summaryrefslogtreecommitdiff
path: root/drivers/hid
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hid')
-rw-r--r--drivers/hid/hid-ft260.c325
1 files changed, 191 insertions, 134 deletions
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 79505c64dbfe..333341e80b0e 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -30,12 +30,21 @@ MODULE_PARM_DESC(debug, "Toggle FT260 debugging messages");
#define FT260_REPORT_MAX_LENGTH (64)
#define FT260_I2C_DATA_REPORT_ID(len) (FT260_I2C_REPORT_MIN + (len - 1) / 4)
+
+#define FT260_WAKEUP_NEEDED_AFTER_MS (4800) /* 5s minus 200ms margin */
+
/*
- * The input report format assigns 62 bytes for the data payload, but ft260
- * returns 60 and 2 in two separate transactions. To minimize transfer time
- * in reading chunks mode, set the maximum read payload length to 60 bytes.
- */
-#define FT260_RD_DATA_MAX (60)
+ * The ft260 input report format defines 62 bytes for the data payload, but
+ * when requested 62 bytes, the controller returns 60 and 2 in separate input
+ * reports. To achieve better performance with the multi-report read data
+ * transfers, we set the maximum read payload length to a multiple of 60.
+ * With a 100 kHz I2C clock, one 240 bytes read takes about 1/27 second,
+ * which is excessive; On the other hand, some higher layer drivers like at24
+ * or optoe limit the i2c reads to 128 bytes. To not block other drivers out
+ * of I2C for potentially troublesome amounts of time, we select the maximum
+ * read payload length to be 180 bytes.
+*/
+#define FT260_RD_DATA_MAX (180)
#define FT260_WR_DATA_MAX (60)
/*
@@ -230,6 +239,7 @@ struct ft260_device {
struct completion wait;
struct mutex lock;
u8 write_buf[FT260_REPORT_MAX_LENGTH];
+ unsigned long need_wakeup_at;
u8 *read_buf;
u16 read_idx;
u16 read_len;
@@ -293,12 +303,26 @@ static int ft260_i2c_reset(struct hid_device *hdev)
return ret;
}
-static int ft260_xfer_status(struct ft260_device *dev)
+static int ft260_xfer_status(struct ft260_device *dev, u8 bus_busy)
{
struct hid_device *hdev = dev->hdev;
struct ft260_get_i2c_status_report report;
int ret;
+ if (time_is_before_jiffies(dev->need_wakeup_at)) {
+ ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
+ (u8 *)&report, sizeof(report));
+ if (unlikely(ret < 0)) {
+ hid_err(hdev, "failed to retrieve status: %d, no wakeup\n",
+ ret);
+ } else {
+ dev->need_wakeup_at = jiffies +
+ msecs_to_jiffies(FT260_WAKEUP_NEEDED_AFTER_MS);
+ ft260_dbg("bus_status %#02x, wakeup\n",
+ report.bus_status);
+ }
+ }
+
ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
(u8 *)&report, sizeof(report));
if (unlikely(ret < 0)) {
@@ -310,30 +334,20 @@ static int ft260_xfer_status(struct ft260_device *dev)
ft260_dbg("bus_status %#02x, clock %u\n", report.bus_status,
dev->clock);
- if (report.bus_status & FT260_I2C_STATUS_CTRL_BUSY)
+ if (report.bus_status & (FT260_I2C_STATUS_CTRL_BUSY | bus_busy))
return -EAGAIN;
- if (report.bus_status & FT260_I2C_STATUS_BUS_BUSY)
- return -EBUSY;
-
- if (report.bus_status & FT260_I2C_STATUS_ERROR)
+ /*
+ * The error condition (bit 1) is a status bit reflecting any
+ * error conditions. When any of the bits 2, 3, or 4 are raised
+ * to 1, bit 1 is also set to 1.
