10 files changed, 545 insertions, 253 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de67fe83efd3..2ddfc11b8f2b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -266,8 +266,8 @@ config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
-config MFD_MAX597X
-	tristate "Maxim 597x power switch and monitor"
+config MFD_MAX5970
+	tristate "Maxim 5970/5978 power switch and monitor"
 	depends on (I2C && OF)
 	select MFD_SIMPLE_MFD_I2C
 	help
@@ -1183,12 +1183,17 @@ config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.
 
-config MFD_RK808
+config MFD_RK8XX
+	bool
+	select MFD_CORE
+
+config MFD_RK8XX_I2C
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
+	select MFD_RK8XX
 	help
 	  If you say yes here you get support for the RK805, RK808, RK809,
 	  RK817 and RK818 Power Management chips.
@@ -1196,6 +1201,20 @@ config MFD_RK808
 	  through I2C interface. The device supports multiple sub-devices
 	  including interrupts, RTC, LDO & DCDC regulators, and onkey.
 
+config MFD_RK8XX_SPI
+	tristate "Rockchip RK806 Power Management Chip"
+	depends on SPI && OF
+	select MFD_CORE
+	select REGMAP_SPI
+	select REGMAP_IRQ
+	select MFD_RK8XX
+	help
+	  If you say yes here you get support for the RK806 Power Management
+	  chip.
+	  This driver provides common support for accessing the device
+	  through an SPI interface. The device supports multiple sub-devices
+	  including interrupts, LDO & DCDC regulators, and power on-key.
+
 config MFD_RN5T618
 	tristate "Ricoh RN5T567/618 PMIC"
 	depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 40b0bf8eace6..39c461536181 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -217,7 +217,9 @@ obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
-obj-$(CONFIG_MFD_RK808)		+= rk808.o
+obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
+obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
+obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index b4f5cb457117..a49e5e217554 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -63,6 +63,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+	{ .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID },
 	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
 	{ .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID },
@@ -77,6 +78,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp209", 0 },
 	{ "axp221", 0 },
 	{ "axp223", 0 },
+	{ "axp313a", 0 },
 	{ "axp803", 0 },
 	{ "axp806", 0 },
 	{ "axp15060", 0 },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 72b87aae60cc..07a846ecbf18 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -39,6 +39,7 @@ static const char * const axp20x_model_names[] = {
 	"AXP221",
 	"AXP223",
 	"AXP288",
+	"AXP313a",
 	"AXP803",
 	"AXP806",
 	"AXP809",
@@ -156,6 +157,25 @@ static const struct regmap_range axp806_writeable_ranges[] = {
 	regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
 };
 
+static const struct regmap_range axp313a_writeable_ranges[] = {
+	regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_range axp313a_volatile_ranges[] = {
+	regmap_reg_range(AXP313A_SHUTDOWN_CTRL, AXP313A_SHUTDOWN_CTRL),
+	regmap_reg_range(AXP313A_IRQ_STATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_access_table axp313a_writeable_table = {
+	.yes_ranges = axp313a_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
+};
+
+static const struct regmap_access_table axp313a_volatile_table = {
+	.yes_ranges = axp313a_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
+};
+
 static const struct regmap_range axp806_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
 };
@@ -248,6 +268,11 @@ static const struct resource axp288_fuel_gauge_resources[] = {
 	DEFINE_RES_IRQ(AXP288_IRQ_WL1),
 };
 
+static const struct resource axp313a_pek_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
+	DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
+};
+
 static const struct resource axp803_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -304,6 +329,15 @@ static const struct regmap_config axp288_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
+static const struct regmap_config axp313a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.wr_table = &axp313a_writeable_table,
+	.volatile_table = &axp313a_volatile_table,
+	.max_register = AXP313A_IRQ_STATE,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static const struct regmap_config axp806_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -456,6 +490,16 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1),
 };
 
