diff options
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mmc/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/mmc/host/cavium-thunderx.c | 6 | ||||
-rw-r--r-- | drivers/mmc/host/cavium.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/dw_mmc-zx.h | 1 | ||||
-rw-r--r-- | drivers/mmc/host/dw_mmc.c | 107 | ||||
-rw-r--r-- | drivers/mmc/host/meson-gx-mmc.c | 26 | ||||
-rw-r--r-- | drivers/mmc/host/pxamci.c | 6 | ||||
-rw-r--r-- | drivers/mmc/host/pxamci.h | 1 | ||||
-rw-r--r-- | drivers/mmc/host/renesas_sdhi_internal_dmac.c | 17 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-pci-core.c | 17 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-pci.h | 1 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-xenon.c | 24 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-xenon.h | 1 | ||||
-rw-r--r-- | drivers/mmc/host/tmio_mmc_core.c | 60 |
15 files changed, 189 insertions, 83 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 02179ed2a40d..8c15637178ff 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -5,7 +5,7 @@ comment "MMC/SD/SDIO Host Controller Drivers" config MMC_DEBUG - bool "MMC host drivers debugginG" + bool "MMC host drivers debugging" depends on MMC != n help This is an option for use by developers; most people should diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 303f5cd46cd9..7c7b29ff591a 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for MMC/SD host controller drivers # diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c index b9cc95998799..eee08d81b242 100644 --- a/drivers/mmc/host/cavium-thunderx.c +++ b/drivers/mmc/host/cavium-thunderx.c @@ -7,6 +7,7 @@ * * Copyright (C) 2016 Cavium Inc. */ +#include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/mmc/mmc.h> @@ -149,8 +150,11 @@ error: for (i = 0; i < CAVIUM_MAX_MMC; i++) { if (host->slot[i]) cvm_mmc_of_slot_remove(host->slot[i]); - if (host->slot_pdev[i]) + if (host->slot_pdev[i]) { + get_device(&host->slot_pdev[i]->dev); of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL); + put_device(&host->slot_pdev[i]->dev); + } } clk_disable_unprepare(host->clk); return ret; diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c index 27fb625cbcf3..fbd29f00fca0 100644 --- a/drivers/mmc/host/cavium.c +++ b/drivers/mmc/host/cavium.c @@ -1038,7 +1038,7 @@ int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host) */ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD | - MMC_CAP_3_3V_DDR | MMC_CAP_NO_BOUNCE_BUFF; + MMC_CAP_3_3V_DDR; if (host->use_sg) mmc->max_segs = 16; diff --git a/drivers/mmc/host/dw_mmc-zx.h b/drivers/mmc/host/dw_mmc-zx.h index f369997a39ec..09ac52766f14 100644 --- a/drivers/mmc/host/dw_mmc-zx.h +++ b/drivers/mmc/host/dw_mmc-zx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _DW_MMC_ZX_H_ #define _DW_MMC_ZX_H_ diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 860313bd952a..4f2806720c5c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -401,16 +401,37 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) static inline void dw_mci_set_cto(struct dw_mci *host) { unsigned int cto_clks; + unsigned int cto_div; unsigned int cto_ms; + unsigned long irqflags; cto_clks = mci_readl(host, TMOUT) & 0xff; - cto_ms = DIV_ROUND_UP(cto_clks, host->bus_hz / 1000); + cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; + if (cto_div == 0) + cto_div = 1; + cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz); /* add a bit spare time */ cto_ms += 10; - mod_timer(&host->cto_timer, - jiffies + msecs_to_jiffies(cto_ms) + 1); + /* + * The durations we're working with are fairly short so we have to be + * extra careful about synchronization here. Specifically in hardware a + * command timeout is _at most_ 5.1 ms, so that means we expect an + * interrupt (either command done or timeout) to come rather quickly + * after the mci_writel. ...but just in case we have a long interrupt + * latency let's add a bit of paranoia. + * + * In general we'll assume that at least an interrupt will be asserted + * in hardware