diff options
Diffstat (limited to 'drivers/hwmon/sch5627.c')
| -rw-r--r-- | drivers/hwmon/sch5627.c | 267 |
1 files changed, 194 insertions, 73 deletions
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 1bbda3b05532..1891d4d75aa9 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -6,9 +6,13 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/bits.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/mod_devicetable.h> +#include <linux/pm.h> #include <linux/init.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/platform_device.h> @@ -32,6 +36,10 @@ #define SCH5627_REG_PRIMARY_ID 0x3f #define SCH5627_REG_CTRL 0x40 +#define SCH5627_CTRL_START BIT(0) +#define SCH5627_CTRL_LOCK BIT(1) +#define SCH5627_CTRL_VBAT BIT(4) + #define SCH5627_NO_TEMPS 8 #define SCH5627_NO_FANS 4 #define SCH5627_NO_IN 5 @@ -67,11 +75,9 @@ static const char * const SCH5627_IN_LABELS[SCH5627_NO_IN] = { "VCC", "VTT", "VBAT", "VTR", "V_IN" }; struct sch5627_data { + struct regmap *regmap; unsigned short addr; u8 control; - u8 temp_max[SCH5627_NO_TEMPS]; - u8 temp_crit[SCH5627_NO_TEMPS]; - u16 fan_min[SCH5627_NO_FANS]; struct mutex update_lock; unsigned long last_battery; /* In jiffies */ @@ -86,6 +92,36 @@ struct sch5627_data { u16 in[SCH5627_NO_IN]; }; +static const struct regmap_range sch5627_tunables_ranges[] = { + regmap_reg_range(0x57, 0x57), + regmap_reg_range(0x59, 0x59), + regmap_reg_range(0x5B, 0x5B), + regmap_reg_range(0x5D, 0x5D), + regmap_reg_range(0x5F, 0x5F), + regmap_reg_range(0x61, 0x69), + regmap_reg_range(0x96, 0x9B), + regmap_reg_range(0xA0, 0xA3), + regmap_reg_range(0x184, 0x184), + regmap_reg_range(0x186, 0x186), + regmap_reg_range(0x1A8, 0x1A9), +}; + +static const struct regmap_access_table sch5627_tunables_table = { + .yes_ranges = sch5627_tunables_ranges, + .n_yes_ranges = ARRAY_SIZE(sch5627_tunables_ranges), +}; + +static const struct regmap_config sch5627_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .wr_table = &sch5627_tunables_table, + .rd_table = &sch5627_tunables_table, + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, + .can_sleep = true, +}; + static int sch5627_update_temp(struct sch5627_data *data) { int ret = 0; @@ -147,7 +183,8 @@ static int sch5627_update_in(struct sch5627_data *data) /* Trigger a Vbat voltage measurement every 5 minutes */ if (time_after(jiffies, data->last_battery + 300 * HZ)) { - sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | 0x10); + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, + data->control | SCH5627_CTRL_VBAT); data->last_battery = jiffies; } @@ -171,38 +208,6 @@ abort: return ret; } -static int sch5627_read_limits(struct sch5627_data *data) -{ - int i, val; - - for (i = 0; i < SCH5627_NO_TEMPS; i++) { - /* - * Note what SMSC calls ABS, is what lm_sensors calls max - * (aka high), and HIGH is what lm_sensors calls crit. - */ - val = sch56xx_read_virtual_reg(data->addr, - SCH5627_REG_TEMP_ABS[i]); - if (val < 0) - return val; - data->temp_max[i] = val; - - val = sch56xx_read_virtual_reg(data->addr, - SCH5627_REG_TEMP_HIGH[i]); - if (val < 0) - return val; - data->temp_crit[i] = val; - } - for (i = 0; i < SCH5627_NO_FANS; i++) { - val = sch56xx_read_virtual_reg16(data->addr, - SCH5627_REG_FAN_MIN[i]); - if (val < 0) - return val; - data->fan_min[i] = val; - } - - return 0; -} - static int reg_to_temp(u16 reg) { return (reg * 625) / 10 - 64000; @@ -223,11 +228,65 @@ static int