diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dmub')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/dmub_srv.h | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 565 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_subvp_state.h | 183 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c | 8 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 31 |
6 files changed, 611 insertions, 185 deletions
diff --git a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h index 4585e0419da6..2d995c87fbb9 100644 --- a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h +++ b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h @@ -378,6 +378,7 @@ struct dmub_srv_hw_funcs { union dmub_fw_boot_status (*get_fw_status)(struct dmub_srv *dmub); + union dmub_fw_boot_options (*get_fw_boot_option)(struct dmub_srv *dmub); void (*set_gpint)(struct dmub_srv *dmub, union dmub_gpint_data_register reg); @@ -778,9 +779,15 @@ void dmub_flush_buffer_mem(const struct dmub_fb *fb); enum dmub_status dmub_srv_get_fw_boot_status(struct dmub_srv *dmub, union dmub_fw_boot_status *status); +enum dmub_status dmub_srv_get_fw_boot_option(struct dmub_srv *dmub, + union dmub_fw_boot_options *option); + enum dmub_status dmub_srv_cmd_with_reply_data(struct dmub_srv *dmub, union dmub_rb_cmd *cmd); +enum dmub_status dmub_srv_set_skip_panel_power_sequence(struct dmub_srv *dmub, + bool skip); + bool dmub_srv_get_outbox0_msg(struct dmub_srv *dmub, struct dmcub_trace_buf_entry *entry); bool dmub_srv_get_diagnostic_data(struct dmub_srv *dmub, struct dmub_diagnostic_data *diag_data); diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h index af1f50742371..7afa78b918b5 100644 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h @@ -170,6 +170,95 @@ extern "C" { #endif #pragma pack(push, 1) +#define ABM_NUM_OF_ACE_SEGMENTS 5 + +union abm_flags { + struct { + /** + * @abm_enabled: Indicates if ABM is enabled. + */ + unsigned int abm_enabled : 1; + + /** + * @disable_abm_requested: Indicates if driver has requested ABM to be disabled. + */ + unsigned int disable_abm_requested : 1; + + /** + * @disable_abm_immediately: Indicates if driver has requested ABM to be disabled + * immediately. + */ + unsigned int disable_abm_immediately : 1; + + /** + * @disable_abm_immediate_keep_gain: Indicates if driver has requested ABM + * to be disabled immediately and keep gain. + */ + unsigned int disable_abm_immediate_keep_gain : 1; + + /** + * @fractional_pwm: Indicates if fractional duty cycle for backlight PWM is enabled. + */ + unsigned int fractional_pwm : 1; + + /** + * @abm_gradual_bl_change: Indicates if algorithm has completed gradual adjustment + * of user backlight level. + */ + unsigned int abm_gradual_bl_change : 1; + } bitfields; + + unsigned int u32All; +}; + +struct abm_save_restore { + /** + * @flags: Misc. ABM flags. + */ + union abm_flags flags; + + /** + * @pause: true: pause ABM and get state + * false: unpause ABM after setting state + */ + uint32_t pause; + + /** + * @next_ace_slope: Next ACE slopes to be programmed in HW (u3.13) + */ + uint32_t next_ace_slope[ABM_NUM_OF_ACE_SEGMENTS]; + + /** + * @next_ace_thresh: Next ACE thresholds to be programmed in HW (u10.6) + */ + uint32_t next_ace_thresh[ABM_NUM_OF_ACE_SEGMENTS]; + + /** + * @next_ace_offset: Next ACE offsets to be programmed in HW (u10.6) + */ + uint32_t next_ace_offset[ABM_NUM_OF_ACE_SEGMENTS]; + + + /** + * @knee_threshold: Current x-position of ACE knee (u0.16). + */ + uint32_t