diff options
Diffstat (limited to 'drivers/hwmon/pmbus/mp2975.c')
-rw-r--r-- | drivers/hwmon/pmbus/mp2975.c | 247 |
1 files changed, 214 insertions, 33 deletions
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index 6a97d46ea5e8..634369ebec43 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -35,6 +35,8 @@ #define MP2975_MFR_OVP_TH_SET 0xe5 #define MP2975_MFR_UVP_SET 0xe6 +#define MP2973_MFR_RESO_SET 0xc7 + #define MP2975_VOUT_FORMAT BIT(15) #define MP2975_VID_STEP_SEL_R1 BIT(4) #define MP2975_IMVP9_EN_R1 BIT(13) @@ -49,8 +51,32 @@ #define MP2975_SENSE_AMPL_HALF 2 #define MP2975_VIN_UV_LIMIT_UNIT 8 +#define MP2973_VOUT_FORMAT_R1 GENMASK(7, 6) +#define MP2973_VOUT_FORMAT_R2 GENMASK(4, 3) +#define MP2973_VOUT_FORMAT_DIRECT_R1 BIT(7) +#define MP2973_VOUT_FORMAT_LINEAR_R1 BIT(6) +#define MP2973_VOUT_FORMAT_DIRECT_R2 BIT(4) +#define MP2973_VOUT_FORMAT_LINEAR_R2 BIT(3) + +#define MP2973_MFR_VR_MULTI_CONFIG_R1 0x0d +#define MP2973_MFR_VR_MULTI_CONFIG_R2 0x1d +#define MP2973_VID_STEP_SEL_R1 BIT(4) +#define MP2973_IMVP9_EN_R1 BIT(14) +#define MP2973_VID_STEP_SEL_R2 BIT(3) +#define MP2973_IMVP9_EN_R2 BIT(13) + +#define MP2973_MFR_READ_IOUT_PK 0x90 +#define MP2973_MFR_READ_POUT_PK 0x91 + #define MP2975_MAX_PHASE_RAIL1 8 #define MP2975_MAX_PHASE_RAIL2 4 + +#define MP2973_MAX_PHASE_RAIL1 14 +#define MP2973_MAX_PHASE_RAIL2 6 + +#define MP2971_MAX_PHASE_RAIL1 8 +#define MP2971_MAX_PHASE_RAIL2 3 + #define MP2975_PAGE_NUM 2 #define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \ @@ -58,11 +84,13 @@ PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL) enum chips { - mp2975 + mp2971, mp2973, mp2975 }; static const int mp2975_max_phases[][MP2975_PAGE_NUM] = { [mp2975] = { MP2975_MAX_PHASE_RAIL1, MP2975_MAX_PHASE_RAIL2 }, + [mp2973] = { MP2973_MAX_PHASE_RAIL1, MP2973_MAX_PHASE_RAIL2 }, + [mp2971] = { MP2971_MAX_PHASE_RAIL1, MP2971_MAX_PHASE_RAIL2 }, }; struct mp2975_data { @@ -79,6 +107,8 @@ struct mp2975_data { }; static const struct i2c_device_id mp2975_id[] = { + {"mp2971", mp2971}, + {"mp2973", mp2973}, {"mp2975", mp2975}, {} }; @@ -215,6 +245,76 @@ mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data, return ret; } +static int mp2973_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2975_data *data = to_mp2975_data(info); + int ret; + + switch (reg) { + case PMBUS_OT_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * MP2971 and mp2973 only supports tracking (ovp1) mode. + */ + ret = mp2975_read_word_helper(client, page, phase, + MP2975_MFR_OVP_TH_SET, + GENMASK(2, 0)); + if (ret < 0) + return ret; + + ret = data->vout_max[page] + 50 * (ret + 1); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(8, 0)); + if (ret < 0) + return ret; + ret = mp2975_vid2direct(info->vrm_version[page], ret); + break; + case PMBUS_VIRT_READ_POUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_POUT_PK); + break; + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_IOUT_PK); + break; + case PMBUS_UT_WARN_LIMIT: + case PMBUS_UT_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_VOUT_OV_WARN_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_IIN_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_LV_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_UC_FAULT_LIMIT: + case PMBUS_POUT_OP_FAULT_LIMIT: + case PMBUS_POUT_OP_WARN_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + return -ENXIO; + default: + return -ENODATA; + } + + return ret; +} + static int mp2975_read_word_data(struct i2c_client *client, int page, int phase, int reg) { @@ -434,6 +534,35 @@ mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, MP2975_MFR_VR_MULTI_CONFIG_R2, 1, MP2975_IMVP9_EN_R2, MP2975_VID_STEP_SEL_R2); + + return ret; +} + +static int +mp2973_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, + struct pmbus_driver_info *info) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); + if (ret < 0) + return ret; + + /* Identify VID mode for rail 1. */ + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R1, 0, + MP2973_IMVP9_EN_R1, MP2973_VID_STEP_SEL_R1); + + if (ret < 0) + return ret; + + /* Identify VID mode for rail 2, if connected. */ + if (info->phases[1]) + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R2, 1, + MP2973_IMVP9_EN_R2, + MP2973_VID_STEP_SEL_R2); + return ret; } @@ -551,15 +680,32 @@ static int mp2975_set_vout_format(struct i2c_client *client, struct mp2975_data *data, int page) { - int