summaryrefslogtreecommitdiff
path: root/arch/mips/pmcs-msp71xx/msp_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pmcs-msp71xx/msp_serial.c')
-rw-r--r--arch/mips/pmcs-msp71xx/msp_serial.c154
1 files changed, 0 insertions, 154 deletions
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
deleted file mode 100644
index 940c684f6921..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * The setup file for serial related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/serial.h>
-#include <linux/serial_8250.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-struct msp_uart_data {
- int last_lcr;
-};
-
-static void msp_serial_out(struct uart_port *p, int offset, int value)
-{
- struct msp_uart_data *d = p->private_data;
-
- if (offset == UART_LCR)
- d->last_lcr = value;
-
- offset <<= p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static unsigned int msp_serial_in(struct uart_port *p, int offset)
-{
- offset <<= p->regshift;
-
- return readb(p->membase + offset);
-}
-
-static int msp_serial_handle_irq(struct uart_port *p)
-{
- struct msp_uart_data *d = p->private_data;
- unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
-
- if (serial8250_handle_irq(p, iir)) {
- return 1;
- } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /*
- * The DesignWare APB UART has an Busy Detect (0x07) interrupt
- * meaning an LCR write attempt occurred while the UART was
- * busy. The interrupt must be cleared by reading the UART
- * status register (USR) and the LCR re-written.
- *
- * Note: MSP reserves 0x20 bytes of address space for the UART
- * and the USR is mapped in a separate block at an offset of
- * 0xc0 from the start of the UART.
- */
- (void)readb(p->membase + 0xc0);
- writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
-
- return 1;
- }
-
- return 0;
-}
-
-void __init msp_serial_setup(void)
-{
- char *s;
- char *endp;
- struct uart_port up;
- unsigned int uartclk;
-
- memset(&up, 0, sizeof(up));
-
- /* Check if clock was specified in environment */
- s = prom_getenv("uartfreqhz");
- if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
- uartclk = MSP_BASE_BAUD;
- ppfinit("UART clock set to %d\n", uartclk);
-
- /* Initialize first serial port */
- up.mapbase = MSP_UART0_BASE;
- up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
- up.irq = MSP_INT_UART0;
- up.uartclk = uartclk;
- up.regshift = 2;
- up.iotype = UPIO_MEM;
- up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- up.type = PORT_16550A;
- up.line = 0;
- up.serial_out = msp_serial_out;
- up.serial_in = msp_serial_in;
- up.handle_irq = msp_serial_handle_irq;
- up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
- if (!up.private_data) {
- pr_err("failed to allocate uart private data\n");
- return;
- }
- if (early_serial_setup(&up)) {
- kfree(up.private_data);
- pr_err("Early serial init of port 0 failed\n");
- }
-
- /* Initialize the second serial port, if one exists */
- switch (mips_machtype) {
- case MACH_MSP4200_EVAL:
- case MACH_MSP4200_GW:
- case MACH_MSP4200_FPGA:
- case MACH_MSP7120_EVAL:
- case MACH_MSP7120_GW:
- case MACH_MSP7120_FPGA:
- /* Enable UART1 on MSP4200 and MSP7120 */
- *GPIO_CFG2_REG = 0x00002299;
- break;
-
- default:
- return; /* No second serial port, good-bye. */
- }
-
- up.mapbase = MSP_UART1_BASE;
- up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
- up.irq = MSP_INT_UART1;
- up.line = 1;
- up.private_data = (void*)UART1_STATUS_REG;
- if (early_serial_setup(&up)) {
- kfree(up.private_data);
- pr_err("Early serial init of port 1 failed\n");
- }
-}