -17,15 +17,64 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/clockchips.h>
 
 #include <asm/cpuidle.h>
+#include <asm/suspend.h>
+#include <asm/smp_plat.h>
+
+#include "pm.h"
+#include "sleep.h"
+
+#ifdef CONFIG_PM_SLEEP
+#define TEGRA114_MAX_STATES 2
+#else
+#define TEGRA114_MAX_STATES 1
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra114_idle_power_down(struct cpuidle_device *dev,
+				    struct cpuidle_driver *drv,
+				    int index)
+{
+	local_fiq_disable();
+
+	tegra_set_cpu_in_lp2();
+	cpu_pm_enter();
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
+
+	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
+
+	cpu_pm_exit();
+	tegra_clear_cpu_in_lp2();
+
+	local_fiq_enable();
+
+	return index;
+}
+#endif
 
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.state_count = 1,
+	.state_count = TEGRA114_MAX_STATES,
 	.states = {
 		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
+#ifdef CONFIG_PM_SLEEP
+		[1] = {
+			.enter			= tegra114_idle_power_down,
+			.exit_latency		= 500,
+			.target_residency	= 1000,
+			.power_usage		= 0,
+			.flags			= CPUIDLE_FLAG_TIME_VALID,
+			.name			= "powered-down",
+			.desc			= "CPU power gated",
+		},
+#endif
 	},
 };
 
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index 706aa4215c36..b82dcaee2ef4 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -211,6 +211,18 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 }
 #endif
 
+/*
+ * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
+ * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
+ * this, simply disable LP2 if the PCI driver and DT node are both enabled.
+ */
+void tegra20_cpuidle_pcie_irqs_in_use(void)
+{
+	pr_info_once(
+		"Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
+	tegra_idle_driver.states[1].disabled = true;
+}
+
 int __init tegra20_cpuidle_init(void)
 {
 	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index e85973cef037..7bc5d8d667fe 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -39,8 +39,20 @@ void __init tegra_cpuidle_init(void)
 			tegra30_cpuidle_init();
 		break;
 	case TEGRA114:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra114_cpuidle_init();
 		break;
 	}
 }
+
+void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_cpuidle_pcie_irqs_in_use();
+		break;
+	}
+}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
index 9ec2c1ab0fa4..c017dab60ffa 100644
--- a/arch/arm/mach-tegra/cpuidle.h
+++ b/arch/arm/mach-tegra/cpuidle.h
@@ -19,6 +19,7 @@
 
 #ifdef CONFIG_CPU_IDLE
 int tegra20_cpuidle_init(void);
+void tegra20_cpuidle_pcie_irqs_in_use(void);
 int tegra30_cpuidle_init(void);
 int tegra114_cpuidle_init(void);
 void tegra_cpuidle_init(void);
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index b477ef310dcd..ce8ab8abf061 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -86,6 +86,8 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
 		reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
 		break;
 	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
@@ -123,6 +125,8 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
 		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
 		break;
 	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h
index 7a29bae799a7..c89aac60a143 100644
--- a/arch/arm/mach-tegra/flowctrl.h
+++ b/arch/arm/mach-tegra/flowctrl.h
@@ -28,9 +28,18 @@
 #define FLOW_CTRL_SCLK_RESUME		(1 << 27)
 #define FLOW_CTRL_HALT_CPU_IRQ		(1 << 10)
 #define	FLOW_CTRL_HALT_CPU_FIQ		(1 << 8)
+#define FLOW_CTRL_HALT_LIC_IRQ		(1 << 11)
+#define FLOW_CTRL_HALT_LIC_FIQ		(1 << 10)
+#define FLOW_CTRL_HALT_GIC_IRQ		(1 << 9)
+#define FLOW_CTRL_HALT_GIC_FIQ		(1 << 8)
 #define FLOW_CTRL_CPU0_CSR		0x8
 #define	FLOW_CTRL_CSR_INTR_FLAG		(1 << 15)
 #define FLOW_CTRL_CSR_EVENT_FLAG	(1 << 14)
+#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL	(1 << 13)
+#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU	(1 << 12)
+#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \
+		FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \
+		FLOW_CTRL_CSR_ENABLE_EXT_CRAIL)
 #define FLOW_CTRL_CSR_ENABLE		(1 << 0)
 #define FLOW_CTRL_HALT_CPU1_EVENTS	0x14
 #define FLOW_CTRL_CPU1_CSR		0x18
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index e035cd284a6e..d4639c506622 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -21,14 +21,26 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/random.h>
 #include <linux/tegra-soc.h>
 
 #include "fuse.h"
 #include "iomap.h"
 #include "apbio.h"
 
+/* Tegra20 only */
 #define FUSE_UID_LOW		0x108
 #define FUSE_UID_HIGH		0x10c
+
+/* Tegra30 and later */
+#define FUSE_VENDOR_CODE	0x200
+#define FUSE_FAB_CODE		0x204
+#define FUSE_LOT_CODE_0		0x208
+#define FUSE_LOT_CODE_1		0x20c
+#define FUSE_WAFER_ID		0x210
+#define FUSE_X_COORDINATE	0x214
+#define FUSE_Y_COORDINATE	0x218
+
 #define FUSE_SKU_INFO		0x110
 
 #define TEGRA20_FUSE_SPARE_BIT		0x200
@@ -112,21 +124,51 @@ u32 tegra_read_chipid(void)
 	return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
 }
 
-void tegra_init_fuse(void)
+static void __init tegra20_fuse_init_randomness(void)
+{
+	u32 randomness[2];
+
+	randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
+	randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+/* Applies to Tegra30 or later */
+static void __init tegra30_fuse_init_randomness(void)
+{
+	u32 randomness[7];
+
+	randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
+	randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
+	randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
+	randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
+	randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
+	randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
+	randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+void __init tegra_init_fuse(void)
 {
 	u32 id;
+	u32 randomness[5];
 
 	u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 	reg |= 1 << 28;
 	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 
 	reg = tegra_fuse_readl(FUSE_SKU_INFO);
+	randomness[0] = reg;
 	tegra_sku_id = reg & 0xFF;
 
 	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+	randomness[1] = reg;
 	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
 
 	id = tegra_read_chipid();
+	randomness[2] = id;
 	tegra_chip_id = (id >> 8) & 0xff;
 
 	switch (tegra_chip_id) {
@@ -149,6 +191,18 @@ void tegra_init_fuse(void)
 
 	tegra_revision = tegra_get_revision(id);
 	tegra_init_speedo_data();
+	randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
+	randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
+
+	add_device_randomness(randomness, sizeof(randomness));
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		tegra20_fuse_init_randomness();
+	case TEGRA30:
+	case TEGRA114:
+	default:
+		tegra30_fuse_init_randomness();
+	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
 		tegra_revision_name[tegra_revision],
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index def79683bef6..c01d04785d67 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -29,6 +29,7 @@
 #define TEGRA20		0x20
 #define TEGRA30		0x30
 #define TEGRA114	0x35
+#define TEGRA124	0x40
 
 #ifndef __ASSEMBLY__
 enum tegra_revision {
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
deleted file mode 100644
index f28220a641b2..000000000000
--- a/arch/arm/mach-tegra/gpio-names.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio-names.h
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TEGRA_GPIO_NAMES_H
-#define __MACH_TEGRA_GPIO_NAMES_H
-
-#define TEGRA_GPIO_PA0		0
-#define TEGRA_GPIO_PA1		1
-#define TEGRA_GPIO_PA2		2
-#define TEGRA_GPIO_PA3		3
-#define TEGRA_GPIO_PA4		4
-#define TEGRA_GPIO_PA5		5
-#define TEGRA_GPIO_PA6		6
-#define TEGRA_GPIO_PA7		7
-#define TEGRA_GPIO_PB0		8
-#define TEGRA_GPIO_PB1		9
-#define TEGRA_GPIO_PB2		10
-#define TEGRA_GPIO_PB3		11
-#define TEGRA_GPIO_PB4		12
-#define TEGRA_GPIO_PB5		13
-#define TEGRA_GPIO_PB6		14
-#define TEGRA_GPIO_PB7		15
-#define TEGRA_GPIO_PC0		16
-#define TEGRA_GPIO_PC1		17
-#define TEGRA_GPIO_PC2		18
-#define TEGRA_GPIO_PC3		19
-#define TEGRA_GPIO_PC4		20
-#define TEGRA_GPIO_PC5		21
-#define TEGRA_GPIO_PC6		22
-#define TEGRA_GPIO_PC7		23
-#define TEGRA_GPIO_PD0		24
-#define TEGRA_GPIO_PD1		25
-#define TEGRA_GPIO_PD2		26
-#define TEGRA_GPIO_PD3		27
-#define TEGRA_GPIO_PD4		28
-#define TEGRA_GPIO_PD5		29
-#define TEGRA_GPIO_PD6		30
-#define TEGRA_GPIO_PD7		31
-#define TEGRA_GPIO_PE0		32
-#define TEGRA_GPIO_PE1		33
-#define TEGRA_GPIO_PE2		34
-#define TEGRA_GPIO_PE3		35
-#define TEGRA_GPIO_PE4		36
-#define TEGRA_GPIO_PE5		37
-#define TEGRA_GPIO_PE6		38
-#define TEGRA_GPIO_PE7		39
-#define TEGRA_GPIO_PF0		40
-#define TEGRA_GPIO_PF1		41
-#define TEGRA_GPIO_PF2		42
-#define TEGRA_GPIO_PF3		43
-#define TEGRA_GPIO_PF4		44
-#define TEGRA_GPIO_PF5		45
-#define TEGRA_GPIO_PF6		46
-#define TEGRA_GPIO_PF7		47
-#define TEGRA_GPIO_PG0		48
-#define TEGRA_GPIO_PG1		49
-#define TEGRA_GPIO_PG2		50
-#define TEGRA_GPIO_PG3		51
-#define TEGRA_GPIO_PG4		52
-#define TEGRA_GPIO_PG5		53
-#define TEGRA_GPIO_PG6		54
-#define TEGRA_GPIO_PG7		55
-#define TEGRA_GPIO_PH0		56
-#define TEGRA_GPIO_PH1		57
-#define TEGRA_GPIO_PH2		58
-#define TEGRA_GPIO_PH3		59
-#define TEGRA_GPIO_PH4		60
-#define TEGRA_GPIO_PH5		61
-#define TEGRA_GPIO_PH6		62
-#define TEGRA_GPIO_PH7		63
-#define TEGRA_GPIO_PI0		64
-#define TEGRA_GPIO_PI1		65
-#define TEGRA_GPIO_PI2		66
-#define TEGRA_GPIO_PI3		67
-#define TEGRA_GPIO_PI4		68
-#define TEGRA_GPIO_PI5		69
-#define TEGRA_GPIO_PI6		70
-#define TEGRA_GPIO_PI7		71
-#define TEGRA_GPIO_PJ0		72
-#define TEGRA_GPIO_PJ1		73
-#define TEGRA_GPIO_PJ2		74
-#define TEGRA_GPIO_PJ3		75
-#define TEGRA_GPIO_PJ4		76
-#define TEGRA_GPIO_PJ5		77
-#define TEGRA_GPIO_PJ6		78
-#define TEGRA_GPIO_PJ7		79
-#define TEGRA_GPIO_PK0		80
-#define TEGRA_GPIO_PK1		81
-#define TEGRA_GPIO_PK2		82
-#define TEGRA_GPIO_PK3		83
-#define TEGRA_GPIO_PK4		84
-#define TEGRA_GPIO_PK5		85
-#define TEGRA_GPIO_PK6		86
-#define TEGRA_GPIO_PK7		87
-#define TEGRA_GPIO_PL0		88
-#define TEGRA_GPIO_PL1		89
-#define TEGRA_GPIO_PL2		90
-#define TEGRA_GPIO_PL3		91
-#define TEGRA_GPIO_PL4		92
-#define TEGRA_GPIO_PL5		93
-#define TEGRA_GPIO_PL6		94
-#define TEGRA_GPIO_PL7		95
-#define TEGRA_GPIO_PM0		96
-#define TEGRA_GPIO_PM1		97
-#define TEGRA_GPIO_PM2		98
-#define TEGRA_GPIO_PM3		99
-#define TEGRA_GPIO_PM4		100
-#define TEGRA_GPIO_PM5		101
-#define TEGRA_GPIO_PM6		102
-#define TEGRA_GPIO_PM7		103
-#define TEGRA_GPIO_PN0		104
-#define TEGRA_GPIO_PN1		105
-#define TEGRA_GPIO_PN2		106
-#define TEGRA_GPIO_PN3		107
-#define TEGRA_GPIO_PN4		108
-#define TEGRA_GPIO_PN5		109
-#define TEGRA_GPIO_PN6		110
-#define TEGRA_GPIO_PN7		111
-#define TEGRA_GPIO_PO0		112
-#define TEGRA_GPIO_PO1		113
-#define TEGRA_GPIO_PO2		114
-#define TEGRA_GPIO_PO3		115
-#define TEGRA_GPIO_PO4		116
-#define TEGRA_GPIO_PO5		117
-#define TEGRA_GPIO_PO6		118
-#define TEGRA_GPIO_PO7		119
-#define TEGRA_GPIO_PP0		120
-#define TEGRA_GPIO_PP1		121
-#define TEGRA_GPIO_PP2		122
-#define TEGRA_GPIO_PP3		123
-#define TEGRA_GPIO_PP4		124
-#define TEGRA_GPIO_PP5		125
-#define TEGRA_GPIO_PP6		126
-#define TEGRA_GPIO_PP7		127
-#define TEGRA_GPIO_PQ0		128
-#define TEGRA_GPIO_PQ1		129
-#define TEGRA_GPIO_PQ2		130
-#define TEGRA_GPIO_PQ3		131
-#define TEGRA_GPIO_PQ4		132
-#define TEGRA_GPIO_PQ5		133
-#define TEGRA_GPIO_PQ6		134
-#define TEGRA_GPIO_PQ7		135
-#define TEGRA_GPIO_PR0		136
-#define TEGRA_GPIO_PR1		137
-#define TEGRA_GPIO_PR2		138
-#define TEGRA_GPIO_PR3		139
-#define TEGRA_GPIO_PR4		140
-#define TEGRA_GPIO_PR5		141
-#define TEGRA_GPIO_PR6		142
-#define TEGRA_GPIO_PR7		143
-#define TEGRA_GPIO_PS0		144
-#define TEGRA_GPIO_PS1		145
-#define TEGRA_GPIO_PS2		146
-#define TEGRA_GPIO_PS3		147
-#define TEGRA_GPIO_PS4		148
-#define TEGRA_GPIO_PS5		149
-#define TEGRA_GPIO_PS6		150
-#define TEGRA_GPIO_PS7		151
-#define TEGRA_GPIO_PT0		152
-#define TEGRA_GPIO_PT1		153
-#define TEGRA_GPIO_PT2		154
-#define TEGRA_GPIO_PT3		155
-#define TEGRA_GPIO_PT4		156
-#define TEGRA_GPIO_PT5		157
-#define TEGRA_GPIO_PT6		158
-#define TEGRA_GPIO_PT7		159
-#define TEGRA_GPIO_PU0		160
-#define TEGRA_GPIO_PU1		161
-#define TEGRA_GPIO_PU2		162
-#define TEGRA_GPIO_PU3		163
-#define TEGRA_GPIO_PU4		164
-#define TEGRA_GPIO_PU5		165
-#define TEGRA_GPIO_PU6		166
-#define TEGRA_GPIO_PU7		167
-#define TEGRA_GPIO_PV0		168
-#define TEGRA_GPIO_PV1		169
-#define TEGRA_GPIO_PV2		170
-#define TEGRA_GPIO_PV3		171
-#define TEGRA_GPIO_PV4		172
-#define TEGRA_GPIO_PV5		173
-#define TEGRA_GPIO_PV6		174
-#define TEGRA_GPIO_PV7		175
-#define TEGRA_GPIO_PW0		176
-#define TEGRA_GPIO_PW1		177
-#define TEGRA_GPIO_PW2		178
-#define TEGRA_GPIO_PW3		179
-#define TEGRA_GPIO_PW4		180
-#define TEGRA_GPIO_PW5		181
-#define TEGRA_GPIO_PW6		182
-#define TEGRA_GPIO_PW7		183
-#define TEGRA_GPIO_PX0		184
-#define TEGRA_GPIO_PX1		185
-#define TEGRA_GPIO_PX2		186
-#define TEGRA_GPIO_PX3		187
-#define TEGRA_GPIO_PX4		188
-#define TEGRA_GPIO_PX5		189
-#define TEGRA_GPIO_PX6		190
-#define TEGRA_GPIO_PX7		191
-#define TEGRA_GPIO_PY0		192
-#define TEGRA_GPIO_PY1		193
-#define TEGRA_GPIO_PY2		194
-#define TEGRA_GPIO_PY3		195
-#define TEGRA_GPIO_PY4		196
-#define TEGRA_GPIO_PY5		197
-#define TEGRA_GPIO_PY6		198
-#define TEGRA_GPIO_PY7		199
-#define TEGRA_GPIO_PZ0		200
-#define TEGRA_GPIO_PZ1		201
-#define TEGRA_GPIO_PZ2		202
-#define TEGRA_GPIO_PZ3		203
-#define TEGRA_GPIO_PZ4		204
-#define TEGRA_GPIO_PZ5		205
-#define TEGRA_GPIO_PZ6		206
-#define TEGRA_GPIO_PZ7		207
-#define TEGRA_GPIO_PAA0		208
-#define TEGRA_GPIO_PAA1		209
-#define TEGRA_GPIO_PAA2		210
-#define TEGRA_GPIO_PAA3		211
-#define TEGRA_GPIO_PAA4		212
-#define TEGRA_GPIO_PAA5		213
-#define TEGRA_GPIO_PAA6		214
-#define TEGRA_GPIO_PAA7		215
-#define TEGRA_GPIO_PBB0		216
-#define TEGRA_GPIO_PBB1		217
-#define TEGRA_GPIO_PBB2		218
-#define TEGRA_GPIO_PBB3		219
-#define TEGRA_GPIO_PBB4		220
-#define TEGRA_GPIO_PBB5		221
-#define TEGRA_GPIO_PBB6		222
-#define TEGRA_GPIO_PBB7		223
-
-#endif
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 045c16f2dd51..2072e7322c39 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -6,6 +6,7 @@
         .section ".text.head", "ax"
 
 ENTRY(tegra_secondary_startup)
-        bl      v7_invalidate_l1
+        check_cpu_part_num 0xc09, r8, r9
+        bleq    v7_invalidate_l1
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a52c10e0a857..ff26af26bd0c 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu)
 void __ref tegra_cpu_die(unsigned int cpu)
 {
 	/* Clean L1 data cache */
-	tegra_disable_clean_inv_dcache();
+	tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
 
 	/* Shut down the current CPU. */
 	tegra_hotplug_shutdown();
@@ -46,17 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu)
 	BUG();
 }
 
-int tegra_cpu_disable(unsigned int cpu)
-{
-	switch (tegra_chip_id) {
-	case TEGRA20:
-	case TEGRA30:
-		return cpu == 0 ? -EPERM : 0;
-	default:
-		return 0;
-	}
-}
-
 void __init tegra_hotplug_init(void)
 {
 	if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
@@ -68,4 +57,6 @@ void __init tegra_hotplug_init(void)
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 }
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 399fbca27102..26b1c2ad0ceb 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -24,42 +24,12 @@
 #define TEGRA_IRAM_BASE			0x40000000
 #define TEGRA_IRAM_SIZE			SZ_256K
 
-#define TEGRA_HOST1X_BASE		0x50000000
-#define TEGRA_HOST1X_SIZE		0x24000
-
 #define TEGRA_ARM_PERIF_BASE		0x50040000
 #define TEGRA_ARM_PERIF_SIZE		SZ_8K
 
-#define TEGRA_ARM_PL310_BASE		0x50043000
-#define TEGRA_ARM_PL310_SIZE		SZ_4K
-
 #define TEGRA_ARM_INT_DIST_BASE		0x50041000
 #define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
 
-#define TEGRA_MPE_BASE			0x54040000
-#define TEGRA_MPE_SIZE			SZ_256K
-
-#define TEGRA_VI_BASE			0x54080000
-#define TEGRA_VI_SIZE			SZ_256K
-
-#define TEGRA_ISP_BASE			0x54100000
-#define TEGRA_ISP_SIZE			SZ_256K
-
-#define TEGRA_DISPLAY_BASE		0x54200000
-#define TEGRA_DISPLAY_SIZE		SZ_256K
-
-#define TEGRA_DISPLAY2_BASE		0x54240000
-#define TEGRA_DISPLAY2_SIZE		SZ_256K
-
-#define TEGRA_HDMI_BASE			0x54280000
-#define TEGRA_HDMI_SIZE			SZ_256K
-
-#define TEGRA_GART_BASE			0x58000000
-#define TEGRA_GART_SIZE			SZ_32M
-
-#define TEGRA_RES_SEMA_BASE		0x60001000
-#define TEGRA_RES_SEMA_SIZE		SZ_4K
-
 #define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
 #define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
 
@@ -96,51 +66,15 @@
 #define TEGRA_FLOW_CTRL_BASE		0x60007000
 #define TEGRA_FLOW_CTRL_SIZE		20
 
-#define TEGRA_AHB_DMA_BASE		0x60008000
-#define TEGRA_AHB_DMA_SIZE		SZ_4K
-
-#define TEGRA_AHB_DMA_CH0_BASE		0x60009000
-#define TEGRA_AHB_DMA_CH0_SIZE		32
-
-#define TEGRA_APB_DMA_BASE		0x6000A000
-#define TEGRA_APB_DMA_SIZE		SZ_4K
-
-#define TEGRA_APB_DMA_CH0_BASE		0x6000B000
-#define TEGRA_APB_DMA_CH0_SIZE		32
-
-#define TEGRA_AHB_GIZMO_BASE		0x6000C004
-#define TEGRA_AHB_GIZMO_SIZE		0x10C
-
 #define TEGRA_SB_BASE			0x6000C200
 #define TEGRA_SB_SIZE			256
 
-#define TEGRA_STATMON_BASE		0x6000C400
-#define TEGRA_STATMON_SIZE		SZ_1K
-
-#define TEGRA_GPIO_BASE			0x6000D000
-#define TEGRA_GPIO_SIZE			SZ_4K
-
 #define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
 #define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
 
 #define TEGRA_APB_MISC_BASE		0x70000000
 #define TEGRA_APB_MISC_SIZE		SZ_4K
 
-#define TEGRA_APB_MISC_DAS_BASE		0x70000c00
-#define TEGRA_APB_MISC_DAS_SIZE		SZ_128
-
-#define TEGRA_AC97_BASE			0x70002000
-#define TEGRA_AC97_SIZE			SZ_512
-
-#define TEGRA_SPDIF_BASE		0x70002400
-#define TEGRA_SPDIF_SIZE		SZ_512
-
-#define TEGRA_I2S1_BASE			0x70002800
-#define TEGRA_I2S1_SIZE			SZ_256
-
-#define TEGRA_I2S2_BASE			0x70002A00
-#define TEGRA_I2S2_SIZE			SZ_256
-
 #define TEGRA_UARTA_BASE		0x70006000
 #define TEGRA_UARTA_SIZE		SZ_64
 
@@ -156,101 +90,26 @@
 #define TEGRA_UARTE_BASE		0x70006400
 #define TEGRA_UARTE_SIZE		SZ_256
 
-#define TEGRA_NAND_BASE			0x70008000
-#define TEGRA_NAND_SIZE			SZ_256
-
-#define TEGRA_HSMMC_BASE		0x70008500
-#define TEGRA_HSMMC_SIZE		SZ_256
-
-#define TEGRA_SNOR_BASE			0x70009000
-#define TEGRA_SNOR_SIZE			SZ_4K
-
-#define TEGRA_PWFM_BASE			0x7000A000
-#define TEGRA_PWFM_SIZE			SZ_256
-
-#define TEGRA_PWFM0_BASE		0x7000A000
-#define TEGRA_PWFM0_SIZE		4
-
-#define TEGRA_PWFM1_BASE		0x7000A010
-#define TEGRA_PWFM1_SIZE		4
-
-#define TEGRA_PWFM2_BASE		0x7000A020
-#define TEGRA_PWFM2_SIZE		4
-
-#define TEGRA_PWFM3_BASE		0x7000A030
-#define TEGRA_PWFM3_SIZE		4
-
-#define TEGRA_MIPI_BASE			0x7000B000
-#define TEGRA_MIPI_SIZE			SZ_256
-
-#define TEGRA_I2C_BASE			0x7000C000
-#define TEGRA_I2C_SIZE			SZ_256
-
-#define TEGRA_TWC_BASE			0x7000C100
-#define TEGRA_TWC_SIZE			SZ_256
-
-#define TEGRA_SPI_BASE			0x7000C380
-#define TEGRA_SPI_SIZE			48
-
-#define TEGRA_I2C2_BASE			0x7000C400
-#define TEGRA_I2C2_SIZE			SZ_256
-
-#define TEGRA_I2C3_BASE			0x7000C500
-#define TEGRA_I2C3_SIZE			SZ_256
-
-#define TEGRA_OWR_BASE			0x7000C600
-#define TEGRA_OWR_SIZE			80
-
-#define TEGRA_DVC_BASE			0x7000D000
-#define TEGRA_DVC_SIZE			SZ_512
-
-#define TEGRA_SPI1_BASE			0x7000D400
-#define TEGRA_SPI1_SIZE			SZ_512
-
-#define TEGRA_SPI2_BASE			0x7000D600
-#define TEGRA_SPI2_SIZE			SZ_512
-
-#define TEGRA_SPI3_BASE			0x7000D800
-#define TEGRA_SPI3_SIZE			SZ_512
-
-#define TEGRA_SPI4_BASE			0x7000DA00
-#define TEGRA_SPI4_SIZE			SZ_512
-
-#define TEGRA_RTC_BASE			0x7000E000
-#define TEGRA_RTC_SIZE			SZ_256
-
-#define TEGRA_KBC_BASE			0x7000E200
-#define TEGRA_KBC_SIZE			SZ_256
-
 #define TEGRA_PMC_BASE			0x7000E400
 #define TEGRA_PMC_SIZE			SZ_256
 
-#define TEGRA_MC_BASE			0x7000F000
-#define TEGRA_MC_SIZE			SZ_1K
-
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
 #define TEGRA_FUSE_BASE			0x7000F800
 #define TEGRA_FUSE_SIZE			SZ_1K
 