by the time the cto_timer runs. ...and if it hasn't + * been asserted in hardware by that time then we'll assume it'll never + * come. + */ + spin_lock_irqsave(&host->irq_lock, irqflags); + if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events)) + mod_timer(&host->cto_timer, + jiffies + msecs_to_jiffies(cto_ms) + 1); + spin_unlock_irqrestore(&host->irq_lock, irqflags); } static void dw_mci_start_command(struct dw_mci *host, @@ -425,11 +446,11 @@ static void dw_mci_start_command(struct dw_mci *host, wmb(); /* drain writebuffer */ dw_mci_wait_while_busy(host, cmd_flags); + mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); + /* response expected command only */ if (cmd_flags & SDMMC_CMD_RESP_EXP) dw_mci_set_cto(host); - - mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); } static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data) @@ -1915,10 +1936,15 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data) static void dw_mci_set_drto(struct dw_mci *host) { unsigned int drto_clks; + unsigned int drto_div; unsigned int drto_ms; drto_clks = mci_readl(host, TMOUT) >> 8; - drto_ms = DIV_ROUND_UP(drto_clks, host->bus_hz / 1000); + drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; + if (drto_div == 0) + drto_div = 1; + drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div, + host->bus_hz); /* add a bit spare time */ drto_ms += 10; @@ -1926,6 +1952,24 @@ static void dw_mci_set_drto(struct dw_mci *host) mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms)); } +static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) +{ + if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events)) + return false; + + /* + * Really be certain that the timer has stopped. This is a bit of + * paranoia and could only really happen if we had really bad + * interrupt latency and the interrupt routine and timeout were + * running concurrently so that the del_timer() in the interrupt + * handler couldn't run. + */ + WARN_ON(del_timer_sync(&host->cto_timer)); + clear_bit(EVENT_CMD_COMPLETE, &host->pending_events); + + return true; +} + static void dw_mci_tasklet_func(unsigned long priv) { struct dw_mci *host = (struct dw_mci *)priv; @@ -1952,8 +1996,7 @@ static void dw_mci_tasklet_func(unsigned long priv) case STATE_SENDING_CMD11: case STATE_SENDING_CMD: - if (!test_and_clear_bit(EVENT_CMD_COMPLETE, - &host->pending_events)) + if (!dw_mci_clear_pending_cmd_complete(host)) break; cmd = host->cmd; @@ -2122,8 +2165,7 @@ static void dw_mci_tasklet_func(unsigned long priv) /* fall through */ case STATE_SENDING_STOP: - if (!test_and_clear_bit(EVENT_CMD_COMPLETE, - &host->pending_events)) + if (!dw_mci_clear_pending_cmd_complete(host)) break; /* CMD error in data command */ @@ -2570,6 +2612,8 @@ done: static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) { + del_timer(&host->cto_timer); + if (!host->cmd_status) host->cmd_status = status; @@ -2594,6 +2638,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) struct dw_mci *host = dev_id; u32 pending; struct dw_mci_slot *slot = host->slot; + unsigned long irqflags; pending = mci_readl(host, MINTSTS); /* read-only mask reg */ @@ -2601,8 +2646,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) /* Check volt switch first, since it can look like an error */ if ((host->state == STATE_SENDING_CMD11) && (pending & SDMMC_INT_VOLT_SWITCH)) { - unsigned long irqflags; - mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH); pending &= ~SDMMC_INT_VOLT_SWITCH; @@ -2618,11 +2661,15 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & DW_MCI_CMD_ERROR_FLAGS) { + spin_lock_irqsave(&host->irq_lock, irqflags); + del_timer(&host->cto_timer); mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); host->cmd_status = pending; smp_wmb(); /* drain writebuffer */ set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + + spin_unlock_irqrestore(&host->irq_lock, irqflags); } if (pending & DW_MCI_DATA_ERROR_FLAGS) { @@ -2662,9 +2709,12 