diff options
Diffstat (limited to 'drivers/hwtracing/coresight/ultrasoc-smb.h')
| -rw-r--r-- | drivers/hwtracing/coresight/ultrasoc-smb.h | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h new file mode 100644 index 000000000000..7dfbe42e37a0 --- /dev/null +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Siemens System Memory Buffer driver. + * Copyright(c) 2022, HiSilicon Limited. + */ + +#ifndef _ULTRASOC_SMB_H +#define _ULTRASOC_SMB_H + +#include <linux/miscdevice.h> +#include <linux/mutex.h> + +/* Offset of SMB global registers */ +#define SMB_GLB_CFG_REG 0x00 +#define SMB_GLB_EN_REG 0x04 +#define SMB_GLB_INT_REG 0x08 + +/* Offset of SMB logical buffer registers */ +#define SMB_LB_CFG_LO_REG 0x40 +#define SMB_LB_CFG_HI_REG 0x44 +#define SMB_LB_INT_CTRL_REG 0x48 +#define SMB_LB_INT_STS_REG 0x4c +#define SMB_LB_RD_ADDR_REG 0x5c +#define SMB_LB_WR_ADDR_REG 0x60 +#define SMB_LB_PURGE_REG 0x64 + +/* Set global config register */ +#define SMB_GLB_CFG_BURST_LEN_MSK GENMASK(11, 4) +#define SMB_GLB_CFG_IDLE_PRD_MSK GENMASK(15, 12) +#define SMB_GLB_CFG_MEM_WR_MSK GENMASK(21, 16) +#define SMB_GLB_CFG_MEM_RD_MSK GENMASK(27, 22) +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_GLB_CFG_BURST_LEN_MSK, 0xf) | \ + FIELD_PREP(SMB_GLB_CFG_IDLE_PRD_MSK, 0xf) | \ + FIELD_PREP(SMB_GLB_CFG_MEM_WR_MSK, 0x3) | \ + FIELD_PREP(SMB_GLB_CFG_MEM_RD_MSK, 0x1b)) + +#define SMB_GLB_EN_HW_ENABLE BIT(0) + +/* Set global interrupt control register */ +#define SMB_GLB_INT_EN BIT(0) +#define SMB_GLB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */ +#define SMB_GLB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */ +#define SMB_GLB_INT_CFG (SMB_GLB_INT_EN | SMB_GLB_INT_PULSE | \ + SMB_GLB_INT_ACT_H) + +/* Set logical buffer config register lower 32 bits */ +#define SMB_LB_CFG_LO_EN BIT(0) +#define SMB_LB_CFG_LO_SINGLE_END BIT(1) +#define SMB_LB_CFG_LO_INIT BIT(8) +#define SMB_LB_CFG_LO_CONT BIT(11) +#define SMB_LB_CFG_LO_FLOW_MSK GENMASK(19, 16) +#define SMB_LB_CFG_LO_DEFAULT (SMB_LB_CFG_LO_EN | SMB_LB_CFG_LO_SINGLE_END | \ + SMB_LB_CFG_LO_INIT | SMB_LB_CFG_LO_CONT | \ + FIELD_PREP(SMB_LB_CFG_LO_FLOW_MSK, 0xf)) + +/* Set logical buffer config register upper 32 bits */ +#define SMB_LB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8) +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_LB_CFG_HI_RANGE_UP_MSK, 0xff) + +/* + * Set logical buffer interrupt control register. + * The register control the validity of both real-time events and + * interrupts. When logical buffer status changes causes to issue + * an interrupt at the same time as it issues a real-time event. + * Real-time events are used in SMB driver, which needs to get the buffer + * status. Interrupts are used in debugger mode. + * SMB_LB_INT_CTRL_BUF_NOTE_MASK control which events flags or interrupts + * are valid. + */ +#define SMB_LB_INT_CTRL_EN BIT(0) +#define SMB_LB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8) +#define SMB_LB_INT_CTRL_CFG (SMB_LB_INT_CTRL_EN | \ + FIELD_PREP(SMB_LB_INT_CTRL_BUF_NOTE_MSK, 0xf)) + +/* Set logical buffer interrupt status register */ +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0) +#define SMB_LB_INT_STS_BUF_RESET_MSK GENMASK(3, 0) +#define SMB_LB_INT_STS_RESET FIELD_PREP(SMB_LB_INT_STS_BUF_RESET_MSK, 0xf) + +#define SMB_LB_PURGE_PURGED BIT(0) + +#define SMB_REG_ADDR_RES 0 +#define SMB_BUF_ADDR_RES 1 +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0) + +/** + * struct smb_data_buffer - Details of the buffer used by SMB + * @buf_base: Memory mapped base address of SMB. + * @buf_hw_base: SMB buffer start Physical base address, only used 32bits. + * @buf_size: Size of the buffer. + * @data_size: Size of the available trace data for SMB. + * @buf_rdptr: Current read position (index) within the buffer. + */ +struct smb_data_buffer { + void *buf_base; + u32 buf_hw_base; + unsigned long buf_size; + unsigned long data_size; + unsigned long buf_rdptr; +}; + +/** + * struct smb_drv_data - specifics associated to an SMB component + * @base: Memory mapped base address for SMB component. + * @csdev: Component vitals needed by the framework. + * @sdb: Data buffer for SMB. + * @miscdev: Specifics to handle "/dev/xyz.smb" entry. + * @mutex: Control data access to one at a time. + * @reading: Synchronise user space access to SMB buffer. + * @pid: Process ID of the process being monitored by the + * session that is using this component. + * @mode: How this SMB is being used, perf mode or sysfs mode. + */ +struct smb_drv_data { + void __iomem *base; + struct coresight_device *csdev; + struct smb_data_buffer sdb; + struct miscdevice miscdev; + struct mutex mutex; + bool reading; + pid_t pid; + u32 mode; +}; + +#endif |