+ */
+ if (report.bus_status & FT260_I2C_STATUS_ERROR) {
+ hid_err(hdev, "i2c bus error: %#02x\n", report.bus_status);
return -EIO;
+ }
- ret = -EIO;
-
- if (report.bus_status & FT260_I2C_STATUS_ADDR_NO_ACK)
- ft260_dbg("unacknowledged address\n");
-
- if (report.bus_status & FT260_I2C_STATUS_DATA_NO_ACK)
- ft260_dbg("unacknowledged data\n");
-
- if (report.bus_status & FT260_I2C_STATUS_ARBITR_LOST)
- ft260_dbg("arbitration loss\n");
-
- if (report.bus_status & FT260_I2C_STATUS_CTRL_IDLE)
- ret = 0;
-
- return ret;
+ return 0;
}
static int ft260_hid_output_report(struct hid_device *hdev, u8 *data,
@@ -355,8 +369,11 @@ static int ft260_hid_output_report(struct hid_device *hdev, u8 *data,
static int ft260_hid_output_report_check_status(struct ft260_device *dev,
u8 *data, int len)
{
- int ret, usec, try = 3;
+ u8 bus_busy;
+ int ret, usec, try = 100;
struct hid_device *hdev = dev->hdev;
+ struct ft260_i2c_write_request_report *rep =
+ (struct ft260_i2c_write_request_report *)data;
ret = ft260_hid_output_report(hdev, data, len);
if (ret < 0) {
@@ -366,17 +383,31 @@ static int ft260_hid_output_report_check_status(struct ft260_device *dev,
return ret;
}
- /* transfer time = 1 / clock(KHz) * 10 bits * bytes */
- usec = 10000 / dev->clock * len;
- usleep_range(usec, usec + 100);
- ft260_dbg("wait %d usec, len %d\n", usec, len);
+ /* transfer time = 1 / clock(KHz) * 9 bits * bytes */
+ usec = len * 9000 / dev->clock;
+ if (usec > 2000) {
+ usec -= 1500;
+ usleep_range(usec, usec + 100);
+ ft260_dbg("wait %d usec, len %d\n", usec, len);
+ }
+
+ /*
+ * Do not check the busy bit for combined transactions
+ * since the controller keeps the bus busy between writing
+ * and reading IOs to ensure an atomic operation.
+ */
+ if (rep->flag == FT260_FLAG_START)
+ bus_busy = 0;
+ else
+ bus_busy = FT260_I2C_STATUS_BUS_BUSY;
+
do {
- ret = ft260_xfer_status(dev);
+ ret = ft260_xfer_status(dev, bus_busy);
if (ret != -EAGAIN)
break;
} while (--try);
- if (ret == 0 || ret == -EBUSY)
+ if (ret == 0)
return 0;
ft260_i2c_reset(hdev);
@@ -384,41 +415,49 @@ static int ft260_hid_output_report_check_status(struct ft260_device *dev,
}
static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
- int data_len, u8 flag)
+ int len, u8 flag)
{
- int len, ret, idx = 0;
+ int ret, wr_len, idx = 0;
struct hid_device *hdev = dev->hdev;
struct ft260_i2c_write_request_report *rep =
(struct ft260_i2c_write_request_report *)dev->write_buf;
+ if (len < 1)
+ return -EINVAL;
+
+ rep->flag = FT260_FLAG_START;
+
do {
- if (data_len <= FT260_WR_DATA_MAX)
- len = data_len;
- else
- len = FT260_WR_DATA_MAX;
+ if (len <= FT260_WR_DATA_MAX) {
+ wr_len = len;
+ if (flag == FT260_FLAG_START_STOP)
+ rep->flag |= FT260_FLAG_STOP;
+ } else {
+ wr_len = FT260_WR_DATA_MAX;
+ }
- rep->report = FT260_I2C_DATA_REPORT_ID(len);
+ rep->report = FT260_I2C_DATA_REPORT_ID(wr_len);
rep->address = addr;
- rep->length = len;
