diff options
Diffstat (limited to 'drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c')
-rw-r--r-- | drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 479 |
1 files changed, 475 insertions, 4 deletions
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c index f22583353957..582b1428f971 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c @@ -3,11 +3,479 @@ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. */ +#include <linux/clk-provider.h> #include <linux/delay.h> #include "dsi_phy.h" #include "dsi.xml.h" +/* + * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1): + * + * + * +------+ + * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock) + * F * byte_clk | +------+ + * | bit clock divider (F / 8) + * | + * | +------+ + * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG + * | +------+ | (sets parent rate) + * | byte clock divider (F) | + * | | + * | o---> To esc RCG + * | (doesn't set parent rate) + * | + * | +------+ + * o-----| DIV3 |----dsi0pll------o---> To dsi RCG + * +------+ | (sets parent rate) + * dsi clock divider (F * magic) | + * | + * o---> To pixel rcg + * (doesn't set parent rate) + */ + +#define POLL_MAX_READS 8000 +#define POLL_TIMEOUT_US 1 + +#define VCO_REF_CLK_RATE 27000000 +#define VCO_MIN_RATE 600000000 +#define VCO_MAX_RATE 1200000000 + +#define VCO_PREF_DIV_RATIO 27 + +struct pll_28nm_cached_state { + unsigned long vco_rate; + u8 postdiv3; + u8 postdiv2; + u8 postdiv1; +}; + +struct clk_bytediv { + struct clk_hw hw; + void __iomem *reg; +}; + +struct dsi_pll_28nm { + struct clk_hw clk_hw; + + struct msm_dsi_phy *phy; + + struct pll_28nm_cached_state cached_state; +}; + +#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, clk_hw) + +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, + int nb_tries, int timeout_us) +{ + bool pll_locked = false; + u32 val; + + while (nb_tries--) { + val = dsi_phy_read(pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_RDY); + pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY); + + if (pll_locked) + break; + + udelay(timeout_us); + } + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +/* + * Clock Callbacks + */ +static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + void __iomem *base = pll_28nm->phy->pll_base; + u32 val, temp, fb_divider; + + DBG("rate=%lu, parent's=%lu", rate, parent_rate); + + temp = rate / 10; + val = VCO_REF_CLK_RATE / 10; + fb_divider = (temp * VCO_PREF_DIV_RATIO) / val; + fb_divider = fb_divider / 2 - 1; + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1, + fb_divider & 0xff); + + val = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2); + + val |= (fb_divider >> 8) & 0x07; + + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2, + val); + + val = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + + val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f; + + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3, + val); + + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6, + 0xf); + + val = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val |= 0x7 << 4; + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + val); + + return 0; +} + +static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + + return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, + POLL_TIMEOUT_US); +} + +static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + void __iomem *base = pll_28nm->phy->pll_base; + unsigned long vco_rate; + u32 status, fb_divider, temp, ref_divider; + + VERB("parent_rate=%lu", parent_rate); + + status = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0); + + if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) { + fb_divider = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1); + fb_divider &= 0xff; + temp = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07; + fb_divider = (temp << 8) | fb_divider; + fb_divider += 1; + + ref_divider = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + ref_divider &= 0x3f; + ref_divider += 1; + + /* multiply by 2 */ + vco_rate = (parent_rate / ref_divider) * fb_divider * 2; + } else { + vco_rate = 0; + } + + DBG("returning vco rate = %lu", vco_rate); + + return vco_rate; +} + +static int dsi_pll_28nm_vco_prepare(struct clk_hw *hw) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + struct device *dev = &pll_28nm->phy->pdev->dev; + void __iomem *base = pll_28nm->phy->pll_base; + bool locked; + unsigned int bit_div, byte_div; + int max_reads = 1000, timeout_us = 100; + u32 val; + + DBG("id=%d", pll_28nm->phy->id); + + if (unlikely(pll_28nm->phy->pll_on)) + return 0; + + /* + * before enabling the PLL, configure the bit clock divider since we + * don't expose it as a clock to the outside world + * 1: read back the byte clock divider that should already be set + * 2: divide by 8 to get bit clock divider + * 3: write it to POSTDIV1 + */ + val = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + byte_div = val + 1; + bit_div = byte_div / 8; + + val = dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val &= ~0xf; + val |= (bit_div - 1); + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val); + + /* enable the PLL */ + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, + DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE); + + locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); + + if (unlikely(!locked)) { + DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); + return -EINVAL; + } + + DBG("DSI PLL lock success"); + pll_28nm->phy->pll_on = true; + + return 0; +} + +static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + + DBG("id=%d", pll_28nm->phy->id); + + if (unlikely(!pll_28nm->phy->pll_on)) + return; + + dsi_phy_write(pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00); + + pll_28nm->phy->pll_on = false; +} + +static long dsi_pll_28nm_clk_round_rate(struct clk_hw *hw, + unsigned long rate, unsigned long *parent_rate) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + + if (rate < pll_28nm->phy->cfg->min_pll_rate) + return pll_28nm->phy->cfg->min_pll_rate; + else if (rate > pll_28nm->phy->cfg->max_pll_rate) + return pll_28nm->phy->cfg->max_pll_rate; + else + return rate; +} + +static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { + .round_rate = dsi_pll_28nm_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = dsi_pll_28nm_vco_prepare, + .unprepare = dsi_pll_28nm_vco_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + +/* + * Custom