diff options
Diffstat (limited to 'drivers/block/skd_s1120.h')
-rw-r--r-- | drivers/block/skd_s1120.h | 322 |
1 files changed, 0 insertions, 322 deletions
diff --git a/drivers/block/skd_s1120.h b/drivers/block/skd_s1120.h deleted file mode 100644 index c30bb98c7cd2..000000000000 --- a/drivers/block/skd_s1120.h +++ /dev/null @@ -1,322 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2012 STEC, Inc. - * Copyright (c) 2017 Western Digital Corporation or its affiliates. - */ - - -#ifndef SKD_S1120_H -#define SKD_S1120_H - -/* - * Q-channel, 64-bit r/w - */ -#define FIT_Q_COMMAND 0x400u -#define FIT_QCMD_QID_MASK (0x3 << 1) -#define FIT_QCMD_QID0 (0x0 << 1) -#define FIT_QCMD_QID_NORMAL FIT_QCMD_QID0 -#define FIT_QCMD_QID1 (0x1 << 1) -#define FIT_QCMD_QID2 (0x2 << 1) -#define FIT_QCMD_QID3 (0x3 << 1) -#define FIT_QCMD_FLUSH_QUEUE (0ull) /* add QID */ -#define FIT_QCMD_MSGSIZE_MASK (0x3 << 4) -#define FIT_QCMD_MSGSIZE_64 (0x0 << 4) -#define FIT_QCMD_MSGSIZE_128 (0x1 << 4) -#define FIT_QCMD_MSGSIZE_256 (0x2 << 4) -#define FIT_QCMD_MSGSIZE_512 (0x3 << 4) -#define FIT_QCMD_ALIGN L1_CACHE_BYTES - -/* - * Control, 32-bit r/w - */ -#define FIT_CONTROL 0x500u -#define FIT_CR_HARD_RESET (1u << 0u) -#define FIT_CR_SOFT_RESET (1u << 1u) -#define FIT_CR_DIS_TIMESTAMPS (1u << 6u) -#define FIT_CR_ENABLE_INTERRUPTS (1u << 7u) - -/* - * Status, 32-bit, r/o - */ -#define FIT_STATUS 0x510u -#define FIT_SR_DRIVE_STATE_MASK 0x000000FFu -#define FIT_SR_SIGNATURE (0xFF << 8) -#define FIT_SR_PIO_DMA (1 << 16) -#define FIT_SR_DRIVE_OFFLINE 0x00 -#define FIT_SR_DRIVE_INIT 0x01 -/* #define FIT_SR_DRIVE_READY 0x02 */ -#define FIT_SR_DRIVE_ONLINE 0x03 -#define FIT_SR_DRIVE_BUSY 0x04 -#define FIT_SR_DRIVE_FAULT 0x05 -#define FIT_SR_DRIVE_DEGRADED 0x06 -#define FIT_SR_PCIE_LINK_DOWN 0x07 -#define FIT_SR_DRIVE_SOFT_RESET 0x08 -#define FIT_SR_DRIVE_INIT_FAULT 0x09 -#define FIT_SR_DRIVE_BUSY_SANITIZE 0x0A -#define FIT_SR_DRIVE_BUSY_ERASE 0x0B -#define FIT_SR_DRIVE_FW_BOOTING 0x0C -#define FIT_SR_DRIVE_NEED_FW_DOWNLOAD 0xFE -#define FIT_SR_DEVICE_MISSING 0xFF -#define FIT_SR__RESERVED 0xFFFFFF00u - -/* - * FIT_STATUS - Status register data definition - */ -#define FIT_SR_STATE_MASK (0xFF << 0) -#define FIT_SR_SIGNATURE (0xFF << 8) -#define FIT_SR_PIO_DMA (1 << 16) - -/* - * Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear) - */ -#define FIT_INT_STATUS_HOST 0x520u -#define FIT_ISH_FW_STATE_CHANGE (1u << 0u) -#define FIT_ISH_COMPLETION_POSTED (1u << 1u) -#define FIT_ISH_MSG_FROM_DEV (1u << 2u) -#define FIT_ISH_UNDEFINED_3 (1u << 3u) -#define FIT_ISH_UNDEFINED_4 (1u << 4u) -#define FIT_ISH_Q0_FULL (1u << 5u) -#define FIT_ISH_Q1_FULL (1u << 6u) -#define FIT_ISH_Q2_FULL (1u << 7u) -#define FIT_ISH_Q3_FULL (1u << 8u) -#define FIT_ISH_QCMD_FIFO_OVERRUN (1u << 9u) -#define FIT_ISH_BAD_EXP_ROM_READ (1u << 10u) - -#define FIT_INT_DEF_MASK \ - (FIT_ISH_FW_STATE_CHANGE | \ - FIT_ISH_COMPLETION_POSTED | \ - FIT_ISH_MSG_FROM_DEV | \ - FIT_ISH_Q0_FULL | \ - FIT_ISH_Q1_FULL | \ - FIT_ISH_Q2_FULL | \ - FIT_ISH_Q3_FULL | \ - FIT_ISH_QCMD_FIFO_OVERRUN | \ - FIT_ISH_BAD_EXP_ROM_READ) - -#define FIT_INT_QUEUE_FULL \ - (FIT_ISH_Q0_FULL | \ - FIT_ISH_Q1_FULL | \ - FIT_ISH_Q2_FULL | \ - FIT_ISH_Q3_FULL) - -#define MSI_MSG_NWL_ERROR_0 0x00000000 -#define MSI_MSG_NWL_ERROR_1 0x00000001 -#define MSI_MSG_NWL_ERROR_2 