diff options
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/Kconfig | 5 | ||||
-rw-r--r-- | drivers/hwmon/w83627ehf.c | 477 |
2 files changed, 41 insertions, 441 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 54e1b9cbc0b9..e6e1b1008cdd 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1915,7 +1915,7 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" + tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" depends on !PPC select HWMON_VID help @@ -1928,8 +1928,7 @@ config SENSORS_W83627EHF the Core 2 Duo. And also the W83627UHG, which is a stripped down version of the W83627DHG (as far as hardware monitoring goes.) - This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F - (also known as W83667HG-I), and NCT6776F. + This driver also supports Nuvoton W83667HG and W83667HG-B. This driver can also be built as a module. If so, the module will be called w83627ehf. diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 0a13f6b971f7..47edca0ffe53 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -28,8 +28,6 @@ * w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 * w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 * w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 - * nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3 - * nct6776f 9 5 3 9 0xC330 0xc1 0x5ca3 */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -50,7 +48,7 @@ enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83627uhg, - w83667hg, w83667hg_b, nct6775, nct6776, + w83667hg, w83667hg_b, }; /* used to set data->name = w83627ehf_device_names[data->sio_kind] */ @@ -61,8 +59,6 @@ static const char * const w83627ehf_device_names[] = { "w83627uhg", "w83667hg", "w83667hg", - "nct6775", - "nct6776", }; static unsigned short force_id; @@ -97,8 +93,6 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define SIO_W83627UHG_ID 0xa230 #define SIO_W83667HG_ID 0xa510 #define SIO_W83667HG_B_ID 0xb350 -#define SIO_NCT6775_ID 0xb470 -#define SIO_NCT6776_ID 0xc330 #define SIO_ID_MASK 0xFFF0 static inline void @@ -187,11 +181,6 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 }; #define W83627EHF_REG_DIODE 0x59 #define W83627EHF_REG_SMI_OVT 0x4C -/* NCT6775F has its own fan divider registers */ -#define NCT6775_REG_FANDIV1 0x506 -#define NCT6775_REG_FANDIV2 0x507 -#define NCT6775_REG_FAN_DEBOUNCE 0xf0 - #define W83627EHF_REG_ALARM1 0x459 #define W83627EHF_REG_ALARM2 0x45A #define W83627EHF_REG_ALARM3 0x45B @@ -235,28 +224,6 @@ static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; -static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301 }; -static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302 }; -static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305 }; -static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306 }; -static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307 }; -static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309 }; -static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a }; -static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b }; -static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; -static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642}; - -static const u16 NCT6775_REG_TEMP[] - = { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d }; -static const u16 NCT6775_REG_TEMP_CONFIG[] - = { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A }; -static const u16 NCT6775_REG_TEMP_HYST[] - = { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D }; -static const u16 NCT6775_REG_TEMP_OVER[] - = { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C }; -static const u16 NCT6775_REG_TEMP_SOURCE[] - = { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 }; - static const char *const w83667hg_b_temp_label[] = { "SYSTIN", "CPUTIN", @@ -268,57 +235,7 @@ static const char *const w83667hg_b_temp_label[] = { "PECI Agent 4" }; -static const char *const nct6775_temp_label[] = { - "", - "SYSTIN", - "CPUTIN", - "AUXTIN", - "AMD SB-TSI", - "PECI Agent 0", - "PECI Agent 1", - "PECI Agent 2", - "PECI Agent 3", - "PECI Agent 4", - "PECI Agent 5", - "PECI Agent 6", - "PECI Agent 7", - "PCH_CHIP_CPU_MAX_TEMP", - "PCH_CHIP_TEMP", - "PCH_CPU_TEMP", - "PCH_MCH_TEMP", - "PCH_DIM0_TEMP", - "PCH_DIM1_TEMP", - "PCH_DIM2_TEMP", - "PCH_DIM3_TEMP" -}; - -static const char *const nct6776_temp_label[] = { - "", - "SYSTIN", - "CPUTIN", - "AUXTIN", - "SMBUSMASTER 0", - "SMBUSMASTER 1", - "SMBUSMASTER 2", - "SMBUSMASTER 3", - "SMBUSMASTER 4", - "SMBUSMASTER 5", - "SMBUSMASTER 6", - "SMBUSMASTER 7", - "PECI Agent 0", - "PECI Agent 