diff options
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r-- | drivers/iio/adc/ad7944.c | 157 |
1 files changed, 139 insertions, 18 deletions
diff --git a/drivers/iio/adc/ad7944.c b/drivers/iio/adc/ad7944.c index adb007cdd287..d5ec6b5a41c7 100644 --- a/drivers/iio/adc/ad7944.c +++ b/drivers/iio/adc/ad7944.c @@ -32,8 +32,25 @@ struct ad7944_timing_spec { unsigned int turbo_conv_ns; }; +enum ad7944_spi_mode { + /* datasheet calls this "4-wire mode" */ + AD7944_SPI_MODE_DEFAULT, + /* datasheet calls this "3-wire mode" (not related to SPI_3WIRE!) */ + AD7944_SPI_MODE_SINGLE, + /* datasheet calls this "chain mode" */ + AD7944_SPI_MODE_CHAIN, +}; + +/* maps adi,spi-mode property value to enum */ +static const char * const ad7944_spi_modes[] = { + [AD7944_SPI_MODE_DEFAULT] = "", + [AD7944_SPI_MODE_SINGLE] = "single", + [AD7944_SPI_MODE_CHAIN] = "chain", +}; + struct ad7944_adc { struct spi_device *spi; + enum ad7944_spi_mode spi_mode; /* Chip-specific timing specifications. */ const struct ad7944_timing_spec *timing_spec; /* GPIO connected to CNV pin. */ @@ -58,6 +75,9 @@ struct ad7944_adc { } sample __aligned(IIO_DMA_MINALIGN); }; +/* quite time before CNV rising edge */ +#define T_QUIET_NS 20 + static const struct ad7944_timing_spec ad7944_timing_spec = { .conv_ns = 420, .turbo_conv_ns = 320, @@ -111,6 +131,65 @@ AD7944_DEFINE_CHIP_INFO(ad7985, ad7944, 16, 0); AD7944_DEFINE_CHIP_INFO(ad7986, ad7986, 18, 1); /* + * ad7944_3wire_cs_mode_conversion - Perform a 3-wire CS mode conversion and + * acquisition + * @adc: The ADC device structure + * @chan: The channel specification + * Return: 0 on success, a negative error code on failure + * + * This performs a conversion and reads data when the chip is wired in 3-wire + * mode with the CNV line on the ADC tied to the CS line on the SPI controller. + * + * Upon successful return adc->sample.raw will contain the conversion result. + */ +static int ad7944_3wire_cs_mode_conversion(struct ad7944_adc *adc, + const struct iio_chan_spec *chan) +{ + unsigned int t_conv_ns = adc->always_turbo ? adc->timing_spec->turbo_conv_ns + : adc->timing_spec->conv_ns; + struct spi_transfer xfers[] = { + { + /* + * NB: can get better performance from some SPI + * controllers if we use the same bits_per_word + * in every transfer. + */ + .bits_per_word = chan->scan_type.realbits, + /* + * CS is tied to CNV and we need a low to high + * transition to start the conversion, so place CNV + * low for t_QUIET to prepare for this. + */ + .delay = { + .value = T_QUIET_NS, + .unit = SPI_DELAY_UNIT_NSECS, + }, + + }, + { + .bits_per_word = chan->scan_type.realbits, + /* + * CS has to be high for full conversion time to avoid + * triggering the busy indication. + */ + .cs_off = 1, + .delay = { + .value = t_conv_ns, + .unit = SPI_DELAY_UNIT_NSECS, + }, + }, + { + /* Then we can read the data during the acquisition phase */ + .rx_buf = &adc->sample.raw, + .len = BITS_TO_BYTES(chan->scan_type.storagebits), + .bits_per_word = chan->scan_type.realbits, + }, + }; + + return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers)); +} + +/* * ad7944_4wire_mode_conversion - Perform a 4-wire mode conversion and acquisition * @adc: The ADC device structure * @chan: The channel specification @@ -167,9 +246,22 @@ static int ad7944_single_conversion(struct ad7944_adc *adc, { int ret; - ret = ad7944_4wire_mode_conversion(adc, chan); - if (ret) - return ret; + switch (adc->spi_mode) { + case