summaryrefslogtreecommitdiff
path: root/arch/x86/pci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/pci')
-rw-r--r--arch/x86/pci/acpi.c32
-rw-r--r--arch/x86/pci/ce4100.c2
-rw-r--r--arch/x86/pci/common.c14
-rw-r--r--arch/x86/pci/direct.c6
-rw-r--r--arch/x86/pci/mmconfig-shared.c3
-rw-r--r--arch/x86/pci/numaq_32.c2
-rw-r--r--arch/x86/pci/olpc.c4
-rw-r--r--arch/x86/pci/pcbios.c2
-rw-r--r--arch/x86/pci/visws.c2
-rw-r--r--arch/x86/pci/xen.c401
10 files changed, 238 insertions, 230 deletions
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 68c3c1395202..404f21a3ff9e 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -43,6 +43,17 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
+ /* 2006 AMD HT/VIA system with two host bridges */
+ {
+ .callback = set_use_crs,
+ .ident = "ASUS M2V-MX SE",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
{}
};
@@ -246,10 +257,9 @@ static void add_resources(struct pci_root_info *info)
conflict = insert_resource_conflict(root, res);
if (conflict)
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
+ dev_info(&info->bridge->dev,
+ "ignoring host bridge window %pR (conflicts with %s %pR)\n",
+ res, conflict->name, conflict);
else
pci_bus_add_resource(info->bus, res, 0);
}
@@ -361,6 +371,20 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
}
}
+ /* After the PCI-E bus has been walked and all devices discovered,
+ * configure any settings of the fabric that might be necessary.
+ */
+ if (bus) {
+ struct pci_bus *child;
+ list_for_each_entry(child, &bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
+ }
+
if (!bus)
kfree(sd);
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 67858be4b52b..99176094500b 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -257,6 +257,7 @@ static int ce4100_conf_read(unsigned int seg, unsigned int bus,
{
int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
@@ -282,6 +283,7 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus,
{
int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 5fe75026ecc2..92df322e0b57 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -247,13 +247,6 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
#endif /* __i386__ */
{
- .callback = find_sort_method,
- .ident = "Dell System",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
- },
- },
- {
.callback = set_bf_sort,
.ident = "Dell PowerEdge 1950",
.matches = {
@@ -294,6 +287,13 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
},
{
+ .callback = find_sort_method,
+ .ident = "Dell System",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+ },
+ },
+ {
.callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
.matches = {
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index e6fd8473fb7b..4f2c70439d7f 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -22,7 +22,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
@@ -53,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -97,6 +97,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
@@ -138,6 +139,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 750c346ef50a..301e325992f6 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -519,7 +519,8 @@ static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
if (cfg->address < 0xFFFFFFFF)
return 0;
- if (!strcmp(mcfg->header.oem_id, "SGI"))
+ if (!strcmp(mcfg->header.oem_id, "SGI") ||
+ !strcmp(mcfg->header.oem_id, "SGI2"))
return 0;
if (mcfg->header.revision >= 1) {
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 5c9e2458df4e..512a88c41501 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -34,6 +34,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ WARN_ON(seg);
if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -73,6 +74,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ WARN_ON(seg);
if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 13700ec8e2e4..5262603b04d9 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -206,6 +206,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
{
uint32_t *addr;
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
@@ -264,6 +266,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
static int pci_olpc_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, uint32_t value)
{
