summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/netlogic')
-rw-r--r--arch/mips/netlogic/Kconfig15
-rw-r--r--arch/mips/netlogic/Makefile1
-rw-r--r--arch/mips/netlogic/dts/Makefile4
-rw-r--r--arch/mips/netlogic/dts/xlp_evp.dts124
-rw-r--r--arch/mips/netlogic/xlp/Makefile3
-rw-r--r--arch/mips/netlogic/xlp/of.c34
-rw-r--r--arch/mips/netlogic/xlp/platform.c108
-rw-r--r--arch/mips/netlogic/xlp/setup.c32
8 files changed, 176 insertions, 145 deletions
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 75bec44b5856..8059eb76f8eb 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -1,2 +1,17 @@
+if NLM_XLP_BOARD || NLM_XLR_BOARD
+
+if NLM_XLP_BOARD
+config DT_XLP_EVP
+ bool "Built-in device tree for XLP EVP/SVP boards"
+ default y
+ help
+ Add an FDT blob for XLP EVP and SVP boards into the kernel.
+ This DTB will be used if the firmware does not pass in a DTB
+ pointer to the kernel. The corresponding DTS file is at
+ arch/mips/netlogic/dts/xlp_evp.dts
+endif
+
config NLM_COMMON
bool
+
+endif
diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile
index 36d169b2ca6d..7602d1386614 100644
--- a/arch/mips/netlogic/Makefile
+++ b/arch/mips/netlogic/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_NLM_COMMON) += common/
obj-$(CONFIG_CPU_XLR) += xlr/
obj-$(CONFIG_CPU_XLP) += xlp/
+obj-$(CONFIG_CPU_XLP) += dts/
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
new file mode 100644
index 000000000000..67ae3fe296f0
--- /dev/null
+++ b/arch/mips/netlogic/dts/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+ $(call if_changed,dtc)
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
new file mode 100644
index 000000000000..e14f42308064
--- /dev/null
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -0,0 +1,124 @@
+/*
+ * XLP8XX Device Tree Source for EVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-EVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M
+ 0 0x20000000 0 0xa0000000 // 2560M at 512M
+ 0 0xe0000000 1 0x00000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x01000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@32000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x32100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@33000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x33100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index 6b4b972218f0..a84d6ed3746c 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,4 +1,3 @@
-obj-y += setup.o platform.o nlm_hal.o
-obj-$(CONFIG_OF) += of.o
+obj-y += setup.o nlm_hal.o
obj-$(CONFIG_SMP) += wakeup.o
obj-$(CONFIG_USB) += usb-init.o
diff --git a/arch/mips/netlogic/xlp/of.c b/arch/mips/netlogic/xlp/of.c
deleted file mode 100644
index 8e3921c0c201..000000000000
--- a/arch/mips/netlogic/xlp/of.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/bootmem.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of_fdt.h>
-#include <asm/byteorder.h>
-
-static int __init reserve_mem_mach(unsigned long addr, unsigned long size)
-{
- return reserve_bootmem(addr, size, BOOTMEM_DEFAULT);
-}
-
-void __init free_mem_mach(unsigned long addr, unsigned long size)
-{
- return free_bootmem(addr, size);
-}
-
-void __init device_tree_init(void)
-{
- unsigned long base, size;
-
- if (!initial_boot_params)
- return;
-
- base = virt_to_phys((void *)initial_boot_params);
- size = be32_to_cpu(initial_boot_params->totalsize);
-
- /* Before we do anything, lets reserve the dt blob */
- reserve_mem_mach(base, size);
-
- unflatten_device_tree();
-
- /* free the space reserved for the dt blob */
- free_mem_mach(base, size);
-}
diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c
deleted file mode 100644
index 2c510d585447..000000000000
--- a/arch/mips/netlogic/xlp/platform.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/pci.h>
-#include <linux/serial_reg.h>
-#include <linux/spinlock.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/uart.h>
-
-static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
-{
- return nlm_read_reg(p->iobase, offset);
-}
-
-static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
-{
- nlm_write_reg(p->iobase, offset, value);
-}
-
-#define PORT(_irq) \
- { \
- .irq = _irq, \
- .regshift = 2, \
- .iotype = UPIO_MEM32, \
- .flags = (UPF_SKIP_TEST|UPF_FIXED_TYPE|\
- UPF_BOOT_AUTOCONF), \
- .uartclk = XLP_IO_CLK, \
- .type = PORT_16550A, \
- .serial_in = nlm_xlp_uart_in, \
- .serial_out = nlm_xlp_uart_out, \
- }
-
-static struct plat_serial8250_port xlp_uart_data[] = {
- PORT(PIC_UART_0_IRQ),
- PORT(PIC_UART_1_IRQ),
- {},
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = xlp_uart_data,
- },
-};
-
-static int __init nlm_platform_uart_init(void)
-{
- unsigned long mmio;
-
- mmio = (unsigned long)nlm_get_uart_regbase(0, 0);
- xlp_uart_data[0].iobase = mmio;
- xlp_uart_data[0].membase = (void __iomem *)mmio;
- xlp_uart_data[0].mapbase = mmio;
-
- mmio = (unsigned long)nlm_get_uart_regbase(0, 1);
- xlp_uart_data[1].iobase = mmio;
- xlp_uart_data[1].membase = (void __iomem *)mmio;
- xlp_uart_data[1].mapbase = mmio;
-
- return platform_device_register(&uart_device);
-}
-
-arch_initcall(nlm_platform_uart_init);
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 3dec9f28b65b..d8997098defd 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -35,6 +35,7 @@
#include <linux/kernel.h>
#include <linux/serial_8250.h>
#include <linux/pm.h>
+#include <linux/bootmem.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -56,6 +57,7 @@ unsigned long nlm_common_ebase = 0x0;
/* default to uniprocessor */
uint32_t nlm_coremask = 1, nlm_cpumask = 1;
int nlm_threads_per_core = 1;
+extern u32 __dtb_start[];
static void nlm_linux_exit(void)
{
@@ -96,9 +98,18 @@ void __init prom_init(void)
{
void *fdtp;
- fdtp = (void *)(long)fw_arg0;
xlp_mmu_init();
nlm_hal_init();
+
+ /*
+ * If no FDT pointer is passed in, use the built-in FDT.
+ * device_tree_init() does not handle CKSEG0 pointers in
+ * 64-bit, so convert pointer.
+ */
+ fdtp = (void *)(long)fw_arg0;
+ if (!fdtp)
+ fdtp = __dtb_start;
+ fdtp = phys_to_virt(__pa(fdtp));
early_init_devtree(fdtp);
nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
@@ -112,6 +123,25 @@ void __init prom_init(void)
#endif
}
+void __init device_tree_init(void)
+{
+ unsigned long base, size;
+
+ if (!initial_boot_params)
+ return;
+
+ base = virt_to_phys((void *)initial_boot_params);
+ size = be32_to_cpu(initial_boot_params->totalsize);
+
+ /* Before we do anything, lets reserve the dt blob */
+ reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+ unflatten_device_tree();
+
+ /* free the space reserved for the dt blob */
+ free_bootmem(base, size);
+}
+
static struct of_device_id __initdata xlp_ids[] = {
{ .compatible = "simple-bus", },
{},
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-22 00:25:09 +0300