diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display')
14 files changed, 168 insertions, 66 deletions
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 8b4b186c57f5..7acd73e5004f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2479,20 +2479,25 @@ static void dm_gpureset_toggle_interrupts(struct amdgpu_device *adev, if (acrtc && state->stream_status[i].plane_count != 0) { irq_source = IRQ_TYPE_PFLIP + acrtc->otg_inst; rc = dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY; - DRM_DEBUG_VBL("crtc %d - vupdate irq %sabling: r=%d\n", - acrtc->crtc_id, enable ? "en" : "dis", rc); if (rc) DRM_WARN("Failed to %s pflip interrupts\n", enable ? "enable" : "disable"); if (enable) { - rc = amdgpu_dm_crtc_enable_vblank(&acrtc->base); - if (rc) - DRM_WARN("Failed to enable vblank interrupts\n"); - } else { - amdgpu_dm_crtc_disable_vblank(&acrtc->base); - } + if (amdgpu_dm_crtc_vrr_active(to_dm_crtc_state(acrtc->base.state))) + rc = amdgpu_dm_crtc_set_vupdate_irq(&acrtc->base, true); + } else + rc = amdgpu_dm_crtc_set_vupdate_irq(&acrtc->base, false); + + if (rc) + DRM_WARN("Failed to %sable vupdate interrupt\n", enable ? "en" : "dis"); + irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; + /* During gpu-reset we disable and then enable vblank irq, so + * don't use amdgpu_irq_get/put() to avoid refcount change. + */ + if (!dc_interrupt_set(adev->dm.dc, irq_source, enable)) + DRM_WARN("Failed to %sable vblank interrupt\n", enable ? "en" : "dis"); } } @@ -2852,7 +2857,7 @@ static int dm_resume(void *handle) * this is the case when traversing through already created * MST connectors, should be skipped */ - if (aconnector->dc_link->type == dc_connection_mst_branch) + if (aconnector && aconnector->mst_root) continue; mutex_lock(&aconnector->hpd_lock); @@ -6737,7 +6742,7 @@ static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder, int clock, bpp = 0; bool is_y420 = false; - if (!aconnector->mst_output_port || !aconnector->dc_sink) + if (!aconnector->mst_output_port) return 0; mst_port = aconnector->mst_output_port; @@ -7191,7 +7196,13 @@ static int amdgpu_dm_connector_get_modes(struct drm_connector *connector) drm_add_modes_noedid(connector, 1920, 1080); } else { amdgpu_dm_connector_ddc_get_modes(connector, edid); - amdgpu_dm_connector_add_common_modes(encoder, connector); + /* most eDP supports only timings from its edid, + * usually only detailed timings are available + * from eDP edid. timings which are not from edid + * may damage eDP + */ + if (connector->connector_type != DRM_MODE_CONNECTOR_eDP) + amdgpu_dm_connector_add_common_modes(encoder, connector); amdgpu_dm_connector_add_freesync_modes(connector, edid); } amdgpu_dm_fbc_init(connector); @@ -8193,6 +8204,12 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, if (acrtc_state->abm_level != dm_old_crtc_state->abm_level) bundle->stream_update.abm_level = &acrtc_state->abm_level; + mutex_lock(&dm->dc_lock); + if ((acrtc_state->update_type > UPDATE_TYPE_FAST) && + acrtc_state->stream->link->psr_settings.psr_allow_active) + amdgpu_dm_psr_disable(acrtc_state->stream); + mutex_unlock(&dm->dc_lock); + /* * If FreeSync state on the stream has changed then we need to * re-adjust the min/max bounds now that DC doesn't handle this @@ -8206,10 +8223,6 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); } mutex_lock(&dm->dc_lock); - if ((acrtc_state->update_type > UPDATE_TYPE_FAST) && - acrtc_state->stream->link->psr_settings.psr_allow_active) - amdgpu_dm_psr_disable(acrtc_state->stream); - update_planes_and_stream_adapter(dm->dc, acrtc_state->update_type, planes_count, diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c index e3762e806617..440fc0869a34 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c @@ -146,7 +146,6 @@ static void vblank_control_worker(struct work_struct *work) static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable) { - enum dc_irq_source irq_source; struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); struct amdgpu_device *adev = drm_to_adev(crtc->dev); struct dm_crtc_state *acrtc_state = to_dm_crtc_state(crtc->state); @@ -169,18 +168,9 @@ static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable) if (rc) return rc; - if (amdgpu_in_reset(adev)) { - irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; - /* During gpu-reset we disable and then enable vblank irq, so - * don't use amdgpu_irq_get/put() to avoid refcount change. - */ - if (!dc_interrupt_set(adev->dm.dc, irq_source, enable)) - rc = -EBUSY; - } else { - rc = (enable) - ? amdgpu_irq_get(adev, &adev->crtc_irq, acrtc->crtc_id) - : amdgpu_irq_put(adev, &adev->crtc_irq, acrtc->crtc_id); - } + rc = (enable) + ? amdgpu_irq_get(adev, &adev->crtc_irq, acrtc->crtc_id) + : amdgpu_irq_put(adev, &adev->crtc_irq, acrtc->crtc_id); if (rc) return rc; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 52564b93f7eb..7cde67b7f0c3 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1981,6 +1981,9 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c return result; } +static bool commit_minimal_transition_state(struct dc *dc, + struct dc_state *transition_base_context); + /** * dc_commit_streams - Commit current stream state * @@ -2002,6 +2005,8 @@ enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context; enum dc_status res = DC_OK; struct dc_validation_set set[MAX_STREAMS] = {0}; + struct pipe_ctx *pipe; + bool handle_exit_odm2to1 = false; if (dc->ctx->dce_environment == DCE_ENV_VIRTUAL_HW) return res; @@ -2026,6 +2031,22 @@ enum dc_status dc_commit_streams(struct dc *dc, } } + /* Check for case where we are going from odm 2:1 to max + * pipe scenario. For these cases, we will call + * commit_minimal_transition_state() to exit out of odm 2:1 + * first before processing new streams + */ + if (stream_count == dc->res_pool->pipe_count) { + for (i = 0; i < dc->res_pool->pipe_count; i++) { + pipe = &dc->current_state->res_ctx.pipe_ctx[i]; + if (pipe->next_odm_pipe) + handle_exit_odm2to1 = true; + } + } + + if (handle_exit_odm2to1) + res = commit_minimal_transition_state(dc, dc->current_state); + context = dc_create_state(dc); if (!context) goto context_alloc_fail; @@ -3872,6 +3893,7 @@ static bool commit_minimal_transition_state(struct dc *dc, unsigned int i, j; unsigned int pipe_in_use = 0; bool subvp_in_use = false; + bool odm_in_use = false; if (!transition_context) return false; @@ -3900,6 +3922,18 @@ static bool commit_minimal_transition_state(struct dc *dc, } } + /* If ODM is enabled and we are adding or removing planes from any ODM + * pipe, we must use the minimal transition. + */ + for (i = 0; i < dc->res_pool->pipe_count; i++) { + struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i]; + + if (pipe->stream && pipe->next_odm_pipe) { + odm_in_use = true; + break; + } + } + /* When the OS add a new surface if we have been used all of pipes with odm combine * and mpc split feature, it need use commit_minimal_transition_state to transition safely. * After OS exit MPO, it will back to use odm and mpc split with all of pipes, we need @@ -3908,7 +3942,7 @@ static bool commit_minimal_transition_state(struct dc *dc, * Reduce the scenarios to use dc_commit_state_no_check in the stage of flip. Especially * enter/exit MPO when DCN still have enough resources. */ - if (pipe_in_use != dc->res_pool->pipe_count && !subvp_in_use) { + if (pipe_in_use != dc->res_pool->pipe_count && !subvp_in_use && !odm_in_use) { dc_release_state(transition_context); return true; } diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 117d80cb36fb..fe1551393b26 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1446,6 +1446,26 @@ static int acquire_first_split_pipe( split_pipe->stream = stream; return i; + } else if (split_pipe->prev_odm_pipe && + split_pipe->prev_odm_pipe->plane_state == split_pipe->plane_state) { + split_pipe->prev_odm_pipe->next_odm_pipe = split_pipe->next_odm_pipe; + if (split_pipe->next_odm_pipe) + split_pipe->next_odm_pipe->prev_odm_pipe = split_pipe->prev_odm_pipe; + + if (split_pipe->prev_odm_pipe->plane_state) + resource_build_scaling_params(split_pipe->prev_odm_pipe); + + memset(split_pipe, 0, sizeof(*split_pipe)); + split_pipe->stream_res.tg = pool->timing_generators[i]; + split_pipe->plane_res.hubp = pool->hubps[i]; + split_pipe->plane_res.ipp = pool->ipps[i]; + split_pipe->plane_res.dpp = pool->dpps[i]; + split_pipe->stream_res.opp = pool->opps[i]; + split_pipe->plane_res.mpcc_inst = pool->dpps[i]->inst; + split_pipe->pipe_idx = i; + + split_pipe->stream = stream; + return i; } } return -1; diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index 422fbf79da64..5403e9399a46 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -2113,15 +2113,6 @@ void dcn20_optimize_bandwidth( if (hubbub->funcs->program_compbuf_size) hubbub->funcs->program_compbuf_size(hubbub, context->bw_ctx.bw.dcn.compbuf_size_kb, true); - if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) { - dc_dmub_srv_p_state_delegate(dc, - true, context); - context->bw_ctx.bw.dcn.clk.p_state_change_support = true; - dc->clk_mgr->clks.fw_based_mclk_switching = true; - } else { - dc->clk_mgr->clks.fw_based_mclk_switching = false; - } - dc->clk_mgr->funcs->update_clocks( dc->clk_mgr, context, diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c index 8263a07f265f..32121db2851e 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c @@ -983,36 +983,13 @@ void dcn30_set_disp_pattern_generator(const struct dc *dc, } void dcn30_prepare_bandwidth(struct dc *dc, - struct dc_state *context) + struct dc_state *context) { - bool p_state_change_support = context->bw_ctx.bw.dcn.clk.p_state_change_support; - /* Any transition into an FPO config should disable MCLK switching first to avoid - * driver and FW P-State synchronization issues. - */ - if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) { - dc->optimized_required = true; - context->bw_ctx.bw.dcn.clk.p_state_change_support = false; - } - if (dc->clk_mgr->dc_mode_softmax_enabled) if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 && context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000) dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz); dcn20_prepare_bandwidth(dc, context); - /* - * enabled -> enabled: do not disable - * enabled -> disabled: disable - * disabled -> enabled: don't care - * disabled -> disabled: don't care - */ - if (!context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) - dc_dmub_srv_p_state_delegate(dc, false, context); - - if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) { - /* After disabling P-State, restore the original value to ensure we get the correct P-State - * on the next optimize. */ - context->bw_ctx.bw.dcn.clk.p_state_change_support = p_state_change_support; - } } diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c index 40c488b26901..cc3fe9cac5b5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c @@ -423,3 +423,68 @@ void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool PERF_TRACE(); } +static void apply_symclk_on_tx_off_wa(struct dc_link *link) +{ + /* There are use cases where SYMCLK is referenced by OTG. For instance + * for TMDS signal, OTG relies SYMCLK even if TX video output is off. + * However current link interface will power off PHY when disabling link + * output. This will turn off SYMCLK generated by PHY. The workaround is + * to identify such case where SYMCLK is still in use by OTG when we + * power off PHY. When this is detected, we will temporarily power PHY + * back on and move PHY's SYMCLK state to SYMCLK_ON_TX_OFF by calling + * program_pix_clk interface. When OTG is disabled, we will then power + * off PHY by calling disable link output again. + * + * In future dcn generations, we plan to rework transmitter control + * interface so that we could have an option to set SYMCLK ON TX OFF + * state in one step without this workaround + */ + + struct dc *dc = link->ctx->dc; + struct pipe_ctx *pipe_ctx = NULL; + uint8_t i; + + if (link->phy_state.symclk_ref_cnts.otg > 0) { + for (i = 0; i < MAX_PIPES; i++) { + pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; + if (pipe_ctx->stream && pipe_ctx->stream->link == link && pipe_ctx->top_pipe == NULL) { + pipe_ctx->clock_source->funcs->program_pix_clk( + pipe_ctx->clock_source, + &pipe_ctx->stream_res.pix_clk_params, + dc->link_srv->dp_get_encoding_format( + &pipe_ctx->link_config.dp_link_settings), + &pipe_ctx->pll_settings); + link->phy_state.symclk_state = SYMCLK_ON_TX_OFF; + break; + } + } + } +} + +void dcn314_disable_link_output(struct dc_link *link, + const struct link_resource *link_res, + enum signal_type signal) +{ + struct dc *dc = link->ctx->dc; + const struct link_hwss *link_hwss = get_link_hwss(link, link_res); + struct dmcu *dmcu = dc->res_pool->dmcu; + + if (signal == SIGNAL_TYPE_EDP && + link->dc->hwss.edp_backlight_control) + link->dc->hwss.edp_backlight_control(link, false); + else if (dmcu != NULL && dmcu->funcs->lock_phy) + dmcu->funcs->lock_phy(dmcu); + + link_hwss->disable_link_output(link, link_res, signal); + link->phy_state.symclk_state = SYMCLK_OFF_TX_OFF; + /* + * Add the logic to extract BOTH power up and power down sequences + * from enable/disable link output and only call edp panel control + * in enable_link_dp and disable_link_dp once. + */ + if (dmcu != NULL && dmcu->funcs->lock_phy) + dmcu->funcs->unlock_phy(dmcu); + dc->link_srv->dp_trace_source_sequence(link, DPCD_SOURCE_SEQ_AFTER_DISABLE_LINK_PHY); + + apply_symclk_on_tx_off_wa(link); +} diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h