-#define TEGRA_KFUSE_BASE		0x7000FC00
-#define TEGRA_KFUSE_SIZE		SZ_1K
+#define TEGRA_EMC0_BASE			0x7001A000
+#define TEGRA_EMC0_SIZE			SZ_2K
 
-#define TEGRA_CSITE_BASE		0x70040000
-#define TEGRA_CSITE_SIZE		SZ_256K
-
-#define TEGRA_SDMMC1_BASE		0xC8000000
-#define TEGRA_SDMMC1_SIZE		SZ_512
-
-#define TEGRA_SDMMC2_BASE		0xC8000200
-#define TEGRA_SDMMC2_SIZE		SZ_512
+#define TEGRA_EMC1_BASE			0x7001A800
+#define TEGRA_EMC1_SIZE			SZ_2K
 
-#define TEGRA_SDMMC3_BASE		0xC8000400
-#define TEGRA_SDMMC3_SIZE		SZ_512
+#define TEGRA124_EMC_BASE		0x7001B000
+#define TEGRA124_EMC_SIZE		SZ_2K
 
-#define TEGRA_SDMMC4_BASE		0xC8000600
-#define TEGRA_SDMMC4_SIZE		SZ_512
+#define TEGRA_CSITE_BASE		0x70040000
+#define TEGRA_CSITE_SIZE		SZ_256K
 
 /* On TEGRA, many peripherals are very closely packed in
  * two 256MB io windows (that actually only use about 64KB
@@ -278,9 +137,6 @@
 #define IO_APB_VIRT	IOMEM(0xFE300000)
 #define IO_APB_SIZE	SZ_1M
 
-#define TEGRA_PCIE_BASE		0x80000000
-#define TEGRA_PCIE_IO_BASE	(TEGRA_PCIE_BASE + SZ_4M)
-
 #define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
 
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
index 501952a84344..e32e1742c9a1 100644
--- a/arch/arm/mach-tegra/irammap.h
+++ b/arch/arm/mach-tegra/irammap.h
@@ -23,4 +23,10 @@
 #define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
 #define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
 
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA	(TEGRA_IRAM_BASE + SZ_4K)
+
 #endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 0de4eed1493d..1a74d562dca1 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,10 +18,12 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cpu_pm.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/syscore_ops.h>
 
@@ -65,6 +67,7 @@ static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS];
 static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS];
 
 static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS];
+static void __iomem *tegra_gic_cpu_base;
 #endif
 
 bool tegra_pending_sgi(void)
@@ -213,8 +216,43 @@ int tegra_legacy_irq_syscore_init(void)
 
 	return 0;
 }
+
+static int tegra_gic_notifier(struct notifier_block *self,
+			      unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block tegra_gic_notifier_block = {
+	.notifier_call = tegra_gic_notifier,
+};
+
+static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
+	{ .compatible = "arm,cortex-a15-gic" },
+	{ }
+};
+
+static void tegra114_gic_cpu_pm_registration(void)
+{
+	struct device_node *dn;
+
+	dn = of_find_matching_node(NULL, tegra114_dt_gic_match);
+	if (!dn)
+		return;
+
+	tegra_gic_cpu_base = of_iomap(dn, 1);
+
+	cpu_pm_register_notifier(&tegra_gic_notifier_block);
+}
 #else
 #define tegra_set_wake NULL
+static void tegra114_gic_cpu_pm_registration(void) { }
 #endif
 
 void __init tegra_init_irq(void)
@@ -252,4 +290,6 @@ void __init tegra_init_irq(void)
 	if (!of_have_populated_dt())
 		gic_init(0, 29, distbase,
 			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+
+	tegra114_gic_cpu_pm_registration();
 }
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
deleted file mode 100644
index 46144a19a7e7..000000000000
--- a/arch/arm/mach-tegra/pcie.c
+++ /dev/null
@@ -1,886 +0,0 @@
-/*
- * arch/arm/mach-tegra/pci.c
- *
- * PCIe host controller driver for TEGRA(2) SOCs
- *
- * Copyright (c) 2010, CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on NVIDIA PCIe driver
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * Bits taken from arch/arm/mach-dove/pcie.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/clk/tegra.h>
-#include <linux/tegra-powergate.h>
-
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-
-#include "board.h"
-#include "iomap.h"
-
-/* Hack - need to parse this from DT */
-#define INT_PCIE_INTR 130
-
-/* register definitions */
-#define AFI_OFFSET	0x3800
-#define PADS_OFFSET	0x3000
-#define RP0_OFFSET	0x0000
-#define RP1_OFFSET	0x1000
-
-#define AFI_AXI_BAR0_SZ	0x00
-#define AFI_AXI_BAR1_SZ	0x04
-#define AFI_AXI_BAR2_SZ	0x08
-#define AFI_AXI_BAR3_SZ	0x0c
-#define AFI_AXI_BAR4_SZ	0x10
-#define AFI_AXI_BAR5_SZ	0x14
-
-#define AFI_AXI_BAR0_START	0x18
-#define AFI_AXI_BAR1_START	0x1c
-#define AFI_AXI_BAR2_START	0x20
-#define AFI_AXI_BAR3_START	0x24
-#define AFI_AXI_BAR4_START	0x28
-#define AFI_AXI_BAR5_START	0x2c
-
-#define AFI_FPCI_BAR0	0x30
-#define AFI_FPCI_BAR1	0x34
-#define AFI_FPCI_BAR2	0x38
-#define AFI_FPCI_BAR3	0x3c
-#define AFI_FPCI_BAR4	0x40
-#define AFI_FPCI_BAR5	0x44
-
-#define AFI_CACHE_BAR0_SZ	0x48
-#define AFI_CACHE_BAR0_ST	0x4c
-#define AFI_CACHE_BAR1_SZ	0x50
-#define AFI_CACHE_BAR1_ST	0x54
-
-#define AFI_MSI_BAR_SZ		0x60
-#define AFI_MSI_FPCI_BAR_ST	0x64
-#define AFI_MSI_AXI_BAR_ST	0x68
-
-#define AFI_CONFIGURATION		0xac
-#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
-
-#define AFI_FPCI_ERROR_MASKS	0xb0
-
-#define AFI_INTR_MASK		0xb4
-#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
-#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
-
-#define AFI_INTR_CODE		0xb8
-#define  AFI_INTR_CODE_MASK	0xf
-#define  AFI_INTR_MASTER_ABORT	4
-#define  AFI_INTR_LEGACY	6
-
-#define AFI_INTR_SIGNATURE	0xbc
-#define AFI_SM_INTR_ENABLE	0xc4
-
-#define AFI_AFI_INTR_ENABLE		0xc8
-#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
-#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
-#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
-#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
-#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
-#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
-#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
-#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
-
-#define AFI_PCIE_CONFIG					0x0f8
-#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
-#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
-
-#define AFI_FUSE			0x104
-#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
-
-#define AFI_PEX0_CTRL			0x110
-#define AFI_PEX1_CTRL			0x118
-#define  AFI_PEX_CTRL_RST		(1 << 0)
-#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
-
-#define RP_VEND_XP	0x00000F00
-#define  RP_VEND_XP_DL_UP	(1 << 30)
-
-#define RP_LINK_CONTROL_STATUS			0x00000090
-#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
-
-#define PADS_CTL_SEL		0x0000009C
-
-#define PADS_CTL		0x000000A0
-#define  PADS_CTL_IDDQ_1L	(1 << 0)
-#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
-#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
-
-#define PADS_PLL_CTL				0x000000B8
-#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
-#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
-#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
-#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
-#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
-
-/* PMC access is required for PCIE xclk (un)clamping */
-#define PMC_SCRATCH42		0x144
-#define PMC_SCRATCH42_PCX_CLAMP	(1 << 0)
-
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-#define pmc_writel(value, reg) \
-	__raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl(reg_pmc_base + (reg))
-
-/*
- * Tegra2 defines 1GB in the AXI address map for PCIe.
- *
- * That address space is split into different regions, with sizes and
- * offsets as follows:
- *
- * 0x80000000 - 0x80003fff - PCI controller registers
- * 0x80004000 - 0x80103fff - PCI configuration space
- * 0x80104000 - 0x80203fff - PCI extended configuration space
- * 0x80203fff - 0x803fffff - unused
- * 0x80400000 - 0x8040ffff - downstream IO
- * 0x80410000 - 0x8fffffff - unused
- * 0x90000000 - 0x9fffffff - non-prefetchable memory
- * 0xa0000000 - 0xbfffffff - prefetchable memory
- */
-#define PCIE_REGS_SZ		SZ_16K
-#define PCIE_CFG_OFF		PCIE_REGS_SZ
-#define PCIE_CFG_SZ		SZ_1M
-#define PCIE_EXT_CFG_OFF	(PCIE_CFG_SZ + PCIE_CFG_OFF)
-#define PCIE_EXT_CFG_SZ		SZ_1M
-#define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-
-#define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
-#define MEM_SIZE_0		SZ_128M
-#define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
-#define MEM_SIZE_1		SZ_128M
-#define PREFETCH_MEM_BASE_0	(MEM_BASE_1 + MEM_SIZE_1)
-#define PREFETCH_MEM_SIZE_0	SZ_128M
-#define PREFETCH_MEM_BASE_1	(PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
-#define PREFETCH_MEM_SIZE_1	SZ_128M
-
-#define  PCIE_CONF_BUS(b)	((b) << 16)
-#define  PCIE_CONF_DEV(d)	((d) << 11)
-#define  PCIE_CONF_FUNC(f)	((f) << 8)
-#define  PCIE_CONF_REG(r)	\
-	(((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
-
-struct tegra_pcie_port {
-	int			index;
-	u8			root_bus_nr;
-	void __iomem		*base;
-
-	bool			link_up;
-
-	char			mem_space_name[16];
-	char			prefetch_space_name[20];
-	struct resource		res[2];
-};
-
-struct tegra_pcie_info {
-	struct tegra_pcie_port	port[2];
-	int			num_ports;
-
-	void __iomem		*regs;
-	struct resource		res_mmio;
-
-	struct clk		*pex_clk;
-	struct clk		*afi_clk;
-	struct clk		*pcie_xclk;
-	struct clk		*pll_e;
-};
-
-static struct tegra_pcie_info tegra_pcie;
-
-static inline void afi_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 afi_readl(unsigned long offset)
-{
-	return readl(offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline void pads_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 pads_readl(unsigned long offset)
-{
-	return readl(offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static struct tegra_pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
-		int rbus = tegra_pcie.port[i].root_bus_nr;
-		if (rbus != -1 && rbus == bus)
-			break;
-	}
-
-	return i >= 0 ? tegra_pcie.port + i : NULL;
-}
-
-static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	if (pp) {
-		if (devfn != 0) {
-			*val = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	*val = readl(addr);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	u32 mask;
-	u32 tmp;
-
-	if (pp) {
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	if (size == 4) {
-		writel(val, addr);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	if (size == 2)
-		mask = ~(0xffff << ((where & 0x3) * 8));
-	else if (size == 1)
-		mask = ~(0xff << ((where & 0x3) * 8));
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	tmp = readl(addr) & mask;
-	tmp |= val << ((where & 0x3) * 8);
-	writel(tmp, addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops tegra_pcie_ops = {
-	.read	= tegra_pcie_read_conf,
-	.write	= tegra_pcie_write_conf,
-};
-
-static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
-{
-	u16 reg;
-
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
-		pci_read_config_word(dev, PCI_COMMAND, &reg);
-		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
-		pci_write_config_word(dev, PCI_COMMAND, reg);
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
-
-/* Tegra PCIE root complex wrongly reports device class */
-static void tegra_pcie_fixup_class(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
-
-/* Tegra PCIE requires relaxed ordering */
-static void tegra_pcie_relax_enable(struct pci_dev *dev)
-{
-	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
-
-static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return 0;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-		 "PCIe %d MEM", pp->index);
-	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[0].name = pp->mem_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = MEM_BASE_0;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
-	} else {
-		pp->res[0].start = MEM_BASE_1;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
-	}
-	pp->res[0].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[0]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
-
-	/*
-	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
-	 */
-	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
-		 "PCIe %d PREFETCH MEM", pp->index);
-	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
-	pp->res[1].name = pp->prefetch_space_name;
-	if (pp->index == 0) {
-		pp->res[1].start = PREFETCH_MEM_BASE_0;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
-	} else {
-		pp->res[1].start = PREFETCH_MEM_BASE_1;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
-	}
-	pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe Prefetch Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	return 1;
-}
-
-static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return INT_PCIE_INTR;
-}
-
-static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
-						  struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return NULL;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
-				 &sys->resources);
-}
-
-static struct hw_pci tegra_pcie_hw __initdata = {
-	.nr_controllers	= 2,
-	.setup		= tegra_pcie_setup,
-	.scan		= tegra_pcie_scan_bus,
-	.map_irq	= tegra_pcie_map_irq,
-};
-
-
-static irqreturn_t tegra_pcie_isr(int irq, void *arg)
-{
-	const char *err_msg[] = {
-		"Unknown",
-		"AXI slave error",
-		"AXI decode error",
-		"Target abort",
-		"Master abort",
-		"Invalid write",
-		"Response decoding error",
-		"AXI response decoding error",
-		"Transcation timeout",
-	};
-
-	u32 code, signature;
-
-	code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
-	signature = afi_readl(AFI_INTR_SIGNATURE);
-	afi_writel(0, AFI_INTR_CODE);
-
-	if (code == AFI_INTR_LEGACY)
-		return IRQ_NONE;
-
-	if (code >= ARRAY_SIZE(err_msg))
-		code = 0;
-
-	/*
-	 * do not pollute kernel log with master abort reports since they
-	 * happen a lot during enumeration
-	 */
-	if (code == AFI_INTR_MASTER_ABORT)
-		pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-	else
-		pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-
-	return IRQ_HANDLED;
-}
-
-static void tegra_pcie_setup_translations(void)
-{
-	u32 fpci_bar;
-	u32 size;
-	u32 axi_address;
-
-	/* Bar 0: config Bar */
-	fpci_bar = ((u32)0xfdff << 16);
-	size = PCIE_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR0_START);
-	afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR0);
-
-	/* Bar 1: extended config Bar */
-	fpci_bar = ((u32)0xfe1 << 20);
-	size = PCIE_EXT_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR1_START);
-	afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR1);
-
-	/* Bar 2: downstream IO bar */
-	fpci_bar = ((__u32)0xfdfc << 16);
-	size = SZ_128K;
-	axi_address = TEGRA_PCIE_IO_BASE;
-	afi_writel(axi_address, AFI_AXI_BAR2_START);
-	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR2);
-
-	/* Bar 3: prefetchable memory BAR */
-	fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
-	size =  PREFETCH_MEM_SIZE_0 +  PREFETCH_MEM_SIZE_1;
-	axi_address = PREFETCH_MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR3_START);
-	afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR3);
-
-	/* Bar 4: non prefetchable memory BAR */
-	fpci_bar = (((MEM_BASE_0 >> 12)	& 0x0FFFFFFF) << 4) | 0x1;
-	size = MEM_SIZE_0 + MEM_SIZE_1;
-	axi_address = MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR4_START);
-	afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR4);
-
-	/* Bar 5: NULL out the remaining BAR as it is not used */
-	fpci_bar = 0;
-	size = 0;
-	axi_address = 0;
-	afi_writel(axi_address, AFI_AXI_BAR5_START);
-	afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR5);
-
-	/* map all upstream transactions as uncached */
-	afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
-	afi_writel(0, AFI_CACHE_BAR0_SZ);
-	afi_writel(0, AFI_CACHE_BAR1_ST);
-	afi_writel(0, AFI_CACHE_BAR1_SZ);
-
-	/* No MSI */
-	afi_writel(0, AFI_MSI_FPCI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-	afi_writel(0, AFI_MSI_AXI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-}
-
-static int tegra_pcie_enable_controller(void)
-{
-	u32 val, reg;
-	int i, timeout;
-
-	/* Enable slot clock and pulse the reset signals */
-	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
-		val = afi_readl(reg) |  AFI_PEX_CTRL_REFCLK_EN;
-		afi_writel(val, reg);
-		val &= ~AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-
-		val = afi_readl(reg) | AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-	}
-
-	/* Enable dual controller and both ports */
-	val = afi_readl(AFI_PCIE_CONFIG);
-	val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
-	val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
-	afi_writel(val, AFI_PCIE_CONFIG);
-
-	val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
-	afi_writel(val, AFI_FUSE);
-
-	/* Initialze internal PHY, enable up to 16 PCIE lanes */
-	pads_writel(0x0, PADS_CTL_SEL);
-
-	/* override IDDQ to 1 on all 4 lanes */
-	val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/*
-	 * set up PHY PLL inputs select PLLE output as refclock,
-	 * set TX ref sel to div10 (not div5)
-	 */
-	val = pads_readl(PADS_PLL_CTL);
-	val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
-	val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
-	pads_writel(val, PADS_PLL_CTL);
-
-	/* take PLL out of reset  */
-	val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
-	pads_writel(val, PADS_PLL_CTL);
-
-	/*
-	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
-	 * This doesn't exist in the documentation
-	 */
-	pads_writel(0xfa5cfa5c, 0xc8);
-
-	/* Wait for the PLL to lock */
-	timeout = 300;
-	do {
-		val = pads_readl(PADS_PLL_CTL);
-		usleep_range(1000, 1000);
-		if (--timeout == 0) {
-			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
-			return -EBUSY;
-		}
-	} while (!(val & PADS_PLL_CTL_LOCKDET));
-
-	/* turn off IDDQ override */
-	val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/* enable TX/RX data */
-	val = pads_readl(PADS_CTL);
-	val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
-	pads_writel(val, PADS_CTL);
-
-	/* Take the PCIe interface module out of reset */
-	tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
-
-	/* Finally enable PCIe */
-	val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
-	afi_writel(val, AFI_CONFIGURATION);
-
-	val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
-	       AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
-	       AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
-	afi_writel(val, AFI_AFI_INTR_ENABLE);
-	afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
-
-	/* FIXME: No MSI for now, only INT */
-	afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
-
-	/* Disable all execptions */
-	afi_writel(0, AFI_FPCI_ERROR_MASKS);
-
-	return 0;
-}
-
-static void tegra_pcie_xclk_clamp(bool clamp)
-{
-	u32 reg;
-
-	reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP;
-
-	if (clamp)
-		reg |= PMC_SCRATCH42_PCX_CLAMP;
-
-	pmc_writel(reg, PMC_SCRATCH42);
-}
-
-static void tegra_pcie_power_off(void)
-{
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-	tegra_periph_reset_assert(tegra_pcie.pex_clk);
-
-	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
-	tegra_pcie_xclk_clamp(true);
-}
-
-static int tegra_pcie_power_regate(void)
-{
-	int err;
-
-	tegra_pcie_power_off();
-
-	tegra_pcie_xclk_clamp(true);
-
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-
-	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
-						tegra_pcie.pex_clk);
-	if (err) {
-		pr_err("PCIE: powerup sequence failed: %d\n", err);
-		return err;
-	}
-
-	tegra_periph_reset_deassert(tegra_pcie.afi_clk);
-
-	tegra_pcie_xclk_clamp(false);
-
-	clk_prepare_enable(tegra_pcie.afi_clk);
-	clk_prepare_enable(tegra_pcie.pex_clk);
-	return clk_prepare_enable(tegra_pcie.pll_e);
-}
-
-static int tegra_pcie_clocks_get(void)
-{
-	int err;
-
-	tegra_pcie.pex_clk = clk_get(NULL, "pex");
-	if (IS_ERR(tegra_pcie.pex_clk))
-		return PTR_ERR(tegra_pcie.pex_clk);
-
-	tegra_pcie.afi_clk = clk_get(NULL, "afi");
-	if (IS_ERR(tegra_pcie.afi_clk)) {
-		err = PTR_ERR(tegra_pcie.afi_clk);
-		goto err_afi_clk;
-	}
-
-	tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
-	if (IS_ERR(tegra_pcie.pcie_xclk)) {
-		err =  PTR_ERR(tegra_pcie.pcie_xclk);
-		goto err_pcie_xclk;
-	}
-
-	tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
-	if (IS_ERR(tegra_pcie.pll_e)) {
-		err = PTR_ERR(tegra_pcie.pll_e);
-		goto err_pll_e;
-	}
-
-	return 0;
-
-err_pll_e:
-	clk_put(tegra_pcie.pcie_xclk);
-err_pcie_xclk:
-	clk_put(tegra_pcie.afi_clk);
-err_afi_clk:
-	clk_put(tegra_pcie.pex_clk);
-
-	return err;
-}
-
-static void tegra_pcie_clocks_put(void)
-{
-	clk_put(tegra_pcie.pll_e);
-	clk_put(tegra_pcie.pcie_xclk);
-	clk_put(tegra_pcie.afi_clk);
-	clk_put(tegra_pcie.pex_clk);
-}
-
-static int __init tegra_pcie_get_resources(void)
-{
-	int err;
-
-	err = tegra_pcie_clocks_get();
-	if (err) {
-		pr_err("PCIE: failed to get clocks: %d\n", err);
-		return err;
-	}
-
-	err = tegra_pcie_power_regate();
-	if (err) {
-		pr_err("PCIE: failed to power up: %d\n", err);
-		goto err_pwr_on;
-	}
-
-	tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
-	if (tegra_pcie.regs == NULL) {
-		pr_err("PCIE: Failed to map PCI/AFI registers\n");
-		err = -ENOMEM;
-		goto err_map_reg;
-	}
-
-	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
-			  IRQF_SHARED, "PCIE", &tegra_pcie);
-	if (err) {
-		pr_err("PCIE: Failed to register IRQ: %d\n", err);
-		goto err_req_io;
-	}
-	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
-
-	return 0;
-
-err_req_io:
-	iounmap(tegra_pcie.regs);
-err_map_reg:
-	tegra_pcie_power_off();
-err_pwr_on:
-	tegra_pcie_clocks_put();
-
-	return err;
-}
-
-/*
- * FIXME: If there are no PCIe cards attached, then calling this function
- * can result in the increase of the bootup time as there are big timeout
- * loops.
- */
-#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
-static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
-				  u32 reset_reg)
-{
-	u32 reg;
-	int retries = 3;
-	int timeout;
-
-	do {
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_VEND_XP);
-
-			if (reg & RP_VEND_XP_DL_UP)
-				break;
-
-			mdelay(1);
-			timeout--;
-		}
-
-		if (!timeout)  {
-			pr_err("PCIE: port %d: link down, retrying\n", idx);
-			goto retry;
-		}
-
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
-
-			if (reg & 0x20000000)
-				return true;
-
-			mdelay(1);
-			timeout--;
-		}
-
-retry:
-		/* Pulse the PEX reset */
-		reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-		mdelay(1);
-		reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-
-		retries--;
-	} while (retries);
-
-	return false;
-}
-
-static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
-{
-	struct tegra_pcie_port *pp;
-
-	pp = tegra_pcie.port + tegra_pcie.num_ports;
-
-	pp->index = -1;
-	pp->base = tegra_pcie.regs + offset;
-	pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
-
-	if (!pp->link_up) {
-		pp->base = NULL;
-		printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
-		return;
-	}
-
-	tegra_pcie.num_ports++;
-	pp->index = index;
-	pp->root_bus_nr = -1;
-	memset(pp->res, 0, sizeof(pp->res));
-}
-
-int __init tegra_pcie_init(bool init_port0, bool init_port1)
-{
-	int err;
-
-	if (!(init_port0 || init_port1))
-		return -ENODEV;
-
-	pcibios_min_mem = 0;
-
-	err = tegra_pcie_get_resources();
-	if (err)
-		return err;
-
-	err = tegra_pcie_enable_controller();
-	if (err)
-		return err;
-
-	/* setup the AFI address translations */
-	tegra_pcie_setup_translations();
-
-	if (init_port0)
-		tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
-
-	if (init_port1)
-		tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
-
-	pci_common_init(&tegra_pcie_hw);
-
-	return 0;
-}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 97b33a2a2d75..eb72ae709124 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -176,6 +176,8 @@ static int tegra_boot_secondary(unsigned int cpu,
 		return tegra30_boot_secondary(cpu, idle);
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		return tegra114_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		return tegra114_boot_secondary(cpu, idle);
 
 	return -EINVAL;
 }
@@ -196,6 +198,5 @@ struct smp_operations tegra_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= tegra_cpu_kill,
 	.cpu_die		= tegra_cpu_die,
-	.cpu_disable		= tegra_cpu_disable,
 #endif
 };
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-tegra/pm-tegra20.c
index a019e4e86e51..d65e1d786400 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-tegra/pm-tegra20.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Calxeda, Inc.
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -10,28 +10,25 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
-#include <asm/cacheflush.h>
 
-#include "core.h"
-#include "sysregs.h"
+#include "pm.h"
 
-extern void secondary_startup(void);
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra20_iram_start, tegra20_iram_end;
+extern void tegra20_sleep_core_finish(unsigned long);
 
-/*
- * platform-specific code to shutdown a CPU
- *
- */
-void __ref highbank_cpu_die(unsigned int cpu)
+void tegra20_lp1_iram_hook(void)
 {
-	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-
-	flush_cache_louis();
-	highbank_set_core_pwr();
+	tegra_lp1_iram.start_addr = &tegra20_iram_start;
+	tegra_lp1_iram.end_addr = &tegra20_iram_end;
+}
 
-	while (1)
-		cpu_do_idle();
+void tegra20_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra20_sleep_core_finish;
 }
+#endif
diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c
new file mode 100644
index 000000000000..8fa326d6ff1a
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra30.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra30_iram_start, tegra30_iram_end;
+extern void tegra30_sleep_core_finish(unsigned long);
+
+void tegra30_lp1_iram_hook(void)
+{
+	tegra_lp1_iram.start_addr = &tegra30_iram_start;
+	tegra_lp1_iram.end_addr = &tegra30_iram_end;
+}
+
+void tegra30_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra30_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 261fec140c06..4ae0286b468d 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -37,12 +37,18 @@
 #include "reset.h"
 #include "flowctrl.h"
 #include "fuse.h"
+#include "pm.h"
 #include "pmc.h"
 #include "sleep.h"
 
