summaryrefslogtreecommitdiff
path: root/arch/s390/include/asm/pgtable.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/s390/include/asm/pgtable.h')
-rw-r--r--arch/s390/include/asm/pgtable.h167
1 files changed, 72 insertions, 95 deletions
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 989cfae9e202..fc642399b489 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -12,12 +12,9 @@
#define _ASM_S390_PGTABLE_H
/*
- * The Linux memory management assumes a three-level page table setup. For
- * s390 31 bit we "fold" the mid level into the top-level page table, so
- * that we physically have the same two-level page table as the s390 mmu
- * expects in 31 bit mode. For s390 64 bit we use three of the five levels
- * the hardware provides (region first and region second tables are not
- * used).
+ * The Linux memory management assumes a three-level page table setup.
+ * For s390 64 bit we use up to four of the five levels the hardware
+ * provides (region first tables are not used).
*
* The "pgd_xxx()" functions are trivial for a folded two-level
* setup: the pgd is never bad, and a pmd always exists (as it's folded
@@ -101,8 +98,8 @@ extern unsigned long zero_page_mask;
#ifndef __ASSEMBLY__
/*
- * The vmalloc and module area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc and modules.
+ * The vmalloc and module area will always be on the topmost area of the
+ * kernel mapping. We reserve 128GB (64bit) for vmalloc and modules.
* On 64 bit kernels we have a 2GB area at the top of the vmalloc area where
* modules will reside. That makes sure that inter module branches always
* happen without trampolines and in addition the placement within a 2GB frame
@@ -131,38 +128,6 @@ static inline int is_module_addr(void *addr)
}
/*
- * A 31 bit pagetable entry of S390 has following format:
- * | PFRA | | OS |
- * 0 0IP0
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Page-Invalid Bit: Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 31 bit segmenttable entry of S390 has following format:
- * | P-table origin | |PTL
- * 0 IC
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Segment-Invalid Bit: Segment is not available for address-translation
- * C Common-Segment Bit: Segment is not private (PoP 3-30)
- * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256)
- *
- * The 31 bit segmenttable origin of S390 has following format:
- *
- * |S-table origin | | STL |
- * X **GPS
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit: *
- * P Private-Space Bit: Segment is not private (PoP 3-30)
- * S Storage-Alteration:
- * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048)
- *
* A 64 bit pagetable entry of S390 has following format:
* | PFRA |0IPC| OS |
* 0000000000111111111122222222223333333333444444444455555555556666
@@ -220,7 +185,6 @@ static inline int is_module_addr(void *addr)
/* Software bits in the page table entry */
#define _PAGE_PRESENT 0x001 /* SW pte present bit */
-#define _PAGE_TYPE 0x002 /* SW pte type bit */
#define _PAGE_YOUNG 0x004 /* SW pte young bit */
#define _PAGE_DIRTY 0x008 /* SW pte dirty bit */
#define _PAGE_READ 0x010 /* SW pte read bit */
@@ -240,31 +204,34 @@ static inline int is_module_addr(void *addr)
* table lock held.
*
* The following table gives the different possible bit combinations for
- * the pte hardware and software bits in the last 12 bits of a pte:
+ * the pte hardware and software bits in the last 12 bits of a pte
+ * (. unassigned bit, x don't care, t swap type):
*
* 842100000000
* 000084210000
* 000000008421
- * .IR...wrdytp
- * empty .10...000000
- * swap .10...xxxx10
- * file .11...xxxxx0
- * prot-none, clean, old .11...000001
- * prot-none, clean, young .11...000101
- * prot-none, dirty, old .10...001001
- * prot-none, dirty, young .10...001101
- * read-only, clean, old .11...010001
- * read-only, clean, young .01...010101
- * read-only, dirty, old .11...011001
- * read-only, dirty, young .01...011101
- * read-write, clean, old .11...110001
- * read-write, clean, young .01...110101
- * read-write, dirty, old .10...111001
- * read-write, dirty, young .00...111101
+ * .IR.uswrdy.p
+ * empty .10.00000000
+ * swap .11..ttttt.0
+ * prot-none, clean, old .11.xx0000.1
+ * prot-none, clean, young .11.xx0001.1
+ * prot-none, dirty, old .10.xx0010.1
+ * prot-none, dirty, young .10.xx0011.1
+ * read-only, clean, old .11.xx0100.1
+ * read-only, clean, young .01.xx0101.1
+ * read-only, dirty, old .11.xx0110.1
+ * read-only, dirty, young .01.xx0111.1
+ * read-write, clean, old .11.xx1100.1
+ * read-write, clean, young .01.xx1101.1
