summaryrefslogtreecommitdiff
path: root/arch/mips/pmc-sierra
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pmc-sierra')
-rw-r--r--arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c14
-rw-r--r--arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h4
2 files changed, 9 insertions, 9 deletions
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index b067988614c3..97862f45496d 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -30,7 +30,7 @@
*
* This code reads the ATMEL 24CXX EEPROM. The PMC-Sierra Yosemite board uses the ATMEL
* 24C32/24C64 which uses two byte addressing as compared to 24C16. Note that this program
- * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
+ * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
* expected to have a connectivity from the EEPROM to the serial port. This program does
* __not__ communicate using the I2C protocol
*/
@@ -64,14 +64,14 @@ static void send_ack(void)
static void send_byte(unsigned char byte)
{
int i = 0;
-
- for (i = 7; i >= 0; i--)
+
+ for (i = 7; i >= 0; i--)
send_bit((byte >> i) & 0x01);
}
-
+
static void send_start(void)
{
- sda_hi;
+ sda_hi;
delay(TXX);
scl_hi;
delay(TXX);
@@ -114,9 +114,9 @@ static unsigned char recv_byte(void) {
int i;
unsigned char byte=0;
- for (i=7;i>=0;i--)
+ for (i=7;i>=0;i--)
byte |= (recv_bit() << i);
-
+
return byte;
}
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index d27566d99ffc..c19f01a32045 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -27,7 +27,7 @@
*/
/*
- * Header file for atmel_read_eeprom.c
+ * Header file for atmel_read_eeprom.c
*/
#include <linux/types.h>
@@ -46,7 +46,7 @@
#define DEFAULT_PORT "/dev/ttyS0" /* Port to open */
#define TXX 0 /* Dummy loop for spinning */
-#define BLOCK_SEL 0x00
+#define BLOCK_SEL 0x00
#define SLAVE_ADDR 0xa0
#define READ_BIT 0x01
#define WRITE_BIT 0x00