summaryrefslogtreecommitdiff
path: root/arch/m68k/include/asm/m528xsim.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/include/asm/m528xsim.h')
-rw-r--r--arch/m68k/include/asm/m528xsim.h51
1 files changed, 1 insertions, 50 deletions
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 4acb3c0a642e..cf68ca0ac3a5 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -233,23 +233,6 @@
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
#define MCFGPIO_PIN_MAX 180
-
-/*
- * Derek Cheung - 6 Feb 2005
- * add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR 0x10005C
-
-/* Interrupt Mask Register Register Low */
-#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
/*
* Reset Control Unit (relative to IPSBAR).
*/
@@ -259,37 +242,5 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
-#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
-#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
-#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
-
-#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
-#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
-#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-
+/****************************************************************************/
#endif /* m528xsim_h */