summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf609/boards/ezkit.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf609/boards/ezkit.c')
-rw-r--r--arch/blackfin/mach-bf609/boards/ezkit.c304
1 files changed, 295 insertions, 9 deletions
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index ac64f47217c1..c2cf1ae31189 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -677,11 +677,28 @@ int bf609_nor_flash_init(struct platform_device *dev)
return 0;
}
+void bf609_nor_flash_exit(struct platform_device *dev)
+{
+ const unsigned short pins[] = {
+ P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+ P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
+ };
+
+ peripheral_free_list(pins);
+
+ bfin_write32(SMC_GCTL, 0);
+}
+
static struct physmap_flash_data ezkit_flash_data = {
.width = 2,
.parts = ezkit_partitions,
- .init = bf609_nor_flash_init,
+ .init = bf609_nor_flash_init,
+ .exit = bf609_nor_flash_exit,
.nr_parts = ARRAY_SIZE(ezkit_partitions),
+#ifdef CONFIG_ROMKERNEL
+ .probe_type = "map_rom",
+#endif
};
static struct resource ezkit_flash_resource = {
@@ -739,7 +756,7 @@ static struct bfin6xx_spi_chip spidev_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE)
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
@@ -825,6 +842,12 @@ static struct adau1761_platform_data adau1761_info = {
static const unsigned short ppi_req[] = {
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE)
+ P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
+ P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
+#endif
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
0,
};
@@ -855,7 +878,7 @@ static struct bcap_route vs6624_routes[] = {
},
};
-static const unsigned vs6624_ce_pin = GPIO_PD1;
+static const unsigned vs6624_ce_pin = GPIO_PE4;
static struct bfin_capture_config bfin_capture_data = {
.card_name = "BF609",
@@ -871,7 +894,128 @@ static struct bfin_capture_config bfin_capture_data = {
.ppi_info = &ppi_info,
.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI
| EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
- .blank_clocks = 8,
+ .blank_pixels = 4,
+};
+#endif
+
+#if defined(CONFIG_VIDEO_ADV7842) \
+ || defined(CONFIG_VIDEO_ADV7842_MODULE)
+#include <media/adv7842.h>
+
+static struct v4l2_input adv7842_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS,
+ },
+ {
+ .index = 3,
+ .name = "VGA",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS,
+ },
+ {
+ .index = 4,
+ .name = "HDMI",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS,
+ },
+};
+
+static struct bcap_route adv7842_routes[] = {
+ {
+ .input = 3,
+ .output = 0,
+ .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+ | EPPI_CTL_ACTIVE656),
+ },
+ {
+ .input = 4,
+ .output = 0,
+ },
+ {
+ .input = 2,
+ .output = 0,
+ },
+ {
+ .input = 1,
+ .output = 0,
+ },
+ {
+ .input = 0,
+ .output = 1,
+ .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+ | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2
+ | EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
+ },
+};
+
+static struct adv7842_output_format adv7842_opf[] = {
+ {
+ .op_ch_sel = ADV7842_OP_CH_SEL_BRG,
+ .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8,
+ .op_656_range = 1,
+ .blank_data = 1,
+ .insert_av_codes = 1,
+ },
+ {
+ .op_ch_sel = ADV7842_OP_CH_SEL_RGB,
+ .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16,
+ .op_656_range = 1,
+ .blank_data = 1,
+ },
+};
+
+static struct adv7842_platform_data adv7842_data = {
+ .opf = adv7842_opf,
+ .num_opf = ARRAY_SIZE(adv7842_opf),
+ .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1,
+ .prim_mode = ADV7842_PRIM_MODE_SDP,
+ .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1,
+ .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO,
+ .i2c_sdp_io = 0x40,
+ .i2c_sdp = 0x41,
+ .i2c_cp = 0x42,
+ .i2c_vdp = 0x43,
+ .i2c_afe = 0x44,
+ .i2c_hdmi = 0x45,
+ .i2c_repeater = 0x46,
+ .i2c_edid = 0x47,
+ .i2c_infoframe = 0x48,
+ .i2c_cec = 0x49,
+ .i2c_avlink = 0x4a,
+ .i2c_ex = 0x26,
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF609",
+ .inputs = adv7842_inputs,
+ .num_inputs = ARRAY_SIZE(adv7842_inputs),
+ .routes = adv7842_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7842",
+ .addr = 0x20,
