diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-reg.h')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-reg.h | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h deleted file mode 100644 index 6ff368297f6e..000000000000 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ /dev/null @@ -1,226 +0,0 @@ -#define EM_GPIO_0 (1 << 0) -#define EM_GPIO_1 (1 << 1) -#define EM_GPIO_2 (1 << 2) -#define EM_GPIO_3 (1 << 3) -#define EM_GPIO_4 (1 << 4) -#define EM_GPIO_5 (1 << 5) -#define EM_GPIO_6 (1 << 6) -#define EM_GPIO_7 (1 << 7) - -#define EM_GPO_0 (1 << 0) -#define EM_GPO_1 (1 << 1) -#define EM_GPO_2 (1 << 2) -#define EM_GPO_3 (1 << 3) - -/* em28xx endpoints */ -#define EM28XX_EP_ANALOG 0x82 -#define EM28XX_EP_AUDIO 0x83 -#define EM28XX_EP_DIGITAL 0x84 - -/* em2800 registers */ -#define EM2800_R08_AUDIOSRC 0x08 - -/* em28xx registers */ - -#define EM28XX_R00_CHIPCFG 0x00 - -/* em28xx Chip Configuration 0x00 */ -#define EM28XX_CHIPCFG_VENDOR_AUDIO 0x80 -#define EM28XX_CHIPCFG_I2S_VOLUME_CAPABLE 0x40 -#define EM28XX_CHIPCFG_I2S_5_SAMPRATES 0x30 -#define EM28XX_CHIPCFG_I2S_3_SAMPRATES 0x20 -#define EM28XX_CHIPCFG_AC97 0x10 -#define EM28XX_CHIPCFG_AUDIOMASK 0x30 - -#define EM28XX_R01_CHIPCFG2 0x01 - -/* em28xx Chip Configuration 2 0x01 */ -#define EM28XX_CHIPCFG2_TS_PRESENT 0x10 -#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK 0x0c /* bits 3-2 */ -#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF 0x00 -#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF 0x04 -#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF 0x08 -#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF 0x0c -#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK 0x03 /* bits 0-1 */ -#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188 0x00 -#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376 0x01 -#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564 0x02 -#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03 - - - /* GPIO/GPO registers */ -#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ -#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ - -#define EM28XX_R06_I2C_CLK 0x06 - -/* em28xx I2C Clock Register (0x06) */ -#define EM28XX_I2C_CLK_ACK_LAST_READ 0x80 -#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40 -#define EM28XX_I2C_EEPROM_ON_BOARD 0x08 -#define EM28XX_I2C_EEPROM_KEY_VALID 0x04 -#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */ -#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */ -#define EM28XX_I2C_FREQ_25_KHZ 0x02 -#define EM28XX_I2C_FREQ_400_KHZ 0x01 -#define EM28XX_I2C_FREQ_100_KHZ 0x00 - - -#define EM28XX_R0A_CHIPID 0x0a -#define EM28XX_R0C_USBSUSP 0x0c /* */ - -#define EM28XX_R0E_AUDIOSRC 0x0e -#define EM28XX_R0F_XCLK 0x0f - -/* em28xx XCLK Register (0x0f) */ -#define EM28XX_XCLK_AUDIO_UNMUTE 0x80 /* otherwise audio muted */ -#define EM28XX_XCLK_I2S_MSB_TIMING 0x40 /* otherwise standard timing */ -#define EM28XX_XCLK_IR_RC5_MODE 0x20 /* otherwise NEC mode */ -#define EM28XX_XCLK_IR_NEC_CHK_PARITY 0x10 -#define EM28XX_XCLK_FREQUENCY_30MHZ 0x00 /* Freq. select (bits [3-0]) */ -#define EM28XX_XCLK_FREQUENCY_15MHZ 0x01 -#define EM28XX_XCLK_FREQUENCY_10MHZ 0x02 -#define EM28XX_XCLK_FREQUENCY_7_5MHZ 0x03 -#define EM28XX_XCLK_FREQUENCY_6MHZ 0x04 -#define EM28XX_XCLK_FREQUENCY_5MHZ 0x05 -#define EM28XX_XCLK_FREQUENCY_4_3MHZ 0x06 -#define EM28XX_XCLK_FREQUENCY_12MHZ 0x07 -#define EM28XX_XCLK_FREQUENCY_20MHZ 0x08 -#define EM28XX_XCLK_FREQUENCY_20MHZ_2 0x09 -#define EM28XX_XCLK_FREQUENCY_48MHZ 0x0a -#define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b - -#define EM28XX_R10_VINMODE 0x10 - -#define EM28XX_R11_VINCTRL 0x11 - -/* em28xx Video Input Control Register 0x11 */ -#define EM28XX_VINCTRL_VBI_SLICED 