diff options
Diffstat (limited to 'drivers/input/serio/i8042-acpipnpio.h')
-rw-r--r-- | drivers/input/serio/i8042-acpipnpio.h | 84 |
1 files changed, 70 insertions, 14 deletions
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index dfc6c581873b..34d1f07ea4c3 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -76,13 +76,14 @@ static inline void i8042_write_command(int val) #define SERIO_QUIRK_PROBE_DEFER BIT(5) #define SERIO_QUIRK_RESET_ALWAYS BIT(6) #define SERIO_QUIRK_RESET_NEVER BIT(7) -#define SERIO_QUIRK_DIECT BIT(8) +#define SERIO_QUIRK_DIRECT BIT(8) #define SERIO_QUIRK_DUMBKBD BIT(9) #define SERIO_QUIRK_NOLOOP BIT(10) #define SERIO_QUIRK_NOTIMEOUT BIT(11) #define SERIO_QUIRK_KBDRESET BIT(12) #define SERIO_QUIRK_DRITEK BIT(13) #define SERIO_QUIRK_NOPNP BIT(14) +#define SERIO_QUIRK_FORCENORESTORE BIT(15) /* Quirk table for different mainboards. Options similar or identical to i8042 * module parameters. @@ -627,6 +628,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX) }, { + /* Fujitsu Lifebook E756 */ + /* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { /* Fujitsu Lifebook E5411 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"), @@ -1111,6 +1121,43 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOLOOP) }, /* + * Some TongFang barebones have touchpad and/or keyboard issues after + * suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of + * them have an external PS/2 port so this can safely be set for all of + * them. + * TongFang barebones come with board_vendor and/or system_vendor set to + * a different value for each individual reseller. The only somewhat + * universal way to identify them is by board_name. + */ + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GM6XGxX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxXGxx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxXGxX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + /* * A lot of modern Clevo barebones have touchpad and/or keyboard issues * after suspend fixable with nomux + reset + noloop + nopnp. Luckily, * none of them have an external PS/2 port so this can safely be set for @@ -1149,18 +1196,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, { - /* - * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes - * the keyboard very laggy for ~5 seconds after boot and - * sometimes also after resume. - * However both are required for the keyboard to not fail - * completely sometimes after boot or resume. - */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "N150CU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1332,6 +1371,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + /* + * The Ayaneo Kun is a handheld device where some the buttons + * are handled by an AT keyboard. The keyboard is usually + * detected as raw, but sometimes, usually after a cold boot, + * it is detected as translated. Make sure that the keyboard + * is always in raw mode. + */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"), + DMI_MATCH(DMI_BOARD_NAME, "KUN"), + }, + .driver_data = (void *)(SERIO_QUIRK_DIRECT) + }, { } }; @@ -1655,7 +1708,7 @@ static void __init i8042_check_quirks(void) if (quirks & SERIO_QUIRK_RESET_NEVER) i8042_reset = I8042_RESET_NEVER; } - if (quirks & SERIO_QUIRK_DIECT) + if (quirks & SERIO_QUIRK_DIRECT) i8042_direct = true; if (quirks & SERIO_QUIRK_DUMBKBD) i8042_dumbkbd = true; @@ -1671,6 +1724,8 @@ static void __init i8042_check_quirks(void) if (quirks & SERIO_QUIRK_NOPNP) i8042_nopnp = true; #endif + if (quirks & SERIO_QUIRK_FORCENORESTORE) + i8042_forcenorestore = true; } #else static inline void i8042_check_quirks(void) {} @@ -1704,7 +1759,7 @@ static int __init i8042_platform_init(void) i8042_check_quirks(); - pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", i8042_nokbd ? " nokbd" : "", i8042_noaux ? " noaux" : "", i8042_nomux ? " nomux" : "", @@ -1724,10 +1779,11 @@ static int __init i8042_platform_init(void) "", #endif #ifdef CONFIG_PNP - i8042_nopnp ? " nopnp" : ""); + i8042_nopnp ? " nopnp" : "", #else - ""); + "", #endif + i8042_forcenorestore ? " forcenorestore" : ""); retval = i8042_pnp_init(); if (retval) |