reg_to_rpm(u16 reg) return 5400540 / reg; } +static u8 sch5627_temp_limit_to_reg(long value) +{ + long limit = (value / 1000) + 64; + + return clamp_val(limit, 0, U8_MAX); +} + +static u16 sch5627_rpm_to_reg(long value) +{ + long pulses; + + if (value <= 0) + return U16_MAX - 1; + + pulses = 5400540 / value; + + return clamp_val(pulses, 1, U16_MAX - 1); +} + static umode_t sch5627_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr, int channel) { - if (type == hwmon_pwm && attr == hwmon_pwm_auto_channels_temp) - return 0644; + const struct sch5627_data *data = drvdata; + + /* Once the lock bit is set, the virtual registers become read-only + * until the next power cycle. + */ + if (data->control & SCH5627_CTRL_LOCK) + return 0444; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_max: + case hwmon_temp_crit: + return 0644; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_min: + return 0644; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_auto_channels_temp: + return 0644; + default: + break; + } + break; + default: + break; + } return 0444; } @@ -236,24 +295,37 @@ static int sch5627_read(struct device *dev, enum hwmon_sensor_types type, u32 at long *val) { struct sch5627_data *data = dev_get_drvdata(dev); - int ret; + int ret, value; switch (type) { case hwmon_temp: - ret = sch5627_update_temp(data); - if (ret < 0) - return ret; switch (attr) { case hwmon_temp_input: + ret = sch5627_update_temp(data); + if (ret < 0) + return ret; + *val = reg_to_temp(data->temp[channel]); return 0; case hwmon_temp_max: - *val = reg_to_temp_limit(data->temp_max[channel]); + ret = regmap_read(data->regmap, SCH5627_REG_TEMP_ABS[channel], &value); + if (ret < 0) + return ret; + + *val = reg_to_temp_limit((u8)value); return 0; case hwmon_temp_crit: - *val = reg_to_temp_limit(data->temp_crit[channel]); + ret = regmap_read(data->regmap, SCH5627_REG_TEMP_HIGH[channel], &value); + if (ret < 0) + return ret; + + *val = reg_to_temp_limit((u8)value); return 0; case hwmon_temp_fault: + ret = sch5627_update_temp(data); + if (ret < 0) + return ret; + *val = (data->temp[channel] == 0); return 0; default: @@ -261,23 +333,35 @@ static int sch5627_read(struct device *dev, enum hwmon_sensor_types type, u32 at } break; case hwmon_fan: - ret = sch5627_update_fan(data); - if (ret < 0) - return ret; switch (attr) { case hwmon_fan_input: + ret = sch5627_update_fan(data); + if (ret < 0) + return ret; + ret = reg_to_rpm(data->fan[channel]); if (ret < 0) return ret; + *val = ret; return 0; case hwmon_fan_min: - ret = reg_to_rpm(data->fan_min[channel]); + ret = sch56xx_regmap_read16(data->regmap, SCH5627_REG_FAN_MIN[channel], + &value); if (ret < 0) return ret; + + ret = reg_to_rpm((u16)value); + if (ret < 0) + return ret; + *val = ret; return 0; case hwmon_fan_fault: + ret = sch5627_update_fan(data); + if (ret < 0) + return ret; + *val = (data->fan[channel] == 0xffff); return 0; default: @@ -287,15 +371,11 @@ static int sch5627_read(struct device *dev, enum hwmon_sensor_types type, u32 at case hwmon_pwm: switch (attr) { case hwmon_pwm_auto_channels_temp: - mutex_lock(&data->update_lock); - ret = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PWM_MAP[channel]); - mutex_unlock(&data->update_lock); - + ret = regmap_read(data->regmap, SCH5627_REG_PWM_MAP[channel], &value); if (ret < 0) return ret; - *val = ret; - + *val = value; return 0; default: break; @@ -345,9 +425,33 @@ static int