diff options
Diffstat (limited to 'drivers/gpu/drm/bridge')
| -rw-r--r-- | drivers/gpu/drm/bridge/parade-ps8640.c | 25 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 |
3 files changed, 28 insertions, 7 deletions
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index d7483c13c569..083337a27966 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -105,6 +105,7 @@ struct ps8640 { struct gpio_desc *gpio_powerdown; struct device_link *link; bool pre_enabled; + bool need_post_hpd_delay; }; static const struct regmap_config ps8640_regmap_config[] = { @@ -173,14 +174,31 @@ static int _ps8640_wait_hpd_asserted(struct ps8640 *ps_bridge, unsigned long wai { struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL]; int status; + int ret; /* * Apparently something about the firmware in the chip signals that * HPD goes high by reporting GPIO9 as high (even though HPD isn't * actually connected to GPIO9). */ - return regmap_read_poll_timeout(map, PAGE2_GPIO_H, status, - status & PS_GPIO9, wait_us / 10, wait_us); + ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status, + status & PS_GPIO9, wait_us / 10, wait_us); + + /* + * The first time we see HPD go high after a reset we delay an extra + * 50 ms. The best guess is that the MCU is doing "stuff" during this + * time (maybe talking to the panel) and we don't want to interrupt it. + * + * No locking is done around "need_post_hpd_delay". If we're here we + * know we're holding a PM Runtime reference and the only other place + * that touches this is PM Runtime resume. + */ + if (!ret && ps_bridge->need_post_hpd_delay) { + ps_bridge->need_post_hpd_delay = false; + msleep(50); + } + + return ret; } static int ps8640_wait_hpd_asserted(struct drm_dp_aux *aux, unsigned long wait_us) @@ -381,6 +399,9 @@ static int __maybe_unused ps8640_resume(struct device *dev) msleep(50); gpiod_set_value(ps_bridge->gpio_reset, 0); + /* We just reset things, so we need a delay after the first HPD */ + ps_bridge->need_post_hpd_delay = true; + /* * Mystery 200 ms delay for the "MCU to be ready". It's unclear if * this is truly necessary since the MCU will already signal that diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 40d8ca37f5bc..aa51c61a78c7 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2720,6 +2720,9 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, * if supported. In any case the default RGB888 format is added */ + /* Default 8bit RGB fallback */ + output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; + if (max_bpc >= 16 && info->bpc == 16) { if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444) output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48; @@ -2753,9 +2756,6 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge, if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444) output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24; - /* Default 8bit RGB fallback */ - output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24; - *num_output_fmts = i; return output_fmts; diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 3c3561942eb6..eb24322df721 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -931,9 +931,9 @@ static void ti_sn_bridge_set_video_timings(struct ti_sn65dsi86 *pdata) &pdata->bridge.encoder->crtc->state->adjusted_mode; u8 hsync_polarity = 0, vsync_polarity = 0; - if (mode->flags & DRM_MODE_FLAG_PHSYNC) + if (mode->flags & DRM_MODE_FLAG_NHSYNC) hsync_polarity = CHA_HSYNC_POLARITY; - if (mode->flags & DRM_MODE_FLAG_PVSYNC) + if (mode->flags & DRM_MODE_FLAG_NVSYNC) vsync_polarity = CHA_VSYNC_POLARITY; ti_sn65dsi86_write_u16(pdata, SN_CHA_ACTIVE_LINE_LENGTH_LOW_REG, |