summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/utnonansi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/acpica/utnonansi.c')
-rw-r--r--drivers/acpi/acpica/utnonansi.c380
1 files changed, 380 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/utnonansi.c b/drivers/acpi/acpica/utnonansi.c
new file mode 100644
index 000000000000..1d5f6b17b766
--- /dev/null
+++ b/drivers/acpi/acpica/utnonansi.c
@@ -0,0 +1,380 @@
+/*******************************************************************************
+ *
+ * Module Name: utnonansi - Non-ansi C library functions
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utnonansi")
+
+/*
+ * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
+ * version of strtoul.
+ */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert a string to lowercase
+ *
+ ******************************************************************************/
+void acpi_ut_strlwr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, lowercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)tolower((int)*string);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strupr (strupr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert a string to uppercase
+ *
+ ******************************************************************************/
+
+void acpi_ut_strupr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, uppercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)toupper((int)*string);
+ }
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_stricmp (stricmp)
+ *
+ * PARAMETERS: string1 - first string to compare
+ * string2 - second string to compare
+ *
+ * RETURN: int that signifies string relationship. Zero means strings
+ * are equal.
+ *
+ * DESCRIPTION: Case-insensitive string compare. Implementation of the
+ * non-ANSI stricmp function.
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+ int c1;
+ int c2;
+
+ do {
+ c1 = tolower((int)*string1);
+ c2 = tolower((int)*string2);
+
+ string1++;
+ string2++;
+ }
+ while ((c1 == c2) && (c1));
+
+ return (c1 - c2);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul64
+ *
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * ACPI_ANY_BASE means 'in behalf of to_integer'
+ * ret_integer - Where the converted integer is returned
+ *
+ * RETURN: Status and Converted value
+ *
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ * 32-bit or 64-bit conversion, depending on the current mode
+ * of the interpreter.
+ *
+ * NOTE: Does not support Octal strings, not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
+{
+ u32 this_digit = 0;
+ u64 return_value = 0;
+ u64 quotient;
+ u64 dividend;
+ u32 to_integer_op = (base == ACPI_ANY_BASE);
+ u32 mode32 = (acpi_gbl_integer_byte_width == 4);
+ u8 valid_digits = 0;
+ u8 sign_of0x = 0;
+ u8 term = 0;
+
+ ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
+
+ switch (base) {
+ case ACPI_ANY_BASE:
+ case 16:
+
+ break;
+
+ default:
+
+ /* Invalid Base */
+
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ if (!string) {
+ goto error_exit;
+ }
+
+ /* Skip over any white space in the buffer */
+
+ while ((*string) && (isspace((int)*string) || *string == '\t')) {
+ string++;
+ }
+
+ if (to_integer_op) {
+ /*
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
+ * We need to determine if it is decimal or hexadecimal.
+ */
+ if ((*string == '0') && (tolower((int)*(string + 1)) == 'x')) {
+ sign_of0x = 1;
+ base = 16;
+
+ /* Skip over the leading '0x' */
+ string += 2;
+ } else {
+ base = 10;
+ }
+ }
+
+ /* Any string left? Check that '0x' is not followed by white space. */
+
+ if (!(*string) || isspace((int)*string) || *string == '\t') {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ goto all_done;
+ }
+ }
+
+ /*
+ * Perform a 32-bit or 64-bit conversion, depending upon the current
+ * execution mode of the interpreter
+ */
+ dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+
+ /* Main loop: convert the string to a 32- or 64-bit integer */
+
+ while (*string) {
+ if (isdigit((int)*string)) {
+
+ /* Convert ASCII 0-9 to Decimal value */
+
+ this_digit = ((u8)*string) - '0';
+ } else if (base == 10) {
+
+ /* Digit is out of range; possible in to_integer case only */
+
+ term = 1;
+ } else {
+ this_digit = (u8)toupper((int)*string);
+ if (isxdigit((int)this_digit)) {
+
+ /* Convert ASCII Hex char to value */
+
+ this_digit = this_digit - 'A' + 10;
+ } else {
+ term = 1;
+ }
+ }
+
+ if (term) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ } else if ((valid_digits == 0) && (this_digit == 0)
+ && !sign_of0x) {
+
+ /* Skip zeros */
+ string++;
+ continue;
+ }
+
+ valid_digits++;
+
+ if (sign_of0x
+ && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
+ /*
+ * This is to_integer operation case.
+ * No any restrictions for string-to-integer conversion,
+ * see ACPI spec.
+ */
+ goto error_exit;
+ }
+
+ /* Divide the digit into the correct position */
+
+ (void)acpi_ut_short_divide((dividend - (u64)this_digit),
+ base, &quotient, NULL);
+
+ if (return_value > quotient) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ }
+
+ return_value *= base;
+ return_value += this_digit;
+ string++;
+ }
+
+ /* All done, normal exit */
+
+all_done:
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(return_value)));
+
+ *ret_integer = return_value;
+ return_ACPI_STATUS(AE_OK);
+
+error_exit:
+ /* Base was set/validated above */
+
+ if (base == 10) {
+ return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
+ } else {
+ return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
+ }
+}
+
+#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
+ *
+ * PARAMETERS: Adds a "DestSize" parameter to each of the standard string
+ * functions. This is the size of the Destination buffer.
+ *
+ * RETURN: TRUE if the operation would overflow the destination buffer.
+ *
+ * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
+ * the result of the operation will not overflow the output string
+ * buffer.
+ *
+ * NOTE: These functions are typically only helpful for processing
+ * user input and command lines. For most ACPICA code, the
+ * required buffer length is precisely calculated before buffer
+ * allocation, so the use of these functions is unnecessary.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
+{
+
+ if (strlen(source) >= dest_size) {
+ return (TRUE);
+ }
+
+ strcpy(dest, source);
+ return (FALSE);
+}
+
+u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
+{
+
+ if ((strlen(dest) + strlen(source)) >= dest_size) {
+ return (TRUE);
+ }
+
+ strcat(dest, source);
+ return (FALSE);
+}
+
+u8
+acpi_ut_safe_strncat(char *dest,
+ acpi_size dest_size,
+ char *source, acpi_size max_transfer_length)
+{
+ acpi_size actual_transfer_length;
+
+ actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source));
+
+ if ((strlen(dest) + actual_transfer_length) >= dest_size) {
+ return (TRUE);
+ }
+
+ strncat(dest, source, max_transfer_length);
+ return (FALSE);
+}
+#endif