summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/Kconfig15
-rw-r--r--drivers/bluetooth/Makefile1
-rw-r--r--drivers/bluetooth/ath3k.c6
-rw-r--r--drivers/bluetooth/bt3c_cs.c3
-rw-r--r--drivers/bluetooth/btbcm.c138
-rw-r--r--drivers/bluetooth/btbcm.h61
-rw-r--r--drivers/bluetooth/btintel.c6
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c2
-rw-r--r--drivers/bluetooth/btrtl.c390
-rw-r--r--drivers/bluetooth/btrtl.h52
-rw-r--r--drivers/bluetooth/btusb.c572
-rw-r--r--drivers/bluetooth/btwilink.c2
-rw-r--r--drivers/bluetooth/hci_ath.c1
-rw-r--r--drivers/bluetooth/hci_bcm.c107
-rw-r--r--drivers/bluetooth/hci_bcsp.c20
-rw-r--r--drivers/bluetooth/hci_h4.c1
-rw-r--r--drivers/bluetooth/hci_ldisc.c123
-rw-r--r--drivers/bluetooth/hci_uart.h11
-rw-r--r--drivers/bluetooth/hci_vhci.c2
19 files changed, 1007 insertions, 506 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index ed5c2738bea2..2e777071e1dc 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -9,6 +9,10 @@ config BT_BCM
tristate
select FW_LOADER
+config BT_RTL
+ tristate
+ select FW_LOADER
+
config BT_HCIBTUSB
tristate "HCI USB driver"
depends on USB
@@ -32,6 +36,17 @@ config BT_HCIBTUSB_BCM
Say Y here to compile support for Broadcom protocol.
+config BT_HCIBTUSB_RTL
+ bool "Realtek protocol support"
+ depends on BT_HCIBTUSB
+ select BT_RTL
+ default y
+ help
+ The Realtek protocol support enables firmware and configuration
+ download support for Realtek Bluetooth controllers.
+
+ Say Y here to compile support for Realtek protocol.
+
config BT_HCIBTSDIO
tristate "HCI SDIO driver"
depends on MMC
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index dd0d9c40b999..f40e194e7080 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
+obj-$(CONFIG_BT_RTL) += btrtl.o
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 8c81af6dbe06..e527a3e13939 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe05f) },
+ { USB_DEVICE(0x0489, 0xe076) },
{ USB_DEVICE(0x0489, 0xe078) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -88,6 +89,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3007) },
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x04CA, 0x300b) },
+ { USB_DEVICE(0x04CA, 0x300d) },
{ USB_DEVICE(0x04CA, 0x300f) },
{ USB_DEVICE(0x04CA, 0x3010) },
{ USB_DEVICE(0x0930, 0x0219) },
@@ -113,6 +115,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
+ { USB_DEVICE(0x13d3, 0x3474) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -137,6 +140,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -145,6 +149,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -170,6 +175,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 6de97b3871b0..7aab65427d38 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -202,9 +202,8 @@ static void bt3c_write_wakeup(struct bt3c_info *info)
/* Send frame */
len = bt3c_write(iobase, 256, skb->data, skb->len);
- if (len != skb->len) {
+ if (len != skb->len)
BT_ERR("Very strange");
- }
kfree_skb(skb);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 4bba86677adc..1e1a4323a71f 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -33,6 +33,7 @@
#define VERSION "0.1"
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
@@ -55,17 +56,19 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
- if (bda->status) {
- BT_ERR("%s: BCM: Device address result failed (%02x)",
- hdev->name, bda->status);
- kfree_skb(skb);
- return -bt_to_errno(bda->status);
- }
- /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+ /* Check if the address indicates a controller with either an
+ * invalid or default address. In both cases the device needs
+ * to be marked as not having a valid address.
+ *
+ * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
* with no configured address.
+ *
+ * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
+ * with waiting for configuration state.
*/
- if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
+ if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+ !bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) {
BT_INFO("%s: BCM: Using default device address (%pMR)",
hdev->name, &bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -95,21 +98,14 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
-int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;
- const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
struct sk_buff *skb;
u16 opcode;
- int err;
-
- err = request_firmware(&fw, firmware, &hdev->dev);
- if (err < 0) {
- BT_INFO("%s: BCM: Patch %s not found", hdev->name, firmware);
- return err;
- }
+ int err = 0;
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
@@ -135,8 +131,7 @@ int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
- BT_ERR("%s: BCM: Patch %s is corrupted", hdev->name,
- firmware);
+ BT_ERR("%s: BCM: Patch is corrupted", hdev->name);
err = -EINVAL;
goto done;
}
@@ -162,7 +157,6 @@ int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
msleep(250);
done:
- release_firmware(fw);
return err;
}
EXPORT_SYMBOL(btbcm_patchram);
@@ -248,9 +242,101 @@ static const struct {
const char *name;
} bcm_uart_subver_table[] = {
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
+ { 0x4406, "BCM4324B3" }, /* 002.004.006 */
+ { 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
+{
+ u16 subver, rev;
+ const char *hw_name = NULL;
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ int i, err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ /* Read Verbose Config Version Info */
+ skb = btbcm_read_verbose_config(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+ kfree_skb(skb);
+
+ switch ((rev & 0xf000) >> 12) {
+ case 0:
+ case 1:
+ case 3:
+ for (i = 0; bcm_uart_subver_table[i].name; i++) {
+ if (subver == bcm_uart_subver_table[i].subver) {
+ hw_name = bcm_uart_subver_table[i].name;
+ break;
+ }
+ }
+
+ snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
+ break;
+ default:
+ return 0;
+ }
+
+ BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ hw_name ? : "BCM", (subver & 0x7000) >> 13,
+ (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_initialize);
+
+int btbcm_finalize(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ u16 subver, rev;
+ int err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
+ (subver & 0x00ff), rev & 0x0fff);
+
+ btbcm_check_bdaddr(hdev);
+
+ set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_finalize);
+
static const struct {
u16 subver;
const char *name;
@@ -271,6 +357,7 @@ static const struct {
int btbcm_setup_patchram(struct hci_dev *hdev)
{
char fw_name[64];
+ const struct firmware *fw;
u16 subver, rev, pid, vid;
const char *hw_name = NULL;
struct sk_buff *skb;
@@ -302,6 +389,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
switch ((rev & 0xf000) >> 12) {
case 0:
+ case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
hw_name = bcm_uart_subver_table[i].name;
@@ -341,9 +429,15 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
- err = btbcm_patchram(hdev, fw_name);
- if (err == -ENOENT)
+ err = request_firmware(&fw, fw_name, &hdev->dev);
+ if (err < 0) {
+ BT_INFO("%s: BCM: Patch %s not found", hdev->name, fw_name);
return 0;
+ }
+
+ btbcm_patchram(hdev, fw);
+
+ release_firmware(fw);
/* Reset */
err = btbcm_reset(hdev);
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index eb6ab5f9483d..d9e6b41658e5 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -21,15 +21,61 @@
*
*/
+#define BCM_UART_CLOCK_48MHZ 0x01
+#define BCM_UART_CLOCK_24MHZ 0x02
+
+struct bcm_update_uart_baud_rate {
+ __le16 zero;
+ __le32 baud_rate;
+} __packed;
+
+struct bcm_write_uart_clock_setting {
+ __u8 type;
+} __packed;
+
+struct bcm_set_sleep_mode {
+ __u8 sleep_mode;
+ __u8 idle_host;
+ __u8 idle_dev;
+ __u8 bt_wake_active;
+ __u8 host_wake_active;
+ __u8 allow_host_sleep;
+ __u8 combine_modes;
+ __u8 tristate_control;
+ __u8 usb_auto_sleep;
+ __u8 usb_resume_timeout;
+ __u8 pulsed_host_wake;
+ __u8 break_to_host;
+} __packed;
+
+struct bcm_set_pcm_int_params {
+ __u8 routing;
+ __u8 rate;
+ __u8 frame_sync;
+ __u8 sync_mode;
+ __u8 clock_mode;
+} __packed;
+
+struct bcm_set_pcm_format_params {
+ __u8 lsb_first;
+ __u8 fill_value;
+ __u8 fill_method;
+ __u8 fill_num;
+ __u8 right_justify;
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
-int btbcm_patchram(struct hci_dev *hdev, const char *firmware);
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
int btbcm_setup_patchram(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len);
+int btbcm_finalize(struct hci_dev *hdev);
+
#else
static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
@@ -42,7 +88,7 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return -EOPNOTSUPP;
}
-static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
return -EOPNOTSUPP;
}
@@ -57,4 +103,15 @@ static inline int btbcm_setup_apple(struct hci_dev *hdev)
return 0;
}
+static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
+ size_t len)
+{
+ return 0;
+}
+
+static inline int btbcm_finalize(struct hci_dev *hdev)
+{
+ return 0;
+}
+
#endif
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 2d43d4279b00..828f2f8d1568 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -53,12 +53,6 @@ int btintel_check_bdaddr(struct hci_dev *hdev)
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
- if (bda->status) {
- BT_ERR("%s: Intel device address result failed (%02x)",
- hdev->name, bda->status);
- kfree_skb(skb);
- return -bt_to_errno(bda->status);
- }
/* For some Intel based controllers, the default Bluetooth device
* address 00:03:19:9E:8B:00 can be found. These controllers are
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 01d6da577eeb..b9a811900f6a 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1217,7 +1217,7 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
unsigned int reg, reg_start, reg_end;
enum rdwr_status stat;
u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr;
- u8 dump_num, idx, i, read_reg, doneflag = 0;
+ u8 dump_num = 0, idx, i, read_reg, doneflag = 0;
u32 memory_size, fw_dump_len = 0;
/* dump sdio register first */
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
new file mode 100644
index 000000000000..84288938f7f2
--- /dev/null
+++ b/drivers/bluetooth/btrtl.c
@@ -0,0 +1,390 @@
+/*
+ * Bluetooth support for Realtek devices
+ *
+ * Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btrtl.h"
+
+#define VERSION "0.1"
+
+#define RTL_EPATCH_SIGNATURE "Realtech"
+#define RTL_ROM_LMP_3499 0x3499
+#define RTL_ROM_LMP_8723A 0x1200
+#define RTL_ROM_LMP_8723B 0x8723
+#define RTL_ROM_LMP_8821A 0x8821
+#define RTL_ROM_LMP_8761A 0x8761
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+ struct rtl_rom_version_evt *rom_version;
+ struct sk_buff *skb;
+
+ /* Read RTL ROM version command */
+ skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Read ROM version failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*rom_version)) {
+ BT_ERR("%s: RTL version event length mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ rom_version = (struct rtl_rom_version_evt *)skb->data;
+ BT_INFO("%s: rom_version status=%x version=%x",
+ hdev->name, rom_version->status, rom_version->version);
+
+ *version = rom_version->version;
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
+ const struct firmware *fw,
+ unsigned char **_buf)
+{
+ const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+ struct rtl_epatch_header *epatch_info;
+ unsigned char *buf;
+ int i, ret, len;
+ size_t min_size;
+ u8 opcode, length, data, rom_version = 0;
+ int project_id = -1;
+ const unsigned char *fwptr, *chip_id_base;
+ const unsigned char *patch_length_base, *patch_offset_base;
+ u32 patch_offset = 0;
+ u16 patch_length, num_patches;
+ const u16 project_id_to_lmp_subver[] = {
+ RTL_ROM_LMP_8723A,
+ RTL_ROM_LMP_8723B,
+ RTL_ROM_LMP_8821A,
+ RTL_ROM_LMP_8761A
+ };
+
+ ret = rtl_read_rom_version(hdev, &rom_version);
+ if (ret)
+ return ret;
+
+ min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+ if (fw->size < min_size)
+ return -EINVAL;
+
+ fwptr = fw->data + fw->size - sizeof(extension_sig);
+ if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+ BT_ERR("%s: extension section signature mismatch", hdev->name);
+ return -EINVAL;
+ }
+
+ /* Loop from the end of the firmware parsing instructions, until
+ * we find an instruction that identifies the "project ID" for the
+ * hardware supported by this firwmare file.
+ * Once we have that, we double-check that that project_id is suitable
+ * for the hardware we are working with.
+ */
+ while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
+ opcode = *--fwptr;
+ length = *--fwptr;
+ data = *--fwptr;
+
+ BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+ if (opcode == 0xff) /* EOF */
+ break;
+
+ if (length == 0) {
+ BT_ERR("%s: found instruction with length 0",
+ hdev->name);
+ return -EINVAL;
+ }
+
+ if (opcode == 0 && length == 1) {
+ project_id = data;
+ break;
+ }
+
+ fwptr -= length;
+ }
+
+ if (project_id < 0) {
+ BT_ERR("%s: failed to find version instruction", hdev->name);
+ return -EINVAL;
+ }
+
+ if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
+ BT_ERR("%s: unknown project id %d", hdev->name, project_id);
+ return -EINVAL;
+ }
+
+ if (lmp_subver != project_id_to_lmp_subver[project_id]) {
+ BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
+ project_id_to_lmp_subver[project_id], lmp_subver);
+ return -EINVAL;
+ }
+
+ epatch_info = (struct rtl_epatch_header *)fw->data;
+ if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+ BT_ERR("%s: bad EPATCH signature", hdev->name);
+ return -EINVAL;
+ }
+
+ num_patches = le16_to_cpu(epatch_info->num_patches);
+ BT_DBG("fw_version=%x, num_patches=%d",
+ le32_to_cpu(epatch_info->fw_version), num_patches);
+
+ /* After the rtl_epatch_header there is a funky patch metadata section.
+ * Assuming 2 patches, the layout is:
+ * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+ *
+ * Find the right patch for this chip.
+ */
+ min_size += 8 * num_patches;
+ if (fw->size < min_size)
+ return -EINVAL;
+
+ chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
+ patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+ patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+ for (i = 0; i < num_patches; i++) {
+ u16 chip_id = get_unaligned_le16(chip_id_base +
+ (i * sizeof(u16)));
+ if (chip_id == rom_version + 1) {
+ patch_length = get_unaligned_le16(patch_length_base +
+ (i * sizeof(u16)));
+ patch_offset = get_unaligned_le32(patch_offset_base +
+ (i * sizeof(u32)));
+ break;
+ }
+ }
+
+ if (!patch_offset) {
+ BT_ERR("%s: didn't find patch for chip id %d",
+ hdev->name, rom_version);
+ return -EINVAL;
+ }
+
+ BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+ min_size = patch_offset + patch_length;
+ if (fw->size < min_size)
+ return -EINVAL;
+
+ /* Copy the firmware into a new buffer and write the version at
+ * the end.
+ */
+ len = patch_length;
+ buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+ *_buf = buf;
+ return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+ const unsigned char *data, int fw_len)
+{
+ struct rtl_download_cmd *dl_cmd;
+ int frag_num = fw_len / RTL_FRAG_LEN + 1;
+ int frag_len = RTL_FRAG_LEN;
+ int ret = 0;
+ int i;
+
+ dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+ if (!dl_cmd)
+ return -ENOMEM;
+
+ for (i = 0; i < frag_num; i++) {
+ struct sk_buff *skb;
+
+ BT_DBG("download fw (%d/%d)", i, frag_num);
+
+ dl_cmd->index = i;
+ if (i == (frag_num - 1)) {
+ dl_cmd->index |= 0x80; /* data end */
+ frag_len = fw_len % RTL_FRAG_LEN;
+ }
+ memcpy(dl_cmd->data, data, frag_len);
+
+ /* Send download command */
+ skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: download fw command failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ ret = -PTR_ERR(skb);
+ goto out;
+ }
+
+ if (skb->len != sizeof(struct rtl_download_response)) {
+ BT_ERR("%s: download fw event length mismatch",
+ hdev->name);
+ kfree_skb(skb);
+ ret = -EIO;
+ goto out;
+ }
+
+ kfree_skb(skb);
+ data += RTL_FRAG_LEN;
+ }
+
+out:
+ kfree(dl_cmd);
+ return ret;
+}
+
+static int btrtl_setup_rtl8723a(struct hci_dev *hdev)
+{
+ const struct firmware *fw;
+ int ret;
+
+ BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
+ ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev);
+ if (ret < 0) {
+ BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
+ return ret;
+ }
+
+ if (fw->size < 8) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Check that the firmware doesn't have the epatch signature
+ * (which is only for RTL8723B and newer).
+ */
+ if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
+ BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = rtl_download_firmware(hdev, fw->data, fw->size);
+
+out:
+ release_firmware(fw);
+ return ret;
+}
+
+static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
+ const char *fw_name)
+{
+ unsigned char *fw_data = NULL;
+ const struct firmware *fw;
+ int ret;
+
+ BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
+ ret = request_firmware(&fw, fw_name, &hdev->dev);
+ if (ret < 0) {
+ BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
+ return ret;
+ }
+
+ ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
+ if (ret < 0)
+ goto out;
+
+ ret = rtl_download_firmware(hdev, fw_data, ret);
+ kfree(fw_data);
+ if (ret < 0)
+ goto out;
+
+out:
+ release_firmware(fw);
+ return ret;
+}
+
+static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return skb;
+ }
+
+ if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+ BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
+ hdev->name);
+ kfree_skb(skb);
+ return ERR_PTR(-EIO);
+ }
+
+ return skb;
+}
+
+int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *resp;
+ u16 lmp_subver;
+
+ skb = btrtl_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return -PTR_ERR(skb);
+
+ resp = (struct hci_rp_read_local_version *)skb->data;
+ BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
+ "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
+ resp->lmp_ver, resp->lmp_subver);
+
+ lmp_subver = le16_to_cpu(resp->lmp_subver);
+ kfree_skb(skb);
+
+ /* Match a set of subver values that correspond to stock firmware,
+ * which is not compatible with standard btusb.
+ * If matched, upload an alternative firmware that does conform to
+ * standard btusb. Once that firmware is uploaded, the subver changes
+ * to a different value.
+ */
+ switch (lmp_subver) {
+ case RTL_ROM_LMP_8723A:
+ case RTL_ROM_LMP_3499:
+ return btrtl_setup_rtl8723a(hdev);
+ case RTL_ROM_LMP_8723B:
+ return btrtl_setup_rtl8723b(hdev, lmp_subver,
+ "rtl_bt/rtl8723b_fw.bin");
+ case RTL_ROM_LMP_8821A:
+ return btrtl_setup_rtl8723b(hdev, lmp_subver,
+ "rtl_bt/rtl8821a_fw.bin");
+ case RTL_ROM_LMP_8761A:
+ return btrtl_setup_rtl8723b(hdev, lmp_subver,
+ "rtl_bt/rtl8761a_fw.bin");
+ default:
+ BT_INFO("rtl: assuming no firmware upload needed.");
+ return 0;
+ }
+}
+EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
+
+MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
new file mode 100644
index 000000000000..38ffe4890cd1
--- /dev/null
+++ b/drivers/bluetooth/btrtl.h
@@ -0,0 +1,52 @@
+/*
+ * Bluetooth support for Realtek devices
+ *
+ * Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define RTL_FRAG_LEN 252
+
+struct rtl_download_cmd {
+ __u8 index;
+ __u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+ __u8 status;
+ __u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+ __u8 status;
+ __u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+ __u8 signature[8];
+ __le32 fw_version;
+ __le16 num_patches;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_RTL)
+
+int btrtl_setup_realtek(struct hci_dev *hdev);
+
+#else
+
+static inline int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3c10d4dfe9a7..b4cf8d9c9dac 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -31,13 +31,14 @@
#include "btintel.h"
#include "btbcm.h"
+#include "btrtl.h"
#define VERSION "0.8"
static bool disable_scofix;
static bool force_scofix;
-static bool reset = 1;
+static bool reset = true;
static struct usb_driver btusb_driver;
@@ -178,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -186,6 +188,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -211,6 +214,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -265,7 +269,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
- { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
+ { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
@@ -330,6 +334,7 @@ static const struct usb_device_id blacklist_table[] = {
#define BTUSB_FIRMWARE_LOADED 7
#define BTUSB_FIRMWARE_FAILED 8
#define BTUSB_BOOTING 9
+#define BTUSB_RESET_RESUME 10
struct btusb_data {
struct hci_dev *hdev;
@@ -1298,28 +1303,6 @@ static void btusb_waker(struct work_struct *work)
usb_autopm_put_interface(data->intf);
}
-static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev)
-{
- struct sk_buff *skb;
-
- skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
- HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return skb;
- }
-
- if (skb->len != sizeof(struct hci_rp_read_local_version)) {
- BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
- hdev->name);
- kfree_skb(skb);
- return ERR_PTR(-EIO);
- }
-
- return skb;
-}
-
static int btusb_setup_bcm92035(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -1340,408 +1323,40 @@ static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
struct sk_buff *skb;
- int ret;
BT_DBG("%s", hdev->name);
- skb = btusb_read_local_version(hdev);
- if (IS_ERR(skb))
- return -PTR_ERR(skb);
-
- rp = (struct hci_rp_read_local_version *)skb->data;
-
- if (!rp->status) {
- if (le16_to_cpu(rp->manufacturer) != 10) {
- /* Clear the reset quirk since this is not an actual
- * early Bluetooth 1.1 device from CSR.
- */
- clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
-
- /* These fake CSR controllers have all a broken
- * stored link key handling and so just disable it.
- */
- set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
- &hdev->quirks);
- }
- }
-
- ret = -bt_to_errno(rp->status);
-
- kfree_skb(skb);
-
- return ret;
-}
-
-#define RTL_FRAG_LEN 252
-
-struct rtl_download_cmd {
- __u8 index;
- __u8 data[RTL_FRAG_LEN];
-} __packed;
-
-struct rtl_download_response {
- __u8 status;
- __u8 index;
-} __packed;
-
-struct rtl_rom_version_evt {
- __u8 status;
- __u8 version;
-} __packed;
-
-struct rtl_epatch_header {
- __u8 signature[8];
- __le32 fw_version;
- __le16 num_patches;
-} __packed;
-
-#define RTL_EPATCH_SIGNATURE "Realtech"
-#define RTL_ROM_LMP_3499 0x3499
-#define RTL_ROM_LMP_8723A 0x1200
-#define RTL_ROM_LMP_8723B 0x8723
-#define RTL_ROM_LMP_8821A 0x8821
-#define RTL_ROM_LMP_8761A 0x8761
-
-static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
-{
- struct rtl_rom_version_evt *rom_version;
- struct sk_buff *skb;
- int ret;
-
- /* Read RTL ROM version command */
- skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+ HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
- BT_ERR("%s: Read ROM version failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return PTR_ERR(skb);
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
+ return err;
}
- if (skb->len != sizeof(*rom_version)) {
- BT_ERR("%s: RTL version event length mismatch", hdev->name);
+ if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+ BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
kfree_skb(skb);
return -EIO;
}
- rom_version = (struct rtl_rom_version_evt *)skb->data;
- BT_INFO("%s: rom_version status=%x version=%x",
- hdev->name, rom_version->status, rom_version->version);
-
- ret = rom_version->status;
- if (ret == 0)
- *version = rom_version->version;
-
- kfree_skb(skb);
- return ret;
-}
-
-static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
- const struct firmware *fw,
- unsigned char **_buf)
-{
- const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
- struct rtl_epatch_header *epatch_info;
- unsigned char *buf;
- int i, ret, len;
- size_t min_size;
- u8 opcode, length, data, rom_version = 0;
- int project_id = -1;
- const unsigned char *fwptr, *chip_id_base;
- const unsigned char *patch_length_base, *patch_offset_base;
- u32 patch_offset = 0;
- u16 patch_length, num_patches;
- const u16 project_id_to_lmp_subver[] = {
- RTL_ROM_LMP_8723A,
- RTL_ROM_LMP_8723B,
- RTL_ROM_LMP_8821A,
- RTL_ROM_LMP_8761A
- };
-
- ret = rtl_read_rom_version(hdev, &rom_version);
- if (ret)
- return -bt_to_errno(ret);
-
- min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
- if (fw->size < min_size)
- return -EINVAL;
-
- fwptr = fw->data + fw->size - sizeof(extension_sig);
- if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
- BT_ERR("%s: extension section signature mismatch", hdev->name);
- return -EINVAL;
- }
-
- /* Loop from the end of the firmware parsing instructions, until
- * we find an instruction that identifies the "project ID" for the
- * hardware supported by this firwmare file.
- * Once we have that, we double-check that that project_id is suitable
- * for the hardware we are working with.
- */
- while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
- opcode = *--fwptr;
- length = *--fwptr;
- data = *--fwptr;
-
- BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
-
- if (opcode == 0xff) /* EOF */
- break;
-
- if (length == 0) {
- BT_ERR("%s: found instruction with length 0",
- hdev->name);
- return -EINVAL;
- }
-
- if (opcode == 0 && length == 1) {
- project_id = data;
- break;
- }
-
- fwptr -= length;
- }
-
- if (project_id < 0) {
- BT_ERR("%s: failed to find version instruction", hdev->name);
- return -EINVAL;
- }
-
- if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
- BT_ERR("%s: unknown project id %d", hdev->name, project_id);
- return -EINVAL;
- }
-
- if (lmp_subver != project_id_to_lmp_subver[project_id]) {
- BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
- project_id_to_lmp_subver[project_id], lmp_subver);
- return -EINVAL;
- }
-
- epatch_info = (struct rtl_epatch_header *)fw->data;
- if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
- BT_ERR("%s: bad EPATCH signature", hdev->name);
- return -EINVAL;
- }
-
- num_patches = le16_to_cpu(epatch_info->num_patches);
- BT_DBG("fw_version=%x, num_patches=%d",
- le32_to_cpu(epatch_info->fw_version), num_patches);
-
- /* After the rtl_epatch_header there is a funky patch metadata section.
- * Assuming 2 patches, the layout is:
- * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
- *
- * Find the right patch for this chip.
- */
- min_size += 8 * num_patches;
- if (fw->size < min_size)
- return -EINVAL;
-
- chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
- patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
- patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
- for (i = 0; i < num_patches; i++) {
- u16 chip_id = get_unaligned_le16(chip_id_base +
- (i * sizeof(u16)));
- if (chip_id == rom_version + 1) {
- patch_length = get_unaligned_le16(patch_length_base +
- (i * sizeof(u16)));
- patch_offset = get_unaligned_le32(patch_offset_base +
- (i * sizeof(u32)));
- break;
- }
- }
-
- if (!patch_offset) {
- BT_ERR("%s: didn't find patch for chip id %d",
- hdev->name, rom_version);
- return -EINVAL;
- }
-
- BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
- min_size = patch_offset + patch_length;
- if (fw->size < min_size)
- return -EINVAL;
-
- /* Copy the firmware into a new buffer and write the version at
- * the end.
- */
- len = patch_length;
- buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
-
- *_buf = buf;
- return len;
-}
-
-static int rtl_download_firmware(struct hci_dev *hdev,
- const unsigned char *data, int fw_len)
-{
- struct rtl_download_cmd *dl_cmd;
- int frag_num = fw_len / RTL_FRAG_LEN + 1;
- int frag_len = RTL_FRAG_LEN;
- int ret = 0;
- int i;
-
- dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
- if (!dl_cmd)
- return -ENOMEM;
-
- for (i = 0; i < frag_num; i++) {
- struct rtl_download_response *dl_resp;
- struct sk_buff *skb;
-
- BT_DBG("download fw (%d/%d)", i, frag_num);
-
- dl_cmd->index = i;
- if (i == (frag_num - 1)) {
- dl_cmd->index |= 0x80; /* data end */
- frag_len = fw_len % RTL_FRAG_LEN;
- }
- memcpy(dl_cmd->data, data, frag_len);
-
- /* Send download command */
- skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
- HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: download fw command failed (%ld)",
- hdev->name, PTR_ERR(skb));
- ret = -PTR_ERR(skb);
- goto out;
- }
-
- if (skb->len != sizeof(*dl_resp)) {
- BT_ERR("%s: download fw event length mismatch",
- hdev->name);
- kfree_skb(skb);
- ret = -EIO;
- goto out;
- }
-
- dl_resp = (struct rtl_download_response *)skb->data;
- if (dl_resp->status != 0) {
- kfree_skb(skb);
- ret = bt_to_errno(dl_resp->status);
- goto out;
- }
-
- kfree_skb(skb);
- data += RTL_FRAG_LEN;
- }
-
-out:
- kfree(dl_cmd);
- return ret;
-}
-
-static int btusb_setup_rtl8723a(struct hci_dev *hdev)
-{
- struct btusb_data *data = dev_get_drvdata(&hdev->dev);
- struct usb_device *udev = interface_to_usbdev(data->intf);
- const struct firmware *fw;
- int ret;
-
- BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
- ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev);
- if (ret < 0) {
- BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
- return ret;
- }
-
- if (fw->size < 8) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Check that the firmware doesn't have the epatch signature
- * (which is only for RTL8723B and newer).
- */
- if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
- BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
- ret = -EINVAL;
- goto out;
- }
-
- ret = rtl_download_firmware(hdev, fw->data, fw->size);
-
-out:
- release_firmware(fw);
- return ret;
-}
+ rp = (struct hci_rp_read_local_version *)skb->data;
-static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
- const char *fw_name)
-{
- struct btusb_data *data = dev_get_drvdata(&hdev->dev);
- struct usb_device *udev = interface_to_usbdev(data->intf);
- unsigned char *fw_data = NULL;
- const struct firmware *fw;
- int ret;
+ if (le16_to_cpu(rp->manufacturer) != 10) {
+ /* Clear the reset quirk since this is not an actual
+ * early Bluetooth 1.1 device from CSR.
+ */
+ clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
- BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
- ret = request_firmware(&fw, fw_name, &udev->dev);
- if (ret < 0) {
- BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
- return ret;
+ /* These fake CSR controllers have all a broken
+ * stored link key handling and so just disable it.
+ */
+ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
}
- ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
- if (ret < 0)
- goto out;
-
- ret = rtl_download_firmware(hdev, fw_data, ret);
- kfree(fw_data);
- if (ret < 0)
- goto out;
-
-out:
- release_firmware(fw);
- return ret;
-}
-
-static int btusb_setup_realtek(struct hci_dev *hdev)
-{
- struct sk_buff *skb;
- struct hci_rp_read_local_version *resp;
- u16 lmp_subver;
-
- skb = btusb_read_local_version(hdev);
- if (IS_ERR(skb))
- return -PTR_ERR(skb);
-
- resp = (struct hci_rp_read_local_version *)skb->data;
- BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
- "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
- resp->lmp_ver, resp->lmp_subver);
-
- lmp_subver = le16_to_cpu(resp->lmp_subver);
kfree_skb(skb);
- /* Match a set of subver values that correspond to stock firmware,
- * which is not compatible with standard btusb.
- * If matched, upload an alternative firmware that does conform to
- * standard btusb. Once that firmware is uploaded, the subver changes
- * to a different value.
- */
- switch (lmp_subver) {
- case RTL_ROM_LMP_8723A:
- case RTL_ROM_LMP_3499:
- return btusb_setup_rtl8723a(hdev);
- case RTL_ROM_LMP_8723B:
- return btusb_setup_rtl8723b(hdev, lmp_subver,
- "rtl_bt/rtl8723b_fw.bin");
- case RTL_ROM_LMP_8821A:
- return btusb_setup_rtl8723b(hdev, lmp_subver,
- "rtl_bt/rtl8821a_fw.bin");
- case RTL_ROM_LMP_8761A:
- return btusb_setup_rtl8723b(hdev, lmp_subver,
- "rtl_bt/rtl8761a_fw.bin");
- default:
- BT_INFO("rtl: assuming no firmware upload needed.");
- return 0;
- }
+ return 0;
}
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
@@ -1951,12 +1566,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
}
ver = (struct intel_version *)skb->data;
- if (ver->status) {
- BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
- ver->status);
- kfree_skb(skb);
- return -bt_to_errno(ver->status);
- }
BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
hdev->name, ver->hw_platform, ver->hw_variant,
@@ -1990,6 +1599,8 @@ static int btusb_setup_intel(struct hci_dev *hdev)
}
fw_ptr = fw->data;
+ kfree_skb(skb);
+
/* This Intel specific command enables the manufacturer mode of the
* controller.
*
@@ -2004,15 +1615,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
return PTR_ERR(skb);
}
- if (skb->data[0]) {
- u8 evt_status = skb->data[0];
-
- BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
- hdev->name, evt_status);
- kfree_skb(skb);
- release_firmware(fw);
- return -bt_to_errno(evt_status);
- }
kfree_skb(skb);
disable_patch = 1;
@@ -2331,6 +1933,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
struct intel_boot_params *params;
const struct firmware *fw;
const u8 *fw_ptr;
+ u32 frag_len;
char fwname[64];
ktime_t calltime, delta, rettime;
unsigned long long duration;
@@ -2358,13 +1961,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
}
ver = (struct intel_version *)skb->data;
- if (ver->status) {
- BT_ERR("%s: Intel version command failure (%02x)",
- hdev->name, ver->status);
- err = -bt_to_errno(ver->status);
- kfree_skb(skb);
- return err;
- }
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
@@ -2439,13 +2035,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
}
params = (struct intel_boot_params *)skb->data;
- if (params->status) {
- BT_ERR("%s: Intel boot parameters command failure (%02x)",
- hdev->name, params->status);
- err = -bt_to_errno(params->status);
- kfree_skb(skb);
- return err;
- }
BT_INFO("%s: Device revision is %u", hdev->name,
le16_to_cpu(params->dev_revid));
@@ -2495,6 +2084,12 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+ /* Save the DDC file name for later use to apply once the firmware
+ * downloading is done.
+ */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+ le16_to_cpu(params->dev_revid));
+
kfree_skb(skb);
if (fw->size < 644) {
@@ -2537,24 +2132,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
}
fw_ptr = fw->data + 644;
+ frag_len = 0;
while (fw_ptr - fw->data < fw->size) {
- struct hci_command_hdr *cmd = (void *)fw_ptr;
- u8 cmd_len;
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
- cmd_len = sizeof(*cmd) + cmd->plen;
+ frag_len += sizeof(*cmd) + cmd->plen;
- /* Send each command from the firmware data buffer as
- * a single Data fragment.
+ /* The paramter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
*/
- err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
- if (err < 0) {
- BT_ERR("%s: Failed to send firmware data (%d)",
- hdev->name, err);
- goto done;
- }
+ if (!(frag_len % 4)) {
+ err = btusb_intel_secure_send(hdev, 0x01, frag_len,
+ fw_ptr);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware data (%d)",
+ hdev->name, err);
+ goto done;
+ }
- fw_ptr += cmd_len;
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
}
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
@@ -2647,6 +2251,43 @@ done:
clear_bit(BTUSB_BOOTLOADER, &data->flags);
+ /* Once the device is running in operational mode, it needs to apply
+ * the device configuration (DDC) parameters.
+ *
+ * The device can work without DDC parameters, so even if it fails
+ * to load the file, no need to fail the setup.
+ */
+ err = request_firmware_direct(&fw, fwname, &hdev->dev);
+ if (err < 0)
+ return 0;
+
+ BT_INFO("%s: Found Intel DDC parameters: %s", hdev->name, fwname);
+
+ fw_ptr = fw->data;
+
+ /* DDC file contains one or more DDC structure which has
+ * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Failed to send Intel_Write_DDC (%ld)",
+ hdev->name, PTR_ERR(skb));
+ release_firmware(fw);
+ return PTR_ERR(skb);
+ }
+
+ fw_ptr += cmd_plen;
+ kfree_skb(skb);
+ }
+
+ release_firmware(fw);
+
+ BT_INFO("%s: Applying Intel DDC parameters completed", hdev->name);
+
return 0;
}
@@ -2678,13 +2319,6 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
return;
}
- if (skb->data[0] != 0x00) {
- BT_ERR("%s: Exception info command failure (%02x)",
- hdev->name, skb->data[0]);
- kfree_skb(skb);
- return;
- }
-
BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
kfree_skb(skb);
@@ -2792,6 +2426,7 @@ struct qca_device_info {
static const struct qca_device_info qca_devices_table[] = {
{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+ { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
@@ -3175,8 +2810,17 @@ static int btusb_probe(struct usb_interface *intf,
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
}
- if (id->driver_info & BTUSB_REALTEK)
- hdev->setup = btusb_setup_realtek;
+#ifdef CONFIG_BT_HCIBTUSB_RTL
+ if (id->driver_info & BTUSB_REALTEK) {
+ hdev->setup = btrtl_setup_realtek;
+
+ /* Realtek devices lose their updated firmware over suspend,
+ * but the USB hub doesn't notice any status change.
+ * Explicitly request a device reset on resume.
+ */
+ set_bit(BTUSB_RESET_RESUME, &data->flags);
+ }
+#endif
if (id->driver_info & BTUSB_AMP) {
/* AMP controllers do not support SCO packets */
@@ -3308,6 +2952,14 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
btusb_stop_traffic(data);
usb_kill_anchored_urbs(&data->tx_anchor);
+ /* Optionally request a device reset on resume, but only when
+ * wakeups are disabled. If wakeups are enabled we assume the
+ * device will stay powered up throughout suspend.
+ */
+ if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
+ !device_may_wakeup(&data->udev->dev))
+ data->udev->reset_resume = 1;
+
return 0;
}
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 55c135b7757a..7a722df97343 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -22,7 +22,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
-#define DEBUG
+
#include <linux/platform_device.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index ec8fa0e0f036..6da5e4ca13ea 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -192,6 +192,7 @@ static int ath_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(ath->rx_skb)) {
int err = PTR_ERR(ath->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ ath->rx_skb = NULL;
return err;
}
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 1ec0b4a5ffa6..23523e140a9a 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -36,6 +37,55 @@ struct bcm_data {
struct sk_buff_head txq;
};
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct bcm_update_uart_baud_rate param;
+
+ if (speed > 3000000) {
+ struct bcm_write_uart_clock_setting clock;
+
+ clock.type = BCM_UART_CLOCK_48MHZ;
+
+ BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+
+ /* This Broadcom specific command changes the UART's controller
+ * clock for baud rate > 3000000.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write clock command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+ }
+
+ BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+
+ param.zero = cpu_to_le16(0);
+ param.baud_rate = cpu_to_le32(speed);
+
+ /* This Broadcom specific command changes the UART's controller baud
+ * rate.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
@@ -79,11 +129,62 @@ static int bcm_flush(struct hci_uart *hu)
static int bcm_setup(struct hci_uart *hu)
{
+ char fw_name[64];
+ const struct firmware *fw;
+ unsigned int speed;
+ int err;
+
BT_DBG("hu %p", hu);
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
- return btbcm_setup_patchram(hu->hdev);
+ err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
+ if (err)
+ return err;
+
+ err = request_firmware(&fw, fw_name, &hu->hdev->dev);
+ if (err < 0) {
+ BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+ return 0;
+ }
+
+ err = btbcm_patchram(hu->hdev, fw);
+ if (err) {
+ BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+ goto finalize;
+ }
+
+ /* Init speed if any */
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+ else
+ speed = 0;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (speed) {
+ err = bcm_set_baudrate(hu, speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, speed);
+ }
+
+finalize:
+ release_firmware(fw);
+
+ err = btbcm_finalize(hu->hdev);
+
+ return err;
}
static const struct h4_recv_pkt bcm_recv_pkts[] = {
@@ -104,6 +205,7 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(bcm->rx_skb)) {
int err = PTR_ERR(bcm->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ bcm->rx_skb = NULL;
return err;
}
@@ -133,10 +235,13 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
+ .init_speed = 115200,
+ .oper_speed = 4000000,
.open = bcm_open,
.close = bcm_close,
.flush = bcm_flush,
.setup = bcm_setup,
+ .set_baudrate = bcm_set_baudrate,
.recv = bcm_recv,
.enqueue = bcm_enqueue,
.dequeue = bcm_dequeue,
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index dc8e3d4356a0..d0b615a932d1 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -47,8 +47,8 @@
#include "hci_uart.h"
-static bool txcrc = 1;
-static bool hciextn = 1;
+static bool txcrc = true;
+static bool hciextn = true;
#define BCSP_TXWINSIZE 4
@@ -436,7 +436,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
break;
default:
memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, byte);
bcsp->rx_count--;
@@ -447,24 +447,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
switch (byte) {
case 0xdc:
memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xc0);
+ bcsp_crc_update(&bcsp->message_crc, 0xc0);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
case 0xdd:
memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xdb);
+ bcsp_crc_update(&bcsp->message_crc, 0xdb);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
default:
- BT_ERR ("Invalid byte %02x after esc byte", byte);
+ BT_ERR("Invalid byte %02x after esc byte", byte);
kfree_skb(bcsp->rx_skb);
bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -527,7 +527,7 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
hci_recv_frame(hu->hdev, bcsp->rx_skb);
} else {
- BT_ERR ("Packet for unknown channel (%u %s)",
+ BT_ERR("Packet for unknown channel (%u %s)",
bcsp->rx_skb->data[1] & 0x0f,
bcsp->rx_skb->data[0] & 0x80 ?
"reliable" : "unreliable");
@@ -587,7 +587,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
}
if (bcsp->rx_skb->data[0] & 0x80 /* reliable pkt */
&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
- BT_ERR ("Out-of-order packet arrived, got %u expected %u",
+ BT_ERR("Out-of-order packet arrived, got %u expected %u",
bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
kfree_skb(bcsp->rx_skb);
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index f7190f01e135..57faddc53645 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -133,6 +133,7 @@ static int h4_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(h4->rx_skb)) {
int err = PTR_ERR(h4->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ h4->rx_skb = NULL;
return err;
}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 5c9a73f02664..177dd69fdd95 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -40,6 +40,7 @@
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -265,11 +266,133 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+/* Flow control or un-flow control the device */
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+ int status;
+ unsigned int set = 0;
+ unsigned int clear = 0;
+
+ if (enable) {
+ /* Disable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Disabling hardware flow control: %s",
+ status ? "failed" : "success");
+
+ /* Clear RTS to prevent the device from sending */
+ /* Most UARTs need OUT2 to enable interrupts */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set &= ~(TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
+ } else {
+ /* Set RTS to allow the device to send again */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set |= (TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Setting RTS: %s", status ? "failed" : "success");
+
+ /* Re-enable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag |= CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Enabling hardware flow control: %s",
+ status ? "failed" : "success");
+ }
+}
+
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+ unsigned int oper_speed)
+{
+ hu->init_speed = init_speed;
+ hu->oper_speed = oper_speed;
+}
+
+void hci_uart_init_tty(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ /* Bring the UART into a known 8 bits no parity hw fc state */
+ ktermios = tty->termios;
+ ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
+ INLCR | IGNCR | ICRNL | IXON);
+ ktermios.c_oflag &= ~OPOST;
+ ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+ ktermios.c_cflag &= ~(CSIZE | PARENB);
+ ktermios.c_cflag |= CS8;
+ ktermios.c_cflag |= CRTSCTS;
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+}
+
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CBAUD;
+ tty_termios_encode_baud_rate(&ktermios, speed, speed);
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+
+ BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
+ tty->termios.c_ispeed, tty->termios.c_ospeed);
+}
+
static int hci_uart_setup(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct hci_rp_read_local_version *ver;
struct sk_buff *skb;
+ unsigned int speed;
+ int err;
+
+ /* Init speed if any */
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+ else
+ speed = 0;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (hu->proto->set_baudrate && speed) {
+ err = hu->proto->set_baudrate(hu, speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, speed);
+ }
if (hu->proto->setup)
return hu->proto->setup(hu);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 72120a5ba13c..ce9c670956f5 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -58,10 +58,13 @@ struct hci_uart;
struct hci_uart_proto {
unsigned int id;
const char *name;
+ unsigned int init_speed;
+ unsigned int oper_speed;
int (*open)(struct hci_uart *hu);
int (*close)(struct hci_uart *hu);
int (*flush)(struct hci_uart *hu);
int (*setup)(struct hci_uart *hu);
+ int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
int (*recv)(struct hci_uart *hu, const void *data, int len);
int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
struct sk_buff *(*dequeue)(struct hci_uart *hu);
@@ -82,6 +85,9 @@ struct hci_uart {
struct sk_buff *tx_skb;
unsigned long tx_state;
spinlock_t rx_lock;
+
+ unsigned int init_speed;
+ unsigned int oper_speed;
};
/* HCI_UART proto flag bits */
@@ -96,6 +102,11 @@ int hci_uart_register_proto(const struct hci_uart_proto *p);
int hci_uart_unregister_proto(const struct hci_uart_proto *p);
int hci_uart_tx_wakeup(struct hci_uart *hu);
int hci_uart_init_ready(struct hci_uart *hu);
+void hci_uart_init_tty(struct hci_uart *hu);
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+ unsigned int oper_speed);
#ifdef CONFIG_BT_HCIUART_H4
int h4_init(void);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 6653473f2757..78653db2ef2b 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -366,7 +366,7 @@ static const struct file_operations vhci_fops = {
.llseek = no_llseek,
};
-static struct miscdevice vhci_miscdev= {
+static struct miscdevice vhci_miscdev = {
.name = "vhci",
.fops = &vhci_fops,
.minor = VHCI_MINOR,