 #ifdef CONFIG_PM_SLEEP
 static DEFINE_SPINLOCK(tegra_lp2_lock);
+static u32 iram_save_size;
+static void *iram_save_addr;
+struct tegra_lp1_iram tegra_lp1_iram;
 void (*tegra_tear_down_cpu)(void);
+void (*tegra_sleep_core_finish)(unsigned long v2p);
+static int (*tegra_sleep_func)(unsigned long v2p);
 
 static void tegra_tear_down_cpu_init(void)
 {
@@ -52,7 +58,11 @@ static void tegra_tear_down_cpu_init(void)
 			tegra_tear_down_cpu = tegra20_tear_down_cpu;
 		break;
 	case TEGRA30:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra_tear_down_cpu = tegra30_tear_down_cpu;
 		break;
 	}
@@ -171,19 +181,113 @@ void tegra_idle_lp2_last(void)
 enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
 				enum tegra_suspend_mode mode)
 {
-	/* Tegra114 didn't support any suspending mode yet. */
-	if (tegra_chip_id == TEGRA114)
-		return TEGRA_SUSPEND_NONE;
-
 	/*
-	 * The Tegra devices only support suspending to LP2 currently.
+	 * The Tegra devices support suspending to LP1 or lower currently.
 	 */
-	if (mode > TEGRA_SUSPEND_LP2)
-		return TEGRA_SUSPEND_LP2;
+	if (mode > TEGRA_SUSPEND_LP1)
+		return TEGRA_SUSPEND_LP1;
 
 	return mode;
 }
 
+static int tegra_sleep_core(unsigned long v2p)
+{
+	setup_mm_for_reboot();
+	tegra_sleep_core_finish(v2p);
+
+	/* should never here */
+	BUG();
+
+	return 0;
+}
+
+/*
+ * tegra_lp1_iram_hook
+ *
+ * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
+ * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * copy these code to IRAM before LP0/LP1 suspend and restore the content
+ * of IRAM after resume.
+ */
+static bool tegra_lp1_iram_hook(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_lp1_iram_hook();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_lp1_iram_hook();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
+		return false;
+
+	iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
+	iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
+	if (!iram_save_addr)
+		return false;
+
+	return true;
+}
+
+static bool tegra_sleep_core_init(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_sleep_core_init();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_sleep_core_init();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_sleep_core_finish)
+		return false;
+
+	return true;
+}
+
+static void tegra_suspend_enter_lp1(void)
+{
+	tegra_pmc_suspend();
+
+	/* copy the reset vector & SDRAM shutdown code into IRAM */
+	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		iram_save_size);
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		tegra_lp1_iram.start_addr, iram_save_size);
+
+	*((u32 *)tegra_cpu_lp1_mask) = 1;
+}
+
+static void tegra_suspend_exit_lp1(void)
+{
+	tegra_pmc_resume();
+
+	/* restore IRAM */
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
+		iram_save_size);
+
+	*(u32 *)tegra_cpu_lp1_mask = 0;
+}
+
 static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
 	[TEGRA_SUSPEND_NONE] = "none",
 	[TEGRA_SUSPEND_LP2] = "LP2",
@@ -207,6 +311,9 @@ static int tegra_suspend_enter(suspend_state_t state)
 
 	suspend_cpu_complex();
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_enter_lp1();
+		break;
 	case TEGRA_SUSPEND_LP2:
 		tegra_set_cpu_in_lp2();
 		break;
@@ -214,9 +321,12 @@ static int tegra_suspend_enter(suspend_state_t state)
 		break;
 	}
 
-	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
 
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_exit_lp1();
+		break;
 	case TEGRA_SUSPEND_LP2:
 		tegra_clear_cpu_in_lp2();
 		break;
@@ -237,12 +347,36 @@ static const struct platform_suspend_ops tegra_suspend_ops = {
 
 void __init tegra_init_suspend(void)
 {
-	if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+	enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+	if (mode == TEGRA_SUSPEND_NONE)
 		return;
 
 	tegra_tear_down_cpu_init();
 	tegra_pmc_suspend_init();
 
+	if (mode >= TEGRA_SUSPEND_LP1) {
+		if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
+			pr_err("%s: unable to allocate memory for SDRAM"
+			       "self-refresh -- LP0/LP1 unavailable\n",
+			       __func__);
+			tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
+			mode = TEGRA_SUSPEND_LP2;
+		}
+	}
+
+	/* set up sleep function for cpu_suspend */
+	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_sleep_func = tegra_sleep_core;
+		break;
+	case TEGRA_SUSPEND_LP2:
+		tegra_sleep_func = tegra_sleep_cpu;
+		break;
+	default:
+		break;
+	}
+
 	suspend_set_ops(&tegra_suspend_ops);
 }
 #endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 94c4b9d9077c..6e92a7c2ecbd 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,10 +23,19 @@
 
 #include "pmc.h"
 
-extern unsigned long l2x0_saved_regs_addr;
+struct tegra_lp1_iram {
+	void	*start_addr;
+	void	*end_addr;
+};
+extern struct tegra_lp1_iram tegra_lp1_iram;
+extern void (*tegra_sleep_core_finish)(unsigned long v2p);
+
+void tegra20_lp1_iram_hook(void);
+void tegra20_sleep_core_init(void);
+void tegra30_lp1_iram_hook(void);
+void tegra30_sleep_core_init(void);
 
-void save_cpu_arch_register(void);
-void restore_cpu_arch_register(void);
+extern unsigned long l2x0_saved_regs_addr;
 
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index eb3fa4aee0e4..fb7920201ab4 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -20,12 +20,16 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/tegra-powergate.h>
 
+#include "flowctrl.h"
 #include "fuse.h"
 #include "pm.h"
 #include "pmc.h"
 #include "sleep.h"
 
+#define TEGRA_POWER_SYSCLK_POLARITY	(1 << 10)  /* sys clk polarity */
+#define TEGRA_POWER_SYSCLK_OE		(1 << 11)  /* system clock enable */
 #define TEGRA_POWER_EFFECT_LP0		(1 << 14)  /* LP0 when CPU pwr gated */
 #define TEGRA_POWER_CPU_PWRREQ_POLARITY	(1 << 15)  /* CPU pwr req polarity */
 #define TEGRA_POWER_CPU_PWRREQ_OE	(1 << 16)  /* CPU pwr req enable */
@@ -40,12 +44,6 @@
 #define PMC_CPUPWRGOOD_TIMER	0xc8
 #define PMC_CPUPWROFF_TIMER	0xcc
 
-#define TEGRA_POWERGATE_PCIE	3
-#define TEGRA_POWERGATE_VDEC	4
-#define TEGRA_POWERGATE_CPU1	9
-#define TEGRA_POWERGATE_CPU2	10
-#define TEGRA_POWERGATE_CPU3	11
-
 static u8 tegra_cpu_domains[] = {
 	0xFF,			/* not available for CPU0 */
 	TEGRA_POWERGATE_CPU1,
@@ -163,6 +161,15 @@ int tegra_pmc_cpu_remove_clamping(int cpuid)
 	return tegra_pmc_powergate_remove_clamping(id);
 }
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 val;
+
+	val = tegra_pmc_readl(0);
+	val |= 0x10;
+	tegra_pmc_writel(val, 0);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
 {
@@ -193,16 +200,50 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
 	return pmc_pm_data.suspend_mode;
 }
 
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
+{
+	if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE)
+		return;
+
+	pmc_pm_data.suspend_mode = mode;
+}
+
+void tegra_pmc_suspend(void)
+{
+	tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41);
+}
+
+void tegra_pmc_resume(void)
+{
+	tegra_pmc_writel(0x0, PMC_SCRATCH41);
+}
+
 void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
 {
-	u32 reg;
+	u32 reg, csr_reg;
 	unsigned long rate = 0;
 
 	reg = tegra_pmc_readl(PMC_CTRL);
 	reg |= TEGRA_POWER_CPU_PWRREQ_OE;
 	reg &= ~TEGRA_POWER_EFFECT_LP0;
 
+	switch (tegra_chip_id) {
+	case TEGRA20:
+	case TEGRA30:
+		break;
+	default:
+		/* Turn off CRAIL */
+		csr_reg = flowctrl_read_cpu_csr(0);
+		csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK;
+		csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL;
+		flowctrl_write_cpu_csr(0, csr_reg);
+		break;
+	}
+
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		rate = 32768;
+		break;
 	case TEGRA_SUSPEND_LP2:
 		rate = clk_get_rate(tegra_pclk);
 		break;
@@ -224,23 +265,35 @@ void tegra_pmc_suspend_init(void)
 	reg = tegra_pmc_readl(PMC_CTRL);
 	reg |= TEGRA_POWER_CPU_PWRREQ_OE;
 	tegra_pmc_writel(reg, PMC_CTRL);
+
+	reg = tegra_pmc_readl(PMC_CTRL);
+
+	if (!pmc_pm_data.sysclkreq_high)
+		reg |= TEGRA_POWER_SYSCLK_POLARITY;
+	else
+		reg &= ~TEGRA_POWER_SYSCLK_POLARITY;
+
+	/* configure the output polarity while the request is tristated */
+	tegra_pmc_writel(reg, PMC_CTRL);
+
+	/* now enable the request */
+	reg |= TEGRA_POWER_SYSCLK_OE;
+	tegra_pmc_writel(reg, PMC_CTRL);
 }
 #endif
 
 static const struct of_device_id matches[] __initconst = {
+	{ .compatible = "nvidia,tegra124-pmc" },
 	{ .compatible = "nvidia,tegra114-pmc" },
 	{ .compatible = "nvidia,tegra30-pmc" },
 	{ .compatible = "nvidia,tegra20-pmc" },
 	{ }
 };
 
-static void __init tegra_pmc_parse_dt(void)
+void __init tegra_pmc_init_irq(void)
 {
 	struct device_node *np;
-	u32 prop;
-	enum tegra_suspend_mode suspend_mode;
-	u32 core_good_time[2] = {0, 0};
-	u32 lp0_vec[2] = {0, 0};
+	u32 val;
 
 	np = of_find_matching_node(NULL, matches);
 	BUG_ON(!np);
@@ -249,6 +302,26 @@ static void __init tegra_pmc_parse_dt(void)
 
 	tegra_pmc_invert_interrupt = of_property_read_bool(np,
 				     "nvidia,invert-interrupt");
+
+	val = tegra_pmc_readl(PMC_CTRL);
+	if (tegra_pmc_invert_interrupt)
+		val |= PMC_CTRL_INTR_LOW;
+	else
+		val &= ~PMC_CTRL_INTR_LOW;
+	tegra_pmc_writel(val, PMC_CTRL);
+}
+
+void __init tegra_pmc_init(void)
+{
+	struct device_node *np;
+	u32 prop;
+	enum tegra_suspend_mode suspend_mode;
+	u32 core_good_time[2] = {0, 0};
+	u32 lp0_vec[2] = {0, 0};
+
+	np = of_find_matching_node(NULL, matches);
+	BUG_ON(!np);
+
 	tegra_pclk = of_clk_get_by_name(np, "pclk");
 	WARN_ON(IS_ERR(tegra_pclk));
 
@@ -314,17 +387,3 @@ static void __init tegra_pmc_parse_dt(void)
 
 	pmc_pm_data.suspend_mode = suspend_mode;
 }
-
-void __init tegra_pmc_init(void)
-{
-	u32 val;
-
-	tegra_pmc_parse_dt();
-
-	val = tegra_pmc_readl(PMC_CTRL);
-	if (tegra_pmc_invert_interrupt)
-		val |= PMC_CTRL_INTR_LOW;
-	else
-		val &= ~PMC_CTRL_INTR_LOW;
-	tegra_pmc_writel(val, PMC_CTRL);
-}
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
index e1c2df272f7d..59e19c344298 100644
--- a/arch/arm/mach-tegra/pmc.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -18,6 +18,8 @@
 #ifndef __MACH_TEGRA_PMC_H
 #define __MACH_TEGRA_PMC_H
 
+#include <linux/reboot.h>
+
 enum tegra_suspend_mode {
 	TEGRA_SUSPEND_NONE = 0,
 	TEGRA_SUSPEND_LP2,	/* CPU voltage off */
@@ -28,6 +30,9 @@ enum tegra_suspend_mode {
 
 #ifdef CONFIG_PM_SLEEP
 enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
+void tegra_pmc_suspend(void);
+void tegra_pmc_resume(void);
 void tegra_pmc_pm_set(enum tegra_suspend_mode mode);
 void tegra_pmc_suspend_init(void);
 #endif
@@ -36,6 +41,9 @@ bool tegra_pmc_cpu_is_powered(int cpuid);
 int tegra_pmc_cpu_power_on(int cpuid);
 int tegra_pmc_cpu_remove_clamping(int cpuid);
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd);
+
+void tegra_pmc_init_irq(void);
 void tegra_pmc_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index f076f0f80fcd..85d28e756bb7 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -42,8 +42,16 @@
 
 static int tegra_num_powerdomains;
 static int tegra_num_cpu_domains;
-static u8 *tegra_cpu_domains;
-static u8 tegra30_cpu_domains[] = {
+static const u8 *tegra_cpu_domains;
+
+static const u8 tegra30_cpu_domains[] = {
+	TEGRA_POWERGATE_CPU,
+	TEGRA_POWERGATE_CPU1,
+	TEGRA_POWERGATE_CPU2,
+	TEGRA_POWERGATE_CPU3,
+};
+
+static const u8 tegra114_cpu_domains[] = {
 	TEGRA_POWERGATE_CPU0,
 	TEGRA_POWERGATE_CPU1,
 	TEGRA_POWERGATE_CPU2,
@@ -189,6 +197,11 @@ int __init tegra_powergate_init(void)
 		tegra_num_cpu_domains = 4;
 		tegra_cpu_domains = tegra30_cpu_domains;
 		break;
+	case TEGRA114:
+		tegra_num_powerdomains = 23;
+		tegra_num_cpu_domains = 4;
+		tegra_cpu_domains = tegra114_cpu_domains;
+		break;
 	default:
 		/* Unknown Tegra variant. Disable powergating */
 		tegra_num_powerdomains = 0;
@@ -229,6 +242,27 @@ static const char * const powergate_name_t30[] = {
 	[TEGRA_POWERGATE_3D1]	= "3d1",
 };
 
+static const char * const powergate_name_t114[] = {
+	[TEGRA_POWERGATE_CPU]	= "cpu0",
+	[TEGRA_POWERGATE_3D]	= "3d",
+	[TEGRA_POWERGATE_VENC]	= "venc",
+	[TEGRA_POWERGATE_VDEC]	= "vdec",
+	[TEGRA_POWERGATE_MPE]	= "mpe",
+	[TEGRA_POWERGATE_HEG]	= "heg",
+	[TEGRA_POWERGATE_CPU1]	= "cpu1",
+	[TEGRA_POWERGATE_CPU2]	= "cpu2",
+	[TEGRA_POWERGATE_CPU3]	= "cpu3",
+	[TEGRA_POWERGATE_CELP]	= "celp",
+	[TEGRA_POWERGATE_CPU0]	= "cpu0",
+	[TEGRA_POWERGATE_C0NC]	= "c0nc",
+	[TEGRA_POWERGATE_C1NC]	= "c1nc",
+	[TEGRA_POWERGATE_DIS]	= "dis",
+	[TEGRA_POWERGATE_DISB]	= "disb",
+	[TEGRA_POWERGATE_XUSBA]	= "xusba",
+	[TEGRA_POWERGATE_XUSBB]	= "xusbb",
+	[TEGRA_POWERGATE_XUSBC]	= "xusbc",
+};
+
 static int powergate_show(struct seq_file *s, void *data)
 {
 	int i;
@@ -236,9 +270,14 @@ static int powergate_show(struct seq_file *s, void *data)
 	seq_printf(s, " powergate powered\n");
 	seq_printf(s, "------------------\n");
 
-	for (i = 0; i < tegra_num_powerdomains; i++)
+	for (i = 0; i < tegra_num_powerdomains; i++) {
+		if (!powergate_name[i])
+			continue;
+
 		seq_printf(s, " %9s %7s\n", powergate_name[i],
 			tegra_powergate_is_powered(i) ? "yes" : "no");
+	}
+
 	return 0;
 }
 
@@ -265,6 +304,9 @@ int __init tegra_powergate_debugfs_init(void)
 	case TEGRA30:
 		powergate_name = powergate_name_t30;
 		break;
+	case TEGRA114:
+		powergate_name = powergate_name_t114;
+		break;
 	}
 
 	if (powergate_name) {
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 39dc9e7834f3..8c1ba4fea384 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -40,19 +40,16 @@
  *	  re-enabling sdram.
  *
  *	r6: SoC ID
+ *	r8: CPU part number
  */
 ENTRY(tegra_resume)
-	bl	v7_invalidate_l1
+	check_cpu_part_num 0xc09, r8, r9
+	bleq	v7_invalidate_l1
 
 	cpu_id	r0
-	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
-	cmp	r6, #TEGRA114
-	beq	no_cpu0_chk
-
 	cmp	r0, #0				@ CPU0?
  THUMB(	it	ne )
 	bne	cpu_resume			@ no
-no_cpu0_chk:
 
 	/* Are we on Tegra20? */
 	cmp	r6, #TEGRA20
@@ -70,8 +67,9 @@ no_cpu0_chk:
 	str	r1, [r2]
 1:
 
-	check_cpu_part_num 0xc09, r8, r9
-	bne	not_ca9
+	mov32	r9, 0xc09
+	cmp	r8, r9
+	bne	end_ca9_scu_l2_resume
 #ifdef CONFIG_HAVE_ARM_SCU
 	/* enable SCU */
 	mov32	r0, TEGRA_ARM_PERIF_BASE
@@ -82,7 +80,10 @@ no_cpu0_chk:
 
 	/* L2 cache resume & re-enable */
 	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-not_ca9:
+end_ca9_scu_l2_resume:
+	mov32	r9, 0xc0f
+	cmp	r8, r9
+	bleq	tegra_init_l2_for_a15
 
 	b	cpu_resume
 ENDPROC(tegra_resume)
@@ -178,6 +179,19 @@ after_errata:
 1:
 #endif
 
+	/* Waking up from LP1? */
+	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
+	tst	r8, r11				@ if in_lp1
+	beq	__is_not_lp1
+	cmp	r10, #0
+	bne	__die				@ only CPU0 can be here
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP1)]
+	cmp	lr, #0
+	bleq	__die				@ no LP1 startup handler
+ THUMB(	add	lr, lr, #1 )			@ switch to Thumb mode
+	bx	lr
+__is_not_lp1:
+
 	/* Waking up from LP2? */
 	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
 	tst	r9, r11				@ if in_lp2
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 1ac434e0068f..568f5bbf979d 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -81,6 +81,8 @@ void __init tegra_cpu_reset_handler_init(void)
 #endif
 
 #ifdef CONFIG_PM_SLEEP
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
+		TEGRA_IRAM_LPx_RESUME_AREA;
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
 		virt_to_phys((void *)tegra_resume);
 #endif
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index c90d8e9c4ad2..76a93434c6ee 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -39,6 +39,10 @@ void __tegra_cpu_reset_handler_end(void);
 void tegra_secondary_startup(void);
 
 #ifdef CONFIG_PM_SLEEP
+#define tegra_cpu_lp1_mask \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \
+	 (u32)__tegra_cpu_reset_handler_start)))
 #define tegra_cpu_lp2_mask \
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index e3f2417c420e..aaaf3abd2688 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -23,10 +23,50 @@
 #include <asm/assembler.h>
 #include <asm/proc-fns.h>
 #include <asm/cp15.h>
+#include <asm/cache.h>
 
+#include "irammap.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_REFRESH			0x70
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_EMC_STATUS			0x2b4
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLP_BASE		0xa0
+
+#define APB_MISC_XM2CFGCPADCTRL		0x8c8
+#define APB_MISC_XM2CFGDPADCTRL		0x8cc
+#define APB_MISC_XM2CLKCFGPADCTRL	0x8d0
+#define APB_MISC_XM2COMPPADCTRL		0x8d4
+#define APB_MISC_XM2VTTGENPADCTRL	0x8d8
+#define APB_MISC_XM2CFGCPADCTRL2	0x8e4
+#define APB_MISC_XM2CFGDPADCTRL2	0x8e8
+
+.macro pll_enable, rd, r_car_base, pll_base
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+.endm
+
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #(0x3 << 24)
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra20_hotplug_shutdown(void)
@@ -181,6 +221,28 @@ ENTRY(tegra20_cpu_is_resettable_soon)
 ENDPROC(tegra20_cpu_is_resettable_soon)
 
 /*
+ * tegra20_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
+ * tegra20_tear_down_core in IRAM
+ */
+ENTRY(tegra20_sleep_core_finish)
+	/* Flush, disable the L1 data cache and exit SMP */
+	bl	tegra_disable_clean_inv_dcache
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra20_tear_down_core
+	mov32	r1, tegra20_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	mov	pc, r3
+ENDPROC(tegra20_sleep_core_finish)
+
+/*
  * tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
  *
  * Enters WFI on secondary CPU by exiting coherency.
@@ -191,6 +253,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
 	mrc	p15, 0, r11, c1, c0, 1  @ save actlr before exiting coherency
 
 	/* Flush and disable the L1 data cache */
+	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
 	mov32	r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
@@ -250,6 +313,150 @@ ENTRY(tegra20_tear_down_cpu)
 	b	tegra20_enter_sleep
 ENDPROC(tegra20_tear_down_cpu)
 
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_start
+tegra20_iram_start:
+
+/*
+ * tegra20_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing and PLLX.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra20_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLM, PLLP, PLLC.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padload:
+	ldr	r7, [r2, r5]		@ r7 is the addr in the pad_address
+
+	ldr	r1, [r4, r5]
+	str	r1, [r7]		@ restore the value in pad_save
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padload
+
+padload_done:
+	/* 255uS delay for PLL stabilization */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #0xff
+	wait_until r1, r7, r9
+
+	adr	r4, tegra20_sclk_save
+	ldr	r4, [r4]
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+	mov32	r4, ((1 << 28) | (4))	@ burst policy is PLLP
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	mov32	r0, TEGRA_EMC_BASE
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	str	r1, [r0, #EMC_NOP]
+	str	r1, [r0, #EMC_NOP]
+	str	r1, [r0, #EMC_REFRESH]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	mov	pc, r0			@ jump to tegra_resume
+ENDPROC(tegra20_lp1_reset)
+
+/*
+ * tegra20_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra20_tear_down_core:
+	bl	tegra20_sdram_self_refresh
+	bl	tegra20_switch_cpu_to_clk32k
+	b	tegra20_enter_sleep
+
+/*
+ * tegra20_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock
+ * to the 32KHz clock.
+ */
+tegra20_switch_cpu_to_clk32k:
+	/*
+	 * start by switching to CLKM to safely disable PLLs, then switch to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* disable PLLM, PLLP and PLLC */
+	ldr	r0, [r5, #CLK_RESET_PLLM_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLM_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+
+	/* switch to CLKS */
+	mov	r0, #0	/* brust policy = 32KHz */
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	mov	pc, lr
+
 /*
  * tegra20_enter_sleep
  *
@@ -274,4 +481,95 @@ halted:
 	isb
 	b	halted
 
+/*
+ * tegra20_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * puts sdram in self refresh
+ * must be executed from IRAM
+ */
+tegra20_sdram_self_refresh:
+	mov32	r1, TEGRA_EMC_BASE	@ r1 reserved for emc base addr
+
+	mov	r2, #3
+	str	r2, [r1, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r2, [r1, #EMC_EMC_STATUS]
+	tst	r2, #4
+	beq	emcidle
+
+	mov	r2, #1
+	str	r2, [r1, #EMC_SELF_REF]
+
+	emc_device_mask r2, r1
+
+emcself:
+	ldr	r3, [r1, #EMC_EMC_STATUS]
+	and	r3, r3, r2
+	cmp	r3, r2
+	bne	emcself			@ loop until DDR in self-refresh
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r3, tegra20_sdram_pad_safe
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padsave:
+	ldr	r0, [r2, r5]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r4, r5]		@ save the content of the addr
+
+	ldr	r1, [r3, r5]
+	str	r1, [r0]		@ set the save val to the addr
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padsave
+padsave_done:
+
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	ldr	r0, [r5, #CLK_RESET_SCLK_BURST]
+	adr	r2, tegra20_sclk_save
+	str	r0, [r2]
+	dsb
+	mov	pc, lr
+
+tegra20_sdram_pad_address:
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2
+
+tegra20_sdram_pad_size:
+	.word	tegra20_sdram_pad_size - tegra20_sdram_pad_address
+
+tegra20_sdram_pad_safe:
+	.word	0x8
+	.word	0x8
+	.word	0x0
+	.word	0x8
+	.word	0x5500
+	.word	0x08080040
+	.word	0x0
+
+tegra20_sclk_save:
+	.word	0x0
+
+tegra20_sdram_pad_save:
+	.rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_end
+tegra20_iram_end:
+	b	.
 #endif
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index ada8821b48be..b16d4a57fa59 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -18,13 +18,119 @@
 
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
+#include "irammap.h"
 #include "fuse.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_TIMING_CONTROL		0x28
+#define EMC_REFRESH			0x70
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_MRW				0xe8
+#define EMC_FBIO_CFG5			0x104
+#define EMC_AUTO_CAL_CONFIG		0x2a4
+#define EMC_AUTO_CAL_INTERVAL		0x2a8
+#define EMC_AUTO_CAL_STATUS		0x2ac
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_CFG_DIG_DLL			0x2bc
+#define EMC_EMC_STATUS			0x2b4
+#define EMC_ZCAL_INTERVAL		0x2e0
+#define EMC_ZQ_CAL			0x2ec
+#define EMC_XM2VTTGENPADCTRL		0x310
+#define EMC_XM2VTTGENPADCTRL2		0x314
+
+#define PMC_CTRL			0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE		0xf8
+#define PMC_IO_DPD_REQ			0x1b8
+#define PMC_IO_DPD_STATUS		0x1bc
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLC_MISC		0x8c
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLM_MISC		0x9c
+#define CLK_RESET_PLLP_BASE		0xa0
+#define CLK_RESET_PLLP_MISC		0xac
+#define CLK_RESET_PLLA_BASE		0xb0
+#define CLK_RESET_PLLA_MISC		0xbc
+#define CLK_RESET_PLLX_BASE		0xe0
+#define CLK_RESET_PLLX_MISC		0xe4
+#define CLK_RESET_PLLX_MISC3		0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ	3
+#define CLK_RESET_PLLM_MISC_IDDQ	5
+#define CLK_RESET_PLLC_MISC_IDDQ	26
+
+#define CLK_RESET_CLK_SOURCE_MSELECT	0x3b4
+
+#define MSELECT_CLKM			(0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
 #define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
 