index c786d5e6a428..6d0b62503caa 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h @@ -45,4 +45,6 @@ void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool void dcn314_dpp_root_clock_control(struct dce_hwseq *hws, unsigned int dpp_inst, bool clock_on); +void dcn314_disable_link_output(struct dc_link *link, const struct link_resource *link_res, enum signal_type signal); + #endif /* __DC_HWSS_DCN314_H__ */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c index 5267e901a35c..a588f46b166f 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c +++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c @@ -105,7 +105,7 @@ static const struct hw_sequencer_funcs dcn314_funcs = { .enable_lvds_link_output = dce110_enable_lvds_link_output, .enable_tmds_link_output = dce110_enable_tmds_link_output, .enable_dp_link_output = dce110_enable_dp_link_output, - .disable_link_output = dce110_disable_link_output, + .disable_link_output = dcn314_disable_link_output, .z10_restore = dcn31_z10_restore, .z10_save_init = dcn31_z10_save_init, .set_disp_pattern_generator = dcn30_set_disp_pattern_generator, diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 47beb4ea779d..0c4c3208def1 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -138,7 +138,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_2_soc = { .urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096, .urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096, .urgent_out_of_order_return_per_channel_vm_only_bytes = 4096, - .pct_ideal_sdp_bw_after_urgent = 100.0, + .pct_ideal_sdp_bw_after_urgent = 90.0, .pct_ideal_fabric_bw_after_urgent = 67.0, .pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 20.0, .pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0, // N/A, for now keep as is until DML implemented diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c index 13c7e7394b1c..d75248b6cae9 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c @@ -810,7 +810,8 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman v->SwathHeightY[k], v->SwathHeightC[k], TWait, - v->DRAMSpeedPerState[mode_lib->vba.VoltageLevel] <= MEM_STROBE_FREQ_MHZ ? + (v->DRAMSpeedPerState[mode_lib->vba.VoltageLevel] <= MEM_STROBE_FREQ_MHZ || + v->DCFCLKPerState[mode_lib->vba.VoltageLevel] <= MIN_DCFCLK_FREQ_MHZ) ? mode_lib->vba.ip.min_prefetch_in_strobe_us : 0, /* Output */ &v->DSTXAfterScaler[k], @@ -3310,7 +3311,7 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l v->swath_width_chroma_ub_this_state[k], v->SwathHeightYThisState[k], v->SwathHeightCThisState[k], v->TWait, - v->DRAMSpeedPerState[i] <= MEM_STROBE_FREQ_MHZ ? + (v->DRAMSpeedPerState[i] <= MEM_STROBE_FREQ_MHZ || v->DCFCLKState[i][j] <= MIN_DCFCLK_FREQ_MHZ) ? mode_lib->vba.ip.min_prefetch_in_strobe_us : 0, /* Output */ diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.h b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.h index 500b3dd6052d..d98e36a9a09c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.h +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.h @@ -53,6 +53,7 @@ #define BPP_BLENDED_PIPE 0xffffffff #define MEM_STROBE_FREQ_MHZ 1600 +#define MIN_DCFCLK_FREQ_MHZ 200 #define MEM_STROBE_MAX_DELIVERY_TIME_US 60.0 struct display_mode_lib; diff --git a/drivers/gpu/drm/amd/display/dc/link/link_detection.c b/drivers/gpu/drm/amd/display/dc/link/link_detection.c index a131e30fd7d6..d471d58aba92 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_detection.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_detection.c @@ -980,6 +980,11 @@ static bool detect_link_and_local_sink(struct dc_link *link, (link->dpcd_caps.dongle_type != DISPLAY_DONGLE_DP_HDMI_CONVERTER)) converter_disable_audio = true; + + /* limited link rate to HBR3 for DPIA until we implement USB4 V2 */ + if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && + link->reported_link_cap.link_rate > LINK_RATE_HIGH3) + link->reported_link_cap.link_rate = LINK_RATE_HIGH3; break; } diff --git a/drivers/gpu/drm/amd/display/dc/link/link_validation.c b/drivers/gpu/drm/amd/display/dc/link/link_validation.c index d4b7da526f0a..e8b2fc4002a5 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_validation.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_validation.c @@ -359,5 +359,8 @@ bool link_validate_dpia_bandwidth(const struct dc_stream_state *stream, const un link[i] = stream[i].link; bw_needed[i] = dc_bandwidth_in_kbps_from_timing(&stream[i].timing); } + + ret = dpia_validate_usb4_bw(link, bw_needed, num_streams); + return ret; } |