summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/bd9571mwv.c2
-rw-r--r--drivers/mfd/cros_ec.c19
-rw-r--r--drivers/mfd/cros_ec_spi.c24
-rw-r--r--drivers/mfd/intel_quark_i2c_gpio.c3
-rw-r--r--drivers/mfd/qcom-pm8xxx.c4
5 files changed, 33 insertions, 19 deletions
diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
index 64e088dfe7b0..503979c81dae 100644
--- a/drivers/mfd/bd9571mwv.c
+++ b/drivers/mfd/bd9571mwv.c
@@ -29,6 +29,7 @@ static const struct mfd_cell bd9571mwv_cells[] = {
static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
@@ -44,6 +45,7 @@ static const struct regmap_access_table bd9571mwv_readable_table = {
};
static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 58e05069163e..65a9757a6d21 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -216,7 +216,7 @@ int cros_ec_suspend(struct cros_ec_device *ec_dev)
}
EXPORT_SYMBOL(cros_ec_suspend);
-static void cros_ec_drain_events(struct cros_ec_device *ec_dev)
+static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
{
while (cros_ec_get_next_event(ec_dev, NULL) > 0)
blocking_notifier_call_chain(&ec_dev->event_notifier,
@@ -240,21 +240,16 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
dev_dbg(ec_dev->dev, "Error %d sending resume event to ec",
ret);
- /*
- * In some cases, we need to distinguish between events that occur
- * during suspend if the EC is not a wake source. For example,
- * keypresses during suspend should be discarded if it does not wake
- * the system.
- *
- * If the EC is not a wake source, drain the event queue and mark them
- * as "queued during suspend".
- */
if (ec_dev->wake_enabled) {
disable_irq_wake(ec_dev->irq);
ec_dev->wake_enabled = 0;
- } else {
- cros_ec_drain_events(ec_dev);
}
+ /*
+ * Let the mfd devices know about events that occur during
+ * suspend. This way the clients know what to do with them.
+ */
+ cros_ec_report_events_during_suspend(ec_dev);
+
return 0;
}
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 1b52b8557034..2060d1483043 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -419,10 +419,25 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
/* Verify that EC can process command */
for (i = 0; i < len; i++) {
rx_byte = rx_buf[i];
+ /*
+ * Seeing the PAST_END, RX_BAD_DATA, or NOT_READY
+ * markers are all signs that the EC didn't fully
+ * receive our command. e.g., if the EC is flashing
+ * itself, it can't respond to any commands and instead
+ * clocks out EC_SPI_PAST_END from its SPI hardware
+ * buffer. Similar occurrences can happen if the AP is
+ * too slow to clock out data after asserting CS -- the
+ * EC will abort and fill its buffer with
+ * EC_SPI_RX_BAD_DATA.
+ *
+ * In all cases, these errors should be safe to retry.
+ * Report -EAGAIN and let the caller decide what to do
+ * about that.
+ */
if (rx_byte == EC_SPI_PAST_END ||
rx_byte == EC_SPI_RX_BAD_DATA ||
rx_byte == EC_SPI_NOT_READY) {
- ret = -EREMOTEIO;
+ ret = -EAGAIN;
break;
}
}
@@ -431,7 +446,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
if (!ret)
ret = cros_ec_spi_receive_packet(ec_dev,
ec_msg->insize + sizeof(*response));
- else
+ else if (ret != -EAGAIN)
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
final_ret = terminate_request(ec_dev);
@@ -537,10 +552,11 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
/* Verify that EC can process command */
for (i = 0; i < len; i++) {
rx_byte = rx_buf[i];
+ /* See comments in cros_ec_pkt_xfer_spi() */
if (rx_byte == EC_SPI_PAST_END ||
rx_byte == EC_SPI_RX_BAD_DATA ||
rx_byte == EC_SPI_NOT_READY) {
- ret = -EREMOTEIO;
+ ret = -EAGAIN;
break;
}
}
@@ -549,7 +565,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
if (!ret)
ret = cros_ec_spi_receive_response(ec_dev,
ec_msg->insize + EC_MSG_TX_PROTO_BYTES);
- else
+ else if (ret != -EAGAIN)
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
final_ret = terminate_request(ec_dev);
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index 90e35dec8648..5bddb84cfc1f 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -233,7 +233,8 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
pdata->properties->idx = 0;
pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO;
pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE;
- pdata->properties->irq = pdev->irq;
+ pdata->properties->irq[0] = pdev->irq;
+ pdata->properties->has_irq = true;
pdata->properties->irq_shared = true;
cell->platform_data = pdata;
diff --git a/drivers/mfd/qcom-pm8xxx.c b/drivers/mfd/qcom-pm8xxx.c
index f08758f6b418..e6e8d81c15fd 100644
--- a/drivers/mfd/qcom-pm8xxx.c
+++ b/drivers/mfd/qcom-pm8xxx.c
@@ -563,8 +563,8 @@ static int pm8xxx_probe(struct platform_device *pdev)
pr_info("PMIC revision 2: %02X\n", val);
rev |= val << BITS_PER_BYTE;
- chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
- sizeof(chip->config[0]) * data->num_irqs,
+ chip = devm_kzalloc(&pdev->dev,
+ struct_size(chip, config, data->num_irqs),
GFP_KERNEL);
if (!chip)
return -ENOMEM;
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 00:58:12 +0300