+static const struct regmap_irq axp313a_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP313A, PEK_RIS_EDGE,		0, 7),
+	INIT_REGMAP_IRQ(AXP313A, PEK_FAL_EDGE,		0, 6),
+	INIT_REGMAP_IRQ(AXP313A, PEK_SHORT,		0, 5),
+	INIT_REGMAP_IRQ(AXP313A, PEK_LONG,		0, 4),
+	INIT_REGMAP_IRQ(AXP313A, DCDC3_V_LOW,		0, 3),
+	INIT_REGMAP_IRQ(AXP313A, DCDC2_V_LOW,		0, 2),
+	INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH,		0, 0),
+};
+
 static const struct regmap_irq axp803_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V,		0, 7),
 	INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN,		0, 6),
@@ -606,6 +650,17 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
 
 };
 
+static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
+	.name			= "axp313a_irq_chip",
+	.status_base		= AXP313A_IRQ_STATE,
+	.ack_base		= AXP313A_IRQ_STATE,
+	.unmask_base		= AXP313A_IRQ_EN,
+	.init_ack_masked	= true,
+	.irqs			= axp313a_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp313a_regmap_irqs),
+	.num_regs		= 1,
+};
+
 static const struct regmap_irq_chip axp803_regmap_irq_chip = {
 	.name			= "axp803",
 	.status_base		= AXP20X_IRQ1_STATE,
@@ -745,6 +800,11 @@ static const struct mfd_cell axp152_cells[] = {
 	},
 };
 
+static struct mfd_cell axp313a_cells[] = {
+	MFD_CELL_NAME("axp20x-regulator"),
+	MFD_CELL_RES("axp313a-pek", axp313a_pek_resources),
+};
+
 static const struct resource axp288_adc_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
 };
@@ -914,8 +974,18 @@ static const struct mfd_cell axp_regulator_only_cells[] = {
 static int axp20x_power_off(struct sys_off_data *data)
 {
 	struct axp20x_dev *axp20x = data->cb_data;
+	unsigned int shutdown_reg;
 
-	regmap_write(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF);
+	switch (axp20x->variant) {
+	case AXP313A_ID:
+		shutdown_reg = AXP313A_SHUTDOWN_CTRL;
+		break;
+	default:
+		shutdown_reg = AXP20X_OFF_CTRL;
+		break;
+	}
+
+	regmap_write(axp20x->regmap, shutdown_reg, AXP20X_OFF);
 
 	/* Give capacitors etc. time to drain to avoid kernel panic msg. */
 	mdelay(500);
@@ -978,6 +1048,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
 		axp20x->irq_flags = IRQF_TRIGGER_LOW;
 		break;
+	case AXP313A_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
+		axp20x->cells = axp313a_cells;
+		axp20x->regmap_cfg = &axp313a_regmap_config;
+		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
+		break;
 	case AXP803_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
 		axp20x->cells = axp803_cells;
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk8xx-core.c
index 0f22ef61e817..e8fc9e2ab1d0 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -1,18 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * MFD core driver for Rockchip RK808/RK818
+ * MFD core driver for Rockchip RK8XX
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
- *
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- *
  * Author: Wadim Egorov <w.egorov@phytec.de>
  */
 
-#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/rk808.h>
 #include <linux/mfd/core.h>
@@ -27,92 +24,6 @@ struct rk808_reg_data {
 	int value;
 };
 
