summaryrefslogtreecommitdiff
path: root/arch/sh/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/Kconfig')
-rw-r--r--arch/sh/Kconfig441
1 files changed, 228 insertions, 213 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 038179ecf6a9..d8ed6676ae86 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,8 +55,21 @@ config GENERIC_TIME
config GENERIC_CLOCKEVENTS
def_bool n
+config SYS_SUPPORTS_PM
+ bool
+
config SYS_SUPPORTS_APM_EMULATION
bool
+ select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+ bool
+
+config SYS_SUPPORTS_NUMA
+ bool
+
+config SYS_SUPPORTS_PCI
+ bool
config ARCH_MAY_HAVE_PC_FDC
bool
@@ -81,24 +94,146 @@ source "init/Kconfig"
menu "System type"
-config SOLUTION_ENGINE
- bool
+source "arch/sh/mm/Kconfig"
+
+menu "Processor features"
choice
- prompt "SuperH system type"
- default SH_UNKNOWN
+ prompt "Endianess selection"
+ default CPU_LITTLE_ENDIAN
+ help
+ Some SuperH machines can be configured for either little or big
+ endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+ bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+ bool "Big Endian"
+
+endchoice
+
+config SH_FPU
+ bool "FPU support"
+ depends on CPU_SH4
+ default y
+ help
+ Selecting this option will enable support for SH processors that
+ have FPU units (ie, SH77xx).
+
+ This option must be set in order to enable the FPU.
+
+config SH_FPU_EMU
+ bool "FPU emulation support"
+ depends on !SH_FPU && EXPERIMENTAL
+ default n
+ help
+ Selecting this option will enable support for software FPU emulation.
+ Most SH-3 users will want to say Y here, whereas most SH-4 users will
+ want to say N.
+
+config SH_DSP
+ bool "DSP support"
+ default y if SH4AL_DSP || !CPU_SH4
+ default n
+ help
+ Selecting this option will enable support for SH processors that
+ have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
+
+ This option must be set in order to enable the DSP.
+
+config SH_ADC
+ bool "ADC support"
+ depends on CPU_SH3
+ default y
+ help
+ Selecting this option will allow the Linux kernel to use SH3 on-chip
+ ADC module.
+
+ If unsure, say N.
+
+config SH_STORE_QUEUES
+ bool "Support for Store Queues"
+ depends on CPU_SH4
+ help
+ Selecting this option will enable an in-kernel API for manipulating
+ the store queues integrated in the SH-4 processors.
+
+config SPECULATIVE_EXECUTION
+ bool "Speculative subroutine return"
+ depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+ help
+ This enables support for a speculative instruction fetch for
+ subroutine return. There are various pitfalls associated with
+ this, as outlined in the SH7780 hardware manual.
+
+ If unsure, say N.
+
+config CPU_HAS_INTEVT
+ bool
+
+config CPU_HAS_PINT_IRQ
+ bool
+
+config CPU_HAS_MASKREG_IRQ
+ bool
+
+config CPU_HAS_INTC2_IRQ
+ bool
+
+config CPU_HAS_IPR_IRQ
+ bool
+
+config CPU_HAS_SR_RB
+ bool "CPU has SR.RB"
+ depends on CPU_SH3 || CPU_SH4
+ default y
+ help
+ This will enable the use of SR.RB register bank usage. Processors
+ that are lacking this bit must have another method in place for
+ accomplishing what is taken care of by the banked registers.
+
+ See <file:Documentation/sh/register-banks.txt> for further
+ information on SR.RB and register banking in the kernel in general.
+
+config CPU_HAS_PTEA
+ bool
+
+endmenu
+
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
help
Select SolutionEngine if configuring for a Hitachi SH7709
or SH7750 evaluation board.
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7722
+ depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
@@ -106,7 +241,7 @@ config SH_7722_SOLUTION_ENGINE
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7751
+ depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
@@ -114,7 +249,8 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
@@ -122,7 +258,7 @@ config SH_7780_SOLUTION_ENGINE
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7300
+ depends on CPU_SUBTYPE_SH7300
help
Select 7300 SolutionEngine if configuring for a Hitachi
SH7300(SH-Mobile V) evaluation board.