+ .platform_data = (void *)&adv7842_data,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+ | EPPI_CTL_ACTIVE656),
};
#endif
@@ -883,6 +1027,80 @@ static struct platform_device bfin_capture_device = {
};
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
+ || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_display.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req_disp[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_EPPI3,
+ .dma_ch = CH_EPPI0_CH0,
+ .irq_err = IRQ_EPPI0_STAT,
+ .base = (void __iomem *)EPPI0_STAT,
+ .pin_req = ppi_req_disp,
+};
+
+#if defined(CONFIG_VIDEO_ADV7511) \
+ || defined(CONFIG_VIDEO_ADV7511_MODULE)
+#include <media/adv7511.h>
+
+static struct v4l2_output adv7511_outputs[] = {
+ {
+ .index = 0,
+ .name = "HDMI",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS,
+ },
+};
+
+static struct disp_route adv7511_routes[] = {
+ {
+ .output = 0,
+ },
+};
+
+static struct adv7511_platform_data adv7511_data = {
+ .edid_addr = 0x7e,
+ .i2c_ex = 0x25,
+};
+
+static struct bfin_display_config bfin_display_data = {
+ .card_name = "BF609",
+ .outputs = adv7511_outputs,
+ .num_outputs = ARRAY_SIZE(adv7511_outputs),
+ .routes = adv7511_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7511",
+ .addr = 0x39,
+ .platform_data = (void *)&adv7511_data,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+ | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3
+ | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2
+ | EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
+static struct platform_device bfin_display_device = {
+ .name = "bfin_display",
+ .dev = {
+ .platform_data = &bfin_display_data,
+ },
+};
+#endif
+
#if defined(CONFIG_BFIN_CRC)
#define BFIN_CRC_NAME "bfin-crc"
@@ -947,6 +1165,39 @@ static struct platform_device bfin_crc1_device = {
};
#endif
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc"
+#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c
+
+static struct resource bfin_crypto_crc_resources[] = {
+ {
+ .start = REG_CRC0_CTL,
+ .end = REG_CRC0_REVID+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CRC0_DCNTEXP,
+ .end = IRQ_CRC0_DCNTEXP,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_MEM_STREAM0_SRC_CRC0,
+ .end = CH_MEM_STREAM0_SRC_CRC0,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device bfin_crypto_crc_device = {
+ .name = BFIN_CRYPTO_CRC_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources),
+ .resource = bfin_crypto_crc_resources,
+ .dev = {
+ .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA,
+ },
+};
+#endif
+
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
@@ -963,6 +1214,28 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -981,10 +1254,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
+ .irq = IRQ_PD9,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 2,
+ .chip_select = 4,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
@@ -1050,7 +1323,7 @@ static struct resource bfin_spi1_resource[] = {
/* SPI controller data */
static struct bfin6xx_spi_master bf60x_spi_master_info0 = {
- .num_chipselect = 4,
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
@@ -1065,7 +1338,7 @@ static struct platform_device bf60x_spi_master0 = {
};
static struct bfin6xx_spi_master bf60x_spi_master_info1 = {
- .num_chipselect = 4,
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};
@@ -1146,6 +1419,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
.platform_data = (void *)&adau1761_info
},
#endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+ {
+ I2C_BOARD_INFO("ssm2602", 0x1b),
+ },
+#endif
};
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
@@ -1261,6 +1539,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_crc0_device,
&bfin_crc1_device,
#endif
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+ &bfin_crypto_crc_device,
+#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
@@ -1269,7 +1550,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE)
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
@@ -1284,6 +1565,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
&bfin_capture_device,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
+ || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+ &bfin_display_device,
+#endif
+
};
static int __init ezkit_init(void)