diff options
Diffstat (limited to 'arch/x86/kvm/vmx/vmx.c')
-rw-r--r-- | arch/x86/kvm/vmx/vmx.c | 320 |
1 files changed, 5 insertions, 315 deletions
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index b0ba1cc79e6a..2cf068f45227 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -395,13 +395,6 @@ DEFINE_PER_CPU(struct vmcs *, current_vmcs); */ static DEFINE_PER_CPU(struct list_head, loaded_vmcss_on_cpu); -/* - * We maintian a per-CPU linked-list of vCPU, so in wakeup_handler() we - * can find which vCPU should be waken up. - */ -static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu); -static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock); - static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS); static DEFINE_SPINLOCK(vmx_vpid_lock); @@ -1256,62 +1249,6 @@ static void vmx_write_guest_kernel_gs_base(struct vcpu_vmx *vmx, u64 data) } #endif -static void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - struct pi_desc old, new; - unsigned int dest; - - /* - * In case of hot-plug or hot-unplug, we may have to undo - * vmx_vcpu_pi_put even if there is no assigned device. And we - * always keep PI.NDST up to date for simplicity: it makes the - * code easier, and CPU migration is not a fast path. - */ - if (!pi_test_sn(pi_desc) && vcpu->cpu == cpu) - return; - - /* - * If the 'nv' field is POSTED_INTR_WAKEUP_VECTOR, do not change - * PI.NDST: pi_post_block is the one expected to change PID.NDST and the - * wakeup handler expects the vCPU to be on the blocked_vcpu_list that - * matches PI.NDST. Otherwise, a vcpu may not be able to be woken up - * correctly. - */ - if (pi_desc->nv == POSTED_INTR_WAKEUP_VECTOR || vcpu->cpu == cpu) { - pi_clear_sn(pi_desc); - goto after_clear_sn; - } - - /* The full case. */ - do { - old.control = new.control = pi_desc->control; - - dest = cpu_physical_id(cpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - new.sn = 0; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - -after_clear_sn: - - /* - * Clear SN before reading the bitmap. The VT-d firmware - * writes the bitmap and reads SN atomically (5.2.3 in the - * spec), so it doesn't really have a memory barrier that - * pairs with this, but we cannot do that and we need one. - */ - smp_mb__after_atomic(); - - if (!pi_is_pir_empty(pi_desc)) - pi_set_on(pi_desc); -} - void vmx_vcpu_load_vmcs(struct kvm_vcpu *vcpu, int cpu, struct loaded_vmcs *buddy) { @@ -1395,20 +1332,6 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) vmx->host_debugctlmsr = get_debugctlmsr(); } -static void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (!kvm_arch_has_assigned_device(vcpu->kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(vcpu)) - return; - - /* Set SN when the vCPU is preempted */ - if (vcpu->preempted) - pi_set_sn(pi_desc); -} - static void vmx_vcpu_put(struct kvm_vcpu *vcpu) { vmx_vcpu_pi_put(vcpu); @@ -5408,25 +5331,6 @@ static void shrink_ple_window(struct kvm_vcpu *vcpu) } } -/* - * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR. - */ -static void wakeup_handler(void) -{ - struct kvm_vcpu *vcpu; - int cpu = smp_processor_id(); - - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); - list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu), - blocked_vcpu_list) { - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (pi_test_on(pi_desc) == 1) - kvm_vcpu_kick(vcpu); - } - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); -} - static void vmx_enable_tdp(void) { kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK, @@ -6283,14 +6187,6 @@ static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu) return max_irr; } -static bool vmx_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - return pi_test_on(pi_desc) || - (pi_test_sn(pi_desc) && !pi_is_pir_empty(pi_desc)); -} - static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) { if (!kvm_vcpu_apicv_active(vcpu)) @@ -7432,107 +7328,6 @@ static void vmx_enable_log_dirty_pt_masked(struct kvm *kvm, kvm_mmu_clear_dirty_pt_masked(kvm, memslot, offset, mask); } -static void __pi_post_block(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - struct pi_desc old, new; - unsigned int dest; - - do { - old.control = new.control = pi_desc->control; - WARN(old.nv != POSTED_INTR_WAKEUP_VECTOR, - "Wakeup handler not enabled while the VCPU is blocked\n"); - - dest = cpu_physical_id(vcpu->cpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - /* set 'NV' to 'notification vector' */ - new.nv = POSTED_INTR_VECTOR; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - - if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) { - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - list_del(&vcpu->blocked_vcpu_list); - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - vcpu->pre_pcpu = -1; - } -} - -/* - * This routine does the following things for vCPU which is going - * to be blocked if VT-d PI is enabled. - * - Store the vCPU to the wakeup list, so when interrupts happen - * we can find the right vCPU to wake up. - * - Change the Posted-interrupt descriptor as below: - * 'NDST' <-- vcpu->pre_pcpu - * 'NV' <-- POSTED_INTR_WAKEUP_VECTOR - * - If 'ON' is set during this process, which means at least one - * interrupt is posted for this vCPU, we cannot block it, in - * this case, return 1, otherwise, return 0. - * - */ -static int pi_pre_block(struct kvm_vcpu *vcpu) -{ - unsigned int dest; - struct pi_desc old, new; - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (!kvm_arch_has_assigned_device(vcpu->kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(vcpu)) - return 0; - - WARN_ON(irqs_disabled()); - local_irq_disable(); - if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) { - vcpu->pre_pcpu = vcpu->cpu; - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - list_add_tail(&vcpu->blocked_vcpu_list, - &per_cpu(blocked_vcpu_on_cpu, - vcpu->pre_pcpu)); - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - } - - do { - old.control = new.control = pi_desc->control; - - WARN((pi_desc->sn == 1), - "Warning: SN field of posted-interrupts " - "is set before blocking\n"); - - /* - * Since vCPU can be preempted during this process, - * vcpu->cpu could be different with pre_pcpu, we - * need to set pre_pcpu as the destination of wakeup - * notification event, then we can find the right vCPU - * to wakeup in wakeup handler if interrupts happen - * when the vCPU is in blocked state. - */ - dest = cpu_physical_id(vcpu->pre_pcpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - /* set 'NV' to 'wakeup vector' */ - new.nv = POSTED_INTR_WAKEUP_VECTOR; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - - /* We should not block the vCPU if an interrupt is posted for it. */ - if (pi_test_on(pi_desc) == 1) - __pi_post_block(vcpu); - - local_irq_enable(); - return (vcpu->pre_pcpu == -1); -} - static int vmx_pre_block(struct kvm_vcpu *vcpu) { if (pi_pre_block(vcpu)) @@ -7544,17 +7339,6 @@ static int vmx_pre_block(struct kvm_vcpu *vcpu) return 0; } -static void pi_post_block(struct kvm_vcpu *vcpu) -{ - if (vcpu->pre_pcpu == -1) - return; - - WARN_ON(irqs_disabled()); - local_irq_disable(); - __pi_post_block(vcpu); - local_irq_enable(); -} - static void vmx_post_block(struct kvm_vcpu *vcpu) { if (kvm_x86_ops.set_hv_timer) @@ -7563,100 +7347,6 @@ static void vmx_post_block(struct kvm_vcpu *vcpu) pi_post_block(vcpu); } -/* - * vmx_update_pi_irte - set IRTE for Posted-Interrupts - * - * @kvm: kvm - * @host_irq: host irq of the interrupt - * @guest_irq: gsi of the interrupt - * @set: set or