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index a5f7d0d63de0..f68553551467 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -181,6 +181,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -247,6 +248,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 03008f72eb04..6f2f8eeed171 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -24,7 +24,7 @@ static void pci_visws_disable_irq(struct pci_dev *dev) { }
unsigned int pci_bus0, pci_bus1;
-static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq, bus = dev->bus->number;
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index f567965c0620..492ade8c978e 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -1,8 +1,13 @@
/*
- * Xen PCI Frontend Stub - puts some "dummy" functions in to the Linux
- * x86 PCI core to support the Xen PCI Frontend
+ * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
+ * initial domain support. We also handle the DSDT _PRT callbacks for GSI's
+ * used in HVM and initial domain mode (PV does not parse ACPI, so it has no
+ * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
+ * 0xcf8 PCI configuration read/write.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
*/
#include <linux/module.h>
#include <linux/init.h>
@@ -19,22 +24,53 @@
#include <xen/events.h>
#include <asm/xen/pci.h>
+static int xen_pcifront_enable_irq(struct pci_dev *dev)
+{
+ int rc;
+ int share = 1;
+ int pirq;
+ u8 gsi;
+
+ rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
+ rc);
+ return rc;
+ }
+ /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
+ pirq = gsi;
+
+ if (gsi < NR_IRQS_LEGACY)
+ share = 0;
+
+ rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
+ gsi, pirq, rc);
+ return rc;
+ }
+
+ dev->irq = rc;
+ dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
+ return 0;
+}
+
#ifdef CONFIG_ACPI
-static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
- int trigger, int polarity)
+static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
+ bool set_pirq)
{
- int rc, irq;
+ int rc, pirq = -1, irq = -1;
struct physdev_map_pirq map_irq;
int shareable = 0;
char *name;
- if (!xen_hvm_domain())
- return -1;
+ if (set_pirq)
+ pirq = gsi;
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
map_irq.index = gsi;
- map_irq.pirq = -1;
+ map_irq.pirq = pirq;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
if (rc) {
@@ -42,7 +78,7 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
return -1;
}
- if (trigger == ACPI_EDGE_SENSITIVE) {
+ if (triggering == ACPI_EDGE_SENSITIVE) {
shareable = 0;
name = "ioapic-edge";
} else {
@@ -50,12 +86,63 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
name = "ioapic-level";
}
+ if (gsi_override >= 0)
+ gsi = gsi_override;
+
irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
+ if (irq < 0)
+ goto out;
+
+ printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
+out:
+ return irq;
+}
+
+static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+ if (!xen_hvm_domain())
+ return -1;
- printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+ return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
+ false /* no mapping of GSI to PIRQ */);
+}
+
+#ifdef CONFIG_XEN_DOM0
+static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
+{
+ int rc, irq;
+ struct physdev_setup_gsi setup_gsi;
+
+ if (!xen_pv_domain())
+ return -1;
+
+ printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
+ gsi, triggering, polarity);
+
+ irq = xen_register_pirq(gsi, gsi_override, triggering, true);
+
+ setup_gsi.gsi = gsi;
+ setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
+ if (rc == -EEXIST)
+ printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
+ else if (rc) {
+ printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
+ gsi, rc);
+ }
return irq;
}
+
+static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+ return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
+}
+#endif
#endif
#if defined(CONFIG_PCI_MSI)
@@ -65,6 +152,45 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
+static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ int irq, ret, i;
+ struct msi_desc *msidesc;
+ int *v;
+
+ v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
+ if (!v)
+ return -ENOMEM;
+
+ if (type == PCI_CAP_ID_MSIX)
+ ret = xen_pci_frontend_enable_msix(dev, v, nvec);
+ else
+ ret = xen_pci_frontend_enable_msi(dev, v);
+ if (ret)
+ goto error;
+ i = 0;
+ list_for_each_entry(msidesc, &dev->msi_list, list) {
+ irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
+ (type == PCI_CAP_ID_MSIX) ?
