summaryrefslogtreecommitdiff
path: root/drivers/mfd/ab8500-gpadc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/ab8500-gpadc.c')
-rw-r--r--drivers/mfd/ab8500-gpadc.c559
1 files changed, 456 insertions, 103 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 5f341a50ee5a..65f72284185d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -37,6 +37,13 @@
#define AB8500_GPADC_AUTODATAL_REG 0x07
#define AB8500_GPADC_AUTODATAH_REG 0x08
#define AB8500_GPADC_MUX_CTRL_REG 0x09
+#define AB8540_GPADC_MANDATA2L_REG 0x09
+#define AB8540_GPADC_MANDATA2H_REG 0x0A
+#define AB8540_GPADC_APEAAX_REG 0x10
+#define AB8540_GPADC_APEAAT_REG 0x11
+#define AB8540_GPADC_APEAAM_REG 0x12
+#define AB8540_GPADC_APEAAH_REG 0x13
+#define AB8540_GPADC_APEAAL_REG 0x14
/*
* OTP register offsets
@@ -49,19 +56,29 @@
#define AB8500_GPADC_CAL_5 0x13
#define AB8500_GPADC_CAL_6 0x14
#define AB8500_GPADC_CAL_7 0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7 0x38
+#define AB8540_GPADC_OTP4_REG_6 0x39
+#define AB8540_GPADC_OTP4_REG_5 0x3A
/* gpadc constants */
#define EN_VINTCORE12 0x04
#define EN_VTVOUT 0x02
#define EN_GPADC 0x01
#define DIS_GPADC 0x00
-#define SW_AVG_16 0x60
+#define AVG_1 0x00
+#define AVG_4 0x20
+#define AVG_8 0x40
+#define AVG_16 0x60
#define ADC_SW_CONV 0x04
#define EN_ICHAR 0x80
#define BTEMP_PULL_UP 0x08
#define EN_BUF 0x40
#define DIS_ZERO 0x00
#define GPADC_BUSY 0x01
+#define EN_FALLING 0x10
+#define EN_TRIG_EDGE 0x02
+#define EN_VBIAS_XTAL_TEMP 0x02
/* GPADC constants from AB8500 spec, UM0836 */
#define ADC_RESOLUTION 1024
@@ -80,8 +97,21 @@
#define ADC_CH_BKBAT_MIN 0
#define ADC_CH_BKBAT_MAX 3200
+/* GPADC constants from AB8540 spec */
+#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX 6000
+#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX_V 60
+#define IBAT_VDROP_L (-56) /* mV */
+#define IBAT_VDROP_H 56
+
/* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE 1000
+#define CALIB_SCALE 1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define CALIB_SHIFT_IBAT 20
/* Time in ms before disabling regulator */
#define GPADC_AUDOSUSPEND_DELAY 1
@@ -92,6 +122,7 @@ enum cal_channels {
ADC_INPUT_VMAIN = 0,
ADC_INPUT_BTEMP,
ADC_INPUT_VBAT,
+ ADC_INPUT_IBAT,
NBR_CAL_INPUTS,
};
@@ -102,8 +133,10 @@ enum cal_channels {
* @offset: Offset of the ADC channel
*/
struct adc_cal_data {
- u64 gain;
- u64 offset;
+ s64 gain;
+ s64 offset;
+ u16 otp_calib_hi;
+ u16 otp_calib_lo;
};
/**
@@ -116,7 +149,10 @@ struct adc_cal_data {
* the completion of gpadc conversion
* @ab8500_gpadc_lock: structure of type mutex
* @regu: pointer to the struct regulator
- * @irq: interrupt number that is used by gpadc
+ * @irq_sw: interrupt number that is used by gpadc for Sw
+ * conversion
+ * @irq_hw: interrupt number that is used by gpadc for Hw
+ * conversion
* @cal_data array of ADC calibration data structs
*/
struct ab8500_gpadc {
@@ -126,7 +162,8 @@ struct ab8500_gpadc {
struct completion ab8500_gpadc_complete;
struct mutex ab8500_gpadc_lock;
struct regulator *regu;
- int irq;
+ int irq_sw;
+ int irq_hw;
struct adc_cal_data cal_data[NBR_CAL_INPUTS];
};
@@ -171,6 +208,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
break;
+ case XTAL_TEMP:
case BAT_CTRL:
case BTEMP_BALL:
case ACC_DETECT1:
@@ -189,6 +227,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
break;
case MAIN_BAT_V:
+ case VBAT_TRUE_MEAS:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
@@ -232,6 +271,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
ADC_RESOLUTION;
break;
+ case IBAT_VIRTUAL_CHANNEL:
+ /* For some reason we don't have calibrated data */
+ if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
+ res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
+ ADC_CH_IBAT_MIN) * ad_value /
+ ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use the calibrated data */
+ res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
+ gpadc->cal_data[ADC_INPUT_IBAT].offset)
+ >> CALIB_SHIFT_IBAT;
+ break;
+
default:
dev_err(gpadc->dev,
"unknown channel, not possible to convert\n");
@@ -244,25 +297,35 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
- * ab8500_gpadc_convert() - gpadc conversion
+ * ab8500_gpadc_sw_hw_convert() - gpadc conversion
* @channel: analog channel to be converted to digital data
+ * @avg_sample: number of ADC sample to average
+ * @trig_egde: selected ADC trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
* This function converts the selected analog i/p to digital
* data.
