summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c')
-rw-r--r--drivers/media/i2c/ar0521.c11
-rw-r--r--drivers/media/i2c/ir-kbd-i2c.c47
-rw-r--r--drivers/media/i2c/isl7998x.c2
-rw-r--r--drivers/media/i2c/mt9v111.c2
-rw-r--r--drivers/media/i2c/ov5640.c123
-rw-r--r--drivers/media/i2c/ov8865.c10
6 files changed, 137 insertions, 58 deletions
diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
index c6ab531532be..e408049f6312 100644
--- a/drivers/media/i2c/ar0521.c
+++ b/drivers/media/i2c/ar0521.c
@@ -406,7 +406,6 @@ static int ar0521_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_format *format)
{
struct ar0521_dev *sensor = to_ar0521_dev(sd);
- int ret = 0;
ar0521_adj_fmt(&format->format);
@@ -423,7 +422,7 @@ static int ar0521_set_fmt(struct v4l2_subdev *sd,
}
mutex_unlock(&sensor->lock);
- return ret;
+ return 0;
}
static int ar0521_s_ctrl(struct v4l2_ctrl *ctrl)
@@ -756,10 +755,12 @@ static int ar0521_power_on(struct device *dev)
gpiod_set_value(sensor->reset_gpio, 0);
usleep_range(4500, 5000); /* min 45000 clocks */
- for (cnt = 0; cnt < ARRAY_SIZE(initial_regs); cnt++)
- if (ar0521_write_regs(sensor, initial_regs[cnt].data,
- initial_regs[cnt].count))
+ for (cnt = 0; cnt < ARRAY_SIZE(initial_regs); cnt++) {
+ ret = ar0521_write_regs(sensor, initial_regs[cnt].data,
+ initial_regs[cnt].count);
+ if (ret)
goto off;
+ }
ret = ar0521_write_reg(sensor, AR0521_REG_SERIAL_FORMAT,
AR0521_REG_SERIAL_FORMAT_MIPI |
diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c
index ee6bbbb977f7..25bf1132dbff 100644
--- a/drivers/media/i2c/ir-kbd-i2c.c
+++ b/drivers/media/i2c/ir-kbd-i2c.c
@@ -238,6 +238,43 @@ static int get_key_knc1(struct IR_i2c *ir, enum rc_proto *protocol,
return 1;
}
+static int get_key_geniatech(struct IR_i2c *ir, enum rc_proto *protocol,
+ u32 *scancode, u8 *toggle)
+{
+ int i, rc;
+ unsigned char b;
+
+ /* poll IR chip */
+ for (i = 0; i < 4; i++) {
+ rc = i2c_master_recv(ir->c, &b, 1);
+ if (rc == 1)
+ break;
+ msleep(20);
+ }
+ if (rc != 1) {
+ dev_dbg(&ir->rc->dev, "read error\n");
+ if (rc < 0)
+ return rc;
+ return -EIO;
+ }
+
+ /* don't repeat the key */
+ if (ir->old == b)
+ return 0;
+ ir->old = b;
+
+ /* decode to RC5 */
+ b &= 0x7f;
+ b = (b - 1) / 2;
+
+ dev_dbg(&ir->rc->dev, "key %02x\n", b);
+
+ *protocol = RC_PROTO_RC5;
+ *scancode = b;
+ *toggle = ir->old >> 7;
+ return 1;
+}
+
static int get_key_avermedia_cardbus(struct IR_i2c *ir, enum rc_proto *protocol,
u32 *scancode, u8 *toggle)
{
@@ -766,6 +803,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
rc_proto = RC_PROTO_BIT_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
+ case 0x33:
+ name = "Geniatech";
+ ir->get_key = get_key_geniatech;
+ rc_proto = RC_PROTO_BIT_RC5;
+ ir_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
+ ir->old = 0xfc;
+ break;
case 0x6b:
name = "FusionHDTV";
ir->get_key = get_key_fusionhdtv;
@@ -825,6 +869,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
case IR_KBD_GET_KEY_KNC1:
ir->get_key = get_key_knc1;
break;
+ case IR_KBD_GET_KEY_GENIATECH:
+ ir->get_key = get_key_geniatech;
+ break;
case IR_KBD_GET_KEY_FUSIONHDTV:
ir->get_key = get_key_fusionhdtv;
break;
diff --git a/drivers/media/i2c/isl7998x.c b/drivers/media/i2c/isl7998x.c
index 246d8d182a8e..20f548a8a054 100644
--- a/drivers/media/i2c/isl7998x.c
+++ b/drivers/media/i2c/isl7998x.c
@@ -8,7 +8,7 @@
#include <linux/bitfield.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_graph.h>
diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c
index fe18e5258d7a..46d91cd0870c 100644
--- a/drivers/media/i2c/mt9v111.c
+++ b/drivers/media/i2c/mt9v111.c
@@ -633,7 +633,7 @@ static int mt9v111_hw_config(struct mt9v111_dev *mt9v111)
/*
* Set pixel integration time to the whole frame time.