0x00000002 -#define MSI_MSG_NWL_ERROR_3 0x00000003 -#define MSI_MSG_STATE_CHANGE 0x00000004 -#define MSI_MSG_COMPLETION_POSTED 0x00000005 -#define MSI_MSG_MSG_FROM_DEV 0x00000006 -#define MSI_MSG_RESERVED_0 0x00000007 -#define MSI_MSG_RESERVED_1 0x00000008 -#define MSI_MSG_QUEUE_0_FULL 0x00000009 -#define MSI_MSG_QUEUE_1_FULL 0x0000000A -#define MSI_MSG_QUEUE_2_FULL 0x0000000B -#define MSI_MSG_QUEUE_3_FULL 0x0000000C - -#define FIT_INT_RESERVED_MASK \ - (FIT_ISH_UNDEFINED_3 | \ - FIT_ISH_UNDEFINED_4) - -/* - * Interrupt mask, 32-bit r/w - * Bit definitions are the same as FIT_INT_STATUS_HOST - */ -#define FIT_INT_MASK_HOST 0x528u - -/* - * Message to device, 32-bit r/w - */ -#define FIT_MSG_TO_DEVICE 0x540u - -/* - * Message from device, 32-bit, r/o - */ -#define FIT_MSG_FROM_DEVICE 0x548u - -/* - * 32-bit messages to/from device, composition/extraction macros - */ -#define FIT_MXD_CONS(TYPE, PARAM, DATA) \ - ((((TYPE) & 0xFFu) << 24u) | \ - (((PARAM) & 0xFFu) << 16u) | \ - (((DATA) & 0xFFFFu) << 0u)) -#define FIT_MXD_TYPE(MXD) (((MXD) >> 24u) & 0xFFu) -#define FIT_MXD_PARAM(MXD) (((MXD) >> 16u) & 0xFFu) -#define FIT_MXD_DATA(MXD) (((MXD) >> 0u) & 0xFFFFu) - -/* - * Types of messages to/from device - */ -#define FIT_MTD_FITFW_INIT 0x01u -#define FIT_MTD_GET_CMDQ_DEPTH 0x02u -#define FIT_MTD_SET_COMPQ_DEPTH 0x03u -#define FIT_MTD_SET_COMPQ_ADDR 0x04u -#define FIT_MTD_ARM_QUEUE 0x05u -#define FIT_MTD_CMD_LOG_HOST_ID 0x07u -#define FIT_MTD_CMD_LOG_TIME_STAMP_LO 0x08u -#define FIT_MTD_CMD_LOG_TIME_STAMP_HI 0x09u -#define FIT_MFD_SMART_EXCEEDED 0x10u -#define FIT_MFD_POWER_DOWN 0x11u -#define FIT_MFD_OFFLINE 0x12u -#define FIT_MFD_ONLINE 0x13u -#define FIT_MFD_FW_RESTARTING 0x14u -#define FIT_MFD_PM_ACTIVE 0x15u -#define FIT_MFD_PM_STANDBY 0x16u -#define FIT_MFD_PM_SLEEP 0x17u -#define FIT_MFD_CMD_PROGRESS 0x18u - -#define FIT_MTD_DEBUG 0xFEu -#define FIT_MFD_DEBUG 0xFFu - -#define FIT_MFD_MASK (0xFFu) -#define FIT_MFD_DATA_MASK (0xFFu) -#define FIT_MFD_MSG(x) (((x) >> 24) & FIT_MFD_MASK) -#define FIT_MFD_DATA(x) ((x) & FIT_MFD_MASK) - -/* - * Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w - * Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR) - * (was Response buffer in docs) - */ -#define FIT_MSG_TO_DEVICE_ARG 0x580u - -/* - * Hardware (ASIC) version, 32-bit r/o - */ -#define FIT_HW_VERSION 0x588u - -/* - * Scatter/gather list descriptor. - * 32-bytes and must be aligned on a 32-byte boundary. - * All fields are in little endian order. - */ -struct fit_sg_descriptor { - uint32_t control; - uint32_t byte_count; - uint64_t host_side_addr; - uint64_t dev_side_addr; - uint64_t next_desc_ptr; -}; - -#define FIT_SGD_CONTROL_NOT_LAST 0x000u -#define FIT_SGD_CONTROL_LAST 0x40Eu - -/* - * Header at the beginning of a FIT message. The header - * is followed by SSDI requests each 64 bytes. - * A FIT message can be up to 512 bytes long and must start - * on a 64-byte boundary. - */ -struct fit_msg_hdr { - uint8_t protocol_id; - uint8_t num_protocol_cmds_coalesced; - uint8_t _reserved[62]; -}; - -#define FIT_PROTOCOL_ID_FIT 1 -#define FIT_PROTOCOL_ID_SSDI 2 -#define FIT_PROTOCOL_ID_SOFIT 3 - - -#define FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF) -#define FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF) - -/* - * Format of a completion entry. The