+ "pcifront-msi-x" :
+ "pcifront-msi",
+ DOMID_SELF);
+ if (irq < 0) {
+ ret = irq;
+ goto free;
+ }
+ i++;
+ }
+ kfree(v);
+ return 0;
+
+error:
+ dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+free:
+ kfree(v);
+ return ret;
+}
+
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
@@ -97,8 +223,10 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
if (msg.data != XEN_PIRQ_MSI_DATA ||
xen_irq_from_pirq(pirq) < 0) {
pirq = xen_allocate_pirq_msi(dev, msidesc);
- if (pirq < 0)
+ if (pirq < 0) {
+ irq = -ENODEV;
goto error;
+ }
xen_msi_compose_msg(dev, pirq, &msg);
__write_msi_msg(msidesc, &msg);
dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
@@ -120,71 +248,12 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
error:
dev_err(&dev->dev,
"Xen PCI frontend has not registered MSI/MSI-X support!\n");
- return -ENODEV;
-}
-
-/*
- * For MSI interrupts we have to use drivers/xen/event.s functions to
- * allocate an irq_desc and setup the right */
-
-
-static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
- int irq, ret, i;
- struct msi_desc *msidesc;
- int *v;
-
- v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
- if (!v)
- return -ENOMEM;
-
- if (type == PCI_CAP_ID_MSIX)
- ret = xen_pci_frontend_enable_msix(dev, v, nvec);
- else
- ret = xen_pci_frontend_enable_msi(dev, v);
- if (ret)
- goto error;
- i = 0;
- list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
- (type == PCI_CAP_ID_MSIX) ?
- "pcifront-msi-x" :
- "pcifront-msi",
- DOMID_SELF);
- if (irq < 0)
- goto free;
- i++;
- }
- kfree(v);
- return 0;
-
-error:
- dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
-free:
- kfree(v);
- return ret;
-}
-
-static void xen_teardown_msi_irqs(struct pci_dev *dev)
-{
- struct msi_desc *msidesc;
-
- msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
- if (msidesc->msi_attrib.is_msix)
- xen_pci_frontend_disable_msix(dev);
- else
- xen_pci_frontend_disable_msi(dev);
-
- /* Free the IRQ's and the msidesc using the generic code. */
- default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
- xen_destroy_irq(irq);
+ return irq;
}
#ifdef CONFIG_XEN_DOM0
+static bool __read_mostly pci_seg_supported = true;
+
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int ret = 0;
@@ -202,10 +271,11 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
memset(&map_irq, 0, sizeof(map_irq));
map_irq.domid = domid;
- map_irq.type = MAP_PIRQ_TYPE_MSI;
+ map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
map_irq.index = -1;
map_irq.pirq = -1;
- map_irq.bus = dev->bus->number;
+ map_irq.bus = dev->bus->number |
+ (pci_domain_nr(dev->bus) << 16);
map_irq.devfn = dev->devfn;
if (type == PCI_CAP_ID_MSIX) {
@@ -222,7 +292,20 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
}
- ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ ret = -EINVAL;
+ if (pci_seg_supported)
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
+ map_irq.type = MAP_PIRQ_TYPE_MSI;
+ map_irq.index = -1;
+ map_irq.pirq = -1;
+ map_irq.bus = dev->bus->number;
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (ret != -EINVAL)
+ pci_seg_supported = false;
+ }
if (ret) {
dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
ret, domid);
@@ -242,45 +325,28 @@ out:
return ret;
}
#endif
-#endif
-static int xen_pcifront_enable_irq(struct pci_dev *dev)
+static void xen_teardown_msi_irqs(struct pci_dev *dev)
{
- int rc;
- int share = 1;
- int pirq;
- u8 gsi;
-
- rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
- rc);
- return rc;
- }
-
- rc = xen_allocate_pirq_gsi(gsi);
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n",
- gsi, rc);
- return rc;
- }
- pirq = rc;
+ struct msi_desc *msidesc;
- if (gsi < NR_IRQS_LEGACY)
- share = 0;
+ msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
+ if (msidesc->msi_attrib.is_msix)
+ xen_pci_frontend_disable_msix(dev);
+ else
+ xen_pci_frontend_disable_msi(dev);
- rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
- gsi, pirq, rc);
- return rc;
- }
+ /* Free the IRQ's and the msidesc using the generic code. */
+ default_teardown_msi_irqs(dev);
+}
- dev->irq = rc;
- dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
- return 0;
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+ xen_destroy_irq(irq);
}
+#endif
+
int __init pci_xen_init(void)
{
if (!xen_pv_domain() || xen_initial_domain())
@@ -327,79 +393,6 @@ int __init pci_xen_hvm_init(void)
}
#ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int gsi_override, int triggering)
-{
- int rc, pirq, irq = -1;
- struct physdev_map_pirq map_irq;
- int shareable = 0;
- char *name;
-
- if (!xen_pv_domain())
- return -1;
-
- if (triggering == ACPI_EDGE_SENSITIVE) {
- shareable = 0;
- name = "ioapic-edge";
- } else {
- shareable = 1;
- name = "ioapic-level";
- }
- pirq = xen_allocate_pirq_gsi(gsi);
- if (pirq < 0)
- goto out;
-
- if (gsi_override >= 0)
- irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name);
- else
- irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
- if (irq < 0)
- goto out;
-
- printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi);
-
- map_irq.domid = DOMID_SELF;
- map_irq.type = MAP_PIRQ_TYPE_GSI;
- map_irq.index = gsi;
- map_irq.pirq = pirq;
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
- if (rc) {
- printk(KERN_WARNING "xen map irq failed %d\n", rc);
- return -1;
- }
-
-out:
- return irq;
-}
-
-static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
-{
- int rc, irq;
- struct physdev_setup_gsi setup_gsi;
-
- if (!xen_pv_domain())
- return -1;
-
- printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
- gsi, triggering, polarity);
-
- irq = xen_register_pirq(gsi, gsi_override, triggering);
-
- setup_gsi.gsi = gsi;
- setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
- setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
- if (rc == -EEXIST)
- printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
- else if (rc) {
- printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
- gsi, rc);
- }
-
- return irq;
-}
-
static __init void xen_setup_acpi_sci(void)
{
int rc;
@@ -419,7 +412,7 @@ static __init void xen_setup_acpi_sci(void)
}
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
+
printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
"polarity=%d\n", gsi, trigger, polarity);
@@ -434,10 +427,9 @@ static __init void xen_setup_acpi_sci(void)
* the ACPI interpreter and keels over since IRQ 9 has not been
* setup as we had setup IRQ 20 for it).
*/
- /* Check whether the GSI != IRQ */
if (acpi_gsi_to_irq(gsi, &irq) == 0) {
- if (irq >= 0 && irq != gsi)
- /* Bugger, we MUST have that IRQ. */
+ /* Use the provided value if it's valid. */
+ if (irq >= 0)
gsi_override = irq;
}
@@ -447,41 +439,16 @@ static __init void xen_setup_acpi_sci(void)
return;
}
-static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
- int trigger, int polarity)
+int __init pci_xen_initial_domain(void)
{
- return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
-}
+ int irq;
-static int __init pci_xen_initial_domain(void)
-{
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
#endif
xen_setup_acpi_sci();
__acpi_register_gsi = acpi_register_gsi_xen;
-
- return 0;
-}
-
-void __init xen_setup_pirqs(void)
-{
- int pirq, irq;
-
- pci_xen_initial_domain();
-
- if (0 == nr_ioapics) {
- for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
- pirq = xen_allocate_pirq_gsi(irq);
- if (WARN(pirq < 0,
- "Could not allocate PIRQ for legacy interrupt\n"))
- break;
- irq = xen_bind_pirq_gsi_to_irq(irq, pirq, 0, "xt-pic");
- }
- return;
- }
-
/* Pre-allocate legacy irqs */
for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
int trigger, polarity;
@@ -490,12 +457,16 @@ void __init xen_setup_pirqs(void)
continue;
xen_register_pirq(irq, -1 /* no GSI override */,
- trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
+ trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
+ true /* Map GSI to PIRQ */);
}
+ if (0 == nr_ioapics) {
+ for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
+ xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
+ }
+ return 0;
}
-#endif
-#ifdef CONFIG_XEN_DOM0
struct xen_device_domain_owner {
domid_t domain;
struct pci_dev *dev;
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-13 05:35:22 +0300