*/
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int ad_value;
int voltage;
- ad_value = ab8500_gpadc_read_raw(gpadc, channel);
- if (ad_value < 0) {
- dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+/* On failure retry a second time */
+ if (ad_value < 0)
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+if (ad_value < 0) {
+ dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
+ channel);
return ad_value;
}
voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-
if (voltage < 0)
dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
" %d AD: 0x%x\n", channel, ad_value);
@@ -274,21 +337,46 @@ EXPORT_SYMBOL(ab8500_gpadc_convert);
/**
* ab8500_gpadc_read_raw() - gpadc read
* @channel: analog channel to be read
+ * @avg_sample: number of ADC sample to average
+ * @trig_edge: selected trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
- * This function obtains the raw ADC value, this then needs
- * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ * This function obtains the raw ADC value for an hardware conversion,
+ * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
*/
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
+{
+ int raw_data;
+ raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
+ avg_sample, trig_edge, trig_timer, conv_type, NULL);
+ return raw_data;
+}
+
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+ int *ibat)
{
int ret;
int looplimit = 0;
- u8 val, low_data, high_data;
+ unsigned long completion_timeout;
+ u8 val, low_data, high_data, low_data2, high_data2;
+ u8 val_reg1 = 0;
+ unsigned int delay_min = 0;
+ unsigned int delay_max = 0;
+ u8 data_low_addr, data_high_addr;
if (!gpadc)
return -ENODEV;
- mutex_lock(&gpadc->ab8500_gpadc_lock);
+ /* check if convertion is supported */
+ if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
+ return -ENOTSUPP;
+ if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
+ return -ENOTSUPP;
+ mutex_lock(&gpadc->ab8500_gpadc_lock);
/* Enable VTVout LDO this is required for GPADC */
pm_runtime_get_sync(gpadc->dev);
@@ -309,16 +397,34 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
}
/* Enable GPADC */
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
- if (ret < 0) {
- dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
- goto out;
+ val_reg1 |= EN_GPADC;
+
+ /* Select the channel source and set average samples */
+ switch (avg_sample) {
+ case SAMPLE_1:
+ val = channel | AVG_1;
+ break;
+ case SAMPLE_4:
+ val = channel | AVG_4;
+ break;
+ case SAMPLE_8:
+ val = channel | AVG_8;
+ break;
+ default:
+ val = channel | AVG_16;
+ break;
}
- /* Select the channel source and set average samples to 16 */
- ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
+ if (conv_type == ADC_HW) {
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
+ val_reg1 |= EN_TRIG_EDGE;
+ if (trig_edge)
+ val_reg1 |= EN_FALLING;
+ }
+ else
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
@@ -333,71 +439,129 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_ICHAR,
- EN_BUF | EN_ICHAR);
+ val_reg1 |= EN_BUF | EN_ICHAR;
break;
case BTEMP_BALL:
if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
- /* Turn on btemp pull-up on ABB 3.0 */
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | BTEMP_PULL_UP,
- EN_BUF | BTEMP_PULL_UP);
-
- /*
- * Delay might be needed for ABB8500 cut 3.0, if not, remove
- * when hardware will be available
- */
- usleep_range(1000, 1000);
+ val_reg1 |= EN_BUF | BTEMP_PULL_UP;
+ /*
+ * Delay might be needed for ABB8500 cut 3.0, if not,
+ * remove when hardware will be availible
+ */
+ delay_min = 1000; /* Delay in micro seconds */
+ delay_max = 10000; /* large range to optimise sleep mode */
break;
}
/* Intentional fallthrough */
default:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