sch5627_write(struct device *dev, enum hwmon_sensor_types type, u32 a long val) { struct sch5627_data *data = dev_get_drvdata(dev); - int ret; + u16 fan; + u8 temp; switch (type) { + case hwmon_temp: + temp = sch5627_temp_limit_to_reg(val); + + switch (attr) { + case hwmon_temp_max: + return regmap_write(data->regmap, SCH5627_REG_TEMP_ABS[channel], temp); + case hwmon_temp_crit: + return regmap_write(data->regmap, SCH5627_REG_TEMP_HIGH[channel], temp); + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_min: + fan = sch5627_rpm_to_reg(val); + + return sch56xx_regmap_write16(data->regmap, SCH5627_REG_FAN_MIN[channel], + fan); + default: + break; + } + break; case hwmon_pwm: switch (attr) { case hwmon_pwm_auto_channels_temp: @@ -355,12 +459,7 @@ static int sch5627_write(struct device *dev, enum hwmon_sensor_types type, u32 a if (val > U8_MAX || val < 0) return -EINVAL; - mutex_lock(&data->update_lock); - ret = sch56xx_write_virtual_reg(data->addr, SCH5627_REG_PWM_MAP[channel], - val); - mutex_unlock(&data->update_lock); - - return ret; + return regmap_write(data->regmap, SCH5627_REG_PWM_MAP[channel], val); default: break; } @@ -422,7 +521,7 @@ static int sch5627_probe(struct platform_device *pdev) { struct sch5627_data *data; struct device *hwmon_dev; - int err, build_code, build_id, hwmon_rev, val; + int build_code, build_id, hwmon_rev, val; data = devm_kzalloc(&pdev->dev, sizeof(struct sch5627_data), GFP_KERNEL); @@ -483,24 +582,21 @@ static int sch5627_probe(struct platform_device *pdev) return val; data->control = val; - if (!(data->control & 0x01)) { + if (!(data->control & SCH5627_CTRL_START)) { pr_err("hardware monitoring not enabled\n"); return -ENODEV; } + + data->regmap = devm_regmap_init_sch56xx(&pdev->dev, &data->update_lock, data->addr, + &sch5627_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ - sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, - data->control | 0x10); + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | SCH5627_CTRL_VBAT); data->last_battery = jiffies; - /* - * Read limits, we do this only once as reading a register on - * the sch5627 is quite expensive (and they don't change). - */ - err = sch5627_read_limits(data); - if (err) - return err; - pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", build_code, build_id, hwmon_rev); @@ -518,6 +614,30 @@ static int sch5627_probe(struct platform_device *pdev) return 0; } +static int sch5627_suspend(struct device *dev) +{ + struct sch5627_data *data = dev_get_drvdata(dev); + + regcache_cache_only(data->regmap, true); + regcache_mark_dirty(data->regmap); + + return 0; +} + +static int sch5627_resume(struct device *dev) +{ + struct sch5627_data *data = dev_get_drvdata(dev); + + regcache_cache_only(data->regmap, false); + /* We must not access the virtual registers when the lock bit is set */ + if (data->control & SCH5627_CTRL_LOCK) + return regcache_drop_region(data->regmap, 0, U16_MAX); + + return regcache_sync(data->regmap); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(sch5627_dev_pm_ops, sch5627_suspend, sch5627_resume); + static const struct platform_device_id sch5627_device_id[] = { { .name = "sch5627", @@ -529,6 +649,7 @@ MODULE_DEVICE_TABLE(platform, sch5627_device_id); static struct platform_driver sch5627_driver = { .driver = { .name = DRVNAME, + .pm = pm_sleep_ptr(&sch5627_dev_pm_ops), }, .probe = sch5627_probe, .id_table = sch5627_device_id, |