-static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
-	 *   bits are cleared in case when we shutoff anyway, but better safe.
-	 */
-
-	switch (reg) {
-	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
-	case RK808_RTC_STATUS_REG:
-	case RK808_VB_MON_REG:
-	case RK808_THERMAL_REG:
-	case RK808_DCDC_UV_STS_REG:
-	case RK808_LDO_UV_STS_REG:
-	case RK808_DCDC_PG_REG:
-	case RK808_LDO_PG_REG:
-	case RK808_DEVCTRL_REG:
-	case RK808_INT_STS_REG1:
-	case RK808_INT_STS_REG2:
-		return true;
-	}
-
-	return false;
-}
-
-static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 */
-
-	switch (reg) {
-	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
-	case RK817_RTC_STATUS_REG:
-	case RK817_CODEC_DTOP_LPT_SRST:
-	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
-	case RK817_PMIC_CHRG_STS:
-	case RK817_PMIC_CHRG_OUT:
-	case RK817_PMIC_CHRG_IN:
-	case RK817_INT_STS_REG0:
-	case RK817_INT_STS_REG1:
-	case RK817_INT_STS_REG2:
-	case RK817_SYS_STS:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config rk818_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK818_USB_CTRL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk805_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK805_OFF_SOURCE_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk808_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK808_IO_POL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk817_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK817_GPIO_INT_CFG,
-	.cache_type = REGCACHE_NONE,
-	.volatile_reg = rk817_is_volatile_reg,
-};
-
 static const struct resource rtc_resources[] = {
 	DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM),
 };
@@ -126,6 +37,11 @@ static const struct resource rk805_key_resources[] = {
 	DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
 };
 
+static struct resource rk806_pwrkey_resources[] = {
+	DEFINE_RES_IRQ(RK806_IRQ_PWRON_FALL),
+	DEFINE_RES_IRQ(RK806_IRQ_PWRON_RISE),
+};
+
 static const struct resource rk817_pwrkey_resources[] = {
 	DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
 	DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
@@ -153,6 +69,17 @@ static const struct mfd_cell rk805s[] = {
 	},
 };
 
+static const struct mfd_cell rk806s[] = {
+	{ .name = "rk805-pinctrl", .id = PLATFORM_DEVID_AUTO, },
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_AUTO, },
+	{
+		.name = "rk805-pwrkey",
+		.resources = rk806_pwrkey_resources,
+		.num_resources = ARRAY_SIZE(rk806_pwrkey_resources),
+		.id = PLATFORM_DEVID_AUTO,
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
 	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
@@ -212,6 +139,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
 	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
 };
 
+static const struct rk808_reg_data rk806_pre_init_reg[] = {
+	{ RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L },
+	{ RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN },
+	{ RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN },
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -362,6 +295,27 @@ static const struct regmap_irq rk805_irqs[] = {
 	},
 };
 
+static const struct regmap_irq rk806_irqs[] = {
+	/* INT_STS0 IRQs */
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_FALL, 0, RK806_INT_STS_PWRON_FALL),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_RISE, 0, RK806_INT_STS_PWRON_RISE),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON, 0, RK806_INT_STS_PWRON),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_LP, 0, RK806_INT_STS_PWRON_LP),
+	REGMAP_IRQ_REG(RK806_IRQ_HOTDIE, 0, RK806_INT_STS_HOTDIE),
+	REGMAP_IRQ_REG(RK806_IRQ_VDC_RISE, 0, RK806_INT_STS_VDC_RISE),
+	REGMAP_IRQ_REG(RK806_IRQ_VDC_FALL, 0, RK806_INT_STS_VDC_FALL),
+	REGMAP_IRQ_REG(RK806_IRQ_VB_LO, 0, RK806_INT_STS_VB_LO),
+	/* INT_STS1 IRQs */
+	REGMAP_IRQ_REG(RK806_IRQ_REV0, 1, RK806_INT_STS_REV0),
+	REGMAP_IRQ_REG(RK806_IRQ_REV1, 1, RK806_INT_STS_REV1),
+	REGMAP_IRQ_REG(RK806_IRQ_REV2, 1, RK806_INT_STS_REV2),
+	REGMAP_IRQ_REG(RK806_IRQ_CRC_ERROR, 1, RK806_INT_STS_CRC_ERROR),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP3_GPIO, 1, RK806_INT_STS_SLP3_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP2_GPIO, 1, RK806_INT_STS_SLP2_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP1_GPIO, 1, RK806_INT_STS_SLP1_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_WDT, 1, RK806_INT_STS_WDT),
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -512,6 +466,18 @@ static struct regmap_irq_chip rk805_irq_chip = {
 	.init_ack_masked = true,
 };
 