- rep->flag = flag;
+ rep->length = wr_len;
- memcpy(rep->data, &data[idx], len);
+ memcpy(rep->data, &data[idx], wr_len);
- ft260_dbg("rep %#02x addr %#02x off %d len %d d[0] %#02x\n",
- rep->report, addr, idx, len, data[0]);
+ ft260_dbg("rep %#02x addr %#02x off %d len %d wlen %d flag %#x d[0] %#02x\n",
+ rep->report, addr, idx, len, wr_len,
+ rep->flag, data[0]);
ret = ft260_hid_output_report_check_status(dev, (u8 *)rep,
- len + 4);
+ wr_len + 4);
if (ret < 0) {
- hid_err(hdev, "%s: failed to start transfer, ret %d\n",
- __func__, ret);
+ hid_err(hdev, "%s: failed with %d\n", __func__, ret);
return ret;
}
- data_len -= len;
- idx += len;
+ len -= wr_len;
+ idx += wr_len;
+ rep->flag = 0;
- } while (data_len > 0);
+ } while (len > 0);
return 0;
}
@@ -457,49 +496,74 @@ static int ft260_smbus_write(struct ft260_device *dev, u8 addr, u8 cmd,
static int ft260_i2c_read(struct ft260_device *dev, u8 addr, u8 *data,
u16 len, u8 flag)
{
+ u16 rd_len;
+ u16 rd_data_max = 60;
+ int timeout, ret = 0;
struct ft260_i2c_read_request_report rep;
struct hid_device *hdev = dev->hdev;
- int timeout;
- int ret;
+ u8 bus_busy = 0;
- if (len > FT260_RD_DATA_MAX) {
- hid_err(hdev, "%s: unsupported rd len: %d\n", __func__, len);
- return -EINVAL;
- }
+ if ((flag & FT260_FLAG_START_REPEATED) == FT260_FLAG_START_REPEATED)
+ flag = FT260_FLAG_START_REPEATED;
+ else
+ flag = FT260_FLAG_START;
+ do {
+ if (len <= rd_data_max) {
+ rd_len = len;
+ flag |= FT260_FLAG_STOP;
+ } else {
+ rd_len = rd_data_max;
+ }
+ rd_data_max = FT260_RD_DATA_MAX;
- dev->read_idx = 0;
- dev->read_buf = data;
- dev->read_len = len;
+ rep.report = FT260_I2C_READ_REQ;
+ rep.length = cpu_to_le16(rd_len);
+ rep.address = addr;
+ rep.flag = flag;
- rep.report = FT260_I2C_READ_REQ;
- rep.length = cpu_to_le16(len);
- rep.address = addr;
- rep.flag = flag;
+ ft260_dbg("rep %#02x addr %#02x len %d rlen %d flag %#x\n",
+ rep.report, rep.address, len, rd_len, flag);
- ft260_dbg("rep %#02x addr %#02x len %d\n", rep.report, rep.address,
- rep.length);
+ reinit_completion(&dev->wait);
- reinit_completion(&dev->wait);
+ dev->read_idx = 0;
+ dev->read_buf = data;
+ dev->read_len = rd_len;
- ret = ft260_hid_output_report(hdev, (u8 *)&rep, sizeof(rep));
- if (ret < 0) {
- hid_err(hdev, "%s: failed to start transaction, ret %d\n",
- __func__, ret);
- return ret;
- }
+ ret = ft260_hid_output_report(hdev, (u8 *)&rep, sizeof(rep));
+ if (ret < 0) {
+ hid_err(hdev, "%s: failed with %d\n", __func__, ret);
+ goto ft260_i2c_read_exit;
+ }
- timeout = msecs_to_jiffies(5000);
- if (!wait_for_completion_timeout(&dev->wait, timeout)) {
- ft260_i2c_reset(hdev);
- return -ETIMEDOUT;
- }
+ timeout = msecs_to_jiffies(5000);
+ if (!wait_for_completion_timeout(&dev->wait, timeout)) {
+ ret = -ETIMEDOUT;
+ ft260_i2c_reset(hdev);
+ goto ft260_i2c_read_exit;
+ }
- ret = ft260_xfer_status(dev);
- if (ret == 0)
- return 0;
