diff options
Diffstat (limited to 'drivers/mtd/chips')
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0002.c | 53 |
1 files changed, 27 insertions, 26 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 7d29f596bc9e..bac7c82e227a 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -1979,41 +1979,42 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, * the failure due to scheduling. */ if (time_after(jiffies, timeo) && - !chip_good(map, chip, adr, datum)) + !chip_good(map, chip, adr, datum)) { + ret = -EIO; break; - - if (chip_good(map, chip, adr, datum)) { - xip_enable(map, chip, adr); - goto op_done; } + if (chip_good(map, chip, adr, datum)) + break; + /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } - /* - * Recovery from write-buffer programming failures requires - * the write-to-buffer-reset sequence. Since the last part - * of the sequence also works as a normal reset, we can run - * the same commands regardless of why we are here. - * See e.g. - * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf - */ - cfi_check_err_status(map, chip, adr); - cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); - xip_enable(map, chip, adr); - /* FIXME - should have reset delay before continuing */ + if (ret) { + /* + * Recovery from write-buffer programming failures requires + * the write-to-buffer-reset sequence. Since the last part + * of the sequence also works as a normal reset, we can run + * the same commands regardless of why we are here. + * See e.g. + * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf + */ + cfi_check_err_status(map, chip, adr); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + /* FIXME - should have reset delay before continuing */ + + pr_err("MTD %s(): software timeout, address:0x%.8lx.\n", + __func__, adr); + } - printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n", - __func__, adr); + xip_enable(map, chip, adr); - ret = -EIO; - op_done: chip->state = FL_READY; DISABLE_VPP(map); put_chip(map, chip, adr); |