+static struct regmap_irq_chip rk806_irq_chip = {
+	.name = "rk806",
+	.irqs = rk806_irqs,
+	.num_irqs = ARRAY_SIZE(rk806_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.mask_base = RK806_INT_MSK0,
+	.status_base = RK806_INT_STS0,
+	.ack_base = RK806_INT_STS0,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -548,13 +514,11 @@ static const struct regmap_irq_chip rk818_irq_chip = {
 	.init_ack_masked = true,
 };
 
-static struct i2c_client *rk808_i2c_client;
-
-static void rk808_pm_power_off(void)
+static int rk808_power_off(struct sys_off_data *data)
 {
+	struct rk808 *rk808 = data->cb_data;
 	int ret;
 	unsigned int reg, bit;
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
 
 	switch (rk808->variant) {
 	case RK805_ID:
@@ -575,16 +539,18 @@ static void rk808_pm_power_off(void)
 		bit = DEV_OFF;
 		break;
 	default:
-		return;
+		return NOTIFY_DONE;
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
+		dev_err(rk808->dev, "Failed to shutdown device!\n");
+
+	return NOTIFY_DONE;
 }
 
-static int rk808_restart_notify(struct notifier_block *this, unsigned long mode, void *cmd)
+static int rk808_restart(struct sys_off_data *data)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	struct rk808 *rk808 = data->cb_data;
 	unsigned int reg, bit;
 	int ret;
 
@@ -600,19 +566,14 @@ static int rk808_restart_notify(struct notifier_block *this, unsigned long mode,
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to restart device!\n");
+		dev_err(rk808->dev, "Failed to restart device!\n");
 
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block rk808_restart_handler = {
-	.notifier_call = rk808_restart_notify,
-	.priority = 192,
-};
-
-static void rk8xx_shutdown(struct i2c_client *client)
+void rk8xx_shutdown(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(client);
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret;
 
 	switch (rk808->variant) {
@@ -633,75 +594,47 @@ static void rk8xx_shutdown(struct i2c_client *client)
 		return;
 	}
 	if (ret)
-		dev_warn(&client->dev,
+		dev_warn(dev,
 			 "Cannot switch to power down function\n");
 }
+EXPORT_SYMBOL_GPL(rk8xx_shutdown);
 
-static const struct of_device_id rk808_of_match[] = {
-	{ .compatible = "rockchip,rk805" },
-	{ .compatible = "rockchip,rk808" },
-	{ .compatible = "rockchip,rk809" },
-	{ .compatible = "rockchip,rk817" },
-	{ .compatible = "rockchip,rk818" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
-static int rk808_probe(struct i2c_client *client)
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap)
 {
-	struct device_node *np = client->dev.of_node;
 	struct rk808 *rk808;
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
+	int dual_support = 0;
 	int nr_pre_init_regs;
 	int nr_cells;
-	int msb, lsb;
-	unsigned char pmic_id_msb, pmic_id_lsb;
 	int ret;
 	int i;
 
-	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+	rk808 = devm_kzalloc(dev, sizeof(*rk808), GFP_KERNEL);
 	if (!rk808)
 		return -ENOMEM;
-
-	if (of_device_is_compatible(np, "rockchip,rk817") ||
-	    of_device_is_compatible(np, "rockchip,rk809")) {
-		pmic_id_msb = RK817_ID_MSB;
-		pmic_id_lsb = RK817_ID_LSB;
-	} else {
-		pmic_id_msb = RK808_ID_MSB;
-		pmic_id_lsb = RK808_ID_LSB;
-	}
-
-	/* Read chip variant */
-	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
-	if (msb < 0) {
-		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
-			RK808_ID_MSB);
-		return msb;
-	}
-
-	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
-	if (lsb < 0) {
-		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
-			RK808_ID_LSB);
-		return lsb;
-	}
-
-	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
+	rk808->dev = dev;
+	rk808->variant = variant;
+	rk808->regmap = regmap;
+	dev_set_drvdata(dev, rk808);
 
 	switch (rk808->variant) {
 	case RK805_ID:
-		rk808->regmap_cfg = &rk805_regmap_config;
 		rk808->regmap_irq_chip = &rk805_irq_chip;
 		pre_init_reg = rk805_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
 		cells = rk805s;
 		nr_cells = ARRAY_SIZE(rk805s);
 		break;
+	case RK806_ID:
+		rk808->regmap_irq_chip = &rk806_irq_chip;
+		pre_init_reg = rk806_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
+		cells = rk806s;
+		nr_cells = ARRAY_SIZE(rk806s);
+		dual_support = IRQF_SHARED;
+		break;
 	case RK808_ID:
-		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
 		pre_init_reg = rk808_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
@@ -709,7 +642,6 @@ static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk808s);
 		break;
 	case RK818_ID:
-		rk808->regmap_cfg = &rk818_regmap_config;
 		rk808->regmap_irq_chip = &rk818_irq_chip;
 		pre_init_reg = rk818_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
@@ -718,7 +650,6 @@ static int rk808_probe(struct i2c_client *client)
 		break;
 	case RK809_ID:
 	case RK817_ID:
-		rk808->regmap_cfg = &rk817_regmap_config;
 		rk808->regmap_irq_chip = &rk817_irq_chip;
 		pre_init_reg = rk817_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
@@ -726,97 +657,64 @@ static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk817s);
 		break;
 	default:
-		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
-			rk808->variant);
+		dev_err(dev, "Unsupported RK8XX ID %lu\n", rk808->variant);
 		return -EINVAL;
 	}
 
-	rk808->i2c = client;
-	i2c_set_clientdata(client, rk808);
-
-	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
-	if (IS_ERR(rk808->regmap)) {
-		dev_err(&client->dev, "regmap initialization failed\n");
-		return PTR_ERR(rk808->regmap);
-	}
-
-	if (!client->irq) {
-		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
-		return -EINVAL;
-	}
+	if (!irq)
+		return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
-	ret = regmap_add_irq_chip(rk808->regmap, client->irq,
-				  IRQF_ONESHOT, -1,
-				  rk808->regmap_irq_chip, &rk808->irq_data);
-	if (ret) {
-		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
-		return ret;
-	}
+	ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
+				       IRQF_ONESHOT | dual_support, -1,
+				       rk808->regmap_irq_chip, &rk808->irq_data);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
 
 	for (i = 0; i < nr_pre_init_regs; i++) {
 		ret = regmap_update_bits(rk808->regmap,
 					pre_init_reg[i].addr,
 					pre_init_reg[i].mask,
 					pre_init_reg[i].value);
-		if (ret) {
-			dev_err(&client->dev,
-				"0x%x write err\n",
-				pre_init_reg[i].addr);
-			return ret;
-		}
+		if (ret)
+			return dev_err_probe(dev, ret, "0x%x write err\n",
+					     pre_init_reg[i].addr);
 	}
 
-	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
-			      cells, nr_cells, NULL, 0,
+	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
 			      regmap_irq_get_domain(rk808->irq_data));
-	if (ret) {
-		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
-		goto err_irq;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add MFD devices\n");
 
-	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
-		rk808_i2c_client = client;
-		pm_power_off = rk808_pm_power_off;
+	if (device_property_read_bool(dev, "rockchip,system-power-controller")) {
+		ret = devm_register_sys_off_handler(dev,
+				    SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH,
+				    &rk808_power_off, rk808);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "failed to register poweroff handler\n");
 
 		switch (rk808->variant) {
 		case RK809_ID:
 		case RK817_ID:
-			ret = register_restart_handler(&rk808_restart_handler);
+			ret = devm_register_sys_off_handler(dev,
+							    SYS_OFF_MODE_RESTART, SYS_OFF_PRIO_HIGH,
+							    &rk808_restart, rk808);
 			if (ret)
-				dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
+				dev_warn(dev, "failed to register rst handler, %d\n", ret);
 			break;
 		default:
-			dev_dbg(&client->dev, "pmic controlled board reset not supported\n");
+			dev_dbg(dev, "pmic controlled board reset not supported\n");
 			break;
 		}
 	}
 
 	return 0;
-
-err_irq:
-	regmap_del_irq_chip(client->irq, rk808->irq_data);
-	return ret;
 }
+EXPORT_SYMBOL_GPL(rk8xx_probe);
 