+ * read-write, dirty, old .10.xx1110.1
+ * read-write, dirty, young .00.xx1111.1
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*
- * pte_present is true for the bit pattern .xx...xxxxx1, (pte & 0x001) == 0x001
- * pte_none is true for the bit pattern .10...xxxx00, (pte & 0x603) == 0x400
- * pte_swap is true for the bit pattern .10...xxxx10, (pte & 0x603) == 0x402
+ * pte_none is true for the bit pattern .10.00000000, pte == 0x400
+ * pte_swap is true for the bit pattern .11..ooooo.0, (pte & 0x201) == 0x200
+ * pte_present is true for the bit pattern .xx.xxxxxx.1, (pte & 0x001) == 0x001
*/
/* Bits in the segment/region table address-space-control-element */
@@ -335,6 +302,8 @@ static inline int is_module_addr(void *addr)
* read-write, dirty, young 11..0...0...11
* The segment table origin is used to distinguish empty (origin==0) from
* read-write, old segment table entries (origin!=0)
+ * HW-bits: R read-only, I invalid
+ * SW-bits: y young, d dirty, r read, w write
*/
#define _SEGMENT_ENTRY_SPLIT_BIT 11 /* THP splitting bit number */
@@ -423,6 +392,15 @@ static inline int mm_has_pgste(struct mm_struct *mm)
return 0;
}
+static inline int mm_alloc_pgste(struct mm_struct *mm)
+{
+#ifdef CONFIG_PGSTE
+ if (unlikely(mm->context.alloc_pgste))
+ return 1;
+#endif
+ return 0;
+}
+
/*
* In the case that a guest uses storage keys
* faults should no longer be backed by zero pages
@@ -582,10 +560,9 @@ static inline int pte_none(pte_t pte)
static inline int pte_swap(pte_t pte)
{
- /* Bit pattern: (pte & 0x603) == 0x402 */
- return (pte_val(pte) & (_PAGE_INVALID | _PAGE_PROTECT |
- _PAGE_TYPE | _PAGE_PRESENT))
- == (_PAGE_INVALID | _PAGE_TYPE);
+ /* Bit pattern: (pte & 0x201) == 0x200 */
+ return (pte_val(pte) & (_PAGE_PROTECT | _PAGE_PRESENT))
+ == _PAGE_PROTECT;
}
static inline int pte_special(pte_t pte)
@@ -1586,51 +1563,51 @@ static inline int has_transparent_hugepage(void)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
- * 31 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bits 21, 22, 30 and 31 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 1-19 and bits 24-29 to store type and offset.
- * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
- * plus 24 for the offset.
- * 0| offset |0110|o|type |00|
- * 0 0000000001111111111 2222 2 22222 33
- * 0 1234567890123456789 0123 4 56789 01
- *
* 64 bit swap entry format:
* A page-table entry has some bits we have to treat in a special way.
* Bits 52 and bit 55 have to be zero, otherwise an specification
* exception will occur instead of a page translation exception. The
* specifiation exception has the bad habit not to store necessary
* information in the lowcore.
- * Bits 53, 54, 62 and 63 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 0-51 and bits 56-61 to store type and offset.
- * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
- * plus 56 for the offset.
- * | offset |0110|o|type |00|
- * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66
- * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ * Bits 54 and 63 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
+ * This leaves the bits 0-51 and bits 56-62 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
+ * for the offset.
+ * | offset |01100|type |00|
+ * |0000000000111111111122222222223333333333444444444455|55555|55566|66|
+ * |0123456789012345678901234567890123456789012345678901|23456|78901|23|
*/
-#define __SWP_OFFSET_MASK (~0UL >> 11)
+#define __SWP_OFFSET_MASK ((1UL << 52) - 1)
+#define __SWP_OFFSET_SHIFT 12
+#define __SWP_TYPE_MASK ((1UL << 5) - 1)
+#define __SWP_TYPE_SHIFT 2
static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
{
pte_t pte;
- offset &= __SWP_OFFSET_MASK;
- pte_val(pte) = _PAGE_INVALID | _PAGE_TYPE | ((type & 0x1f) << 2) |
- ((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+
+ pte_val(pte) = _PAGE_INVALID | _PAGE_PROTECT;
+ pte_val(pte) |= (offset & __SWP_OFFSET_MASK) << __SWP_OFFSET_SHIFT;
+ pte_val(pte) |= (type & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT;
return pte;
}
-#define __swp_type(entry) (((entry).val >> 2) & 0x1f)
-#define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1))
-#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+static inline unsigned long __swp_type(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK;
+}
+
+static inline unsigned long __swp_offset(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK;
+}
+
+static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
+{
+ return (swp_entry_t) { pte_val(mk_swap_pte(type, offset)) };
+}
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })