diff options
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r-- | drivers/cpufreq/Kconfig | 29 | ||||
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 27 | ||||
-rw-r--r-- | drivers/cpufreq/amd-pstate.c | 200 | ||||
-rw-r--r-- | drivers/cpufreq/brcmstb-avs-cpufreq.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq-dt-platdev.c | 1 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq-dt.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq.c | 50 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq_ondemand.c | 1 | ||||
-rw-r--r-- | drivers/cpufreq/freq_table.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/imx6q-cpufreq.c | 45 | ||||
-rw-r--r-- | drivers/cpufreq/intel_pstate.c | 46 | ||||
-rw-r--r-- | drivers/cpufreq/mediatek-cpufreq-hw.c | 19 | ||||
-rw-r--r-- | drivers/cpufreq/scmi-cpufreq.c | 46 |
13 files changed, 375 insertions, 95 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 35efb53d5492..94e55c40970a 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -302,4 +302,33 @@ config QORIQ_CPUFREQ which are capable of changing the CPU's frequency dynamically. endif + +config ACPI_CPPC_CPUFREQ + tristate "CPUFreq driver based on the ACPI CPPC spec" + depends on ACPI_PROCESSOR + depends on ARM || ARM64 || RISCV + select ACPI_CPPC_LIB + help + This adds a CPUFreq driver which uses CPPC methods + as described in the ACPIv5.1 spec. CPPC stands for + Collaborative Processor Performance Controls. It + is based on an abstract continuous scale of CPU + performance values which allows the remote power + processor to flexibly optimize for power and + performance. CPPC relies on power management firmware + support for its operation. + + If in doubt, say N. + +config ACPI_CPPC_CPUFREQ_FIE + bool "Frequency Invariance support for CPPC cpufreq driver" + depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY + depends on ARM || ARM64 || RISCV + default y + help + This extends frequency invariance support in the CPPC cpufreq driver, + by using CPPC delivered and reference performance counters. + + If in doubt, say N. + endmenu diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index f911606897b8..96b404ce829f 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -3,32 +3,6 @@ # ARM CPU Frequency scaling drivers # -config ACPI_CPPC_CPUFREQ - tristate "CPUFreq driver based on the ACPI CPPC spec" - depends on ACPI_PROCESSOR - select ACPI_CPPC_LIB - help - This adds a CPUFreq driver which uses CPPC methods - as described in the ACPIv5.1 spec. CPPC stands for - Collaborative Processor Performance Controls. It - is based on an abstract continuous scale of CPU - performance values which allows the remote power - processor to flexibly optimize for power and - performance. CPPC relies on power management firmware - support for its operation. - - If in doubt, say N. - -config ACPI_CPPC_CPUFREQ_FIE - bool "Frequency Invariance support for CPPC cpufreq driver" - depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY - default y - help - This extends frequency invariance support in the CPPC cpufreq driver, - by using CPPC delivered and reference performance counters. - - If in doubt, say N. - config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM tristate "Allwinner nvmem based SUN50I CPUFreq driver" depends on ARCH_SUNXI @@ -173,6 +147,7 @@ config ARM_QCOM_CPUFREQ_NVMEM config ARM_QCOM_CPUFREQ_HW tristate "QCOM CPUFreq HW driver" depends on ARCH_QCOM || COMPILE_TEST + depends on COMMON_CLK help Support for the CPUFreq HW driver. Some QCOM chipsets have a HW engine to offload the steps diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 1791d37fbc53..2015c9fcc3c9 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -37,6 +37,7 @@ #include <linux/uaccess.h> #include <linux/static_call.h> #include <linux/amd-pstate.h> +#include <linux/topology.h> #include <acpi/processor.h> #include <acpi/cppc_acpi.h> @@ -49,6 +50,7 @@ #define AMD_PSTATE_TRANSITION_LATENCY 20000 #define AMD_PSTATE_TRANSITION_DELAY 1000 +#define AMD_PSTATE_PREFCORE_THRESHOLD 166 /* * TODO: We need more time to fine tune processors with shared memory solution @@ -64,6 +66,7 @@ static struct cpufreq_driver amd_pstate_driver; static struct cpufreq_driver amd_pstate_epp_driver; static int cppc_state = AMD_PSTATE_UNDEFINED; static bool cppc_enabled; +static bool amd_pstate_prefcore = true; /* * AMD Energy Preference Performance (EPP) @@ -297,13 +300,14 @@ static int pstate_init_perf(struct amd_cpudata *cpudata) if (ret) return ret; - /* - * TODO: Introduce AMD specific power feature. - * - * CPPC entry doesn't indicate the highest performance in some ASICs. + /* For platforms that do not support the preferred core feature, the + * highest_pef may be configured with 166 or 255, to avoid max frequency + * calculated wrongly. we take the AMD_CPPC_HIGHEST_PERF(cap1) value as + * the default max perf. */ - highest_perf = amd_get_highest_perf(); - if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1)) + if (cpudata->hw_prefcore) + highest_perf = AMD_PSTATE_PREFCORE_THRESHOLD; + else highest_perf = AMD_CPPC_HIGHEST_PERF(cap1); WRITE_ONCE(cpudata->highest_perf, highest_perf); @@ -311,6 +315,7 @@ static int pstate_init_perf(struct amd_cpudata *cpudata) WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1)); WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1)); WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1)); + WRITE_ONCE(cpudata->prefcore_ranking, AMD_CPPC_HIGHEST_PERF(cap1)); WRITE_ONCE(cpudata->min_limit_perf, AMD_CPPC_LOWEST_PERF(cap1)); return 0; } @@ -324,8 +329,9 @@ static int cppc_init_perf(struct amd_cpudata *cpudata) if (ret) return ret; - highest_perf = amd_get_highest_perf(); - if (highest_perf > cppc_perf.highest_perf) + if (cpudata->hw_prefcore) + highest_perf = AMD_PSTATE_PREFCORE_THRESHOLD; + else highest_perf = cppc_perf.highest_perf; WRITE_ONCE(cpudata->highest_perf, highest_perf); @@ -334,6 +340,7 @@ static int cppc_init_perf(struct amd_cpudata *cpudata) WRITE_ONCE(cpudata->lowest_nonlinear_perf, cppc_perf.lowest_nonlinear_perf); WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf); + WRITE_ONCE(cpudata->prefcore_ranking, cppc_perf.highest_perf); WRITE_ONCE(cpudata->min_limit_perf, cppc_perf.lowest_perf); if (cppc_state == AMD_PSTATE_ACTIVE) @@ -477,12 +484,19 @@ static int amd_pstate_verify(struct cpufreq_policy_data *policy) static int amd_pstate_update_min_max_limit(struct cpufreq_policy *policy) { - u32 max_limit_perf, min_limit_perf; + u32 max_limit_perf, min_limit_perf, lowest_perf; struct amd_cpudata *cpudata = policy->driver_data; max_limit_perf = div_u64(policy->max * cpudata->highest_perf, cpudata->max_freq); min_limit_perf = div_u64(policy->min * cpudata->highest_perf, cpudata->max_freq); + lowest_perf = READ_ONCE(cpudata->lowest_perf); + if (min_limit_perf < lowest_perf) + min_limit_perf = lowest_perf; + + if (max_limit_perf < min_limit_perf) + max_limit_perf = min_limit_perf; + WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf); WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf); WRITE_ONCE(cpudata->max_limit_freq, policy->max); @@ -570,7 +584,7 @@ static void amd_pstate_adjust_perf(unsigned int cpu, if (target_perf < capacity) des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity); - min_perf = READ_ONCE(cpudata->highest_perf); + min_perf = READ_ONCE(cpudata->lowest_perf); if (_min_perf < capacity) min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity); @@ -706,6 +720,114 @@ static void amd_perf_ctl_reset(unsigned int cpu) wrmsrl_on_cpu(cpu, MSR_AMD_PERF_CTL, 0); } +/* + * Set amd-pstate preferred core enable can't be done directly from cpufreq callbacks + * due to locking, so queue the work for later. + */ +static void amd_pstste_sched_prefcore_workfn(struct work_struct *work) +{ + sched_set_itmt_support(); +} +static DECLARE_WORK(sched_prefcore_work, amd_pstste_sched_prefcore_workfn); + +/* + * Get the highest performance register value. + * @cpu: CPU from which to get highest performance. + * @highest_perf: Return address. + * + * Return: 0 for success, -EIO otherwise. + */ +static int amd_pstate_get_highest_perf(int cpu, u32 *highest_perf) +{ + int ret; + + if (boot_cpu_has(X86_FEATURE_CPPC)) { + u64 cap1; + + ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1); + if (ret) + return ret; + WRITE_ONCE(*highest_perf, AMD_CPPC_HIGHEST_PERF(cap1)); + } else { + u64 cppc_highest_perf; + + ret = cppc_get_highest_perf(cpu, &cppc_highest_perf); + if (ret) + return ret; + WRITE_ONCE(*highest_perf, cppc_highest_perf); + } + + return (ret); +} + +#define CPPC_MAX_PERF U8_MAX + +static void amd_pstate_init_prefcore(struct amd_cpudata *cpudata) +{ + int ret, prio; + u32 highest_perf; + + ret = amd_pstate_get_highest_perf(cpudata->cpu, &highest_perf); + if (ret) + return; + + cpudata->hw_prefcore = true; + /* check if CPPC preferred core feature is enabled*/ + if (highest_perf < CPPC_MAX_PERF) + prio = (int)highest_perf; + else { + pr_debug("AMD CPPC preferred core is unsupported!\n"); + cpudata->hw_prefcore = false; + return; + } + + if (!amd_pstate_prefcore) + return; + + /* + * The priorities can be set regardless of whether or not + * sched_set_itmt_support(true) has been called and it is valid to + * update them at any time after it has been called. + */ + sched_set_itmt_core_prio(prio, cpudata->cpu); + + schedule_work(&sched_prefcore_work); +} + +static void amd_pstate_update_limits(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct amd_cpudata *cpudata = policy->driver_data; + u32 prev_high = 0, cur_high = 0; + int ret; + bool highest_perf_changed = false; + + mutex_lock(&amd_pstate_driver_lock); + if ((!amd_pstate_prefcore) || (!cpudata->hw_prefcore)) + goto free_cpufreq_put; + + ret = amd_pstate_get_highest_perf(cpu, &cur_high); + if (ret) + goto free_cpufreq_put; + + prev_high = READ_ONCE(cpudata->prefcore_ranking); + if (prev_high != cur_high) { + highest_perf_changed = true; + WRITE_ONCE(cpudata->prefcore_ranking, cur_high); + + if (cur_high < CPPC_MAX_PERF) + sched_set_itmt_core_prio((int)cur_high, cpu); + } + +free_cpufreq_put: + cpufreq_cpu_put(policy); + + if (!highest_perf_changed) + cpufreq_update_policy(cpu); + + mutex_unlock(&amd_pstate_driver_lock); +} + static int amd_pstate_cpu_init(struct cpufreq_policy *policy) { int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret; @@ -727,6 +849,8 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy) cpudata->cpu = policy->cpu; + amd_pstate_init_prefcore(cpudata); + ret = amd_pstate_init_perf(cpudata); if (ret) goto free_cpudata1; @@ -877,6 +1001,28 @@ static ssize_t show_amd_pstate_highest_perf(struct cpufreq_policy *policy, return sysfs_emit(buf, "%u\n", perf); } +static ssize_t show_amd_pstate_prefcore_ranking(struct