1", - "PCH_CHIP_CPU_MAX_TEMP", - "PCH_CHIP_TEMP", - "PCH_CPU_TEMP", - "PCH_MCH_TEMP", - "PCH_DIM0_TEMP", - "PCH_DIM1_TEMP", - "PCH_DIM2_TEMP", - "PCH_DIM3_TEMP", - "BYTE_TEMP" -}; - -#define NUM_REG_TEMP ARRAY_SIZE(NCT6775_REG_TEMP) +#define NUM_REG_TEMP ARRAY_SIZE(W83627EHF_REG_TEMP) static int is_word_sized(u16 reg) { @@ -358,31 +275,6 @@ static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) return 1350000U / (reg << divreg); } -static unsigned int fan_from_reg13(u16 reg, unsigned int divreg) -{ - if ((reg & 0xff1f) == 0xff1f) - return 0; - - reg = (reg & 0x1f) | ((reg & 0xff00) >> 3); - - if (reg == 0) - return 0; - - return 1350000U / reg; -} - -static unsigned int fan_from_reg16(u16 reg, unsigned int divreg) -{ - if (reg == 0 || reg == 0xffff) - return 0; - - /* - * Even though the registers are 16 bit wide, the fan divisor - * still applies. - */ - return 1350000U / (reg << divreg); -} - static inline unsigned int div_from_reg(u8 reg) { @@ -585,35 +477,6 @@ static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg, } /* This function assumes that the caller holds data->update_lock */ -static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr) -{ - u8 reg; - - switch (nr) { - case 0: - reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x70) - | (data->fan_div[0] & 0x7); - w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg); - break; - case 1: - reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x7) - | ((data->fan_div[1] << 4) & 0x70); - w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg); - break; - case 2: - reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x70) - | (data->fan_div[2] & 0x7); - w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg); - break; - case 3: - reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x7) - | ((data->fan_div[3] << 4) & 0x70); - w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg); - break; - } -} - -/* This function assumes that the caller holds data->update_lock */ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) { u8 reg; @@ -667,25 +530,7 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) static void w83627ehf_write_fan_div_common(struct device *dev, struct w83627ehf_data *data, int nr) { - if (data->kind == nct6776) - ; /* no dividers, do nothing */ - else if (data->kind == nct6775) - nct6775_write_fan_div(data, nr); - else - w83627ehf_write_fan_div(data, nr); -} - -static void nct6775_update_fan_div(struct w83627ehf_data *data) -{ - u8 i; - - i = w83627ehf_read_value(data, NCT6775_REG_FANDIV1); - data->fan_div[0] = i & 0x7; - data->fan_div[1] = (i & 0x70) >> 4; - i = w83627ehf_read_value(data, NCT6775_REG_FANDIV2); - data->fan_div[2] = i & 0x7; - if (data->has_fan & (1<<3)) - data->fan_div[3] = (i & 0x70) >> 4; + w83627ehf_write_fan_div(data, nr); } static void w83627ehf_update_fan_div(struct w83627ehf_data *data) @@ -716,30 +561,7 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data) static void w83627ehf_update_fan_div_common(struct device *dev, struct w83627ehf_data *data) { - if (data->kind == nct6776) - ; /* no dividers, do nothing */ - else if (data->kind == nct6775) - nct6775_update_fan_div(data); - else - w83627ehf_update_fan_div(data); -} - -static void nct6775_update_pwm(struct w83627ehf_data *data) -{ - int i; - int pwmcfg, fanmodecfg; - - for (i = 0; i < data->pwm_num; i++) { - pwmcfg = w83627ehf_read_value(data, - W83627EHF_REG_PWM_ENABLE[i]); - fanmodecfg = w83627ehf_read_value(data, - NCT6775_REG_FAN_MODE[i]); - data->pwm_mode[i] = - ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; - data->pwm_enable[i] = ((fanmodecfg >> 4) & 7) + 1; - data->tolerance[i] = fanmodecfg & 0x0f; - data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]); - } + w83627ehf_update_fan_div(data); } static void w83627ehf_update_pwm(struct w83627ehf_data *data) @@ -771,18 +593,12 @@ static void w83627ehf_update_pwm(struct w83627ehf_data *data) static void w83627ehf_update_pwm_common(struct device *dev, struct w83627ehf_data *data) { - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); - - if (sio_data->kind == nct6775 || sio_data->kind == nct6776) - nct6775_update_pwm(data); - else - w83627ehf_update_pwm(data); + w83627ehf_update_pwm(data); } static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { struct w83627ehf_data *data = dev_get_drvdata(dev); - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); int i; mutex_lock(&data->update_lock); @@ -826,8 +642,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) * time */ if (data->has_fan_div - && (reg >= 0xff || (sio_data->kind == nct6775 - && reg == 0x00)) + && reg >= 