+ val_reg1 |= EN_BUF;
break;
}
+
+ /* Write configuration to register */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
if (ret < 0) {
dev_err(gpadc->dev,
- "gpadc_conversion: select falling edge failed\n");
+ "gpadc_conversion: set Control register failed\n");
goto out;
}
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: start s/w conversion failed\n");
- goto out;
+ if (delay_min != 0)
+ usleep_range(delay_min, delay_max);
+
+ if (conv_type == ADC_HW) {
+ /* Set trigger delay timer */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: trig timer failed\n");
+ goto out;
+ }
+ completion_timeout = 2 * HZ;
+ data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+ data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+ } else {
+ /* Start SW conversion */
+ ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ ADC_SW_CONV, ADC_SW_CONV);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: start s/w conv failed\n");
+ goto out;
+ }
+ completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
+ data_low_addr = AB8500_GPADC_MANDATAL_REG;
+ data_high_addr = AB8500_GPADC_MANDATAH_REG;
}
+
/* wait for completion of conversion */
if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
- msecs_to_jiffies(CONVERSION_TIME))) {
+ completion_timeout)) {
dev_err(gpadc->dev,
- "timeout: didn't receive GPADC conversion interrupt\n");
+ "timeout didn't receive GPADC conv interrupt\n");
ret = -EINVAL;
goto out;
}
/* Read the converted RAW data */
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAL_REG, &low_data);
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_low_addr, &low_data);
if (ret < 0) {
dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
goto out;
}
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAH_REG, &high_data);
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_high_addr, &high_data);
if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read high data failed\n");
+ dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
goto out;
}
+ /* Check if double convertion is required */
+ if ((channel == BAT_CTRL_AND_IBAT) ||
+ (channel == VBAT_MEAS_AND_IBAT) ||
+ (channel == VBAT_TRUE_MEAS_AND_IBAT) ||
+ (channel == BAT_TEMP_AND_IBAT)) {
+
+ if (conv_type == ADC_HW) {
+ /* not supported */
+ ret = -ENOTSUPP;
+ dev_err(gpadc->dev,
+ "gpadc_conversion: only SW double conversion supported\n");
+ goto out;
+ } else {
+ /* Read the converted RAW data 2 */
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+ &low_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw low data 2 failed\n");
+ goto out;
+ }
+
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+ &high_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw high data 2 failed\n");
+ goto out;
+ }
+ if (ibat != NULL) {
+ *ibat = (high_data2 << 8) | low_data2;
+ } else {
+ dev_warn(gpadc->dev,
+ "gpadc_conversion: ibat not stored\n");
+ }
+
+ }
+ }
+
/* Disable GPADC */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -406,6 +570,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
goto out;
}
+ /* Disable VTVout LDO this is required for GPADC */
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
@@ -422,9 +587,7 @@ out:
*/
(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-
pm_runtime_put(gpadc->dev);
-
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -433,16 +596,16 @@ out:
EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
- * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
* @irq: irq number
* @data: pointer to the data passed during request irq
*
- * This is a interrupt service routine for s/w gpadc conversion completion.
+ * This is a interrupt service routine for gpadc conversion completion.
* Notifies the gpadc completion is completed and the converted raw value
* can be read from the registers.
