diff options
Diffstat (limited to 'arch/s390/boot/head.S')
| -rw-r--r-- | arch/s390/boot/head.S | 366 |
1 files changed, 148 insertions, 218 deletions
diff --git a/arch/s390/boot/head.S b/arch/s390/boot/head.S index 666692429db0..3f79b9efb803 100644 --- a/arch/s390/boot/head.S +++ b/arch/s390/boot/head.S @@ -27,234 +27,181 @@ #include <asm/page.h> #include <asm/ptrace.h> #include <asm/sclp.h> - -#define ARCH_OFFSET 4 +#include "boot.h" #define EP_OFFSET 0x10008 #define EP_STRING "S390EP" +#define IPL_BS 0x730 __HEAD - -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0x200 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org __LC_RST_NEW_PSW # 0x1a0 - .quad 0,iplstart - .org __LC_EXT_NEW_PSW # 0x1b0 - .quad 0x0002000180000000,0x1b0 # disabled wait - .org __LC_PGM_NEW_PSW # 0x1d0 - .quad 0x0000000180000000,startup_pgm_check_handler - .org __LC_IO_NEW_PSW # 0x1f0 - .quad 0x0002000180000000,0x1f0 # disabled wait - - .org 0x200 - +ipl_start: + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + lhi %r1,2 # mode 2 = esame (dump) + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit addressing mode + lgh %r1,__LC_SUBCHANNEL_ID # test if subchannel number + brctg %r1,.Lnoload # is valid + llgf %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number + lghi %r2,IPL_BS # load start address + bras %r14,.Lloader # load rest of ipl image + larl %r12,parmarea # pointer to parameter area + stg %r1,IPL_DEVICE-PARMAREA(%r12) # save ipl device number +# +# load parameter file from ipl device +# +.Lagain1: + larl %r2,_end # ramdisk loc. is temp + bras %r14,.Lloader # load parameter file + ltgr %r2,%r2 # got anything ? + jz .Lnopf + lg %r3,MAX_COMMAND_LINE_SIZE-PARMAREA(%r12) + aghi %r3,-1 + clgr %r2,%r3 + jl .Lnotrunc + lgr %r2,%r3 +.Lnotrunc: + larl %r4,_end + larl %r13,.L_hdr + clc 0(3,%r4),0(%r13) # if it is HDRx + jz .Lagain1 # skip dataset header + larl %r13,.L_eof + clc 0(3,%r4),0(%r13) # if it is EOFx + jz .Lagain1 # skip dateset trailer + lgr %r5,%r2 + la %r6,COMMAND_LINE-PARMAREA(%r12) + lgr %r7,%r2 + aghi %r7,1 + mvcl %r6,%r4 +.Lnopf: +# +# load ramdisk from ipl device +# +.Lagain2: + larl %r2,_end # addr of ramdisk + stg %r2,INITRD_START-PARMAREA(%r12) + bras %r14,.Lloader # load ramdisk + stg %r2,INITRD_SIZE-PARMAREA(%r12) # store size of rd + ltgr %r2,%r2 + jnz .Lrdcont + stg %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found +.Lrdcont: + larl %r2,_end + larl %r13,.L_hdr # skip HDRx and EOFx + clc 0(3,%r2),0(%r13) + jz .Lagain2 + larl %r13,.L_eof + clc 0(3,%r2),0(%r13) + jz .Lagain2 +# +# reset files in VM reader +# + larl %r13,.Lcpuid + stidp 0(%r13) # store cpuid + tm 0(%r13),0xff # running VM ? + jno .Lnoreset + larl %r2,.Lreset + lghi %r3,26 + diag %r2,%r3,8 + larl %r5,.Lirb + stsch 0(%r5) # check if irq is pending + tm 30(%r5),0x0f # by verifying if any of the + jnz .Lwaitforirq # activity or status control + tm 31(%r5),0xff # bits is set in the schib + jz .Lnoreset +.Lwaitforirq: + bras %r14,.Lirqwait # wait for IO interrupt + c %r1,__LC_SUBCHANNEL_ID # compare subchannel number + jne .Lwaitforirq + larl %r5,.Lirb + tsch 0(%r5) +.Lnoreset: + j .Lnoload +# +# everything loaded, go for it +# +.Lnoload: + jg startup # # subroutine to wait for end I/O # .Lirqwait: - mvc __LC_IO_NEW_PSW(16),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw + larl %r13,.Lnewpswmask # set up IO interrupt psw + mvc __LC_IO_NEW_PSW(8),0(%r13) + stg %r14,__LC_IO_NEW_PSW+8 + larl %r13,.Lwaitpsw + lpswe 0(%r13) .Lioint: - br %r14 - .align 8 -.Lnewpsw: - .quad 0x0000000080000000,.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - # # subroutine for loading cards from the reader # .Lloader: - la %r4,0(%r14) - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 + lgr %r4,%r14 + larl %r3,.Lorb # r2 = address of orb into r2 + larl %r5,.Lirb # r4 = address of irb + larl %r6,.Lccws + lghi %r7,20 .Linit: st %r2,4(%r6) # initialize CCW data addresses la %r2,0x50(%r2) la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 + brctg %r7,.Linit + larl %r13,.Lcr6 + lctlg %c6,%c6,0(%r13) + xgr %r2,%r2 .Lldlp: ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr + jnz .Llderr .Lwait4irq: - bas %r14,.Lirqwait + bras %r14,.Lirqwait c %r1,__LC_SUBCHANNEL_ID # compare subchannel number - bne .Lwait4irq + jne .Lwait4irq tsch 0(%r5) - - slr %r0,%r0 + xgr %r0,%r0 ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - + cghi %r0,8 # channel end ? + je .Lcont + cghi %r0,12 # channel end + device end ? + je .Lcont + llgf %r0,4(%r5) + sgf %r0,8(%r3) # r0/8 = number of ccws executed + mghi %r0,10 # *10 = number of bytes in ccws + llgh %r3,10(%r5) # get residual count + sgr %r0,%r3 # #ccws*80-residual=#bytes read + agr %r2,%r0 br %r4 # r2 contains the total size - .Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 + aghi %r2,0x640 # add 0x640 to total size + larl %r6,.Lccws + lghi %r7,20 .Lincr: l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 + aghi %r0,0x640 st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp + aghi %r6,8 + brctg %r7,.Lincr + j .Lldlp .Llderr: - lpsw .Lcrash + larl %r13,.Lcrash + lpsw 0(%r13) .align 8 +.Lwaitpsw: + .quad 0x0202000180000000,.Lioint +.Lnewpswmask: + .quad 0x0000000180000000 + .align 8 .Lorb: .long 0x00000000,0x0080ff00,.Lccws .Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 + .align 8 +.Lcr6: .quad 0x00000000ff000000 .align 8 .Lcrash:.long 0x000a0000,0x00000000 - .align 8 .Lccws: .rept 19 .long 0x02600050,0x00000000 .endr .long 0x02200050,0x00000000 - -iplstart: - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - lhi %r1,2 # mode 2 = esame (dump) - sigp %r1,%r0,0x12 # switch to esame mode - bras %r13,0f - .fill 16,4,0x0 -0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs - sam31 # switch to 31 bit addressing mode - lh %r1,__LC_SUBCHANNEL_ID # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number - -# -# load parameter file from ipl device -# -.Lagain1: - l %r2,.Linitrd # ramdisk loc. is temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - l %r3,MAX_COMMAND_LINE_SIZE+ARCH_OFFSET-PARMAREA(%r12) - ahi %r3,-1 - clr %r2,%r3 - bl .Lnotrunc - lr %r2,%r3 -.Lnotrunc: - l %r4,.Linitrd - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - - lr %r5,%r2 - la %r6,COMMAND_LINE-PARMAREA(%r12) - lr %r7,%r2 - ahi %r7,1 - mvcl %r6,%r4 -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,.Linitrd # addr of ramdisk - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found -.Lrdcont: - l %r2,.Linitrd - - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -# -# reset files in VM reader -# - stidp .Lcpuid # store cpuid - tm .Lcpuid,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - bas %r14,.Lirqwait # wait for IO interrupt - c %r1,__LC_SUBCHANNEL_ID # compare subchannel number - bne .Lwaitforirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Linitrd:.long _end # default address of initrd -.Lparm: .long PARMAREA -.Lstartup: .long startup .Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" @@ -268,10 +215,10 @@ iplstart: # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # - .org STARTUP_NORMAL_OFFSET + .org STARTUP_NORMAL_OFFSET - IPL_START SYM_CODE_START(startup) j startup_normal - .org EP_OFFSET + .org EP_OFFSET - IPL_START # # This is a list of s390 kernel entry points. At address 0x1000f the number of # valid entry points is stored. @@ -283,7 +230,7 @@ SYM_CODE_START(startup) # # kdump startup-code, running in 64 bit absolute addressing mode # - .org STARTUP_KDUMP_OFFSET + .org STARTUP_KDUMP_OFFSET - IPL_START j startup_kdump SYM_CODE_END(startup) SYM_CODE_START_LOCAL(startup_normal) @@ -295,20 +242,23 @@ SYM_CODE_START_LOCAL(startup_normal) .fill 16,4,0x0 0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs sam64 # switch to 64 bit addressing mode - basr %r13,0 # get base -.LPG0: - mvc __LC_EXT_NEW_PSW(16),.Lext_new_psw-.LPG0(%r13) - mvc __LC_PGM_NEW_PSW(16),.Lpgm_new_psw-.LPG0(%r13) - mvc __LC_IO_NEW_PSW(16),.Lio_new_psw-.LPG0(%r13) + larl %r13,.Lext_new_psw + mvc __LC_EXT_NEW_PSW(16),0(%r13) + larl %r13,.Lpgm_new_psw + mvc __LC_PGM_NEW_PSW(16),0(%r13) + larl %r13,.Lio_new_psw + mvc __LC_IO_NEW_PSW(16),0(%r13) xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 xc 0xe00(256),0xe00 xc 0xf00(256),0xf00 - lctlg %c0,%c15,.Lctl-.LPG0(%r13) # load control registers + larl %r13,.Lctl + lctlg %c0,%c15,0(%r13) # load control registers stcke __LC_BOOT_CLOCK mvc __LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1 - spt 6f-.LPG0(%r13) - mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) + larl %r13,6f + spt 0(%r13) + mvc __LC_LAST_UPDATE_TIMER(8),0(%r13) larl %r15,_stack_end-STACK_FRAME_OVERHEAD brasl %r14,sclp_early_setup_buffer brasl %r14,verify_facilities @@ -368,23 +318,3 @@ SYM_CODE_START_LOCAL(startup_pgm_check_handler) lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r8) lpswe __LC_RETURN_PSW # disabled wait SYM_CODE_END(startup_pgm_check_handler) - -# -# params at 10400 (setup.h) -# Must be keept in sync with struct parmarea in setup.h -# - .org PARMAREA -SYM_DATA_START(parmarea) - .quad 0 # IPL_DEVICE - .quad 0 # INITRD_START - .quad 0 # INITRD_SIZE - .quad 0 # OLDMEM_BASE - .quad 0 # OLDMEM_SIZE - .quad kernel_version # points to kernel version string - .quad COMMAND_LINE_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org PARMAREA+__PARMAREA_SIZE -SYM_DATA_END(parmarea) |