summaryrefslogtreecommitdiff
path: root/arch/mips/boot/dts/ingenic/ci20.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/boot/dts/ingenic/ci20.dts')
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts63
1 files changed, 47 insertions, 16 deletions
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 37b93166bf22..db0ca250bd1a 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,9 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/ {
compatible = "img,ci20", "ingenic,jz4780";
@@ -25,6 +28,17 @@
0x30000000 0x30000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ sw1 {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -56,10 +70,17 @@
eth0_power: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "eth0_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
enable-active-high;
};
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
wlan0_power: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "wlan0_power";
@@ -163,63 +184,71 @@
regulators {
vddcore: SUDCDC1 {
- regulator-name = "VDDCORE";
+ regulator-name = "DCDC_REG1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vddmem: SUDCDC2 {
- regulator-name = "VDDMEM";
+ regulator-name = "DCDC_REG2";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vcc_33: SUDCDC3 {
- regulator-name = "VCC33";
+ regulator-name = "DCDC_REG3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_50: SUDCDC4 {
- regulator-name = "VCC50";
+ regulator-name = "SUDCDC_REG4";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vcc_25: LDO_REG5 {
- regulator-name = "VCC25";
+ regulator-name = "LDO_REG5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
wifi_io: LDO_REG6 {
- regulator-name = "WIFIIO";
+ regulator-name = "LDO_REG6";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vcc_28: LDO_REG7 {
- regulator-name = "VCC28";
+ regulator-name = "LDO_REG7";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
vcc_15: LDO_REG8 {
- regulator-name = "VCC15";
+ regulator-name = "LDO_REG8";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
- vcc_18: LDO_REG9 {
- regulator-name = "VCC18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ vrtc_18: LDO_REG9 {
+ regulator-name = "LDO_REG9";
+ /* Despite the datasheet stating 3.3V
+ * for REG9 and the driver expecting that,
+ * REG9 outputs 1.8V.
+ * Likely the CI20 uses a proprietary
+ * factory programmed chip variant.
+ * Since this is a simple on/off LDO the
+ * exact values do not matter.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_11: LDO_REG10 {
- regulator-name = "VCC11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ regulator-name = "LDO_REG10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
};
};
@@ -261,7 +290,9 @@
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
- interrupts = <110>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
};
};