knee_threshold; + /** + * @current_gain: Current backlight reduction (u16.16). + */ + uint32_t current_gain; + /** + * @curr_bl_level: Current actual backlight level converging to target backlight level. + */ + uint16_t curr_bl_level; + + /** + * @curr_user_bl_level: Current nominal backlight level converging to level requested by user. + */ + uint16_t curr_user_bl_level; + +}; + /** * union dmub_addr - DMUB physical/virtual 64-bit address. */ @@ -249,6 +338,112 @@ union dmub_psr_debug_flags { }; /** + * Flags that can be set by driver to change some Replay behaviour. + */ +union replay_debug_flags { + struct { + /** + * Enable visual confirm in FW. + */ + uint32_t visual_confirm : 1; + + /** + * @skip_crc: Set if need to skip CRC. + */ + uint32_t skip_crc : 1; + + /** + * @force_link_power_on: Force disable ALPM control + */ + uint32_t force_link_power_on : 1; + + /** + * @force_phy_power_on: Force phy power on + */ + uint32_t force_phy_power_on : 1; + + /** + * @timing_resync_disabled: Disabled Replay normal sleep mode timing resync + */ + uint32_t timing_resync_disabled : 1; + + /** + * @skip_crtc_disabled: CRTC disable skipped + */ + uint32_t skip_crtc_disabled : 1; + + /** + * @force_defer_one_frame_update: Force defer one frame update in ultra sleep mode + */ + uint32_t force_defer_one_frame_update : 1; + /** + * @disable_delay_alpm_on: Force disable delay alpm on + */ + uint32_t disable_delay_alpm_on : 1; + /** + * @disable_desync_error_check: Force disable desync error check + */ + uint32_t disable_desync_error_check : 1; + /** + * @disable_desync_error_check: Force disable desync error check + */ + uint32_t disable_dmub_save_restore : 1; + + uint32_t reserved : 22; + } bitfields; + + uint32_t u32All; +}; + +union replay_hw_flags { + struct { + /** + * @allow_alpm_fw_standby_mode: To indicate whether the + * ALPM FW standby mode is allowed + */ + uint32_t allow_alpm_fw_standby_mode : 1; + + /* + * @dsc_enable_status: DSC enable status in driver + */ + uint32_t dsc_enable_status : 1; + + /** + * @fec_enable_status: receive fec enable/disable status from driver + */ + uint32_t fec_enable_status : 1; + + /* + * @smu_optimizations_en: SMU power optimization. + * Only when active display is Replay capable and display enters Replay. + * Trigger interrupt to SMU to powerup/down. + */ + uint32_t smu_optimizations_en : 1; + + /** + * @otg_powered_down: Flag to keep track of OTG power state. + */ + uint32_t otg_powered_down : 1; + + /** + * @phy_power_state: Indicates current phy power state + */ + uint32_t phy_power_state : 1; + + /** + * @link_power_state: Indicates current link power state + */ + uint32_t link_power_state : 1; + /** + * Use TPS3 signal when restore main link. + */ + uint32_t force_wakeup_by_tps3 : 1; + } bitfields; + + uint32_t u32All; +}; + +/** * DMUB visual confirm color */ struct dmub_feature_caps { @@ -566,9 +761,42 @@ enum dmub_gpint_command { DMUB_GPINT__PSR_RESIDENCY = 9, /** + * DESC: Get REPLAY state from FW. + * RETURN: REPLAY state enum. This enum may need to be converted to the legacy REPLAY state value. + */ + DMUB_GPINT__GET_REPLAY_STATE = 13, + + /** + * DESC: Start REPLAY residency counter. Stop REPLAY resdiency counter and get value. + * ARGS: We can measure residency from various points. The argument will specify the residency mode. + * By default, it is measured from after we powerdown the PHY, to just before we powerup the PHY. + * RETURN: REPLAY residency in milli-percent. + */ + DMUB_GPINT__REPLAY_RESIDENCY = 14, + + + /** * DESC: Notifies DMCUB detection is done so detection required can be cleared. */ DMUB_GPINT__NOTIFY_DETECTION_DONE = 12, + /** + * DESC: Updates the trace buffer lower 32-bit mask. + * ARGS: The new mask + * RETURN: Lower 32-bit mask. + */ + DMUB_GPINT__UPDATE_TRACE_BUFFER_MASK = 101, + /** + * DESC: Updates the trace buffer lower 32-bit mask. + * ARGS: The new mask + * RETURN: Lower 32-bit mask. + */ + DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD0 = 102, + /** + * DESC: Updates the trace buffer mask bi0~bit15. + * ARGS: The new mask + * RETURN: Lower 32-bit mask. + */ + DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD1 = 103, }; /** @@ -764,6 +992,11 @@ enum dmub_cmd_type { */ /** + * Command type used for all REPLAY commands. + */ + DMUB_CMD__REPLAY = 83, + + /** * Command type used for all SECURE_DISPLAY commands. */ DMUB_CMD__SECURE_DISPLAY = 85, @@ -1911,6 +2144,10 @@ enum dmub_phy_fsm_state { DMUB_PHY_FSM_PLL_EN, DMUB_PHY_FSM_TX_EN, DMUB_PHY_FSM_FAST_LP, + DMUB_PHY_FSM_P2_PLL_OFF_CPM, + DMUB_PHY_FSM_P2_PLL_OFF_PG, + DMUB_PHY_FSM_P2_PLL_OFF, + DMUB_PHY_FSM_P2_PLL_ON, }; /** @@ -2496,6 +2733,272 @@ struct dmub_cmd_psr_set_power_opt_data { uint32_t power_opt; }; +#define REPLAY_RESIDENCY_MODE_SHIFT (0) +#define REPLAY_RESIDENCY_ENABLE_SHIFT (1) + +#define REPLAY_RESIDENCY_MODE_MASK (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) +# define REPLAY_RESIDENCY_MODE_PHY (0x0 << REPLAY_RESIDENCY_MODE_SHIFT) +# define REPLAY_RESIDENCY_MODE_ALPM (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) + +#define REPLAY_RESIDENCY_ENABLE_MASK (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) +# define REPLAY_RESIDENCY_DISABLE (0x0 << REPLAY_RESIDENCY_ENABLE_SHIFT) +# define REPLAY_RESIDENCY_ENABLE (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) + +enum replay_state { + REPLAY_STATE_0 = 0x0, + REPLAY_STATE_1 = 0x10, + REPLAY_STATE_1A = 0x11, + REPLAY_STATE_2 = 0x20, + REPLAY_STATE_3 = 0x30, + REPLAY_STATE_3INIT = 0x31, + REPLAY_STATE_4 = 0x40, + REPLAY_STATE_4A = 0x41, + REPLAY_STATE_4B = 0x42, + REPLAY_STATE_4C = 0x43, + REPLAY_STATE_4D = 0x44, + REPLAY_STATE_4B_LOCKED = 0x4A, + REPLAY_STATE_4C_UNLOCKED = 0x4B, + REPLAY_STATE_5 = 0x50, + REPLAY_STATE_5A = 0x51, + REPLAY_STATE_5B = 0x52, + REPLAY_STATE_5A_LOCKED = 0x5A, + REPLAY_STATE_5B_UNLOCKED = 0x5B, + REPLAY_STATE_6 = 0x60, + REPLAY_STATE_6A = 0x61, + REPLAY_STATE_6B = 0x62, + REPLAY_STATE_INVALID = 0xFF, +}; + +/** + * Replay command sub-types. + */ +enum dmub_cmd_replay_type { + /** + * Copy driver-calculated parameters to REPLAY state. + */ + DMUB_CMD__REPLAY_COPY_SETTINGS = 0, + /** + * Enable REPLAY. + */ + DMUB_CMD__REPLAY_ENABLE = 1, + /** + * Set Replay power option. + */ + DMUB_CMD__SET_REPLAY_POWER_OPT = 2, + /** + * Set coasting vtotal. + */ + DMUB_CMD__REPLAY_SET_COASTING_VTOTAL = 3, +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ +struct dmub_cmd_replay_copy_settings_data { + /** + * Flags that can be set by driver to change some replay behaviour. + */ + union replay_debug_flags debug; + + /** + * @flags: Flags used to determine feature functionality. + */ + union replay_hw_flags flags; + + /** + * DPP HW instance. + */ + uint8_t dpp_inst; + /** + * OTG HW instance. + */ + uint8_t otg_inst; + /** + * DIG FE HW instance. + */ + uint8_t digfe_inst; + /** + * DIG BE HW instance. + */ + uint8_t digbe_inst; + /** + * AUX HW instance. + */ + uint8_t aux_inst; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * @pixel_deviation_per_line: Indicate the maximum pixel deviation per line compare + * to Source timing when Sink maintains coasting vtotal during the Replay normal sleep mode + */ + uint8_t pixel_deviation_per_line; + /** + * @max_deviation_line: The max number of deviation line that can keep the timing + * synchronized between the Source and Sink during Replay normal sleep mode. + */ + uint8_t max_deviation_line; + /** + * Length of each horizontal line in ns. + */ + uint32_t line_time_in_ns; + /** + * PHY instance. + */ + uint8_t dpphy_inst; + /** + * Determines if SMU optimzations are enabled/disabled. + */ + uint8_t smu_optimizations_en; + /** + * Determines if timing sync are enabled/disabled. + */ + uint8_t replay_timing_sync_supported; + /* + * Use FSM state for Replay power up/down + */ + uint8_t use_phy_fsm; +}; + +/** + * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ +struct dmub_rb_cmd_replay_copy_settings { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ + struct dmub_cmd_replay_copy_settings_data replay_copy_settings_data; +}; + +/** + * Replay disable / enable state for dmub_rb_cmd_replay_enable_data.enable + */ +enum replay_enable { + /** + * Disable REPLAY. + */ + REPLAY_DISABLE = 0, + /** + * Enable REPLAY. + */ + REPLAY_ENABLE = 1, +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__REPLAY_ENABLE command. + */ +struct dmub_rb_cmd_replay_enable_data { + /** + * Replay enable or disable. + */ + uint8_t enable; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Phy state to enter. + * Values to use are defined in dmub_phy_fsm_state + */ + uint8_t phy_fsm_state; + /** + * Phy rate for DP - RBR/HBR/HBR2/HBR3. + * Set this using enum phy_link_rate. + * This does not support HDMI/DP2 for now. + */ + uint8_t phy_rate; +}; + +/** + * Definition of a DMUB_CMD__REPLAY_ENABLE command. + * Replay enable/disable is controlled using action in data. + */ +struct dmub_rb_cmd_replay_enable { + /** + * Command header. + */ + struct dmub_cmd_header header; + + struct dmub_rb_cmd_replay_enable_data data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__SET_REPLAY_POWER_OPT command. + */ +struct dmub_cmd_replay_set_power_opt_data { + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Explicit padding to 4 byte boundary. + */ + uint8_t pad[3]; + /** + * REPLAY power option + */ + uint32_t power_opt; +}; + +/** + * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. + */ +struct dmub_rb_cmd_replay_set_power_opt { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. + */ + struct dmub_cmd_replay_set_power_opt_data replay_set_power_opt_data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. + */ +struct dmub_cmd_replay_set_coasting_vtotal_data { + /** + * 16-bit value dicated by driver that indicates the coasting vtotal. + */ + uint16_t coasting_vtotal; + /** + * REPLAY control version. + */ + uint8_t cmd_version; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; +}; + +/** + * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. + */ +struct dmub_rb_cmd_replay_set_coasting_vtotal { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. + */ + struct dmub_cmd_replay_set_coasting_vtotal_data replay_set_coasting_vtotal_data; +}; + /** * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. */ @@ -2587,6 +3090,10 @@ enum hw_lock_client { */ HW_LOCK_CLIENT_PSR_SU = 1, /** + * Replay is the client of HW Lock Manager. + */ + HW_LOCK_CLIENT_REPLAY = 4, + /** * Invalid client. */ HW_LOCK_CLIENT_INVALID = 0xFFFFFFFF, @@ -2672,6 +3179,12 @@ enum dmub_cmd_abm_type { * unregister vertical interrupt after steady state is reached */ DMUB_CMD__ABM_PAUSE = 6, + + /** + * Save and Restore ABM state. On save we save parameters, and + * on restore we update state with passed in data. + */ + DMUB_CMD__ABM_SAVE_RESTORE = 7, }; /** @@ -3056,6 +3569,7 @@ struct dmub_cmd_abm_pause_data { uint8_t pad[1]; }; + /** * Definition of a DMUB_CMD__ABM_PAUSE command. */ @@ -3072,6 +3586,36 @@ struct dmub_rb_cmd_abm_pause { }; /** + * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. + */ +struct dmub_rb_cmd_abm_save_restore { + /** + * Command header. + */ + struct dmub_cmd_header header; + + /** + * OTG hw instance + */ + uint8_t otg_inst; + + /** + * Enable or disable ABM pause + */ + uint8_t freeze; + + /** + * Explicit padding to 4 byte boundary. + */ + uint8_t debug; + + /** + * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. + */ + struct dmub_cmd_abm_init_config_data abm_init_config_data; +}; + +/** * Data passed from driver to FW in a DMUB_CMD__QUERY_FEATURE_CAPS command. */ struct dmub_cmd_query_feature_caps_data { @@ -3509,6 +4053,11 @@ union dmub_rb_cmd { struct dmub_rb_cmd_abm_pause abm_pause; /** + * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. + */ + struct dmub_rb_cmd_abm_save_restore abm_save_restore; + + /** * Definition of a DMUB_CMD__DP_AUX_ACCESS command. */ struct dmub_rb_cmd_dp_aux_access dp_aux_access; @@ -3576,6 +4125,22 @@ union dmub_rb_cmd { * Definition of a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. */ struct dmub_rb_cmd_idle_opt_dcn_notify_idle idle_opt_notify_idle; + /* + * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ + struct dmub_rb_cmd_replay_copy_settings replay_copy_settings; + /** + * Definition of a DMUB_CMD__REPLAY_ENABLE command. + */ + struct dmub_rb_cmd_replay_enable replay_enable; + /** + * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. + */ + struct dmub_rb_cmd_replay_set_power_opt replay_set_power_opt; + /** + * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. + */ + struct dmub_rb_cmd_replay_set_coasting_vtotal replay_set_coasting_vtotal; }; /** diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_subvp_state.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_subvp_state.h deleted file mode 100644 index 21b02bad696f..000000000000 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_subvp_state.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Copyright 2019 Advanced Micro Devices, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: AMD - * - */ - -#ifndef DMUB_SUBVP_STATE_H -#define DMUB_SUBVP_STATE_H - -#include "dmub_cmd.h" - -#define DMUB_SUBVP_INST0 0 -#define DMUB_SUBVP_INST1 1 -#define SUBVP_MAX_WATERMARK 0xFFFF - -struct dmub_subvp_hubp_state { - uint32_t CURSOR0_0_CURSOR_POSITION; - uint32_t CURSOR0_0_CURSOR_HOT_SPOT; - uint32_t CURSOR0_0_CURSOR_DST_OFFSET; - uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS_HIGH; - uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS; - uint32_t CURSOR0_0_CURSOR_SIZE; - uint32_t CURSOR0_0_CURSOR_CONTROL; - uint32_t HUBPREQ0_CURSOR_SETTINGS; - uint32_t HUBPREQ0_DCSURF_SURFACE_EARLIEST_INUSE_HIGH; - uint32_t HUBPREQ0_DCSURF_SURFACE_EARLIEST_INUSE; - uint32_t HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH; - uint32_t HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS; - uint32_t HUBPREQ0_DCSURF_PRIMARY_META_SURFACE_ADDRESS; - uint32_t HUBPREQ0_DCSURF_PRIMARY_META_SURFACE_ADDRESS_HIGH; - uint32_t HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C; - uint32_t HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS_C; - uint32_t HUBPREQ0_DCSURF_PRIMARY_META_SURFACE_ADDRESS_HIGH_C; - uint32_t HUBPREQ0_DCSURF_PRIMARY_META_SURFACE_ADDRESS_C; -}; - -enum subvp_error_code { - DMUB_SUBVP_INVALID_STATE, - DMUB_SUBVP_INVALID_TRANSITION, -}; - -enum subvp_state { - DMUB_SUBVP_DISABLED, - DMUB_SUBVP_IDLE, - DMUB_SUBVP_TRY_ACQUIRE_LOCKS, - DMUB_SUBVP_WAIT_FOR_LOCKS, - DMUB_SUBVP_PRECONFIGURE, - DMUB_SUBVP_PREPARE, - DMUB_SUBVP_ENABLE, - DMUB_SUBVP_SWITCHING, - DMUB_SUBVP_END, - DMUB_SUBVP_RESTORE, -}; - -/* Defines information for SUBVP to handle vertical interrupts. */ -struct dmub_subvp_vertical_interrupt_event { - /** - * @inst: Hardware instance of vertical interrupt. - */ - uint8_t otg_inst; - - /** - * @pad: Align structure to 4 byte boundary. - */ - uint8_t pad[3]; - - enum subvp_state curr_state; -}; - -struct dmub_subvp_vertical_interrupt_state { - /** - * @events: Event list. - */ - struct dmub_subvp_vertical_interrupt_event events[DMUB_MAX_STREAMS]; -}; - -struct dmub_subvp_vline_interrupt_event { - - uint8_t hubp_inst; - uint8_t pad[3]; -}; - -struct dmub_subvp_vline_interrupt_state { - struct dmub_subvp_vline_interrupt_event events[DMUB_MAX_PLANES]; -}; - -struct dmub_subvp_interrupt_ctx { - struct dmub_subvp_vertical_interrupt_state vertical_int; - struct dmub_subvp_vline_interrupt_state vline_int; -}; - -struct dmub_subvp_pipe_state { - uint32_t pix_clk_100hz; - uint16_t main_vblank_start; - uint16_t main_vblank_end; - uint16_t mall_region_lines; - uint16_t prefetch_lines; - uint16_t prefetch_to_mall_start_lines; - uint16_t processing_delay_lines; - uint8_t main_pipe_index; - uint8_t phantom_pipe_index; - uint16_t htotal; // htotal for main / phantom pipe - uint16_t vtotal; - uint16_t optc_underflow_count; - uint16_t hubp_underflow_count; - uint8_t pad[2]; -}; - -/** - * struct dmub_subvp_vblank_drr_info - Store DRR state when handling - * SubVP + VBLANK with DRR multi-display case. - * - * The info stored in this struct is only valid if drr_in_use = 1. - */ -struct dmub_subvp_vblank_drr_info { - uint8_t drr_in_use; - uint8_t drr_window_size_ms; // DRR window size -- indicates largest VMIN/VMAX adjustment per frame - uint16_t min_vtotal_supported; // Min VTOTAL that supports switching in VBLANK - uint16_t max_vtotal_supported; // Max VTOTAL that can still support SubVP static scheduling requirements - uint16_t prev_vmin; // Store VMIN value before MCLK switch (used to restore after MCLK end) - uint16_t prev_vmax; // Store VMAX value before MCLK switch (used to restore after MCLK end) - uint8_t use_ramping; // Use ramping or not - uint8_t pad[1]; -}; - -struct dmub_subvp_vblank_pipe_info { - uint32_t pix_clk_100hz; - uint16_t vblank_start; - uint16_t vblank_end; - uint16_t vstartup_start; - uint16_t vtotal; - uint16_t htotal; - uint8_t pipe_index; - uint8_t pad[1]; - struct dmub_subvp_vblank_drr_info drr_info; // DRR considered as part of SubVP + VBLANK case -}; - -enum subvp_switch_type { - DMUB_SUBVP_ONLY, // Used for SubVP only, and SubVP + VACTIVE - DMUB_SUBVP_AND_SUBVP, // 2 SubVP displays - DMUB_SUBVP_AND_VBLANK, - DMUB_SUBVP_AND_FPO, -}; - -/* SubVP state. */ -struct dmub_subvp_state { - struct dmub_subvp_pipe_state pipe_state[DMUB_MAX_SUBVP_STREAMS]; - struct dmub_subvp_interrupt_ctx int_ctx; - struct dmub_subvp_vblank_pipe_info vblank_info; - enum subvp_state state; // current state - enum subvp_switch_type switch_type; // enum take