diff options
Diffstat (limited to 'arch/riscv/boot/dts')
-rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 32 | ||||
-rw-r--r-- | arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 75 | ||||
-rw-r--r-- | arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi | 16 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts | 20 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 9 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1812h.dtsi | 4 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 132 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/Makefile | 1 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 599 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts | 30 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 683 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 | ||||
-rw-r--r-- | arch/riscv/boot/dts/thead/th1520.dtsi | 54 |
14 files changed, 924 insertions, 735 deletions
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 222a39d90f85..f80df225f72b 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -100,6 +100,38 @@ &i2c1 { status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDREG"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA25"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD25"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA_REG"; + }; + }; }; &i2c2 { diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi index f35324b9173c..e0ddf8f602c7 100644 --- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi +++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi @@ -54,6 +54,81 @@ dma-noncoherent; interrupt-parent = <&plic>; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g043f-irqc"; + reg = <0 0x110a0000 0 0x20000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH>, + <33 IRQ_TYPE_LEVEL_HIGH>, + <34 IRQ_TYPE_LEVEL_HIGH>, + <35 IRQ_TYPE_LEVEL_HIGH>, + <36 IRQ_TYPE_LEVEL_HIGH>, + <37 IRQ_TYPE_LEVEL_HIGH>, + <38 IRQ_TYPE_LEVEL_HIGH>, + <39 IRQ_TYPE_LEVEL_HIGH>, + <40 IRQ_TYPE_LEVEL_HIGH>, + <476 IRQ_TYPE_LEVEL_HIGH>, + <477 IRQ_TYPE_LEVEL_HIGH>, + <478 IRQ_TYPE_LEVEL_HIGH>, + <479 IRQ_TYPE_LEVEL_HIGH>, + <480 IRQ_TYPE_LEVEL_HIGH>, + <481 IRQ_TYPE_LEVEL_HIGH>, + <482 IRQ_TYPE_LEVEL_HIGH>, + <483 IRQ_TYPE_LEVEL_HIGH>, + <484 IRQ_TYPE_LEVEL_HIGH>, + <485 IRQ_TYPE_LEVEL_HIGH>, + <486 IRQ_TYPE_LEVEL_HIGH>, + <487 IRQ_TYPE_LEVEL_HIGH>, + <488 IRQ_TYPE_LEVEL_HIGH>, + <489 IRQ_TYPE_LEVEL_HIGH>, + <490 IRQ_TYPE_LEVEL_HIGH>, + <491 IRQ_TYPE_LEVEL_HIGH>, + <492 IRQ_TYPE_LEVEL_HIGH>, + <493 IRQ_TYPE_LEVEL_HIGH>, + <494 IRQ_TYPE_LEVEL_HIGH>, + <495 IRQ_TYPE_LEVEL_HIGH>, + <496 IRQ_TYPE_LEVEL_HIGH>, + <497 IRQ_TYPE_LEVEL_HIGH>, + <498 IRQ_TYPE_LEVEL_HIGH>, + <499 IRQ_TYPE_LEVEL_HIGH>, + <500 IRQ_TYPE_LEVEL_HIGH>, + <501 IRQ_TYPE_LEVEL_HIGH>, + <502 IRQ_TYPE_LEVEL_HIGH>, + <503 IRQ_TYPE_LEVEL_HIGH>, + <504 IRQ_TYPE_LEVEL_HIGH>, + <505 IRQ_TYPE_LEVEL_HIGH>, + <506 IRQ_TYPE_LEVEL_HIGH>, + <507 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <66 IRQ_TYPE_EDGE_RISING>, + <67 IRQ_TYPE_EDGE_RISING>, + <68 IRQ_TYPE_EDGE_RISING>, + <69 IRQ_TYPE_EDGE_RISING>, + <70 IRQ_TYPE_EDGE_RISING>, + <71 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; + clocks = <&cpg CPG_MOD R9A07G043_IAX45_CLK>, + <&cpg CPG_MOD R9A07G043_IAX45_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_IAX45_RESETN>; + }; + plic: interrupt-controller@12c00000 { compatible = "renesas,r9a07g043-plic", "andestech,nceplic100"; #interrupt-cells = <2>; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi index 433ab5c6a626..5e808242649e 100644 --- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi @@ -6,19 +6,3 @@ */ #include <arm64/renesas/rzg2ul-smarc-som.dtsi> - -#if (!SW_ET0_EN_N) -ð0 { - phy0: ethernet-phy@7 { - /delete-property/ interrupt-parent; - /delete-property/ interrupts; - }; -}; -#endif - -ð1 { - phy1: ethernet-phy@7 { - /delete-property/ interrupt-parent; - /delete-property/ interrupts; - }; -}; diff --git a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts index 3af9e34b3bc7..cd013588adc0 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts +++ b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts @@ -23,9 +23,15 @@ stdout-path = "serial0:115200n8"; }; - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x3f40000>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + coprocessor_rtos: region@83f40000 { + reg = <0x83f40000 0xc0000>; + no-map; + }; }; }; @@ -33,6 +39,14 @@ clock-frequency = <25000000>; }; +&sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; +}; + &uart0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index 165e9e320a8c..ec9530972ae2 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -7,6 +7,11 @@ / { compatible = "sophgo,cv1800b"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; }; &plic { @@ -16,3 +21,7 @@ &clint { compatible = "sophgo,cv1800b-clint", "thead,c900-clint"; }; + +&clk { + compatible = "sophgo,cv1800-clk"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi index 3e7a942f5c1a..7fa4c1e2d1da 100644 --- a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi @@ -22,3 +22,7 @@ &clint { compatible = "sophgo,cv1812h-clint", "thead,c900-clint"; }; + +&clk { + compatible = "sophgo,cv1810-clk"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi index 2d6f4a4b1e58..891932ae470f 100644 --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -4,6 +4,8 @@ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> */ +#include <dt-bindings/clock/sophgo,cv1800.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -53,6 +55,12 @@ dma-noncoherent; ranges; + clk: clock-controller@3002000 { + reg = <0x03002000 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; + gpio0: gpio@3020000 { compatible = "snps,dw-apb-gpio"; reg = <0x3020000 0x1000>; @@ -125,11 +133,67 @@ }; }; + i2c0: i2c@4000000 { + compatible = "snps,designware-i2c"; + reg = <0x04000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>; + clock-names = "ref", "pclk"; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@4010000 { + compatible = "snps,designware-i2c"; + reg = <0x04010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>; + clock-names = "ref", "pclk"; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@4020000 { + compatible = "snps,designware-i2c"; + reg = <0x04020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>; + clock-names = "ref", "pclk"; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@4030000 { + compatible = "snps,designware-i2c"; + reg = <0x04030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>; + clock-names = "ref", "pclk"; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c4: i2c@4040000 { + compatible = "snps,designware-i2c"; + reg = <0x04040000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>; + clock-names = "ref", "pclk"; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart0: serial@4140000 { compatible = "snps,dw-apb-uart"; reg = <0x04140000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -139,7 +203,8 @@ compatible = "snps,dw-apb-uart"; reg = <0x04150000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -149,7 +214,8 @@ compatible = "snps,dw-apb-uart"; reg = <0x04160000 0x100>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -159,22 +225,78 @@ compatible = "snps,dw-apb-uart"; reg = <0x04170000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; + spi0: spi@4180000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04180000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>; + clock-names = "ssi_clk", "pclk"; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi1: spi@4190000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04190000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>; + clock-names = "ssi_clk", "pclk"; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi2: spi@41a0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041a0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>; + clock-names = "ssi_clk", "pclk"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi3: spi@41b0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>; + clock-names = "ssi_clk", "pclk"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart4: serial@41c0000 { compatible = "snps,dw-apb-uart"; reg = <0x041c0000 0x100>; interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; + sdhci0: mmc@4310000 { + compatible = "sophgo,cv1800b-dwcmshc"; + reg = <0x4310000 0x1000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_AXI4_SD0>, + <&clk CLK_SD0>; + clock-names = "core", "bus"; + status = "disabled"; + }; + plic: interrupt-controller@70000000 { reg = <0x70000000 0x4000000>; interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>; diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 0141504c0f5c..2fa0cd7f31c3 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 9a2e9583af88..7de0732b8eab 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -13,7 +13,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi new file mode 100644 index 000000000000..8ff6ea64f048 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; + + pwmdac_codec: audio-codec { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&pwmdac>; + }; + + codec { + sound-dai = <&pwmdac_codec>; + }; + }; + }; +}; + +&cpus { + timebase-frequency = <4000000>; +}; + +&dvp_clk { + clock-frequency = <74250000>; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&hdmitx0_pixelclk { + clock-frequency = <297000000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&camss { + assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; + assigned-clock-rates = <49500000>, <198000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + camss_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_camss>; + }; + }; + }; +}; + +&csi2rx { + assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; + assigned-clock-rates = <297000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + /* remote MIPI sensor endpoint */ + }; + + port@1 { + reg = <1>; + + csi2rx_to_camss: endpoint { + remote-endpoint = <&camss_from_csi2rx>; + }; + }; + }; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + + axp15060: pmic@36 { + compatible = "x-powers,axp15060"; + reg = <0x36>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + vcc_3v3: dcdc1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1540000>; + regulator-name = "vdd-cpu"; + }; + + emmc_vdd: aldo4 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "emmc_vdd"; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&mmc0 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; + status = "okay"; +}; + +&mmc1 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <4>; + no-sdio; + no-mmc; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "okay"; +}; + +&pwmdac { + pinctrl-names = "default"; + pinctrl-0 = <&pwmdac_pins>; + status = "okay"; +}; + +&qspi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; + cdns,tshsl-ns = <1>; + cdns,tsd2d-ns = <1>; + cdns,tchsh-ns = <1>; + cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0x80000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0x400000>; + }; + reserved-data@600000 { + reg = <0x600000 0xa00000>; + }; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi_dev0: spi@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&sysgpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + mmc0_pins: mmc0-0 { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <PINMUX(64, 0)>, + <PINMUX(65, 0)>, + <PINMUX(66, 0)>, + <PINMUX(67, 0)>, + <PINMUX(68, 0)>, + <PINMUX(69, 0)>, + <PINMUX(70, 0)>, + <PINMUX(71, 0)>, + <PINMUX(72, 0)>, + <PINMUX(73, 0)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + }; + }; + + mmc1_pins: mmc1-0 { + clk-pins { + pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, + GPOEN_SYS_SDIO1_CMD, + GPI_SYS_SDIO1_CMD)>, + <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, + GPOEN_SYS_SDIO1_DATA0, + GPI_SYS_SDIO1_DATA0)>, + <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, + GPOEN_SYS_SDIO1_DATA1, + GPI_SYS_SDIO1_DATA1)>, + <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, + GPOEN_SYS_SDIO1_DATA2, + GPI_SYS_SDIO1_DATA2)>, + <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, + GPOEN_SYS_SDIO1_DATA3, + GPI_SYS_SDIO1_DATA3)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + pwmdac_pins: pwmdac-0 { + pwmdac-pins { + pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, + GPOEN_ENABLE, + GPI_NONE)>, + <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + spi0_pins: spi0-0 { + mosi-pins { + pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + miso-pins { + pinmux = <GPIOMUX(53, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_SPI0_RXD)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + sck-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, + GPOEN_ENABLE, + GPI_SYS_SPI0_CLK)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + ss-pins { + pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, + GPOEN_ENABLE, + GPI_SYS_SPI0_FSS)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&U74_1 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_2 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_3 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_4 { + cpu-supply = <&vdd_cpu>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts new file mode 100644 index 000000000000..fa0eac78e0ba --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Milk-V Mars"; + compatible = "milkv,mars", "starfive,jh7110"; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 45b58b6f3df8..9d70f21c86fc 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -5,188 +5,11 @@ */ /dts-v1/; -#include "jh7110.dtsi" -#include "jh7110-pinfunc.h" -#include <dt-bindings/gpio/gpio.h> +#include "jh7110-common.dtsi" / { aliases { - ethernet0 = &gmac0; ethernet1 = &gmac1; - i2c0 = &i2c0; - i2c2 = &i2c2; - i2c5 = &i2c5; - i2c6 = &i2c6; - mmc0 = &mmc0; - mmc1 = &mmc1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <4000000>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0x1 0x0>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; - priority = <224>; - }; - - pwmdac_codec: pwmdac-codec { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - sound-pwmdac { - compatible = "simple-audio-card"; - simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; - #address-cells = <1>; - #size-cells = <0>; - - simple-audio-card,dai-link@0 { - reg = <0>; - format = "left_j"; - bitclock-master = <&sndcpu0>; - frame-master = <&sndcpu0>; - - sndcpu0: cpu { - sound-dai = <&pwmdac>; - }; - - codec { - sound-dai = <&pwmdac_codec>; - }; - }; - }; -}; - -&dvp_clk { - clock-frequency = <74250000>; -}; - -&gmac0_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac0_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac1_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac1_rmii_refin { - clock-frequency = <50000000>; -}; - -&hdmitx0_pixelclk { - clock-frequency = <297000000>; -}; - -&i2srx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2srx_lrck_ext { - clock-frequency = <192000>; -}; - -&i2stx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2stx_lrck_ext { - clock-frequency = <192000>; -}; - -&mclk_ext { - clock-frequency = <12288000>; -}; - -&osc { - clock-frequency = <24000000>; -}; - -&rtc_osc { - clock-frequency = <32768>; -}; - -&tdm_ext { - clock-frequency = <49152000>; -}; - -&camss { - assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, - <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; - assigned-clock-rates = <49500000>, <198000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - camss_from_csi2rx: endpoint { - remote-endpoint = <&csi2rx_to_camss>; - }; - }; - }; -}; - -&csi2rx { - assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; - assigned-clock-rates = <297000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - /* remote MIPI sensor endpoint */ - }; - - port@1 { - reg = <1>; - - csi2rx_to_camss: endpoint { - remote-endpoint = <&camss_from_csi2rx>; - }; - }; - }; -}; - -&gmac0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; }; }; @@ -206,510 +29,6 @@ }; }; -&i2c0 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&i2c5 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - status = "okay"; - - axp15060: pmic@36 { - compatible = "x-powers,axp15060"; - reg = <0x36>; - interrupts = <0>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - vcc_3v3: dcdc1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1540000>; - regulator-name = "vdd-cpu"; - }; - - emmc_vdd: aldo4 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "emmc_vdd"; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - status = "okay"; -}; - -&i2srx { - pinctrl-names = "default"; - pinctrl-0 = <&i2srx_pins>; - status = "okay"; -}; - -&i2stx0 { - pinctrl-names = "default"; - pinctrl-0 = <&mclk_ext_pins>; - status = "okay"; -}; - -&i2stx1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2stx1_pins>; - status = "okay"; -}; - &mmc0 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; non-removable; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_vdd>; - status = "okay"; -}; - -&mmc1 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <4>; - no-sdio; - no-mmc; - broken-cd; - cap-sd-highspeed; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "okay"; -}; - -&pwmdac { - pinctrl-names = "default"; - pinctrl-0 = <&pwmdac_pins>; - status = "okay"; -}; - -&qspi { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - nor_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - cdns,read-delay = <5>; - spi-max-frequency = <12000000>; - cdns,tshsl-ns = <1>; - cdns,tsd2d-ns = <1>; - cdns,tchsh-ns = <1>; - cdns,tslch-ns = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - spl@0 { - reg = <0x0 0x80000>; - }; - uboot-env@f0000 { - reg = <0xf0000 0x10000>; - }; - uboot@100000 { - reg = <0x100000 0x400000>; - }; - reserved-data@600000 { - reg = <0x600000 0xa00000>; - }; - }; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi_dev0: spi@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&sysgpio { - i2c0_pins: i2c0-0 { - i2c-pins { - pinmux = <GPIOMUX(57, GPOUT_LOW, - GPOEN_SYS_I2C0_CLK, - GPI_SYS_I2C0_CLK)>, - <GPIOMUX(58, GPOUT_LOW, - GPOEN_SYS_I2C0_DATA, - GPI_SYS_I2C0_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c2_pins: i2c2-0 { - i2c-pins { - pinmux = <GPIOMUX(3, GPOUT_LOW, - GPOEN_SYS_I2C2_CLK, - GPI_SYS_I2C2_CLK)>, - <GPIOMUX(2, GPOUT_LOW, - GPOEN_SYS_I2C2_DATA, - GPI_SYS_I2C2_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c5_pins: i2c5-0 { - i2c-pins { - pinmux = <GPIOMUX(19, GPOUT_LOW, - GPOEN_SYS_I2C5_CLK, - GPI_SYS_I2C5_CLK)>, - <GPIOMUX(20, GPOUT_LOW, - GPOEN_SYS_I2C5_DATA, - GPI_SYS_I2C5_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c6_pins: i2c6-0 { - i2c-pins { - pinmux = <GPIOMUX(16, GPOUT_LOW, - GPOEN_SYS_I2C6_CLK, - GPI_SYS_I2C6_CLK)>, - <GPIOMUX(17, GPOUT_LOW, - GPOEN_SYS_I2C6_DATA, - GPI_SYS_I2C6_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2srx_pins: i2srx-0 { - clk-sd-pins { - pinmux = <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_LRCK)>, - <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_LRCK)>, - <GPIOMUX(61, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_SDIN0)>; - input-enable; - }; - }; - - i2stx1_pins: i2stx1-0 { - sd-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - }; - }; - - mclk_ext_pins: mclk-ext-0 { - mclk-ext-pins { - pinmux = <GPIOMUX(4, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_MCLK_EXT)>; - input-enable; - }; - }; - - mmc0_pins: mmc0-0 { - rst-pins { - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - }; - }; - - mmc1_pins: mmc1-0 { - clk-pins { - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, - GPOEN_SYS_SDIO1_CMD, - GPI_SYS_SDIO1_CMD)>, - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, - GPOEN_SYS_SDIO1_DATA0, - GPI_SYS_SDIO1_DATA0)>, - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, - GPOEN_SYS_SDIO1_DATA1, - GPI_SYS_SDIO1_DATA1)>, - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, - GPOEN_SYS_SDIO1_DATA2, - GPI_SYS_SDIO1_DATA2)>, - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, - GPOEN_SYS_SDIO1_DATA3, - GPI_SYS_SDIO1_DATA3)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - - pwmdac_pins: pwmdac-0 { - pwmdac-pins { - pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, - GPOEN_ENABLE, - GPI_NONE)>, - <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - pwm_pins: pwm-0 { - pwm-pins { - pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, - GPOEN_SYS_PWM0_CHANNEL0, - GPI_NONE)>, - <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, - GPOEN_SYS_PWM0_CHANNEL1, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - spi0_pins: spi0-0 { - mosi-pins { - pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - miso-pins { - pinmux = <GPIOMUX(53, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_SPI0_RXD)>; - bias-pull-up; - input-enable; - input-schmitt-enable; - }; - - sck-pins { - pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, - GPOEN_ENABLE, - GPI_SYS_SPI0_CLK)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - ss-pins { - pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, - GPOEN_ENABLE, - GPI_SYS_SPI0_FSS)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - }; - - tdm_pins: tdm-0 { - tx-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(61, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_RXD)>; - input-enable; - }; - - sync-pins { - pinmux = <GPIOMUX(63, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_SYNC)>; - input-enable; - }; - - pcmclk-pins { - pinmux = <GPIOMUX(38, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_CLK)>; - input-enable; - }; - }; - - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; -}; - -&tdm { - pinctrl-names = "default"; - pinctrl-0 = <&tdm_pins>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; - status = "okay"; -}; - -&U74_1 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_2 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_3 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_4 { - cpu-supply = <&vdd_cpu>; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 4a5708f7fcf7..18047195c600 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -15,7 +15,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 8b915e206f3a..d2fa25839012 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -193,6 +193,33 @@ status = "disabled"; }; + emmc: mmc@ffe7080000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7080000 0x0 0x10000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio0: mmc@ffe7090000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7090000 0x0 0x10000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio1: mmc@ffe70a0000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe70a0000 0x0 0x10000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + uart1: serial@ffe7f00000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f00000 0x0 0x100>; @@ -311,33 +338,6 @@ status = "disabled"; }; - emmc: mmc@ffe7080000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe7080000 0x0 0x10000>; - interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - - sdio0: mmc@ffe7090000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe7090000 0x0 0x10000>; - interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - - sdio1: mmc@ffe70a0000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe70a0000 0x0 0x10000>; - interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - timer0: timer@ffefc32000 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32000 0x0 0x14>; |