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & SDMMC_INT_CMD_DONE) { - del_timer(&host->cto_timer); + spin_lock_irqsave(&host->irq_lock, irqflags); + mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); dw_mci_cmd_interrupt(host, pending); + + spin_unlock_irqrestore(&host->irq_lock, irqflags); } if (pending & SDMMC_INT_CD) { @@ -2938,7 +2988,35 @@ static void dw_mci_cmd11_timer(unsigned long arg) static void dw_mci_cto_timer(unsigned long arg) { struct dw_mci *host = (struct dw_mci *)arg; + unsigned long irqflags; + u32 pending; + spin_lock_irqsave(&host->irq_lock, irqflags); + + /* + * If somehow we have very bad interrupt latency it's remotely possible + * that the timer could fire while the interrupt is still pending or + * while the interrupt is midway through running. Let's be paranoid + * and detect those two cases. Note that this is paranoia is somewhat + * justified because in this function we don't actually cancel the + * pending command in the controller--we just assume it will never come. + */ + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ + if (pending & (DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_CMD_DONE)) { + /* The interrupt should fire; no need to act but we can warn */ + dev_warn(host->dev, "Unexpected interrupt latency\n"); + goto exit; + } + if (test_bit(EVENT_CMD_COMPLETE, &host->pending_events)) { + /* Presumably interrupt handler couldn't delete the timer */ + dev_warn(host->dev, "CTO timeout when already completed\n"); + goto exit; + } + + /* + * Continued paranoia to make sure we're in the state we expect. + * This paranoia isn't really justified but it seems good to be safe. + */ switch (host->state) { case STATE_SENDING_CMD11: case STATE_SENDING_CMD: @@ -2957,6 +3035,9 @@ static void dw_mci_cto_timer(unsigned long arg) host->state); break; } + +exit: + spin_unlock_irqrestore(&host->irq_lock, irqflags); } static void dw_mci_dto_timer(unsigned long arg) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index c885c2d4b904..85745ef179e2 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -531,8 +531,7 @@ static int meson_mmc_clk_init(struct meson_host *host) div->shift = __ffs(CLK_DIV_MASK); div->width = __builtin_popcountl(CLK_DIV_MASK); div->hw.init = &init; - div->flags = (CLK_DIVIDER_ONE_BASED | - CLK_DIVIDER_ROUND_CLOSEST); + div->flags = CLK_DIVIDER_ONE_BASED; clk = devm_clk_register(host->dev, &div->hw); if (WARN_ON(IS_ERR(clk))) @@ -717,6 +716,22 @@ static int meson_mmc_clk_phase_tuning(struct mmc_host *mmc, u32 opcode, static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct meson_host *host = mmc_priv(mmc); + int ret; + + /* + * If this is the initial tuning, try to get a sane Rx starting + * phase before doing the actual tuning. + */ + if (!mmc->doing_retune) { + ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); + + if (ret) + return ret; + } + + ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->tx_clk); + if (ret) + return ret; return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); } @@ -746,6 +761,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_UP: if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + /* Reset phases */ + clk_set_phase(host->rx_clk, 0); + clk_set_phase(host->tx_clk, 270); + break; case MMC_POWER_ON: @@ -759,8 +779,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->vqmmc_enabled = true; } - /* Reset rx phase */ - clk_set_phase(host->rx_clk, 0); break; } diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 59ab194cb009..c763b404510f 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -702,11 +702,7 @@ static int pxamci_probe(struct platform_device *pdev) pxamci_init_ocr(host); - /* - * This architecture used to disable bounce buffers through its - * defconfig, now it is done at runtime as a host property. - */ - mmc->caps = MMC_CAP_NO_BOUNCE_BUFF; + mmc->caps = 0; host->cmdat = 0; if (!cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h index f6c2e2fcce37..d301ca18c5d4 100644 --- a/drivers/mmc/host/pxamci.h +++ b/drivers/mmc/host/pxamci.