up 4 bytes (?) - uint8_t mclk_pending; - uint8_t num_subvp_streams; - uint8_t vertical_int_margin_us; - uint8_t pstate_allow_width_us; - uint32_t subvp_mclk_switch_count; - uint32_t subvp_wait_lock_count; - uint32_t driver_wait_lock_count; - uint32_t subvp_vblank_frame_count; - uint16_t watermark_a_cache; - uint8_t pad[2]; -}; - -#endif /* _DMUB_SUBVP_STATE_H_ */ diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c index 5e952541e72d..094e9f864557 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c @@ -352,6 +352,14 @@ union dmub_fw_boot_status dmub_dcn31_get_fw_boot_status(struct dmub_srv *dmub) return status; } +union dmub_fw_boot_options dmub_dcn31_get_fw_boot_option(struct dmub_srv *dmub) +{ + union dmub_fw_boot_options option; + + option.all = REG_READ(DMCUB_SCRATCH14); + return option; +} + void dmub_dcn31_enable_dmub_boot_options(struct dmub_srv *dmub, const struct dmub_srv_hw_params *params) { union dmub_fw_boot_options boot_options = {0}; diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h index 89c5a948b67d..4d520a893c7b 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h @@ -239,6 +239,8 @@ void dmub_dcn31_skip_dmub_panel_power_sequence(struct dmub_srv *dmub, bool skip) union dmub_fw_boot_status dmub_dcn31_get_fw_boot_status(struct dmub_srv *dmub); +union dmub_fw_boot_options dmub_dcn31_get_fw_boot_option(struct dmub_srv *dmub); + void dmub_dcn31_setup_outbox0(struct dmub_srv *dmub, const struct dmub_region *outbox0); diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c index bdaf43892f47..93624ffe4eb8 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c @@ -255,6 +255,7 @@ static bool dmub_srv_hw_setup(struct dmub_srv *dmub, enum dmub_asic asic) funcs->get_gpint_response = dmub_dcn31_get_gpint_response; funcs->get_gpint_dataout = dmub_dcn31_get_gpint_dataout; funcs->get_fw_status = dmub_dcn31_get_fw_boot_status; + funcs->get_fw_boot_option = dmub_dcn31_get_fw_boot_option; funcs->enable_dmub_boot_options = dmub_dcn31_enable_dmub_boot_options; funcs->skip_dmub_panel_power_sequence = dmub_dcn31_skip_dmub_panel_power_sequence; //outbox0 call stacks @@ -639,11 +640,11 @@ enum dmub_status dmub_srv_hw_init(struct dmub_srv *dmub, if (dmub->hw_funcs.enable_dmub_boot_options) dmub->hw_funcs.enable_dmub_boot_options(dmub, params); - if (dmub->hw_funcs.skip_dmub_panel_power_sequence) + if (dmub->hw_funcs.skip_dmub_panel_power_sequence && !dmub->is_virtual) dmub->hw_funcs.skip_dmub_panel_power_sequence(dmub, params->skip_panel_power_sequence); - if (dmub->hw_funcs.reset_release) + if (dmub->hw_funcs.reset_release && !dmub->is_virtual) dmub->hw_funcs.reset_release(dmub); dmub->hw_init = true; @@ -846,6 +847,32 @@ enum dmub_status dmub_srv_get_fw_boot_status(struct dmub_srv *dmub, return DMUB_STATUS_OK; } +enum dmub_status dmub_srv_get_fw_boot_option(struct dmub_srv *dmub, + union dmub_fw_boot_options *option) +{ + option->all = 0; + + if (!dmub->sw_init) + return DMUB_STATUS_INVALID; + + if (dmub->hw_funcs.get_fw_boot_option) + *option = dmub->hw_funcs.get_fw_boot_option(dmub); + + return DMUB_STATUS_OK; +} + +enum dmub_status dmub_srv_set_skip_panel_power_sequence(struct dmub_srv *dmub, + bool skip) +{ + if (!dmub->sw_init) + return DMUB_STATUS_INVALID; + + if (dmub->hw_funcs.skip_dmub_panel_power_sequence && !dmub->is_virtual) + dmub->hw_funcs.skip_dmub_panel_power_sequence(dmub, skip); + + return DMUB_STATUS_OK; +} + enum dmub_status dmub_srv_cmd_with_reply_data(struct dmub_srv *dmub, union dmub_rb_cmd *cmd) { |