@@ -130,22 +266,22 @@ config SH_7300_SOLUTION_ENGINE
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7343
+ depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_73180_SOLUTION_ENGINE
- bool "SolutionEngine73180"
+ bool "SolutionEngine73180"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH73180
+ depends on CPU_SUBTYPE_SH73180
help
Select 73180 SolutionEngine if configuring for a Hitachi
SH73180(SH-Mobile 3) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
@@ -153,20 +289,17 @@ config SH_7751_SYSTEMH
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
-config SH_SATURN
- bool "Saturn"
- select CPU_SUBTYPE_SH7604
- help
- Select Saturn if configuring for a SEGA Saturn.
-
config SH_DREAMCAST
bool "Dreamcast"
- select CPU_SUBTYPE_SH7091
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at
@@ -175,6 +308,7 @@ config SH_DREAMCAST
config SH_MPC1211
bool "Interface MPC1211"
+ depends on CPU_SUBTYPE_SH7751 && BROKEN
help
CTP/PCI-SH02 is a CPU module computer that is produced
by Interface Corporation.
@@ -182,6 +316,8 @@ config SH_MPC1211
config SH_SH03
bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751 && BROKEN
+ select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
@@ -189,7 +325,8 @@ config SH_SH03
config SH_SECUREEDGE5410
bool "SecureEdge5410"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
@@ -197,246 +334,76 @@ config SH_SECUREEDGE5410
config SH_HS7751RVOIP
bool "HS7751RVOIP"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
help
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
config SH_7710VOIPGW
bool "SH7710-VOIP-GW"
- select CPU_SUBTYPE_SH7710
+ depends on CPU_SUBTYPE_SH7710
help
Select this option to build a kernel for the SH7710 based
VOIP GW.
config SH_RTS7751R2D
bool "RTS7751R2D"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_HIGHLANDER
bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
config SH_EDOSK7705
bool "EDOSK7705"
- select CPU_SUBTYPE_SH7705
+ depends on CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
- select CPU_SUBTYPE_SH4_202
+ depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
- select CPU_SUBTYPE_SH7706
+ depends on CPU_SUBTYPE_SH7706
help
Select SHMIN if configuring for the SHMIN board.
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
config SH_LBOX_RE2
bool "L-BOX RE2"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-config SH_UNKNOWN
- bool "BareCPU"
- help
- "Bare CPU" aka "unknown" means an SH-based system which is not one
- of the specific ones mentioned above, which means you need to enter
- all sorts of stuff like CONFIG_MEMORY_START because the config
- system doesn't already know what it is. You get a machine vector
- without any platform-specific code in it, so things like the RTC may
- not work.
-
- This option is for the early stages of porting to a new machine.
-
-endchoice
+endmenu
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/mm/Kconfig"
-
-config CF_ENABLER
- bool "Compact Flash Enabler support"
- depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
- ---help---
- Compact Flash is a small, removable mass storage device introduced
- in 1994 originally as a PCMCIA device. If you say `Y' here, you
- compile in support for Compact Flash devices directly connected to
- a SuperH processor. A Compact Flash FAQ is available at
- <http://www.compactflash.org/faqs/faq.htm>.
-
- If your board has "Directly Connected" CompactFlash at area 5 or 6,
- you may want to enable this option. Then, you can use CF as
- primary IDE drive (only tested for SanDisk).
-
- If in doubt, select 'N'.
-
-choice
- prompt "Compact Flash Connection Area"
- depends on CF_ENABLER
- default CF_AREA6
-
-config CF_AREA5
- bool "Area5"
- help
- If your board has "Directly Connected" CompactFlash, You should
- select the area where your CF is connected to.
-
- - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
- - "Area6" if it is connected to Area 6 (0x18000000)
-
- "Area6" will work for most boards.
-
-config CF_AREA6
- bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
- hex
- depends on CF_ENABLER
- default "0xb8000000" if CF_AREA6
- default "0xb4000000" if CF_AREA5
-
-menu "Processor features"
-
-choice
- prompt "Endianess selection"
- default CPU_LITTLE_ENDIAN
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
-
-config CPU_BIG_ENDIAN
- bool "Big Endian"
-
-endchoice
-
-config SH_FPU
- bool "FPU support"
- depends on !CPU_SH3
- default y
- help
- Selecting this option will enable support for SH processors that
- have FPU units (ie, SH77xx).