completion queue is circular - * and must have at least as many entries as the maximum number - * of commands that may be issued to the device. - * - * There are no head/tail pointers. The cycle value is used to - * infer the presence of new completion records. - * Initially the cycle in all entries is 0, the index is 0, and - * the cycle value to expect is 1. When completions are added - * their cycle values are set to 1. When the index wraps the - * cycle value to expect is incremented. - * - * Command_context is opaque and taken verbatim from the SSDI command. - * All other fields are big endian. - */ -#define FIT_PROTOCOL_VERSION_0 0 - -/* - * Protocol major version 1 completion entry. - * The major protocol version is found in bits - * 20-23 of the FIT_MTD_FITFW_INIT response. - */ -struct fit_completion_entry_v1 { - __be32 num_returned_bytes; - uint16_t tag; - uint8_t status; /* SCSI status */ - uint8_t cycle; -}; -#define FIT_PROTOCOL_VERSION_1 1 -#define FIT_PROTOCOL_VERSION_CURRENT FIT_PROTOCOL_VERSION_1 - -struct fit_comp_error_info { - uint8_t type:7; /* 00: Bits0-6 indicates the type of sense data. */ - uint8_t valid:1; /* 00: Bit 7 := 1 ==> info field is valid. */ - uint8_t reserved0; /* 01: Obsolete field */ - uint8_t key:4; /* 02: Bits0-3 indicate the sense key. */ - uint8_t reserved2:1; /* 02: Reserved bit. */ - uint8_t bad_length:1; /* 02: Incorrect Length Indicator */ - uint8_t end_medium:1; /* 02: End of Medium */ - uint8_t file_mark:1; /* 02: Filemark */ - uint8_t info[4]; /* 03: */ - uint8_t reserved1; /* 07: Additional Sense Length */ - uint8_t cmd_spec[4]; /* 08: Command Specific Information */ - uint8_t code; /* 0C: Additional Sense Code */ - uint8_t qual; /* 0D: Additional Sense Code Qualifier */ - uint8_t fruc; /* 0E: Field Replaceable Unit Code */ - uint8_t sks_high:7; /* 0F: Sense Key Specific (MSB) */ - uint8_t sks_valid:1; /* 0F: Sense Key Specific Valid */ - uint16_t sks_low; /* 10: Sense Key Specific (LSW) */ - uint16_t reserved3; /* 12: Part of additional sense bytes (unused) */ - uint16_t uec; /* 14: Additional Sense Bytes */ - uint64_t per __packed; /* 16: Additional Sense Bytes */ - uint8_t reserved4[2]; /* 1E: Additional Sense Bytes (unused) */ -}; - - -/* Task management constants */ -#define SOFT_TASK_SIMPLE 0x00 -#define SOFT_TASK_HEAD_OF_QUEUE 0x01 -#define SOFT_TASK_ORDERED 0x02 - -/* Version zero has the last 32 bits reserved, - * Version one has the last 32 bits sg_list_len_bytes; - */ -struct skd_command_header { - __be64 sg_list_dma_address; - uint16_t tag; - uint8_t attribute; - uint8_t add_cdb_len; /* In 32 bit words */ - __be32 sg_list_len_bytes; -}; - -struct skd_scsi_request { - struct skd_command_header hdr; - unsigned char cdb[16]; -/* unsigned char _reserved[16]; */ -}; - -struct driver_inquiry_data { - uint8_t peripheral_device_type:5; - uint8_t qualifier:3; - uint8_t page_code; - __be16 page_length; - __be16 pcie_bus_number; - uint8_t pcie_device_number; - uint8_t pcie_function_number; - uint8_t pcie_link_speed; - uint8_t pcie_link_lanes; - __be16 pcie_vendor_id; - __be16 pcie_device_id; - __be16 pcie_subsystem_vendor_id; - __be16 pcie_subsystem_device_id; - uint8_t reserved1[2]; - uint8_t reserved2[3]; - uint8_t driver_version_length; - uint8_t driver_version[0x14]; -}; - -#endif /* SKD_S1120_H */ |