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #0x1
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+	mov	\rd, #1
+	str	\rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+	ldr	\rd, [\base, #EMC_EMC_STATUS]
+	tst	\rd, #(0x1<<23)	@ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+	bne	1001b
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+	/* Enable lock detector */
+	.if	\pll_misc
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	bic	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	orr	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	.endif
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base
+1:
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 27)
+	beq	1b
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	bic	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	orr	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra30_hotplug_shutdown(void)
@@ -99,6 +205,8 @@ flow_ctrl_setting_for_lp2:
 	cmp	r10, #TEGRA30
 	moveq   r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT	@ For LP2
 	movne	r3, #FLOW_CTRL_WAITEVENT
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
 flow_ctrl_done:
 	cmp	r10, #TEGRA30
 	str	r3, [r2]
@@ -127,6 +235,41 @@ ENDPROC(tegra30_cpu_shutdown)
 
 #ifdef CONFIG_PM_SLEEP
 /*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+	/* Flush, disable the L1 data cache and exit SMP */
+	bl	tegra_disable_clean_inv_dcache
+
+	/*
+	 * Preload all the address literals that are needed for the
+	 * CPU power-gating process, to avoid loading from SDRAM which
+	 * are not supported once SDRAM is put into self-refresh.
+	 * LP0 / LP1 use physical address, since the MMU needs to be
+	 * disabled before putting SDRAM into self-refresh to avoid
+	 * memory access due to page table walks.
+	 */
+	mov32	r4, TEGRA_PMC_BASE
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+	mov32	r7, TEGRA_TMRUS_BASE
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra30_tear_down_core
+	mov32	r1, tegra30_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	mov	pc, r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
  * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
  *
  * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
@@ -135,6 +278,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
 	mov	r7, lr
 
 	/* Flush and disable the L1 data cache */
+	mov 	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
 	/* Powergate this CPU. */
@@ -155,6 +299,368 @@ ENTRY(tegra30_tear_down_cpu)
 	b	tegra30_enter_sleep
 ENDPROC(tegra30_tear_down_cpu)
 
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	beq	_no_pll_iddq_exit
+
+	pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r3
+
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	orr	r1, r1, #(1 << 12)
+	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
+
+	b	_pll_m_c_x_done
+
+_no_pll_iddq_exit:
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	orr	r1, r1, #(1 << 12)
+	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
+
+_pll_m_c_x_done:
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
+	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
+
+	pll_locked r1, r0, CLK_RESET_PLLM_BASE
+	pll_locked r1, r0, CLK_RESET_PLLP_BASE
+	pll_locked r1, r0, CLK_RESET_PLLA_BASE
+	pll_locked r1, r0, CLK_RESET_PLLC_BASE
+	pll_locked r1, r0, CLK_RESET_PLLX_BASE
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #LOCK_DELAY
+	wait_until r1, r7, r3
+
+	adr	r5, tegra_sdram_pad_save
+
+	ldr	r4, [r5, #0x18]		@ restore CLK_SOURCE_MSELECT
+	str	r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	ldr	r4, [r5, #0x1C]		@ restore SCLK_BURST
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+
+	cmp	r10, #TEGRA30
+	movweq	r4, #:lower16:((1 << 28) | (0x8))	@ burst policy is PLLX
+	movteq	r4, #:upper16:((1 << 28) | (0x8))
+	movwne	r4, #:lower16:((1 << 28) | (0xe))
+	movtne	r4, #:upper16:((1 << 28) | (0xe))
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	/* Restore pad power state to normal */
+	ldr	r1, [r5, #0x14]		@ PMC_IO_DPD_STATUS
+	mvn	r1, r1
+	bic	r1, r1, #(1 << 31)
+	orr	r1, r1, #(1 << 30)
+	str	r1, [r2, #PMC_IO_DPD_REQ]	@ DPD_OFF
+
+	cmp	r10, #TEGRA30
+	movweq	r0, #:lower16:TEGRA_EMC_BASE	@ r0 reserved for emc base
+	movteq	r0, #:upper16:TEGRA_EMC_BASE
+	cmp	r10, #TEGRA114
+	movweq	r0, #:lower16:TEGRA_EMC0_BASE
+	movteq	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	movweq	r0, #:lower16:TEGRA124_EMC_BASE
+	movteq	r0, #:upper16:TEGRA124_EMC_BASE
+
+exit_self_refresh:
+	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r5, #0x10]		@ restore EMC_XM2VTTGENPADCTRL2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	ldr	r1, [r5, #0x8]		@ restore EMC_AUTO_CAL_INTERVAL
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+	/* Relock DLL */
+	ldr	r1, [r0, #EMC_CFG_DIG_DLL]
+	orr	r1, r1, #(1 << 30)	@ set DLL_RESET
+	str	r1, [r0, #EMC_CFG_DIG_DLL]
+
+	emc_timing_update r1, r0
+
+	cmp	r10, #TEGRA114
+	movweq	r1, #:lower16:TEGRA_EMC1_BASE
+	movteq	r1, #:upper16:TEGRA_EMC1_BASE
+	cmpeq	r0, r1
+
+	ldr	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+	orr	r1, r1, #(1 << 31)	@ set AUTO_CAL_ACTIVE
+	orreq	r1, r1, #(1 << 27)	@ set slave mode for channel 1
+	str	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal_onetime
+
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP_PD
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	cmp	r10, #TEGRA30
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_REFRESH]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	lsr	r1, r1, #8		@ devSel, bit0:dev0, bit1:dev1
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r2, [r0, #EMC_FBIO_CFG5]
+
+	and	r2, r2,	#3		@ check DRAM_TYPE
+	cmp	r2, #2
+	beq	emc_lpddr2
+
+	/* Issue a ZQ_CAL for dev0 - DDR3 */
+	mov32	r2, 0x80000011		@ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev1 - DDR3 */
+	mov32	r2, 0x40000011		@ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+	b	zcal_done
+
+emc_lpddr2:
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x800A00AB		@ DEV_SELECTION=2, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x400A00AB		@ DEV_SELECTION=1, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+zcal_done:
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+	ldr	r1, [r5, #0x4]		@ restore EMC_ZCAL_INTERVAL
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	ldr	r1, [r5, #0x0]		@ restore EMC_CFG
+	str	r1, [r0, #EMC_CFG]
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	__no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	addne	r5, r5, #0x20
+	bne	exit_self_refresh
+__no_dual_emc_chanl:
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	mov	pc, r0			@ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+	.align	L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+	.word	TEGRA_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra30_sdram_pad_address_end:
+
+tegra114_sdram_pad_address:
+	.word	TEGRA_EMC0_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_EMC1_BASE + EMC_CFG				@0x20
+	.word	TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL			@0x24
+	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+	.word	TEGRA124_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL		@0x8
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL		@0xc
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2		@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra124_sdram_pad_address_end:
+
+tegra30_sdram_pad_size:
+	.word	tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+	.word	tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
+
+	.type	tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+	.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+	bl	tegra30_sdram_self_refresh
+	bl	tegra30_switch_cpu_to_clk32k
+	b	tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+	/*
+	 * start by jumping to CLKM to safely disable PLLs, then jump to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	/* 2uS delay delay between changing SCLK and CCLK */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* switch the clock source of mselect to be CLK_M */
+	ldr	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+	orr	r0, r0, #MSELECT_CLKM
+	str	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* disable PLLM via PMC in LP1 */
+	ldr	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+	bic	r0, r0, #(1 << 12)
+	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+	/* disable PLLP, PLLA, PLLC and PLLX */
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLA_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLX_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLX_BASE]
+
+	cmp	r10, #TEGRA30
+	beq	_no_pll_in_iddq
+	pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+	/* switch to CLKS */
+	mov	r0, #0	/* brust policy = 32KHz */
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	mov	pc, lr
+
 /*
  * tegra30_enter_sleep
  *
@@ -172,8 +678,12 @@ tegra30_enter_sleep:
 	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
 	str	r0, [r6, r2]
 
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
 	mov	r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
-	orr	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orreq	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orrne   r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
 	cpu_to_halt_reg r2, r1
 	str	r0, [r6, r2]
 	dsb
@@ -187,4 +697,134 @@ halted:
 	/* !!!FIXME!!! Implement halt failure handler */
 	b	halted
 
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+	adr	r8, tegra_sdram_pad_save
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	adreq	r2, tegra30_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+	cmp	r10, #TEGRA114
+	adreq	r2, tegra114_sdram_pad_address
+	ldreq	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA124
+	adreq	r2, tegra124_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+
+	mov	r9, #0
+
+padsave:
+	ldr	r0, [r2, r9]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r8, r9]		@ save the content of the addr
+
+	add	r9, r9, #4
+	cmp	r3, r9
+	bne	padsave
+padsave_done:
+
+	dsb
+
+	cmp	r10, #TEGRA30
+	ldreq	r0, =TEGRA_EMC_BASE	@ r0 reserved for emc base addr
+	cmp	r10, #TEGRA114
+	ldreq	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	ldreq	r0, =TEGRA124_EMC_BASE
+
+enter_self_refresh:
+	cmp	r10, #TEGRA30
+	mov	r1, #0
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 28)
+	bicne	r1, r1, #(1 << 29)
+	str	r1, [r0, #EMC_CFG]	@ disable DYN_SELF_REF
+
+	emc_timing_update r1, r0
+
+	ldr	r1, [r7]
+	add	r1, r1, #5
+	wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal
+
+	mov	r1, #3
+	str	r1, [r0, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r1, [r0, #EMC_EMC_STATUS]
+	tst	r1, #4
+	beq	emcidle
+
+	mov	r1, #1
+	str	r1, [r0, #EMC_SELF_REF]
+
+	emc_device_mask r1, r0
+
+emcself:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	and	r2, r2, r1
+	cmp	r2, r1
+	bne	emcself			@ loop until DDR in self-refresh
+
+	/* Put VTTGEN in the lowest power mode */
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	mov32	r2, 0xF8F8FFFF	@ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+	and	r1, r1, r2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	cmp	r10, #TEGRA30
+	orreq	r1, r1, #7		@ set E_NO_VTTGEN
+	orrne	r1, r1, #0x3f
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	bne	enter_self_refresh
+no_dual_emc_chanl:
+
+	ldr	r1, [r4, #PMC_CTRL]
+	tst	r1, #PMC_CTRL_SIDE_EFFECT_LP0
+	bne	pmc_io_dpd_skip
+	/*
+	 * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+	 * and COMP in the lowest power mode when LP1.
+	 */
+	mov32	r1, 0x8EC00000
+	str	r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+	dsb
+
+	mov	pc, lr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.global tegra30_iram_end
+tegra30_iram_end:
+	b	.
 #endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 9daaef26b0f6..8d06213fbc47 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -56,7 +56,9 @@ ENTRY(tegra_disable_clean_inv_dcache)
 	isb
 
 	/* Flush the D-cache */
-	bl	v7_flush_dcache_louis
+	cmp	r0, #TEGRA_FLUSH_CACHE_ALL
+	blne	v7_flush_dcache_louis
+	bleq	v7_flush_dcache_all
 
 	/* Trun off coherency */
 	exit_smp r4, r5
@@ -67,15 +69,40 @@ ENDPROC(tegra_disable_clean_inv_dcache)
 
 #ifdef CONFIG_PM_SLEEP
 /*
+ * tegra_init_l2_for_a15
+ *
+ * set up the correct L2 cache data RAM latency
+ */
+ENTRY(tegra_init_l2_for_a15)
+	mrc	p15, 0, r0, c0, c0, 5
+	ubfx	r0, r0, #8, #4
+	tst	r0, #1				@ only need for cluster 0
+	bne	_exit_init_l2_a15
+
+	mrc	p15, 0x1, r0, c9, c0, 2
+	and	r0, r0, #7
+	cmp	r0, #2
+	bicne	r0, r0, #7
+	orrne	r0, r0, #2
+	mcrne	p15, 0x1, r0, c9, c0, 2
+_exit_init_l2_a15:
+
+	mov	pc, lr
+ENDPROC(tegra_init_l2_for_a15)
+
+/*
  * tegra_sleep_cpu_finish(unsigned long v2p)
  *
  * enters suspend in LP2 by turning off the mmu and jumping to
  * tegra?_tear_down_cpu
  */
 ENTRY(tegra_sleep_cpu_finish)
+	mov	r4, r0
 	/* Flush and disable the L1 data cache */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
 
+	mov	r0, r4
 	mov32	r6, tegra_tear_down_cpu
 	ldr	r1, [r6]
 	add	r1, r1, r0
@@ -107,10 +134,10 @@ ENTRY(tegra_shut_off_mmu)
 #ifdef CONFIG_CACHE_L2X0
 	/* Disable L2 cache */
 	check_cpu_part_num 0xc09, r9, r10
-	movweq	r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	movteq	r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	moveq	r5, #0
-	streq	r5, [r4, #L2X0_CTRL]
+	movweq	r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+	movteq	r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+	moveq	r3, #0
+	streq	r3, [r2, #L2X0_CTRL]
 #endif
 	mov	pc, r0
 ENDPROC(tegra_shut_off_mmu)
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 98b7da698f2b..a4edbb3abd3d 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -41,7 +41,19 @@
 #define CPU_NOT_RESETTABLE	0
 #endif
 
+/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
+#define TEGRA_FLUSH_CACHE_LOUIS	0
+#define TEGRA_FLUSH_CACHE_ALL	1
+
 #ifdef __ASSEMBLY__
+/* waits until the microsecond counter (base) is > rn */
+.macro wait_until, rn, base, tmp
+	add	\rn, \rn, #1
+1001:	ldr	\tmp, [\base]
+	cmp	\tmp, \rn
+	bmi	1001b
+.endm
+
 /* returns the offset of the flow controller halt register for a cpu */
 .macro cpu_to_halt_reg rd, rcpu
 	cmp	\rcpu, #0
@@ -144,7 +156,7 @@ void tegra_pen_lock(void);
 void tegra_pen_unlock(void);
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
-void tegra_disable_clean_inv_dcache(void);
+void tegra_disable_clean_inv_dcache(u32 flag);
 
 #ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_shutdown(void);
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index fc97cfd52769..ce553d557c31 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -34,16 +33,78 @@
 #include <linux/sys_soc.h>
 #include <linux/usb/tegra_usb_phy.h>
 #include <linux/clk/tegra.h>
+#include <linux/irqchip.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
 
+#include "apbio.h"
 #include "board.h"
 #include "common.h"
+#include "cpuidle.h"
 #include "fuse.h"
 #include "iomap.h"
+#include "irq.h"
+#include "pmc.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 tegra_uart_config[4] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+	/* Scratch space for debug macro */
+	0,
+};
+
+static void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	int ret;
+	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+	u32 aux_ctrl, cache_type;
+
+	cache_type = readl(p + L2X0_CACHE_TYPE);
+	aux_ctrl = (cache_type & 0x700) << (17-8);
+	aux_ctrl |= 0x7C400001;
+
+	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	if (!ret)
+		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
+#endif
+}
+
+static void __init tegra_init_early(void)
+{
+	tegra_cpu_reset_handler_init();
+	tegra_apb_io_init();
+	tegra_init_fuse();
+	tegra_init_cache();
+	tegra_powergate_init();
+	tegra_hotplug_init();
+}
+
+static void __init tegra_dt_init_irq(void)
+{
+	tegra_pmc_init_irq();
+	tegra_init_irq();
+	irqchip_init();
+	tegra_legacy_irq_syscore_init();
+}
 
 static void __init tegra_dt_init(void)
 {
@@ -51,6 +112,8 @@ static void __init tegra_dt_init(void)
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
 
+	tegra_pmc_init();
+
 	tegra_clocks_apply_init_table();
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -80,28 +143,6 @@ out:
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 }
 
-static void __init trimslice_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
-	int ret;
-
-	ret = tegra_pcie_init(true, true);
-	if (ret)
-		pr_err("tegra_pci_init() failed: %d\n", ret);
-#endif
-}
-
-static void __init harmony_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
-	int ret;
-
-	ret = harmony_pcie_init();
-	if (ret)
-		pr_err("harmony_pcie_init() failed: %d\n", ret);
-#endif
-}
-
 static void __init paz00_init(void)
 {
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
@@ -112,8 +153,6 @@ static struct {
 	char *machine;
 	void (*init)(void);
 } board_init_funcs[] = {
-	{ "compulab,trimslice", trimslice_init },
-	{ "nvidia,harmony", harmony_init },
 	{ "compal,paz00", paz00_init },
 };
 
@@ -121,7 +160,9 @@ static void __init tegra_dt_init_late(void)
 {
 	int i;
 
-	tegra_init_late();
+	tegra_init_suspend();
+	tegra_cpuidle_init();
+	tegra_powergate_debugfs_init();
 
 	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
 		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
@@ -132,6 +173,7 @@ static void __init tegra_dt_init_late(void)
 }
 
 static const char * const tegra_dt_board_compat[] = {
+	"nvidia,tegra124",
 	"nvidia,tegra114",
 	"nvidia,tegra30",
 	"nvidia,tegra20",
@@ -143,9 +185,8 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
 	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.init_time	= clocksource_of_init,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
-	.restart	= tegra_assert_system_reset,
+	.restart	= tegra_pmc_restart,
 	.dt_compat	= tegra_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index a85adcd00882..8e23071bd1b3 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,7 +1,3 @@
-menu "ST-Ericsson AB U300/U335 Platform"
-
-comment "ST-Ericsson Mobile Platform Products"
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
 	depends on MMU
@@ -9,7 +5,6 @@ config ARCH_U300
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
@@ -25,7 +20,9 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
-comment "ST-Ericsson U300/U335 Feature Selections"
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U335 Platform"
 
 config MACH_U300
 	depends on ARCH_U300
@@ -53,3 +50,5 @@ config MACH_U300_SPIDUMMY
 		SPI framework and ARM PL022 support.
 
 endmenu
+
+endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index b5db207dfd1e..9a5f9fb352ce 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -358,8 +358,7 @@ static struct delay_timer u300_delay_timer;
  */
 static void __init u300_timer_init_of(struct device_node *np)
 {
-	struct resource irq_res;
-	int irq;
+	unsigned int irq;
 	struct clk *clk;
 	unsigned long rate;
 
@@ -368,11 +367,11 @@ static void __init u300_timer_init_of(struct device_node *np)
 		panic("could not ioremap system timer\n");
 
 	/* Get the IRQ for the GP1 timer */
-	irq = of_irq_to_resource(np, 2, &irq_res);
-	if (irq <= 0)
+	irq = irq_of_parse_and_map(np, 2);
+	if (!irq)
 		panic("no IRQ for system timer\n");
 
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq);
+	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
 
 	/* Clock the interrupt controller */
 	clk = of_clk_get(np, 0);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b19b07204aaf..0034d2cd6973 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,40 +1,34 @@
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
 	depends on MMU
+	select AB8500_CORE
+	select ABX500_CORE
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
-if ARCH_U8500
-
-config UX500_SOC_COMMON
-	bool
-	default y
-	select ABX500_CORE
-	select AB8500_CORE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
-	select PINCTRL_NOMADIK
 	select PINCTRL_ABX500
+	select PINCTRL_NOMADIK
 	select PL310_ERRATA_753970 if CACHE_PL310
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
+if ARCH_U8500
 
 config UX500_SOC_DB8500
 	bool
-	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
 	select PINCTRL_DB8500
 	select PINCTRL_DB8540
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index fe1f3e26b88b..616b96e86ad4 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,14 +2,11 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o pm.o
+obj-y				:= cpu.o devices.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
-				board-mop500-uib.o board-mop500-stuib.o \
-				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index bfe443daf4b0..154e15f59702 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -17,7 +17,6 @@
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
@@ -69,40 +68,6 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
 	.phy_channel = 1,
 };
 
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
-			int id,
-			resource_size_t base, int irq,
-			struct msp_i2s_platform_data *pdata)
-{
-	struct platform_device *pdev;
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
-		id, irq);
-	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
-						res, ARRAY_SIZE(res),
-						pdata, sizeof(*pdata));
-	if (!pdev) {
-		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
-			id);
-		return NULL;
-	}
-
-	return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
-	.name = "snd-soc-mop500",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
 struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -114,19 +79,3 @@ struct msp_i2s_platform_data msp3_platform_data = {
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };
-
-void mop500_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-	platform_device_register(&snd_soc_mop500);
-
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 7936d40a5c37..0efb1560fc35 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -14,7 +14,6 @@
 
 #include <asm/mach-types.h>
 
-#include "pins-db8500.h"
 #include "board-mop500.h"
 