- * This value controls the the shutter delay when running with AE
+ * This value controls the shutter delay when running with AE
* disabled. If longer than frame time, it affects the output
* frame rate.
*/
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 1852e1cfc7df..2d740397a5d4 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -447,8 +448,6 @@ struct ov5640_dev {
/* lock to protect all members below */
struct mutex lock;
- int power_count;
-
struct v4l2_mbus_framefmt fmt;
bool pending_fmt_change;
@@ -2696,39 +2695,24 @@ power_off:
return ret;
}
-/* --------------- Subdev Operations --------------- */
-
-static int ov5640_s_power(struct v4l2_subdev *sd, int on)
+static int ov5640_sensor_suspend(struct device *dev)
{
- struct ov5640_dev *sensor = to_ov5640_dev(sd);
- int ret = 0;
-
- mutex_lock(&sensor->lock);
-
- /*
- * If the power count is modified from 0 to != 0 or from != 0 to 0,
- * update the power state.
- */
- if (sensor->power_count == !on) {
- ret = ov5640_set_power(sensor, !!on);
- if (ret)
- goto out;
- }
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
- /* Update the power count. */
- sensor->power_count += on ? 1 : -1;
- WARN_ON(sensor->power_count < 0);
-out:
- mutex_unlock(&sensor->lock);
+ return ov5640_set_power(ov5640, false);
+}
- if (on && !ret && sensor->power_count == 1) {
- /* restore controls */
- ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
- }
+static int ov5640_sensor_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
- return ret;
+ return ov5640_set_power(ov5640, true);
}
+/* --------------- Subdev Operations --------------- */
+
static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
struct v4l2_fract *fi,
u32 width, u32 height)
@@ -3314,6 +3298,9 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
/* v4l2_ctrl_lock() locks our own mutex */
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
+ return 0;
+
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
val = ov5640_get_gain(sensor);
@@ -3329,6 +3316,8 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return 0;
}
@@ -3358,9 +3347,9 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
/*
* If the device is not powered up by the host driver do
* not apply any controls to H/W at this time. Instead
- * the controls will be restored right after power-up.
+ * the controls will be restored at start streaming time.