0x80 -#define EM28XX_VINCTRL_VBI_RAW 0x40 -#define EM28XX_VINCTRL_VOUT_MODE_IN 0x20 /* HREF,VREF,VACT in output */ -#define EM28XX_VINCTRL_CCIR656_ENABLE 0x10 -#define EM28XX_VINCTRL_VBI_16BIT_RAW 0x08 /* otherwise 8-bit raw */ -#define EM28XX_VINCTRL_FID_ON_HREF 0x04 -#define EM28XX_VINCTRL_DUAL_EDGE_STROBE 0x02 -#define EM28XX_VINCTRL_INTERLACED 0x01 - -#define EM28XX_R12_VINENABLE 0x12 /* */ - -#define EM28XX_R14_GAMMA 0x14 -#define EM28XX_R15_RGAIN 0x15 -#define EM28XX_R16_GGAIN 0x16 -#define EM28XX_R17_BGAIN 0x17 -#define EM28XX_R18_ROFFSET 0x18 -#define EM28XX_R19_GOFFSET 0x19 -#define EM28XX_R1A_BOFFSET 0x1a - -#define EM28XX_R1B_OFLOW 0x1b -#define EM28XX_R1C_HSTART 0x1c -#define EM28XX_R1D_VSTART 0x1d -#define EM28XX_R1E_CWIDTH 0x1e -#define EM28XX_R1F_CHEIGHT 0x1f - -#define EM28XX_R20_YGAIN 0x20 -#define EM28XX_R21_YOFFSET 0x21 -#define EM28XX_R22_UVGAIN 0x22 -#define EM28XX_R23_UOFFSET 0x23 -#define EM28XX_R24_VOFFSET 0x24 -#define EM28XX_R25_SHARPNESS 0x25 - -#define EM28XX_R26_COMPR 0x26 -#define EM28XX_R27_OUTFMT 0x27 - -/* em28xx Output Format Register (0x27) */ -#define EM28XX_OUTFMT_RGB_8_RGRG 0x00 -#define EM28XX_OUTFMT_RGB_8_GRGR 0x01 -#define EM28XX_OUTFMT_RGB_8_GBGB 0x02 -#define EM28XX_OUTFMT_RGB_8_BGBG 0x03 -#define EM28XX_OUTFMT_RGB_16_656 0x04 -#define EM28XX_OUTFMT_RGB_8_BAYER 0x08 /* Pattern in Reg 0x10[1-0] */ -#define EM28XX_OUTFMT_YUV211 0x10 -#define EM28XX_OUTFMT_YUV422_Y0UY1V 0x14 -#define EM28XX_OUTFMT_YUV422_Y1UY0V 0x15 -#define EM28XX_OUTFMT_YUV411 0x18 - - -#define EM28XX_R28_XMIN 0x28 -#define EM28XX_R29_XMAX 0x29 -#define EM28XX_R2A_YMIN 0x2a -#define EM28XX_R2B_YMAX 0x2b - -#define EM28XX_R30_HSCALELOW 0x30 -#define EM28XX_R31_HSCALEHIGH 0x31 -#define EM28XX_R32_VSCALELOW 0x32 -#define EM28XX_R33_VSCALEHIGH 0x33 -#define EM28XX_R34_VBI_START_H 0x34 -#define EM28XX_R35_VBI_START_V 0x35 -#define EM28XX_R36_VBI_WIDTH 0x36 -#define EM28XX_R37_VBI_HEIGHT 0x37 - -#define EM28XX_R40_AC97LSB 0x40 -#define EM28XX_R41_AC97MSB 0x41 -#define EM28XX_R42_AC97ADDR 0x42 -#define EM28XX_R43_AC97BUSY 0x43 - -#define EM28XX_R45_IR 0x45 - /* 0x45 bit 7 - parity bit - bits 6-0 - count - 0x46 IR brand - 0x47 IR data - */ - -/* em2874 registers */ -#define EM2874_R50_IR_CONFIG 0x50 -#define EM2874_R51_IR 0x51 -#define EM2874_R5F_TS_ENABLE 0x5f -#define EM2874_R80_GPIO 0x80 - -/* em2874 IR config register (0x50) */ -#define EM2874_IR_NEC 0x00 -#define EM2874_IR_RC5 0x04 -#define EM2874_IR_RC6_MODE_0 0x08 -#define EM2874_IR_RC6_MODE_6A 0x0b - -/* em2874 Transport Stream Enable Register (0x5f) */ -#define EM2874_TS1_CAPTURE_ENABLE (1 << 0) -#define EM2874_TS1_FILTER_ENABLE (1 << 1) -#define EM2874_TS1_NULL_DISCARD (1 << 2) -#define EM2874_TS2_CAPTURE_ENABLE (1 << 4) -#define EM2874_TS2_FILTER_ENABLE (1 << 5) -#define EM2874_TS2_NULL_DISCARD (1 << 6) - -/* register settings */ -#define EM2800_AUDIO_SRC_TUNER 0x0d -#define EM2800_AUDIO_SRC_LINE 0x0c -#define EM28XX_AUDIO_SRC_TUNER 0xc0 -#define EM28XX_AUDIO_SRC_LINE 0x80 - -/* FIXME: Need to be populated with the other chip ID's */ -enum em28xx_chip_id { - CHIP_ID_EM2800 = 7, - CHIP_ID_EM2710 = 17, - CHIP_ID_EM2820 = 18, /* Also used by some em2710 */ - CHIP_ID_EM2840 = 20, - CHIP_ID_EM2750 = 33, - CHIP_ID_EM2860 = 34, - CHIP_ID_EM2870 = 35, - CHIP_ID_EM2883 = 36, - CHIP_ID_EM2874 = 65, - CHIP_ID_EM2884 = 68, - CHIP_ID_EM28174 = 113, -}; - -/* - * Registers used by em202 - */ - -/* EMP202 vendor registers */ -#define EM202_EXT_MODEM_CTRL 0x3e -#define EM202_GPIO_CONF 0x4c -#define EM202_GPIO_POLARITY 0x4e -#define EM202_GPIO_STICKY 0x50 -#define EM202_GPIO_MASK 0x52 -#define EM202_GPIO_STATUS 0x54 -#define EM202_SPDIF_OUT_SEL 0x6a -#define EM202_ANTIPOP 0x72 -#define EM202_EAPD_GPIO_ACCESS 0x74 |