 enum custom_pin_cfg_t {
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index b3e61a38e5c8..26600a1c5319 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,18 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(struct device *parent)
-{
-	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
-}
-
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_configure(parent);
-}
-
 /*
  * SDI1 (SDIO WLAN)
  */
@@ -178,42 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = {
 	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
 #endif
 };
-
-void __init mop500_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
-}
-
-void __init snowball_sdi_init(struct device *parent)
-{
-	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
-	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-	mop500_sdi0_data.cd_invert = true;
-	sdi0_configure(parent);
-}
-
-void __init hrefv60_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_configure(parent);
-	/* WLAN SDIO channel */
-	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
deleted file mode 100644
index 7e1f294f0434..000000000000
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/input/bu21013.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/input/matrix_keypad.h>
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id		= 1,
-	.blocks		= STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad		= &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * BU21013 ROHM touchscreen interface on the STUIBs
- */
-
-#define TOUCH_GPIO_PIN  84
-
-#define TOUCH_XMAX	384
-#define TOUCH_YMAX	704
-
-#define PRCMU_CLOCK_OCR		0x1CC
-#define TSC_EXT_CLOCK_9_6MHZ	0x840000
-
-static struct bu21013_platform_device tsc_plat_device = {
-	.touch_pin = TOUCH_GPIO_PIN,
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5C),
-		.platform_data = &tsc_plat_device,
-	},
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5D),
-		.platform_data = &tsc_plat_device,
-	},
-};
-
-void __init mop500_stuib_init(void)
-{
-	if (machine_is_hrefv60())
-		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-	else
-		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
-			ARRAY_SIZE(u8500_i2c3_devices_stuib));
-}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
deleted file mode 100644
index d397c19570af..000000000000
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Board data for the U8500 UIB, also known as the New UIB
- * License terms: GNU General Public License (GPL), version 2
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include "irqs.h"
-
-#include "board-mop500.h"
-
-static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
-		.irq = NOMADIK_GPIO_TO_IRQ(84),
-	},
-};
-
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
-void __init mop500_u8500uib_init(void)
-{
-	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
-			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
-}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
deleted file mode 100644
index bdaa422da028..000000000000
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#define pr_fmt(fmt)	"mop500-uib: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-
-#include "board-mop500.h"
-#include "id.h"
-
-enum mop500_uib {
-	STUIB,
-	U8500UIB,
-};
-
-struct uib {
-	const char *name;
-	const char *option;
-	void (*init)(void);
-};
-
-static struct uib __initdata mop500_uibs[] = {
-	[STUIB] = {
-		.name	= "ST-UIB",
-		.option	= "stuib",
-		.init	= mop500_stuib_init,
-	},
-	[U8500UIB] = {
-		.name	= "U8500-UIB",
-		.option	= "u8500uib",
-		.init	= mop500_u8500uib_init,
-	},
-};
-
-static struct uib *mop500_uib;
-
-static int __init mop500_uib_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
-		struct uib *uib = &mop500_uibs[i];
-
-		if (!strcmp(str, uib->option)) {
-			mop500_uib = uib;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(mop500_uibs))
-		pr_err("invalid uib= option (%s)\n", str);
-
-	return 1;
-}
-__setup("uib=", mop500_uib_setup);
-
-/*
- * The UIBs are detected after the I2C host controllers are registered, so
- * i2c_register_board_info() can't be used.
- */
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n)
-{
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-	int i;
-
-	adap = i2c_get_adapter(busnum);
-	if (!adap) {
-		pr_err("failed to get adapter i2c%d\n", busnum);
-		return;
-	}
-
-	for (i = 0; i < n; i++) {
-		client = i2c_new_device(adap, &info[i]);
-		if (!client)
-			pr_err("failed to register %s to i2c%d\n",
-					info[i].type, busnum);
-	}
-
-	i2c_put_adapter(adap);
-}
-
-static void __init __mop500_uib_init(struct uib *uib, const char *why)
-{
-	pr_info("%s (%s)\n", uib->name, why);
-	uib->init();
-}
-
-/*
- * Detect the UIB attached based on the presence or absence of i2c devices.
- */
-int __init mop500_uib_init(void)
-{
-	struct uib *uib = mop500_uib;
-	struct i2c_adapter *i2c0;
-	int ret;
-
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
-	if (uib) {
-		__mop500_uib_init(uib, "from uib= boot argument");
-		return 0;
-	}
-
-	i2c0 = i2c_get_adapter(0);
-	if (!i2c0) {
-		__mop500_uib_init(&mop500_uibs[STUIB],
-				"fallback, could not get i2c0");
-		return -ENODEV;
-	}
-
-	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
-	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
-			I2C_SMBUS_QUICK, NULL);
-	i2c_put_adapter(i2c0);
-
-	if (ret == 0)
-		uib = &mop500_uibs[U8500UIB];
-	else
-		uib = &mop500_uibs[STUIB];
-
-	__mop500_uib_init(uib, "detected");
-
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index df5d27a532e9..514d40b625a4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -14,27 +14,16 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/platform_data/db8500_thermal.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/amba/serial.h>
-#include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
-#include <linux/mfd/abx500/ab8500-codec.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
@@ -42,12 +31,10 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
-#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
@@ -55,392 +42,9 @@
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
-static struct gpio_led snowball_led_array[] = {
-	{
-		.name = "user_led",
-		.default_trigger = "heartbeat",
-		.gpio = 142,
-	},
-};
-
-static struct gpio_led_platform_data snowball_led_data = {
-	.leds = snowball_led_array,
-	.num_leds = ARRAY_SIZE(snowball_led_array),
-};
-
-static struct platform_device snowball_led_dev = {
-	.name = "leds-gpio",
-	.dev = {
-		.platform_data = &snowball_led_data,
-	},
-};
-
-static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
-       .supply_name            = "EN-3V3",
-       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
-       .microvolts             = 3300000,
-       .enable_high            = 1,
-       .init_data              = &gpio_en_3v3_regulator,
-       .startup_delay          = 5000, /* 1200us */
-};
-
-static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
-       .name   = "reg-fixed-voltage",
-       .id     = 1,
-       .dev    = {
-               .platform_data  = &snowball_gpio_en_3v3_data,
-       },
-};
-
-/* Dynamically populated. */
-static struct gpio sdi0_reg_gpios[] = {
-	{ 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" },
-};
-
-static struct gpio_regulator_state sdi0_reg_states[] = {
-	{ .value = 2900000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config sdi0_reg_info = {
-	.supply_name		= "ext-mmc-level-shifter",
-	.gpios			= sdi0_reg_gpios,
-	.nr_gpios		= ARRAY_SIZE(sdi0_reg_gpios),
-	.states			= sdi0_reg_states,
-	.nr_states		= ARRAY_SIZE(sdi0_reg_states),
-	.type			= REGULATOR_VOLTAGE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdi0_reg_init_data,
-	.startup_delay		= 100,
-};
-
-static struct platform_device sdi0_regulator = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &sdi0_reg_info,
-	},
-};
-
-static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-};
-
-/* ab8500-codec */
-static struct ab8500_codec_platform_data ab8500_codec_pdata = {
-	.amics =  {
-		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic2_micbias = AMIC_MICBIAS_VAMIC2
-	},
-	.ear_cmv = EAR_CMV_0_95V
-};
-
-static struct gpio_keys_button snowball_key_array[] = {
-	{
-		.gpio           = 32,
-		.type           = EV_KEY,
-		.code           = KEY_1,
-		.desc           = "userpb",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 151,
-		.type           = EV_KEY,
-		.code           = KEY_2,
-		.desc           = "extkb1",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 152,
-		.type           = EV_KEY,
-		.code           = KEY_3,
-		.desc           = "extkb2",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 161,
-		.type           = EV_KEY,
-		.code           = KEY_4,
-		.desc           = "extkb3",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 162,
-		.type           = EV_KEY,
-		.code           = KEY_5,
-		.desc           = "extkb4",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-};
-
-static struct gpio_keys_platform_data snowball_key_data = {
-	.buttons        = snowball_key_array,
-	.nbuttons       = ARRAY_SIZE(snowball_key_array),
-};
-
-static struct platform_device snowball_key_dev = {
-	.name           = "gpio-keys",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &snowball_key_data,
-	}
-};
-
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = (0x5000 << 16),
-		.end  =  (0x5000 << 16) + 0xffff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = NOMADIK_GPIO_TO_IRQ(140),
-		.end = NOMADIK_GPIO_TO_IRQ(140),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device snowball_sbnet_dev = {
-	.name           = "smsc911x",
-	.num_resources  = ARRAY_SIZE(sbnet_res),
-	.resource       = sbnet_res,
-	.dev            = {
-		.platform_data = &snowball_sbnet_cfg,
-	},
-};
-
 struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= &ab8500_regulator_plat_data,
-	.gpio		= &ab8500_gpio_pdata,
-	.codec		= &ab8500_codec_pdata,
-};
-
-static struct platform_device u8500_cpufreq_cooling_device = {
-	.name           = "db8500-cpufreq-cooling",
-};
-
-/*
- * TPS61052
- */
-
-static struct tps6105x_platform_data mop500_tps61052_data = {
-	.mode = TPS6105X_MODE_VOLTAGE,
-	.regulator_data = &tps61052_regulator,
-};
-
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct lp55xx_led_config lp5521_pri_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_pri_data = {
-       .label = "lp5521_pri",
-       .led_config     = &lp5521_pri_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct lp55xx_led_config lp5521_sec_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_sec_data = {
-       .label = "lp5521_sec",
-       .led_config     = &lp5521_sec_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-	/* I2C0 devices only available prior to HREFv60 */
-	{
-		I2C_BOARD_INFO("tps61052", 0x33),
-		.platform_data  = &mop500_tps61052_data,
-	},
-};
-
-#define NUM_PRE_V60_I2C0_DEVICES 1
-
-static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
-	{
-		/* lp5521 LED driver, 1st device */
-		I2C_BOARD_INFO("lp5521", 0x33),
-		.platform_data = &lp5521_pri_data,
-	},
-	{
-		/* lp5521 LED driver, 2st device */
-		I2C_BOARD_INFO("lp5521", 0x34),
-		.platform_data = &lp5521_sec_data,
-	},
-	{
-		/* Light sensor Rohm BH1780GLI */
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-
-static void __init mop500_i2c_init(struct device *parent)
-{
-	db8500_add_i2c0(parent, NULL);
-	db8500_add_i2c1(parent, NULL);
-	db8500_add_i2c2(parent, NULL);
-	db8500_add_i2c3(parent, NULL);
-}
-
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-
-	return regulator_enable(prox_regulator);
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-static struct cryp_platform_data u8500_cryp1_platform_data = {
-		.mem_to_engine = {
-				.dir = DMA_MEM_TO_DEV,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		},
-		.engine_to_mem = {
-				.dir = DMA_DEV_TO_MEM,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		}
-};
-
-static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = DMA_MEM_TO_DEV,
-		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
-		.mode = STEDMA40_MODE_LOGICAL,
-};
-
-static struct hash_platform_data u8500_hash1_platform_data = {
-		.mem_to_engine = &u8500_hash_dma_cfg_tx,
-		.dma_filter = stedma40_filter,
-};
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-	&sdi0_regulator,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -472,248 +76,3 @@ struct pl022_ssp_controller ssp0_plat = {
 	 */
 	.num_chipselect = 5,
 };
-
-static void __init mop500_spi_init(struct device *parent)
-{
-	db8500_add_ssp0(parent, &ssp0_plat);
-}
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-#endif
-
-struct amba_pl011_data uart0_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart0_dma_cfg_rx,
-	.dma_tx_param = &uart0_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart1_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart1_dma_cfg_rx,
-	.dma_tx_param = &uart1_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart2_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart2_dma_cfg_rx,
-	.dma_tx_param = &uart2_dma_cfg_tx,
-#endif
-};
-
-static void __init mop500_uart_init(struct device *parent)
-{
-	db8500_add_uart0(parent, &uart0_plat);
-	db8500_add_uart1(parent, &uart1_plat);
-	db8500_add_uart2(parent, &uart2_plat);
-}
-
-static void __init u8500_cryp1_hash1_init(struct device *parent)
-{
-	db8500_add_cryp1(parent, &u8500_cryp1_platform_data);
-	db8500_add_hash1(parent, &u8500_hash1_platform_data);
-}
-
-static struct platform_device *snowball_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-	&snowball_sbnet_dev,
-	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_cpufreq_cooling_device,
-	&sdi0_regulator,
-};
-
-static void __init mop500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-	sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
-	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
-
-	mop500_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	mop500_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init snowball_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-
-	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
-
-	snowball_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(snowball_platform_devs,
-			ARRAY_SIZE(snowball_platform_devs));
-
-	mop500_i2c_init(parent);
-	snowball_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init hrefv60_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-
-	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
-
-	hrefv60_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	hrefv60_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
-	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= hrefv60_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= snowball_init_machine,
-	.init_late	= NULL,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d6fab166cbf1..511d6febbe99 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -79,7 +79,6 @@
 #define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
 
 struct device;
-struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
 extern struct mmci_platform_data mop500_sdi1_data;
 extern struct mmci_platform_data mop500_sdi2_data;
@@ -88,25 +87,10 @@ extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct arm_pmu_platdata db8500_pmu_platdata;
-extern struct amba_pl011_data uart0_plat;
-extern struct amba_pl011_data uart1_plat;
-extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
-extern struct stedma40_platform_data dma40_plat_data;
 
-extern void mop500_sdi_init(struct device *parent);
-extern void snowball_sdi_init(struct device *parent);
-extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
-void __init mop500_u8500uib_init(void);
-void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
-void mop500_audio_init(struct device *parent);
 
-int __init mop500_uib_init(void);
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n);
 #endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 82ccf1d98735..264f894c0e3d 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void)
 	 * some SMI service available.
 	 */
 	outer_cache.disable = NULL;
+	outer_cache.set_debug = NULL;
 
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12eee8167525..2e85c1e72535 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,14 +26,12 @@
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
 
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
@@ -94,14 +92,6 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 }
 
-static struct resource db8500_pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_DB8500_PMU,
-		.end		= IRQ_DB8500_PMU,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
 /*
  * The PMU IRQ lines of two cores are wired together into a single interrupt.
  * Bounce the interrupt to the other core if it's not ours.
@@ -126,53 +116,6 @@ struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static struct platform_device db8500_pmu_device = {
-	.name			= "arm-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
-	.resource		= db8500_pmu_resources,
-	.dev.platform_data	= &db8500_pmu_platdata,
-};
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-	&db8500_pmu_device,
-};
-
-static resource_size_t __initdata db8500_gpio_base[] = {
-	U8500_GPIOBANK0_BASE,
-	U8500_GPIOBANK1_BASE,
-	U8500_GPIOBANK2_BASE,
-	U8500_GPIOBANK3_BASE,
-	U8500_GPIOBANK4_BASE,
-	U8500_GPIOBANK5_BASE,
-	U8500_GPIOBANK6_BASE,
-	U8500_GPIOBANK7_BASE,
-	U8500_GPIOBANK8_BASE,
-};
-
-static void __init db8500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		.supports_sleepmode = true,
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
-			 IRQ_DB8500_GPIO0, &pdata);
-	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
-}
-
-static int usb_db8500_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
-};
-
 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
@@ -192,60 +135,22 @@ static struct device * __init db8500_soc_device_init(void)
 	return ux500_soc_device_init(soc_id);
 }
 
-/*
- * This function is called from the board init
- */
-struct device * __init u8500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db8500_soc_device_init();
-
-	db8500_add_rtc(parent);
-	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return parent;
-}
-
 #ifdef CONFIG_MACH_UX500_DT
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
-	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
-	/* Requires clock name bindings. */
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
-	OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		       "ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		       "ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		       "ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		       "ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires non-DT:able platform data. */
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -253,17 +158,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
-	/* Requires clock name and DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		"ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		"ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		"ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		"ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires clock name bindings and channel address lookup table. */
-	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
@@ -325,6 +219,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
+	.restart        = ux500_restart,
 MACHINE_END
 
 #endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e6fb0239151b..f84d4397896b 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
 #include "db8500-regs.h"
 #include "id.h"
 
+void ux500_restart(enum reboot_mode mode, const char *cmd)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
+}
+
 /*
  * FIXME: Should we set up the GPIO domain here?
  *
@@ -70,9 +78,17 @@ void __init ux500_init_irq(void)
 	if (cpu_is_u8500_family()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
+
+		if (of_have_populated_dt())
+			u8500_of_clk_init(U8500_CLKRST1_BASE,
+					  U8500_CLKRST2_BASE,
+					  U8500_CLKRST3_BASE,
+					  U8500_CLKRST5_BASE,
+					  U8500_CLKRST6_BASE);
+		else
+			u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+				       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+				       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
@@ -88,11 +104,6 @@ void __init ux500_init_irq(void)
 	}
 }
 
-void __init ux500_init_late(void)
-{
-	mop500_uib_init();
-}
-
 static const char * __init ux500_get_machine(void)
 {
 	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
deleted file mode 100644
index f71b3d7bd4fb..000000000000
--- a/arch/arm/mach-ux500/devices-common.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include "irqs.h"
-
-#include "devices-common.h"
-
-static struct platform_device *
-dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
-		struct nmk_gpio_platform_data *pdata)
-{
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(
-		parent,
-		"gpio",
-		id,
-		resources,
-		ARRAY_SIZE(resources),
-		pdata,
-		sizeof(*pdata));
-}
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata)
-{
-	int first = 0;
-	int i;
-
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
-
-		dbx500_add_gpio(parent, i, base[i], irq, pdata);
-	}
-}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
deleted file mode 100644
index 96fa4ac89e2e..000000000000
--- a/arch/arm/mach-ux500/devices-common.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_COMMON_H
-#define __DEVICES_COMMON_H
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_data/i2c-nomadik.h>
-#include <linux/platform_data/crypto-ux500.h>
-
-struct spi_master_cntlr;
-
-static inline struct amba_device *
-dbx500_add_msp_spi(struct device *parent, const char *name,
-		   resource_size_t base, int irq,
-		   struct spi_master_cntlr *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct spi_master_cntlr *pdata,
-	       u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct mmci_platform_data;
-
-static inline struct amba_device *
-dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct mmci_platform_data *pdata, u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct amba_pl011_data;
-
-static inline struct amba_device *
-dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
-		int irq, struct amba_pl011_data *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-struct nmk_i2c_controller;
-
-static inline struct amba_device *
-dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *data)
-{
-	/* Conjure a name similar to what the platform device used to have */
-	char name[16];
-
-	snprintf(name, sizeof(name), "nmk-i2c.%d", id);
-	return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
-{
-	return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq,
-				0, NULL, 0);
-}
-
-struct cryp_platform_data;
-
-static inline struct platform_device *
-dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq,
-		struct cryp_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-			DEFINE_RES_IRQ(irq),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "cryp1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct hash_platform_data;
-
-static inline struct platform_device *
-dbx500_add_hash1(struct device *parent, int id, resource_size_t base,
-		struct hash_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "hash1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct nmk_gpio_platform_data;
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata);
-
-static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name,
-		   resource_size_t base)
-{
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_8K),
-	};
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = -1,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-	};
-
-	platform_device_register_full(&pdevinfo);
-}
-
-#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 516a6f57d159..c59f89d058ff 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -9,10 +9,8 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include "setup.h"
@@ -20,61 +18,6 @@
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct stedma40_platform_data dma40_plat_data = {
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
-
-struct resource keypad_resources[] = {
-	[0] = {
-		.start = U8500_SKE_BASE,
-		.end = U8500_SKE_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DB8500_KB,
-		.end = IRQ_DB8500_KB,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device u8500_ske_keypad_device = {
-	.name = "nmk-ske-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
@@ -83,39 +26,3 @@ struct prcmu_pdata db8500_prcmu_pdata = {
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
-
-static struct resource db8500_prcmu_res[] = {
-	{
-		.name  = "prcmu",
-		.start = U8500_PRCMU_BASE,
-		.end   = U8500_PRCMU_BASE + SZ_8K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "prcmu-tcdm",
-		.start = U8500_PRCMU_TCDM_BASE,
-		.end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "irq",
-		.start = IRQ_DB8500_PRCMU1,
-		.end   = IRQ_DB8500_PRCMU1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "prcmu-tcpm",
-		.start = U8500_PRCMU_TCPM_BASE,
-		.end   = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-	.resource		= db8500_prcmu_res,
-	.num_resources		= ARRAY_SIZE(db8500_prcmu_res),
-	.dev = {
-		.platform_data = &db8500_prcmu_pdata,
-	},
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 321998320f98..b8ffc9979bb2 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,122 +8,12 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
-#include <linux/platform_data/usb-musb-ux500.h>
 #include "irqs.h"
 #include "db8500-regs.h"
-#include "devices-common.h"
 
-struct ske_keypad_platform_data;
-struct pl022_ssp_controller;
 struct platform_device;
 
 extern struct ab8500_platform_data ab8500_platdata;
 extern struct prcmu_pdata db8500_prcmu_pdata;
-extern struct platform_device db8500_prcmu_device;
 
-static inline struct platform_device *
-db8500_add_ske_keypad(struct device *parent,
-		      struct ske_keypad_platform_data *pdata,
-		      size_t size)
-{
-	struct resource resources[] = {
-		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
-		DEFINE_RES_IRQ(IRQ_DB8500_KB),
-	};
-
-	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
-						 resources, 2, pdata, size);
-}
-
-static inline struct amba_device *
-db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct pl022_ssp_controller *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-#define db8500_add_i2c0(parent, pdata) \
-	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(parent, pdata) \
-	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
-			   IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
-			   IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U8500_USBOTG_BASE, \
-		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
-		       IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
-		       IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
-		       IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
-		       IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
-		       IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
-		       IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(parent, pdata) \
-	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
-		       IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(parent, pdata) \
-	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
-		       IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
-		       IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
-		       IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
-		       IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
-		       IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(parent, pdata) \
-	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
-			IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(parent, pdata) \
-	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
-			IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(parent, pdata) \
-	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
-			IRQ_DB8500_UART2, pdata)
-
-#define db8500_add_cryp1(parent, pdata) \
-	dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata)
-#define db8500_add_hash1(parent, pdata) \
-	dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata)
 #endif
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
index cbc6f1e4104d..5bca7c605cd6 100644
--- a/arch/arm/mach-ux500/devices.h
+++ b/arch/arm/mach-ux500/devices.h
@@ -10,14 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u8500_gpio_devs[];
-
 extern struct amba_device ux500_pl031_device;
 
-extern struct platform_device ux500_hash1_device;
-extern struct platform_device ux500_cryp1_device;
-
-extern struct platform_device u8500_dma40_device;
-extern struct platform_device ux500_ske_keypad_device;
-
 #endif
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index 08da5589bcd8..9cdea049485d 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * U8500 specific entry point for secondary CPUs.
  */
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
deleted file mode 100644
index 062c7acf4576..000000000000
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_PINS_DB8500_H
-#define __MACH_PINS_DB8500_H
-
-/*
- * TODO: Eventually encode all non-board specific pull up/down configuration
- * here.
- */
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
-#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
-#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
-#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
-#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
-#define GPIO2_NONE		PIN_CFG(2, ALT_B)
-#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
-#define GPIO3_NONE		PIN_CFG(3, ALT_B)
-#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL		PIN_CFG(4, ALT_B)
-#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA		PIN_CFG(5, ALT_B)
-#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL		PIN_CFG(6, ALT_B)
-#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA		PIN_CFG(7, ALT_B)
-#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA		PIN_CFG(8, ALT_A)
-#define GPIO8_I2C2_SDA		PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL		PIN_CFG(9, ALT_A)
-#define GPIO9_I2C2_SCL		PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA	PIN_CFG(10, ALT_A)
-#define GPIO10_I2C2_SDA		PIN_CFG(10, ALT_B)
-#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL	PIN_CFG(11, ALT_A)
-#define GPIO11_I2C2_SCL		PIN_CFG(11, ALT_B)
-#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
-#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
-#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL		PIN_CFG(16, ALT_B)
-#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA		PIN_CFG(17, ALT_B)
-#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG_INPUT(18, ALT_A, PULLUP)
-#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
-#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG_INPUT(19, ALT_A, PULLUP)
-#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
-#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG_INPUT(20, ALT_A, PULLUP)
-#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
-#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG_INPUT(21, ALT_A, PULLUP)
-#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
-#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG_INPUT(22, ALT_A, PULLUP)
-#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
-#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG_INPUT(23, ALT_A, PULLUP)
-#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
-#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG_INPUT(24, ALT_A, PULLUP)
-#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
-#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG_INPUT(25, ALT_A, PULLUP)
-#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
-#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG_INPUT(26, ALT_A, PULLUP)
-#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
-#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG_INPUT(27, ALT_A, PULLUP)
-#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
-#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG_INPUT(28, ALT_A, PULLUP)
-#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
-#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
-#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
-#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
-#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
-#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
-#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
-#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
-#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
-#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
-#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
-#define GPIO34_NONE		PIN_CFG(34, ALT_B)
-#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
-#define GPIO35_NONE		PIN_CFG(35, ALT_B)
-#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
-
-#define GPIO36_GPIO		PIN_CFG(36, GPIO)
-#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
-#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
-#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
-#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
-#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
-#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
-#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
-#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
-#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
-#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
-#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
-#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
-#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
-#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
-#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
-#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
-#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
-#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
-#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
-#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
-#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
-#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
-#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
-#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
-#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
-#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
-#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
-#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
-#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
-#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
-#define GPIO77_NONE		PIN_CFG(77, ALT_C)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
-#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
-#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
-#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
-#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
-#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
-#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
-#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
-#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
-#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
-
-#define GPIO83_GPIO		PIN_CFG(83, GPIO)
-#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
-#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
-
-#define GPIO84_GPIO		PIN_CFG(84, GPIO)
-#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
-#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
-
-#define GPIO85_GPIO		PIN_CFG(85, GPIO)
-#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
-#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
-
-#define GPIO86_GPIO		PIN_CFG(86, GPIO)
-#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
-#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
-#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
-
-#define GPIO87_GPIO		PIN_CFG(87, GPIO)
-#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
-#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
-#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
-
-#define GPIO88_GPIO		PIN_CFG(88, GPIO)
-#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
-#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
-#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
-
-#define GPIO89_GPIO		PIN_CFG(89, GPIO)
-#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
-#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
-#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
-
-#define GPIO90_GPIO		PIN_CFG(90, GPIO)
-#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
-#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
-#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
-
-#define GPIO91_GPIO		PIN_CFG(91, GPIO)
-#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
-#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
-#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
-
-#define GPIO92_GPIO		PIN_CFG(92, GPIO)
-#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
-#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
-#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
-
-#define GPIO93_GPIO		PIN_CFG(93, GPIO)
-#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
-#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
-#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
-
-#define GPIO94_GPIO		PIN_CFG(94, GPIO)
-#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
-#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
-#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
-
-#define GPIO95_GPIO		PIN_CFG(95, GPIO)
-#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
-#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
-#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
-#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
-#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
-#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
-#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG_INPUT(128, ALT_A, PULLUP)
-#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG_INPUT(129, ALT_A, PULLUP)
-#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG_INPUT(130, ALT_A, PULLUP)
-#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
-#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG_INPUT(131, ALT_A, PULLUP)
-#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG_INPUT(132, ALT_A, PULLUP)
-#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG_INPUT(133, ALT_A, PULLUP)
-#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG_INPUT(134, ALT_A, PULLUP)
-#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG_INPUT(135, ALT_A, PULLUP)
-#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG_INPUT(136, ALT_A, PULLUP)
-#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG_INPUT(137, ALT_A, PULLUP)
-#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG_INPUT(138, ALT_A, PULLUP)
-#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
-#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
-#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
-#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
-#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
-#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
-#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
-#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
-#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL	PIN_CFG(147, ALT_A)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA	PIN_CFG(148, ALT_A)
-
-#define GPIO149_GPIO		PIN_CFG(149, GPIO)
-#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
-#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
-#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
-
-#define GPIO150_GPIO		PIN_CFG(150, GPIO)
-#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
-#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
-
-#define GPIO151_GPIO		PIN_CFG(151, GPIO)
-#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
-#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
-#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
-
-#define GPIO152_GPIO		PIN_CFG(152, GPIO)
-#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
-#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
-#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
-
-#define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
-#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
-#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
-
-#define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
-#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
-#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
-
-#define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
-#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
-#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
-
-#define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
-#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
-#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
-
-#define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
-#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
-#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
-
-#define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
-#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
-#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
-
-#define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
-#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
-#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
-#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
-#define GPIO160_NONE		PIN_CFG(160, ALT_C)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
-#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
-#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
-#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
-#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
-#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
-#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
-#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
-#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
-#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
-#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
-#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
-#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
-#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
-#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
-#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
-#define GPIO168_NONE		PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
-#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
-#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
-#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
-#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
-#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
-#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG_INPUT(197, ALT_A, PULLUP)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG_INPUT(198, ALT_A, PULLUP)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG_INPUT(199, ALT_A, PULLUP)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG_INPUT(200, ALT_A, PULLUP)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG_INPUT(201, ALT_A, PULLUP)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG_INPUT(202, ALT_A, PULLUP)
-#define GPIO202_PWL		PIN_CFG(202, ALT_B)
-#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG_INPUT(203, ALT_A, PULLUP)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG_INPUT(204, ALT_A, PULLUP)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG_INPUT(205, ALT_A, PULLUP)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG_INPUT(206, ALT_A, PULLUP)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG_INPUT(207, ALT_A, PULLUP)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
-#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
-#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
-#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
-#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
-#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
-#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
-#define GPIO215_SPI2_TXD	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
-#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA	PIN_CFG(216, ALT_C)
-#define GPIO216_SPI2_FRM	PIN_CFG(216, ALT_C)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
-#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
-#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
-#define GPIO217_SPI2_CLK	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
-#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL	PIN_CFG(218, ALT_C)
-#define GPIO218_SPI2_RXD	PIN_CFG(218, ALT_C)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
-#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
-#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
-#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
-#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
-#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
-#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
-#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
-#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
-#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
-#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
-#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
-#define GPIO226_PWL		PIN_CFG(226, ALT_B)
-#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
-
-#define GPIO228_GPIO		PIN_CFG(228, GPIO)
-#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
-
-#define GPIO229_GPIO		PIN_CFG(229, GPIO)
-#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
-#define GPIO229_PWL		PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA	PIN_CFG(229, ALT_C)
-
-#define GPIO230_GPIO		PIN_CFG(230, GPIO)
-#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
-#define GPIO230_PWL		PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL	PIN_CFG(230, ALT_C)
-
-#define GPIO256_GPIO		PIN_CFG(256, GPIO)
-#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
-
-#define GPIO257_GPIO		PIN_CFG(257, GPIO)
-#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
-
-#define GPIO258_GPIO		PIN_CFG(258, GPIO)
-#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
-#define GPIO258_NONE		PIN_CFG(258, ALT_B)
-#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
-
-#define GPIO259_GPIO		PIN_CFG(259, GPIO)
-#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
-
-#define GPIO260_GPIO		PIN_CFG(260, GPIO)
-#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
-
-#define GPIO261_GPIO		PIN_CFG(261, GPIO)
-#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
-
-#define GPIO262_GPIO		PIN_CFG(262, GPIO)
-#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
-
-#define GPIO263_GPIO		PIN_CFG(263, GPIO)
-#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
-
-#define GPIO264_GPIO		PIN_CFG(264, GPIO)
-#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
-
-#define GPIO265_GPIO		PIN_CFG(265, GPIO)
-#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
-
-#define GPIO266_GPIO		PIN_CFG(266, GPIO)
-#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
-
-#define GPIO267_GPIO		PIN_CFG(267, GPIO)
-#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
-
-#endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca86c540..bdb356498a74 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,17 +11,19 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
+#include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
+void ux500_restart(enum reboot_mode mode, const char *cmd);
+
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);
 