-static void rk808_remove(struct i2c_client *client)
+int rk8xx_suspend(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(client);
-
-	regmap_del_irq_chip(client->irq, rk808->irq_data);
-
-	/**
-	 * pm_power_off may points to a function from another module.
-	 * Check if the pointer is set by us and only then overwrite it.
-	 */
-	if (pm_power_off == rk808_pm_power_off)
-		pm_power_off = NULL;
-
-	unregister_restart_handler(&rk808_restart_handler);
-}
-
-static int __maybe_unused rk8xx_suspend(struct device *dev)
-{
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -839,10 +737,11 @@ static int __maybe_unused rk8xx_suspend(struct device *dev)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(rk8xx_suspend);
 
-static int __maybe_unused rk8xx_resume(struct device *dev)
+int rk8xx_resume(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -859,23 +758,10 @@ static int __maybe_unused rk8xx_resume(struct device *dev)
 
 	return ret;
 }
-static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
-
-static struct i2c_driver rk808_i2c_driver = {
-	.driver = {
-		.name = "rk808",
-		.of_match_table = rk808_of_match,
-		.pm = &rk8xx_pm_ops,
-	},
-	.probe_new = rk808_probe,
-	.remove   = rk808_remove,
-	.shutdown = rk8xx_shutdown,
-};
-
-module_i2c_driver(rk808_i2c_driver);
+EXPORT_SYMBOL_GPL(rk8xx_resume);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
-MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
+MODULE_DESCRIPTION("RK8xx PMIC core");
diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c
new file mode 100644
index 000000000000..2822bfa8a04a
--- /dev/null
+++ b/drivers/mfd/rk8xx-i2c.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip RK808/RK818 Core (I2C) driver
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+struct rk8xx_i2c_platform_data {
+	const struct regmap_config *regmap_cfg;
+	int variant;
+};
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+	 *   bits are cleared in case when we shutoff anyway, but better safe.
+	 */
+
+	switch (reg) {
+	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+	case RK808_RTC_STATUS_REG:
+	case RK808_VB_MON_REG:
+	case RK808_THERMAL_REG:
+	case RK808_DCDC_UV_STS_REG:
+	case RK808_LDO_UV_STS_REG:
+	case RK808_DCDC_PG_REG:
+	case RK808_LDO_PG_REG:
+	case RK808_DEVCTRL_REG:
+	case RK808_INT_STS_REG1:
+	case RK808_INT_STS_REG2:
+		return true;
+	}
+
+	return false;
+}
+
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 */
+
+	switch (reg) {
+	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+	case RK817_RTC_STATUS_REG:
+	case RK817_CODEC_DTOP_LPT_SRST:
+	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
+	case RK817_PMIC_CHRG_STS:
+	case RK817_PMIC_CHRG_OUT:
+	case RK817_PMIC_CHRG_IN:
+	case RK817_INT_STS_REG0:
+	case RK817_INT_STS_REG1:
+	case RK817_INT_STS_REG2:
+	case RK817_SYS_STS:
+		return true;
+	}
+
+	return false;
+}
+
+
+static const struct regmap_config rk818_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK818_USB_CTRL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk808_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK808_IO_POL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk817_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK817_GPIO_INT_CFG,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = rk817_is_volatile_reg,
+};
+
+static const struct rk8xx_i2c_platform_data rk805_data = {
+	.regmap_cfg = &rk805_regmap_config,
+	.variant = RK805_ID,
+};
+
+static const struct rk8xx_i2c_platform_data rk808_data = {
+	.regmap_cfg = &rk808_regmap_config,
+	.variant = RK808_ID,
+};
+
+static const struct rk8xx_i2c_platform_data rk809_data = {
+	.regmap_cfg = &rk817_regmap_config,
+	.variant = RK809_ID,
+};
+
+static const struct rk8xx_i2c_platform_data rk817_data = {
+	.regmap_cfg = &rk817_regmap_config,
+	.variant = RK817_ID,
+};
+
+static const struct rk8xx_i2c_platform_data rk818_data = {
+	.regmap_cfg = &rk818_regmap_config,
+	.variant = RK818_ID,
+};
+
+static int rk8xx_i2c_probe(struct i2c_client *client)
+{
+	const struct rk8xx_i2c_platform_data *data;
+	struct regmap *regmap;
+
+	data = device_get_match_data(&client->dev);
+	if (!data)
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, data->regmap_cfg);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "regmap initialization failed\n");
+
+	return rk8xx_probe(&client->dev, data->variant, client->irq, regmap);
+}
+
+static void rk8xx_i2c_shutdown(struct i2c_client *client)
+{
+	rk8xx_shutdown(&client->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume);
+
+static const struct of_device_id rk8xx_i2c_of_match[] = {
+	{ .compatible = "rockchip,rk805", .data = &rk805_data },
+	{ .compatible = "rockchip,rk808", .data = &rk808_data },
