summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_via.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_via.c')
-rw-r--r--drivers/ata/pata_via.c568
1 files changed, 568 insertions, 0 deletions
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
new file mode 100644
index 000000000000..2580e1606d9e
--- /dev/null
+++ b/drivers/ata/pata_via.c
@@ -0,0 +1,568 @@
+/*
+ * pata_via.c - VIA PATA for new ATA layer
+ * (C) 2005-2006 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * Documentation
+ * Most chipset documentation available under NDA only
+ *
+ * VIA version guide
+ * VIA VT82C561 - early design, uses ata_generic currently
+ * VIA VT82C576 - MWDMA, 33Mhz
+ * VIA VT82C586 - MWDMA, 33Mhz
+ * VIA VT82C586a - Added UDMA to 33Mhz
+ * VIA VT82C586b - UDMA33
+ * VIA VT82C596a - Nonfunctional UDMA66
+ * VIA VT82C596b - Working UDMA66
+ * VIA VT82C686 - Nonfunctional UDMA66
+ * VIA VT82C686a - Working UDMA66
+ * VIA VT82C686b - Updated to UDMA100
+ * VIA VT8231 - UDMA100
+ * VIA VT8233 - UDMA100
+ * VIA VT8233a - UDMA133
+ * VIA VT8233c - UDMA100
+ * VIA VT8235 - UDMA133
+ * VIA VT8237 - UDMA133
+ *
+ * Most registers remain compatible across chips. Others start reserved
+ * and acquire sensible semantics if set to 1 (eg cable detect). A few
+ * exceptions exist, notably around the FIFO settings.
+ *
+ * One additional quirk of the VIA design is that like ALi they use few
+ * PCI IDs for a lot of chips.
+ *
+ * Based heavily on:
+ *
+ * Version 3.38
+ *
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ * vt8235, vt8237
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ *
+ * Based on the work of:
+ * Michel Aubry
+ * Jeff Garzik
+ * Andre Hedrick
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_via"
+#define DRV_VERSION "0.1.13"
+
+/*
+ * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
+ * driver.
+ */
+
+enum {
+ VIA_UDMA = 0x007,
+ VIA_UDMA_NONE = 0x000,
+ VIA_UDMA_33 = 0x001,
+ VIA_UDMA_66 = 0x002,
+ VIA_UDMA_100 = 0x003,
+ VIA_UDMA_133 = 0x004,
+ VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */
+ VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */
+ VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */
+ VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */
+ VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */
+ VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */
+ VIA_NO_ENABLES = 0x400, /* Has no enablebits */
+};
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static const struct via_isa_bridge {
+ const char *name;
+ u16 id;
+ u8 rev_min;
+ u8 rev_max;
+ u16 flags;
+} via_isa_bridges[] = {
+ { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+ { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { NULL }
+};
+
+/**
+ * via_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection. Actually for the VIA case the BIOS
+ * already did this for us. We read the values provided by the
+ * BIOS. If you are using an 8235 in a non-PC configuration you
+ * may need to update this code.
+ *
+ * Hotplug also impacts on this.
+ */
+
+static int via_cable_detect(struct ata_port *ap) {
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 ata66;
+
+ pci_read_config_dword(pdev, 0x50, &ata66);
+ /* Check both the drive cable reporting bits, we might not have
+ two drives */
+ if (ata66 & (0x10100000 >> (16 * ap->port_no)))
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+static int via_pre_reset(struct ata_port *ap)
+{
+ const struct via_isa_bridge *config = ap->host->private_data;
+
+ if (!(config->flags & VIA_NO_ENABLES)) {
+ static const struct pci_bits via_enable_bits[] = {
+ { 0x40, 1, 0x02, 0x02 },
+ { 0x40, 1, 0x01, 0x01 }
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ }
+
+ if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
+ ap->cbl = via_cable_detect(ap);
+ else
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+
+/**
+ * via_error_handler - reset for VIA chips
+ * @ap: ATA port
+ *
+ * Handle the reset callback for the later chips with cable detect
+ */
+
+static void via_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * via_do_set_mode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @mode: ATA mode being programmed
+ * @tdiv: Clocks per PCI clock
+ * @set_ast: Set to program address setup
+ * @udma_type: UDMA mode/format of registers
+ *
+ * Program the VIA registers for DMA and PIO modes. Uses the ata timing
+ * support in order to compute modes.
+ *
+ * FIXME: Hotplug will require we serialize multiple mode changes
+ * on the two channels.