*/
- if (sensor->power_count == 0)
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
return 0;
switch (ctrl->id) {
@@ -3402,6 +3391,8 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3677,6 +3668,18 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret = 0;
+ if (enable) {
+ ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
+ if (ret) {
+ pm_runtime_put(&sensor->i2c_client->dev);
+ return ret;
+ }
+ }
+
mutex_lock(&sensor->lock);
if (sensor->streaming == !enable) {
@@ -3701,8 +3704,13 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
if (!ret)
sensor->streaming = enable;
}
+
out:
mutex_unlock(&sensor->lock);
+
+ if (!enable || ret)
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3724,7 +3732,6 @@ static int ov5640_init_cfg(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_core_ops ov5640_core_ops = {
- .s_power = ov5640_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -3770,26 +3777,20 @@ static int ov5640_check_chip_id(struct ov5640_dev *sensor)
int ret = 0;
u16 chip_id;
- ret = ov5640_set_power_on(sensor);
- if (ret)
- return ret;
-
ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id);
if (ret) {
dev_err(&client->dev, "%s: failed to read chip identifier\n",
__func__);
- goto power_off;
+ return ret;
}
if (chip_id != 0x5640) {
dev_err(&client->dev, "%s: wrong chip identifier, expected 0x5640, got 0x%x\n",
__func__, chip_id);
- ret = -ENXIO;
+ return -ENXIO;
}
-power_off:
- ov5640_set_power_off(sensor);
- return ret;
+ return 0;
}
static int ov5640_probe(struct i2c_client *client)
@@ -3880,26 +3881,43 @@ static int ov5640_probe(struct i2c_client *client)
ret = ov5640_get_regulators(sensor);
if (ret)
- return ret;
+ goto entity_cleanup;
mutex_init(&sensor->lock);
- ret = ov5640_check_chip_id(sensor);
+ ret = ov5640_init_controls(sensor);
if (ret)
goto entity_cleanup;
- ret = ov5640_init_controls(sensor);
- if (ret)
+ ret = ov5640_sensor_resume(dev);
+ if (ret) {
+ dev_err(dev, "failed to power on\n");
goto entity_cleanup;
+ }
+
+ pm_runtime_set_active(dev);
+ pm_runtime_get_noresume(dev);
+ pm_runtime_enable(dev);
+
+ ret = ov5640_check_chip_id(sensor);
+ if (ret)
+ goto err_pm_runtime;
ret = v4l2_async_register_subdev_sensor(&sensor->sd);
if (ret)
- goto free_ctrls;
+ goto err_pm_runtime;
+
+ pm_runtime_set_autosuspend_delay(dev, 1000);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put_autosuspend(dev);
return 0;
-free_ctrls:
+err_pm_runtime:
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
+ ov5640_sensor_suspend(dev);
entity_cleanup:
media_entity_cleanup(&sensor->sd.entity);
mutex_destroy(&sensor->lock);
@@ -3910,6 +3928,12 @@ static void ov5640_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
+ struct device *dev = &client->dev;
+
+ pm_runtime_disable(dev);
+ if (!pm_runtime_status_suspended(dev))
+ ov5640_sensor_suspend(dev);
+ pm_runtime_set_suspended(dev);
v4l2_async_unregister_subdev(&sensor->sd);
media_entity_cleanup(&sensor->sd.entity);
@@ -3917,6 +3941,10 @@ static void ov5640_remove(struct i2c_client *client)
mutex_destroy(&sensor->lock);
}
+static const struct dev_pm_ops ov5640_pm_ops = {
+ SET_RUNTIME_PM_OPS(ov5640_sensor_suspend, ov5640_sensor_resume, NULL)
+};
+
static const struct i2c_device_id ov5640_id[] = {
{"ov5640", 0},
{},
@@ -3933,6 +3961,7 @@ static struct i2c_driver ov5640_i2c_driver = {
.driver = {
.name = "ov5640",
.of_match_table = ov5640_dt_ids,
+ .pm = &ov5640_pm_ops,
},
.id_table = ov5640_id,
.probe_new = ov5640_probe,
diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
index a233c34b168e..cae1866134a0 100644
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -3034,11 +3034,13 @@ static int ov8865_probe(struct i2c_client *client)
&rate);
if (!ret && sensor->extclk) {
ret = clk_set_rate(sensor->extclk, rate);
- if (ret)
- return dev_err_probe(dev, ret,
- "failed to set clock rate\n");
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to set clock rate\n");
+ goto error_endpoint;
+ }
} else if (ret && !sensor->extclk) {
- return dev_err_probe(dev, ret, "invalid clock config\n");
+ dev_err_probe(dev, ret, "invalid clock config\n");
+ goto error_endpoint;
}
sensor->extclk_rate = rate ? rate : clk_get_rate(sensor->extclk);
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 11:09:57 +0300