+	{ .compatible = "rockchip,rk809", .data = &rk809_data },
+	{ .compatible = "rockchip,rk817", .data = &rk817_data },
+	{ .compatible = "rockchip,rk818", .data = &rk818_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match);
+
+static struct i2c_driver rk8xx_i2c_driver = {
+	.driver = {
+		.name = "rk8xx-i2c",
+		.of_match_table = rk8xx_i2c_of_match,
+		.pm = &rk8xx_i2c_pm_ops,
+	},
+	.probe_new = rk8xx_i2c_probe,
+	.shutdown  = rk8xx_i2c_shutdown,
+};
+module_i2c_driver(rk8xx_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK8xx I2C PMIC driver");
diff --git a/drivers/mfd/rk8xx-spi.c b/drivers/mfd/rk8xx-spi.c
new file mode 100644
index 000000000000..fd137f38c2c4
--- /dev/null
+++ b/drivers/mfd/rk8xx-spi.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip RK806 Core (SPI) driver
+ *
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Collabora Ltd.
+ *
+ * Author: Xu Shengfei <xsf@rock-chips.com>
+ * Author: Sebastian Reichel <sebastian.reichel@collabora.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#define RK806_ADDR_SIZE 2
+#define RK806_CMD_WITH_SIZE(CMD, VALUE_BYTES) \
+	(RK806_CMD_##CMD | RK806_CMD_CRC_DIS | (VALUE_BYTES - 1))
+
+static const struct regmap_range rk806_volatile_ranges[] = {
+	regmap_reg_range(RK806_POWER_EN0, RK806_POWER_EN5),
+	regmap_reg_range(RK806_DVS_START_CTRL, RK806_INT_MSK1),
+};
+
+static const struct regmap_access_table rk806_volatile_table = {
+	.yes_ranges = rk806_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rk806_volatile_ranges),
+};
+
+static const struct regmap_config rk806_regmap_config_spi = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = RK806_BUCK_RSERVE_REG5,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &rk806_volatile_table,
+};
+
+static int rk806_spi_bus_write(void *context, const void *vdata, size_t count)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_transfer xfer[2] = { 0 };
+	/* data and thus count includes the register address */
+	size_t val_size = count - RK806_ADDR_SIZE;
+	char cmd;
+
+	if (val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+		return -EINVAL;
+
+	cmd = RK806_CMD_WITH_SIZE(WRITE, val_size);
+
+	xfer[0].tx_buf = &cmd;
+	xfer[0].len = sizeof(cmd);
+	xfer[1].tx_buf = vdata;
+	xfer[1].len = count;
+
+	return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static int rk806_spi_bus_read(void *context, const void *vreg, size_t reg_size,
+			      void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	char txbuf[3] = { 0 };
+
+	if (reg_size != RK806_ADDR_SIZE ||
+	    val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+		return -EINVAL;
+
+	/* TX buffer contains command byte followed by two address bytes */
+	txbuf[0] = RK806_CMD_WITH_SIZE(READ, val_size);
+	memcpy(txbuf+1, vreg, reg_size);
+
+	return spi_write_then_read(spi, txbuf, sizeof(txbuf), val, val_size);
+}
+
+static const struct regmap_bus rk806_regmap_bus_spi = {
+	.write = rk806_spi_bus_write,
+	.read = rk806_spi_bus_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+static int rk8xx_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init(&spi->dev, &rk806_regmap_bus_spi,
+				  &spi->dev, &rk806_regmap_config_spi);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+				     "Failed to init regmap\n");
+
+	return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap);
+}
+
+static const struct of_device_id rk8xx_spi_of_match[] = {
+	{ .compatible = "rockchip,rk806", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rk8xx_spi_of_match);
+
+static const struct spi_device_id rk8xx_spi_id_table[] = {
+	{ "rk806", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, rk8xx_spi_id_table);
+
+static struct spi_driver rk8xx_spi_driver = {
+	.driver		= {
+		.name	= "rk8xx-spi",
+		.of_match_table = rk8xx_spi_of_match,
+	},
+	.probe		= rk8xx_spi_probe,
+	.id_table	= rk8xx_spi_id_table,
+};
+module_spi_driver(rk8xx_spi_driver);
+
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
+MODULE_DESCRIPTION("RK8xx SPI PMIC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
index a5e520fe50a1..3eee4242ee02 100644
--- a/drivers/mfd/rt5033.c
+++ b/drivers/mfd/rt5033.c
@@ -41,9 +41,6 @@ static const struct mfd_cell rt5033_devs[] = {
 		.name = "rt5033-charger",
 		.of_compatible = "richtek,rt5033-charger",
 	}, {
-		.name = "rt5033-battery",
-		.of_compatible = "richtek,rt5033-battery",
-	}, {
 		.name = "rt5033-led",
 		.of_compatible = "richtek,rt5033-led",
 	},
@@ -58,7 +55,7 @@ static const struct regmap_config rt5033_regmap_config = {
 static int rt5033_i2c_probe(struct i2c_client *i2c)
 {
 	struct rt5033_dev *rt5033;
-	unsigned int dev_id;
+	unsigned int dev_id, chip_rev;
 	int ret;
 