unset PI - * returns 0 on success, < 0 on failure - */ -static int vmx_update_pi_irte(struct kvm *kvm, unsigned int host_irq, - uint32_t guest_irq, bool set) -{ - struct kvm_kernel_irq_routing_entry *e; - struct kvm_irq_routing_table *irq_rt; - struct kvm_lapic_irq irq; - struct kvm_vcpu *vcpu; - struct vcpu_data vcpu_info; - int idx, ret = 0; - - if (!kvm_arch_has_assigned_device(kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(kvm->vcpus[0])) - return 0; - - idx = srcu_read_lock(&kvm->irq_srcu); - irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu); - if (guest_irq >= irq_rt->nr_rt_entries || - hlist_empty(&irq_rt->map[guest_irq])) { - pr_warn_once("no route for guest_irq %u/%u (broken user space?)\n", - guest_irq, irq_rt->nr_rt_entries); - goto out; - } - - hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) { - if (e->type != KVM_IRQ_ROUTING_MSI) - continue; - /* - * VT-d PI cannot support posting multicast/broadcast - * interrupts to a vCPU, we still use interrupt remapping - * for these kind of interrupts. - * - * For lowest-priority interrupts, we only support - * those with single CPU as the destination, e.g. user - * configures the interrupts via /proc/irq or uses - * irqbalance to make the interrupts single-CPU. - * - * We will support full lowest-priority interrupt later. - * - * In addition, we can only inject generic interrupts using - * the PI mechanism, refuse to route others through it. - */ - - kvm_set_msi_irq(kvm, e, &irq); - if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu) || - !kvm_irq_is_postable(&irq)) { - /* - * Make sure the IRTE is in remapped mode if - * we don't handle it in posted mode. - */ - ret = irq_set_vcpu_affinity(host_irq, NULL); - if (ret < 0) { - printk(KERN_INFO - "failed to back to remapped mode, irq: %u\n", - host_irq); - goto out; - } - - continue; - } - - vcpu_info.pi_desc_addr = __pa(vcpu_to_pi_desc(vcpu)); - vcpu_info.vector = irq.vector; - - trace_kvm_pi_irte_update(host_irq, vcpu->vcpu_id, e->gsi, - vcpu_info.vector, vcpu_info.pi_desc_addr, set); - - if (set) - ret = irq_set_vcpu_affinity(host_irq, &vcpu_info); - else - ret = irq_set_vcpu_affinity(host_irq, NULL); - - if (ret < 0) { - printk(KERN_INFO "%s: failed to update PI IRTE\n", - __func__); - goto out; - } - } - - ret = 0; -out: - srcu_read_unlock(&kvm->irq_srcu, idx); - return ret; -} - static void vmx_setup_mce(struct kvm_vcpu *vcpu) { if (vcpu->arch.mcg_cap & MCG_LMCE_P) @@ -7820,7 +7510,7 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = { .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt, .sync_pir_to_irr = vmx_sync_pir_to_irr, .deliver_posted_interrupt = vmx_deliver_posted_interrupt, - .dy_apicv_has_pending_interrupt = vmx_dy_apicv_has_pending_interrupt, + .dy_apicv_has_pending_interrupt = pi_has_pending_interrupt, .set_tss_addr = vmx_set_tss_addr, .set_identity_map_addr = vmx_set_identity_map_addr, @@ -7854,7 +7544,7 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = { .pmu_ops = &intel_pmu_ops, .nested_ops = &vmx_nested_ops, - .update_pi_irte = vmx_update_pi_irte, + .update_pi_irte = pi_update_irte, #ifdef CONFIG_X86_64 .set_hv_timer = vmx_set_hv_timer, @@ -8020,7 +7710,7 @@ static __init int hardware_setup(void) vmx_x86_ops.request_immediate_exit = __kvm_request_immediate_exit; } - kvm_set_posted_intr_wakeup_handler(wakeup_handler); + kvm_set_posted_intr_wakeup_handler(pi_wakeup_handler); kvm_mce_cap_supported |= MCG_LMCE_P; @@ -8159,8 +7849,8 @@ static int __init vmx_init(void) for_each_possible_cpu(cpu) { INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu)); - INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu)); - spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); + + pi_init(cpu); } #ifdef CONFIG_KEXEC_CORE |