diff options
Diffstat (limited to 'arch')
643 files changed, 26172 insertions, 5002 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59829fc90315..c5ca1846c4c8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -751,6 +751,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-dhcom-drc02.dtb \ imx6ull-dhcom-pdk2.dtb \ imx6ull-dhcom-picoitx.dtb \ + imx6ull-dhcor-maveo-box.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ @@ -983,6 +984,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-droid-bionic-xt875.dtb \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ + omap4-epson-embt2ws.dtb \ omap4-kc1.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ @@ -1266,7 +1268,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-ev1.dtb \ stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ - stm32mp157c-odyssey.dtb + stm32mp157c-odyssey.dtb \ + stm32mp157c-phycore-stm32mp1-3.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -1335,6 +1338,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-hummingbird.dtb \ sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-icnova-a20-adb4006.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-lamobo-r1.dtb \ sun7i-a20-linutronix-testbox-v2.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 75992eec830f..ea5882ed7010 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -18,7 +18,7 @@ }; &am33xx_pinmux { - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) @@ -31,7 +31,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ >; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 087e084506d2..ea4f8dde6424 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -18,13 +18,13 @@ }; &am33xx_pinmux { - tca6416_pins: pinmux_tca6416_pins { + tca6416_pins: tca6416-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) @@ -37,7 +37,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ @@ -52,7 +52,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ >; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index faeb39aab60a..ec914f27d11d 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -18,21 +18,21 @@ }; &am33xx_pinmux { - tca6416_pins: pinmux_tca6416_pins { + tca6416_pins: tca6416-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; - dcan1_pins: pinmux_dcan1_pins { + dcan1_pins: dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) @@ -45,7 +45,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ @@ -60,7 +60,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ >; diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi index 025014657d12..6a52e42b9e81 100644 --- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -37,7 +37,7 @@ }; &am33xx_pinmux { - user_leds: pinmux_user_leds { + user_leds: user-leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 6161c8929a78..c56087048cc1 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -48,7 +48,7 @@ }; &am33xx_pinmux { - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ @@ -60,33 +60,33 @@ >; }; - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */ >; }; - tps65910_pins: pinmux_tps65910_pins { + tps65910_pins: tps65910-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ben1.gpio1[28] */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ @@ -114,7 +114,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -141,7 +141,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data.mdio_data */ @@ -149,7 +149,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -157,7 +157,7 @@ >; }; - nandflash_pins_s0: nandflash_pins_s0 { + nandflash_pins_s0: nandflash-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 89c00ce42c26..eba843e22ea1 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -41,7 +41,7 @@ }; &am33xx_pinmux { - nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + nxp_hdmi_pins: nxp-hdmi-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) @@ -66,13 +66,13 @@ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; - nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + nxp_hdmi_off_pins: nxp-hdmi-off-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; - leds_base_pins: pinmux_leds_base_pins { + leds_base_pins: leds-base-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 02e04a12a270..0b073f290abc 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -66,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ @@ -75,34 +75,34 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) @@ -121,7 +121,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -140,7 +140,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -148,7 +148,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -156,7 +156,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spio0_cs1.gpio0_6 */ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) @@ -168,7 +168,7 @@ >; }; - emmc_pins: pinmux_emmc_pins { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi index 486f24deb875..109f08fd174d 100644 --- a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/interrupt-controller/irq.h> &am33xx_pinmux { - nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) @@ -33,13 +33,13 @@ >; }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) >; }; - mcasp0_pins: mcasp0_pins { + mcasp0_pins: mcasp0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 207d2b63e0eb..b4b4b80df08c 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -28,13 +28,13 @@ }; &am33xx_pinmux { - bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ @@ -45,7 +45,7 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ @@ -54,7 +54,7 @@ >; }; - wl18xx_pins: pinmux_wl18xx_pins { + wl18xx_pins: wl18xx-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 34579e98636e..b78e38f87892 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -115,7 +115,7 @@ }; &am33xx_pinmux { - user_leds_s0: user_leds_s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ @@ -132,7 +132,7 @@ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ @@ -140,7 +140,7 @@ }; /* UT0 */ - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -148,7 +148,7 @@ }; /* UT1 */ - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -156,7 +156,7 @@ }; /* GPS */ - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ @@ -164,27 +164,27 @@ }; /* DSM2 */ - uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ >; }; /* UT5 */ - uart5_pins: pinmux_uart5_pins { + uart5_pins: uart5-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ @@ -199,7 +199,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ @@ -210,13 +210,13 @@ >; }; - bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ @@ -225,7 +225,7 @@ >; }; - wl18xx_pins: pinmux_wl18xx_pins { + wl18xx_pins: wl18xx-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ @@ -234,7 +234,7 @@ }; /* DCAN */ - dcan1_pins: pinmux_dcan1_pins { + dcan1_pins: dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ @@ -243,7 +243,7 @@ }; /* E1 */ - eqep0_pins: pinmux_eqep0_pins { + eqep0_pins: eqep0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */ @@ -251,7 +251,7 @@ }; /* E2 */ - eqep1_pins: pinmux_eqep1_pins { + eqep1_pins: eqep1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */ @@ -259,7 +259,7 @@ }; /* E3 */ - eqep2_pins: pinmux_eqep2_pins { + eqep2_pins: eqep2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */ diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi index 9f7fb63744d0..383beeddf595 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -22,7 +22,7 @@ }; &am33xx_pinmux { - uart2_pins: uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */ diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index d388cffa1a4d..a4f5b5262645 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -27,13 +27,13 @@ }; &am33xx_pinmux { - bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ @@ -44,7 +44,7 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ @@ -53,7 +53,7 @@ >; }; - wl18xx_pins: pinmux_wl18xx_pins { + wl18xx_pins: wl18xx-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index a223cdd3e30e..648e97fe1dfd 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -36,14 +36,14 @@ }; &am33xx_pinmux { - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) @@ -57,7 +57,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -72,7 +72,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* mdio_data.mdio_data */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -81,7 +81,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -89,13 +89,13 @@ >; }; - usb1_drvvbus: usb1_drvvbus { + usb1_drvvbus: usb1-drvvbus-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - sd_pins: pinmux_sd_card { + sd_pins: sd-card-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0) @@ -107,7 +107,7 @@ >; }; - led_gpio_pins: led_gpio_pins { + led_gpio_pins: led-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */ diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 43b61e43ed1e..51021d582214 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -25,14 +25,14 @@ &am33xx_pinmux { pinctrl-names = "default"; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - nandflash_pins: nandflash_pins { + nandflash_pins: nandflash-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 993b13420699..72990e7ffe10 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -88,14 +88,14 @@ pinctrl-names = "default"; pinctrl-0 = <&bluetooth_pins>; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < /* uart0_ctsn.i2c1_sda */ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2) @@ -104,14 +104,14 @@ >; }; - gpio_led_pins: pinmux_gpio_led_pins { + gpio_led_pins: gpio-led-pins { pinctrl-single,pins = < /* gpmc_csn3.gpio2_0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7) >; }; - nandflash_pins: pinmux_nandflash_pins { + nandflash_pins: nandflash-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -132,14 +132,14 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -148,7 +148,7 @@ >; }; - dcan0_pins: pinmux_dcan0_pins { + dcan0_pins: dcan0-pins { pinctrl-single,pins = < /* uart1_ctsn.dcan0_tx */ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) @@ -157,7 +157,7 @@ >; }; - dcan1_pins: pinmux_dcan1_pins { + dcan1_pins: dcan1-pins { pinctrl-single,pins = < /* uart1_rxd.dcan1_tx */ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2) @@ -166,13 +166,13 @@ >; }; - ecap0_pins: pinmux_ecap0_pins { + ecap0_pins: ecap0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ /* mii1_tx_en.rgmii1_tctl */ @@ -202,7 +202,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -220,14 +220,14 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -235,7 +235,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -246,7 +246,7 @@ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0) @@ -257,7 +257,7 @@ }; /* wl1271 bluetooth */ - bluetooth_pins: pinmux_bluetooth_pins { + bluetooth_pins: bluetooth-pins { pinctrl-single,pins = < /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7) @@ -265,7 +265,7 @@ }; /* TLV320AIC23B codec */ - mcasp1_pins: pinmux_mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < /* MII1_CRS.mcasp1_aclkx */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) @@ -279,7 +279,7 @@ }; /* wl1271 WiFi */ - wifi_pins: pinmux_wifi_pins { + wifi_pins: wifi-pins { pinctrl-single,pins = < /* EMU1.gpio3_8 - WiFi IRQ */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 5beabaa5ff6a..6560db1dcdbe 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -163,7 +163,7 @@ pinctrl-names = "default"; pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; - matrix_keypad_s0: matrix_keypad_s0 { + matrix_keypad_s0: matrix-keypad-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a6.gpio1_22 */ @@ -173,35 +173,35 @@ >; }; - volume_keys_s0: volume_keys_s0 { + volume_keys_s0: volume-keys-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_sclk.gpio0_2 */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_d0.gpio0_3 */ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -210,13 +210,13 @@ >; }; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; - nandflash_pins_s0: nandflash_pins_s0 { + nandflash_pins_s0: nandflash-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -236,13 +236,13 @@ >; }; - ecap0_pins: backlight_pins { + ecap0_pins: backlight-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ @@ -260,7 +260,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -278,7 +278,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -286,7 +286,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -294,7 +294,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) @@ -307,7 +307,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ @@ -318,7 +318,7 @@ >; }; - wlan_pins: pinmux_wlan_pins { + wlan_pins: wlan-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a0.gpio1_16 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ @@ -326,7 +326,7 @@ >; }; - lcd_pins_s0: lcd_pins_s0 { + lcd_pins_s0: lcd-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ @@ -359,7 +359,7 @@ >; }; - mcasp1_pins: mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ @@ -368,7 +368,7 @@ >; }; - mcasp1_pins_sleep: mcasp1_pins_sleep { + mcasp1_pins_sleep: mcasp1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -377,7 +377,7 @@ >; }; - dcan1_pins_default: dcan1_pins_default { + dcan1_pins_default: dcan1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 5b3278c0c46a..332f6c8ae68b 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -202,7 +202,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; - lcd_pins_default: lcd_pins_default { + lcd_pins_default: lcd-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ @@ -235,7 +235,7 @@ >; }; - lcd_pins_sleep: lcd_pins_sleep { + lcd_pins_sleep: lcd-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad8.lcd_data23 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */ @@ -269,7 +269,7 @@ }; - user_leds_s0: user_leds_s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad4.gpio1_4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad5.gpio1_5 */ @@ -278,7 +278,7 @@ >; }; - gpio_keys_s0: gpio_keys_s0 { + gpio_keys_s0: gpio-keys-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ @@ -287,33 +287,33 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; - ecap2_pins: backlight_pins { + ecap2_pins: backlight-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ @@ -345,7 +345,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -377,7 +377,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -385,7 +385,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -393,7 +393,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) @@ -406,7 +406,7 @@ >; }; - mcasp1_pins: mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ @@ -415,7 +415,7 @@ >; }; - mcasp1_pins_sleep: mcasp1_pins_sleep { + mcasp1_pins_sleep: mcasp1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -424,7 +424,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ @@ -436,7 +436,7 @@ >; }; - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */ >; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index b357364e93f9..3031fc9061a4 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -481,14 +481,14 @@ pinctrl-names = "default"; pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < /* xdma_event_intr1.clkout2 */ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; - guardian_interface_pins: pinmux_interface_pins { + guardian_interface_pins: interface-pins { pinctrl-single,pins = < /* ADC_BATSENSE_EN */ /* (A14) MCASP0_AHCLKx.gpio3[21] */ @@ -518,13 +518,13 @@ >; }; - guardian_beeper_pins: pinmux_dmtimer7_pins { + guardian_beeper_pins: dmtimer7-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ >; }; - guardian_button_pins: pinmux_guardian_button_pins { + guardian_button_pins: guardian-button-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ @@ -532,28 +532,28 @@ }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - led_bl_pins: gpio_led_bl_pins { + led_bl_pins: gpio-led-bl-pins { pinctrl-single,pins = < /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) >; }; - lcd_disen_pins: pinmux_lcd_disen_pins { + lcd_disen_pins: lcd-disen-pins { pinctrl-single,pins = < /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) >; }; - lcd_pins_default: pinmux_lcd_pins_default { + lcd_pins_default: lcd-default-pins { pinctrl-single,pins = < /* (U10) gpmc_ad8.lcd_data23 */ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) @@ -614,7 +614,7 @@ >; }; - lcd_pins_sleep: pinmux_lcd_pins_sleep { + lcd_pins_sleep: lcd-sleep-pins { pinctrl-single,pins = < /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) @@ -659,13 +659,13 @@ >; }; - guardian_led_pins: pinmux_guardian_led_pins { + guardian_led_pins: guardian-led-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ @@ -677,7 +677,7 @@ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins: spi0-pins { pinctrl-single,pins = < /* SPI0_CLK - spi0_clk.spi */ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) @@ -690,7 +690,7 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < /* uart0_rxd.uart0_rxd */ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) @@ -699,7 +699,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < /* K18 uart2_rxd.mirx_txd */ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) @@ -708,7 +708,7 @@ >; }; - nandflash_pins: pinmux_nandflash_pins { + nandflash_pins: nandflash-pins { pinctrl-single,pins = < /* (U7) gpmc_ad0.gpmc_ad0 */ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 5835c0cdda50..7ed2321a8b40 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -152,7 +152,7 @@ }; &am33xx_pinmux { - user_leds: user_leds { + user_leds: user-leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ @@ -163,7 +163,7 @@ >; }; - mmc0_pins_default: mmc0_pins_default { + mmc0_pins_default: mmc0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -174,14 +174,14 @@ >; }; - i2c0_pins_default: i2c0_pins_default { + i2c0_pins_default: i2c0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; - spi0_pins_default: spi0_pins_default { + spi0_pins_default: spi0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) @@ -192,14 +192,14 @@ >; }; - uart3_pins_default: uart3_pins_default { + uart3_pins_default: uart3-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1, RMII mode */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ @@ -222,7 +222,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -246,7 +246,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -254,7 +254,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 3fddf80dcf71..4aed73655401 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -52,14 +52,14 @@ }; &am33xx_pinmux { - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - nandflash_pins: pinmux_nandflash_pins { + nandflash_pins: nandflash-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -79,14 +79,14 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - leds_pins: pinmux_leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 1282dae144dd..008be696327a 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -41,7 +41,7 @@ }; &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -52,14 +52,14 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ @@ -85,7 +85,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ @@ -111,7 +111,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -119,7 +119,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -127,7 +127,7 @@ >; }; - emmc_pins: pinmux_emmc_pins { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -142,7 +142,7 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 49e280b42442..b8730aa52ce6 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -31,27 +31,27 @@ &am33xx_pinmux { pinctrl-names = "default"; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - push_button_pins: pinmux_push_button { + push_button_pins: push-button-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_23 */ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -59,7 +59,7 @@ >; }; - mmc1_pins_default: pinmux_mmc1_pins { + mmc1_pins_default: mmc1-pins { pinctrl-single,pins = < /* eMMC */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ @@ -75,7 +75,7 @@ >; }; - spi0_pins: pinmux_spi0 { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts index 1cc513ed92cc..e986945ac1b5 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts @@ -28,7 +28,7 @@ &am33xx_pinmux { pinctrl-names = "default"; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ @@ -42,7 +42,7 @@ >; }; - spi1_pins: pinmux_spi1 { + spi1_pins: spi1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index 7d00e8b20f18..c16f3cff1e4b 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -38,7 +38,7 @@ pinctrl-names = "default"; pinctrl-0 = <&minipcie_pins>; - minipcie_pins: pinmux_minipcie { + minipcie_pins: minipcie-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ @@ -46,13 +46,13 @@ >; }; - push_button_pins: pinmux_push_button { + push_button_pins: push-button-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) @@ -60,21 +60,21 @@ }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -83,7 +83,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ @@ -92,7 +92,7 @@ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) @@ -117,7 +117,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -125,7 +125,7 @@ >; }; - mmc0_pins_default: pinmux_mmc0_pins { + mmc0_pins_default: mmc0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -138,7 +138,7 @@ >; }; - mmc2_pins_default: pinmux_mmc2_pins { + mmc2_pins_default: mmc2-pins { pinctrl-single,pins = < /* eMMC */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ @@ -154,7 +154,7 @@ >; }; - spi0_pins: pinmux_spi0 { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi index 6eea18b29355..584599269217 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -127,6 +127,7 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; + gpmc,wait-pin = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; ti,elm-id = <&elm>; @@ -159,21 +160,21 @@ }; &am33xx_pinmux { - mdio_pins_default: pinmux_mdio_pins_default { + mdio_pins_default: mdio-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data */ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk */ >; }; - mdio_pins_sleep: pinmux_mdio_pins_sleep { + mdio_pins_sleep: mdio-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - eth_slave1_pins_default: pinmux_eth_slave1_pins_default { + eth_slave1_pins_default: eth-slave1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tctl */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rctl */ @@ -190,7 +191,7 @@ >; }; - eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep { + eth_slave1_pins_sleep: eth-slave1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -207,34 +208,34 @@ >; }; - i2c0_pins_default: pinmux_i2c0_pins_default { + i2c0_pins_default: i2c0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SDA */ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SCL */ >; }; - i2c0_pins_gpio: pinmux_i2c0_pins_gpio { + i2c0_pins_gpio: i2c0-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */ >; }; - i2c0_pins_sleep: pinmux_i2c0_pins_sleep { + i2c0_pins_sleep: i2c0-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - led_mod_pins: pinmux_led_mod_pins { + led_mod_pins: led-mod-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */ >; }; - nand_pins_default: pinmux_nand_pins_default { + nand_pins_default: nand-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1 */ @@ -254,7 +255,7 @@ >; }; - nand_pins_sleep: pinmux_nand_pins_sleep { + nand_pins_sleep: nand-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts index 425ad9b81a68..d3bba79b9358 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -304,47 +304,47 @@ }; &am33xx_pinmux { - dcan0_pins_default: pinmux_dcan0_pins_default { + dcan0_pins_default: dcan0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */ >; }; - dcan0_pins_sleep: pinmux_dcan0_pins_sleep { + dcan0_pins_sleep: dcan0-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - dcan1_pins_default: pinmux_dcan1_pins_default { + dcan1_pins_default: dcan1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */ >; }; - dcan1_pins_sleep: pinmux_dcan1_pins_sleep { + dcan1_pins_sleep: dcan1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default { + ehrpwm0_pins_default: ehrpwm0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */ >; }; - ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep { + ehrpwm0_pins_sleep: ehrpwm0-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - eth_slave2_pins_default: pinmux_eth_slave2_pins_default { + eth_slave2_pins_default: eth-slave2-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */ @@ -361,7 +361,7 @@ >; }; - eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep { + eth_slave2_pins_sleep: eth-slave2-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -378,35 +378,35 @@ >; }; - gpio_buttons_pins: pinmux_gpio_buttons_pins { + gpio_buttons_pins: gpio-buttons-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */ >; }; - i2c1_pins_default: pinmux_i2c1_pins_default { + i2c1_pins_default: i2c1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */ >; }; - i2c1_pins_gpio: pinmux_i2c1_pins_gpio { + i2c1_pins_gpio: i2c1-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */ >; }; - i2c1_pins_sleep: pinmux_i2c1_pins_sleep { + i2c1_pins_sleep: i2c1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - lcdc_pins_default: pinmux_lcdc_pins_default { + lcdc_pins_default: lcdc-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */ @@ -431,7 +431,7 @@ >; }; - lcdc_pins_sleep: pinmux_lcdc_pins_sleep { + lcdc_pins_sleep: lcdc-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) @@ -456,14 +456,14 @@ >; }; - leds_pins: pinmux_leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */ >; }; - mcasp0_pins_default: pinmux_mcasp0_pins_default { + mcasp0_pins_default: mcasp0-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */ @@ -472,7 +472,7 @@ >; }; - mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep { + mcasp0_pins_sleep: mcasp0-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -481,7 +481,7 @@ >; }; - mmc1_pins_default: pinmux_mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */ @@ -493,7 +493,7 @@ >; }; - mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + mmc1_pins_sleep: mmc1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -505,42 +505,42 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */ >; }; - uart1_pins_default: pinmux_uart1_pins_default { + uart1_pins_default: uart1-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */ >; }; - uart1_pins_sleep: pinmux_uart1_pins_sleep { + uart1_pins_sleep: uart1-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - uart2_pins_default: pinmux_uart2_pins_default { + uart2_pins_default: uart2-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */ >; }; - uart2_pins_sleep: pinmux_uart2_pins_sleep { + uart2_pins_sleep: uart2-sleep-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; - usb_pins: pinmux_usb_pins { + usb_pins: usb-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */ AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */ diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index c447aebd8d86..9305ba9d85ef 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -36,13 +36,13 @@ pinctrl-names = "default"; pinctrl-0 = <&misc_pins>; - misc_pins: misc_pins { + misc_pins: misc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) /* spi0_cs0.gpio0_5 */ >; }; - gpmc_pins: gpmc_pins { + gpmc_pins: gpmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -86,21 +86,21 @@ >; }; - i2c0_pins: i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; - uart0_pins: uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0) >; }; - uart1_pins: uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7) @@ -109,7 +109,7 @@ >; }; - uart2_pins: uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data8.gpio2[14] */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) /* lcd_data9.gpio2[15] */ @@ -118,7 +118,7 @@ >; }; - uart3_pins: uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data10.gpio2[16] */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7) /* lcd_data11.gpio2[17] */ @@ -127,7 +127,7 @@ >; }; - uart4_pins: uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data12.gpio0[8] */ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7) /* lcd_data13.gpio0[9] */ @@ -136,14 +136,14 @@ >; }; - uart5_pins: uart5_pins { + uart5_pins: uart5-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4) /* lcd_data14.uart5_rxd */ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3) /* rmiii1_refclk.uart5_txd */ >; }; - mmc1_pins: mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts index 2e049489ac06..f7fad48e36ed 100644 --- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -37,14 +37,14 @@ }; &am33xx_pinmux { - user_leds_s0: user_leds_s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ >; }; - dcan1_pins: pinmux_dcan1_pins { + dcan1_pins: dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts index 6ed886c3306b..76751a324ad7 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -18,7 +18,7 @@ }; &am33xx_pinmux { - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */ @@ -31,7 +31,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */ diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts index ad3adc7679f9..5a9fcec040fa 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -20,7 +20,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dip_switches>; - dip_switches: pinmux_dip_switches { + dip_switches: dip-switches-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -29,13 +29,13 @@ >; }; - tca6416_pins: pinmux_tca6416_pins { + tca6416_pins: tca6416-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index b2846cd220f0..d28d39728847 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -239,25 +239,25 @@ >; }; - flash_enable: flash-enable { + flash_enable: flash-enable-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ >; }; - imu_interrupt: imu-interrupt { + imu_interrupt: imu-interrupt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */ >; }; - ethernet_interrupt: ethernet-interrupt{ + ethernet_interrupt: ethernet-interrupt-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; - user_leds_s0: user-leds-s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ @@ -280,13 +280,13 @@ >; }; - clkout2_pin: pinmux-clkout2-pin { + clkout2_pin: pinmux-clkout2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; - cpsw_default: cpsw-default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ @@ -304,7 +304,7 @@ >; }; - cpsw_sleep: cpsw-sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -322,7 +322,7 @@ >; }; - davinci_mdio_default: davinci-mdio-default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -330,7 +330,7 @@ >; }; - davinci_mdio_sleep: davinci-mdio-sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 67c7fcc52ce6..75efe1cf1dd2 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -68,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux-user-buttons { + user_buttons_pins: pinmux-user-buttons-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux-user-leds { + user_leds_pins: pinmux-user-leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -85,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux-dcan1 { + dcan1_pins: pinmux-dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -101,7 +101,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: ethernet1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ @@ -142,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux-cb-gpio { + cb_gpio_pins: pinmux-cb-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -176,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux-uart0 { + uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux-uart1 { + uart1_pins: pinmux-uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -192,14 +192,14 @@ >; }; - uart2_pins: pinmux-uart2 { + uart2_pins: pinmux-uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux-uart3 { + uart3_pins: pinmux-uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index ce6cc2b96654..92a1d5fea850 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -90,28 +90,28 @@ pinctrl-names = "default"; pinctrl-0 = <&clkout2_pin>; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_clk.i2c2_sda */ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d0.i2c2_scl */ >; }; - spi1_pins: pinmux_spi1_pins { + spi1_pins: spi1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ @@ -120,7 +120,7 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) @@ -128,27 +128,27 @@ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) /* spi0_cs1.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Port 1 (emac0) */ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0) @@ -186,14 +186,14 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { /* eMMC */ pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) @@ -205,7 +205,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { /* SD cardcage */ pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ @@ -219,7 +219,7 @@ >; }; - lcd_pins_s0: lcd_pins_s0 { + lcd_pins_s0: lcd-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) @@ -244,7 +244,7 @@ >; }; - dcan0_pins: pinmux_dcan0_pins { + dcan0_pins: dcan0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_ctsn.d_can0_tx */ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart1_rtsn.d_can0_rx */ diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index a4509e9e1056..5a87b25a983b 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -26,7 +26,7 @@ compatible = "gpio-keys"; }; - leds: user_leds { + leds: user-leds-pins { compatible = "gpio-leds"; }; @@ -88,13 +88,13 @@ }; &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - i2c1_pins: pinmux_i2c1 { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_crs,i2c1_sda */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_rxerr,i2c1_scl */ @@ -125,7 +125,7 @@ }; &am33xx_pinmux { - accel_pins: pinmux_accel { + accel_pins: accel-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; @@ -172,7 +172,7 @@ }; &am33xx_pinmux { - audio_pins: pinmux_audio { + audio_pins: audio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -223,7 +223,7 @@ }; &am33xx_pinmux { - lcd_pins: pinmux_lcd { + lcd_pins: lcd-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) @@ -292,7 +292,7 @@ }; &am33xx_pinmux { - ethernet_pins: pinmux_ethernet { + ethernet_pins: ethernet-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ @@ -313,7 +313,7 @@ >; }; - mdio_pins: pinmux_mdio { + mdio_pins: mdio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) @@ -357,7 +357,7 @@ &am33xx_pinmux { - sd_pins: pinmux_sd_card { + sd_pins: sd-card-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -368,7 +368,7 @@ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; - emmc_pins: pinmux_emmc { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -384,7 +384,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ >; }; - wireless_pins: pinmux_wireless { + wireless_pins: wireless-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ @@ -491,7 +491,7 @@ }; &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) @@ -532,13 +532,13 @@ }; &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -563,7 +563,7 @@ }; &am33xx_pinmux { - usb_pins: pinmux_usb { + usb_pins: usb-pins { pinctrl-single,pins = < /* USB0 Over-Current (active low) */ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) /* gpmc_a9.gpio1_25 */ @@ -620,14 +620,14 @@ }; &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: user-leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7) /* gpmc_a4.gpio1_20 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ >; }; - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: user-buttons-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a7.gpio1_21 */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 034dc5181679..feb3f4c24978 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -76,7 +76,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet0_pins: pinmux_ethernet0 { + ethernet0_pins: ethernet0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) @@ -89,7 +89,7 @@ >; }; - mdio_pins: pinmux_mdio { + mdio_pins: mdio-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -125,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux-i2c0 { + i2c0_pins: pinmux-i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -165,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux-nandflash { + nandflash_pins: pinmux-nandflash-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux-spi0 { + spi0_pins: pinmux-spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 0ba4883cd4ef..5dfe4d4bab93 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -214,7 +214,7 @@ &P2_17_gpio >; /* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */ - P2_03_gpio: pinmux_P2_03_gpio { + P2_03_gpio: P2-03-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -223,7 +223,7 @@ }; /* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */ - P1_34_gpio: pinmux_P1_34_gpio { + P1_34_gpio: P1-34-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -232,7 +232,7 @@ }; /* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */ - P2_19_gpio: pinmux_P2_19_gpio { + P2_19_gpio: P2-19-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -241,7 +241,7 @@ }; /* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */ - P2_24_gpio: pinmux_P2_24_gpio { + P2_24_gpio: P2-24-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -250,7 +250,7 @@ }; /* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */ - P2_33_gpio: pinmux_P2_33_gpio { + P2_33_gpio: P2-33-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -259,7 +259,7 @@ }; /* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */ - P2_22_gpio: pinmux_P2_22_gpio { + P2_22_gpio: P2-22-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -268,7 +268,7 @@ }; /* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */ - P2_18_gpio: pinmux_P2_18_gpio { + P2_18_gpio: P2-18-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -277,7 +277,7 @@ }; /* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */ - P2_10_gpio: pinmux_P2_10_gpio { + P2_10_gpio: P2-10-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -286,7 +286,7 @@ }; /* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */ - P2_06_gpio: pinmux_P2_06_gpio { + P2_06_gpio: P2-06-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -295,7 +295,7 @@ }; /* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */ - P2_04_gpio: pinmux_P2_04_gpio { + P2_04_gpio: P2-04-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -304,7 +304,7 @@ }; /* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */ - P2_02_gpio: pinmux_P2_02_gpio { + P2_02_gpio: P2-02-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7) >; @@ -313,7 +313,7 @@ }; /* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */ - P2_08_gpio: pinmux_P2_08_gpio { + P2_08_gpio: P2-08-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) >; @@ -322,7 +322,7 @@ }; /* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */ - P2_17_gpio: pinmux_P2_17_gpio { + P2_17_gpio: P2-17-gpio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7) >; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 3894f14a914c..625db3bcd365 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux-user-leds { + user_leds_pins: pinmux-user-leds-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux-dcan1 { + dcan1_pins: pinmux-dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux-ethernet1 { + ethernet1_pins: pinmux-ethernet1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux-user-gpios { + user_gpios_pins: pinmux-user-gpios-pins { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux-mmc1 { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux-uart0 { + uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux-uart2 { + uart2_pins: pinmux-uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi index f9b7e774ac48..a138eb356874 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi +++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi @@ -4,7 +4,7 @@ */ &am33xx_pinmux { - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ @@ -22,7 +22,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -40,7 +40,7 @@ >; }; - usb_hub_ctrl: usb_hub_ctrl { + usb_hub_ctrl: usb-hub-ctrl-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */ >; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts index a2676d10c24a..5522759def26 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts @@ -28,7 +28,7 @@ }; &am33xx_pinmux { - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < /* gpmc_a9.gpio1_25: RADIO_EN */ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7) @@ -53,14 +53,14 @@ >; }; - bluetooth_pins: pinmux_bluetooth_pins { + bluetooth_pins: bluetooth-pins { pinctrl-single,pins = < /* event_intr0.gpio0_19 */ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < /* uart1_rxd */ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts index d6ef19311a91..b1b400226d83 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts @@ -19,7 +19,7 @@ }; &am33xx_pinmux { - bb_spi0_pins: pinmux_bb_spi0_pins { + bb_spi0_pins: bb-spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index efbe93135dbe..32669346cefe 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -17,13 +17,13 @@ }; &am33xx_pinmux { - mpu6050_pins: pinmux_mpu6050_pins { + mpu6050_pins: mpu6050-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ >; }; - lps3331ap_pins: pinmux_lps3331ap_pins { + lps3331ap_pins: lps3331ap-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index 81e4453687ba..596774c84744 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -64,7 +64,7 @@ &am33xx_pinmux { /* Display */ - lcd_pins_default: lcd_pins_default { + lcd_pins_default: lcd-default-pins { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) @@ -105,7 +105,7 @@ >; }; - lcd_pins_sleep: lcd_pins_sleep { + lcd_pins_sleep: lcd-sleep-pins { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index c497200f9cb0..9297cb1efcd4 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -366,14 +366,14 @@ pinctrl-names = "default"; pinctrl-0 = <&clkout2_pin>; - clkout2_pin: pinmux_clkout2_pin { + clkout2_pin: clkout2-pins { pinctrl-single,pins = < /* xdma_event_intr1.clkout2 */ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6) >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -392,7 +392,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -411,14 +411,14 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -426,13 +426,13 @@ >; }; - ehrpwm1_pins: pinmux_ehrpwm1 { + ehrpwm1_pins: ehrpwm1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */ >; }; - emmc_pins: pinmux_emmc_pins { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2) AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) @@ -447,20 +447,20 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5) >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3) AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3) @@ -471,7 +471,7 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0) @@ -480,7 +480,7 @@ >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0) @@ -489,21 +489,21 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) >; }; - uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6) >; }; - user_leds_s0: user_leds_s0 { + user_leds_s0: user-leds-s0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7) diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 73b5d1a024bd..d35ed80de0f0 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -213,7 +213,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lwb_pins>; - audio_pins: pinmux_audio_pins { + audio_pins: audio-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -223,31 +223,31 @@ >; }; - audio_pa_pins: pinmux_audio_pa_pins { + audio_pa_pins: audio-pa-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ >; }; - audio_mclk_pins: pinmux_audio_mclk_pins { + audio_mclk_pins: audio-mclk-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; - backlight0_pins: pinmux_backlight0_pins { + backlight0_pins: backlight0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; - backlight1_pins: pinmux_backlight1_pins { + backlight1_pins: backlight1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ >; }; - lcd_pins: pinmux_lcd_pins { + lcd_pins: lcd-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) @@ -272,7 +272,7 @@ >; }; - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* gpmc_a6.gpio1_22 */ @@ -281,42 +281,42 @@ >; }; - uart0_pins: pinmux_uart0_pins { + uart0_pins: uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* gpmc_wait0.uart4_rxd */ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* gpmc_wpn.uart4_txd */ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) @@ -335,7 +335,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -354,7 +354,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) @@ -364,7 +364,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) @@ -372,19 +372,19 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; - emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins { + emmc_pwrseq_pins: emmc-pwrseq-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a4.gpio1_20 */ >; }; - emmc_pins: pinmux_emmc_pins { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -399,20 +399,20 @@ >; }; - ehrpwm1_pins: pinmux_ehrpwm1a_pins { + ehrpwm1_pins: ehrpwm1a-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a */ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; - rtc0_irq_pins: pinmux_rtc0_irq_pins { + rtc0_irq_pins: rtc0-irq-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */ @@ -422,7 +422,7 @@ >; }; - lwb_pins: pinmux_lwb_pins { + lwb_pins: lwb-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 6a103f17585b..cb27ff464dbe 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -49,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux-mcasp0 { + mcasp0_pins: pinmux-mcasp0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -90,7 +90,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux-dcan1 { + dcan1_pins: pinmux-dcan1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -106,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux-ethernet1 { + ethernet1_pins: pinmux-ethernet1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -146,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux-mmc1 { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -176,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux-uart0 { + uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux-uart1 { + uart1_pins: pinmux-uart1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index 3642cfc80194..afae7a4d232e 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -72,7 +72,7 @@ #include "tps65910.dtsi" &omap3_pmx_core { - tps_pins: pinmux_tps_pins { + tps_pins: tps-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ >; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index 75ad42179aee..16b8968d5be8 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -197,7 +197,7 @@ }; &omap3_pmx_core { - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ @@ -206,7 +206,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 11618aa501fc..af9df15274be 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -242,7 +242,7 @@ &omap3_pmx_core { - ethernet_pins: pinmux_ethernet_pins { + ethernet_pins: ethernet-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ @@ -257,28 +257,28 @@ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - leds_pins: pinmux_leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -291,19 +291,19 @@ >; }; - pwm_pins: pinmux_pwm_pins { + pwm_pins: pwm-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -329,7 +329,7 @@ >; }; - hsusb1_rst_pins: pinmux_hsusb1_rst_pins { + hsusb1_rst_pins: hsusb1-rst-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; @@ -338,7 +338,7 @@ &omap3_pmx_core2 { - hsusb1_pins: pinmux_hsusb1_pins { + hsusb1_pins: hsusb1-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index f7b680f6c48a..bd0a6c95afa1 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -181,20 +181,20 @@ &omap3_pmx_core { - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { + wl12xx_buffer_pins: wl12xx-buffer-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ @@ -210,19 +210,19 @@ >; }; - rtc_pins: pinmux_rtc_pins { + rtc_pins: rtc-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ >; }; - tsc2004_pins: pinmux_tsc2004_pins { + tsc2004_pins: tsc2004-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ @@ -235,7 +235,7 @@ &omap3_pmx_wkup { - wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + wl12xx_wkup_pins: wl12xx-wkup-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 791478e81c5a..ac082e83a9a2 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -285,7 +285,7 @@ }; &pincntl { - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ @@ -299,19 +299,19 @@ >; }; - usb0_pins: pinmux_usb0_pins { + usb0_pins: usb0-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ >; }; - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */ DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */ @@ -336,7 +336,7 @@ >; }; - gpio2_pins: pinmux_gpio2_pins { + gpio2_pins: gpio2-pins { pinctrl-single,pins = < DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */ DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */ @@ -349,7 +349,7 @@ >; }; - gpio4_pins: pinmux_gpio4_pins { + gpio4_pins: gpio4-pins { pinctrl-single,pins = < /* The PLL doesn't react well to the SPI controller reset, so * we force the CS lines to pull up as GPIOs until we're ready. @@ -364,14 +364,14 @@ >; }; - spi2_pins: pinmux_spi2_pins { + spi2_pins: spi2-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */ DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */ >; }; - spi4_pins: pinmux_spi4_pins { + spi4_pins: spi4-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0a7c, 0x20) DM814X_IOPAD(0x0b74, 0x20) diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 0861e868b75a..9ec75d03eaff 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -38,20 +38,20 @@ pinctrl-names = "default"; pinctrl-0 = <&cm_t43_led_pins>; - cm_t43_led_pins: cm_t43_led_pins { + cm_t43_led_pins: cm-t43-led-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa78, MUX_MODE7) >; }; - i2c0_pins: i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - emmc_pins: emmc_pins { + emmc_pins: emmc-pins { pinctrl-single,pins = < AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */ AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */ @@ -66,7 +66,7 @@ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins: spi0-pins { pinctrl-single,pins = < AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */ AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ @@ -75,7 +75,7 @@ >; }; - nand_flash_x8: nand_flash_x8 { + nand_flash_x8: nand-flash-x8-pins { pinctrl-single,pins = < AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0) AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0) @@ -95,7 +95,7 @@ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ @@ -128,7 +128,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 46d5361fe876..f7aad0323d19 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -153,45 +153,45 @@ pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>; pinctrl-1 = <&wlan_pins_sleep>; - ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + ddr3_vtt_toggle_default: ddr-vtt-toggle-default-pins { pinctrl-single,pins = < 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */ >; }; - i2c0_pins: i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; - ecap0_pins: backlight_pins { + ecap0_pins: backlight-pins { pinctrl-single,pins = < AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; - pixcir_ts_pins: pixcir_ts_pins { + pixcir_ts_pins: pixcir-ts-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ @@ -209,7 +209,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -227,7 +227,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ @@ -235,7 +235,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -243,7 +243,7 @@ >; }; - nand_flash_x8: nand_flash_x8 { + nand_flash_x8: nand-flash-x8-pins { pinctrl-single,pins = < AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ @@ -263,7 +263,7 @@ >; }; - dss_pins: dss_pins { + dss_pins: dss-pins { pinctrl-single,pins = < AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) @@ -297,42 +297,42 @@ >; }; - display_mux_pins: display_mux_pins { + display_mux_pins: display-mux-pins { pinctrl-single,pins = < /* GPIO 5_8 to select LCD / HDMI */ AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; - dcan0_default: dcan0_default_pins { + dcan0_default: dcan0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ >; }; - dcan0_sleep: dcan0_sleep_pins { + dcan0_sleep: dcan0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ >; }; - dcan1_default: dcan1_default_pins { + dcan1_default: dcan1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ >; }; - dcan1_sleep: dcan1_sleep_pins { + dcan1_sleep: dcan1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ >; }; - vpfe0_pins_default: vpfe0_pins_default { + vpfe0_pins_default: vpfe0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ @@ -350,7 +350,7 @@ >; }; - vpfe0_pins_sleep: vpfe0_pins_sleep { + vpfe0_pins_sleep: vpfe0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ @@ -368,7 +368,7 @@ >; }; - vpfe1_pins_default: vpfe1_pins_default { + vpfe1_pins_default: vpfe1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ @@ -386,7 +386,7 @@ >; }; - vpfe1_pins_sleep: vpfe1_pins_sleep { + vpfe1_pins_sleep: vpfe1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ @@ -404,7 +404,7 @@ >; }; - mmc3_pins_default: pinmux_mmc3_pins_default { + mmc3_pins_default: mmc3-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ @@ -415,7 +415,7 @@ >; }; - mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + mmc3_pins_sleep: mmc3-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ @@ -426,7 +426,7 @@ >; }; - wlan_pins_default: pinmux_wlan_pins_default { + wlan_pins_default: wlan-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ @@ -434,7 +434,7 @@ >; }; - wlan_pins_sleep: pinmux_wlan_pins_sleep { + wlan_pins_sleep: wlan-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ @@ -442,7 +442,7 @@ >; }; - uart3_pins: uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ @@ -451,7 +451,7 @@ >; }; - mcasp1_pins: mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -460,7 +460,7 @@ >; }; - mcasp1_sleep_pins: mcasp1_sleep_pins { + mcasp1_sleep_pins: mcasp1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -469,13 +469,13 @@ >; }; - gpio0_pins: gpio0_pins { + gpio0_pins: gpio0-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ >; }; - emmc_pins_default: emmc_pins_default { + emmc_pins_default: emmc-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ @@ -490,7 +490,7 @@ >; }; - emmc_pins_sleep: emmc_pins_sleep { + emmc_pins_sleep: emmc-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ @@ -505,19 +505,19 @@ >; }; - beeper_pins_default: beeper_pins_default { + beeper_pins_default: beeper-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ >; }; - beeper_pins_sleep: beeper_pins_sleep { + beeper_pins_sleep: beeper-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */ >; }; - unused_pins: unused_pins { + unused_pins: unused-pins { pinctrl-single,pins = < AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -566,7 +566,7 @@ >; }; - debugss_pins: pinmux_debugss_pins { + debugss_pins: debugss-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN) AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN) @@ -578,7 +578,7 @@ >; }; - uart0_pins_default: uart0_pins_default { + uart0_pins_default: uart0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ @@ -587,7 +587,7 @@ >; }; - uart0_pins_sleep: uart0_pins_sleep { + uart0_pins_sleep: uart0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */ @@ -596,7 +596,7 @@ >; }; - matrix_keypad_default: matrix_keypad_default { + matrix_keypad_default: matrix-keypad-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) @@ -605,7 +605,7 @@ >; }; - matrix_keypad_sleep: matrix_keypad_sleep { + matrix_keypad_sleep: matrix-keypad-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index e46cf2a9d075..863552393c07 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -171,41 +171,41 @@ }; &am43xx_pinmux { - gpio_keys_pins_default: gpio_keys_pins_default { + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */ >; }; - i2c0_pins_default: i2c0_pins_default { + i2c0_pins_default: i2c0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - i2c0_pins_sleep: i2c0_pins_sleep { + i2c0_pins_sleep: i2c0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; - i2c2_pins_default: i2c2_pins_default { + i2c2_pins_default: i2c2-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ >; }; - i2c2_pins_sleep: i2c2_pins_sleep { + i2c2_pins_sleep: i2c2-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; - mmc1_pins_default: pinmux_mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ @@ -217,7 +217,7 @@ >; }; - mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + mmc1_pins_sleep: mmc1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -229,7 +229,7 @@ >; }; - spi1_pins_default: spi1_pins_default { + spi1_pins_default: spi1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2) /* mii1_col.spi1_sclk */ AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2) /* mii1_rx_er.spi1_d1 */ @@ -238,7 +238,7 @@ >; }; - spi1_pins_sleep: spi1_pins_sleep { + spi1_pins_sleep: spi1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -247,13 +247,13 @@ >; }; - ecap0_pins_default: backlight_pins_default { + ecap0_pins_default: backlight-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ @@ -270,7 +270,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -287,7 +287,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ @@ -295,7 +295,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -303,7 +303,7 @@ >; }; - qspi_pins_default: qspi_pins_default { + qspi_pins_default: qspi-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ @@ -314,7 +314,7 @@ >; }; - qspi_pins_sleep: qspi_pins_sleep{ + qspi_pins_sleep: qspi-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index 8ea3780f939d..34a5407bee15 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -16,7 +16,7 @@ }; &am43xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ @@ -29,7 +29,7 @@ >; }; - dss_pinctrl_default: dss_pinctrl_default { + dss_pinctrl_default: dss-pinctrl-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */ AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2) @@ -64,7 +64,7 @@ >; }; - uart0_pins_default: uart0_pins_default { + uart0_pins_default: uart0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) @@ -73,27 +73,27 @@ >; }; - i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */ AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */ >; }; - i2c2_pins: i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; - usb2_phy1_default: usb2_phy1_default { + usb2_phy1_default: usb2-phy1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) >; }; - usb2_phy2_default: usb2_phy2_default { + usb2_phy2_default: usb2-phy2-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) >; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 511a02e13e2c..9c97006ffd5b 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -159,7 +159,7 @@ }; &am43xx_pinmux { - matrix_keypad_pins: matrix_keypad_pins { + matrix_keypad_pins: matrix-keypad-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ @@ -168,7 +168,7 @@ >; }; - leds_pins: leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ @@ -177,21 +177,21 @@ >; }; - i2c0_pins: i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ @@ -203,20 +203,20 @@ >; }; - ecap0_pins: backlight_pins { + ecap0_pins: backlight-pins { pinctrl-single,pins = < AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ >; }; - edt_ft5306_ts_pins: edt_ft5306_ts_pins { + edt_ft5306_ts_pins: edt-ft5306-ts-pins { pinctrl-single,pins = < AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ >; }; - vpfe0_pins_default: vpfe0_pins_default { + vpfe0_pins_default: vpfe0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ @@ -236,7 +236,7 @@ >; }; - vpfe0_pins_sleep: vpfe0_pins_sleep { + vpfe0_pins_sleep: vpfe0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) @@ -256,13 +256,13 @@ >; }; - clkout1_pin: pinmux_clkout1_pin { + clkout1_pin: clkout1-pins { pinctrl-single,pins = < 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ @@ -294,7 +294,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -326,7 +326,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ @@ -334,7 +334,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -342,7 +342,7 @@ >; }; - dss_pins: dss_pins { + dss_pins: dss-pins { pinctrl-single,pins = < AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) @@ -376,7 +376,7 @@ >; }; - qspi_pins: qspi_pins { + qspi_pins: qspi-pins { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ @@ -387,7 +387,7 @@ >; }; - mcasp1_pins: mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ @@ -396,7 +396,7 @@ >; }; - mcasp1_pins_sleep: mcasp1_pins_sleep { + mcasp1_pins_sleep: mcasp1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -405,25 +405,25 @@ >; }; - lcd_pins: lcd_pins { + lcd_pins: lcd-pins { pinctrl-single,pins = < AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; - usb1_pins: usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ >; }; - usb2_pins: usb2_pins { + usb2_pins: usb2-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ >; }; - mmc3_pins_default: pinmux_mmc3_pins_default { + mmc3_pins_default: mmc3-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */ @@ -434,7 +434,7 @@ >; }; - mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + mmc3_pins_sleep: mmc3-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */ @@ -445,21 +445,21 @@ >; }; - wlan_pins_default: pinmux_wlan_pins_default { + wlan_pins_default: wlan-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ >; }; - wlan_pins_sleep: pinmux_wlan_pins_sleep { + wlan_pins_sleep: wlan-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ >; }; - uart1_bt_pins_default: pinmux_uart1_bt_pins_default { + uart1_bt_pins_default: uart1-bt-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ @@ -469,7 +469,7 @@ >; }; - uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep { + uart1_bt_pins_sleep: uart1-bt-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9fc915a2582e..9193a4cfba78 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -141,7 +141,7 @@ pinctrl-names = "default"; pinctrl-0 = <&unused_pins>; - unused_pins: unused_pins { + unused_pins: unused-pins { pinctrl-single,pins = < AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -175,7 +175,7 @@ >; }; - cpsw_default: cpsw_default { + cpsw_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave 1 */ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ @@ -190,7 +190,7 @@ >; }; - cpsw_sleep: cpsw_sleep { + cpsw_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 reset value */ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -205,7 +205,7 @@ >; }; - davinci_mdio_default: davinci_mdio_default { + davinci_mdio_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ @@ -213,7 +213,7 @@ >; }; - davinci_mdio_sleep: davinci_mdio_sleep { + davinci_mdio_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < /* MDIO reset value */ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -221,14 +221,14 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { + i2c0_pins: i2c0-pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; - nand_flash_x8_default: nand_flash_x8_default { + nand_flash_x8_default: nand-flash-x8-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ @@ -249,7 +249,7 @@ >; }; - nand_flash_x8_sleep: nand_flash_x8_sleep { + nand_flash_x8_sleep: nand-flash-x8-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) @@ -270,26 +270,26 @@ >; }; - ecap0_pins_default: backlight_pins_default { + ecap0_pins_default: backlight-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; - ecap0_pins_sleep: backlight_pins_sleep { + ecap0_pins_sleep: backlight-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */ >; }; - spi0_pins_default: pinmux_spi0_pins_default { + spi0_pins_default: spi0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ @@ -298,7 +298,7 @@ >; }; - spi0_pins_sleep: pinmux_spi0_pins_sleep { + spi0_pins_sleep: spi0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -307,7 +307,7 @@ >; }; - spi1_pins_default: pinmux_spi1_pins_default { + spi1_pins_default: spi1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ @@ -316,7 +316,7 @@ >; }; - spi1_pins_sleep: pinmux_spi1_pins_sleep { + spi1_pins_sleep: spi1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) @@ -325,19 +325,19 @@ >; }; - mmc1_pins_default: pinmux_mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; - mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + mmc1_pins_sleep: mmc1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7) >; }; - matrix_keypad_default: matrix_keypad_default { + matrix_keypad_default: matrix-keypad-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */ AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */ @@ -350,7 +350,7 @@ >; }; - matrix_keypad_sleep: matrix_keypad_sleep { + matrix_keypad_sleep: matrix-keypad-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7) AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7) @@ -363,7 +363,7 @@ >; }; - qspi1_pins_default: qspi1_pins_default { + qspi1_pins_default: qspi1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3) AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2) @@ -374,7 +374,7 @@ >; }; - qspi1_pins_sleep: qspi1_pins_sleep { + qspi1_pins_sleep: qspi1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -385,25 +385,25 @@ >; }; - pixcir_ts_pins_default: pixcir_ts_pins_default { + pixcir_ts_pins_default: pixcir-ts-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ >; }; - pixcir_ts_pins_sleep: pixcir_ts_pins_sleep { + pixcir_ts_pins_sleep: pixcir-ts-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ >; }; - hdq_pins: pinmux_hdq_pins { + hdq_pins: hdq-pins { pinctrl-single,pins = < AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ >; }; - dss_pins: dss_pins { + dss_pins: dss-pins { pinctrl-single,pins = < AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) @@ -436,14 +436,14 @@ >; }; - display_mux_pins: display_mux_pins { + display_mux_pins: display-mux-pins { pinctrl-single,pins = < /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; - vpfe1_pins_default: vpfe1_pins_default { + vpfe1_pins_default: vpfe1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ @@ -461,7 +461,7 @@ >; }; - vpfe1_pins_sleep: vpfe1_pins_sleep { + vpfe1_pins_sleep: vpfe1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) @@ -479,7 +479,7 @@ >; }; - uart0_pins_default: uart0_pins_default { + uart0_pins_default: uart0-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ @@ -488,7 +488,7 @@ >; }; - uart0_pins_sleep: uart0_pins_sleep { + uart0_pins_sleep: uart0-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) @@ -497,31 +497,31 @@ >; }; - usb2_phy1_default: usb2_phy1_default { + usb2_phy1_default: usb2-phy1-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0) >; }; - usb2_phy1_sleep: usb2_phy1_sleep { + usb2_phy1_sleep: usb2-phy1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; - usb2_phy2_default: usb2_phy2_default { + usb2_phy2_default: usb2-phy2-default-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0) >; }; - usb2_phy2_sleep: usb2_phy2_sleep { + usb2_phy2_sleep: usb2-phy2-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; - mcasp1_pins: mcasp1_pins { + mcasp1_pins: mcasp1-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ @@ -530,7 +530,7 @@ >; }; - mcasp1_sleep_pins: mcasp1_sleep_pins { + mcasp1_sleep_pins: mcasp1-sleep-pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7) diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2fc9a5d5e0c0..4774aa05f101 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -77,40 +77,40 @@ }; &dra7_pmx_core { - leds_pins_default: leds_pins_default { + leds_pins_default: leds-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */ >; }; - i2c1_pins_default: i2c1_pins_default { + i2c1_pins_default: i2c1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ >; }; - i2c3_pins_default: i2c3_pins_default { + i2c3_pins_default: i2c3-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ >; }; - i2c4_pins_default: i2c4_pins_default { + i2c4_pins_default: i2c4-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */ DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */ >; }; - tps659038_pins_default: tps659038_pins_default { + tps659038_pins_default: tps659038-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ >; }; - mmc2_pins_default: mmc2_pins_default { + mmc2_pins_default: mmc2-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -125,7 +125,7 @@ >; }; - qspi1_pins: pinmux_qspi1_pins { + qspi1_pins: qspi1-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */ @@ -136,7 +136,7 @@ >; }; - cpsw_pins_default: cpsw_pins_default { + cpsw_pins_default: cpsw-default-pins { pinctrl-single,pins = < /* Slave at addr 0x0 */ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */ @@ -168,7 +168,7 @@ >; }; - cpsw_pins_sleep: cpsw_pins_sleep { + cpsw_pins_sleep: cpsw-sleep-pins { pinctrl-single,pins = < /* Slave 1 */ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) @@ -200,7 +200,7 @@ >; }; - davinci_mdio_pins_default: davinci_mdio_pins_default { + davinci_mdio_pins_default: davinci-mdio-default-pins { pinctrl-single,pins = < /* MDIO */ DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */ @@ -208,20 +208,20 @@ >; }; - davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { + davinci_mdio_pins_sleep: davinci-mdio-sleep-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15) DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15) >; }; - ads7846_pins: pinmux_ads7846_pins { + ads7846_pins: ads7846-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */ >; }; - mcasp3_pins_default: mcasp3_pins_default { + mcasp3_pins_default: mcasp3-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ @@ -230,7 +230,7 @@ >; }; - mcasp3_pins_sleep: mcasp3_pins_sleep { + mcasp3_pins_sleep: mcasp3-sleep-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 7f092a8811e8..43e3623f079c 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -158,14 +158,14 @@ }; &dra7_pmx_core { - dcan1_pins_default: dcan1_pins_default { + dcan1_pins_default: dcan1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */ >; }; - dcan1_pins_sleep: dcan1_pins_sleep { + dcan1_pins_sleep: dcan1-sleep-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index beef63e8a005..363115afb0a4 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -20,14 +20,14 @@ }; &dra7_pmx_core { - uart3_pins_default: uart3_pins_default { + uart3_pins_default: uart3-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; - mmc1_pins_default: mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -40,33 +40,33 @@ >; }; - usb1_pins: pinmux_usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; - i2c5_pins_default: i2c5_pins_default { + i2c5_pins_default: i2c5-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ >; }; - lcd_pins_default: lcd_pins_default { + lcd_pins_default: lcd-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */ >; }; - hdmi_pins: pinmux_hdmi_pins { + hdmi_pins: hdmi-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ >; }; - hdmi_conn_pins: pinmux_hdmi_conn_pins { + hdmi_conn_pins: hdmi-conn-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */ >; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 7075df6549e9..fec7269088d1 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -225,7 +225,7 @@ pinctrl_pio_io_reset: gpio_io_reset { pinmux = <PIN_PB30__GPIO>; bias-disable; - drive-open-drain = <1>; + drive-open-drain; output-low; }; pinctrl_pio_input: gpio_input { diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index abe27adfa4d6..465664628419 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -211,7 +211,7 @@ pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA <PIN_PD13__FLEXCOM4_IO1>; //CLK bias-disable; - drive-open-drain = <1>; + drive-open-drain; }; pinctrl_pwm0 { diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index b99a4fb44a36..9d58a3931207 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -300,3 +300,63 @@ dmas = <0>, <0>; /* Do not use DMA for dbgu */ }; + +&pioA { + gpio-line-names = + /* 0 */ "SUP-A", "SUP-B", "SUP-C", "SIG<LEV", + /* 4 */ "", "/RFRST", "", "", + /* 8 */ "/ADD", "", "/LOOP1", "/LOOP2", + /* 12 */ "", "", "", "", + /* 16 */ "LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED", + /* 20 */ "LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "SDA", "SCL"; +}; + +&pioB { + gpio-line-names = + /* 0 */ "", "", "", "", + /* 4 */ "", "", "", "", + /* 8 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "SIG<LIN", "SIG>LIN", + /* 28 */ "RXD", "TXD", "BRX", "BTX"; +}; + +&pioC { + gpio-line-names = + /* 0 */ "ETX0", "ETX1", "ERX0", "ERX1", + /* 4 */ "ETXEN", "ECRSDV", "ERXER", "EREFCK", + /* 8 */ "EMDC", "EMDIO", "", "", + /* 12 */ "", "", "", "/ILIM", + /* 16 */ "BCK", "LRCK", "DIN", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "", "VBUS"; +}; + +&pioD { + gpio-line-names = + /* 0 */ "I1", "I2", "O1", "EXTVEN", + /* 4 */ "", "456KHZ", "VCTRL", "SYNCSEL", + /* 8 */ "STEREO", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", ">LIN", "LIN>", "", + /* 20 */ "VREFEN", "", "", "", + /* 24 */ "", "", "VINOK", "", + /* 28 */ "POEOK", "USBON", "POELOAD", ""; +}; + +&pioE { + gpio-line-names = + /* 0 */ "", "", "", "", + /* 4 */ "", "", "", "", + /* 8 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "ALE", "CLE", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "", "/ETHINT"; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 6f9004ebf424..37b500f6f395 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -102,7 +102,7 @@ reg = <0xffffff00 0x100>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 789fe356dbf6..16e3b24b4ddd 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -115,7 +115,7 @@ reg = <0xffffee00 0x200>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ee0bd1aceb3f..fe9ead867e2a 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -599,7 +599,7 @@ }; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3ce9ea987312..ee5e6ed44dd4 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -101,7 +101,7 @@ atmel,external-irqs = <30 31>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 708e1646b7f4..738a43ffd228 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -41,7 +41,7 @@ atmel,adc-startup-time = <40>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index d2f13afb35ea..ec3c77221881 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -26,7 +26,7 @@ >; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index 48c2bc4a7753..c9cfb93092ee 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -25,7 +25,7 @@ >; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 95f5d76234db..498cb92b29f9 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -129,7 +129,7 @@ reg = <0xffffea00 0x200>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -923,7 +923,7 @@ status = "disabled"; }; - clk32k: sckc@fffffd50 { + clk32k: clock-controller@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 83114d26f10d..0e28101b26bf 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -118,7 +118,7 @@ reg = <0xffffea00 0x200>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; #clock-cells = <2>; @@ -146,28 +146,11 @@ clocks = <&clk32k>; }; - sckc@fffffe50 { + clk32k: clock-controller@fffffe50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffe50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; mmc0: mmc@f0008000 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 364a2ff0a763..d7e8a115c916 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -763,7 +763,7 @@ }; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -799,7 +799,7 @@ status = "disabled"; }; - clk32k: sckc@fffffd50 { + clk32k: clock-controller@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 0fe8802e1242..7036f5f04571 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -27,7 +27,7 @@ >; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 0bfa21f18f87..eb03b0497e37 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -26,7 +26,7 @@ >; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 0c26c925761b..0123ee47151c 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -126,7 +126,7 @@ reg = <0xffffea00 0x200>; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -154,7 +154,7 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; - clk32k: sckc@fffffe50 { + clk32k: clock-controller@fffffe50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffe50 0x4>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index ca240cd6f6c3..469d0f7d5185 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -48,6 +48,13 @@ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf */ +/ { + pmic-temp { + compatible = "iio-hwmon"; + io-channels = <&axp_adc 4>; /* Internal temperature */ + }; +}; + &axp209 { compatible = "x-powers,axp209"; interrupt-controller; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index fe3f9a970b18..ae8d9fa09d16 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -116,7 +116,7 @@ }; &pincntl { - sd1_pins: pinmux_sd1_pins { + sd1_pins: sd1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ @@ -129,13 +129,13 @@ >; }; - usb0_pins: pinmux_usb0_pins { + usb0_pins: usb0-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ >; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 79ccdd4470f4..f3e2ecf6d723 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -71,7 +71,7 @@ }; &pincntl { - sd2_pins: pinmux_sd2_pins { + sd2_pins: sd2-pins { pinctrl-single,pins = < DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */ DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */ @@ -87,13 +87,13 @@ >; }; - usb0_pins: pinmux_usb0_pins { + usb0_pins: usb0-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ >; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 244a957f9ba3..1d80288f6ba5 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -30,7 +30,7 @@ }; &dm816x_pinmux { - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ @@ -39,7 +39,7 @@ >; }; - mmc_pins: pinmux_mmc_pins { + mmc_pins: mmc-pins { pinctrl-single,pins = < DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ @@ -53,19 +53,19 @@ >; }; - usb0_pins: pinmux_usb0_pins { + usb0_pins: usb0-pins { pinctrl-single,pins = < DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb1_pins { + usb1_pins: usb1-pins { pinctrl-single,pins = < DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; - nandflash_pins: nandflash_pins { + nandflash_pins: nandflash-pins { pinctrl-single,pins = < DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/ DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */ diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 577114c4c20a..2f6ac267fc15 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -108,7 +108,7 @@ }; &pincntl { - sd1_pins: pinmux_sd1_pins { + sd1_pins: sd1-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ @@ -121,7 +121,7 @@ >; }; - usb0_pins: pinmux_usb0_pins { + usb0_pins: usb0-pins { pinctrl-single,pins = < DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ >; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 8cbcf55a5a33..46efbaa67a8e 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -152,14 +152,14 @@ }; &dra7_pmx_core { - dcan1_pins_default: dcan1_pins_default { + dcan1_pins_default: dcan1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; - dcan1_pins_sleep: dcan1_pins_sleep { + dcan1_pins_sleep: dcan1-sleep-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi index aa0947266526..cb1a682c26cd 100644 --- a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi @@ -6,7 +6,7 @@ */ &dra7_pmx_core { - mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu { + mmc1_pins_default_no_clk_pu: mmc1-default-no-clk-pu-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index c79ba671ec2b..31ab0c60ca75 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -197,14 +197,14 @@ }; &dra7_pmx_core { - dcan1_pins_default: dcan1_pins_default { + dcan1_pins_default: dcan1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; - dcan1_pins_sleep: dcan1_pins_sleep { + dcan1_pins_sleep: dcan1-sleep-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi index 34eea3c048bd..d006f1dfdeb5 100644 --- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi @@ -32,7 +32,7 @@ */ &dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -43,7 +43,7 @@ >; }; - mmc1_pins_sdr12: mmc1_pins_sdr12 { + mmc1_pins_sdr12: mmc1-sdr12-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -54,7 +54,7 @@ >; }; - mmc1_pins_hs: mmc1_pins_hs { + mmc1_pins_hs: mmc1-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -65,7 +65,7 @@ >; }; - mmc1_pins_sdr25: mmc1_pins_sdr25 { + mmc1_pins_sdr25: mmc1-sdr25-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -76,7 +76,7 @@ >; }; - mmc1_pins_sdr50: mmc1_pins_sdr50 { + mmc1_pins_sdr50: mmc1-sdr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -87,7 +87,7 @@ >; }; - mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 { + mmc1_pins_ddr50_rev10: mmc1-ddr50-rev10-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ @@ -98,7 +98,7 @@ >; }; - mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 { + mmc1_pins_ddr50_rev20: mmc1-ddr50-rev20-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -109,7 +109,7 @@ >; }; - mmc1_pins_sdr104: mmc1_pins_sdr104 { + mmc1_pins_sdr104: mmc1-sdr104-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -120,7 +120,7 @@ >; }; - mmc2_pins_default: mmc2_pins_default { + mmc2_pins_default: mmc2-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -135,7 +135,7 @@ >; }; - mmc2_pins_hs: mmc2_pins_hs { + mmc2_pins_hs: mmc2-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -150,7 +150,7 @@ >; }; - mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 { + mmc2_pins_ddr_rev10: mmc2-ddr-rev10-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ @@ -165,7 +165,7 @@ >; }; - mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -180,7 +180,7 @@ >; }; - mmc2_pins_hs200: mmc2_pins_hs200 { + mmc2_pins_hs200: mmc2-hs200-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -195,7 +195,7 @@ >; }; - mmc4_pins_default: mmc4_pins_default { + mmc4_pins_default: mmc4-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi index b9d040135c5f..e2fdb0702f5c 100644 --- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi @@ -30,7 +30,7 @@ */ &dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -41,7 +41,7 @@ >; }; - mmc1_pins_sdr12: mmc1_pins_sdr12 { + mmc1_pins_sdr12: mmc1-sdr12-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -52,7 +52,7 @@ >; }; - mmc1_pins_hs: mmc1_pins_hs { + mmc1_pins_hs: mmc1-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -63,7 +63,7 @@ >; }; - mmc1_pins_sdr25: mmc1_pins_sdr25 { + mmc1_pins_sdr25: mmc1-sdr25-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -74,7 +74,7 @@ >; }; - mmc1_pins_sdr50: mmc1_pins_sdr50 { + mmc1_pins_sdr50: mmc1-sdr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -85,7 +85,7 @@ >; }; - mmc1_pins_ddr50: mmc1_pins_ddr50 { + mmc1_pins_ddr50: mmc1-ddr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -96,7 +96,7 @@ >; }; - mmc1_pins_sdr104: mmc1_pins_sdr104 { + mmc1_pins_sdr104: mmc1-sdr104-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -107,7 +107,7 @@ >; }; - mmc2_pins_default: mmc2_pins_default { + mmc2_pins_default: mmc2-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -122,7 +122,7 @@ >; }; - mmc2_pins_hs: mmc2_pins_hs { + mmc2_pins_hs: mmc2-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -137,7 +137,7 @@ >; }; - mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 { + mmc2_pins_ddr_3_3v_rev11: mmc2-ddr-3-3v-rev11-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -152,7 +152,7 @@ >; }; - mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 { + mmc2_pins_ddr_1_8v_rev11: mmc2-ddr-1-8v-rev11-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -167,7 +167,7 @@ >; }; - mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -182,7 +182,7 @@ >; }; - mmc2_pins_hs200: mmc2_pins_hs200 { + mmc2_pins_hs200: mmc2-hs200-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -197,7 +197,7 @@ >; }; - mmc4_pins_default: mmc4_pins_default { + mmc4_pins_default: mmc4-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ @@ -208,7 +208,7 @@ >; }; - mmc4_pins_hs: mmc4_pins_hs { + mmc4_pins_hs: mmc4-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ @@ -219,7 +219,7 @@ >; }; - mmc3_pins_default: mmc3_pins_default { + mmc3_pins_default: mmc3-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -230,7 +230,7 @@ >; }; - mmc3_pins_hs: mmc3_pins_hs { + mmc3_pins_hs: mmc3-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -241,7 +241,7 @@ >; }; - mmc3_pins_sdr12: mmc3_pins_sdr12 { + mmc3_pins_sdr12: mmc3-sdr12-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -252,7 +252,7 @@ >; }; - mmc3_pins_sdr25: mmc3_pins_sdr25 { + mmc3_pins_sdr25: mmc3-sdr25-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -263,7 +263,7 @@ >; }; - mmc3_pins_sdr50: mmc3_pins_sdr50 { + mmc3_pins_sdr50: mmc3-sdr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -274,7 +274,7 @@ >; }; - mmc4_pins_sdr12: mmc4_pins_sdr12 { + mmc4_pins_sdr12: mmc4-sdr12-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ @@ -285,7 +285,7 @@ >; }; - mmc4_pins_sdr25: mmc4_pins_sdr25 { + mmc4_pins_sdr25: mmc4-sdr25-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi index fdca48186916..4690554dfa6e 100644 --- a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi @@ -27,7 +27,7 @@ */ &dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { + mmc1_pins_default: mmc1-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -38,7 +38,7 @@ >; }; - mmc1_pins_hs: mmc1_pins_hs { + mmc1_pins_hs: mmc1-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -49,7 +49,7 @@ >; }; - mmc1_pins_sdr50: mmc1_pins_sdr50 { + mmc1_pins_sdr50: mmc1-sdr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -60,7 +60,7 @@ >; }; - mmc1_pins_ddr50: mmc1_pins_ddr50 { + mmc1_pins_ddr50: mmc1-ddr50-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ @@ -71,7 +71,7 @@ >; }; - mmc2_pins_default: mmc2_pins_default { + mmc2_pins_default: mmc2-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -86,7 +86,7 @@ >; }; - mmc2_pins_hs200: mmc2_pins_hs200 { + mmc2_pins_hs200: mmc2-hs200-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ @@ -101,7 +101,7 @@ >; }; - mmc3_pins_default: mmc3_pins_default { + mmc3_pins_default: mmc3-default-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ @@ -112,7 +112,7 @@ >; }; - mmc4_pins_hs: mmc4_pins_hs { + mmc4_pins_hs: mmc4-hs-pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi index 7f839331a777..b523a868c4ad 100644 --- a/arch/arm/boot/dts/en7523.dtsi +++ b/arch/arm/boot/dts/en7523.dtsi @@ -81,6 +81,8 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index 011ba2eff29e..07828551d4b3 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -5,8 +5,8 @@ * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. + * Samsung's Exynos3250 SoCs pin-mux and pin-config options are listed as device + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index bd37f1b587f0..3f1015edab43 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -6,7 +6,7 @@ * http://www.samsung.com * * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 8dd6976ab0a7..f775b9377a38 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -9,7 +9,7 @@ * * Samsung's Exynos4 SoC series device nodes are listed in this file. Particular * SoCs from Exynos4 series can include this file and provide values for SoCs - * specfic bindings. + * specific bindings. * * Note: This file does not include device nodes for all the controllers in * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional @@ -201,8 +201,8 @@ #size-cells = <0>; }; - camera: camera { - compatible = "samsung,fimc", "simple-bus"; + camera: camera@11800000 { + compatible = "samsung,fimc"; status = "disabled"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 76f44ae0de46..70d268f9fcb1 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -7,8 +7,8 @@ * Copyright (c) 2011-2012 Linaro Ltd. * www.linaro.org * - * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. + * Samsung's Exynos4210 SoC pin-mux and pin-config options are listed as device + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index ff6ee4b2c31b..bfb04b31e11b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -150,8 +150,6 @@ }; &camera { - pinctrl-names = "default"; - pinctrl-0 = <>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 8fe0d5d2be2d..c84af3d27c1c 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -197,9 +197,6 @@ &camera { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <>; }; &cpu0 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi new file mode 100644 index 000000000000..aa984601ee06 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4212 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 + * based board files can include this file and provide values for board specific + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional + * nodes can be added to this file. + */ + +#include "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4212", "samsung,exynos4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@a00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa00>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@a01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa01>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + cpu0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + clock-latency-ns = <200000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <200000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + opp-suspend; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <200000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1087500>; + clock-latency-ns = <200000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <200000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1187500>; + clock-latency-ns = <200000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <200000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1287500>; + clock-latency-ns = <200000>; + }; + cpu0_opp_1500: opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + turbo-mode; + }; + }; +}; + +&clock { + compatible = "samsung,exynos4212-clock"; +}; + +&combiner { + samsung,combiner-nr = <18>; +}; + +&gic { + cpu-offset = <0x8000>; +}; + +&pmu { + interrupts = <2 2>, <3 2>; + interrupt-affinity = <&cpu0>, <&cpu1>; + status = "okay"; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4212-pmu", "simple-mfd", "syscon"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 45ef7b7ba7e0..93ddbd4b0a18 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -122,8 +122,6 @@ &camera { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; }; &clock { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 82a36fb5ee8b..dcbe0ce6180f 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -6,7 +6,7 @@ * http://www.samsung.com * * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -14,150 +14,11 @@ * nodes can be added to this file. */ -#include "exynos4.dtsi" - -#include "exynos4-cpu-thermal.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412", "samsung,exynos4"; - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - pinctrl3 = &pinctrl_3; - fimc-lite0 = &fimc_lite_0; - fimc-lite1 = &fimc_lite_1; - }; - - bus_acp: bus-acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - - bus_acp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - }; - - bus_c2c: bus-c2c { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_C2C>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc: bus-dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - samsung,data-clock-ratio = <4>; - #interconnect-cells = <0>; - status = "disabled"; - }; - - bus_display: bus-display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - interconnects = <&bus_leftbus &bus_dmc>; - #interconnect-cells = <0>; - status = "disabled"; - - bus_display_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - }; - - bus_fsys: bus-fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - - bus_fsys_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - }; - }; - - bus_leftbus: bus-leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - interconnects = <&bus_dmc>; - #interconnect-cells = <0>; - status = "disabled"; - }; - - bus_mfc: bus-mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_peri: bus-peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - - bus_peri_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; - }; - - bus_rightbus: bus-rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -297,499 +158,20 @@ turbo-mode; }; }; +}; - bus_dmc_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <900000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <950000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1050000>; - opp-suspend; - }; - }; - - bus_leftbus_opp_table: opp-table-2 { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <950000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - opp-suspend; - }; - }; - - soc: soc { - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - pinctrl_2: pinctrl@3860000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; - }; - - pinctrl_3: pinctrl@106e0000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106e0000 0x1000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - }; - - sram@2020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x40000>; - - smp-sram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; - }; - }; - - pd_isp: power-domain@10023ca0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023ca0 0x20>; - #power-domain-cells = <0>; - label = "ISP"; - }; - - l2c: cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - prefetch-data = <1>; - prefetch-instr = <1>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - isp_clock: clock-controller@10048000 { - compatible = "samsung,exynos4412-isp-clock"; - reg = <0x10048000 0x1000>; - #clock-cells = <1>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_ACLK200>, - <&clock CLK_ACLK400_MCUISP>; - clock-names = "aclk200", "aclk400_mcuisp"; - }; - - timer@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <&combiner 12 5>, - <&combiner 12 6>, - <&combiner 12 7>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; - }; - - watchdog: watchdog@10060000 { - compatible = "samsung,exynos5250-wdt"; - reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - adc: adc@126c0000 { - compatible = "samsung,exynos4212-adc"; - reg = <0x126c0000 0x100>; - interrupt-parent = <&combiner>; - interrupts = <10 3>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - g2d: g2d@10800000 { - compatible = "samsung,exynos4212-g2d"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - - mshc_0: mmc@12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysmmu_g2d: sysmmu@10a40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10a40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_isp: sysmmu@12260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 2>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_ISP>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_drc: sysmmu@12270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 3>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_DRC>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_fd: sysmmu@122a0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122a0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 4>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_FD>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_mcuctl: sysmmu@122b0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122b0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 5>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite0: sysmmu@123b0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123b0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&isp_clock CLK_ISP_SMMU_LITE0>, - <&isp_clock CLK_ISP_FIMC_LITE0>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite1: sysmmu@123c0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123c0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 1>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&isp_clock CLK_ISP_SMMU_LITE1>, - <&isp_clock CLK_ISP_FIMC_LITE1>; - #iommu-cells = <0>; - }; - }; +&clock { + compatible = "samsung,exynos4412-clock"; }; &combiner { samsung,combiner-nr = <20>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; -}; - -&camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - - /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite0>; - status = "disabled"; - }; - - fimc_lite_1: fimc-lite@123a0000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123a0000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite1>; - status = "disabled"; - }; - - fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, - <&isp_clock CLK_ISP_FIMC_LITE1>, - <&isp_clock CLK_ISP_PPMUISPX>, - <&isp_clock CLK_ISP_PPMUISPMX>, - <&isp_clock CLK_ISP_FIMC_ISP>, - <&isp_clock CLK_ISP_FIMC_DRC>, - <&isp_clock CLK_ISP_FIMC_FD>, - <&isp_clock CLK_ISP_MCUISP>, - <&isp_clock CLK_ISP_GICISP>, - <&isp_clock CLK_ISP_MCUCTL_ISP>, - <&isp_clock CLK_ISP_PWM_ISP>, - <&isp_clock CLK_ISP_DIV_ISP0>, - <&isp_clock CLK_ISP_DIV_ISP1>, - <&isp_clock CLK_ISP_DIV_MCUISP0>, - <&isp_clock CLK_ISP_DIV_MCUISP1>, - <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_ACLK200>, - <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK200>, - <&clock CLK_DIV_ACLK400_MCUISP>, - <&clock CLK_UART_ISP_SCLK>; - clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "isp", - "drc", "fd", "mcuisp", - "gicisp", "mcuctl_isp", "pwm_isp", - "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "mpll", "aclk200", - "aclk400mcuisp", "div_aclk200", - "div_aclk400mcuisp", "uart"; - iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, - <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; - iommu-names = "isp", "drc", "fd", "mcuctl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c1_isp: i2c-isp@12140000 { - compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; - clocks = <&isp_clock CLK_ISP_I2C1_ISP>; - clock-names = "i2c_isp"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&exynos_usbphy { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; -}; - -&fimc_0 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_1 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_2 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; -}; - -&fimc_3 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; }; &gic { cpu-offset = <0x4000>; }; -&gpu { - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", - "gpmmu", - "pp0", - "ppmmu0", - "pp1", - "ppmmu1", - "pp2", - "ppmmu2", - "pp3", - "ppmmu3", - "pmu"; - operating-points-v2 = <&gpu_opp_table>; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <875000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <900000>; - }; - opp-350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <950000>; - }; - opp-440000000 { - opp-hz = /bits/ 64 <440000000>; - opp-microvolt = <1025000>; - }; - }; -}; - -&hdmi { - compatible = "samsung,exynos4212-hdmi"; -}; - -&jpeg_codec { - compatible = "samsung,exynos4212-jpeg"; -}; - -&rotator { - compatible = "samsung,exynos4212-rotator"; -}; - -&mixer { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; - interconnects = <&bus_display &bus_dmc>; -}; - &pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; @@ -798,22 +180,4 @@ &pmu_system_controller { compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; - #clock-cells = <1>; }; - -&tmu { - compatible = "samsung,exynos4412-tmu"; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100c0000 0x100>; - clocks = <&clock CLK_TMU_APBIF>; - clock-names = "tmu_apbif"; - status = "disabled"; -}; - -#include "exynos4412-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 8ab31c3daa48..04935fbe2f2a 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. + * Samsung's Exynos4x12 SoCs pin-mux and pin-config options are listed as device + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi new file mode 100644 index 000000000000..84c1db221c98 --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -0,0 +1,664 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoC series device nodes are listed in this file. + * Particular SoCs from Exynos4x12 series can include this file and provide + * values for SoCs specific bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoCs. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + */ + +#include "exynos4.dtsi" + +#include "exynos4-cpu-thermal.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; + }; + + bus_acp: bus-acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; + + bus_acp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + }; + + bus_c2c: bus-c2c { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_C2C>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc: bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; + status = "disabled"; + }; + + bus_display: bus-display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&bus_leftbus &bus_dmc>; + #interconnect-cells = <0>; + status = "disabled"; + + bus_display_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + }; + + bus_fsys: bus-fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; + + bus_fsys_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + }; + }; + + bus_leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&bus_dmc>; + #interconnect-cells = <0>; + status = "disabled"; + }; + + bus_mfc: bus-mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_peri: bus-peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; + + bus_peri_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + }; + + bus_rightbus: bus-rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <900000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <900000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + opp-suspend; + }; + }; + + bus_leftbus_opp_table: opp-table-2 { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <925000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + opp-suspend; + }; + }; + + soc: soc { + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pinctrl_2: pinctrl@3860000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106e0000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106e0000 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + + sram@2020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + + pd_isp: power-domain@10023ca0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023ca0 0x20>; + #power-domain-cells = <0>; + label = "ISP"; + }; + + l2c: cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; + + clock: clock-controller@10030000 { + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; + + timer@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 5>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + watchdog: watchdog@10060000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; + + adc: adc@126c0000 { + compatible = "samsung,exynos4212-adc"; + reg = <0x126c0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <10 3>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + g2d: g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + sysmmu_g2d: sysmmu@10a40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10a40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@122a0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122a0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122b0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122b0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@123b0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123b0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&isp_clock CLK_ISP_SMMU_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123c0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123c0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&isp_clock CLK_ISP_SMMU_LITE1>, + <&isp_clock CLK_ISP_FIMC_LITE1>; + #iommu-cells = <0>; + }; + }; +}; + +&combiner { + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + /* fimc_[0-3] are configured outside, under phandles */ + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123a0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123a0000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; +}; + +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&rotator { + compatible = "samsung,exynos4212-rotator"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + interconnects = <&bus_display &bus_dmc>; +}; + +&pmu_system_controller { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100c0000 0x100>; + clocks = <&clock CLK_TMU_APBIF>; + clock-names = "tmu_apbif"; + status = "disabled"; +}; + +#include "exynos4x12-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 48e43b6b3213..4a17a19586bb 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -7,7 +7,7 @@ * * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular * SoCs from Exynos5 series can include this file and provide values for SoCs - * specfic bindings. + * specific bindings. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 48732edadff1..d956540a2d88 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -5,8 +5,8 @@ * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. + * Samsung's Exynos5250 SoC pin-mux and pin-config options are listed as device + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 1a4c6c028d03..99c84bebf25a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -7,7 +7,7 @@ * * Samsung Exynos5250 SoC device nodes are listed in this file. * Exynos5250 based board files can include this file and provide - * values for board specfic bindings. + * values for board specific bindings. * * Note: This file does not include device nodes for all the controllers in * Exynos5250 SoC. As device tree coverage for Exynos5250 increases, diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi index 43e4a541f479..d15494b4bda9 100644 --- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -6,7 +6,7 @@ * http://www.samsung.com * * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device - * tree nodes are listed in this file. + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 350b8afa0a3a..546035e78f40 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -7,7 +7,7 @@ * * Samsung Exynos5410 SoC device nodes are listed in this file. * Exynos5410 based board files can include this file and provide - * values for board specfic bindings. + * values for board specific bindings. */ #include "exynos54xx.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 14cf9c4ca0ed..93b9873fa84f 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -6,7 +6,7 @@ * http://www.samsung.com * * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device - * tree nodes are listed in this file. + * tree nodes in this file. */ #include "exynos-pinctrl.h" diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index dd291f1199f2..25ed90374679 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -7,7 +7,7 @@ * * Samsung Exynos5420 SoC device nodes are listed in this file. * Exynos5420 based board files can include this file and provide - * values for board specfic bindings. + * values for board specific bindings. */ #include "exynos54xx.dtsi" diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 8328ddb3b02f..72d3a3535a7a 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -7,7 +7,7 @@ * * Samsung Exynos5800 SoC device nodes are listed in this file. * Exynos5800 based board files can include this file and provide - * values for board specfic bindings. + * values for board specific bindings. */ #include "exynos5420.dtsi" diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index d7f5daecc9dc..f1c816a1d7cf 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -66,119 +66,119 @@ pinctrl-names = "default"; pinctrl-0 = <&board_pmx_pins>; - board_pmx_pins: board_pmx_pins { + board_pmx_pins: board-pins { pinctrl-single,pins = < 0x008 0x0 /* GPIO -- eFUSE_DOUT */ 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ >; }; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0x0f0 0x0 0x0f4 0x0 /* UART0_RX & UART0_TX */ >; }; - uart0_pmx_idle: uart0_pmx_idle { + uart0_pmx_idle: uart0-idle-pins { pinctrl-single,pins = < /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ 0x0f4 0x1 /* UART0_RX & UART0_TX */ >; }; - uart1_pmx_func: uart1_pmx_func { + uart1_pmx_func: uart1-pins { pinctrl-single,pins = < 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ >; }; - uart1_pmx_idle: uart1_pmx_idle { + uart1_pmx_idle: uart1-idle-pins { pinctrl-single,pins = < 0x0f8 0x1 /* GPIO (IOMG61) */ 0x0fc 0x1 /* GPIO (IOMG62) */ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0x104 0x2 /* UART2_RXD (IOMG96) */ 0x108 0x2 /* UART2_TXD (IOMG64) */ >; }; - uart2_pmx_idle: uart2_pmx_idle { + uart2_pmx_idle: uart2-idle-pins { pinctrl-single,pins = < 0x104 0x1 /* GPIO (IOMG96) */ 0x108 0x1 /* GPIO (IOMG64) */ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ >; }; - uart3_pmx_idle: uart3_pmx_idle { + uart3_pmx_idle: uart3-idle-pins { pinctrl-single,pins = < 0x160 0x1 /* GPIO (IOMG85) */ 0x164 0x1 /* GPIO (IOMG86) */ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ 0x16c 0x0 /* UART4_RXD (IOMG88) */ 0x170 0x0 /* UART4_TXD (IOMG93) */ >; }; - uart4_pmx_idle: uart4_pmx_idle { + uart4_pmx_idle: uart4-idle-pins { pinctrl-single,pins = < 0x168 0x1 /* GPIO (IOMG87) */ 0x16c 0x1 /* GPIO (IOMG88) */ 0x170 0x1 /* GPIO (IOMG93) */ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ >; }; - i2c0_pmx_idle: i2c0_pmx_idle { + i2c0_pmx_idle: i2c0-idle-pins { pinctrl-single,pins = < 0x0b4 0x1 /* GPIO (IOMG45) */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ >; }; - i2c1_pmx_idle: i2c1_pmx_idle { + i2c1_pmx_idle: i2c1-idle-pins { pinctrl-single,pins = < 0x0b8 0x1 /* GPIO (IOMG46) */ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c2_pmx_func: i2c2-pins { pinctrl-single,pins = < 0x068 0x0 /* I2C2_SCL (IOMG26) */ 0x06c 0x0 /* I2C2_SDA (IOMG27) */ >; }; - i2c2_pmx_idle: i2c2_pmx_idle { + i2c2_pmx_idle: i2c2-idle-pins { pinctrl-single,pins = < 0x068 0x1 /* GPIO (IOMG26) */ 0x06c 0x1 /* GPIO (IOMG27) */ >; }; - i2c3_pmx_func: i2c3_pmx_func { + i2c3_pmx_func: i2c3-pins { pinctrl-single,pins = < 0x050 0x2 /* I2C3_SCL (IOMG20) */ 0x054 0x2 /* I2C3_SDA (IOMG21) */ >; }; - i2c3_pmx_idle: i2c3_pmx_idle { + i2c3_pmx_idle: i2c3-idle-pins { pinctrl-single,pins = < 0x050 0x1 /* GPIO (IOMG20) */ 0x054 0x1 /* GPIO (IOMG21) */ >; }; - spi0_pmx_func: spi0_pmx_func { + spi0_pmx_func: spi0-pins { pinctrl-single,pins = < 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ @@ -187,7 +187,7 @@ 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ >; }; - spi0_pmx_idle: spi0_pmx_idle { + spi0_pmx_idle: spi0-idle-pins { pinctrl-single,pins = < 0x0d4 0x1 /* GPIO (IOMG53) */ 0x0d8 0x1 /* GPIO (IOMG54) */ @@ -196,21 +196,21 @@ 0x0e4 0x1 /* GPIO (IOMG57) */ >; }; - spi1_pmx_func: spi1_pmx_func { + spi1_pmx_func: spi1-pins { pinctrl-single,pins = < 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ 0x0e8 0x0 /* SPI1_DO (IOMG58) */ 0x0ec 0x0 /* SPI1_CS (IOMG95) */ >; }; - spi1_pmx_idle: spi1_pmx_idle { + spi1_pmx_idle: spi1-idle-pins { pinctrl-single,pins = < 0x184 0x1 /* GPIO (IOMG98) */ 0x0e8 0x1 /* GPIO (IOMG58) */ 0x0ec 0x1 /* GPIO (IOMG95) */ >; }; - kpc_pmx_func: kpc_pmx_func { + kpc_pmx_func: kpc-pins { pinctrl-single,pins = < 0x12c 0x0 /* KEY_IN0 (IOMG73) */ 0x130 0x0 /* KEY_IN1 (IOMG74) */ @@ -220,7 +220,7 @@ 0x114 0x0 /* KEY_OUT2 (IOMG67) */ >; }; - kpc_pmx_idle: kpc_pmx_idle { + kpc_pmx_idle: kpc-idle-pins { pinctrl-single,pins = < 0x12c 0x1 /* GPIO (IOMG73) */ 0x130 0x1 /* GPIO (IOMG74) */ @@ -230,13 +230,13 @@ 0x114 0x1 /* GPIO (IOMG67) */ >; }; - gpio_key_func: gpio_key_func { + gpio_key_func: gpio-key-pins { pinctrl-single,pins = < 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ >; }; - emmc_pmx_func: emmc_pmx_func { + emmc_pmx_func: emmc-pins { pinctrl-single,pins = < 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ 0x018 0x0 /* NAND_CS3_N (IOMG6) */ @@ -245,7 +245,7 @@ 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ >; }; - emmc_pmx_idle: emmc_pmx_idle { + emmc_pmx_idle: emmc-idle-pins { pinctrl-single,pins = < 0x030 0x0 /* GPIO (IOMG12) */ 0x018 0x1 /* GPIO (IOMG6) */ @@ -254,19 +254,19 @@ 0x02c 0x1 /* GPIO (IOMG10) */ >; }; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ >; }; - sd_pmx_idle: sd_pmx_idle { + sd_pmx_idle: sd-idle-pins { pinctrl-single,pins = < 0x0bc 0x1 /* GPIO (IOMG47) */ 0x0c0 0x1 /* GPIO (IOMG48) */ >; }; - nand_pmx_func: nand_pmx_func { + nand_pmx_func: nand-pins { pinctrl-single,pins = < 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ 0x010 0x0 /* NAND_CS1_N (IOMG4) */ @@ -279,7 +279,7 @@ 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ >; }; - nand_pmx_idle: nand_pmx_idle { + nand_pmx_idle: nand-idle-pins { pinctrl-single,pins = < 0x00c 0x1 /* GPIO (IOMG3) */ 0x010 0x1 /* GPIO (IOMG4) */ @@ -292,17 +292,17 @@ 0x02c 0x1 /* GPIO (IOMG10) */ >; }; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ >; }; - sdio_pmx_idle: sdio_pmx_idle { + sdio_pmx_idle: sdio-idle-pins { pinctrl-single,pins = < 0x0c4 0x1 /* GPIO (IOMG49) */ >; }; - audio_out_pmx_func: audio_out_pmx_func { + audio_out_pmx_func: audio-out-pins { pinctrl-single,pins = < 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ >; @@ -314,7 +314,7 @@ pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins &board_np_pins &board_ps_pins &kpc_cfg_func &audio_out_cfg_func>; - board_pu_pins: board_pu_pins { + board_pu_pins: board-pu-pins { pinctrl-single,pins = < 0x014 0 /* GPIO_158 (IOCFG2) */ 0x018 0 /* GPIO_159 (IOCFG3) */ @@ -324,7 +324,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <1 1 0 1>; }; - board_pd_pins: board_pd_pins { + board_pd_pins: board-pd-pins { pinctrl-single,pins = < 0x038 0 /* eFUSE_DOUT (IOCFG11) */ 0x150 0 /* ISP_GPIO8 (IOCFG93) */ @@ -333,7 +333,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - board_pd_ps_pins: board_pd_ps_pins { + board_pd_ps_pins: board-pd-ps-pins { pinctrl-single,pins = < 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ @@ -342,21 +342,21 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - board_np_pins: board_np_pins { + board_np_pins: board-np-pins { pinctrl-single,pins = < 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ >; pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - board_ps_pins: board_ps_pins { + board_ps_pins: board-ps-pins { pinctrl-single,pins = < 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ >; pinctrl-single,drive-strength = <0x30 0xf0>; }; - uart0_cfg_func: uart0_cfg_func { + uart0_cfg_func: uart0-cfg-pins { pinctrl-single,pins = < 0x208 0 /* UART0_RXD (IOCFG138) */ 0x20c 0 /* UART0_TXD (IOCFG139) */ @@ -364,7 +364,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart0_cfg_idle: uart0_cfg_idle { + uart0_cfg_idle: uart0-cfg-idle-pins { pinctrl-single,pins = < 0x208 0 /* UART0_RXD (IOCFG138) */ 0x20c 0 /* UART0_TXD (IOCFG139) */ @@ -372,7 +372,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart1_cfg_func: uart1_cfg_func { + uart1_cfg_func: uart1-cfg-pins { pinctrl-single,pins = < 0x210 0 /* UART1_CTS (IOCFG140) */ 0x214 0 /* UART1_RTS (IOCFG141) */ @@ -382,7 +382,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart1_cfg_idle: uart1_cfg_idle { + uart1_cfg_idle: uart1-cfg-idle-pins { pinctrl-single,pins = < 0x210 0 /* UART1_CTS (IOCFG140) */ 0x214 0 /* UART1_RTS (IOCFG141) */ @@ -392,7 +392,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0x220 0 /* UART2_CTS (IOCFG144) */ 0x224 0 /* UART2_RTS (IOCFG145) */ @@ -402,7 +402,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart2_cfg_idle: uart2_cfg_idle { + uart2_cfg_idle: uart2-cfg-idle-pins { pinctrl-single,pins = < 0x220 0 /* GPIO (IOCFG144) */ 0x224 0 /* GPIO (IOCFG145) */ @@ -412,7 +412,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x294 0 /* UART3_CTS (IOCFG173) */ 0x298 0 /* UART3_RTS (IOCFG174) */ @@ -422,7 +422,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart3_cfg_idle: uart3_cfg_idle { + uart3_cfg_idle: uart3-cfg-idle-pins { pinctrl-single,pins = < 0x294 0 /* UART3_CTS (IOCFG173) */ 0x298 0 /* UART3_RTS (IOCFG174) */ @@ -432,7 +432,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x2a4 0 /* UART4_CTS (IOCFG177) */ 0x2a8 0 /* UART4_RTS (IOCFG178) */ @@ -442,7 +442,7 @@ pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0x17c 0 /* I2C0_SCL (IOCFG103) */ 0x180 0 /* I2C0_SDA (IOCFG104) */ @@ -451,7 +451,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0x184 0 /* I2C1_SCL (IOCFG105) */ 0x188 0 /* I2C1_SDA (IOCFG106) */ @@ -460,7 +460,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - i2c2_cfg_func: i2c2_cfg_func { + i2c2_cfg_func: i2c2-cfg-pins { pinctrl-single,pins = < 0x118 0 /* I2C2_SCL (IOCFG79) */ 0x11c 0 /* I2C2_SDA (IOCFG80) */ @@ -469,7 +469,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - i2c3_cfg_func: i2c3_cfg_func { + i2c3_cfg_func: i2c3-cfg-pins { pinctrl-single,pins = < 0x100 0 /* I2C3_SCL (IOCFG73) */ 0x104 0 /* I2C3_SDA (IOCFG74) */ @@ -478,7 +478,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - spi0_cfg_func1: spi0_cfg_func1 { + spi0_cfg_func1: spi0-cfg-func1-pins { pinctrl-single,pins = < 0x1d4 0 /* SPI0_CLK (IOCFG125) */ 0x1d8 0 /* SPI0_DI (IOCFG126) */ @@ -488,7 +488,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - spi0_cfg_func2: spi0_cfg_func2 { + spi0_cfg_func2: spi0-cfg-func2-pins { pinctrl-single,pins = < 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ @@ -499,7 +499,7 @@ pinctrl-single,bias-pullup = <1 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - spi1_cfg_func1: spi1_cfg_func1 { + spi1_cfg_func1: spi1-cfg-func1-pins { pinctrl-single,pins = < 0x1f0 0 /* SPI1_CLK (IOCFG132) */ 0x1f4 0 /* SPI1_DI (IOCFG133) */ @@ -509,7 +509,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - spi1_cfg_func2: spi1_cfg_func2 { + spi1_cfg_func2: spi1-cfg-func2-pins { pinctrl-single,pins = < 0x1fc 0 /* SPI1_CS (IOCFG135) */ >; @@ -517,7 +517,7 @@ pinctrl-single,bias-pullup = <1 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - kpc_cfg_func: kpc_cfg_func { + kpc_cfg_func: kpc-cfg-pins { pinctrl-single,pins = < 0x250 0 /* KEY_IN0 (IOCFG156) */ 0x254 0 /* KEY_IN1 (IOCFG157) */ @@ -529,7 +529,7 @@ pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; }; - emmc_cfg_func: emmc_cfg_func { + emmc_cfg_func: emmc-cfg-pins { pinctrl-single,pins = < 0x0ac 0 /* eMMC_CMD (IOCFG40) */ 0x0b0 0 /* eMMC_CLK (IOCFG41) */ @@ -549,7 +549,7 @@ pinctrl-single,bias-pullup = <1 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - sd_cfg_func1: sd_cfg_func1 { + sd_cfg_func1: sd-cfg-func1-pins { pinctrl-single,pins = < 0x18c 0 /* SD_CLK (IOCFG107) */ 0x190 0 /* SD_CMD (IOCFG108) */ @@ -558,7 +558,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - sd_cfg_func2: sd_cfg_func2 { + sd_cfg_func2: sd-cfg-func2-pins { pinctrl-single,pins = < 0x194 0 /* SD_DATA0 (IOCFG109) */ 0x198 0 /* SD_DATA1 (IOCFG110) */ @@ -569,7 +569,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x70 0xf0>; }; - nand_cfg_func1: nand_cfg_func1 { + nand_cfg_func1: nand-cfg-func1-pins { pinctrl-single,pins = < 0x03c 0 /* NAND_ALE (IOCFG12) */ 0x040 0 /* NAND_CLE (IOCFG13) */ @@ -594,7 +594,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - nand_cfg_func2: nand_cfg_func2 { + nand_cfg_func2: nand-cfg-func2-pins { pinctrl-single,pins = < 0x044 0 /* NAND_RE_N (IOCFG14) */ 0x048 0 /* NAND_WE_N (IOCFG15) */ @@ -611,7 +611,7 @@ pinctrl-single,bias-pullup = <1 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x1a4 0 /* SDIO0_CLK (IOCG113) */ 0x1a8 0 /* SDIO0_CMD (IOCG114) */ @@ -624,7 +624,7 @@ pinctrl-single,bias-pullup = <0 1 0 1>; pinctrl-single,drive-strength = <0x30 0xf0>; }; - audio_out_cfg_func: audio_out_cfg_func { + audio_out_cfg_func: audio-out-cfg-pins { pinctrl-single,pins = < 0x200 0 /* GPIO (IOCFG136) */ 0x204 0 /* GPIO (IOCFG137) */ diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index cf48ec14af43..a254ec009296 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -545,10 +545,9 @@ compatible = "pinctrl-single"; reg = <0x803000 0x188>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; #gpio-range-cells = <3>; - ranges; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <7>; @@ -567,9 +566,8 @@ compatible = "pinconf-single"; reg = <0x803800 0x2dc>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; - ranges; pinctrl-single,register-width = <32>; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index d19508c8f9ed..a3668a0827fc 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -59,7 +59,7 @@ reg = <0x80000000 0x2000>; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <0 14 20 0 diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 94d6614c1983..c5a7f56d83db 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -100,9 +100,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10049>; status = "okay"; - gpio-sck = <&gpio2 16 0>; - gpio-mosi = <&gpio2 17 0>; - gpio-miso = <&gpio2 18 0>; + sck-gpios = <&gpio2 16 0>; + mosi-gpios = <&gpio2 17 0>; + miso-gpios = <&gpio2 18 0>; cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; @@ -124,8 +124,8 @@ pinctrl-names = "default"; pinctrl-0 = <&spi3_pins_cfa10049>; status = "okay"; - gpio-sck = <&gpio0 24 0>; - gpio-mosi = <&gpio0 28 0>; + sck-gpios = <&gpio0 24 0>; + mosi-gpios = <&gpio0 28 0>; cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>; num-chipselects = <3>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 42ba7da48beb..70e225a99fbe 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -19,9 +19,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10055>; status = "okay"; - gpio-sck = <&gpio2 16 0>; - gpio-mosi = <&gpio2 17 0>; - gpio-miso = <&gpio2 18 0>; + sck-gpios = <&gpio2 16 0>; + mosi-gpios = <&gpio2 17 0>; + miso-gpios = <&gpio2 18 0>; cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index 0e15bdfd7281..bc2d6fcad12f 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -18,9 +18,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10056>; status = "okay"; - gpio-sck = <&gpio2 16 0>; - gpio-mosi = <&gpio2 17 0>; - gpio-miso = <&gpio2 18 0>; + sck-gpios = <&gpio2 16 0>; + mosi-gpios = <&gpio2 17 0>; + miso-gpios = <&gpio2 18 0>; cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index ffe58c7093e1..23ad7cd0a1de 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -192,9 +192,9 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_spi_gpio_pins>; - gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; num-chipselects = <3>; cs-gpios = < &gpio2 27 GPIO_ACTIVE_LOW diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a8d3c3113e0f..29e37b1fae66 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -78,7 +78,7 @@ status = "disabled"; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <82 83 84 85 diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index d650f54c3fc6..2d20e5541acc 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -298,7 +298,6 @@ compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 74>; - clock-names = ""; interrupts = <55>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index e537e06e11d7..5d4b29d76585 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -145,9 +145,9 @@ pinctrl-0 = <&pinctrl_gpiospi0>; status = "okay"; - gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; @@ -181,7 +181,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rev-mii"; ethernet = <&fec>; fixed-link { diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts index 21dd3f7abd48..625f9ac671ae 100644 --- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -82,7 +82,7 @@ port@4 { reg = <4>; - label = "cpu"; + phy-mode = "rev-mii"; ethernet = <&fec>; fixed-link { diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts index 9f857eb44bf7..19a3b142c964 100644 --- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -267,7 +267,6 @@ port@6 { reg = <6>; - label = "cpu"; phy-mode = "mii"; ethernet = <&fec>; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 7e7f9f3b3906..d930739674a1 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -274,7 +274,7 @@ reg = <0x48>; }; - eeprom: 24c64@50 { + eeprom: eeprom@50 { compatible = "atmel,24c64"; pagesize = <32>; reg = <0x50>; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e6a4e2770640..4989e8d069a1 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -361,6 +361,7 @@ pinctrl-0 = <&pinctrl_usbh1>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; @@ -370,9 +371,18 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts index fa823988312d..7c62db91173b 100644 --- a/arch/arm/boot/dts/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -257,9 +257,18 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index e98046eea7a4..84f34da06267 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -235,7 +235,7 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; - disable-over-current; + over-current-active-low; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index e3c10483f33b..dfa8110b1d97 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -113,18 +113,42 @@ polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&tsens0>; + + trips { + alert { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal0 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; + + trips { + alert { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal1 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; + + trips { + alert { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index 5f4fa796ca18..773a84a5739d 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -560,6 +560,7 @@ pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; + disable-over-current; status = "okay"; }; @@ -569,10 +570,18 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; - disable-over-current; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts index 56bb1ca56a2d..36b031236e47 100644 --- a/arch/arm/boot/dts/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -124,6 +124,10 @@ status = "disabled"; }; +&usbotg { + disable-over-current; +}; + &vpu { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index a1eb53851794..568e98cb62aa 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -24,7 +24,7 @@ compatible = "pwm-backlight"; pwms = <&pwm1 0 500000 0>; brightness-levels = <0 20 81 248 1000>; - default-brightness-level = <20>; + default-brightness-level = <65>; num-interpolated-steps = <21>; power-supply = <®_bl_12v0>; }; @@ -246,18 +246,42 @@ polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&tsens0>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal0 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal1 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; }; @@ -267,8 +291,6 @@ <&adc_ts 5>; io-channel-names = "y", "z1", "z2", "x"; touchscreen-min-pressure = <64687>; - touchscreen-inverted-x; - touchscreen-inverted-y; touchscreen-x-plate-ohms = <300>; touchscreen-y-plate-ohms = <800>; }; diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi index 150d69858255..05fd8ff4da1e 100644 --- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -60,7 +60,7 @@ >; }; - audmux_aud6 { + mux-aud6 { fsl,audmux-port = <MX51_AUDMUX_PORT6>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 24c7f535f63b..0366d1037ef4 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -177,7 +177,7 @@ VDDIO-supply = <®_3p3v>; }; - pmic: pf0100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 23274be08e61..4875afadb630 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -74,18 +74,42 @@ polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&tsens0>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal0 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; touch-thermal1 { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 1ad41c944b4b..ffb3b8eeae5d 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -141,7 +141,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_RCLKDIR | @@ -152,7 +152,7 @@ >; }; - audmux4 { + mux-audmux4 { fsl,audmux-port = <3>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index fef5d7254536..4ab31f2217cd 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -147,7 +147,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -159,7 +159,7 @@ >; }; - aud6 { + mux-aud6 { fsl,audmux-port = <5>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_RFSEL(8) | @@ -276,7 +276,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 9591848cbd37..3815cb660ff7 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -134,7 +134,7 @@ &pinctrl_pfuze>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio3>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 522a51042965..0ba802b891b5 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -206,7 +206,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 6406ade14f57..3fe4591e21f5 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -166,7 +166,7 @@ pinctrl-0 = <&pinctrl_h100_i2c1>; status = "okay"; - eeprom: 24c02@51 { + eeprom: eeprom@51 { compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi index 5e0ed5560040..091903f53a56 100644 --- a/arch/arm/boot/dts/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/imx6q-kp.dtsi @@ -135,7 +135,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -147,7 +147,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index ee8c0bd3ecfd..a7d5a68110fc 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -308,7 +308,7 @@ pinctrl-0 = <&pinctrl_i2c2_novena>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index bad8d831e64e..109b46a22b5e 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -208,7 +208,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index 54a57a4548e2..792b8903d345 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -156,9 +156,6 @@ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 /* nINTRP */ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 - - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4e20cb97058e..a642be45ffe2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -187,7 +187,7 @@ pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -199,7 +199,7 @@ >; }; - aud5 { + mux-aud5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -349,8 +349,6 @@ fan-controller@2c { compatible = "gw,gsc-fan"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x2c>; }; }; @@ -400,7 +398,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 0fa4b8eeddee..29960d1cf6a0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -171,7 +171,7 @@ pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */ status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -183,7 +183,7 @@ >; }; - aud5 { + mux-aud5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 9fc79af2bc9a..9594bc5745ed 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -238,8 +238,13 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 40e235e315cc..de5983cf7810 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -243,8 +243,6 @@ fan-controller@a { compatible = "gw,gsc-fan"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x0a>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 2ffb21dd89f2..bfade7149080 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -147,7 +147,7 @@ &audmux { status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -159,7 +159,7 @@ >; }; - pins5 { + mux-pins5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index eb1ad28946d3..0883ef99cded 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -179,7 +179,7 @@ &audmux { status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -191,7 +191,7 @@ >; }; - pins5 { + mux-pins5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index a4217f564a53..d339957cc097 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -118,7 +118,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -130,7 +130,7 @@ >; }; - audmux_aud4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -262,7 +262,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - vmcc-supply = <®_sd3_vmmc>; + vmmc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; bus-width = <4>; no-1-8-v; @@ -274,7 +274,7 @@ pinctrl-0 = <&pinctrl_usdhc4>; pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; - vmcc-supply = <®_sd4_vmmc>; + vmmc-supply = <®_sd4_vmmc>; bus-width = <8>; no-1-8-v; non-removable; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 23c318d9636f..efe11524b885 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -109,7 +109,7 @@ status = "okay"; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -121,7 +121,7 @@ >; }; - audmux_aud4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi index 78555a618851..212c623418fc 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -129,7 +129,7 @@ &audmux { status = "okay"; - ssi0 { + mux-ssi0 { fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -141,7 +141,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -192,6 +192,13 @@ }; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { tlv320aic32x4: audio-codec@18 { compatible = "ti,tlv320aic32x4"; @@ -205,6 +212,17 @@ }; }; +/* DDC */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_recovery>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -271,6 +289,22 @@ &usbh1 { disable-over-current; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,2517"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9e00"; + reg = <1>; + nvmem-cells = <&mba_mac_address>; + nvmem-cell-names = "mac-address"; + }; + }; }; &usbotg { @@ -395,6 +429,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + /* NOTE: DDC is done via I2C2, so DON'T + * configure DDC pins for HDMI! + */ + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099 @@ -431,6 +474,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c2_recovery: i2c2recoverygrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b899 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b899 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < /* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/ diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi index df8fa169e9f6..27fec340c380 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi @@ -21,6 +21,12 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; rtc0: rtc@68 { diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi index 7d1cd7454c7f..0a9f076eeb36 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi @@ -31,6 +31,12 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; rtc0: rtc@68 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 51d28e275aa6..a41e47c06ef4 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -75,7 +75,7 @@ &audmux { status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -87,7 +87,7 @@ >; }; - pins5 { + mux-pins5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi index f0db0d4471f4..36f84f4da6b0 100644 --- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi @@ -69,6 +69,7 @@ vbus-supply = <®_usb_h1_vbus>; phy_type = "utmi"; dr_mode = "host"; + disable-over-current; status = "okay"; }; @@ -78,10 +79,18 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; - disable-over-current; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index f79caa36f3d2..68e97180d33e 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -336,7 +336,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 53b080c97f2d..4fe58764b929 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -338,7 +338,7 @@ }; }; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a197bac95cba..e2fe337f7d9e 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -216,7 +216,7 @@ &audmux { status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -228,7 +228,7 @@ >; }; - pins5 { + mux-pins5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index c41cac502bac..200559d7158d 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -39,7 +39,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -51,7 +51,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi index f505f2704530..73f381e14467 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi @@ -10,7 +10,7 @@ pinctrl-0 = <&pinctrl_gpiokeys>; autorepeat; - power { + power-button { label = "Power Button"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index c4e6cf0527ba..96e4f4b0b248 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -169,6 +169,14 @@ polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&tsens0>; + + trips { + alert { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; }; }; }; @@ -393,8 +401,6 @@ }; &ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; status = "okay"; }; @@ -426,6 +432,7 @@ pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; + disable-over-current; status = "okay"; }; @@ -439,6 +446,14 @@ status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index bf86b639fdac..9b8c9c23ab54 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -27,7 +27,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5bb47c79a4da..9ff183e4e069 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -757,7 +757,7 @@ port@2 { reg = <2>; - label = "cpu"; + phy-mode = "rev-rmii"; ethernet = <&fec>; fixed-link { @@ -848,7 +848,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi1 { + mux-ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -860,7 +860,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -868,7 +868,7 @@ >; }; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -880,7 +880,7 @@ >; }; - aud5 { + mux-aud5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b72ec745f6d1..bda182edc589 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -150,7 +150,7 @@ interrupt-parent = <&gpc>; ranges; - dma_apbh: dma-apbh@110000 { + dma_apbh: dma-controller@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts index cf6571cc4682..ae00d538a4df 100644 --- a/arch/arm/boot/dts/imx6qp-prtwd3.dts +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts @@ -350,7 +350,7 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; - disable-over-current; + over-current-active-low; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index dc5d596c18db..239bc6dfc584 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 269092ac881c..e3e9b0ec4f73 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -109,6 +109,14 @@ enable-active-high; }; + reg_sd2_vmmc: regulator-sd2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "eMMC-VCCQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + reg_sd3_vmmc: regulator-sd3-vmmc { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -343,6 +351,17 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + vqmmc-supply = <®_sd2_vmmc>; + status = "okay"; +}; + &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; pinctrl-names = "default"; @@ -444,7 +463,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + pinctrl_usdhc1_100mhz: usdhc1grp-100mhz { fsl,pins = < MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 @@ -455,7 +474,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + pinctrl_usdhc1_200mhz: usdhc1grp-200mhz { fsl,pins = < MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 @@ -466,6 +485,54 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 + MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059 + MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059 + MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059 + MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059 + MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x13059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 + MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9 + MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9 + MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9 + MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9 + MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x130b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 + MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9 + MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9 + MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9 + MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9 + MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x130f9 + >; + }; + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 @@ -484,7 +551,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 @@ -496,7 +563,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { fsl,pins = < MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 7dda42553f4b..48f19dede467 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -15,7 +15,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 969cfe920d25..e05a1be5553c 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -14,7 +14,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze200"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index b9a1401e6c6d..bfcd8f7d86dd 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -171,7 +171,7 @@ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; }; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze200"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 93ac2380ca1e..3a4308666552 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -209,7 +209,7 @@ power-domains = <&pd_pu>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, @@ -841,10 +841,40 @@ reg = <0x020e0000 0x4000>; }; - gpr: iomuxc-gpr@20e4000 { + gpr: syscon@20e4000 { compatible = "fsl,imx6sx-iomuxc-gpr", - "fsl,imx6q-iomuxc-gpr", "syscon"; + "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x020e4000 0x4000>; + + lvds_bridge: bridge@18 { + compatible = "fsl,imx6sx-ldb"; + reg = <0x18 0x4>; + clocks = <&clks IMX6SX_CLK_LDB_DI0>; + clock-names = "ldb"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + }; + }; + }; + }; }; sdma: dma-controller@20ec000 { @@ -1278,6 +1308,14 @@ clock-names = "pix", "axi", "disp_axi"; power-domains = <&pd_disp>; status = "disabled"; + + ports { + port { + lcdif1_to_ldb: endpoint { + remote-endpoint = <&ldb_from_lcdif1>; + }; + }; + }; }; lcdif2: lcdif@2224000 { diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 7275a1366413..155515fe13fa 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -89,8 +89,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; status = "okay"; - gpio-sck = <&gpio5 11 0>; - gpio-mosi = <&gpio5 10 0>; + sck-gpios = <&gpio5 11 0>; + mosi-gpios = <&gpio5 10 0>; cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi index b5781c3656d1..7d1a391431bd 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -158,7 +158,7 @@ regulator-max-microvolt = <3300000>; }; - vcoin_chg: vcoin { + vcoin_chg: coin { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3300000>; }; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi index 357ffb2f5ad6..4ffe99ed55ca 100644 --- a/arch/arm/boot/dts/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -131,7 +131,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index b7c96fbe7a91..c3c50f51a5a8 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -177,6 +177,7 @@ &usbotg1 { dr_mode = "host"; + over-current-active-low; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 70cef5e817bd..6bd90473050b 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -218,9 +218,9 @@ compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi_gpio>; - gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; cs-gpios = < &gpio1 29 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 3d9d0f823568..0174f3edbd16 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -164,7 +164,7 @@ <0x00a06000 0x2000>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -719,6 +719,18 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; + clocks = <&clks IMX6UL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + }; }; iomuxc: pinctrl@20e0000 { diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi index 17837663c0b0..830b5a5064f2 100644 --- a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi @@ -7,8 +7,6 @@ / { aliases { - /delete-property/ mmc0; /* Avoid double definitions */ - /delete-property/ mmc1; /delete-property/ spi2; /delete-property/ spi3; i2c0 = &i2c2; diff --git a/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts new file mode 100644 index 000000000000..047f7b2d8526 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 DH electronics GmbH + * Copyright (C) 2023 Marantec electronics GmbH + * + * DHCOM iMX6ULL variant: + * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG + * DHCOR PCB number: 578-200 or newer + * maveo box PCB number: 525-200 or newer + */ + +/dts-v1/; + +#include "imx6ull-dhcor-som.dtsi" + +/ { + model = "DH electronics i.MX6ULL DHCOR on maveo box"; + compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som", + "fsl,imx6ull"; + + aliases { + mmc2 = &usdhc2; + spi0 = &ecspi4; + spi3 = &ecspi1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg1-vbus"; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg2-vbus"; + }; + + /* WiFi pin WL_REG_ON is connected to GPIO 5.9 */ + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT pin BT_REG_ON is connected to GPIO 1.18 */ +&bluetooth { + shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; +}; + +/* X10 connector */ +&ecspi4 { + cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi4>; + pinctrl-names = "default"; + status = "okay"; + + spidev@0 { + compatible = "dh,dhcom-board"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <54000000>; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "BUTTON-USER", "", "", + "BUTTON-RESET", "", "", "", + "", "", "", "", + "", "", "BT-REG-ON", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "PSOC-GPIO-1", "", "", "X10-12", + "X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "", + "X10-11", "X10-9", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "DHCOR-HW0", "DHCOR-HW1", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1", + "MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B", + "LED-R", "", "", "", + "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG", + "ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE", + "NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* Console UART */ +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* BT on LGA */ +&uart2 { + pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>; +}; + +/* Zigbee UART */ +&uart3 { + pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg1 { + adp-disable; + disable-over-current; /* Overcurrent pin isn't connected */ + dr_mode = "otg"; + hnp-disable; + pinctrl-0 = <&pinctrl_usbotg1>; + pinctrl-names = "default"; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; /* Overcurrent pin isn't connected */ + dr_mode = "host"; + pinctrl-0 = <&pinctrl_usbotg2>; + pinctrl-names = "default"; + tpl-support; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +/* WiFi on LGA */ +&usdhc1 { + mmc-pwrseq = <&usdhc1_pwrseq>; + pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>; +}; + +/* eMMC */ +&usdhc2 { + bus-width = <8>; + no-1-8-v; + non-removable; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog_maveo_box>; + pinctrl-names = "default"; + + pinctrl_hog_maveo_box: hog-maveo-box-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x120b0 /* BUTTON_USER */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x120b0 /* BUTTON_RESET */ + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x400120b0 /* LED_G */ + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x400120b0 /* LED_B */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x400120b0 /* LED_R */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x400120b0 /* X10_9 */ + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x400120b0 /* X10_10 */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x400120b0 /* X10_11 */ + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x400120b0 /* X10_12 */ + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x400120b0 /* PSOC_GPIO_1 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x400120b0 /* PSOC_GPIO_2 */ + MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x400120b0 /* PSOC_GPIO_3 */ + MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x120b0 /* MAVEO_BOX_HW0 */ + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x120b0 /* MAVEO_BOX_HW1 */ + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x120b0 /* MAVEO_BOX_HW2 */ + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x120b0 /* MAVEO_BOX_VAR0 */ + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x120b0 /* MAVEO_BOX_VAR1 */ + MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x120b0 /* DHCOR_HW0 */ + MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x120b0 /* DHCOR_HW1 */ + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x120b0 + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x120b0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x120b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x120b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x120b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x120b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x120b0 + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x120b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x120b0 + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x120b0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x120b0 + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x120b0 + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x120b0 + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x120b0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x120b0 + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x120b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x120b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x120b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x120b0 + >; + }; + + pinctrl_bt_gpio: bt-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x400120b0 /* BT_REG_ON */ + >; + }; + + pinctrl_ecspi4: ecspi4-grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x100b1 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x100b1 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x100b1 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* SS0 */ + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x120b0 /* USB_OTG1_PWR */ + >; + }; + + pinctrl_usbotg2: usbotg2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x120b0 /* USB_OTG2_PWR */ + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17059 /* SD2 Reset */ + >; + }; +}; + +&iomuxc_snvs { + pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>; + pinctrl-names = "default"; + + pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x400120b0 /* PSOC_SWD_IO */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x400120b0 /* PSOC_SWD_CLK */ + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x400120b0 /* PSOC_RESET */ + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x400120b0 /* PSOC_PWR_FAIL_OUT */ + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400120b0 /* NFC_ENABLE */ + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x400120b0 /* NFC_IRQ */ + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x120b0 /* DHCOR_BOOT_M0 */ + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x120b0 /* DHCOR_BOOT_M1 */ + >; + }; + + pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400120b0 /* WL_REG_ON */ + >; + }; + + pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x400120b0 /* ZIGBEE_PROG */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x400120b0 /* ZIGBEE_RESET */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f64..a386c1e9bed3 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -11,6 +11,11 @@ #include "imx6ull.dtsi" / { + aliases { + /delete-property/ mmc0; + /delete-property/ mmc1; + }; + memory@80000000 { /* Appropriate memory size will be filled by U-Boot */ reg = <0x80000000 0>; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi index 5464a52a1f94..ea627638e40c 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi @@ -260,7 +260,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; - rs485-rts-active-high; linux,rs485-enabled-at-boot-time; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts index bd6b5285aa8d..3a723843d562 100644 --- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -107,7 +107,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; status = "okay"; @@ -122,7 +121,6 @@ &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; - num-chipselects = <1>; cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index a31de900139d..9c6476bda4a0 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -159,7 +159,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e0bff39e8d3e..73d90845e85c 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -170,7 +170,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f483bc0afe5e..cc9b8570ed4d 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -43,8 +43,8 @@ compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; - gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; @@ -60,6 +60,17 @@ }; }; + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <200000>; + off-on-delay-us = <20000>; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -264,7 +275,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -473,10 +484,13 @@ }; &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; wakeup-source; keep-power-in-suspend; status = "okay"; @@ -731,6 +745,15 @@ >; }; + pinctrl_usdhc1_gpio: usdhc1_gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 @@ -739,9 +762,28 @@ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b >; }; diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts index c0f00f5db11e..85b97b5f64e7 100644 --- a/arch/arm/boot/dts/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -13,6 +13,8 @@ compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; aliases { + ethernet0 = &fec1; + ethernet1 = &fec2; mmc0 = &usdhc1; mmc1 = &usdhc3; mmc2 = &usdhc2; @@ -67,7 +69,7 @@ reg_wlan_rfkill: regulator-wlan-rfkill { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-2 = <&pinctrl_rfkill>; + pinctrl-0 = <&pinctrl_rfkill>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "wlan_rfkill"; @@ -97,8 +99,6 @@ sram@0 { compatible = "microchip,48l640"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <16000000>; }; }; @@ -329,7 +329,7 @@ >; }; - pinctrl_rfkill: rfkillrp { + pinctrl_rfkill: rfkillgrp { fsl,pins = < MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 >; @@ -355,19 +355,19 @@ >; }; - pinctrl_usbotg1_lpsr: usbotg1 { + pinctrl_usbotg1_lpsr: usbotg1grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 >; }; - pinctrl_usbotg1_pwr: usbotg1-pwr { + pinctrl_usbotg1_pwr: usbotg1-pwrgrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 >; }; - pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpiogrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 >; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index e8734d218b9d..ba7231b364bb 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -94,7 +94,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index efe2525b62fa..54026c2c93fa 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1257,7 +1257,7 @@ }; }; - dma_apbh: dma-apbh@33000000 { + dma_apbh: dma-controller@33000000 { compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x33000000 0x2000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index f91bf719d4e2..b01ddda7bd9e 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -459,6 +459,8 @@ compatible = "fsl,imx7ulp-ocotp", "syscon"; reg = <0x410a6000 0x4000>; clocks = <&scg1 IMX7ULP_CLK_DUMMY>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 03caea6fc6ff..4351c5a02fa5 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -49,7 +49,7 @@ lcd_backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000 0>; + pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts index c436cd20d4b4..0cb505f79ba1 100644 --- a/arch/arm/boot/dts/lan966x-pcb8309.dts +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts @@ -144,6 +144,18 @@ function = "fc4_b"; }; + pps_out_pins: pps-out-pins { + /* 1pps output */ + pins = "GPIO_38"; + function = "ptpsync_3"; + }; + + ptp_ext_pins: ptp-ext-pins { + /* 1pps input */ + pins = "GPIO_39"; + function = "ptpsync_4"; + }; + sgpio_a_pins: sgpio-a-pins { /* SCK, D0, D1, LD */ pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; @@ -212,5 +224,7 @@ }; &switch { + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 3240c67e0c39..c1705f6f3d10 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -15,7 +15,7 @@ &omap3_pmx_core2 { pinctrl-names = "default"; pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index c757f0d7781c..9dbbcc7ced7c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -15,7 +15,7 @@ &omap3_pmx_core2 { pinctrl-names = "default"; pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 7d0468a23781..690f2ad50c65 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -141,25 +141,25 @@ }; &omap3_pmx_core { - gpio_key_pins: pinmux_gpio_key_pins { + gpio_key_pins: gpio-key-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ >; }; - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ >; }; - lan9221_pins: pinmux_lan9221_pins { + lan9221_pins: lan9221-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -172,13 +172,13 @@ >; }; - lcd_enable_pin: pinmux_lcd_enable_pin { + lcd_enable_pin: lcd-enable-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ >; }; - dss_dpi_pins1: pinmux_dss_dpi_pins1 { + dss_dpi_pins1: dss-dpi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -206,13 +206,13 @@ }; &omap3_pmx_wkup { - led_pins_wkup: pinmux_led_pins_wkup { + led_pins_wkup: led-wkup-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ >; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 9ba0ea4eb48a..c0e6b73fa472 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -157,7 +157,7 @@ &omap3_pmx_core { - mmc3_pins: pinmux_mm3_pins { + mmc3_pins: mm3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ @@ -167,7 +167,7 @@ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ @@ -175,7 +175,7 @@ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ @@ -184,7 +184,7 @@ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -193,7 +193,7 @@ >; }; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -204,7 +204,7 @@ >; }; - hsusb_otg_pins: pinmux_hsusb_otg_pins { + hsusb_otg_pins: hsusb-otg-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ @@ -221,7 +221,7 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ @@ -229,21 +229,21 @@ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; - tsc2004_pins: pinmux_tsc2004_pins { + tsc2004_pins: tsc2004-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ >; @@ -252,12 +252,12 @@ &omap3_pmx_wkup { - hsusb2_reset_pin: pinmux_hsusb1_reset_pin { + hsusb2_reset_pin: hsusb1-reset-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; - wl127x_gpio: pinmux_wl127x_gpio_pin { + wl127x_gpio: wl127x-gpio-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index cb08aa62d967..eaa583fdc3d6 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -13,7 +13,7 @@ }; &omap3_pmx_core { - isp1763_pins: pinmux_isp1763_pins { + isp1763_pins: isp1763-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat6.gpio_128 */ >; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 07ea822fe405..533ce7ce387a 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -65,7 +65,7 @@ }; &omap3_pmx_core { - mmc3_pins: pinmux_mm3_pins { + mmc3_pins: mm3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ @@ -78,7 +78,7 @@ }; &omap3_pmx_core2 { - mmc3_core2_pins: pinmux_mmc3_core2_pins { + mmc3_core2_pins: mmc3-core2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ @@ -88,7 +88,7 @@ /* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */ &omap3_pmx_wkup { - isp1763_pins: pinmux_isp1763_pins { + isp1763_pins: isp1763-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_128 */ >; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index e0cbac500e17..e0caed539810 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -209,33 +209,33 @@ }; &omap3_pmx_core { - gpio_key_pins: pinmux_gpio_key_pins { + gpio_key_pins: gpio-key-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ >; }; - hdq_pins: hdq_pins { + hdq_pins: hdq-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */ >; }; - pwm_pins: pinmux_pwm_pins { + pwm_pins: pwm-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ >; }; - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -246,19 +246,19 @@ >; }; - tsc2004_pins: pinmux_tsc2004_pins { + tsc2004_pins: tsc2004-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ >; }; - isp_pins: pinmux_isp_pins { + isp_pins: isp-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ @@ -276,13 +276,13 @@ >; }; - panel_pwr_pins: pinmux_panel_pwr_pins { + panel_pwr_pins: panel-pwr-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ >; }; - dss_dpi_pins1: pinmux_dss_dpi_pins1 { + dss_dpi_pins1: dss-dpi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -313,20 +313,20 @@ }; &omap3_pmx_wkup { - gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { + gpio_key_pins_wkup: gpio-key-wkup-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ >; }; - lan9221_pins: pinmux_lan9221_pins { + lan9221_pins: lan9221-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ >; }; - mmc1_cd: pinmux_mmc1_cd { + mmc1_cd: mmc1-cd-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ >; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 72b5af475d09..227699890890 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -111,7 +111,7 @@ }; &omap3_pmx_core { - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ @@ -119,7 +119,7 @@ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ @@ -128,7 +128,7 @@ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -136,7 +136,7 @@ OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ >; }; - hsusb_otg_pins: pinmux_hsusb_otg_pins { + hsusb_otg_pins: hsusb-otg-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ @@ -153,19 +153,19 @@ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi index 5bf831b072d6..e3b2d23068f7 100644 --- a/arch/arm/boot/dts/mba6ulx.dtsi +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -57,7 +57,7 @@ label = "POWER"; linux,code = <KEY_POWER>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -235,6 +235,7 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <®_mba6ul_3v3>; }; expander_in0: gpio-expander@21 { @@ -248,6 +249,7 @@ #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <®_mba6ul_3v3>; enet1_int-hog { gpio-hog; @@ -267,6 +269,7 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <®_mba6ul_3v3>; }; analog_touch: touchscreen@41 { @@ -300,6 +303,7 @@ compatible = "nxp,se97b", "atmel,24c02"; reg = <0x51>; pagesize = <16>; + vcc-supply = <®_mba6ul_3v3>; }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 4f22ab451aae..59932fbfd5d5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -769,13 +769,13 @@ &uart_B { compatible = "amlogic,meson8-uart"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk", "baud"; }; &uart_C { compatible = "amlogic,meson8-uart"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 5979209fe91e..5198f5177c2c 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -740,13 +740,13 @@ &uart_B { compatible = "amlogic,meson8b-uart"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk", "baud"; }; &uart_C { compatible = "amlogic,meson8b-uart"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index f7cc8fc678fa..091ba310053e 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -352,13 +352,13 @@ &omap4_pmx_core { /* hdmi_hpd.gpio_63 */ - hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + hdmi_hpd_gpio: hdmi-hpd-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) >; }; - hdq_pins: pinmux_hdq_pins { + hdq_pins: hdq-pins { pinctrl-single,pins = < /* 0x4a100120 hdq_sio.hdq_sio aa27 */ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) @@ -366,7 +366,7 @@ }; /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) @@ -380,7 +380,7 @@ * devices. Off mode value should be tested if we have off mode working * later on. */ - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) @@ -406,40 +406,40 @@ }; /* gpmc_ncs0.gpio_50 */ - poweroff_gpio: pinmux_poweroff_pins { + poweroff_gpio: poweroff-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) >; }; /* kpd_row0.gpio_178 */ - tmp105_irq: pinmux_tmp105_irq { + tmp105_irq: tmp105-irq-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) >; }; - usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins { /* gpio_60 */ pinctrl-single,pins = < OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) >; }; - touchscreen_pins: pinmux_touchscreen_pins { + touchscreen_pins: touchscreen-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) >; }; - als_proximity_pins: pinmux_als_proximity_pins { + als_proximity_pins: als-proximity-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) >; }; - usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + usb_mdm6600_pins: usb-mdm6600-pins { pinctrl-single,pins = < /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) @@ -476,7 +476,7 @@ >; }; - usb_ulpi_pins: pinmux_usb_ulpi_pins { + usb_ulpi_pins: usb-ulpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) @@ -496,7 +496,7 @@ }; /* usb0_otg_dp and usb0_otg_dm */ - usb_utmi_pins: pinmux_usb_utmi_pins { + usb_utmi_pins: usb-utmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) @@ -521,7 +521,7 @@ * when not used. If needed, we can add rts pin remux later based * on power measurements. */ - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) @@ -538,7 +538,7 @@ }; /* uart3_tx_irtx and uart3_rx_irrx */ - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) @@ -557,7 +557,7 @@ >; }; - uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ @@ -566,7 +566,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ @@ -575,7 +575,7 @@ >; }; - mcbsp3_pins: pinmux_mcbsp3_pins { + mcbsp3_pins: mcbsp3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ @@ -584,13 +584,13 @@ >; }; - vibrator_direction_pin: pinmux_vibrator_direction_pin { + vibrator_direction_pin: vibrator-direction-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ >; }; - vibrator_enable_pin: pinmux_vibrator_enable_pin { + vibrator_enable_pin: vibrator-enable-pins { pinctrl-single,pins = < OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ >; @@ -598,7 +598,7 @@ }; &omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins { /* gpio_wk0 */ pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 09c1dbc0bb69..3bf8175d85a8 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -23,7 +23,7 @@ }; &omap2420_pmx { - mcbsp2_pins: mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */ OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */ @@ -32,7 +32,7 @@ >; }; - aic33_pins: aic33_pins { + aic33_pins: aic33-pins { pinctrl-single,pins = < OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */ OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */ diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1a085bc01317..08ee0f8ea68f 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -90,7 +90,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; @@ -183,13 +183,13 @@ }; &omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; - dss_dpi_pins2: pinmux_dss_dpi_pins1 { + dss_dpi_pins2: dss-dpi1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ @@ -207,14 +207,14 @@ &hsusb2_pins >; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; }; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -225,7 +225,7 @@ >; }; - dss_dpi_pins1: pinmux_dss_dpi_pins2 { + dss_dpi_pins1: dss-dpi2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -261,7 +261,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 47ff1ffddfc5..4d9a8eab6abf 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -57,7 +57,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; @@ -170,7 +170,7 @@ }; &omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ >; @@ -183,7 +183,7 @@ &hsusb2_pins >; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -194,20 +194,20 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - tfp410_pins: pinmux_tfp410_pins { + tfp410_pins: tfp410-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -247,7 +247,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index f25c0a84a190..f776e0527049 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -43,7 +43,7 @@ &omap3_pmx_wkup { - wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + wl12xx_wkup_pins: wl12xx-wkup-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4) /* sys_boot4.gpio_6 */ @@ -53,25 +53,25 @@ &omap3_pmx_core { - phy1_reset_pins: pinmux_hsusb1_phy_reset_pins { + phy1_reset_pins: hsusb1-phy-reset-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4) /* uart2_tx.gpio_146 */ >; }; - phy2_reset_pins: pinmux_hsusb2_phy_reset_pins { + phy2_reset_pins: hsusb2-phy-reset-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4) /* uart2_rx.gpio_147 */ >; }; - otg_drv_vbus: pinmux_otg_drv_vbus { + otg_drv_vbus: otg-drv-vbus-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -82,14 +82,14 @@ >; }; - wl12xx_core_pins: pinmux_wl12xx_core_pins { + wl12xx_core_pins: wl12xx-core-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_rts.gpio_145 */ >; }; - usb_hub_pins: pinmux_usb_hub_pins { + usb_hub_pins: usb-hub-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_clkx.gpio_152 - USB HUB RST */ >; diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index bc545ee23e71..0c6f14963e5e 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -23,7 +23,7 @@ }; &omap3_pmx_core { - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index e1b1a047f77a..f1a8f0fd7a83 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -33,7 +33,7 @@ }; &omap3_pmx_wkup { - dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 { + dss_dpi_pins_cm_t3730: dss-dpi-cm-t3730-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ @@ -47,7 +47,7 @@ &omap3_pmx_core { - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -58,7 +58,7 @@ >; }; - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */ diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e61b8a2bfb7d..f6cd7a3aef1f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -47,7 +47,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb2_power>; #phy-cells = <0>; @@ -74,14 +74,14 @@ &omap3_pmx_core { - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -92,13 +92,13 @@ >; }; - green_led_pins: pinmux_green_led_pins { + green_led_pins: green-led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ >; }; - dss_dpi_pins_common: pinmux_dss_dpi_pins_common { + dss_dpi_pins_common: dss-dpi-common-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -126,7 +126,7 @@ >; }; - dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x { + dss_dpi_pins_cm_t35x: dss-dpi-cm-t35x-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ @@ -137,13 +137,13 @@ >; }; - ads7846_pins: pinmux_ads7846_pins { + ads7846_pins: ads7846-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */ @@ -152,14 +152,14 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 5e8943539fcc..0e942513560d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -22,14 +22,14 @@ &omap3_pmx_core { - smsc1_pins: pinmux_smsc1_pins { + smsc1_pins: smsc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */ >; }; - hsusb0_pins: pinmux_hsusb0_pins { + hsusb0_pins: hsusb0-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 38aa1febc33f..3b9838f1bb6b 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -312,7 +312,7 @@ }; &omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts index 06d2377d28ad..263e517944dd 100644 --- a/arch/arm/boot/dts/omap3-echo.dts +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -524,13 +524,13 @@ #include "tps65910.dtsi" &omap3_pmx_core { - tps_pins: pinmux_tps_pins { + tps_pins: tps-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ @@ -540,7 +540,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -551,7 +551,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -566,7 +566,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ @@ -577,7 +577,7 @@ }; &omap3_pmx_core2 { - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index abd403c228c7..e0346bf842fc 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -17,7 +17,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hsusb2_2_pins>; - ehci_phy_pins: pinmux_ehci_phy_pins { + ehci_phy_pins: ehci-phy-pins { pinctrl-single,pins = < /* EHCI PHY reset GPIO etk_d7.gpio_21 */ @@ -29,7 +29,7 @@ }; /* Used by OHCI and EHCI. OHCI won't work without external phy */ - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < /* etk_d10.hsusb2_clk */ diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 17c89df6ce6b..1b6023c4cdf3 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -25,7 +25,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ vcc-supply = <&hsusb2_power>; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi index e6ba30a21166..e27837093e43 100644 --- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -33,7 +33,7 @@ pinctrl-names = "default"; pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; - dss_dpi_pins1: pinmux_dss_dpi_pins2 { + dss_dpi_pins1: dss-dpi2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -62,7 +62,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -78,7 +78,7 @@ }; /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -93,7 +93,7 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ @@ -101,14 +101,14 @@ }; /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ - on_board_gpio_61: pinmux_ehci_port_select_pins { + on_board_gpio_61: ehci-port-select-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) >; }; /* Used by OHCI and EHCI. OHCI won't work without external phy */ - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < /* mcspi1_cs3.hsusb2_data2 */ @@ -135,14 +135,14 @@ * Note that gpio_150 pulled high with internal pull to prevent wlcore * reset on return from off mode in idle. */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; - smsc911x_pins: pinmux_smsc911x_pins { + smsc911x_pins: smsc911x-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; @@ -150,7 +150,7 @@ }; &omap3_pmx_wkup { - dss_dpi_pins2: pinmux_dss_dpi_pins1 { + dss_dpi_pins2: dss-dpi1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f95eea63b355..a2a1613c45c3 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,7 +17,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hsusb2_2_pins>; - ehci_phy_pins: pinmux_ehci_phy_pins { + ehci_phy_pins: ehci-phy-pins { pinctrl-single,pins = < /* EHCI PHY reset GPIO etk_d7.gpio_21 */ @@ -29,7 +29,7 @@ }; /* Used by OHCI and EHCI. OHCI won't work without external phy */ - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < /* etk_d10.hsusb2_clk */ diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4183fde46059..b6b27e93857f 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -153,7 +153,7 @@ ti,clock-source = <0x01>; }; - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; #phy-cells = <0>; @@ -200,7 +200,7 @@ }; /* devconf0 setup for mcbsp1 clock pins */ - pinmux_mcbsp1@48002274 { + pinmux@48002274 { compatible = "pinctrl-single"; reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ #address-cells = <1>; @@ -211,14 +211,14 @@ #pinctrl-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_devconf0_pins>; - mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { + mcbsp1_devconf0_pins: mcbsp1-devconf0-pins { /* offset bits mask */ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ }; }; /* devconf1 setup for tvout pins */ - pinmux_tv_out@480022d8 { + pinmux@480022d8 { compatible = "pinctrl-single"; reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ #address-cells = <1>; @@ -229,7 +229,7 @@ #pinctrl-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&tv_acbias_devconf1_pins>; - tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { + tv_acbias_devconf1_pins: tv-acbias-devconf1-pins { /* offset bits mask */ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ }; @@ -237,7 +237,7 @@ }; &omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ @@ -251,7 +251,7 @@ &hsusb2_pins >; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -262,28 +262,28 @@ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -294,13 +294,13 @@ >; }; - backlight_pins: backlight_pins_pinmux { + backlight_pins: backlight-pinmux-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -333,50 +333,50 @@ >; }; - gps_pins: pinmux_gps_pins { + gps_pins: gps-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ >; }; - hdq_pins: hdq_pins { + hdq_pins: hdq-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ >; }; - bmp085_pins: pinmux_bmp085_pins { + bmp085_pins: bmp085-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ >; }; - bma180_pins: pinmux_bma180_pins { + bma180_pins: bma180-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ >; }; - itg3200_pins: pinmux_itg3200_pins { + itg3200_pins: itg3200-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ >; }; - hmc5843_pins: pinmux_hmc5843_pins { + hmc5843_pins: hmc5843-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; - penirq_pins: pinmux_penirq_pins { + penirq_pins: penirq-pins { pinctrl-single,pins = < /* here we could enable to wakeup the cpu from suspend by a pen touch */ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ >; }; - camera_pins: pinmux_camera_pins { + camera_pins: camera-pins { pinctrl-single,pins = < /* set up parallel camera interface */ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ @@ -402,7 +402,7 @@ >; }; - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ @@ -415,7 +415,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ @@ -424,7 +424,7 @@ >; }; - mcbsp3_pins: pinmux_mcbsp3_pins { + mcbsp3_pins: mcbsp3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ @@ -433,7 +433,7 @@ >; }; - mcbsp4_pins: pinmux_mcbsp4_pins { + mcbsp4_pins: mcbsp4-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ @@ -448,7 +448,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -459,7 +459,7 @@ >; }; - spi_gpio_pins: spi_gpio_pinmux { + spi_gpio_pins: spi-gpio-pinmux-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index 425081201fd4..8bd6b4b1f30b 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -45,31 +45,31 @@ }; &omap3_pmx_core { - bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ >; }; - wlan_pins: pinmux_wlan_pins { + wlan_pins: wlan-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ >; }; - wlan_irq_pin: pinmux_wlan_irq_pin { + wlan_irq_pin: wlan-irq-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ >; }; - irda_pins: pinmux_irda { + irda_pins: irda-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ >; }; - pps_pins: pinmux_pps_pins { + pps_pins: pps-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ >; diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts index 9db9fe67cd63..1e5703d1b02e 100644 --- a/arch/arm/boot/dts/omap3-gta04a5one.dts +++ b/arch/arm/boot/dts/omap3-gta04a5one.dts @@ -5,10 +5,12 @@ #include "omap3-gta04a5.dts" -&omap3_pmx_core { +/ { model = "Goldelico GTA04A5/Letux 2804 with OneNAND"; +}; - gpmc_pins: pinmux_gpmc_pins { +&omap3_pmx_core { + gpmc_pins: gpmc-pins { pinctrl-single,pins = < /* address lines */ diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi index a010585d0302..3a258a692757 100644 --- a/arch/arm/boot/dts/omap3-ha-common.dtsi +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -17,43 +17,43 @@ }; &omap3_pmx_core { - sound2_pins: pinmux_sound2_pins { + sound2_pins: sound2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ >; }; - led_blue_pins: pinmux_led_blue_pins { + led_blue_pins: led-blue-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ >; }; - led_green_pins: pinmux_led_green_pins { + led_green_pins: led-green-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ >; }; - led_red_pins: pinmux_led_red_pins { + led_red_pins: led-red-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ >; }; - poweroff_pins: pinmux_poweroff_pins { + poweroff_pins: poweroff-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ >; }; - powerdown_input_pins: pinmux_powerdown_input_pins { + powerdown_input_pins: powerdown-input-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ >; }; - fpga_boot0_pins: fpga_boot0_pins { + fpga_boot0_pins: fpga-boot0-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ @@ -62,7 +62,7 @@ >; }; - fpga_boot1_pins: fpga_boot1_pins { + fpga_boot1_pins: fpga-boot1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index 643283f0c3db..94f6b7931e33 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -24,19 +24,19 @@ &touchscreen_wake_pins >; - touchscreen_irq_pins: pinmux_touchscreen_irq_pins { + touchscreen_irq_pins: touchscreen-irq-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */ >; }; - touchscreen_wake_pins: pinmux_touchscreen_wake_pins { + touchscreen_wake_pins: touchscreen-wake-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -69,13 +69,13 @@ >; }; - lte430_pins: pinmux_lte430_pins { + lte430_pins: lte430-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ >; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 219202610463..e068ecf86b8f 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -34,28 +34,28 @@ }; &omap3_pmx_core { - gpmc_pins: pinmux_gpmc_pins { + gpmc_pins: gpmc-pins { pinctrl-single,pins = < /* OneNAND seems to require PIN_INPUT on clock. */ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ @@ -64,7 +64,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -75,7 +75,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -86,14 +86,14 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 73d8f471b9ec..13f434625407 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -107,13 +107,13 @@ &dss_dpi_pins >; - tfp410_pins: pinmux_tfp410_pins { + tfp410_pins: tfp410-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -146,7 +146,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ @@ -155,7 +155,7 @@ >; }; - smsc9221_pins: pinmux_smsc9221_pins { + smsc9221_pins: smsc9221-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; @@ -168,7 +168,7 @@ &hsusbb1_pins >; - hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ @@ -185,7 +185,7 @@ >; }; - leds_pins: pinmux_leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ @@ -193,7 +193,7 @@ >; }; - mmc1_wp_pins: pinmux_mmc1_cd_pins { + mmc1_wp_pins: mmc1-cd-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index eadb5b857f48..316e8e6b39cd 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -24,7 +24,7 @@ }; &omap3_pmx_core { - lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + lbep5clwmc_pins: lbep5clwmc-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4) /* mcspi1_cs3.gpio_177 - W_IRQ */ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 3f0197ceae09..232cf9187822 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -27,7 +27,7 @@ }; &omap3_pmx_core { - lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + lbee1usjyc_pins: lbee1usjyc-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 742e3e147063..d434f75aadac 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -31,7 +31,7 @@ }; }; - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ #phy-cells = <0>; @@ -42,7 +42,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hsusb2_pins>; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -53,7 +53,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ @@ -67,7 +67,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hsusb2_core2_pins>; - hsusb2_core2_pins: pinmux_hsusb2_core2_pins { + hsusb2_core2_pins: hsusb2-core2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -78,7 +78,7 @@ >; }; - leds_core2_pins: pinmux_leds_core2_pins { + leds_core2_pins: leds-core2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index bc95a8df2e6a..fddd7c86fec4 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -24,7 +24,7 @@ }; &omap3_pmx_core { - lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + lbep5clwmc_pins: lbep5clwmc-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ @@ -32,7 +32,7 @@ >; }; - leds_pins: pinmux_leds_pins { + leds_pins: leds-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index d36ceecb7328..e3f99dbef2a1 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -27,7 +27,7 @@ }; &omap3_pmx_core { - lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + lbee1usjyc_pins: lbee1usjyc-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 85f33bbb566f..bb6fab9fa47d 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -223,7 +223,7 @@ }; &omap3_pmx_core { - gpio_key_pins: pinmux_gpio_key_pins { + gpio_key_pins: gpio-key-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ @@ -237,7 +237,7 @@ >; }; - musb_pins: pinmux_musb_pins { + musb_pins: musb-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ @@ -254,7 +254,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c595afe4181d..005a3d67f3ed 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -54,19 +54,19 @@ &omap3_pmx_wkup { pinctrl-names = "default"; - lan9221_pins: pinmux_lan9221_pins { + lan9221_pins: lan9221-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ >; }; - tsc2048_pins: pinmux_tsc2048_pins { + tsc2048_pins: tsc2048-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */ >; }; - mmc1cd_pins: pinmux_mmc1cd_pins { + mmc1cd_pins: mmc1cd-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */ >; @@ -76,7 +76,7 @@ &omap3_pmx_core { pinctrl-names = "default"; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ @@ -85,42 +85,42 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; - hsusb1_pins: pinmux_hsusb1_pins { + hsusb1_pins: hsusb1-pins { pinctrl-single,pins = < /* GPIO 182 controls USB-Hub reset. But USB-Phy its @@ -132,7 +132,7 @@ >; }; - hsusb_otg_pins: pinmux_hsusb_otg_pins { + hsusb_otg_pins: hsusb-otg-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ @@ -149,7 +149,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -160,7 +160,7 @@ >; }; - spi2_pins: pinmux_spi2_pins { + spi2_pins: spi2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */ @@ -173,7 +173,7 @@ &omap3_pmx_core2 { pinctrl-names = "default"; - hsusb1_2_pins: pinmux_hsusb1_2_pins { + hsusb1_2_pins: hsusb1-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ @@ -190,7 +190,7 @@ >; }; - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */ >; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index f6bbea2be54c..0891c6682a67 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -24,25 +24,25 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_pins>; - lan9117_pins: pinmux_lan9117_pins { + lan9117_pins: lan9117-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* cam_fld.gpio_98 */ >; }; - gpio4_pins: pinmux_gpio4_pins { + gpio4_pins: gpio4-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* cam_xclkb.gpio_111 -> sja1000 IRQ */ >; }; - gpio5_pins: pinmux_gpio5_pins { + gpio5_pins: gpio5-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcbsp1_clk.gpio_156 -> enable DSS */ >; }; - lcd_pins: pinmux_lcd_pins { + lcd_pins: lcd-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -69,7 +69,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -86,7 +86,7 @@ >; }; - spi1_pins: pinmux_spi1_pins { + spi1_pins: spi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index f9f9eca0c56c..d33485341251 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -209,7 +209,7 @@ &omap3_pmx_core { pinctrl-names = "default"; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ @@ -218,14 +218,14 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ >; }; - ethernet_pins: pinmux_ethernet_pins { + ethernet_pins: ethernet-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ @@ -233,7 +233,7 @@ >; }; - gpmc_pins: pinmux_gpmc_pins { + gpmc_pins: gpmc-pins { pinctrl-single,pins = < /* address lines */ @@ -260,34 +260,34 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; - debug_leds: pinmux_debug_led_pins { + debug_leds: debug-led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ >; }; - mcspi4_pins: pinmux_mcspi4_pins { + mcspi4_pins: mcspi4-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ @@ -296,7 +296,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ @@ -307,7 +307,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ @@ -322,13 +322,13 @@ >; }; - acx565akm_pins: pinmux_acx565akm_pins { + acx565akm_pins: acx565akm-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ >; }; - dss_sdi_pins: pinmux_dss_sdi_pins { + dss_sdi_pins: dss-sdi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ @@ -340,14 +340,14 @@ >; }; - wl1251_pins: pinmux_wl1251 { + wl1251_pins: wl1251-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ >; }; - ssi_pins: pinmux_ssi { + ssi_pins: ssi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ @@ -360,7 +360,7 @@ >; }; - modem_pins: pinmux_modem { + modem_pins: modem-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ @@ -371,7 +371,7 @@ >; }; - camera_pins: pinmux_camera { + camera_pins: camera-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index f68da828b050..aa4fcdbedd8f 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -57,20 +57,20 @@ }; &omap3_pmx_core { - accelerator_pins: pinmux_accelerator_pins { + accelerator_pins: accelerator-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */ >; }; - debug_leds: pinmux_debug_led_pins { + debug_leds: debug-led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ @@ -81,14 +81,14 @@ >; }; - wlan_pins: pinmux_wlan_pins { + wlan_pins: wlan-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ >; }; - ssi_pins: pinmux_ssi_pins { + ssi_pins: ssi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ @@ -101,7 +101,7 @@ >; }; - ssi_pins_idle: pinmux_ssi_pins_idle { + ssi_pins_idle: ssi-idle-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ @@ -114,7 +114,7 @@ >; }; - modem_pins1: pinmux_modem_core1_pins { + modem_pins1: modem-core1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ @@ -122,7 +122,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ @@ -133,7 +133,7 @@ }; &omap3_pmx_core2 { - modem_pins2: pinmux_modem_core2_pins { + modem_pins2: modem-core2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ >; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index cbaf79c4e842..b99f97880204 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -30,7 +30,7 @@ }; &omap3_pmx_core { - keypad_slide_pins: pinmux_debug_led_pins { + keypad_slide_pins: debug-led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ >; @@ -38,7 +38,7 @@ }; &omap3_pmx_core { - spi4_pins: pinmux_spi4_pins { + spi4_pins: spi4-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ @@ -49,7 +49,7 @@ }; &omap3_pmx_core { - dsi_pins: pinmux_dsi_pins { + dsi_pins: dsi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */ @@ -60,7 +60,7 @@ >; }; - display_pins: pinmux_display_pins { + display_pins: display-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */ diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index a6dbbba799b2..7f1671bf3dfa 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -51,7 +51,7 @@ }; &omap3_pmx_core { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4) /* uart1_tx.gpio_148 */ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ @@ -62,7 +62,7 @@ }; &omap3_pmx_wkup { - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4) /* sys_clkout1.gpio_10 */ >; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index adc714c39825..cc57626ea607 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -44,7 +44,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */ vcc-supply = <&hsusb2_power>; @@ -80,7 +80,7 @@ &hsusb2_pins >; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ @@ -89,14 +89,14 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -107,7 +107,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -119,14 +119,14 @@ }; /* WiFi/BT combo */ - w3cbw003c_pins: pinmux_w3cbw003c_pins { + w3cbw003c_pins: w3cbw003c-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ >; }; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts index d147d704b89f..bb53c76fff6c 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-chestnut43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index 339a51fa4119..b1a800f2e940 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -8,7 +8,7 @@ */ &omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 1d6e88f99eb3..5a8cb309c71a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -8,7 +8,7 @@ */ &omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -41,19 +41,19 @@ >; }; - lb035_pins: pinmux_lb035_pins { + lb035_pins: lb035-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -63,7 +63,7 @@ >; }; - ads7846_pins: pinmux_ads7846_pins { + ads7846_pins: ads7846-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ >; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e30f9d45790..c489c06f6cc7 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -8,7 +8,7 @@ */ &omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -41,19 +41,19 @@ >; }; - lte430_pins: pinmux_lte430_pins { + lte430_pins: lte430-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -62,7 +62,7 @@ >; }; - ads7846_pins: pinmux_ads7846_pins { + ads7846_pins: ads7846-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ >; diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi index 8a4a02472c9a..00369f699e20 100644 --- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi @@ -24,14 +24,14 @@ }; &omap3_pmx_core { - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts index 24b40bdf7ea1..d882a58028c1 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-gallop43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts index 55e08d56b18b..39c8e9ce5776 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-palo35.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts index 092c8325a133..2c0f755ec8cc 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-palo43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index 3af8d10d7224..25e82efe4f3b 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 813e3c9fe3b6..0c93ea3f9774 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index 8405bd9262de..9468ef9f9742 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index b9558d736e79..9feead584479 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -18,14 +18,14 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index fcfc449f2abe..92f56b9d009d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -18,7 +18,7 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ >; diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi index 2af15d5f61f9..da583b47ed8d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm.dtsi +++ b/arch/arm/boot/dts/omap3-overo-storm.dtsi @@ -12,7 +12,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -23,7 +23,7 @@ >; }; - w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins { + w3cbw003c_2_pins: w3cbw003c-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ >; diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts index a6c9799fe491..da5ca80430ae 100644 --- a/arch/arm/boot/dts/omap3-overo-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-summit.dts @@ -18,7 +18,7 @@ }; &omap3_pmx_core2 { - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ >; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index cc9263e99254..7dc044e87226 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -12,7 +12,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -23,7 +23,7 @@ >; }; - w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins { + w3cbw003c_2_pins: w3cbw003c-2-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ >; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index c0252f8a798a..8d8c9085e6ff 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -27,7 +27,7 @@ &control_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -38,7 +38,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ @@ -49,7 +49,7 @@ >; }; - control_pins: pinmux_control_pins { + control_pins: control-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts index 6bd9041942f2..2d5eac3ffc6c 100644 --- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -27,7 +27,7 @@ &control_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -38,7 +38,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ @@ -49,7 +49,7 @@ >; }; - control_pins: pinmux_control_pins { + control_pins: control-pins { pinctrl-single,pins = < OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 559853764487..e91000f5f304 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -205,7 +205,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ vcc-supply = <&vaux2>; @@ -251,7 +251,7 @@ &omap3_pmx_core { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -262,7 +262,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -277,7 +277,7 @@ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -311,14 +311,14 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - led_pins: pinmux_leds_pins { + led_pins: leds-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ @@ -327,7 +327,7 @@ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ @@ -349,7 +349,7 @@ >; }; - penirq_pins: pinmux_penirq_pins { + penirq_pins: penirq-pins { pinctrl-single,pins = < /* here we could enable to wakeup the cpu from suspend by a pen touch */ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 5ec0893415e0..6730c749d5ea 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -56,27 +56,27 @@ }; &omap3_pmx_core { - smsc2_pins: pinmux_smsc2_pins { + smsc2_pins: smsc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; - tfp410_pins: pinmux_tfp410_pins { + tfp410_pins: tfp410-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - sb_t35_audio_amp: pinmux_sb_t35_audio_amp { + sb_t35_audio_amp: sb-t35-audio-amp-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */ >; diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index a69d32860421..07bec48dc441 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -36,14 +36,14 @@ &usb_hub_pins >; - mmc1_aux_pins: pinmux_mmc1_aux_pins { + mmc1_aux_pins: mmc1-aux-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */ >; }; - sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { + sb_t35_usb_hub_pins: sb-t35-usb-hub-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */ >; diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index 24bf3fd86641..1beefc319422 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -20,7 +20,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sb_t35_usb_hub_pins>; - sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { + sb_t35_usb_hub_pins: sb-t35-usb-hub-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */ >; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 4c36bde62491..aefc1187ebc9 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -20,7 +20,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sb_t35_usb_hub_pins>; - sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { + sb_t35_usb_hub_pins: sb-t35-usb-hub-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */ >; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 0591af494184..79e004057482 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -26,48 +26,48 @@ &omap3_pmx_core { pinctrl-names = "default"; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ >; }; - dp3t_sel_pins: pinmux_dp3t_sel_pins { + dp3t_sel_pins: dp3t-sel-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; - lp8720_en_pin: pinmux_lp8720_en_pin { + lp8720_en_pin: lp8720-en-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ @@ -78,7 +78,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ @@ -93,7 +93,7 @@ >; }; - usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + usb_otg_hs_pins: usb-otg-hs-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */ @@ -114,7 +114,7 @@ &omap3_pmx_wkup { pinctrl-names = "default"; - mmc1_cd_pin: pinmux_mmc1_cd_pin { + mmc1_cd_pin: mmc1-cd-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */ >; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 7f440d11f7e7..92a5846048bd 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -43,7 +43,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ vcc-supply = <&hsusb2_power>; @@ -70,7 +70,7 @@ }; &omap3_pmx_core { - hsusbb2_pins: pinmux_hsusbb2_pins { + hsusbb2_pins: hsusbb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -87,7 +87,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -102,7 +102,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -114,27 +114,27 @@ }; /* wlan GPIO output for WLAN_EN */ - wlan_gpio: pinmux_wlan_gpio { + wlan_gpio: wlan-gpio-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -143,7 +143,7 @@ >; }; - mcspi3_pins: pinmux_mcspi3_pins { + mcspi3_pins: mcspi3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ @@ -152,7 +152,7 @@ >; }; - mcbsp3_pins: pinmux_mcbsp3_pins { + mcbsp3_pins: mcbsp3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index d82cab8e213a..c87956c59b08 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -12,7 +12,7 @@ }; &omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -45,13 +45,13 @@ >; }; - lte430_pins: pinmux_lte430_pins { + lte430_pins: lte430-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ >; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ab52e8d68f76..9f1e125fd77b 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -49,7 +49,7 @@ &omap3_pmx_core { /* REVISIT: twl gpio0 is mmc0_cd */ - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -60,7 +60,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -75,14 +75,14 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ @@ -91,7 +91,7 @@ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ @@ -100,7 +100,7 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ @@ -110,7 +110,7 @@ }; /* wl12xx GPIO output for WLAN_EN */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */ >; @@ -118,7 +118,7 @@ }; &omap3_pmx_core2 { - mmc3_2_pins: pinmux_mmc3_2_pins { + mmc3_2_pins: mmc3-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ @@ -130,7 +130,7 @@ }; &omap3_pmx_wkup { - wlan_host_wkup: pinmux_wlan_host_wkup_pins { + wlan_host_wkup: wlan-host-wkup-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */ >; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index b294c22177cb..6d1beb453234 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -62,33 +62,33 @@ &smsc_pins >; - led_pins: pinmux_led_pins { + led_pins: led-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - smsc_pins: pinmux_smsc_pins { + smsc_pins: smsc-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ @@ -96,7 +96,7 @@ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 805dfd40030d..b8af455b411a 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -73,14 +73,14 @@ &hsusbb1_pins >; - twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -89,7 +89,7 @@ >; }; - hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -106,34 +106,34 @@ >; }; - hsusb1phy_pins: pinmux_hsusb1phy_pins { + hsusb1phy_pins: hsusb1phy-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ >; }; - w2cbw0015_pins: pinmux_w2cbw0015_pins { + w2cbw0015_pins: w2cbw0015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ @@ -144,7 +144,7 @@ >; }; - mmc5_pins: pinmux_mmc5_pins { + mmc5_pins: mmc5-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ diff --git a/arch/arm/boot/dts/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/omap4-epson-embt2ws.dts new file mode 100644 index 000000000000..e119e2cccc4e --- /dev/null +++ b/arch/arm/boot/dts/omap4-epson-embt2ws.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Andreas Kemnade + */ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap4460.dtsi" + +/ { + model = "Epson Moverio BT-200"; + compatible = "epson,embt2ws", "ti,omap4460", "ti,omap4"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024M */ + }; + + backlight-left { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 1 7812500>; + power-supply = <&unknown_supply>; + }; + + backlight-right { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 0 7812500>; + power-supply = <&unknown_supply>; + }; + + chosen { + stdout-path = &uart3; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + key-lock { + label = "Lock"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <SW_ROTATE_LOCK>; /* SW_TOUCHPAD_LOCK */ + linux,input-type = <EV_SW>; + }; + }; + + unknown_supply: unknown-supply { + compatible = "regulator-fixed"; + regulator-name = "unknown"; + }; + + /* regulator for wl12xx on sdio2 */ + wl12xx_vmmc: wl12xx-vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: pmic@48 { + compatible = "ti,twl6032"; + reg = <0x48>; + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + ldo2: regulator-ldo2 { + compatible = "ti,twl6032-ldo2"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo4: regulator-ldo4 { + compatible = "ti,twl6032-ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + }; + + ldo3: regulator-ldo3 { + compatible = "ti,twl6032-ldo3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo5: regulator-ldo5 { + compatible = "ti,twl6032-ldo5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + ti,retain-on-reset; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,twl6032-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + }; + + ldo7: regulator-ldo7 { + compatible = "ti,twl6032-ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2900000>; + }; + + ldoln: regulator-ldoln { + compatible = "ti,twl6032-ldoln"; + regulator-always-on; + }; + + ldo6: regulator-ldo6 { + compatible = "ti,twl6032-ldo6"; + regulator-always-on; + }; + + ldousb: regulator-ldousb { + compatible = "ti,twl6032-ldousb"; + regulator-always-on; + }; + + vio: regulator-vio { + compatible = "ti,twl6032-vio"; + regulator-always-on; + }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; + + twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charging indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; + + gpadc { + compatible = "ti,twl6032-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + + }; +}; + +#include "twl6030_omap4.dtsi" + +&twl_usb_comparator { + usb-supply = <&ldousb>; +}; + + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <200000>; + + /* at head/glasses */ + mpu9150h: imu@68 { + compatible = "invensense,mpu9150"; + reg = <0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu9150h_pins>; + interrupt-parent = <&gpio2>; + interrupt = <19 IRQ_TYPE_LEVEL_HIGH>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; + + /* TODO: BD2606MVV at 0x66 */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <360000>; + + /* TODO: KXTI9 at 0xf */ + + tlv320aic3x: codec@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&tlv320aic3x_pins>; + #sound-dai-cells = <0>; + + reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + }; + + /* TODO: mpu9150 at control unit, seems to require quirks */ +}; + +&keypad { + pinctrl-names = "default"; + pinctrl-0 = <&keypad_pins>; + keypad,num-rows = <2>; + keypad,num-columns = <3>; + linux,keymap = <MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 1, KEY_HOME) + MATRIX_KEY(0, 2, KEY_BACK) + MATRIX_KEY(1, 0, KEY_ESC) + MATRIX_KEY(1, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(1, 2, KEY_VOLUMEUP)>; + linux,input-no-autorepeat; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + + +&mmc1 { + /* sdcard */ + vmmc-supply = <&ldo5>; + broken-cd; + bus-width = <4>; +}; + +&mmc2 { + /* emmc */ + vmmc-supply = <&ldo2>; + bus-width = <8>; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x12e>; + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupts-extended = <&gpio1 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irq"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&omap4_pmx_core { + bt_pins: pinmux-bt-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */ + >; + }; + + gpio_keys_pins: pinmux-gpio-key-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */ + >; + }; + + i2c1_pins: pinmux-i2c1-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux-i2c3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux-i2c4-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ + >; + }; + + keypad_pins: pinmux-keypad-pins { + pinctrl-single,pins = < + /* kpd_row0 */ + OMAP4_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE1) + /* kpd_row1 */ + OMAP4_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE1) + /* kpd_row2 */ + OMAP4_IOPAD(0x0054, PIN_INPUT_PULLUP | MUX_MODE1) + /* kpd_col0 */ + OMAP4_IOPAD(0x0058, PIN_OUTPUT | MUX_MODE1) + /* kpd_col1 */ + OMAP4_IOPAD(0x005a, PIN_OUTPUT | MUX_MODE1) + /* kpd_col2 */ + OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1) + >; + }; + + mcbsp2_pins: pinmux-mcbsp2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mpu9150h_pins: pinmux-mpu9150h-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x76, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + tlv320aic3x_pins: pinmux-tlv320aic3x-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x7e, PIN_OUTPUT | MUX_MODE3) + >; + }; + + uart2_pins: pinmux-uart2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux-uart3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + usb_otg_hs_pins: pinmux-usb-otg-hs-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */ + >; + }; + + wl12xx_pins: pinmux-wl12xx-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1c6, PIN_INPUT | MUX_MODE3) /* gpio_23 / IRQ */ + OMAP4_IOPAD(0x16c, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat2 */ + OMAP4_IOPAD(0x16e, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat1 */ + OMAP4_IOPAD(0x170, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat0 */ + OMAP4_IOPAD(0x172, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat3 */ + OMAP4_IOPAD(0x174, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_cmd */ + OMAP4_IOPAD(0x176, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_clk */ + >; + }; + + wl12xx_gpio: pinmux-wl12xx-gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE3) /* gpio_24 / WLAN_EN */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins &bt_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; + + /* + * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic + * which does not have a driver + */ +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_hs_pins>; + + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&usbhshost { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index e59d17b25a1d..c6b79ba8bbc9 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -35,42 +35,42 @@ &omap4_pmx_core { pinctrl-names = "default"; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0 */ OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat1 */ @@ -85,7 +85,7 @@ >; }; - usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + usb_otg_hs_pins: usb-otg-hs-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi index 915a9b31a33b..03ade47431fb 100644 --- a/arch/arm/boot/dts/omap4-mcpdm.dtsi +++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi @@ -7,7 +7,7 @@ */ &omap4_pmx_core { - mcpdm_pins: pinmux_mcpdm_pins { + mcpdm_pins: mcpdm-pins { pinctrl-single,pins = < /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 0269424350aa..f528511c2537 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -237,14 +237,14 @@ &hsusbb1_pins >; - twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -253,7 +253,7 @@ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ @@ -288,13 +288,13 @@ >; }; - tfp410_pins: pinmux_tfp410_pins { + tfp410_pins: tfp410-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -302,7 +302,7 @@ >; }; - tpd12s015_pins: pinmux_tpd12s015_pins { + tpd12s015_pins: tpd12s015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ @@ -310,7 +310,7 @@ >; }; - hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -327,28 +327,28 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ @@ -359,7 +359,7 @@ * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP * REVISIT: Are the pull-ups needed for GPIO 48 and 49? */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ @@ -369,7 +369,7 @@ }; /* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { + wl12xx_pins: wl12xx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ @@ -382,7 +382,7 @@ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ >; @@ -390,7 +390,7 @@ }; &omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { + led_wkgpio_pins: leds-wkpins-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 7631029e4d7a..fe7b156d10ed 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -38,26 +38,26 @@ }; &omap4_pmx_core { - led_gpio_pins: gpio_led_pmx { + led_gpio_pins: gpio-led-pmx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; - button_pins: pinmux_button_pins { + button_pins: button-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ >; }; - bt_pins: pinmux_bt_pins { + bt_pins: bt-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ >; }; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 9e976140f34a..b2cb93edbc3a 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -214,7 +214,7 @@ &tpd12s015_pins >; - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ @@ -223,7 +223,7 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ @@ -232,21 +232,21 @@ >; }; - uart4_pins: pinmux_uart4_pins { + uart4_pins: uart4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ >; }; - twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; - dmic_pins: pinmux_dmic_pins { + dmic_pins: dmic-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ @@ -255,7 +255,7 @@ >; }; - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ @@ -264,7 +264,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ @@ -273,7 +273,7 @@ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ @@ -282,7 +282,7 @@ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -290,7 +290,7 @@ >; }; - tpd12s015_pins: pinmux_tpd12s015_pins { + tpd12s015_pins: tpd12s015-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ @@ -298,28 +298,28 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ @@ -327,14 +327,14 @@ }; /* wl12xx GPIO output for WLAN_EN */ - wl12xx_gpio: pinmux_wl12xx_gpio { + wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ >; }; /* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { + wl12xx_pins: wl12xx-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ @@ -347,13 +347,13 @@ }; /* gpio_48 for ENET_ENABLE */ - enet_enable_gpio: pinmux_enet_enable_gpio { + enet_enable_gpio: enet-enable-gpio-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ >; }; - ks8851_pins: pinmux_ks8851_pins { + ks8851_pins: ks8851-pins { pinctrl-single,pins = < /* ENET_INT */ OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 458cb53dd3d1..cadc7e02592b 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -60,7 +60,7 @@ }; &omap4_pmx_core { - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ @@ -69,7 +69,7 @@ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ @@ -78,13 +78,13 @@ >; }; - mcasp_pins: pinmux_mcsasp_pins { + mcasp_pins: mcsasp-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ @@ -117,7 +117,7 @@ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ @@ -125,14 +125,14 @@ >; }; - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; - mmc5_pins: pinmux_mmc5_pins { + mmc5_pins: mmc5-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ @@ -144,32 +144,32 @@ >; }; - gpio_led_pins: pinmux_gpio_led_pins { + gpio_led_pins: gpio-led-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ >; }; - gpio_key_pins: pinmux_gpio_key_pins { + gpio_key_pins: gpio-key-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ >; }; - ks8851_irq_pins: pinmux_ks8851_irq_pins { + ks8851_irq_pins: ks8851-irq-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ >; }; - hdmi_hpd_pins: pinmux_hdmi_hpd_pins { + hdmi_hpd_pins: hdmi-hpd-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ >; }; - backlight_pins: pinmux_backlight_pins { + backlight_pins: backlight-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index d0032213101e..de779d2d7c3e 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -19,7 +19,7 @@ }; &omap4_pmx_core { - uart2_pins: pinmux_uart2_pins { + uart2_pins: uart2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ @@ -28,7 +28,7 @@ >; }; - wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { + wl12xx_ctrl_pins: wl12xx-ctrl-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ @@ -36,7 +36,7 @@ >; }; - mmc4_pins: pinmux_mmc4_pins { + mmc4_pins: mmc4-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 334cbbaa5b8b..37d56b3010cf 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -65,21 +65,21 @@ &hsusbb1_pins >; - twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; - tsc2004_pins: pinmux_tsc2004_pins { + tsc2004_pins: tsc2004-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ @@ -88,7 +88,7 @@ >; }; - hsusbb1_pins: pinmux_hsusbb1_pins { + hsusbb1_pins: hsusbb1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ @@ -105,27 +105,27 @@ >; }; - hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins { + hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -144,19 +144,19 @@ &lan7500_rst_pins >; - hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins { + hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ >; }; - hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins { + hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ >; }; - lan7500_rst_pins: pinmux_lan7500_rst_pins { + lan7500_rst_pins: lan7500-rst-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 373984c130e0..6f46f1ecf1e5 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -56,7 +56,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ clocks = <&auxclk1_ck>; @@ -156,13 +156,13 @@ &led_gpio_pins >; - twl6040_pins: pinmux_twl6040_pins { + twl6040_pins: twl6040-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ >; }; - mcpdm_pins: pinmux_mcpdm_pins { + mcpdm_pins: mcpdm-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ @@ -172,7 +172,7 @@ >; }; - mcbsp1_pins: pinmux_mcbsp1_pins { + mcbsp1_pins: mcbsp1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ @@ -181,7 +181,7 @@ >; }; - mcbsp2_pins: pinmux_mcbsp2_pins { + mcbsp2_pins: mcbsp2-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ @@ -190,14 +190,14 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; - mcspi2_pins: pinmux_mcspi2_pins { + mcspi2_pins: mcspi2-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ @@ -206,7 +206,7 @@ >; }; - mcspi3_pins: pinmux_mcspi3_pins { + mcspi3_pins: mcspi3-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ @@ -215,7 +215,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ @@ -226,20 +226,20 @@ >; }; - wlan_pins: pinmux_wlan_pins { + wlan_pins: wlan-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ >; }; /* TI trees use GPIO mode; msecure mode does not work reliably? */ - palmas_msecure_pins: palmas_msecure_pins { + palmas_msecure_pins: palmas-msecure-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ >; }; - usbhost_pins: pinmux_usbhost_pins { + usbhost_pins: usbhost-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ @@ -252,13 +252,13 @@ >; }; - led_gpio_pins: pinmux_led_gpio_pins { + led_gpio_pins: led-gpio-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: uart1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ @@ -267,14 +267,14 @@ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ >; }; - uart5_pins: pinmux_uart5_pins { + uart5_pins: uart5-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ @@ -283,7 +283,7 @@ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ @@ -291,7 +291,7 @@ >; }; - tpd12s015_pins: pinmux_tpd12s015_pins { + tpd12s015_pins: tpd12s015-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ >; @@ -304,20 +304,20 @@ &usbhost_wkup_pins >; - palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + palmas_sys_nirq_pins: palmas-sys-nirq-pins { pinctrl-single,pins = < /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) >; }; - usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + usbhost_wkup_pins: usbhost-wkup-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ >; }; - wlcore_irq_pin: pinmux_wlcore_irq_pin { + wlcore_irq_pin: wlcore-irq-pin-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 2d87b9fc230e..abe0b389ad76 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -60,7 +60,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ #phy-cells = <0>; @@ -176,13 +176,13 @@ &omap5_pmx_wkup { - ads7846_pins: pinmux_ads7846_pins { + ads7846_pins: ads7846-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ >; }; - palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + palmas_sys_nirq_pins: palmas-sys-nirq-pins { pinctrl-single,pins = < /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) @@ -197,27 +197,27 @@ &usbhost_pins >; - led_gpio_pins: pinmux_led_gpio_pins { + led_gpio_pins: led-gpio-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */ >; }; - i2c1_pins: pinmux_i2c1_pins { + i2c1_pins: i2c1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */ OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */ >; }; - i2c2_pins: pinmux_i2c2_pins { + i2c2_pins: i2c2-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */ @@ -228,7 +228,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */ @@ -243,7 +243,7 @@ >; }; - mmc3_pins: pinmux_mmc3_pins { + mmc3_pins: mmc3-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ @@ -254,14 +254,14 @@ >; }; - wlan_gpios_pins: pinmux_wlan_gpios_pins { + wlan_gpios_pins: wlan-gpios-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */ OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */ >; }; - usbhost_pins: pinmux_usbhost_pins { + usbhost_pins: usbhost-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ @@ -274,7 +274,7 @@ >; }; - dss_hdmi_pins: pinmux_dss_hdmi_pins { + dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */ OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */ @@ -282,19 +282,19 @@ >; }; - lcd_pins: pinmux_lcd_pins { + lcd_pins: lcd-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */ >; }; - hdmi_conn_pins: pinmux_hdmi_conn_pins { + hdmi_conn_pins: hdmi-conn-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ >; }; - dss_dpi_pins: pinmux_dss_dpi_pins { + dss_dpi_pins: dss-dpi-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */ OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */ @@ -327,7 +327,7 @@ >; }; - mcspi2_pins: pinmux_mcspi1_pins { + mcspi2_pins: mcspi1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 3851120857d7..d4ca2e3a14dd 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -85,14 +85,14 @@ }; &omap5_pmx_core { - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ >; }; - power_button_pin: pinctrl_power_button_pin { + power_button_pin: power-button-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6) /* gpio4_118 */ >; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index 657df46251c2..02716fb796bd 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -11,14 +11,14 @@ }; &omap5_pmx_core { - i2c4_pins: pinmux_i2c4_pins { + i2c4_pins: i2c4-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; - mmc1_aux_pins: pinmux_mmc1_aux_pins { + mmc1_aux_pins: mmc1-aux-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */ OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */ diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 453da9f18a99..933de05d3ca1 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -162,20 +162,20 @@ }; &omap5_pmx_core { - evm_keys_pins: pinmux_evm_keys_gpio_pins { + evm_keys_pins: evm-keys-gpio-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */ >; }; - i2c5_pins: pinmux_i2c5_pins { + i2c5_pins: i2c5-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */ >; diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts index d64096028ab1..eb73b992a696 100644 --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -7,6 +7,7 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +#include <dt-bindings/input/ti-drv260x.h> /delete-node/ &adsp_region; @@ -68,6 +69,26 @@ status = "okay"; }; +&blsp1_i2c2 { + clock-frequency = <384000>; + + status = "okay"; + + vibrator@5a { + compatible = "ti,drv2605"; + reg = <0x5a>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + + mode = <DRV260X_ERM_MODE>; + library-sel = <DRV260X_ERM_LIB_D>; + vib-rated-mv = <2765>; + vib-overdrive-mv = <3525>; + + pinctrl-0 = <&vibrator_default_state>; + pinctrl-names = "default"; + }; +}; + &blsp1_i2c5 { clock-frequency = <384000>; @@ -347,6 +368,13 @@ }; }; + vibrator_default_state: vibrator-default-state { + pins = "gpio59", "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + wlan_hostwake_default_state: wlan-hostwake-default-state { pins = "gpio66"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 8e4b61e4d4b1..db4c791b2e2f 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -18,50 +18,46 @@ stdout-path = "serial0:115200n8"; }; - regulators { - compatible = "simple-bus"; - - /* Main power of the board: 3.7V */ - vph: regulator-fixed { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-name = "VPH"; - regulator-type = "voltage"; - regulator-always-on; - regulator-boot-on; - }; - - /* GPIO controlled ethernet power regulator */ - dragon_veth: xc622a331mrg { - compatible = "regulator-fixed"; - regulator-name = "XC6222A331MR-G"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vph>; - gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_veth_gpios>; - regulator-always-on; - }; + /* Main power of the board: 3.7V */ + vph: regulator-fixed { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-always-on; + regulator-boot-on; + }; + + /* GPIO controlled ethernet power regulator */ + dragon_veth: xc622a331mrg { + compatible = "regulator-fixed"; + regulator-name = "XC6222A331MR-G"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vph>; + gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_veth_gpios>; + regulator-always-on; + }; - /* VDDvario fixed regulator */ - dragon_vario: nds332p { - compatible = "regulator-fixed"; - regulator-name = "NDS332P"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&pm8058_s3>; - }; + /* VDDvario fixed regulator */ + dragon_vario: nds332p { + compatible = "regulator-fixed"; + regulator-name = "NDS332P"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pm8058_s3>; + }; - /* This is a levelshifter for SDCC5 */ - dragon_vio_txb: txb0104rgyr { - compatible = "regulator-fixed"; - regulator-name = "Dragon SDCC levelshifter"; - vin-supply = <&pm8058_l14>; - regulator-always-on; - }; + /* This is a levelshifter for SDCC5 */ + dragon_vio_txb: txb0104rgyr { + compatible = "regulator-fixed"; + regulator-name = "Dragon SDCC levelshifter"; + vin-supply = <&pm8058_l14>; + regulator-always-on; }; /* @@ -451,7 +447,7 @@ * PM8901 supplies "preliminary regulators" whatever * that means */ - pm8901-regulators { + regulators-0 { vdd_l0-supply = <&pm8901_s4>; vdd_l1-supply = <&vph>; vdd_l2-supply = <&vph>; @@ -537,7 +533,7 @@ }; - pm8058-regulators { + regulators-1 { vdd_l0_l1_lvs-supply = <&pm8058_s3>; vdd_l2_l11_l12-supply = <&vph>; vdd_l3_l4_l5-supply = <&vph>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 1345df7cbd00..72f7e09a5bbf 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -4,6 +4,8 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" +/delete-node/ &mpss_region; + / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; @@ -17,12 +19,23 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + mpss_region: mpss@ac00000 { + reg = <0x0ac00000 0x2500000>; + no-map; + }; + }; }; &blsp1_uart2 { status = "okay"; }; +&blsp2_dma { + qcom,controlled-remotely; +}; + &blsp2_i2c5 { status = "okay"; clock-frequency = <200000>; @@ -35,6 +48,76 @@ }; }; +&dsi0 { + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_l22>; + vddio-supply = <&pm8941_l12>; + + status = "okay"; + + panel: panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pm8941_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8941_wled { + qcom,cs-out; + qcom,switching-freq = <3200>; + qcom,ovp = <32>; + qcom,num-strings = <1>; + + status = "okay"; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + + firmware-name = "qcom/apq8074/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + + firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index b653ea40c441..207124d68128 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -506,7 +506,7 @@ }; }; - tsens: thermal-sensor@fc4a8000 { + tsens: thermal-sensor@fc4a9000 { compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; reg = <0xfc4a9000 0x1000>, /* TM */ <0xfc4a8000 0x1000>; /* SROT */ diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index 79b0c6318e52..0993f840d1fc 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -11,9 +11,9 @@ dma-controller@7984000 { status = "okay"; }; - - qpic-nand@79b0000 { - status = "okay"; - }; }; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index a63b3778636d..468ebc40d2ad 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -102,10 +102,10 @@ status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; - - qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - }; }; }; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 0107f552f520..7ef635997efa 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -65,11 +65,11 @@ dma-controller@7984000 { status = "okay"; }; - - qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; }; }; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index 4d509876294b..104eb729c2d6 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -323,7 +323,7 @@ pinctrl-0 = <&leds_pins>; pinctrl-names = "default"; - led@7 { + led-0 { label = "rb3011:green:user"; color = <LED_COLOR_ID_GREEN>; gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index 411c8d63c38e..c5abe7151f14 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -92,34 +92,34 @@ pinctrl-0 = <&leds_pins>; pinctrl-names = "default"; - led@7 { + led-0 { label = "led_usb1"; gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "usbdev"; default-state = "off"; }; - led@8 { + led-1 { label = "led_usb3"; gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "usbdev"; default-state = "off"; }; - led@9 { + led-2 { label = "status_led_fail"; function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@26 { + led-3 { label = "sata_led"; gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@53 { + led-4 { label = "status_led_pass"; function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index af6764770fd1..5ef5026fb7bc 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -520,7 +520,7 @@ #reset-cells = <1>; #power-domain-cells = <1>; - tsens: thermal-sensor@900000 { + tsens: thermal-sensor { compatible = "qcom,ipq8064-tsens"; nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; @@ -606,12 +606,12 @@ regulator; }; - nss_common: syscon@03000000 { + nss_common: syscon@3000000 { compatible = "syscon"; reg = <0x03000000 0x0000FFFF>; }; - usb3_0: usb3@100f8800 { + usb3_0: usb@100f8800 { compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; #address-cells = <1>; #size-cells = <1>; @@ -626,7 +626,7 @@ status = "disabled"; - dwc3_0: dwc3@10000000 { + dwc3_0: usb@10000000 { compatible = "snps,dwc3"; reg = <0x10000000 0xcd00>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; @@ -657,7 +657,7 @@ status = "disabled"; }; - usb3_1: usb3@110f8800 { + usb3_1: usb@110f8800 { compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; #address-cells = <1>; #size-cells = <1>; @@ -672,7 +672,7 @@ status = "disabled"; - dwc3_1: dwc3@11000000 { + dwc3_1: usb@11000000 { compatible = "snps,dwc3"; reg = <0x11000000 0xcd00>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 42acb9ddb8cc..a3a9162e9c28 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -47,6 +47,12 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -592,6 +598,11 @@ }; }; + sram@fc190000 { + compatible = "qcom,msm8226-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; @@ -636,6 +647,20 @@ label = "lpass"; }; }; + + sram@fe805000 { + compatible = "qcom,msm8226-imem", "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + + mode-bootloader = <0x77665500>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; + }; + }; }; timer { diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8fa2befa629a..6c1bc3818883 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -15,16 +15,12 @@ stdout-path = "serial0:115200n8"; }; - regulators { - compatible = "simple-bus"; - - ext_l2: gpio-regulator { - compatible = "regulator-fixed"; - regulator-name = "ext_l2"; - gpio = <&msmgpio 91 0>; - startup-delay-us = <10000>; - enable-active-high; - }; + ext_l2: gpio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ext_l2"; + gpio = <&msmgpio 91 0>; + startup-delay-us = <10000>; + enable-active-high; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..fea8a6be9021 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -41,6 +41,25 @@ }; }; + clk_pwm: pwm { + compatible = "clk-pwm"; + clocks = <&mmcc CAMSS_GP1_CLK>; + + pinctrl-0 = <&vibrator_pin>; + pinctrl-names = "default"; + + #pwm-cells = <2>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <&pm8941_l19>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -637,6 +656,22 @@ function = "gpio"; }; }; + + vibrator_pin: vibrator-state { + core-pins { + pins = "gpio27"; + function = "gp1_clk"; + drive-strength = <6>; + bias-disable; + }; + + enable-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; &usb { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8208012684d4..7dcbe0810e34 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -300,7 +300,7 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests: rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; @@ -675,7 +675,7 @@ #reset-cells = <1>; ulpi { - usb_hs1_phy: phy@a { + usb_hs1_phy: phy-0 { compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; #phy-cells = <0>; @@ -686,7 +686,7 @@ status = "disabled"; }; - usb_hs2_phy: phy@b { + usb_hs2_phy: phy-1 { compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; #phy-cells = <0>; @@ -706,7 +706,7 @@ clock-names = "core"; }; - pronto: remoteproc@fb21b000 { + pronto: remoteproc@fb204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -745,7 +745,7 @@ qcom,mmio = <&pronto>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 342c3d14001e..06c2646dd673 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -515,7 +515,7 @@ #hwlock-cells = <1>; }; - tcsr: syscon@1fcb000 { + tcsr: syscon@1fc0000 { compatible = "qcom,sdx55-tcsr", "syscon"; reg = <0x01fc0000 0x1000>; }; @@ -792,7 +792,7 @@ }; }; - apps_rsc: rsc@17840000 { + apps_rsc: rsc@17830000 { compatible = "qcom,rpmh-rsc"; reg = <0x17830000 0x10000>, <0x17840000 0x10000>; reg-names = "drv-0", "drv-1"; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 57bc3b03d3aa..02d8d6e241ae 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -250,6 +250,25 @@ status = "okay"; }; +&pcie_ep { + pinctrl-0 = <&pcie_ep_clkreq_default + &pcie_ep_perst_default + &pcie_ep_wake_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l1b_1p2>; + vdda-pll-supply = <&vreg_l4b_0p88>; + + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -274,6 +293,29 @@ status = "okay"; }; +&tlmm { + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-disable; + }; + + pcie_ep_perst_default: pcie-ep-perst-default-state { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + pcie_ep_wake_default: pcie-ep-wake-default-state { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + &usb { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 525dd8a1f664..1a3583029a64 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx65.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -295,12 +296,98 @@ status = "disabled"; }; + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xa8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", "doorbell"; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c06000 { + compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy"; + reg = <0x01c06000 0x2000>; + + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>, + <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; #hwlock-cells = <1>; }; + tcsr: syscon@1fcb000 { + compatible = "qcom,sdx65-tcsr", "syscon"; + reg = <0x01fc0000 0x1000>; + }; + ipa: ipa@3f40000 { compatible = "qcom,sdx65-ipa"; diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi index 8c28e8a0c824..7cc785a63866 100644 --- a/arch/arm/boot/dts/s3c6400.dtsi +++ b/arch/arm/boot/dts/s3c6400.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> * * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi index a766d6de696c..13e9cc69b8a8 100644 --- a/arch/arm/boot/dts/s3c6410.dtsi +++ b/arch/arm/boot/dts/s3c6410.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> * * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index c03df6355500..0b59135ffe88 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -6,7 +6,7 @@ * * Samsung's S3C64xx SoC series device nodes are listed in this file. * Particular SoCs from S3C64xx series can include this file and provide - * values for SoCs specfic bindings. + * values for SoCs specific bindings. * * Note: This file does not include device nodes for all the controllers in * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 6d6daef9fb7a..af740abd9e0f 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -1,25 +1,21 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Samsung's S5PV210 SoC device tree source + * Samsung's S5PV210 SoC device tree source - pin control-related + * definitions * * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. * * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> * Tomasz Figa <t.figa@samsung.com> * - * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional - * nodes can be added to this file. + * Samsung's S5PV210 SoC pin banks, pin-mux and pin-config options are + * listed as device tree nodes in this file. */ #include "s5pv210-pinctrl.h" #define PIN_SLP(_pin, _mode, _pull) \ - _pin { \ + pin- ## _pin { \ samsung,pins = #_pin; \ samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>; \ samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>; \ diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index fbae768d65e2..6e26c67e0a26 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -55,6 +55,14 @@ default-brightness-level = <6>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_out>; + power-supply = <&dc5v_reg>; + }; + + dc5v_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "DC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 1a9e4a96b2ff..f7de5b5f2f38 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -8,7 +8,7 @@ * Tomasz Figa <t.figa@samsung.com> * * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -401,7 +401,7 @@ status = "disabled"; }; - hsotg: hsotg@ec000000 { + hsotg: usb@ec000000 { compatible = "samsung,s3c6400-hsotg"; reg = <0xec000000 0x20000>; interrupt-parent = <&vic1>; @@ -452,8 +452,8 @@ reg = <0xf1700000 0x10000>; interrupt-parent = <&vic2>; interrupts = <14>; - clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; - clock-names = "sclk_mfc", "mfc"; + clocks = <&clocks CLK_MFC>, <&clocks DOUT_MFC>; + clock-names = "mfc", "sclk_mfc"; }; vic0: interrupt-controller@f2000000 { @@ -547,10 +547,8 @@ status = "disabled"; }; - camera: camera { - compatible = "samsung,fimc", "simple-bus"; - pinctrl-names = "default"; - pinctrl-0 = <>; + camera: camera@fa600000 { + compatible = "samsung,fimc"; clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; clock-names = "sclk_cam0", "sclk_cam1"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index e67ede940071..c8bedfa987e5 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -1282,7 +1282,7 @@ }; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "microchip,sam9x60-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1322,7 +1322,7 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; - clk32k: sckc@fffffe50 { + clk32k: clock-controller@fffffe50 { compatible = "microchip,sam9x60-sckc"; reg = <0xfffffe50 0x4>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 14c35c12a115..7b6471655dee 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -284,7 +284,7 @@ clock-names = "dma_clk"; }; - pmc: pmc@f0014000 { + pmc: clock-controller@f0014000 { compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; @@ -704,10 +704,9 @@ status = "disabled"; }; - clk32k: sckc@f8048050 { + clk32k: clock-controller@f8048050 { compatible = "atmel,sama5d4-sckc"; reg = <0xf8048050 0x4>; - clocks = <&slow_xtal>; #clock-cells = <0>; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index bde8e92d60bb..0eebf6c760b3 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1001,7 +1001,7 @@ }; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1040,7 +1040,7 @@ status = "disabled"; }; - clk32k: sckc@fffffe50 { + clk32k: clock-controller@fffffe50 { compatible = "atmel,sama5d3-sckc"; reg = <0xfffffe50 0x4>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 45226108850d..5d7ce13de8cc 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -30,7 +30,7 @@ }; }; - pmc: pmc@fffffc00 { + pmc: clock-controller@fffffc00 { }; macb1: ethernet@f802c000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index af62157ae214..de6c82969232 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -250,7 +250,7 @@ clock-names = "dma_clk"; }; - pmc: pmc@f0018000 { + pmc: clock-controller@f0018000 { compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -761,7 +761,7 @@ status = "disabled"; }; - clk32k: sckc@fc068650 { + clk32k: clock-controller@fc068650 { compatible = "atmel,sama5d4-sckc"; reg = <0xfc068650 0x4>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 929ba73702e9..b55adb96a06e 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -241,7 +241,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; }; - pmc: pmc@e0018000 { + pmc: clock-controller@e0018000 { compatible = "microchip,sama7g5-pmc", "syscon"; reg = <0xe0018000 0x200>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index fead7afd5517..d5d88771ef97 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -110,6 +110,74 @@ interrupt-parent = <&intc>; ranges; + /* + * 640KB ESRAM (embedded static random access memory), divided + * into 5 banks of 128 KB each. This is a fast memory usually + * used by different accelerators. We group these according to + * their power domains: ESRAM0 (always on) ESRAM 1+2 and + * ESRAM 3+4. + */ + sram@40000000 { + /* The first (always on) ESRAM 0, 128 KB */ + compatible = "mmio-sram"; + reg = <0x40000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x20000>; + + sram@0 { + compatible = "stericsson,u8500-esram"; + reg = <0x0 0x10000>; + pool; + }; + lcpa: sram@10000 { + /* + * This eSRAM is used by the DMA40 DMA controller + * for Logical Channel Paramers (LCP), the address + * where these parameters are stored is called "LCPA". + * This is addressed directly by the driver so no + * pool is used. + */ + compatible = "stericsson,u8500-esram"; + label = "DMA40-LCPA"; + reg = <0x10000 0x800>; + }; + sram@10800 { + compatible = "stericsson,u8500-esram"; + reg = <0x10800 0xf800>; + pool; + }; + }; + sram@40020000 { + /* ESRAM 1+2, 256 KB */ + compatible = "mmio-sram"; + reg = <0x40020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x40000>; + }; + sram@40060000 { + /* ESRAM 3+4, 256 KB */ + compatible = "mmio-sram"; + reg = <0x40060000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40060000 0x40000>; + + lcla: sram@20000 { + /* + * This eSRAM is used by the DMA40 DMA controller + * for Logical Channel Logical Addresses (LCLA), the address + * where these parameters are stored is called "LCLA". + * This is addressed directly by the driver so no + * pool is used. + */ + compatible = "stericsson,u8500-esram"; + label = "DMA40-LCLA"; + reg = <0x20000 0x2000>; + }; + }; + ptm@801ae000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x801ae000 0x1000>; @@ -536,9 +604,10 @@ dma: dma-controller@801C0000 { compatible = "stericsson,db8500-dma40", "stericsson,dma40"; - reg = <0x801C0000 0x1000 0x40010000 0x800>; - reg-names = "base", "lcpa"; + reg = <0x801C0000 0x1000>; + reg-names = "base"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + sram = <&lcpa>, <&lcla>; #dma-cells = <3>; memcpy-channels = <56 57 58 59 60>; @@ -852,7 +921,7 @@ status = "disabled"; }; - serial0: uart@80120000 { + serial0: serial@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -868,7 +937,7 @@ status = "disabled"; }; - serial1: uart@80121000 { + serial1: serial@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -884,7 +953,7 @@ status = "disabled"; }; - serial2: uart@80007000 { + serial2: serial@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 9fa024900d53..e1de9d389a01 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -418,6 +418,24 @@ }; }; }; + /* + * Charging is not working on the HREF unless an actual battery is + * mounted, most HREFs have a DC cable in to the "battery power" + * which means this will only be cofusing. So do not enable charging + * of the HREFs. + */ + ab8500_fg { + status = "disabled"; + }; + ab8500_btemp { + status = "disabled"; + }; + ab8500_charger { + status = "disabled"; + }; + ab8500_chargalg { + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index e32d0c36feb8..79c2be36acae 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -30,12 +30,11 @@ soc { i2c@80004000 { - stmpe1601: stmpe1601@40 { + stmpe1601: port-expander@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio6>; - interrupt-controller; vcc-supply = <&db8500_vsmps2_reg>; vio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; @@ -44,7 +43,7 @@ wakeup-source; st,autosleep-timeout = <1024>; - stmpe_keypad { + keyboard-controller { compatible = "st,stmpe-keypad"; debounce-interval = <64>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index e716121a78ce..13b11dbeba1c 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -45,7 +45,7 @@ }; soc { - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -53,13 +53,13 @@ }; /* This UART is unused and thus left disabled */ - uart@80121000 { + serial@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; }; - uart@80007000 { + serial@80007000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; pinctrl-1 = <&u2rxtx_c_1_sleep>; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 29b67abfc461..9859ee91a15e 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -17,7 +17,7 @@ soc { /* Enable UART1 on this board */ - uart@80121000 { + serial@80121000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 4d741adc16cd..cdff33063d6f 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -99,17 +99,16 @@ pinctrl-names = "default"; reg = <0x1d>; }; - stmpe0: stmpe2401@43 { + stmpe0: port-expander@43 { compatible = "st,stmpe2401"; reg = <0x43>; reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77 interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76 interrupt-parent = <&gpio2>; - interrupt-controller; wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&stmpe2401_1_nhk_mode>; - stmpe_gpio43: stmpe_gpio { + stmpe_gpio43: gpio { compatible = "st,stmpe-gpio"; gpio-controller; #gpio-cells = <2>; @@ -118,7 +117,7 @@ /* Some pins in alternate functions */ st,norequest-mask = <0xf0f002>; }; - stmpe_keypad { + keyboard-controller { compatible = "st,stmpe-keypad"; debounce-interval = <64>; st,scan-count = <8>; @@ -140,22 +139,21 @@ 0x03020067 // Up 0x0303006c>; // Down }; - stmpe0_pwm: stmpe_pwm { + stmpe0_pwm: pwm { compatible = "st,stmpe-pwm"; #pwm-cells = <2>; }; }; - stmpe1: stmpe2401@44 { + stmpe1: port-expander@44 { compatible = "st,stmpe2401"; reg = <0x44>; reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79 interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78 interrupt-parent = <&gpio2>; - interrupt-controller; wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&stmpe2401_2_nhk_mode>; - stmpe_gpio44: stmpe_gpio { + stmpe_gpio44: gpio { compatible = "st,stmpe-gpio"; gpio-controller; #gpio-cells = <2>; @@ -165,7 +163,7 @@ * This will turn off SATA so that MMC/SD * can thrive */ - mmcsd-gpio { + mmcsd-hog { gpio-hog; gpios = <2 0x0>; output-low; @@ -190,7 +188,7 @@ }; /* Activate RX/TX and CTS/RTS on UART 0 */ - uart0: uart@101fd000 { + uart0: serial@101fd000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_nhk_mode>; status = "okay"; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index f16314ffbf4b..c905c2643a12 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -133,7 +133,7 @@ amba { /* Activate RXTX on UART 0 */ - uart0: uart@101fd000 { + uart0: serial@101fd000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_s8815_mode>; status = "okay"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 1815361fe73c..6816eef39d45 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -769,7 +769,7 @@ reg = <0x10140020 0x20>; }; - uart0: uart@101fd000 { + uart0: serial@101fd000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101fd000 0x1000>; interrupt-parent = <&vica>; @@ -782,7 +782,7 @@ dma-names = "rx", "tx"; }; - uart1: uart@101fb000 { + uart1: serial@101fb000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101fb000 0x1000>; interrupt-parent = <&vica>; @@ -796,7 +796,7 @@ dma-names = "rx", "tx"; }; - uart2: uart@101f2000 { + uart2: serial@101f2000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f2000 0x1000>; interrupt-parent = <&vica>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index e2f0cdacba7d..9a3d6546399d 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -308,7 +308,7 @@ status = "okay"; }; - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -316,13 +316,13 @@ }; /* This UART is unused and thus left disabled */ - uart@80121000 { + serial@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; }; - uart@80007000 { + serial@80007000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; pinctrl-1 = <&u2rxtx_c_1_sleep>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts index e036393d5415..463942ae755e 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -369,7 +369,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -393,7 +393,7 @@ }; /* GPS UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; /* CTS/RTS is not used, CTS is repurposed as GPIO */ @@ -403,7 +403,7 @@ }; /* Debugging console UART connected to AB8505 */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 1a6d24a7ccb8..c1ae0e23fe45 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -462,7 +462,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -485,7 +485,7 @@ }; /* GPS UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; @@ -505,7 +505,7 @@ }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index 5b445fa4c8c0..b21e40da3dfd 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -417,7 +417,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -439,7 +439,7 @@ }; /* GPS UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; /* CTS/RTS is not used, CTS is repurposed as GPIO */ @@ -449,7 +449,7 @@ }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 9604695edf53..f736888474e7 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -186,7 +186,7 @@ }; /* BT UART */ - uart@80120000 { + serial@80120000 { status = "okay"; pinctrl-names = "default", "sleep"; @@ -209,7 +209,7 @@ }; /* GPF UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; @@ -218,7 +218,7 @@ }; /* Debugging console UART */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index e901cb76b899..6e586e875565 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -467,7 +467,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -491,7 +491,7 @@ }; /* GPS UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; /* CTS/RTS is not used, CTS is repurposed as GPIO */ @@ -520,7 +520,7 @@ }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 45fab5283a9d..ba4421080b2a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -292,7 +292,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -310,7 +310,7 @@ }; /* GPF UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; @@ -333,7 +333,7 @@ }; /* Debugging console UART connected to AB8505 USB */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 93e5f5ed888d..064d6fee8821 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -271,7 +271,7 @@ }; /* GBF (Bluetooth) UART */ - uart@80120000 { + serial@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&u0_a_1_default>; pinctrl-1 = <&u0_a_1_sleep>; @@ -290,7 +290,7 @@ }; /* GPS UART */ - uart@80121000 { + serial@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; @@ -313,7 +313,7 @@ }; /* Debugging console UART connected to AB8505 USB */ - uart@80007000 { + serial@80007000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u2rxtx_c_1_default>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index c9e05e3540d6..00bf53f99c29 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -387,6 +387,7 @@ interrupt-names = "tx", "rx0", "rx1", "sce"; resets = <&rcc STM32F4_APB1_RESET(CAN2)>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>; + st,can-secondary; st,gcan = <&gcan>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 5a0daf8e8b11..cbbd521bf010 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -160,7 +160,7 @@ }; }; - panel-dsi@0 { + panel@0 { compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; @@ -179,7 +179,7 @@ status = "okay"; port { - ltdc_out_dsi: endpoint@0 { + ltdc_out_dsi: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index c8e6c52fb248..9f65403295ca 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -283,6 +283,88 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index dc868e6da40e..e3564b74a779 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -515,7 +515,7 @@ crc: crc@40023000 { compatible = "st,stm32f7-crc"; reg = <0x40023000 0x400>; - clocks = <&rcc 0 12>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(CRC)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts index f3e70d3b65ac..44c307f8b09c 100644 --- a/arch/arm/boot/dts/stm32h750i-art-pi.dts +++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts @@ -208,7 +208,7 @@ dmas = <&dmamux1 45 0x400 0x05>, <&dmamux1 46 0x400 0x05>; dma-names = "rx", "tx"; - st,hw-flow-ctrl; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index e86d989dd351..06e969aa5fdb 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -341,6 +341,56 @@ }; }; + ethernet0_rgmii_pins_d: rgmii-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + ethernet0_rmii_pins_a: rmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ @@ -1441,6 +1491,30 @@ }; }; + sai2b_pins_d: sai2b-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */ + <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_d: sai2b-sleep-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('H', 3, ANALOG)>, /* SAI2_MCLK_B */ + <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + sai4a_pins_a: sai4a-0 { pins { pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ @@ -1522,6 +1596,60 @@ }; }; + sdmmc1_b4_pins_b: sdmmc1-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + sdmmc1_dir_pins_a: sdmmc1-dir-0 { pins1 { pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ @@ -1759,6 +1887,27 @@ }; }; + sdmmc2_d47_pins_e: sdmmc2-d47-4 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_e: sdmmc2-d47-sleep-4 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ @@ -2124,6 +2273,33 @@ }; }; + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */ + bias-disable; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */ + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 11, ANALOG)>; /* USART1_CTS_NSS */ + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ @@ -2226,6 +2402,23 @@ }; }; + usart3_idle_pins_a: usart3-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_a: usart3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */ + }; + }; + usart3_pins_b: usart3-1 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ @@ -2463,4 +2656,42 @@ bias-disable; }; }; + + spi1_sleep_pins_a: spi1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */ + <STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */ + }; + }; + + usart1_pins_b: usart1-1 { + pins1 { + pinmux = <STM32_PINMUX('Z', 7, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('Z', 7, ANALOG)>; /* USART1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('Z', 7, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('Z', 6, ANALOG)>; /* USART1_RX */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 63f4c78fcc1d..61508917521c 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1093,6 +1093,8 @@ adc1: adc@0 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x0>; interrupt-parent = <&adc>; interrupts = <0>; @@ -1104,12 +1106,24 @@ adc2: adc@100 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x100>; interrupt-parent = <&adc>; interrupts = <1>; dmas = <&dmamux1 10 0x400 0x01>; dma-names = "rx"; + nvmem-cells = <&vrefint>; + nvmem-cell-names = "vrefint"; status = "disabled"; + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; }; }; @@ -1529,11 +1543,6 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - }; }; iwdg2: watchdog@5a002000 { @@ -1620,6 +1629,12 @@ reg = <0x5c005000 0x400>; #address-cells = <1>; #size-cells = <1>; + part_number_otp: part-number-otp@4 { + reg = <0x4 0x1>; + }; + vrefint: vrefin-cal@52 { + reg = <0x52 0x2>; + }; ts_cal1: calib@5c { reg = <0x5c 0x2>; }; @@ -1820,8 +1835,8 @@ <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi index 54e73ccea446..5e733cd16ff9 100644 --- a/arch/arm/boot/dts/stm32mp157.dtsi +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -24,14 +24,7 @@ clock-names = "pclk", "ref", "px_clk"; resets = <&rcc DSI_R>; reset-names = "apb"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts index e539cc80bef8..afcd6285890c 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -55,8 +55,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts index 9a2a4bc7d079..4279b26547df 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -49,6 +49,9 @@ phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -104,8 +107,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts index 390ee8c05754..efba54289820 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -49,6 +49,9 @@ phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in_ltdc: endpoint { @@ -104,8 +107,7 @@ status = "okay"; port { - ltdc_out_dsi: endpoint@0 { - reg = <0>; + ltdc_out_dsi: endpoint { remote-endpoint = <&dsi_in_ltdc>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index 0d7560ba2950..5116a7785201 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -81,8 +81,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&panel_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 3a36f7fe0a2c..5f85598cc7c6 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -287,7 +287,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&usart2_pins_b>; pinctrl-1 = <&usart2_sleep_pins_b>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; @@ -297,7 +297,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_c>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts index 97e4f94b0a24..39358d902000 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -61,8 +61,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index ab13e340f4ef..4bef2300ed7c 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -31,10 +31,15 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -82,6 +87,9 @@ status = "okay"; port { + #address-cells = <1>; + #size-cells = <0>; + ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts index 9cf0a44d2f47..07ea765a4553 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -60,8 +60,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 8beb901be506..66ed5f9921ba 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -103,10 +103,20 @@ vref-supply = <&vdda>; status = "disabled"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-nsecs = <400>; status = "okay"; + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <400>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <400>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <400>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index b01470a9a3d5..94e38141af67 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -97,9 +97,11 @@ adc1: adc@0 { pinctrl-names = "default"; pinctrl-0 = <&adc1_in6_pins_a>; - st,min-sample-time-nsecs = <5000>; - st,adc-channels = <6>; status = "disabled"; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts index 3b9dd6f4ccc9..813086ec2489 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -66,8 +66,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index ba8e9d9a42fa..af3800501875 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -101,9 +101,14 @@ &dsi { phy-dsi-supply = <®18>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -119,7 +124,7 @@ }; }; - panel-dsi@0 { + panel@0 { compatible = "raydium,rm68200"; reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; @@ -185,7 +190,9 @@ reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; + AVDD-supply = <&v2v8>; DOVDD-supply = <&v2v8>; + DVDD-supply = <&v2v8>; powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; @@ -239,8 +246,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 407ed3952f75..eada9cf257be 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -161,8 +161,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&panel_input>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts new file mode 100644 index 000000000000..28d7203264ce --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@linrt.com>. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp157c-phycore-stm32mp15-som.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP1-3 Dev Board"; + compatible = "phytec,phycore-stm32mp1-3", + "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + mmc2 = &sdmmc3; + serial0 = &uart4; + serial1 = &usart3; + serial2 = &usart1; + }; +}; + +&cryp1 { + status = "okay"; +}; + +&dts { + status = "okay"; +}; + +&fmc { + status = "disabled"; +}; + +&gpu { + status = "okay"; +}; + +&i2c4_eeprom { + status = "okay"; +}; + +&i2c4_rtc { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&sdmmc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi new file mode 100644 index 000000000000..4e8b2d2b30c7 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -0,0 +1,577 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2023 Steffen Trumtrar <kernel@pengutronix.de> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@linrt.com>. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "stm32mp15-pinctrl.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP15 SOM"; + compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + rtc0 = &i2c4_rtc; + rtc1 = &rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-home { + label = "Home"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + key-enter { + label = "Enter"; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-PHYCORE"; + routing = + "Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */ + "Capture", "MCLK"; + dais = <&sai2b_port>, + <&sai2a_port>; + }; + + regulator_vin: regulator { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rgmii_pins_d>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_d>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-1 = <&i2c1_sleep_pins_b>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + + codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + + ai3x-micbias-vg = <2>; + + AVDD-supply = <&v3v3>; + IOVDD-supply = <&v3v3>; + DRVDD-supply = <&v3v3>; + DVDD-supply = <&v1v8_audio>; + + clocks = <&sai2b>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tlv320_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + + tlv320_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; + + touch@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + vio-supply = <&v3v3>; + vcc-supply = <&v3v3>; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + type = <PCA9532_TYPE_LED>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + buck1-supply = <®ulator_vin>; + buck2-supply = <®ulator_vin>; + buck3-supply = <®ulator_vin>; + buck4-supply = <®ulator_vin>; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo4-supply = <®ulator_vin>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + boost-supply = <®ulator_vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + + }; + + vdd_eth_2v5: ldo2 { + regulator-name = "dd_eth_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + vdd_eth_1v0: ldo6 { + regulator-name = "vdd_eth_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge = <1>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, + <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", + "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + }; + + i2c4_eeprom: eeprom@50 { + compatible = "microchip,24c32", + "atmel,24c32"; + reg = <0x50>; + }; + + i2c4_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + status = "okay"; + + flash0: flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + m25p,fast-read; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>; + pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>; + status = "okay"; +}; + +&sai2a { + dma-names = "rx"; + st,sync = <&sai2b 2>; + clocks = <&rcc SAI2_K>, <&sai2b>; + clock-names = "sai_ck", "MCLK"; + #clock-cells = <0>; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&tlv320_rx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sai2b { + dma-names = "tx"; + #clock-cells = <0>; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&tlv320_tx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>; + cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; +}; + +&spi1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_a>; + pinctrl-1 = <&spi1_sleep_pins_a>; + cs-gpios = <&gpioz 3 0>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + pinctrl-3 = <&uart4_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b &usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_a>; + pinctrl-1 = <&usart3_sleep_pins_a>; + pinctrl-2 = <&usart3_idle_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 4709677151aa..46b87a27d8b3 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -137,10 +137,13 @@ sound { compatible = "audio-graph-card"; - routing = - "MIC_IN", "Capture", - "Capture", "Mic Bias", - "Playback", "HP_OUT"; + widgets = "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Microphone", "Microphone Jack"; + routing = "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias"; dais = <&sai2a_port &sai2b_port>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index c06edd2eacb0..e61df23d361a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -80,17 +80,19 @@ vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; +}; - adc1: adc@0 { - st,min-sample-time-nsecs = <5000>; - st,adc-channels = <0>; - status = "okay"; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; }; +}; - adc2: adc@100 { - st,adc-channels = <1>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; +&adc2 { + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; }; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 50af4a27d6be..0069ad75d55e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -87,7 +87,7 @@ sound { compatible = "audio-graph-card"; - label = "STM32MP1-AV96-HDMI"; + label = "STM32-AV96-HDMI"; dais = <&sai2a_port>; status = "okay"; }; @@ -111,17 +111,39 @@ vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; +}; - adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; }; - adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; +}; + +&adc2 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; }; }; @@ -321,6 +343,12 @@ }; }; }; + + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; }; <dc { @@ -330,11 +358,7 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&adv7513_in>; }; }; @@ -452,7 +476,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&usart2_pins_a>; pinctrl-1 = <&usart2_sleep_pins_a>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi index c32c160f97f2..92d906bfd5d7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi @@ -57,15 +57,35 @@ status = "okay"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -192,6 +212,12 @@ reg = <0x50>; pagesize = <16>; }; + + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; }; &sdmmc1 { /* MicroSD */ diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index bb40fb46da81..bba19f21e527 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -213,12 +213,6 @@ status = "disabled"; }; }; - - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; }; &ipcc { diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi index 5fdb74b652ac..ab7f0ba49639 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi @@ -41,15 +41,35 @@ status = "okay"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -90,6 +110,14 @@ }; }; +&i2c4 { + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index cefeeb00fc22..511113f2e399 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -93,28 +93,39 @@ &adc { pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + pinctrl-0 = <&adc12_usb_cc_pins_a>; vdd-supply = <&vdd>; vdda-supply = <&vdd>; vref-supply = <&vrefbuf>; - status = "disabled"; + status = "okay"; adc1: adc@0 { + status = "okay"; /* * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: * 5 * (56 + 47kOhms) * 5pF => 2.5us. * Use arbitrary margin here (e.g. 5us). */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + /* USB Type-C CC1 & CC2 */ + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -379,21 +390,21 @@ regulator-always-on; }; - bst_out: boost { + bst_out: boost { regulator-name = "bst_out"; interrupts = <IT_OCP_BOOST 0>; - }; + }; vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - }; + }; - vbus_sw: pwr_sw2 { + vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; regulator-active-discharge = <1>; - }; + }; }; onkey { @@ -435,7 +446,7 @@ i2s2_port: port { i2s2_endpoint: endpoint { remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; }; }; @@ -457,8 +468,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&sii9022_in>; }; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index fd37bd1f3920..4192c23848c3 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -255,6 +255,12 @@ pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + }; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 250d6b87ab4d..d7c7b454a11a 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -286,7 +286,7 @@ clock-names = "ahb", "tcon-ch0", "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; status = "disabled"; @@ -517,6 +517,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc2_4bit_pe_pins: mmc2-4bit-pe-pins { + pins = "PE4", "PE5", "PE6", "PE7", + "PE8", "PE9"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts new file mode 100644 index 000000000000..577ead1d02a0 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +/dts-v1/; + +#include "sun7i-a20-icnova-a20.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "In-Circuit ICnova A20 ADB4006"; + compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +®_ahci_5v { + status = "okay"; +}; + +&ac_power_supply { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi new file mode 100644 index 000000000000..46616c6bc899 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/interrupt-controller/irq.h> + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 4aa9d88c9ea3..cd4bf60dbb3c 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -190,7 +190,7 @@ clock-names = "ahb", "tcon-ch0", "lvds-alt"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_LCD>, <&ccu RST_BUS_LVDS>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 82fdb04122ca..94eb3bfc989e 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -456,7 +456,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index b001251644f7..3b9a282c2746 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -191,7 +191,7 @@ <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>; reset-names = "lcd"; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index 683419d5c0e5..89433f251df0 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -14,7 +14,7 @@ * to the SYS_NIRQ line on OMAP. Therefore, configure the * defaults for the SYS_NIRQ pin here. */ - twl4030_pins: pinmux_twl4030_pins { + twl4030_pins: twl4030-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ >; @@ -28,7 +28,7 @@ * sys_nvmode2 signaling. */ &omap3_pmx_wkup { - twl4030_vpins: pinmux_twl4030_vpins { + twl4030_vpins: twl4030-vpins-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index 5730e46b0067..64e38c7c8be7 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -19,7 +19,7 @@ }; &omap4_pmx_wkup { - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + twl6030_wkup_pins: twl6030-wkup-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; @@ -27,7 +27,7 @@ }; &omap4_pmx_core { - twl6030_pins: pinmux_twl6030_pins { + twl6030_pins: twl6030-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 96495d965163..1a19aec8957b 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -202,7 +202,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 6280c5e86a12..16b4e06c4efa 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -75,7 +75,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { @@ -294,9 +294,9 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index c00d39562a10..6f9878f124c4 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -44,7 +44,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { @@ -82,6 +82,11 @@ label = "dsa"; phy-mode = "xaui"; link = <&switch1port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; }; @@ -174,6 +179,11 @@ label = "dsa"; phy-mode = "xaui"; link = <&switch0port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; }; mdio { diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index 7b3276cd470f..df1335492a19 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -59,7 +59,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { @@ -115,6 +115,11 @@ link = <&switch1port10 &switch3port10 &switch2port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; }; }; @@ -156,6 +161,11 @@ phy-mode = "xgmii"; link = <&switch3port10 &switch2port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; switch1port10: port@10 { @@ -163,6 +173,11 @@ label = "dsa"; phy-mode = "xgmii"; link = <&switch0port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; }; }; @@ -246,6 +261,11 @@ link = <&switch3port9 &switch1port9 &switch0port10>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; }; @@ -295,6 +315,11 @@ label = "dsa"; phy-mode = "2500base-x"; link = <&switch2port10>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; switch3port10: port@10 { @@ -303,6 +328,11 @@ phy-mode = "xgmii"; link = <&switch1port9 &switch0port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 180acb0795b9..1461804ecaea 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -140,7 +140,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 73fdace4cb42..463c2452b9b7 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -129,7 +129,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 20beaa8433b6..f5ae0d5de315 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -154,7 +154,7 @@ port@0 { reg = <0>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index ff4479994b60..3f7dc787938e 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -294,7 +294,6 @@ reg = <0x4003e000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_WDT>; - clock-names = "wdog"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index cd9931f6bcbd..a7db3f3009f2 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -149,6 +149,7 @@ clocks = <&clkc 38>; interrupt-parent = <&intc>; interrupts = <0 25 4>; + clock-frequency = <400000>; reg = <0xe0004000 0x1000>; #address-cells = <1>; #size-cells = <0>; @@ -160,6 +161,7 @@ clocks = <&clkc 39>; interrupt-parent = <&intc>; interrupts = <0 48 4>; + clock-frequency = <400000>; reg = <0xe0005000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index d23201ba8cd7..6efdbca9d3ef 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -5,6 +5,7 @@ */ /dts-v1/; #include "zynq-7000.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Xilinx ZC702 board"; @@ -106,8 +107,11 @@ &i2c0 { status = "okay"; clock-frequency = <400000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-mux@74 { compatible = "nxp,pca9548"; @@ -298,6 +302,19 @@ }; }; + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_50_grp", "gpio0_51_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_50_grp", "gpio0_51_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + }; + pinctrl_sdhci0_default: sdhci0-default { mux { groups = "sdio0_2_grp"; diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h index 78d3d4b82c6c..f4db3e75d75f 100644 --- a/arch/arm/include/asm/arm_pmuv3.h +++ b/arch/arm/include/asm/arm_pmuv3.h @@ -92,7 +92,7 @@ #define RETURN_READ_PMEVCNTRN(n) \ return read_sysreg(PMEVCNTR##n) -static unsigned long read_pmevcntrn(int n) +static inline unsigned long read_pmevcntrn(int n) { PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); return 0; @@ -100,14 +100,14 @@ static unsigned long read_pmevcntrn(int n) #define WRITE_PMEVCNTRN(n) \ write_sysreg(val, PMEVCNTR##n) -static void write_pmevcntrn(int n, unsigned long val) +static inline void write_pmevcntrn(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVCNTRN); } #define WRITE_PMEVTYPERN(n) \ write_sysreg(val, PMEVTYPER##n) -static void write_pmevtypern(int n, unsigned long val) +static inline void write_pmevtypern(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVTYPERN); } diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 53be7ea6181b..9d2192156087 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -308,6 +308,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl, return URC_OK; } +static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl) +{ + unsigned long bytes = 0; + unsigned long insn; + unsigned long result = 0; + + /* + * unwind_get_byte() will advance `ctrl` one instruction at a time, so + * loop until we get an instruction byte where bit 7 is not set. + * + * Note: This decodes a maximum of 4 bytes to output 28 bits data where + * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence + * it is sufficient for unwinding the stack. + */ + do { + insn = unwind_get_byte(ctrl); + result |= (insn & 0x7f) << (bytes * 7); + bytes++; + } while (!!(insn & 0x80) && (bytes != sizeof(result))); + + return result; +} + /* * Execute the current unwind instruction. */ @@ -361,7 +384,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) if (ret) goto error; } else if (insn == 0xb2) { - unsigned long uleb128 = unwind_get_byte(ctrl); + unsigned long uleb128 = unwind_decode_uleb128(ctrl); ctrl->vrs[SP] += 0x204 + (uleb128 << 2); } else { diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 67f72ca984b2..1956b095e699 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * arch/arm/mac-sa1100/jornada720_ssp.c * * Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> @@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte + * @byte: input byte to reverse * * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 @@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse); /** * jornada_ssp_byte - waits for ready ssp bus and sends byte + * @byte: input byte to transmit * * waits for fifo buffer to clear and then transmits, if it doesn't then we will * timeout after <timeout> rounds. Needs mcu running before its called. @@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte); /** * jornada_ssp_inout - decide if input is command or trading byte + * @byte: input byte to send (may be %TXDUMMY) * * returns : (jornada_ssp_byte(byte)) on success * : %-ETIMEDOUT on timeout failure diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 7483ef8bccda..62206ef25037 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -23,6 +23,9 @@ @ ENTRY(do_vfp) mov r1, r10 - mov r3, r9 - b vfp_entry + str lr, [sp, #-8]! + add r3, sp, #4 + str r9, [r3] + bl vfp_entry + ldr pc, [sp], #8 ENDPROC(do_vfp) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 4d8478264d82..a4610d0f3215 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -172,13 +172,14 @@ vfp_hw_state_valid: @ out before setting an FPEXC that @ stops us reading stuff VFPFMXR FPEXC, r1 @ Restore FPEXC last + mov sp, r3 @ we think we have handled things + pop {lr} sub r2, r2, #4 @ Retry current instruction - if Thumb str r2, [sp, #S_PC] @ mode it's two 16-bit instructions, @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. - mov lr, r3 @ we think we have handled things local_bh_enable_and_ret: adr r0, . mov r1, #SOFTIRQ_DISABLE_OFFSET @@ -209,8 +210,9 @@ skip: process_exception: DBGSTR "bounce" + mov sp, r3 @ setup for a return to the user code. + pop {lr} mov r2, sp @ nothing stacked - regdump is at TOS - mov lr, r3 @ setup for a return to the user code. @ Now call the C code to package up the bounce to the support code @ r0 holds the trigger instruction diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 62f45f71ec65..57ac18738c99 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -93,6 +93,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -407,7 +408,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi index 73a352ea8fd5..39481d7fd7d4 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi @@ -250,6 +250,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster1_l2: cache@100 { @@ -258,6 +259,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster2_l2: cache@200 { @@ -266,6 +268,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; cluster3_l2: cache@300 { @@ -274,6 +277,7 @@ cache-line-size = <64>; cache-sets = <2048>; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index cd1c5b04890a..6f61798a109f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts new file mode 100644 index 000000000000..edce8850b338 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C302 aw409 Development Board"; + compatible = "amlogic,aw409", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x10000000>; + }; +}; + +&uart_b { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi new file mode 100644 index 000000000000..60ad4f3eef9d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + uart_b: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index eed96f262844..c8f344596285 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -37,6 +37,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b984950591e2..768d0ed78dbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -106,6 +106,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index f58fd2a6fe61..543e70669df5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -51,6 +51,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 431572b384db..86e6ceb31d5e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -106,6 +106,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 11f89bfecb56..2673f0dbafe7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -133,6 +133,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 617d322af0df..643f94d9d08e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -89,6 +89,7 @@ l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 70a10bcafcff..377660d705d1 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -97,15 +97,23 @@ }; xgene_L2_0: l2-cache-0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_1: l2-cache-1 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_2: l2-cache-2 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_3: l2-cache-3 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index d73e809fe41a..efa79209f4b2 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -81,15 +81,23 @@ }; xgene_L2_0: l2-cache-0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_1: l2-cache-1 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_2: l2-cache-2 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; xgene_L2_3: l2-cache-3 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index ef7d17aef58f..a750be13ace8 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -54,7 +54,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb @@ -99,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 678bb0358751..9cbb31191cf9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -47,6 +47,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index b9fd24cdc919..f8acbefc805b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -85,6 +85,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index a01e3cfec77f..50f68ca5a9af 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -80,6 +80,7 @@ l2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 1e5d76c4d83d..1aa38ed09aa4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -96,21 +96,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CPU_PW20: cpu-pw20 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index c12c86915ec8..8581ea55d254 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -96,21 +96,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CPU_PW20: cpu-pw20 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 70fadd79851a..792b7224ca5b 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -60,6 +60,7 @@ A35_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts new file mode 100644 index 000000000000..1c4e4d175989 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Emtop Embedded Solutions + */ + +/dts-v1/; + +#include "imx8mm-emtop-som.dtsi" + +/ { + model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1"; + compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som", + "fsl,imx8mm"; + +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi new file mode 100644 index 000000000000..67d22d3768aa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Emtop Embedded Solutions + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> + +#include "imx8mm.dtsi" + +/ { + model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM"; + compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + function = LED_FUNCTION_POWER; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck3: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <945000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <945000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3600000>; + }; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_led: emtop-gpio-led-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + + pinctrl_i2c1: emtop-i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: emtop-pmic-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart2: emtop-uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc3: emtop-usdhc3-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: emtop-wdog-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 3f9dfd4d3884..df8e808ac473 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -19,6 +19,18 @@ reg = <0x0 0x40000000 0 0x80000000>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -303,6 +315,41 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; + reg-names = "main", "cec", "edid", "packet"; + adi,dsi-lanes = <4>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + }; + }; + ptn5110: tcpc@50 { compatible = "nxp,ptn5110"; pinctrl-names = "default"; @@ -348,6 +395,26 @@ }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&adv7533_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,tx-deemph-gen1 = <0x2d>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts new file mode 100644 index 000000000000..164df627a213 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019-2020 NXP + */ + +/dts-v1/; + +#include "imx8mm-evk.dtsi" + +/ { + model = "FSL i.MX8MM EVKB"; + compatible = "fsl,imx8mm-evkb", "fsl,imx8mm"; +}; + +&i2c1 { + /delete-node/ pmic@4b; + + pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* VDD_SOC with PCIe */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-standby-voltage = <850000>; + }; + + /* VDD_GPU, VDD_VPU, VDD_DRAM */ + buck3_reg: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_3V3 */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1V8, NVCC_1V8, NVCC_ENET */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_DRAM for LPDDR4 */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_SNVS_1P8 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_SNVS_0P8 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_*_1V8 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_PHY_0V9 */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* NVCC_SD2 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts index e9447738b104..606a4f4d5f15 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts @@ -80,6 +80,35 @@ startup-delay-us = <100>; off-on-delay-us = <12000>; }; + + panel { + compatible = "panel-lvds"; + width-mm = <170>; + height-mm = <28>; + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <49500000>; + hactive = <800>; + hback-porch = <48>; + hfront-porch = <312>; + hsync-len = <40>; + vactive = <600>; + vback-porch = <19>; + vfront-porch = <61>; + vsync-len = <20>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_out_bridge: endpoint { + remote-endpoint = <&bridge_out_panel>; + }; + }; + }; }; &ecspi1 { @@ -113,8 +142,60 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi83"; + reg = <0x2c>; + enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_bridge>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out_bridge: endpoint { + data-lanes = <1 2>; + lane-polarities = <1 0 0 0 0>; + remote-endpoint = <&bridge_in_dsi>; + }; + }; + }; +}; + + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -166,6 +247,12 @@ >; }; + pinctrl_dsi_bridge: dsibridgeggrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x19 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 12260290c109..b4466a26d838 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -219,12 +219,14 @@ read-only; reg = <0x53>; pagesize = <16>; + vcc-supply = <®_vcc3v3>; }; eeprom0: eeprom@57 { compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; + vcc-supply = <®_vcc3v3>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 9e7d38872157..de7f67a4ff2a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -149,7 +149,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; @@ -234,8 +234,6 @@ }; fan-controller@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x0a>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index df3b2c93d2d5..0ec2ce3dd721 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -354,7 +354,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index c33ec6826d32..03cd29063312 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -327,7 +327,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 363020a08c9b..6f26914602c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -293,7 +293,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 9e82069c941f..038ef8a3e604 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -43,6 +43,17 @@ enable-active-high; }; + reg_camera: regulator-camera { + compatible = "regulator-fixed"; + regulator-name = "mipi_pwr"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "vsd_3v3"; @@ -63,18 +74,30 @@ enable-active-high; }; - sound { - compatible = "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - audio-cpu = <&sai3>; - audio-codec = <&wm8962>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + frame-master; + bitclock-master; + }; }; }; @@ -96,6 +119,36 @@ }; }; +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clk IMX8MN_CLK_CLKO1>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MN_CLK_CLKO1>; + assigned-clock-parents = <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <24000000>; + AVDD-supply = <®_camera>; /* 2.8v */ + powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + + port { + /* MIPI CSI-2 bus endpoint */ + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; &i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -142,14 +195,32 @@ 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; + #sound-dai-cells = <0>; }; }; +&isi { + status = "okay"; +}; + &easrc { fsl,asrc-rate = <48000>; status = "okay"; }; +&mipi_csi { + status = "okay"; + + ports { + port@0 { + mipi_csi_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -226,6 +297,14 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 + >; + }; + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts index 3ed7021a487c..406a711486da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -152,46 +152,6 @@ extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; }; -&pinctrl_fec1 { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ - >; -}; - -&pinctrl_fec1_sleep { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 - MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 - MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 - MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 - MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 - MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 - MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 - MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 - MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 - MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 - MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 - MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 - MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 - MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 - /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ - >; -}; - &iomuxc { pinctrl_captouch: captouchgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index 67072e6c77d5..7e5bbd5109eb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -27,6 +27,7 @@ regulator-name = "eth_phy_pwr"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <20000>; gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -222,6 +223,12 @@ }; }; }; + + eeprom_som: eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + pagesize = <16>; + }; }; &i2c3 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 7c12518dbc96..2ddba4213001 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -325,7 +325,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index bd84db550053..925b1637e38c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -1117,6 +1117,30 @@ }; }; + isi: isi@32e20000 { + compatible = "fsl,imx8mn-isi"; + reg = <0x32e20000 0x8000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&disp_blk_ctrl>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in: endpoint { + remote-endpoint = <&mipi_csi_out>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; @@ -1145,6 +1169,42 @@ #power-domain-cells = <1>; }; + mipi_csi: mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL2_1000M>; + assigned-clock-rates = <333000000>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_CAMERA_PIXEL>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_out: endpoint { + remote-endpoint = <&isi_in>; + }; + }; + }; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x32e40000 0x200>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index cdae45a48c2c..06e91297fb16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -118,6 +118,15 @@ clock-frequency = <100000000>; }; + reg_audio: regulator-wm8962 { + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -137,6 +146,32 @@ gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + frame-master; + bitclock-master; + }; + }; }; &ecspi2 { @@ -239,6 +274,34 @@ clock-frequency = <384000>; status = "okay"; + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wm8962>; + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <22576000>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + #sound-dai-cells = <0>; + }; + pca6416: gpio@20 { compatible = "nxp,pcal6416"; reg = <0x20>; @@ -315,6 +378,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -477,6 +550,16 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + >; + }; + pinctrl_tpm: tpmgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ @@ -547,4 +630,10 @@ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 >; }; + + pinctrl_wm8962: wm8962grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x59 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 92df6c1277c3..e9fb5f7f39b5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -23,6 +23,12 @@ stdout-path = &uart1; }; + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -102,6 +108,43 @@ pinctrl-names = "default"; }; }; + + reg_3p3vdd: regulator-3p3vdd { /* 3.3VDD */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "3P3VDD"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&i2c5 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3vdd>; + VDDIO-supply = <®_vdd_3p3v_awo>; + }; }; &fec { /* Second ethernet */ @@ -155,6 +198,17 @@ status = "okay"; }; +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usb3_1 { fsl,over-current-active-low; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index b5e76b992a10..31d85d5871c9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -23,10 +23,16 @@ stdout-path = &uart1; }; - clk_pcie: clock-pcie { + clk_ext_audio_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <24000000>; + }; + + clk_xtal25: clock-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; connector { @@ -140,12 +146,30 @@ }; }; - reg_avdd: regulator-avdd { /* AUDIO_VDD */ + reg_3p3vdd: regulator-3p3vdd { /* 3.3VDD */ compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "AUDIO_VDD"; + regulator-name = "3P3VDD"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; @@ -161,6 +185,15 @@ #size-cells = <0>; reg = <0>; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3vdd>; + VDDIO-supply = <®_vdd_3p3v_awo>; + }; + typec@3d { compatible = "nxp,ptn5150"; reg = <0x3d>; @@ -203,6 +236,13 @@ pagesize = <16>; reg = <0x54>; }; + + pcieclk: clock@6b { + compatible = "skyworks,si52144"; + reg = <0x6b>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; i2cmuxed1: i2c@1 { /* HDMI DDC I2C */ @@ -244,7 +284,7 @@ }; &pcie_phy { - clocks = <&clk_pcie>; + clocks = <&pcieclk 1>; clock-names = "ref"; fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; status = "okay"; @@ -256,6 +296,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usb_dwc3_0 { usb-role-switch; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 7e804f650784..cb1953d14aa9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -49,6 +49,14 @@ startup-delay-us = <100>; vin-supply = <&buck4>; }; + + reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo { /* VDD_3V3_AWO */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VDD_3P3V_AWO"; + }; }; &A53_0 { @@ -232,6 +240,36 @@ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + tc_bridge: bridge@f { + compatible = "toshiba,tc9595", "toshiba,tc358767"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tc9595>; + reg = <0xf>; + clock-names = "ref"; + clocks = <&clk IMX8MP_CLK_CLKOUT2>; + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>, + <&clk IMX8MP_CLK_CLKOUT2>, + <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; + assigned-clock-rates = <13000000>, <13000000>, <156000000>; + reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tc_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + pmic: pmic@25 { compatible = "nxp,pca9450c"; reg = <0x25>; @@ -398,6 +436,22 @@ status = "okay"; }; +&mipi_dsi { + samsung,burst-clock-frequency = <160000000>; + samsung,esc-clock-frequency = <10000000>; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&tc_bridge_in>; + }; + }; + }; +}; + &pwm1 { pinctrl-0 = <&pinctrl_pwm1>; pinctrl-names = "default"; @@ -863,6 +917,24 @@ >; }; + pinctrl_tc9595: dhcom-tc9595-grp { + fsl,pins = < + /* RESET_DSIBRIDGE */ + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000146 + /* DSI-CONV_INT Interrupt */ + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x141 + >; + }; + + pinctrl_sai3: dhcom-sai3-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + >; + }; + pinctrl_touch: dhcom-touch-grp { fsl,pins = < /* #TOUCH_INT */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 7816853162b3..fa37ce89f8d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -40,6 +40,17 @@ clock-frequency = <100000000>; }; + reg_audio_pwr: regulator-audio-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audio_pwr_reg>; + regulator-name = "audio-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; regulator-name = "can1-stby"; @@ -83,6 +94,37 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8960-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speaker", "External Speaker", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "External Speaker", "SPK_LP", + "External Speaker", "SPK_LN", + "External Speaker", "SPK_RP", + "External Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "Mic Jack", "MICB"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8960>; + }; + + }; }; &flexspi { @@ -344,6 +386,18 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + clock-names = "mclk"; + wlf,shared-lrclk; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + SPKVDD1-supply = <®_audio_pwr>; + }; + pca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -422,6 +476,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -499,6 +563,12 @@ }; &iomuxc { + pinctrl_audio_pwr_reg: audiopwrreggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0xd6 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 @@ -668,6 +738,16 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index 470ff8e31e32..64d522c71a44 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -14,6 +14,67 @@ compatible = "avnet,sm2s-imx8mp-14N0600E-ep1", "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp", "fsl,imx8mp"; + + reg_vcc_3v3_audio: 3v3-audio-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_AUD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vcc_1v8_audio: 1v8-audio-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_AUD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,bitclock-master = <&codec_dai>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <24000000>; + clocks = <&clk IMX8MP_CLK_CLKOUT1>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + VDDA-supply = <®_vcc_3v3_audio>; + VDDD-supply = <®_vcc_1v8_audio>; + VDDIO-supply = <®_vcc_1v8_audio>; + }; +}; + +/* I2S-0 = sai2 */ +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + + fsl,sai-mclk-direction-output; + status = "okay"; }; &flexcan1 { @@ -32,6 +93,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_smarc_gpio>; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + >; + }; + pinctrl_smarc_gpio: smarcgpiosgrp { fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index d8fb29e7e148..4240e20d38ac 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -202,6 +202,13 @@ }; }; + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tq-tlv320aic32x"; + audio-cpu = <&sai3>; + audio-codec = <&tlv320aic3x04>; + }; + thermal-zones { soc-thermal { trips { @@ -449,6 +456,18 @@ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tlv320aic3x04>; + reg = <0x18>; + clock-names = "mclk"; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + iov-supply = <®_vcc_3v3>; + ldoin-supply = <®_vcc_3v3>; + }; + se97_1c: temperature-sensor@1c { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; @@ -528,6 +547,16 @@ status = "okay"; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -843,6 +872,23 @@ fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x94 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x94 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x94 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x94 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x94 + >; + }; + + pinctrl_tlv320aic3x04: tlv320aic3x04grp { + fsl,pins = < + /* CODEC RST# */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x180 + >; + }; + /* X61 */ pinctrl_uart1: uart1grp { fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi new file mode 100644 index 000000000000..560c68e4da6d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -0,0 +1,587 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + aliases { + ethernet0 = &eqos; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + key-user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck3_reg>; +}; + +&A53_1 { + cpu-supply = <&buck3_reg>; +}; + +&A53_2 { + cpu-supply = <&buck3_reg>; +}; + +&A53_3 { + cpu-supply = <&buck3_reg>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <0x0>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@16 { + gw,mode = <4>; + reg = <0x16>; + label = "fan_tach"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_1p0"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_1p8"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_2p5"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_soc"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_arm"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + + fan-controller@0 { + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + /* vdd_soc */ + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_dram */ + buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_arm */ + buck3_reg: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* vdd_1p8 */ + buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT2: nvcc_snvs_1p8 */ + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT3: vdd_1p0 */ + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT4: vdd_2p5 */ + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + /* OUT5: vdd_3p3 */ + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +/* off-board header */ +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* off-board header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* off-board */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + status = "okay"; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + >; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x140 /* RST# */ + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x150 /* IRQ# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x150 /* IRQ# */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index eb51d648359b..92514b71b5f4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -281,7 +281,7 @@ }; channel@8 { - gw,mode = <1>; + gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts new file mode 100644 index 000000000000..4a1bbbbe19e6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include "imx8mp-venice-gw702x.dtsi" +#include "imx8mp-venice-gw7905.dtsi" + +/ { + model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit"; + compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; +}; + +/* Disable SOM interfaces not used on baseboard */ +&eqos { + status = "disabled"; +}; + +&usdhc1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi new file mode 100644 index 000000000000..0d40cb0f05f6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> + +/ { + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + compatible = "regulator-fixed"; + regulator-name = "SD2_3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "gpioa", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "gpiod", "", "", + "gpiob", "gpioc", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "pci_usb_sel", "", + "pci_wdis#", "", "", ""; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* USB1 - Type C front panel SINK port J14 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB: + * P1 - USBC connector (host only) + * P2 - USB2 test connector + * P3 - miniPCIe full card + * P4 - miniPCIe half card + */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x40000040 /* GPIOA */ + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000040 /* GPIOD */ + MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x40000040 /* GPIOB */ + MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x40000040 /* GPIOC */ + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000106 /* PCI_USBSEL */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */ + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */ + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x6 /* LEDR */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x106 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x6 /* USBHUB_RST# (ext p/u) */ + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index f81391993354..274c088db981 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -304,6 +304,210 @@ nvmem-cells = <&imx8mp_uid>; nvmem-cell-names = "soc_unique_id"; + etm0: etm@28440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28440000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_0>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + }; + + etm1: etm@28540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28540000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_1>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + }; + + etm2: etm@28640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28640000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_2>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port2>; + }; + }; + }; + }; + + etm3: etm@28740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28740000 0x10000>; + arm,primecell-periphid = <0xbb95d>; + cpu = <&A53_3>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port3>; + }; + }; + }; + }; + + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + + ca_funnel_in_port2: endpoint { + remote-endpoint = <&etm2_out_port>; + }; + }; + + port@3 { + reg = <3>; + + ca_funnel_in_port3: endpoint { + remote-endpoint = <&etm3_out_port>; + }; + }; + }; + + out-ports { + port { + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + }; + }; + + funnel@28c03000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x28c03000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hugo_funnel_in_port0: endpoint { + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + + hugo_funnel_in_port1: endpoint { + /* M7 input */ + }; + }; + + port@2 { + reg = <2>; + + hugo_funnel_in_port2: endpoint { + /* DSP input */ + }; + }; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + }; + }; + + etf@28c04000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c04000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf_in_port: endpoint { + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + }; + + out-ports { + port { + etf_out_port: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + }; + + etr@28c06000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c06000 0x1000>; + clocks = <&clk IMX8MP_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; @@ -534,26 +738,16 @@ <&clk IMX8MP_CLK_A53_CORE>, <&clk IMX8MP_CLK_NOC>, <&clk IMX8MP_CLK_NOC_IO>, - <&clk IMX8MP_CLK_GIC>, - <&clk IMX8MP_CLK_AUDIO_AHB>, - <&clk IMX8MP_CLK_AUDIO_AXI_SRC>, - <&clk IMX8MP_AUDIO_PLL1>, - <&clk IMX8MP_AUDIO_PLL2>; + <&clk IMX8MP_CLK_GIC>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_ARM_PLL_OUT>, <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL2_500M>, - <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>; + <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <0>, <0>, <1000000000>, <800000000>, - <500000000>, - <400000000>, - <800000000>, - <393216000>, - <361267200>; + <500000000>; }; src: reset-controller@30390000 { @@ -595,6 +789,13 @@ reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; }; + pgc_audio: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_AUDIO_AXI>; + }; + pgc_gpu2d: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_GPU2D>; @@ -1147,6 +1348,157 @@ }; }; + aips5: bus@30c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spba-bus@30c00000 { + compatible = "fsl,spba-bus", "simple-bus"; + reg = <0x30c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sai1: sai@30c10000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c10000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai2: sai@30c20000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c20000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai3: sai@30c30000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c30000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai5: sai@30c50000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c50000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai6: sai@30c60000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c60000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sai7: sai@30c80000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c80000 0x10000>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; + dma-names = "rx", "tx"; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + sdma3: dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma2: dma-controller@30e10000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e10000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + audio_blk_ctrl: clock-controller@30e20000 { + compatible = "fsl,imx8mp-audio-blk-ctrl"; + reg = <0x30e20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_SAI1>, + <&clk IMX8MP_CLK_SAI2>, + <&clk IMX8MP_CLK_SAI3>, + <&clk IMX8MP_CLK_SAI5>, + <&clk IMX8MP_CLK_SAI6>, + <&clk IMX8MP_CLK_SAI7>; + clock-names = "ahb", + "sai1", "sai2", "sai3", + "sai5", "sai6", "sai7"; + power-domains = <&pgc_audio>; + }; + }; + noc: interconnect@32700000 { compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; reg = <0x32700000 0x100000>; @@ -1174,6 +1526,118 @@ #size-cells = <1>; ranges; + isi_0: isi@32e00000 { + compatible = "fsl,imx8mp-isi"; + reg = <0x32e00000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&media_blk_ctrl>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + isi_in_0: endpoint { + remote-endpoint = <&mipi_csi_0_out>; + }; + }; + + port@1 { + reg = <1>; + + isi_in_1: endpoint { + remote-endpoint = <&mipi_csi_1_out>; + }; + }; + }; + }; + + dewarp: dwe@32e30000 { + compatible = "nxp,imx8mp-dw100"; + reg = <0x32e30000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "ahb"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>; + }; + + mipi_csi_0: csi@32e40000 { + compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; + reg = <0x32e40000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_0_out: endpoint { + remote-endpoint = <&isi_in_0>; + }; + }; + }; + }; + + mipi_csi_1: csi@32e50000 { + compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; + reg = <0x32e50000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <266000000>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <266000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_1_out: endpoint { + remote-endpoint = <&isi_in_1>; + }; + }; + }; + }; + mipi_dsi: dsi@32e60000 { compatible = "fsl,imx8mp-mipi-dsim"; reg = <0x32e60000 0x400>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 200268660518..3ae3824be027 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -26,7 +26,7 @@ }; panel { - compatible = "innolux,n125hce-gn1", "simple-panel"; + compatible = "innolux,n125hce-gn1"; power-supply = <®_main_3v3>; backlight = <&backlight>; no-hpd; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index c5244b608524..afb3ceb06751 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -108,8 +108,6 @@ <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, <&clk IMX8MQ_CLK_PCIE1_AUX>; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; status = "okay"; }; @@ -122,8 +120,6 @@ <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, <&clk IMX8MQ_CLK_PCIE2_AUX>; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 3a52679ecd68..cb777b47baf9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -177,7 +177,7 @@ port@2 { reg = <2>; - label = "cpu"; + phy-mode = "rev-rmii"; ethernet = <&fec1>; fixed-link { diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 0492556a10db..1a2d2c04db32 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -547,11 +547,13 @@ }; lcdif: lcd-controller@30320000 { - compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; - clock-names = "pix"; + clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>, + <&clk IMX8MQ_CLK_DISP_APB_ROOT>, + <&clk IMX8MQ_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_LCDIF_PIXEL>, @@ -1054,9 +1056,11 @@ }; }; - mipi_dsi: mipi-dsi@30a00000 { + mipi_dsi: dsi@30a00000 { compatible = "fsl,imx8mq-nwl-dsi"; reg = <0x30a00000 0x300>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clk IMX8MQ_CLK_DSI_CORE>, <&clk IMX8MQ_CLK_DSI_AHB>, <&clk IMX8MQ_CLK_DSI_IPG_DIV>, @@ -1577,6 +1581,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + bus-range = <0x00 0xff>; ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 32193a43ff49..57627bdaa851 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -52,6 +52,7 @@ A35_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index fefb93487291..c50f46f06f62 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -116,6 +116,10 @@ no-mmc; }; +&wdog3 { + status = "okay"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index e8d49660ac85..8643612ace8c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -46,12 +46,27 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <10000>; + exit-latency-us = <7000>; + min-residency-us = <27000>; + wakeup-latency-us = <15000>; + }; + }; + A55_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0>; enable-method = "psci"; #cooling-cells = <2>; + cpu-idle-states = <&cpu_pd_wait>; }; A55_1: cpu@100 { @@ -60,6 +75,7 @@ reg = <0x100>; enable-method = "psci"; #cooling-cells = <2>; + cpu-idle-states = <&cpu_pd_wait>; }; }; @@ -153,6 +169,24 @@ nxp,no-divider; }; + wdog1: watchdog@442d0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x442d0000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG1_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog2: watchdog@442e0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x442e0000 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG2_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + tpm1: pwm@44310000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x44310000 0x1000>; @@ -287,14 +321,6 @@ #size-cells = <1>; ranges; - mediamix: power-domain@44462400 { - compatible = "fsl,imx93-src-slice"; - reg = <0x44462400 0x400>, <0x44465800 0x400>; - #power-domain-cells = <0>; - clocks = <&clk IMX93_CLK_MEDIA_AXI>, - <&clk IMX93_CLK_MEDIA_APB>; - }; - mlmix: power-domain@44461800 { compatible = "fsl,imx93-src-slice"; reg = <0x44461800 0x400>, <0x44464800 0x400>; @@ -302,6 +328,14 @@ clocks = <&clk IMX93_CLK_ML_APB>, <&clk IMX93_CLK_ML>; }; + + mediamix: power-domain@44462400 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; }; anatop: anatop@44480000 { @@ -344,6 +378,33 @@ status = "disabled"; }; + wdog3: watchdog@42490000 { + compatible = "fsl,imx93-wdt"; + reg = <0x42490000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG3_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog4: watchdog@424a0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x424a0000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG4_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + wdog5: watchdog@424b0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x424b0000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_WDOG5_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + tpm3: pwm@424e0000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x424e0000 0x1000>; @@ -640,28 +701,6 @@ status = "disabled"; }; - eqos: ethernet@428a0000 { - compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; - reg = <0x428a0000 0x10000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>, - <&clk IMX93_CLK_ENET_QOS_GATE>; - clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; - assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; - assigned-clock-rates = <100000000>, <250000000>; - intf_mode = <&wakeupmix_gpr 0x28>; - snps,clk-csr = <0>; - status = "disabled"; - }; - fec: ethernet@42890000 { compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x42890000 0x10000>; @@ -685,6 +724,29 @@ assigned-clock-rates = <100000000>, <250000000>, <50000000>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>; + status = "disabled"; + }; + + eqos: ethernet@428a0000 { + compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x428a0000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>, + <&clk IMX93_CLK_ENET_QOS_GATE>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; + assigned-clock-rates = <100000000>, <250000000>; + intf_mode = <&wakeupmix_gpr 0x28>; + snps,clk-csr = <0>; status = "disabled"; }; @@ -760,6 +822,13 @@ gpio-ranges = <&iomuxc 0 92 16>; }; + ocotp: efuse@47510000 { + compatible = "fsl,imx93-ocotp", "syscon"; + reg = <0x47510000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + }; + s4muap: mailbox@47520000 { compatible = "fsl,imx93-mu-s4"; reg = <0x47520000 0x10000>; @@ -788,5 +857,11 @@ #power-domain-cells = <1>; status = "disabled"; }; + + ddr-pmu@4e300dc0 { + compatible = "fsl,imx93-ddr-pmu"; + reg = <0x4e300dc0 0x200>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index d8c82da88ca0..5ac1cc9ff50e 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -53,11 +53,13 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi index 3e306218d533..42409ec56792 100644 --- a/arch/arm64/boot/dts/freescale/s32v234.dtsi +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -62,11 +62,13 @@ cluster0_l2_cache: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2_cache: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index a57f35eb5ef6..7e137a884ae5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -204,11 +204,13 @@ A53_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; A73_L2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index f6d3202b0d1a..b7e2cbf466b3 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -187,11 +187,13 @@ CLUSTER0_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; CLUSTER1_L2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -407,7 +409,7 @@ compatible = "pinctrl-single"; reg = <0x0 0xf7010000 0x0 0x27c>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; #gpio-range-cells = <3>; pinctrl-single,register-width = <32>; @@ -446,7 +448,7 @@ compatible = "pinconf-single"; reg = <0x0 0xf7010800 0x0 0x28c>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; @@ -455,7 +457,7 @@ compatible = "pinconf-single"; reg = <0x0 0xf8001800 0x0 0x78>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi index e7d22619a4c0..3e27624c31de 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi @@ -17,13 +17,13 @@ &bl_pwm_pmx_func >; - boot_sel_pmx_func: boot_sel_pmx_func { + boot_sel_pmx_func: boot-sel-pins { pinctrl-single,pins = < 0x0 MUX_M0 /* BOOT_SEL (IOMG000) */ >; }; - emmc_pmx_func: emmc_pmx_func { + emmc_pmx_func: emmc-pins { pinctrl-single,pins = < 0x100 MUX_M0 /* EMMC_CLK (IOMG064) */ 0x104 MUX_M0 /* EMMC_CMD (IOMG065) */ @@ -38,7 +38,7 @@ >; }; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0xc MUX_M0 /* SD_CLK (IOMG003) */ 0x10 MUX_M0 /* SD_CMD (IOMG004) */ @@ -48,7 +48,7 @@ 0x20 MUX_M0 /* SD_DATA3 (IOMG008) */ >; }; - sd_pmx_idle: sd_pmx_idle { + sd_pmx_idle: sd-idle-pins { pinctrl-single,pins = < 0xc MUX_M1 /* SD_CLK (IOMG003) */ 0x10 MUX_M1 /* SD_CMD (IOMG004) */ @@ -59,7 +59,7 @@ >; }; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x128 MUX_M0 /* SDIO_CLK (IOMG074) */ 0x12c MUX_M0 /* SDIO_CMD (IOMG075) */ @@ -69,7 +69,7 @@ 0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */ >; }; - sdio_pmx_idle: sdio_pmx_idle { + sdio_pmx_idle: sdio-idle-pins { pinctrl-single,pins = < 0x128 MUX_M1 /* SDIO_CLK (IOMG074) */ 0x12c MUX_M1 /* SDIO_CMD (IOMG075) */ @@ -80,7 +80,7 @@ >; }; - isp_pmx_func: isp_pmx_func { + isp_pmx_func: isp-pins { pinctrl-single,pins = < 0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */ 0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */ @@ -101,19 +101,19 @@ >; }; - hkadc_ssi_pmx_func: hkadc_ssi_pmx_func { + hkadc_ssi_pmx_func: hkadc-ssi-pins { pinctrl-single,pins = < 0x68 MUX_M0 /* HKADC_SSI (IOMG026) */ >; }; - codec_clk_pmx_func: codec_clk_pmx_func { + codec_clk_pmx_func: codec-clk-pins { pinctrl-single,pins = < 0x6c MUX_M0 /* CODEC_CLK (IOMG027) */ >; }; - codec_pmx_func: codec_pmx_func { + codec_pmx_func: codec-pins { pinctrl-single,pins = < 0x70 MUX_M1 /* DMIC_CLK (IOMG028) */ 0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */ @@ -122,7 +122,7 @@ >; }; - fm_pmx_func: fm_pmx_func { + fm_pmx_func: fm-pins { pinctrl-single,pins = < 0x80 MUX_M1 /* FM_XCLK (IOMG032) */ 0x84 MUX_M1 /* FM_XFS (IOMG033) */ @@ -131,7 +131,7 @@ >; }; - bt_pmx_func: bt_pmx_func { + bt_pmx_func: bt-pins { pinctrl-single,pins = < 0x90 MUX_M0 /* BT_XCLK (IOMG036) */ 0x94 MUX_M0 /* BT_XFS (IOMG037) */ @@ -140,26 +140,26 @@ >; }; - pwm_in_pmx_func: pwm_in_pmx_func { + pwm_in_pmx_func: pwm-in-pins { pinctrl-single,pins = < 0xb8 MUX_M1 /* PWM_IN (IOMG046) */ >; }; - bl_pwm_pmx_func: bl_pwm_pmx_func { + bl_pwm_pmx_func: bl-pwm-pins { pinctrl-single,pins = < 0xbc MUX_M1 /* BL_PWM (IOMG047) */ >; }; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0xc0 MUX_M0 /* UART0_RXD (IOMG048) */ 0xc4 MUX_M0 /* UART0_TXD (IOMG049) */ >; }; - uart1_pmx_func: uart1_pmx_func { + uart1_pmx_func: uart1-pins { pinctrl-single,pins = < 0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */ 0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */ @@ -168,7 +168,7 @@ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */ 0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */ @@ -177,7 +177,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */ 0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */ @@ -186,7 +186,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */ 0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */ @@ -195,35 +195,35 @@ >; }; - uart5_pmx_func: uart5_pmx_func { + uart5_pmx_func: uart5-pins { pinctrl-single,pins = < 0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */ 0x1cc MUX_M1 /* UART5_TXD (IOMG115) */ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */ 0xec MUX_M0 /* I2C0_SDA (IOMG059) */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */ 0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c2_pmx_func: i2c2-pins { pinctrl-single,pins = < 0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */ 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ >; }; - spi0_pmx_func: spi0_pmx_func { + spi0_pmx_func: spi0-pins { pinctrl-single,pins = < 0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */ 0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */ @@ -244,7 +244,7 @@ &bl_pwm_cfg_func >; - boot_sel_cfg_func: boot_sel_cfg_func { + boot_sel_cfg_func: boot-sel-cfg-pins { pinctrl-single,pins = < 0x0 0x0 /* BOOT_SEL (IOCFG000) */ >; @@ -253,7 +253,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - hkadc_ssi_cfg_func: hkadc_ssi_cfg_func { + hkadc_ssi_cfg_func: hkadc-ssi-cfg-pins { pinctrl-single,pins = < 0x6c 0x0 /* HKADC_SSI (IOCFG027) */ >; @@ -262,7 +262,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - emmc_clk_cfg_func: emmc_clk_cfg_func { + emmc_clk_cfg_func: emmc-clk-cfg-pins { pinctrl-single,pins = < 0x104 0x0 /* EMMC_CLK (IOCFG065) */ >; @@ -271,7 +271,7 @@ pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - emmc_cfg_func: emmc_cfg_func { + emmc_cfg_func: emmc-cfg-pins { pinctrl-single,pins = < 0x108 0x0 /* EMMC_CMD (IOCFG066) */ 0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */ @@ -288,7 +288,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - emmc_rst_cfg_func: emmc_rst_cfg_func { + emmc_rst_cfg_func: emmc-rst-cfg-pins { pinctrl-single,pins = < 0x12c 0x0 /* EMMC_RST_N (IOCFG075) */ >; @@ -297,7 +297,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0xc 0x0 /* SD_CLK (IOCFG003) */ >; @@ -305,7 +305,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>; }; - sd_clk_cfg_idle: sd_clk_cfg_idle { + sd_clk_cfg_idle: sd-clk-cfg-idle-pins { pinctrl-single,pins = < 0xc 0x0 /* SD_CLK (IOCFG003) */ >; @@ -314,7 +314,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x10 0x0 /* SD_CMD (IOCFG004) */ 0x14 0x0 /* SD_DATA0 (IOCFG005) */ @@ -326,7 +326,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - sd_cfg_idle: sd_cfg_idle { + sd_cfg_idle: sd-cfg-idle-pins { pinctrl-single,pins = < 0x10 0x0 /* SD_CMD (IOCFG004) */ 0x14 0x0 /* SD_DATA0 (IOCFG005) */ @@ -339,7 +339,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x134 0x0 /* SDIO_CLK (IOCFG077) */ >; @@ -347,7 +347,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - sdio_clk_cfg_idle: sdio_clk_cfg_idle { + sdio_clk_cfg_idle: sdio-clk-cfg-idle-pins { pinctrl-single,pins = < 0x134 0x0 /* SDIO_CLK (IOCFG077) */ >; @@ -356,7 +356,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x138 0x0 /* SDIO_CMD (IOCFG078) */ 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ @@ -368,7 +368,7 @@ pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - sdio_cfg_idle: sdio_cfg_idle { + sdio_cfg_idle: sdio-cfg-idle-pins { pinctrl-single,pins = < 0x138 0x0 /* SDIO_CMD (IOCFG078) */ 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ @@ -381,7 +381,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_func1: isp_cfg_func1 { + isp_cfg_func1: isp-cfg-func1-pins { pinctrl-single,pins = < 0x28 0x0 /* ISP_PWDN0 (IOCFG010) */ 0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */ @@ -403,7 +403,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_idle1: isp_cfg_idle1 { + isp_cfg_idle1: isp-cfg-idle1-pins { pinctrl-single,pins = < 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ @@ -413,7 +413,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - isp_cfg_func2: isp_cfg_func2 { + isp_cfg_func2: isp-cfg-func2-pins { pinctrl-single,pins = < 0x54 0x0 /* ISP_STROBE1 (IOCFG021) */ >; @@ -422,7 +422,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_clk_cfg_func: codec_clk_cfg_func { + codec_clk_cfg_func: codec-clk-cfg-pins { pinctrl-single,pins = < 0x70 0x0 /* CODEC_CLK (IOCFG028) */ >; @@ -430,7 +430,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - codec_clk_cfg_idle: codec_clk_cfg_idle { + codec_clk_cfg_idle: codec-clk-cfg-idle-pins { pinctrl-single,pins = < 0x70 0x0 /* CODEC_CLK (IOCFG028) */ >; @@ -439,7 +439,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_cfg_func1: codec_cfg_func1 { + codec_cfg_func1: codec-cfg-func1-pins { pinctrl-single,pins = < 0x74 0x0 /* DMIC_CLK (IOCFG029) */ >; @@ -448,7 +448,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - codec_cfg_func2: codec_cfg_func2 { + codec_cfg_func2: codec-cfg-func2-pins { pinctrl-single,pins = < 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ 0x7c 0x0 /* CODEC_DI (IOCFG031) */ @@ -458,7 +458,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - codec_cfg_idle2: codec_cfg_idle2 { + codec_cfg_idle2: codec-cfg-idle2-pins { pinctrl-single,pins = < 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ 0x7c 0x0 /* CODEC_DI (IOCFG031) */ @@ -469,7 +469,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - fm_cfg_func: fm_cfg_func { + fm_cfg_func: fm-cfg-pins { pinctrl-single,pins = < 0x84 0x0 /* FM_XCLK (IOCFG033) */ 0x88 0x0 /* FM_XFS (IOCFG034) */ @@ -481,7 +481,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bt_cfg_func: bt_cfg_func { + bt_cfg_func: bt-cfg-pins { pinctrl-single,pins = < 0x94 0x0 /* BT_XCLK (IOCFG037) */ 0x98 0x0 /* BT_XFS (IOCFG038) */ @@ -492,7 +492,7 @@ pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bt_cfg_idle: bt_cfg_idle { + bt_cfg_idle: bt-cfg-idle-pins { pinctrl-single,pins = < 0x94 0x0 /* BT_XCLK (IOCFG037) */ 0x98 0x0 /* BT_XFS (IOCFG038) */ @@ -504,7 +504,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - pwm_in_cfg_func: pwm_in_cfg_func { + pwm_in_cfg_func: pwm-in-cfg-pins { pinctrl-single,pins = < 0xbc 0x0 /* PWM_IN (IOCFG047) */ >; @@ -513,7 +513,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - bl_pwm_cfg_func: bl_pwm_cfg_func { + bl_pwm_cfg_func: bl-pwm-cfg-pins { pinctrl-single,pins = < 0xc0 0x0 /* BL_PWM (IOCFG048) */ >; @@ -522,7 +522,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart0_cfg_func1: uart0_cfg_func1 { + uart0_cfg_func1: uart0-cfg-func1-pins { pinctrl-single,pins = < 0xc4 0x0 /* UART0_RXD (IOCFG049) */ >; @@ -531,7 +531,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart0_cfg_func2: uart0_cfg_func2 { + uart0_cfg_func2: uart0-cfg-func2-pins { pinctrl-single,pins = < 0xc8 0x0 /* UART0_TXD (IOCFG050) */ >; @@ -540,7 +540,7 @@ pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; }; - uart1_cfg_func1: uart1_cfg_func1 { + uart1_cfg_func1: uart1-cfg-func1-pins { pinctrl-single,pins = < 0xcc 0x0 /* UART1_CTS_N (IOCFG051) */ 0xd4 0x0 /* UART1_RXD (IOCFG053) */ @@ -550,7 +550,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart1_cfg_func2: uart1_cfg_func2 { + uart1_cfg_func2: uart1-cfg-func2-pins { pinctrl-single,pins = < 0xd0 0x0 /* UART1_RTS_N (IOCFG052) */ 0xd8 0x0 /* UART1_TXD (IOCFG054) */ @@ -560,7 +560,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0xdc 0x0 /* UART2_CTS_N (IOCFG055) */ 0xe0 0x0 /* UART2_RTS_N (IOCFG056) */ @@ -572,7 +572,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x190 0x0 /* UART3_CTS_N (IOCFG100) */ 0x194 0x0 /* UART3_RTS_N (IOCFG101) */ @@ -584,7 +584,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */ 0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */ @@ -596,7 +596,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - uart5_cfg_func: uart5_cfg_func { + uart5_cfg_func: uart5-cfg-pins { pinctrl-single,pins = < 0x1d8 0x0 /* UART4_RXD (IOCFG118) */ 0x1dc 0x0 /* UART4_TXD (IOCFG119) */ @@ -606,7 +606,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0xec 0x0 /* I2C0_SCL (IOCFG059) */ 0xf0 0x0 /* I2C0_SDA (IOCFG060) */ @@ -616,7 +616,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0xf4 0x0 /* I2C1_SCL (IOCFG061) */ 0xf8 0x0 /* I2C1_SDA (IOCFG062) */ @@ -626,7 +626,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - i2c2_cfg_func: i2c2_cfg_func { + i2c2_cfg_func: i2c2-cfg-pins { pinctrl-single,pins = < 0xfc 0x0 /* I2C2_SCL (IOCFG063) */ 0x100 0x0 /* I2C2_SDA (IOCFG064) */ @@ -636,7 +636,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - spi0_cfg_func: spi0_cfg_func { + spi0_cfg_func: spi0-cfg-pins { pinctrl-single,pins = < 0x1b0 0x0 /* SPI0_DI (IOCFG108) */ 0x1b4 0x0 /* SPI0_DO (IOCFG109) */ @@ -656,7 +656,7 @@ &rstout_n_cfg_func >; - rstout_n_cfg_func: rstout_n_cfg_func { + rstout_n_cfg_func: rstout-n-cfg-pins { pinctrl-single,pins = < 0x0 0x0 /* RSTOUT_N (IOCFG000) */ >; @@ -665,7 +665,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - pmu_peri_en_cfg_func: pmu_peri_en_cfg_func { + pmu_peri_en_cfg_func: pmu-peri-en-cfg-pins { pinctrl-single,pins = < 0x4 0x0 /* PMU_PERI_EN (IOCFG001) */ >; @@ -674,7 +674,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - sysclk0_en_cfg_func: sysclk0_en_cfg_func { + sysclk0_en_cfg_func: sysclk0-en-cfg-pins { pinctrl-single,pins = < 0x8 0x0 /* SYSCLK0_EN (IOCFG002) */ >; @@ -683,7 +683,7 @@ pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; }; - jtag_tdo_cfg_func: jtag_tdo_cfg_func { + jtag_tdo_cfg_func: jtag-tdo-cfg-pins { pinctrl-single,pins = < 0xc 0x0 /* JTAG_TDO (IOCFG003) */ >; @@ -692,7 +692,7 @@ pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; }; - rf_reset_cfg_func: rf_reset_cfg_func { + rf_reset_cfg_func: rf-reset-cfg-pins { pinctrl-single,pins = < 0x70 0x0 /* RF_RESET0 (IOCFG028) */ 0x74 0x0 /* RF_RESET1 (IOCFG029) */ diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi index 920a3111c66d..b801a48041f9 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi @@ -25,7 +25,7 @@ &range 0 7 0 &range 8 116 0>; - pmu_pmx_func: pmu_pmx_func { + pmu_pmx_func: pmu-pins { pinctrl-single,pins = < 0x008 MUX_M1 /* PMU1_SSI */ 0x00c MUX_M1 /* PMU2_SSI */ @@ -34,19 +34,19 @@ >; }; - csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func { + csi0_pwd_n_pmx_func: csi0-pwd-n-pins { pinctrl-single,pins = < 0x044 MUX_M0 /* CSI0_PWD_N */ >; }; - csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func { + csi1_pwd_n_pmx_func: csi1-pwd-n-pins { pinctrl-single,pins = < 0x04c MUX_M0 /* CSI1_PWD_N */ >; }; - isp0_pmx_func: isp0_pmx_func { + isp0_pmx_func: isp0-pins { pinctrl-single,pins = < 0x058 MUX_M1 /* ISP_CLK0 */ 0x064 MUX_M1 /* ISP_SCL0 */ @@ -54,7 +54,7 @@ >; }; - isp1_pmx_func: isp1_pmx_func { + isp1_pmx_func: isp1-pins { pinctrl-single,pins = < 0x05c MUX_M1 /* ISP_CLK1 */ 0x06c MUX_M1 /* ISP_SCL1 */ @@ -62,47 +62,47 @@ >; }; - pwr_key_pmx_func: pwr_key_pmx_func { + pwr_key_pmx_func: pwr-key-pins { pinctrl-single,pins = < 0x080 MUX_M0 /* GPIO_034 */ >; }; - i2c3_pmx_func: i2c3_pmx_func { + i2c3_pmx_func: i2c3-pins { pinctrl-single,pins = < 0x02c MUX_M1 /* I2C3_SCL */ 0x030 MUX_M1 /* I2C3_SDA */ >; }; - i2c4_pmx_func: i2c4_pmx_func { + i2c4_pmx_func: i2c4-pins { pinctrl-single,pins = < 0x090 MUX_M1 /* I2C4_SCL */ 0x094 MUX_M1 /* I2C4_SDA */ >; }; - pcie_perstn_pmx_func: pcie_perstn_pmx_func { + pcie_perstn_pmx_func: pcie-perstn-pins { pinctrl-single,pins = < 0x15c MUX_M1 /* PCIE_PERST_N */ >; }; - usbhub5734_pmx_func: usbhub5734_pmx_func { + usbhub5734_pmx_func: usbhub5734-pins { pinctrl-single,pins = < 0x11c MUX_M0 /* GPIO_073 */ 0x120 MUX_M0 /* GPIO_074 */ >; }; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0x0cc MUX_M2 /* UART0_RXD */ 0x0d0 MUX_M2 /* UART0_TXD */ >; }; - uart1_pmx_func: uart1_pmx_func { + uart1_pmx_func: uart1-pins { pinctrl-single,pins = < 0x0b0 MUX_M2 /* UART1_CTS_N */ 0x0b4 MUX_M2 /* UART1_RTS_N */ @@ -111,7 +111,7 @@ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0x0bc MUX_M2 /* UART2_CTS_N */ 0x0c0 MUX_M2 /* UART2_RTS_N */ @@ -120,7 +120,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x0dc MUX_M1 /* UART3_CTS_N */ 0x0e0 MUX_M1 /* UART3_RTS_N */ @@ -129,7 +129,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x0ec MUX_M1 /* UART4_CTS_N */ 0x0f0 MUX_M1 /* UART4_RTS_N */ @@ -138,7 +138,7 @@ >; }; - uart5_pmx_func: uart5_pmx_func { + uart5_pmx_func: uart5-pins { pinctrl-single,pins = < 0x0c4 MUX_M3 /* UART5_CTS_N */ 0x0c8 MUX_M3 /* UART5_RTS_N */ @@ -147,7 +147,7 @@ >; }; - uart6_pmx_func: uart6_pmx_func { + uart6_pmx_func: uart6-pins { pinctrl-single,pins = < 0x0cc MUX_M1 /* UART6_CTS_N */ 0x0d0 MUX_M1 /* UART6_RTS_N */ @@ -156,13 +156,13 @@ >; }; - cam0_rst_pmx_func: cam0_rst_pmx_func { + cam0_rst_pmx_func: cam0-rst-pins { pinctrl-single,pins = < 0x0c8 MUX_M0 /* CAM0_RST */ >; }; - cam1_rst_pmx_func: cam1_rst_pmx_func { + cam1_rst_pmx_func: cam1-rst-pins { pinctrl-single,pins = < 0x124 MUX_M0 /* CAM1_RST */ >; @@ -180,7 +180,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 6 0>; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SD_CLK */ 0x004 MUX_M1 /* SD_CMD */ @@ -203,14 +203,14 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; - ufs_pmx_func: ufs_pmx_func { + ufs_pmx_func: ufs-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* UFS_REF_CLK */ 0x004 MUX_M1 /* UFS_RST_N */ >; }; - spi3_pmx_func: spi3_pmx_func { + spi3_pmx_func: spi3-pins { pinctrl-single,pins = < 0x008 MUX_M1 /* SPI3_CLK */ 0x00c MUX_M1 /* SPI3_DI */ @@ -231,7 +231,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 6 0>; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SDIO_CLK */ 0x004 MUX_M1 /* SDIO_CMD */ @@ -254,7 +254,7 @@ /* pin base in node, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 42 0>; - i2s2_pmx_func: i2s2_pmx_func { + i2s2_pmx_func: i2s2-pins { pinctrl-single,pins = < 0x044 MUX_M1 /* I2S2_DI */ 0x048 MUX_M1 /* I2S2_DO */ @@ -263,42 +263,42 @@ >; }; - slimbus_pmx_func: slimbus_pmx_func { + slimbus_pmx_func: slimbus-pins { pinctrl-single,pins = < 0x02c MUX_M1 /* SLIMBUS_CLK */ 0x030 MUX_M1 /* SLIMBUS_DATA */ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0x014 MUX_M1 /* I2C0_SCL */ 0x018 MUX_M1 /* I2C0_SDA */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x01c MUX_M1 /* I2C1_SCL */ 0x020 MUX_M1 /* I2C1_SDA */ >; }; - i2c7_pmx_func: i2c7_pmx_func { + i2c7_pmx_func: i2c7-pins { pinctrl-single,pins = < 0x024 MUX_M3 /* I2C7_SCL */ 0x028 MUX_M3 /* I2C7_SDA */ >; }; - pcie_pmx_func: pcie_pmx_func { + pcie_pmx_func: pcie-pins { pinctrl-single,pins = < 0x084 MUX_M1 /* PCIE_CLKREQ_N */ 0x088 MUX_M1 /* PCIE_WAKE_N */ >; }; - spi2_pmx_func: spi2_pmx_func { + spi2_pmx_func: spi2-pins { pinctrl-single,pins = < 0x08c MUX_M1 /* SPI2_CLK */ 0x090 MUX_M1 /* SPI2_DI */ @@ -307,7 +307,7 @@ >; }; - i2s0_pmx_func: i2s0_pmx_func { + i2s0_pmx_func: i2s0-pins { pinctrl-single,pins = < 0x034 MUX_M1 /* I2S0_DI */ 0x038 MUX_M1 /* I2S0_DO */ @@ -323,7 +323,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - pmu_cfg_func: pmu_cfg_func { + pmu_cfg_func: pmu-cfg-pins { pinctrl-single,pins = < 0x010 0x0 /* PMU1_SSI */ 0x014 0x0 /* PMU2_SSI */ @@ -347,7 +347,7 @@ >; }; - i2c3_cfg_func: i2c3_cfg_func { + i2c3_cfg_func: i2c3-cfg-pins { pinctrl-single,pins = < 0x038 0x0 /* I2C3_SCL */ 0x03c 0x0 /* I2C3_SDA */ @@ -369,7 +369,7 @@ >; }; - csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func { + csi0_pwd_n_cfg_func: csi0-pwd-n-cfg-pins { pinctrl-single,pins = < 0x050 0x0 /* CSI0_PWD_N */ >; @@ -390,7 +390,7 @@ >; }; - csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func { + csi1_pwd_n_cfg_func: csi1-pwd-n-cfg-pins { pinctrl-single,pins = < 0x058 0x0 /* CSI1_PWD_N */ >; @@ -411,7 +411,7 @@ >; }; - isp0_cfg_func: isp0_cfg_func { + isp0_cfg_func: isp0-cfg-pins { pinctrl-single,pins = < 0x064 0x0 /* ISP_CLK0 */ 0x070 0x0 /* ISP_SCL0 */ @@ -433,7 +433,7 @@ DRIVE7_04MA DRIVE6_MASK>; }; - isp1_cfg_func: isp1_cfg_func { + isp1_cfg_func: isp1-cfg-pins { pinctrl-single,pins = < 0x068 0x0 /* ISP_CLK1 */ 0x078 0x0 /* ISP_SCL1 */ @@ -456,7 +456,7 @@ >; }; - pwr_key_cfg_func: pwr_key_cfg_func { + pwr_key_cfg_func: pwr-key-cfg-pins { pinctrl-single,pins = < 0x08c 0x0 /* GPIO_034 */ >; @@ -477,7 +477,7 @@ >; }; - uart1_cfg_func: uart1_cfg_func { + uart1_cfg_func: uart1-cfg-pins { pinctrl-single,pins = < 0x0b4 0x0 /* UART1_RXD */ 0x0b8 0x0 /* UART1_TXD */ @@ -501,7 +501,7 @@ >; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* UART2_CTS_N */ 0x0cc 0x0 /* UART2_RTS_N */ @@ -525,7 +525,7 @@ >; }; - uart5_cfg_func: uart5_cfg_func { + uart5_cfg_func: uart5-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* UART5_RXD */ 0x0cc 0x0 /* UART5_TXD */ @@ -549,7 +549,7 @@ >; }; - cam0_rst_cfg_func: cam0_rst_cfg_func { + cam0_rst_cfg_func: cam0-rst-cfg-pins { pinctrl-single,pins = < 0x0d4 0x0 /* CAM0_RST */ >; @@ -570,7 +570,7 @@ >; }; - uart0_cfg_func: uart0_cfg_func { + uart0_cfg_func: uart0-cfg-pins { pinctrl-single,pins = < 0x0d8 0x0 /* UART0_RXD */ 0x0dc 0x0 /* UART0_TXD */ @@ -592,7 +592,7 @@ >; }; - uart6_cfg_func: uart6_cfg_func { + uart6_cfg_func: uart6-cfg-pins { pinctrl-single,pins = < 0x0d8 0x0 /* UART6_CTS_N */ 0x0dc 0x0 /* UART6_RTS_N */ @@ -616,7 +616,7 @@ >; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x0e8 0x0 /* UART3_CTS_N */ 0x0ec 0x0 /* UART3_RTS_N */ @@ -640,7 +640,7 @@ >; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x0f8 0x0 /* UART4_CTS_N */ 0x0fc 0x0 /* UART4_RTS_N */ @@ -664,7 +664,7 @@ >; }; - cam1_rst_cfg_func: cam1_rst_cfg_func { + cam1_rst_cfg_func: cam1-rst-cfg-pins { pinctrl-single,pins = < 0x130 0x0 /* CAM1_RST */ >; @@ -692,7 +692,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - ufs_cfg_func: ufs_cfg_func { + ufs_cfg_func: ufs-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* UFS_REF_CLK */ 0x004 0x0 /* UFS_RST_N */ @@ -714,7 +714,7 @@ >; }; - spi3_cfg_func: spi3_cfg_func { + spi3_cfg_func: spi3-cfg-pins { pinctrl-single,pins = < 0x008 0x0 /* SPI3_CLK */ 0x00c 0x0 /* SPI3_DI */ @@ -745,7 +745,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SDIO_CLK */ >; @@ -766,7 +766,7 @@ >; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SDIO_CMD */ 0x008 0x0 /* SDIO_DATA0 */ @@ -798,7 +798,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SD_CLK */ >; @@ -820,7 +820,7 @@ >; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SD_CMD */ 0x008 0x0 /* SD_DATA0 */ @@ -853,7 +853,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0x01c 0x0 /* I2C0_SCL */ 0x020 0x0 /* I2C0_SDA */ @@ -875,7 +875,7 @@ >; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0x024 0x0 /* I2C1_SCL */ 0x028 0x0 /* I2C1_SDA */ @@ -897,7 +897,7 @@ >; }; - i2c7_cfg_func: i2c7_cfg_func { + i2c7_cfg_func: i2c7-cfg-pins { pinctrl-single,pins = < 0x02c 0x0 /* I2C7_SCL */ 0x030 0x0 /* I2C7_SDA */ @@ -919,7 +919,7 @@ >; }; - slimbus_cfg_func: slimbus_cfg_func { + slimbus_cfg_func: slimbus-cfg-pins { pinctrl-single,pins = < 0x034 0x0 /* SLIMBUS_CLK */ 0x038 0x0 /* SLIMBUS_DATA */ @@ -941,7 +941,7 @@ >; }; - i2s0_cfg_func: i2s0_cfg_func { + i2s0_cfg_func: i2s0-cfg-pins { pinctrl-single,pins = < 0x040 0x0 /* I2S0_DI */ 0x044 0x0 /* I2S0_DO */ @@ -965,7 +965,7 @@ >; }; - i2s2_cfg_func: i2s2_cfg_func { + i2s2_cfg_func: i2s2-cfg-pins { pinctrl-single,pins = < 0x050 0x0 /* I2S2_DI */ 0x054 0x0 /* I2S2_DO */ @@ -989,7 +989,7 @@ >; }; - pcie_cfg_func: pcie_cfg_func { + pcie_cfg_func: pcie-cfg-pins { pinctrl-single,pins = < 0x094 0x0 /* PCIE_CLKREQ_N */ 0x098 0x0 /* PCIE_WAKE_N */ @@ -1011,7 +1011,7 @@ >; }; - spi2_cfg_func: spi2_cfg_func { + spi2_cfg_func: spi2-cfg-pins { pinctrl-single,pins = < 0x09c 0x0 /* SPI2_CLK */ 0x0a0 0x0 /* SPI2_DI */ @@ -1035,7 +1035,7 @@ >; }; - usb_cfg_func: usb_cfg_func { + usb_cfg_func: usb-cfg-pins { pinctrl-single,pins = < 0x0ac 0x0 /* GPIO_219 */ >; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index 77bd8c3a8314..8f7bf80e6ece 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -21,14 +21,14 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 82 0>; - uart0_pmx_func: uart0_pmx_func { + uart0_pmx_func: uart0-pins { pinctrl-single,pins = < 0x054 MUX_M2 /* UART0_RXD */ 0x058 MUX_M2 /* UART0_TXD */ >; }; - uart2_pmx_func: uart2_pmx_func { + uart2_pmx_func: uart2-pins { pinctrl-single,pins = < 0x700 MUX_M2 /* UART2_CTS_N */ 0x704 MUX_M2 /* UART2_RTS_N */ @@ -37,7 +37,7 @@ >; }; - uart3_pmx_func: uart3_pmx_func { + uart3_pmx_func: uart3-pins { pinctrl-single,pins = < 0x064 MUX_M1 /* UART3_CTS_N */ 0x068 MUX_M1 /* UART3_RTS_N */ @@ -46,7 +46,7 @@ >; }; - uart4_pmx_func: uart4_pmx_func { + uart4_pmx_func: uart4-pins { pinctrl-single,pins = < 0x074 MUX_M1 /* UART4_CTS_N */ 0x078 MUX_M1 /* UART4_RTS_N */ @@ -55,52 +55,52 @@ >; }; - uart6_pmx_func: uart6_pmx_func { + uart6_pmx_func: uart6-pins { pinctrl-single,pins = < 0x05c MUX_M1 /* UART6_RXD */ 0x060 MUX_M1 /* UART6_TXD */ >; }; - i2c3_pmx_func: i2c3_pmx_func { + i2c3_pmx_func: i2c3-pins { pinctrl-single,pins = < 0x010 MUX_M1 /* I2C3_SCL */ 0x014 MUX_M1 /* I2C3_SDA */ >; }; - i2c4_pmx_func: i2c4_pmx_func { + i2c4_pmx_func: i2c4-pins { pinctrl-single,pins = < 0x03c MUX_M1 /* I2C4_SCL */ 0x040 MUX_M1 /* I2C4_SDA */ >; }; - cam0_rst_pmx_func: cam0_rst_pmx_func { + cam0_rst_pmx_func: cam0-rst-pins { pinctrl-single,pins = < 0x714 MUX_M0 /* CAM0_RST */ >; }; - cam1_rst_pmx_func: cam1_rst_pmx_func { + cam1_rst_pmx_func: cam1-rst-pins { pinctrl-single,pins = < 0x048 MUX_M0 /* CAM1_RST */ >; }; - cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func { + cam0_pwd_n_pmx_func: cam0-pwd-n-pins { pinctrl-single,pins = < 0x098 MUX_M0 /* CAM0_PWD_N */ >; }; - cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func { + cam1_pwd_n_pmx_func: cam1-pwd-n-pins { pinctrl-single,pins = < 0x044 MUX_M0 /* CAM1_PWD_N */ >; }; - isp0_pmx_func: isp0_pmx_func { + isp0_pmx_func: isp0-pins { pinctrl-single,pins = < 0x018 MUX_M1 /* ISP_CLK0 */ 0x024 MUX_M1 /* ISP_SCL0 */ @@ -108,7 +108,7 @@ >; }; - isp1_pmx_func: isp1_pmx_func { + isp1_pmx_func: isp1-pins { pinctrl-single,pins = < 0x01c MUX_M1 /* ISP_CLK1 */ 0x02c MUX_M1 /* ISP_SCL1 */ @@ -127,19 +127,19 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 46 0>; - pwr_key_pmx_func: pwr_key_pmx_func { + pwr_key_pmx_func: pwr-key-pins { pinctrl-single,pins = < 0x064 MUX_M0 /* GPIO_203 */ >; }; - pd_pmx_func: pd_pmx_func{ + pd_pmx_func: pd-pins { pinctrl-single,pins = < 0x080 MUX_M0 /* GPIO_221 */ >; }; - i2s2_pmx_func: i2s2_pmx_func { + i2s2_pmx_func: i2s2-pins { pinctrl-single,pins = < 0x050 MUX_M1 /* I2S2_DI */ 0x054 MUX_M1 /* I2S2_DO */ @@ -148,7 +148,7 @@ >; }; - spi0_pmx_func: spi0_pmx_func { + spi0_pmx_func: spi0-pins { pinctrl-single,pins = < 0x094 MUX_M1 /* SPI0_CLK */ 0x098 MUX_M1 /* SPI0_DI */ @@ -157,7 +157,7 @@ >; }; - spi2_pmx_func: spi2_pmx_func { + spi2_pmx_func: spi2-pins { pinctrl-single,pins = < 0x710 MUX_M1 /* SPI2_CLK */ 0x714 MUX_M1 /* SPI2_DI */ @@ -166,7 +166,7 @@ >; }; - spi3_pmx_func: spi3_pmx_func { + spi3_pmx_func: spi3-pins { pinctrl-single,pins = < 0x72c MUX_M1 /* SPI3_CLK */ 0x730 MUX_M1 /* SPI3_DI */ @@ -175,37 +175,37 @@ >; }; - i2c0_pmx_func: i2c0_pmx_func { + i2c0_pmx_func: i2c0-pins { pinctrl-single,pins = < 0x020 MUX_M1 /* I2C0_SCL */ 0x024 MUX_M1 /* I2C0_SDA */ >; }; - i2c1_pmx_func: i2c1_pmx_func { + i2c1_pmx_func: i2c1-pins { pinctrl-single,pins = < 0x028 MUX_M1 /* I2C1_SCL */ 0x02c MUX_M1 /* I2C1_SDA */ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c2_pmx_func: i2c2-pins { pinctrl-single,pins = < 0x030 MUX_M1 /* I2C2_SCL */ 0x034 MUX_M1 /* I2C2_SDA */ >; }; - pcie_clkreq_pmx_func: pcie_clkreq_pmx_func { + pcie_clkreq_pmx_func: pcie-clkreq-pins { pinctrl-single,pins = < 0x084 MUX_M1 /* PCIE0_CLKREQ_N */ >; }; - gpio185_pmx_func: gpio185_pmx_func { + gpio185_pmx_func: gpio185-pins { pinctrl-single,pins = <0x01C 0x1>; }; - gpio185_pmx_idle: gpio185_pmx_idle { + gpio185_pmx_idle: gpio185-idle-pins { pinctrl-single,pins = <0x01C 0x0>; }; }; @@ -216,7 +216,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - uart0_cfg_func: uart0_cfg_func { + uart0_cfg_func: uart0-cfg-pins { pinctrl-single,pins = < 0x058 0x0 /* UART0_RXD */ 0x05c 0x0 /* UART0_TXD */ @@ -238,7 +238,7 @@ >; }; - uart2_cfg_func: uart2_cfg_func { + uart2_cfg_func: uart2-cfg-pins { pinctrl-single,pins = < 0x700 0x0 /* UART2_CTS_N */ 0x704 0x0 /* UART2_RTS_N */ @@ -262,7 +262,7 @@ >; }; - uart3_cfg_func: uart3_cfg_func { + uart3_cfg_func: uart3-cfg-pins { pinctrl-single,pins = < 0x068 0x0 /* UART3_CTS_N */ 0x06c 0x0 /* UART3_RTS_N */ @@ -286,7 +286,7 @@ >; }; - uart4_cfg_func: uart4_cfg_func { + uart4_cfg_func: uart4-cfg-pins { pinctrl-single,pins = < 0x078 0x0 /* UART4_CTS_N */ 0x07c 0x0 /* UART4_RTS_N */ @@ -310,7 +310,7 @@ >; }; - uart6_cfg_func: uart6_cfg_func { + uart6_cfg_func: uart6-cfg-pins { pinctrl-single,pins = < 0x060 0x0 /* UART6_RXD */ 0x064 0x0 /* UART6_TXD */ @@ -332,7 +332,7 @@ >; }; - i2c3_cfg_func: i2c3_cfg_func { + i2c3_cfg_func: i2c3-cfg-pins { pinctrl-single,pins = < 0x014 0x0 /* I2C3_SCL */ 0x018 0x0 /* I2C3_SDA */ @@ -354,7 +354,7 @@ >; }; - i2c4_cfg_func: i2c4_cfg_func { + i2c4_cfg_func: i2c4-cfg-pins { pinctrl-single,pins = < 0x040 0x0 /* I2C4_SCL */ 0x044 0x0 /* I2C4_SDA */ @@ -376,7 +376,7 @@ >; }; - cam0_rst_cfg_func: cam0_rst_cfg_func { + cam0_rst_cfg_func: cam0-rst-cfg-pins { pinctrl-single,pins = < 0x714 0x0 /* CAM0_RST */ >; @@ -397,7 +397,7 @@ >; }; - cam1_rst_cfg_func: cam1_rst_cfg_func { + cam1_rst_cfg_func: cam1-rst-cfg-pins { pinctrl-single,pins = < 0x04C 0x0 /* CAM1_RST */ >; @@ -418,7 +418,7 @@ >; }; - cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func { + cam0_pwd_n_cfg_func: cam0-pwd-n-cfg-pins { pinctrl-single,pins = < 0x09C 0x0 /* CAM0_PWD_N */ >; @@ -439,7 +439,7 @@ >; }; - cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func { + cam1_pwd_n_cfg_func: cam1-pwd-n-cfg-pins { pinctrl-single,pins = < 0x048 0x0 /* CAM1_PWD_N */ >; @@ -460,7 +460,7 @@ >; }; - isp0_cfg_func: isp0_cfg_func { + isp0_cfg_func: isp0-cfg-pins { pinctrl-single,pins = < 0x01C 0x0 /* ISP_CLK0 */ 0x028 0x0 /* ISP_SCL0 */ @@ -483,7 +483,7 @@ >; }; - isp1_cfg_func: isp1_cfg_func { + isp1_cfg_func: isp1-cfg-pins { pinctrl-single,pins = < 0x020 0x0 /* ISP_CLK1 */ 0x030 0x0 /* ISP_SCL1 */ @@ -517,7 +517,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 10 0>; - sdio_pmx_func: sdio_pmx_func { + sdio_pmx_func: sdio-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SDIO_CLK */ 0x004 MUX_M1 /* SDIO_CMD */ @@ -535,7 +535,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sdio_clk_cfg_func: sdio_clk_cfg_func { + sdio_clk_cfg_func: sdio-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SDIO_CLK */ >; @@ -556,7 +556,7 @@ >; }; - sdio_cfg_func: sdio_cfg_func { + sdio_cfg_func: sdio-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SDIO_CMD */ 0x008 0x0 /* SDIO_DATA0 */ @@ -592,7 +592,7 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; - sd_pmx_func: sd_pmx_func { + sd_pmx_func: sd-pins { pinctrl-single,pins = < 0x000 MUX_M1 /* SD_CLK */ 0x004 MUX_M1 /* SD_CMD */ @@ -610,7 +610,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - sd_clk_cfg_func: sd_clk_cfg_func { + sd_clk_cfg_func: sd-clk-cfg-pins { pinctrl-single,pins = < 0x000 0x0 /* SD_CLK */ >; @@ -632,7 +632,7 @@ >; }; - sd_cfg_func: sd_cfg_func { + sd_cfg_func: sd-cfg-pins { pinctrl-single,pins = < 0x004 0x0 /* SD_CMD */ 0x008 0x0 /* SD_DATA0 */ @@ -665,7 +665,7 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; - pwr_key_cfg_func: pwr_key_cfg_func { + pwr_key_cfg_func: pwr-key-cfg-pins { pinctrl-single,pins = < 0x090 0x0 /* GPIO_203 */ >; @@ -686,7 +686,7 @@ >; }; - usb_cfg_func: usb_cfg_func { + usb_cfg_func: usb-cfg-pins { pinctrl-single,pins = < 0x0AC 0x0 /* GPIO_221 */ >; @@ -707,7 +707,7 @@ >; }; - spi0_cfg_func: spi0_cfg_func { + spi0_cfg_func: spi0-cfg-pins { pinctrl-single,pins = < 0x0c8 0x0 /* SPI0_DI */ 0x0cc 0x0 /* SPI0_DO */ @@ -730,7 +730,7 @@ >; }; - spi2_cfg_func: spi2_cfg_func { + spi2_cfg_func: spi2-cfg-pins { pinctrl-single,pins = < 0x714 0x0 /* SPI2_DI */ 0x718 0x0 /* SPI2_DO */ @@ -753,7 +753,7 @@ >; }; - spi3_cfg_func: spi3_cfg_func { + spi3_cfg_func: spi3-cfg-pins { pinctrl-single,pins = < 0x730 0x0 /* SPI3_DI */ 0x734 0x0 /* SPI3_DO */ @@ -776,7 +776,7 @@ >; }; - spi0_clk_cfg_func: spi0_clk_cfg_func { + spi0_clk_cfg_func: spi0-clk-cfg-pins { pinctrl-single,pins = < 0x0c4 0x0 /* SPI0_CLK */ >; @@ -797,7 +797,7 @@ >; }; - spi2_clk_cfg_func: spi2_clk_cfg_func { + spi2_clk_cfg_func: spi2-clk-cfg-pins { pinctrl-single,pins = < 0x710 0x0 /* SPI2_CLK */ >; @@ -818,7 +818,7 @@ >; }; - spi3_clk_cfg_func: spi3_clk_cfg_func { + spi3_clk_cfg_func: spi3-clk-cfg-pins { pinctrl-single,pins = < 0x72c 0x0 /* SPI3_CLK */ >; @@ -839,7 +839,7 @@ >; }; - i2c0_cfg_func: i2c0_cfg_func { + i2c0_cfg_func: i2c0-cfg-pins { pinctrl-single,pins = < 0x04c 0x0 /* I2C0_SCL */ 0x050 0x0 /* I2C0_SDA */ @@ -861,7 +861,7 @@ >; }; - i2c1_cfg_func: i2c1_cfg_func { + i2c1_cfg_func: i2c1-cfg-pins { pinctrl-single,pins = < 0x054 0x0 /* I2C1_SCL */ 0x058 0x0 /* I2C1_SDA */ @@ -883,7 +883,7 @@ >; }; - i2c2_cfg_func: i2c2_cfg_func { + i2c2_cfg_func: i2c2-cfg-pins { pinctrl-single,pins = < 0x05c 0x0 /* I2C2_SCL */ 0x060 0x0 /* I2C2_SDA */ @@ -905,7 +905,7 @@ >; }; - pcie_clkreq_cfg_func: pcie_clkreq_cfg_func { + pcie_clkreq_cfg_func: pcie-clkreq-cfg-pins { pinctrl-single,pins = < 0x0b0 0x0 >; @@ -925,7 +925,7 @@ DRIVE7_06MA DRIVE6_MASK >; }; - i2s2_cfg_func: i2s2_cfg_func { + i2s2_cfg_func: i2s2-cfg-pins { pinctrl-single,pins = < 0x07c 0x0 /* I2S2_DI */ 0x080 0x0 /* I2S2_DO */ @@ -949,7 +949,7 @@ >; }; - gpio185_cfg_func: gpio185_cfg_func { + gpio185_cfg_func: gpio185-cfg-pins { pinctrl-single,pins = <0x048 0>; pinctrl-single,bias-pulldown = <0 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; @@ -957,7 +957,7 @@ pinctrl-single,slew-rate = <0x0 0x80>; }; - gpio185_cfg_idle: gpio185_cfg_idle { + gpio185_cfg_idle: gpio185-cfg-idle-pins { pinctrl-single,pins = <0x048 0>; pinctrl-single,bias-pulldown = <2 2 0 2>; pinctrl-single,bias-pullup = <0 1 0 1>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 5b2b1bfd0d2a..65ddc0698f82 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -212,21 +212,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 291c2ee38288..c588848bfdeb 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -212,21 +212,25 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 8a9436ca2531..595abe339c5d 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -843,81 +843,97 @@ cluster0_l2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster1_l2: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster2_l2: l2-cache2 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster3_l2: l2-cache3 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster4_l2: l2-cache4 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster5_l2: l2-cache5 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster6_l2: l2-cache6 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster7_l2: l2-cache7 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster8_l2: l2-cache8 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster9_l2: l2-cache9 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster10_l2: l2-cache10 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster11_l2: l2-cache11 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster12_l2: l2-cache12 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster13_l2: l2-cache13 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster14_l2: l2-cache14 { compatible = "cache"; cache-level = <2>; + cache-unified; }; cluster15_l2: l2-cache15 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 0367a00a269b..4996499cc738 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -24,7 +24,7 @@ }; cpus { - #address-cells = <2>; + #address-cells = <1>; #size-cells = <0>; cpu-map { cluster0 { @@ -39,19 +39,21 @@ cpu0: cpu@0 { compatible = "arm,cortex-a53"; device_type = "cpu"; - reg = <0x0 0x0>; + reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { compatible = "arm,cortex-a53"; device_type = "cpu"; - reg = <0x0 0x1>; + reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -61,7 +63,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - psci { + psci: psci { compatible = "arm,psci-0.2"; method = "smc"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index ed94a80bf05f..f3e226de5e5e 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -325,69 +325,69 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_22"; function = "twi_scl_m"; output-high; }; - i2cmux_6: i2cmux-6 { + i2cmux_6: i2cmux-6-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_7: i2cmux-7 { + i2cmux_7: i2cmux-7-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_8: i2cmux-8 { + i2cmux_8: i2cmux-8-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_9: i2cmux-9 { + i2cmux_9: i2cmux-9-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; }; - i2cmux_10: i2cmux-10 { + i2cmux_10: i2cmux-10-pins { pins = "GPIO_56"; function = "twi_scl_m"; output-high; }; - i2cmux_11: i2cmux-11 { + i2cmux_11: i2cmux-11-pins { pins = "GPIO_57"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 0760cf2e48bc..82ce007d9959 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -59,28 +59,28 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_35", "GPIO_36", "GPIO_50", "GPIO_51"; function = "twi_scl_m"; output-low; }; - i2cmux_s29: i2cmux-0 { + i2cmux_s29: i2cmux-0-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_s30: i2cmux-1 { + i2cmux_s30: i2cmux-1-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_s31: i2cmux-2 { + i2cmux_s31: i2cmux-2-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_s32: i2cmux-3 { + i2cmux_s32: i2cmux-3-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi index 9d1a082de3e2..32bb76b3202a 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi @@ -6,6 +6,18 @@ /dts-v1/; #include "sparx5.dtsi" +&psci { + status = "disabled"; +}; + +&cpu0 { + enable-method = "spin-table"; +}; + +&cpu1 { + enable-method = "spin-table"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 1406d5d40b8f..c38c809fe577 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,7 +9,9 @@ DTC_FLAGS_tegra194-p2972-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ +DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ +DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -25,4 +27,6 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index d7d7c63e62e2..5a1ce432c1fb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -36,6 +36,11 @@ }; }; + gpu@57000000 { + vdd-supply = <&max77621_gpu>; + status = "okay"; + }; + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1370,11 +1375,27 @@ maxim,dvs-default-state = <1>; maxim,enable-active-discharge; maxim,enable-bias-control; - maxim,enable-etr; maxim,enable-gpio = <&pmic 5 0>; maxim,externally-enable; }; + max77621_gpu: regulator@1c { + compatible = "maxim,max77621"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(A, 6) IRQ_TYPE_LEVEL_LOW>; + regulator-min-microvolt = <840000>; + regulator-max-microvolt = <1150000>; + regulator-name = "PPVAR_GPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,disable-etr; + maxim,enable-gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + maxim,externally-enable; + }; + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 0e463b3cbe01..617583ff2736 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -2000,6 +2000,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index 2378da324273..319b3a9cff24 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -126,7 +126,7 @@ regulator-name = "VDD_3V3_PCIE"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; regulator-boot-on; enable-active-high; }; @@ -139,4 +139,26 @@ gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; regulator-boot-on; }; + + thermal-zones { + tj-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; + status = "okay"; + + trips { + tj_trip_active0: active-0 { + temperature = <75000>; + hysteresis = <4000>; + type = "active"; + }; + + tj_trip_active1: active-1 { + temperature = <95000>; + hysteresis = <4000>; + type = "active"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi new file mode 100644 index 000000000000..e468352b8b7f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234.dtsi" + +/ { + compatible = "nvidia,p3701-0008", "nvidia,tegra234"; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + i2c@c240000 { + status = "okay"; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + thermal-sensor@4c { + status = "okay"; + reg = <0x4c>; + vcc-supply = <&vdd_1v8_ao>; + }; + }; + + thermal { + status = "okay"; + }; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "vdd-AO-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index caa9e952a149..cd13cf2381dd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2096,7 +2096,8 @@ ports { usb2-0 { - mode = "host"; + mode = "otg"; + usb-role-switch; status = "okay"; port { hs_typec_p1: endpoint { @@ -2152,6 +2153,14 @@ }; }; + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + usb@3610000 { status = "okay"; @@ -2238,6 +2247,7 @@ i2c@c240000 { status = "okay"; + typec@8 { compatible = "cypress,cypd4226"; reg = <0x08>; @@ -2245,22 +2255,27 @@ interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>; firmware-name = "nvidia,jetson-agx-xavier"; status = "okay"; + #address-cells = <1>; #size-cells = <0>; + ccg_typec_con0: connector@0 { compatible = "usb-c-connector"; reg = <0>; label = "USB-C"; data-role = "host"; + ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; hs_ucsi_ccg_p0: endpoint { remote-endpoint = <&hs_typec_p0>; }; }; + port@1 { reg = <1>; ss_ucsi_ccg_p0: endpoint { @@ -2269,20 +2284,24 @@ }; }; }; + ccg_typec_con1: connector@1 { compatible = "usb-c-connector"; reg = <1>; label = "USB-C"; data-role = "dual"; + ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; hs_ucsi_ccg_p1: endpoint { remote-endpoint = <&hs_typec_p1>; }; }; + port@1 { reg = <1>; ss_ucsi_ccg_p1: endpoint { @@ -2324,11 +2343,7 @@ }; pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - - cooling-levels = <0 95 178 255>; - #cooling-cells = <2>; + cooling-levels = <66 215 255>; }; serial { @@ -2336,9 +2351,8 @@ }; sound { - status = "okay"; - compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; dais = /* ADMAIF (FE) Ports */ <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, @@ -2415,4 +2429,20 @@ "CVB-RT DMIC1", "CVB-RT MIC", "CVB-RT DMIC2", "CVB-RT MIC"; }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi index 022a5408d869..d94147f22ebf 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi @@ -33,6 +33,12 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + #cooling-cells = <2>; + }; + vdd_1v8_sys: regulator-vdd-1v8-sys { compatible = "regulator-fixed"; regulator-name = "VDD_1V8_SYS"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts new file mode 100644 index 000000000000..43d797e5544f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> +#include "tegra234-p3701-0008.dtsi" +#include "tegra234-p3740-0002.dtsi" + +/ { + model = "NVIDIA IGX Orin Development Kit"; + compatible = "nvidia,p3740-0002+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + host1x@13e00000 { + nvdec@15480000 { + status = "okay"; + }; + }; + + pcie@140e0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_gbe_4>, <&p2u_gbe_5>; + phy-names = "p2u-0", "p2u-1"; + }; + + pcie@14100000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + pcie@14160000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + phys = <&p2u_hsio_7>, <&p2u_hsio_6>, <&p2u_hsio_5>, + <&p2u_hsio_4>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie@141e0000 { + status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + + aconnect@2900000 { + status = "okay"; + }; + + serial@3100000 { + compatible = "nvidia,tegra194-hsuart"; + status = "okay"; + }; + + i2c@3160000 { + status = "okay"; + }; + + i2c@3180000 { + status = "okay"; + }; + + i2c@3190000 { + status = "okay"; + }; + + i2c@31b0000 { + status = "okay"; + }; + + i2c@31c0000 { + status = "okay"; + + }; + + i2c@31e0000 { + status = "okay"; + }; + + spi@3270000 { + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "NVIDIA IGX HDA"; + status = "okay"; + }; + + fuse@3810000 { + status = "okay"; + }; + + i2c@c240000 { + status = "okay"; + }; + + i2c@c250000 { + status = "okay"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi new file mode 100644 index 000000000000..c95063b19321 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + compatible = "nvidia,p3740-0002"; + + bus@0 { + i2c@31c0000 { + /* carrier board ID EEPROM */ + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + + label = "system"; + vcc-supply = <&vdd_1v8_ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + usb-role-switch; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", + "usb3-0", "usb3-1", "usb3-2"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi new file mode 100644 index 000000000000..232fa95ef4ae --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234-p3767.dtsi" + +/ { + compatible = "nvidia,p3767-0005", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin Nano"; + + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin Nano HDA"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi index bd60478fa75e..a8aa6e7d8fbc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -99,74 +99,24 @@ }; thermal-zones { - /* - * This monitoring is far from optimal, but it's good enough - * at this stage. - */ - cpu-thermal { + tj-thermal { polling-delay = <1000>; polling-delay-passive = <1000>; status = "okay"; trips { - critical { - temperature = <104500>; - hysteresis = <0>; - type = "critical"; - }; - - hot { - temperature = <99000>; - hysteresis = <1000>; - type = "hot"; - }; - - board_trip_passive: passive { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - board_trip_active2: active-2 { - temperature = <80000>; + tj_trip_active0: active-0 { + temperature = <74000>; hysteresis = <4000>; type = "active"; }; - board_trip_active1: active-1 { - temperature = <65000>; - hysteresis = <4000>; - type = "active"; - }; - - board_trip_active0: active-0 { - temperature = <50000>; + tj_trip_active1: active-1 { + temperature = <95000>; hysteresis = <4000>; type = "active"; }; }; - - cooling-maps { - passive { - cooling-device = <&fan 3 3>; - trip = <&board_trip_passive>; - }; - - active2 { - cooling-device = <&fan 2 3>; - trip = <&board_trip_active2>; - }; - - active1 { - cooling-device = <&fan 1 2>; - trip = <&board_trip_active1>; - }; - - active0 { - cooling-device = <&fan 0 1>; - trip = <&board_trip_active0>; - }; - }; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts index 7dfbc38eb3c4..65e4b51b79c1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -112,11 +112,8 @@ }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - cooling-levels = <0 95 178 255>; - #cooling-cells = <2>; + pwm-fan { + cooling-levels = <0 187 255>; }; vdd_3v3_pcie: regulator-vdd-3v3-pcie { @@ -131,4 +128,20 @@ serial { status = "okay"; }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts new file mode 100644 index 000000000000..9b86aa6f7dbe --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra234-p3767-0005.dtsi" +#include "tegra234-p3768-0000.dtsi" + +/ { + compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin Nano Developer Kit"; + + pwm-fan { + cooling-levels = <0 187 255>; + }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi index aee21428e1a5..c7291ba27cfa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi @@ -119,7 +119,7 @@ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; - phy-names = "usb2-0", "usb3-1"; + phy-names = "usb2-0", "usb3-0"; }; usb@3610000 { @@ -209,7 +209,6 @@ fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm3 0 45334>; - cooling-levels = <0 95 178 255>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 18b4c2b2c42c..f4974e81dd4b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> +#include <dt-bindings/thermal/tegra234-bpmp-thermal.h> / { compatible = "nvidia,tegra234"; @@ -108,6 +109,12 @@ interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux 0 0 164>; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra234-pinmux"; + reg = <0x0 0x2430000 0x0 0x19100>; }; gpcdma: dma-controller@2600000 { @@ -1749,6 +1756,12 @@ interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux_aon 0 0 32>; + }; + + pinmux_aon: pinmux@c300000 { + compatible = "nvidia,tegra234-pinmux-aon"; + reg = <0x0 0xc300000 0x0 0x4000>; }; pwm4: pwm@c340000 { @@ -3015,6 +3028,11 @@ #address-cells = <1>; #size-cells = <0>; }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; }; cpus { @@ -3028,6 +3046,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3044,6 +3065,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3060,6 +3084,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3076,6 +3103,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl0_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3092,6 +3122,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3108,6 +3141,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3124,6 +3160,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3140,6 +3179,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl1_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3156,6 +3198,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3172,6 +3217,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3188,6 +3236,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3204,6 +3255,9 @@ enable-method = "psci"; + operating-points-v2 = <&cl2_opp_tbl>; + interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>; + i-cache-size = <65536>; i-cache-line-size = <64>; i-cache-sets = <256>; @@ -3469,6 +3523,53 @@ <&bpmp TEGRA234_CLK_PLLA_OUT0>; }; + thermal-zones { + cpu-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CPU>; + status = "disabled"; + }; + + gpu-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_GPU>; + status = "disabled"; + }; + + cv0-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV0>; + status = "disabled"; + }; + + cv1-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV1>; + status = "disabled"; + }; + + cv2-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV2>; + status = "disabled"; + }; + + soc0-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC0>; + status = "disabled"; + }; + + soc1-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC1>; + status = "disabled"; + }; + + soc2-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC2>; + status = "disabled"; + }; + + tj-thermal { + thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_TJ_MAX>; + status = "disabled"; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -3478,4 +3579,244 @@ interrupt-parent = <&gic>; always-on; }; + + cl0_opp_tbl: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + + cl0_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl0_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl0_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl0_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl0_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl0_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl0_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl0_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; + + cl1_opp_tbl: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + + cl1_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl1_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl1_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl1_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl1_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl1_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl1_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl1_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; + + cl2_opp_tbl: opp-table-cluster2 { + compatible = "operating-points-v2"; + opp-shared; + + cl2_ch1_opp1: opp-115200000 { + opp-hz = /bits/ 64 <115200000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp2: opp-268800000 { + opp-hz = /bits/ 64 <268800000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp3: opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp5: opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp6: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp7: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp8: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <816000>; + }; + + cl2_ch1_opp9: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <1632000>; + }; + + cl2_ch1_opp10: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <1632000>; + }; + + cl2_ch1_opp11: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <2660000>; + }; + + cl2_ch1_opp12: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <2660000>; + }; + + cl2_ch1_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <3200000>; + }; + + cl2_ch1_opp14: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6400000>; + }; + + cl2_ch1_opp15: opp-2201600000 { + opp-hz = /bits/ 64 <2201600000>; + opp-peak-kBps = <6400000>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d42c59572ace..4f9e81253e18 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,15 +1,20 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -32,6 +37,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -82,6 +88,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -140,6 +147,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb @@ -174,6 +183,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 59860a2223b8..56dfca61253e 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -18,8 +18,10 @@ compatible = "qcom,apq8016-sbc", "qcom,apq8016"; aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + serial1 = &blsp_uart1; usid0 = &pm8916_0; i2c0 = &blsp_i2c2; i2c1 = &blsp_i2c6; @@ -75,7 +77,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -101,13 +103,13 @@ button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; }; }; leds { pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, + pinctrl-0 = <&tlmm_leds>, <&pm8916_gpios_leds>, <&pm8916_mpps_leds>; @@ -117,7 +119,7 @@ label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -126,7 +128,7 @@ label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; @@ -186,14 +188,14 @@ compatible = "adi,adv7533"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; clocks = <&rpmcc RPM_SMD_BB_CLK2>; clock-names = "cec"; - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; avdd-supply = <&pm8916_l6>; v1p2-supply = <&pm8916_l6>; @@ -211,7 +213,7 @@ port@0 { reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -243,12 +245,12 @@ label = "LS-SPI0"; }; -&blsp1_uart1 { +&blsp_uart1 { status = "okay"; label = "LS-UART0"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; label = "LS-UART1"; }; @@ -276,8 +278,8 @@ compatible = "ovti,ov5640"; reg = <0x3b>; - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_default>; @@ -301,12 +303,11 @@ }; }; -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; +&lpass { + status = "okay"; }; -&lpass { +&lpass_codec { status = "okay"; }; @@ -314,17 +315,59 @@ status = "okay"; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + &mpss { status = "okay"; firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; }; +&pm8916_codec { + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + /* + * The 96Boards specification expects a 1.8V power rail on the low-speed + * expansion connector that is able to provide at least 0.18W / 100 mA. + * L15/L16 are connected in parallel to provide 55 mA each. A minimum load + * must be specified to ensure the regulators are not put in LPM where they + * would only provide 5 mA. + */ + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + &sdhc_1 { status = "okay"; @@ -340,7 +383,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &sound { @@ -370,7 +413,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -380,7 +423,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -398,13 +441,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - &wcnss { status = "okay"; firmware-name = "qcom/apq8016/wcnss.mbn"; @@ -441,130 +477,19 @@ &stm { status = "okay"; }; &tpiu { status = "okay"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - /* * 2mA drive strength is not enough when connecting multiple * I2C devices with different pull up resistors. */ -&i2c2_default { +&blsp_i2c2_default { drive-strength = <16>; }; -&i2c4_default { +&blsp_i2c4_default { drive-strength = <16>; }; -&i2c6_default { +&blsp_i2c6_default { drive-strength = <16>; }; @@ -592,7 +517,7 @@ * ones actually used for GPIO. */ -&msmgpio { +&tlmm { gpio-line-names = "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ @@ -717,7 +642,7 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds-state { + tlmm_leds: tlmm-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 000000000000..e783b0af355e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = <QCOM_ID_APQ8039 0x30000>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp_uart1 { + status = "okay"; +}; + +&blsp_uart1_default { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + /* l1 is fixed to 1225000, but not connected in schematic */ + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_default>; + pinctrl-1 = <&cdc_pdm_lines_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 71e0a500599c..ed2e2f6c6775 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -26,7 +26,7 @@ v1p05: v1p05-regulator { compatible = "regulator-fixed"; - reglator-name = "v1p05"; + regulator-name = "v1p05"; regulator-always-on; regulator-boot-on; @@ -38,7 +38,7 @@ v12_poe: v12-poe-regulator { compatible = "regulator-fixed"; - reglator-name = "v12_poe"; + regulator-name = "v12_poe"; regulator-always-on; regulator-boot-on; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts new file mode 100644 index 000000000000..bcf3b31c20e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP442 board device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3"; + compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 12e0e179e139..47984037f0a5 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -134,6 +134,13 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + qfprom: efuse@a4000 { + compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x721>; + #address-cells = <1>; + #size-cells = <1>; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 9ff4e9d45065..1c41169efc65 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -90,6 +90,7 @@ firmware { scm { compatible = "qcom,scm-ipq6018", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; @@ -154,18 +155,28 @@ no-map; }; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz: memory@4a600000 { - reg = <0x0 0x4a600000 0x0 0x00400000>; + reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; smem_region: memory@4aa00000 { - reg = <0x0 0x4aa00000 0x0 0x00100000>; + reg = <0x0 0x4aa00000 0x0 0x100000>; no-map; }; q6_region: memory@4ab00000 { - reg = <0x0 0x4ab00000 0x0 0x05500000>; + reg = <0x0 0x4ab00000 0x0 0x5500000>; no-map; }; }; @@ -198,7 +209,7 @@ hwlocks = <&tcsr_mutex 0>; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x0 0xffffffff>; @@ -301,7 +312,14 @@ status = "disabled"; }; - prng: qrng@e1000 { + qfprom: efuse@a4000 { + compatible = "qcom,ipq6018-qfprom", "qcom,qfprom"; + reg = <0x0 0x000a4000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + prng: qrng@e3000 { compatible = "qcom,prng-ee"; reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -440,7 +458,6 @@ #size-cells = <0>; reg = <0x0 0x078b5000 0x0 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -455,7 +472,6 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -571,7 +587,7 @@ #address-cells = <2>; #size-cells = <2>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 84e715aa4310..40565ce635dd 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -29,8 +29,8 @@ }; cpus { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; @@ -85,29 +85,40 @@ #size-cells = <2>; ranges; + bootloader@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + smem@4ab00000 { compatible = "qcom,smem"; - reg = <0x0 0x4ab00000 0x0 0x00100000>; + reg = <0x0 0x4ab00000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; }; memory@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x400000>; no-map; - reg = <0x0 0x4ac00000 0x0 0x00400000>; }; }; firmware { scm { compatible = "qcom,scm-ipq8074", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; - soc: soc { - #address-cells = <0x1>; - #size-cells = <0x1>; + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; @@ -321,9 +332,9 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 70>; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; @@ -381,6 +392,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq8074", "syscon"; + reg = <0x01937000 0x21000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -475,7 +491,6 @@ #size-cells = <0>; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -533,6 +548,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -666,7 +695,7 @@ #address-cells = <1>; #size-cells = <1>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ranges = <0 0xb00a000 0xffd>; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts new file mode 100644 index 000000000000..2b093e02637b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP418 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; + compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2c8430197ec0..2b3ed8d351f7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * IPQ9574 AL02-C7 board device tree source + * IPQ9574 RDP433 board device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. @@ -29,6 +29,25 @@ status = "okay"; }; +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts new file mode 100644 index 000000000000..c8fa54e1a62c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP449 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; + compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts new file mode 100644 index 000000000000..f01de6628c3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP453 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 3bb7435f5e7f..988107a9edc4 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -6,8 +6,9 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> / { @@ -16,12 +17,6 @@ #size-cells = <2>; clocks { - bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { - compatible = "fixed-clock"; - clock-frequency = <353000000>; - #clock-cells = <0>; - }; - sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -43,6 +38,10 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU1: cpu@1 { @@ -51,6 +50,10 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU2: cpu@2 { @@ -59,6 +62,10 @@ reg = <0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU3: cpu@3 { @@ -67,6 +74,10 @@ reg = <0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; L2_0: l2-cache { @@ -75,12 +86,60 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq9574", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + memory@40000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0x0 0x40000000 0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-936000000 { + opp-hz = /bits/ 64 <936000000>; + opp-microvolt = <725000>; + clock-latency-ns = <200000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <787500>; + clock-latency-ns = <200000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <862500>; + clock-latency-ns = <200000>; + }; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <200000>; + }; + }; + pmu { compatible = "arm,cortex-a73-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -100,6 +159,25 @@ reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; + + smem@4aa00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4aa00000 0x0 0x00100000>; + hwlocks = <&tcsr_mutex 0>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-ipq9574"; + qcom,glink-channels = "rpm_requests"; + }; }; soc: soc@0 { @@ -108,6 +186,25 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x6000>; + }; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: efuse@a4000 { + compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x5a1>; + #address-cells = <1>; + #size-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>; @@ -131,7 +228,7 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, - <&bias_pll_ubi_nc_clk>, + <0>, <0>, <0>, <0>, @@ -142,6 +239,17 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq9574", "syscon"; + reg = <0x01937000 0x21000>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x07805000 0x1000>; @@ -159,6 +267,36 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; @@ -169,17 +307,174 @@ status = "disabled"; }; + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b3000 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b4000 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ - <0x0b002000 0x1000>, /* GICC */ + <0x0b002000 0x2000>, /* GICC */ <0x0b001000 0x1000>, /* GICH */ - <0x0b004000 0x1000>; /* GICV */ + <0x0b004000 0x2000>; /* GICV */ #address-cells = <1>; #size-cells = <1>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; ranges = <0 0x0b00c000 0x3000>; v2m0: v2m@0 { @@ -201,6 +496,32 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq9574-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a73pll>, <&xo_board_clk>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a73pll: clock@b116000 { + compatible = "qcom,ipq9574-a73pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 13cd9ad167df..5025c08e4817 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -22,7 +22,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -39,14 +41,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -58,7 +60,7 @@ accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -89,10 +91,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l16>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,6 +116,18 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -131,7 +145,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -153,110 +167,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index fecb69944cfa..7b629243ef0d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,7 +32,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -42,7 +44,7 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; linux,default-trigger = "torch"; function = LED_FUNCTION_TORCH; }; @@ -50,13 +52,13 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -66,9 +68,9 @@ touchscreen@26 { compatible = "mstar,msg2638"; reg = <0x26>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_reset_default>; vdd-supply = <&pm8916_l17>; @@ -86,7 +88,7 @@ reg = <0x0c>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; mount-matrix = "0", "1", "0", @@ -99,7 +101,7 @@ reg = <0x0f>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; @@ -111,7 +113,7 @@ proximity@48 { compatible = "sensortek,stk3310"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&proximity_int_default>; @@ -122,7 +124,7 @@ reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <97 IRQ_TYPE_EDGE_RISING>, <98 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -136,7 +138,7 @@ led-controller@68 { compatible = "si-en,sn3190"; reg = <0x68>; - shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_enable_default &led_shutdown_default>; #address-cells = <1>; @@ -156,6 +158,13 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -175,7 +184,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -195,110 +204,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 91284a1d0966..b8c217b04a3b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,14 +32,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; button-volume-down { label = "Volume Down"; - gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; }; @@ -49,7 +51,7 @@ regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <200>; @@ -60,7 +62,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -76,7 +78,7 @@ vdd-supply = <&pm8916_l8>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +88,7 @@ compatible = "invensense,mpu6515"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -108,10 +110,10 @@ compatible = "edt,edt-ft5306"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l11>; iovcc-supply = <&pm8916_l6>; @@ -124,10 +126,17 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; @@ -143,7 +152,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -163,110 +172,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 525ec76efeeb..56c42b0c9733 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -14,7 +14,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -24,8 +26,8 @@ flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_flash_default>; pinctrl-names = "default"; @@ -45,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -59,21 +61,21 @@ led-red { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_RED>; - gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; led-green { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; @@ -87,10 +89,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,6 +116,13 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -131,7 +140,7 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -153,110 +162,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 5b1bac8f5122..175ca011998c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -26,7 +26,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -43,7 +45,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -55,21 +57,21 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-1 { - gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-2 { - gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; default-state = "off"; function = LED_FUNCTION_INDICATOR; @@ -78,7 +80,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -94,7 +96,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -104,7 +106,7 @@ compatible = "kionix,kx023-1025"; reg = <0x1e>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -122,7 +124,7 @@ compatible = "avago,apds9930"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -146,7 +148,7 @@ regulator-name = "outp"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; @@ -154,7 +156,7 @@ regulator-name = "outn"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; }; @@ -169,7 +171,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -199,18 +201,18 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x28>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -218,11 +220,40 @@ status = "okay"; }; +&lpass_codec { + status = "okay"; +}; + +&pm8916_codec { + status = "okay"; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -243,7 +274,7 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; /* - * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. * However, gpio38 does not change its state when inserting/removing the * SD card, it's just low all the time. The Huawei kernel seems to use * polling for SD card detection instead. @@ -255,7 +286,7 @@ * Maybe Huawei decided to replace the second SIM card slot with the * SD card slot and forgot to re-route to gpio38. */ - cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; }; &sound { @@ -277,7 +308,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -287,7 +318,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -301,13 +332,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - qcom,micbias-lvl = <2800>; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - qcom,hphl-jack-type-normally-open; -}; - &wcnss { status = "okay"; }; @@ -316,110 +340,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index f1dd625e1822..9560ba632c6f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -14,7 +14,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -41,7 +43,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -53,7 +55,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -62,8 +64,8 @@ flash-led-controller { compatible = "sgmicro,sgm3140"; - flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -122,7 +124,7 @@ * to the BMC156. However, there are two pads next to the chip * that can be shorted to make it work if needed. * - * interrupt-parent = <&msmgpio>; + * interrupt-parent = <&tlmm>; * interrupts = <116 IRQ_TYPE_EDGE_RISING>; */ @@ -141,7 +143,7 @@ compatible = "bosch,bmc156_magn"; reg = <0x12>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -156,7 +158,7 @@ reg = <0x23>; proximity-near-level = <75>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -170,7 +172,7 @@ compatible = "bosch,bmg160"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <23 IRQ_TYPE_EDGE_RISING>, <22 IRQ_TYPE_EDGE_RISING>; @@ -191,7 +193,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <®_ctp>; @@ -214,7 +216,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -223,6 +225,13 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_usbin { status = "okay"; }; @@ -267,110 +276,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio116"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index b79e80913af9..f23cfb2bf793 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -13,13 +13,30 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; + flash-led-controller { + compatible = "ocs,ocp8110"; + enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -30,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -39,7 +56,7 @@ compatible = "gpio-leds"; led-0 { - gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -51,7 +68,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +84,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +103,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -95,6 +112,13 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -114,7 +138,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -134,110 +158,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; @@ -246,6 +167,13 @@ bias-disable; }; + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio49", "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index 7c0ceb3cff45..438eb1faee1d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -12,7 +12,7 @@ compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; aliases { - serial0 = &blsp1_uart2; + serial0 = &blsp_uart2; usid0 = &pm8916_0; }; @@ -21,6 +21,6 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 33dfcf318a81..1b60d42a13c7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -3,9 +3,9 @@ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. */ -&msmgpio { +&tlmm { - blsp1_uart1_default: blsp1-uart1-default-state { + blsp_uart1_default: blsp-uart1-default-state { /* TX, RX, CTS_N, RTS_N */ pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "blsp_uart1"; @@ -14,7 +14,7 @@ bias-disable; }; - blsp1_uart1_sleep: blsp1-uart1-sleep-state { + blsp_uart1_sleep: blsp-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -22,7 +22,7 @@ bias-pull-down; }; - blsp1_uart2_default: blsp1-uart2-default-state { + blsp_uart2_default: blsp-uart2-default-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; @@ -30,7 +30,7 @@ bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep-state { + blsp_uart2_sleep: blsp-uart2-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; @@ -38,7 +38,7 @@ bias-pull-down; }; - spi1_default: spi1-default-state { + blsp_spi1_default: blsp-spi1-default-state { spi-pins { pins = "gpio0", "gpio1", "gpio3"; function = "blsp_spi1"; @@ -56,7 +56,7 @@ }; }; - spi1_sleep: spi1-sleep-state { + blsp_spi1_sleep: blsp-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -64,7 +64,7 @@ bias-pull-down; }; - spi2_default: spi2-default-state { + blsp_spi2_default: blsp-spi2-default-state { spi-pins { pins = "gpio4", "gpio5", "gpio7"; function = "blsp_spi2"; @@ -82,7 +82,7 @@ }; }; - spi2_sleep: spi2-sleep-state { + blsp_spi2_sleep: blsp-spi2-sleep-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "gpio"; @@ -90,7 +90,7 @@ bias-pull-down; }; - spi3_default: spi3-default-state { + blsp_spi3_default: blsp-spi3-default-state { spi-pins { pins = "gpio8", "gpio9", "gpio11"; function = "blsp_spi3"; @@ -108,7 +108,7 @@ }; }; - spi3_sleep: spi3-sleep-state { + blsp_spi3_sleep: blsp-spi3-sleep-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "gpio"; @@ -116,7 +116,7 @@ bias-pull-down; }; - spi4_default: spi4-default-state { + blsp_spi4_default: blsp-spi4-default-state { spi-pins { pins = "gpio12", "gpio13", "gpio15"; function = "blsp_spi4"; @@ -134,7 +134,7 @@ }; }; - spi4_sleep: spi4-sleep-state { + blsp_spi4_sleep: blsp-spi4-sleep-state { pins = "gpio12", "gpio13", "gpio14", "gpio15"; function = "gpio"; @@ -142,7 +142,7 @@ bias-pull-down; }; - spi5_default: spi5-default-state { + blsp_spi5_default: blsp-spi5-default-state { spi-pins { pins = "gpio16", "gpio17", "gpio19"; function = "blsp_spi5"; @@ -160,7 +160,7 @@ }; }; - spi5_sleep: spi5-sleep-state { + blsp_spi5_sleep: blsp-spi5-sleep-state { pins = "gpio16", "gpio17", "gpio18", "gpio19"; function = "gpio"; @@ -168,7 +168,7 @@ bias-pull-down; }; - spi6_default: spi6-default-state { + blsp_spi6_default: blsp-spi6-default-state { spi-pins { pins = "gpio20", "gpio21", "gpio23"; function = "blsp_spi6"; @@ -186,7 +186,7 @@ }; }; - spi6_sleep: spi6-sleep-state { + blsp_spi6_sleep: blsp-spi6-sleep-state { pins = "gpio20", "gpio21", "gpio22", "gpio23"; function = "gpio"; @@ -194,7 +194,7 @@ bias-pull-down; }; - i2c1_default: i2c1-default-state { + blsp_i2c1_default: blsp-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; @@ -202,7 +202,7 @@ bias-disable; }; - i2c1_sleep: i2c1-sleep-state { + blsp_i2c1_sleep: blsp-i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; @@ -210,7 +210,7 @@ bias-disable; }; - i2c2_default: i2c2-default-state { + blsp_i2c2_default: blsp-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; @@ -218,7 +218,7 @@ bias-disable; }; - i2c2_sleep: i2c2-sleep-state { + blsp_i2c2_sleep: blsp-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; @@ -226,7 +226,7 @@ bias-disable; }; - i2c3_default: i2c3-default-state { + blsp_i2c3_default: blsp-i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; @@ -234,7 +234,7 @@ bias-disable; }; - i2c3_sleep: i2c3-sleep-state { + blsp_i2c3_sleep: blsp-i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; @@ -242,7 +242,7 @@ bias-disable; }; - i2c4_default: i2c4-default-state { + blsp_i2c4_default: blsp-i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; @@ -250,7 +250,7 @@ bias-disable; }; - i2c4_sleep: i2c4-sleep-state { + blsp_i2c4_sleep: blsp-i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; @@ -258,7 +258,7 @@ bias-disable; }; - i2c5_default: i2c5-default-state { + blsp_i2c5_default: blsp-i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; @@ -266,7 +266,7 @@ bias-disable; }; - i2c5_sleep: i2c5-sleep-state { + blsp_i2c5_sleep: blsp-i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; @@ -274,7 +274,7 @@ bias-disable; }; - i2c6_default: i2c6-default-state { + blsp_i2c6_default: blsp-i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; @@ -282,7 +282,7 @@ bias-disable; }; - i2c6_sleep: i2c6-sleep-state { + blsp_i2c6_sleep: blsp-i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 6eb5e0a39510..b1a7eafbee31 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -1,4 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-only +/* + * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ #include "msm8916.dtsi" #include "pm8916.dtsi" @@ -7,12 +15,12 @@ vdda-supply = <&pm8916_l2>; }; -&dsi0 { +&mdss_dsi0 { vdda-supply = <&pm8916_l2>; vddio-supply = <&pm8916_l6>; }; -&dsi_phy0 { +&mdss_dsi0_phy { vddio-supply = <&pm8916_l6>; }; @@ -20,6 +28,12 @@ pll-supply = <&pm8916_l7>; }; +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -47,30 +61,97 @@ }; &rpm_requests { - smd_rpm_regulators: regulators { + pm8916_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ - pm8916_s3: s3 {}; - pm8916_s4: s4 {}; - pm8916_l1: l1 {}; - pm8916_l2: l2 {}; + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ - pm8916_l4: l4 {}; - pm8916_l5: l5 {}; - pm8916_l6: l6 {}; - pm8916_l7: l7 {}; - pm8916_l8: l8 {}; - pm8916_l9: l9 {}; - pm8916_l10: l10 {}; - pm8916_l11: l11 {}; - pm8916_l12: l12 {}; - pm8916_l13: l13 {}; - pm8916_l14: l14 {}; - pm8916_l15: l15 {}; - pm8916_l16: l16 {}; - pm8916_l17: l17 {}; - pm8916_l18: l18 {}; + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 16d67749960e..895036fb6eb8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -8,7 +8,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -44,13 +46,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -65,7 +67,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -83,7 +85,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -96,7 +98,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -105,8 +107,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -118,7 +120,7 @@ compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -128,8 +130,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -142,7 +144,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; /* vcc/vdd-supply are board-specific */ @@ -157,8 +159,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -170,11 +172,11 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; - wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -200,7 +202,7 @@ accelerometer: accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -225,7 +227,7 @@ battery@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; @@ -233,25 +235,32 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_default>; pinctrl-1 = <&mdss_sleep>; }; -&mdss { - status = "okay"; -}; - &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; @@ -267,7 +276,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -279,110 +288,7 @@ extcon = <&muic>; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index a1ca4d883420..e5a569698c4f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -28,7 +28,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -41,7 +41,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -67,7 +67,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -85,7 +85,7 @@ status = "okay"; }; -&dsi0 { +&mdss_dsi0 { panel@0 { reg = <0>; @@ -93,17 +93,17 @@ vdd3-supply = <®_panel_vdd3>; vci-supply = <&pm8916_l17>; - reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { data-lanes = <0 1>; remote-endpoint = <&panel_in>; }; @@ -120,7 +120,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 4e10b8a5e9f9..388482a1e3d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -36,7 +36,7 @@ compatible = "melfas,mms345l"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <720>; @@ -71,7 +71,7 @@ compatible = "qcom,wcn3660b"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index f6c4a011fdfd..0cdd6af7817f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -18,7 +18,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -32,7 +32,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -66,7 +66,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 4cbd68b89448..3f145dde4059 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -33,7 +33,7 @@ function = LED_FUNCTION_KBD_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; - gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&gpio_leds_default>; @@ -42,14 +42,14 @@ }; ®_motor_vdd { - gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; ®_touch_key { status = "disabled"; }; -&msmgpio { +&tlmm { gpio_leds_default: gpio-led-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 74ffd04db8d8..94cfb3200496 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -9,7 +9,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -34,13 +36,13 @@ volume-up-button { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; home-button { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -55,7 +57,7 @@ hall-sensor-switch { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -74,7 +76,7 @@ maxim,over-heat-temp = <600>; maxim,over-volt = <4400>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&fuelgauge_int_default>; @@ -97,7 +99,7 @@ vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; @@ -111,7 +113,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -120,6 +122,13 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + /* FIXME: Replace with MAX77849 MUIC when driver is available */ &pm8916_usbin { status = "okay"; @@ -138,7 +147,7 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -162,110 +171,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 607a5dc8a534..48111c6a2c78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -25,7 +25,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&motor_en_default>; @@ -38,7 +38,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&tsp_en_default>; @@ -51,7 +51,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -71,20 +71,20 @@ touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®_tsp_1p8v>; vdda-supply = <®_tsp_3p3v>; - reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; pinctrl-0 = <&tsp_int_rst_default>; pinctrl-names = "default"; }; }; -&msmgpio { +&tlmm { motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 5d6f8383306b..98ceaad7fcea 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <®_tsp_en_default>; @@ -24,7 +24,7 @@ vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&vibrator_en_default>; pinctrl-names = "default"; @@ -37,7 +37,7 @@ touchscreen@20 { compatible = "zinitix,bt532"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <768>; @@ -51,7 +51,7 @@ }; }; -&msmgpio { +&tlmm { reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index adeee0830e76..f2a5800f1605 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -7,7 +7,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -32,7 +34,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -49,21 +51,21 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home Key"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; i2c_muic: i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -75,7 +77,7 @@ compatible = "siliconmitus,sm5703-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -84,7 +86,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -108,7 +110,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -128,110 +130,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 1a41a4db874d..3637e7d80d0a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -28,7 +28,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -53,13 +55,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -74,7 +76,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -87,7 +89,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -100,7 +102,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -113,7 +115,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -122,8 +124,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -135,7 +137,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -145,8 +147,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -158,7 +160,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <®_touch_key>; @@ -174,8 +176,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -187,11 +189,11 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x2b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; @@ -206,7 +208,7 @@ compatible = "st,lsm6ds3"; reg = <0x6b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -230,7 +232,7 @@ compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -245,7 +247,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -259,7 +261,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -320,110 +322,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index 82e260375174..6fe1850ba20e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 978f0abcdf8f..16d4a91022be 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; &led_r { - gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; }; &mpss { @@ -40,7 +40,7 @@ }; /* This selects the external SIM card slot by default */ -&msmgpio { +&tlmm { sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 50bae6f214f1..dafa5bd82328 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -9,7 +9,8 @@ chassis-type = "embedded"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + serial0 = &blsp_uart2; }; chosen { @@ -82,11 +83,11 @@ status = "okay"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */ &gcc { clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; @@ -109,7 +110,7 @@ &usb { extcon = <&pm8916_usbin>; - dr_mode = "peripheral"; + usb-role-switch; status = "okay"; }; @@ -126,110 +127,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { /* pins are board-specific */ button_default: button-default-state { function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index ac56c7595f78..733917531218 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -16,7 +16,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -25,8 +27,8 @@ flash-led-controller { compatible = "ocs,ocp8110"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -47,14 +49,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +69,7 @@ compatible = "invensense,mpu6880"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -90,10 +92,10 @@ compatible = "edt,edt-ft5506"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -140,7 +142,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -149,6 +151,22 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + /* + * L16 is only used for AW2013 which is fine with 2.5-3.3V. + * Use the recommended typical voltage of 2.8V as minimum. + */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -188,110 +206,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts index 74ce6563be18..5e6ba8c58bb5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 7e0fa37a3adf..cc5d3cf64721 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -18,11 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - chosen { }; memory@80000000 { @@ -992,12 +987,12 @@ }; }; - msmgpio: pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 122>; + gpio-ranges = <&tlmm 0 0 122>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1011,8 +1006,8 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board>, <&sleep_clk>, - <&dsi_phy0 1>, - <&dsi_phy0 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>; @@ -1061,7 +1056,7 @@ #size-cells = <1>; ranges; - mdp: display-controller@1a01000 { + mdss_mdp: display-controller@1a01000 { compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; @@ -1086,14 +1081,14 @@ port@0 { reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; }; }; }; }; - dsi0: dsi@1a98000 { + mdss_dsi0: dsi@1a98000 { compatible = "qcom,msm8916-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; @@ -1104,8 +1099,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -1119,7 +1114,7 @@ "byte", "pixel", "core"; - phys = <&dsi_phy0>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -1130,20 +1125,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi_phy0: phy@1a98300 { + mdss_dsi0_phy: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, @@ -1161,7 +1156,7 @@ }; }; - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; reg = <0x01b0ac00 0x200>, <0x01b00030 0x4>, @@ -1519,20 +1514,20 @@ * Primary/Secondary MI2S both use the PRI_I2S_CLK. */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; clock-names = "ahbix-clk", - "pcnoc-mport-clk", - "pcnoc-sway-clk", "mi2s-bit-clk0", "mi2s-bit-clk1", "mi2s-bit-clk2", - "mi2s-bit-clk3"; + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; #sound-dai-cells = <1>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; @@ -1551,9 +1546,10 @@ <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "ahbix-clk", "mclk"; #sound-dai-cells = <1>; + status = "disabled"; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -1571,7 +1567,7 @@ status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -1597,7 +1593,7 @@ qcom,ee = <0>; }; - blsp1_uart1: serial@78af000 { + blsp_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -1606,12 +1602,12 @@ dmas = <&blsp_dma 0>, <&blsp_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; status = "disabled"; }; - blsp1_uart2: serial@78b0000 { + blsp_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b0000 0x200>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; @@ -1620,8 +1616,8 @@ dmas = <&blsp_dma 2>, <&blsp_dma 3>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; status = "disabled"; }; @@ -1635,8 +1631,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1652,8 +1648,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi1_default>; - pinctrl-1 = <&spi1_sleep>; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1669,8 +1665,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1686,8 +1682,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi2_default>; - pinctrl-1 = <&spi2_sleep>; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1703,8 +1699,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c3_default>; - pinctrl-1 = <&i2c3_sleep>; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1720,8 +1716,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi3_default>; - pinctrl-1 = <&spi3_sleep>; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1737,8 +1733,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c4_default>; - pinctrl-1 = <&i2c4_sleep>; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1754,8 +1750,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi4_default>; - pinctrl-1 = <&spi4_sleep>; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1771,8 +1767,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1788,8 +1784,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1805,8 +1801,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1822,8 +1818,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi6_default>; - pinctrl-1 = <&spi6_sleep>; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1870,7 +1866,7 @@ }; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi new file mode 100644 index 000000000000..33e02f42f5e4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8939.dtsi" +#include "pm8916.dtsi" + +&mdss_dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi0_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&rpm_requests { + smd_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 000000000000..85a8d8fe212f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi new file mode 100644 index 000000000000..0d9f8b951b66 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -0,0 +1,2452 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-msm8939.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8939.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + /* + * Stock LK wants address-cells/size-cells = 2 + * A number of our drivers want address/size cells = 1 + * hence the disparity between top-level and /soc below. + */ + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x100>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x101>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU2: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x102>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU3: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x103>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU4: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x0>; + qcom,acc = <&acc4>; + qcom,saw = <&saw4>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x1>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc5>; + qcom,saw = <&saw5>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU6: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x2>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc6>; + qcom,saw = <&saw6>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU7: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x3>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc7>; + qcom,saw = <&saw7>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible ="qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + }; + + /* + * MSM8939 has a big.LITTLE heterogeneous computing architecture, + * consisting of two clusters of four ARM Cortex-A53s each. The + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs + * at 1.5-1.7GHz. + * + * The enable method used here is spin-table which presupposes use + * of a 2nd stage boot shim such as lk2nd to have installed a + * spin-table, the downstream non-psci/non-spin-table method that + * default msm8916/msm8936/msm8939 will not be supported upstream. + */ + cpu-map { + /* LITTLE (efficiency) cluster */ + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + /* big (performance) cluster */ + /* Boot CPU is cluster 1 core 0 */ + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + wcnss_mem: wcnss@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c300000 { + reg = <0x0 0x8c300000 0x0 0x800000>; + no-map; + }; + + mba_mem: mba@8cb00000 { + reg = <0x0 0x8cb00000 0x0 0x100000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs1_mbox 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8936"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8939-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs1_mbox 8 13>; + qcom,ipc-3 = <&apcs1_mbox 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@a0 { + reg = <0xa0 0x1>; + bits = <0 8>; + }; + + tsens_s6_p1: s6-p1@a1 { + reg = <0xa1 0x1>; + bits = <0 6>; + }; + + tsens_s6_p2: s6-p2@a1 { + reg = <0xa1 0x2>; + bits = <6 6>; + }; + + tsens_s7_p1: s7-p1@a2 { + reg = <0xa2 0x2>; + bits = <4 6>; + }; + + tsens_s7_p2: s7-p2@a3 { + reg = <0xa3 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@a4 { + reg = <0xa4 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@a4 { + reg = <0xa4 0x2>; + bits = <6 6>; + }; + + tsens_s9_p1: s9-p1@a5 { + reg = <0xa5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2: s9-p2@a6 { + reg = <0xa6 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@a7 { + reg = <0xa7 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@d0 { + reg = <0xd0 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@d1 { + reg = <0xd1 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@d4 { + reg = <0xd4 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@d5 { + reg = <0xd5 0x2>; + bits = <5 6>; + }; + + tsens_s5_p1: s5-p1@d6 { + reg = <0xd6 0x2>; + bits = <3 6>; + }; + + tsens_s5_p2: s5-p2@d7 { + reg = <0xd7 0x1>; + bits = <1 6>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + #interconnect-cells = <1>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2"; + #qcom,sensors = <9>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8939-pcnoc"; + reg = <0x00500000 0x11000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #interconnect-cells = <1>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14080>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; + #interconnect-cells = <1>; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_pdm_lines_default: pdm-lines-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_lines_sleep: pdm-lines-suspend-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_tlmm_lines_sus: ext-pa-off-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_ws_sus: ext-pa-off-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc1_default_state: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep_state: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + wcnss_pin_a: wcnss-active-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8939"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdss_mdp_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + + mdss_dsi1: dsi@1aa0000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01aa0000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + phys = <&mdss_dsi1_phy>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdss_mdp_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@1aa0300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01aa0300 0xd4>, + <0x01aa0500 0x280>, + <0x01aa0780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-405.0", "qcom,adreno"; + reg = <0x01c00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d", + "rbbmtimer"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>, + <&gcc GCC_OXILI_TIMER_CLK>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + apps_iommu: iommu@1ef0000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + reg = <0x01ef0000 0x3000>; + ranges = <0 0x01e20000 0x40000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <17>; + + /* mdp_0: */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* venus_ns: */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>, + <&gcc GCC_GFX_TBU_CLK>; + clock-names = "iface", "bus", "tbu"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <18>; + + /* gfx3d_user: */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_priv: */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "xo"; + power-domains = <&rpmpd MSM8939_VDDMDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + resets = <&scm 0>; + reset-names = "mss_restart"; + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + mboxes = <&apcs1_mbox 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; + }; + + sound: sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, + <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + status = "disabled"; + }; + + lpass: audio-controller@7708000 { + compatible = "qcom,apq8016-lpass-cpu"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; + clock-names = "ahbix-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + #reset-cells = <1>; + phy_type = "ulpi"; + dr_mode = "otg"; + adp-disable; + hnp-disable; + srp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + #phy-cells = <0>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + power-domains = <&rpmpd MSM8939_VDDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 1>; + qcom,ipc = <&apcs1_mbox 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apcs1_mbox: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + assigned-clocks = <&apcs2>; + assigned-clock-rates = <297600000>; + #mbox-cells = <1>; + }; + + a53pll_c1: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + }; + + apcs0_mbox: mailbox@b111000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + a53pll_c0: clock@b116000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + acc4: clock-controller@b188000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b188000 0x1000>; + }; + + saw4: power-manager@b189000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b189000 0x1000>; + }; + + acc5: clock-controller@b198000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b198000 0x1000>; + }; + + saw5: power-manager@b199000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b199000 0x1000>; + }; + + acc6: clock-controller@b1a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1a8000 0x1000>; + }; + + saw6: power-manager@b1a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1a9000 0x1000>; + }; + + acc7: clock-controller@b1b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1b8000 0x1000>; + }; + + saw7: power-manager@b1b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1b9000 0x1000>; + }; + + a53pll_cci: clock@b1d0000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b1d0000 0x40>; + #clock-cells = <0>; + }; + + apcs2: mailbox@b1d1000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b1d1000 0x1000>; + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4567-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu4567_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4567_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4567_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modem2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 602cb188a635..f42a1e376340 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -1000,7 +1000,7 @@ }; }; - apps_iommu: iommu@1e00000 { + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1274,6 +1274,19 @@ }; }; + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -1292,6 +1305,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -1310,6 +1325,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -1328,6 +1345,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -1345,6 +1365,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -1355,6 +1378,19 @@ status = "disabled"; }; + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; @@ -1362,6 +1398,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1379,6 +1418,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1396,6 +1438,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1413,6 +1458,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; @@ -1423,7 +1471,7 @@ status = "disabled"; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v3-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1505,8 +1553,8 @@ timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; - #address-cells = <0x01>; - #size-cells = <0x01>; + #address-cells = <1>; + #size-cells = <1>; ranges; frame@b121000 { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 1f0bd24a074a..937bb7fcca26 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -820,7 +820,7 @@ #interrupt-cells = <4>; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -836,7 +836,7 @@ status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -955,7 +955,7 @@ #reset-cells = <1>; }; - sdhc_3: mmc@7a24000 { + sdhc_3: mmc@7a24900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07a24900 0x11c>, <0x07a24000 0x800>; reg-names = "hc", "core"; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 2831966be960..184bdde5c78d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -340,8 +340,7 @@ }; }; - soc: soc { - + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -745,7 +744,7 @@ reg = <0xfc4ab000 0x4>; }; - spmi_bus: spmi@fc4c0000 { + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xfc4cf000 0x1000>, <0xfc4cb000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 7f4d493a55ff..b4b770a9277d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -11,6 +11,7 @@ #include "pmi8996.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> @@ -605,6 +606,34 @@ }; }; +&pmi8994_lpg { + qcom,power-source = <1>; + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pmi8994_spmi_regulators { vdd_gfx: pmi8994_s2: s2 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 2b35cb3f5292..a3f49f21ec37 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -604,7 +604,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -887,16 +887,16 @@ #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; clocks = <&xo_board>, - <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, <&gcc GPLL0>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, <&dsi0_phy 1>, <&dsi0_phy 0>, <&dsi1_phy 1>, <&dsi1_phy 0>, <&hdmi_phy>; clock-names = "xo", - "gcc_mmss_noc_cfg_ahb_clk", "gpll0", + "gcc_mmss_noc_cfg_ahb_clk", "dsi0pll", "dsi0pllbyte", "dsi1pll", @@ -1830,7 +1830,7 @@ compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0xffffffff>; pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996"; @@ -2067,7 +2067,7 @@ }; }; - camss: camss@a00000 { + camss: camss@a34000 { compatible = "qcom,msm8996-camss"; reg = <0x00a34000 0x1000>, <0x00a00030 0x4>, diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index b150437a8355..9c7568fb4950 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -800,7 +800,7 @@ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1228,6 +1228,57 @@ drive-strength = <2>; bias-pull-up; }; + + blsp1_spi_b_default: blsp1-spi-b-default-state { + pins = "gpio23", "gpio28"; + function = "blsp1_spi_b"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_spi1"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi2_default: blsp1-spi2-default-state { + pins = "gpio31", "gpio34", "gpio32", "gpio33"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi4_default: blsp1-spi4-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_spi4"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi5_default: blsp1-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "blsp_spi5"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi6_default: blsp1-spi6-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_spi6"; + drive-strength = <6>; + bias-disable; + }; + + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; @@ -1312,6 +1363,48 @@ drive-strength = <2>; bias-pull-up; }; + + blsp2_spi1_default: blsp2-spi1-default-state { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "blsp_spi7"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_spi8"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi3_default: blsp2-spi3-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_spi9"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi4_default: blsp2-spi4-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "blsp_spi10"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi5_default: blsp2-spi5-default-state { + pins = "gpio58", "gpio59", "gpio60", "gpio61"; + function = "blsp_spi11"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi6_default: blsp2-spi6-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "blsp_spi12"; + drive-strength = <6>; + bias-disable; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -2249,6 +2342,114 @@ #size-cells = <0>; }; + blsp1_spi1: spi@c175000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi2: spi@c176000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi3: spi@c177000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi4: spi@c178000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi5: spi@c179000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi6: spi@c17a000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; @@ -2392,6 +2593,114 @@ #size-cells = <0>; }; + blsp2_spi1: spi@c1b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi2: spi@c1b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi3: spi@c1b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi4: spi@c1b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi5: spi@c1b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi6: spi@c1ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1ba000 0x600>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + mmcc: clock-controller@c8c0000 { compatible = "qcom,mmcc-msm8998"; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index d709d955a2f5..daa6f1d30efa 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com> */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 46396ec1a330..33f357a80636 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -55,5 +55,11 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f4fb1a92ab55..1ea8920ff369 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -139,7 +139,7 @@ status = "disabled"; }; - wcd_codec: audio-codec@f000 { + pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; reg-names = "pmic-codec-core"; @@ -174,10 +174,8 @@ "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index a1d36f9ebbd2..2268daf27fa7 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -79,6 +79,16 @@ reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + + pm8953_gpios: gpio@c000 { + compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8953_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 340033ac3186..695d79116cde 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -55,7 +55,7 @@ pm8998_resin: resin { compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi new file mode 100644 index 000000000000..4eb79e0ce40a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmi632-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmi632_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmi632_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + channel@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + channel@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + channel@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + channel@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + }; + + pmi632_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmi632_sdam_7: nvram@b600 { + compatible = "qcom,spmi-sdam"; + reg = <0xb600>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb600 0x100>; + }; + + pmi632_gpios: gpio@c000 { + compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi632_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_lpg: pwm { + compatible = "qcom,pmi632-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index ffe587f281d8..08e00819b39d 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -60,6 +60,12 @@ status = "disabled"; }; + pmi8998_flash: led-controller@d300 { + compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pmi8998_wled: leds@d800 { compatible = "qcom,pmi8998-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index f26fb7d32faf..bc6297e7253e 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -13,6 +13,16 @@ #define PMK8350_SID 0 #endif +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -66,6 +76,19 @@ status = "disabled"; }; + pmk8350_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + pmk8350_gpios: gpio@b000 { compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; reg = <0xb000>; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi index 201efeda7d2d..8c897d4fee29 100644 --- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -8,6 +8,16 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8550: pmic@0 { compatible = "qcom,pm8550", "qcom,spmi-pmic"; @@ -42,6 +52,19 @@ status = "disabled"; }; + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + pmk8550_gpios: gpio@8800 { compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; reg = <0xb800>; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 59702ba24f35..358827c2fbd3 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -27,8 +27,8 @@ phy-handle = <&phy1>; phy-mode = "rgmii"; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy1: phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index 734438113bba..bc16d12432c1 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -1103,7 +1103,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; + compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index dc80f0bca767..39597277343c 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sm4250.dtsi" / { @@ -19,21 +20,221 @@ stdout-path = "serial0:115200n8"; }; - vph_pwr: vph-pwr-regulator { + clocks { + clk40M: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { + compatible = "regulator-fixed"; + regulator-name = "VREG_HDMI_OUT_1P2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_1v2>; + regulator-always-on; + regulator-boot-on; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + /* Main barrel jack input */ + vdc_12v: regulator-vdc-12v { + compatible = "regulator-fixed"; + regulator-name = "DC_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* 1.2V supply stepped down from the barrel jack input */ + vdc_1v2: regulator-vdc-1v2 { + compatible = "regulator-fixed"; + regulator-name = "VDC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 3.3V supply stepped down from the barrel jack input */ + vdc_3v3: regulator-vdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 5V supply stepped down from the barrel jack input */ + vdc_5v: regulator-vdc-5v { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ + vdc_vbat_som: regulator-vdc-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + /* PMI632 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; + vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; }; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l18a_1p232>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qrb4210/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qrb4210/cdsp.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -86,6 +287,7 @@ vreg_l5a_2p96: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; vreg_l6a_0p6: l6 { @@ -116,6 +318,7 @@ vreg_l11a_1p8: l11 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1952000>; + regulator-allow-set-load; }; vreg_l12a_1p8: l12 { @@ -190,6 +393,10 @@ }; &sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l24a_2p96>; vqmmc-supply = <&vreg_l11a_1p8>; no-sdio; @@ -199,7 +406,12 @@ }; &sdhc_2 { - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */ + + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l22a_2p96>; vqmmc-supply = <&vreg_l5a_2p96>; no-sdio; @@ -207,21 +419,78 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40M>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &sleep_clk { clock-frequency = <32000>; }; &tlmm { - gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, - <49 1>, <52 1>, <54 1>, + gpio-reserved-ranges = <43 2>, <49 1>, <54 1>, <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart4 { status = "okay"; }; +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l15a_3p128>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 339fea522509..02d04ce877c9 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -47,29 +47,6 @@ vin-supply = <&vreg_3p3>; }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - snps,tx-sched-wrr; - - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - }; }; &apps_rsc { @@ -352,19 +329,40 @@ max-speed = <1000>; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; /* Micrel KSZ9031RNZ PHY */ rgmii_phy: phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x7>; - interrupt-parent = <&tlmm>; - interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; - compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..21e9eaf914dd 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -151,6 +151,184 @@ }; }; +ðernet0 { + snps,mtl-rx-config = <ðernet0_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet0_mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + reg = <0x8>; + + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; + + ethernet0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <ðernet1_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet1_mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + ethernet1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +494,66 @@ /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index 7602cca47bae..3c3b6287cd27 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -88,6 +88,14 @@ }; }; }; + + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; }; &spmi_bus { @@ -108,8 +116,6 @@ compatible = "qcom,pmk8350-pon"; reg = <0x1200>, <0x800>; reg-names = "hlos", "pbs"; - mode-recovery = <0x1>; - mode-bootloader = <0x2>; pmm8654au_0_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; @@ -135,6 +141,19 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmm8654au_0_sdam_0: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; }; pmm8654au_1: pmic@2 { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index f238a02a5448..ab767cfa51ff 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sa8775p.dtsi" @@ -18,8 +19,10 @@ serial0 = &uart10; serial1 = &uart12; serial2 = &uart17; + i2c11 = &i2c11; i2c18 = &i2c18; spi16 = &spi16; + ufshc1 = &ufs_mem_hc; }; chosen { @@ -258,6 +261,13 @@ }; }; +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + &i2c18 { clock-frequency = <400000>; pinctrl-0 = <&qup_i2c18_default>; @@ -291,6 +301,13 @@ "BT_EN", "USB2_PWR_EN", "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_2_gpios { @@ -306,6 +323,20 @@ "USB1_PWR_ENABLE", "USB1_FAULT", "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_3_gpios { @@ -347,6 +378,13 @@ bias-disable; }; + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + qup_i2c18_default: qup-i2c18-state { pins = "gpio95", "gpio96"; function = "qup2_se4"; @@ -426,6 +464,94 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 2343df7e0ea4..0385fc810d4c 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -7,7 +7,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -288,6 +290,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -449,8 +456,8 @@ <0>, <0>, <0>, - <0>, - <0>, + <&usb_0_qmpphy>, + <&usb_1_qmpphy>, <0>, <0>, <0>, @@ -483,6 +490,111 @@ #size-cells = <2>; status = "disabled"; + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x888000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + spi16: spi@888000 { compatible = "qcom,geni-spi"; reg = <0x0 0x00888000 0x0 0x4000>; @@ -504,6 +616,48 @@ status = "disabled"; }; + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart17: serial@88c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x0088c000 0x0 0x4000>; @@ -539,6 +693,391 @@ #size-cells = <0>; status = "disabled"; }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x890000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c20: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi20: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x403 0x0>; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x994000 0x0 0x4000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; }; qupv3_id_1: geniqup@ac0000 { @@ -553,6 +1092,189 @@ iommus = <&apps_smmu 0x443 0x0>; status = "disabled"; + i2c7: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi7: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c8: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi8: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c9: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi9: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart9: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c10: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi10: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart10: serial@a8c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a8c000 0x0 0x4000>; @@ -569,6 +1291,90 @@ status = "disabled"; }; + i2c11: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi11: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c12: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi12: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart12: serial@a94000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a94000 0x0 0x4000>; @@ -583,6 +1389,376 @@ power-domains = <&rpmhpd SA8775P_CX>; status = "disabled"; }; + + i2c13: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_3: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xbc0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c21: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi21: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + iommus = <&apps_smmu 0x100 0x0>; + dma-coherent; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sa8775p-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe10>; + /* + * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It + * enables the CXO clock to eDP *and* UFS PHY. + */ + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_0_hsphy: phy@88e4000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e4000 0 0x120>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0_qmpphy: phy@88e8000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088e8000 0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x080 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_RISING>, + <&pdc 7 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xe000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0a0 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2: usb@a4f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xe000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x020 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -591,6 +1767,56 @@ #hwlock-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sa8775p-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -638,6 +1864,16 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + #clock-cells = <0>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -809,6 +2045,80 @@ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_smmu: iommu@15200000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15200000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ @@ -820,6 +2130,13 @@ redistributor-stride = <0x0 0x20000>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + memtimer: timer@17c20000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts new file mode 100644 index 000000000000..2a80f4090085 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "Acer Aspire 1"; + compatible = "acer,aspire1", "qcom,sc7180"; + chassis-type = "laptop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + zap_mem: zap-shader@80840000 { + reg = <0x0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0x0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&_sd_mode_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86_bridge 1000000>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&soc_bkoff_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p2: bridge-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p2_en_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p8: bridge-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_l8c_1p8>; + + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p8_en_default>; + pinctrl-names = "default"; + }; + + reg_codec_3p3: codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "codec_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_audio_en_default>; + pinctrl-names = "default"; + }; + + reg_lcm_3p3: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcm_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_lcm_en_default>; + pinctrl-names = "default"; + }; + + reg_tp_3p3: touchpad-regulator { + compatible = "regulator-fixed"; + regulator-name = "tp_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tp_en_default>; + pinctrl-names = "default"; + }; +}; + +&dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* embedded-controller@76 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* + * NOTE: DSDT defines two possible touchpads, other one is + * + * reg = <0x15>; + * hid-descr-addr = <0x1>; + */ + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + vdd-supply = <®_tp_3p3>; + + interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_touchpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_keyboard_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&codec_irq_default>; + pinctrl-names = "default"; + + AVDD-supply = <&vreg_l15a_1p8>; + MICVDD-supply = <®_codec_3p3>; + VBAT-supply = <®_codec_3p3>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&bridge_en_default>, + <&edp_bridge_irq_default>, + <&bridge_suspend_default>; + pinctrl-names = "default"; + + vpll-supply = <®_brij_1p8>; + vccio-supply = <®_brij_1p8>; + vcca-supply = <®_brij_1p2>; + vcc-supply = <®_brij_1p2>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <®_lcm_3p3>; + backlight = <&backlight>; + hpd-absent-delay-ms = <200>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&zap_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&pm6150_adc { + thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + charger-thermistor@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&uart3 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + peer-hub = <&usb_hub_3_x>; + }; + + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&qup_i2c2_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c4_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c9_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c10_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + amp_sd_mode_default: amp-sd-mode-deault-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_en_default: bridge-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_suspend_default: bridge-suspend-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + codec_irq_default: codec-irq-deault-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bridge_irq_default: edp-bridge-irq-default-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hid_keyboard_default: hid-keyboard-default-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hid_touchpad_default: hid-touchpad-default-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_lcm_en_default: reg-lcm-en-deault-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_audio_en_default: reg-audio-en-deault-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tp_en_default: reg-tp-en-deault-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + soc_bkoff_default: soc-bkoff-deault-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <16>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 9f052270e090..bd9ed03159cf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -334,10 +334,6 @@ vdds-supply = <&vreg_l4a_0p8>; }; -&mdp { - status = "okay"; -}; - &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index ca6920de7ea8..51d6c3502f3f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -788,6 +788,10 @@ hp_i2c: &i2c9 { }; }; +&lpasscc { + status = "okay"; +}; + &lpass_cpu { status = "okay"; @@ -813,7 +817,7 @@ hp_i2c: &i2c9 { }; }; -&mdp { +&lpass_hm { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index ea1ffade1aa1..af90052c5a8a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2691,6 +2691,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; @@ -2988,8 +2989,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3627,6 +3626,8 @@ power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; lpass_cpu: lpass@62d87000 { @@ -3675,6 +3676,8 @@ #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 31728f461422..7c5dbac7ef77 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -640,6 +640,18 @@ }; }; + eud_typec: connector { + compatible = "usb-c-connector"; + + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -3421,6 +3433,7 @@ phy-names = "usb2-phy"; maximum-speed = "high-speed"; usb-role-switch; + port { usb2_role_switch: endpoint { remote-endpoint = <&eud_ep>; @@ -3432,6 +3445,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x1000>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -3596,10 +3610,11 @@ }; eud: eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; - reg = <0 0x088e0000 0 0x2000>, - <0 0x088e2000 0 0x1000>; + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3610,6 +3625,7 @@ remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { @@ -3619,21 +3635,6 @@ }; }; - eud_typec: connector { - compatible = "usb-c-connector"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - con_eud: endpoint { - remote-endpoint = <&eud_con>; - }; - }; - }; - }; - nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts new file mode 100644 index 000000000000..fe3b366e1435 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Lenovo Flex 5G"; + compatible = "lenovo,flex-5g", "qcom,sc8180x"; + + aliases { + serial0 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bl_pwm_default>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_active_state>; + pinctrl-names = "default"; + + lid { + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x3000000>; + no-map; + }; + + adsp_mem: adsp-region@90800000 { + reg = <0x0 0x90800000 0x0 0x1c00000>; + no-map; + }; + + gpu_mem: gpu-region@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + cdsp_mem: cdsp-region@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-0 = <&edp_hpd_active>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + no-hpd; + + backlight = <&backlight>; + + ports { + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b140han06_in>; + }; + }; + }; +}; + +&pcie3 { + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie3_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + memory-region = <&cdsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn"; + + status = "okay"; +}; + +&uart13 { + pinctrl-0 = <&uart13_state>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + i2c1_active: i2c1-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + bias-pull-up = <1>; + drive-strength = <2>; + }; + + i2c1_hid_active: i2c1-hid-active-state { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_active: i2c7-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_hid_active: i2c7-hid-active-state { + pins = "gpio37", "gpio24"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcie3_default_state: pcie3-default-state { + clkreq-pins { + pins = "gpio179"; + function = "pci_e3"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio178"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio180"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi new file mode 100644 index 000000000000..8247af01c84a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/ { + thermal-zones { + pmc8180-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmc8180c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180c_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmc8180_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pmc8180_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pmc8180_gpios: gpio@c000 { + compatible = "qcom,pmc8180-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmc8180", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@2 { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin2"; + }; + }; + }; + + pmic@6 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@a { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin"; + }; + }; + }; + + pmic@4 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmc8180c_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180c_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180c_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmc8180c_gpios: gpio@c000 { + compatible = "qcom,pmc8180c-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmc8180c", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + + pmc8180c_lpg: lpg { + compatible = "qcom,pmc8180c-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts new file mode 100644 index 000000000000..cca663bcb92d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -0,0 +1,706 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Qualcomm SC8180x Primus"; + compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; + + aliases { + serial0 = &uart12; + serial1 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_default>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_active_state>; + + lid-switch { + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + adsp_mem: adsp-region@96e00000 { + reg = <0x0 0x96e00000 0x0 0x1c00000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + gpu_mem: gpu-region@98a00000 { + reg = <0x0 0x98a00000 0x0 0x2000>; + no-map; + }; + + reserved-region@9a500000 { + reg = <0x0 0x9a500000 0x0 0x600000>; + no-map; + }; + }; + + vreg_nvme_0p9: nvme-0p9-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_0p9"; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-always-on; + }; + + vreg_nvme_3p3: nvme-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_3p3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8180c_gpios 11 0>; + enable-active-high; + + regulator-always-on; + }; + + vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_kb_tp_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_tp_3v3_en_active_state>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p8: smps8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_3p3: ldo4 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12e: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_i2c_active_state>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + vdd-supply = <&vreg_l4c_3p3>; + vddl-supply = <&vreg_l12e>; + + post-power-on-delay-ms = <20>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_active_state>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&aux_i2c_active_state>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd_active>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + + ports { + port { + auo_b133han05_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b133han05_in>; + }; + }; + }; +}; + +&pcie1 { + perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/qcmpss8180.mbn"; + + status = "okay"; +}; + +&uart12 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&uart13_state>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + aux_i2c_active_state: aux-i2c-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-disable; + drive-strength = <16>; + }; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + kb_int_active_state: kb-int-active-state { + int-n-pins { + pins = "gpio37"; + function = "gpio"; + + bias-pull-up; + intput-enable; + }; + + kp-disable-pins { + pins = "gpio135"; + function = "gpio"; + + output-high; + }; + }; + + kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state { + pins = "gpio4"; + function = "gpio"; + + bias-disable; + }; + + pcie2_default_state: pcie2-default-state { + clkreq-pins { + pins = "gpio176"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio175"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio177"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + tp_int_active_state: tp-int-active-state { + tp-int-pins { + pins = "gpio24"; + function = "gpio"; + + bias-disable; + input-enable; + }; + + tp-close-n-pins { + pins = "gpio116"; + function = "gpio"; + + bias-disable; + input-enable; + }; + }; + + ts_active_state: ts-active-state { + int-n-pins { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + reset-n-pins { + pins = "gpio54"; + function = "gpio"; + + output-high; + }; + }; + + ts_i2c_active_state: ts-i2c-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + /* External pull up */ + bias-disable; + drive-strength = <2>; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi new file mode 100644 index 000000000000..e8613a00fcab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -0,0 +1,4030 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,dispcc-sm8250.h> +#include <dt-bindings/clock/qcom,gcc-sc8180x.h> +#include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sc8180x.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_300: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_400: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_500: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_600: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_700: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <800000 15974400>; + }; + + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <2188000 25804800>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <2188000 31948800>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <3072000 31948800>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 15974400>; + }; + + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 19660800>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 22732800>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 25804800>; + }; + + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <4068000 43008000>; + }; + + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 49152000>; + }; + + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 49152000>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <8368000 49152000>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2918400000 { + opp-hz = /bits/ 64 <2918400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8180x", "qcom,scm"; + }; + }; + + camnoc_virt: interconnect-camnoc-virt { + compatible = "qcom,sc8180x-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8180x-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_virt: interconnect-qup-virt { + compatible = "qcom,sc8180x-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: xbl@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: aop@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: cmd-db@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + reserved@85f40000 { + reg = <0x0 0x85f40000 0x0 0x10000>; + no-map; + }; + + smem_mem: smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + reserved@89b00000 { + reg = <0x0 0x89b00000 0x0 0x1c00000>; + no-map; + }; + + reserved@9d400000 { + reg = <0x0 0x9d400000 0x0 0x1000000>; + no-map; + }; + + reserved@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + + reserved@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_ipa_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_ipa_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_wlan_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8180x"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x4c3 0>; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x603 0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c16: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart16: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x7a3 0>; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@c80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@c84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart19: serial@c88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart13: serial@c8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart14: serial@c90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart15: serial@c94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sc8180x-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc8180x-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc8180x-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sc8180x-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sc8180x-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc8180x-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy-wrapper@1c06000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx0 */ + <0 0x1c06400 0 0x200>, /* rx0 */ + <0 0x1c06a00 0 0x1f0>, /* pcs */ + <0 0x1c06600 0 0x170>, /* tx1 */ + <0 0x1c06800 0 0x200>, /* rx1 */ + <0 0x1c06e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie3: pci@1c08000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <3>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_3_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie3_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3_phy: phy-wrapper@1c0c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c0c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie3_lane: phy@1c0c200 { + reg = <0 0x1c0c200 0 0x170>, /* tx0 */ + <0 0x1c0c400 0 0x200>, /* rx0 */ + <0 0x1c0ca00 0 0x1f0>, /* pcs */ + <0 0x1c0c600 0 0x170>, /* tx1 */ + <0 0x1c0c800 0 0x200>, /* rx1 */ + <0 0x1c0ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_3_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie1: pci@1c10000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x68000000 0 0xf1d>, + <0 0x68000f20 0 0xa8>, + <0 0x68001000 0 0x1000>, + <0 0x68100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>, + <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy-wrapper@1c16000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + pcie2: pci@1c18000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c18000 0 0x3000>, + <0 0x70000000 0 0xf1d>, + <0 0x70000f20 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy-wrapper@1c1c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c1c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: phy@1c0e200 { + reg = <0 0x1c1c200 0 0x170>, /* tx0 */ + <0 0x1c1c400 0 0x200>, /* rx0 */ + <0 0x1c1ca00 0 0x1f0>, /* pcs */ + <0 0x1c1c600 0 0x170>, /* tx1 */ + <0 0x1c1c800 0 0x200>, /* rx1 */ + <0 0x1c1ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc8180x-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x300 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy-wrapper@1d87000 { + compatible = "qcom,sc8180x-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sc8180x-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + gpu: gpu@2c00000 { + compatible = "qcom,adreno-680.1", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0xc01>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-461000000 { + opp-hz = /bits/ 64 <461000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-405000000 { + opp-hz = /bits/ 64 <405000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-177000000 { + opp-hz = /bits/ 64 <177000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible="qcom,adreno-gmu-680.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", + "gmu_pdc", + "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0xc00>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sc8180x-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sc8180x-tlmm"; + reg = <0 0x03100000 0 0x300000>, + <0 0x03500000 0 0x700000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "east", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 191>; + wakeup-parent = <&pdc>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc8180x-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>, + <&rpmhpd SC8180X_MSS>; + power-domain-names = "cx", "mss"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sc8180x-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + + usb_prim_hsphy: phy@88e2000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_sec_hsphy: phy@88e3000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_prim_qmpphy: phy@88e9000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_prim_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + }; + + usb_prim_dpphy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_sec_qmpphy: phy@88ee000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088ee000 0 0x18c>, + <0 0x088ed000 0 0x10>, + <0 0x088ef000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_sec_ssphy: usb3-phy@88e9200 { + reg = <0 0x088ee200 0 0x200>, + <0 0x088ee400 0 0x200>, + <0 0x088eec00 0 0x218>, + <0 0x088ee600 0 0x200>, + <0 0x088ee800 0 0x200>, + <0 0x088eea00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + }; + + usb_sec_dpphy: dp-phy@88ef200 { + reg = <0 0x088ef200 0 0x200>, + <0 0x088ef400 0 0x200>, + <0 0x088efa00 0 0x200>, + <0 0x088ef600 0 0x200>, + <0 0x088ef800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + clock-output-names = "qmp_dptx1_phy_pll_link_clk", + "qmp_dptx1_phy_pll_vco_div_clk"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8180x-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sc8180x-gem-noc"; + reg = <0 0x09680000 0 0x58200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_prim: usb@a6f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc USB30_PRIM_GDSC>; + + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_prim_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x140 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_sec: usb@a8f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_SEC_BCR>; + power-domains = <&gcc USB30_SEC_GDSC>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_sec_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sc8180x-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "nrt_bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x800 0x420>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sc8180x-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + + port@4 { + reg = <4>; + dpu_intf4_out: endpoint { + remote-endpoint = <&dp1_in>; + }; + }; + + port@5 { + reg = <5>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae90a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>; + + phys = <&usb_prim_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae98a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <13>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>; + assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>; + + phys = <&usb_sec_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp1_in: endpoint { + remote-endpoint = <&dpu_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp: displayport-controller@ae9a000 { + compatible = "qcom,sc8180x-edp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9aa00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <14>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>; + + phys = <&edp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC8180X_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + edp_phy: phy@aec2a00 { + compatible = "qcom,sc8180x-edp-phy"; + reg = <0 0x0aec2a00 0 0x1c0>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x19c>; + + clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + power-domains = <&dispcc MDSS_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc8180x-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_prim_dpphy 0>, + <&usb_prim_dpphy 1>, + <&usb_sec_dpphy 0>, + <&usb_sec_dpphy 1>, + <&edp_phy 0>, + <&edp_phy 1>; + clock-names = "bi_tcxo", + "sleep_clk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SC8180X_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8180x-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <9>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>; + + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sc8180x-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc8180x-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17c21000{ + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c26000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8180x-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8180x-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sc8180x-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + lmh@18350800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh@18358800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0640 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 5b25d54b9591..cd7e0097d8bc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -64,7 +64,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -99,7 +99,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -308,6 +308,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7c: ldo7 { regulator-name = "vreg_l7c"; regulator-min-microvolt = <2504000>; @@ -318,6 +325,13 @@ RPMH_REGULATOR_MODE_HPM>; }; + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l13c: ldo13 { regulator-name = "vreg_l13c"; regulator-min-microvolt = <3072000>; @@ -386,7 +400,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -395,7 +409,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -600,6 +614,19 @@ status = "okay"; }; +&sdc2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &uart17 { compatible = "qcom,geni-debug-uart"; @@ -644,9 +671,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -671,9 +708,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; @@ -842,6 +889,60 @@ }; }; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index bdcba719fc38..5ae057ad6438 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -106,7 +106,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -141,7 +141,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -528,7 +528,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -537,7 +537,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -1114,9 +1114,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -1141,9 +1151,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 8fa9fbfe5d00..4f64adadcdb5 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -768,6 +768,36 @@ ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; + ethernet0: ethernet@20000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC0_AXI_CLK>, + <&gcc GCC_EMAC0_SLV_AHB_CLK>, + <&gcc GCC_EMAC0_PTP_CLK>, + <&gcc GCC_EMAC0_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x4c0 0xf>; + power-domains = <&gcc EMAC_0_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + gcc: clock-controller@100000 { compatible = "qcom,gcc-sc8280xp"; reg = <0x0 0x00100000 0x0 0x1f0000>; @@ -2815,6 +2845,49 @@ }; }; + sdc2: mmc@8804000 { + compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4e0 0x0>; + power-domains = <&rpmhpd SC8280XP_CX>; + operating-points-v2 = <&sdc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + usb_0_qmpphy: phy@88eb000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; reg = <0 0x088eb000 0 0x4000>; @@ -2835,6 +2908,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_0_qmpphy_dp_in: endpoint {}; + }; + }; }; usb_1_hsphy: phy@8902000 { @@ -2871,6 +2961,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; + }; }; mdss1_dp0_phy: phy@8909a00 { @@ -3895,7 +4002,7 @@ #size-cells = <2>; ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; reg = <0 0x17a40000 0 0x20000>; msi-controller; @@ -4706,6 +4813,36 @@ status = "disabled"; }; + + ethernet1: ethernet@23000000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x23000000 0x0 0x10000>, + <0x0 0x23016000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC1_AXI_CLK>, + <&gcc GCC_EMAC1_SLV_AHB_CLK>, + <&gcc GCC_EMAC1_PTP_CLK>, + <&gcc GCC_EMAC1_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x40 0xf>; + power-domains = <&gcc EMAC_1_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; }; sound: sound { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 2ca713a3902a..3033723fc6ff 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -138,11 +138,6 @@ no-map; }; - reserved@85800000 { - reg = <0x00 0x85800000 0x00 0x3700000>; - no-map; - }; - cont_splash_mem: splash@9d400000 { reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; no-map; @@ -256,6 +251,10 @@ linux,code = <KEY_VOLUMEUP>; }; +&qhee_code { + reg = <0x00 0x85800000 0x00 0x3700000>; +}; + &qusb2phy0 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 37e72b1c56dc..a7d475f23bea 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -548,7 +548,7 @@ }; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1892,7 +1892,7 @@ }; }; - camss: camss@ca00000 { + camss: camss@ca00020 { compatible = "qcom,sdm660-camss"; reg = <0x0ca00020 0x10>, <0x0ca30000 0x100>, diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 70e683b7e4fc..301eca9a4f31 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -4,8 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sdm632.dtsi" #include "pm8953.dtsi" +#include "pmi632.dtsi" / { model = "Fairphone 3"; @@ -83,6 +85,33 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index e14fe9bbb386..4dea2c04b22f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -419,6 +419,9 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; + qcom,dual-dsi-mode; + qcom,master-dsi; + ports { port@1 { endpoint { @@ -434,6 +437,31 @@ vdds-supply = <&vreg_l1a_0p875>; }; +&dsi1 { + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l1a_0p875>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -493,6 +521,14 @@ }; }; + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + port@2 { reg = <2>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 0ad891348e0c..1eaff964b202 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -554,6 +554,28 @@ }; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; +}; + &qup_uart9_rx { drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 8ae0ffccaab2..576f0421824f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -483,6 +483,7 @@ }; rmi4-f12@12 { + reg = <0x12>; syna,rezero-wait-ms = <0xc8>; syna,clip-x-high = <0x438>; syna,clip-y-high = <0x870>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 90424442bb4a..f1dfdd129eab 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3890,6 +3890,7 @@ qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; + iommus = <&apps_smmu 0x160 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -4229,7 +4230,7 @@ #reset-cells = <1>; }; - camss: camss@a00000 { + camss: camss@acb3000 { compatible = "qcom,sdm845-camss"; reg = <0 0x0acb3000 0 0x1000>, @@ -5212,7 +5213,7 @@ }; slimbam: dma-controller@17184000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; num-channels = <31>; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a1f0622db5a0..75951fd439df 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -242,6 +242,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts new file mode 100644 index 000000000000..3ce9875e932c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" +#include <dt-bindings/arm/qcom,ids.h> + +/ { + model = "F(x)tec Pro1X (QX1050)"; + compatible = "fxtec,pro1x", "qcom,sm6115"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6a: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + pm6125_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + pm6125_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + pm6125_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l23a: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vddp-ref-clk-supply = <&pm6125_l18a>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vdda-phy-dpdm-supply = <&pm6125_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 631ca327e064..ba889cc44cb7 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -47,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -63,6 +65,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -75,6 +79,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -87,6 +93,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; CPU4: cpu@100 { @@ -99,6 +107,8 @@ dynamic-power-coefficient = <282>; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -115,6 +125,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; }; CPU6: cpu@102 { @@ -127,6 +139,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; }; CPU7: cpu@103 { @@ -139,6 +153,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; }; cpu-map { @@ -178,6 +194,68 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <297>; + exit-latency-us = <324>; + min-residency-us = <1110>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_0_SLEEP_0: cluster-sleep-0-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000022>; + entry-latency-us = <360>; + exit-latency-us = <421>; + min-residency-us = <782>; + }; + + CLUSTER_0_SLEEP_1: cluster-sleep-0-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + + CLUSTER_1_SLEEP_0: cluster-sleep-1-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000042>; + entry-latency-us = <314>; + exit-latency-us = <345>; + min-residency-us = <660>; + }; + + CLUSTER_1_SLEEP_1: cluster-sleep-1-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <640>; + exit-latency-us = <1654>; + min-residency-us = <8094>; + }; + }; }; firmware { @@ -201,6 +279,64 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_0_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>; + }; + + CLUSTER_1_PD: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>; + }; }; reserved_memory: reserved-memory { @@ -661,6 +797,62 @@ status = "disabled"; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + usb_qmpphy: phy@1615000 { + compatible = "qcom,sm6115-qmp-usb3-phy"; + reg = <0x0 0x01615000 0x0 0x1000>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "cfg_ahb", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -698,7 +890,7 @@ #interrupt-cells = <4>; }; - tsens0: thermal-sensor@4410000 { + tsens0: thermal-sensor@4411000 { compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ <0x0 0x04410000 0x0 0x8>; /* SROT */ @@ -1111,8 +1303,8 @@ compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_hsphy>; - phy-names = "usb2-phy"; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index ea3340d31110..81fdcaf48926 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -306,6 +306,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index b1038eb8cebc..a7f4aeae9c1a 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -138,7 +138,7 @@ pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; - adc-chan@4d { + channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -146,7 +146,7 @@ label = "rf_pa0_therm"; }; - adc-chan@4e { + channel@4e { reg = <ADC5_AMUX_THM2_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -154,7 +154,7 @@ label = "quiet_therm"; }; - adc-chan@52 { + channel@52 { reg = <ADC5_GPIO1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -162,7 +162,7 @@ label = "camera_flash_therm"; }; - adc-chan@54 { + channel@54 { reg = <ADC5_GPIO3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 9484752fb850..745874a82a49 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -364,7 +364,7 @@ hwlocks = <&tcsr_mutex 3>; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00 0xffffffff>; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 18c4616848ce..4dffd7974fa3 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1891,28 +1891,6 @@ }; }; - wifi: wifi@18800000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0 0x18800000 0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_fw_mem>; - interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x20 0x1>; - qcom,msa-fixed-perm; - status = "disabled"; - }; - apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -2010,6 +1988,28 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 47e2430991ca..baafea53770b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8150.dtsi" #include "pm8150.dtsi" @@ -81,6 +82,66 @@ }; }; + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -456,6 +517,17 @@ }; &pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + vol_down_n: vol-down-n-state { pins = "gpio1"; function = "normal"; @@ -463,9 +535,31 @@ bias-pull-up; input-enable; }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; }; &pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + snapshot_n: snapshot-n-state { pins = "gpio1"; function = "normal"; @@ -483,6 +577,30 @@ }; }; +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -500,8 +618,225 @@ status = "okay"; }; +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart2 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2273fa571988..2a5b2b99968a 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1353,14 +1353,11 @@ uart9: serial@a84000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a84000 0x0 0x4000>; - reg-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart9_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1817,7 +1814,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1912,7 +1909,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2088,6 +2085,36 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -3977,7 +4004,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 2f22d348d45d..8d4352c8c543 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -672,3 +672,8 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p9>; }; + +&venus { + firmware-name = "qcom/sm8250/Sony/edo/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 8af6a0120a50..eaac00085894 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -504,7 +504,6 @@ remote-endpoint = <&dsi1_out>; }; }; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 7bea916900e2..e5c60a6e4074 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2232,6 +2232,38 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -5254,7 +5286,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 2ee1b121686a..d3788bd72ac3 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -58,7 +58,15 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; @@ -326,6 +334,37 @@ }; }; +&i2c13 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &i2c15 { clock-frequency = <400000>; status = "okay"; @@ -370,6 +409,21 @@ status = "okay"; }; +&mdss_dp { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; +}; + &mdss_mdp { status = "okay"; }; @@ -416,6 +470,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &qupv3_id_2 { status = "okay"; }; @@ -716,7 +774,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -732,6 +790,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p88>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &usb_2 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index ebcb481571c2..d2024ba5a754 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -898,7 +898,7 @@ }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@9800000 { compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x09800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, @@ -1629,7 +1629,7 @@ status = "disabled"; }; - pcie1_phy: phy@1c0f000 { + pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; reg = <0 0x01c0e000 0 0x2000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, @@ -1726,6 +1726,28 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8350-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sm8350-ipa"; @@ -2131,7 +2153,7 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8350-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -2149,6 +2171,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2_qmpphy: phy-wrapper@88eb000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index e931545a2cac..d5aeb7319776 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -114,9 +114,18 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; }; }; @@ -494,6 +503,37 @@ }; }; +&i2c5 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &mdss { status = "okay"; }; @@ -513,6 +553,21 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; +}; + &mdss_mdp { status = "okay"; }; @@ -766,7 +821,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -782,6 +837,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &vamacro { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 595533aeafc4..ca147bad902b 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/clock/qcom,sm8450-dispcc.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -2044,6 +2045,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; remoteproc_slpi: remoteproc@2400000 { @@ -2572,6 +2599,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8450-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac15000 { compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; reg = <0 0x0ac15000 0 0x1000>; @@ -3993,31 +4032,43 @@ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp5 { + rpmhpd_opp_low_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp6 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp6 { + rpmhpd_opp_svs_l0: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp8 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp7 { + rpmhpd_opp_svs_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp10 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp8 { + rpmhpd_opp_nom_l1: opp11 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp9 { + rpmhpd_opp_nom_l2: opp12 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp10 { + rpmhpd_opp_turbo: opp13 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp11 { + rpmhpd_opp_turbo_l1: opp14 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; @@ -4138,6 +4189,34 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + sdhc_2: mmc@8804000 { compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index e2b9bb6b1e27..579f65f52370 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -23,6 +23,32 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -393,10 +419,6 @@ }; }; -&dispcc { - status = "okay"; -}; - &mdss { status = "okay"; }; @@ -437,10 +459,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; @@ -535,6 +553,28 @@ clock-frequency = <32000>; }; +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; @@ -565,6 +605,14 @@ drive-strength = <2>; bias-pull-down; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index d5a645ee2a61..8669d29144bb 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8550.dtsi" #include "pm8010.dtsi" @@ -23,10 +24,70 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -359,6 +420,111 @@ }; }; +&gcc { + clocks = <&bi_tcxo_div2>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <0>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + pinctrl-names = "default", "sleep"; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + status = "disabled"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -385,8 +551,66 @@ clock-frequency = <32000>; }; +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { @@ -417,13 +641,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 6e9bad8f6f33..20924d570c07 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -4,7 +4,9 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> +#include <dt-bindings/clock/qcom,sm8550-gpucc.h> #include <dt-bindings/clock/qcom,sm8550-tcsr.h> #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -1839,7 +1841,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -1849,7 +1851,7 @@ <&apps_smmu 0x481 0x0>; }; - crypto: crypto@1de0000 { + crypto: crypto@1dfa000 { compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce"; reg = <0x0 0x01dfa000 0x0 0x6000>; dmas = <&cryptobam 4>, <&cryptobam 5>; @@ -1951,6 +1953,17 @@ #reset-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8550-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -2385,6 +2398,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8550-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -2684,7 +2709,6 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - status = "disabled"; }; usb_1_hsphy: phy@88e3000 { @@ -2874,7 +2898,7 @@ #interrupt-cells = <4>; }; - tlmm: pinctrl@f000000 { + tlmm: pinctrl@f100000 { compatible = "qcom,sm8550-tlmm"; reg = <0 0x0f100000 0 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -3608,43 +3632,63 @@ rpmhpd_opp_table: opp-table { compatible = "operating-points-v2"; - rpmhpd_opp_ret: opp1 { + rpmhpd_opp_ret: opp-16 { opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; }; - rpmhpd_opp_min_svs: opp2 { + rpmhpd_opp_min_svs: opp-48 { opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_low_svs: opp3 { + rpmhpd_opp_lov_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_lov_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_lov_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp4 { + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp5 { + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp6 { + rpmhpd_opp_nom: opp-256 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp7 { + rpmhpd_opp_nom_l1: opp-320 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp8 { + rpmhpd_opp_nom_l2: opp-336 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp9 { + rpmhpd_opp_turbo: opp-384 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp10 { + rpmhpd_opp_turbo_l1: opp-416 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi index 2d92b56ac94d..d0c9387ac17a 100644 --- a/arch/arm64/boot/dts/realtek/rtd1293.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -30,6 +30,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 1402abe80ea1..b7f63102f2dd 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi index fb864a139c97..4f805f576cef 100644 --- a/arch/arm64/boot/dts/realtek/rtd1296.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi index 05c9216a87ee..2efe5b25c83c 100644 --- a/arch/arm64/boot/dts/realtek/rtd1395.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi @@ -44,6 +44,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi index bf4d9e917925..34802cc62983 100644 --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi @@ -88,11 +88,15 @@ l2: l2-cache { compatible = "cache"; next-level-cache = <&l3>; + cache-level = <2>; + cache-unified; }; l3: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index f130165577a8..7114cbbd8713 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -79,10 +79,12 @@ dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index c21b78685123..9065dc243428 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2359,8 +2359,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2371,6 +2371,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2386,8 +2388,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2398,6 +2400,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 82216ce7a92a..75776decd218 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2238,8 +2238,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2250,6 +2250,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2265,8 +2267,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2277,6 +2279,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 10abfde329d0..ad2e87b039ac 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1704,8 +1704,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -1716,6 +1716,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 2828e05b40b3..2acf4067ab2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -2471,8 +2471,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2483,6 +2483,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2498,8 +2500,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2510,6 +2512,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 10b91e9733bf..6d15229d25ab 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -2778,8 +2778,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2790,6 +2790,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2805,8 +2807,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2817,6 +2819,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 3ea8572e917f..17062ec506be 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -2565,8 +2565,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2577,6 +2577,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2592,8 +2594,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2604,6 +2606,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index d52cb0b67d80..d3f47da1b626 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -2445,8 +2445,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2457,6 +2457,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2472,8 +2474,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2484,6 +2486,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9584115c6b17..c75820038491 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2423,8 +2423,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -2435,6 +2435,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2450,8 +2452,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -2462,6 +2464,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index c4ac28a0f716..5ed2daaca1f0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1386,7 +1386,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; @@ -1399,6 +1400,8 @@ resets = <&cpg 319>; phys = <&pcie_phy>; phy-names = "pcie"; + iommu-map = <0 &ipmmu_vi0 5 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4529e9b57c33..1be0b99c15ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1870,8 +1870,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; @@ -1882,6 +1882,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index bf587a14ec19..4e67a0356497 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -943,6 +943,56 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", "renesas,rcar-gen4-scif", "renesas,scif"; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 1315be5167b9..232910e07444 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -174,6 +174,76 @@ #size-cells = <2>; ranges; + mtu3: timer@10001200 { + compatible = "renesas,r9a07g044-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x10001200 0 0xb00>; + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tgiv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + status = "disabled"; + }; + ssi0: ssi@10049c00 { compatible = "renesas,r9a07g044-ssi", "renesas,rz-ssi"; @@ -697,6 +767,59 @@ }; }; + dsi: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", + "renesas,rzg2l-mipi-dsi"; + reg = <0 0x10850000 0 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + status = "disabled"; + }; + + vspd: vsp@10870000 { + compatible = "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g044-fcpvd", + "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..f983bdd3ea30 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2LC SMARC EVK with + * OV5645 camera connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso index d834bff9bda2..736c1e688cc8 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree overlay for the RZ/G2L SMARC EVK with OV5645 camera + * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera * connected to CSI and CRU enabled. * * Copyright (C) 2023 Renesas Electronics Corp. diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index cc11e5855d62..2eba3a8a100d 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -174,6 +174,76 @@ #size-cells = <2>; ranges; + mtu3: timer@10001200 { + compatible = "renesas,r9a07g054-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x10001200 0 0xb00>; + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tgiv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + status = "disabled"; + }; + ssi0: ssi@10049c00 { compatible = "renesas,r9a07g054-ssi", "renesas,rz-ssi"; @@ -623,6 +693,139 @@ status = "disabled"; }; + cru: video@10830000 { + compatible = "renesas,r9a07g054-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G054_CRU_VCLK>, + <&cpg CPG_MOD R9A07G054_CRU_PCLK>, + <&cpg CPG_MOD R9A07G054_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G054_CRU_PRESETN>, + <&cpg R9A07G054_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + cruparallel: endpoint@0 { + reg = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g054-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G054_CRU_VCLK>, + <&cpg CPG_MOD R9A07G054_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G054_CRU_PRESETN>, + <&cpg R9A07G054_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + + dsi: dsi@10850000 { + compatible = "renesas,r9a07g054-mipi-dsi", + "renesas,rzg2l-mipi-dsi"; + reg = <0 0x10850000 0 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G054_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G054_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G054_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G054_MIPI_DSI_ARESET_N>, + <&cpg R9A07G054_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + status = "disabled"; + }; + + vspd: vsp@10870000 { + compatible = "renesas,r9a07g054-vsp2", + "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g054-fcpvd", + "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_LCDC_RESET_N>; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g054-cpg"; reg = <0 0x11010000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso new file mode 120000 index 000000000000..0f175341d3ed --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1 @@ +r9a07g044l2-smarc-cru-csi-ov5645.dtso
\ No newline at end of file diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index e180a955b6ac..2a158a954b2f 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -16,12 +16,91 @@ serial1 = &scif2; i2c3 = &i2c3; }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; }; &cpu_dai { sound-dai = <&ssi0>; }; +&dsi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index b6bd27196d88..6818fd49b2be 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -17,6 +17,23 @@ serial1 = &scif1; i2c2 = &i2c2; }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; }; #if (SW_SCIF_CAN || SW_RSPI_CAN) @@ -36,6 +53,68 @@ sound-dai = <&ssi0>; }; +&dsi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index efc80960380f..3885ef3454ff 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -10,6 +10,7 @@ aliases { serial1 = &hscif0; serial2 = &scif1; + serial3 = &hscif1; mmc2 = &sdhi3; }; @@ -114,6 +115,14 @@ status = "okay"; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -366,8 +375,13 @@ function = "hscif0"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + scif1_pins: scif1 { - groups = "scif1_data_b", "scif1_ctrl"; + groups = "scif1_data_b"; function = "scif1"; }; @@ -397,7 +411,6 @@ &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index dc12350b9fc8..53d616c3cfed 100644 --- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -64,6 +64,8 @@ l2: cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; idle-states { diff --git a/arch/arm64/include/asm/arm_pmuv3.h b/arch/arm64/include/asm/arm_pmuv3.h index d6b51deb7bf0..18dc2fb3d7b7 100644 --- a/arch/arm64/include/asm/arm_pmuv3.h +++ b/arch/arm64/include/asm/arm_pmuv3.h @@ -13,7 +13,7 @@ #define RETURN_READ_PMEVCNTRN(n) \ return read_sysreg(pmevcntr##n##_el0) -static unsigned long read_pmevcntrn(int n) +static inline unsigned long read_pmevcntrn(int n) { PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); return 0; @@ -21,14 +21,14 @@ static unsigned long read_pmevcntrn(int n) #define WRITE_PMEVCNTRN(n) \ write_sysreg(val, pmevcntr##n##_el0) -static void write_pmevcntrn(int n, unsigned long val) +static inline void write_pmevcntrn(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVCNTRN); } #define WRITE_PMEVTYPERN(n) \ write_sysreg(val, pmevtyper##n##_el0) -static void write_pmevtypern(int n, unsigned long val) +static inline void write_pmevtypern(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVTYPERN); } diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 683ca3af4084..5f6f84837a49 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -126,6 +126,10 @@ #define APPLE_CPU_PART_M1_FIRESTORM_MAX 0x029 #define APPLE_CPU_PART_M2_BLIZZARD 0x032 #define APPLE_CPU_PART_M2_AVALANCHE 0x033 +#define APPLE_CPU_PART_M2_BLIZZARD_PRO 0x034 +#define APPLE_CPU_PART_M2_AVALANCHE_PRO 0x035 +#define APPLE_CPU_PART_M2_BLIZZARD_MAX 0x038 +#define APPLE_CPU_PART_M2_AVALANCHE_MAX 0x039 #define AMPERE_CPU_PART_AMPERE1 0xAC3 @@ -181,6 +185,10 @@ #define MIDR_APPLE_M1_FIRESTORM_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM_MAX) #define MIDR_APPLE_M2_BLIZZARD MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD) #define MIDR_APPLE_M2_AVALANCHE MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE) +#define MIDR_APPLE_M2_BLIZZARD_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_PRO) +#define MIDR_APPLE_M2_AVALANCHE_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_PRO) +#define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX) +#define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX) #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index 4cd6762bda80..dc3c072e862f 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -209,6 +209,7 @@ struct kvm_pgtable_visit_ctx { kvm_pte_t old; void *arg; struct kvm_pgtable_mm_ops *mm_ops; + u64 start; u64 addr; u64 end; u32 level; diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index f5bcb0dc6267..7e89968bd282 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -66,13 +66,10 @@ void mte_sync_tags(pte_t old_pte, pte_t pte) return; /* if PG_mte_tagged is set, tags have already been initialised */ - for (i = 0; i < nr_pages; i++, page++) { - if (!page_mte_tagged(page)) { + for (i = 0; i < nr_pages; i++, page++) + if (!page_mte_tagged(page)) mte_sync_page_tags(page, old_pte, check_swap, pte_is_tagged); - set_page_mte_tagged(page); - } - } /* ensure the tags are visible before the PTE is set */ smp_wmb(); diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 0119dc91abb5..d9e1355730ef 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -288,7 +288,7 @@ static int aarch32_alloc_kuser_vdso_page(void) memcpy((void *)(vdso_page + 0x1000 - kuser_sz), __kuser_helper_start, kuser_sz); - aarch32_vectors_page = virt_to_page(vdso_page); + aarch32_vectors_page = virt_to_page((void *)vdso_page); return 0; } diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c index 1279949599b5..4c9dcd8fc939 100644 --- a/arch/arm64/kvm/fpsimd.c +++ b/arch/arm64/kvm/fpsimd.c @@ -81,26 +81,34 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) fpsimd_kvm_prepare(); + /* + * We will check TIF_FOREIGN_FPSTATE just before entering the + * guest in kvm_arch_vcpu_ctxflush_fp() and override this to + * FP_STATE_FREE if the flag set. + */ vcpu->arch.fp_state = FP_STATE_HOST_OWNED; vcpu_clear_flag(vcpu, HOST_SVE_ENABLED); if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN) vcpu_set_flag(vcpu, HOST_SVE_ENABLED); - /* - * We don't currently support SME guests but if we leave - * things in streaming mode then when the guest starts running - * FPSIMD or SVE code it may generate SME traps so as a - * special case if we are in streaming mode we force the host - * state to be saved now and exit streaming mode so that we - * don't have to handle any SME traps for valid guest - * operations. Do this for ZA as well for now for simplicity. - */ if (system_supports_sme()) { vcpu_clear_flag(vcpu, HOST_SME_ENABLED); if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN) vcpu_set_flag(vcpu, HOST_SME_ENABLED); + /* + * If PSTATE.SM is enabled then save any pending FP + * state and disable PSTATE.SM. If we leave PSTATE.SM + * enabled and the guest does not enable SME via + * CPACR_EL1.SMEN then operations that should be valid + * may generate SME traps from EL1 to EL1 which we + * can't intercept and which would confuse the guest. + * + * Do the same for PSTATE.ZA in the case where there + * is state in the registers which has not already + * been saved, this is very unlikely to happen. + */ if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) { vcpu->arch.fp_state = FP_STATE_FREE; fpsimd_save_and_flush_cpu_state(); diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index c41166f1a1dd..e78a08a72a3c 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -177,9 +177,17 @@ static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code) sve_guest = vcpu_has_sve(vcpu); esr_ec = kvm_vcpu_trap_get_class(vcpu); - /* Don't handle SVE traps for non-SVE vcpus here: */ - if (!sve_guest && esr_ec != ESR_ELx_EC_FP_ASIMD) + /* Only handle traps the vCPU can support here: */ + switch (esr_ec) { + case ESR_ELx_EC_FP_ASIMD: + break; + case ESR_ELx_EC_SVE: + if (!sve_guest) + return false; + break; + default: return false; + } /* Valid trap. Switch the context: */ diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index 3d61bd3e591d..5282cb9ca4cf 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -58,8 +58,9 @@ struct kvm_pgtable_walk_data { struct kvm_pgtable_walker *walker; + const u64 start; u64 addr; - u64 end; + const u64 end; }; static bool kvm_phys_is_valid(u64 phys) @@ -201,6 +202,7 @@ static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data, .old = READ_ONCE(*ptep), .arg = data->walker->arg, .mm_ops = mm_ops, + .start = data->start, .addr = data->addr, .end = data->end, .level = level, @@ -293,6 +295,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size, struct kvm_pgtable_walker *walker) { struct kvm_pgtable_walk_data walk_data = { + .start = ALIGN_DOWN(addr, PAGE_SIZE), .addr = ALIGN_DOWN(addr, PAGE_SIZE), .end = PAGE_ALIGN(walk_data.addr + size), .walker = walker, @@ -349,7 +352,7 @@ int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr, } struct hyp_map_data { - u64 phys; + const u64 phys; kvm_pte_t attr; }; @@ -407,13 +410,12 @@ enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte) static bool hyp_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx, struct hyp_map_data *data) { + u64 phys = data->phys + (ctx->addr - ctx->start); kvm_pte_t new; - u64 granule = kvm_granule_size(ctx->level), phys = data->phys; if (!kvm_block_mapping_supported(ctx, phys)) return false; - data->phys += granule; new = kvm_init_valid_leaf_pte(phys, data->attr, ctx->level); if (ctx->old == new) return true; @@ -576,7 +578,7 @@ void kvm_pgtable_hyp_destroy(struct kvm_pgtable *pgt) } struct stage2_map_data { - u64 phys; + const u64 phys; kvm_pte_t attr; u8 owner_id; @@ -794,20 +796,43 @@ static bool stage2_pte_executable(kvm_pte_t pte) return !(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN); } +static u64 stage2_map_walker_phys_addr(const struct kvm_pgtable_visit_ctx *ctx, + const struct stage2_map_data *data) +{ + u64 phys = data->phys; + + /* + * Stage-2 walks to update ownership data are communicated to the map + * walker using an invalid PA. Avoid offsetting an already invalid PA, + * which could overflow and make the address valid again. + */ + if (!kvm_phys_is_valid(phys)) + return phys; + + /* + * Otherwise, work out the correct PA based on how far the walk has + * gotten. + */ + return phys + (ctx->addr - ctx->start); +} + static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx, struct stage2_map_data *data) { + u64 phys = stage2_map_walker_phys_addr(ctx, data); + if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1))) return false; - return kvm_block_mapping_supported(ctx, data->phys); + return kvm_block_mapping_supported(ctx, phys); } static int stage2_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx, struct stage2_map_data *data) { kvm_pte_t new; - u64 granule = kvm_granule_size(ctx->level), phys = data->phys; + u64 phys = stage2_map_walker_phys_addr(ctx, data); + u64 granule = kvm_granule_size(ctx->level); struct kvm_pgtable *pgt = data->mmu->pgt; struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops; @@ -841,8 +866,6 @@ static int stage2_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx, stage2_make_pte(ctx, new); - if (kvm_phys_is_valid(phys)) - data->phys += granule; return 0; } diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index 64c3aec0d937..0bd93a5f21ce 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -204,7 +204,7 @@ void kvm_inject_size_fault(struct kvm_vcpu *vcpu) * Size Fault at level 0, as if exceeding PARange. * * Non-LPAE guests will only get the external abort, as there - * is no way to to describe the ASF. + * is no way to describe the ASF. */ if (vcpu_el1_is_32bit(vcpu) && !(vcpu_read_sys_reg(vcpu, TCR_EL1) & TTBCR_EAE)) diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 469d816f356f..93a47a515c13 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -616,6 +616,10 @@ static const struct midr_range broken_seis[] = { MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_MAX), MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD), MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_PRO), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_PRO), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_MAX), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_MAX), {}, }; diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c index 08978d0672e7..7fe8ba1a2851 100644 --- a/arch/arm64/kvm/vmid.c +++ b/arch/arm64/kvm/vmid.c @@ -47,7 +47,7 @@ static void flush_context(void) int cpu; u64 vmid; - bitmap_clear(vmid_map, 0, NUM_USER_VMIDS); + bitmap_zero(vmid_map, NUM_USER_VMIDS); for_each_possible_cpu(cpu) { vmid = atomic64_xchg_relaxed(&per_cpu(active_vmids, cpu), 0); @@ -182,8 +182,7 @@ int __init kvm_arm_vmid_alloc_init(void) */ WARN_ON(NUM_USER_VMIDS - 1 <= num_possible_cpus()); atomic64_set(&vmid_generation, VMID_FIRST_VERSION); - vmid_map = kcalloc(BITS_TO_LONGS(NUM_USER_VMIDS), - sizeof(*vmid_map), GFP_KERNEL); + vmid_map = bitmap_zalloc(NUM_USER_VMIDS, GFP_KERNEL); if (!vmid_map) return -ENOMEM; @@ -192,5 +191,5 @@ int __init kvm_arm_vmid_alloc_init(void) void __init kvm_arm_vmid_alloc_free(void) { - kfree(vmid_map); + bitmap_free(vmid_map); } diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c index 4aadcfb01754..a7bb20055ce0 100644 --- a/arch/arm64/mm/copypage.c +++ b/arch/arm64/mm/copypage.c @@ -21,9 +21,10 @@ void copy_highpage(struct page *to, struct page *from) copy_page(kto, kfrom); + if (kasan_hw_tags_enabled()) + page_kasan_tag_reset(to); + if (system_supports_mte() && page_mte_tagged(from)) { - if (kasan_hw_tags_enabled()) - page_kasan_tag_reset(to); /* It's a new page, shouldn't have been tagged yet */ WARN_ON_ONCE(!try_page_mte_tagging(to)); mte_copy_page_tags(kto, kfrom); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 9e0db5c387e3..cb21ccd7940d 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -480,8 +480,8 @@ static void do_bad_area(unsigned long far, unsigned long esr, } } -#define VM_FAULT_BADMAP 0x010000 -#define VM_FAULT_BADACCESS 0x020000 +#define VM_FAULT_BADMAP ((__force vm_fault_t)0x010000) +#define VM_FAULT_BADACCESS ((__force vm_fault_t)0x020000) static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int mm_flags, unsigned long vm_flags, diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index e2950f5db7c9..e715df5385d6 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -413,12 +413,12 @@ extern void paging_init (void); * For the 64bit version, the offset is extended by 32bit. */ #define __swp_type(x) ((x).val & 0x1f) -#define __swp_offset(x) ( (((x).val >> 6) & 0x7) | \ - (((x).val >> 8) & ~0x7) ) +#define __swp_offset(x) ( (((x).val >> 5) & 0x7) | \ + (((x).val >> 10) << 3) ) #define __swp_entry(type, offset) ((swp_entry_t) { \ ((type) & 0x1f) | \ - ((offset & 0x7) << 6) | \ - ((offset & ~0x7) << 8) }) + ((offset & 0x7) << 5) | \ + ((offset >> 3) << 10) }) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) diff --git a/arch/parisc/kernel/kexec.c b/arch/parisc/kernel/kexec.c index 5eb7f30edc1f..db57345a9daf 100644 --- a/arch/parisc/kernel/kexec.c +++ b/arch/parisc/kernel/kexec.c @@ -4,6 +4,8 @@ #include <linux/console.h> #include <linux/kexec.h> #include <linux/delay.h> +#include <linux/reboot.h> + #include <asm/cacheflush.h> #include <asm/sections.h> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 85cde5bf04b7..771b79423bbc 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -34,8 +34,6 @@ endif BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ - $(call cc-option,-mno-prefixed) $(call cc-option,-mno-pcrel) \ - $(call cc-option,-mno-mma) \ $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ $(LINUXINCLUDE) @@ -71,6 +69,10 @@ BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc BOOTARFLAGS := -crD +BOOTCFLAGS += $(call cc-option,-mno-prefixed) \ + $(call cc-option,-mno-pcrel) \ + $(call cc-option,-mno-mma) + ifdef CONFIG_CC_IS_CLANG BOOTCFLAGS += $(CLANG_FLAGS) BOOTAFLAGS += $(CLANG_FLAGS) diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig index 7113f9355165..ad1872518992 100644 --- a/arch/powerpc/crypto/Kconfig +++ b/arch/powerpc/crypto/Kconfig @@ -96,7 +96,7 @@ config CRYPTO_AES_PPC_SPE config CRYPTO_AES_GCM_P10 tristate "Stitched AES/GCM acceleration support on P10 or later CPU (PPC)" - depends on PPC64 && CPU_LITTLE_ENDIAN + depends on PPC64 && CPU_LITTLE_ENDIAN && VSX select CRYPTO_LIB_AES select CRYPTO_ALGAPI select CRYPTO_AEAD diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index 678b5bdc79b1..34e14dfd8e04 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -205,7 +205,6 @@ extern void iommu_register_group(struct iommu_table_group *table_group, int pci_domain_number, unsigned long pe_num); extern int iommu_add_device(struct iommu_table_group *table_group, struct device *dev); -extern void iommu_del_device(struct device *dev); extern long iommu_tce_xchg(struct mm_struct *mm, struct iommu_table *tbl, unsigned long entry, unsigned long *hpa, enum dma_data_direction *direction); @@ -229,10 +228,6 @@ static inline int iommu_add_device(struct iommu_table_group *table_group, { return 0; } - -static inline void iommu_del_device(struct device *dev) -{ -} #endif /* !CONFIG_IOMMU_API */ u64 dma_iommu_get_required_mask(struct device *dev); diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 038ce8d9061d..8920862ffd79 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -144,7 +144,7 @@ static bool dma_iommu_bypass_supported(struct device *dev, u64 mask) /* We support DMA to/from any memory page via the iommu */ int dma_iommu_dma_supported(struct device *dev, u64 mask) { - struct iommu_table *tbl = get_iommu_table_base(dev); + struct iommu_table *tbl; if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) { /* @@ -162,6 +162,8 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask) return 1; } + tbl = get_iommu_table_base(dev); + if (!tbl) { dev_err(dev, "Warning: IOMMU dma not supported: mask 0x%08llx, table unavailable\n", mask); return 0; diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 0089dd49b4cb..67f0b01e6ff5 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -518,7 +518,7 @@ int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl, /* Convert entry to a dma_addr_t */ entry += tbl->it_offset; dma_addr = entry << tbl->it_page_shift; - dma_addr |= (s->offset & ~IOMMU_PAGE_MASK(tbl)); + dma_addr |= (vaddr & ~IOMMU_PAGE_MASK(tbl)); DBG(" - %lu pages, entry: %lx, dma_addr: %lx\n", npages, entry, dma_addr); @@ -905,6 +905,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, unsigned int order; unsigned int nio_pages, io_order; struct page *page; + int tcesize = (1 << tbl->it_page_shift); size = PAGE_ALIGN(size); order = get_order(size); @@ -931,7 +932,8 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, memset(ret, 0, size); /* Set up tces to cover the allocated range */ - nio_pages = size >> tbl->it_page_shift; + nio_pages = IOMMU_PAGE_ALIGN(size, tbl) >> tbl->it_page_shift; + io_order = get_iommu_order(size, tbl); mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL, mask >> tbl->it_page_shift, io_order, 0); @@ -939,7 +941,8 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, free_pages((unsigned long)ret, order); return NULL; } - *dma_handle = mapping; + + *dma_handle = mapping | ((u64)ret & (tcesize - 1)); return ret; } @@ -950,7 +953,7 @@ void iommu_free_coherent(struct iommu_table *tbl, size_t size, unsigned int nio_pages; size = PAGE_ALIGN(size); - nio_pages = size >> tbl->it_page_shift; + nio_pages = IOMMU_PAGE_ALIGN(size, tbl) >> tbl->it_page_shift; iommu_free(tbl, dma_handle, nio_pages); size = PAGE_ALIGN(size); free_pages((unsigned long)vaddr, get_order(size)); @@ -1168,23 +1171,6 @@ int iommu_add_device(struct iommu_table_group *table_group, struct device *dev) } EXPORT_SYMBOL_GPL(iommu_add_device); -void iommu_del_device(struct device *dev) -{ - /* - * Some devices might not have IOMMU table and group - * and we needn't detach them from the associated - * IOMMU groups - */ - if (!device_iommu_mapped(dev)) { - pr_debug("iommu_tce: skipping device %s with no tbl\n", - dev_name(dev)); - return; - } - - iommu_group_remove_device(dev); -} -EXPORT_SYMBOL_GPL(iommu_del_device); - /* * A simple iommu_table_group_ops which only allows reusing the existing * iommu_table. This handles VFIO for POWER7 or the nested KVM. diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c index 85bdd7d3652f..48e0eaf1ad61 100644 --- a/arch/powerpc/kernel/isa-bridge.c +++ b/arch/powerpc/kernel/isa-bridge.c @@ -93,11 +93,12 @@ static int process_ISA_OF_ranges(struct device_node *isa_node, } inval_range: - if (!phb_io_base_phys) { + if (phb_io_base_phys) { pr_err("no ISA IO ranges or unexpected isa range, mapping 64k\n"); remap_isa_base(phb_io_base_phys, 0x10000); + return 0; } - return 0; + return -EINVAL; } diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index 26245aaf12b8..2297aa764ecd 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -1040,8 +1040,8 @@ void radix__ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep, pte_t entry, unsigned long address, int psize) { struct mm_struct *mm = vma->vm_mm; - unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_RW | _PAGE_EXEC); + unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_SOFT_DIRTY | + _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); unsigned long change = pte_val(entry) ^ pte_val(*ptep); /* diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index e93aefcfb83f..37043dfc1add 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -101,6 +101,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) bpf_hdr = jit_data->header; proglen = jit_data->proglen; extra_pass = true; + /* During extra pass, ensure index is reset before repopulating extable entries */ + cgctx.exentry_idx = 0; goto skip_init_ctx; } diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 0d9b7609c7d5..3e2e252016f7 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -265,6 +265,7 @@ config CPM2 config FSL_ULI1575 bool "ULI1575 PCIe south bridge support" depends on FSL_SOC_BOOKE || PPC_86xx + depends on PCI select FSL_PCI select GENERIC_ISA_DMA help diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 233a50e65fce..7725492097b6 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -865,28 +865,3 @@ void __init pnv_pci_init(void) /* Configure IOMMU DMA hooks */ set_pci_dma_ops(&dma_iommu_ops); } - -static int pnv_tce_iommu_bus_notifier(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - - switch (action) { - case BUS_NOTIFY_DEL_DEVICE: - iommu_del_device(dev); - return 0; - default: - return 0; - } -} - -static struct notifier_block pnv_tce_iommu_bus_nb = { - .notifier_call = pnv_tce_iommu_bus_notifier, -}; - -static int __init pnv_tce_iommu_bus_notifier_init(void) -{ - bus_register_notifier(&pci_bus_type, &pnv_tce_iommu_bus_nb); - return 0; -} -machine_subsys_initcall_sync(powernv, pnv_tce_iommu_bus_notifier_init); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 7464fa6e4145..918f511837db 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -91,19 +91,24 @@ static struct iommu_table_group *iommu_pseries_alloc_group(int node) static void iommu_pseries_free_group(struct iommu_table_group *table_group, const char *node_name) { - struct iommu_table *tbl; - if (!table_group) return; - tbl = table_group->tables[0]; #ifdef CONFIG_IOMMU_API if (table_group->group) { iommu_group_put(table_group->group); BUG_ON(table_group->group); } #endif - iommu_tce_table_put(tbl); + + /* Default DMA window table is at index 0, while DDW at 1. SR-IOV + * adapters only have table on index 1. + */ + if (table_group->tables[0]) + iommu_tce_table_put(table_group->tables[0]); + + if (table_group->tables[1]) + iommu_tce_table_put(table_group->tables[1]); kfree(table_group); } @@ -1695,31 +1700,6 @@ static int __init disable_multitce(char *str) __setup("multitce=", disable_multitce); -static int tce_iommu_bus_notifier(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - - switch (action) { - case BUS_NOTIFY_DEL_DEVICE: - iommu_del_device(dev); - return 0; - default: - return 0; - } -} - -static struct notifier_block tce_iommu_bus_nb = { - .notifier_call = tce_iommu_bus_notifier, -}; - -static int __init tce_iommu_bus_notifier_init(void) -{ - bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); - return 0; -} -machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init); - #ifdef CONFIG_SPAPR_TCE_IOMMU struct iommu_group *pSeries_pci_device_group(struct pci_controller *hose, struct pci_dev *pdev) diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 922e8e0e2c09..1bb1e5cae602 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -109,6 +109,12 @@ }; /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC2", "PC3", "PC4", "PC5"; + function = "spi0"; + }; + + /omit-if-no-ref/ uart1_pg6_pins: uart1-pg6-pins { pins = "PG6", "PG7"; function = "uart1"; @@ -447,6 +453,37 @@ #size-cells = <0>; }; + spi0: spi@4025000 { + compatible = "allwinner,sun20i-d1-spi", + "allwinner,sun50i-r329-spi"; + reg = <0x04025000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@4026000 { + compatible = "allwinner,sun20i-d1-spi-dbi", + "allwinner,sun50i-r329-spi-dbi", + "allwinner,sun50i-r329-spi"; + reg = <0x04026000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(16) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + usb_otg: usb@4100000 { compatible = "allwinner,sun20i-d1-musb", "allwinner,sun8i-a33-musb"; diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile index 5d7cb991f2b8..7b593d44c712 100644 --- a/arch/riscv/kernel/pi/Makefile +++ b/arch/riscv/kernel/pi/Makefile @@ -22,7 +22,7 @@ KCOV_INSTRUMENT := n $(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \ --remove-section=.note.gnu.property \ - --prefix-alloc-sections=.init + --prefix-alloc-sections=.init.pi $(obj)/%.pi.o: $(obj)/%.o FORCE $(call if_changed,objcopy) diff --git a/arch/riscv/kernel/probes/Makefile b/arch/riscv/kernel/probes/Makefile index c40139e9ca47..8265ff497977 100644 --- a/arch/riscv/kernel/probes/Makefile +++ b/arch/riscv/kernel/probes/Makefile @@ -4,3 +4,5 @@ obj-$(CONFIG_RETHOOK) += rethook.o rethook_trampoline.o obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o simulate-insn.o CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_rethook.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_rethook_trampoline.o = $(CC_FLAGS_FTRACE) diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S index f03b5697f8e0..e5f9f4677bbf 100644 --- a/arch/riscv/kernel/vmlinux.lds.S +++ b/arch/riscv/kernel/vmlinux.lds.S @@ -84,11 +84,8 @@ SECTIONS __init_data_begin = .; INIT_DATA_SECTION(16) - /* Those sections result from the compilation of kernel/pi/string.c */ - .init.pidata : { - *(.init.srodata.cst8*) - *(.init__bug_table*) - *(.init.sdata*) + .init.pi : { + *(.init.pi*) } .init.bss : { diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index db20c1589a98..6dab9c1be508 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -469,19 +469,11 @@ config SCHED_SMT config SCHED_MC def_bool n -config SCHED_BOOK - def_bool n - -config SCHED_DRAWER - def_bool n - config SCHED_TOPOLOGY def_bool y prompt "Topology scheduler support" select SCHED_SMT select SCHED_MC - select SCHED_BOOK - select SCHED_DRAWER help Topology scheduler support improves the CPU scheduler's decision making when dealing with machines that have multi-threading, @@ -716,7 +708,6 @@ config EADM_SCH config VFIO_CCW def_tristate n prompt "Support for VFIO-CCW subchannels" - depends on S390_CCW_IOMMU depends on VFIO select VFIO_MDEV help @@ -728,7 +719,7 @@ config VFIO_CCW config VFIO_AP def_tristate n prompt "VFIO support for AP devices" - depends on S390_AP_IOMMU && KVM + depends on KVM depends on VFIO depends on ZCRYPT select VFIO_MDEV diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 4ccf66d29fc2..be3bf03bf361 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -591,8 +591,6 @@ CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y CONFIG_VHOST_NET=m CONFIG_VHOST_VSOCK=m -CONFIG_S390_CCW_IOMMU=y -CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -703,6 +701,7 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor" +CONFIG_INIT_STACK_NONE=y CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_PCRYPT=m diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index 693297a2e897..769c7eed8b6a 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -580,8 +580,6 @@ CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y CONFIG_VHOST_NET=m CONFIG_VHOST_VSOCK=m -CONFIG_S390_CCW_IOMMU=y -CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -686,6 +684,7 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor" +CONFIG_INIT_STACK_NONE=y CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index 33a232bb68af..6f68b39817ef 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -67,6 +67,7 @@ CONFIG_ZFCP=y # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_LSM="yama,loadpin,safesetid,integrity" +CONFIG_INIT_STACK_NONE=y # CONFIG_ZLIB_DFLTCC is not set CONFIG_XZ_DEC_MICROLZMA=y CONFIG_PRINTK_TIME=y diff --git a/arch/s390/crypto/chacha-glue.c b/arch/s390/crypto/chacha-glue.c index 7752bd314558..5fae187f947a 100644 --- a/arch/s390/crypto/chacha-glue.c +++ b/arch/s390/crypto/chacha-glue.c @@ -82,7 +82,7 @@ void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, * it cannot handle a block of data or less, but otherwise * it can handle data of arbitrary size */ - if (bytes <= CHACHA_BLOCK_SIZE || nrounds != 20) + if (bytes <= CHACHA_BLOCK_SIZE || nrounds != 20 || !MACHINE_HAS_VX) chacha_crypt_generic(state, dst, src, bytes, nrounds); else chacha20_crypt_s390(state, dst, src, bytes, diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index a386070f1d56..3cb9d813f022 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -112,7 +112,7 @@ struct compat_statfs64 { u32 f_namelen; u32 f_frsize; u32 f_flags; - u32 f_spare[4]; + u32 f_spare[5]; }; /* diff --git a/arch/s390/include/uapi/asm/statfs.h b/arch/s390/include/uapi/asm/statfs.h index 72604f7792c3..f85b50723dd3 100644 --- a/arch/s390/include/uapi/asm/statfs.h +++ b/arch/s390/include/uapi/asm/statfs.h @@ -30,7 +30,7 @@ struct statfs { unsigned int f_namelen; unsigned int f_frsize; unsigned int f_flags; - unsigned int f_spare[4]; + unsigned int f_spare[5]; }; struct statfs64 { @@ -45,7 +45,7 @@ struct statfs64 { unsigned int f_namelen; unsigned int f_frsize; unsigned int f_flags; - unsigned int f_spare[4]; + unsigned int f_spare[5]; }; #endif diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 8983837b3565..6b2a051e1f8a 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -10,6 +10,7 @@ CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE) # Do not trace early setup code CFLAGS_REMOVE_early.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_rethook.o = $(CC_FLAGS_FTRACE) endif diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 43de939b7af1..f44f70de9661 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1935,14 +1935,13 @@ static struct shutdown_action __refdata dump_action = { static void dump_reipl_run(struct shutdown_trigger *trigger) { - unsigned long ipib = (unsigned long) reipl_block_actual; struct lowcore *abs_lc; unsigned int csum; csum = (__force unsigned int) csum_partial(reipl_block_actual, reipl_block_actual->hdr.len, 0); abs_lc = get_abs_lowcore(); - abs_lc->ipib = ipib; + abs_lc->ipib = __pa(reipl_block_actual); abs_lc->ipib_checksum = csum; put_abs_lowcore(abs_lc); dump_run(trigger); diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 9fd19530c9a5..68adf1de8888 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -95,7 +95,7 @@ out: static void cpu_thread_map(cpumask_t *dst, unsigned int cpu) { static cpumask_t mask; - int i; + unsigned int max_cpu; cpumask_clear(&mask); if (!cpumask_test_cpu(cpu, &cpu_setup_mask)) @@ -104,9 +104,10 @@ static void cpu_thread_map(cpumask_t *dst, unsigned int cpu) if (topology_mode != TOPOLOGY_MODE_HW) goto out; cpu -= cpu % (smp_cpu_mtid + 1); - for (i = 0; i <= smp_cpu_mtid; i++) { - if (cpumask_test_cpu(cpu + i, &cpu_setup_mask)) - cpumask_set_cpu(cpu + i, &mask); + max_cpu = min(cpu + smp_cpu_mtid, nr_cpu_ids - 1); + for (; cpu <= max_cpu; cpu++) { + if (cpumask_test_cpu(cpu, &cpu_setup_mask)) + cpumask_set_cpu(cpu, &mask); } out: cpumask_copy(dst, &mask); @@ -123,25 +124,26 @@ static void add_cpus_to_mask(struct topology_core *tl_core, unsigned int core; for_each_set_bit(core, &tl_core->mask, TOPOLOGY_CORE_BITS) { - unsigned int rcore; - int lcpu, i; + unsigned int max_cpu, rcore; + int cpu; rcore = TOPOLOGY_CORE_BITS - 1 - core + tl_core->origin; - lcpu = smp_find_processor_id(rcore << smp_cpu_mt_shift); - if (lcpu < 0) + cpu = smp_find_processor_id(rcore << smp_cpu_mt_shift); + if (cpu < 0) continue; - for (i = 0; i <= smp_cpu_mtid; i++) { - topo = &cpu_topology[lcpu + i]; + max_cpu = min(cpu + smp_cpu_mtid, nr_cpu_ids - 1); + for (; cpu <= max_cpu; cpu++) { + topo = &cpu_topology[cpu]; topo->drawer_id = drawer->id; topo->book_id = book->id; topo->socket_id = socket->id; topo->core_id = rcore; - topo->thread_id = lcpu + i; + topo->thread_id = cpu; topo->dedicated = tl_core->d; - cpumask_set_cpu(lcpu + i, &drawer->mask); - cpumask_set_cpu(lcpu + i, &book->mask); - cpumask_set_cpu(lcpu + i, &socket->mask); - smp_cpu_set_polarization(lcpu + i, tl_core->pp); + cpumask_set_cpu(cpu, &drawer->mask); + cpumask_set_cpu(cpu, &book->mask); + cpumask_set_cpu(cpu, &socket->mask); + smp_cpu_set_polarization(cpu, tl_core->pp); } } } diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index dee6f66353b3..a461a950f051 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -16,7 +16,8 @@ mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o ubd-objs := ubd_kern.o ubd_user.o port-objs := port_kern.o port_user.o -harddog-objs := harddog_kern.o harddog_user.o +harddog-objs := harddog_kern.o +harddog-builtin-$(CONFIG_UML_WATCHDOG) := harddog_user.o harddog_user_exp.o rtc-objs := rtc_kern.o rtc_user.o LDFLAGS_pcap.o = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libpcap.a) @@ -60,6 +61,7 @@ obj-$(CONFIG_PTY_CHAN) += pty.o obj-$(CONFIG_TTY_CHAN) += tty.o obj-$(CONFIG_XTERM_CHAN) += xterm.o xterm_kern.o obj-$(CONFIG_UML_WATCHDOG) += harddog.o +obj-y += $(harddog-builtin-y) $(harddog-builtin-m) obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o obj-$(CONFIG_UML_RANDOM) += random.o obj-$(CONFIG_VIRTIO_UML) += virtio_uml.o diff --git a/arch/um/drivers/harddog.h b/arch/um/drivers/harddog.h new file mode 100644 index 000000000000..6d9ea60e7133 --- /dev/null +++ b/arch/um/drivers/harddog.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef UM_WATCHDOG_H +#define UM_WATCHDOG_H + +int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock); +void stop_watchdog(int in_fd, int out_fd); +int ping_watchdog(int fd); + +#endif /* UM_WATCHDOG_H */ diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index e6d4f43deba8..60d1c6cab8a9 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -47,6 +47,7 @@ #include <linux/spinlock.h> #include <linux/uaccess.h> #include "mconsole.h" +#include "harddog.h" MODULE_LICENSE("GPL"); @@ -60,8 +61,6 @@ static int harddog_out_fd = -1; * Allow only one person to hold it open */ -extern int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock); - static int harddog_open(struct inode *inode, struct file *file) { int err = -EBUSY; @@ -92,8 +91,6 @@ err: return err; } -extern void stop_watchdog(int in_fd, int out_fd); - static int harddog_release(struct inode *inode, struct file *file) { /* @@ -112,8 +109,6 @@ static int harddog_release(struct inode *inode, struct file *file) return 0; } -extern int ping_watchdog(int fd); - static ssize_t harddog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index 070468d22e39..9ed89304975e 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -7,6 +7,7 @@ #include <unistd.h> #include <errno.h> #include <os.h> +#include "harddog.h" struct dog_data { int stdin_fd; diff --git a/arch/um/drivers/harddog_user_exp.c b/arch/um/drivers/harddog_user_exp.c new file mode 100644 index 000000000000..c74d4b815d14 --- /dev/null +++ b/arch/um/drivers/harddog_user_exp.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/export.h> +#include "harddog.h" + +#if IS_MODULE(CONFIG_UML_WATCHDOG) +EXPORT_SYMBOL(start_watchdog); +EXPORT_SYMBOL(stop_watchdog); +EXPORT_SYMBOL(ping_watchdog); +#endif diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index d096b04bf80e..9d248703cbdd 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -1703,10 +1703,8 @@ int x86_pmu_handle_irq(struct pt_regs *regs) perf_sample_data_init(&data, 0, event->hw.last_period); - if (has_branch_stack(event)) { - data.br_stack = &cpuc->lbr_stack; - data.sample_flags |= PERF_SAMPLE_BRANCH_STACK; - } + if (has_branch_stack(event)) + perf_sample_save_brstack(&data, event, &cpuc->lbr_stack); if (perf_event_overflow(event, &data, regs)) x86_pmu_stop(event, 0); diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index a2e566e53076..df88576d6b2a 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -1229,12 +1229,14 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc, struct perf_event *event, bool add) { struct pmu *pmu = event->pmu; + /* * Make sure we get updated with the first PEBS * event. It will trigger also during removal, but * that does not hurt: */ - bool update = cpuc->n_pebs == 1; + if (cpuc->n_pebs == 1) + cpuc->pebs_data_cfg = PEBS_UPDATE_DS_SW; if (needed_cb != pebs_needs_sched_cb(cpuc)) { if (!needed_cb) @@ -1242,7 +1244,7 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc, else perf_sched_cb_dec(pmu); - update = true; + cpuc->pebs_data_cfg |= PEBS_UPDATE_DS_SW; } /* @@ -1252,24 +1254,13 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc, if (x86_pmu.intel_cap.pebs_baseline && add) { u64 pebs_data_cfg; - /* Clear pebs_data_cfg and pebs_record_size for first PEBS. */ - if (cpuc->n_pebs == 1) { - cpuc->pebs_data_cfg = 0; - cpuc->pebs_record_size = sizeof(struct pebs_basic); - } - pebs_data_cfg = pebs_update_adaptive_cfg(event); - - /* Update pebs_record_size if new event requires more data. */ - if (pebs_data_cfg & ~cpuc->pebs_data_cfg) { - cpuc->pebs_data_cfg |= pebs_data_cfg; - adaptive_pebs_record_size_update(); - update = true; - } + /* + * Be sure to update the thresholds when we change the record. + */ + if (pebs_data_cfg & ~cpuc->pebs_data_cfg) + cpuc->pebs_data_cfg |= pebs_data_cfg | PEBS_UPDATE_DS_SW; } - - if (update) - pebs_update_threshold(cpuc); } void intel_pmu_pebs_add(struct perf_event *event) @@ -1326,9 +1317,17 @@ static void intel_pmu_pebs_via_pt_enable(struct perf_event *event) wrmsrl(base + idx, value); } +static inline void intel_pmu_drain_large_pebs(struct cpu_hw_events *cpuc) +{ + if (cpuc->n_pebs == cpuc->n_large_pebs && + cpuc->n_pebs != cpuc->n_pebs_via_pt) + intel_pmu_drain_pebs_buffer(); +} + void intel_pmu_pebs_enable(struct perf_event *event) { struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + u64 pebs_data_cfg = cpuc->pebs_data_cfg & ~PEBS_UPDATE_DS_SW; struct hw_perf_event *hwc = &event->hw; struct debug_store *ds = cpuc->ds; unsigned int idx = hwc->idx; @@ -1344,11 +1343,22 @@ void intel_pmu_pebs_enable(struct perf_event *event) if (x86_pmu.intel_cap.pebs_baseline) { hwc->config |= ICL_EVENTSEL_ADAPTIVE; - if (cpuc->pebs_data_cfg != cpuc->active_pebs_data_cfg) { - wrmsrl(MSR_PEBS_DATA_CFG, cpuc->pebs_data_cfg); - cpuc->active_pebs_data_cfg = cpuc->pebs_data_cfg; + if (pebs_data_cfg != cpuc->active_pebs_data_cfg) { + /* + * drain_pebs() assumes uniform record size; + * hence we need to drain when changing said + * size. + */ + intel_pmu_drain_large_pebs(cpuc); + adaptive_pebs_record_size_update(); + wrmsrl(MSR_PEBS_DATA_CFG, pebs_data_cfg); + cpuc->active_pebs_data_cfg = pebs_data_cfg; } } + if (cpuc->pebs_data_cfg & PEBS_UPDATE_DS_SW) { + cpuc->pebs_data_cfg = pebs_data_cfg; + pebs_update_threshold(cpuc); + } if (idx >= INTEL_PMC_IDX_FIXED) { if (x86_pmu.intel_cap.pebs_format < 5) @@ -1391,9 +1401,7 @@ void intel_pmu_pebs_disable(struct perf_event *event) struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; - if (cpuc->n_pebs == cpuc->n_large_pebs && - cpuc->n_pebs != cpuc->n_pebs_via_pt) - intel_pmu_drain_pebs_buffer(); + intel_pmu_drain_large_pebs(cpuc); cpuc->pebs_enabled &= ~(1ULL << hwc->idx); diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 8fc15ed5e60b..abf09882f58b 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -121,6 +121,9 @@ #define PEBS_DATACFG_LBRS BIT_ULL(3) #define PEBS_DATACFG_LBR_SHIFT 24 +/* Steal the highest bit of pebs_data_cfg for SW usage */ +#define PEBS_UPDATE_DS_SW BIT_ULL(63) + /* * Intel "Architectural Performance Monitoring" CPUID * detection/enumeration details: diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h index 498dc600bd5c..0d02c4aafa6f 100644 --- a/arch/x86/include/asm/vmx.h +++ b/arch/x86/include/asm/vmx.h @@ -13,7 +13,9 @@ #include <linux/bitops.h> +#include <linux/bug.h> #include <linux/types.h> + #include <uapi/asm/vmx.h> #include <asm/vmxfeatures.h> diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index dd61752f4c96..4070a01c11b7 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -17,6 +17,7 @@ CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_early_printk.o = -pg CFLAGS_REMOVE_head64.o = -pg CFLAGS_REMOVE_sev.o = -pg +CFLAGS_REMOVE_rethook.o = -pg endif KASAN_SANITIZE_head$(BITS).o := n diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 4266b64631a4..7e331e8f3692 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -36,6 +36,7 @@ #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F4 0x166e #define PCI_DEVICE_ID_AMD_19H_M60H_DF_F4 0x14e4 #define PCI_DEVICE_ID_AMD_19H_M70H_DF_F4 0x14f4 +#define PCI_DEVICE_ID_AMD_19H_M78H_DF_F4 0x12fc /* Protect the PCI config register pairs used for SMN. */ static DEFINE_MUTEX(smn_mutex); @@ -79,6 +80,7 @@ static const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M78H_DF_F3) }, {} }; diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 123bf8b97a4b..0c9660a07b23 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -253,7 +253,6 @@ static void __kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu, struct kvm_cpuid_e int nent) { struct kvm_cpuid_entry2 *best; - u64 guest_supported_xcr0 = cpuid_get_supported_xcr0(entries, nent); best = cpuid_entry2_find(entries, nent, 1, KVM_CPUID_INDEX_NOT_SIGNIFICANT); if (best) { @@ -292,21 +291,6 @@ static void __kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu, struct kvm_cpuid_e vcpu->arch.ia32_misc_enable_msr & MSR_IA32_MISC_ENABLE_MWAIT); } - - /* - * Bits 127:0 of the allowed SECS.ATTRIBUTES (CPUID.0x12.0x1) enumerate - * the supported XSAVE Feature Request Mask (XFRM), i.e. the enclave's - * requested XCR0 value. The enclave's XFRM must be a subset of XCRO - * at the time of EENTER, thus adjust the allowed XFRM by the guest's - * supported XCR0. Similar to XCR0 handling, FP and SSE are forced to - * '1' even on CPUs that don't support XSAVE. - */ - best = cpuid_entry2_find(entries, nent, 0x12, 0x1); - if (best) { - best->ecx &= guest_supported_xcr0 & 0xffffffff; - best->edx &= guest_supported_xcr0 >> 32; - best->ecx |= XFEATURE_MASK_FPSSE; - } } void kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu) diff --git a/arch/x86/kvm/vmx/sgx.c b/arch/x86/kvm/vmx/sgx.c index 0574030b071f..2261b684a7d4 100644 --- a/arch/x86/kvm/vmx/sgx.c +++ b/arch/x86/kvm/vmx/sgx.c @@ -170,12 +170,19 @@ static int __handle_encls_ecreate(struct kvm_vcpu *vcpu, return 1; } - /* Enforce CPUID restrictions on MISCSELECT, ATTRIBUTES and XFRM. */ + /* + * Enforce CPUID restrictions on MISCSELECT, ATTRIBUTES and XFRM. Note + * that the allowed XFRM (XFeature Request Mask) isn't strictly bound + * by the supported XCR0. FP+SSE *must* be set in XFRM, even if XSAVE + * is unsupported, i.e. even if XCR0 itself is completely unsupported. + */ if ((u32)miscselect & ~sgx_12_0->ebx || (u32)attributes & ~sgx_12_1->eax || (u32)(attributes >> 32) & ~sgx_12_1->ebx || (u32)xfrm & ~sgx_12_1->ecx || - (u32)(xfrm >> 32) & ~sgx_12_1->edx) { + (u32)(xfrm >> 32) & ~sgx_12_1->edx || + xfrm & ~(vcpu->arch.guest_supported_xcr0 | XFEATURE_MASK_FPSSE) || + (xfrm & XFEATURE_MASK_FPSSE) != XFEATURE_MASK_FPSSE) { kvm_inject_gp(vcpu, 0); return 1; } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index ceb7c5e9cf9e..c0778ca39650 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1446,7 +1446,7 @@ static const u32 msrs_to_save_base[] = { #endif MSR_IA32_TSC, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA, MSR_IA32_FEAT_CTL, MSR_IA32_BNDCFGS, MSR_TSC_AUX, - MSR_IA32_SPEC_CTRL, + MSR_IA32_SPEC_CTRL, MSR_IA32_TSX_CTRL, MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_STATUS, MSR_IA32_RTIT_CR3_MATCH, MSR_IA32_RTIT_OUTPUT_BASE, MSR_IA32_RTIT_OUTPUT_MASK, MSR_IA32_RTIT_ADDR0_A, MSR_IA32_RTIT_ADDR0_B, @@ -7155,6 +7155,10 @@ static void kvm_probe_msr_to_save(u32 msr_index) if (!kvm_cpu_cap_has(X86_FEATURE_XFD)) return; break; + case MSR_IA32_TSX_CTRL: + if (!(kvm_get_arch_capabilities() & ARCH_CAP_TSX_CTRL_MSR)) + return; + break; default: break; } diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S index 27ef53fab6bd..b3b1e376dce8 100644 --- a/arch/x86/lib/retpoline.S +++ b/arch/x86/lib/retpoline.S @@ -144,8 +144,8 @@ SYM_CODE_END(__x86_indirect_jump_thunk_array) */ .align 64 .skip 63, 0xcc -SYM_FUNC_START_NOALIGN(zen_untrain_ret); - +SYM_START(zen_untrain_ret, SYM_L_GLOBAL, SYM_A_NONE) + ANNOTATE_NOENDBR /* * As executed from zen_untrain_ret, this is: * |