ret; + int ret, i; - ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); - if (ret < 0) - return ret; /* Enable DIRECT VOUT format 1mV/LSB */ - if (ret & MP2975_VOUT_FORMAT) { - ret &= ~MP2975_VOUT_FORMAT; - ret = i2c_smbus_write_word_data(client, MP2975_MFR_DC_LOOP_CTRL, ret); + if (data->chip_id == mp2975) { + ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); + if (ret < 0) + return ret; + if (ret & MP2975_VOUT_FORMAT) { + ret &= ~MP2975_VOUT_FORMAT; + ret = i2c_smbus_write_word_data(client, MP2975_MFR_DC_LOOP_CTRL, ret); + } + } else { + ret = i2c_smbus_read_word_data(client, MP2973_MFR_RESO_SET); + if (ret < 0) + return ret; + i = ret; + + if (page == 0) { + i &= ~MP2973_VOUT_FORMAT_R1; + i |= MP2973_VOUT_FORMAT_DIRECT_R1; + } else { + i &= ~MP2973_VOUT_FORMAT_R2; + i |= MP2973_VOUT_FORMAT_DIRECT_R2; + } + if (i != ret) + ret = i2c_smbus_write_word_data(client, MP2973_MFR_RESO_SET, i); } return ret; } @@ -607,10 +753,10 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, for (i = 0; i < data->info.pages; i++) { ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); if (ret < 0) - return ret; + continue; - /* Obtain voltage reference offsets. */ - ret = mp2975_vref_offset_get(client, data, i); + /* Set VOUT format for READ_VOUT command : direct. */ + ret = mp2975_set_vout_format(client, data, i); if (ret < 0) return ret; @@ -619,8 +765,12 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, if (ret < 0) return ret; - /* Set VOUT format for READ_VOUT command : direct. */ - ret = mp2975_set_vout_format(client, data, i); + /* Skip if reading Vref is unsupported */ + if (data->chip_id != mp2975) + continue; + + /* Obtain voltage reference offsets. */ + ret = mp2975_vref_offset_get(client, data, i); if (ret < 0) return ret; @@ -658,6 +808,23 @@ static struct pmbus_driver_info mp2975_info = { .read_word_data = mp2975_read_word_data, }; +static struct pmbus_driver_info mp2973_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT, + .read_word_data = mp2973_read_word_data, +}; + static int mp2975_probe(struct i2c_client *client) { struct pmbus_driver_info *info; @@ -677,6 +844,11 @@ static int mp2975_probe(struct i2c_client *client) memcpy(data->max_phases, mp2975_max_phases[data->chip_id], sizeof(data->max_phases)); + if (data->chip_id == mp2975) + memcpy(&data->info, &mp2975_info, sizeof(*info)); + else + memcpy(&data->info, &mp2973_info, sizeof(*info)); + info = &data->info; /* Identify multiphase configuration for rail 2. */ @@ -691,30 +863,37 @@ static int mp2975_probe(struct i2c_client *client) data->info.func[1] = MP2975_RAIL2_FUNC; } - /* Identify multiphase configuration. */ - ret = mp2975_identify_multiphase(client, data, info); - if (ret) - return ret; + if (data->chip_id == mp2975) { + /* Identify multiphase configuration. */ + ret = mp2975_identify_multiphase(client, data, info); + if (ret) + return ret; - /* Identify VID setting per rail. */ - ret = mp2975_identify_rails_vid(client, data, info); - if (ret < 0) - return ret; + /* Identify VID setting per rail. */ + ret = mp2975_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; - /* Obtain current sense gain of power stage. */ - ret = mp2975_current_sense_gain_get(client, data); - if (ret) - return ret; + /* Obtain current sense gain of power stage. */ + ret = mp2975_current_sense_gain_get(client, data); + if (ret) + return ret; - /* Obtain voltage reference values. */ - ret = mp2975_vref_get(client, data, info); - if (ret) - return ret; + /* Obtain voltage reference values. */ + ret = mp2975_vref_get(client, data, info); + if (ret) + return ret; - /* Obtain vout over-voltage scales. */ - ret = mp2975_vout_ov_scale_get(client, data, info); - if (ret < 0) - return ret; + /* Obtain vout over-voltage scales. */ + ret = mp2975_vout_ov_scale_get(client, data, info); + if (ret < 0) + return ret; + } else { + /* Identify VID setting per rail. */ + ret = mp2973_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; + } /* Obtain offsets, maximum and format for vout. */ ret = mp2975_vout_per_rail_config_get(client, data, info); @@ -725,6 +904,8 @@ static int mp2975_probe(struct i2c_client *client) } static const struct of_device_id __maybe_unused mp2975_of_match[] = { + {.compatible = "mps,mp2971", .data = (void *)mp2971}, + {.compatible = "mps,mp2973", .data = (void *)mp2973}, {.compatible = "mps,mp2975", .data = (void *)mp2975}, {} }; |