summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c26
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c6
-rw-r--r--drivers/i2c/busses/i2c-mxs.c10
-rw-r--r--drivers/i2c/busses/i2c-npcm7xx.c8
5 files changed, 34 insertions, 18 deletions
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 31268074c422..724bf30600d6 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -69,6 +69,7 @@
* These share bit definitions, so use the same values for the enable &
* status bits.
*/
+#define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff
#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
@@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
bus->base + ASPEED_I2C_INTR_STS_REG);
readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+ irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
irq_remaining = irq_received;
#if IS_ENABLED(CONFIG_I2C_SLAVE)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e32ef3f01fe8..ebb4c0b03057 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1709,6 +1709,16 @@ static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
static inline void i801_acpi_remove(struct i801_priv *priv) { }
#endif
+static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
+{
+ unsigned char hstcfg = priv->original_hstcfg;
+
+ hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
+ hstcfg |= SMBHSTCFG_HST_EN;
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+ return hstcfg;
+}
+
static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char temp;
@@ -1830,14 +1840,10 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
return err;
}
- pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
- priv->original_hstcfg = temp;
- temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
- if (!(temp & SMBHSTCFG_HST_EN)) {
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+ temp = i801_setup_hstcfg(priv);
+ if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
dev_info(&dev->dev, "Enabling SMBus device\n");
- temp |= SMBHSTCFG_HST_EN;
- }
- pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
if (temp & SMBHSTCFG_SMB_SMI_EN) {
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
@@ -1952,10 +1958,9 @@ static void i801_shutdown(struct pci_dev *dev)
#ifdef CONFIG_PM_SLEEP
static int i801_suspend(struct device *dev)
{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct i801_priv *priv = pci_get_drvdata(pci_dev);
+ struct i801_priv *priv = dev_get_drvdata(dev);
- pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
return 0;
}
@@ -1963,6 +1968,7 @@ static int i801_resume(struct device *dev)
{
struct i801_priv *priv = dev_get_drvdata(dev);
+ i801_setup_hstcfg(priv);
i801_enable_host_notify(&priv->adapter);
return 0;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index efc14041d45b..0cbdfbe605b5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -681,8 +681,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int cnt_mul;
int ret = -EINVAL;
- if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
- target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
+ if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
+ target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
@@ -759,7 +759,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
- if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
ret = mtk_i2c_calculate_speed(i2c, clk_src,
I2C_MAX_FAST_MODE_FREQ,
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 9587347447f0..c4b08a924461 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -25,6 +25,7 @@
#include <linux/of_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
+#include <linux/dma/mxs-dma.h>
#define DRIVER_NAME "mxs-i2c"
@@ -200,7 +201,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ DMA_PREP_INTERRUPT |
+ MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
@@ -228,7 +230,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ DMA_PREP_INTERRUPT |
+ MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
@@ -260,7 +263,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ DMA_PREP_INTERRUPT |
+ MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 75f07138a6fa..dfcf04e1967f 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -2093,8 +2093,12 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
}
}
- /* Adaptive TimeOut: astimated time in usec + 100% margin */
- timeout_usec = (2 * 10000 / bus->bus_freq) * (2 + nread + nwrite);
+ /*
+ * Adaptive TimeOut: estimated time in usec + 100% margin:
+ * 2: double the timeout for clock stretching case
+ * 9: bits per transaction (including the ack/nack)
+ */
+ timeout_usec = (2 * 9 * USEC_PER_SEC / bus->bus_freq) * (2 + nread + nwrite);
timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec));
if (nwrite >= 32 * 1024 || nread >= 32 * 1024) {
dev_err(bus->dev, "i2c%d buffer too big\n", bus->num);
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-05 22:07:33 +0300