0xff && data->fan_div[i] < 0x07) { dev_dbg(dev, "Increasing fan%d clock divider from %u to %u\n", @@ -1061,10 +876,6 @@ store_pwm_mode(struct device *dev, struct w83627ehf_data *data, int channel, if (val < 0 || val > 1) return -EINVAL; - /* On NCT67766F, DC mode is only supported for pwm1 */ - if (data->kind == nct6776 && channel && val != 1) - return -EINVAL; - mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[channel]); data->pwm_mode[channel] = val; @@ -1098,27 +909,15 @@ store_pwm_enable(struct device *dev, struct w83627ehf_data *data, int channel, if (!val || val < 0 || (val > 4 && val != data->pwm_enable_orig[channel])) return -EINVAL; - /* SmartFan III mode is not supported on NCT6776F */ - if (data->kind == nct6776 && val == 4) - return -EINVAL; mutex_lock(&data->update_lock); data->pwm_enable[channel] = val; - if (data->kind == nct6775 || data->kind == nct6776) { - reg = w83627ehf_read_value(data, - NCT6775_REG_FAN_MODE[channel]); - reg &= 0x0f; - reg |= (val - 1) << 4; - w83627ehf_write_value(data, - NCT6775_REG_FAN_MODE[channel], reg); - } else { - reg = w83627ehf_read_value(data, - W83627EHF_REG_PWM_ENABLE[channel]); - reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]); - reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel]; - w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], - reg); - } + reg = w83627ehf_read_value(data, + W83627EHF_REG_PWM_ENABLE[channel]); + reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]); + reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel]; + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], + reg); mutex_unlock(&data->update_lock); return 0; } @@ -1179,21 +978,12 @@ store_tolerance(struct device *dev, struct device_attribute *attr, val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15); mutex_lock(&data->update_lock); - if (data->kind == nct6775 || data->kind == nct6776) { - /* Limit tolerance further for NCT6776F */ - if (data->kind == nct6776 && val > 7) - val = 7; - reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]); + reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); + if (nr == 1) + reg = (reg & 0x0f) | (val << 4); + else reg = (reg & 0xf0) | val; - w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg); - } else { - reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); - if (nr == 1) - reg = (reg & 0x0f) | (val << 4); - else - reg = (reg & 0xf0) | val; - w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); - } + w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); data->tolerance[nr] = val; mutex_unlock(&data->update_lock); return count; @@ -1541,16 +1331,6 @@ static inline void w83627ehf_init_device(struct w83627ehf_data *data, } } -static void w82627ehf_swap_tempreg(struct w83627ehf_data *data, - int r1, int r2) -{ - swap(data->temp_src[r1], data->temp_src[r2]); - swap(data->reg_temp[r1], data->reg_temp[r2]); - swap(data->reg_temp_over[r1], data->reg_temp_over[r2]); - swap(data->reg_temp_hyst[r1], data->reg_temp_hyst[r2]); - swap(data->reg_temp_config[r1], data->reg_temp_config[r2]); -} - static void w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp) { @@ -1578,35 +1358,7 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, } /* fan4 and fan5 share some pins with the GPIO and serial flash */ - if (sio_data->kind == nct6775) { - /* On NCT6775, fan4 shares pins with the fdc interface */ - fan3pin = 1; - fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80); - fan4min = 0; - fan5pin = 0; - } else if (sio_data->kind == nct6776) { - bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80; - - superio_select(sio_data->sioreg, W83627EHF_LD_HWM); - regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE); - - if (regval & 0x80) - fan3pin = gpok; - else - fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40); - - if (regval & 0x40) - fan4pin = gpok; - else - fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01); - - if (regval & 0x20) - fan5pin = gpok; - else - fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02); - - fan4min = fan4pin; - } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { + if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { fan3pin = 1; fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40; fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20; @@ -1622,30 +1374,21 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, data->has_fan |= (fan3pin << 2); data->has_fan_min |= (fan3pin << 2); - if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { - /* - * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 - * register - */ - data->has_fan |= (fan4pin << 3) | (fan5pin << 4); - data->has_fan_min |= (fan4min << 3) | (fan5pin << 4); - } else { - /* - * It looks like fan4 and fan5 pins can be alternatively used - * as fan on/off switches, but fan5 control is write only :/ - * We assume that if the serial interface is disabled, designers - * connected fan5 as input unless they are emitting log 1, which - * is not the default. - */ - regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); - if ((regval & (1 << 2)) && fan4pin) { - data->has_fan |= (1 << 3); - data->has_fan_min |= (1 << 3); - } - if (!