 	rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
@@ -81,7 +78,8 @@ static int rt5033_i2c_probe(struct i2c_client *i2c)
 		dev_err(&i2c->dev, "Device not found\n");
 		return -ENODEV;
 	}
-	dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id);
+	chip_rev = dev_id & RT5033_CHIP_REV_MASK;
+	dev_info(&i2c->dev, "Device found (rev. %d)\n", chip_rev);
 
 	ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 20782b4dd172..1f1c007560d8 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
 	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
 };
 
-static const struct mfd_cell max597x_cells[] = {
-	{ .name = "max597x-regulator", },
-	{ .name = "max597x-iio", },
-	{ .name = "max597x-led", },
+static const struct mfd_cell max5970_cells[] = {
+	{ .name = "max5970-regulator", },
+	{ .name = "max5970-iio", },
+	{ .name = "max5970-led", },
 };
 
-static const struct simple_mfd_data maxim_max597x = {
-	.mfd_cell = max597x_cells,
-	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
+static const struct simple_mfd_data maxim_max5970 = {
+	.mfd_cell = max5970_cells,
+	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
 };
 
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
 	{ .compatible = "kontron,sl28cpld" },
 	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
-	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
-	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
+	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
+	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
 	{}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index e982119bbefa..523439a16b7c 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -608,7 +608,7 @@ static const struct regmap_config twl6040_regmap_config = {
 	.volatile_reg = twl6040_volatile_reg,
 	.writeable_reg = twl6040_writeable_reg,
 
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.use_single_read = true,
 	.use_single_write = true,
 };