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #define MMC_STRPCL 0x0000 #define STOP_CLOCK (1 << 0) #define START_CLOCK (2 << 0) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index f905f2361d12..8bae88a150fd 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -146,11 +146,8 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host, WARN_ON(host->sg_len > 1); /* This DMAC cannot handle if buffer is not 8-bytes alignment */ - if (!IS_ALIGNED(sg->offset, 8)) { - host->force_pio = true; - renesas_sdhi_internal_dmac_enable_dma(host, false); - return; - } + if (!IS_ALIGNED(sg->offset, 8)) + goto force_pio; if (data->flags & MMC_DATA_READ) { dtran_mode |= DTRAN_MODE_CH_NUM_CH1; @@ -163,8 +160,8 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host, } ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, dir); - if (ret < 0) - return; + if (ret == 0) + goto force_pio; renesas_sdhi_internal_dmac_enable_dma(host, true); @@ -176,6 +173,12 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host, dtran_mode); renesas_sdhi_internal_dmac_dm_write(host, DM_DTRAN_ADDR, sg->dma_address); + + return; + +force_pio: + host->force_pio = true; + renesas_sdhi_internal_dmac_enable_dma(host, false); } static void renesas_sdhi_internal_dmac_issue_tasklet_fn(unsigned long arg) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index bbaddf18a1b3..67d787fa3306 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -392,6 +392,7 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { enum { INTEL_DSM_FNS = 0, + INTEL_DSM_V18_SWITCH = 3, INTEL_DSM_DRV_STRENGTH = 9, INTEL_DSM_D3_RETUNE = 10, }; @@ -447,6 +448,8 @@ static void intel_dsm_init(struct intel_host *intel_host, struct device *dev, int err; u32 val; + intel_host->d3_retune = true; + err = __intel_dsm(intel_host, dev, INTEL_DSM_FNS, &intel_host->dsm_fns); if (err) { pr_debug("%s: DSM not supported, error %d\n", @@ -557,6 +560,19 @@ static void intel_hs400_enhanced_strobe(struct mmc_host *mmc, sdhci_writel(host, val, INTEL_HS400_ES_REG); } +static void sdhci_intel_voltage_switch(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct intel_host *intel_host = sdhci_pci_priv(slot); + struct device *dev = &slot->chip->pdev->dev; + u32 result = 0; + int err; + + err = intel_dsm(intel_host, dev, INTEL_DSM_V18_SWITCH, &result); + pr_debug("%s: %s DSM error %d result %u\n", + mmc_hostname(host->mmc), __func__, err, result); +} + static const struct sdhci_ops sdhci_intel_byt_ops = { .set_clock = sdhci_set_clock, .set_power = sdhci_intel_set_power, @@ -565,6 +581,7 @@ static const struct sdhci_ops sdhci_intel_byt_ops = { .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .hw_reset = sdhci_pci_hw_reset, + .voltage_switch = sdhci_intel_voltage_switch, }; static void byt_read_dsm(struct sdhci_pci_slot *slot) diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 75196a2b5289..3e8ea3e566f6 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __SDHCI_PCI_H #define __SDHCI_PCI_H diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c index 2eec2e652c53..0842bbc2d7ad 100644 --- a/drivers/mmc/host/sdhci-xenon.c +++ b/drivers/mmc/host/sdhci-xenon.c @@ -466,6 +466,7 @@ static int xenon_probe(struct platform_device *pdev) { struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; + struct xenon_priv *priv; int err; host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata, @@ -474,6 +475,7 @@ static int xenon_probe(struct platform_device *pdev) return PTR_ERR(host); pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); /* * Link Xenon specific mmc_host_ops function, @@ -491,9 +493,20 @@ static int xenon_probe(struct platform_device *pdev) if (err) goto free_pltfm; + priv->axi_clk = devm_clk_get(&pdev->dev, "axi"); + if (IS_ERR(priv->axi_clk)) { + err = PTR_ERR(priv->axi_clk); + if (err == -EPROBE_DEFER) + goto err_clk; + } else { + err = clk_prepare_enable(priv->axi_clk); + if (err) + goto err_clk; + } + err = mmc_of_parse(host->mmc); if (err) - goto err_clk; + goto err_clk_axi; sdhci_get_of_property(pdev); @@ -502,11 +515,11 @@ static