AD7944_SPI_MODE_DEFAULT: + ret = ad7944_4wire_mode_conversion(adc, chan); + if (ret) + return ret; + + break; + case AD7944_SPI_MODE_SINGLE: + ret = ad7944_3wire_cs_mode_conversion(adc, chan); + if (ret) + return ret; + + break; + default: + return -EOPNOTSUPP; + } if (chan->scan_type.storagebits > 16) *val = adc->sample.raw.u32; @@ -230,9 +322,23 @@ static irqreturn_t ad7944_trigger_handler(int irq, void *p) struct ad7944_adc *adc = iio_priv(indio_dev); int ret; - ret = ad7944_4wire_mode_conversion(adc, &indio_dev->channels[0]); - if (ret) + switch (adc->spi_mode) { + case AD7944_SPI_MODE_DEFAULT: + ret = ad7944_4wire_mode_conversion(adc, &indio_dev->channels[0]); + if (ret) + goto out; + + break; + case AD7944_SPI_MODE_SINGLE: + ret = ad7944_3wire_cs_mode_conversion(adc, &indio_dev->channels[0]); + if (ret) + goto out; + + break; + default: + /* not supported */ goto out; + } iio_push_to_buffers_with_timestamp(indio_dev, &adc->sample.raw, pf->timestamp); @@ -260,16 +366,9 @@ static int ad7944_probe(struct spi_device *spi) struct ad7944_adc *adc; bool have_refin = false; struct regulator *ref; + const char *str_val; int ret; - /* - * driver currently only supports the conventional "4-wire" mode and - * not other special wiring configurations. - */ - if (device_property_present(dev, "adi,spi-mode")) - return dev_err_probe(dev, -EINVAL, - "adi,spi-mode is not currently supported\n"); - indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; @@ -283,6 +382,22 @@ static int ad7944_probe(struct spi_device *spi) adc->timing_spec = chip_info->timing_spec; + if (device_property_read_string(dev, "adi,spi-mode", &str_val) == 0) { + ret = sysfs_match_string(ad7944_spi_modes, str_val); + if (ret < 0) + return dev_err_probe(dev, -EINVAL, + "unsupported adi,spi-mode\n"); + + adc->spi_mode = ret; + } else { + /* absence of adi,spi-mode property means default mode */ + adc->spi_mode = AD7944_SPI_MODE_DEFAULT; + } + + if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) + return dev_err_probe(dev, -EINVAL, + "chain mode is not implemented\n"); + /* * Some chips use unusual word sizes, so check now instead of waiting * for the first xfer. @@ -349,15 +464,17 @@ static int ad7944_probe(struct spi_device *spi) adc->ref_mv = AD7944_INTERNAL_REF_MV; } - /* - * CNV gpio is required in 4-wire mode which is the only currently - * supported mode. - */ - adc->cnv = devm_gpiod_get(dev, "cnv", GPIOD_OUT_LOW); + adc->cnv = devm_gpiod_get_optional(dev, "cnv", GPIOD_OUT_LOW); if (IS_ERR(adc->cnv)) return dev_err_probe(dev, PTR_ERR(adc->cnv), "failed to get CNV GPIO\n"); + if (!adc->cnv && adc->spi_mode == AD7944_SPI_MODE_DEFAULT) + return dev_err_probe(&spi->dev, -EINVAL, "CNV GPIO is required\n"); + if (adc->cnv && adc->spi_mode != AD7944_SPI_MODE_DEFAULT) + return dev_err_probe(&spi->dev, -EINVAL, + "CNV GPIO in single and chain mode is not currently supported\n"); + adc->turbo = devm_gpiod_get_optional(dev, "turbo", GPIOD_OUT_LOW); if (IS_ERR(adc->turbo)) return dev_err_probe(dev, PTR_ERR(adc->turbo), @@ -369,6 +486,10 @@ static int ad7944_probe(struct spi_device *spi) return dev_err_probe(dev, -EINVAL, "cannot have both turbo-gpios and adi,always-turbo\n"); + if (adc->spi_mode == AD7944_SPI_MODE_CHAIN && adc->always_turbo) + return dev_err_probe(dev, -EINVAL, + "cannot have both chain mode and always turbo\n"); + indio_dev->name = chip_info->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &ad7944_iio_info; |