-
- This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
- bool "FPU emulation support"
- depends on !SH_FPU && EXPERIMENTAL
- default n
- help
- Selecting this option will enable support for software FPU emulation.
- Most SH-3 users will want to say Y here, whereas most SH-4 users will
- want to say N.
-
-config SH_DSP
- bool "DSP support"
- default y if SH4AL_DSP || !CPU_SH4
- default n
- help
- Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
- This option must be set in order to enable the DSP.
-
-config SH_ADC
- bool "ADC support"
- depends on CPU_SH3
- default y
- help
- Selecting this option will allow the Linux kernel to use SH3 on-chip
- ADC module.
-
- If unsure, say N.
-
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
- help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
- bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
- help
- This enables support for a speculative instruction fetch for
- subroutine return. There are various pitfalls associated with
- this, as outlined in the SH7780 hardware manual.
-
- If unsure, say N.
-
-config CPU_HAS_INTEVT
- bool
-
-config CPU_HAS_PINT_IRQ
- bool
-
-config CPU_HAS_MASKREG_IRQ
- bool
-
-config CPU_HAS_INTC2_IRQ
- bool
-
-config CPU_HAS_IPR_IRQ
- bool
-
-config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.txt> for further
- information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEA
- bool
-
-endmenu
-
menu "Timer and clock configuration"
config SH_TMU
@@ -473,13 +440,13 @@ config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
+ default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
- default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785
- default "60000000" if CPU_SUBTYPE_SH7751
+ default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
+ default "50000000"
help
This option is used to specify the peripheral clock frequency.
This is necessary for determining the reference clock value on
@@ -487,8 +454,10 @@ config SH_PCLK_FREQ
config SH_CLK_MD
int "CPU Mode Pin Setting"
- default 0
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+ default 6 if CPU_SUBTYPE_SH7206
+ default 5 if CPU_SUBTYPE_SH7619
+ default 0
help
MD2 - MD0 pin setting.
@@ -560,6 +529,7 @@ config CRASH_DUMP
config SMP
bool "Symmetric multi-processing support"
+ depends on SYS_SUPPORTS_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -584,6 +554,7 @@ config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
+ default "4" if CPU_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
@@ -623,6 +594,7 @@ config BOOT_LINK_OFFSET
config UBC_WAKEUP
bool "Wakeup UBC on startup"
+ depends on CPU_SH4
help
Selecting this option will wakeup the User Break Controller (UBC) on
startup. Although the UBC is left in an awake state when the processor
@@ -651,8 +623,8 @@ menu "Bus options"
# we're not using PCMCIA, so we make it dependent on
# PCMCIA outright. -- PFM.
config ISA
- bool
- default y if PCMCIA
+ def_bool y
+ depends on PCMCIA && HD6446X_SERIES
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -690,6 +662,49 @@ config SUPERHYWAY
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
+config CF_ENABLER
+ bool "Compact Flash Enabler support"
+ depends on SOLUTION_ENGINE || SH_SH03
+ ---help---
+ Compact Flash is a small, removable mass storage device introduced
+ in 1994 originally as a PCMCIA device. If you say `Y' here, you
+ compile in support for Compact Flash devices directly connected to
+ a SuperH processor. A Compact Flash FAQ is available at
+ <http://www.compactflash.org/faqs/faq.htm>.
+
+ If your board has "Directly Connected" CompactFlash at area 5 or 6,
+ you may want to enable this option. Then, you can use CF as
+ primary IDE drive (only tested for SanDisk).
+
+ If in doubt, select 'N'.
+
+choice
+ prompt "Compact Flash Connection Area"
+ depends on CF_ENABLER
+ default CF_AREA6
+
+config CF_AREA5
+ bool "Area5"
+ help
+ If your board has "Directly Connected" CompactFlash, You should
+ select the area where your CF is connected to.
+
+ - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+ - "Area6" if it is connected to Area 6 (0x18000000)
+
+ "Area6" will work for most boards.
+
+config CF_AREA6
+ bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+ hex
+ depends on CF_ENABLER
+ default "0xb8000000" if CF_AREA6
+ default "0xb4000000" if CF_AREA5
+
source "arch/sh/drivers/pci/Kconfig"
source "drivers/pci/Kconfig"
@@ -707,7 +722,7 @@ source "fs/Kconfig.binfmt"
endmenu
menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
source kernel/power/Kconfig