diff options
Diffstat (limited to 'drivers/mfd/ab8500-core.c')
-rw-r--r-- | drivers/mfd/ab8500-core.c | 76 |
1 files changed, 62 insertions, 14 deletions
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index e1650badd106..7c84ced2e01b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -19,6 +19,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-bm.h> #include <linux/mfd/dbx500-prcmu.h> #include <linux/regulator/ab8500.h> #include <linux/of.h> @@ -319,6 +320,7 @@ static struct abx500_ops ab8500_ops = { .mask_and_set_register = ab8500_mask_and_set_register, .event_registers_startup_state_get = NULL, .startup_irq_enabled = NULL, + .dump_all_banks = ab8500_dump_all_banks, }; static void ab8500_irq_lock(struct irq_data *data) @@ -367,16 +369,48 @@ static void ab8500_irq_mask(struct irq_data *data) int mask = 1 << (offset % 8); ab8500->mask[index] |= mask; + + /* The AB8500 GPIOs have two interrupts each (rising & falling). */ + if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R) + ab8500->mask[index + 2] |= mask; + if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R) + ab8500->mask[index + 1] |= mask; + if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R) + /* Here the falling IRQ is one bit lower */ + ab8500->mask[index] |= (mask << 1); } static void ab8500_irq_unmask(struct irq_data *data) { struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); + unsigned int type = irqd_get_trigger_type(data); int offset = data->hwirq; int index = offset / 8; int mask = 1 << (offset % 8); - ab8500->mask[index] &= ~mask; + if (type & IRQ_TYPE_EDGE_RISING) + ab8500->mask[index] &= ~mask; + + /* The AB8500 GPIOs have two interrupts each (rising & falling). */ + if (type & IRQ_TYPE_EDGE_FALLING) { + if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R) + ab8500->mask[index + 2] &= ~mask; + else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R) + ab8500->mask[index + 1] &= ~mask; + else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R) + /* Here the falling IRQ is one bit lower */ + ab8500->mask[index] &= ~(mask << 1); + else + ab8500->mask[index] &= ~mask; + } else { + /* Satisfies the case where type is not set. */ + ab8500->mask[index] &= ~mask; + } +} + +static int ab8500_irq_set_type(struct irq_data *data, unsigned int type) +{ + return 0; } static struct irq_chip ab8500_irq_chip = { @@ -386,6 +420,7 @@ static struct irq_chip ab8500_irq_chip = { .irq_mask = ab8500_irq_mask, .irq_disable = ab8500_irq_mask, .irq_unmask = ab8500_irq_unmask, + .irq_set_type = ab8500_irq_set_type, }; static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, @@ -410,6 +445,19 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, line = (i << 3) + int_bit; latch_val &= ~(1 << int_bit); + /* + * This handles the falling edge hwirqs from the GPIO + * lines. Route them back to the line registered for the + * rising IRQ, as this is merely a flag for the same IRQ + * in linux terms. + */ + if (line >= AB8500_INT_GPIO6F && line <= AB8500_INT_GPIO41F) + line -= 16; + if (line >= AB9540_INT_GPIO50F && line <= AB9540_INT_GPIO54F) + line -= 8; + if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F) + line += 1; + handle_nested_irq(ab8500->irq_base + line); } while (latch_val); @@ -520,6 +568,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev) int virq = ab8500_irq_get_virq(ab8500, line); handle_nested_irq(virq); + ab8500_debug_register_interrupt(line); value &= ~(1 << bit); } while (value); @@ -749,6 +798,12 @@ static struct resource ab8500_charger_resources[] = { .end = AB8500_INT_CH_WD_EXP, .flags = IORESOURCE_IRQ, }, + { + .name = "VBUS_CH_DROP_END", + .start = AB8500_INT_VBUS_CH_DROP_END, + .end = AB8500_INT_VBUS_CH_DROP_END, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_btemp_resources[] = { @@ -922,7 +977,7 @@ static struct resource ab8505_iddet_resources[] = { static struct resource ab8500_temp_resources[] = { { - .name = "AB8500_TEMP_WARM", + .name = "ABX500_TEMP_WARM", .start = AB8500_INT_TEMP_WARM, .end = AB8500_INT_TEMP_WARM, .flags = IORESOURCE_IRQ, @@ -998,8 +1053,8 @@ static struct mfd_cell abx500_common_devs[] = { .of_compatible = "stericsson,ab8500-denc", }, { - .name = "ab8500-temp", - .of_compatible = "stericsson,ab8500-temp", + .name = "abx500-temp", + .of_compatible = "stericsson,abx500-temp", .num_resources = ARRAY_SIZE(ab8500_temp_resources), .resources = ab8500_temp_resources, }, @@ -1011,46 +1066,38 @@ static struct mfd_cell ab8500_bm_devs[] = { .of_compatible = "stericsson,ab8500-charger", .num_resources = ARRAY_SIZE(ab8500_charger_resources), .resources = ab8500_charger_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-btemp", .of_compatible = "stericsson,ab8500-btemp", .num_resources = ARRAY_SIZE(ab8500_btemp_resources), .resources = ab8500_btemp_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-fg", .of_compatible = "stericsson,ab8500-fg", .num_resources = ARRAY_SIZE(ab8500_fg_resources), .resources = ab8500_fg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-chargalg", .of_compatible = "stericsson,ab8500-chargalg", .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), .resources = ab8500_chargalg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, }; static struct mfd_cell ab8500_devs[] = { { - .name = "ab8500-gpio", + .name = "pinctrl-ab8500", .of_compatible = "stericsson,ab8500-gpio", }, { @@ -1067,7 +1114,8 @@ static struct mfd_cell ab8500_devs[] = { static struct mfd_cell ab9540_devs[] = { { - .name = "ab8500-gpio", + .name = "pinctrl-ab9540", + .of_compatible = "stericsson,ab9540-gpio", }, { .name = "ab9540-usb", |