summaryrefslogtreecommitdiff
path: root/arch/sh/lib64/memcpy.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/lib64/memcpy.S')
-rw-r--r--arch/sh/lib64/memcpy.S202
1 files changed, 0 insertions, 202 deletions
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
deleted file mode 100644
index 231ea595b39a..000000000000
--- a/arch/sh/lib64/memcpy.S
+++ /dev/null
@@ -1,202 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-! ARG1: source pointer
-! ARG2: byte count
-!
-! Exit: RESULT: destination pointer
-! any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-! unfortunately it is difficult in some cases to concatanate bytes
-! into a longword on the SH, so this does a longword read and small
-! writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-! copied is unsigned greater than the address of the first byte to
-! be copied. This could be easily swapped for a signed comparison,
-! but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-! bytes memory chunk to b copied, the rest of the word can be read
-! without side effects.
-! This could be easily changed by increasing the minimum size of
-! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-! however, this would cost a few extra cyles on average.
-! For SHmedia, the assumption is that any quadword can be read in its
-! enirety if at least one byte is included in the copy.
-!
-
- .section .text..SHmedia32,"ax"
- .globl memcpy
- .type memcpy, @function
- .align 5
-
-memcpy:
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
- ld.b r3,0,r63
- pta/l Large,tr0
- movi 25,r0
- bgeu/u r4,r0,tr0
- nsb r4,r0
- shlli r0,5,r0
- movi (L1-L0+63*32 + 1) & 0xffff,r1
- sub r1, r0, r0
-L0: ptrel r0,tr0
- add r2,r4,r5
- ptabs r18,tr1
- add r3,r4,r6
- blink tr0,r63
-
-/* Rearranged to make cut2 safe */
- .balign 8
-L4_7: /* 4..7 byte memcpy cntd. */
- stlo.l r2, 0, r0
- or r6, r7, r6
- sthi.l r5, -1, r6
- stlo.l r5, -4, r6
- blink tr1,r63
-
- .balign 8
-L1: /* 0 byte memcpy */
- nop
- blink tr1,r63
- nop
- nop
- nop
- nop
-
-L2_3: /* 2 or 3 byte memcpy cntd. */
- st.b r5,-1,r6
- blink tr1,r63
-
- /* 1 byte memcpy */
- ld.b r3,0,r0
- st.b r2,0,r0
- blink tr1,r63
-
-L8_15: /* 8..15 byte memcpy cntd. */
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
- /* 2 or 3 byte memcpy */
- ld.b r3,0,r0
- ld.b r2,0,r63
- ld.b r3,1,r1
- st.b r2,0,r0
- pta/l L2_3,tr0
- ld.b r6,-1,r6
- st.b r2,1,r1
- blink tr0, r63
-
- /* 4 .. 7 byte memcpy */
- LDUAL (r3, 0, r0, r1)
- pta L4_7, tr0
- ldlo.l r6, -4, r7
- or r0, r1, r0
- sthi.l r2, 3, r0
- ldhi.l r6, -1, r6
- blink tr0, r63
-
- /* 8 .. 15 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- pta L8_15, tr0
- ldlo.q r6, -8, r7
- or r0, r1, r0
- sthi.q r2, 7, r0
- ldhi.q r6, -1, r6
- blink tr0, r63
-
- /* 16 .. 24 byte memcpy */
- LDUAQ (r3, 0, r0, r1)
- LDUAQ (r3, 8, r8, r9)
- or r0, r1, r0
- sthi.q r2, 7, r0
- or r8, r9, r8
- sthi.q r2, 15, r8
- ldlo.q r6, -8, r7
- ldhi.q r6, -1, r6
- stlo.q r2, 8, r8
- stlo.q r2, 0, r0
- or r6, r7, r6
- sthi.q r5, -1, r6
- stlo.q r5, -8, r6
- blink tr1,r63
-
-Large:
- ld.b r2, 0, r63
- pta/l Loop_ua, tr1
- ori r3, -8, r7
- sub r2, r7, r22
- sub r3, r2, r6
- add r2, r4, r5
- ldlo.q r3, 0, r0
- addi r5, -16, r5
- movi 64+8, r27 // could subtract r7 from that.
- stlo.q r2, 0, r0
- sthi.q r2, 7, r0
- ldx.q r22, r6, r0
- bgtu/l r27, r4, tr1
-
- addi r5, -48, r27
- pta/l Loop_line, tr0
- addi r6, 64, r36
- addi r6, -24, r19
- addi r6, -16, r20
- addi r6, -8, r21
-
-Loop_line:
- ldx.q r22, r36, r63
- alloco r22, 32
- addi r22, 32, r22
- ldx.q r22, r19, r23
- sthi.q r22, -25, r0
- ldx.q r22, r20, r24
- ldx.q r22, r21, r25
- stlo.q r22, -32, r0
- ldx.q r22, r6, r0
- sthi.q r22, -17, r23
- sthi.q r22, -9, r24
- sthi.q r22, -1, r25
- stlo.q r22, -24, r23
- stlo.q r22, -16, r24
- stlo.q r22, -8, r25
- bgeu r27, r22, tr0
-
-Loop_ua:
- addi r22, 8, r22
- sthi.q r22, -1, r0
- stlo.q r22, -8, r0
- ldx.q r22, r6, r0
- bgtu/l r5, r22, tr1
-
- add r3, r4, r7
- ldlo.q r7, -8, r1
- sthi.q r22, 7, r0
- ldhi.q r7, -1, r7
- ptabs r18,tr1
- stlo.q r22, 0, r0
- or r1, r7, r1
- sthi.q r5, 15, r1
- stlo.q r5, 8, r1
- blink tr1, r63
-
- .size memcpy,.-memcpy