byte clock divier clk_ops + * + * This clock is the entry point to configuring the PLL. The user (dsi host) + * will set this clock's rate to the desired byte clock rate. The VCO lock + * frequency is a multiple of the byte clock rate. The multiplication factor + * (shown as F in the diagram above) is a function of the byte clock rate. + * + * This custom divider clock ensures that its parent (VCO) is set to the + * desired rate, and that the byte clock postdivider (POSTDIV2) is configured + * accordingly + */ +#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw) + +static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + unsigned int div; + + div = dsi_phy_read(bytediv->reg) & 0xff; + + return parent_rate / (div + 1); +} + +/* find multiplication factor(wrt byte clock) at which the VCO should be set */ +static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate) +{ + unsigned long bit_mhz; + + /* convert to bit clock in Mhz */ + bit_mhz = (byte_clk_rate * 8) / 1000000; + + if (bit_mhz < 125) + return 64; + else if (bit_mhz < 250) + return 32; + else if (bit_mhz < 600) + return 16; + else + return 8; +} + +static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long best_parent; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + best_parent = rate * factor; + *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent); + + return *prate / factor; +} + +static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + u32 val; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + val = dsi_phy_read(bytediv->reg); + val |= (factor - 1) & 0xff; + dsi_phy_write(bytediv->reg, val); + + return 0; +} + +/* Our special byte clock divider ops */ +static const struct clk_ops clk_bytediv_ops = { + .round_rate = clk_bytediv_round_rate, + .set_rate = clk_bytediv_set_rate, + .recalc_rate = clk_bytediv_recalc_rate, +}; + +/* + * PLL Callbacks + */ +static void dsi_28nm_pll_save_state(struct msm_dsi_phy *phy) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->phy->pll_base; + + cached_state->postdiv3 = + dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10); + cached_state->postdiv2 = + dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + cached_state->postdiv1 = + dsi_phy_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + + cached_state->vco_rate = clk_hw_get_rate(phy->vco_hw); +} + +static int dsi_28nm_pll_restore_state(struct msm_dsi_phy *phy) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->phy->pll_base; + int ret; + + ret = dsi_pll_28nm_clk_set_rate(phy->vco_hw, + cached_state->vco_rate, 0); + if (ret) { + DRM_DEV_ERROR(&pll_28nm->phy->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + cached_state->postdiv3); + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9, + cached_state->postdiv2); + dsi_phy_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + cached_state->postdiv1); + + return 0; +} + +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **provided_clocks) +{ + char *clk_name, *parent_name, *vco_name; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_28nm_vco, + }; + struct device *dev = &pll_28nm->phy->pdev->dev; + struct clk_hw *hw; + struct clk_bytediv *bytediv; + struct clk_init_data bytediv_init = { }; + int ret; + + DBG("%d", pll_28nm->phy->id); + + bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL); + if (!bytediv) + return -ENOMEM; + + vco_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!vco_name) + return -ENOMEM; + + clk_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!clk_name) + return -ENOMEM; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->phy->id); + vco_init.name = vco_name; + + pll_28nm->clk_hw.init = &vco_init; + + ret = devm_clk_hw_register(dev, &pll_28nm->clk_hw); + if (ret) + return ret; + + /* prepare and register bytediv */ + bytediv->hw.init = &bytediv_init; + bytediv->reg = pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9; + + snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->phy->id); + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->phy->id); + + bytediv_init.name = clk_name; + bytediv_init.ops = &clk_bytediv_ops; + bytediv_init.flags = CLK_SET_RATE_PARENT; + bytediv_init.parent_names = (const char * const *) &parent_name; + bytediv_init.num_parents = 1; + + /* DIV2 */ + ret = devm_clk_hw_register(dev, &bytediv->hw); + if (ret) + return ret; + provided_clocks[DSI_BYTE_PLL_CLK] = &bytediv->hw; + + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->phy->id); + /* DIV3 */ + hw = devm_clk_hw_register_divider(dev, clk_name, + parent_name, 0, pll_28nm->phy->pll_base + + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + 0, 8, 0, NULL); + if (IS_ERR(hw)) + return PTR_ERR(hw); + provided_clocks[DSI_PIXEL_PLL_CLK] = hw; + + return 0; +} + +static int dsi_pll_28nm_8960_init(struct msm_dsi_phy *phy) +{ + struct platform_device *pdev = phy->pdev; + struct dsi_pll_28nm *pll_28nm; + int ret; + + if (!pdev) + return -ENODEV; + + pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); + if (!pll_28nm) + return -ENOMEM; + + pll_28nm->phy = phy; + + ret = pll_28nm_register(pll_28nm, phy->provided_clocks->hws); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ret; + } + + phy->vco_hw = &pll_28nm->clk_hw; + + return 0; +} + static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy, struct msm_dsi_dphy_timing *timing) { @@ -117,7 +585,7 @@ static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy) dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88); } -static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, +static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, struct msm_dsi_phy_clk_request *clk_req) { struct msm_dsi_dphy_timing *timing = &phy->timing; @@ -174,8 +642,7 @@ static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy) } const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = { - .type = MSM_DSI_PHY_28NM_8960, - .src_pll_truthtable = { {true, true}, {false, true} }, + .has_phy_regulator = true, .reg_cfg = { .num = 1, .regs = { @@ -185,8 +652,12 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = { .ops = { .enable = dsi_28nm_phy_enable, .disable = dsi_28nm_phy_disable, - .init = msm_dsi_phy_init_common, + .pll_init = dsi_pll_28nm_8960_init, + .save_pll_state = dsi_28nm_pll_save_state, + .restore_pll_state = dsi_28nm_pll_restore_state, }, + .min_pll_rate = VCO_MIN_RATE, + .max_pll_rate = VCO_MAX_RATE, .io_start = { 0x4700300, 0x5800300 }, .num_dsi_phy = 2, }; |