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
-extern void __init ux500_init_late(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index b6bd0efcbe64..05a4ff78b3bd 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -97,8 +97,8 @@ dt_fail:
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */
-
-	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
+	if (!of_have_populated_dt())
+		nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index b7bd8d3a5507..000000000000
--- a/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include "db8500-regs.h"
-
-#define MUSB_DMA40_RX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_DEV_TO_MEM, \
-	}
-
-#define MUSB_DMA40_TX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_MEM_TO_DEV, \
-	}
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_rx_ch[0],
-	&musb_dma_rx_ch[1],
-	&musb_dma_rx_ch[2],
-	&musb_dma_rx_ch[3],
-	&musb_dma_rx_ch[4],
-	&musb_dma_rx_ch[5],
-	&musb_dma_rx_ch[6],
-	&musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_tx_ch[0],
-	&musb_dma_tx_ch[1],
-	&musb_dma_tx_ch[2],
-	&musb_dma_tx_ch[3],
-	&musb_dma_tx_ch[4],
-	&musb_dma_tx_ch[5],
-	&musb_dma_tx_ch[6],
-	&musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
-	.dma_rx_param_array = ux500_dma_rx_param_array,
-	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.dma_filter = stedma40_filter,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
-	.mode = MUSB_OTG,
-	.board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.name	= "usb-mem",
-		.flags	=  IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.name   = "mc", /* hard-coded in musb */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ux500_musb_device = {
-	.name = "musb-ux500",
-	.id = 0,
-	.dev = {
-		.platform_data = &musb_platform_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(usb_resources),
-	.resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
-		   int *dma_rx_cfg, int *dma_tx_cfg)
-{
-	ux500_musb_device.resource[0].start = base;
-	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-	ux500_musb_device.resource[1].start = irq;
-	ux500_musb_device.resource[1].end = irq;
-
-	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
-	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
-	ux500_musb_device.dev.parent = parent;
-
-	platform_device_register(&ux500_musb_device);
-}
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index ec087407b163..6f938ccb0c54 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -231,12 +231,14 @@
 /* PCI space */
 #define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
 #define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_IO_BASE          0x43000000
 #define VERSATILE_PCI_MEM_BASE0        0x44000000
 #define VERSATILE_PCI_MEM_BASE1        0x50000000
 #define VERSATILE_PCI_MEM_BASE2        0x60000000
 /* Sizes of above maps */
 #define VERSATILE_PCI_BASE_SIZE	       0x01000000
 #define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
 #define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
 #define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
 #define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e92e5e0705bc..c97be4ea76d2 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -43,9 +43,9 @@
 #define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
 #define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
 #define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
+#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
 #define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
 
 #define DEVICE_ID_OFFSET		0x00
@@ -170,8 +170,8 @@ static struct pci_ops pci_versatile_ops = {
 	.write	= versatile_write_config,
 };
 
-static struct resource io_mem = {
-	.name	= "PCI I/O space",
+static struct resource unused_mem = {
+	.name	= "PCI unused",
 	.start	= VERSATILE_PCI_MEM_BASE0,
 	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
 	.flags	= IORESOURCE_MEM,
@@ -195,9 +195,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 {
 	int ret = 0;
 
-	ret = request_resource(&iomem_resource, &io_mem);
+	ret = request_resource(&iomem_resource, &unused_mem);
 	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate I/O "
+		printk(KERN_ERR "PCI: unable to allocate unused "
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
@@ -205,7 +205,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
 		       "memory region (%d)\n", ret);
-		goto release_io_mem;
+		goto release_unused_mem;
 	}
 	ret = request_resource(&iomem_resource, &pre_mem);
 	if (ret) {
@@ -225,8 +225,8 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 
  release_non_mem:
 	release_resource(&non_mem);
- release_io_mem:
-	release_resource(&io_mem);
+ release_unused_mem:
+	release_resource(&unused_mem);
  out:
 	return ret;
 }
@@ -246,7 +246,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
 	if (ret)
 		goto out;
 
@@ -295,6 +295,19 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
 
 	/*
+	 * For many years the kernel and QEMU were symbiotically buggy
+	 * in that they both assumed the same broken IRQ mapping.
+	 * QEMU therefore attempts to auto-detect old broken kernels
+	 * so that they still work on newer QEMU as they did on old
+	 * QEMU. Since we now use the correct (ie matching-hardware)
+	 * IRQ mapping we write a definitely different value to a
+	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
+	 * real hardware behaviour and it need not be backwards
+	 * compatible for us. This write is harmless on real hardware.
+	 */
+	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
+
+	/*
 	 * Do not to map Versatile FPGA PCI device into memory space
 	 */
 	pci_slot_ignore |= (1 << myslot);
@@ -327,13 +340,13 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
-	/* slot,  pin,	irq
-	 *  24     1     IRQ_SIC_PCI0
-	 *  25     1     IRQ_SIC_PCI1
-	 *  26     1     IRQ_SIC_PCI2
-	 *  27     1     IRQ_SIC_PCI3
+	/*
+	 * Slot	INTA	INTB	INTC	INTD
+	 * 31	PCI1	PCI2	PCI3	PCI0
+	 * 30	PCI0	PCI1	PCI2	PCI3
+	 * 29	PCI3	PCI0	PCI1	PCI2
 	 */
-	irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
+	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
 
 	return irq;
 }
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index b8bbabec6310..4a70be485ff8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,17 +1,16 @@
 config ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select ICST
@@ -66,4 +65,24 @@ config ARCH_VEXPRESS_DCSCB
 	  This is needed to provide CPU and cluster power management
 	  on RTSM implementing big.LITTLE.
 
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
+config ARCH_VEXPRESS_TC2_PM
+	bool "Versatile Express TC2 power management"
+	depends on MCPM
+	select ARM_CCI
+	select ARCH_VEXPRESS_SPC
+	help
+	  Support for CPU and cluster power management on Versatile Express
+	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
 endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 48ba89a8149f..0997e0b7494c 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -7,5 +7,9 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
+CFLAGS_dcscb.o				+= -march=armv7-a
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
+CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 16d57a8a9d5a..14d499688736 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -133,17 +133,8 @@ static void dcscb_power_down(void)
 	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
 		arch_spin_unlock(&dcscb_lock);
 
-		/*
-		 * Flush all cache levels for this cluster.
-		 *
-		 * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
-		 * a preliminary flush here for those CPUs.  At least, that's
-		 * the theory -- without the extra flush, Linux explodes on
-		 * RTSM (to be investigated).
-		 */
-		flush_cache_all();
-		set_cr(get_cr() & ~CR_C);
-		flush_cache_all();
+		/* Flush all cache levels for this cluster. */
+		v7_exit_coherency_flush(all);
 
 		/*
 		 * This is a harmless no-op.  On platforms with a real
@@ -152,9 +143,6 @@ static void dcscb_power_down(void)
 		 */
 		outer_flush_all();
 
-		/* Disable local coherency by clearing the ACTLR "SMP" bit: */
-		set_auxcr(get_auxcr() & ~(1 << 6));
-
 		/*
 		 * Disable cluster-level coherency by masking
 		 * incoming snoops and DVM messages:
@@ -165,20 +153,8 @@ static void dcscb_power_down(void)
 	} else {
 		arch_spin_unlock(&dcscb_lock);
 
-		/*
-		 * Flush the local CPU cache.
-		 *
-		 * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
-		 * a preliminary flush here for those CPUs.  At least, that's
-		 * the theory -- without the extra flush, Linux explodes on
-		 * RTSM (to be investigated).
-		 */
-		flush_cache_louis();
-		set_cr(get_cr() & ~CR_C);
-		flush_cache_louis();
-
-		/* Disable local coherency by clearing the ACTLR "SMP" bit: */
-		set_auxcr(get_auxcr() & ~(1 << 6));
+		/* Disable and flush the local CPU cache. */
+		v7_exit_coherency_flush(louis);
 	}
 
 	__mcpm_cpu_down(cpu, cluster);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
new file mode 100644
index 000000000000..033d34dcbd3f
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.c
@@ -0,0 +1,544 @@
+/*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *          Achin Gupta           <achin.gupta@arm.com>
+ *          Lorenzo Pieralisi     <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/semaphore.h>
+
+#include <asm/cacheflush.h>
+
+#define SPCLOG "vexpress-spc: "
+
+#define PERF_LVL_A15		0x00
+#define PERF_REQ_A15		0x04
+#define PERF_LVL_A7		0x08
+#define PERF_REQ_A7		0x0c
+#define COMMS			0x10
+#define COMMS_REQ		0x14
+#define PWC_STATUS		0x18
+#define PWC_FLAG		0x1c
+
+/* SPC wake-up IRQs status and mask */
+#define WAKE_INT_MASK		0x24
+#define WAKE_INT_RAW		0x28
+#define WAKE_INT_STAT		0x2c
+/* SPC power down registers */
+#define A15_PWRDN_EN		0x30
+#define A7_PWRDN_EN		0x34
+/* SPC per-CPU mailboxes */
+#define A15_BX_ADDR0		0x68
+#define A7_BX_ADDR0		0x78
+
+/* SPC system config interface registers */
+#define SYSCFG_WDATA		0x70
+#define SYSCFG_RDATA		0x74
+
+/* A15/A7 OPP virtual register base */
+#define A15_PERFVAL_BASE	0xC10
+#define A7_PERFVAL_BASE		0xC30
+
+/* Config interface control bits */
+#define SYSCFG_START		(1 << 31)
+#define SYSCFG_SCC		(6 << 20)
+#define SYSCFG_STAT		(14 << 20)
+
+/* wake-up interrupt masks */
+#define GBL_WAKEUP_INT_MSK	(0x3 << 10)
+
+/* TC2 static dual-cluster configuration */
+#define MAX_CLUSTERS		2
+
+/*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+#define TIMEOUT_US	20000
+
+#define MAX_OPPS	8
+#define CA15_DVFS	0
+#define CA7_DVFS	1
+#define SPC_SYS_CFG	2
+#define STAT_COMPLETE(type)	((1 << 0) << (type << 2))
+#define STAT_ERR(type)		((1 << 1) << (type << 2))
+#define RESPONSE_MASK(type)	(STAT_COMPLETE(type) | STAT_ERR(type))
+
+struct ve_spc_opp {
+	unsigned long freq;
+	unsigned long u_volt;
+};
+
+struct ve_spc_drvdata {
+	void __iomem *baseaddr;
+	/*
+	 * A15s cluster identifier
+	 * It corresponds to A15 processors MPIDR[15:8] bitfield
+	 */
+	u32 a15_clusid;
+	uint32_t cur_rsp_mask;
+	uint32_t cur_rsp_stat;
+	struct semaphore sem;
+	struct completion done;
+	struct ve_spc_opp *opps[MAX_CLUSTERS];
+	int num_opps[MAX_CLUSTERS];
+};
+
+static struct ve_spc_drvdata *info;
+
+static inline bool cluster_is_a15(u32 cluster)
+{
+	return cluster == info->a15_clusid;
+}
+
+/**
+ * ve_spc_global_wakeup_irq()
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_global_wakeup_irq(bool set)
+{
+	u32 reg;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= GBL_WAKEUP_INT_MSK;
+	else
+		reg &= ~GBL_WAKEUP_INT_MSK;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_cpu_wakeup_irq()
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+{
+	u32 mask, reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	mask = 1 << cpu;
+
+	if (!cluster_is_a15(cluster))
+		mask <<= 4;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+{
+	void __iomem *baseaddr;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	if (cluster_is_a15(cluster))
+		baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+	else
+		baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+	writel_relaxed(addr, baseaddr);
+}
+
+/**
+ * ve_spc_powerdown()
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
+ */
+void ve_spc_powerdown(u32 cluster, bool enable)
+{
+	u32 pwdrn_reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+}
+
+static int ve_spc_get_performance(int cluster, u32 *freq)
+{
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 perf_cfg_reg = 0;
+	u32 perf;
+
+	perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+	perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+	if (perf >= info->num_opps[cluster])
+		return -EINVAL;
+
+	opps += perf;
+	*freq = opps->freq;
+
+	return 0;
+}
+
+/* find closest match to given frequency in OPP table */
+static int ve_spc_round_performance(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 fmin = 0, fmax = ~0, ftmp;
+
+	freq /= 1000; /* OPP entries in kHz */
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ftmp = opps->freq;
+		if (ftmp >= freq) {
+			if (ftmp <= fmax)
+				fmax = ftmp;
+		} else {
+			if (ftmp >= fmin)
+				fmin = ftmp;
+		}
+	}
+	if (fmax != ~0)
+		return fmax * 1000;
+	else
+		return fmin * 1000;
+}
+
+static int ve_spc_find_performance_index(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++)
+		if (opps->freq == freq)
+			break;
+	return (idx == max_opp) ? -EINVAL : idx;
+}
+
+static int ve_spc_waitforcompletion(int req_type)
+{
+	int ret = wait_for_completion_interruptible_timeout(
+			&info->done, usecs_to_jiffies(TIMEOUT_US));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+	else if (ret > 0)
+		ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+	return ret;
+}
+
+static int ve_spc_set_performance(int cluster, u32 freq)
+{
+	u32 perf_cfg_reg, perf_stat_reg;
+	int ret, perf, req_type;
+
+	if (cluster_is_a15(cluster)) {
+		req_type = CA15_DVFS;
+		perf_cfg_reg = PERF_LVL_A15;
+		perf_stat_reg = PERF_REQ_A15;
+	} else {
+		req_type = CA7_DVFS;
+		perf_cfg_reg = PERF_LVL_A7;
+		perf_stat_reg = PERF_REQ_A7;
+	}
+
+	perf = ve_spc_find_performance_index(cluster, freq);
+
+	if (perf < 0)
+		return perf;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+	writel(perf, info->baseaddr + perf_cfg_reg);
+	ret = ve_spc_waitforcompletion(req_type);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+{
+	int ret;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+	/* Set the control value */
+	writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+	ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+	if (ret == 0)
+		*data = readl(info->baseaddr + SYSCFG_RDATA);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+{
+	struct ve_spc_drvdata *drv_data = data;
+	uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+	if (info->cur_rsp_mask & status) {
+		info->cur_rsp_stat = status;
+		complete(&drv_data->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  +--------------------------+
+ *  | 31      20 | 19        0 |
+ *  +--------------------------+
+ *  |   u_volt   |  freq(kHz)  |
+ *  +--------------------------+
+ */
+#define MULT_FACTOR	20
+#define VOLT_SHIFT	20
+#define FREQ_MASK	(0xFFFFF)
+static int ve_spc_populate_opps(uint32_t cluster)
+{
+	uint32_t data = 0, off, ret, idx;
+	struct ve_spc_opp *opps;
+
+	opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL);
+	if (!opps)
+		return -ENOMEM;
+
+	info->opps[cluster] = opps;
+
+	off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+	for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+		if (!ret) {
+			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+			opps->u_volt = data >> VOLT_SHIFT;
+		} else {
+			break;
+		}
+	}
+	info->num_opps[cluster] = idx;
+
+	return ret;
+}
+
+static int ve_init_opp_table(struct device *cpu_dev)
+{
+	int cluster = topology_physical_package_id(cpu_dev->id);
+	int idx, ret = 0, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+				 opps->freq, opps->u_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+{
+	int ret;
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		pr_err(SPCLOG "unable to allocate mem\n");
+		return -ENOMEM;
+	}
+
+	info->baseaddr = baseaddr;
+	info->a15_clusid = a15_clusid;
+
+	if (irq <= 0) {
+		pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+		kfree(info);
+		return -EINVAL;
+	}
+
+	init_completion(&info->done);
+
+	readl_relaxed(info->baseaddr + PWC_STATUS);
+
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+				| IRQF_ONESHOT, "vexpress-spc", info);
+	if (ret) {
+		pr_err(SPCLOG "IRQ %d request failed\n", irq);
+		kfree(info);
+		return -ENODEV;
+	}
+
+	sema_init(&info->sem, 1);
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure driver info reaches main
+	 * memory.
+	 */
+	sync_cache_w(info);
+	sync_cache_w(&info);
+
+	return 0;
+}
+
+struct clk_spc {
+	struct clk_hw hw;
+	int cluster;
+};
+
+#define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
+static unsigned long spc_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+	u32 freq;
+
+	if (ve_spc_get_performance(spc->cluster, &freq))
+		return -EIO;
+
+	return freq * 1000;
+}
+
+static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_round_performance(spc->cluster, drate);
+}
+
+static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_set_performance(spc->cluster, rate / 1000);
+}
+
+static struct clk_ops clk_spc_ops = {
+	.recalc_rate = spc_recalc_rate,
+	.round_rate = spc_round_rate,
+	.set_rate = spc_set_rate,
+};
+
+static struct clk *ve_spc_clk_register(struct device *cpu_dev)
+{
+	struct clk_init_data init;
+	struct clk_spc *spc;
+
+	spc = kzalloc(sizeof(*spc), GFP_KERNEL);
+	if (!spc) {
+		pr_err("could not allocate spc clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	spc->hw.init = &init;
+	spc->cluster = topology_physical_package_id(cpu_dev->id);
+
+	init.name = dev_name(cpu_dev);
+	init.ops = &clk_spc_ops;
+	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.num_parents = 0;
+
+	return devm_clk_register(cpu_dev, &spc->hw);
+}
+
+static int __init ve_spc_clk_init(void)
+{
+	int cpu;
+	struct clk *clk;
+
+	if (!info)
+		return 0; /* Continue only if SPC is initialised */
+
+	if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
+		pr_err("failed to build OPP table\n");
+		return -ENODEV;
+	}
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_warn("failed to get cpu%d device\n", cpu);
+			continue;
+		}
+		clk = ve_spc_clk_register(cpu_dev);
+		if (IS_ERR(clk)) {
+			pr_warn("failed to register cpu%d clock\n", cpu);
+			continue;
+		}
+		if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
+			pr_warn("failed to register cpu%d clock lookup\n", cpu);
+			continue;
+		}
+
+		if (ve_init_opp_table(cpu_dev))
+			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+	}
+
+	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ve_spc_clk_init);
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
new file mode 100644
index 000000000000..dbd44c3720f9
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+
+#ifndef __SPC_H_
+#define __SPC_H_
+
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq);
+void ve_spc_global_wakeup_irq(bool set);
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
+void ve_spc_powerdown(u32 cluster, bool enable);
+
+#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
new file mode 100644
index 000000000000..05a364c5077a
--- /dev/null
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -0,0 +1,322 @@
+/*
+ * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
+ *
+ * Created by:	Nicolas Pitre, October 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Some portions of this file were originally written by Achin Gupta
+ * Copyright:   (C) 2012  ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+
+#include "spc.h"
+
+/* SCC conf registers */
+#define A15_CONF		0x400
+#define A7_CONF			0x500
+#define SYS_INFO		0x700
+#define SPC_BASE		0xb00
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+#define TC2_CLUSTERS			2
+#define TC2_MAX_CPUS_PER_CLUSTER	3
+
+static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
+
+/* Keep per-cpu usage count to cope with unordered up/down requests */
+static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
+
+#define tc2_cluster_unused(cluster) \
+	(!tc2_pm_use_count[0][cluster] && \
+	 !tc2_pm_use_count[1][cluster] && \
+	 !tc2_pm_use_count[2][cluster])
+
+static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
+		return -EINVAL;
+
+	/*
+	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+	 * variant exists, we need to disable IRQs manually here.
+	 */
+	local_irq_disable();
+	arch_spin_lock(&tc2_pm_lock);
+
+	if (tc2_cluster_unused(cluster))
+		ve_spc_powerdown(cluster, false);
+
+	tc2_pm_use_count[cpu][cluster]++;
+	if (tc2_pm_use_count[cpu][cluster] == 1) {
+		ve_spc_set_resume_addr(cluster, cpu,
+				       virt_to_phys(mcpm_entry_point));
+		ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+	} else if (tc2_pm_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&tc2_pm_lock);
+	local_irq_enable();
+
+	return 0;
+}
+
+static void tc2_pm_down(u64 residency)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&tc2_pm_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	tc2_pm_use_count[cpu][cluster]--;
+	if (tc2_pm_use_count[cpu][cluster] == 0) {
+		ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+		if (tc2_cluster_unused(cluster)) {
+			ve_spc_powerdown(cluster, true);
+			ve_spc_global_wakeup_irq(true);
+			last_man = true;
+		}
+	} else if (tc2_pm_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else
+		BUG();
+
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&tc2_pm_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3 \n\t"
+			"isb	\n\t"
+			"dsb	"
+			: : "r" (0x400) );
+		}
+
+		v7_exit_coherency_flush(all);
+
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	} else {
+		/*
+		 * If last man then undo any setup done previously.
+		 */
+		if (last_man) {
+			ve_spc_powerdown(cluster, false);
+			ve_spc_global_wakeup_irq(false);
+		}
+
+		arch_spin_unlock(&tc2_pm_lock);
+
+		v7_exit_coherency_flush(louis);
+	}
+
+	__mcpm_cpu_down(cpu, cluster);
+
+	/* Now we are prepared for power-down, do it: */
+	if (!skip_wfi)
+		wfi();
+
+	/* Not dead at this point?  Let our caller cope. */
+}
+
+static void tc2_pm_power_down(void)
+{
+	tc2_pm_down(0);
+}
+
+static void tc2_pm_suspend(u64 residency)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+	tc2_pm_down(residency);
+}
+
+static void tc2_pm_powered_up(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	unsigned long flags;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	local_irq_save(flags);
+	arch_spin_lock(&tc2_pm_lock);
+
+	if (tc2_cluster_unused(cluster)) {
+		ve_spc_powerdown(cluster, false);
+		ve_spc_global_wakeup_irq(false);
+	}
+
+	if (!tc2_pm_use_count[cpu][cluster])
+		tc2_pm_use_count[cpu][cluster] = 1;
+
+	ve_spc_cpu_wakeup_irq(cluster, cpu, false);
+	ve_spc_set_resume_addr(cluster, cpu, 0);
+
+	arch_spin_unlock(&tc2_pm_lock);
+	local_irq_restore(flags);
+}
+
+static const struct mcpm_platform_ops tc2_pm_power_ops = {
+	.power_up	= tc2_pm_power_up,
+	.power_down	= tc2_pm_power_down,
+	.suspend	= tc2_pm_suspend,
+	.powered_up	= tc2_pm_powered_up,
+};
+
+static bool __init tc2_pm_usage_count_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
+		pr_err("%s: boot CPU is out of bound!\n", __func__);
+		return false;
+	}
+	tc2_pm_use_count[cpu][cluster] = 1;
+	return true;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile (" \n"
+"	cmp	r0, #1 \n"
+"	bxne	lr \n"
+"	b	cci_enable_port_for_self ");
+}
+
+static int __init tc2_pm_init(void)
+{
+	int ret, irq;
+	void __iomem *scc;
+	u32 a15_cluster_id, a7_cluster_id, sys_info;
+	struct device_node *np;
+
+	/*
+	 * The power management-related features are hidden behind
+	 * SCC registers. We need to extract runtime information like
+	 * cluster ids and number of CPUs really available in clusters.
+	 */
+	np = of_find_compatible_node(NULL, NULL,
+			"arm,vexpress-scc,v2p-ca15_a7");
+	scc = of_iomap(np, 0);
+	if (!scc)
+		return -ENODEV;
+
+	a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
+	a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
+	if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
+		return -EINVAL;
+
+	sys_info = readl_relaxed(scc + SYS_INFO);
+	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
+	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
+
+	irq = irq_of_parse_and_map(np, 0);
+
+	/*
+	 * A subset of the SCC registers is also used to communicate
+	 * with the SPC (power controller). We need to be able to
+	 * drive it very early in the boot process to power up
+	 * processors, so we initialize the SPC driver here.
+	 */
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
+	if (ret)
+		return ret;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	if (!tc2_pm_usage_count_init())
+		return -EINVAL;
+
+	ret = mcpm_platform_register(&tc2_pm_power_ops);
+	if (!ret) {
+		mcpm_sync_init(tc2_pm_power_up_setup);
+		pr_info("TC2 power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(tc2_pm_init);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 95a469e23e37..4f8b8cb17ff5 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,12 +1,10 @@
 /*
  * Versatile Express V2M Motherboard Support
  */
-#include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -22,7 +20,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/vexpress.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -422,16 +419,8 @@ void __init v2m_dt_init_early(void)
 			pr_warning("vexpress: DT HBI (%x) is not matching "
 					"hardware (%x)!\n", dt_hbi, hbi);
 	}
-}
-
-static void __init v2m_dt_timer_init(void)
-{
-	of_clk_init(NULL);
 
-	clocksource_of_init();
-
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
-				24000000);
+	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
 }
 
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
@@ -458,6 +447,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
-	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 9b252934b206..927be93b692e 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -5,7 +5,6 @@ config ARCH_VT8500
 	select CLKDEV_LOOKUP
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select VT8500_TIMER
 	select PINCTRL
 	help
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
deleted file mode 100644
index 087787af62f1..000000000000
--- a/arch/arm/mach-vt8500/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-vt8500/dt_common.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-
-#include <linux/of.h>
-
-/* defined in drivers/clk/clk-vt8500.c */
-void __init vtwm_clk_init(void __iomem *pmc_base);
-
-#endif
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index eefaa60d6614..4a73464cb11b 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -33,8 +32,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include "common.h"
-
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
 
@@ -162,8 +159,6 @@ void __init vt8500_init(void)
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
-	vtwm_clk_init(pmc_base);
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -180,7 +175,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_machine	= vt8500_init,
-	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
deleted file mode 100644
index 5385a4203277..000000000000
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-w90p910/include/mach/gpio.h
- *
- * Generic w90p910 GPIO handling
- *
- *  Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_W90P910_GPIO_H
-#define __ASM_ARCH_W90P910_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-#define gpio_to_irq gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index c1d61f281e68..6b04260aa142 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -6,12 +6,13 @@ config ARCH_ZYNQ
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select HAVE_SMP
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
+	select ARM_GLOBAL_TIMER
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5f252569c689..9a7bd137c8fd 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -44,6 +44,10 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = {
 	{}
 };
 
+static struct platform_device zynq_cpuidle_device = {
+	.name = "cpuidle-zynq",
+};
+
 /**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
@@ -56,6 +60,8 @@ static void __init zynq_init_machine(void)
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
 	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+
+	platform_device_register(&zynq_cpuidle_device);
 }
 
 static void __init zynq_timer_init(void)
diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c
index c89672bd1de2..5052c70326e4 100644
--- a/arch/arm/mach-zynq/hotplug.c
+++ b/arch/arm/mach-zynq/hotplug.c
@@ -40,44 +40,6 @@ static inline void zynq_cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void zynq_cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x40\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		dsb();
-		wfi();
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -85,20 +47,13 @@ static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious)
  */
 void zynq_platform_cpu_die(unsigned int cpu)
 {
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
 	zynq_cpu_enter_lowpower();
-	zynq_platform_do_lowpower(cpu, &spurious);
 
