diff options
Diffstat (limited to 'drivers/block/paride/paride.h')
| -rw-r--r-- | drivers/block/paride/paride.h | 172 |
1 files changed, 0 insertions, 172 deletions
diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h deleted file mode 100644 index ddb9e589da7f..000000000000 --- a/drivers/block/paride/paride.h +++ /dev/null @@ -1,172 +0,0 @@ -#ifndef __DRIVERS_PARIDE_H__ -#define __DRIVERS_PARIDE_H__ - -/* - paride.h (c) 1997-8 Grant R. Guenther <grant@torque.net> - Under the terms of the GPL. - - This file defines the interface between the high-level parallel - IDE device drivers (pd, pf, pcd, pt) and the adapter chips. - -*/ - -/* Changes: - - 1.01 GRG 1998.05.05 init_proto, release_proto -*/ - -#define PARIDE_H_VERSION "1.01" - -/* Some adapters need to know what kind of device they are in - - Values for devtype: -*/ - -#define PI_PD 0 /* IDE disk */ -#define PI_PCD 1 /* ATAPI CDrom */ -#define PI_PF 2 /* ATAPI disk */ -#define PI_PT 3 /* ATAPI tape */ -#define PI_PG 4 /* ATAPI generic */ - -/* The paride module contains no state, instead the drivers allocate - a pi_adapter data structure and pass it to paride in every operation. - -*/ - -struct pi_adapter { - - struct pi_protocol *proto; /* adapter protocol */ - int port; /* base address of parallel port */ - int mode; /* transfer mode in use */ - int delay; /* adapter delay setting */ - int devtype; /* device type: PI_PD etc. */ - char *device; /* name of driver */ - int unit; /* unit number for chained adapters */ - int saved_r0; /* saved port state */ - int saved_r2; /* saved port state */ - int reserved; /* number of ports reserved */ - unsigned long private; /* for protocol module */ - - wait_queue_head_t parq; /* semaphore for parport sharing */ - void *pardev; /* pointer to pardevice */ - char *parname; /* parport name */ - int claimed; /* parport has already been claimed */ - void (*claim_cont)(void); /* continuation for parport wait */ -}; - -typedef struct pi_adapter PIA; - -/* functions exported by paride to the high level drivers */ - -extern int pi_init(PIA *pi, - int autoprobe, /* 1 to autoprobe */ - int port, /* base port address */ - int mode, /* -1 for autoprobe */ - int unit, /* unit number, if supported */ - int protocol, /* protocol to use */ - int delay, /* -1 to use adapter specific default */ - char * scratch, /* address of 512 byte buffer */ - int devtype, /* device type: PI_PD, PI_PCD, etc ... */ - int verbose, /* log verbose data while probing */ - char *device /* name of the driver */ - ); /* returns 0 on failure, 1 on success */ - -extern void pi_release(PIA *pi); - -/* registers are addressed as (cont,regr) - - cont: 0 for command register file, 1 for control register(s) - regr: 0-7 for register number. - -*/ - -extern void pi_write_regr(PIA *pi, int cont, int regr, int val); - -extern int pi_read_regr(PIA *pi, int cont, int regr); - -extern void pi_write_block(PIA *pi, char * buf, int count); - -extern void pi_read_block(PIA *pi, char * buf, int count); - -extern void pi_connect(PIA *pi); - -extern void pi_disconnect(PIA *pi); - -extern void pi_do_claimed(PIA *pi, void (*cont)(void)); -extern int pi_schedule_claimed(PIA *pi, void (*cont)(void)); - -/* macros and functions exported to the protocol modules */ - -#define delay_p (pi->delay?udelay(pi->delay):(void)0) -#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p; -#define in_p(offs) (delay_p,inb(pi->port+offs)) - -#define w0(byte) {out_p(0,byte);} -#define r0() (in_p(0) & 0xff) -#define w1(byte) {out_p(1,byte);} -#define r1() (in_p(1) & 0xff) -#define w2(byte) {out_p(2,byte);} -#define r2() (in_p(2) & 0xff) -#define w3(byte) {out_p(3,byte);} -#define w4(byte) {out_p(4,byte);} -#define r4() (in_p(4) & 0xff) -#define w4w(data) {outw(data,pi->port+4); delay_p;} -#define w4l(data) {outl(data,pi->port+4); delay_p;} -#define r4w() (delay_p,inw(pi->port+4)&0xffff) -#define r4l() (delay_p,inl(pi->port+4)&0xffffffff) - -static inline u16 pi_swab16( char *b, int k) - -{ union { u16 u; char t[2]; } r; - - r.t[0]=b[2*k+1]; r.t[1]=b[2*k]; - return r.u; -} - -static inline u32 pi_swab32( char *b, int k) - -{ union { u32 u; char f[4]; } r; - - r.f[0]=b[4*k+1]; r.f[1]=b[4*k]; - r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2]; - return r.u; -} - -struct pi_protocol { - - char name[8]; /* name for this protocol */ - int index; /* index into protocol table */ - - int max_mode; /* max mode number */ - int epp_first; /* modes >= this use 8 ports */ - - int default_delay; /* delay parameter if not specified */ - int max_units; /* max chained units probed for */ - - void (*write_regr)(PIA *,int,int,int); - int (*read_regr)(PIA *,int,int); - void (*write_block)(PIA *,char *,int); - void (*read_block)(PIA *,char *,int); - - void (*connect)(PIA *); - void (*disconnect)(PIA *); - - int (*test_port)(PIA *); - int (*probe_unit)(PIA *); - int (*test_proto)(PIA *,char *,int); - void (*log_adapter)(PIA *,char *,int); - - int (*init_proto)(PIA *); - void (*release_proto)(PIA *); - struct module *owner; -}; - -typedef struct pi_protocol PIP; - -extern int paride_register( PIP * ); -extern void paride_unregister ( PIP * ); -void *pi_register_driver(char *); -void pi_unregister_driver(void *); - -#endif /* __DRIVERS_PARIDE_H__ */ -/* end of paride.h */ |