+ */
+
+static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct ata_device *peer = ata_dev_pair(adev);
+ struct ata_timing t, p;
+ static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */
+ unsigned long T = 1000000000 / via_clock;
+ unsigned long UT = T/tdiv;
+ int ut;
+ int offset = 3 - (2*ap->port_no) - adev->devno;
+
+
+ /* Calculate the timing values we require */
+ ata_timing_compute(adev, mode, &t, T, UT);
+
+ /* We share 8bit timing so we must merge the constraints */
+ if (peer) {
+ if (peer->pio_mode) {
+ ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
+ }
+ }
+
+ /* Address setup is programmable but breaks on UDMA133 setups */
+ if (set_ast) {
+ u8 setup; /* 2 bits per drive */
+ int shift = 2 * offset;
+
+ pci_read_config_byte(pdev, 0x4C, &setup);
+ setup &= ~(3 << shift);
+ setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ pci_write_config_byte(pdev, 0x4C, setup);
+ }
+
+ /* Load the PIO mode bits */
+ pci_write_config_byte(pdev, 0x4F - ap->port_no,
+ ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+ pci_write_config_byte(pdev, 0x48 + offset,
+ ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+
+ /* Load the UDMA bits according to type */
+ switch(udma_type) {
+ default:
+ /* BUG() ? */
+ /* fall through */
+ case 33:
+ ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+ break;
+ case 66:
+ ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+ break;
+ case 100:
+ ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ break;
+ case 133:
+ ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ break;
+ }
+ /* Set UDMA unless device is not UDMA capable */
+ if (udma_type)
+ pci_write_config_byte(pdev, 0x50 + offset, ut);
+}
+
+static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ const struct via_isa_bridge *config = ap->host->private_data;
+ int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+ int mode = config->flags & VIA_UDMA;
+ static u8 tclock[5] = { 1, 1, 2, 3, 4 };
+ static u8 udma[5] = { 0, 33, 66, 100, 133 };
+
+ via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]);
+}
+
+static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ const struct via_isa_bridge *config = ap->host->private_data;
+ int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+ int mode = config->flags & VIA_UDMA;
+ static u8 tclock[5] = { 1, 1, 2, 3, 4 };
+ static u8 udma[5] = { 0, 33, 66, 100, 133 };
+
+ via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
+}
+
+static struct scsi_host_template via_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations via_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = via_set_piomode,
+ .set_dmamode = via_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = via_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct ata_port_operations via_port_ops_noirq = {
+ .port_disable = ata_port_disable,
+ .set_piomode = via_set_piomode,
+ .set_dmamode = via_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = via_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer_noirq,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/**
+ * via_init_one - discovery callback
+ * @pdev: PCI device ID
+ * @id: PCI table info
+ *
+ * A VIA IDE interface has been discovered. Figure out what revision
+ * and perform configuration work before handing it to the ATA layer
+ */
+
+static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ /* Early VIA without UDMA support */
+ static struct ata_port_info via_mwdma_info = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .port_ops = &via_port_ops
+ };
+ /* Ditto with IRQ masking required */
+ static struct ata_port_info via_mwdma_info_borked = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .port_ops = &via_port_ops_noirq,
+ };
+ /* VIA UDMA 33 devices (and borked 66) */
+ static struct ata_port_info via_udma33_info = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7,
+ .port_ops = &via_port_ops
+ };
+ /* VIA UDMA 66 devices */
+ static struct ata_port_info via_udma66_info = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x1f,
+ .port_ops = &via_port_ops
+ };
+ /* VIA UDMA 100 devices */
+ static struct ata_port_info via_udma100_info = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x3f,
+ .port_ops = &via_port_ops
+ };
+ /* UDMA133 with bad AST (All current 133) */
+ static struct ata_port_info via_udma133_info = {
+ .sht = &via_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f, /* FIXME: should check north bridge */
+ .port_ops = &via_port_ops
+ };
+ struct ata_port_info *port_info[2], *type;
+ struct pci_dev *isa = NULL;
+ const struct via_isa_bridge *config;
+ static int printed_version;
+ u8 t;
+ u8 enable;
+ u32 timing;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /* To find out how the IDE will behave and what features we
+ actually have to look at the bridge not the IDE controller */
+ for (config = via_isa_bridges; config->id; config++)
+ if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
+ !!(config->flags & VIA_BAD_ID),
+ config->id, NULL))) {
+
+ pci_read_config_byte(isa, PCI_REVISION_ID, &t);
+ if (t >= config->rev_min &&
+ t <= config->rev_max)
+ break;
+ pci_dev_put(isa);
+ }
+
+ if (!config->id) {
+ printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
+ return -ENODEV;
+ }
+ pci_dev_put(isa);
+
+ /* 0x40 low bits indicate enabled channels */
+ pci_read_config_byte(pdev, 0x40 , &enable);
+ enable &= 3;
+ if (enable == 0) {
+ return -ENODEV;
+ }
+
+ /* Initialise the FIFO for the enabled channels. */
+ if (config->flags & VIA_SET_FIFO) {
+ u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+ u8 fifo;
+
+ pci_read_config_byte(pdev, 0x43, &fifo);
+
+ /* Clear PREQ# until DDACK# for errata */
+ if (config->flags & VIA_BAD_PREQ)
+ fifo &= 0x7F;
+ else
+ fifo &= 0x9f;
+ /* Turn on FIFO for enabled channels */
+ fifo |= fifo_setting[enable];
+ pci_write_config_byte(pdev, 0x43, fifo);
+ }
+ /* Clock set up */
+ switch(config->flags & VIA_UDMA) {
+ case VIA_UDMA_NONE:
+ if (config->flags & VIA_NO_UNMASK)
+ type = &via_mwdma_info_borked;
+ else
+ type = &via_mwdma_info;
+ break;
+ case VIA_UDMA_33:
+ type = &via_udma33_info;
+ break;
+ case VIA_UDMA_66:
+ type = &via_udma66_info;
+ /* The 66 MHz devices require we enable the clock */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing |= 0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ break;
+ case VIA_UDMA_100:
+ type = &via_udma100_info;
+ break;
+ case VIA_UDMA_133:
+ type = &via_udma133_info;
+ break;
+ default:
+ WARN_ON(1);
+ return -ENODEV;
+ }
+
+ if (config->flags & VIA_BAD_CLK66) {
+ /* Disable the 66MHz clock on problem devices */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing &= ~0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+
+ /* We have established the device type, now fire it up */
+ type->private_data = (void *)config;
+
+ port_info[0] = port_info[1] = type;
+ return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id via[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1), },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1), },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410), },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), },
+ { 0, },
+};
+
+static struct pci_driver via_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = via,
+ .probe = via_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init via_init(void)
+{
+ return pci_register_driver(&via_pci_driver);
+}
+
+
+static void __exit via_exit(void)
+{
+ pci_unregister_driver(&via_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for VIA PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, via);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(via_init);
+module_exit(via_exit);