+ dev->read_buf = NULL;
- ft260_i2c_reset(hdev);
- return -EIO;
+ if (flag & FT260_FLAG_STOP)
+ bus_busy = FT260_I2C_STATUS_BUS_BUSY;
+
+ ret = ft260_xfer_status(dev, bus_busy);
+ if (ret < 0) {
+ ret = -EIO;
+ ft260_i2c_reset(hdev);
+ goto ft260_i2c_read_exit;
+ }
+
+ len -= rd_len;
+ data += rd_len;
+ flag = 0;
+
+ } while (len > 0);
+
+ft260_i2c_read_exit:
+ dev->read_buf = NULL;
+ return ret;
}
/*
@@ -510,45 +574,37 @@ static int ft260_i2c_read(struct ft260_device *dev, u8 addr, u8 *data,
*/
static int ft260_i2c_write_read(struct ft260_device *dev, struct i2c_msg *msgs)
{
- int len, ret;
- u16 left_len = msgs[1].len;
- u8 *read_buf = msgs[1].buf;
+ int ret;
+ int wr_len = msgs[0].len;
+ int rd_len = msgs[1].len;
+ struct hid_device *hdev = dev->hdev;
u8 addr = msgs[0].addr;
u16 read_off = 0;
- struct hid_device *hdev = dev->hdev;
- if (msgs[0].len > 2) {
- hid_err(hdev, "%s: unsupported wr len: %d\n", __func__,
- msgs[0].len);
+ if (wr_len > 2) {
+ hid_err(hdev, "%s: invalid wr_len: %d\n", __func__, wr_len);
return -EOPNOTSUPP;
}
- memcpy(&read_off, msgs[0].buf, msgs[0].len);
-
- do {
- if (left_len <= FT260_RD_DATA_MAX)
- len = left_len;
+ if (ft260_debug) {
+ if (wr_len == 2)
+ read_off = be16_to_cpu(*(__be16 *)msgs[0].buf);
else
- len = FT260_RD_DATA_MAX;
-
- ft260_dbg("read_off %#x left_len %d len %d\n", read_off,
- left_len, len);
-
- ret = ft260_i2c_write(dev, addr, (u8 *)&read_off, msgs[0].len,
- FT260_FLAG_START);
- if (ret < 0)
- return ret;
+ read_off = *msgs[0].buf;
- ret = ft260_i2c_read(dev, addr, read_buf, len,
- FT260_FLAG_START_STOP);
- if (ret < 0)
- return ret;
+ pr_info("%s: off %#x rlen %d wlen %d\n", __func__,
+ read_off, rd_len, wr_len);
+ }
- left_len -= len;
- read_buf += len;
- read_off += len;
+ ret = ft260_i2c_write(dev, addr, msgs[0].buf, wr_len,
+ FT260_FLAG_START);
+ if (ret < 0)
+ return ret;
- } while (left_len > 0);
+ ret = ft260_i2c_read(dev, addr, msgs[1].buf, rd_len,
+ FT260_FLAG_START_STOP_REPEATED);
+ if (ret < 0)
+ return ret;
return 0;
}
@@ -613,14 +669,6 @@ static int ft260_smbus_xfer(struct i2c_adapter *adapter, u16 addr, u16 flags,
}
switch (size) {
- case I2C_SMBUS_QUICK:
- if (read_write == I2C_SMBUS_READ)
- ret = ft260_i2c_read(dev, addr, &data->byte, 0,
- FT260_FLAG_START_STOP);
- else
- ret = ft260_smbus_write(dev, addr, cmd, NULL, 0,
- FT260_FLAG_START_STOP);
- break;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_READ)
ret = ft260_i2c_read(dev, addr, &data->byte, 1,
@@ -703,7 +751,7 @@ smbus_exit:
static u32 ft260_functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_QUICK |
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_I2C_BLOCK;
}
@@ -782,7 +830,7 @@ static int ft260_byte_show(struct hid_device *hdev, int id, u8 *cfg, int len,
}
static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
- u16 *field, u8 *buf)
+ __le16 *field, u8 *buf)
{
int ret;
@@ -811,9 +859,9 @@ static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