int xenon_probe(struct platform_device *pdev) /* Xenon specific dt parse */ err = xenon_probe_dt(pdev); if (err) - goto err_clk; + goto err_clk_axi; err = xenon_sdhc_prepare(host); if (err) - goto err_clk; + goto err_clk_axi; pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); @@ -527,6 +540,8 @@ remove_sdhc: pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); xenon_sdhc_unprepare(host); +err_clk_axi: + clk_disable_unprepare(priv->axi_clk); err_clk: clk_disable_unprepare(pltfm_host->clk); free_pltfm: @@ -538,6 +553,7 @@ static int xenon_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); pm_runtime_get_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -546,7 +562,7 @@ static int xenon_remove(struct platform_device *pdev) sdhci_remove_host(host, 0); xenon_sdhc_unprepare(host); - + clk_disable_unprepare(priv->axi_clk); clk_disable_unprepare(pltfm_host->clk); sdhci_pltfm_free(pdev); diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h index 2bc0510c0769..9994995c7c56 100644 --- a/drivers/mmc/host/sdhci-xenon.h +++ b/drivers/mmc/host/sdhci-xenon.h @@ -83,6 +83,7 @@ struct xenon_priv { unsigned char bus_width; unsigned char timing; unsigned int clock; + struct clk *axi_clk; int phy_type; /* diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 12cf8288d663..9c4e6199b854 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -47,6 +47,7 @@ #include <linux/mmc/sdio.h> #include <linux/scatterlist.h> #include <linux/spinlock.h> +#include <linux/swiotlb.h> #include <linux/workqueue.h> #include "tmio_mmc.h" @@ -129,50 +130,6 @@ static int tmio_mmc_next_sg(struct tmio_mmc_host *host) #define CMDREQ_TIMEOUT 5000 -#ifdef CONFIG_MMC_DEBUG - -#define STATUS_TO_TEXT(a, status, i) \ - do { \ - if ((status) & TMIO_STAT_##a) { \ - if ((i)++) \ - printk(KERN_DEBUG " | "); \ - printk(KERN_DEBUG #a); \ - } \ - } while (0) - -static void pr_debug_status(u32 status) -{ - int i = 0; - - pr_debug("status: %08x = ", status); - STATUS_TO_TEXT(CARD_REMOVE, status, i); - STATUS_TO_TEXT(CARD_INSERT, status, i); - STATUS_TO_TEXT(SIGSTATE, status, i); - STATUS_TO_TEXT(WRPROTECT, status, i); - STATUS_TO_TEXT(CARD_REMOVE_A, status, i); - STATUS_TO_TEXT(CARD_INSERT_A, status, i); - STATUS_TO_TEXT(SIGSTATE_A, status, i); - STATUS_TO_TEXT(CMD_IDX_ERR, status, i); - STATUS_TO_TEXT(STOPBIT_ERR, status, i); - STATUS_TO_TEXT(ILL_FUNC, status, i); - STATUS_TO_TEXT(CMD_BUSY, status, i); - STATUS_TO_TEXT(CMDRESPEND, status, i); - STATUS_TO_TEXT(DATAEND, status, i); - STATUS_TO_TEXT(CRCFAIL, status, i); - STATUS_TO_TEXT(DATATIMEOUT, status, i); - STATUS_TO_TEXT(CMDTIMEOUT, status, i); - STATUS_TO_TEXT(RXOVERFLOW, status, i); - STATUS_TO_TEXT(TXUNDERRUN, status, i); - STATUS_TO_TEXT(RXRDY, status, i); - STATUS_TO_TEXT(TXRQ, status, i); - STATUS_TO_TEXT(ILL_ACCESS, status, i); - printk("\n"); -} - -#else -#define pr_debug_status(s) do { } while (0) -#endif - static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct tmio_mmc_host *host = mmc_priv(mmc); @@ -762,9 +719,6 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid) status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask; - pr_debug_status(status); - pr_debug_status(ireg); - /* Clear the status except the interrupt status */ sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, TMIO_MASK_IRQ); @@ -1262,6 +1216,18 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, mmc->max_blk_count = pdata->max_blk_count ? : (PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + /* + * Since swiotlb has memory size limitation, this will calculate + * the maximum size locally (because we don't have any APIs for it now) + * and check the current max_req_size. And then, this will update + * the max_req_size if needed as a workaround. + */ + if (swiotlb_max_segment()) { + unsigned int max_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE; + + if (mmc->max_req_size > max_size) + mmc->max_req_size = max_size; + } mmc->max_seg_size = mmc->max_req_size; _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || |