diff options
Diffstat (limited to 'arch')
25 files changed, 45 insertions, 44 deletions
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile index 5648748c285f..5a8550124b73 100644 --- a/arch/arc/boot/Makefile +++ b/arch/arc/boot/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -# uImage build relies on mkimage being availble on your host for ARC target +# uImage build relies on mkimage being available on your host for ARC target # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage -# and make sure it's reacable from your PATH +# and make sure it's reachable from your PATH OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index 3434c8131ecd..c0a812674ce9 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -119,9 +119,9 @@ /* * The DW APB ICTL intc on MB is connected to CPU intc via a * DT "invisible" DW APB GPIO block, configured to simply pass thru - * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c) + * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c) * - * So here we mimic a direct connection betwen them, ignoring the + * So here we mimic a direct connection between them, ignoring the * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core) * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO) * diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi index 90a412026e64..0e0e2d337bf8 100644 --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi @@ -113,7 +113,7 @@ /* * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * - * This node is intentionally put outside of MB above becase + * This node is intentionally put outside of MB above because * it maps areas outside of MB's 0xez-0xfz. */ uio_ev: uio@d0000000 { diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h index 202c78e56704..f496dbc4640b 100644 --- a/arch/arc/include/asm/dsp.h +++ b/arch/arc/include/asm/dsp.h @@ -12,7 +12,7 @@ /* * DSP-related saved registers - need to be saved only when you are * scheduled out. - * structure fields name must correspond to aux register defenitions for + * structure fields name must correspond to aux register definitions for * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros */ struct dsp_callee_regs { diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index 92c3e9f13252..00946fe04c9b 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -7,7 +7,7 @@ * Stack switching code can no longer reliably rely on the fact that * if we are NOT in user mode, stack is switched to kernel mode. * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed - * it's prologue including stack switching from user mode + * its prologue including stack switching from user mode * * Vineetg: Aug 28th 2008: Bug #94984 * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap @@ -143,7 +143,7 @@ * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode) * 3. But before it could switch SP from USER to KERNEL stack * a L2 IRQ "Interrupts" L1 - * Thay way although L2 IRQ happened in Kernel mode, stack is still + * That way although L2 IRQ happened in Kernel mode, stack is still * not switched. * To handle this, we may need to switch stack even if in kernel mode * provided SP has values in range of USER mode stack ( < 0x7000_0000 ) @@ -173,7 +173,7 @@ GET_CURR_TASK_ON_CPU r9 - /* With current tsk in r9, get it's kernel mode stack base */ + /* With current tsk in r9, get its kernel mode stack base */ GET_TSK_STACK_BASE r9, r9 /* save U mode SP @ pt_regs->sp */ @@ -282,7 +282,7 @@ * NOTE: * * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered + * for memory load operations. If used in that way interrupts are deferred * by hardware and that is not good. *-------------------------------------------------------------*/ .macro EXCEPTION_EPILOGUE @@ -350,7 +350,7 @@ * NOTE: * * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered + * for memory load operations. If used in that way interrupts are deferred * by hardware and that is not good. *-------------------------------------------------------------*/ .macro INTERRUPT_EPILOGUE LVL diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index cf1ba376e992..38c35722cebf 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARC_ENTRY_H #define __ASM_ARC_ENTRY_H -#include <asm/unistd.h> /* For NR_syscalls defination */ +#include <asm/unistd.h> /* For NR_syscalls definition */ #include <asm/arcregs.h> #include <asm/ptrace.h> #include <asm/processor.h> /* For VMALLOC_START */ @@ -56,7 +56,7 @@ .endm /*------------------------------------------------------------- - * given a tsk struct, get to the base of it's kernel mode stack + * given a tsk struct, get to the base of its kernel mode stack * tsk->thread_info is really a PAGE, whose bottom hoists stack * which grows upwards towards thread_info *------------------------------------------------------------*/ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index c574712ad865..9cd79263acba 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -10,7 +10,7 @@ * ARCv2 can support 240 interrupts in the core interrupts controllers and * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most * configurations of boards. - * This doesnt affect ARCompact, but we change it to same value + * This doesn't affect ARCompact, but we change it to same value */ #define NR_IRQS 512 diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h index 0d63e568d64c..936a2f21f315 100644 --- a/arch/arc/include/asm/irqflags-compact.h +++ b/arch/arc/include/asm/irqflags-compact.h @@ -46,7 +46,7 @@ * IRQ Control Macros * * All of them have "memory" clobber (compiler barrier) which is needed to - * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available) + * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available) * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register) * * Noted at the time of Abilis Timer List corruption diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index dda471f5f05b..9963bb1a5733 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -165,7 +165,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * for retiring-mm. However destroy_context( ) still needs to do that because * between mm_release( ) = >deactive_mm( ) and * mmput => .. => __mmdrop( ) => destroy_context( ) - * there is a good chance that task gets sched-out/in, making it's ASID valid + * there is a good chance that task gets sched-out/in, making its ASID valid * again (this teased me for a whole day). */ diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h index f3eea3f30b2e..8ebec1b21d24 100644 --- a/arch/arc/include/asm/pgtable-bits-arcv2.h +++ b/arch/arc/include/asm/pgtable-bits-arcv2.h @@ -66,7 +66,7 @@ * Other rules which cause the divergence from 1:1 mapping * * 1. Although ARC700 can do exclusive execute/write protection (meaning R - * can be tracked independet of X/W unlike some other CPUs), still to + * can be tracked independently of X/W unlike some other CPUs), still to * keep things consistent with other archs: * -Write implies Read: W => R * -Execute implies Read: X => R diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h index 8b0251464ffd..719112af0f41 100644 --- a/arch/arc/include/asm/shmparam.h +++ b/arch/arc/include/asm/shmparam.h @@ -6,7 +6,7 @@ #ifndef __ARC_ASM_SHMPARAM_H #define __ARC_ASM_SHMPARAM_H -/* Handle upto 2 cache bins */ +/* Handle up to 2 cache bins */ #define SHMLBA (2 * PAGE_SIZE) /* Enforce SHMLBA in shmat */ diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index e0913f52c2cd..990f834909f0 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -77,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void) /* * ARC700 doesn't support atomic Read-Modify-Write ops. - * Originally Interrupts had to be disabled around code to gaurantee atomicity. + * Originally Interrupts had to be disabled around code to guarantee atomicity. * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops * based on retry-if-irq-in-atomic (with hardware assist). * However despite these, we provide the IRQ disabling variant @@ -86,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void) * support needed. * * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be - * gaurantted by the platform (not something which core handles). + * guaranteed by the platform (not something which core handles). * Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ * disabling for atomicity. * diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 4c530cf131f3..12daaf3a61ea 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -38,7 +38,7 @@ struct thread_info { unsigned long flags; /* low level flags */ unsigned long ksp; /* kernel mode stack top in __switch_to */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ + int preempt_count; /* 0 => preemptible, <0 => BUG */ int cpu; /* current CPU */ unsigned long thr_ptr; /* TLS ptr */ struct task_struct *task; /* main task structure */ diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h index 02109cd48ee1..8d1f1ef44ba7 100644 --- a/arch/arc/include/uapi/asm/swab.h +++ b/arch/arc/include/uapi/asm/swab.h @@ -62,7 +62,7 @@ * 8051fdc4: st r2,[r1,20] ; Mem op : save result back to mem * * Joern suggested a better "C" algorithm which is great since - * (1) It is portable to any architecure + * (1) It is portable to any architecture * (2) At the same time it takes advantage of ARC ISA (rotate intrns) */ diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index 2e49c81c8086..e238b5fd3c8c 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -5,7 +5,7 @@ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) */ -#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */ +#include <linux/linkage.h> /* ARC_{ENTRY,EXIT} */ #include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */ #include <asm/errno.h> #include <asm/arcregs.h> @@ -31,7 +31,7 @@ VECTOR res_service ; Reset Vector VECTOR mem_service ; Mem exception VECTOR instr_service ; Instrn Error VECTOR EV_MachineCheck ; Fatal Machine check -VECTOR EV_TLBMissI ; Intruction TLB miss +VECTOR EV_TLBMissI ; Instruction TLB miss VECTOR EV_TLBMissD ; Data TLB miss VECTOR EV_TLBProtV ; Protection Violation VECTOR EV_PrivilegeV ; Privilege Violation @@ -76,11 +76,11 @@ ENTRY(handle_interrupt) # query in hard ISR path would return false (since .IE is set) which would # trips genirq interrupt handling asserts. # - # So do a "soft" disable of interrutps here. + # So do a "soft" disable of interrupts here. # # Note this disable is only for consistent book-keeping as further interrupts # will be disabled anyways even w/o this. Hardware tracks active interrupts - # seperately in AUX_IRQ_ACT.active and will not take new interrupts + # separately in AUX_IRQ_ACT.active and will not take new interrupts # unless this one returns (or higher prio becomes pending in 2-prio scheme) IRQ_DISABLE diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 089f6680518f..3c7e74aba679 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -95,7 +95,7 @@ ENTRY(EV_MachineCheck) lr r0, [efa] mov r1, sp - ; MC excpetions disable MMU + ; MC exceptions disable MMU ARC_MMU_REENABLE r3 lsr r3, r10, 8 @@ -209,7 +209,7 @@ trap_with_param: ; --------------------------------------------- ; syscall TRAP -; ABI: (r0-r7) upto 8 args, (r8) syscall number +; ABI: (r0-r7) up to 8 args, (r8) syscall number ; --------------------------------------------- ENTRY(EV_Trap) diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 9152782444b5..8d541f53fae3 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -165,7 +165,7 @@ ENTRY(first_lines_of_secondary) ; setup stack (fp, sp) mov fp, 0 - ; set it's stack base to tsk->thread_info bottom + ; set its stack base to tsk->thread_info bottom GET_TSK_STACK_BASE r0, sp j start_kernel_secondary diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 678898757e47..f324f0e3341a 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -56,7 +56,7 @@ void arc_init_IRQ(void) WRITE_AUX(AUX_IRQ_CTRL, ictrl); /* - * ARCv2 core intc provides multiple interrupt priorities (upto 16). + * ARCv2 core intc provides multiple interrupt priorities (up to 16). * Typical builds though have only two levels (0-high, 1-low) * Linux by default uses lower prio 1 for most irqs, reserving 0 for * NMI style interrupts in future (say perf) diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index adff957962da..6e5a651cd75c 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -38,7 +38,7 @@ * (based on a specific RTL build) * Below is the static map between perf generic/arc specific event_id and * h/w condition names. - * At the time of probe, we loop thru each index and find it's name to + * At the time of probe, we loop thru each index and find its name to * complete the mapping of perf event_id to h/w index as latter is needed * to program the counter really */ diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index d08a5092c2b4..7b6a9beba9db 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -390,7 +390,7 @@ static void arc_chk_core_config(struct cpuinfo_arc *info) #ifdef CONFIG_ARC_HAS_DCCM /* * DCCM can be arbit placed in hardware. - * Make sure it's placement/sz matches what Linux is built with + * Make sure its placement/sz matches what Linux is built with */ if ((unsigned int)__arc_dccm_base != info->dccm.base) panic("Linux built with incorrect DCCM Base address\n"); diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 8f6f4a542964..fefa705a8638 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -8,15 +8,16 @@ * * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK) * -do_signal() supports TIF_RESTORE_SIGMASK - * -do_signal() no loner needs oldset, required by OLD sys_sigsuspend - * -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen + * -do_signal() no longer needs oldset, required by OLD sys_sigsuspend + * -sys_rt_sigsuspend() now comes from generic code, so discard arch + * implementation * -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed * -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves * the job to do_signal() * * vineetg: July 2009 * -Modified Code to support the uClibc provided userland sigreturn stub - * to avoid kernel synthesing it on user stack at runtime, costing TLB + * to avoid kernel synthesizing it on user stack at runtime, costing TLB * probes and Cache line flushes. * * vineetg: July 2009 diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 9b9570b79362..a19751e824fb 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -89,7 +89,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs, /* * Entry point for miscll errors such as Nested Exceptions - * -Duplicate TLB entry is handled seperately though + * -Duplicate TLB entry is handled separately though */ void do_machine_check_fault(unsigned long address, struct pt_regs *regs) { diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S index 549c3f407918..61a1b2b96e1d 100644 --- a/arch/arc/kernel/vmlinux.lds.S +++ b/arch/arc/kernel/vmlinux.lds.S @@ -41,8 +41,8 @@ SECTIONS #endif /* - * The reason for having a seperate subsection .init.ramfs is to - * prevent objump from including it in kernel dumps + * The reason for having a separate subsection .init.ramfs is to + * prevent objdump from including it in kernel dumps * * Reason for having .init.ramfs above .init is to make sure that the * binary blob is tucked away to one side, reducing the displacement diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index ad702b49aeb3..cae4a7aae0ed 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -212,7 +212,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long flags; /* If range @start to @end is more than 32 TLB entries deep, - * its better to move to a new ASID rather than searching for + * it's better to move to a new ASID rather than searching for * individual entries and then shooting them down * * The calc above is rough, doesn't account for unaligned parts, @@ -408,7 +408,7 @@ static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *p * -More importantly it makes this handler inconsistent with fast-path * TLB Refill handler which always deals with "current" * - * Lets see the use cases when current->mm != vma->mm and we land here + * Let's see the use cases when current->mm != vma->mm and we land here * 1. execve->copy_strings()->__get_user_pages->handle_mm_fault * Here VM wants to pre-install a TLB entry for user stack while * current->mm still points to pre-execve mm (hence the condition). diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index e054780a8fe0..dc65e87a531f 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -5,19 +5,19 @@ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * Vineetg: April 2011 : - * -MMU v1: moved out legacy code into a seperate file + * -MMU v1: moved out legacy code into a separate file * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore, * helps avoid a shift when preparing PD0 from PTE * * Vineetg: July 2009 - * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB - * entry, so that it doesn't knock out it's I-TLB entry + * -For MMU V2, we need not do heuristics at the time of committing a D-TLB + * entry, so that it doesn't knock out its I-TLB entry * -Some more fine tuning: * bmsk instead of add, asl.cc instead of branch, delay slot utilise etc * * Vineetg: July 2009 * -Practically rewrote the I/D TLB Miss handlers - * Now 40 and 135 instructions a peice as compared to 131 and 449 resp. + * Now 40 and 135 instructions apiece as compared to 131 and 449 resp. * Hence Leaner by 1.5 K * Used Conditional arithmetic to replace excessive branching * Also used short instructions wherever possible |