#define FT260_I2CST_ATTR_SHOW(name) \
FT260_ATTR_SHOW(name, ft260_get_i2c_status_report, \
- FT260_I2C_STATUS, u16, ft260_word_show)
+ FT260_I2C_STATUS, __le16, ft260_word_show)
-#define FT260_ATTR_STORE(name, reptype, id, req, type, func) \
+#define FT260_ATTR_STORE(name, reptype, id, req, type, ctype, func) \
static ssize_t name##_store(struct device *kdev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
@@ -823,7 +871,7 @@ static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
type name; \
int ret; \
\
- if (!func(buf, 10, &name)) { \
+ if (!func(buf, 10, (ctype *)&name)) { \
rep.name = name; \
rep.report = id; \
rep.request = req; \
@@ -839,11 +887,11 @@ static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
#define FT260_BYTE_ATTR_STORE(name, reptype, req) \
FT260_ATTR_STORE(name, reptype, FT260_SYSTEM_SETTINGS, req, \
- u8, kstrtou8)
+ u8, u8, kstrtou8)
#define FT260_WORD_ATTR_STORE(name, reptype, req) \
FT260_ATTR_STORE(name, reptype, FT260_SYSTEM_SETTINGS, req, \
- u16, kstrtou16)
+ __le16, u16, kstrtou16)
FT260_SSTAT_ATTR_SHOW(chip_mode);
static DEVICE_ATTR_RO(chip_mode);
@@ -928,7 +976,7 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
}
- ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ ret = hid_hw_start(hdev, 0);
if (ret) {
hid_err(hdev, "failed to start HID HW\n");
return ret;
@@ -955,6 +1003,10 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret <= 0)
goto err_hid_close;
+ hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n",
+ hdev->version >> 8, hdev->version & 0xff, hdev->name,
+ hdev->phys);
+
hid_set_drvdata(hdev, dev);
dev->hdev = hdev;
dev->adap.owner = THIS_MODULE;
@@ -963,13 +1015,12 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
dev->adap.quirks = &ft260_i2c_quirks;
dev->adap.dev.parent = &hdev->dev;
snprintf(dev->adap.name, sizeof(dev->adap.name),
- "FT260 usb-i2c bridge on hidraw%d",
- ((struct hidraw *)hdev->hidraw)->minor);
+ "FT260 usb-i2c bridge");
mutex_init(&dev->lock);
init_completion(&dev->wait);
- ret = ft260_xfer_status(dev);
+ ret = ft260_xfer_status(dev, FT260_I2C_STATUS_BUS_BUSY);
if (ret)
ft260_i2c_reset(hdev);
@@ -1022,6 +1073,13 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
ft260_dbg("i2c resp: rep %#02x len %d\n", xfer->report,
xfer->length);
+ if ((dev->read_buf == NULL) ||
+ (xfer->length > dev->read_len - dev->read_idx)) {
+ hid_err(hdev, "unexpected report %#02x, length %d\n",
+ xfer->report, xfer->length);
+ return -1;
+ }
+
memcpy(&dev->read_buf[dev->read_idx], &xfer->data,
xfer->length);
dev->read_idx += xfer->length;
@@ -1030,10 +1088,9 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
complete(&dev->wait);
} else {
- hid_err(hdev, "unknown report: %#02x\n", xfer->report);
- return 0;
+ hid_err(hdev, "unhandled report %#02x\n", xfer->report);
}
- return 1;
+ return 0;
}
static struct hid_driver ft260_driver = {