cpufreq_policy *policy, + char *buf) +{ + u32 perf; + struct amd_cpudata *cpudata = policy->driver_data; + + perf = READ_ONCE(cpudata->prefcore_ranking); + + return sysfs_emit(buf, "%u\n", perf); +} + +static ssize_t show_amd_pstate_hw_prefcore(struct cpufreq_policy *policy, + char *buf) +{ + bool hw_prefcore; + struct amd_cpudata *cpudata = policy->driver_data; + + hw_prefcore = READ_ONCE(cpudata->hw_prefcore); + + return sysfs_emit(buf, "%s\n", str_enabled_disabled(hw_prefcore)); +} + static ssize_t show_energy_performance_available_preferences( struct cpufreq_policy *policy, char *buf) { @@ -1074,18 +1220,29 @@ static ssize_t status_store(struct device *a, struct device_attribute *b, return ret < 0 ? ret : count; } +static ssize_t prefcore_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%s\n", str_enabled_disabled(amd_pstate_prefcore)); +} + cpufreq_freq_attr_ro(amd_pstate_max_freq); cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq); cpufreq_freq_attr_ro(amd_pstate_highest_perf); +cpufreq_freq_attr_ro(amd_pstate_prefcore_ranking); +cpufreq_freq_attr_ro(amd_pstate_hw_prefcore); cpufreq_freq_attr_rw(energy_performance_preference); cpufreq_freq_attr_ro(energy_performance_available_preferences); static DEVICE_ATTR_RW(status); +static DEVICE_ATTR_RO(prefcore); static struct freq_attr *amd_pstate_attr[] = { &amd_pstate_max_freq, &amd_pstate_lowest_nonlinear_freq, &amd_pstate_highest_perf, + &amd_pstate_prefcore_ranking, + &amd_pstate_hw_prefcore, NULL, }; @@ -1093,6 +1250,8 @@ static struct freq_attr *amd_pstate_epp_attr[] = { &amd_pstate_max_freq, &amd_pstate_lowest_nonlinear_freq, &amd_pstate_highest_perf, + &amd_pstate_prefcore_ranking, + &amd_pstate_hw_prefcore, &energy_performance_preference, &energy_performance_available_preferences, NULL, @@ -1100,6 +1259,7 @@ static struct freq_attr *amd_pstate_epp_attr[] = { static struct attribute *pstate_global_attributes[] = { &dev_attr_status.attr, + &dev_attr_prefcore.attr, NULL }; @@ -1151,6 +1311,8 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy) cpudata->cpu = policy->cpu; cpudata->epp_policy = 0; + amd_pstate_init_prefcore(cpudata); + ret = amd_pstate_init_perf(cpudata); if (ret) goto free_cpudata1; @@ -1232,6 +1394,12 @@ static void amd_pstate_epp_update_limit(struct cpufreq_policy *policy) max_limit_perf = div_u64(policy->max * cpudata->highest_perf, cpudata->max_freq); min_limit_perf = div_u64(policy->min * cpudata->highest_perf, cpudata->max_freq); + if (min_limit_perf < min_perf) + min_limit_perf = min_perf; + + if (max_limit_perf < min_limit_perf) + max_limit_perf = min_limit_perf; + WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf); WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf); @@ -1432,6 +1600,7 @@ static struct cpufreq_driver amd_pstate_driver = { .suspend = amd_pstate_cpu_suspend, .resume = amd_pstate_cpu_resume, .set_boost = amd_pstate_set_boost, + .update_limits = amd_pstate_update_limits, .name = "amd-pstate", .attr = amd_pstate_attr, }; @@ -1446,6 +1615,7 @@ static struct cpufreq_driver amd_pstate_epp_driver = { .online = amd_pstate_epp_cpu_online, .suspend = amd_pstate_epp_suspend, .resume = amd_pstate_epp_resume, + .update_limits = amd_pstate_update_limits, .name = "amd-pstate-epp", .attr = amd_pstate_epp_attr, }; @@ -1567,7 +1737,17 @@ static int __init amd_pstate_param(char *str) return amd_pstate_set_driver(mode_idx); } + +static int __init amd_prefcore_param(char *str) +{ + if (!strcmp(str, "disable")) + amd_pstate_prefcore = false; + + return 0; +} + early_param("amd_pstate", amd_pstate_param); +early_param("amd_prefcore", amd_prefcore_param); MODULE_AUTHOR("Huang Rui <ray.huang@amd.com>"); MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver"); diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c index 35fb3a559ea9..1a1857b0a6f4 100644 --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -481,6 +481,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv) static unsigned int brcm_avs_cpufreq_get(unsigned int cpu) { struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + if (!policy) + return 0; struct private_data *priv = policy->driver_data; cpufreq_cpu_put(policy); diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index bd1e1357cef8..b993a498084b 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -156,6 +156,7 @@ static const struct of_device_id blocklist[] __initconst = { { .compatible = "qcom,sc7280", }, { .compatible = "qcom,sc8180x", }, { .compatible = "qcom,sc8280xp", }, + { .compatible = "qcom,sdm670", }, { .compatible = "qcom,sdm845", }, { .compatible = "qcom,sdx75", }, { .compatible = "qcom,sm6115", }, diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 8bd6e5e8f121..2d83bbc65dd0 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -208,7 +208,7 @@ static int dt_cpufreq_early_init(struct device *dev, int cpu) if (!priv) return -ENOMEM; - if (!alloc_cpumask_var(&priv->cpus, GFP_KERNEL)) + if (!zalloc_cpumask_var(&priv->cpus, GFP_KERNEL)) return -ENOMEM; cpumask_set_cpu(cpu, priv->cpus); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 44db4f59c4cc..66e10a19d76a 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -576,17 +576,26 @@ unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy) latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC; if (latency) { + unsigned int max_delay_us = 2 * MSEC_PER_SEC; + + /* + * If the platform already has high transition_latency, use it + * as-is. + */ + if (latency > max_delay_us) + return latency; + /* - * For platforms that can change the frequency very fast (< 10 + * For platforms that can change the frequency very fast (< 2 * us), the above formula gives a decent transition delay. But * for platforms where transition_latency is in milliseconds, it * ends up giving unrealistic values. * - * Cap the default transition delay to 10 ms, which seems to be + * Cap the default transition delay to 2 ms, which seems to be * a reasonable amount of time after which we should reevaluate * the frequency. */ - return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000); + return min(latency * LATENCY_MULTIPLIER, max_delay_us); } return LATENCY_MULTIPLIER; @@ -644,14 +653,16 @@ static ssize_t store_local_boost(struct cpufreq_policy *policy, if (policy->boost_enabled == enable) return count; + policy->boost_enabled = enable; + cpus_read_lock(); ret = cpufreq_driver->set_boost(policy, enable); cpus_read_unlock(); - if (ret) + if (ret) { + policy->boost_enabled = !policy->boost_enabled; return ret; - - policy->boost_enabled = enable; + } return count; } @@ -1419,6 +1430,9 @@ static int cpufreq_online(unsigned int cpu) goto out_free_policy; } + /* Let the per-policy boost flag mirror the cpufreq_driver boost during init */ + policy->boost_enabled = cpufreq_boost_enabled() && policy_has_boost_freq(policy); + /* * The initialization has succeeded and the policy is online. * If there is a problem with its frequency table, take it @@ -1571,7 +1585,8 @@ static int cpufreq_online(unsigned int cpu) if (cpufreq_driver->ready) cpufreq_driver->ready(policy); - if (cpufreq_thermal_control_enabled(cpufreq_driver)) + /* Register cpufreq cooling only for a new policy */ + if (new_policy && cpufreq_thermal_control_enabled(cpufreq_driver)) policy->cdev = of_cpufreq_cooling_register(policy); pr_debug("initialization complete\n"); @@ -1655,11 +1670,6 @@ static void __cpufreq_offline(unsigned int cpu, struct cpufreq_policy *policy) else policy->last_policy = policy->policy; - if (cpufreq_thermal_control_enabled(cpufreq_driver)) { - cpufreq_cooling_unregister(policy->cdev); - policy->cdev = NULL; - } - if (has_target()) cpufreq_exit_governor(policy); @@ -1720,6 +1730,15 @@ static void cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) return; } + /* + * Unregister cpufreq cooling once all the CPUs of the policy are + * removed. + */ + if (cpufreq_thermal_control_enabled(cpufreq_driver)) { + cpufreq_cooling_unregister(policy->cdev); + policy->cdev = NULL; + } + /* We did light-weight exit earlier, do full tear down now */ if (cpufreq_driver->offline) cpufreq_driver->exit(policy); @@ -2755,11 +2774,12 @@ int cpufreq_boost_trigger_state(int state) cpus_read_lock(); for_each_active_policy(policy) { + policy->boost_enabled = state; ret = cpufreq_driver->set_boost(policy, state); - if (ret) + if (ret) { + policy->boost_enabled = !policy->boost_enabled; goto err_reset_state; - - policy->boost_enabled = state; + } } cpus_read_unlock(); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index c52d19d67557..a7c38b8b3e78 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -22,7 +22,6 @@ #define DEF_SAMPLING_DOWN_FACTOR (1) #define MAX_SAMPLING_DOWN_FACTOR (100000) #define MICRO_FREQUENCY_UP_THRESHOLD (95) -#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) #define MIN_FREQUENCY_UP_THRESHOLD (1) #define MAX_FREQUENCY_UP_THRESHOLD (100) diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index c4d4643b6ca6..c17dc51a5a02 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -40,7 +40,7 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, cpufreq_for_each_valid_entry(pos, table) { freq = pos->frequency; - if (!cpufreq_boost_enabled() + if ((!cpufreq_boost_enabled() || !policy->boost_enabled) && (pos->flags & CPUFREQ_BOOST_FREQ)) continue; diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 33728c242f66..c20d3ecc5a81 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -14,6 +14,8 @@ #include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #define PU_SOC_VOLTAGE_NORMAL 1250000 #define PU_SOC_VOLTAGE_HIGH 1275000 @@ -225,8 +227,6 @@ static void imx6x_disable_freq_in_opp(struct device *dev, unsigned long freq) static int imx6q_opp_check_speed_grading(struct device *dev) { - struct device_node *np; - void __iomem *base; u32 val; int ret; @@ -235,16 +235,11 @@ static int imx6q_opp_check_speed_grading(struct device *dev) if (ret) return ret; } else { - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp"); - if (!np) - return -ENOENT; + struct regmap *ocotp; - base = of_iomap(np, 0); - of_node_put(np); - if (!base) { - dev_err(dev, "failed to map ocotp\n"); - return -EFAULT; - } + ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6q-ocotp"); + if (IS_ERR(ocotp)) + return -ENOENT; /* * SPEED_GRADING[1:0] defines the max speed of ARM: @@ -254,8 +249,7 @@ static int imx6q_opp_check_speed_grading(struct device *dev) * 2b'00: 792000000Hz; * We need to set the max speed of ARM according to fuse map. */ - val = readl_relaxed(base + OCOTP_CFG3); - iounmap(base); + regmap_read(ocotp, OCOTP_CFG3, &val); } val >>= OCOTP_CFG3_SPEED_SHIFT; @@ -290,25 +284,16 @@ static int imx6ul_opp_check_speed_grading(struct device *dev) if (ret) return ret; } else { - struct device_node *np; - void __iomem *base; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp"); - if (!np) - np = of_find_compatible_node(NULL, NULL, - "fsl,imx6ull-ocotp"); - if (!np) - return -ENOENT; + struct regmap *ocotp; - base = of_iomap(np, 0); - of_node_put(np); - if (!base) { - dev_err(dev, "failed to map ocotp\n"); - return -EFAULT; - } + ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ul-ocotp"); + if (IS_ERR(ocotp)) + ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ull-ocotp"); + + if (IS_ERR(ocotp)) + return -ENOENT; - val = readl_relaxed(base + OCOTP_CFG3); - iounmap(base); + regmap_read(ocotp, OCOTP_CFG3, &val); } /* diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 79619227ea51..dbbf299f4219 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -25,6 +25,7 @@ #include <linux/acpi.h> #include <linux/vmalloc.h> #include <linux/pm_qos.h> +#include <linux/bitfield.h> #include <trace/events/power.h> #include <asm/cpu.h> @@ -201,8 +202,6 @@ struct global_params { * @prev_aperf: Last APERF value read from APERF MSR * @prev_mperf: Last MPERF value read from MPERF MSR * @prev_tsc: Last timestamp counter (TSC) value - * @prev_cummulative_iowait: IO Wait time difference from last and - * current sample * @sample: Storage for storing last Sample data * @min_perf_ratio: Minimum capacity in terms of PERF or HWP ratios * @max_perf_ratio: Maximum capacity in terms of PERF or HWP ratios @@ -241,7 +240,6 @@ struct cpudata { u64 prev_aperf; u64 prev_mperf; u64 prev_tsc; - u64 prev_cummulative_iowait; struct sample sample; int32_t min_perf_ratio; int32_t max_perf_ratio; @@ -3407,14 +3405,31 @@ static bool intel_pstate_hwp_is_enabled(void) return !!(value & 0x1); } -static const struct x86_cpu_id intel_epp_balance_perf[] = { +#define POWERSAVE_MASK GENMASK(7, 0) +#define BALANCE_POWER_MASK GENMASK(15, 8) +#define BALANCE_PERFORMANCE_MASK GENMASK(23, 16) +#define PERFORMANCE_MASK GENMASK(31, 24) + +#define HWP_SET_EPP_VALUES(powersave, balance_power, balance_perf, performance) \ + (FIELD_PREP_CONST(POWERSAVE_MASK, powersave) |\ + FIELD_PREP_CONST(BALANCE_POWER_MASK, balance_power) |\ + FIELD_PREP_CONST(BALANCE_PERFORMANCE_MASK, balance_perf) |\ + FIELD_PREP_CONST(PERFORMANCE_MASK, performance)) + +#define HWP_SET_DEF_BALANCE_PERF_EPP(balance_perf) \ + (HWP_SET_EPP_VALUES(HWP_EPP_POWERSAVE, HWP_EPP_BALANCE_POWERSAVE,\ + balance_perf, HWP_EPP_PERFORMANCE)) + +static const struct x86_cpu_id intel_epp_default[] = { /* * Set EPP value as 102, this is the max suggested EPP * which can result in one core turbo frequency for * AlderLake Mobile CPUs. */ - X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, 102), - X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, 32), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, HWP_SET_DEF_BALANCE_PERF_EPP(102)), + X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, HWP_SET_DEF_BALANCE_PERF_EPP(32)), + X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L, HWP_SET_EPP_VALUES(HWP_EPP_POWERSAVE, + HWP_EPP_BALANCE_POWERSAVE, 115, 16)), {} }; @@ -3512,11 +3527,24 @@ hwp_cpu_matched: intel_pstate_sysfs_expose_params(); if (hwp_active) { - const struct x86_cpu_id *id = x86_match_cpu(intel_epp_balance_perf); + const struct x86_cpu_id *id = x86_match_cpu(intel_epp_default); const struct x86_cpu_id *hybrid_id = x86_match_cpu(intel_hybrid_scaling_factor); - if (id) - epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = id->driver_data; + if (id) { + epp_values[EPP_INDEX_POWERSAVE] = + FIELD_GET(POWERSAVE_MASK, id->driver_data); + epp_values[EPP_INDEX_BALANCE_POWERSAVE] = + FIELD_GET(BALANCE_POWER_MASK, id->driver_data); + epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = + FIELD_GET(BALANCE_PERFORMANCE_MASK, id->driver_data); + epp_values[EPP_INDEX_PERFORMANCE] = + FIELD_GET(PERFORMANCE_MASK, id->driver_data); + pr_debug("Updated EPPs powersave:%x balanced power:%x balanced perf:%x performance:%x\n", + epp_values[EPP_INDEX_POWERSAVE], + epp_values[EPP_INDEX_BALANCE_POWERSAVE], + epp_values[EPP_INDEX_BALANCE_PERFORMANCE], + epp_values[EPP_INDEX_PERFORMANCE]); + } if (hybrid_id) { hybrid_scaling_factor = hybrid_id->driver_data; diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c index d46afb3c0092..8d097dcddda4 100644 --- a/drivers/cpufreq/mediatek-cpufreq-hw.c +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c @@ -13,6 +13,7 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #define LUT_MAX_ENTRIES 32U @@ -300,7 +301,23 @@ static struct cpufreq_driver cpufreq_mtk_hw_driver = { static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev) { const void *data; - int ret; + int ret, cpu; + struct device *cpu_dev; + struct regulator *cpu_reg; + + /* Make sure that all CPU supplies are available before proceeding. */ + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) + return dev_err_probe(&pdev->dev, -EPROBE_DEFER, + "Failed to get cpu%d device\n", cpu); + + cpu_reg = devm_regulator_get(cpu_dev, "cpu"); + if (IS_ERR(cpu_reg)) + return dev_err_probe(&pdev->dev, PTR_ERR(cpu_reg), + "CPU%d regulator get failed\n", cpu); + } + data = of_device_get_match_data(&pdev->dev); if (!data) diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index 4ee23f4ebf4a..3b4f6bfb2f4c 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -30,6 +30,7 @@ struct scmi_data { static struct scmi_protocol_handle *ph; static const struct scmi_perf_proto_ops *perf_ops; +static struct cpufreq_driver scmi_cpufreq_driver; static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) { @@ -144,6 +145,35 @@ scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power, return 0; } +static int +scmi_get_rate_limit(u32 domain, bool has_fast_switch) +{ + int ret, rate_limit; + + if (has_fast_switch) { + /* + * Fast channels are used whenever available, + * so use their rate_limit value if populated. + */ + ret = perf_ops->fast_switch_rate_limit(ph, domain, + &rate_limit); + if (!ret && rate_limit) + return rate_limit; + } + + ret = perf_ops->rate_limit_get(ph, domain, &rate_limit); + if (ret) + return 0; + + return rate_limit; +} + +static struct freq_attr *scmi_cpufreq_hw_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, + NULL, +}; + static int scmi_cpufreq_init(struct cpufreq_policy *policy) { int ret, nr_opp, domain; @@ -250,6 +280,20 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) policy->fast_switch_possible = perf_ops->fast_switch_possible(ph, domain); + policy->transition_delay_us = + scmi_get_rate_limit(domain, policy->fast_switch_possible); + + if (policy_has_boost_freq(policy)) { + ret = cpufreq_enable_boost_support(); + if (ret) { + dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); + goto out_free_opp; + } else { + scmi_cpufreq_hw_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; + scmi_cpufreq_driver.boost_enabled = true; + } + } + return 0; out_free_opp: @@ -308,7 +352,7 @@ static struct cpufreq_driver scmi_cpufreq_driver = { CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, - .attr = cpufreq_generic_attr, + .attr = scmi_cpufreq_hw_attr, .target_index = scmi_cpufreq_set_target, .fast_switch = scmi_cpufreq_fast_switch, .get = scmi_cpufreq_get_rate, |