(regval & (1 << 1)) && fan5pin) { - data->has_fan |= (1 << 4); - data->has_fan_min |= (1 << 4); - } + /* + * It looks like fan4 and fan5 pins can be alternatively used + * as fan on/off switches, but fan5 control is write only :/ + * We assume that if the serial interface is disabled, designers + * connected fan5 as input unless they are emitting log 1, which + * is not the default. + */ + regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); + if ((regval & (1 << 2)) && fan4pin) { + data->has_fan |= (1 << 3); + data->has_fan_min |= (1 << 3); + } + if (!(regval & (1 << 1)) && fan5pin) { + data->has_fan |= (1 << 4); + data->has_fan_min |= (1 << 4); } } @@ -1695,10 +1438,7 @@ w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type, if (attr == hwmon_fan_input || attr == hwmon_fan_alarm) return 0444; if (attr == hwmon_fan_div) { - if (data->kind != nct6776) - return 0444; - else - return 0; + return 0444; } if (attr == hwmon_fan_min) { if (data->has_fan_min & (1 << channel)) @@ -1731,8 +1471,7 @@ w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type, break; case hwmon_intrusion: - if (channel == 0 || - (channel == 1 && data->kind == nct6776)) + if (channel == 0) return 0644; return 0; @@ -2048,15 +1787,13 @@ static int w83627ehf_probe(struct platform_device *pdev) /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9; - /* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */ + /* 667HG has 3 pwms, and 627UHG has only 2 */ switch (sio_data->kind) { default: data->pwm_num = 4; break; case w83667hg: case w83667hg_b: - case nct6775: - case nct6776: data->pwm_num = 3; break; case w83627uhg: @@ -2068,83 +1805,7 @@ static int w83627ehf_probe(struct platform_device *pdev) data->have_temp = 0x07; /* Deal with temperature register setup first. */ - if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { - int mask = 0; - - /* - * Display temperature sensor output only if it monitors - * a source other than one already reported. Always display - * first three temperature registers, though. - */ - for (i = 0; i < NUM_REG_TEMP; i++) { - u8 src; - - data->reg_temp[i] = NCT6775_REG_TEMP[i]; - data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i]; - data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i]; - data->reg_temp_config[i] = NCT6775_REG_TEMP_CONFIG[i]; - - src = w83627ehf_read_value(data, - NCT6775_REG_TEMP_SOURCE[i]); - src &= 0x1f; - if (src && !(mask & (1 << src))) { - data->have_temp |= 1 << i; - mask |= 1 << src; - } - - data->temp_src[i] = src; - - /* - * Now do some register swapping if index 0..2 don't - * point to SYSTIN(1), CPUIN(2), and AUXIN(3). - * Idea is to have the first three attributes - * report SYSTIN, CPUIN, and AUXIN if possible - * without overriding the basic system configuration. - */ - if (i > 0 && data->temp_src[0] != 1 - && data->temp_src[i] == 1) - w82627ehf_swap_tempreg(data, 0, i); - if (i > 1 && data->temp_src[1] != 2 - && data->temp_src[i] == 2) - w82627ehf_swap_tempreg(data, 1, i); - if (i > 2 && data->temp_src[2] != 3 - && data->temp_src[i] == 3) - w82627ehf_swap_tempreg(data, 2, i); - } - if (sio_data->kind == nct6776) { - /* - * On NCT6776, AUXTIN and VIN3 pins are shared. - * Only way to detect it is to check if AUXTIN is used - * as a temperature source, and if that source is - * enabled. - * - * If that is the case, disable in6, which reports VIN3. - * Otherwise disable temp3. - */ - if (data->temp_src[2] == 3) { - u8 reg; - - if (data->reg_temp_config[2]) - reg = w83627ehf_read_value(data, - data->reg_temp_config[2]); - else - reg = 0; /* Assume AUXTIN is used */ - - if (reg & 0x01) - data->have_temp &= ~(1 << 2); - else - data->in6_skip = 1; - } - data->temp_label = nct6776_temp_label; - } else { - data->temp_label = nct6775_temp_label; - } - data->have_temp_offset = data->have_temp & 0x07; - for (i = 0; i < 3; i++) { - if (data->temp_src[i] > 3) - data->have_temp_offset &= ~(1 << i); - } - } else if (sio_data->kind == w83667hg_b) { + if (sio_data->kind == w83667hg_b) { u8 