summaryrefslogtreecommitdiff
path: root/drivers/ata/sata_highbank.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_highbank.c')
-rw-r--r--drivers/ata/sata_highbank.c20
1 files changed, 18 insertions, 2 deletions
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 8de8ac80335b..d047d92a456f 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -339,10 +339,26 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
return 0;
}
+/*
+ * The Calxeda SATA phy intermittently fails to bring up a link with Gen3
+ * Retrying the phy hard reset can work around the issue, but the drive
+ * may fail again. In less than 150 out of 15000 test runs, it took more
+ * than 10 tries for the link to be established (but never more than 35).
+ * Triple the maximum observed retry count to provide plenty of margin for
+ * rare events and to guarantee that the link is established.
+ *
+ * Also, the default 2 second time-out on a failed drive is too long in
+ * this situation. The uboot implementation of the same driver function
+ * uses a much shorter time-out period and never experiences a time out
+ * issue. Reducing the time-out to 500ms improves the responsiveness.
+ * The other timing constants were kept the same as the stock AHCI driver.
+ * This change was also tested 15000 times on 24 drives and none of them
+ * experienced a time out.
+ */
static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
@@ -350,7 +366,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
bool online;
u32 sstatus;
int rc;
- int retry = 10;
+ int retry = 100;
ahci_stop_engine(ap);