 	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
 	 */
-	zynq_cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+	for (;;)
+		cpu_do_idle();
 }
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 50d008d8f87f..1836d5a34606 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -14,32 +14,21 @@
  * 02139, USA.
  */
 
-#include <linux/export.h>
 #include <linux/io.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/uaccess.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/clk/zynq.h>
 #include "common.h"
 
-#define SLCR_UNLOCK_MAGIC		0xDF0D
-#define SLCR_UNLOCK			0x8   /* SCLR unlock register */
-
+/* register offsets */
+#define SLCR_UNLOCK_OFFSET		0x8   /* SCLR unlock register */
 #define SLCR_PS_RST_CTRL_OFFSET		0x200 /* PS Software Reset Control */
+#define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
+#define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
 
+#define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
 
-#define SLCR_A9_CPU_RST_CTRL		0x244 /* CPU Software Reset Control */
-#define SLCR_REBOOT_STATUS		0x258 /* PS Reboot Status */
-
 void __iomem *zynq_slcr_base;
 
 /**
@@ -54,15 +43,15 @@ void zynq_slcr_system_reset(void)
 	 * Note that this seems to require raw i/o
 	 * functions or there's a lockup?
 	 */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
 
 	/*
 	 * Clear 0x0F000000 bits of reboot status register to workaround
 	 * the FSBL not loading the bitstream after soft-reboot
 	 * This is a temporary solution until we know more.
 	 */
-	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS);
-	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS);
+	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
+	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
 	writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
 }
 
@@ -72,11 +61,11 @@ void zynq_slcr_system_reset(void)
  */
 void zynq_slcr_cpu_start(int cpu)
 {
-	/* enable CPUn */
-	writel(SLCR_A9_CPU_CLKSTOP << cpu,
-	       zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
-	/* enable CLK for CPUn */
-	writel(0x0 << cpu, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg &= ~(SLCR_A9_CPU_RST << cpu);
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -85,9 +74,9 @@ void zynq_slcr_cpu_start(int cpu)
  */
 void zynq_slcr_cpu_stop(int cpu)
 {
-	/* stop CLK and reset CPUn */
-	writel((SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu,
-	       zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -113,7 +102,7 @@ int __init zynq_slcr_init(void)
 	}
 
 	/* unlock the SLCR so that registers can be changed */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cd2c88e7a8f7..1f8fed94c2a4 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -952,3 +952,9 @@ config ARCH_HAS_BARRIERS
 	help
 	  This option allows the use of custom mandatory barriers
 	  included via the mach/barriers.h file.
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	help
+	  This option specifies the architecture can support big endian
+	  operation.
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 80741992a9fc..3815a8262af0 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -38,9 +38,8 @@ ENTRY(v6_early_abort)
 	bne	do_DataAbort
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
 	ldr	r3, [r4]			@ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r3, r3
-#endif
+ ARM_BE8(rev	r3, r3)
+
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f4585b89078..924036473b16 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/system_info.h>
 #include <asm/unaligned.h>
+#include <asm/opcodes.h>
 
 #include "fault.h"
 
@@ -762,21 +763,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
 		fault = probe_kernel_address(ptr, tinstr);
+		tinstr = __mem_to_opcode_thumb16(tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
 				u16 tinst2 = 0;
 				fault = probe_kernel_address(ptr + 1, tinst2);
-				instr = (tinstr << 16) | tinst2;
+				tinst2 = __mem_to_opcode_thumb16(tinst2);
+				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
 				isize = 2;
 				instr = thumb2arm(tinstr);
 			}
 		}
-	} else
+	} else {
 		fault = probe_kernel_address(instrptr, instr);
+		instr = __mem_to_opcode_arm(instr);
+	}
 
 	if (fault) {
 		type = TYPE_FAULT;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index f5e1a8471714..79f8b39801a8 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -159,7 +159,7 @@ EXPORT_SYMBOL(arm_coherent_dma_ops);
 
 static u64 get_coherent_dma_mask(struct device *dev)
 {
-	u64 mask = (u64)arm_dma_limit;
+	u64 mask = (u64)DMA_BIT_MASK(32);
 
 	if (dev) {
 		mask = dev->coherent_dma_mask;
@@ -173,10 +173,30 @@ static u64 get_coherent_dma_mask(struct device *dev)
 			return 0;
 		}
 
-		if ((~mask) & (u64)arm_dma_limit) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (u64)arm_dma_limit);
+		/*
+		 * If the mask allows for more memory than we can address,
+		 * and we actually have that much memory, then fail the
+		 * allocation.
+		 */
+		if (sizeof(mask) != sizeof(dma_addr_t) &&
+		    mask > (dma_addr_t)~0 &&
+		    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
+			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+				 mask);
+			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+			return 0;
+		}
+
+		/*
+		 * Now check that the mask, when translated to a PFN,
+		 * fits within the allowable addresses which we can
+		 * allocate.
+		 */
+		if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
+			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+				 mask,
+				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+				 arm_dma_pfn_limit + 1);
 			return 0;
 		}
 	}
@@ -687,7 +707,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 		    gfp_t gfp, struct dma_attrs *attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	void *memory;
 
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
@@ -700,7 +720,7 @@ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
 	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	void *memory;
 
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
@@ -1007,8 +1027,27 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
  */
 int dma_supported(struct device *dev, u64 mask)
 {
-	if (mask < (u64)arm_dma_limit)
+	unsigned long limit;
+
+	/*
+	 * If the mask allows for more memory than we can address,
+	 * and we actually have that much memory, then we must
+	 * indicate that DMA to this device is not supported.
+	 */
+	if (sizeof(mask) != sizeof(dma_addr_t) &&
+	    mask > (dma_addr_t)~0 &&
+	    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
+		return 0;
+
+	/*
+	 * Translate the device's DMA mask to a PFN limit.  This
+	 * PFN number includes the page which we can DMA to.
+	 */
+	limit = dma_to_pfn(dev, mask);
+
+	if (limit < arm_dma_pfn_limit)
 		return 0;
+
 	return 1;
 }
 EXPORT_SYMBOL(dma_supported);
@@ -1232,7 +1271,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
 				break;
 
 		len = (j - i) << PAGE_SHIFT;
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		ret = iommu_map(mapping->domain, iova, phys, len,
+				IOMMU_READ|IOMMU_WRITE);
 		if (ret < 0)
 			goto fail;
 		iova += len;
@@ -1431,6 +1471,27 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
 					 GFP_KERNEL);
 }
 
+static int __dma_direction_to_prot(enum dma_data_direction dir)
+{
+	int prot;
+
+	switch (dir) {
+	case DMA_BIDIRECTIONAL:
+		prot = IOMMU_READ | IOMMU_WRITE;
+		break;
+	case DMA_TO_DEVICE:
+		prot = IOMMU_READ;
+		break;
+	case DMA_FROM_DEVICE:
+		prot = IOMMU_WRITE;
+		break;
+	default:
+		prot = 0;
+	}
+
+	return prot;
+}
+
 /*
  * Map a part of the scatter-gather list into contiguous io address space
  */
@@ -1444,6 +1505,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 	int ret = 0;
 	unsigned int count;
 	struct scatterlist *s;
+	int prot;
 
 	size = PAGE_ALIGN(size);
 	*handle = DMA_ERROR_CODE;
@@ -1460,7 +1522,9 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		prot = __dma_direction_to_prot(dir);
+
+		ret = iommu_map(mapping->domain, iova, phys, len, prot);
 		if (ret < 0)
 			goto fail;
 		count += len >> PAGE_SHIFT;
@@ -1665,19 +1729,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p
 	if (dma_addr == DMA_ERROR_CODE)
 		return dma_addr;
 
-	switch (dir) {
-	case DMA_BIDIRECTIONAL:
-		prot = IOMMU_READ | IOMMU_WRITE;
-		break;
-	case DMA_TO_DEVICE:
-		prot = IOMMU_READ;
-		break;
-	case DMA_FROM_DEVICE:
-		prot = IOMMU_WRITE;
-		break;
-	default:
-		prot = 0;
-	}
+	prot = __dma_direction_to_prot(dir);
 
 	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
 	if (ret < 0)
diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c
index 9d285626bc7d..312e15e6d00b 100644
--- a/arch/arm/mm/extable.c
+++ b/arch/arm/mm/extable.c
@@ -9,8 +9,13 @@ int fixup_exception(struct pt_regs *regs)
 	const struct exception_table_entry *fixup;
 
 	fixup = search_exception_tables(instruction_pointer(regs));
-	if (fixup)
+	if (fixup) {
 		regs->ARM_pc = fixup->fixup;
+#ifdef CONFIG_THUMB2_KERNEL
+		/* Clear the IT state to avoid nasty surprises in the fixup */
+		regs->ARM_cpsr &= ~PSR_IT_MASK;
+#endif
+	}
 
 	return fixup != NULL;
 }
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 2a5907b5c8d2..ff379ac115df 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -65,7 +65,7 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	return ret;
 }
 
-#if USE_SPLIT_PTLOCKS
+#if USE_SPLIT_PTE_PTLOCKS
 /*
  * If we are using split PTE locks, then we need to take the page
  * lock here.  Otherwise we are using shared mm->page_table_lock
@@ -84,10 +84,10 @@ static inline void do_pte_unlock(spinlock_t *ptl)
 {
 	spin_unlock(ptl);
 }
-#else /* !USE_SPLIT_PTLOCKS */
+#else /* !USE_SPLIT_PTE_PTLOCKS */
 static inline void do_pte_lock(spinlock_t *ptl) {}
 static inline void do_pte_unlock(spinlock_t *ptl) {}
-#endif /* USE_SPLIT_PTLOCKS */
+#endif /* USE_SPLIT_PTE_PTLOCKS */
 
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	unsigned long pfn)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index c97f7940cb95..eb8830a4c5ed 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -261,9 +261,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
-	int write = fsr & FSR_WRITE;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				(write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (notify_page_fault(regs, fsr))
 		return 0;
@@ -282,6 +280,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (fsr & FSR_WRITE)
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * As per x86, we may deadlock here.  However, since the kernel only
 	 * validly references user space from well defined areas of the code,
@@ -349,6 +352,13 @@ retry:
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	/*
+	 * If we are in kernel mode at this point, we
+	 * have no context to handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
 	if (fault & VM_FAULT_OOM) {
 		/*
 		 * We ran out of memory, call the OOM killer, and return to
@@ -359,13 +369,6 @@ retry:
 		return 0;
 	}
 
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c
index 66781bf34077..54ee6163c181 100644
--- a/arch/arm/mm/hugetlbpage.c
+++ b/arch/arm/mm/hugetlbpage.c
@@ -56,3 +56,8 @@ int pmd_huge(pmd_t pmd)
 {
 	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
 }
+
+int pmd_huge_support(void)
+{
+	return 1;
+}
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 83cb3ac27095..8e0e52eb76b5 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -10,6 +10,7 @@
 #include <asm/system_info.h>
 
 pgd_t *idmap_pgd;
+phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
@@ -67,8 +68,9 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 	unsigned long addr, end;
 	unsigned long next;
 
-	addr = virt_to_phys(text_start);
-	end = virt_to_phys(text_end);
+	addr = virt_to_idmap(text_start);
+	end = virt_to_idmap(text_end);
+	pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end);
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
@@ -90,8 +92,6 @@ static int __init init_static_idmap(void)
 	if (!idmap_pgd)
 		return -ENOMEM;
 
-	pr_info("Setting up static identity map for 0x%p - 0x%p\n",
-		__idmap_text_start, __idmap_text_end);
 	identity_mapping_add(idmap_pgd, __idmap_text_start,
 			     __idmap_text_end, 0);
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2958e74fc42c..3e8f106ee5fe 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -76,14 +76,6 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end)
-{
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
-}
-#endif /* CONFIG_OF_FLATTREE */
-
 /*
  * This keeps memory configuration data used by a couple memory
  * initialization functions, as well as show_mem() for the skipping
@@ -207,7 +199,7 @@ static void __init arm_bootmem_init(unsigned long start_pfn,
 
 #ifdef CONFIG_ZONE_DMA
 
-unsigned long arm_dma_zone_size __read_mostly;
+phys_addr_t arm_dma_zone_size __read_mostly;
 EXPORT_SYMBOL(arm_dma_zone_size);
 
 /*
@@ -217,6 +209,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);
  * so a successful GFP_DMA allocation will always satisfy this.
  */
 phys_addr_t arm_dma_limit;
+unsigned long arm_dma_pfn_limit;
 
 static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 	unsigned long dma_size)
@@ -239,6 +232,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
 	} else
 		arm_dma_limit = 0xffffffff;
+	arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;
 #endif
 }
 
@@ -350,6 +344,11 @@ void __init arm_memblock_init(struct meminfo *mi,
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
+	/* FDT scan will populate initrd_start */
+	if (initrd_start) {
+		phys_initrd_start = __virt_to_phys(initrd_start);
+		phys_initrd_size = initrd_end - initrd_start;
+	}
 	if (phys_initrd_size &&
 	    !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
 		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",
@@ -421,12 +420,10 @@ void __init bootmem_init(void)
 	 * This doesn't seem to be used by the Linux memory manager any
 	 * more, but is used by ll_rw_block.  If we can get rid of it, we
 	 * also get rid of some of the stuff above as well.
-	 *
-	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
-	 * the system, not the maximum PFN.
 	 */
-	max_low_pfn = max_low - PHYS_PFN_OFFSET;
-	max_pfn = max_high - PHYS_PFN_OFFSET;
+	min_low_pfn = min;
+	max_low_pfn = max_low;
+	max_pfn = max_high;
 }
 
 /*
@@ -532,7 +529,7 @@ static inline void free_area_high(unsigned long pfn, unsigned long end)
 static void __init free_highpages(void)
 {
 #ifdef CONFIG_HIGHMEM
-	unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
+	unsigned long max_low = max_low_pfn;
 	struct memblock_region *mem, *res;
 
 	/* set highmem page free */
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index d5a4e9ad8f0f..d5a982d15a88 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -81,8 +81,10 @@ extern __init void add_static_vm_early(struct static_vm *svm);
 
 #ifdef CONFIG_ZONE_DMA
 extern phys_addr_t arm_dma_limit;
+extern unsigned long arm_dma_pfn_limit;
 #else
 #define arm_dma_limit ((phys_addr_t)~0)
+#define arm_dma_pfn_limit (~0ul >> PAGE_SHIFT)
 #endif
 
 extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 0c6356255fe3..d27158c38eb0 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -202,13 +202,11 @@ int valid_phys_addr_range(phys_addr_t addr, size_t size)
 }
 
 /*
- * We don't use supersection mappings for mmap() on /dev/mem, which
- * means that we can't map the memory area above the 4G barrier into
- * userspace.
+ * Do not allow /dev/mem mappings beyond the supported physical range.
  */
 int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
-	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
+	return (pfn + (size >> PAGE_SHIFT)) <= (1 + (PHYS_MASK >> PAGE_SHIFT));
 }
 
 #ifdef CONFIG_STRICT_DEVMEM
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b1d17eeb59b8..78eeeca78f5a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -28,6 +28,8 @@
 #include <asm/highmem.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
+#include <asm/procinfo.h>
+#include <asm/memory.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -1315,6 +1317,86 @@ static void __init map_lowmem(void)
 	}
 }
 
+#ifdef CONFIG_ARM_LPAE
+/*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags;
+	unsigned long map_start, map_end;
+	pgd_t *pgd0, *pgdk;
+	pud_t *pud0, *pudk, *pud_start;
+	pmd_t *pmd0, *pmdk;
+	phys_addr_t phys;
+	int i;
+
+	if (!(mdesc->init_meminfo))
+		return;
+
+	/* remap kernel code and data */
+	map_start = init_mm.start_code;
+	map_end   = init_mm.brk;
+
+	/* get a handle on things... */
+	pgd0 = pgd_offset_k(0);
+	pud_start = pud0 = pud_offset(pgd0, 0);
+	pmd0 = pmd_offset(pud0, 0);
+
+	pgdk = pgd_offset_k(map_start);
+	pudk = pud_offset(pgdk, map_start);
+	pmdk = pmd_offset(pudk, map_start);
+
+	mdesc->init_meminfo();
+
+	/* Run the patch stub to update the constants */
+	fixup_pv_table(&__pv_table_begin,
+		(&__pv_table_end - &__pv_table_begin) << 2);
+
+	/*
+	 * Cache cleaning operations for self-modifying code
+	 * We should clean the entries by MVA but running a
+	 * for loop over every pv_table entry pointer would
+	 * just complicate the code.
+	 */
+	flush_cache_louis();
+	dsb();
+	isb();
+
+	/* remap level 1 table */
+	for (i = 0; i < PTRS_PER_PGD; pud0++, i++) {
+		set_pud(pud0,
+			__pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
+		pmd0 += PTRS_PER_PMD;
+	}
+
+	/* remap pmds for kernel mapping */
+	phys = __pa(map_start) & PMD_MASK;
+	do {
+		*pmdk++ = __pmd(phys | pmdprot);
+		phys += PMD_SIZE;
+	} while (phys < map_end);
+
+	flush_cache_all();
+	cpu_switch_mm(pgd0, &init_mm);
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_bp_all();
+	local_flush_tlb_all();
+}
+
+#else
+
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	if (mdesc->init_meminfo)
+		mdesc->init_meminfo();
+}
+
+#endif
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 34d4ab217bab..5c668b7a31f9 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -296,6 +296,15 @@ void __init sanity_check_meminfo(void)
 }
 
 /*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+}
+
+/*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 1128064fddcb..45dc29f85d56 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -220,9 +220,7 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c63d9bdee51e..60920f62fdf5 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -367,9 +367,7 @@ __v7_setup:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 #ifdef CONFIG_SWP_EMULATE
 	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
 	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index f50d223a0bd3..9ed155ad0f97 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -19,6 +19,7 @@
 #include <linux/if_vlan.h>
 #include <asm/cacheflush.h>
 #include <asm/hwcap.h>
+#include <asm/opcodes.h>
 
 #include "bpf_jit_32.h"
 
@@ -113,8 +114,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor)
 
 static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
 {
+	inst |= (cond << 28);
+	inst = __opcode_to_mem_arm(inst);
+
 	if (ctx->target != NULL)
-		ctx->target[ctx->idx] = inst | (cond << 28);
+		ctx->target[ctx->idx] = inst;
 
 	ctx->idx++;
 }
@@ -930,4 +934,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index a99dc15a70f7..224e56c6049b 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -5,7 +5,6 @@
 obj-y :=
 
 # IOP32X
-obj-$(CONFIG_ARCH_IOP32X) += gpio.o
 obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
 obj-$(CONFIG_ARCH_IOP32X) += setup.o
@@ -16,7 +15,6 @@ obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 obj-$(CONFIG_ARCH_IOP32X) += restart.o
 
 # IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += gpio.o
 obj-$(CONFIG_ARCH_IOP33X) += i2c.o
 obj-$(CONFIG_ARCH_IOP33X) += pci.o
 obj-$(CONFIG_ARCH_IOP33X) += setup.o
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
deleted file mode 100644
index 697de6dc4936..000000000000
--- a/arch/arm/plat-iop/gpio.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/plat-iop/gpio.c
- * GPIO handling for Intel IOP3xx processors.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/gpio.h>
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_IN) {
-		*IOP3XX_GPOE |= 1 << line;
-	} else if (direction == GPIO_OUT) {
-		*IOP3XX_GPOE &= ~(1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-int gpio_line_get(int line)
-{
-	return !!(*IOP3XX_GPID & (1 << line));
-}
-EXPORT_SYMBOL(gpio_line_get);
-
-void gpio_line_set(int line, int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value == GPIO_LOW) {
-		*IOP3XX_GPOD &= ~(1 << line);
-	} else if (value == GPIO_HIGH) {
-		*IOP3XX_GPOD |= 1 << line;
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_set);
-
-static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, GPIO_IN);
-	return 0;
-}
-
-static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, GPIO_OUT);
-	return 0;
-}
-
-static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return gpio_line_get(gpio);
-}
-
-static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip iop3xx_chip = {
-	.label			= "iop3xx",
-	.direction_input	= iop3xx_gpio_direction_input,
-	.get			= iop3xx_gpio_get_value,
-	.direction_output	= iop3xx_gpio_direction_output,
-	.set			= iop3xx_gpio_set_value,
-	.base			= 0,
-	.ngpio			= IOP3XX_N_GPIOS,
-};
-
-static int __init iop3xx_gpio_setup(void)
-{
-	return gpiochip_add(&iop3xx_chip);
-}
-arch_initcall(iop3xx_gpio_setup);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f82bae2171eb..436ea97074cd 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,7 +106,7 @@ config OMAP_32K_TIMER
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
+	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
 
 	  On OMAP2PLUS this value is only used for CONFIG_HZ and
 	  CLOCK_TICK_RATE compile time calculation.
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 4d463ca6821f..01619c2910e3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1965,7 +1965,6 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 static struct irqaction omap24xx_dma_irq = {
 	.name = "DMA",
 	.handler = omap2_dma_irq_handler,
-	.flags = IRQF_DISABLED
 };
 
 #else
@@ -2083,6 +2082,7 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 		dma_irq = platform_get_irq_byname(pdev, irq_name);
 		if (dma_irq < 0) {
 			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+			ret = dma_irq;
 			goto exit_dma_lch_fail;
 		}
 		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 8db0b981ca64..c492e1b3dfdb 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -47,7 +47,7 @@ static int __init orion_add_irq_domain(struct device_node *np,
 	do {
 		base = of_iomap(np, i);
 		if (base) {
-			orion_irq_init(i * 32, base);
+			orion_irq_init(i * 32, base + 0x04);
 			i++;
 		}
 	} while (base);
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c83f27b6bdda..3ea02903d75a 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -132,6 +132,7 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 	if (dev->of_node) {
 		struct of_phandle_args dma_spec;
 		struct device_node *np = dev->of_node;
+		int ret;
 
 		/*
 		 * FIXME: we should allocate the DMA channel from this
@@ -140,14 +141,23 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 		 */
 
 		/* rx */
-		of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-					   0, &dma_spec);
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 0, &dma_spec);
+
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
 		ssp->drcmr_rx = dma_spec.args[0];
 		of_node_put(dma_spec.np);
 
 		/* tx */
-		of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-					   1, &dma_spec);
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 1, &dma_spec);
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
 		ssp->drcmr_tx = dma_spec.args[0];
 		of_node_put(dma_spec.np);
 	} else {
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a5b5ff6e68d2..6d95d60276d6 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -25,7 +25,6 @@ config PLAT_S5P
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_CLKSRC if !COMMON_CLK
 	select SAMSUNG_GPIOLIB_4BIT
-	select SAMSUNG_IRQ_VIC_TIMER
 	help
 	  Base platform code for Samsung's S5P series SoC.
 