reg; w83627ehf_set_temp_reg_ehf(data, 4); @@ -2254,31 +1915,7 @@ static int w83627ehf_probe(struct platform_device *pdev) data->have_temp_offset = data->have_temp & 0x07; } - if (sio_data->kind == nct6775) { - data->has_fan_div = true; - data->fan_from_reg = fan_from_reg16; - data->fan_from_reg_min = fan_from_reg8; - data->REG_PWM = NCT6775_REG_PWM; - data->REG_TARGET = NCT6775_REG_TARGET; - data->REG_FAN = NCT6775_REG_FAN; - data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; - data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT; - data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT; - data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME; - data->REG_FAN_MAX_OUTPUT = NCT6775_REG_FAN_MAX_OUTPUT; - data->REG_FAN_STEP_OUTPUT = NCT6775_REG_FAN_STEP_OUTPUT; - } else if (sio_data->kind == nct6776) { - data->has_fan_div = false; - data->fan_from_reg = fan_from_reg13; - data->fan_from_reg_min = fan_from_reg13; - data->REG_PWM = NCT6775_REG_PWM; - data->REG_TARGET = NCT6775_REG_TARGET; - data->REG_FAN = NCT6775_REG_FAN; - data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; - data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT; - data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT; - data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME; - } else if (sio_data->kind == w83667hg_b) { + if (sio_data->kind == w83667hg_b) { data->has_fan_div = true; data->fan_from_reg = fan_from_reg8; data->fan_from_reg_min = fan_from_reg8; @@ -2326,8 +1963,7 @@ static int w83627ehf_probe(struct platform_device *pdev) goto exit_release; /* Read VID value */ - if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b || - sio_data->kind == nct6775 || sio_data->kind == nct6776) { + if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { /* * W83667HG has different pins for VID input and output, so * we can get the VID input values directly at logical device D @@ -2376,21 +2012,6 @@ static int w83627ehf_probe(struct platform_device *pdev) } } - if (fan_debounce && - (sio_data->kind == nct6775 || sio_data->kind == nct6776)) { - u8 tmp; - - superio_select(sio_data->sioreg, W83627EHF_LD_HWM); - tmp = superio_inb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE); - if (sio_data->kind == nct6776) - superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE, - 0x3e | tmp); - else - superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE, - 0x1e | tmp); - pr_info("Enabled fan debounce for chip %s\n", data->name); - } - w83627ehf_check_fan_inputs(sio_data, data); superio_exit(sio_data->sioreg); @@ -2430,14 +2051,9 @@ static int w83627ehf_remove(struct platform_device *pdev) static int w83627ehf_suspend(struct device *dev) { struct w83627ehf_data *data = w83627ehf_update_device(dev); - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); mutex_lock(&data->update_lock); data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT); - if (sio_data->kind == nct6775) { - data->fandiv1 = w83627ehf_read_value(data, NCT6775_REG_FANDIV1); - data->fandiv2 = w83627ehf_read_value(data, NCT6775_REG_FANDIV2); - } mutex_unlock(&data->update_lock); return 0; @@ -2446,7 +2062,6 @@ static int w83627ehf_suspend(struct device *dev) static int w83627ehf_resume(struct device *dev) { struct w83627ehf_data *data = dev_get_drvdata(dev); - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); int i; mutex_lock(&data->update_lock); @@ -2491,10 +2106,6 @@ static int w83627ehf_resume(struct device *dev) /* Restore other settings */ w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat); - if (sio_data->kind == nct6775) { - w83627ehf_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); - w83627ehf_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); - } /* Force re-reading all values */ data->valid = 0; @@ -2535,8 +2146,6 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, static const char sio_name_W83627UHG[] __initconst = "W83627UHG"; static const char sio_name_W83667HG[] __initconst = "W83667HG"; static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B"; - static const char sio_name_NCT6775[] __initconst = "NCT6775F"; - static const char sio_name_NCT6776[] __initconst = "NCT6776F"; u16 val; const char *sio_name; @@ -2580,14 +2189,6 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, sio_data->kind = w83667hg_b; sio_name = sio_name_W83667HG_B; break; - case SIO_NCT6775_ID: - sio_data->kind = nct6775; - sio_name = sio_name_NCT6775; - break; - case SIO_NCT6776_ID: - sio_data->kind = nct6776; - sio_name = sio_name_NCT6776; - break; default: if (val != 0xffff) pr_debug("unsupported chip ID: 0x%04x\n", val); |