* Returns IRQ status(IRQ_HANDLED)
*/
-static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
{
struct ab8500_gpadc *gpadc = _gpadc;
@@ -461,15 +624,27 @@ static int otp_cal_regs[] = {
AB8500_GPADC_CAL_7,
};
+static int otp4_cal_regs[] = {
+ AB8540_GPADC_OTP4_REG_7,
+ AB8540_GPADC_OTP4_REG_6,
+ AB8540_GPADC_OTP4_REG_5,
+};
+
static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
{
int i;
int ret[ARRAY_SIZE(otp_cal_regs)];
u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-
+ int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+ u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
int vmain_high, vmain_low;
int btemp_high, btemp_low;
int vbat_high, vbat_low;
+ int ibat_high, ibat_low;
+ s64 V_gain, V_offset, V2A_gain, V2A_offset;
+ struct ab8500 *ab8500;
+
+ ab8500 = gpadc->parent;
/* First we read all OTP registers and store the error code */
for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
@@ -489,7 +664,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* bt_h/l = btemp_high/low
* vb_h/l = vbat_high/low
*
- * Data bits:
+ * Data bits 8500/9540:
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | | vm_h9 | vm_h8
@@ -507,6 +682,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
* |.......|.......|.......|.......|.......|.......|.......|.......
*
+ * Data bits 8540:
+ * OTP2
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ *
+ * Data bits 8540:
+ * OTP4
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | | ib_h9 | ib_h8 | ib_h7
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+ *
*
* Ideal output ADC codes corresponding to injected input voltages
* during manufacturing is:
@@ -519,38 +723,116 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* vbat_low: Vin = 2380mV / ADC ideal code = 33
*/
- /* Calculate gain and offset for VMAIN if all reads succeeded */
- if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
- vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
- ((gpadc_cal[1] & 0x3F) << 2) |
- ((gpadc_cal[2] & 0xC0) >> 6));
+ if (is_ab8540(ab8500)) {
+ /* Calculate gain and offset for VMAIN if all reads succeeded*/
+ if (!(ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+ gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+ 19500 - (CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ }
- vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+ /* Read IBAT calibration Data */
+ for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+ ret_otp4[i] = abx500_get_register_interruptible(
+ gpadc->dev, AB8500_OTP_EMUL,
+ otp4_cal_regs[i], &gpadc_otp4[i]);
+ if (ret_otp4[i] < 0)
+ dev_err(gpadc->dev,
+ "%s: read otp4 reg 0x%02x failed\n",
+ __func__, otp4_cal_regs[i]);
+ }
- gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
- (19500 - 315) / (vmain_high - vmain_low);
+ /* Calculate gain and offset for IBAT if all reads succeeded */
+ if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+ ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+ ((gpadc_otp4[1] & 0xFE) >> 1));
+ ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+ ((gpadc_otp4[2] & 0xF8) >> 3));
+
+ gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
+ (u16)ibat_high;
+ gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
+ (u16)ibat_low;
+
+ V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
+ << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+ V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
+ (((IBAT_VDROP_H - IBAT_VDROP_L) <<
+ CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+ * ibat_high;
+ /*
+ * Result obtained is in mV (at a scale factor),
+ * we need to calculate gain and offset to get mA
+ */
+ V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
+ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+ V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
+ ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
+ << CALIB_SHIFT_IBAT)
+ / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+
+ gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
+ gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
+ V2A_gain + V2A_offset;
+ } else {
+ gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
+ }
- gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 -
- (CALIB_SCALE * (19500 - 315) /
- (vmain_high - vmain_low)) * vmain_high;
+ dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
+ gpadc->cal_data[ADC_INPUT_IBAT].gain,
+ gpadc->cal_data[ADC_INPUT_IBAT].offset);
} else {
- gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ /* Calculate gain and offset for VMAIN if all reads succeeded */
+ if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+ ((gpadc_cal[1] & 0x3F) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+ 19500 - (CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ }
}
/* Calculate gain and offset for BTEMP if all reads succeeded */
if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
- (gpadc_cal[3] << 1) |
- ((gpadc_cal[4] & 0x80) >> 7));
-
+ (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
+ gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
+ gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
+
gpadc->cal_data[ADC_INPUT_BTEMP].gain =
CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-
gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
- (CALIB_SCALE * (1300 - 21) /
- (btemp_high - btemp_low)) * btemp_high;
+ (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+ * btemp_high;
} else {
gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
}
@@ -560,9 +842,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
+ gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
+ gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
+
gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
(4700 - 2380) / (vbat_high - vbat_low);
-
gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
(CALIB_SCALE * (4700 - 2380) /
(vbat_high - vbat_low)) * vbat_high;
@@ -608,6 +892,31 @@ static int ab8500_gpadc_runtime_idle(struct device *dev)
return 0;
}
+static int ab8500_gpadc_suspend(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ mutex_lock(&gpadc->ab8500_gpadc_lock);
+
+ pm_runtime_get_sync(dev);
+
+ regulator_disable(gpadc->regu);
+ return 0;
+}
+
+static int ab8500_gpadc_resume(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ regulator_enable(gpadc->regu);
+
+ pm_runtime_mark_last_busy(gpadc->dev);
+ pm_runtime_put_autosuspend(gpadc->dev);
+
+ mutex_unlock(&gpadc->ab8500_gpadc_lock);
+ return 0;
+}
+
static int ab8500_gpadc_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -619,13 +928,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
return -ENOMEM;
}
- gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
- if (gpadc->irq < 0) {
- dev_err(&pdev->dev, "failed to get platform irq-%d\n",
- gpadc->irq);
- ret = gpadc->irq;
- goto fail;
- }
+ gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+ if (gpadc->irq_sw < 0)
+ dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
+
+ gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+ if (gpadc->irq_hw < 0)
+ dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
gpadc->dev = &pdev->dev;
gpadc->parent = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +943,31 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
/* Initialize completion used to notify completion of conversion */
init_completion(&gpadc->ab8500_gpadc_complete);
- /* Register interrupt - SwAdcComplete */
- ret = request_threaded_irq(gpadc->irq, NULL,
- ab8500_bm_gpswadcconvend_handler,
- IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED,
- "ab8500-gpadc", gpadc);
- if (ret < 0) {
- dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
- gpadc->irq);
- goto fail;
+ /* Register interrupts */
+ if (gpadc->irq_sw >= 0) {
+ ret = request_threaded_irq(gpadc->irq_sw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw",
+ gpadc);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "Failed to register interrupt irq: %d\n",
+ gpadc->irq_sw);
+ goto fail;
+ }
+ }
+
+ if (gpadc->irq_hw >= 0) {
+ ret = request_threaded_irq(gpadc->irq_hw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw",
+ gpadc);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "Failed to register interrupt irq: %d\n",
+ gpadc->irq_hw);
+ goto fail_irq;
+ }
}
/* VTVout LDO used to power up ab8500-GPADC */
@@ -669,11 +994,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
ab8500_gpadc_read_calibration_data(gpadc);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
+
return 0;
fail_enable:
fail_irq:
- free_irq(gpadc->irq, gpadc);
+ free_irq(gpadc->irq_sw, gpadc);
+ free_irq(gpadc->irq_hw, gpadc);
fail:
kfree(gpadc);
gpadc = NULL;
@@ -687,7 +1014,10 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
/* remove this gpadc entry from the list */
list_del(&gpadc->node);
/* remove interrupt - completion of Sw ADC conversion */
- free_irq(gpadc->irq, gpadc);
+ if (gpadc->irq_sw >= 0)
+ free_irq(gpadc->irq_sw, gpadc);
+ if (gpadc->irq_hw >= 0)
+ free_irq(gpadc->irq_hw, gpadc);
pm_runtime_get_sync(gpadc->dev);
pm_runtime_disable(gpadc->dev);
@@ -707,6 +1037,9 @@ static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
ab8500_gpadc_runtime_resume,
ab8500_gpadc_runtime_idle)
+ SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
+ ab8500_gpadc_resume)
+
};
static struct platform_driver ab8500_gpadc_driver = {
@@ -729,10 +1062,30 @@ static void __exit ab8500_gpadc_exit(void)
platform_driver_unregister(&ab8500_gpadc_driver);
}
+/**
+ * ab8540_gpadc_get_otp() - returns OTP values
+ *
+ */
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+ u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+ u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
+{
+ *vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
+ *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
+ *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
+ *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
+ *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+ *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+ *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+ *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
+ return ;
+}
+
subsys_initcall_sync(ab8500_gpadc_init);
module_exit(ab8500_gpadc_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+ "M'boumba Cedric Madianga");
MODULE_ALIAS("platform:ab8500_gpadc");
MODULE_DESCRIPTION("AB8500 GPADC driver");