@@ -79,14 +78,6 @@ config SAMSUNG_ATAGS
 
 if SAMSUNG_ATAGS
 
-# timer options
-
-config SAMSUNG_HRT
-	bool
-	select SAMSUNG_DEV_PWM
-	help
-	  Use the High Resolution timer support
-
 # clock options
 
 config SAMSUNG_CLOCK
@@ -106,11 +97,6 @@ config S5P_CLOCK
 
 # options for IRQ support
 
-config SAMSUNG_IRQ_VIC_TIMER
-       bool
-       help
-         Internal configuration to build the VIC timer interrupt code.
-
 config S5P_IRQ
 	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
 	help
@@ -396,11 +382,6 @@ config S5P_DEV_TV
 	help
 	  Compile in platform device definition for TV interface
 
-config S5P_DEV_USB_EHCI
-	bool
-	help
-	  Compile in platform device definition for USB EHCI
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -409,11 +390,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 199bbe304d02..9267d29549b4 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,15 +12,12 @@ obj-				:=
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o cpu.o
-obj-$(CONFIG_SAMSUNG_HRT) 	+= samsung-time.o
 
 obj-$(CONFIG_SAMSUNG_CLOCK)	+= clock.o
-obj-$(CONFIG_SAMSUNG_CLOCK)	+= pwm-clock.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 obj-$(CONFIG_S5P_CLOCK)		+= s5p-clock.o
 
-obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
 obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
@@ -41,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index 5f197dcaf10c..d51f9565567c 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -20,13 +20,18 @@
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 
+struct samsung_bl_drvdata {
+	struct platform_pwm_backlight_data plat_data;
+	struct samsung_bl_gpio_info *gpio_info;
+};
+
 static int samsung_bl_init(struct device *dev)
 {
 	int ret = 0;
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
 
 	ret = gpio_request(bl_gpio_info->no, "Backlight");
 	if (ret) {
@@ -42,10 +47,10 @@ static int samsung_bl_init(struct device *dev)
 
 static void samsung_bl_exit(struct device *dev)
 {
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
 
 	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
 	gpio_free(bl_gpio_info->no);
@@ -60,12 +65,14 @@ static void samsung_bl_exit(struct device *dev)
  * for their specific boards
  */
 
-static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns  = 78770,
-	.init           = samsung_bl_init,
-	.exit           = samsung_bl_exit,
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+	.plat_data = {
+		.max_brightness = 255,
+		.dft_brightness = 255,
+		.pwm_period_ns  = 78770,
+		.init           = samsung_bl_init,
+		.exit           = samsung_bl_exit,
+	},
 };
 
 static struct platform_device samsung_dfl_bl_device __initdata = {
@@ -82,6 +89,7 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 {
 	int ret = 0;
 	struct platform_device *samsung_bl_device;
+	struct samsung_bl_drvdata *samsung_bl_drvdata;
 	struct platform_pwm_backlight_data *samsung_bl_data;
 
 	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
@@ -91,17 +99,19 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		return;
 	}
 
-	samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
-		sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
-	if (!samsung_bl_data) {
+	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+	if (!samsung_bl_drvdata) {
 		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
 		goto err_data;
 	}
+	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+	samsung_bl_drvdata->gpio_info = gpio_info;
+	samsung_bl_data = &samsung_bl_drvdata->plat_data;
 
 	/* Copy board specific data provided by user */
 	samsung_bl_data->pwm_id = bl_data->pwm_id;
-	samsung_bl_device->dev.parent =
-			&s3c_device_timer[samsung_bl_data->pwm_id].dev;
+	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
 
 	if (bl_data->max_brightness)
 		samsung_bl_data->max_brightness = bl_data->max_brightness;
@@ -122,17 +132,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	if (bl_data->check_fb)
 		samsung_bl_data->check_fb = bl_data->check_fb;
 
-	/* Keep the GPIO info for future use */
-	s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
-
-	/* Register the specific PWM timer dev for Backlight control */
-	ret = platform_device_register(
-			&s3c_device_timer[samsung_bl_data->pwm_id]);
-	if (ret) {
-		printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
-		goto err_plat_reg1;
-	}
-
 	/* Register the Backlight dev */
 	ret = platform_device_register(samsung_bl_device);
 	if (ret) {
@@ -143,8 +142,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	return;
 
 err_plat_reg2:
-	platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
-err_plat_reg1:
 	kfree(samsung_bl_data);
 err_data:
 	kfree(samsung_bl_device);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 0f9c3f431a5f..99a3590f0349 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <media/s5p_hdmi.h>
 
@@ -49,7 +50,6 @@
 #include <plat/devs.h>
 #include <plat/adc.h>
 #include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
 #include <plat/hdmi.h>
@@ -58,6 +58,7 @@
 #include <plat/keypad.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <plat/pwm-core.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
@@ -1097,36 +1098,21 @@ arch_initcall(s5p_pmu_init);
 /* PWM Timer */
 
 #ifdef CONFIG_SAMSUNG_DEV_PWM
+static struct resource samsung_pwm_resource[] = {
+	DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
+};
 
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+struct platform_device samsung_device_pwm = {
+	.name		= "samsung-pwm",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_pwm_resource),
+	.resource	= samsung_pwm_resource,
 };
+
+void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
+{
+	samsung_device_pwm.dev.platform_data = pd;
+}
 #endif /* CONFIG_SAMSUNG_DEV_PWM */
 
 /* RTC */
@@ -1373,39 +1359,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
 }
 #endif /* CONFIG_PLAT_S3C24XX */
 
-/* USB EHCI Host Controller */
-
-#ifdef CONFIG_S5P_DEV_USB_EHCI
-static struct resource s5p_ehci_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S5P_DEV_USB_EHCI */
-
 /* USB HSOTG */
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1513,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C24XX_DMAC)
+	pd.filter = s3c24xx_dma_filter;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index df45d6edc98d..63239f409807 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -145,10 +145,6 @@ extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
 
 extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
 
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
 /* Global watchdog clock used by arch_wtd_reset() callback */
 
 extern struct clk *s3c2410_wdtclk;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4fb1f03a10d1..335beb341355 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -87,8 +87,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400()	is_samsung_s3c6400()
+# define soc_is_s3c6410()	is_samsung_s3c6410()
 # define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
+# define soc_is_s3c6400()	0
+# define soc_is_s3c6410()	0
 # define soc_is_s3c64xx()	0
 #endif
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 87d501ff3328..eece188ed188 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -75,7 +75,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5p_device_ehci;
 extern struct platform_device s5p_device_fimc0;
 extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
@@ -134,6 +133,7 @@ extern struct platform_device exynos4_device_spdif;
 
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_pwm;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
deleted file mode 100644
index 5b9c42fd32d7..000000000000
--- a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC IRQ VIC timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index df46b776976a..039001c0ef05 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,15 +44,6 @@
 #define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
 #define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
 
-#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
-
-#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
-#define IRQ_TIMER_COUNT		(5)
-
 #define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
 					: ((x) - 16 + S5P_EINT_BASE2))
 
diff --git a/arch/arm/plat-samsung/include/plat/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h
deleted file mode 100644
index bf6a60eb6237..000000000000
--- a/arch/arm/plat-samsung/include/plat/pwm-clock.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_PWM_CLOCK_H
-#define __ASM_PLAT_PWM_CLOCK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	if (soc_is_s3c24xx())
-		return tcfg == S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s3c64xx() || soc_is_s5pc100())
-		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		return 0;
-	else
-		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	if (soc_is_s3c24xx())
-		return 1 << (tcfg1 + 1);
-	else
-		return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	if (soc_is_s3c24xx())
-		return 0;
-	else
-		return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	if (soc_is_s3c24xx())
-		return ilog2(div) - 1;
-	else
-		return ilog2(div);
-}
-#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/plat-samsung/include/plat/pwm-core.h
new file mode 100644
index 000000000000..5bff1facb672
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pwm-core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung PWM controller platform data helpers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PWM_CORE_H
+#define __ASM_ARCH_PWM_CORE_H __FILE__
+
+#include <clocksource/samsung_pwm.h>
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
+#else
+static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
+#endif
+
+#endif /* __ASM_ARCH_PWM_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
deleted file mode 100644
index d097d92f8cc7..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
index 4cc99bb1f176..209464adef97 100644
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -22,29 +22,6 @@ enum samsung_timer_mode {
 	SAMSUNG_PWM4,
 };
 
-struct samsung_timer_source {
-	unsigned int event_id;
-	unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define SAMSUNG_TIMER_MIN_RANGE	4
-
-#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
-#define TCNT_MAX		0xffff
-#define TSCALER_DIV		25
-#define TDIV			50
-#define TSIZE			16
-#else
-#define TCNT_MAX		0xffffffff
-#define TSCALER_DIV		2
-#define TDIV			2
-#define TSIZE			32
-#endif
-
-#define NON_PERIODIC		0
-#define PERIODIC		1
-
 extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
 					enum samsung_timer_mode source);
 
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index ce1d0f785efd..bf650218b40e 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -260,44 +260,6 @@ static inline void s5pv210_default_sdhci3(void) { }
 
 #endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
-/* EXYNOS4 SDHCI setup */
-#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-static inline void exynos4_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void exynos4_default_sdhci0(void) { }
-static inline void exynos4_default_sdhci1(void) { }
-static inline void exynos4_default_sdhci2(void) { }
-static inline void exynos4_default_sdhci3(void) { }
-
-#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
-
 static inline void s3c_sdhci_setname(int id, char *name)
 {
 	switch (id) {
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 50a3ea0037db..aa9511b6914a 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -11,12 +11,18 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 
@@ -148,8 +154,12 @@ static int __init s3c_arch_init(void)
 
 	// do the correct init for cpu
 
-	if (cpu == NULL)
+	if (cpu == NULL) {
+		/* Not needed when booting with device tree. */
+		if (of_have_populated_dt())
+			return 0;
 		panic("s3c_arch_init: NULL cpu\n");
+	}
 
 	ret = (cpu->init)();
 	if (ret != 0)
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
deleted file mode 100644
index 0fceb4273824..000000000000
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/plat-samsung/irq-vic-timer.c
- *	originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-timer.h>
-
-static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	generic_handle_irq((int)desc->irq_data.handler_data);
-	chained_irq_exit(chip, desc);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-static void s3c_irq_timer_ack(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	u32 mask = (1 << 5) << (d->irq - gc->irq_base);
-
-	irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
-}
-
-/**
- * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
- * @num: Number of timers to initialize
- * @timer_irq: Base IRQ number to be used for the timers.
- *
- * Register the necessary IRQ chaining and support for the timer IRQs
- * chained of the VIC.
- */
-void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
-{
-	unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
-				 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
-	struct irq_chip_generic *s3c_tgc;
-	struct irq_chip_type *ct;
-	unsigned int i;
-
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
-	} else {
-		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
-	}
-#endif
-	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
-					 S3C64XX_TINT_CSTAT, handle_level_irq);
-
-	if (!s3c_tgc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
-		       __func__, timer_irq);
-		return;
-	}
-
-	ct = s3c_tgc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_ack = s3c_irq_timer_ack;
-	irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	/* Clear the upper bits of the mask_cache*/
-	s3c_tgc->mask_cache &= 0x1f;
-
-	for (i = 0; i < num; i++, timer_irq++) {
-		irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
-		irq_set_handler_data(pirq[i], (void *)timer_irq);
-	}
-}
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
deleted file mode 100644
index a35ff3bcffe4..000000000000
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <plat/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_pwm_scaler_ops = {
-	.get_rate	= clk_pwm_scaler_get_rate,
-	.set_rate	= clk_pwm_scaler_set_rate,
-	.round_rate	= clk_pwm_scaler_round_rate,
-};
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct clk_ops clk_tdiv_ops = {
-	.get_rate	= clk_pwm_tdiv_get_rate,
-	.set_rate	= clk_pwm_tdiv_set_rate,
-	.round_rate	= clk_pwm_tdiv_round_rate,
-};
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.0",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.1",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.2",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.3",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.4",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	unsigned long mux_tclk;
-
-	if (soc_is_s3c24xx())
-		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		mux_tclk = 0;
-	else
-		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = mux_tclk << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_tin_ops = {
-	.set_parent	= clk_pwm_tin_set_parent,
-};
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.0",
-		.id	= 0,
-		.ops	= &clk_tin_ops,
-	},
-	[1]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.1",
-		.id	= 1,
-		.ops	= &clk_tin_ops,
-	},
-	[2]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.2",
-		.id	= 2,
-		.ops	= &clk_tin_ops,
-	},
-	[3]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.3",
-		.id	= 3,
-		.ops	= &clk_tin_ops,
-	},
-	[4]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.4",
-		.id	= 4,
-		.ops	= &clk_tin_ops,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
-		clk_timer_scaler[clk].parent = clk_timers;
-
-	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
-	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index ff1a76011b1e..ddfaca9c79d8 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -17,9 +17,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <plat/regs-timer.h>
 #include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
@@ -30,6 +28,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 	for (irq = 0; irq < num_vic; irq++)
 		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
 #endif
-
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
diff --git a/arch/arm/plat-samsung/samsung-time.c b/arch/arm/plat-samsung/samsung-time.c
deleted file mode 100644
index 2957075ca836..000000000000
--- a/arch/arm/plat-samsung/samsung-time.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * samsung - Common hr-timer support (s3c and s5p)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/samsung-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct samsung_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void samsung_timer_resume(void);
-
-static void samsung_time_stop(enum samsung_timer_mode mode)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon &= ~S3C2410_TCON_T0START;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon &= ~S3C2410_TCON_T1START;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon &= ~S3C2410_TCON_T2START;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon &= ~S3C2410_TCON_T3START;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon &= ~S3C2410_TCON_T4START;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	tcnt--;
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon &= ~(0x0f << 0);
-		tcon |= S3C2410_TCON_T0MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon &= ~(0x0f << 8);
-		tcon |= S3C2410_TCON_T1MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon &= ~(0x0f << 12);
-		tcon |= S3C2410_TCON_T2MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon &= ~(0x0f << 16);
-		tcon |= S3C2410_TCON_T3MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon &= ~(0x07 << 20);
-		tcon |= S3C2410_TCON_T4MANUALUPD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-
-	__raw_writel(tcnt, S3C2410_TCNTB(mode));
-	__raw_writel(tcnt, S3C2410_TCMPB(mode));
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
-{
-	unsigned long tcon;
-
-	tcon  = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon |= S3C2410_TCON_T0START;
-		tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T0RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T0RELOAD;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon |= S3C2410_TCON_T1START;
-		tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T1RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T1RELOAD;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon |= S3C2410_TCON_T2START;
-		tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T2RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T2RELOAD;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon |= S3C2410_TCON_T3START;
-		tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T3RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T3RELOAD;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon |= S3C2410_TCON_T4START;
-		tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T4RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T4RELOAD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static int samsung_set_next_event(unsigned long cycles,
-				struct clock_event_device *evt)
-{
-	samsung_time_setup(timer_source.event_id, cycles);
-	samsung_time_start(timer_source.event_id, NON_PERIODIC);
-
-	return 0;
-}
-
-static void samsung_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	samsung_time_stop(timer_source.event_id);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		samsung_time_setup(timer_source.event_id, clock_count_per_tick);
-		samsung_time_start(timer_source.event_id, PERIODIC);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		samsung_timer_resume();
-		break;
-	}
-}
-
-static void samsung_timer_resume(void)
-{
-	/* event timer restart */
-	samsung_time_setup(timer_source.event_id, clock_count_per_tick);
-	samsung_time_start(timer_source.event_id, PERIODIC);
-
-	/* source timer restart */
-	samsung_time_setup(timer_source.source_id, TCNT_MAX);
-	samsung_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init samsung_set_timer_source(enum samsung_timer_mode event,
-				 enum samsung_timer_mode source)
-{
-	s3c_device_timer[event].dev.bus = &platform_bus_type;
-	s3c_device_timer[source].dev.bus = &platform_bus_type;
-
-	timer_source.event_id = event;
-	timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
-	.name		= "samsung_event_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= samsung_set_next_event,
-	.set_mode	= samsung_set_mode,
-};
-
-static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction samsung_clock_event_irq = {
-	.name		= "samsung_time_irq",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= samsung_clock_event_isr,
-	.dev_id		= &time_event_device,
-};
-
-static void __init samsung_clockevent_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-	unsigned int irq_number;
-	struct clk *tscaler;
-
-	pclk = clk_get_rate(timerclk);
-
-	tscaler = clk_get_parent(tdiv_event);
-
-	clk_set_rate(tscaler, pclk / TSCALER_DIV);
-	clk_set_rate(tdiv_event, pclk / TDIV);
-	clk_set_parent(tin_event, tdiv_event);
-
-	clock_rate = clk_get_rate(tin_event);
-	clock_count_per_tick = clock_rate / HZ;
-
-	time_event_device.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
-
-	irq_number = timer_source.event_id + IRQ_TIMER0;
-	setup_irq(irq_number, &samsung_clock_event_irq);
-}
-
-static void __iomem *samsung_timer_reg(void)
-{
-	unsigned long offset = 0;
-
-	switch (timer_source.source_id) {
-	case SAMSUNG_PWM0:
-	case SAMSUNG_PWM1:
-	case SAMSUNG_PWM2:
-	case SAMSUNG_PWM3:
-		offset = (timer_source.source_id * 0x0c) + 0x14;
-		break;
-
-	case SAMSUNG_PWM4:
-		offset = 0x40;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
-		return NULL;
-	}
-
-	return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace samsung_read_sched_clock(void)
-{
-	void __iomem *reg = samsung_timer_reg();
-
-	if (!reg)
-		return 0;
-
-	return ~__raw_readl(reg);
-}
-
-static void __init samsung_clocksource_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-
-	pclk = clk_get_rate(timerclk);
-
-	clk_set_rate(tdiv_source, pclk / TDIV);
-	clk_set_parent(tin_source, tdiv_source);
-
-	clock_rate = clk_get_rate(tin_source);
-
-	samsung_time_setup(timer_source.source_id, TCNT_MAX);
-	samsung_time_start(timer_source.source_id, PERIODIC);
-
-	setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
-
-	if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
-			clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
-		panic("samsung_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init samsung_timer_resources(void)
-{
-
-	unsigned long event_id = timer_source.event_id;
-	unsigned long source_id = timer_source.source_id;
-	char devname[15];
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get timers clock for timer");
-
-	clk_enable(timerclk);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", event_id);
-	s3c_device_timer[event_id].id = event_id;
-	s3c_device_timer[event_id].dev.init_name = devname;
-
-	tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
-	if (IS_ERR(tin_event))
-		panic("failed to get pwm-tin clock for event timer");
-
-	tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_event))
-		panic("failed to get pwm-tdiv clock for event timer");
-
-	clk_enable(tin_event);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", source_id);
-	s3c_device_timer[source_id].id = source_id;
-	s3c_device_timer[source_id].dev.init_name = devname;
-
-	tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
-	if (IS_ERR(tin_source))
-		panic("failed to get pwm-tin clock for source timer");
-
-	tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_source))
-		panic("failed to get pwm-tdiv clock for source timer");
-
-	clk_enable(tin_source);
-}
-
-void __init samsung_timer_init(void)
-{
-	samsung_timer_resources();
-	samsung_clockevent_init();
-	samsung_clocksource_init();
-}
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315990a7..000000000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S
index 2677bc3762d7..40f27e52de75 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@@ -10,6 +10,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 /*
  * Realview/Versatile Express specific entry point for secondary CPUs.
@@ -17,6 +18,7 @@
  * until we're ready for them to initialise.
  */
 ENTRY(versatile_secondary_startup)
+ ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	bic	r0, #0xff000000
 	adr	r4, 1f
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 52b8f40b1c73..2f37e1d6cb45 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -642,9 +642,9 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
 static int vfp_hotplug(struct notifier_block *b, unsigned long action,
 	void *hcpu)
 {
-	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
-		vfp_force_reload((long)hcpu, current_thread_info());
-	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+	if (action == CPU_DYING || action == CPU_DYING_FROZEN)
+		vfp_current_hw_state[(long)hcpu] = NULL;
+	else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
 		vfp_enable(NULL);
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile
index 43841033afd3..12969523414c 100644
--- a/arch/arm/xen/Makefile
+++ b/arch/arm/xen/Makefile
@@ -1 +1 @@
-obj-y		:= enlighten.o hypercall.o grant-table.o
+obj-y		:= enlighten.o hypercall.o grant-table.o p2m.o mm.o
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 8a6295c86209..83e4f959ee47 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -21,6 +21,8 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
+#include <linux/cpuidle.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mm.h>
 
@@ -267,18 +269,28 @@ static int __init xen_guest_init(void)
 	if (!xen_initial_domain())
 		xenbus_probe(NULL);
 
+	/*
+	 * Making sure board specific code will not set up ops for
+	 * cpu idle and cpu freq.
+	 */
+	disable_cpuidle();
+	disable_cpufreq();
+
 	return 0;
 }
 core_initcall(xen_guest_init);
 
 static int __init xen_pm_init(void)
 {
+	if (!xen_domain())
+		return -ENODEV;
+
 	pm_power_off = xen_power_off;
 	arm_pm_restart = xen_restart;
 
 	return 0;
 }
-subsys_initcall(xen_pm_init);
+late_initcall(xen_pm_init);
 
 static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
new file mode 100644
index 000000000000..b0e77de99148
--- /dev/null
+++ b/arch/arm/xen/mm.c
@@ -0,0 +1,65 @@
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/swiotlb.h>
+
+#include <xen/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/swiotlb-xen.h>
+
+#include <asm/cacheflush.h>
+#include <asm/xen/page.h>
+#include <asm/xen/hypercall.h>
+#include <asm/xen/interface.h>
+
+int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
+				 unsigned int address_bits,
+				 dma_addr_t *dma_handle)
+{
+	if (!xen_initial_domain())
+		return -EINVAL;
+
+	/* we assume that dom0 is mapped 1:1 for now */
+	*dma_handle = pstart;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xen_create_contiguous_region);
+
+void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
+{
+	return;
+}
+EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region);
+
+struct dma_map_ops *xen_dma_ops;
+EXPORT_SYMBOL_GPL(xen_dma_ops);
+
+static struct dma_map_ops xen_swiotlb_dma_ops = {
+	.mapping_error = xen_swiotlb_dma_mapping_error,
+	.alloc = xen_swiotlb_alloc_coherent,
+	.free = xen_swiotlb_free_coherent,
+	.sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = xen_swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu = xen_swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = xen_swiotlb_sync_sg_for_device,
+	.map_sg = xen_swiotlb_map_sg_attrs,
+	.unmap_sg = xen_swiotlb_unmap_sg_attrs,
+	.map_page = xen_swiotlb_map_page,
+	.unmap_page = xen_swiotlb_unmap_page,
+	.dma_supported = xen_swiotlb_dma_supported,
+	.set_dma_mask = xen_swiotlb_set_dma_mask,
+};
+
+int __init xen_mm_init(void)
+{
+	if (!xen_initial_domain())
+		return 0;
+	xen_swiotlb_init(1, false);
+	xen_dma_ops = &xen_swiotlb_dma_ops;
+	return 0;
+}
+arch_initcall(xen_mm_init);
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
new file mode 100644
index 000000000000..23732cdff551
--- /dev/null
+++ b/arch/arm/xen/p2m.c
@@ -0,0 +1,208 @@
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/rwlock.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/swiotlb.h>
+
+#include <xen/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/swiotlb-xen.h>
+
+#include <asm/cacheflush.h>
+#include <asm/xen/page.h>
+#include <asm/xen/hypercall.h>
+#include <asm/xen/interface.h>
+
+struct xen_p2m_entry {
+	unsigned long pfn;
+	unsigned long mfn;
+	unsigned long nr_pages;
+	struct rb_node rbnode_mach;
+	struct rb_node rbnode_phys;
+};
+
+rwlock_t p2m_lock;
+struct rb_root phys_to_mach = RB_ROOT;
+static struct rb_root mach_to_phys = RB_ROOT;
+
+static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
+{
+	struct rb_node **link = &phys_to_mach.rb_node;
+	struct rb_node *parent = NULL;
+	struct xen_p2m_entry *entry;
+	int rc = 0;
+
+	while (*link) {
+		parent = *link;
+		entry = rb_entry(parent, struct xen_p2m_entry, rbnode_phys);
+
+		if (new->mfn == entry->mfn)
+			goto err_out;
+		if (new->pfn == entry->pfn)
+			goto err_out;
+
+		if (new->pfn < entry->pfn)
+			link = &(*link)->rb_left;
+		else
+			link = &(*link)->rb_right;
+	}
+	rb_link_node(&new->rbnode_phys, parent, link);
+	rb_insert_color(&new->rbnode_phys, &phys_to_mach);
+	goto out;
+
+err_out:
+	rc = -EINVAL;
+	pr_warn("%s: cannot add pfn=%pa -> mfn=%pa: pfn=%pa -> mfn=%pa already exists\n",
+			__func__, &new->pfn, &new->mfn, &entry->pfn, &entry->mfn);
+out:
+	return rc;
+}
+
+unsigned long __pfn_to_mfn(unsigned long pfn)
+{
+	struct rb_node *n = phys_to_mach.rb_node;
+	struct xen_p2m_entry *entry;
+	unsigned long irqflags;
+
+	read_lock_irqsave(&p2m_lock, irqflags);
+	while (n) {
+		entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
+		if (entry->pfn <= pfn &&
+				entry->pfn + entry->nr_pages > pfn) {
+			read_unlock_irqrestore(&p2m_lock, irqflags);
+			return entry->mfn + (pfn - entry->pfn);
+		}
+		if (pfn < entry->pfn)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	read_unlock_irqrestore(&p2m_lock, irqflags);
+
+	return INVALID_P2M_ENTRY;
+}
+EXPORT_SYMBOL_GPL(__pfn_to_mfn);
+
+static int xen_add_mach_to_phys_entry(struct xen_p2m_entry *new)
+{
+	struct rb_node **link = &mach_to_phys.rb_node;
+	struct rb_node *parent = NULL;
+	struct xen_p2m_entry *entry;
+	int rc = 0;
+
+	while (*link) {
+		parent = *link;
+		entry = rb_entry(parent, struct xen_p2m_entry, rbnode_mach);
+
+		if (new->mfn == entry->mfn)
+			goto err_out;
+		if (new->pfn == entry->pfn)
+			goto err_out;
+
+		if (new->mfn < entry->mfn)
+			link = &(*link)->rb_left;
+		else
+			link = &(*link)->rb_right;
+	}
+	rb_link_node(&new->rbnode_mach, parent, link);
+	rb_insert_color(&new->rbnode_mach, &mach_to_phys);
+	goto out;
+
+err_out:
+	rc = -EINVAL;
+	pr_warn("%s: cannot add pfn=%pa -> mfn=%pa: pfn=%pa -> mfn=%pa already exists\n",
+			__func__, &new->pfn, &new->mfn, &entry->pfn, &entry->mfn);
+out:
+	return rc;
+}
+
+unsigned long __mfn_to_pfn(unsigned long mfn)
+{
+	struct rb_node *n = mach_to_phys.rb_node;
+	struct xen_p2m_entry *entry;
+	unsigned long irqflags;
+
+	read_lock_irqsave(&p2m_lock, irqflags);
+	while (n) {
+		entry = rb_entry(n, struct xen_p2m_entry, rbnode_mach);
+		if (entry->mfn <= mfn &&
+				entry->mfn + entry->nr_pages > mfn) {
+			read_unlock_irqrestore(&p2m_lock, irqflags);
+			return entry->pfn + (mfn - entry->mfn);
+		}
+		if (mfn < entry->mfn)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	read_unlock_irqrestore(&p2m_lock, irqflags);
+
+	return INVALID_P2M_ENTRY;
+}
+EXPORT_SYMBOL_GPL(__mfn_to_pfn);
+
+bool __set_phys_to_machine_multi(unsigned long pfn,
+		unsigned long mfn, unsigned long nr_pages)
+{
+	int rc;
+	unsigned long irqflags;
+	struct xen_p2m_entry *p2m_entry;
+	struct rb_node *n = phys_to_mach.rb_node;
+
+	if (mfn == INVALID_P2M_ENTRY) {
+		write_lock_irqsave(&p2m_lock, irqflags);
+		while (n) {
+			p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
+			if (p2m_entry->pfn <= pfn &&
+					p2m_entry->pfn + p2m_entry->nr_pages > pfn) {
+				rb_erase(&p2m_entry->rbnode_mach, &mach_to_phys);
+				rb_erase(&p2m_entry->rbnode_phys, &phys_to_mach);
+				write_unlock_irqrestore(&p2m_lock, irqflags);
+				kfree(p2m_entry);
+				return true;
+			}
+			if (pfn < p2m_entry->pfn)
+				n = n->rb_left;
+			else
+				n = n->rb_right;
+		}
+		write_unlock_irqrestore(&p2m_lock, irqflags);
+		return true;
+	}
+
+	p2m_entry = kzalloc(sizeof(struct xen_p2m_entry), GFP_NOWAIT);
+	if (!p2m_entry) {
+		pr_warn("cannot allocate xen_p2m_entry\n");
+		return false;
+	}
+	p2m_entry->pfn = pfn;
+	p2m_entry->nr_pages = nr_pages;
+	p2m_entry->mfn = mfn;
+
+	write_lock_irqsave(&p2m_lock, irqflags);
+	if ((rc = xen_add_phys_to_mach_entry(p2m_entry) < 0) ||
+		(rc = xen_add_mach_to_phys_entry(p2m_entry) < 0)) {
+		write_unlock_irqrestore(&p2m_lock, irqflags);
+		return false;
+	}
+	write_unlock_irqrestore(&p2m_lock, irqflags);
+	return true;
+}
+EXPORT_SYMBOL_GPL(__set_phys_to_machine_multi);
+
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	return __set_phys_to_machine_multi(pfn, mfn, 1);
+}
+EXPORT_SYMBOL_GPL(__set_phys_to_machine);
+
+int p2m_init(void)
+{
+	rwlock_init(&p2m_lock);
+	return 0;
+}
+arch_initcall(p2m_init);