diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_display_driver.c')
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_display_driver.c | 188 |
1 files changed, 172 insertions, 16 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_display_driver.c b/drivers/gpu/drm/i915/display/intel_display_driver.c index 9df9097a0255..87dd07e0d138 100644 --- a/drivers/gpu/drm/i915/display/intel_display_driver.c +++ b/drivers/gpu/drm/i915/display/intel_display_driver.c @@ -35,6 +35,7 @@ #include "intel_dkl_phy.h" #include "intel_dmc.h" #include "intel_dp.h" +#include "intel_dp_tunnel.h" #include "intel_dpll.h" #include "intel_dpll_mgr.h" #include "intel_fb.h" @@ -45,6 +46,7 @@ #include "intel_hdcp.h" #include "intel_hotplug.h" #include "intel_hti.h" +#include "intel_modeset_lock.h" #include "intel_modeset_setup.h" #include "intel_opregion.h" #include "intel_overlay.h" @@ -276,12 +278,144 @@ cleanup_bios: return ret; } +static void set_display_access(struct drm_i915_private *i915, + bool any_task_allowed, + struct task_struct *allowed_task) +{ + struct drm_modeset_acquire_ctx ctx; + int err; + + intel_modeset_lock_ctx_retry(&ctx, NULL, 0, err) { + err = drm_modeset_lock_all_ctx(&i915->drm, &ctx); + if (err) + continue; + + i915->display.access.any_task_allowed = any_task_allowed; + i915->display.access.allowed_task = allowed_task; + } + + drm_WARN_ON(&i915->drm, err); +} + +/** + * intel_display_driver_enable_user_access - Enable display HW access for all threads + * @i915: i915 device instance + * + * Enable the display HW access for all threads. Examples for such accesses + * are modeset commits and connector probing. + * + * This function should be called during driver loading and system resume once + * all the HW initialization steps are done. + */ +void intel_display_driver_enable_user_access(struct drm_i915_private *i915) +{ + set_display_access(i915, true, NULL); + + intel_hpd_enable_detection_work(i915); +} + +/** + * intel_display_driver_disable_user_access - Disable display HW access for user threads + * @i915: i915 device instance + * + * Disable the display HW access for user threads. Examples for such accesses + * are modeset commits and connector probing. For the current thread the + * access is still enabled, which should only perform HW init/deinit + * programming (as the initial modeset during driver loading or the disabling + * modeset during driver unloading and system suspend/shutdown). This function + * should be followed by calling either intel_display_driver_enable_user_access() + * after completing the HW init programming or + * intel_display_driver_suspend_access() after completing the HW deinit + * programming. + * + * This function should be called during driver loading/unloading and system + * suspend/shutdown before starting the HW init/deinit programming. + */ +void intel_display_driver_disable_user_access(struct drm_i915_private *i915) +{ + intel_hpd_disable_detection_work(i915); + + set_display_access(i915, false, current); +} + +/** + * intel_display_driver_suspend_access - Suspend display HW access for all threads + * @i915: i915 device instance + * + * Disable the display HW access for all threads. Examples for such accesses + * are modeset commits and connector probing. This call should be either + * followed by calling intel_display_driver_resume_access(), or the driver + * should be unloaded/shutdown. + * + * This function should be called during driver unloading and system + * suspend/shutdown after completing the HW deinit programming. + */ +void intel_display_driver_suspend_access(struct drm_i915_private *i915) +{ + set_display_access(i915, false, NULL); +} + +/** + * intel_display_driver_resume_access - Resume display HW access for the resume thread + * @i915: i915 device instance + * + * Enable the display HW access for the current resume thread, keeping the + * access disabled for all other (user) threads. Examples for such accesses + * are modeset commits and connector probing. The resume thread should only + * perform HW init programming (as the restoring modeset). This function + * should be followed by calling intel_display_driver_enable_user_access(), + * after completing the HW init programming steps. + * + * This function should be called during system resume before starting the HW + * init steps. + */ +void intel_display_driver_resume_access(struct drm_i915_private *i915) +{ + set_display_access(i915, false, current); +} + +/** + * intel_display_driver_check_access - Check if the current thread has disaplay HW access + * @i915: i915 device instance + * + * Check whether the current thread has display HW access, print a debug + * message if it doesn't. Such accesses are modeset commits and connector + * probing. If the function returns %false any HW access should be prevented. + * + * Returns %true if the current thread has display HW access, %false + * otherwise. + */ +bool intel_display_driver_check_access(struct drm_i915_private *i915) +{ + char comm[TASK_COMM_LEN]; + char current_task[TASK_COMM_LEN + 16]; + char allowed_task[TASK_COMM_LEN + 16] = "none"; + + if (i915->display.access.any_task_allowed || + i915->display.access.allowed_task == current) + return true; + + snprintf(current_task, sizeof(current_task), "%s[%d]", + get_task_comm(comm, current), + task_pid_vnr(current)); + + if (i915->display.access.allowed_task) + snprintf(allowed_task, sizeof(allowed_task), "%s[%d]", + get_task_comm(comm, i915->display.access.allowed_task), + task_pid_vnr(i915->display.access.allowed_task)); + + drm_dbg_kms(&i915->drm, + "Reject display access from task %s (allowed to %s)\n", + current_task, allowed_task); + + return false; +} + /* part #2: call after irq install, but before gem init */ int intel_display_driver_probe_nogem(struct drm_i915_private *i915) { struct drm_device *dev = &i915->drm; enum pipe pipe; - struct intel_crtc *crtc; int ret; if (!HAS_DISPLAY(i915)) @@ -301,10 +435,8 @@ int intel_display_driver_probe_nogem(struct drm_i915_private *i915) for_each_pipe(i915, pipe) { ret = intel_crtc_init(i915, pipe); - if (ret) { - intel_mode_config_cleanup(i915); - return ret; - } + if (ret) + goto err_mode_config; } intel_plane_possible_crtcs_init(i915); @@ -315,8 +447,6 @@ int intel_display_driver_probe_nogem(struct drm_i915_private *i915) intel_display_driver_init_hw(i915); intel_dpll_update_ref_clks(i915); - intel_hdcp_component_init(i915); - if (i915->display.cdclk.max_cdclk_freq == 0) intel_update_max_cdclk(i915); @@ -326,16 +456,18 @@ int intel_display_driver_probe_nogem(struct drm_i915_private *i915) intel_vga_disable(i915); intel_setup_outputs(i915); + ret = intel_dp_tunnel_mgr_init(i915); + if (ret) + goto err_hdcp; + + intel_display_driver_disable_user_access(i915); + drm_modeset_lock_all(dev); intel_modeset_setup_hw_state(i915, dev->mode_config.acquire_ctx); intel_acpi_assign_connector_fwnodes(i915); drm_modeset_unlock_all(dev); - for_each_intel_crtc(dev, crtc) { - if (!to_intel_crtc_state(crtc->base.state)->uapi.active) - continue; - intel_crtc_initial_plane_config(crtc); - } + intel_initial_plane_config(i915); /* * Make sure hardware watermarks really match the state we read out. @@ -346,6 +478,13 @@ int intel_display_driver_probe_nogem(struct drm_i915_private *i915) ilk_wm_sanitize(i915); return 0; + +err_hdcp: + intel_hdcp_component_fini(i915); +err_mode_config: + intel_mode_config_cleanup(i915); + + return ret; } /* part #3: call after gem init */ @@ -357,6 +496,13 @@ int intel_display_driver_probe(struct drm_i915_private *i915) return 0; /* + * This will bind stuff into ggtt, so it needs to be done after + * the BIOS fb takeover and whatever else magic ggtt reservations + * happen during gem/ggtt init. + */ + intel_hdcp_component_init(i915); + + /* * Force all active planes to recompute their states. So that on * mode_setcrtc after probe, all the intel_plane_state variables * are already calculated and there is no assert_plane warnings @@ -374,7 +520,6 @@ int intel_display_driver_probe(struct drm_i915_private *i915) /* Only enable hotplug handling once the fbdev is fully set up. */ intel_hpd_init(i915); - intel_hpd_poll_disable(i915); skl_watermark_ipc_init(i915); @@ -383,7 +528,8 @@ int intel_display_driver_probe(struct drm_i915_private *i915) void intel_display_driver_register(struct drm_i915_private *i915) { - struct drm_printer p = drm_debug_printer("i915 display info:"); + struct drm_printer p = drm_dbg_printer(&i915->drm, DRM_UT_KMS, + "i915 display info:"); if (!HAS_DISPLAY(i915)) return; @@ -394,6 +540,8 @@ void intel_display_driver_register(struct drm_i915_private *i915) intel_audio_init(i915); + intel_display_driver_enable_user_access(i915); + intel_display_debugfs_register(i915); /* @@ -412,6 +560,7 @@ void intel_display_driver_register(struct drm_i915_private *i915) * fbdev->async_cookie. */ drm_kms_helper_poll_init(&i915->drm); + intel_hpd_poll_disable(i915); intel_display_device_info_print(DISPLAY_INFO(i915), DISPLAY_RUNTIME_INFO(i915), &p); @@ -440,6 +589,8 @@ void intel_display_driver_remove_noirq(struct drm_i915_private *i915) if (!HAS_DISPLAY(i915)) return; + intel_display_driver_suspend_access(i915); + /* * Due to the hpd irq storm handling the hotplug work can re-arm the * poll handlers. Hence disable polling after hpd handling is shut down. @@ -458,6 +609,8 @@ void intel_display_driver_remove_noirq(struct drm_i915_private *i915) intel_mode_config_cleanup(i915); + intel_dp_tunnel_mgr_cleanup(i915); + intel_overlay_cleanup(i915); intel_gmbus_teardown(i915); @@ -486,14 +639,17 @@ void intel_display_driver_unregister(struct drm_i915_private *i915) return; intel_fbdev_unregister(i915); - intel_audio_deinit(i915); - /* * After flushing the fbdev (incl. a late async config which * will have delayed queuing of a hotplug event), then flush * the hotplug events. */ drm_kms_helper_poll_fini(&i915->drm); + + intel_display_driver_disable_user_access(i915); + + intel_audio_deinit(i915); + drm_atomic_helper_shutdown(&i915->drm); acpi_video_unregister(); |